Add security patch and create release.

Tags will be OpenSSL_0_9_6b and OpenSSL-engine-0_9_6b

CHANGES

@@ -2,9 +2,176 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 0.9.6 and 0.9.6a  [xx XXX 2001]
+ Changes between 0.9.6a and 0.9.6b  [9 Jul 2001]
 
-  *) Fix a memory leak in err.c: free err_data string if necessary.
+  *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
+     to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
+     Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
+     PRNG state recovery was possible based on the output of
+     one PRNG request appropriately sized to gain knowledge on
+     'md' followed by enough consecutive 1-byte PRNG requests
+     to traverse all of 'state'.
+
+     1. When updating 'md_local' (the current thread's copy of 'md')
+        during PRNG output generation, hash all of the previous
+        'md_local' value, not just the half used for PRNG output.
+
+     2. Make the number of bytes from 'state' included into the hash
+        independent from the number of PRNG bytes requested.
+
+     The first measure alone would be sufficient to avoid
+     Markku-Juhani's attack.  (Actually it had never occurred
+     to me that the half of 'md_local' used for chaining was the
+     half from which PRNG output bytes were taken -- I had always
+     assumed that the secret half would be used.)  The second
+     measure makes sure that additional data from 'state' is never
+     mixed into 'md_local' in small portions; this heuristically
+     further strengthens the PRNG.
+     [Bodo Moeller]
+
+  *) Fix crypto/bn/asm/mips3.s.
+     [Andy Polyakov]
+
+  *) When only the key is given to "enc", the IV is undefined. Print out
+     an error message in this case.
+     [Lutz Jaenicke]
+
+  *) Handle special case when X509_NAME is empty in X509 printing routines.
+     [Steve Henson]
+
+  *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
+     positive and less than q.
+     [Bodo Moeller]
+
+  *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
+     used: it isn't thread safe and the add_lock_callback should handle
+     that itself.
+     [Paul Rose <Paul.Rose@bridge.com>]
+
+  *) Verify that incoming data obeys the block size in
+     ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
+     [Bodo Moeller]
+
+  *) Fix OAEP check.
+     [Ulf M<>ller, Bodo M<>ller]
+
+  *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
+     RSA encryption was accidentily removed in s3_srvr.c in OpenSSL 0.9.5
+     when fixing the server behaviour for backwards-compatible 'client
+     hello' messages.  (Note that the attack is impractical against
+     SSL 3.0 and TLS 1.0 anyway because length and version checking
+     means that the probability of guessing a valid ciphertext is
+     around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
+     paper.)
+
+     Before 0.9.5, the countermeasure (hide the error by generating a
+     random 'decryption result') did not work properly because
+     ERR_clear_error() was missing, meaning that SSL_get_error() would
+     detect the supposedly ignored error.
+
+     Both problems are now fixed.
+     [Bodo Moeller]
+
+  *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
+     (previously it was 1024).
+     [Bodo Moeller]
+
+  *) Fix for compatibility mode trust settings: ignore trust settings
+     unless some valid trust or reject settings are present.
+     [Steve Henson]
+
+  *) Fix for blowfish EVP: its a variable length cipher.
+     [Steve Henson]
+
+  *) Fix various bugs related to DSA S/MIME verification. Handle missing
+     parameters in DSA public key structures and return an error in the
+     DSA routines if parameters are absent.
+     [Steve Henson]
+
+  *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
+     in the current directory if neither $RANDFILE nor $HOME was set.
+     RAND_file_name() in 0.9.6a returned NULL in this case.  This has
+     caused some confusion to Windows users who haven't defined $HOME.
+     Thus RAND_file_name() is changed again: e_os.h can define a
+     DEFAULT_HOME, which will be used if $HOME is not set.
+     For Windows, we use "C:"; on other platforms, we still require
+     environment variables.
+
+  *) Move 'if (!initialized) RAND_poll()' into regions protected by
+     CRYPTO_LOCK_RAND.  This is not strictly necessary, but avoids
+     having multiple threads call RAND_poll() concurrently.
+     [Bodo Moeller]
+
+  *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
+     combination of a flag and a thread ID variable.
+     Otherwise while one thread is in ssleay_rand_bytes (which sets the
+     flag), *other* threads can enter ssleay_add_bytes without obeying
+     the CRYPTO_LOCK_RAND lock (and may even illegaly release the lock
+     that they do not hold after the first thread unsets add_do_not_lock).
+     [Bodo Moeller]
+
+  *) Change bctest again: '-x' expressions are not available in all
+     versions of 'test'.
+     [Bodo Moeller]
+
+ Changes between 0.9.6 and 0.9.6a  [5 Apr 2001]
+
+  *) Fix a couple of memory leaks in PKCS7_dataDecode()
+     [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
+
+  *) Change Configure and Makefiles to provide EXE_EXT, which will contain
+     the default extension for executables, if any.  Also, make the perl
+     scripts that use symlink() to test if it really exists and use "cp"
+     if it doesn't.  All this made OpenSSL compilable and installable in
+     CygWin.
+     [Richard Levitte]
+
+  *) Fix for asn1_GetSequence() for indefinite length constructed data.
+     If SEQUENCE is length is indefinite just set c->slen to the total
+     amount of data available.
+     [Steve Henson, reported by shige@FreeBSD.org]
+     [This change does not apply to 0.9.7.]
+
+  *) Change bctest to avoid here-documents inside command substitution
+     (workaround for FreeBSD /bin/sh bug).
+     For compatibility with Ultrix, avoid shell functions (introduced
+     in the bctest version that searches along $PATH).
+     [Bodo Moeller]
+
+  *) Rename 'des_encrypt' to 'des_encrypt1'.  This avoids the clashes
+     with des_encrypt() defined on some operating systems, like Solaris
+     and UnixWare.
+     [Richard Levitte]
+
+  *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
+     On the Importance of Eliminating Errors in Cryptographic
+     Computations, J. Cryptology 14 (2001) 2, 101-119,
+     http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
+     [Ulf Moeller]
+  
+  *) MIPS assembler BIGNUM division bug fix. 
+     [Andy Polyakov]
+
+  *) Disabled incorrect Alpha assembler code.
+     [Richard Levitte]
+
+  *) Fix PKCS#7 decode routines so they correctly update the length
+     after reading an EOC for the EXPLICIT tag.
+     [Steve Henson]
+     [This change does not apply to 0.9.7.]
+
+  *) Fix bug in PKCS#12 key generation routines. This was triggered
+     if a 3DES key was generated with a 0 initial byte. Include
+     PKCS12_BROKEN_KEYGEN compilation option to retain the old
+     (but broken) behaviour.
+     [Steve Henson]
+
+  *) Enhance bctest to search for a working bc along $PATH and print
+     it when found.
+     [Tim Rice <tim@multitalents.net> via Richard Levitte]
+
+  *) Fix memory leaks in err.c: free err_data string if necessary;
+     don't write to the wrong index in ERR_set_error_data.
      [Bodo Moeller]
 
   *) Implement ssl23_peek (analogous to ssl23_read), which previously
@@ -21,15 +188,6 @@
      X509_NAME_get_index_by_NID() since 0 is a valid index.
      [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
 
-  *) Use better test patterns in bntest.
-     [Ulf M<>ller]
-
-  *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
-     the method-specific "init()" handler. Also clean up ex_data after
-     calling the method-specific "finish()" handler. Previously, this was
-     happening the other way round.
-     [Geoff Thorpe]
-
   *) Avoid coredump with unsupported or invalid public keys by checking if
      X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
      PKCS7_verify() fails with non detached data.
@@ -62,6 +220,7 @@
   *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
      was empty.
      [Steve Henson]
+     [This change does not apply to 0.9.7.]
 
   *) Use the cached encoding of an X509_NAME structure rather than
      copying it. This is apparently the reason for the libsafe "errors"
@@ -73,7 +232,7 @@
      Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
      to be set and top=0 forces the highest bit to be set; top=-1 is new
      and leaves the highest bit random.
-     [Ulf Moeller]
+     [Ulf Moeller, Bodo Moeller]
 
   *) In the NCONF_...-based implementations for CONF_... queries
      (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
@@ -102,6 +261,7 @@
      macros previously used would not encode an empty SEQUENCE OF
      and break the signature.
      [Steve Henson]
+     [This change does not apply to 0.9.7.]
 
   *) Zero the premaster secret after deriving the master secret in
      DH ciphersuites.
@@ -154,12 +314,19 @@
   *) Fix a deadlock in CRYPTO_mem_leaks().
      [Bodo Moeller]
 
+  *) Use better test patterns in bntest.
+     [Ulf M<>ller]
+
   *) rand_win.c fix for Borland C.
      [Ulf M<>ller]
  
   *) BN_rshift bugfix for n == 0.
      [Bodo Moeller]
 
+  *) Add a 'bctest' script that checks for some known 'bc' bugs
+     so that 'make test' does not abort just because 'bc' is broken.
+     [Bodo Moeller]
+
   *) Store verify_result within SSL_SESSION also for client side to
      avoid potential security hole. (Re-used sessions on the client side
      always resulted in verify_result==X509_V_OK, not using the original
@@ -182,13 +349,40 @@
      does the actual work for ssl3_read_internal.
      [Bodo Moeller]
 
+  *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
+     the method-specific "init()" handler. Also clean up ex_data after
+     calling the method-specific "finish()" handler. Previously, this was
+     happening the other way round.
+     [Geoff Thorpe]
+
   *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
      The previous value, 12, was not always sufficient for BN_mod_exp().
      [Bodo Moeller]
 
+  *) Make sure that shared libraries get the internal name engine with
+     the full version number and not just 0.  This should mark the
+     shared libraries as not backward compatible.  Of course, this should
+     be changed again when we can guarantee backward binary compatibility.
+     [Richard Levitte]
+
   *) Fix typo in get_cert_by_subject() in by_dir.c
      [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
 
+  *) Rework the system to generate shared libraries:
+
+     - Make note of the expected extension for the shared libraries and
+       if there is a need for symbolic links from for example libcrypto.so.0
+       to libcrypto.so.0.9.7.  There is extended info in Configure for
+       that.
+
+     - Make as few rebuilds of the shared libraries as possible.
+
+     - Still avoid linking the OpenSSL programs with the shared libraries.
+
+     - When installing, install the shared libraries separately from the
+       static ones.
+     [Richard Levitte]
+
   *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
 
      Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
@@ -2281,7 +2475,7 @@
                                      copied!)
      [Bodo Moeller]
 
-  *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
+  *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
      worked.
 
   *) Fix problems with no-hmac etc.

Configure

@@ -10,7 +10,7 @@ use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [rsaref] [no-threads] [no-asm] [no-dso] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no-threads] [no-asm] [no-dso] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -23,20 +23,11 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 #               default).  This needn't be set in advance, you can
 #               just as well use "make INSTALL_PREFIX=/whatever install".
 #
-# no-hw-xxx     do not compile support for specific crypto hardware.
-#               Generic OpenSSL-style methods relating to this support
-#               are always compiled but return NULL if the hardware
-#               support isn't compiled.
-# no-hw         do not compile support for any crypto hardware.
 # rsaref        use RSAref
 # [no-]threads  [don't] try to create a library that is suitable for
 #               multithreaded applications (default is "threads" if we
 #               know how to do it)
 # [no-]shared	[don't] try to create shared libraries when supported.
-#               IT IS NOT RECOMMENDED TO USE "shared"!  Since this is a
-#               development branch, the positions of the ENGINE symbols
-#               in the transfer vector are constantly moving, so binary
-#               backward compatibility can't be guaranteed in any way.
 # no-asm        do not use assembler
 # no-dso        do not compile in any native shared-library methods. This
 #               will ensure that all methods just return NULL.
@@ -98,6 +89,11 @@ my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
 
+my $mips3_irix_asm="asm/mips3.o::::::::";
+# There seems to be boundary faults in asm/alpha.s.
+#my $alpha_asm="asm/alpha.o::::::::";
+my $alpha_asm="::::::::";
+
 # -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
 # So the md5_locl.h file has an undef B_ENDIAN if sun is defined
 
@@ -136,32 +132,35 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+#### Solaris x86 with Sun C setups
+"solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC",
-"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
-"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC",
+"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
 # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # SC5.0 note: Compiler common patch 107357-01 or later is required!
-"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC",
-"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC",
-"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC",
-"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:/usr/ccs/bin/ar rs",
+"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
 ####
-"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC",
-"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC",
+"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Linux setups
 "linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
@@ -187,11 +186,11 @@ my %table=(
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
 # './Configure irix-[g]cc' manually.
 # -mips4 flag is added by ./config when appropriate.
-"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
-"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}",
+"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}",
 
 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -271,10 +270,10 @@ my %table=(
 # Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with
 # the new compiler
 # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version
-"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:asm/alpha.o:::::::::dlfcn:true64-shared",
-"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared",
-"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared",
-"FreeBSD-alpha","gcc:-DTERMIOS -O -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::",
+"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:${alpha_asm}:dlfcn:tru64-shared::.so",
+"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:tru64-shared::.so",
+"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:tru64-shared::.so",
+"FreeBSD-alpha","gcc:-DTERMIOS -O -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Alpha Linux with GNU C and Compaq C setups
 # Special notes:
@@ -289,17 +288,17 @@ my %table=(
 #
 #					<appro@fy.chalmers.se>
 #
-"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o:::::::::dlfcn:linux-shared:-fPIC",
-"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o:::::::::dlfcn:linux-shared:-fPIC",
-"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::",
-"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::",
+"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
+"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
 
 # assembler versions -- currently defunct:
-##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::",
+##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:${alpha_asm}",
 
 # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
 # bn86-elf.o file file since it is hand tweaked assembler.
-"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT:-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC",
+"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT:-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
@@ -308,13 +307,13 @@ my %table=(
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::",
 "linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::",
 "linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::SIXTY_FOUR_BIT_LONG::",
-"NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:",
-"FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown)::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
-"bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "nextstep",	"cc:-O -Wall:<libc.h>:(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 # NCR MP-RAS UNIX ver 02.03.01
@@ -324,18 +323,27 @@ my %table=(
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown)::${x86_gcc_des} ${x86_gcc_opts}:",
 
 # Linux on ARM
-"linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC",
+"linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-# UnixWare 2.0
-"unixware-2.0","cc:-O -DFILIO_H::(unknown):-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-O -DFILIO_H -Kpentium -Kthread::(unknown):-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+# UnixWare 2.0x fails destest with -O
+"unixware-2.0","cc:-DFILIO_H::-Kthread:-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
+"unixware-2.0-pentium","cc:-DFILIO_H -Kpentium::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+
+# UnixWare 2.1
+"unixware-2.1","cc:-O -DFILIO_H::-Kthread:-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
+"unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 
 # UnixWare 7
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 
 # IBM's AIX.
 "aix-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown)::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR:::",
+"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown)::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR::::::::::dlfcn:",
 
 #
 # Cray T90 (SDSC)
@@ -362,12 +370,16 @@ my %table=(
 
 # DGUX, 88100.
 "dgux-R3-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::RC4_INDEX DES_UNROLL:::",
-"dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown):-lnsl -lsocket:RC4_INDEX:RC4_INDEX DES_UNROLL:::",
+"dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown):-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown):-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 
+# SCO 3 - Tim Rice <tim@multitalents.net>
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown):-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+
 # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
 # SCO cc.
 "sco5-cc",  "cc:::(unknown):-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
+"sco5-cc-pentium",  "cc:-Kpentium::(unknown):-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
 "sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown):-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
 
 # Sinix/ReliantUNIX RM400
@@ -407,10 +419,10 @@ my %table=(
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown)::::::",
 
 # Some OpenBSD from Bob Beck <beck@obtuse.com>
-"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::",
-"OpenBSD-x86",  "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn",
-"OpenBSD",      "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL:::",
-"OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown):BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::",
+"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-x86",  "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD",      "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown):BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 ##### MacOS X (a.k.a. Rhapsody) setup
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
@@ -425,6 +437,7 @@ my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
 
 my $prefix="";
 my $openssldir="";
+my $exe_ext="";
 my $install_prefix="";
 my $no_threads=0;
 my $no_shared=1;
@@ -500,18 +513,6 @@ PROCESS_ARGS:
 			$flags .= "-DNO_ASM ";
 			$openssl_other_defines .= "#define NO_ASM\n";
 			}
-		elsif (/^no-hw-(.+)$/)
-			{
-			my $hw=$1;
-			$hw =~ tr/[a-z]/[A-Z]/;
-			$flags .= "-DNO_HW_$hw ";
-			$openssl_other_defines .= "#define NO_HW_$hw\n";
-			}
-		elsif (/^no-hw$/)
-			{
-			$flags .= "-DNO_HW ";
-			$openssl_other_defines .= "#define NO_HW\n";
-			}
 		elsif (/^no-dso$/)
 			{ $no_dso=1; }
 		elsif (/^no-threads$/)
@@ -641,6 +642,7 @@ print "Configuring for $target\n";
 
 my $IsWindows=scalar grep /^$target$/,@WinTargets;
 
+$exe_ext=".exe" if ($target eq "CygWin32");
 $openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
 $prefix=$openssldir if $prefix eq "";
 
@@ -654,8 +656,8 @@ $openssldir=$prefix . "/" . $openssldir if $openssldir !~ /^\//;
 print "IsWindows=$IsWindows\n";
 
 (my $cc,my $cflags,my $unistd,my $thread_cflag,my $lflags,my $bn_ops,my $bn_obj,my $des_obj,my $bf_obj,
- $md5_obj,$sha1_obj,my $cast_obj,my $rc4_obj,$rmd160_obj,my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag, my $ranlib)=
-	split(/\s*:\s*/,$table{$target} . ":" x 22 , -1);
+ $md5_obj,$sha1_obj,my $cast_obj,my $rc4_obj,$rmd160_obj,my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,my $shared_extension,my $ranlib)=
+	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 $cflags="$flags$cflags" if ($flags ne "");
 
 # The DSO code currently always implements all functions so that no
@@ -730,15 +732,16 @@ if ($threads)
 	}
 
 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
-my $shared_mark1 = "";
-my $shared_mark2 = "";
-if ($shared_cflag ne "")
+my $shared_mark = "";
+if ($shared_target ne "")
 	{
-	$cflags = "$shared_cflag $cflags";
+	if ($shared_cflag ne "")
+		{
+		$cflags = "$shared_cflag $cflags";
+		}
 	if (!$no_shared)
 		{
-		$shared_mark1 = ".shlib-clean.";
-		$shared_mark2 = ".shlib.";
+		#$shared_mark = "\$(SHARED_LIBS)";
 		}
 	}
 else
@@ -831,6 +834,7 @@ while (<IN>)
 	s/^SHLIB_VERSION_HISTORY=.*/SHLIB_VERSION_HISTORY=$shlib_version_history/;
 	s/^SHLIB_MAJOR=.*/SHLIB_MAJOR=$shlib_major/;
 	s/^SHLIB_MINOR=.*/SHLIB_MINOR=$shlib_minor/;
+	s/^SHLIB_EXT=.*/SHLIB_EXT=$shared_extension/;
 	s/^INSTALLTOP=.*$/INSTALLTOP=$prefix/;
 	s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/;
 	s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/;
@@ -841,6 +845,7 @@ while (<IN>)
 	s/^CFLAG=.*$/CFLAG= $cflags/;
 	s/^DEPFLAG=.*$/DEPFLAG= $depflags/;
 	s/^EX_LIBS=.*$/EX_LIBS= $lflags/;
+	s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/;
 	s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
 	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
 	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
@@ -854,9 +859,9 @@ while (<IN>)
 	s/^RANLIB=.*/RANLIB= $ranlib/;
 	s/^PERL=.*/PERL= $perl/;
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
-	s/^SHLIB_MARK1=.*/SHLIB_MARK1=$shared_mark1/;
-	s/^SHLIB_MARK2=.*/SHLIB_MARK2=$shared_mark2/;
-	s/^LIBS=.*/LIBS=libcrypto\.so\* libssl\.so\*/ if (!$no_shared);
+	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
+	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
+	s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.so.\$(SHLIB_MAJOR) .so/ if ($shared_extension ne "" && $shared_extension !~ /^\.s[ol]$/);
 	print OUT $_."\n";
 	}
 close(IN);
@@ -1143,8 +1148,9 @@ sub print_table_entry
 	(my $cc,my $cflags,my $unistd,my $thread_cflag,my $lflags,my $bn_ops,
 	my $bn_obj,my $des_obj,my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
-	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,my $ranlib)=
-	split(/\s*:\s*/,$table{$target} . ":" x 22 , -1);
+	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,
+	my $shared_extension,my $ranlib)=
+	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 			
 	print <<EOF
 
@@ -1167,6 +1173,7 @@ sub print_table_entry
 \$dso_scheme   = $dso_scheme
 \$shared_target= $shared_target
 \$shared_cflag = $shared_cflag
+\$shared_extension = $shared_extension
 \$ranlib       = $ranlib
 EOF
 	}

FAQ

@@ -1,20 +1,23 @@
 OpenSSL  -  Frequently Asked Questions
 --------------------------------------
 
+[MISC] Miscellaneous questions
+
 * Which is the current version of OpenSSL?
 * Where is the documentation?
 * How can I contact the OpenSSL developers?
-* Do I need patent licenses to use OpenSSL?
-* Is OpenSSL thread-safe?
-* Why do I get a "PRNG not seeded" error message?
-* Why does the linker complain about undefined symbols?
 * Where can I get a compiled version of OpenSSL?
-* I've compiled a program under Windows and it crashes: why?
-* How do I read or write a DER encoded buffer using the ASN1 functions?
-* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
-* I've called <some function> and it fails, why?
-* I just get a load of numbers for the error output, what do they mean?
-* Why do I get errors about unknown algorithms?
+* Why aren't tools like 'autoconf' and 'libtool' used?
+
+[LEGAL] Legal questions
+
+* Do I need patent licenses to use OpenSSL?
+* Can I use OpenSSL with GPL software? 
+
+[USER] Questions on using the OpenSSL applications
+
+* Why do I get a "PRNG not seeded" error message?
+* Why do I get an "unable to write 'random state'" error message?
 * How do I create certificates or certificate requests?
 * Why can't I create certificate requests?
 * Why does <SSL program> fail with a certificate verify error?
@@ -22,17 +25,39 @@ OpenSSL  -  Frequently Asked Questions
 * How can I create DSA certificates?
 * Why can't I make an SSL connection using a DSA certificate?
 * How can I remove the passphrase on a private key?
-* Why can't the OpenSSH configure script detect OpenSSL?
+* Why can't I use OpenSSL certificates with SSL client authentication?
+* Why does my browser give a warning about a mismatched hostname?
+
+[BUILD] Questions about building and testing OpenSSL
+
+* Why does the linker complain about undefined symbols?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
 * Why does the OpenSSL compilation fail on Alpha True64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
+* Why does the OpenSSL compilation fail on Win32 with VC++?
 
+[PROG] Questions about programming with OpenSSL
+
+* Is OpenSSL thread-safe?
+* I've compiled a program under Windows and it crashes: why?
+* How do I read or write a DER encoded buffer using the ASN1 functions?
+* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
+* I've called <some function> and it fails, why?
+* I just get a load of numbers for the error output, what do they mean?
+* Why do I get errors about unknown algorithms?
+* Why can't the OpenSSH configure script detect OpenSSL?
+* Can I use OpenSSL's SSL library with non-blocking I/O?
+* Why doesn't my server application receive a client certificate?
+
+===============================================================================
+
+[MISC] ========================================================================
 
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6 was released on September 24th, 2000.
+OpenSSL 0.9.6b was released on July 9th, 2001.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -78,6 +103,27 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 <URL: http://www.openssl.org>.
 
 
+* Where can I get a compiled version of OpenSSL?
+
+Some applications that use OpenSSL are distributed in binary form.
+When using such an application, you don't need to install OpenSSL
+yourself; the application will include the required parts (e.g. DLLs).
+
+If you want to install OpenSSL on a Windows system and you don't have
+a C compiler, read the "Mingw32" section of INSTALL.W32 for information
+on how to obtain and install the free GNU C compiler.
+
+A number of Linux and *BSD distributions include OpenSSL.
+
+
+* Why aren't tools like 'autoconf' and 'libtool' used?
+
+autoconf will probably be used in future OpenSSL versions. If it was
+less Unix-centric, it might have been used much earlier.
+
+
+[LEGAL] =======================================================================
+
 * Do I need patent licenses to use OpenSSL?
 
 The patents section of the README file lists patents that may apply to
@@ -89,17 +135,25 @@ You can configure OpenSSL so as not to use RC5 and IDEA by using
  ./config no-rc5 no-idea
 
 
-* Is OpenSSL thread-safe?
+* Can I use OpenSSL with GPL software?
 
-Yes (with limitations: an SSL connection may not concurrently be used
-by multiple threads).  On Windows and many Unix systems, OpenSSL
-automatically uses the multi-threaded versions of the standard
-libraries.  If your platform is not one of these, consult the INSTALL
-file.
+On many systems including the major Linux and BSD distributions, yes (the
+GPL does not place restrictions on using libraries that are part of the
+normal operating system distribution).
 
-Multi-threaded applications must provide two callback functions to
-OpenSSL.  This is described in the threads(3) manpage.
+On other systems, the situation is less clear. Some GPL software copyright
+holders claim that you infringe on their rights if you use OpenSSL with
+their software on operating systems that don't normally include OpenSSL.
 
+If you develop open source software that uses OpenSSL, you may find it
+useful to choose an other license than the GPL, or state explicitely that
+"This program is released under the GPL with the additional exemption that
+compiling, linking, and/or using OpenSSL is allowed."  If you are using
+GPL software developed by others, you may want to ask the copyright holder
+for permission to use their software with OpenSSL.
+
+
+[USER] ========================================================================
 
 * Why do I get a "PRNG not seeded" error message?
 
@@ -108,6 +162,7 @@ correctly.  Many open source operating systems provide a "randomness
 device" that serves this purpose.  On other systems, applications have
 to call the RAND_add() or RAND_seed() function with appropriate data
 before generating keys or performing public key encryption.
+(These functions initialize the pseudo-random number generator, PRNG.)
 
 Some broken applications do not do this.  As of version 0.9.5, the
 OpenSSL functions that need randomness report an error if the random
@@ -117,18 +172,36 @@ application you are using.  It is likely that it never worked
 correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
 to perform potentially insecure encryption.
 
-On systems without /dev/urandom, it is a good idea to use the Entropy
-Gathering Demon; see the RAND_egd() manpage for details.
+On systems without /dev/urandom and /dev/random, it is a good idea to
+use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
+details.  Starting with version 0.9.7, OpenSSL will automatically look
+for an EGD socket at /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool and
+/etc/entropy.
 
-Most components of the openssl command line tool try to use the
-file $HOME/.rnd (or $RANDFILE, if this environment variable is set)
-for seeding the PRNG.  If this file does not exist or is too short,
-the "PRNG not seeded" error message may occur.
+Most components of the openssl command line utility automatically try
+to seed the random number generator from a file.  The name of the
+default seeding file is determined as follows: If environment variable
+RANDFILE is set, then it names the seeding file.  Otherwise if
+environment variable HOME is set, then the seeding file is $HOME/.rnd.
+If neither RANDFILE nor HOME is set, versions up to OpenSSL 0.9.6 will
+use file .rnd in the current directory while OpenSSL 0.9.6a uses no
+default seeding file at all.  OpenSSL 0.9.6b and later will behave
+similarly to 0.9.6a, but will use a default of "C:" for HOME on
+Windows systems if the environment variable has not been set.
 
-[Note to OpenSSL 0.9.5 users: The command "openssl rsa" in version
-0.9.5 does not do this and will fail on systems without /dev/urandom
-when trying to password-encrypt an RSA key!  This is a bug in the
-library; try a later version instead.]
+If the default seeding file does not exist or is too short, the "PRNG
+not seeded" error message may occur.
+
+The openssl command line utility will write back a new state to the
+default seeding file (and create this file if necessary) unless
+there was no sufficient seeding.
+
+Pointing $RANDFILE to an Entropy Gathering Daemon socket does not work.
+Use the "-rand" option of the OpenSSL command line tools instead.
+The $RANDFILE environment variable and $HOME/.rnd are only used by the
+OpenSSL command line tools. Applications using the OpenSSL library
+provide their own configuration options to specify the entropy source,
+please check out the documentation coming the with application.
 
 For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
 installing the SUNski package from Sun patch 105710-01 (Sparc) which
@@ -138,6 +211,113 @@ versions.  However, be warned that /dev/random is usually a blocking
 device, which may have some effects on OpenSSL.
 
 
+* Why do I get an "unable to write 'random state'" error message?
+
+
+Sometimes the openssl command line utility does not abort with
+a "PRNG not seeded" error message, but complains that it is
+"unable to write 'random state'".  This message refers to the
+default seeding file (see previous answer).  A possible reason
+is that no default filename is known because neither RANDFILE
+nor HOME is set.  (Versions up to 0.9.6 used file ".rnd" in the
+current directory in this case, but this has changed with 0.9.6a.)
+
+
+* How do I create certificates or certificate requests?
+
+Check out the CA.pl(1) manual page. This provides a simple wrapper round
+the 'req', 'verify', 'ca' and 'pkcs12' utilities. For finer control check
+out the manual pages for the individual utilities and the certificate
+extensions documentation (currently in doc/openssl.txt).
+
+
+* Why can't I create certificate requests?
+
+You typically get the error:
+
+	unable to find 'distinguished_name' in config
+	problems making Certificate Request
+
+This is because it can't find the configuration file. Check out the
+DIAGNOSTICS section of req(1) for more information.
+
+
+* Why does <SSL program> fail with a certificate verify error?
+
+This problem is usually indicated by log messages saying something like
+"unable to get local issuer certificate" or "self signed certificate".
+When a certificate is verified its root CA must be "trusted" by OpenSSL
+this typically means that the CA certificate must be placed in a directory
+or file and the relevant program configured to read it. The OpenSSL program
+'verify' behaves in a similar way and issues similar error messages: check
+the verify(1) program manual page for more information.
+
+
+* Why can I only use weak ciphers when I connect to a server using OpenSSL?
+
+This is almost certainly because you are using an old "export grade" browser
+which only supports weak encryption. Upgrade your browser to support 128 bit
+ciphers.
+
+
+* How can I create DSA certificates?
+
+Check the CA.pl(1) manual page for a DSA certificate example.
+
+
+* Why can't I make an SSL connection to a server using a DSA certificate?
+
+Typically you'll see a message saying there are no shared ciphers when
+the same setup works fine with an RSA certificate. There are two possible
+causes. The client may not support connections to DSA servers most web
+browsers (including Netscape and MSIE) only support connections to servers
+supporting RSA cipher suites. The other cause is that a set of DH parameters
+has not been supplied to the server. DH parameters can be created with the
+dhparam(1) command and loaded using the SSL_CTX_set_tmp_dh() for example:
+check the source to s_server in apps/s_server.c for an example.
+
+
+* How can I remove the passphrase on a private key?
+
+Firstly you should be really *really* sure you want to do this. Leaving
+a private key unencrypted is a major security risk. If you decide that
+you do have to do this check the EXAMPLES sections of the rsa(1) and
+dsa(1) manual pages.
+
+
+* Why can't I use OpenSSL certificates with SSL client authentication?
+
+What will typically happen is that when a server requests authentication
+it will either not include your certificate or tell you that you have
+no client certificates (Netscape) or present you with an empty list box
+(MSIE). The reason for this is that when a server requests a client
+certificate it includes a list of CAs names which it will accept. Browsers
+will only let you select certificates from the list on the grounds that
+there is little point presenting a certificate which the server will
+reject.
+
+The solution is to add the relevant CA certificate to your servers "trusted
+CA list". How you do this depends on the server sofware in uses. You can
+print out the servers list of acceptable CAs using the OpenSSL s_client tool:
+
+openssl s_client -connect www.some.host:443 -prexit
+
+If your server only requests certificates on certain URLs then you may need
+to manually issue an HTTP GET command to get the list when s_client connects:
+
+GET /some/page/needing/a/certificate.html
+
+If your CA does not appear in the list then this confirms the problem.
+
+
+* Why does my browser give a warning about a mismatched hostname?
+
+Browsers expect the server's hostname to match the value in the commonName
+(CN) field of the certificate. If it does not then you get a warning.
+
+
+[BUILD] =======================================================================
+
 * Why does the linker complain about undefined symbols?
 
 Maybe the compilation was interrupted, and make doesn't notice that
@@ -162,17 +342,99 @@ If none of these helps, you may want to try using the current snapshot.
 If the problem persists, please submit a bug report.
 
 
-* Where can I get a compiled version of OpenSSL?
+* Why does the OpenSSL test fail with "bc: command not found"?
 
-Some applications that use OpenSSL are distributed in binary form.
-When using such an application, you don't need to install OpenSSL
-yourself; the application will include the required parts (e.g. DLLs).
+You didn't install "bc", the Unix calculator.  If you want to run the
+tests, get GNU bc from ftp://ftp.gnu.org or from your OS distributor.
 
-If you want to install OpenSSL on a Windows system and you don't have
-a C compiler, read the "Mingw32" section of INSTALL.W32 for information
-on how to obtain and install the free GNU C compiler.
 
-A number of Linux and *BSD distributions include OpenSSL.
+* Why does the OpenSSL test fail with "bc: 1 no implemented"?
+
+On some SCO installations or versions, bc has a bug that gets triggered
+when you run the test suite (using "make test").  The message returned is
+"bc: 1 not implemented".
+
+The best way to deal with this is to find another implementation of bc
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+for download instructions) can be safely used, for example.
+
+
+* Why does the OpenSSL compilation fail on Alpha True64 Unix?
+
+On some Alpha installations running True64 Unix and Compaq C, the compilation
+of crypto/sha/sha_dgst.c fails with the message 'Fatal:  Insufficient virtual
+memory to continue compilation.'  As far as the tests have shown, this may be
+a compiler bug.  What happens is that it eats up a lot of resident memory
+to build something, probably a table.  The problem is clearly in the
+optimization code, because if one eliminates optimization completely (-O0),
+the compilation goes through (and the compiler consumes about 2MB of resident
+memory instead of 240MB or whatever one's limit is currently).
+
+There are three options to solve this problem:
+
+1. set your current data segment size soft limit higher.  Experience shows
+that about 241000 kbytes seems to be enough on an AlphaServer DS10.  You do
+this with the command 'ulimit -Sd nnnnnn', where 'nnnnnn' is the number of
+kbytes to set the limit to.
+
+2. If you have a hard limit that is lower than what you need and you can't
+get it changed, you can compile all of OpenSSL with -O0 as optimization
+level.  This is however not a very nice thing to do for those who expect to
+get the best result from OpenSSL.  A bit more complicated solution is the
+following:
+
+----- snip:start -----
+  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
+       sed -e 's/ -O[0-9] / -O0 /'`"
+  rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
+  make
+----- snip:end -----
+
+This will only compile sha_dgst.c with -O0, the rest with the optimization
+level chosen by the configuration process.  When the above is done, do the
+test and installation and you're set.
+
+
+* Why does the OpenSSL compilation fail with "ar: command not found"?
+
+Getting this message is quite usual on Solaris 2, because Sun has hidden
+away 'ar' and other development commands in directories that aren't in
+$PATH by default.  One of those directories is '/usr/ccs/bin'.  The
+quickest way to fix this is to do the following (it assumes you use sh
+or any sh-compatible shell):
+
+----- snip:start -----
+  PATH=${PATH}:/usr/ccs/bin; export PATH
+----- snip:end -----
+
+and then redo the compilation.  What you should really do is make sure
+'/usr/ccs/bin' is permanently in your $PATH, for example through your
+'.profile' (again, assuming you use a sh-compatible shell).
+
+
+* Why does the OpenSSL compilation fail on Win32 with VC++?
+
+Sometimes, you may get reports from VC++ command line (cl) that it
+can't find standard include files like stdio.h and other weirdnesses.
+One possible cause is that the environment isn't correctly set up.
+To solve that problem, one should run VCVARS32.BAT which is found in
+the 'bin' subdirectory of the VC++ installation directory (somewhere
+under 'Program Files').  This needs to be done prior to running NMAKE,
+and the changes are only valid for the current DOS session.
+
+
+[PROG] ========================================================================
+
+* Is OpenSSL thread-safe?
+
+Yes (with limitations: an SSL connection may not concurrently be used
+by multiple threads).  On Windows and many Unix systems, OpenSSL
+automatically uses the multi-threaded versions of the standard
+libraries.  If your platform is not one of these, consult the INSTALL
+file.
+
+Multi-threaded applications must provide two callback functions to
+OpenSSL.  This is described in the threads(3) manpage.
 
 
 * I've compiled a program under Windows and it crashes: why?
@@ -259,68 +521,6 @@ is forgetting to load OpenSSL's table of algorithms with
 OpenSSL_add_all_algorithms(). See the manual page for more information.
 
