Targets build too fast.

Change scary wording.
Include extra libraries/flags.
2003-10-28 14:56:14 +00:00 · 2003-10-22 11:28:25 +00:00 · 2003-10-22 11:05:19 +00:00 · 2003-10-08 13:12:50 +00:00 · 2003-10-08 10:18:02 +00:00 · 2003-10-07 10:55:36 +00:00
1395 changed files with 294221 additions and 22197 deletions
--- a/.cvsignore
+++ b/.cvsignore
@@ -1,3 +1,4 @@
 openssl.pc
 Makefile.ssl
 MINFO
 makefile.one
@@ -13,3 +14,4 @@ cctest.c
 cctest.a
 libcrypto.so.*
 libssl.so.*
 libcrypto.sha1
--- a/3694
+++ b/3694
--- a/356
+++ b/356
@@ -10,7 +10,7 @@ use strict;
 # see INSTALL for instructions.
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-engine] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [fips] [debug] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
 # Options:
 #
@@ -38,6 +38,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
 # no-engine     do not compile in any engine code.
 # no-hw-xxx     do not compile support for specific crypto hardware.
 #               Generic OpenSSL-style methods relating to this support
 #               are always compiled but return NULL if the hardware
@@ -107,7 +108,6 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";
 my $x86_sol_asm="asm/bn86-sol.o asm/co86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
 my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
@@ -120,7 +120,7 @@ my $alpha_asm="::::::::";
 # -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
 # So the md5_locl.h file has an undef B_ENDIAN if sun is defined
-#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib
+#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags
 my %table=(
 # File 'TABLE' (created by 'make TABLE') contains the data from this list,
@@ -134,18 +134,22 @@ my %table=(
 # Our development configs
 "purify",	"purify gcc:-g -DPURIFY -Wall::(unknown)::-lsocket -lnsl::::",
-"debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
+"debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
-"debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::asm/bn86-elf.o asm/co86-elf.o",
+"debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -O2 -Wall -Wshadow -Werror -pipe::(unknown)::::asm/bn86-elf.o asm/co86-elf.o",
 "debug-ben-openbsd","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
 "debug-ben-openbsd-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
-"debug-ben-debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::::",
+"debug-ben-debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -g3 -O2 -Wall -Wshadow -Werror -pipe::(unknown)::::::",
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
 "debug-ben-fips-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DFIPS -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::asm/bn86-elf.o asm/co86-elf.o",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT:::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
-"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn",
-"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "dist",		"cc:-O::(unknown)::::::",
 # Basic configs that should work on any (32 and less bit) box
@@ -158,24 +162,25 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
-"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
@@ -195,17 +200,16 @@ my %table=(
 "linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
 # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
 # assisted with debugging of following two configs.
-"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::::",
+"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
-"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# !!!Folowing can't be even tested yet!!!
+# GCC 3.1 is a requirement
-#    We have to wait till 64-bit glibc for SPARC is operational!!!
+"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
 # Sunos configs, assuming sparc for the gcc one.
-##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):::DES_UNROLL:::",
+##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):SUNOS::DES_UNROLL:::",
-"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::",
+"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown):SUNOS::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::",
 #### IRIX 5.x configs
 # -mips2 flag is added by ./config when appropriate.
@@ -216,7 +220,7 @@ my %table=(
 # './Configure irix-[g]cc' manually.
 # -mips4 flag is added by ./config when appropriate.
 "irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # N64 ABI builds.
 "irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -254,24 +258,26 @@ my %table=(
 "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # 64bit PARISC for GCC without optimization, which seems to make problems.
 # Submitted by <ross.alexander@uk.neceur.com>
 "hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # IA-64 targets
-# I have no idea if this one actually works, feedback needed. <appro>
+"hpux-ia64-cc","cc:-Ae +DD32 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-ia64-cc","cc:-Ae +DD32 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
 # with debugging of the following config.
-"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
-"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Isn't the line below meaningless? HP-UX cc optimizes for host by default.
 # hpux-parisc1_0-cc with +DAportable flag would make more sense. <appro>
-"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
@@ -373,21 +379,26 @@ my %table=(
 "linux-pentium",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppro",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-k6",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mcpu=k6 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-pentium","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
-"debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
-"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
+"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
+"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
-"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
+"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-s390x", "gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG:::::::::::linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-s390x",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64-ecc",   "ecc:-DL_ENDIAN -DTERMIO -O2 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-x86_64", "gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL:asm/x86_64-gcc.o:::::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-sparc64","gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-ia64","gcc:-DL_ENDIAN -DTERMIOS -O -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64-cpp.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown):::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -395,7 +406,7 @@ my %table=(
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 # NCR MP-RAS UNIX ver 02.03.01
-"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl -lc89:${x86_gcc_des} ${x86_gcc_opts}:::",
 # QNX 4
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
@@ -406,35 +417,39 @@ my %table=(
 # Linux on ARM
 "linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # SCO/Caldera targets.