 
-* How do I create certificates or certificate requests?
-
-Check out the CA.pl(1) manual page. This provides a simple wrapper round
-the 'req', 'verify', 'ca' and 'pkcs12' utilities. For finer control check
-out the manual pages for the individual utilities and the certificate
-extensions documentation (currently in doc/openssl.txt).
-
-
-* Why can't I create certificate requests?
-
-You typically get the error:
-
-	unable to find 'distinguished_name' in config
-	problems making Certificate Request
-
-This is because it can't find the configuration file. Check out the
-DIAGNOSTICS section of req(1) for more information.
-
-
-* Why does <SSL program> fail with a certificate verify error?
-
-This problem is usually indicated by log messages saying something like
-"unable to get local issuer certificate" or "self signed certificate".
-When a certificate is verified its root CA must be "trusted" by OpenSSL
-this typically means that the CA certificate must be placed in a directory
-or file and the relevant program configured to read it. The OpenSSL program
-'verify' behaves in a similar way and issues similar error messages: check
-the verify(1) program manual page for more information.
-
-
-* Why can I only use weak ciphers when I connect to a server using OpenSSL?
-
-This is almost certainly because you are using an old "export grade" browser
-which only supports weak encryption. Upgrade your browser to support 128 bit
-ciphers.
-
-
-* How can I create DSA certificates?
-
-Check the CA.pl(1) manual page for a DSA certificate example.
-
-
-* Why can't I make an SSL connection to a server using a DSA certificate?
-
-Typically you'll see a message saying there are no shared ciphers when
-the same setup works fine with an RSA certificate. There are two possible
-causes. The client may not support connections to DSA servers most web
-browsers (including Netscape and MSIE) only support connections to servers
-supporting RSA cipher suites. The other cause is that a set of DH parameters
-has not been supplied to the server. DH parameters can be created with the
-dhparam(1) command and loaded using the SSL_CTX_set_tmp_dh() for example:
-check the source to s_server in apps/s_server.c for an example.
-
-
-* How can I remove the passphrase on a private key?
-
-Firstly you should be really *really* sure you want to do this. Leaving
-a private key unencrypted is a major security risk. If you decide that
-you do have to do this check the EXAMPLES sections of the rsa(1) and
-dsa(1) manual pages.
-
-
 * Why can't the OpenSSH configure script detect OpenSSL?
 
 There is a problem with OpenSSH 1.2.2p1, in that the configure script
@@ -362,71 +562,26 @@ applied to the OpenSSH distribution:
 ----- snip:end -----
 
 
-* Why does the OpenSSL test fail with "bc: command not found"?
+* Can I use OpenSSL's SSL library with non-blocking I/O?
 
-You didn't install "bc", the Unix calculator.  If you want to run the
-tests, get GNU bc from ftp://ftp.gnu.org or from your OS distributor.
+Yes; make sure to read the SSL_get_error(3) manual page!
+
+A pitfall to avoid: Don't assume that SSL_read() will just read from
+the underlying transport or that SSL_write() will just write to it --
+it is also possible that SSL_write() cannot do any useful work until
+there is data to read, or that SSL_read() cannot do anything until it
+is possible to send data.  One reason for this is that the peer may
+request a new TLS/SSL handshake at any time during the protocol,
+requiring a bi-directional message exchange; both SSL_read() and
+SSL_write() will try to continue any pending handshake.
 
 
-* Why does the OpenSSL test fail with "bc: 1 no implemented"?
+* Why doesn't my server application receive a client certificate?
 
-On some SCO installations or versions, bc has a bug that gets triggered when
-you run the test suite (using "make test").  The message returned is "bc:
-1 not implemented".  The best way to deal with this is to find another
-implementation of bc and compile/install it.  For example, GNU bc (see
-http://www.gnu.org/software/software.html for download instructions) can
-be safely used.
+Due to the TLS protocol definition, a client will only send a certificate,
+if explicitely asked by the server. Use the SSL_VERIFY_PEER flag of the
+SSL_CTX_set_verify() function to enable the use of client certificates.
 
 
-* Why does the OpenSSL compilation fail on Alpha True64 Unix?
-
-On some Alpha installations running True64 Unix and Compaq C, the compilation
-of crypto/sha/sha_dgst.c fails with the message 'Fatal:  Insufficient virtual
-memory to continue compilation.'  As far as the tests have shown, this may be
-a compiler bug.  What happens is that it eats up a lot of resident memory
-to build something, probably a table.  The problem is clearly in the
-optimization code, because if one eliminates optimization completely (-O0),
-the compilation goes through (and the compiler consumes about 2MB of resident
-memory instead of 240MB or whatever one's limit is currently).
-
-There are three options to solve this problem:
-
-1. set your current data segment size soft limit higher.  Experience shows
-that about 241000 kbytes seems to be enough on an AlphaServer DS10.  You do
-this with the command 'ulimit -Sd nnnnnn', where 'nnnnnn' is the number of
-kbytes to set the limit to.
-
-2. If you have a hard limit that is lower than what you need and you can't
-get it changed, you can compile all of OpenSSL with -O0 as optimization
-level.  This is however not a very nice thing to do for those who expect to
-get the best result from OpenSSL.  A bit more complicated solution is the
-following:
-
------ snip:start -----
-  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
-       sed -e 's/ -O[0-9] / -O0 /'`"
-  rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
-  make
------ snip:end -----
-
-This will only compile sha_dgst.c with -O0, the rest with the optimization
-level chosen by the configuration process.  When the above is done, do the
-test and installation and you're set.
-
-
-* Why does the OpenSSL compilation fail with "ar: command not found"?
-
-Getting this message is quite usual on Solaris 2, because Sun has hidden
-away 'ar' and other development commands in directories that aren't in
-$PATH by default.  One of those directories is '/usr/ccs/bin'.  The
-quickest way to fix this is to do the following (it assumes you use sh
-or any sh-compatible shell):
-
------ snip:start -----
-  PATH=${PATH}:/usr/ccs/bin; export PATH
------ snip:end -----
-
-and then redo the compilation.  What you should really do is make sure
-'/usr/ccs/bin' is permanently in your $PATH, for example through your
-'.profile' (again, assuming you use a sh-compatible shell).
+===============================================================================
 

INSTALL

@@ -7,8 +7,11 @@
 
  To install OpenSSL, you will need:
 
+  * make
   * Perl 5
   * an ANSI C compiler
+  * a development environment in form of development libraries and C
+    header files
   * a supported Unix operating system
 
  Quick Start
@@ -43,9 +46,6 @@
   --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
                 the library files and binaries are also installed there.
 
-  rsaref        Build with RSADSI's RSAREF toolkit (this assumes that
-                librsaref.a is in the library search path).
-
   no-threads    Don't try to build with support for multi-threaded
                 applications.
 
@@ -57,10 +57,7 @@
 
   shared        In addition to the usual static libraries, create shared
                 libraries on platforms where it's supported.  See "Note on
-                shared libraries" below.  THIS IS NOT RECOMMENDED!  Since
-                this is a development branch, the positions of the ENGINE
-                symbols in the transfer vector are constantly moving, so
-                binary backward compatibility can't be guaranteed in any way.
+                shared libraries" below.
 
   no-asm        Do not use assembler code.
 
@@ -128,7 +125,7 @@
      directory, and the binary will be in the "apps" directory.
 
      If "make" fails, look at the output.  There may be reasons for
-     the failure that isn't a problem in OpenSSL itself (like missing
+     the failure that aren't problems in OpenSSL itself (like missing
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be forwarded to a public mailing list).  Include the

INSTALL.VMS

@@ -8,6 +8,7 @@ Intro:
 
 This file is divided in the following parts:
 
+  Requirements			- Mandatory reading.
   Checking the distribution	- Mandatory reading.
   Compilation			- Mandatory reading.
   Logical names			- Mandatory reading.
@@ -19,6 +20,15 @@ This file is divided in the following parts:
   TODO				- Things that are to come.
 
 
+Requirements:
+=============
+
+To build and install OpenSSL, you will need:
+
+ * DEC C or some other ANSI C compiler.  VAX C is *not* supported.
+   [Note: OpenSSL has only been tested with DEC C.  Compiling with 
+    a different ANSI C compiler may require some work]
+
 Checking the distribution:
 ==========================
 

Makefile.org

@@ -9,6 +9,7 @@ SHLIB_VERSION_NUMBER=
 SHLIB_VERSION_HISTORY=
 SHLIB_MAJOR=
 SHLIB_MINOR=
+SHLIB_EXT=
 PLATFORM=dist
 OPTIONS=
 CONFIGURE_ARGS=
@@ -56,8 +57,9 @@ CC= gcc
 #CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
 CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
 DEPFLAG= 
-PEX_LIBS= -L. -L.. -L../.. -L../../..
+PEX_LIBS= 
 EX_LIBS= 
+EXE_EXT= 
 AR=ar r
 RANLIB= ranlib
 PERL= perl
@@ -149,21 +151,18 @@ RMD160_ASM_OBJ= asm/rm86-out.o
 #RMD160_ASM_OBJ= asm/rm86-out.o       # a.out, FreeBSD
 #RMD160_ASM_OBJ= asm/rm86bsdi.o       # bsdi
 
-# To do special treatment, use "directory names" starting with a period.
 # When we're prepared to use shared libraries in the programs we link here
-# we might have SHLIB_MARK1 get the value ".shlib." and SHLIB_MARK2 be empty,
-# or have that configurable.
-SHLIB_MARK1=.shlib-clean.
-SHLIB_MARK2=.shlib.
+# we might set SHLIB_MARK to '$(SHARED_LIBS)'.
+SHLIB_MARK=
 
-DIRS=   crypto ssl rsaref $(SHLIB_MARK1) apps test tools $(SHLIB_MARK2)
+DIRS=   crypto ssl rsaref $(SHLIB_MARK) apps test tools
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
 	md2 md4 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn rsa dsa dh dso engine \
+	bn rsa dsa dh dso \
 	buffer bio stack lhash rand err objects \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp
 
@@ -180,7 +179,10 @@ ONEDIRS=out tmp
 EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
 WDIRS=  windows
 LIBS=   libcrypto.a libssl.a
-SHARED_LIBS=libcrypto.so libssl.so
+SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
+SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_LIBS=
+SHARED_LIBS_LINK_EXTS=
 
 GENERAL=        Makefile
 BASENAME=       openssl
@@ -190,108 +192,93 @@ WTARFILE=       $(NAME)-win.tar
 EXHEADER=       e_os.h e_os2.h
 HEADER=         e_os.h
 
-all: Makefile.ssl
-	@need_shlib=true; \
-	for i in $(DIRS) ;\
-	do \
-	if [ "$$i" = ".shlib-clean." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) clean-shared; \
-		fi; \
-	elif [ "$$i" = ".shlib." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) $(SHARED_LIBS); \
-		fi; \
-		need_shlib=false; \
-	else \
-		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' SDIRS='${SDIRS}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
-	fi; \
-	done; \
-	if $$need_shlib && [ "$(SHLIB_MARK1)" != "" -o "$(SHLIB_MARK1)" != "" ]; then \
-		$(MAKE) $(SHARED_LIBS); \
-	fi
+# When we're prepared to use shared libraries in the programs we link here
+# we might remove 'clean-shared' from the targets to perform at this stage
+
+all: clean-shared Makefile.ssl sub_all
 
 sub_all:
-	@need_shlib=true; \
-	for i in $(DIRS) ;\
+	@for i in $(DIRS); \
 	do \
-	if [ "$$i" = ".shlib-clean." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) clean-shared; \
-		fi; \
-	elif [ "$$i" = ".shlib." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) $(SHARED_LIBS); \
-		fi; \
-		need_shlib=false; \
-	else \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' all ) || exit 1; \
+	else \
+		$(MAKE) $$i; \
 	fi; \
 	done; \
-	if $$need_shlib && [ "$(SHLIB_MARK1)" != "" -o "$(SHLIB_MARK1)" != "" ]; then \
+	if echo "$(DIRS)" | \
+	    egrep '(^| )(crypto|ssl)( |$$)' > /dev/null 2>&1 && \
+	   [ -n "$(SHARED_LIBS)" ]; then \
 		$(MAKE) $(SHARED_LIBS); \
 	fi
 
-libcrypto.so: libcrypto.a
+libcrypto$(SHLIB_EXT): libcrypto.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=crypto $(SHLIB_TARGET); \
+		$(MAKE) SHLIBDIRS=crypto build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 	fi
-libssl.so: libcrypto.so libssl.a
+libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-L. -lcrypto' $(SHLIB_TARGET); \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 	fi
 
 clean-shared:
-	for i in ${SHLIBDIRS}; do \
-	rm -f lib$$i.so \
-		lib$$i.so.${SHLIB_MAJOR} \
-		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+	@for i in $(SHLIBDIRS); do \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; rm -f lib$$i$$j ); \
+			done; \
+		fi; \
+		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
 	done
 
-linux-shared:
-	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	rm -f lib$$i.so \
-		lib$$i.so.${SHLIB_MAJOR} \
-		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+link-shared:
+	@for i in $(SHLIBDIRS); do \
+		prev=lib$$i$(SHLIB_EXT); \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; ln -f -s $$prev lib$$i$$j ); \
+				prev=lib$$i$$j; \
+			done; \
+		fi; \
+	done
+
+build-shared: clean-shared do_$(SHLIB_TARGET) link-shared
+
+do_bsd-gcc-shared: do_gnu-shared
+do_linux-shared: do_gnu-shared
+do_gnu-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 	( set -x; ${CC}  -shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		-Wl,-S,-soname=lib$$i.so.${SHLIB_MAJOR} \
+		-Wl,-S,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -L. -l$$i"; \
-	( set -x; \
-		ln -s lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			lib$$i.so.${SHLIB_MAJOR}; \
-		ln -s lib$$i.so.${SHLIB_MAJOR} lib$$i.so ); \
+	libs="$$libs -l$$i"; \
 	done
 
 # This assumes that GNU utilities are *not* used
-true64-shared:
-	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+do_tru64-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 	( set -x; ${CC}  -shared -no_archive -o lib$$i.so \
 		-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 		-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -L. -l$$i"; \
+	libs="$$libs -l$$i"; \
 	done
 
 # This assumes that GNU utilities are *not* used
-solaris-shared:
-	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	rm -f lib$$i.so \
-		lib$$i.so.${SHLIB_MAJOR} \
-		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
-	( set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		-h lib$$i.so.${SHLIB_MAJOR} \
+do_solaris-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+	  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -L. -l$$i"; \
-	ln -s lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		lib$$i.so.${SHLIB_MAJOR}; \
-	ln -s lib$$i.so.${SHLIB_MAJOR} lib$$i.so; \
+	libs="$$libs -l$$i"; \
 	done
 
 Makefile.ssl: Makefile.org
@@ -306,7 +293,7 @@ clean:
 	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making clean in $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
 		rm -f $(LIBS); \
@@ -327,7 +314,7 @@ files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making 'files' in $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \
 	fi; \
@@ -338,7 +325,7 @@ links:
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
 	@for i in $(DIRS); do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making links in $$i..." && \
 		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' links ) || exit 1; \
 	fi; \
@@ -348,7 +335,7 @@ dclean:
 	rm -f *.bak
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dclean in $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \
 	fi; \
@@ -363,7 +350,7 @@ test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' tests );
+	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' EXE_EXT='${EXE_EXT}' tests );
 	@apps/openssl version -a
 
 report:
@@ -372,7 +359,7 @@ report:
 depend:
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dependencies $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' depend ) || exit 1; \
 	fi; \
@@ -381,7 +368,7 @@ depend:
 lint:
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making lint $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \
 	fi; \
@@ -390,7 +377,7 @@ lint:
 tags:
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making tags $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
 	fi; \
@@ -452,9 +439,9 @@ install: all install_docs
 	done;
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i; echo "installing $$i..."; \
-		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' install ); \
+		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' install ); \
 	fi; \
 	done
 	@for i in $(LIBS) ;\
@@ -462,11 +449,24 @@ install: all install_docs
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
 			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			(echo $$i | grep '\\.a$$' > /dev/null 2>&1) \
-			&& $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi \
 	done
+	@if [ -n "$(SHARED_LIBS)" ]; then \
+		tmp="$(SHARED_LIBS)"; \
+		for i in $${tmp:-x}; \
+		do \
+			if [ -f "$$i" ]; then \
+			(       echo installing $$i; \
+				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+				chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			fi \
+		done; \
+		(	here="`pwd`"; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			make -f $$here/Makefile link-shared ); \
+	fi
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -474,30 +474,23 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@echo installing man 1 and man 5
 	@for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`[ "$$fn" = "config" ] && echo 5 || echo 1`; \
+		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
 		(cd `dirname $$i`; \
 		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
 			 --release=$(VERSION) `basename $$i`) \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
 	done
-	@echo installing man 3 and man 7
 	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`[ "$$fn" = "des_modes" ] && echo 7 || echo 3`; \
+		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
 		(cd `dirname $$i`; \
 		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`) \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
 	done
 
-shlib: all
-	if [ ! -d shlib_dir ] ; then mkdir shlib_dir ; else rm -f shlib_dir/* ; fi
-	cd shlib_dir ; ar -x ../libcrypto.a && $(CC) -shared ./*.o -Wl,-soname -Wl,libcrypto.so.0.9 \
-            -o ./libcrypto.so.0.9.4 && rm *.o
-	cd shlib_dir ; ar -x ../libssl.a && $(CC) -shared ./*.o -Wl,-soname -Wl,libssl.so.0.9 \
-            -o ./libssl.so.0.9.4 && rm *.o
-
 # DO NOT DELETE THIS LINE -- make depend depends on it.

NEWS

@@ -5,6 +5,48 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
+
+      o Security fix: PRNG improvements.
+      o Security fix: RSA OAEP check.
+      o Security fix: Reinsert and fix countermeasure to Bleichbacher's
+        attack.
+      o MIPS bug fix in BIGNUM.
+      o Bug fix in "openssl enc".
+      o Bug fix in X.509 printing routine.
+      o Bug fix in DSA verification routine and DSA S/MIME verification.
+      o Bug fix to make PRNG thread-safe.
+      o Bug fix in RAND_file_name().
+      o Bug fix in compatibility mode trust settings.
+      o Bug fix in blowfish EVP.
+      o Increase default size for BIO buffering filter.
+      o Compatibility fixes in some scripts.
+
+  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.6a:
+
+      o Security fix: change behavior of OpenSSL to avoid using
+        environment variables when running as root.
+      o Security fix: check the result of RSA-CRT to reduce the
+        possibility of deducing the private key from an incorrectly
+        calculated signature.
+      o Security fix: prevent Bleichenbacher's DSA attack.
+      o Security fix: Zero the premaster secret after deriving the
+        master secret in DH ciphersuites.
+      o Reimplement SSL_peek(), which had various problems.
+      o Compatibility fix: the function des_encrypt() renamed to
+        des_encrypt1() to avoid clashes with some Unixen libc.
+      o Bug fixes for Win32, HP/UX and Irix.
+      o Bug fixes in BIGNUM, SSL, PKCS#7, PKCS#12, X.509, CONF and
+        memory checking routines.
+      o Bug fixes for RSA operations in threaded enviroments.
+      o Bug fixes in misc. openssl applications.
+      o Remove a few potential memory leaks.
+      o Add tighter checks of BIGNUM routines.
+      o Shared library support has been reworked for generality.
+      o More documentation.
+      o New function BN_rand_range().
+      o Add "-rand" option to openssl s_client and s_server.
+
   Major changes between OpenSSL 0.9.5a and OpenSSL 0.9.6:
 
       o Some documentation for BIO and SSL libraries.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.6a-beta1 [engine] 13 Mar 2001
+ OpenSSL 0.9.6b  9 Jul 2001
 
- Copyright (c) 1998-2000 The OpenSSL Project
+ Copyright (c) 1998-2001 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 

STATUS

@@ -1,11 +1,10 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2001/03/13 16:39:20 $
+  ______________                           $Date: 2001/04/05 17:42:00 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.6a: In development...
-                       Beta 1 released on March 13th, 2001
+    o  OpenSSL 0.9.6a: Released on April      5th, 2001
     o  OpenSSL 0.9.6:  Released on September 24th, 2000
     o  OpenSSL 0.9.5a: Released on April      1st, 2000
     o  OpenSSL 0.9.5:  Released on February  28th, 2000
@@ -19,14 +18,13 @@
 
   AVAILABLE PATCHES
 
-    o CA.pl patch (Damien Miller)
-
   IN PROGRESS
 
     o Steve is currently working on (in no particular order):
         ASN1 code redesign, butchery, replacement.
+        OCSP
         EVP cipher enhancement.
-        Proper (or at least usable) certificate chain verification.
+        Enhanced certificate chain verification.
 	Private key, certificate and CRL API and implementation.
 	Developing and bugfixing PKCS#7 (S/MIME code).
         Various X509 issues: character sets, certificate request extensions.
@@ -35,19 +33,29 @@
     o Richard is currently working on:
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
-	Dynamic thread-lock support.
 	Shared library support for VMS.
+	OCSP
+	Kerberos 5 authentication
+	Constification
 
   NEEDS PATCH
 
-    o  non-blocking socket on AIX
-    o  $(PERL) in */Makefile.ssl
-    o  "Sign the certificate?" - "n" creates empty certificate file
+    o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
+
+    o  OpenSSL_0_9_6-stable:
+       #include <openssl/e_os.h> in exported header files is illegal since
+       e_os.h is suitable only for library-internal use.
+
+    o  Whenever strncpy is used, make sure the resulting string is NULL-terminated
+       or an error is reported
 
   OPEN ISSUES
 
-    o internal_verify doesn't know about X509.v3 (basicConstraints
-      CA flag ...)
+    o  crypto/ex_data.c is not really thread-safe and so must be used
+       with care (e.g., extra locking where necessary, or don't call
+       CRYPTO_get_ex_new_index once multiple threads exist).
+       The current API is not suitable for everything that it pretends
+       to offer.
 
     o  The Makefile hierarchy and build mechanism is still not a round thing:
 

apps/Makefile.ssl

@@ -18,6 +18,7 @@ RM=		rm -f
 
 PEX_LIBS=
 EX_LIBS= 
+EXE_EXT= 
 
 CFLAGS= -DMONOLITH $(INCLUDES) $(CFLAG)
 
@@ -32,7 +33,7 @@ PROGRAM= openssl
 
 SCRIPTS=CA.sh CA.pl der_chop
 
-EXE= $(PROGRAM)
+EXE= $(PROGRAM)$(EXE_EXT)
 
 E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
 	ca crl rsa rsautl dsa dsaparam \
@@ -77,7 +78,7 @@ top:
 
 all:	exe
 
-exe:	$(EXE)
+exe:	$(PROGRAM)
 
 req: sreq.o $(A_OBJ) $(DLIBCRYPTO)
 	$(CC) -o req $(CFLAG) sreq.o $(A_OBJ) $(RAND_OBJ) $(PEX_LIBS) $(LIBCRYPTO) $(EX_LIBS)
@@ -209,15 +210,14 @@ ca.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 ca.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 ca.o: ../include/openssl/des.h ../include/openssl/dh.h ../include/openssl/dsa.h
 ca.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
-ca.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
-ca.o: ../include/openssl/err.h ../include/openssl/evp.h
-ca.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-ca.o: ../include/openssl/md2.h ../include/openssl/md4.h
-ca.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-ca.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-ca.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ca.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ca.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+ca.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+ca.o: ../include/openssl/evp.h ../include/openssl/idea.h
+ca.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+ca.o: ../include/openssl/md4.h ../include/openssl/md5.h
+ca.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+ca.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+ca.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+ca.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 ca.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 ca.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 ca.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -296,15 +296,14 @@ dgst.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dgst.o: ../include/openssl/des.h ../include/openssl/dh.h
 dgst.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 dgst.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dgst.o: ../include/openssl/engine.h ../include/openssl/err.h
-dgst.o: ../include/openssl/evp.h ../include/openssl/idea.h
-dgst.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-dgst.o: ../include/openssl/md4.h ../include/openssl/md5.h
-dgst.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-dgst.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dgst.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dgst.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dgst.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+dgst.o: ../include/openssl/err.h ../include/openssl/evp.h
+dgst.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+dgst.o: ../include/openssl/md2.h ../include/openssl/md4.h
+dgst.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+dgst.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dgst.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dgst.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dgst.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 dgst.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 dgst.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 dgst.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -316,15 +315,14 @@ dh.o: ../include/openssl/buffer.h ../include/openssl/cast.h
 dh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dh.o: ../include/openssl/des.h ../include/openssl/dh.h ../include/openssl/dsa.h
 dh.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
-dh.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
-dh.o: ../include/openssl/err.h ../include/openssl/evp.h
-dh.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-dh.o: ../include/openssl/md2.h ../include/openssl/md4.h
-dh.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-dh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-dh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-dh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-dh.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+dh.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+dh.o: ../include/openssl/evp.h ../include/openssl/idea.h
+dh.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+dh.o: ../include/openssl/md4.h ../include/openssl/md5.h
+dh.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+dh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+dh.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+dh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 dh.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 dh.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 dh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -338,15 +336,14 @@ dsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 dsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 dsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-dsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-dsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-dsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-dsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-dsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+dsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+dsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+dsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+dsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+dsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dsa.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 dsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 dsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 dsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -359,15 +356,14 @@ dsaparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dsaparam.o: ../include/openssl/des.h ../include/openssl/dh.h
 dsaparam.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 dsaparam.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-dsaparam.o: ../include/openssl/engine.h ../include/openssl/err.h
-dsaparam.o: ../include/openssl/evp.h ../include/openssl/idea.h
-dsaparam.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-dsaparam.o: ../include/openssl/md4.h ../include/openssl/md5.h
-dsaparam.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-dsaparam.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dsaparam.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-dsaparam.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-dsaparam.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+dsaparam.o: ../include/openssl/err.h ../include/openssl/evp.h
+dsaparam.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+dsaparam.o: ../include/openssl/md2.h ../include/openssl/md4.h
+dsaparam.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+dsaparam.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dsaparam.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dsaparam.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dsaparam.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 dsaparam.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 dsaparam.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 dsaparam.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -380,20 +376,20 @@ enc.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 enc.o: ../include/openssl/des.h ../include/openssl/dh.h
 enc.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 enc.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-enc.o: ../include/openssl/engine.h ../include/openssl/err.h
-enc.o: ../include/openssl/evp.h ../include/openssl/idea.h
-enc.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-enc.o: ../include/openssl/md4.h ../include/openssl/md5.h
-enc.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-enc.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-enc.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-enc.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-enc.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-enc.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-enc.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-enc.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-enc.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-enc.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+enc.o: ../include/openssl/err.h ../include/openssl/evp.h
+enc.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+enc.o: ../include/openssl/md2.h ../include/openssl/md4.h
+enc.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+enc.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+enc.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+enc.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+enc.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+enc.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+enc.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+enc.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+enc.o: ../include/openssl/sha.h ../include/openssl/stack.h
+enc.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+enc.o: ../include/openssl/x509_vfy.h apps.h
 errstr.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 errstr.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 errstr.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -424,20 +420,20 @@ gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 gendh.o: ../include/openssl/des.h ../include/openssl/dh.h
 gendh.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 gendh.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-gendh.o: ../include/openssl/engine.h ../include/openssl/err.h
-gendh.o: ../include/openssl/evp.h ../include/openssl/idea.h
-gendh.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-gendh.o: ../include/openssl/md4.h ../include/openssl/md5.h
-gendh.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-gendh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-gendh.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-gendh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-gendh.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-gendh.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-gendh.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-gendh.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-gendh.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-gendh.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+gendh.o: ../include/openssl/err.h ../include/openssl/evp.h
+gendh.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+gendh.o: ../include/openssl/md2.h ../include/openssl/md4.h
+gendh.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+gendh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+gendh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+gendh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+gendh.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+gendh.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+gendh.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+gendh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+gendh.o: ../include/openssl/sha.h ../include/openssl/stack.h
+gendh.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+gendh.o: ../include/openssl/x509_vfy.h apps.h
 gendsa.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 gendsa.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 gendsa.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -445,15 +441,14 @@ gendsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 gendsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 gendsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 gendsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-gendsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-gendsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-gendsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-gendsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-gendsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-gendsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-gendsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-gendsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-gendsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+gendsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+gendsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+gendsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+gendsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+gendsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+gendsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+gendsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+gendsa.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 gendsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 gendsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 gendsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -466,15 +461,14 @@ genrsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 genrsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 genrsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 genrsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-genrsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-genrsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-genrsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-genrsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-genrsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-genrsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-genrsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-genrsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-genrsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+genrsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+genrsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+genrsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+genrsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+genrsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+genrsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+genrsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+genrsa.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 genrsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 genrsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 genrsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -551,15 +545,14 @@ pkcs12.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 pkcs12.o: ../include/openssl/des.h ../include/openssl/dh.h
 pkcs12.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 pkcs12.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-pkcs12.o: ../include/openssl/engine.h ../include/openssl/err.h
-pkcs12.o: ../include/openssl/evp.h ../include/openssl/idea.h
-pkcs12.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-pkcs12.o: ../include/openssl/md4.h ../include/openssl/md5.h
-pkcs12.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-pkcs12.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs12.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs12.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs12.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+pkcs12.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs12.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+pkcs12.o: ../include/openssl/md2.h ../include/openssl/md4.h
+pkcs12.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+pkcs12.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs12.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs12.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+pkcs12.o: ../include/openssl/pkcs12.h ../include/openssl/pkcs7.h
 pkcs12.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 pkcs12.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 pkcs12.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -573,15 +566,14 @@ pkcs7.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 pkcs7.o: ../include/openssl/des.h ../include/openssl/dh.h
 pkcs7.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 pkcs7.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-pkcs7.o: ../include/openssl/engine.h ../include/openssl/err.h
-pkcs7.o: ../include/openssl/evp.h ../include/openssl/idea.h
-pkcs7.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-pkcs7.o: ../include/openssl/md4.h ../include/openssl/md5.h
-pkcs7.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-pkcs7.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs7.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-pkcs7.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+pkcs7.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs7.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+pkcs7.o: ../include/openssl/md2.h ../include/openssl/md4.h
+pkcs7.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+pkcs7.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs7.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+pkcs7.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 pkcs7.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 pkcs7.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 pkcs7.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -594,15 +586,14 @@ pkcs8.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 pkcs8.o: ../include/openssl/des.h ../include/openssl/dh.h
 pkcs8.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 pkcs8.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-pkcs8.o: ../include/openssl/engine.h ../include/openssl/err.h
-pkcs8.o: ../include/openssl/evp.h ../include/openssl/idea.h
-pkcs8.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-pkcs8.o: ../include/openssl/md4.h ../include/openssl/md5.h
-pkcs8.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-pkcs8.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-pkcs8.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-pkcs8.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
-pkcs8.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+pkcs8.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs8.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+pkcs8.o: ../include/openssl/md2.h ../include/openssl/md4.h
+pkcs8.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+pkcs8.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs8.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs8.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+pkcs8.o: ../include/openssl/pkcs12.h ../include/openssl/pkcs7.h
 pkcs8.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
 pkcs8.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
 pkcs8.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
@@ -616,19 +607,19 @@ rand.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 rand.o: ../include/openssl/des.h ../include/openssl/dh.h
 rand.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 rand.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-rand.o: ../include/openssl/engine.h ../include/openssl/err.h
-rand.o: ../include/openssl/evp.h ../include/openssl/idea.h
-rand.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-rand.o: ../include/openssl/md4.h ../include/openssl/md5.h
-rand.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-rand.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rand.o: ../include/openssl/opensslv.h ../include/openssl/pkcs7.h
-rand.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-rand.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
-rand.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-rand.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-rand.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-rand.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+rand.o: ../include/openssl/err.h ../include/openssl/evp.h
+rand.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+rand.o: ../include/openssl/md2.h ../include/openssl/md4.h
+rand.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+rand.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rand.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rand.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+rand.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+rand.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+rand.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+rand.o: ../include/openssl/sha.h ../include/openssl/stack.h
+rand.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
+rand.o: ../include/openssl/x509_vfy.h apps.h
 req.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 req.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 req.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -636,15 +627,14 @@ req.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 req.o: ../include/openssl/des.h ../include/openssl/dh.h
 req.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 req.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-req.o: ../include/openssl/engine.h ../include/openssl/err.h
-req.o: ../include/openssl/evp.h ../include/openssl/idea.h
-req.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-req.o: ../include/openssl/md4.h ../include/openssl/md5.h
-req.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-req.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-req.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-req.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-req.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+req.o: ../include/openssl/err.h ../include/openssl/evp.h
+req.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+req.o: ../include/openssl/md2.h ../include/openssl/md4.h
+req.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+req.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+req.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+req.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+req.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 req.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 req.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 req.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -658,15 +648,14 @@ rsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 rsa.o: ../include/openssl/des.h ../include/openssl/dh.h
 rsa.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 rsa.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-rsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-rsa.o: ../include/openssl/evp.h ../include/openssl/idea.h
-rsa.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-rsa.o: ../include/openssl/md4.h ../include/openssl/md5.h
-rsa.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-rsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rsa.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-rsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-rsa.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+rsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+rsa.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+rsa.o: ../include/openssl/md2.h ../include/openssl/md4.h
+rsa.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+rsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+rsa.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 rsa.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 rsa.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 rsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -679,15 +668,14 @@ rsautl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 rsautl.o: ../include/openssl/des.h ../include/openssl/dh.h
 rsautl.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 rsautl.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-rsautl.o: ../include/openssl/engine.h ../include/openssl/err.h
-rsautl.o: ../include/openssl/evp.h ../include/openssl/idea.h
-rsautl.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-rsautl.o: ../include/openssl/md4.h ../include/openssl/md5.h
-rsautl.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-rsautl.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-rsautl.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-rsautl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-rsautl.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+rsautl.o: ../include/openssl/err.h ../include/openssl/evp.h
+rsautl.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+rsautl.o: ../include/openssl/md2.h ../include/openssl/md4.h
+rsautl.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+rsautl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rsautl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rsautl.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+rsautl.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 rsautl.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 rsautl.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 rsautl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -723,24 +711,23 @@ s_client.o: ../include/openssl/comp.h ../include/openssl/conf.h
 s_client.o: ../include/openssl/crypto.h ../include/openssl/des.h
 s_client.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 s_client.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
-s_client.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
-s_client.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_client.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_client.o: ../include/openssl/md2.h ../include/openssl/md4.h
-s_client.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-s_client.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_client.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_client.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_client.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-s_client.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-s_client.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-s_client.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-s_client.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_client.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_client.o: s_apps.h
+s_client.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+s_client.o: ../include/openssl/evp.h ../include/openssl/idea.h
+s_client.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+s_client.o: ../include/openssl/md4.h ../include/openssl/md5.h
+s_client.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+s_client.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+s_client.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+s_client.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_client.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+s_client.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+s_client.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+s_client.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_client.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_client.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_client.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_client.o: ../include/openssl/tls1.h ../include/openssl/x509.h
+s_client.o: ../include/openssl/x509_vfy.h apps.h s_apps.h
 s_server.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 s_server.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 s_server.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -748,24 +735,23 @@ s_server.o: ../include/openssl/comp.h ../include/openssl/conf.h
 s_server.o: ../include/openssl/crypto.h ../include/openssl/des.h
 s_server.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 s_server.o: ../include/openssl/e_os.h ../include/openssl/e_os.h
-s_server.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
-s_server.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_server.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-s_server.o: ../include/openssl/md2.h ../include/openssl/md4.h
-s_server.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-s_server.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_server.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-s_server.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_server.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-s_server.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-s_server.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-s_server.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-s_server.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_server.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_server.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_server.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_server.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
-s_server.o: s_apps.h
+s_server.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+s_server.o: ../include/openssl/evp.h ../include/openssl/idea.h
+s_server.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+s_server.o: ../include/openssl/md4.h ../include/openssl/md5.h
+s_server.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+s_server.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+s_server.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
+s_server.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_server.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+s_server.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+s_server.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_server.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_server.o: ../include/openssl/tls1.h ../include/openssl/x509.h
+s_server.o: ../include/openssl/x509_vfy.h apps.h s_apps.h
 s_socket.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 s_socket.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 s_socket.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -843,15 +829,14 @@ smime.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 smime.o: ../include/openssl/des.h ../include/openssl/dh.h
 smime.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 smime.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-smime.o: ../include/openssl/engine.h ../include/openssl/err.h
-smime.o: ../include/openssl/evp.h ../include/openssl/idea.h
-smime.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-smime.o: ../include/openssl/md4.h ../include/openssl/md5.h
-smime.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-smime.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-smime.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-smime.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-smime.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+smime.o: ../include/openssl/err.h ../include/openssl/evp.h
+smime.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+smime.o: ../include/openssl/md2.h ../include/openssl/md4.h
+smime.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+smime.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+smime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+smime.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+smime.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 smime.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 smime.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 smime.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -864,20 +849,20 @@ speed.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 speed.o: ../include/openssl/des.h ../include/openssl/dh.h
 speed.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 speed.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-speed.o: ../include/openssl/engine.h ../include/openssl/err.h
-speed.o: ../include/openssl/evp.h ../include/openssl/hmac.h
-speed.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-speed.o: ../include/openssl/md2.h ../include/openssl/md4.h
-speed.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-speed.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-speed.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-speed.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-speed.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
-speed.o: ../include/openssl/symhacks.h ../include/openssl/x509.h
-speed.o: ../include/openssl/x509_vfy.h ./testdsa.h ./testrsa.h apps.h
+speed.o: ../include/openssl/err.h ../include/openssl/evp.h
+speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
+speed.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+speed.o: ../include/openssl/md4.h ../include/openssl/md5.h
+speed.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+speed.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+speed.o: ../include/openssl/opensslv.h ../include/openssl/pkcs7.h
+speed.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+speed.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+speed.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+speed.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+speed.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h ./testdsa.h
+speed.o: ./testrsa.h apps.h
 spkac.o: ../include/openssl/asn1.h ../include/openssl/bio.h
 spkac.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 spkac.o: ../include/openssl/buffer.h ../include/openssl/cast.h
@@ -885,15 +870,14 @@ spkac.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 spkac.o: ../include/openssl/des.h ../include/openssl/dh.h
 spkac.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 spkac.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-spkac.o: ../include/openssl/engine.h ../include/openssl/err.h
-spkac.o: ../include/openssl/evp.h ../include/openssl/idea.h
-spkac.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-spkac.o: ../include/openssl/md4.h ../include/openssl/md5.h
-spkac.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-spkac.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-spkac.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-spkac.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-spkac.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+spkac.o: ../include/openssl/err.h ../include/openssl/evp.h
+spkac.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+spkac.o: ../include/openssl/md2.h ../include/openssl/md4.h
+spkac.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+spkac.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+spkac.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+spkac.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+spkac.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 spkac.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 spkac.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 spkac.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -906,15 +890,14 @@ verify.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 verify.o: ../include/openssl/des.h ../include/openssl/dh.h
 verify.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 verify.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-verify.o: ../include/openssl/engine.h ../include/openssl/err.h
-verify.o: ../include/openssl/evp.h ../include/openssl/idea.h
-verify.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-verify.o: ../include/openssl/md4.h ../include/openssl/md5.h
-verify.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-verify.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-verify.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-verify.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-verify.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+verify.o: ../include/openssl/err.h ../include/openssl/evp.h
+verify.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+verify.o: ../include/openssl/md2.h ../include/openssl/md4.h
+verify.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+verify.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+verify.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+verify.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+verify.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 verify.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 verify.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 verify.o: ../include/openssl/safestack.h ../include/openssl/sha.h
@@ -947,15 +930,14 @@ x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 x509.o: ../include/openssl/des.h ../include/openssl/dh.h
 x509.o: ../include/openssl/dsa.h ../include/openssl/e_os.h
 x509.o: ../include/openssl/e_os.h ../include/openssl/e_os2.h
-x509.o: ../include/openssl/engine.h ../include/openssl/err.h
-x509.o: ../include/openssl/evp.h ../include/openssl/idea.h
-x509.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-x509.o: ../include/openssl/md4.h ../include/openssl/md5.h
-x509.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-x509.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-x509.o: ../include/openssl/opensslv.h ../include/openssl/pem.h
-x509.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-x509.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+x509.o: ../include/openssl/err.h ../include/openssl/evp.h
+x509.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+x509.o: ../include/openssl/md2.h ../include/openssl/md4.h
+x509.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+x509.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+x509.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+x509.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+x509.o: ../include/openssl/pkcs7.h ../include/openssl/rc2.h
 x509.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
 x509.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
 x509.o: ../include/openssl/safestack.h ../include/openssl/sha.h

apps/apps.c

@@ -170,8 +170,6 @@ int str2fmt(char *s)
 		|| (strcmp(s,"PKCS12") == 0) || (strcmp(s,"pkcs12") == 0)
 		|| (strcmp(s,"P12") == 0) || (strcmp(s,"p12") == 0))
 		return(FORMAT_PKCS12);
-	else if ((*s == 'E') || (*s == 'e'))
-		return(FORMAT_ENGINE);
 	else
 		return(FORMAT_UNDEF);
 	}

apps/apps.h

@@ -162,8 +162,6 @@ STACK_OF(X509) *load_certs(BIO *err, char *file, int format);
 #define FORMAT_NETSCAPE 4
 #define FORMAT_PKCS12   5
 #define FORMAT_SMIME    6
-/* Since this is currently inofficial, let's give it a high number */
-#define FORMAT_ENGINE   127
 