 #
 # Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
 # Now we only have blended unixware-* as it's the only one used by ./config.
 # If you want to optimize for particular microarchitecture, bypass ./config
 # and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
 # Note that not all targets include assembler support. Mostly because of
 # lack of motivation to support out-of-date platforms with out-of-date
 # compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
 # patiently assisted to debug most of it.
 #
 # UnixWare 2.0x fails destest with -O
-"unixware-2.0","cc:-DFILIO_H::-Kthread::-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
+"unixware-2.0","cc:-DFILIO_H -DNO_STRINGS_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
 "unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
 # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
 "sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # UnixWare 2.1
 "unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
 "unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 "unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread::-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 # UnixWare 7
 "unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # OpenUNIX 8
 "OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenUNIX-8-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenUNIX-8-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # IBM's AIX.
 "aix-cc",   "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DB_ENDIAN::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:aix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
-"aix43-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
 "aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn:aix-shared::-q64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",
 #
-# Cray T90 (SDSC)
+# Cray T90 and similar (SDSC)
 # It's Big-endian, but the algorithms work properly when B_ENDIAN is NOT
 # defined.  The T90 ints and longs are 8 bytes long, and apparently the
 # B_ENDIAN code assumes 4 byte ints.  Fortunately, the non-B_ENDIAN and
@@ -444,7 +459,10 @@ my %table=(
 #'Taking the address of a bit field is not allowed. '
 #'An expression with bit field exists as the operand of "sizeof" '
 # (written by Wayne Schroeder <schroede@SDSC.EDU>)
-"cray-t90-cc", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown):CRAY::SIXTY_FOUR_BIT_LONG DES_INT:::",
+#
 # j90 is considered the base machine type for unicos machines,
 # so this configuration is now called "cray-j90" ...
 "cray-j90", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown):CRAY::SIXTY_FOUR_BIT_LONG DES_INT:::",
 #
 # Cray T3E (Research Center Juelich, beckman@acl.lanl.gov)
@@ -461,18 +479,9 @@ my %table=(
 "dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown)::-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 # SCO 3 - Tim Rice <tim@multitalents.net>
 "sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
 # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
 # SCO cc.
 "sco5-cc",  "cc:-belf::(unknown)::-lsocket -lresolv -lnsl:${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-Kpic", # des options?
 "sco5-cc-pentium",  "cc:-Kpentium::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
 "sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC", # the SCO assembler doesn't seem to like our assembler files ...
 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
-"ReliantUNIX","cc:-KPIC -g -DTERMIOS -DB_ENDIAN::-Kthread:SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:reliantunix-shared::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"ReliantUNIX","cc:-KPIC -g -DTERMIOS -DB_ENDIAN::-Kthread:SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:reliantunix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "SINIX","cc:-O::(unknown):SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:RC4_INDEX RC4_CHAR:::",
 "SINIX-N","/usr/ucb/cc:-O2 -misaligned::(unknown)::-lucb:RC4_INDEX RC4_CHAR:::",
@@ -488,6 +497,7 @@ my %table=(
 # Windows NT, Microsoft Visual C++ 4.0
 "VC-NT","cl::::WINNT::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
 "VC-CE","cl::::WINCE::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
 "VC-WIN32","cl::::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
 "VC-WIN16","cl:::(unknown):WIN16::MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::",
 "VC-W31-16","cl:::(unknown):WIN16::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
@@ -495,34 +505,48 @@ my %table=(
 "VC-MSDOS","cl:::(unknown):MSDOS::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
 # Borland C++ 4.5
-"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX::::::::::win32",
+"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN::::::::::win32",
 "BC-16","bcc:::(unknown):WIN16::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",
-# Mingw32
+# MinGW
-# (Note: the real CFLAGS for Windows builds are defined by util/mk1mf.pl
+"mingw", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -mno-cygwin -Wall:::MINGW32:-mno-cygwin -lwsock32 -lgdi32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32::::.dll",
-# and its library files in util/pl/*)
+
-"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
+# UWIN 
 "UWIN", "cc:-DTERMIOS -DL_ENDIAN -O -Wall:::UWIN::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