 #define NETSCAPE_CERT_HDR	"certificate"
 

apps/ca.c

@@ -74,7 +74,6 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #ifndef W_OK
 #  ifdef VMS
@@ -168,7 +167,6 @@ static char *ca_usage[]={
 " -revoke file    - Revoke a certificate (given in file)\n",
 " -extensions ..  - Extension section (override value in config file)\n",
 " -crlexts ..     - CRL extension section (override value in config file)\n",
-" -engine e       - use engine e, possibly a hardware device.\n",
 NULL
 };
 
@@ -218,7 +216,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	char *key=NULL,*passargin=NULL;
 	int total=0;
 	int total_done=0;
@@ -271,7 +268,6 @@ int MAIN(int argc, char **argv)
 #define BSIZE 256
 	MS_STATIC char buf[3][BSIZE];
 	char *randfile=NULL;
-	char *engine = NULL;
 
 #ifdef EFENCE
 EF_PROTECT_FREE=1;
@@ -423,11 +419,6 @@ EF_ALIGNMENT=0;
 			if (--argc < 1) goto bad;
 			crl_ext= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else
 			{
 bad:
@@ -448,24 +439,6 @@ bad:
 
 	ERR_load_crypto_strings();
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto err;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto err;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	/*****************************************************************/
 	if (configfile == NULL) configfile = getenv("OPENSSL_CONF");
 	if (configfile == NULL) configfile = getenv("SSLEAY_CONF");
@@ -1247,7 +1220,11 @@ bad:
 			X509_free(revcert);
 
 			strncpy(buf[0],dbfile,BSIZE-4);
+#ifndef VMS
 			strcat(buf[0],".new");
+#else
+			strcat(buf[0],"-new");
+#endif
 			if (BIO_write_filename(out,buf[0]) <= 0)
 				{
 				perror(dbfile);
@@ -1257,7 +1234,11 @@ bad:
 			j=TXT_DB_write(out,db);
 			if (j <= 0) goto err;
 			strncpy(buf[1],dbfile,BSIZE-4);
+#ifndef VMS
 			strcat(buf[1],".old");
+#else
+			strcat(buf[1],"-old");
+#endif
 			if (rename(dbfile,buf[1]) < 0)
 				{
 				BIO_printf(bio_err,"unable to rename %s to %s\n", dbfile, buf[1]);

apps/dgst.c

@@ -66,7 +66,6 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -74,14 +73,13 @@
 #undef PROG
 #define PROG	dgst_main
 
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		EVP_PKEY *key, unsigned char *sigin, int siglen);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
 	int i,err=0;
 	const EVP_MD *md=NULL,*m;
@@ -95,11 +93,10 @@ int MAIN(int argc, char **argv)
 	int debug=0;
 	const char *outfile = NULL, *keyfile = NULL;
 	const char *sigfile = NULL, *randfile = NULL;
-	char out_bin = -1, want_pub = 0, do_verify = 0;
+	int out_bin = -1, want_pub = 0, do_verify = 0;
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
-	char *engine=NULL;
 
 	apps_startup();
 
@@ -157,11 +154,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			sigfile=*(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) break;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
@@ -198,7 +190,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
-		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 
 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -218,24 +209,6 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
 	if (debug)
@@ -365,7 +338,7 @@ end:
 	EXIT(err);
 	}
 
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			EVP_PKEY *key, unsigned char *sigin, int siglen)
 	{
 	int len;

apps/dh.c

@@ -69,7 +69,6 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dh_main
@@ -88,12 +87,11 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
 
 	apps_startup();
 
@@ -101,7 +99,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	engine=NULL;
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -132,11 +129,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -168,30 +160,11 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
-		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))

apps/dhparam.c

@@ -121,7 +121,6 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #ifndef NO_DSA
 #include <openssl/dsa.h>
@@ -149,7 +148,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef NO_DSA
@@ -158,7 +156,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL,*engine=NULL;
+	char *inrand=NULL;
 	int num = 0, g = 0;
 
 	apps_startup();
@@ -197,11 +195,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -247,7 +240,6 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
-		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -257,24 +249,6 @@ bad:
 
 	ERR_load_crypto_strings();
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if (g && !num)
 		num = DEFBITS;
 

apps/dsa.c

@@ -68,7 +68,6 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dsa_main
@@ -88,7 +87,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -96,7 +94,7 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -107,7 +105,6 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
-	engine=NULL;
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -148,11 +145,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -184,7 +176,6 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
-		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef NO_IDEA
@@ -198,24 +189,6 @@ bad:
 
 	ERR_load_crypto_strings();
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
 		goto end;

apps/dsaparam.c

@@ -69,7 +69,6 @@
 #include <openssl/dsa.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	dsaparam_main
@@ -91,12 +90,11 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*inrand=NULL,*engine=NULL;
+	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
 

apps/enc.c

@@ -70,7 +70,6 @@
 #include <openssl/md5.h>
 #endif
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 int set_hex(char *in,unsigned char *out,int size);
 #undef SIZE
@@ -85,7 +84,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	static const char magic[]="Salted__";
 	char mbuf[8];	/* should be 1 smaller than magic */
 	char *strbuf=NULL;
@@ -103,7 +101,6 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  16
 	char pname[PROG_NAME_SIZE];
-	char *engine = NULL;
 
 	apps_startup();
 
@@ -144,11 +141,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -249,7 +241,6 @@ bad:
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
-			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
 
 			BIO_printf(bio_err,"Cipher Types\n");
 			BIO_printf(bio_err,"des     : 56 bit key DES encryption\n");
@@ -323,24 +314,6 @@ bad:
 		argv++;
 		}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if (bufsize != NULL)
 		{
 		unsigned long n;
@@ -542,6 +515,14 @@ bad:
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
+		if ((hiv == NULL) && (str == NULL))
+			{
+			/* No IV was explicitly set and no IV was generated
+			 * during EVP_BytesToKey. Hence the IV is undefined,
+			 * making correct decryption impossible. */
+			BIO_printf(bio_err, "iv undefined\n");
+			goto end;
+			}
 		if ((hkey != NULL) && !set_hex(hkey,key,24))
 			{
 			BIO_printf(bio_err,"invalid hex key value\n");

apps/gendh.c

@@ -70,7 +70,6 @@
 #include <openssl/dh.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
@@ -82,13 +81,11 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
-	char *engine=NULL;
 	BIO *out=NULL;
 
 	apps_startup();
@@ -113,11 +110,6 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -133,34 +125,15 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"usage: gendh [args] [numbits]\n");
 		BIO_printf(bio_err," -out file - output the key to 'file\n");
-		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
-	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
-		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
-		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+		BIO_printf(bio_err," -2    use 2 as the generator value\n");
+	/*	BIO_printf(bio_err," -3    use 3 as the generator value\n"); */
+		BIO_printf(bio_err," -5    use 5 as the generator value\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
 		{

apps/gendsa.c

@@ -68,7 +68,6 @@
 #include <openssl/dsa.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
@@ -78,7 +77,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -86,7 +84,6 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	EVP_CIPHER *enc=NULL;
-	char *engine=NULL;
 
 	apps_startup();
 
@@ -109,11 +106,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -153,7 +145,6 @@ bad:
 #ifndef NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
-		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -162,24 +153,6 @@ bad:
 		goto end;
 		}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
 		goto end;

apps/genrsa.c

@@ -69,7 +69,6 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #define DEFBITS	512
 #undef PROG
@@ -81,7 +80,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
@@ -90,7 +88,6 @@ int MAIN(int argc, char **argv)
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
-	char *engine=NULL;
 	char *inrand=NULL;
 	BIO *out=NULL;
 
@@ -119,11 +116,6 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -162,7 +154,6 @@ bad:
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
-		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -176,24 +167,6 @@ bad:
 		goto err;
 	}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto err;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto err;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if (outfile == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
@@ -213,8 +186,7 @@ bad:
 			}
 		}
 
-	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
-		&& !RAND_status())
+	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 		{
 		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
 		}

apps/passwd.c

@@ -272,6 +272,7 @@ int MAIN(int argc, char **argv)
 			}
 		while (!done);
 		}
+	ret = 0;
 
 err:
 	ERR_print_errors(bio_err);

apps/pkcs12.c

@@ -66,7 +66,6 @@
 #include <openssl/err.h>
 #include <openssl/pem.h>
 #include <openssl/pkcs12.h>
-#include <openssl/engine.h>
 
 #define PROG pkcs12_main
 
@@ -93,7 +92,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
-    ENGINE *e = NULL;
     char *infile=NULL, *outfile=NULL, *keyname = NULL;	
     char *certfile=NULL;
     BIO *in=NULL, *out = NULL, *inkey = NULL, *certsin = NULL;
@@ -120,7 +118,6 @@ int MAIN(int argc, char **argv)
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
     char *CApath = NULL, *CAfile = NULL;
-    char *engine=NULL;
 
     apps_startup();
 
@@ -239,11 +236,6 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
-		} else if (!strcmp(*args,"-engine")) {
-		    if (args[1]) {
-			args++;	
-			engine = *args;
-		    } else badarg = 1;
 		} else badarg = 1;
 
 	} else badarg = 1;
@@ -287,27 +279,12 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
-	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
     	goto end;
     }
 
-    if (engine != NULL) {
-	if((e = ENGINE_by_id(engine)) == NULL) {
-	    BIO_printf(bio_err,"invalid engine \"%s\"\n", engine);
-	    goto end;
-	}
-	if(!ENGINE_set_default(e, ENGINE_METHOD_ALL)) {
-	    BIO_printf(bio_err,"can't use that engine\n");
-	    goto end;
-	}
-	BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-	/* Free our "structural" reference. */
-	ENGINE_free(e);
-    }
-
     if(passarg) {
 	if(export_cert) passargout = passarg;
 	else passargin = passarg;

apps/pkcs7.c

@@ -67,7 +67,6 @@
 #include <openssl/x509.h>
 #include <openssl/pkcs7.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	pkcs7_main
@@ -83,7 +82,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
@@ -91,7 +89,6 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
 	int ret=0;
-	char *engine=NULL;
 
 	apps_startup();
 
@@ -135,11 +132,6 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -162,30 +154,11 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
-		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 		EXIT(1);
 		}
 
 	ERR_load_crypto_strings();
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))

apps/pkcs8.c

@@ -62,7 +62,6 @@
 #include <openssl/err.h>
 #include <openssl/evp.h>
 #include <openssl/pkcs12.h>
-#include <openssl/engine.h>
 
 #include "apps.h"
 #define PROG pkcs8_main
@@ -71,7 +70,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
-	ENGINE *e = NULL;
 	char **args, *infile = NULL, *outfile = NULL;
 	char *passargin = NULL, *passargout = NULL;
 	BIO *in = NULL, *out = NULL;
@@ -87,13 +85,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
-	char *engine=NULL;
-
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
-
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
-
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	args = argv + 1;
@@ -144,11 +138,6 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
-		else if (strcmp(*args,"-engine") == 0)
-			{
-			if (!args[1]) goto bad;
-			engine= *(++args);
-			}
 		else if (!strcmp (*args, "-in")) {
 			if (args[1]) {
 				args++;
@@ -181,28 +170,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
-		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		return (1);
 	}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			return (1);
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			return (1);
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
 		return (1);

apps/rand.c

@@ -9,7 +9,6 @@
 #include <openssl/bio.h>
 #include <openssl/err.h>
 #include <openssl/rand.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG rand_main
@@ -24,7 +23,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -32,7 +30,6 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
-	char *engine=NULL;
 
 	apps_startup();
 
@@ -51,13 +48,6 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
-		if (strcmp(argv[i], "-engine") == 0)
-			{
-			if ((argv[i+1] != NULL) && (engine == NULL))
-				engine = argv[++i];
-			else
-				badopt = 1;
-			}
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -94,31 +84,12 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, "-out file             - write to file\n");
-		BIO_printf(bio_err," -engine e             - use engine e, possibly a hardware device.\n");
-		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-		BIO_printf(bio_err, "-base64               - encode output\n");
+		BIO_printf(bio_err, "-out file            - write to file\n");
+		BIO_printf(bio_err, "-rand file%cfile%c...  - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
+		BIO_printf(bio_err, "-base64              - encode output\n");
 		goto err;
 		}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto err;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto err;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
 		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",

apps/req.c

@@ -73,7 +73,6 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #define SECTION		"req"
 
@@ -141,7 +140,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 #ifndef NO_DSA
 	DSA *dsa_params=NULL;
 #endif
@@ -154,7 +152,6 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
-	char *engine=NULL;
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	EVP_CIPHER *cipher=NULL;
@@ -198,11 +195,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -383,7 +375,6 @@ bad:
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
-		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -key file	use the private key contained in file\n");
 		BIO_printf(bio_err," -keyform arg   key file format\n");
 		BIO_printf(bio_err," -keyout arg    file to send the key to\n");
@@ -531,55 +522,24 @@ bad:
 	if ((in == NULL) || (out == NULL))
 		goto end;
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if (keyfile != NULL)
 		{
-		if (keyform == FORMAT_ENGINE)
+		if (BIO_read_filename(in,keyfile) <= 0)
 			{
-			if (!e)
-				{
-				BIO_printf(bio_err,"no engine specified\n");
-				goto end;
-				}
-			pkey = ENGINE_load_private_key(e, keyfile, NULL);
+			perror(keyfile);
+			goto end;
+			}
+
+		if (keyform == FORMAT_ASN1)
+			pkey=d2i_PrivateKey_bio(in,NULL);
+		else if (keyform == FORMAT_PEM)
+			{
+			pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,passin);
 			}
 		else
 			{
-			if (BIO_read_filename(in,keyfile) <= 0)
-				{
-				perror(keyfile);
-				goto end;
-				}
-
-			if (keyform == FORMAT_ASN1)
-				pkey=d2i_PrivateKey_bio(in,NULL);
-			else if (keyform == FORMAT_PEM)
-				{
-				pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,
-					passin);
-				}
-			else
-				{
-				BIO_printf(bio_err,"bad input format specified for X509 request\n");
-				goto end;
-				}
+			BIO_printf(bio_err,"bad input format specified for X509 request\n");
+			goto end;
 			}
 
 		if (pkey == NULL)

apps/rsa.c

@@ -68,7 +68,6 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	rsa_main
@@ -91,7 +90,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,badops=0, sgckey=0;
@@ -102,7 +100,6 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
-	char *engine=NULL;
 	int modulus=0;
 
 	apps_startup();
@@ -151,11 +148,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -203,30 +195,11 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
-		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
 		goto end;

apps/rsautl.c

@@ -62,7 +62,6 @@
 #include <string.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #define RSA_SIGN 	1
 #define RSA_VERIFY 	2
@@ -83,7 +82,6 @@ int MAIN(int argc, char **);
 
 int MAIN(int argc, char **argv)
 {
-	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
 	char *keyfile = NULL;
@@ -97,7 +95,6 @@ int MAIN(int argc, char **argv)
 	unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
 	int rsa_inlen, rsa_outlen = 0;
 	int keysize;
-	char *engine=NULL;
 
 	int ret = 1;
 
@@ -120,9 +117,6 @@ int MAIN(int argc, char **argv)
 		} else if(!strcmp(*argv, "-inkey")) {
 			if (--argc < 1) badarg = 1;
 			keyfile = *(++argv);
-		} else if(!strcmp(*argv, "-engine")) {
-			if (--argc < 1) badarg = 1;
-			engine = *(++argv);
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -157,24 +151,6 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
 	
@@ -304,7 +280,6 @@ static void usage()
 	BIO_printf(bio_err, "-inkey file     input key\n");
 	BIO_printf(bio_err, "-pubin          input is an RSA public\n");
 	BIO_printf(bio_err, "-certin         input is a certificate carrying an RSA public key\n");
-	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
 	BIO_printf(bio_err, "-ssl            use SSL v2 padding\n");
 	BIO_printf(bio_err, "-raw            use no padding\n");
 	BIO_printf(bio_err, "-pkcs           use PKCS#1 v1.5 padding (default)\n");

apps/s_client.c

@@ -79,7 +79,7 @@ typedef unsigned int u_int;
 #include <openssl/ssl.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
+#include <openssl/rand.h>
 #include "s_apps.h"
 
 #ifdef WINDOWS
@@ -154,7 +154,7 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -cipher       - preferred cipher to use, use the 'openssl ciphers'\n");
 	BIO_printf(bio_err,"                 command to see what is available\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+
 	}
 
 int MAIN(int, char **);
@@ -182,8 +182,6 @@ int MAIN(int argc, char **argv)
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
-	char *engine_id=NULL;
-	ENGINE *e=NULL;
 #ifdef WINDOWS
 	struct timeval tv;
 #endif
@@ -326,11 +324,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
-		else if	(strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine_id = *(++argv);
-			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -371,30 +364,6 @@ bad:
 
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
-
-	if (engine_id != NULL)
-		{
-		if((e = ENGINE_by_id(engine_id)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (c_debug)
-			{
-			ENGINE_ctrl(e, ENGINE_CTRL_SET_LOGSTREAM,
-				0, bio_err, 0);
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine_id);
-		ENGINE_free(e);
-		}
-
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{

apps/s_server.c

@@ -83,7 +83,7 @@ typedef unsigned int u_int;
 #include <openssl/pem.h>
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
-#include <openssl/engine.h>
+#include <openssl/rand.h>
 #include "s_apps.h"
 
 #ifdef WINDOWS
@@ -177,7 +177,6 @@ static int s_debug=0;
 static int s_quiet=0;
 
 static int hack=0;
-static char *engine_id=NULL;
 
 #ifdef MONOLITH
 static void s_server_init(void)
@@ -200,7 +199,6 @@ static void s_server_init(void)
 	s_debug=0;
 	s_quiet=0;
 	hack=0;
-	engine_id=NULL;
 	}
 #endif
 
@@ -246,7 +244,6 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -www          - Respond to a 'GET /' with a status page\n");
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 	}
 
 static int local_argc=0;
@@ -417,8 +414,6 @@ int MAIN(int argc, char *argv[])
 	int state=0;
 	SSL_METHOD *meth=NULL;
 	char *inrand=NULL;
-	char *engine_id=NULL;
-	ENGINE *e=NULL;
 #ifndef NO_DH
 	DH *dh=NULL;
 #endif
@@ -578,11 +573,6 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine_id= *(++argv);
-			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -634,29 +624,6 @@ bad:
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 
-	if (engine_id != NULL)
-		{
-		if((e = ENGINE_by_id(engine_id)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (s_debug)
-			{
-			ENGINE_ctrl(e, ENGINE_CTRL_SET_LOGSTREAM,
-				0, bio_err, 0);
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine_id);
-		ENGINE_free(e);
-		}
-
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -1385,15 +1352,29 @@ static int www_body(char *hostname, int s, unsigned char *context)
 
 			/* skip the '/' */
 			p= &(buf[5]);
-			dot=0;
+
+			dot = 1;
 			for (e=p; *e != '\0'; e++)
 				{
-				if (e[0] == ' ') break;
-				if (	(e[0] == '.') &&
-					(strncmp(&(e[-1]),"/../",4) == 0))
-					dot=1;
+				if (e[0] == ' ')
+					break;
+
+				switch (dot)
+					{
+				case 1:
+					dot = (e[0] == '.') ? 2 : 0;
+					break;
+				case 2:
+					dot = (e[0] == '.') ? 3 : 0;
+					break;
+				case 3:
+					dot = (e[0] == '/') ? -1 : 0;
+					break;
+					}
+				if (dot == 0)
+					dot = (e[0] == '/') ? 1 : 0;
 				}
-			
+			dot = (dot == 3) || (dot == -1); /* filename contains ".." component */
 
 			if (*e == '\0')
 				{
@@ -1417,9 +1398,11 @@ static int www_body(char *hostname, int s, unsigned char *context)
 				break;
 				}
 
+#if 0
 			/* append if a directory lookup */
 			if (e[-1] == '/')
 				strcat(p,"index.html");
+#endif
 
 			/* if a directory, do the index thang */
 			if (stat(p,&st_buf) < 0)
@@ -1431,7 +1414,13 @@ static int www_body(char *hostname, int s, unsigned char *context)
 				}
 			if (S_ISDIR(st_buf.st_mode))
 				{
+#if 0 /* must check buffer size */
 				strcat(p,"/index.html");
+#else
+				BIO_puts(io,text);
+				BIO_printf(io,"'%s' is a directory\r\n",p);
+				break;
+#endif
 				}
 
 			if ((file=BIO_new_file(p,"r")) == NULL)

apps/smime.c

@@ -64,7 +64,6 @@
 #include <openssl/crypto.h>
 #include <openssl/pem.h>
 #include <openssl/err.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG smime_main
@@ -82,7 +81,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
-	ENGINE *e = NULL;
 	int operation = 0;
 	int ret = 0;
 	char **args;
@@ -105,9 +103,8 @@ int MAIN(int argc, char **argv)
 	char *inrand = NULL;
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
-	char *engine=NULL;
-
 	args = argv + 1;
+
 	ret = 1;
 
 	while (!badarg && *args && *args[0] == '-') {
@@ -156,11 +153,6 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
-		} else if (!strcmp(*args,"-engine")) {
-			if (args[1]) {
-				args++;
-				engine = *args;
-			} else badarg = 1;
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -298,7 +290,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-text          include or delete text MIME headers\n");
 		BIO_printf (bio_err, "-CApath dir    trusted certificates directory\n");
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
-		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
+		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,  "               the random number generator\n");
@@ -306,24 +298,6 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
 		goto end;

apps/speed.c

@@ -81,14 +81,13 @@
 #include <openssl/crypto.h>
 #include <openssl/rand.h>
 #include <openssl/err.h>
-#include <openssl/engine.h>
 
-#if defined(__FreeBSD__)
+#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
 # define USE_TOD
 #elif !defined(MSDOS) && (!defined(VMS) || defined(__DECC))
 # define TIMES
 #endif
-#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(MPE)
+#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(MPE) && !defined(__NetBSD__)
 # define TIMEB
 #endif
 
@@ -311,7 +310,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e;
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 #define ALGOR_NUM	15
@@ -472,37 +470,6 @@ int MAIN(int argc, char **argv)
 		{
 		if	((argc > 0) && (strcmp(*argv,"-elapsed") == 0))
 			usertime = 0;
-		else
-		if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
-			{
-			argc--;
-			argv++;
-			if(argc == 0)
-				{
-				BIO_printf(bio_err,"no engine given\n");
-				goto end;
-				}
-			if((e = ENGINE_by_id(*argv)) == NULL)
-				{
-				BIO_printf(bio_err,"invalid engine \"%s\"\n",
-					*argv);
-				goto end;
-				}
-			if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-				{
-				BIO_printf(bio_err,"can't use that engine\n");
-				goto end;
-				}
-			BIO_printf(bio_err,"engine \"%s\" set.\n", *argv);
-			/* Free our "structural" reference. */
-			ENGINE_free(e);
-			/* It will be increased again further down.  We just
-			   don't want speed to confuse an engine with an
-			   algorithm, especially when none is given (which
-			   means all of them should be run) */
-			j--;
-			}
-		else
 #ifndef NO_MD2
 		if	(strcmp(*argv,"md2") == 0) doit[D_MD2]=1;
 		else
@@ -550,7 +517,7 @@ int MAIN(int argc, char **argv)
 #ifdef RSAref
 			if (strcmp(*argv,"rsaref") == 0) 
 			{
-			RSA_set_default_openssl_method(RSA_PKCS1_RSAref());
+			RSA_set_default_method(RSA_PKCS1_RSAref());
 			j--;
 			}
 		else
@@ -558,7 +525,7 @@ int MAIN(int argc, char **argv)
 #ifndef RSA_NULL
 			if (strcmp(*argv,"openssl") == 0) 
 			{
-			RSA_set_default_openssl_method(RSA_PKCS1_SSLeay());
+			RSA_set_default_method(RSA_PKCS1_SSLeay());
 			j--;
 			}
 		else
@@ -703,12 +670,11 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err,"\n");
 #endif
 
+#ifdef TIMES
 			BIO_printf(bio_err,"\n");
 			BIO_printf(bio_err,"Available options:\n");
-#ifdef TIMES
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
-			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 			goto end;
 			}
 		argc--;
@@ -865,6 +831,7 @@ int MAIN(int argc, char **argv)
 		}
 #endif
 
+#ifndef NO_DSA
 	dsa_c[R_DSA_512][0]=count/1000;
 	dsa_c[R_DSA_512][1]=count/1000/2;
 	for (i=1; i<DSA_NUM; i++)
@@ -882,6 +849,7 @@ int MAIN(int argc, char **argv)
 				}
 			}				
 		}
+#endif
 
 #define COND(d)	(count < (d))
 #define COUNT(d) (d)
@@ -1207,7 +1175,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_printf(bio_err,"RSA verify failure.  No RSA verify will be done.\n");
 			ERR_print_errors(bio_err);
-			dsa_doit[j] = 0;
+			rsa_doit[j] = 0;
 			}
 		else
 			{
@@ -1413,7 +1381,6 @@ int MAIN(int argc, char **argv)
 #endif
 	mret=0;
 end:
-	ERR_print_errors(bio_err);
 	if (buf != NULL) OPENSSL_free(buf);
 	if (buf2 != NULL) OPENSSL_free(buf2);
 #ifndef NO_RSA

apps/spkac.c

@@ -69,7 +69,6 @@
 #include <openssl/lhash.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	spkac_main
@@ -82,7 +81,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	int i,badops=0, ret = 1;
 	BIO *in = NULL,*out = NULL, *key = NULL;
 	int verify=0,noout=0,pubkey=0;
@@ -93,7 +91,6 @@ int MAIN(int argc, char **argv)
 	LHASH *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
-	char *engine=NULL;
 
 	apps_startup();
 
@@ -139,11 +136,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -169,7 +161,6 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
-		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
 		goto end;
 		}
 
@@ -179,24 +170,6 @@ bad:
 		goto end;
 	}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if(keyfile) {
 		if(strcmp(keyfile, "-")) key = BIO_new_file(keyfile, "r");
 		else key = BIO_new_fp(stdin, BIO_NOCLOSE);

apps/verify.c

@@ -65,7 +65,6 @@
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG	verify_main
@@ -79,7 +78,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	int i,ret=1;
 	int purpose = -1;
 	char *CApath=NULL,*CAfile=NULL;
@@ -87,7 +85,6 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
-	char *engine=NULL;
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -140,11 +137,6 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
-			else if (strcmp(*argv,"-engine") == 0)
-				{
-				if (--argc < 1) goto end;
-				engine= *(++argv);
-				}
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-issuer_checks") == 0)
@@ -162,24 +154,6 @@ int MAIN(int argc, char **argv)
 			break;
 		}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
 	if (CAfile) {
@@ -227,7 +201,7 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-engine e] cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;

apps/x509.c

@@ -73,7 +73,6 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#include <openssl/engine.h>
 
 #undef PROG
 #define PROG x509_main
@@ -130,7 +129,6 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
-" -engine e       - use engine e, possibly a hardware device.\n",
 NULL
 };
 
@@ -147,7 +145,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL;
 	int ret=1;
 	X509_REQ *req=NULL;
 	X509 *x=NULL,*xca=NULL;
@@ -178,7 +175,6 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0;
-	char *engine=NULL;
 
 	reqfile=0;
 
@@ -341,11 +337,6 @@ int MAIN(int argc, char **argv)
 			alias= *(++argv);
 			trustout = 1;
 			}
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
@@ -429,24 +420,6 @@ bad:
 		goto end;
 		}
 
-	if (engine != NULL)
-		{
-		if((e = ENGINE_by_id(engine)) == NULL)
-			{
-			BIO_printf(bio_err,"invalid engine \"%s\"\n",
-				engine);
-			goto end;
-			}
-		if(!ENGINE_set_default(e, ENGINE_METHOD_ALL))
-			{
-			BIO_printf(bio_err,"can't use that engine\n");
-			goto end;
-			}
-		BIO_printf(bio_err,"engine \"%s\" set.\n", engine);
-		/* Free our "structural" reference. */
-		ENGINE_free(e);
-		}
-
 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);
 
@@ -894,8 +867,10 @@ bad:
 
 				BIO_printf(bio_err,"Generating certificate request\n");
 
+#ifndef NO_DSA
 		                if (pk->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
+#endif
 
 				rq=X509_to_X509_REQ(x,pk,digest);
 				EVP_PKEY_free(pk);

config

@@ -49,10 +49,18 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		if [ "x$VERSION" = "x2.1.1" ]; then
+		if [ "x$VERSION" = "x2.01" ]; then
+		    echo "${MACHINE}-whatever-unixware201"; exit 0
+		elif [ "x$VERSION" = "x2.02" ]; then
+		    echo "${MACHINE}-whatever-unixware202"; exit 0
+		elif [ "x$VERSION" = "x2.03" ]; then
+		    echo "${MACHINE}-whatever-unixware203"; exit 0
+		elif [ "x$VERSION" = "x2.1.1" ]; then
 		    echo "${MACHINE}-whatever-unixware211"; exit 0
 		elif [ "x$VERSION" = "x2.1.2" ]; then
 		    echo "${MACHINE}-whatever-unixware212"; exit 0
+		elif [ "x$VERSION" = "x2.1.3" ]; then
+		    echo "${MACHINE}-whatever-unixware213"; exit 0
 		else
 		    echo "${MACHINE}-whatever-unixware2"; exit 0
 		fi
@@ -79,6 +87,14 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "m68k-apple-aux3"; exit 0
 	;;
 
+    AIX:[3456789]:4:*)
+	echo "${MACHINE}-ibm-aix43"; exit 0
+	;;
+
+    AIX:*:[56789]:*)
+	echo "${MACHINE}-ibm-aix43"; exit 0
+	;;
+
     AIX:*)
 	echo "${MACHINE}-ibm-aix"; exit 0
 	;;
@@ -473,9 +489,12 @@ case "$GUESSOS" in
   *-*-unixware7) OUT="unixware-7" ;;
   *-*-UnixWare7) OUT="unixware-7" ;;
   *-*-Unixware7) OUT="unixware-7" ;;
-  *-*-unixware[1-2]*) OUT="unixware-2.0" ;;
-  *-*-UnixWare[1-2]*) OUT="unixware-2.0" ;;
-  *-*-Unixware[1-2]*) OUT="unixware-2.0" ;;
+  *-*-unixware20*) OUT="unixware-2.0" ;;
+  *-*-unixware21*) OUT="unixware-2.1" ;;
+  *-*-UnixWare20*) OUT="unixware-2.0" ;;
+  *-*-UnixWare21*) OUT="unixware-2.1" ;;
+  *-*-Unixware20*) OUT="unixware-2.0" ;;
+  *-*-Unixware21*) OUT="unixware-2.1" ;;
   BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
   RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
   *-siemens-sysv4) OUT="SINIX" ;;
@@ -489,27 +508,11 @@ case "$GUESSOS" in
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
-# NB: This atalla support has been superceded by the ENGINE support
-# That contains its own header and definitions anyway. Support can
-# be enabled or disabled on any supported platform without external
-# headers, eg. by adding the "hw-atalla" switch to ./config or
-# perl Configure
-#
 # See whether we can compile Atalla support
-#if [ -f /usr/include/atasi.h ]
-#then
-#  options="$options -DATALLA"
-#fi
-
-#get some basic shared lib support (behnke@trustcenter.de)
-case "$OUT" in
-   solaris-*-gcc)
-	if  [ "$SHARED" = "true" ] 
-	 then
-	  options="$options -DPIC -fPIC"
-        fi
-     ;;
-esac
+if [ -f /usr/include/atasi.h ]
+then
+  options="$options -DATALLA"
+fi
 
 # gcc < 2.8 does not support -mcpu=ultrasparc
 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]

crypto/Makefile.ssl

@@ -27,7 +27,7 @@ LIBS=
 
 SDIRS=	md2 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn rsa dsa dh dso engine \
+	bn rsa dsa dh dso \
 	buffer bio stack lhash rand err objects \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp
 

crypto/asn1/asn1_lib.c

@@ -301,7 +301,7 @@ int asn1_GetSequence(ASN1_CTX *c, long *length)
 		return(0);
 		}
 	if (c->inf == (1|V_ASN1_CONSTRUCTED))
-		c->slen= *length+ *(c->pp)-c->p;
+		c->slen= *length;
 	c->eos=0;
 	return(1);
 	}

crypto/asn1/p7_lib.c

@@ -307,12 +307,14 @@ PKCS7 *d2i_PKCS7(PKCS7 **a, unsigned char **pp, long length)
 			}
 		if (Tinf == (1|V_ASN1_CONSTRUCTED))
 			{
+			c.q=c.p;
 			if (!ASN1_check_infinite_end(&c.p,c.slen))
 				{
 				c.error=ERR_R_MISSING_ASN1_EOS;
 				c.line=__LINE__;
 				goto err;
 				}
+			c.slen-=(c.p-c.q);
 			}
 		}
 	else

crypto/asn1/t_x509.c

@@ -349,6 +349,8 @@ int X509_NAME_print(BIO *bp, X509_NAME *name, int obase)
 	ll=80-2-obase;
 
 	s=X509_NAME_oneline(name,buf,256);
+	if (!*s)
+		return 1;
 	s++; /* skip the first slash */
 
 	l=ll;

crypto/asn1/x_name.c

@@ -141,11 +141,12 @@ static int i2d_X509_NAME_entries(X509_NAME *a)
 			}
 		size+=i2d_X509_NAME_ENTRY(ne,NULL);
 		}
-	/* If empty no extra SET OF needed */
-	if (ret)
-		ret+=ASN1_object_size(1,size,V_ASN1_SET);
 	if (fe != NULL)
+		{
+		/* SET OF needed only if entries is non empty */
+		ret+=ASN1_object_size(1,size,V_ASN1_SET);
 		fe->size=size;
+		}
 
 	r=ASN1_object_size(1,ret,V_ASN1_SEQUENCE);
 

crypto/asn1/x_pubkey.c

@@ -234,7 +234,7 @@ EVP_PKEY *X509_PUBKEY_get(X509_PUBKEY *key)
 	a=key->algor;
 	if (ret->type == EVP_PKEY_DSA)
 		{
-		if (a->parameter->type == V_ASN1_SEQUENCE)
+		if (a->parameter && (a->parameter->type == V_ASN1_SEQUENCE))
 			{
 			ret->pkey.dsa->write_params=0;
 			p=a->parameter->value.sequence->data;

crypto/bio/Makefile.ssl

@@ -96,13 +96,13 @@ b_dump.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 b_dump.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
 b_dump.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 b_dump.o: ../cryptlib.h
-b_print.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-b_print.o: ../../include/openssl/crypto.h ../../include/openssl/e_os.h
-b_print.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-b_print.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-b_print.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
-b_print.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-b_print.o: ../cryptlib.h
+b_print.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
+b_print.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
+b_print.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+b_print.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
+b_print.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+b_print.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+b_print.o: ../../include/openssl/symhacks.h ../cryptlib.h
 b_sock.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
 b_sock.o: ../../include/openssl/crypto.h ../../include/openssl/e_os.h
 b_sock.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h

crypto/bio/b_print.c

@@ -69,6 +69,7 @@
 #ifndef NO_SYS_TYPES_H
 #include <sys/types.h>
 #endif
+#include <openssl/bn.h>         /* To get BN_LLONG properly defined */
 #include <openssl/bio.h>
 