-"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32:cygwin-shared:::.dll",
+"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32:cygwin-shared:::.dll",
 # DJGPP
 "DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::",
 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
-"ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown):::::::",
+"ultrix-cc","cc:-std1 -O -Olimit 2500 -DL_ENDIAN::(unknown):::::::",
 "ultrix-gcc","gcc:-O3 -DL_ENDIAN::(unknown):::::::",
 # K&R C is no longer supported; you need gcc on old Ultrix installations
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
 # Some OpenBSD from Bob Beck <beck@obtuse.com>
-"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-x86",  "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-alpha",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD",      "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-i386",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-m68k",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-m88k",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-mips",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-powerpc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-vax",		"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "OpenBSD-hppa",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 ##### MacOS X (a.k.a. Rhapsody or Darwin) setup
-"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
+"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX_RHAPSODY::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
-"darwin-ppc-cc","cc:-O3 -nostdinc -I/System/Library/Frameworks/System.framework/Headers -I/System/Library/Frameworks/System.frameworks/Headers/bsd -I/usr/include -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-ppc-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin-i386-cc","cc:-O3 -nostdinc -I/System/Library/Frameworks/System.framework/Headers -I/System/Library/Frameworks/System.frameworks/Headers/bsd -I/usr/include -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::::-fPIC",
+"darwin-i386-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 ##### A/UX
 "aux3-gcc","gcc:-O2 -DTERMIO::(unknown):AUX:-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
 ##### Sony NEWS-OS 4.x
 "newsos4-gcc","gcc:-O -DB_ENDIAN::(unknown):NEWS4:-lmld -liberty:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::",
@@ -535,11 +559,18 @@ my %table=(
 ##### VxWorks for various targets
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
 "vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
 "vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
 "vxworks-ppc860","ccppc:-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
 "vxworks-mipsle","ccmips:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r::::::::::::::::ranlibmips:",
 ##### Compaq Non-Stop Kernel (Tandem)
 "tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",
 );
-my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
+my @WinTargets=qw(VC-NT VC-CE VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS
-	BC-16 Mingw32 OS2-EMX);
+	BC-32 BC-16 Mingw32 OS2-EMX);
 my $idx = 0;
 my $idx_cc = $idx++;
@@ -564,6 +595,7 @@ my $idx_shared_cflag = $idx++;
 my $idx_shared_ldflag = $idx++;
 my $idx_shared_extension = $idx++;
 my $idx_ranlib = $idx++;
 my $idx_arflags = $idx++;
 my $prefix="";
 my $openssldir="";
@@ -599,6 +631,8 @@ my $rmd160_obj="";
 my $processor="";
 my $default_ranlib;
 my $perl;
 my $fips=0;
 my $debug=0;
 my $no_ssl2=0;
 my $no_ssl3=0;
@@ -621,9 +655,11 @@ my $openssl_thread_defines;
 my $openssl_sys_defines="";
 my $openssl_other_defines;
 my $libs;
 my $libkrb5="";
 my $target;
 my $options;
 my $symlink;
 my $make_depend=0;
 my %withargs=();
 my @argvcopy=@ARGV;
@@ -660,6 +696,11 @@ PROCESS_ARGS:
 			$flags .= "-DOPENSSL_NO_ASM ";
 			$openssl_other_defines .= "#define OPENSSL_NO_ASM\n";
 			}
 		elsif (/^no-err$/)
 		 	{
 			$flags .= "-DOPENSSL_NO_ERR ";
 			$openssl_other_defines .= "#define OPENSSL_NO_ERR\n";
 			}
 		elsif (/^no-hw-(.+)$/)
 			{
 			my $hw=$1;
@@ -682,7 +723,7 @@ PROCESS_ARGS:
 			{ $threads=1; }
 		elsif (/^no-shared$/)
 			{ $no_shared=1; }
-		elsif (/^shared$/)
+		elsif (/^shared$/ || /^-shared$/ || /^--shared$/)
 			{ $no_shared=0; }
 		elsif (/^no-zlib$/)
 			{ $zlib=0; }
@@ -710,6 +751,7 @@ PROCESS_ARGS:
 			$openssl_algorithm_defines .= "#define OPENSSL_NO_$algo\n";
 			if ($algo eq "RIJNDAEL")
 				{
 				push @skip, "aes";
 				$flags .= "-DOPENSSL_NO_AES ";
 				$depflags .= "-DOPENSSL_NO_AES ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_AES\n";
@@ -722,14 +764,6 @@ PROCESS_ARGS:
 				$depflags .= "-DOPENSSL_NO_MDC2 ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_MDC2\n";
 				}
 			if ($algo eq "EC" || $algo eq "SHA" || $algo eq "SHA1")
 				{
 				push @skip, "ecdsa";
 				$options .= " no-ecdsa";
 				$flags .= "-DOPENSSL_NO_ECDSA ";
 				$depflags .= "-DOPENSSL_NO_ECDSA ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_ECDSA\n";
 				}
 			if ($algo eq "MD5")
 				{
 				$no_md5 = 1;
@@ -772,6 +806,15 @@ PROCESS_ARGS:
 			}
 		elsif (/^386$/)
 			{ $processor=386; }
 		elsif (/^fips$/)
 			{
 			$fips=1;
 			$openssl_other_defines.="#define OPENSSL_FIPS\n";
 		        }
 		elsif (/^debug$/)
 			{
 			$debug=1;
 			}
 		elsif (/^rsaref$/)
 			{
 			# No RSAref support any more since it's not needed.
@@ -889,6 +932,7 @@ print "Configuring for $target\n";
 my $IsWindows=scalar grep /^$target$/,@WinTargets;
 $exe_ext=".exe" if ($target eq "Cygwin");
 $exe_ext=".exe" if ($target eq "DJGPP");
 $openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
 $prefix=$openssldir if $prefix eq "";
@@ -896,7 +940,7 @@ chop $openssldir if $openssldir =~ /\/$/;
 chop $prefix if $prefix =~ /\/$/;
 $openssldir=$prefix . "/ssl" if $openssldir eq "";
-$openssldir=$prefix . "/" . $openssldir if $openssldir !~ /^\//;
+$openssldir=$prefix . "/" . $openssldir if $openssldir !~ /(^\/|^[a-zA-Z]:[\\\/])/;
 print "IsWindows=$IsWindows\n";
@@ -912,11 +956,11 @@ my $bn_ops = $fields[$idx_bn_ops];
 my $bn_obj = $fields[$idx_bn_obj];
 my $des_obj = $fields[$idx_des_obj];
 my $bf_obj = $fields[$idx_bf_obj];
-my $md5_obj = $fields[$idx_md5_obj];
+$md5_obj = $fields[$idx_md5_obj];
-my $sha1_obj = $fields[$idx_sha1_obj];
+$sha1_obj = $fields[$idx_sha1_obj];
 my $cast_obj = $fields[$idx_cast_obj];
 my $rc4_obj = $fields[$idx_rc4_obj];
-my $rmd160_obj = $fields[$idx_rmd160_obj];
+$rmd160_obj = $fields[$idx_rmd160_obj];
 my $rc5_obj = $fields[$idx_rc5_obj];
 my $dso_scheme = $fields[$idx_dso_scheme];
 my $shared_target = $fields[$idx_shared_target];
@@ -924,6 +968,9 @@ my $shared_cflag = $fields[$idx_shared_cflag];
 my $shared_ldflag = $fields[$idx_shared_ldflag];
 my $shared_extension = $fields[$idx_shared_extension];
 my $ranlib = $fields[$idx_ranlib];
 my $arflags = $fields[$idx_arflags];
 my $no_shared_warn=0;
 $cflags="$flags$cflags" if ($flags ne "");
@@ -942,6 +989,17 @@ else
 	my ($lresolv, $lpath, $lext);
 	if ($withargs{"krb5-flavor"} =~ /^[Hh]eimdal$/)
 		{
 		die "Sorry, Heimdal is currently not supported\n";
 		}
 	##### HACK to force use of Heimdal.
 	##### WARNING: Since we don't really have adequate support for Heimdal,
 	#####          using this will break the build.  You'll have to make
 	#####          changes to the source, and if you do, please send
 	#####          patches to openssl-dev@openssl.org
 	if ($withargs{"krb5-flavor"} =~ /^force-[Hh]eimdal$/)
 		{
 		warn "Heimdal isn't really supported.  Your build WILL break\n";
 		warn "If you fix the problems, please send a patch to openssl-dev\@openssl.org\n";
 		$withargs{"krb5-dir"} = "/usr/heimdal"
 			if $withargs{"krb5-dir"} eq "";
 		$withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
@@ -974,7 +1032,7 @@ else
 			}
 		}
 	$withargs{"krb5-lib"} .= " -lresolv"
-		if ("$lresolv");
+		if ("$lresolv" ne "");
 	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
 		if $withargs{"krb5-include"} eq "" &&
 		   $withargs{"krb5-dir"} ne "";
@@ -1033,7 +1091,7 @@ else
 #		}
 	}	
-$lflags="$libs$lflags"if ($libs ne "");
+$lflags="$libs$lflags" if ($libs ne "");
 if ($no_asm)
 	{
@@ -1041,6 +1099,11 @@ if ($no_asm)
 	$sha1_obj=$md5_obj=$rmd160_obj="";
 	}
 if (!$no_shared)
 	{
 	$cast_obj="";	# CAST assembler is not PIC
 	}
 if ($threads)
 	{
 	$cflags=$thread_cflags;
@@ -1051,25 +1114,22 @@ if ($zlib)
 	{
 	$cflags = "-DZLIB $cflags";
 	$cflags = "-DZLIB_SHARED $cflags" if $zlib == 2;
-	$lflags = "$lflags -lz" if $zlib == 2;
+	$lflags = "$lflags -lz" if $zlib == 1;
 	}
 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
 my $shared_mark = "";
-if ($shared_target ne "")
+if ($shared_target eq "")
 	{
 	$no_shared_warn = 1 if !$no_shared;
 	$no_shared = 1;
 	}
 if (!$no_shared)
 	{
 	if ($shared_cflag ne "")
 		{
 		$cflags = "$shared_cflag $cflags";
 		}
 	if (!$no_shared)
 		{
 		#$shared_mark = "\$(SHARED_LIBS)";
 		}
 	}
 else
 	{
 	$no_shared = 1;
 	}
 if ($sys_id ne "")
@@ -1090,7 +1150,11 @@ if ($ranlib eq "")
 $bn_obj = $bn_asm unless $bn_obj ne "";
-$des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
+if ($fips)
 	{
 	$des_obj=$sha1_obj="";
 	}
 $des_obj=$des_enc	unless (!$fips && $des_obj =~ /\.o$/);
 $bf_obj=$bf_enc		unless ($bf_obj =~ /\.o$/);
 $cast_obj=$cast_enc	unless ($cast_obj =~ /\.o$/);
 $rc4_obj=$rc4_enc	unless ($rc4_obj =~ /\.o$/);
@@ -1111,6 +1175,16 @@ if ($rmd160_obj =~ /\.o$/)
 	$cflags.=" -DRMD160_ASM";
 	}
 if ($debug)
 	{
 	$cflags.=" -g";
 	$cflags=~s/-fomit-frame-pointer//;