 #ifdef BN_LLONG
@@ -108,7 +109,11 @@
 #endif
 
 #if HAVE_LONG_LONG
-#define LLONG long long
+# if defined(WIN32) && !defined(__GNUC__)
+# define LLONG _int64
+# else
+# define LLONG long long
+# endif
 #else
 #define LLONG long
 #endif
@@ -151,7 +156,7 @@ static void _dopr(char **sbuffer, char **buffer,
 
 /* some handy macros */
 #define char_to_int(p) (p - '0')
-#define MAX(p,q) ((p >= q) ? p : q)
+#define OSSL_MAX(p,q) ((p >= q) ? p : q)
 
 static void
 _dopr(
@@ -502,13 +507,13 @@ fmtint(
     convert[place] = 0;
 
     zpadlen = max - place;
-    spadlen = min - MAX(max, place) - (signvalue ? 1 : 0);
+    spadlen = min - OSSL_MAX(max, place) - (signvalue ? 1 : 0);
     if (zpadlen < 0)
         zpadlen = 0;
     if (spadlen < 0)
         spadlen = 0;
     if (flags & DP_F_ZERO) {
-        zpadlen = MAX(zpadlen, spadlen);
+        zpadlen = OSSL_MAX(zpadlen, spadlen);
         spadlen = 0;
     }
     if (flags & DP_F_MINUS)
@@ -640,7 +645,7 @@ fmtfp(
             (caps ? "0123456789ABCDEF"
               : "0123456789abcdef")[fracpart % 10];
         fracpart = (fracpart / 10);
-    } while (fracpart && (fplace < 20));
+    } while (fplace < max);
     if (fplace == 20)
         fplace--;
     fconvert[fplace] = 0;

crypto/bio/bf_buff.c

@@ -70,7 +70,7 @@ static long buffer_ctrl(BIO *h, int cmd, long arg1, void *arg2);
 static int buffer_new(BIO *h);
 static int buffer_free(BIO *data);
 static long buffer_callback_ctrl(BIO *h, int cmd, bio_info_cb *fp);
-#define DEFAULT_BUFFER_SIZE	1024
+#define DEFAULT_BUFFER_SIZE	4096
 
 static BIO_METHOD methods_buffer=
 	{

crypto/bn/asm/mips3.s

@@ -1,5 +1,5 @@
 .rdata
-.asciiz "mips3.s, Version 1.0"
+.asciiz	"mips3.s, Version 1.1"
 .asciiz	"MIPS III/IV ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
 
 /*
@@ -586,13 +586,13 @@ LEAF(bn_div_3_words)
 	ld	a0,(a3)
 	move	ta2,a1
 	ld	a1,-8(a3)
-	move	ta3,ra
-	move	v1,zero
+	bne	a0,a2,.L_bn_div_3_words_proceed
 	li	v0,-1
-	beq	a0,a2,.L_bn_div_3_words_skip_div
+	jr	ra
+.L_bn_div_3_words_proceed:
+	move	ta3,ra
 	bal	bn_div_words
 	move	ra,ta3
-.L_bn_div_3_words_skip_div:
 	dmultu	ta2,v0
 	ld	t2,-16(a3)
 	move	ta0,zero
@@ -849,6 +849,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -856,7 +857,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -884,6 +886,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_3,b_1		/* mul_add_c(a[3],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -891,7 +894,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -928,6 +932,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_1,b_4		/* mul_add_c(a[1],b[4],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -935,7 +940,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_2,b_3		/* mul_add_c(a[2],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -981,6 +987,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_5,b_1		/* mul_add_c(a[5],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -988,7 +995,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_4,b_2		/* mul_add_c(a[4],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1043,6 +1051,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_1,b_6		/* mul_add_c(a[1],b[6],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1050,7 +1059,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_2,b_5		/* mul_add_c(a[2],b[5],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1114,6 +1124,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_6,b_2		/* mul_add_c(a[6],b[2],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1121,7 +1132,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_5,b_3		/* mul_add_c(a[5],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1176,6 +1188,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_3,b_6		/* mul_add_c(a[3],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1183,7 +1196,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_4,b_5		/* mul_add_c(a[4],b[5],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1229,6 +1243,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_6,b_4		/* mul_add_c(a[6],b[4],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1236,7 +1251,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_5,b_5		/* mul_add_c(a[5],b[5],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1273,6 +1289,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_5,b_6		/* mul_add_c(a[5],b[6],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1280,7 +1297,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_6,b_5		/* mul_add_c(a[6],b[5],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1308,6 +1326,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_6,b_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1315,7 +1334,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_5,b_7		/* mul_add_c(a[5],b[7],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1334,6 +1354,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_7,b_6		/* mul_add_c(a[7],b[6],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1341,7 +1362,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	sd	c_2,104(a0)	/* r[13]=c2; */
 
 	dmultu	a_7,b_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
@@ -1430,6 +1452,7 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1437,7 +1460,8 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1465,6 +1489,7 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1472,7 +1497,8 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_1,b_3		/* mul_add_c(a[1],b[3],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1491,6 +1517,7 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_3,b_2		/* mul_add_c(a[3],b[2],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1498,7 +1525,8 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	sd	c_3,40(a0)
 
 	dmultu	a_3,b_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
@@ -1543,28 +1571,30 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	c_3,t_2,AT
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
 	sd	c_2,8(a0)
 
 	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1579,24 +1609,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_1,a_2		/* mul_add_c2(a[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1608,24 +1640,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_0		/* mul_add_c2(a[4],b[0],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1646,24 +1680,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_5		/* mul_add_c2(a[0],b[5],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_1,a_4		/* mul_add_c2(a[1],b[4],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1673,12 +1709,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1690,24 +1726,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_6,a_0		/* mul_add_c2(a[6],b[0],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_5,a_1		/* mul_add_c2(a[5],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1717,12 +1755,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_2		/* mul_add_c2(a[4],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1743,24 +1781,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_7		/* mul_add_c2(a[0],b[7],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_1,a_6		/* mul_add_c2(a[1],b[6],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1770,12 +1810,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_2,a_5		/* mul_add_c2(a[2],b[5],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1785,12 +1825,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_3,a_4		/* mul_add_c2(a[3],b[4],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1802,24 +1842,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_7,a_1		/* mul_add_c2(a[7],b[1],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_6,a_2		/* mul_add_c2(a[6],b[2],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1829,12 +1871,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_5,a_3		/* mul_add_c2(a[5],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1855,24 +1897,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_2,a_7		/* mul_add_c2(a[2],b[7],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_3,a_6		/* mul_add_c2(a[3],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1882,12 +1926,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_5		/* mul_add_c2(a[4],b[5],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1899,24 +1943,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_7,a_3		/* mul_add_c2(a[7],b[3],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_6,a_4		/* mul_add_c2(a[6],b[4],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1937,24 +1983,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_7		/* mul_add_c2(a[4],b[7],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_5,a_6		/* mul_add_c2(a[5],b[6],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1966,15 +2014,17 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_7,a_5		/* mul_add_c2(a[7],b[5],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_6,a_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1989,15 +2039,17 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_6,a_7		/* mul_add_c2(a[6],b[7],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	sd	c_2,104(a0)
 
 	dmultu	a_7,a_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
@@ -2028,28 +2080,30 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	c_3,t_2,AT
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
 	sd	c_2,8(a0)
 
 	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -2064,24 +2118,26 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_1,a_2		/* mul_add_c(a2[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -2093,15 +2149,17 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_2,a_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -2116,15 +2174,17 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	sd	c_3,40(a0)
 
 	dmultu	a_3,a_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */

crypto/bn/bn_div.c

@@ -238,6 +238,7 @@ int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor,
 		{
 		BN_ULONG q,l0;
 #if defined(BN_DIV3W) && !defined(NO_ASM)
+		BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG);
 		q=bn_div_3_words(wnump,d1,d0);
 #else
 		BN_ULONG n0,n1,rem=0;

crypto/bn/bn_exp.c

@@ -113,6 +113,13 @@
 #include <stdio.h>
 #include "cryptlib.h"
 #include "bn_lcl.h"
+#ifdef ATALLA
+# include <alloca.h>
+# include <atasi.h>
+# include <assert.h>
+# include <dlfcn.h>
+#endif
+
 
 #define TABLE_SIZE	32
 
@@ -176,6 +183,174 @@ err:
 	}
 
 
+#ifdef ATALLA
+
+/*
+ * This routine will dynamically check for the existance of an Atalla AXL-200
+ * SSL accelerator module.  If one is found, the variable
+ * asi_accelerator_present is set to 1 and the function pointers
+ * ptr_ASI_xxxxxx above will be initialized to corresponding ASI API calls.
+ */
+typedef int tfnASI_GetPerformanceStatistics(int reset_flag,
+					    unsigned int *ret_buf);
+typedef int tfnASI_GetHardwareConfig(long card_num, unsigned int *ret_buf);
+typedef int tfnASI_RSAPrivateKeyOpFn(RSAPrivateKey * rsaKey,
+				     unsigned char *output,
+				     unsigned char *input,
+				     unsigned int modulus_len);
+
+static tfnASI_GetHardwareConfig *ptr_ASI_GetHardwareConfig;
+static tfnASI_RSAPrivateKeyOpFn *ptr_ASI_RSAPrivateKeyOpFn;
+static tfnASI_GetPerformanceStatistics *ptr_ASI_GetPerformanceStatistics;
+static int asi_accelerator_present;
+static int tried_atalla;
+
+void atalla_initialize_accelerator_handle(void)
+	{
+	void *dl_handle;
+	int status;
+	unsigned int config_buf[1024]; 
+	static int tested;
+
+	if(tested)
+		return;
+
+	tested=1;
+
+	bzero((void *)config_buf, 1024);
+
+	/*
+	 * Check to see if the library is present on the system
+	 */
+	dl_handle = dlopen("atasi.so", RTLD_NOW);
+	if (dl_handle == (void *) NULL)
+		{
+/*		printf("atasi.so library is not present on the system\n");
+		printf("No HW acceleration available\n");*/
+		return;
+	        }
+
+	/*
+	 * The library is present.  Now we'll check to insure that the
+	 * LDM is up and running. First we'll get the address of the
+	 * function in the atasi library that we need to see if the
+	 * LDM is operating.
+	 */
+
+	ptr_ASI_GetHardwareConfig =
+	  (tfnASI_GetHardwareConfig *)dlsym(dl_handle,"ASI_GetHardwareConfig");
+
+	if (ptr_ASI_GetHardwareConfig)
+		{
+		/*
+		 * We found the call, now we'll get our config
+		 * status.  If we get a non 0 result, the LDM is not
+		 * running and we cannot use the Atalla ASI *
+		 * library.
+		 */
+		status = (*ptr_ASI_GetHardwareConfig)(0L, config_buf);
+		if (status != 0)
+			{
+			printf("atasi.so library is present but not initialized\n");
+			printf("No HW acceleration available\n");
+			return;
+			}    
+	        }
+	else
+		{
+/*		printf("We found the library, but not the function. Very Strange!\n");*/
+		return ;
+	      	}
+
+	/* 
+	 * It looks like we have acceleration capabilities.  Load up the
+	 * pointers to our ASI API calls.
+	 */
+	ptr_ASI_RSAPrivateKeyOpFn=
+	  (tfnASI_RSAPrivateKeyOpFn *)dlsym(dl_handle, "ASI_RSAPrivateKeyOpFn");
+	if (ptr_ASI_RSAPrivateKeyOpFn == NULL)
+		{
+/*		printf("We found the library, but no RSA function. Very Strange!\n");*/
+		return;
+	        }
+
+	ptr_ASI_GetPerformanceStatistics =
+	  (tfnASI_GetPerformanceStatistics *)dlsym(dl_handle, "ASI_GetPerformanceStatistics");
+	if (ptr_ASI_GetPerformanceStatistics == NULL)
+		{
+/*		printf("We found the library, but no stat function. Very Strange!\n");*/
+		return;
+	      }
+
+	/*
+	 * Indicate that acceleration is available
+	 */
+	asi_accelerator_present = 1;
+
+/*	printf("This system has acceleration!\n");*/
+
+	return;
+	}
+
+/* make sure this only gets called once when bn_mod_exp calls bn_mod_exp_mont */
+int BN_mod_exp_atalla(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m)
+	{
+	unsigned char *abin;
+	unsigned char *pbin;
+	unsigned char *mbin;
+	unsigned char *rbin;
+	int an,pn,mn,ret;
+	RSAPrivateKey keydata;
+
+	atalla_initialize_accelerator_handle();
+	if(!asi_accelerator_present)
+		return 0;
+
+
+/* We should be able to run without size testing */
+# define ASIZE	128
+	an=BN_num_bytes(a);
+	pn=BN_num_bytes(p);
+	mn=BN_num_bytes(m);
+
+	if(an <= ASIZE && pn <= ASIZE && mn <= ASIZE)
+	    {
+	    int size=mn;
+
+	    assert(an <= mn);
+	    abin=alloca(size);
+	    memset(abin,'\0',mn);
+	    BN_bn2bin(a,abin+size-an);
+
+	    pbin=alloca(pn);
+	    BN_bn2bin(p,pbin);
+
+	    mbin=alloca(size);
+	    memset(mbin,'\0',mn);
+	    BN_bn2bin(m,mbin+size-mn);
+
+	    rbin=alloca(size);
+
+	    memset(&keydata,'\0',sizeof keydata);
+	    keydata.privateExponent.data=pbin;
+	    keydata.privateExponent.len=pn;
+	    keydata.modulus.data=mbin;
+	    keydata.modulus.len=size;
+
+	    ret=(*ptr_ASI_RSAPrivateKeyOpFn)(&keydata,rbin,abin,keydata.modulus.len);
+/*fprintf(stderr,"!%s\n",BN_bn2hex(a));*/
+	    if(!ret)
+	        {
+		BN_bin2bn(rbin,keydata.modulus.len,r);
+/*fprintf(stderr,"?%s\n",BN_bn2hex(r));*/
+		return 1;
+	        }
+	    }
+	return 0;
+        }
+#endif /* def ATALLA */
+
+
 int BN_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
 	       BN_CTX *ctx)
 	{
@@ -185,6 +360,13 @@ int BN_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
 	bn_check_top(p);
 	bn_check_top(m);
 
+#ifdef ATALLA
+	if(BN_mod_exp_atalla(r,a,p,m))
+	    return 1;
+/* If it fails, try the other methods (but don't try atalla again) */
+	tried_atalla=1;
+#endif
+
 #ifdef MONT_MUL_MOD
 	/* I have finally been able to take out this pre-condition of
 	 * the top bit being set.  It was caused by an error in BN_div
@@ -210,6 +392,10 @@ int BN_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
 		{ ret=BN_mod_exp_simple(r,a,p,m,ctx); }
 #endif
 
+#ifdef ATALLA
+	tried_atalla=0;
+#endif
+
 	return(ret);
 	}
 
@@ -339,6 +525,12 @@ int BN_mod_exp_mont(BIGNUM *rr, BIGNUM *a, const BIGNUM *p,
 	bn_check_top(p);
 	bn_check_top(m);
 
+#ifdef ATALLA
+	if(!tried_atalla && BN_mod_exp_atalla(rr,a,p,m))
+	    return 1;
+/* If it fails, try the other methods */
+#endif
+
 	if (!(m->d[0] & 1))
 		{
 		BNerr(BN_F_BN_MOD_EXP_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
@@ -501,6 +693,19 @@ int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
 	t = BN_CTX_get(ctx);
 	if (d == NULL || r == NULL || t == NULL) goto err;
 
+#ifdef ATALLA
+	if (!tried_atalla)
+		{
+		BN_set_word(t, a);
+		if (BN_mod_exp_atalla(rr, t, p, m))
+			{
+			BN_CTX_end(ctx);
+			return 1;
+			}
+		}
+/* If it fails, try the other methods */
+#endif
+
 	if (in_mont != NULL)
 		mont=in_mont;
 	else

crypto/cryptlib.c

@@ -100,8 +100,7 @@ static const char* lock_names[CRYPTO_NUM_LOCKS] =
 	"debug_malloc2",
 	"dso",
 	"dynlock",
-	"engine",
-#if CRYPTO_NUM_LOCKS != 29
+#if CRYPTO_NUM_LOCKS != 28
 # error "Inconsistency between crypto.h and cryptlib.c"
 #endif
 	};
@@ -241,7 +240,7 @@ void CRYPTO_destroy_dynlockid(int i)
 			}
 		else
 #endif
-			if (--(pointer->references) <= 0)
+			if (pointer->references <= 0)
 				{
 				sk_CRYPTO_dynlock_set(dyn_locks, i, NULL);
 				}
@@ -400,7 +399,7 @@ void CRYPTO_lock(int mode, int type, const char *file, int line)
 		struct CRYPTO_dynlock_value *pointer
 			= CRYPTO_get_dynlock_value(i);
 
-		if (pointer)
+		if (pointer && dynlock_lock_callback)
 			{
 			dynlock_lock_callback(mode, pointer, file, line);
 			}
@@ -431,7 +430,6 @@ int CRYPTO_add_lock(int *pointer, int amount, int type, const char *file,
 			CRYPTO_get_lock_name(type),
 			file,line);
 #endif
-		*pointer=ret;
 		}
 	else
 		{

crypto/crypto-lib.com

@@ -88,7 +88,7 @@ $! Define The Different Encryption Types.
 $!
 $ ENCRYPT_TYPES = "Basic,MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ -
 		  "DES,RC2,RC4,RC5,IDEA,BF,CAST,"+ -
-		  "BN,RSA,DSA,DH,DSO,ENGINE,"+ -
+		  "BN,RSA,DSA,DH,DSO,"+ -
 		  "BUFFER,BIO,STACK,LHASH,RAND,ERR,OBJECTS,"+ -
 		  "EVP,EVP_2,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
 		  "CONF,TXT_DB,PKCS7,PKCS12,COMP"
@@ -174,7 +174,7 @@ $!
 $ APPS_DES = "DES/DES,CBC3_ENC"
 $ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
 $
-$ LIB_ = "cryptlib,mem,mem_dbg,cversion,ex_data,tmdiff,cpt_err"
+$ LIB_ = "cryptlib,mem,mem_dbg,cversion,ex_data,tmdiff,cpt_err,ebcdic,uid"
 $ LIB_MD2 = "md2_dgst,md2_one"
 $ LIB_MD4 = "md4_dgst,md4_one"
 $ LIB_MD5 = "md5_dgst,md5_one"
@@ -206,8 +206,6 @@ $ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,dsa_err,dsa_ossl"
 $ LIB_DH = "dh_gen,dh_key,dh_lib,dh_check,dh_err"
 $ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
 	"dso_openssl,dso_win32,dso_vms"
-$ LIB_ENGINE = "engine_err,engine_lib,engine_list,engine_openssl,"+ -
-	"hw_atalla,hw_cswift,hw_ncipher"
 $ LIB_BUFFER = "buffer,buf_err"
 $ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
 	"bss_mem,bss_null,bss_fd,"+ -
@@ -1196,9 +1194,7 @@ $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
-           "/NOLIST/PREFIX=ALL" + -
-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
-	   CCEXTRAFLAGS
+           "/NOLIST/PREFIX=ALL/INCLUDE=SYS$DISK:[]" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
@@ -1230,8 +1226,7 @@ $	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST/INCLUDE=SYS$DISK:[]" + -
 	   CCEXTRAFLAGS
 $     CCDEFS = """VAXC""," + CCDEFS
 $!
@@ -1263,8 +1258,7 @@ $!
 $!    Use GNU C...
 $!
 $     CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
-	   CCEXTRAFLAGS
+	   "/INCLUDE=SYS$DISK:[]" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!

crypto/crypto.h

@@ -122,8 +122,7 @@ extern "C" {
 #define	CRYPTO_LOCK_MALLOC2		25
 #define	CRYPTO_LOCK_DSO			26
 #define	CRYPTO_LOCK_DYNLOCK		27
-#define	CRYPTO_LOCK_ENGINE		28
-#define	CRYPTO_NUM_LOCKS		29
+#define	CRYPTO_NUM_LOCKS		28
 
 #define CRYPTO_LOCK		1
 #define CRYPTO_UNLOCK		2

crypto/des/asm/des-586.pl

@@ -20,11 +20,11 @@ $L="edi";
 $R="esi";
 
 &external_label("des_SPtrans");
-&des_encrypt("des_encrypt",1);
+&des_encrypt("des_encrypt1",1);
 &des_encrypt("des_encrypt2",0);
 &des_encrypt3("des_encrypt3",1);
 &des_encrypt3("des_decrypt3",0);
-&cbc("des_ncbc_encrypt","des_encrypt","des_encrypt",0,4,5,3,5,-1);
+&cbc("des_ncbc_encrypt","des_encrypt1","des_encrypt1",0,4,5,3,5,-1);
 &cbc("des_ede3_cbc_encrypt","des_encrypt3","des_decrypt3",0,6,7,3,4,5);
 
 &asm_finish();

crypto/des/asm/des686.pl

@@ -46,7 +46,7 @@ EOF
 $L="edi";
 $R="esi";
 
-&des_encrypt("des_encrypt",1);
+&des_encrypt("des_encrypt1",1);
 &des_encrypt("des_encrypt2",0);
 
 &des_encrypt3("des_encrypt3",1);

crypto/des/asm/readme

@@ -8,7 +8,7 @@ assembler for the inner DES routines in libdes :-).
 
 The file to implement in assembler is des_enc.c.  Replace the following
 4 functions
-des_encrypt(DES_LONG data[2],des_key_schedule ks, int encrypt);
+des_encrypt1(DES_LONG data[2],des_key_schedule ks, int encrypt);
 des_encrypt2(DES_LONG data[2],des_key_schedule ks, int encrypt);
 des_encrypt3(DES_LONG data[2],des_key_schedule ks1,ks2,ks3);
 des_decrypt3(DES_LONG data[2],des_key_schedule ks1,ks2,ks3);

crypto/des/cbc_cksm.c

@@ -82,7 +82,7 @@ DES_LONG des_cbc_cksum(const unsigned char *in, des_cblock *output,
 			
 		tin0^=tout0; tin[0]=tin0;
 		tin1^=tout1; tin[1]=tin1;
-		des_encrypt((DES_LONG *)tin,schedule,DES_ENCRYPT);
+		des_encrypt1((DES_LONG *)tin,schedule,DES_ENCRYPT);
 		/* fix 15/10/91 eay - thanks to keithr@sco.COM */
 		tout0=tin[0];
 		tout1=tin[1];

crypto/des/cfb64enc.c

@@ -82,7 +82,7 @@ void des_cfb64_encrypt(const unsigned char *in, unsigned char *out,
 				{
 				c2l(iv,v0); ti[0]=v0;
 				c2l(iv,v1); ti[1]=v1;
-				des_encrypt(ti,schedule,DES_ENCRYPT);
+				des_encrypt1(ti,schedule,DES_ENCRYPT);
 				iv = &(*ivec)[0];
 				v0=ti[0]; l2c(v0,iv);
 				v0=ti[1]; l2c(v0,iv);
@@ -102,7 +102,7 @@ void des_cfb64_encrypt(const unsigned char *in, unsigned char *out,
 				{
 				c2l(iv,v0); ti[0]=v0;
 				c2l(iv,v1); ti[1]=v1;
-				des_encrypt(ti,schedule,DES_ENCRYPT);
+				des_encrypt1(ti,schedule,DES_ENCRYPT);
 				iv = &(*ivec)[0];
 				v0=ti[0]; l2c(v0,iv);
 				v0=ti[1]; l2c(v0,iv);

crypto/des/cfb_enc.c

@@ -100,7 +100,7 @@ void des_cfb_encrypt(const unsigned char *in, unsigned char *out, int numbits,
 			l-=n;
 			ti[0]=v0;
 			ti[1]=v1;
-			des_encrypt((DES_LONG *)ti,schedule,DES_ENCRYPT);
+			des_encrypt1((DES_LONG *)ti,schedule,DES_ENCRYPT);
 			c2ln(in,d0,d1,n);
 			in+=n;
 			d0=(d0^ti[0])&mask0;
@@ -132,7 +132,7 @@ void des_cfb_encrypt(const unsigned char *in, unsigned char *out, int numbits,
 			l-=n;
 			ti[0]=v0;
 			ti[1]=v1;
-			des_encrypt((DES_LONG *)ti,schedule,DES_ENCRYPT);
+			des_encrypt1((DES_LONG *)ti,schedule,DES_ENCRYPT);
 			c2ln(in,d0,d1,n);
 			in+=n;
 			/* 30-08-94 - eay - changed because l>>32 and

crypto/des/des.h

@@ -147,14 +147,14 @@ void des_ecb_encrypt(const_des_cblock *input,des_cblock *output,
 	Data is a pointer to 2 unsigned long's and ks is the
 	des_key_schedule to use.  enc, is non zero specifies encryption,
 	zero if decryption. */
-void des_encrypt(DES_LONG *data,des_key_schedule ks, int enc);
+void des_encrypt1(DES_LONG *data,des_key_schedule ks, int enc);
 
-/* 	This functions is the same as des_encrypt() except that the DES
+/* 	This functions is the same as des_encrypt1() except that the DES
 	initial permutation (IP) and final permutation (FP) have been left
-	out.  As for des_encrypt(), you should not use this function.
+	out.  As for des_encrypt1(), you should not use this function.
 	It is used by the routines in the library that implement triple DES.
 	IP() des_encrypt2() des_encrypt2() des_encrypt2() FP() is the same
-	as des_encrypt() des_encrypt() des_encrypt() except faster :-). */
+	as des_encrypt1() des_encrypt1() des_encrypt1() except faster :-). */
 void des_encrypt2(DES_LONG *data,des_key_schedule ks, int enc);
 
 void des_encrypt3(DES_LONG *data, des_key_schedule ks1,

crypto/des/des_enc.c

@@ -58,7 +58,7 @@
 
 #include "des_locl.h"
 
-void des_encrypt(DES_LONG *data, des_key_schedule ks, int enc)
+void des_encrypt1(DES_LONG *data, des_key_schedule ks, int enc)
 	{
 	register DES_LONG l,r,t,u;
 #ifdef DES_PTR

crypto/des/des_opts.c

@@ -118,7 +118,7 @@ extern void exit();
 #undef DES_RISC2
 #undef DES_PTR
 #undef D_ENCRYPT
-#define des_encrypt  des_encrypt_u4_cisc_idx
+#define des_encrypt1 des_encrypt_u4_cisc_idx
 #define des_encrypt2 des_encrypt2_u4_cisc_idx
 #define des_encrypt3 des_encrypt3_u4_cisc_idx
 #define des_decrypt3 des_decrypt3_u4_cisc_idx
@@ -130,11 +130,11 @@ extern void exit();
 #undef DES_RISC2
 #undef DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u16_cisc_idx
+#define des_encrypt1 des_encrypt_u16_cisc_idx
 #define des_encrypt2 des_encrypt2_u16_cisc_idx
 #define des_encrypt3 des_encrypt3_u16_cisc_idx
 #define des_decrypt3 des_decrypt3_u16_cisc_idx
@@ -146,11 +146,11 @@ extern void exit();
 #undef DES_RISC2
 #undef DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u4_risc1_idx
+#define des_encrypt1 des_encrypt_u4_risc1_idx
 #define des_encrypt2 des_encrypt2_u4_risc1_idx
 #define des_encrypt3 des_encrypt3_u4_risc1_idx
 #define des_decrypt3 des_decrypt3_u4_risc1_idx
@@ -166,11 +166,11 @@ extern void exit();
 #define DES_RISC2
 #undef DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u4_risc2_idx
+#define des_encrypt1 des_encrypt_u4_risc2_idx
 #define des_encrypt2 des_encrypt2_u4_risc2_idx
 #define des_encrypt3 des_encrypt3_u4_risc2_idx
 #define des_decrypt3 des_decrypt3_u4_risc2_idx
@@ -182,11 +182,11 @@ extern void exit();
 #undef DES_RISC2
 #undef DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u16_risc1_idx
+#define des_encrypt1 des_encrypt_u16_risc1_idx
 #define des_encrypt2 des_encrypt2_u16_risc1_idx
 #define des_encrypt3 des_encrypt3_u16_risc1_idx
 #define des_decrypt3 des_decrypt3_u16_risc1_idx
@@ -198,11 +198,11 @@ extern void exit();
 #define DES_RISC2
 #undef DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u16_risc2_idx
+#define des_encrypt1 des_encrypt_u16_risc2_idx
 #define des_encrypt2 des_encrypt2_u16_risc2_idx
 #define des_encrypt3 des_encrypt3_u16_risc2_idx
 #define des_decrypt3 des_decrypt3_u16_risc2_idx
@@ -218,11 +218,11 @@ extern void exit();
 #undef DES_RISC2
 #define DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u4_cisc_ptr
+#define des_encrypt1 des_encrypt_u4_cisc_ptr
 #define des_encrypt2 des_encrypt2_u4_cisc_ptr
 #define des_encrypt3 des_encrypt3_u4_cisc_ptr
 #define des_decrypt3 des_decrypt3_u4_cisc_ptr
@@ -234,11 +234,11 @@ extern void exit();
 #undef DES_RISC2
 #define DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u16_cisc_ptr
+#define des_encrypt1 des_encrypt_u16_cisc_ptr
 #define des_encrypt2 des_encrypt2_u16_cisc_ptr
 #define des_encrypt3 des_encrypt3_u16_cisc_ptr
 #define des_decrypt3 des_decrypt3_u16_cisc_ptr
@@ -250,11 +250,11 @@ extern void exit();
 #undef DES_RISC2
 #define DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u4_risc1_ptr
+#define des_encrypt1 des_encrypt_u4_risc1_ptr
 #define des_encrypt2 des_encrypt2_u4_risc1_ptr
 #define des_encrypt3 des_encrypt3_u4_risc1_ptr
 #define des_decrypt3 des_decrypt3_u4_risc1_ptr
@@ -270,11 +270,11 @@ extern void exit();
 #define DES_RISC2
 #define DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u4_risc2_ptr
+#define des_encrypt1 des_encrypt_u4_risc2_ptr
 #define des_encrypt2 des_encrypt2_u4_risc2_ptr
 #define des_encrypt3 des_encrypt3_u4_risc2_ptr
 #define des_decrypt3 des_decrypt3_u4_risc2_ptr
@@ -286,11 +286,11 @@ extern void exit();
 #undef DES_RISC2
 #define DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u16_risc1_ptr
+#define des_encrypt1 des_encrypt_u16_risc1_ptr
 #define des_encrypt2 des_encrypt2_u16_risc1_ptr
 #define des_encrypt3 des_encrypt3_u16_risc1_ptr
 #define des_decrypt3 des_decrypt3_u16_risc1_ptr
@@ -302,11 +302,11 @@ extern void exit();
 #define DES_RISC2
 #define DES_PTR
 #undef D_ENCRYPT
-#undef des_encrypt
+#undef des_encrypt1
 #undef des_encrypt2
 #undef des_encrypt3
 #undef des_decrypt3
-#define des_encrypt  des_encrypt_u16_risc2_ptr
+#define des_encrypt1 des_encrypt_u16_risc2_ptr
 #define des_encrypt2 des_encrypt2_u16_risc2_ptr
 #define des_encrypt3 des_encrypt3_u16_risc2_ptr
 #define des_decrypt3 des_decrypt3_u16_risc2_ptr
@@ -453,7 +453,7 @@ int main(int argc, char **argv)
 		count*=2;
 		Time_F(START);
 		for (i=count; i; i--)
-			des_encrypt(data,&(sch[0]),DES_ENCRYPT);
+			des_encrypt1(data,&(sch[0]),DES_ENCRYPT);
 		d=Time_F(STOP);
 		} while (d < 3.0);
 	ca=count;

crypto/des/dess.cpp

@@ -45,19 +45,19 @@ void main(int argc,char *argv[])
 		{
 		for (i=0; i<1000; i++) /**/
 			{
-			des_encrypt(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
 			GetTSC(s1);
-			des_encrypt(&data[0],key,1);
-			des_encrypt(&data[0],key,1);
-			des_encrypt(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
 			GetTSC(e1);
 			GetTSC(s2);
-			des_encrypt(&data[0],key,1);
-			des_encrypt(&data[0],key,1);
-			des_encrypt(&data[0],key,1);
-			des_encrypt(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
 			GetTSC(e2);
-			des_encrypt(&data[0],key,1);
+			des_encrypt1(&data[0],key,1);
 			}
 
 		printf("des %d %d (%d)\n",

crypto/des/ecb_enc.c

@@ -114,7 +114,7 @@ void des_ecb_encrypt(const_des_cblock *input, des_cblock *output,
 
 	c2l(in,l); ll[0]=l;
 	c2l(in,l); ll[1]=l;
-	des_encrypt(ll,ks,enc);
+	des_encrypt1(ll,ks,enc);
 	l=ll[0]; l2c(l,out);
 	l=ll[1]; l2c(l,out);
 	l=ll[0]=ll[1]=0;

crypto/des/ede_cbcm_enc.c

@@ -95,7 +95,7 @@ void des_ede3_cbcm_encrypt(const unsigned char *in, unsigned char *out,
 	    {
 	    tin[0]=m0;
 	    tin[1]=m1;
-	    des_encrypt(tin,ks3,1);
+	    des_encrypt1(tin,ks3,1);
 	    m0=tin[0];
 	    m1=tin[1];
 
@@ -113,13 +113,13 @@ void des_ede3_cbcm_encrypt(const unsigned char *in, unsigned char *out,
 
 	    tin[0]=tin0;
 	    tin[1]=tin1;
-	    des_encrypt(tin,ks1,1);
+	    des_encrypt1(tin,ks1,1);
 	    tin[0]^=m0;
 	    tin[1]^=m1;
-	    des_encrypt(tin,ks2,0);
+	    des_encrypt1(tin,ks2,0);
 	    tin[0]^=m0;
 	    tin[1]^=m1;
-	    des_encrypt(tin,ks1,1);
+	    des_encrypt1(tin,ks1,1);
 	    tout0=tin[0];
 	    tout1=tin[1];
 
@@ -146,7 +146,7 @@ void des_ede3_cbcm_encrypt(const unsigned char *in, unsigned char *out,
 	    {
 	    tin[0]=m0;
 	    tin[1]=m1;
-	    des_encrypt(tin,ks3,1);
+	    des_encrypt1(tin,ks3,1);
 	    m0=tin[0];
 	    m1=tin[1];
 
@@ -158,13 +158,13 @@ void des_ede3_cbcm_encrypt(const unsigned char *in, unsigned char *out,
 
 	    tin[0]=tin0;
 	    tin[1]=tin1;
-	    des_encrypt(tin,ks1,0);
+	    des_encrypt1(tin,ks1,0);
 	    tin[0]^=m0;
 	    tin[1]^=m1;
-	    des_encrypt(tin,ks2,1);
+	    des_encrypt1(tin,ks2,1);
 	    tin[0]^=m0;
 	    tin[1]^=m1;
-	    des_encrypt(tin,ks1,0);
+	    des_encrypt1(tin,ks1,0);
 	    tout0=tin[0];
 	    tout1=tin[1];
 

crypto/des/ncbc_enc.c

@@ -89,7 +89,7 @@ void des_ncbc_encrypt(const unsigned char *in, unsigned char *out, long length,
 			c2l(in,tin1);
 			tin0^=tout0; tin[0]=tin0;
 			tin1^=tout1; tin[1]=tin1;
-			des_encrypt((DES_LONG *)tin,schedule,DES_ENCRYPT);
+			des_encrypt1((DES_LONG *)tin,schedule,DES_ENCRYPT);
 			tout0=tin[0]; l2c(tout0,out);
 			tout1=tin[1]; l2c(tout1,out);
 			}
@@ -98,7 +98,7 @@ void des_ncbc_encrypt(const unsigned char *in, unsigned char *out, long length,
 			c2ln(in,tin0,tin1,l+8);
 			tin0^=tout0; tin[0]=tin0;
 			tin1^=tout1; tin[1]=tin1;
-			des_encrypt((DES_LONG *)tin,schedule,DES_ENCRYPT);
+			des_encrypt1((DES_LONG *)tin,schedule,DES_ENCRYPT);
 			tout0=tin[0]; l2c(tout0,out);
 			tout1=tin[1]; l2c(tout1,out);
 			}
@@ -116,7 +116,7 @@ void des_ncbc_encrypt(const unsigned char *in, unsigned char *out, long length,
 			{
 			c2l(in,tin0); tin[0]=tin0;
 			c2l(in,tin1); tin[1]=tin1;
-			des_encrypt((DES_LONG *)tin,schedule,DES_DECRYPT);
+			des_encrypt1((DES_LONG *)tin,schedule,DES_DECRYPT);
 			tout0=tin[0]^xor0;
 			tout1=tin[1]^xor1;
 			l2c(tout0,out);
@@ -128,7 +128,7 @@ void des_ncbc_encrypt(const unsigned char *in, unsigned char *out, long length,
 			{
 			c2l(in,tin0); tin[0]=tin0;
 			c2l(in,tin1); tin[1]=tin1;
-			des_encrypt((DES_LONG *)tin,schedule,DES_DECRYPT);
+			des_encrypt1((DES_LONG *)tin,schedule,DES_DECRYPT);
 			tout0=tin[0]^xor0;
 			tout1=tin[1]^xor1;
 			l2cn(tout0,tout1,out,l+8);

crypto/des/ofb64enc.c

@@ -87,7 +87,7 @@ void des_ofb64_encrypt(register const unsigned char *in,
 		{
 		if (n == 0)
 			{
-			des_encrypt(ti,schedule,DES_ENCRYPT);
+			des_encrypt1(ti,schedule,DES_ENCRYPT);
 			dp=d;
 			t=ti[0]; l2c(t,dp);
 			t=ti[1]; l2c(t,dp);

crypto/des/ofb_enc.c

@@ -101,7 +101,7 @@ void des_ofb_encrypt(const unsigned char *in, unsigned char *out, int numbits,
 		{
 		ti[0]=v0;
 		ti[1]=v1;
-		des_encrypt((DES_LONG *)ti,schedule,DES_ENCRYPT);
+		des_encrypt1((DES_LONG *)ti,schedule,DES_ENCRYPT);
 		vv0=ti[0];
 		vv1=ti[1];
 		c2ln(in,d0,d1,n);

crypto/des/pcbc_enc.c

@@ -85,7 +85,7 @@ void des_pcbc_encrypt(const unsigned char *input, unsigned char *output,
 				c2ln(in,sin0,sin1,length);
 			tin[0]=sin0^xor0;
 			tin[1]=sin1^xor1;
-			des_encrypt((DES_LONG *)tin,schedule,DES_ENCRYPT);
+			des_encrypt1((DES_LONG *)tin,schedule,DES_ENCRYPT);
 			tout0=tin[0];
 			tout1=tin[1];
 			xor0=sin0^tout0;
@@ -103,7 +103,7 @@ void des_pcbc_encrypt(const unsigned char *input, unsigned char *output,
 			c2l(in,sin1);
 			tin[0]=sin0;
 			tin[1]=sin1;
-			des_encrypt((DES_LONG *)tin,schedule,DES_DECRYPT);
+			des_encrypt1((DES_LONG *)tin,schedule,DES_DECRYPT);
 			tout0=tin[0]^xor0;
 			tout1=tin[1]^xor1;
 			if (length >= 8)

crypto/des/speed.c

@@ -204,7 +204,7 @@ int main(int argc, char **argv)
 		count*=2;
 		Time_F(START);
 		for (i=count; i; i--)
-			des_encrypt(data,&(sch[0]),DES_ENCRYPT);
+			des_encrypt1(data,&(sch[0]),DES_ENCRYPT);
 		d=Time_F(STOP);
 		} while (d < 3.0);
 	ca=count;
@@ -241,7 +241,7 @@ int main(int argc, char **argv)
 		{
 		DES_LONG data[2];
 