 	}
 # "Stringify" the C flags string.  This permits it to be made part of a string
 # and works as well on command lines.
 $cflags =~ s/([\\\"])/\\\1/g;
 my $version = "unknown";
 my $major = "unknown";
 my $minor = "unknown";
@@ -1142,7 +1216,8 @@ if ($shlib_version_number =~ /(^[0-9]*)\.([0-9\.]*)/)
 	}
 open(IN,'<Makefile.org') || die "unable to read Makefile.org:$!\n";
-open(OUT,">$Makefile") || die "unable to create $Makefile:$!\n";
+unlink("$Makefile.new") || die "unable to remove old $Makefile.new:$!\n" if -e "$Makefile.new";
 open(OUT,">$Makefile.new") || die "unable to create $Makefile.new:$!\n";
 print OUT "### Generated automatically from Makefile.org by Configure.\n\n";
 my $sdirs=0;
 while (<IN>)
@@ -1187,6 +1262,7 @@ while (<IN>)
 	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
 	s/^PROCESSOR=.*/PROCESSOR= $processor/;
 	s/^RANLIB=.*/RANLIB= $ranlib/;
 	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
 	s/^PERL=.*/PERL= $perl/;
 	s/^KRB5_INCLUDES=.*/KRB5_INCLUDES=$withargs{"krb5-include"}/;
 	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
@@ -1196,18 +1272,28 @@ while (<IN>)
 	if ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*$/)
 		{
 		my $sotmp = $1;
-		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp/
+		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp/;
 		}
 	elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.dylib$/)
 		{
 		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.dylib/;
 		}
 	elsif ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*\.[^\.]*$/)
 		{
 		my $sotmp = $1;
 		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp.\$(SHLIB_MAJOR) .s$sotmp/;
 		}
 	elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.[^\.]*\.dylib$/)
 		{
 		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.\$(SHLIB_MAJOR).dylib .dylib/;
 		}
 	s/^SHARED_LDFLAGS=.*/SHARED_LDFLAGS=$shared_ldflag/;
 	print OUT $_."\n";
 	}
 close(IN);
 close(OUT);
 rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile;
 rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n";
 print "CC            =$cc\n";
 print "CFLAG         =$cflags\n";
@@ -1223,11 +1309,10 @@ print "SHA1_OBJ_ASM  =$sha1_obj\n";
 print "RMD160_OBJ_ASM=$rmd160_obj\n";
 print "PROCESSOR     =$processor\n";
 print "RANLIB        =$ranlib\n";
 print "ARFLAGS       =$arflags\n";
 print "PERL          =$perl\n";
 print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
 	if $withargs{"krb5-include"} ne "";
 print "LIBKRB5       =",$withargs{"krb5-lib"},"\n"
 	if $withargs{"krb5-lib"} ne "";
 my $des_ptr=0;
 my $des_risc1=0;
@@ -1278,7 +1363,8 @@ foreach (sort split(/\s+/,$bn_ops))
 	}
 open(IN,'<crypto/opensslconf.h.in') || die "unable to read crypto/opensslconf.h.in:$!\n";
-open(OUT,'>crypto/opensslconf.h') || die "unable to create crypto/opensslconf.h:$!\n";
+unlink("crypto/opensslconf.h.new") || die "unable to remove old crypto/opensslconf.h.new:$!\n" if -e "crypto/opensslconf.h.new";
 open(OUT,'>crypto/opensslconf.h.new') || die "unable to create crypto/opensslconf.h.new:$!\n";
 print OUT "/* opensslconf.h */\n";
 print OUT "/* WARNING: Generated automatically from opensslconf.h.in by Configure. */\n\n";
@@ -1372,6 +1458,8 @@ while (<IN>)
 	}
 close(IN);
 close(OUT);
 rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h";
 rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n";
 # Fix the date
@@ -1411,11 +1499,13 @@ if($IsWindows) {
 EOF
 	close(OUT);
 } else {
-	(system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?