-		des_encrypt(data,&(sch[0]),DES_ENCRYPT);
+		des_encrypt1(data,&(sch[0]),DES_ENCRYPT);
 		}
 	d=Time_F(STOP);
 	printf("%ld des_encrypt's in %.2f second\n",count,d);

crypto/des/xcbc_enc.c

@@ -138,7 +138,7 @@ void des_xcbc_encrypt(const unsigned char *in, unsigned char *out,
 			c2l(in,tin1);
 			tin0^=tout0^inW0; tin[0]=tin0;
 			tin1^=tout1^inW1; tin[1]=tin1;
-			des_encrypt(tin,schedule,DES_ENCRYPT);
+			des_encrypt1(tin,schedule,DES_ENCRYPT);
 			tout0=tin[0]^outW0; l2c(tout0,out);
 			tout1=tin[1]^outW1; l2c(tout1,out);
 			}
@@ -147,7 +147,7 @@ void des_xcbc_encrypt(const unsigned char *in, unsigned char *out,
 			c2ln(in,tin0,tin1,l+8);
 			tin0^=tout0^inW0; tin[0]=tin0;
 			tin1^=tout1^inW1; tin[1]=tin1;
-			des_encrypt(tin,schedule,DES_ENCRYPT);
+			des_encrypt1(tin,schedule,DES_ENCRYPT);
 			tout0=tin[0]^outW0; l2c(tout0,out);
 			tout1=tin[1]^outW1; l2c(tout1,out);
 			}
@@ -163,7 +163,7 @@ void des_xcbc_encrypt(const unsigned char *in, unsigned char *out,
 			{
 			c2l(in,tin0); tin[0]=tin0^outW0;
 			c2l(in,tin1); tin[1]=tin1^outW1;
-			des_encrypt(tin,schedule,DES_DECRYPT);
+			des_encrypt1(tin,schedule,DES_DECRYPT);
 			tout0=tin[0]^xor0^inW0;
 			tout1=tin[1]^xor1^inW1;
 			l2c(tout0,out);
@@ -175,7 +175,7 @@ void des_xcbc_encrypt(const unsigned char *in, unsigned char *out,
 			{
 			c2l(in,tin0); tin[0]=tin0^outW0;
 			c2l(in,tin1); tin[1]=tin1^outW1;
-			des_encrypt(tin,schedule,DES_DECRYPT);
+			des_encrypt1(tin,schedule,DES_DECRYPT);
 			tout0=tin[0]^xor0^inW0;
 			tout1=tin[1]^xor1^inW1;
 			l2cn(tout0,tout1,out,l+8);

crypto/dh/Makefile.ssl

@@ -101,39 +101,19 @@ dh_gen.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 dh_gen.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
 dh_gen.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 dh_gen.o: ../cryptlib.h
-dh_key.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dh_key.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-dh_key.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-dh_key.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-dh_key.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-dh_key.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-dh_key.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-dh_key.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-dh_key.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-dh_key.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-dh_key.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-dh_key.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+dh_key.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
+dh_key.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
+dh_key.o: ../../include/openssl/dh.h ../../include/openssl/e_os.h
+dh_key.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+dh_key.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 dh_key.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dh_key.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-dh_key.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-dh_key.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-dh_key.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+dh_key.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 dh_key.o: ../../include/openssl/symhacks.h ../cryptlib.h
-dh_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dh_lib.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-dh_lib.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-dh_lib.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-dh_lib.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-dh_lib.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-dh_lib.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-dh_lib.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-dh_lib.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-dh_lib.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-dh_lib.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-dh_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-dh_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dh_lib.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-dh_lib.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-dh_lib.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-dh_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-dh_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h
+dh_lib.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
+dh_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
+dh_lib.o: ../../include/openssl/dh.h ../../include/openssl/e_os.h
+dh_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+dh_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
+dh_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
+dh_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+dh_lib.o: ../cryptlib.h

crypto/dh/dh.h

@@ -115,11 +115,7 @@ struct dh_st
 
 	int references;
 	CRYPTO_EX_DATA ex_data;
-#if 0
 	DH_METHOD *meth;
-#else
-	struct engine_st *engine;
-#endif
 	};
 
 #define DH_GENERATOR_2		2
@@ -154,15 +150,10 @@ struct dh_st
 
 DH_METHOD *DH_OpenSSL(void);
 
-void DH_set_default_openssl_method(DH_METHOD *meth);
-DH_METHOD *DH_get_default_openssl_method(void);
-#if 0
+void DH_set_default_method(DH_METHOD *meth);
+DH_METHOD *DH_get_default_method(void);
 DH_METHOD *DH_set_method(DH *dh, DH_METHOD *meth);
 DH *DH_new_method(DH_METHOD *meth);
-#else
-int DH_set_method(DH *dh, struct engine_st *engine);
-DH *DH_new_method(struct engine_st *engine);
-#endif
 
 DH *	DH_new(void);
 void	DH_free(DH *dh);

crypto/dh/dh_key.c

@@ -61,7 +61,6 @@
 #include <openssl/bn.h>
 #include <openssl/rand.h>
 #include <openssl/dh.h>
-#include <openssl/engine.h>
 
 static int generate_key(DH *dh);
 static int compute_key(unsigned char *key, BIGNUM *pub_key, DH *dh);
@@ -73,12 +72,12 @@ static int dh_finish(DH *dh);
 
 int DH_generate_key(DH *dh)
 	{
-	return ENGINE_get_DH(dh->engine)->generate_key(dh);
+	return dh->meth->generate_key(dh);
 	}
 
 int DH_compute_key(unsigned char *key, BIGNUM *pub_key, DH *dh)
 	{
-	return ENGINE_get_DH(dh->engine)->compute_key(key, pub_key, dh);
+	return dh->meth->compute_key(key, pub_key, dh);
 	}
 
 static DH_METHOD dh_ossl = {
@@ -133,9 +132,8 @@ static int generate_key(DH *dh)
 		}
 	mont=(BN_MONT_CTX *)dh->method_mont_p;
 
-	if (!ENGINE_get_DH(dh->engine)->bn_mod_exp(dh, pub_key, dh->g,
-				priv_key,dh->p,&ctx,mont))
-		goto err;
+	if (!dh->meth->bn_mod_exp(dh, pub_key,dh->g,priv_key,dh->p,&ctx,mont))
+								goto err;
 		
 	dh->pub_key=pub_key;
 	dh->priv_key=priv_key;
@@ -174,8 +172,7 @@ static int compute_key(unsigned char *key, BIGNUM *pub_key, DH *dh)
 		}
 
 	mont=(BN_MONT_CTX *)dh->method_mont_p;
-	if (!ENGINE_get_DH(dh->engine)->bn_mod_exp(dh, tmp, pub_key,
-				dh->priv_key,dh->p,&ctx,mont))
+	if (!dh->meth->bn_mod_exp(dh, tmp,pub_key,dh->priv_key,dh->p,&ctx,mont))
 		{
 		DHerr(DH_F_DH_COMPUTE_KEY,ERR_R_BN_LIB);
 		goto err;

crypto/dh/dh_lib.c

@@ -60,7 +60,6 @@
 #include "cryptlib.h"
 #include <openssl/bn.h>
 #include <openssl/dh.h>
-#include <openssl/engine.h>
 
 const char *DH_version="Diffie-Hellman" OPENSSL_VERSION_PTEXT;
 
@@ -68,32 +67,17 @@ static DH_METHOD *default_DH_method;
 static int dh_meth_num = 0;
 static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
 
-void DH_set_default_openssl_method(DH_METHOD *meth)
+void DH_set_default_method(DH_METHOD *meth)
 {
-	ENGINE *e;
-	/* We'll need to notify the "openssl" ENGINE of this
-	 * change too. We won't bother locking things down at
-	 * our end as there was never any locking in these
-	 * functions! */
-	if(default_DH_method != meth)
-		{
-		default_DH_method = meth;
-		e = ENGINE_by_id("openssl");
-		if(e)
-			{
-			ENGINE_set_DH(e, meth);
-			ENGINE_free(e);
-			}
-		}
+	default_DH_method = meth;
 }
 
-DH_METHOD *DH_get_default_openssl_method(void)
+DH_METHOD *DH_get_default_method(void)
 {
 	if(!default_DH_method) default_DH_method = DH_OpenSSL();
 	return default_DH_method;
 }
 
-#if 0
 DH_METHOD *DH_set_method(DH *dh, DH_METHOD *meth)
 {
         DH_METHOD *mtmp;
@@ -103,37 +87,14 @@ DH_METHOD *DH_set_method(DH *dh, DH_METHOD *meth)
         if (meth->init) meth->init(dh);
         return mtmp;
 }
-#else
-int DH_set_method(DH *dh, ENGINE *engine)
-{
-	ENGINE *mtmp;
-	DH_METHOD *meth;
-	mtmp = dh->engine;
-	meth = ENGINE_get_DH(mtmp);
-	if (!ENGINE_init(engine))
-		return 0;
-	if (meth->finish) meth->finish(dh);
-	dh->engine= engine;
-	meth = ENGINE_get_DH(engine);
-	if (meth->init) meth->init(dh);
-	/* SHOULD ERROR CHECK THIS!!! */
-	ENGINE_finish(mtmp);
-	return 1;
-}
-#endif
 
 DH *DH_new(void)
 {
 	return DH_new_method(NULL);
 }
 
-#if 0
 DH *DH_new_method(DH_METHOD *meth)
-#else
-DH *DH_new_method(ENGINE *engine)
-#endif
 	{
-	DH_METHOD *meth;
 	DH *ret;
 	ret=(DH *)OPENSSL_malloc(sizeof(DH));
 
@@ -142,17 +103,8 @@ DH *DH_new_method(ENGINE *engine)
 		DHerr(DH_F_DH_NEW,ERR_R_MALLOC_FAILURE);
 		return(NULL);
 		}
-	if(engine)
-		ret->engine = engine;
-	else
-		{
-		if((ret->engine=ENGINE_get_default_DH()) == NULL)
-			{
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		}
-	meth = ENGINE_get_DH(ret->engine);
+	if(meth) ret->meth = meth;
+	else ret->meth = DH_get_default_method();
 	ret->pad=0;
 	ret->version=0;
 	ret->p=NULL;
@@ -167,9 +119,9 @@ DH *DH_new_method(ENGINE *engine)
 	ret->counter = NULL;
 	ret->method_mont_p=NULL;
 	ret->references = 1;
-	ret->flags=meth->flags;
+	ret->flags=ret->meth->flags;
 	CRYPTO_new_ex_data(dh_meth,ret,&ret->ex_data);
-	if ((meth->init != NULL) && !meth->init(ret))
+	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
 		{
 		CRYPTO_free_ex_data(dh_meth,ret,&ret->ex_data);
 		OPENSSL_free(ret);
@@ -180,7 +132,6 @@ DH *DH_new_method(ENGINE *engine)
 
 void DH_free(DH *r)
 	{
-	DH_METHOD *meth;
 	int i;
 	if(r == NULL) return;
 	i = CRYPTO_add(&r->references, -1, CRYPTO_LOCK_DH);
@@ -196,9 +147,7 @@ void DH_free(DH *r)
 	}
 #endif
 
-	meth = ENGINE_get_DH(r->engine);
-	if(meth->finish) meth->finish(r);
-	ENGINE_finish(r->engine);
+	if(r->meth->finish) r->meth->finish(r);
 
 	CRYPTO_free_ex_data(dh_meth, r, &r->ex_data);
 

crypto/dsa/Makefile.ssl

@@ -116,75 +116,39 @@ dsa_key.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
 dsa_key.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
 dsa_key.o: ../../include/openssl/symhacks.h ../cryptlib.h
 dsa_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dsa_lib.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-dsa_lib.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-dsa_lib.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-dsa_lib.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-dsa_lib.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-dsa_lib.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-dsa_lib.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-dsa_lib.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-dsa_lib.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-dsa_lib.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-dsa_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-dsa_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dsa_lib.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-dsa_lib.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-dsa_lib.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-dsa_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-dsa_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h
+dsa_lib.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
+dsa_lib.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
+dsa_lib.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
+dsa_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+dsa_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
+dsa_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
+dsa_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+dsa_lib.o: ../cryptlib.h
 dsa_ossl.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dsa_ossl.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-dsa_ossl.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-dsa_ossl.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-dsa_ossl.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-dsa_ossl.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-dsa_ossl.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-dsa_ossl.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-dsa_ossl.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-dsa_ossl.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-dsa_ossl.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-dsa_ossl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+dsa_ossl.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
+dsa_ossl.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
+dsa_ossl.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
+dsa_ossl.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+dsa_ossl.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 dsa_ossl.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dsa_ossl.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-dsa_ossl.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-dsa_ossl.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-dsa_ossl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+dsa_ossl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 dsa_ossl.o: ../../include/openssl/symhacks.h ../cryptlib.h
 dsa_sign.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-dsa_sign.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-dsa_sign.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-dsa_sign.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-dsa_sign.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-dsa_sign.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-dsa_sign.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-dsa_sign.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-dsa_sign.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-dsa_sign.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-dsa_sign.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-dsa_sign.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+dsa_sign.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
+dsa_sign.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
+dsa_sign.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
+dsa_sign.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+dsa_sign.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 dsa_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-dsa_sign.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-dsa_sign.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-dsa_sign.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-dsa_sign.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+dsa_sign.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 dsa_sign.o: ../../include/openssl/symhacks.h ../cryptlib.h
 dsa_vrf.o: ../../include/openssl/asn1.h ../../include/openssl/asn1_mac.h
-dsa_vrf.o: ../../include/openssl/bio.h ../../include/openssl/blowfish.h
-dsa_vrf.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-dsa_vrf.o: ../../include/openssl/cast.h ../../include/openssl/crypto.h
-dsa_vrf.o: ../../include/openssl/des.h ../../include/openssl/dh.h
-dsa_vrf.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-dsa_vrf.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-dsa_vrf.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-dsa_vrf.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-dsa_vrf.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-dsa_vrf.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-dsa_vrf.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+dsa_vrf.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
+dsa_vrf.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
+dsa_vrf.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
+dsa_vrf.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+dsa_vrf.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
 dsa_vrf.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dsa_vrf.o: ../../include/openssl/rand.h ../../include/openssl/rc2.h
-dsa_vrf.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
-dsa_vrf.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
-dsa_vrf.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+dsa_vrf.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
 dsa_vrf.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 dsa_vrf.o: ../cryptlib.h

crypto/dsa/dsa.h

@@ -133,11 +133,7 @@ struct dsa_st
 	char *method_mont_p;
 	int references;
 	CRYPTO_EX_DATA ex_data;
-#if 0
 	DSA_METHOD *meth;
-#else
-	struct engine_st *engine;
-#endif
 	};
 
 #define DSAparams_dup(x) (DSA *)ASN1_dup((int (*)())i2d_DSAparams, \
@@ -163,20 +159,12 @@ int	DSA_do_verify(const unsigned char *dgst,int dgst_len,
 
 DSA_METHOD *DSA_OpenSSL(void);
 
-void        DSA_set_default_openssl_method(DSA_METHOD *);
-DSA_METHOD *DSA_get_default_openssl_method(void);
-#if 0
+void        DSA_set_default_method(DSA_METHOD *);
+DSA_METHOD *DSA_get_default_method(void);
 DSA_METHOD *DSA_set_method(DSA *dsa, DSA_METHOD *);
-#else
-int DSA_set_method(DSA *dsa, struct engine_st *engine);
-#endif
 
 DSA *	DSA_new(void);
-#if 0
 DSA *	DSA_new_method(DSA_METHOD *meth);
-#else
-DSA *	DSA_new_method(struct engine_st *engine);
-#endif
 int	DSA_size(DSA *);
 	/* next 4 return -1 on error */
 int	DSA_sign_setup( DSA *dsa,BN_CTX *ctx_in,BIGNUM **kinvp,BIGNUM **rp);
@@ -248,6 +236,7 @@ DH *DSA_dup_DH(DSA *r);
 
 /* Reason codes. */
 #define DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE		 100
+#define DSA_R_MISSING_PARAMETERS			 101
 
 #ifdef  __cplusplus
 }

crypto/dsa/dsa_err.c

@@ -85,6 +85,7 @@ static ERR_STRING_DATA DSA_str_functs[]=
 static ERR_STRING_DATA DSA_str_reasons[]=
 	{
 {DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE       ,"data too large for key size"},
+{DSA_R_MISSING_PARAMETERS                ,"missing parameters"},
 {0,NULL}
 	};
 

crypto/dsa/dsa_lib.c

@@ -63,7 +63,6 @@
 #include <openssl/bn.h>
 #include <openssl/dsa.h>
 #include <openssl/asn1.h>
-#include <openssl/engine.h>
 
 const char *DSA_version="DSA" OPENSSL_VERSION_PTEXT;
 
@@ -71,26 +70,12 @@ static DSA_METHOD *default_DSA_method;
 static int dsa_meth_num = 0;
 static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
 
-void DSA_set_default_openssl_method(DSA_METHOD *meth)
+void DSA_set_default_method(DSA_METHOD *meth)
 {
-	ENGINE *e;
-	/* We'll need to notify the "openssl" ENGINE of this
-	 * change too. We won't bother locking things down at
-	 * our end as there was never any locking in these
-	 * functions! */
-	if(default_DSA_method != meth)
-		{
-		default_DSA_method = meth;
-		e = ENGINE_by_id("openssl");
-		if(e)
-			{
-			ENGINE_set_DSA(e, meth);
-			ENGINE_free(e);
-			}
-		}
+	default_DSA_method = meth;
 }
 
-DSA_METHOD *DSA_get_default_openssl_method(void)
+DSA_METHOD *DSA_get_default_method(void)
 {
 	if(!default_DSA_method) default_DSA_method = DSA_OpenSSL();
 	return default_DSA_method;
@@ -101,7 +86,6 @@ DSA *DSA_new(void)
 	return DSA_new_method(NULL);
 }
 
-#if 0
 DSA_METHOD *DSA_set_method(DSA *dsa, DSA_METHOD *meth)
 {
         DSA_METHOD *mtmp;
@@ -111,33 +95,10 @@ DSA_METHOD *DSA_set_method(DSA *dsa, DSA_METHOD *meth)
         if (meth->init) meth->init(dsa);
         return mtmp;
 }
-#else
-int DSA_set_method(DSA *dsa, ENGINE *engine)
-	{
-	ENGINE *mtmp;
-	DSA_METHOD *meth;
-	mtmp = dsa->engine;
-	meth = ENGINE_get_DSA(mtmp);
-	if (!ENGINE_init(engine))
-		return 0;
-	if (meth->finish) meth->finish(dsa);
-	dsa->engine = engine;
-	meth = ENGINE_get_DSA(engine);
-	if (meth->init) meth->init(dsa);
-	/* SHOULD ERROR CHECK THIS!!! */
-	ENGINE_finish(mtmp);
-	return 1;
-	}
-#endif
 
 
-#if 0
 DSA *DSA_new_method(DSA_METHOD *meth)
-#else
-DSA *DSA_new_method(ENGINE *engine)
-#endif
 	{
-	DSA_METHOD *meth;
 	DSA *ret;
 
 	ret=(DSA *)OPENSSL_malloc(sizeof(DSA));
@@ -146,17 +107,8 @@ DSA *DSA_new_method(ENGINE *engine)
 		DSAerr(DSA_F_DSA_NEW,ERR_R_MALLOC_FAILURE);
 		return(NULL);
 		}
-	if(engine)
-		ret->engine = engine;
-	else
-		{
-		if((ret->engine=ENGINE_get_default_DSA()) == NULL)
-			{
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		}
-	meth = ENGINE_get_DSA(ret->engine);
+	if(meth) ret->meth = meth;
+	else ret->meth = DSA_get_default_method();
 	ret->pad=0;
 	ret->version=0;
 	ret->write_params=1;
@@ -172,9 +124,9 @@ DSA *DSA_new_method(ENGINE *engine)
 	ret->method_mont_p=NULL;
 
 	ret->references=1;
-	ret->flags=meth->flags;
+	ret->flags=ret->meth->flags;
 	CRYPTO_new_ex_data(dsa_meth,ret,&ret->ex_data);
-	if ((meth->init != NULL) && !meth->init(ret))
+	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
 		{
 		CRYPTO_free_ex_data(dsa_meth,ret,&ret->ex_data);
 		OPENSSL_free(ret);
@@ -186,7 +138,6 @@ DSA *DSA_new_method(ENGINE *engine)
 
 void DSA_free(DSA *r)
 	{
-	DSA_METHOD *meth;
 	int i;
 
 	if (r == NULL) return;
@@ -204,9 +155,7 @@ void DSA_free(DSA *r)
 		}
 #endif
 
-	meth = ENGINE_get_DSA(r->engine);
-	if(meth->finish) meth->finish(r);
-	ENGINE_finish(r->engine);
+	if(r->meth->finish) r->meth->finish(r);
 
 	CRYPTO_free_ex_data(dsa_meth, r, &r->ex_data);
 

crypto/dsa/dsa_ossl.c

@@ -64,7 +64,6 @@
 #include <openssl/dsa.h>
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
-#include <openssl/engine.h>
 
 static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa);
 static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp);
@@ -106,6 +105,11 @@ static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	int i,reason=ERR_R_BN_LIB;
 	DSA_SIG *ret=NULL;
 
+	if (!dsa->p || !dsa->q || !dsa->g)
+		{
+		reason=DSA_R_MISSING_PARAMETERS;
+		goto err;
+		}
 	BN_init(&m);
 	BN_init(&xr);
 	s=BN_new();
@@ -168,6 +172,11 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 	BIGNUM k,*kinv=NULL,*r=NULL;
 	int ret=0;
 
+	if (!dsa->p || !dsa->q || !dsa->g)
+		{
+		DSAerr(DSA_F_DSA_SIGN_SETUP,DSA_R_MISSING_PARAMETERS);
+		return 0;
+		}
 	if (ctx_in == NULL)
 		{
 		if ((ctx=BN_CTX_new()) == NULL) goto err;
@@ -192,7 +201,7 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 		}
 
 	/* Compute r = (g^k mod p) mod q */
-	if (!ENGINE_get_DSA(dsa->engine)->bn_mod_exp(dsa, r,dsa->g,&k,dsa->p,ctx,
+	if (!dsa->meth->bn_mod_exp(dsa, r,dsa->g,&k,dsa->p,ctx,
 		(BN_MONT_CTX *)dsa->method_mont_p)) goto err;
 	if (!BN_mod(r,r,dsa->q,ctx)) goto err;
 
@@ -231,6 +240,17 @@ static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 	BN_init(&u2);
 	BN_init(&t1);
 
+	if (BN_is_zero(sig->r) || sig->r->neg || BN_ucmp(sig->r, dsa->q) >= 0)
+		{
+		ret = 0;
+		goto err;
+		}
+	if (BN_is_zero(sig->s) || sig->s->neg || BN_ucmp(sig->s, dsa->q) >= 0)
+		{
+		ret = 0;
+		goto err;
+		}
+
 	/* Calculate W = inv(S) mod Q
 	 * save W in u2 */
 	if ((BN_mod_inverse(&u2,sig->s,dsa->q,ctx)) == NULL) goto err;
@@ -270,7 +290,7 @@ static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 	if (!BN_mod(&u1,&u1,dsa->q,ctx)) goto err;
 #else
 	{
-	if (!ENGINE_get_DSA(dsa->engine)->dsa_mod_exp(dsa, &t1,dsa->g,&u1,dsa->pub_key,&u2,
+	if (!dsa->meth->dsa_mod_exp(dsa, &t1,dsa->g,&u1,dsa->pub_key,&u2,
 						dsa->p,ctx,mont)) goto err;
 	/* BN_copy(&u1,&t1); */
 	/* let u1 = u1 mod q */

crypto/dsa/dsa_sign.c

@@ -64,11 +64,10 @@
 #include <openssl/dsa.h>
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
-#include <openssl/engine.h>
 
 DSA_SIG * DSA_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	{
-	return ENGINE_get_DSA(dsa->engine)->dsa_do_sign(dgst, dlen, dsa);
+	return dsa->meth->dsa_do_sign(dgst, dlen, dsa);
 	}
 
 int DSA_sign(int type, const unsigned char *dgst, int dlen, unsigned char *sig,
@@ -88,6 +87,6 @@ int DSA_sign(int type, const unsigned char *dgst, int dlen, unsigned char *sig,
 
 int DSA_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 	{
-	return ENGINE_get_DSA(dsa->engine)->dsa_sign_setup(dsa, ctx_in, kinvp, rp);
+	return dsa->meth->dsa_sign_setup(dsa, ctx_in, kinvp, rp);
 	}
 

crypto/dsa/dsa_vrf.c

@@ -65,12 +65,11 @@
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
 #include <openssl/asn1_mac.h>
-#include <openssl/engine.h>
 
 int DSA_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 		  DSA *dsa)
 	{
-	return ENGINE_get_DSA(dsa->engine)->dsa_do_verify(dgst, dgst_len, sig, dsa);
+	return dsa->meth->dsa_do_verify(dgst, dgst_len, sig, dsa);
 	}
 
 /* data has already been hashed (probably with SHA or SHA-1). */

crypto/dso/dso_dl.c

@@ -82,7 +82,7 @@ static int dl_unbind_func(DSO *dso, char *symname, DSO_FUNC_TYPE symptr);
 static int dl_init(DSO *dso);
 static int dl_finish(DSO *dso);
 #endif
-static int dl_ctrl(DSO *dso, int cmd, long larg, void *parg);
+static long dl_ctrl(DSO *dso, int cmd, long larg, void *parg);
 
 static DSO_METHOD dso_meth_dl = {
 	"OpenSSL 'dl' shared library method",
@@ -111,6 +111,11 @@ DSO_METHOD *DSO_METHOD_dl(void)
  * type so the cast is safe.
  */
 
+#if defined(__hpux)
+static const char extension[] = ".sl";
+#else
+static const char extension[] = ".so";
+#endif
 static int dl_load(DSO *dso, const char *filename)
 	{
 	shl_t ptr;
@@ -118,12 +123,12 @@ static int dl_load(DSO *dso, const char *filename)
 	int len;
 
 	/* The same comment as in dlfcn_load applies here. bleurgh. */
-	len = strlen(filename);
+	len = strlen(filename) + strlen(extension);
 	if((dso->flags & DSO_FLAG_NAME_TRANSLATION) &&
-			(len + 6 < DSO_MAX_TRANSLATED_SIZE) &&
+			(len + 3 < DSO_MAX_TRANSLATED_SIZE) &&
 			(strstr(filename, "/") == NULL))
 		{
-		sprintf(translated, "lib%s.so", filename);
+		sprintf(translated, "lib%s%s", filename, extension);
 		ptr = shl_load(translated, BIND_IMMEDIATE, NULL);
 		}
 	else
@@ -224,7 +229,7 @@ static DSO_FUNC_TYPE dl_bind_func(DSO *dso, const char *symname)
 	return((DSO_FUNC_TYPE)sym);
 	}
 
-static int dl_ctrl(DSO *dso, int cmd, long larg, void *parg)
+static long dl_ctrl(DSO *dso, int cmd, long larg, void *parg)
 	{
 	if(dso == NULL)
 		{
@@ -236,10 +241,10 @@ static int dl_ctrl(DSO *dso, int cmd, long larg, void *parg)
 	case DSO_CTRL_GET_FLAGS:
 		return dso->flags;
 	case DSO_CTRL_SET_FLAGS:
-		dso->flags = (int)larg;
+		dso->flags = larg;
 		return(0);
 	case DSO_CTRL_OR_FLAGS:
-		dso->flags |= (int)larg;
+		dso->flags |= larg;
 		return(0);
 	default:
 		break;

crypto/dso/dso_vms.c

@@ -62,7 +62,6 @@
 #ifdef VMS
 #pragma message disable DOLLARID
 #include <lib$routines.h>
-#include <libfisdef.h>
 #include <stsdef.h>
 #include <descrip.h>
 #include <starlet.h>
@@ -260,7 +259,8 @@ void vms_bind_sym(DSO *dso, const char *symname, void **sym)
 	{
 	DSO_VMS_INTERNAL *ptr;
 	int status;
-	int flags = LIB$M_FIS_MIXEDCASE;
+	int flags = (1<<4); /* LIB$M_FIS_MIXEDCASE, but this symbol isn't
+                               defined in VMS older than 7.0 or so */
 	struct dsc$descriptor_s symname_dsc;
 	*sym = NULL;
 

crypto/ebcdic.c

@@ -211,7 +211,7 @@ ascii2ebcdic(void *dest, const void *srce, size_t count)
 }
 
 #else /*CHARSET_EBCDIC*/
-#ifdef PEDANTIC
+#if defined(PEDANTIC) || defined(VMS) || defined(__VMS)
 static void *dummy=&dummy;
 #endif
 #endif

crypto/engine/.cvsignore

@@ -1,2 +0,0 @@
-lib
-Makefile.save

crypto/engine/Makefile.ssl

@@ -1,220 +0,0 @@
-#
-# OpenSSL/crypto/engine/Makefile
-#
-
-DIR=	engine
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I../../include
-CFLAG=-g
-INSTALL_PREFIX=
-OPENSSLDIR=     /usr/local/ssl
-INSTALLTOP=/usr/local/ssl
-MAKE=		make -f Makefile.ssl
-MAKEDEPEND=	$(TOP)/util/domd $(TOP)
-MAKEFILE=	Makefile.ssl
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST= enginetest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= engine_err.c engine_lib.c engine_list.c engine_openssl.c \
-	hw_atalla.c hw_cswift.c hw_ncipher.c
-LIBOBJ= engine_err.o engine_lib.o engine_list.o engine_openssl.o \
-	hw_atalla.o hw_cswift.o hw_ncipher.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= engine.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
-
-links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@for i in $(EXHEADER) ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-engine_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-engine_err.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-engine_err.o: ../../include/openssl/cast.h ../../include/openssl/crypto.h
-engine_err.o: ../../include/openssl/des.h ../../include/openssl/dh.h
-engine_err.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-engine_err.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-engine_err.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-engine_err.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-engine_err.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-engine_err.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-engine_err.o: ../../include/openssl/objects.h
-engine_err.o: ../../include/openssl/opensslconf.h
-engine_err.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-engine_err.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-engine_err.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-engine_err.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-engine_err.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-engine_err.o: ../../include/openssl/symhacks.h
-engine_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-engine_lib.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-engine_lib.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-engine_lib.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-engine_lib.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-engine_lib.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-engine_lib.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-engine_lib.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-engine_lib.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-engine_lib.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-engine_lib.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-engine_lib.o: ../../include/openssl/objects.h
-engine_lib.o: ../../include/openssl/opensslconf.h
-engine_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-engine_lib.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-engine_lib.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-engine_lib.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-engine_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-engine_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h engine_int.h
-engine_list.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-engine_list.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-engine_list.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-engine_list.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-engine_list.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-engine_list.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-engine_list.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-engine_list.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-engine_list.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-engine_list.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-engine_list.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-engine_list.o: ../../include/openssl/objects.h
-engine_list.o: ../../include/openssl/opensslconf.h
-engine_list.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-engine_list.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-engine_list.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-engine_list.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-engine_list.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-engine_list.o: ../../include/openssl/symhacks.h ../cryptlib.h engine_int.h
-engine_openssl.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-engine_openssl.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-engine_openssl.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-engine_openssl.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-engine_openssl.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-engine_openssl.o: ../../include/openssl/dso.h ../../include/openssl/e_os.h
-engine_openssl.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-engine_openssl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-engine_openssl.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-engine_openssl.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-engine_openssl.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-engine_openssl.o: ../../include/openssl/obj_mac.h
-engine_openssl.o: ../../include/openssl/objects.h
-engine_openssl.o: ../../include/openssl/opensslconf.h
-engine_openssl.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-engine_openssl.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-engine_openssl.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-engine_openssl.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-engine_openssl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-engine_openssl.o: ../../include/openssl/symhacks.h ../cryptlib.h engine_int.h
-hw_atalla.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-hw_atalla.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-hw_atalla.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-hw_atalla.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-hw_atalla.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-hw_atalla.o: ../../include/openssl/dso.h ../../include/openssl/e_os.h
-hw_atalla.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-hw_atalla.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-hw_atalla.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-hw_atalla.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-hw_atalla.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-hw_atalla.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-hw_atalla.o: ../../include/openssl/opensslconf.h
-hw_atalla.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-hw_atalla.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-hw_atalla.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-hw_atalla.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-hw_atalla.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-hw_atalla.o: ../../include/openssl/symhacks.h ../cryptlib.h engine_int.h
-hw_atalla.o: vendor_defns/atalla.h
-hw_cswift.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-hw_cswift.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-hw_cswift.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-hw_cswift.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-hw_cswift.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-hw_cswift.o: ../../include/openssl/dso.h ../../include/openssl/e_os.h
-hw_cswift.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-hw_cswift.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-hw_cswift.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-hw_cswift.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-hw_cswift.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-hw_cswift.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-hw_cswift.o: ../../include/openssl/opensslconf.h
-hw_cswift.o: ../../include/openssl/opensslv.h ../../include/openssl/rand.h
-hw_cswift.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-hw_cswift.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-hw_cswift.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-hw_cswift.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-hw_cswift.o: ../../include/openssl/symhacks.h ../cryptlib.h engine_int.h
-hw_cswift.o: vendor_defns/cswift.h
-hw_ncipher.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-hw_ncipher.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
-hw_ncipher.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-hw_ncipher.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-hw_ncipher.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-hw_ncipher.o: ../../include/openssl/dso.h ../../include/openssl/e_os.h
-hw_ncipher.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-hw_ncipher.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-hw_ncipher.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-hw_ncipher.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-hw_ncipher.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-hw_ncipher.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-hw_ncipher.o: ../../include/openssl/opensslconf.h
-hw_ncipher.o: ../../include/openssl/opensslv.h ../../include/openssl/pem.h
-hw_ncipher.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs7.h
-hw_ncipher.o: ../../include/openssl/rand.h ../../include/openssl/rc2.h
-hw_ncipher.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
-hw_ncipher.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
-hw_ncipher.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-hw_ncipher.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-hw_ncipher.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-hw_ncipher.o: ../cryptlib.h engine_int.h vendor_defns/hwcryptohook.h