+	my $make_command = "make -f Makefile.ssl PERL=\'$perl\'";
-		if $symlink;
+	my $make_targets = "";
-	### (system 'make depend') == 0 or exit $? if $depflags ne "";
+	$make_targets .= " links" if $symlink;
-	# Run "make depend" manually if you want to be able to delete
+	$make_targets .= " depend" if $depflags ne "" && $make_depend;
-	# the source code files of ciphers you left out.
+	$make_targets .= " gentests" if $symlink;
 	(system $make_command.$make_targets) == 0 or exit $?
 		if $make_targets ne "";
 	if ( $perl =~ m@^/@) {
 	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
 	    &dofile("apps/der_chop",$perl,'^#!/', '#!%s');
@@ -1425,7 +1515,16 @@ EOF
 	    &dofile("tools/c_rehash",'/usr/local/bin/perl','^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
 	    &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s');
 	    &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
-	}	    
+	}
 	if ($depflags ne "" && !$make_depend) {
 		print <<EOF;
 Since you've disabled at least one algorithm, you need to do the following
 before building:
 	make depend
 EOF
 	}
 }
 print <<EOF;
@@ -1440,6 +1539,16 @@ applications as the compiler options required on this system are not known.
 See file INSTALL for details if you need multi-threading.
 EOF
 print <<\EOF if ($no_shared_warn);
 You gave the option 'shared'.  Normally, that would give you shared libraries.
 Unfortunately, the OpenSSL configuration doesn't include shared library support
 for this platform yet, so it will pretend you gave the option 'no-shared'.  If
 you can inform the developpers (openssl-dev\@openssl.org) how to support shared
 libraries on this platform, they will at least look at it and try their best
 (but please first make sure you have tried with a current version of OpenSSL).
 EOF
 exit(0);
 sub usage
@@ -1516,7 +1625,7 @@ sub print_table_entry
 	my $bn_ops,my $bn_obj,my $des_obj,my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
 	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,
-	my $shared_ldflag,my $shared_extension,my $ranlib)=
+	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags)=
 	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 	print <<EOF
@@ -1544,6 +1653,7 @@ sub print_table_entry
 \$shared_ldflag = $shared_ldflag
 \$shared_extension = $shared_extension
 \$ranlib       = $ranlib
 \$arflags      = $arflags
 EOF
 	}
--- a/192
+++ b/192
@@ -9,6 +9,7 @@ OpenSSL  -  Frequently Asked Questions
 * Where can I get a compiled version of OpenSSL?
 * Why aren't tools like 'autoconf' and 'libtool' used?
 * What is an 'engine' version?
 * How do I check the authenticity of the OpenSSL distribution?
 [LEGAL] Legal questions
@@ -29,15 +30,22 @@ OpenSSL  -  Frequently Asked Questions
 * Why can't I use OpenSSL certificates with SSL client authentication?
 * Why does my browser give a warning about a mismatched hostname?
 * How do I install a CA certificate into a browser?
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
 [BUILD] Questions about building and testing OpenSSL
 * Why does the linker complain about undefined symbols?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
 * Why does the OpenSSL test fail with "bc: stack empty"?
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 * Why does the OpenSSL compilation fail on Win32 with VC++?
 * What is special about OpenSSL on Redhat?
 * Why does the OpenSSL compilation fail on MacOS X?
 * Why does the OpenSSL test suite fail on MacOS X?
 * Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
 * Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
 [PROG] Questions about programming with OpenSSL
@@ -51,6 +59,7 @@ OpenSSL  -  Frequently Asked Questions
 * Why can't the OpenSSH configure script detect OpenSSL?
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 * Why doesn't my server application receive a client certificate?
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
 ===============================================================================
@@ -59,7 +68,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6c was released on December 21st, 2001.
+OpenSSL 0.9.7c was released on September 30, 2003.
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -130,6 +139,19 @@ hardware. This was realized in a special release '0.9.6-engine'. With
 version 0.9.7 (not yet released) the changes were merged into the main
 development line, so that the special release is no longer necessary.
 * How do I check the authenticity of the OpenSSL distribution?
 We provide MD5 digests and ASC signatures of each tarball.
 Use MD5 to check that a tarball from a mirror site is identical:
   md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
 You can check authenticity using pgp or gpg. You need the OpenSSL team
 member public key used to sign it (download it from a key server). Then
 just do:
   pgp TARBALL.asc
 [LEGAL] =======================================================================
 * Do I need patent licenses to use OpenSSL?
@@ -167,18 +189,30 @@ for permission to use their software with OpenSSL.