crypto/engine/README

@@ -1,278 +0,0 @@
-NOTES, THOUGHTS, and EVERYTHING
--------------------------------
-
-(1) Concurrency and locking ... I made a change to the ENGINE_free code
-    because I spotted a potential hold-up in proceedings (doing too
-    much inside a lock including calling a callback), there may be
-    other bits like this. What do the speed/optimisation freaks think
-    of this aspect of the code and design? There's lots of locking for
-    manipulation functions and I need that to keep things nice and
-    solid, but this manipulation is mostly (de)initialisation, I would
-    think that most run-time locking is purely in the ENGINE_init and
-    ENGINE_finish calls that might be made when getting handles for
-    RSA (and friends') structures. These would be mostly reference
-    count operations as the functional references should always be 1
-    or greater at run-time to prevent init/deinit thrashing.
-
-(2) nCipher support, via the HWCryptoHook API, is now in the code.
-    Apparently this hasn't been tested too much yet, but it looks
-    good. :-) Atalla support has been added too, but shares a lot in
-    common with Ben's original hooks in bn_exp.c (although it has been
-    ENGINE-ified, and error handling wrapped around it) and it's also
-    had some low-volume testing, so it should be usable.
-
-(3) Of more concern, we need to work out (a) how to put together usable
-    RAND_METHODs for units that just have one "get n or less random
-    bytes" function, (b) we also need to determine how to hook the code
-    in crypto/rand/ to use the ENGINE defaults in a way similar to what
-    has been done in crypto/rsa/, crypto/dsa/, etc.
-
-(4) ENGINE should really grow to encompass more than 3 public key
-    algorithms and randomness gathering. The structure/data level of
-    the engine code is hidden from code outside the crypto/engine/
-    directory so change shouldn't be too viral. More important though
-    is how things should evolve ... this needs thought and discussion.
-
-
------------------------------------==*==-----------------------------------
-
-More notes 2000-08-01
----------------------
-
-Geoff Thorpe, who designed the engine part, wrote a pretty good description
-of the thoughts he had when he built it, good enough to include verbatim here
-(with his permission)					-- Richard Levitte
-
-
-Date: Tue, 1 Aug 2000 16:54:08 +0100 (BST)
-From: Geoff Thorpe
-Subject: Re: The thoughts to merge BRANCH_engine into the main trunk are
- emerging
-
-Hi there,
-
-I'm going to try and do some justice to this, but I'm a little short on
-time and the there is an endless amount that could be discussed on this
-subject. sigh ... please bear with me :-)
-
-> The changes in BRANCH_engine dig deep into the core of OpenSSL, for example
-> into the RSA and RAND routines, adding a level of indirection which is needed
-> to keep the abstraction, as far as I understand.  It would be a good thing if
-> those who do play with those things took a look at the changes that have been
-> done in the branch and say out loud how much (or hopefully little) we've made
-> fools of ourselves.
-
-The point here is that the code that has emerged in the BRANCH_engine
-branch was based on some initial requirements of mine that I went in and
-addressed, and Richard has picked up the ball and run with it too. It
-would be really useful to get some review of the approach we've taken, but
-first I think I need to describe as best I can the reasons behind what has
-been done so far, in particular what issues we have tried to address when
-doing this, and what issues we have intentionally (or necessarily) tried
-to avoid.
-
-methods, engines, and evps
---------------------------
-
-There has been some dicussion, particularly with Steve, about where this
-ENGINE stuff might fit into the conceptual picture as/when we start to
-abstract algorithms a little bit to make the library more extensible. In
-particular, it would desirable to have algorithms (symmetric, hash, pkc,
-etc) abstracted in some way that allows them to be just objects sitting in
-a list (or database) ... it'll just happen that the "DSA" object doesn't
-support encryption whereas the "RSA" object does. This requires a lot of
-consideration to begin to know how to tackle it; in particular how
-encapsulated should these things be? If the objects also understand their
-own ASN1 encodings and what-not, then it would for example be possible to
-add support for elliptic-curve DSA in as a new algorithm and automatically
-have ECC-DSA certificates supported in SSL applications. Possible, but not
-easy. :-)
-
-Whatever, it seems that the way to go (if I've grok'd Steve's comments on
-this in the past) is to amalgamate these things in EVP as is already done
-(I think) for ciphers or hashes (Steve, please correct/elaborate). I
-certainly think something should be done in this direction because right
-now we have different source directories, types, functions, and methods
-for each algorithm - even when conceptually they are very much different
-feathers of the same bird. (This is certainly all true for the public-key
-stuff, and may be partially true for the other parts.)
-
-ENGINE was *not* conceived as a way of solving this, far from it. Nor was
-it conceived as a way of replacing the various "***_METHOD"s. It was
-conceived as an abstraction of a sort of "virtual crypto device". If we
-lived in a world where "EVP_ALGO"s (or something like them) encapsulated
-particular algorithms like RSA,DSA,MD5,RC4,etc, and "***_METHOD"s
-encapsulated interfaces to algorithms (eg. some algo's might support a
-PKC_METHOD, a HASH_METHOD, or a CIPHER_METHOD, who knows?), then I would
-think that ENGINE would encapsulate an implementation of arbitrarily many
-of those algorithms - perhaps as alternatives to existing algorithms
-and/or perhaps as new previously unimplemented algorithms. An ENGINE could
-be used to contain an alternative software implementation, a wrapper for a
-hardware acceleration and/or key-management unit, a comms-wrapper for
-distributing cryptographic operations to remote machines, or any other
-"devices" your imagination can dream up.
-
-However, what has been done in the ENGINE branch so far is nothing more
-than starting to get our toes wet. I had a couple of self-imposed
-requirements when putting the initial abstraction together, and I may have
-already posed these in one form or another on the list, but briefly;
-
-   (i) only bother with public key algorithms for now, and maybe RAND too
-       (motivated by the need to get hardware support going and the fact
-       this was a comparitively easy subset to address to begin with).
-
-  (ii) don't change (if at all possible) the existing crypto code, ie. the
-       implementations, the way the ***_METHODs work, etc.
-
- (iii) ensure that if no function from the ENGINE code is ever called then
-       things work the way they always did, and there is no memory
-       allocation (otherwise the failure to cleanup would be a problem -
-       this is part of the reason no STACKs were used, the other part of
-       the reason being I found them inappropriate).
-
-  (iv) ensure that all the built-in crypto was encapsulated by one of
-       these "ENGINE"s and that this engine was automatically selected as
-       the default.
-
-   (v) provide the minimum hooking possible in the existing crypto code
-       so that global functions (eg. RSA_public_encrypt) do not need any
-       extra parameter, yet will use whatever the current default ENGINE
-       for that RSA key is, and that the default can be set "per-key"
-       and globally (new keys will assume the global default, and keys
-       without their own default will be operated on using the global
-       default). NB: Try and make (v) conflict as little as possible with
-       (ii). :-)
-
-  (vi) wrap the ENGINE code up in duct tape so you can't even see the
-       corners. Ie. expose no structures at all, just black-box pointers.
-
-   (v) maintain internally a list of ENGINEs on which a calling
-       application can iterate, interrogate, etc. Allow a calling
-       application to hook in new ENGINEs, remove ENGINEs from the list,
-       and enforce uniqueness within the global list of each ENGINE's
-       "unique id".
-
-  (vi) keep reference counts for everything - eg. this includes storing a
-       reference inside each RSA structure to the ENGINE that it uses.
-       This is freed when the RSA structure is destroyed, or has its
-       ENGINE explicitly changed. The net effect needs to be that at any
-       time, it is deterministic to know whether an ENGINE is in use or
-       can be safely removed (or unloaded in the case of the other type
-       of reference) without invalidating function pointers that may or
-       may not be used indavertently in the future. This was actually
-       one of the biggest problems to overcome in the existing OpenSSL
-       code - implementations had always been assumed to be ever-present,
-       so there was no trivial way to get round this.
-
- (vii) distinguish between structural references and functional
-       references.
-
-A *little* detail
------------------
-
-While my mind is on it; I'll illustrate the bit in item (vii). This idea
-turned out to be very handy - the ENGINEs themselves need to be operated
-on and manipulated simply as objects without necessarily trying to
-"enable" them for use. Eg. most host machines will not have the necessary
-hardware or software to support all the engines one might compile into
-OpenSSL, yet it needs to be possible to iterate across the ENGINEs,
-querying their names, properties, etc - all happening in a thread-safe
-manner that uses reference counts (if you imagine two threads iterating
-through a list and one thread removing the ENGINE the other is currently
-looking at - you can see the gotcha waiting to happen). For all of this,
-*structural references* are used and operate much like the other reference
-counts in OpenSSL.
-
-The other kind of reference count is for *functional* references - these
-indicate a reference on which the caller can actually assume the
-particular ENGINE to be initialised and usable to perform the operations
-it implements. Any increment or decrement of the functional reference
-count automatically invokes a corresponding change in the structural
-reference count, as it is fairly obvious that a functional reference is a
-restricted case of a structural reference. So struct_ref >= funct_ref at
-all times. NB: functional references are usually obtained by a call to
-ENGINE_init(), but can also be created implicitly by calls that require a
-new functional reference to be created, eg. ENGINE_set_default(). Either
-way the only time the underlying ENGINE's "init" function is really called
-is when the (functional) reference count increases to 1, similarly the
-underlying "finish" handler is only called as the count goes down to 0.
-The effect of this, for example, is that if you set the default ENGINE for
-RSA operations to be "cswift", then its functional reference count will
-already be at least 1 so the CryptoSwift shared-library and the card will
-stay loaded and initialised until such time as all RSA keys using the
-cswift ENGINE are changed or destroyed and the default ENGINE for RSA
-operations has been changed. This prevents repeated thrashing of init and
-finish handling if the count keeps getting down as far as zero.
-
-Otherwise, the way the ENGINE code has been put together I think pretty
-much reflects the above points. The reason for the ENGINE structure having
-individual RSA_METHOD, DSA_METHOD, etc pointers is simply that it was the
-easiest way to go about things for now, to hook it all into the raw
-RSA,DSA,etc code, and I was trying to the keep the structure invisible
-anyway so that the way this is internally managed could be easily changed
-later on when we start to work out what's to be done about these other
-abstractions.
-
-Down the line, if some EVP-based technique emerges for adequately
-encapsulating algorithms and all their various bits and pieces, then I can
-imagine that "ENGINE" would turn into a reference-counting database of
-these EVP things, of which the default "openssl" ENGINE would be the
-library's own object database of pre-built software implemented algorithms
-(and such). It would also be cool to see the idea of "METHOD"s detached
-from the algorithms themselves ... so RSA, DSA, ElGamal, etc can all
-expose essentially the same METHOD (aka interface), which would include
-any querying/flagging stuff to identify what the algorithm can/can't do,
-its name, and other stuff like max/min block sizes, key sizes, etc. This
-would result in ENGINE similarly detaching its internal database of
-algorithm implementations from the function definitions that return
-interfaces to them. I think ...
-
-As for DSOs etc. Well the DSO code is pretty handy (but could be made much
-more so) for loading vendor's driver-libraries and talking to them in some
-generic way, but right now there's still big problems associated with
-actually putting OpenSSL code (ie. new ENGINEs, or anything else for that
-matter) in dynamically loadable libraries. These problems won't go away in
-a hurry so I don't think we should expect to have any kind of
-shared-library extensions any time soon - but solving the problems is a
-good thing to aim for, and would as a side-effect probably help make
-OpenSSL more usable as a shared-library itself (looking at the things
-needed to do this will show you why).
-
-One of the problems is that if you look at any of the ENGINE
-implementations, eg. hw_cswift.c or hw_ncipher.c, you'll see how it needs
-a variety of functionality and definitions from various areas of OpenSSL,
-including crypto/bn/, crypto/err/, crypto/ itself (locking for example),
-crypto/dso/, crypto/engine/, crypto/rsa, etc etc etc. So if similar code
-were to be suctioned off into shared libraries, the shared libraries would
-either have to duplicate all the definitions and code and avoid loader
-conflicts, or OpenSSL would have to somehow expose all that functionality
-to the shared-library. If this isn't a big enough problem, the issue of
-binary compatibility will be - anyone writing Apache modules can tell you
-that (Ralf? Ben? :-). However, I don't think OpenSSL would need to be
-quite so forgiving as Apache should be, so OpenSSL could simply tell its
-version to the DSO and leave the DSO with the problem of deciding whether
-to proceed or bail out for fear of binary incompatibilities.
-
-Certainly one thing that would go a long way to addressing this is to
-embark on a bit of an opaqueness mission. I've set the ENGINE code up with
-this in mind - it's so draconian that even to declare your own ENGINE, you
-have to get the engine code to create the underlying ENGINE structure, and
-then feed in the new ENGINE's function/method pointers through various
-"set" functions. The more of the code that takes on such a black-box
-approach, the more of the code that will be (a) easy to expose to shared
-libraries that need it, and (b) easy to expose to applications wanting to
-use OpenSSL itself as a shared-library. From my own explorations in
-OpenSSL, the biggest leviathan I've seen that is a problem in this respect
-is the BIGNUM code. Trying to "expose" the bignum code through any kind of
-organised "METHODs", let alone do all the necessary bignum operations
-solely through functions rather than direct access to the structures and
-macros, will be a massive pain in the "r"s.
-
-Anyway, I'm done for now - hope it was readable. Thoughts?
-
-Cheers,
-Geoff
-
-
------------------------------------==*==-----------------------------------
-

crypto/engine/engine.h

@@ -1,398 +0,0 @@
-/* openssl/engine.h */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_ENGINE_H
-#define HEADER_ENGINE_H
-
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/dsa.h>
-#include <openssl/dh.h>
-#include <openssl/rand.h>
-#include <openssl/evp.h>
-#include <openssl/symhacks.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* These flags are used to control combinations of algorithm (methods)
- * by bitwise "OR"ing. */
-#define ENGINE_METHOD_RSA		(unsigned int)0x0001
-#define ENGINE_METHOD_DSA		(unsigned int)0x0002
-#define ENGINE_METHOD_DH		(unsigned int)0x0004
-#define ENGINE_METHOD_RAND		(unsigned int)0x0008
-#define ENGINE_METHOD_BN_MOD_EXP	(unsigned int)0x0010
-#define ENGINE_METHOD_BN_MOD_EXP_CRT	(unsigned int)0x0020
-/* Obvious all-or-nothing cases. */
-#define ENGINE_METHOD_ALL		(unsigned int)0xFFFF
-#define ENGINE_METHOD_NONE		(unsigned int)0x0000
-
-/* These flags are used to tell the ctrl function what should be done.
- * All command numbers are shared between all engines, even if some don't
- * make sense to some engines.  In such a case, they do nothing but return
- * the error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED. */
-#define ENGINE_CTRL_SET_LOGSTREAM		1
-#define ENGINE_CTRL_SET_PASSWORD_CALLBACK	2
-/* Flags specific to the nCipher "chil" engine */
-#define ENGINE_CTRL_CHIL_SET_FORKCHECK		100
-	/* Depending on the value of the (long)i argument, this sets or
-	 * unsets the SimpleForkCheck flag in the CHIL API to enable or
-	 * disable checking and workarounds for applications that fork().
-	 */
-#define ENGINE_CTRL_CHIL_NO_LOCKING		101
-	/* This prevents the initialisation function from providing mutex
-	 * callbacks to the nCipher library. */
-
-/* As we're missing a BIGNUM_METHOD, we need a couple of locally
- * defined function types that engines can implement. */
-
-#ifndef HEADER_ENGINE_INT_H
-/* mod_exp operation, calculates; r = a ^ p mod m
- * NB: ctx can be NULL, but if supplied, the implementation may use
- * it if it wishes. */
-typedef int (*BN_MOD_EXP)(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
-
-/* private key operation for RSA, provided seperately in case other
- * RSA implementations wish to use it. */
-typedef int (*BN_MOD_EXP_CRT)(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *q, const BIGNUM *dmp1, const BIGNUM *dmq1,
-		const BIGNUM *iqmp, BN_CTX *ctx);
-
-/* Generic function pointer */
-typedef void (*ENGINE_GEN_FUNC_PTR)();
-/* Generic function pointer taking no arguments */
-typedef void (*ENGINE_GEN_INT_FUNC_PTR)(void);
-/* Specific control function pointer */
-typedef int (*ENGINE_CTRL_FUNC_PTR)(int cmd, long i, void *p, void (*f)());
-
-/* The list of "engine" types is a static array of (const ENGINE*)
- * pointers (not dynamic because static is fine for now and we otherwise
- * have to hook an appropriate load/unload function in to initialise and
- * cleanup). */
-typedef struct engine_st ENGINE;
-#endif
-
-/* STRUCTURE functions ... all of these functions deal with pointers to
- * ENGINE structures where the pointers have a "structural reference".
- * This means that their reference is to allow access to the structure
- * but it does not imply that the structure is functional. To simply
- * increment or decrement the structural reference count, use ENGINE_new
- * and ENGINE_free. NB: This is not required when iterating using
- * ENGINE_get_next as it will automatically decrement the structural
- * reference count of the "current" ENGINE and increment the structural
- * reference count of the ENGINE it returns (unless it is NULL). */
-
-/* Get the first/last "ENGINE" type available. */
-ENGINE *ENGINE_get_first(void);
-ENGINE *ENGINE_get_last(void);
-/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
-ENGINE *ENGINE_get_next(ENGINE *e);
-ENGINE *ENGINE_get_prev(ENGINE *e);
-/* Add another "ENGINE" type into the array. */
-int ENGINE_add(ENGINE *e);
-/* Remove an existing "ENGINE" type from the array. */
-int ENGINE_remove(ENGINE *e);
-/* Retrieve an engine from the list by its unique "id" value. */
-ENGINE *ENGINE_by_id(const char *id);
-
-/* These functions are useful for manufacturing new ENGINE
- * structures. They don't address reference counting at all -
- * one uses them to populate an ENGINE structure with personalised
- * implementations of things prior to using it directly or adding
- * it to the builtin ENGINE list in OpenSSL. These are also here
- * so that the ENGINE structure doesn't have to be exposed and
- * break binary compatibility!
- *
- * NB: I'm changing ENGINE_new to force the ENGINE structure to
- * be allocated from within OpenSSL. See the comment for
- * ENGINE_get_struct_size().
- */
-#if 0
-ENGINE *ENGINE_new(ENGINE *e);
-#else
-ENGINE *ENGINE_new(void);
-#endif
-int ENGINE_free(ENGINE *e);
-int ENGINE_set_id(ENGINE *e, const char *id);
-int ENGINE_set_name(ENGINE *e, const char *name);
-int ENGINE_set_RSA(ENGINE *e, RSA_METHOD *rsa_meth);
-int ENGINE_set_DSA(ENGINE *e, DSA_METHOD *dsa_meth);
-int ENGINE_set_DH(ENGINE *e, DH_METHOD *dh_meth);
-int ENGINE_set_RAND(ENGINE *e, RAND_METHOD *rand_meth);
-int ENGINE_set_BN_mod_exp(ENGINE *e, BN_MOD_EXP bn_mod_exp);
-int ENGINE_set_BN_mod_exp_crt(ENGINE *e, BN_MOD_EXP_CRT bn_mod_exp_crt);
-int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f);
-int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f);
-int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f);
-
-/* These return values from within the ENGINE structure. These can
- * be useful with functional references as well as structural
- * references - it depends which you obtained. Using the result
- * for functional purposes if you only obtained a structural
- * reference may be problematic! */
-const char *ENGINE_get_id(ENGINE *e);
-const char *ENGINE_get_name(ENGINE *e);
-RSA_METHOD *ENGINE_get_RSA(ENGINE *e);
-DSA_METHOD *ENGINE_get_DSA(ENGINE *e);
-DH_METHOD *ENGINE_get_DH(ENGINE *e);
-RAND_METHOD *ENGINE_get_RAND(ENGINE *e);
-BN_MOD_EXP ENGINE_get_BN_mod_exp(ENGINE *e);
-BN_MOD_EXP_CRT ENGINE_get_BN_mod_exp_crt(ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(ENGINE *e);
-ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(ENGINE *e);
-
-/* ENGINE_new is normally passed a NULL in the first parameter because
- * the calling code doesn't have access to the definition of the ENGINE
- * structure (for good reason). However, if the caller wishes to use
- * its own memory allocation or use a static array, the following call
- * should be used to check the amount of memory the ENGINE structure
- * will occupy. This will make the code more future-proof.
- *
- * NB: I'm "#if 0"-ing this out because it's better to force the use of
- * internally allocated memory. See similar change in ENGINE_new().
- */
-#if 0
-int ENGINE_get_struct_size(void);
-#endif
-
-/* FUNCTIONAL functions. These functions deal with ENGINE structures
- * that have (or will) be initialised for use. Broadly speaking, the
- * structural functions are useful for iterating the list of available
- * engine types, creating new engine types, and other "list" operations.
- * These functions actually deal with ENGINEs that are to be used. As
- * such these functions can fail (if applicable) when particular
- * engines are unavailable - eg. if a hardware accelerator is not
- * attached or not functioning correctly. Each ENGINE has 2 reference
- * counts; structural and functional. Every time a functional reference
- * is obtained or released, a corresponding structural reference is
- * automatically obtained or released too. */
-
-/* Initialise a engine type for use (or up its reference count if it's
- * already in use). This will fail if the engine is not currently
- * operational and cannot initialise. */
-int ENGINE_init(ENGINE *e);
-/* Free a functional reference to a engine type. This does not require
- * a corresponding call to ENGINE_free as it also releases a structural
- * reference. */
-int ENGINE_finish(ENGINE *e);
-/* Send control parametrised commands to the engine.  The possibilities
- * to send down an integer, a pointer to data or a function pointer are
- * provided.  Any of the parameters may or may not be NULL, depending
- * on the command number */
-/* WARNING: This is currently experimental and may change radically! */
-int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());
-
-/* The following functions handle keys that are stored in some secondary
- * location, handled by the engine.  The storage may be on a card or
- * whatever. */
-EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
-	const char *passphrase);
-EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
-	const char *passphrase);
-
-/* This returns a pointer for the current ENGINE structure that
- * is (by default) performing any RSA operations. The value returned
- * is an incremented reference, so it should be free'd (ENGINE_finish)
- * before it is discarded. */
-ENGINE *ENGINE_get_default_RSA(void);
-/* Same for the other "methods" */
-ENGINE *ENGINE_get_default_DSA(void);
-ENGINE *ENGINE_get_default_DH(void);
-ENGINE *ENGINE_get_default_RAND(void);
-ENGINE *ENGINE_get_default_BN_mod_exp(void);
-ENGINE *ENGINE_get_default_BN_mod_exp_crt(void);
-
-/* This sets a new default ENGINE structure for performing RSA
- * operations. If the result is non-zero (success) then the ENGINE
- * structure will have had its reference count up'd so the caller
- * should still free their own reference 'e'. */
-int ENGINE_set_default_RSA(ENGINE *e);
-/* Same for the other "methods" */
-int ENGINE_set_default_DSA(ENGINE *e);
-int ENGINE_set_default_DH(ENGINE *e);
-int ENGINE_set_default_RAND(ENGINE *e);
-int ENGINE_set_default_BN_mod_exp(ENGINE *e);
-int ENGINE_set_default_BN_mod_exp_crt(ENGINE *e);
-
-/* The combination "set" - the flags are bitwise "OR"d from the
- * ENGINE_METHOD_*** defines above. */
-int ENGINE_set_default(ENGINE *e, unsigned int flags);
-
-/* Obligatory error function. */
-void ERR_load_ENGINE_strings(void);
-
-/*
- * Error codes for all engine functions. NB: We use "generic"
- * function names instead of per-implementation ones because this
- * levels the playing field for externally implemented bootstrapped
- * support code. As the filename and line number is included, it's
- * more important to indicate the type of function, so that
- * bootstrapped code (that can't easily add its own errors in) can
- * use the same error codes too.
- */
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-
-/* Error codes for the ENGINE functions. */
-
-/* Function codes. */
-#define ENGINE_F_ATALLA_FINISH				 135
-#define ENGINE_F_ATALLA_INIT				 136
-#define ENGINE_F_ATALLA_MOD_EXP				 137
-#define ENGINE_F_ATALLA_RSA_MOD_EXP			 138
-#define ENGINE_F_CSWIFT_DSA_SIGN			 133
-#define ENGINE_F_CSWIFT_DSA_VERIFY			 134
-#define ENGINE_F_CSWIFT_FINISH				 100
-#define ENGINE_F_CSWIFT_INIT				 101
-#define ENGINE_F_CSWIFT_MOD_EXP				 102
-#define ENGINE_F_CSWIFT_MOD_EXP_CRT			 103
-#define ENGINE_F_CSWIFT_RSA_MOD_EXP			 104
-#define ENGINE_F_ENGINE_ADD				 105
-#define ENGINE_F_ENGINE_BY_ID				 106
-#define ENGINE_F_ENGINE_CTRL				 142
-#define ENGINE_F_ENGINE_FINISH				 107
-#define ENGINE_F_ENGINE_FREE				 108
-#define ENGINE_F_ENGINE_GET_BN_MOD_EXP			 109
-#define ENGINE_F_ENGINE_GET_BN_MOD_EXP_CRT		 110
-#define ENGINE_F_ENGINE_GET_CTRL_FUNCTION		 144
-#define ENGINE_F_ENGINE_GET_DH				 111
-#define ENGINE_F_ENGINE_GET_DSA				 112
-#define ENGINE_F_ENGINE_GET_FINISH_FUNCTION		 145
-#define ENGINE_F_ENGINE_GET_ID				 113
-#define ENGINE_F_ENGINE_GET_INIT_FUNCTION		 146
-#define ENGINE_F_ENGINE_GET_NAME			 114
-#define ENGINE_F_ENGINE_GET_NEXT			 115
-#define ENGINE_F_ENGINE_GET_PREV			 116
-#define ENGINE_F_ENGINE_GET_RAND			 117
-#define ENGINE_F_ENGINE_GET_RSA				 118
-#define ENGINE_F_ENGINE_INIT				 119
-#define ENGINE_F_ENGINE_LIST_ADD			 120
-#define ENGINE_F_ENGINE_LIST_REMOVE			 121
-#define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY		 150
-#define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY			 151
-#define ENGINE_F_ENGINE_NEW				 122
-#define ENGINE_F_ENGINE_REMOVE				 123
-#define ENGINE_F_ENGINE_SET_BN_MOD_EXP			 124
-#define ENGINE_F_ENGINE_SET_BN_MOD_EXP_CRT		 125
-#define ENGINE_F_ENGINE_SET_CTRL_FUNCTION		 147
-#define ENGINE_F_ENGINE_SET_DEFAULT_TYPE		 126
-#define ENGINE_F_ENGINE_SET_DH				 127
-#define ENGINE_F_ENGINE_SET_DSA				 128
-#define ENGINE_F_ENGINE_SET_FINISH_FUNCTION		 148
-#define ENGINE_F_ENGINE_SET_ID				 129
-#define ENGINE_F_ENGINE_SET_INIT_FUNCTION		 149
-#define ENGINE_F_ENGINE_SET_NAME			 130
-#define ENGINE_F_ENGINE_SET_RAND			 131
-#define ENGINE_F_ENGINE_SET_RSA				 132
-#define ENGINE_F_ENGINE_UNLOAD_KEY			 152
-#define ENGINE_F_HWCRHK_CTRL				 143
-#define ENGINE_F_HWCRHK_FINISH				 135
-#define ENGINE_F_HWCRHK_GET_PASS			 155
-#define ENGINE_F_HWCRHK_INIT				 136
-#define ENGINE_F_HWCRHK_LOAD_PRIVKEY			 153
-#define ENGINE_F_HWCRHK_LOAD_PUBKEY			 154
-#define ENGINE_F_HWCRHK_MOD_EXP				 137
-#define ENGINE_F_HWCRHK_MOD_EXP_CRT			 138
-#define ENGINE_F_HWCRHK_RAND_BYTES			 139
-#define ENGINE_F_HWCRHK_RSA_MOD_EXP			 140
-#define ENGINE_F_LOG_MESSAGE				 141
-
-/* Reason codes. */
-#define ENGINE_R_ALREADY_LOADED				 100
-#define ENGINE_R_BIO_WAS_FREED				 121
-#define ENGINE_R_BN_CTX_FULL				 101
-#define ENGINE_R_BN_EXPAND_FAIL				 102
-#define ENGINE_R_CHIL_ERROR				 123
-#define ENGINE_R_CONFLICTING_ENGINE_ID			 103
-#define ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED		 119
-#define ENGINE_R_DSO_FAILURE				 104
-#define ENGINE_R_ENGINE_IS_NOT_IN_LIST			 105
-#define ENGINE_R_FAILED_LOADING_PRIVATE_KEY		 128
-#define ENGINE_R_FAILED_LOADING_PUBLIC_KEY		 129
-#define ENGINE_R_FINISH_FAILED				 106
-#define ENGINE_R_GET_HANDLE_FAILED			 107
-#define ENGINE_R_ID_OR_NAME_MISSING			 108
-#define ENGINE_R_INIT_FAILED				 109
-#define ENGINE_R_INTERNAL_LIST_ERROR			 110
-#define ENGINE_R_MISSING_KEY_COMPONENTS			 111
-#define ENGINE_R_NOT_INITIALISED			 117
-#define ENGINE_R_NOT_LOADED				 112
-#define ENGINE_R_NO_CALLBACK				 127
-#define ENGINE_R_NO_CONTROL_FUNCTION			 120
-#define ENGINE_R_NO_KEY					 124
-#define ENGINE_R_NO_LOAD_FUNCTION			 125
-#define ENGINE_R_NO_REFERENCE				 130
-#define ENGINE_R_NO_SUCH_ENGINE				 116
-#define ENGINE_R_NO_UNLOAD_FUNCTION			 126
-#define ENGINE_R_PROVIDE_PARAMETERS			 113
-#define ENGINE_R_REQUEST_FAILED				 114
-#define ENGINE_R_REQUEST_FALLBACK			 118
-#define ENGINE_R_SIZE_TOO_LARGE_OR_TOO_SMALL		 122
-#define ENGINE_R_UNIT_FAILURE				 115
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
-

crypto/engine/engine_err.c

@@ -1,183 +0,0 @@
-/* crypto/engine/engine_err.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/engine.h>
-
-/* BEGIN ERROR CODES */
-#ifndef NO_ERR
-static ERR_STRING_DATA ENGINE_str_functs[]=
-	{
-{ERR_PACK(0,ENGINE_F_ATALLA_FINISH,0),	"ATALLA_FINISH"},
-{ERR_PACK(0,ENGINE_F_ATALLA_INIT,0),	"ATALLA_INIT"},
-{ERR_PACK(0,ENGINE_F_ATALLA_MOD_EXP,0),	"ATALLA_MOD_EXP"},
-{ERR_PACK(0,ENGINE_F_ATALLA_RSA_MOD_EXP,0),	"ATALLA_RSA_MOD_EXP"},
-{ERR_PACK(0,ENGINE_F_CSWIFT_DSA_SIGN,0),	"CSWIFT_DSA_SIGN"},
-{ERR_PACK(0,ENGINE_F_CSWIFT_DSA_VERIFY,0),	"CSWIFT_DSA_VERIFY"},
-{ERR_PACK(0,ENGINE_F_CSWIFT_FINISH,0),	"CSWIFT_FINISH"},
-{ERR_PACK(0,ENGINE_F_CSWIFT_INIT,0),	"CSWIFT_INIT"},
-{ERR_PACK(0,ENGINE_F_CSWIFT_MOD_EXP,0),	"CSWIFT_MOD_EXP"},
-{ERR_PACK(0,ENGINE_F_CSWIFT_MOD_EXP_CRT,0),	"CSWIFT_MOD_EXP_CRT"},
-{ERR_PACK(0,ENGINE_F_CSWIFT_RSA_MOD_EXP,0),	"CSWIFT_RSA_MOD_EXP"},
-{ERR_PACK(0,ENGINE_F_ENGINE_ADD,0),	"ENGINE_add"},
-{ERR_PACK(0,ENGINE_F_ENGINE_BY_ID,0),	"ENGINE_by_id"},
-{ERR_PACK(0,ENGINE_F_ENGINE_CTRL,0),	"ENGINE_ctrl"},
-{ERR_PACK(0,ENGINE_F_ENGINE_FINISH,0),	"ENGINE_finish"},
-{ERR_PACK(0,ENGINE_F_ENGINE_FREE,0),	"ENGINE_free"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_BN_MOD_EXP,0),	"ENGINE_get_BN_mod_exp"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_BN_MOD_EXP_CRT,0),	"ENGINE_get_BN_mod_exp_crt"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_CTRL_FUNCTION,0),	"ENGINE_get_ctrl_function"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_DH,0),	"ENGINE_get_DH"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_DSA,0),	"ENGINE_get_DSA"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_FINISH_FUNCTION,0),	"ENGINE_get_finish_function"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_ID,0),	"ENGINE_get_id"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_INIT_FUNCTION,0),	"ENGINE_get_init_function"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_NAME,0),	"ENGINE_get_name"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_NEXT,0),	"ENGINE_get_next"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_PREV,0),	"ENGINE_get_prev"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_RAND,0),	"ENGINE_get_RAND"},
-{ERR_PACK(0,ENGINE_F_ENGINE_GET_RSA,0),	"ENGINE_get_RSA"},
-{ERR_PACK(0,ENGINE_F_ENGINE_INIT,0),	"ENGINE_init"},
-{ERR_PACK(0,ENGINE_F_ENGINE_LIST_ADD,0),	"ENGINE_LIST_ADD"},
-{ERR_PACK(0,ENGINE_F_ENGINE_LIST_REMOVE,0),	"ENGINE_LIST_REMOVE"},
-{ERR_PACK(0,ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,0),	"ENGINE_load_private_key"},
-{ERR_PACK(0,ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,0),	"ENGINE_load_public_key"},
-{ERR_PACK(0,ENGINE_F_ENGINE_NEW,0),	"ENGINE_new"},
-{ERR_PACK(0,ENGINE_F_ENGINE_REMOVE,0),	"ENGINE_remove"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_BN_MOD_EXP,0),	"ENGINE_set_BN_mod_exp"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_BN_MOD_EXP_CRT,0),	"ENGINE_set_BN_mod_exp_crt"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_CTRL_FUNCTION,0),	"ENGINE_set_ctrl_function"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_DEFAULT_TYPE,0),	"ENGINE_SET_DEFAULT_TYPE"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_DH,0),	"ENGINE_set_DH"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_DSA,0),	"ENGINE_set_DSA"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_FINISH_FUNCTION,0),	"ENGINE_set_finish_function"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_ID,0),	"ENGINE_set_id"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_INIT_FUNCTION,0),	"ENGINE_set_init_function"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_NAME,0),	"ENGINE_set_name"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_RAND,0),	"ENGINE_set_RAND"},
-{ERR_PACK(0,ENGINE_F_ENGINE_SET_RSA,0),	"ENGINE_set_RSA"},
-{ERR_PACK(0,ENGINE_F_ENGINE_UNLOAD_KEY,0),	"ENGINE_UNLOAD_KEY"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_CTRL,0),	"HWCRHK_CTRL"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_FINISH,0),	"HWCRHK_FINISH"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_GET_PASS,0),	"HWCRHK_GET_PASS"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_INIT,0),	"HWCRHK_INIT"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_LOAD_PRIVKEY,0),	"HWCRHK_LOAD_PRIVKEY"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_LOAD_PUBKEY,0),	"HWCRHK_LOAD_PUBKEY"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_MOD_EXP,0),	"HWCRHK_MOD_EXP"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_MOD_EXP_CRT,0),	"HWCRHK_MOD_EXP_CRT"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_RAND_BYTES,0),	"HWCRHK_RAND_BYTES"},
-{ERR_PACK(0,ENGINE_F_HWCRHK_RSA_MOD_EXP,0),	"HWCRHK_RSA_MOD_EXP"},
-{ERR_PACK(0,ENGINE_F_LOG_MESSAGE,0),	"LOG_MESSAGE"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA ENGINE_str_reasons[]=
-	{
-{ENGINE_R_ALREADY_LOADED                 ,"already loaded"},
-{ENGINE_R_BIO_WAS_FREED                  ,"bio was freed"},
-{ENGINE_R_BN_CTX_FULL                    ,"BN_CTX full"},
-{ENGINE_R_BN_EXPAND_FAIL                 ,"bn_expand fail"},
-{ENGINE_R_CHIL_ERROR                     ,"chil error"},
-{ENGINE_R_CONFLICTING_ENGINE_ID          ,"conflicting engine id"},
-{ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED   ,"ctrl command not implemented"},
-{ENGINE_R_DSO_FAILURE                    ,"DSO failure"},
-{ENGINE_R_ENGINE_IS_NOT_IN_LIST          ,"engine is not in the list"},
-{ENGINE_R_FAILED_LOADING_PRIVATE_KEY     ,"failed loading private key"},
-{ENGINE_R_FAILED_LOADING_PUBLIC_KEY      ,"failed loading public key"},
-{ENGINE_R_FINISH_FAILED                  ,"finish failed"},
-{ENGINE_R_GET_HANDLE_FAILED              ,"could not obtain hardware handle"},
-{ENGINE_R_ID_OR_NAME_MISSING             ,"'id' or 'name' missing"},
-{ENGINE_R_INIT_FAILED                    ,"init failed"},
-{ENGINE_R_INTERNAL_LIST_ERROR            ,"internal list error"},
-{ENGINE_R_MISSING_KEY_COMPONENTS         ,"missing key components"},
-{ENGINE_R_NOT_INITIALISED                ,"not initialised"},
-{ENGINE_R_NOT_LOADED                     ,"not loaded"},
-{ENGINE_R_NO_CALLBACK                    ,"no callback"},
-{ENGINE_R_NO_CONTROL_FUNCTION            ,"no control function"},
-{ENGINE_R_NO_KEY                         ,"no key"},
-{ENGINE_R_NO_LOAD_FUNCTION               ,"no load function"},
-{ENGINE_R_NO_REFERENCE			 ,"no reference"},
-{ENGINE_R_NO_SUCH_ENGINE                 ,"no such engine"},
-{ENGINE_R_NO_UNLOAD_FUNCTION             ,"no unload function"},
-{ENGINE_R_PROVIDE_PARAMETERS             ,"provide parameters"},
-{ENGINE_R_REQUEST_FAILED                 ,"request failed"},
-{ENGINE_R_REQUEST_FALLBACK               ,"request fallback"},
-{ENGINE_R_SIZE_TOO_LARGE_OR_TOO_SMALL    ,"size too large or too small"},
-{ENGINE_R_UNIT_FAILURE                   ,"unit failure"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_ENGINE_strings(void)
-	{
-	static int init=1;
-
-	if (init)
-		{
-		init=0;
-#ifndef NO_ERR
-		ERR_load_strings(ERR_LIB_ENGINE,ENGINE_str_functs);
-		ERR_load_strings(ERR_LIB_ENGINE,ENGINE_str_reasons);
-#endif
-
-		}
-	}

crypto/engine/engine_int.h

@@ -1,160 +0,0 @@
-/* crypto/engine/engine_int.h */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_ENGINE_INT_H
-#define HEADER_ENGINE_INT_H
-
-#include <openssl/rsa.h>
-#include <openssl/dsa.h>
-#include <openssl/dh.h>
-#include <openssl/rand.h>
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Bitwise OR-able values for the "flags" variable in ENGINE. */
-#define ENGINE_FLAGS_MALLOCED	0x0001
-
-#ifndef HEADER_ENGINE_H
-/* Regrettably, we need to reproduce the "BN" function types here
- * because there is no such "BIGNUM_METHOD" as there is with RSA,
- * DSA, etc. We do this so that we don't have a case where engine.h
- * and engine_int.h conflict with each other. */
-typedef int (*BN_MOD_EXP)(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
- 
-/* private key operation for RSA, provided seperately in case other
- * RSA implementations wish to use it. */
-typedef int (*BN_MOD_EXP_CRT)(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *q, const BIGNUM *dmp1, const BIGNUM *dmq1,
-		const BIGNUM *iqmp, BN_CTX *ctx);
-
-/* Generic function pointer */
-typedef int (*ENGINE_GEN_FUNC_PTR)();
-/* Generic function pointer taking no arguments */
-typedef int (*ENGINE_GEN_INT_FUNC_PTR)(void);
-/* Specific control function pointer */
-typedef int (*ENGINE_CTRL_FUNC_PTR)(int cmd, long i, void *p, void (*f)());
-
-#endif
-
-/* This is a structure for storing implementations of various crypto
- * algorithms and functions. */
-typedef struct engine_st
-	{
-	const char *id;
-	const char *name;
-	RSA_METHOD *rsa_meth;
-	DSA_METHOD *dsa_meth;
-	DH_METHOD *dh_meth;
-	RAND_METHOD *rand_meth;
-	BN_MOD_EXP bn_mod_exp;
-	BN_MOD_EXP_CRT bn_mod_exp_crt;
-	int (*init)(void);
-	int (*finish)(void);
-	int (*ctrl)(int cmd, long i, void *p, void (*f)());
-	EVP_PKEY *(*load_privkey)(const char *key_id, const char *passphrase);
-	EVP_PKEY *(*load_pubkey)(const char *key_id, const char *passphrase);
-	int flags;
-	/* reference count on the structure itself */
-	int struct_ref;
-	/* reference count on usability of the engine type. NB: This
-	 * controls the loading and initialisation of any functionlity
-	 * required by this engine, whereas the previous count is
-	 * simply to cope with (de)allocation of this structure. Hence,
-	 * running_ref <= struct_ref at all times. */
-	int funct_ref;
-	/* Used to maintain the linked-list of engines. */
-	struct engine_st *prev;
-	struct engine_st *next;
-	} ENGINE;
-
-/* BUILT-IN ENGINES. (these functions are only ever called once and
- * do not return references - they are purely for bootstrapping). */
-
-/* Returns a structure of software only methods (the default). */
-ENGINE *ENGINE_openssl();
-
-#ifndef NO_HW
-
-#ifndef NO_HW_CSWIFT
-/* Returns a structure of cswift methods ... NB: This can exist and be
- * "used" even on non-cswift systems because the "init" will fail if the
- * card/library are not found. */
-ENGINE *ENGINE_cswift();
-#endif /* !NO_HW_CSWIFT */
-
-#ifndef NO_HW_NCIPHER
-ENGINE *ENGINE_ncipher();
-#endif /* !NO_HW_NCIPHER */
-
-#ifndef NO_HW_ATALLA
-/* Returns a structure of atalla methods. */
-ENGINE *ENGINE_atalla();
-#endif /* !NO_HW_ATALLA */
-
-#endif /* !NO_HW */
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif /* HEADER_ENGINE_INT_H */

crypto/engine/engine_lib.c

@@ -1,488 +0,0 @@
-/* crypto/engine/engine_lib.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include "engine_int.h"
-#include <openssl/engine.h>
-
-/* These pointers each have their own "functional reference" when they
- * are non-NULL. Similarly, when they are retrieved by a call to
- * ENGINE_get_default_[RSA|DSA|...] the returned pointer is also a
- * reference and the caller is responsible for freeing that when they
- * are finished with it (with a call to ENGINE_finish() *NOT* just
- * ENGINE_free()!!!!!!). */
-static ENGINE *engine_def_rsa = NULL;
-static ENGINE *engine_def_dsa = NULL;
-static ENGINE *engine_def_dh = NULL;
-static ENGINE *engine_def_rand = NULL;
-static ENGINE *engine_def_bn_mod_exp = NULL;
-static ENGINE *engine_def_bn_mod_exp_crt = NULL;
-/* A static "once-only" flag used to control if/when the above were
- * initialised to suitable start-up defaults. */
-static int engine_def_flag = 0;
-
-/* This is used in certain static utility functions to save code
- * repetition for per-algorithm functions. */
-typedef enum {
-	ENGINE_TYPE_RSA,
-	ENGINE_TYPE_DSA,
-	ENGINE_TYPE_DH,
-	ENGINE_TYPE_RAND,
-	ENGINE_TYPE_BN_MOD_EXP,
-	ENGINE_TYPE_BN_MOD_EXP_CRT
-	} ENGINE_TYPE;
-
-static void engine_def_check_util(ENGINE **def, ENGINE *val)
-	{
-	*def = val;
-	val->struct_ref++;
-	val->funct_ref++;
-	}
-
-/* In a slight break with convention - this static function must be
- * called *outside* any locking of CRYPTO_LOCK_ENGINE. */
-static void engine_def_check(void)
-	{
-	ENGINE *e;
-	if(engine_def_flag)
-		return;
-	e = ENGINE_get_first();
-	if(e == NULL)
-		/* The list is empty ... not much we can do! */
-		return;
-	/* We have a structural reference, see if getting a functional
-	 * reference is possible. This is done to cope with init errors
-	 * in the engine - the following locked code does a bunch of
-	 * manual "ENGINE_init"s which do *not* allow such an init
-	 * error so this is worth doing. */
-	if(ENGINE_init(e))
-		{
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		/* Doing another check here prevents an obvious race
-		 * condition because the whole function itself cannot
-		 * be locked. */
-		if(engine_def_flag)
-			goto skip_set_defaults;
-		/* OK, we got a functional reference, so we get one each
-		 * for the defaults too. */
-		engine_def_check_util(&engine_def_rsa, e);
-		engine_def_check_util(&engine_def_dsa, e);
-		engine_def_check_util(&engine_def_dh, e);
-		engine_def_check_util(&engine_def_rand, e);
-		engine_def_check_util(&engine_def_bn_mod_exp, e);
-		engine_def_check_util(&engine_def_bn_mod_exp_crt, e);
-		engine_def_flag = 1;
-skip_set_defaults:
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		/* The "if" needs to be balanced out. */
-		ENGINE_finish(e);
-		}
-	/* We need to balance out the fact we obtained a structural
-	 * reference to begin with from ENGINE_get_first(). */
-	ENGINE_free(e);
-	}
-
-/* Initialise a engine type for use (or up its functional reference count
- * if it's already in use). */
-int ENGINE_init(ENGINE *e)
-	{
-	int to_return = 1;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_INIT,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if((e->funct_ref == 0) && e->init)
-		/* This is the first functional reference and the engine
-		 * requires initialisation so we do it now. */
-		to_return = e->init();
-	if(to_return)
-		{
-		/* OK, we return a functional reference which is also a
-		 * structural reference. */
-		e->struct_ref++;
-		e->funct_ref++;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return to_return;
-	}
-
-/* Free a functional reference to a engine type */
-int ENGINE_finish(ENGINE *e)
-	{
-	int to_return = 1;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_FINISH,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if((e->funct_ref == 1) && e->finish)
-#if 0
-		/* This is the last functional reference and the engine
-		 * requires cleanup so we do it now. */
-		to_return = e->finish();
-	if(to_return)
-		{
-		/* Cleanup the functional reference which is also a
-		 * structural reference. */
-		e->struct_ref--;
-		e->funct_ref--;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-#else
-		/* I'm going to deliberately do a convoluted version of this
-		 * piece of code because we don't want "finish" functions
-		 * being called inside a locked block of code, if at all
-		 * possible. I'd rather have this call take an extra couple
-		 * of ticks than have throughput serialised on a externally-
-		 * provided callback function that may conceivably never come
-		 * back. :-( */
-		{
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		/* CODE ALERT: This *IS* supposed to be "=" and NOT "==" :-) */
-		if((to_return = e->finish()))
-			{
-			CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-			/* Cleanup the functional reference which is also a
-			 * structural reference. */
-			e->struct_ref--;
-			e->funct_ref--;
-			CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-			}
-		}
-	else
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-#endif
-	return to_return;
-	}
-
-EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
-	const char *passphrase)
-	{
-	EVP_PKEY *pkey;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(e->funct_ref == 0)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ENGINE_R_NOT_INITIALISED);
-		return 0;
-		}
-	if (!e->load_privkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ENGINE_R_NO_LOAD_FUNCTION);
-		return 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	pkey = e->load_privkey(key_id, passphrase);
-	if (!pkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ENGINE_R_FAILED_LOADING_PRIVATE_KEY);
-		return 0;
-		}
-	return pkey;
-	}
-
-EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
-	const char *passphrase)
-	{
-	EVP_PKEY *pkey;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(e->funct_ref == 0)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ENGINE_R_NOT_INITIALISED);
-		return 0;
-		}
-	if (!e->load_pubkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ENGINE_R_NO_LOAD_FUNCTION);
-		return 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	pkey = e->load_pubkey(key_id, passphrase);
-	if (!pkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ENGINE_R_FAILED_LOADING_PUBLIC_KEY);
-		return 0;
-		}
-	return pkey;
-	}
-
-/* Initialise a engine type for use (or up its functional reference count
- * if it's already in use). */
-int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(e->struct_ref == 0)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL,ENGINE_R_NO_REFERENCE);
-		return 0;
-		}
-	if (!e->ctrl)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL,ENGINE_R_NO_CONTROL_FUNCTION);
-		return 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return e->ctrl(cmd, i, p, f);
-	}
-
-static ENGINE *engine_get_default_type(ENGINE_TYPE t)
-	{
-	ENGINE *ret = NULL;
-
-	/* engine_def_check is lean and mean and won't replace any
-	 * prior default engines ... so we must ensure that it is always
-	 * the first function to get to touch the default values. */
-	engine_def_check();
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	switch(t)
-		{
-	case ENGINE_TYPE_RSA:
-		ret = engine_def_rsa; break;
-	case ENGINE_TYPE_DSA:
-		ret = engine_def_dsa; break;
-	case ENGINE_TYPE_DH:
-		ret = engine_def_dh; break;
-	case ENGINE_TYPE_RAND:
-		ret = engine_def_rand; break;
-	case ENGINE_TYPE_BN_MOD_EXP:
-		ret = engine_def_bn_mod_exp; break;
-	case ENGINE_TYPE_BN_MOD_EXP_CRT:
-		ret = engine_def_bn_mod_exp_crt; break;
-		}
-	/* Unforunately we can't do this work outside the lock with a
-	 * call to ENGINE_init() because that would leave a race
-	 * condition open. */
-	if(ret)
-		{
-		ret->struct_ref++;
-		ret->funct_ref++;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-
-ENGINE *ENGINE_get_default_RSA(void)
-	{
-	return engine_get_default_type(ENGINE_TYPE_RSA);
-	}
-
-ENGINE *ENGINE_get_default_DSA(void)
-	{
-	return engine_get_default_type(ENGINE_TYPE_DSA);
-	}
-
-ENGINE *ENGINE_get_default_DH(void)
-	{
-	return engine_get_default_type(ENGINE_TYPE_DH);
-	}
-
-ENGINE *ENGINE_get_default_RAND(void)
-	{
-	return engine_get_default_type(ENGINE_TYPE_RAND);
-	}
-
-ENGINE *ENGINE_get_default_BN_mod_exp(void)
-	{
-	return engine_get_default_type(ENGINE_TYPE_BN_MOD_EXP);
-	}
-
-ENGINE *ENGINE_get_default_BN_mod_exp_crt(void)
-	{
-	return engine_get_default_type(ENGINE_TYPE_BN_MOD_EXP_CRT);
-	}
-
-static int engine_set_default_type(ENGINE_TYPE t, ENGINE *e)
-	{
-	ENGINE *old = NULL;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_DEFAULT_TYPE,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	/* engine_def_check is lean and mean and won't replace any
-	 * prior default engines ... so we must ensure that it is always
-	 * the first function to get to touch the default values. */
-	engine_def_check();
-	/* Attempt to get a functional reference (we need one anyway, but
-	 * also, 'e' may be just a structural reference being passed in so
-	 * this call may actually be the first). */
-	if(!ENGINE_init(e))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_DEFAULT_TYPE,
-			ENGINE_R_INIT_FAILED);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	switch(t)
-		{
-	case ENGINE_TYPE_RSA:
-		old = engine_def_rsa;
-		engine_def_rsa = e; break;
-	case ENGINE_TYPE_DSA:
-		old = engine_def_dsa;
-		engine_def_dsa = e; break;
-	case ENGINE_TYPE_DH:
-		old = engine_def_dh;
-		engine_def_dh = e; break;
-	case ENGINE_TYPE_RAND:
-		old = engine_def_rand;
-		engine_def_rand = e; break;
-	case ENGINE_TYPE_BN_MOD_EXP:
-		old = engine_def_bn_mod_exp;
-		engine_def_bn_mod_exp = e; break;
-	case ENGINE_TYPE_BN_MOD_EXP_CRT:
-		old = engine_def_bn_mod_exp_crt;
-		engine_def_bn_mod_exp_crt = e; break;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	/* If we've replaced a previous value, then we need to remove the
-	 * functional reference we had. */
-	if(old && !ENGINE_finish(old))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_DEFAULT_TYPE,
-			ENGINE_R_FINISH_FAILED);
-		return 0;
-		}
-	return 1;
-	}
-
-int ENGINE_set_default_RSA(ENGINE *e)
-	{
-	return engine_set_default_type(ENGINE_TYPE_RSA, e);
-	}
-
-int ENGINE_set_default_DSA(ENGINE *e)
-	{
-	return engine_set_default_type(ENGINE_TYPE_DSA, e);
-	}
-
-int ENGINE_set_default_DH(ENGINE *e)
-	{
-	return engine_set_default_type(ENGINE_TYPE_DH, e);
-	}
-
-int ENGINE_set_default_RAND(ENGINE *e)
-	{
-	return engine_set_default_type(ENGINE_TYPE_RAND, e);
-	}
-
-int ENGINE_set_default_BN_mod_exp(ENGINE *e)
-	{
-	return engine_set_default_type(ENGINE_TYPE_BN_MOD_EXP, e);
-	}
-
-int ENGINE_set_default_BN_mod_exp_crt(ENGINE *e)
-	{
-	return engine_set_default_type(ENGINE_TYPE_BN_MOD_EXP_CRT, e);
-	}
-
-int ENGINE_set_default(ENGINE *e, unsigned int flags)
-	{
-	if((flags & ENGINE_METHOD_RSA) && e->rsa_meth &&
-			!ENGINE_set_default_RSA(e))
-		return 0;
-	if((flags & ENGINE_METHOD_DSA) && e->dsa_meth &&
-			!ENGINE_set_default_DSA(e))
-		return 0;
-	if((flags & ENGINE_METHOD_DH) && e->dh_meth &&
-			!ENGINE_set_default_DH(e))
-		return 0;
-	if((flags & ENGINE_METHOD_RAND) && e->rand_meth &&
-			!ENGINE_set_default_RAND(e))
-		return 0;
-	if((flags & ENGINE_METHOD_BN_MOD_EXP) && e->bn_mod_exp &&
-			!ENGINE_set_default_BN_mod_exp(e))
-		return 0;
-	if((flags & ENGINE_METHOD_BN_MOD_EXP_CRT) && e->bn_mod_exp_crt &&
-			!ENGINE_set_default_BN_mod_exp_crt(e))
-		return 0;
-	return 1;
-	}
-

crypto/engine/engine_list.c

@@ -1,675 +0,0 @@
-/* crypto/engine/engine_list.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include "engine_int.h"
-#include <openssl/engine.h>
-
-/* The linked-list of pointers to engine types. engine_list_head
- * incorporates an implicit structural reference but engine_list_tail
- * does not - the latter is a computational niceity and only points
- * to something that is already pointed to by its predecessor in the
- * list (or engine_list_head itself). In the same way, the use of the
- * "prev" pointer in each ENGINE is to save excessive list iteration,
- * it doesn't correspond to an extra structural reference. Hence,
- * engine_list_head, and each non-null "next" pointer account for
- * the list itself assuming exactly 1 structural reference on each
- * list member. */
-static ENGINE *engine_list_head = NULL;
-static ENGINE *engine_list_tail = NULL;
-/* A boolean switch, used to ensure we only initialise once. This
- * is needed because the engine list may genuinely become empty during
- * use (so we can't use engine_list_head as an indicator for example. */
-static int engine_list_flag = 0;
-
-/* These static functions starting with a lower case "engine_" always
- * take place when CRYPTO_LOCK_ENGINE has been locked up. */
-static int engine_list_add(ENGINE *e)
-	{
-	int conflict = 0;
-	ENGINE *iterator = NULL;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	iterator = engine_list_head;
-	while(iterator && !conflict)
-		{
-		conflict = (strcmp(iterator->id, e->id) == 0);
-		iterator = iterator->next;
-		}
-	if(conflict)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-			ENGINE_R_CONFLICTING_ENGINE_ID);
-		return 0;
-		}
-	if(engine_list_head == NULL)
-		{
-		/* We are adding to an empty list. */
-		if(engine_list_tail)
-			{
-			ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-				ENGINE_R_INTERNAL_LIST_ERROR);
-			return 0;
-			}
-		engine_list_head = e;
-		e->prev = NULL;
-		}
-	else
-		{
-		/* We are adding to the tail of an existing list. */
-		if((engine_list_tail == NULL) ||
-				(engine_list_tail->next != NULL))
-			{
-			ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-				ENGINE_R_INTERNAL_LIST_ERROR);
-			return 0;
-			}
-		engine_list_tail->next = e;
-		e->prev = engine_list_tail;
-		}
-	/* Having the engine in the list assumes a structural
-	 * reference. */
-	e->struct_ref++;
-	/* However it came to be, e is the last item in the list. */
-	engine_list_tail = e;
-	e->next = NULL;
-	return 1;
-	}
-
-static int engine_list_remove(ENGINE *e)
-	{
-	ENGINE *iterator;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_REMOVE,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	/* We need to check that e is in our linked list! */
-	iterator = engine_list_head;
-	while(iterator && (iterator != e))
-		iterator = iterator->next;
-	if(iterator == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_REMOVE,
-			ENGINE_R_ENGINE_IS_NOT_IN_LIST);
-		return 0;
-		}
-	/* un-link e from the chain. */
-	if(e->next)
-		e->next->prev = e->prev;
-	if(e->prev)
-		e->prev->next = e->next;
-	/* Correct our head/tail if necessary. */
-	if(engine_list_head == e)
-		engine_list_head = e->next;
-	if(engine_list_tail == e)
-		engine_list_tail = e->prev;
-	/* remove our structural reference. */
-	e->struct_ref--;
-	return 1;
-	}
-
-/* This check always takes place with CRYPTO_LOCK_ENGINE locked up
- * so we're synchronised, but we can't call anything that tries to
- * lock it again! :-) NB: For convenience (and code-clarity) we
- * don't output errors for failures of the engine_list_add function
- * as it will generate errors itself. */
-static int engine_internal_check(void)
-	{
-	if(engine_list_flag)
-		return 1;
-	/* This is our first time up, we need to populate the list
-	 * with our statically compiled-in engines. */
-	if(!engine_list_add(ENGINE_openssl()))
-		return 0;
-#ifndef NO_HW
-#ifndef NO_HW_CSWIFT
-	if(!engine_list_add(ENGINE_cswift()))
-		return 0;
-#endif /* !NO_HW_CSWIFT */
-#ifndef NO_HW_NCIPHER
-	if(!engine_list_add(ENGINE_ncipher()))
-		return 0;
-#endif /* !NO_HW_NCIPHER */
-#ifndef NO_HW_ATALLA
-	if(!engine_list_add(ENGINE_atalla()))
-		return 0;
-#endif /* !NO_HW_ATALLA */
-#endif /* !NO_HW */
-	engine_list_flag = 1;
-	return 1;
-	}
-
-/* Get the first/last "ENGINE" type available. */
-ENGINE *ENGINE_get_first(void)
-	{
-	ENGINE *ret = NULL;
-
-	CRYPTO_r_lock(CRYPTO_LOCK_ENGINE);
-	if(engine_internal_check())
-		{
-		ret = engine_list_head;
-		if(ret)
-			ret->struct_ref++;
-		}
-	CRYPTO_r_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-ENGINE *ENGINE_get_last(void)
-	{
-	ENGINE *ret = NULL;
-
-	CRYPTO_r_lock(CRYPTO_LOCK_ENGINE);
-	if(engine_internal_check())
-		{
-		ret = engine_list_tail;
-		if(ret)
-			ret->struct_ref++;
-		}
-	CRYPTO_r_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-
-/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
-ENGINE *ENGINE_get_next(ENGINE *e)
-	{
-	ENGINE *ret = NULL;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_NEXT,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_r_lock(CRYPTO_LOCK_ENGINE);
-	ret = e->next;
-	e->struct_ref--;
-	if(ret)
-		ret->struct_ref++;
-	CRYPTO_r_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-ENGINE *ENGINE_get_prev(ENGINE *e)
-	{
-	ENGINE *ret = NULL;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_PREV,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_r_lock(CRYPTO_LOCK_ENGINE);
-	ret = e->prev;
-	e->struct_ref--;
-	if(ret)
-		ret->struct_ref++;
-	CRYPTO_r_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-
-/* Add another "ENGINE" type into the list. */
-int ENGINE_add(ENGINE *e)
-	{
-	int to_return = 1;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_ADD,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if((e->id == NULL) || (e->name == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_ADD,
-			ENGINE_R_ID_OR_NAME_MISSING);
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(!engine_internal_check() || !engine_list_add(e))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_ADD,
-			ENGINE_R_INTERNAL_LIST_ERROR);
-		to_return = 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return to_return;
-	}
-
-/* Remove an existing "ENGINE" type from the array. */
-int ENGINE_remove(ENGINE *e)
-	{
-	int to_return = 1;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_REMOVE,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(!engine_internal_check() || !engine_list_remove(e))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_REMOVE,
-			ENGINE_R_INTERNAL_LIST_ERROR);
-		to_return = 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return to_return;
-	}
-
-ENGINE *ENGINE_by_id(const char *id)
-	{
-	ENGINE *iterator = NULL;
-	if(id == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_BY_ID,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	CRYPTO_r_lock(CRYPTO_LOCK_ENGINE);
-	if(!engine_internal_check())
-		ENGINEerr(ENGINE_F_ENGINE_BY_ID,
-			ENGINE_R_INTERNAL_LIST_ERROR);
-	else
-		{
-		iterator = engine_list_head;
-		while(iterator && (strcmp(id, iterator->id) != 0))
-			iterator = iterator->next;
-		if(iterator)
-			/* We need to return a structural reference */
-			iterator->struct_ref++;
-		}
-	CRYPTO_r_unlock(CRYPTO_LOCK_ENGINE);
-	if(iterator == NULL)
-		ENGINEerr(ENGINE_F_ENGINE_BY_ID,
-			ENGINE_R_NO_SUCH_ENGINE);
-	return iterator;
-	}
-
-/* As per the comments in engine.h, it is generally better all round
- * if the ENGINE structure is allocated within this framework. */
-#if 0
-int ENGINE_get_struct_size(void)
-	{
-	return sizeof(ENGINE);
-	}
-
-ENGINE *ENGINE_new(ENGINE *e)
-	{
-	ENGINE *ret;
-
-	if(e == NULL)
-		{
-		ret = (ENGINE *)(OPENSSL_malloc(sizeof(ENGINE));
-		if(ret == NULL)
-			{
-			ENGINEerr(ENGINE_F_ENGINE_NEW,
-				ERR_R_MALLOC_FAILURE);
-			return NULL;
-			}
-		}
-	else
-		ret = e;
-	memset(ret, 0, sizeof(ENGINE));
-	if(e)
-		ret->flags = ENGINE_FLAGS_MALLOCED;
-	ret->struct_ref = 1;
-	return ret;
-	}
-#else
-ENGINE *ENGINE_new(void)
-	{
-	ENGINE *ret;
-
-	ret = (ENGINE *)OPENSSL_malloc(sizeof(ENGINE));
-	if(ret == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_NEW, ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-	memset(ret, 0, sizeof(ENGINE));
-	ret->flags = ENGINE_FLAGS_MALLOCED;
-	ret->struct_ref = 1;
-	return ret;
-	}
-#endif
-
-int ENGINE_free(ENGINE *e)
-	{
-	int i;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_FREE,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	i = CRYPTO_add(&e->struct_ref,-1,CRYPTO_LOCK_ENGINE);
-#ifdef REF_PRINT
-	REF_PRINT("ENGINE",e);
-#endif
-	if (i > 0) return 1;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"ENGINE_free, bad reference count\n");
-		abort();
-		}
-#endif
-	if(e->flags & ENGINE_FLAGS_MALLOCED)
-		OPENSSL_free(e);
-	return 1;
-	}
-
-int ENGINE_set_id(ENGINE *e, const char *id)
-	{
-	if((e == NULL) || (id == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_ID,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->id = id;
-	return 1;
-	}
-
-int ENGINE_set_name(ENGINE *e, const char *name)
-	{
-	if((e == NULL) || (name == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_NAME,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->name = name;
-	return 1;
-	}
-
-int ENGINE_set_RSA(ENGINE *e, RSA_METHOD *rsa_meth)
-	{
-	if((e == NULL) || (rsa_meth == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_RSA,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->rsa_meth = rsa_meth;
-	return 1;
-	}
-
-int ENGINE_set_DSA(ENGINE *e, DSA_METHOD *dsa_meth)
-	{
-	if((e == NULL) || (dsa_meth == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_DSA,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->dsa_meth = dsa_meth;
-	return 1;
-	}
-
-int ENGINE_set_DH(ENGINE *e, DH_METHOD *dh_meth)
-	{
-	if((e == NULL) || (dh_meth == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_DH,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->dh_meth = dh_meth;
-	return 1;
-	}
-
-int ENGINE_set_RAND(ENGINE *e, RAND_METHOD *rand_meth)
-	{
-	if((e == NULL) || (rand_meth == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_RAND,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->rand_meth = rand_meth;
-	return 1;
-	}
-
-int ENGINE_set_BN_mod_exp(ENGINE *e, BN_MOD_EXP bn_mod_exp)
-	{
-	if((e == NULL) || (bn_mod_exp == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_BN_MOD_EXP,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->bn_mod_exp = bn_mod_exp;
-	return 1;
-	}
-
-int ENGINE_set_BN_mod_exp_crt(ENGINE *e, BN_MOD_EXP_CRT bn_mod_exp_crt)
-	{
-	if((e == NULL) || (bn_mod_exp_crt == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_BN_MOD_EXP_CRT,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->bn_mod_exp_crt = bn_mod_exp_crt;
-	return 1;
-	}
-
-int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f)
-	{
-	if((e == NULL) || (init_f == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_INIT_FUNCTION,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->init = init_f;
-	return 1;
-	}
-
-int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f)
-	{
-	if((e == NULL) || (finish_f == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_FINISH_FUNCTION,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->finish = finish_f;
-	return 1;
-	}
-
-int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f)
-	{
-	if((e == NULL) || (ctrl_f == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_CTRL_FUNCTION,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->ctrl = ctrl_f;
-	return 1;
-	}
-
-const char *ENGINE_get_id(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_ID,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	return e->id;
-	}
-
-const char *ENGINE_get_name(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_NAME,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	return e->name;
-	}
-
-RSA_METHOD *ENGINE_get_RSA(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_RSA,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->rsa_meth;
-	}
-
-DSA_METHOD *ENGINE_get_DSA(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_DSA,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->dsa_meth;
-	}
-
-DH_METHOD *ENGINE_get_DH(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_DH,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->dh_meth;
-	}
-
-RAND_METHOD *ENGINE_get_RAND(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_RAND,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->rand_meth;
-	}
-
-BN_MOD_EXP ENGINE_get_BN_mod_exp(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_BN_MOD_EXP,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->bn_mod_exp;
-	}
-
-BN_MOD_EXP_CRT ENGINE_get_BN_mod_exp_crt(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_BN_MOD_EXP_CRT,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->bn_mod_exp_crt;
-	}
-
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_INIT_FUNCTION,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->init;
-	}
-
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_FINISH_FUNCTION,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->finish;
-	}
-
-ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(ENGINE *e)
-	{
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_CTRL_FUNCTION,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	return e->ctrl;
-	}
-

crypto/engine/engine_openssl.c

@@ -1,174 +0,0 @@
-/* crypto/engine/engine_openssl.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include "engine_int.h"
-#include <openssl/engine.h>
-#include <openssl/dso.h>
-#include <openssl/rsa.h>
-#include <openssl/dsa.h>
-#include <openssl/dh.h>
-#include <openssl/rand.h>
-#include <openssl/bn.h>
-
-/* This is the only function we need to implement as OpenSSL
- * doesn't have a native CRT mod_exp. Perhaps this should be
- * BN_mod_exp_crt and moved into crypto/bn/ ?? ... dunno. */
-static int openssl_mod_exp_crt(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *q, const BIGNUM *dmp1, const BIGNUM *dmq1,
-		const BIGNUM *iqmp, BN_CTX *ctx);
-
-/* The ENGINE structure that can be pointed to. */
-static ENGINE engine_openssl =
-        {
-	"openssl",
-	"Software default engine support",
-	NULL,
-	NULL,
-	NULL, /* these methods are "stolen" in ENGINE_openssl() */
-	NULL,
-	NULL,
-	openssl_mod_exp_crt,
-	NULL, /* no init() */
-	NULL, /* no finish() */
-	NULL, /* no ctrl() */
-	NULL, /* no load_privkey() */
-	NULL, /* no load_pubkey() */
-	0, /* no flags */
-	0, 0, /* no references. */
-	NULL, NULL /* unlinked */
-        };
-
-/* As this is only ever called once, there's no need for locking
- * (indeed - the lock will already be held by our caller!!!) */
-ENGINE *ENGINE_openssl()
-	{
-	/* We need to populate our structure with the software pointers
-	 * that we want to steal. */
-	engine_openssl.rsa_meth = RSA_get_default_openssl_method();
-	engine_openssl.dsa_meth = DSA_get_default_openssl_method();
-	engine_openssl.dh_meth = DH_get_default_openssl_method();
-	engine_openssl.rand_meth = RAND_SSLeay();
-	engine_openssl.bn_mod_exp = BN_mod_exp;
-	return &engine_openssl;
-	}
-
-/* Chinese Remainder Theorem, taken and adapted from rsa_eay.c */
-static int openssl_mod_exp_crt(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *q, const BIGNUM *dmp1,
-			const BIGNUM *dmq1, const BIGNUM *iqmp, BN_CTX *ctx)
-	{
-	BIGNUM r1,m1;
-	int ret=0;
-	BN_CTX *bn_ctx;
-	BIGNUM *temp_bn = NULL;
-
-	if (ctx)
-		bn_ctx = ctx;
-	else
-		if ((bn_ctx=BN_CTX_new()) == NULL) goto err;
-	BN_init(&m1);
-	BN_init(&r1);
-	/* BN_mul() cannot accept const BIGNUMs so I use the BN_CTX
-	 * to duplicate what I need. <sigh> */
-	if ((temp_bn = BN_CTX_get(bn_ctx)) == NULL) goto err;
-	if (!BN_copy(temp_bn, iqmp)) goto err;
- 
-	if (!BN_mod(&r1, a, q, bn_ctx)) goto err;
-	if (!engine_openssl.bn_mod_exp(&m1, &r1, dmq1, q, bn_ctx))
-		goto err;
- 
-	if (!BN_mod(&r1, a, p, bn_ctx)) goto err;
-	if (!engine_openssl.bn_mod_exp(r, &r1, dmp1, p, bn_ctx))
-		goto err;
-
-	if (!BN_sub(r, r, &m1)) goto err;
-	/* This will help stop the size of r0 increasing, which does
-	 * affect the multiply if it optimised for a power of 2 size */
-	if (r->neg)
-		if (!BN_add(r, r, p)) goto err;
- 
-	if (!BN_mul(&r1, r, temp_bn, bn_ctx)) goto err;
-	if (!BN_mod(r, &r1, p, bn_ctx)) goto err;
-	/* If p < q it is occasionally possible for the correction of
-	 * adding 'p' if r is negative above to leave the result still
-	 * negative. This can break the private key operations: the following
-	 * second correction should *always* correct this rare occurrence.
-	 * This will *never* happen with OpenSSL generated keys because
-	 * they ensure p > q [steve]
-	 */
-	if (r->neg)
-		if (!BN_add(r, r, p)) goto err;
-	/* Again, BN_mul() will need non-const values. */
-	if (!BN_copy(temp_bn, q)) goto err;
-	if (!BN_mul(&r1, r, temp_bn, bn_ctx)) goto err;
-	if (!BN_add(r, &r1, &m1)) goto err;
- 
-	ret=1;
-err:
-	BN_clear_free(&m1);
-	BN_clear_free(&r1);
-	if (temp_bn)
-		bn_ctx->tos--;
-	if (!ctx)
-		BN_CTX_free(bn_ctx);
-	return(ret);
-	}

crypto/engine/enginetest.c

@@ -1,251 +0,0 @@
-/* crypto/engine/enginetest.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/engine.h>
-#include <openssl/err.h>
-
-static void display_engine_list()
-	{
-	ENGINE *h;
-	int loop;
-
-	h = ENGINE_get_first();
-	loop = 0;
-	printf("listing available engine types\n");
-	while(h)
-		{
-		printf("engine %i, id = \"%s\", name = \"%s\"\n",
-			loop++, ENGINE_get_id(h), ENGINE_get_name(h));
-		h = ENGINE_get_next(h);
-		}
-	printf("end of list\n");
-	}
-
-int main(int argc, char *argv[])
-	{
-	ENGINE *block[512];
-	char buf[256];
-	const char *id, *name;
-	ENGINE *ptr;
-	int loop;
-	int to_return = 1;
-	ENGINE *new_h1 = NULL;
-	ENGINE *new_h2 = NULL;
-	ENGINE *new_h3 = NULL;
-	ENGINE *new_h4 = NULL;
-
-	ERR_load_crypto_strings();
-
-	memset(block, 0, 512 * sizeof(ENGINE *));
-	if(((new_h1 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h1, "test_id0") ||
-			!ENGINE_set_name(new_h1, "First test item") ||
-			((new_h2 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h2, "test_id1") ||
-			!ENGINE_set_name(new_h2, "Second test item") ||
-			((new_h3 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h3, "test_id2") ||
-			!ENGINE_set_name(new_h3, "Third test item") ||
-			((new_h4 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h4, "test_id3") ||
-			!ENGINE_set_name(new_h4, "Fourth test item"))
-		{
-		printf("Couldn't set up test ENGINE structures\n");
-		goto end;
-		}
-	printf("\nenginetest beginning\n\n");
-	display_engine_list();
-	if(!ENGINE_add(new_h1))
-		{
-		printf("Add failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	ptr = ENGINE_get_first();
-	if(!ENGINE_remove(ptr))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_add(new_h3) || !ENGINE_add(new_h2))
-		{
-		printf("Add failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_remove(new_h2))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_add(new_h4))
-		{
-		printf("Add failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(ENGINE_add(new_h3))
-		{
-		printf("Add *should* have failed but didn't!\n");
-		goto end;
-		}
-	else
-		printf("Add that should fail did.\n");
-	ERR_clear_error();
-	if(ENGINE_remove(new_h2))
-		{
-		printf("Remove *should* have failed but didn't!\n");
-		goto end;
-		}
-	else
-		printf("Remove that should fail did.\n");
-	if(!ENGINE_remove(new_h1))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_remove(new_h3))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_remove(new_h4))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	/* Depending on whether there's any hardware support compiled
-	 * in, this remove may be destined to fail. */
-	ptr = ENGINE_get_first();
-	if(ptr)
-		if(!ENGINE_remove(ptr))
-			printf("Remove failed!i - probably no hardware "
-				"support present.\n");
-	display_engine_list();
-	if(!ENGINE_add(new_h1) || !ENGINE_remove(new_h1))
-		{
-		printf("Couldn't add and remove to an empty list!\n");
-		goto end;
-		}
-	else
-		printf("Successfully added and removed to an empty list!\n");
-	printf("About to beef up the engine-type list\n");
-	for(loop = 0; loop < 512; loop++)
-		{
-		sprintf(buf, "id%i", loop);
-		id = strdup(buf);
-		sprintf(buf, "Fake engine type %i", loop);
-		name = strdup(buf);
-		if(((block[loop] = ENGINE_new()) == NULL) ||
-				!ENGINE_set_id(block[loop], id) ||
-				!ENGINE_set_name(block[loop], name))
-			{
-			printf("Couldn't create block of ENGINE structures.\n"
-				"I'll probably also core-dump now, damn.\n");
-			goto end;
-			}
-		}
-	for(loop = 0; loop < 512; loop++)
-		{
-		if(!ENGINE_add(block[loop]))
-			{
-			printf("\nAdding stopped at %i, (%s,%s)\n",
-				loop, ENGINE_get_id(block[loop]),
-				ENGINE_get_name(block[loop]));
-			goto cleanup_loop;
-			}
-		else
-			printf("."); fflush(stdout);
-		}
-cleanup_loop:
-	printf("\nAbout to empty the engine-type list\n");
-	while((ptr = ENGINE_get_first()) != NULL)
-		{
-		if(!ENGINE_remove(ptr))
-			{
-			printf("\nRemove failed!\n");
-			goto end;
-			}
-		printf("."); fflush(stdout);
-		}
-	for(loop = 0; loop < 512; loop++)
-		{
-		free((char *)(ENGINE_get_id(block[loop])));
-		free((char *)(ENGINE_get_name(block[loop])));
-		}
-	printf("\nTests completed happily\n");
-	to_return = 0;
-end:
-	if(to_return)
-		ERR_print_errors_fp(stderr);
-	if(new_h1) ENGINE_free(new_h1);
-	if(new_h2) ENGINE_free(new_h2);
-	if(new_h3) ENGINE_free(new_h3);
-	if(new_h4) ENGINE_free(new_h4);
-	for(loop = 0; loop < 512; loop++)
-		if(block[loop])
-			ENGINE_free(block[loop]);
-	return to_return;
-	}