 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" that serves this purpose.  On other systems, applications have
+device" (/dev/urandom or /dev/random) that serves this purpose.
-to call the RAND_add() or RAND_seed() function with appropriate data
+All OpenSSL versions try to use /dev/urandom by default; starting with
-before generating keys or performing public key encryption.
+version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
-(These functions initialize the pseudo-random number generator, PRNG.)
+available.
-Some broken applications do not do this.  As of version 0.9.5, the
+On other systems, applications have to call the RAND_add() or
-OpenSSL functions that need randomness report an error if the random
+RAND_seed() function with appropriate data before generating keys or
-number generator has not been seeded with at least 128 bits of
+performing public key encryption. (These functions initialize the
-randomness.  If this error occurs, please contact the author of the
+pseudo-random number generator, PRNG.)  Some broken applications do
-application you are using.  It is likely that it never worked
+not do this.  As of version 0.9.5, the OpenSSL functions that need
-correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
+randomness report an error if the random number generator has not been
-to perform potentially insecure encryption.
+seeded with at least 128 bits of randomness.  If this error occurs and
 is not discussed in the documentation of the application you are
 using, please contact the author of that application; it is likely
 that it never worked correctly.  OpenSSL 0.9.5 and later make the
 error visible by refusing to perform potentially insecure encryption.
 If you are using Solaris 8, you can add /dev/urandom and /dev/random
 devices by installing patch 112438 (Sparc) or 112439 (x86), which are
 available via the Patchfinder at <URL: http://sunsolve.sun.com>
 (Solaris 9 includes these devices by default). For /dev/random support
 for earlier Solaris versions, see Sun's statement at
 <URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
 (the SUNWski package is available in patch 105710).
 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -211,13 +245,6 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.
 For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
 installing the SUNski package from Sun patch 105710-01 (Sparc) which
 adds a /dev/random device and make sure it gets used, usually through
 $RANDFILE.  There are probably similar patches for the other Solaris
 versions.  However, be warned that /dev/random is usually a blocking
 device, which may have some effects on OpenSSL.
 * Why do I get an "unable to write 'random state'" error message?
@@ -343,6 +370,13 @@ DO NOT DO THIS! This command will give away your CAs private key and
 reduces its security to zero: allowing anyone to forge certificates in
 whatever name they choose.
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
 The ways to print out the oneline format of the DN (Distinguished Name) have
 been extended in version 0.9.7 of OpenSSL. Using the new X509_NAME_print_ex()
 interface, the "-nameopt" option could be introduded. See the manual
 page of the "openssl x509" commandline tool for details. The old behaviour
 has however been left as default for the sake of compatibility.
 [BUILD] =======================================================================
@@ -387,6 +421,17 @@ and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 * Why does the OpenSSL test fail with "bc: stack empty"?
 On some DG/ux versions, bc seems to have a too small stack for calculations
 that the OpenSSL bntest throws at it.  This gets triggered when you run the
 test suite (using "make test").  The message returned is "bc: stack empty".
 The best way to deal with this is to find another implementation of bc
 and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 On some Alpha installations running Tru64 Unix and Compaq C, the compilation
@@ -445,12 +490,104 @@ and then redo the compilation.  What you should really do is make sure
 Sometimes, you may get reports from VC++ command line (cl) that it
 can't find standard include files like stdio.h and other weirdnesses.
 One possible cause is that the environment isn't correctly set up.
-To solve that problem, one should run VCVARS32.BAT which is found in
+To solve that problem for VC++ versions up to 6, one should run
-the 'bin' subdirectory of the VC++ installation directory (somewhere
+VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
-under 'Program Files').  This needs to be done prior to running NMAKE,
+installation directory (somewhere under 'Program Files').  For VC++
-and the changes are only valid for the current DOS session.
+version 7 (and up?), which is also called VS.NET, the file is called
 VSVARS32.BAT instead.
 This needs to be done prior to running NMAKE, and the changes are only
 valid for the current DOS session.
 * What is special about OpenSSL on Redhat?
 Red Hat Linux (release 7.0 and later) include a preinstalled limited
 version of OpenSSL. For patent reasons, support for IDEA, RC5 and MDC2
 is disabled in this version. The same may apply to other Linux distributions.
 Users may therefore wish to install more or all of the features left out.
 To do this you MUST ensure that you do not overwrite the openssl that is in
 /usr/bin on your Red Hat machine. Several packages depend on this file,
 including sendmail and ssh. /usr/local/bin is a good alternative choice. The
 libraries that come with Red Hat 7.0 onwards have different names and so are
 not affected. (eg For Red Hat 7.2 they are /lib/libssl.so.0.9.6b and
 /lib/libcrypto.so.0.9.6b with symlinks /lib/libssl.so.2 and
 /lib/libcrypto.so.2 respectively).