crypto/engine/hw_atalla.c

@@ -1,444 +0,0 @@
-/* crypto/engine/hw_atalla.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-#include "engine_int.h"
-#include <openssl/engine.h>
-
-#ifndef NO_HW
-#ifndef NO_HW_ATALLA
-
-#ifdef FLAT_INC
-#include "atalla.h"
-#else
-#include "vendor_defns/atalla.h"
-#endif
-
-static int atalla_init(void);
-static int atalla_finish(void);
-
-/* BIGNUM stuff */
-static int atalla_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
-
-/* RSA stuff */
-static int atalla_rsa_mod_exp(BIGNUM *r0, BIGNUM *I, RSA *rsa);
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int atalla_mod_exp_mont(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-/* DSA stuff */
-static int atalla_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-		BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-		BN_CTX *ctx, BN_MONT_CTX *in_mont);
-static int atalla_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx);
-
-/* DH stuff */
-/* This function is alised to mod_exp (with the DH and mont dropped). */
-static int atalla_mod_exp_dh(DH *dh, BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD atalla_rsa =
-	{
-	"Atalla RSA method",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	atalla_rsa_mod_exp,
-	atalla_mod_exp_mont,
-	NULL,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL
-	};
-
-/* Our internal DSA_METHOD that we provide pointers to */
-static DSA_METHOD atalla_dsa =
-	{
-	"Atalla DSA method",
-	NULL, /* dsa_do_sign */
-	NULL, /* dsa_sign_setup */
-	NULL, /* dsa_do_verify */
-	atalla_dsa_mod_exp, /* dsa_mod_exp */
-	atalla_mod_exp_dsa, /* bn_mod_exp */
-	NULL, /* init */
-	NULL, /* finish */
-	0, /* flags */
-	NULL /* app_data */
-	};
-
-/* Our internal DH_METHOD that we provide pointers to */
-static DH_METHOD atalla_dh =
-	{
-	"Atalla DH method",
-	NULL,
-	NULL,
-	atalla_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-
-/* Our ENGINE structure. */
-static ENGINE engine_atalla =
-        {
-	"atalla",
-	"Atalla hardware engine support",
-	&atalla_rsa,
-	&atalla_dsa,
-	&atalla_dh,
-	NULL,
-	atalla_mod_exp,
-	NULL,
-	atalla_init,
-	atalla_finish,
-	NULL, /* no ctrl() */
-	NULL, /* no load_privkey() */
-	NULL, /* no load_pubkey() */
-	0, /* no flags */
-	0, 0, /* no references */
-	NULL, NULL /* unlinked */
-        };
-
-/* As this is only ever called once, there's no need for locking
- * (indeed - the lock will already be held by our caller!!!) */
-ENGINE *ENGINE_atalla()
-	{
-	RSA_METHOD *meth1;
-	DSA_METHOD *meth2;
-	DH_METHOD *meth3;
-
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the atalla-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1 = RSA_PKCS1_SSLeay();
-	atalla_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-	atalla_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	atalla_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
-	atalla_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
-
-	/* Use the DSA_OpenSSL() method and just hook the mod_exp-ish
-	 * bits. */
-	meth2 = DSA_OpenSSL();
-	atalla_dsa.dsa_do_sign = meth2->dsa_do_sign;
-	atalla_dsa.dsa_sign_setup = meth2->dsa_sign_setup;
-	atalla_dsa.dsa_do_verify = meth2->dsa_do_verify;
-
-	/* Much the same for Diffie-Hellman */
-	meth3 = DH_OpenSSL();
-	atalla_dh.generate_key = meth3->generate_key;
-	atalla_dh.compute_key = meth3->compute_key;
-	return &engine_atalla;
-	}
-
-/* This is a process-global DSO handle used for loading and unloading
- * the Atalla library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-static DSO *atalla_dso = NULL;
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-static tfnASI_GetHardwareConfig *p_Atalla_GetHardwareConfig = NULL;
-static tfnASI_RSAPrivateKeyOpFn *p_Atalla_RSAPrivateKeyOpFn = NULL;
-static tfnASI_GetPerformanceStatistics *p_Atalla_GetPerformanceStatistics = NULL;
-
-/* (de)initialisation functions. */
-static int atalla_init()
-	{
-	tfnASI_GetHardwareConfig *p1;
-	tfnASI_RSAPrivateKeyOpFn *p2;
-	tfnASI_GetPerformanceStatistics *p3;
-	/* Not sure of the origin of this magic value, but Ben's code had it
-	 * and it seemed to have been working for a few people. :-) */
-	unsigned int config_buf[1024];
-
-	if(atalla_dso != NULL)
-		{
-		ENGINEerr(ENGINE_F_ATALLA_INIT,ENGINE_R_ALREADY_LOADED);
-		goto err;
-		}
-	/* Attempt to load libatasi.so/atasi.dll/whatever. Needs to be
-	 * changed unfortunately because the Atalla drivers don't have
-	 * standard library names that can be platform-translated well. */
-	/* TODO: Work out how to actually map to the names the Atalla
-	 * drivers really use - for now a symbollic link needs to be
-	 * created on the host system from libatasi.so to atasi.so on
-	 * unix variants. */
-	atalla_dso = DSO_load(NULL, ATALLA_LIBNAME, NULL,
-		DSO_FLAG_NAME_TRANSLATION);
-	if(atalla_dso == NULL)
-		{
-		ENGINEerr(ENGINE_F_ATALLA_INIT,ENGINE_R_DSO_FAILURE);
-		goto err;
-		}
-	if(!(p1 = (tfnASI_GetHardwareConfig *)DSO_bind_func(
-				atalla_dso, ATALLA_F1)) ||
-			!(p2 = (tfnASI_RSAPrivateKeyOpFn *)DSO_bind_func(
-				atalla_dso, ATALLA_F2)) ||
-			!(p3 = (tfnASI_GetPerformanceStatistics *)DSO_bind_func(
-				atalla_dso, ATALLA_F3)))
-		{
-		ENGINEerr(ENGINE_F_ATALLA_INIT,ENGINE_R_DSO_FAILURE);
-		goto err;
-		}
-	/* Copy the pointers */
-	p_Atalla_GetHardwareConfig = p1;
-	p_Atalla_RSAPrivateKeyOpFn = p2;
-	p_Atalla_GetPerformanceStatistics = p3;
-	/* Perform a basic test to see if there's actually any unit
-	 * running. */
-	if(p1(0L, config_buf) != 0)
-		{
-		ENGINEerr(ENGINE_F_ATALLA_INIT,ENGINE_R_UNIT_FAILURE);
-		goto err;
-		}
-	/* Everything's fine. */
-	return 1;
-err:
-	if(atalla_dso)
-		DSO_free(atalla_dso);
-	p_Atalla_GetHardwareConfig = NULL;
-	p_Atalla_RSAPrivateKeyOpFn = NULL;
-	p_Atalla_GetPerformanceStatistics = NULL;
-	return 0;
-	}
-
-static int atalla_finish()
-	{
-	if(atalla_dso == NULL)
-		{
-		ENGINEerr(ENGINE_F_ATALLA_FINISH,ENGINE_R_NOT_LOADED);
-		return 0;
-		}
-	if(!DSO_free(atalla_dso))
-		{
-		ENGINEerr(ENGINE_F_ATALLA_FINISH,ENGINE_R_DSO_FAILURE);
-		return 0;
-		}
-	atalla_dso = NULL;
-	p_Atalla_GetHardwareConfig = NULL;
-	p_Atalla_RSAPrivateKeyOpFn = NULL;
-	p_Atalla_GetPerformanceStatistics = NULL;
-	return 1;
-	}
-
-static int atalla_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *m, BN_CTX *ctx)
-	{
-	/* I need somewhere to store temporary serialised values for
-	 * use with the Atalla API calls. A neat cheat - I'll use
-	 * BIGNUMs from the BN_CTX but access their arrays directly as
-	 * byte arrays <grin>. This way I don't have to clean anything
-	 * up. */
-	BIGNUM *modulus;
-	BIGNUM *exponent;
-	BIGNUM *argument;
-	BIGNUM *result;
-	RSAPrivateKey keydata;
-	int to_return, numbytes;
-
-	modulus = exponent = argument = result = NULL;
-	to_return = 0; /* expect failure */
-
-	if(!atalla_dso)
-	{
-		ENGINEerr(ENGINE_F_ATALLA_MOD_EXP,ENGINE_R_NOT_LOADED);
-		goto err;
-	}
-	/* Prepare the params */
-	modulus = BN_CTX_get(ctx);
-	exponent = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if(!modulus || !exponent || !argument || !result)
-	{
-		ENGINEerr(ENGINE_F_ATALLA_MOD_EXP,ENGINE_R_BN_CTX_FULL);
-		goto err;
-	}
-	if(!bn_wexpand(modulus, m->top) || !bn_wexpand(exponent, m->top) ||
-	   !bn_wexpand(argument, m->top) || !bn_wexpand(result, m->top))
-	{
-		ENGINEerr(ENGINE_F_ATALLA_MOD_EXP,ENGINE_R_BN_EXPAND_FAIL);
-		goto err;
-	}
-	/* Prepare the key-data */
-	memset(&keydata, 0,sizeof keydata);
-	numbytes = BN_num_bytes(m);
-	memset(exponent->d, 0, numbytes);
-	memset(modulus->d, 0, numbytes);
-	BN_bn2bin(p, (unsigned char *)exponent->d + numbytes - BN_num_bytes(p));
-	BN_bn2bin(m, (unsigned char *)modulus->d + numbytes - BN_num_bytes(m));
-	keydata.privateExponent.data = (unsigned char *)exponent->d;
-	keydata.privateExponent.len = numbytes;
-	keydata.modulus.data = (unsigned char *)modulus->d;
-	keydata.modulus.len = numbytes;
-	/* Prepare the argument */
-	memset(argument->d, 0, numbytes);
-	memset(result->d, 0, numbytes);
-	BN_bn2bin(a, (unsigned char *)argument->d + numbytes - BN_num_bytes(a));
-	/* Perform the operation */
-	if(p_Atalla_RSAPrivateKeyOpFn(&keydata, (unsigned char *)result->d,
-			(unsigned char *)argument->d,
-			keydata.modulus.len) != 0)
-	{
-		ENGINEerr(ENGINE_F_ATALLA_MOD_EXP,ENGINE_R_REQUEST_FAILED);
-		goto err;
-	}
-	/* Convert the response */
-	BN_bin2bn((unsigned char *)result->d, numbytes, r);
-	to_return = 1;
-err:
-	if(modulus) ctx->tos--;
-	if(exponent) ctx->tos--;
-	if(argument) ctx->tos--;
-	if(result) ctx->tos--;
-	return to_return;
-	}
-
-static int atalla_rsa_mod_exp(BIGNUM *r0, BIGNUM *I, RSA *rsa)
-	{
-	BN_CTX *ctx = NULL;
-	int to_return = 0;
-
-	if(!atalla_dso)
-	{
-		ENGINEerr(ENGINE_F_ATALLA_RSA_MOD_EXP,ENGINE_R_NOT_LOADED);
-		goto err;
-	}
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!rsa->d || !rsa->n)
-		{
-		ENGINEerr(ENGINE_F_ATALLA_RSA_MOD_EXP,ENGINE_R_MISSING_KEY_COMPONENTS);
-		goto err;
-		}
-	to_return = atalla_mod_exp(r0, I, rsa->d, rsa->n, ctx);
-err:
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-	}
-
-/* This code was liberated and adapted from the commented-out code in
- * dsa_ossl.c. Because of the unoptimised form of the Atalla acceleration
- * (it doesn't have a CRT form for RSA), this function means that an
- * Atalla system running with a DSA server certificate can handshake
- * around 5 or 6 times faster/more than an equivalent system running with
- * RSA. Just check out the "signs" statistics from the RSA and DSA parts
- * of "openssl speed -engine atalla dsa1024 rsa1024". */
-static int atalla_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-		BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-		BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	BIGNUM t;
-	int to_return = 0;
- 
-	BN_init(&t);
-	/* let rr = a1 ^ p1 mod m */
-	if (!atalla_mod_exp(rr,a1,p1,m,ctx)) goto end;
-	/* let t = a2 ^ p2 mod m */
-	if (!atalla_mod_exp(&t,a2,p2,m,ctx)) goto end;
-	/* let rr = rr * t mod m */
-	if (!BN_mod_mul(rr,rr,&t,m,ctx)) goto end;
-	to_return = 1;
-end:
-	BN_free(&t);
-	return to_return;
-	}
-
-
-static int atalla_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx)
-	{
-	return atalla_mod_exp(r, a, p, m, ctx);
-	}
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int atalla_mod_exp_mont(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return atalla_mod_exp(r, a, p, m, ctx);
-	}
-
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int atalla_mod_exp_dh(DH *dh, BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return atalla_mod_exp(r, a, p, m, ctx);
-	}
-
-#endif /* !NO_HW_ATALLA */
-#endif /* !NO_HW */

crypto/engine/hw_cswift.c

@@ -1,807 +0,0 @@
-/* crypto/engine/hw_cswift.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-#include "engine_int.h"
-#include <openssl/engine.h>
-
-#ifndef NO_HW
-#ifndef NO_HW_CSWIFT
-
-/* Attribution notice: Rainbow have generously allowed me to reproduce
- * the necessary definitions here from their API. This means the support
- * can build independently of whether application builders have the
- * API or hardware. This will allow developers to easily produce software
- * that has latent hardware support for any users that have accelerators
- * installed, without the developers themselves needing anything extra.
- *
- * I have only clipped the parts from the CryptoSwift header files that
- * are (or seem) relevant to the CryptoSwift support code. This is
- * simply to keep the file sizes reasonable.
- * [Geoff]
- */
-#ifdef FLAT_INC
-#include "cswift.h"
-#else
-#include "vendor_defns/cswift.h"
-#endif
-
-static int cswift_init(void);
-static int cswift_finish(void);
-
-/* BIGNUM stuff */
-static int cswift_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
-static int cswift_mod_exp_crt(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *q, const BIGNUM *dmp1, const BIGNUM *dmq1,
-		const BIGNUM *iqmp, BN_CTX *ctx);
-
-/* RSA stuff */
-static int cswift_rsa_mod_exp(BIGNUM *r0, BIGNUM *I, RSA *rsa);
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int cswift_mod_exp_mont(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-/* DSA stuff */
-static DSA_SIG *cswift_dsa_sign(const unsigned char *dgst, int dlen, DSA *dsa);
-static int cswift_dsa_verify(const unsigned char *dgst, int dgst_len,
-				DSA_SIG *sig, DSA *dsa);
-
-/* DH stuff */
-/* This function is alised to mod_exp (with the DH and mont dropped). */
-static int cswift_mod_exp_dh(DH *dh, BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD cswift_rsa =
-	{
-	"CryptoSwift RSA method",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	cswift_rsa_mod_exp,
-	cswift_mod_exp_mont,
-	NULL,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL
-	};
-
-/* Our internal DSA_METHOD that we provide pointers to */
-static DSA_METHOD cswift_dsa =
-	{
-	"CryptoSwift DSA method",
-	cswift_dsa_sign,
-	NULL, /* dsa_sign_setup */
-	cswift_dsa_verify,
-	NULL, /* dsa_mod_exp */
-	NULL, /* bn_mod_exp */
-	NULL, /* init */
-	NULL, /* finish */
-	0, /* flags */
-	NULL /* app_data */
-	};
-
-/* Our internal DH_METHOD that we provide pointers to */
-static DH_METHOD cswift_dh =
-	{
-	"CryptoSwift DH method",
-	NULL,
-	NULL,
-	cswift_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-
-/* Our ENGINE structure. */
-static ENGINE engine_cswift =
-        {
-	"cswift",
-	"CryptoSwift hardware engine support",
-	&cswift_rsa,
-	&cswift_dsa,
-	&cswift_dh,
-	NULL,
-	cswift_mod_exp,
-	cswift_mod_exp_crt,
-	cswift_init,
-	cswift_finish,
-	NULL, /* no ctrl() */
-	NULL, /* no load_privkey() */
-	NULL, /* no load_pubkey() */
-	0, /* no flags */
-	0, 0, /* no references */
-	NULL, NULL /* unlinked */
-        };
-
-/* As this is only ever called once, there's no need for locking
- * (indeed - the lock will already be held by our caller!!!) */
-ENGINE *ENGINE_cswift()
-	{
-	RSA_METHOD *meth1;
-	DH_METHOD *meth2;
-
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the cswift-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1 = RSA_PKCS1_SSLeay();
-	cswift_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-	cswift_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	cswift_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
-	cswift_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
-
-	/* Much the same for Diffie-Hellman */
-	meth2 = DH_OpenSSL();
-	cswift_dh.generate_key = meth2->generate_key;
-	cswift_dh.compute_key = meth2->compute_key;
-	return &engine_cswift;
-	}
-
-/* This is a process-global DSO handle used for loading and unloading
- * the CryptoSwift library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-static DSO *cswift_dso = NULL;
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-t_swAcquireAccContext *p_CSwift_AcquireAccContext = NULL;
-t_swAttachKeyParam *p_CSwift_AttachKeyParam = NULL;
-t_swSimpleRequest *p_CSwift_SimpleRequest = NULL;
-t_swReleaseAccContext *p_CSwift_ReleaseAccContext = NULL;
-
-/* Used in the DSO operations. */
-static const char *CSWIFT_LIBNAME = "swift";
-static const char *CSWIFT_F1 = "swAcquireAccContext";
-static const char *CSWIFT_F2 = "swAttachKeyParam";
-static const char *CSWIFT_F3 = "swSimpleRequest";
-static const char *CSWIFT_F4 = "swReleaseAccContext";
-
-
-/* CryptoSwift library functions and mechanics - these are used by the
- * higher-level functions further down. NB: As and where there's no
- * error checking, take a look lower down where these functions are
- * called, the checking and error handling is probably down there. */
-
-/* utility function to obtain a context */
-static int get_context(SW_CONTEXT_HANDLE *hac)
-	{
-        SW_STATUS status;
- 
-        status = p_CSwift_AcquireAccContext(hac);
-        if(status != SW_OK)
-                return 0;
-        return 1;
-	}
- 
-/* similarly to release one. */
-static void release_context(SW_CONTEXT_HANDLE hac)
-	{
-        p_CSwift_ReleaseAccContext(hac);
-	}
-
-/* (de)initialisation functions. */
-static int cswift_init()
-	{
-        SW_CONTEXT_HANDLE hac;
-        t_swAcquireAccContext *p1;
-        t_swAttachKeyParam *p2;
-        t_swSimpleRequest *p3;
-        t_swReleaseAccContext *p4;
-
-	if(cswift_dso != NULL)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_INIT,ENGINE_R_ALREADY_LOADED);
-		goto err;
-		}
-	/* Attempt to load libswift.so/swift.dll/whatever. */
-	cswift_dso = DSO_load(NULL, CSWIFT_LIBNAME, NULL,
-		DSO_FLAG_NAME_TRANSLATION);
-	if(cswift_dso == NULL)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_INIT,ENGINE_R_DSO_FAILURE);
-		goto err;
-		}
-	if(!(p1 = (t_swAcquireAccContext *)
-				DSO_bind_func(cswift_dso, CSWIFT_F1)) ||
-			!(p2 = (t_swAttachKeyParam *)
-				DSO_bind_func(cswift_dso, CSWIFT_F2)) ||
-			!(p3 = (t_swSimpleRequest *)
-				DSO_bind_func(cswift_dso, CSWIFT_F3)) ||
-			!(p4 = (t_swReleaseAccContext *)
-				DSO_bind_func(cswift_dso, CSWIFT_F4)))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_INIT,ENGINE_R_DSO_FAILURE);
-		goto err;
-		}
-	/* Copy the pointers */
-	p_CSwift_AcquireAccContext = p1;
-	p_CSwift_AttachKeyParam = p2;
-	p_CSwift_SimpleRequest = p3;
-	p_CSwift_ReleaseAccContext = p4;
-	/* Try and get a context - if not, we may have a DSO but no
-	 * accelerator! */
-	if(!get_context(&hac))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_INIT,ENGINE_R_UNIT_FAILURE);
-		goto err;
-		}
-	release_context(hac);
-	/* Everything's fine. */
-	return 1;
-err:
-	if(cswift_dso)
-		DSO_free(cswift_dso);
-	p_CSwift_AcquireAccContext = NULL;
-	p_CSwift_AttachKeyParam = NULL;
-	p_CSwift_SimpleRequest = NULL;
-	p_CSwift_ReleaseAccContext = NULL;
-	return 0;
-	}
-
-static int cswift_finish()
-	{
-	if(cswift_dso == NULL)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_FINISH,ENGINE_R_NOT_LOADED);
-		return 0;
-		}
-	if(!DSO_free(cswift_dso))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_FINISH,ENGINE_R_DSO_FAILURE);
-		return 0;
-		}
-	cswift_dso = NULL;
-	p_CSwift_AcquireAccContext = NULL;
-	p_CSwift_AttachKeyParam = NULL;
-	p_CSwift_SimpleRequest = NULL;
-	p_CSwift_ReleaseAccContext = NULL;
-	return 1;
-	}
-
-/* Un petit mod_exp */
-static int cswift_mod_exp(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *m, BN_CTX *ctx)
-	{
-	/* I need somewhere to store temporary serialised values for
-	 * use with the CryptoSwift API calls. A neat cheat - I'll use
-	 * BIGNUMs from the BN_CTX but access their arrays directly as
-	 * byte arrays <grin>. This way I don't have to clean anything
-	 * up. */
-	BIGNUM *modulus;
-	BIGNUM *exponent;
-	BIGNUM *argument;
-	BIGNUM *result;
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg, res;
-	SW_PARAM sw_param;
-	SW_CONTEXT_HANDLE hac;
-	int to_return, acquired;
- 
-	modulus = exponent = argument = result = NULL;
-	to_return = 0; /* expect failure */
-	acquired = 0;
- 
-	if(!get_context(&hac))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP,ENGINE_R_GET_HANDLE_FAILED);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	modulus = BN_CTX_get(ctx);
-	exponent = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if(!modulus || !exponent || !argument || !result)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP,ENGINE_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(modulus, m->top) || !bn_wexpand(exponent, p->top) ||
-		!bn_wexpand(argument, a->top) || !bn_wexpand(result, m->top))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP,ENGINE_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_EXP;
-	sw_param.up.exp.modulus.nbytes = BN_bn2bin(m,
-		(unsigned char *)modulus->d);
-	sw_param.up.exp.modulus.value = (unsigned char *)modulus->d;
-	sw_param.up.exp.exponent.nbytes = BN_bn2bin(p,
-		(unsigned char *)exponent->d);
-	sw_param.up.exp.exponent.value = (unsigned char *)exponent->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP,
-			ENGINE_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		goto err;
-	default:
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg.nbytes = BN_bn2bin(a, (unsigned char *)argument->d);
-	arg.value = (unsigned char *)argument->d;
-	res.nbytes = BN_num_bytes(m);
-	memset(result->d, 0, res.nbytes);
-	res.value = (unsigned char *)result->d;
-	/* Perform the operation */
-	if((sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_MODEXP, &arg, 1,
-		&res, 1)) != SW_OK)
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	BN_bin2bn((unsigned char *)result->d, res.nbytes, r);
-	to_return = 1;
-err:
-	if(acquired)
-		release_context(hac);
-	if(modulus) ctx->tos--;
-	if(exponent) ctx->tos--;
-	if(argument) ctx->tos--;
-	if(result) ctx->tos--;
-	return to_return;
-	}
-
-/* Un petit mod_exp chinois */
-static int cswift_mod_exp_crt(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *q, const BIGNUM *dmp1,
-			const BIGNUM *dmq1, const BIGNUM *iqmp, BN_CTX *ctx)
-	{
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg, res;
-	SW_PARAM sw_param;
-	SW_CONTEXT_HANDLE hac;
-	BIGNUM *rsa_p = NULL;
-	BIGNUM *rsa_q = NULL;
-	BIGNUM *rsa_dmp1 = NULL;
-	BIGNUM *rsa_dmq1 = NULL;
-	BIGNUM *rsa_iqmp = NULL;
-	BIGNUM *argument = NULL;
-	BIGNUM *result = NULL;
-	int to_return = 0; /* expect failure */
-	int acquired = 0;
- 
-	if(!get_context(&hac))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP_CRT,ENGINE_R_GET_HANDLE_FAILED);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	rsa_p = BN_CTX_get(ctx);
-	rsa_q = BN_CTX_get(ctx);
-	rsa_dmp1 = BN_CTX_get(ctx);
-	rsa_dmq1 = BN_CTX_get(ctx);
-	rsa_iqmp = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if(!rsa_p || !rsa_q || !rsa_dmp1 || !rsa_dmq1 || !rsa_iqmp ||
-			!argument || !result)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP_CRT,ENGINE_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(rsa_p, p->top) || !bn_wexpand(rsa_q, q->top) ||
-			!bn_wexpand(rsa_dmp1, dmp1->top) ||
-			!bn_wexpand(rsa_dmq1, dmq1->top) ||
-			!bn_wexpand(rsa_iqmp, iqmp->top) ||
-			!bn_wexpand(argument, a->top) ||
-			!bn_wexpand(result, p->top + q->top))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP_CRT,ENGINE_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_CRT;
-	sw_param.up.crt.p.nbytes = BN_bn2bin(p, (unsigned char *)rsa_p->d);
-	sw_param.up.crt.p.value = (unsigned char *)rsa_p->d;
-	sw_param.up.crt.q.nbytes = BN_bn2bin(q, (unsigned char *)rsa_q->d);
-	sw_param.up.crt.q.value = (unsigned char *)rsa_q->d;
-	sw_param.up.crt.dmp1.nbytes = BN_bn2bin(dmp1,
-		(unsigned char *)rsa_dmp1->d);
-	sw_param.up.crt.dmp1.value = (unsigned char *)rsa_dmp1->d;
-	sw_param.up.crt.dmq1.nbytes = BN_bn2bin(dmq1,
-		(unsigned char *)rsa_dmq1->d);
-	sw_param.up.crt.dmq1.value = (unsigned char *)rsa_dmq1->d;
-	sw_param.up.crt.iqmp.nbytes = BN_bn2bin(iqmp,
-		(unsigned char *)rsa_iqmp->d);
-	sw_param.up.crt.iqmp.value = (unsigned char *)rsa_iqmp->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP_CRT,
-			ENGINE_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		goto err;
-	default:
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP_CRT,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg.nbytes = BN_bn2bin(a, (unsigned char *)argument->d);
-	arg.value = (unsigned char *)argument->d;
-	res.nbytes = 2 * BN_num_bytes(p);
-	memset(result->d, 0, res.nbytes);
-	res.value = (unsigned char *)result->d;
-	/* Perform the operation */
-	if((sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_MODEXP_CRT, &arg, 1,
-		&res, 1)) != SW_OK)
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_MOD_EXP_CRT,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	BN_bin2bn((unsigned char *)result->d, res.nbytes, r);
-	to_return = 1;
-err:
-	if(acquired)
-		release_context(hac);
-	if(rsa_p) ctx->tos--;
-	if(rsa_q) ctx->tos--;
-	if(rsa_dmp1) ctx->tos--;
-	if(rsa_dmq1) ctx->tos--;
-	if(rsa_iqmp) ctx->tos--;
-	if(argument) ctx->tos--;
-	if(result) ctx->tos--;
-	return to_return;
-	}
- 
-static int cswift_rsa_mod_exp(BIGNUM *r0, BIGNUM *I, RSA *rsa)
-	{
-	BN_CTX *ctx;
-	int to_return = 0;
-
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_RSA_MOD_EXP,ENGINE_R_MISSING_KEY_COMPONENTS);
-		goto err;
-		}
-	to_return = cswift_mod_exp_crt(r0, I, rsa->p, rsa->q, rsa->dmp1,
-		rsa->dmq1, rsa->iqmp, ctx);
-err:
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-	}
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int cswift_mod_exp_mont(BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return cswift_mod_exp(r, a, p, m, ctx);
-	}
-
-static DSA_SIG *cswift_dsa_sign(const unsigned char *dgst, int dlen, DSA *dsa)
-	{
-	SW_CONTEXT_HANDLE hac;
-	SW_PARAM sw_param;
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg, res;
-	unsigned char *ptr;
-	BN_CTX *ctx;
-	BIGNUM *dsa_p = NULL;
-	BIGNUM *dsa_q = NULL;
-	BIGNUM *dsa_g = NULL;
-	BIGNUM *dsa_key = NULL;
-	BIGNUM *result = NULL;
-	DSA_SIG *to_return = NULL;
-	int acquired = 0;
-
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!get_context(&hac))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_SIGN,ENGINE_R_GET_HANDLE_FAILED);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	dsa_p = BN_CTX_get(ctx);
-	dsa_q = BN_CTX_get(ctx);
-	dsa_g = BN_CTX_get(ctx);
-	dsa_key = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if(!dsa_p || !dsa_q || !dsa_g || !dsa_key || !result)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_SIGN,ENGINE_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(dsa_p, dsa->p->top) ||
-			!bn_wexpand(dsa_q, dsa->q->top) ||
-			!bn_wexpand(dsa_g, dsa->g->top) ||
-			!bn_wexpand(dsa_key, dsa->priv_key->top) ||
-			!bn_wexpand(result, dsa->p->top))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_SIGN,ENGINE_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_DSA;
-	sw_param.up.dsa.p.nbytes = BN_bn2bin(dsa->p,
-				(unsigned char *)dsa_p->d);
-	sw_param.up.dsa.p.value = (unsigned char *)dsa_p->d;
-	sw_param.up.dsa.q.nbytes = BN_bn2bin(dsa->q,
-				(unsigned char *)dsa_q->d);
-	sw_param.up.dsa.q.value = (unsigned char *)dsa_q->d;
-	sw_param.up.dsa.g.nbytes = BN_bn2bin(dsa->g,
-				(unsigned char *)dsa_g->d);
-	sw_param.up.dsa.g.value = (unsigned char *)dsa_g->d;
-	sw_param.up.dsa.key.nbytes = BN_bn2bin(dsa->priv_key,
-				(unsigned char *)dsa_key->d);
-	sw_param.up.dsa.key.value = (unsigned char *)dsa_key->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_SIGN,
-			ENGINE_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		goto err;
-	default:
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_SIGN,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg.nbytes = dlen;
-	arg.value = (unsigned char *)dgst;
-	res.nbytes = BN_num_bytes(dsa->p);
-	memset(result->d, 0, res.nbytes);
-	res.value = (unsigned char *)result->d;
-	/* Perform the operation */
-	sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_DSS_SIGN, &arg, 1,
-		&res, 1);
-	if(sw_status != SW_OK)
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_SIGN,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	ptr = (unsigned char *)result->d;
-	if((to_return = DSA_SIG_new()) == NULL)
-		goto err;
-	to_return->r = BN_bin2bn((unsigned char *)result->d, 20, NULL);
-	to_return->s = BN_bin2bn((unsigned char *)result->d + 20, 20, NULL);
-
-err:
-	if(acquired)
-		release_context(hac);
-	if(dsa_p) ctx->tos--;
-	if(dsa_q) ctx->tos--;
-	if(dsa_g) ctx->tos--;
-	if(dsa_key) ctx->tos--;
-	if(result) ctx->tos--;
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-	}
-
-static int cswift_dsa_verify(const unsigned char *dgst, int dgst_len,
-				DSA_SIG *sig, DSA *dsa)
-	{
-	SW_CONTEXT_HANDLE hac;
-	SW_PARAM sw_param;
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg[2], res;
-	unsigned long sig_result;
-	BN_CTX *ctx;
-	BIGNUM *dsa_p = NULL;
-	BIGNUM *dsa_q = NULL;
-	BIGNUM *dsa_g = NULL;
-	BIGNUM *dsa_key = NULL;
-	BIGNUM *argument = NULL;
-	int to_return = -1;
-	int acquired = 0;
-
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!get_context(&hac))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_VERIFY,ENGINE_R_GET_HANDLE_FAILED);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	dsa_p = BN_CTX_get(ctx);
-	dsa_q = BN_CTX_get(ctx);
-	dsa_g = BN_CTX_get(ctx);
-	dsa_key = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	if(!dsa_p || !dsa_q || !dsa_g || !dsa_key || !argument)
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_VERIFY,ENGINE_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(dsa_p, dsa->p->top) ||
-			!bn_wexpand(dsa_q, dsa->q->top) ||
-			!bn_wexpand(dsa_g, dsa->g->top) ||
-			!bn_wexpand(dsa_key, dsa->pub_key->top) ||
-			!bn_wexpand(argument, 40))
-		{
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_VERIFY,ENGINE_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_DSA;
-	sw_param.up.dsa.p.nbytes = BN_bn2bin(dsa->p,
-				(unsigned char *)dsa_p->d);
-	sw_param.up.dsa.p.value = (unsigned char *)dsa_p->d;
-	sw_param.up.dsa.q.nbytes = BN_bn2bin(dsa->q,
-				(unsigned char *)dsa_q->d);
-	sw_param.up.dsa.q.value = (unsigned char *)dsa_q->d;
-	sw_param.up.dsa.g.nbytes = BN_bn2bin(dsa->g,
-				(unsigned char *)dsa_g->d);
-	sw_param.up.dsa.g.value = (unsigned char *)dsa_g->d;
-	sw_param.up.dsa.key.nbytes = BN_bn2bin(dsa->pub_key,
-				(unsigned char *)dsa_key->d);
-	sw_param.up.dsa.key.value = (unsigned char *)dsa_key->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_VERIFY,
-			ENGINE_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		goto err;
-	default:
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_VERIFY,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg[0].nbytes = dgst_len;
-	arg[0].value = (unsigned char *)dgst;
-	arg[1].nbytes = 40;
-	arg[1].value = (unsigned char *)argument->d;
-	memset(arg[1].value, 0, 40);
-	BN_bn2bin(sig->r, arg[1].value + 20 - BN_num_bytes(sig->r));
-	BN_bn2bin(sig->s, arg[1].value + 40 - BN_num_bytes(sig->s));
-	res.nbytes = 4; /* unsigned long */
-	res.value = (unsigned char *)(&sig_result);
-	/* Perform the operation */
-	sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_DSS_VERIFY, arg, 2,
-		&res, 1);
-	if(sw_status != SW_OK)
-		{
-		char tmpbuf[20];
-		ENGINEerr(ENGINE_F_CSWIFT_DSA_VERIFY,ENGINE_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	to_return = ((sig_result == 0) ? 0 : 1);
-
-err:
-	if(acquired)
-		release_context(hac);
-	if(dsa_p) ctx->tos--;
-	if(dsa_q) ctx->tos--;
-	if(dsa_g) ctx->tos--;
-	if(dsa_key) ctx->tos--;
-	if(argument) ctx->tos--;
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-	}
-
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int cswift_mod_exp_dh(DH *dh, BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return cswift_mod_exp(r, a, p, m, ctx);
-	}
-
-#endif /* !NO_HW_CSWIFT */
-#endif /* !NO_HW */

crypto/engine/vendor_defns/atalla.h

@@ -1,61 +0,0 @@
-/* This header declares the necessary definitions for using the exponentiation
- * acceleration capabilities of Atalla cards. The only cryptographic operation
- * is performed by "ASI_RSAPrivateKeyOpFn" and this takes a structure that
- * defines an "RSA private key". However, it is really only performing a
- * regular mod_exp using the supplied modulus and exponent - no CRT form is
- * being used. Hence, it is a generic mod_exp function in disguise, and we use
- * it as such.
- *
- * Thanks to the people at Atalla for letting me know these definitions are
- * fine and that they can be reproduced here.
- *
- * Geoff.
- */
-
-typedef struct ItemStr
-	{
-	unsigned char *data;
-	int len;
-	} Item;
-
-typedef struct RSAPrivateKeyStr
-	{
-	void *reserved;
-	Item version;
-	Item modulus;
-	Item publicExponent;
-	Item privateExponent;
-	Item prime[2];
-	Item exponent[2];
-	Item coefficient;
-	} RSAPrivateKey;
-
-/* Predeclare the function pointer types that we dynamically load from the DSO.
- * These use the same names and form that Ben's original support code had (in
- * crypto/bn/bn_exp.c) unless of course I've inadvertently changed the style
- * somewhere along the way!
- */
-
-typedef int tfnASI_GetPerformanceStatistics(int reset_flag,
-					unsigned int *ret_buf);
-
-typedef int tfnASI_GetHardwareConfig(long card_num, unsigned int *ret_buf);
-
-typedef int tfnASI_RSAPrivateKeyOpFn(RSAPrivateKey * rsaKey,
-					unsigned char *output,
-					unsigned char *input,
-					unsigned int modulus_len);
-
-/* These are the static string constants for the DSO file name and the function
- * symbol names to bind to. Regrettably, the DSO name on *nix appears to be
- * "atasi.so" rather than something more consistent like "libatasi.so". At the
- * time of writing, I'm not sure what the file name on win32 is but clearly
- * native name translation is not possible (eg libatasi.so on *nix, and
- * atasi.dll on win32). For the purposes of testing, I have created a symbollic
- * link called "libatasi.so" so that we can use native name-translation - a
- * better solution will be needed. */
-static const char *ATALLA_LIBNAME = "atasi";
-static const char *ATALLA_F1 = "ASI_GetHardwareConfig";
-static const char *ATALLA_F2 = "ASI_RSAPrivateKeyOpFn";
-static const char *ATALLA_F3 = "ASI_GetPerformanceStatistics";
-