 Please note that we have been advised by Red Hat attempting to recompile the
 openssl rpm with all the cryptography enabled will not work. All other
 packages depend on the original Red Hat supplied openssl package. It is also
 worth noting that due to the way Red Hat supplies its packages, updates to
 openssl on each distribution never change the package version, only the
 build number. For example, on Red Hat 7.1, the latest openssl package has
 version number 0.9.6 and build number 9 even though it contains all the
 relevant updates in packages up to and including 0.9.6b.
 A possible way around this is to persuade Red Hat to produce a non-US
 version of Red Hat Linux.
 FYI: Patent numbers and expiry dates of US patents:
 MDC-2: 4,908,861 13/03/2007
 IDEA:  5,214,703 25/05/2010
 RC5:   5,724,428 03/03/2015
 * Why does the OpenSSL compilation fail on MacOS X?
 If the failure happens when trying to build the "openssl" binary, with
 a large number of undefined symbols, it's very probable that you have
 OpenSSL 0.9.6b delivered with the operating system (you can find out by
 running '/usr/bin/openssl version') and that you were trying to build
 OpenSSL 0.9.7 or newer.  The problem is that the loader ('ld') in
 MacOS X has a misfeature that's quite difficult to go around.
 Look in the file PROBLEMS for a more detailed explanation and for possible
 solutions.
 * Why does the OpenSSL test suite fail on MacOS X?
 If the failure happens when running 'make test' and the RC4 test fails,
 it's very probable that you have OpenSSL 0.9.6b delivered with the
 operating system (you can find out by running '/usr/bin/openssl version')
 and that you were trying to build OpenSSL 0.9.6d.  The problem is that
 the loader ('ld') in MacOS X has a misfeature that's quite difficult to
 go around and has linked the programs "openssl" and the test programs
 with /usr/lib/libcrypto.dylib and /usr/lib/libssl.dylib instead of the
 libraries you just built.
 Look in the file PROBLEMS for a more detailed explanation and for possible
 solutions.
 * Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
 Failure in BN_sqr test is most likely caused by a failure to configure the
 toolkit for current platform or lack of support for the platform in question.
 Run './config -t' and './apps/openssl version -p'. Do these platform
 identifiers match? If they don't, then you most likely failed to run
 ./config and you're hereby advised to do so before filing a bug report.
 If ./config itself fails to run, then it's most likely problem with your
 local environment and you should turn to your system administrator (or
 similar). If identifiers match (and/or no alternative identifier is
 suggested by ./config script), then the platform is unsupported. There might
 or might not be a workaround. Most notably on SPARC64 platforms with GNU
 C compiler you should be able to produce a working build by running
 './config -m32'. I understand that -m32 might not be what you want/need,
 but the build should be operational. For further details turn to
 <openssl-dev@openssl.org>.
 * Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
 As of 0.9.7 assembler routines were overhauled for position independence
 of the machine code, which is essential for shared library support. For
 some reason OpenBSD is equipped with an out-of-date GNU assembler which
 finds the new code offensive. To work around the problem, configure with
 no-asm (and sacrifice a great deal of performance) or patch your assembler
 according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
 For your convenience a pre-compiled replacement binary is provided at
 <URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
 Reportedly elder *BSD a.out platforms also suffer from this problem and
 remedy should be same. Provided binary is statically linked and should be
 working across wider range of *BSD branches, not just OpenBSD.
 [PROG] ========================================================================
 * Is OpenSSL thread-safe?
@@ -595,6 +732,7 @@ The general answer is to check the config.log file generated when running
 the OpenSSH configure script. It should contain the detailed information
 on why the OpenSSL library was not detected or considered incompatible.
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 Yes; make sure to read the SSL_get_error(3) manual page!
@@ -616,5 +754,13 @@ if explicitly asked by the server. Use the SSL_VERIFY_PEER flag of the
 SSL_CTX_set_verify() function to enable the use of client certificates.
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
 For OpenSSL 0.9.7 the OID table was extended and corrected. In earlier
 versions, uniqueIdentifier was incorrectly used for X.509 certificates.
 The correct name according to RFC2256 (LDAP) is x500UniqueIdentifier.
 Change your code to use the new name when compiling against OpenSSL 0.9.7.
 ===============================================================================
--- a/52
+++ b/52
@@ -2,8 +2,10 @@
 INSTALLATION ON THE UNIX PLATFORM
 ---------------------------------
- [Installation on Windows, OpenVMS and MacOS (before MacOS X) is described
+ [Installation on DOS (with djgpp), Windows, OpenVMS and MacOS (before MacOS X)
-  in INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.]
+  is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.
  This document describes installation on operating systems in the Unix
  family.]
 To install OpenSSL, you will need:
@@ -137,8 +139,11 @@
     the failure that aren't problems in OpenSSL itself (like missing
     standard headers).  If it is a problem with OpenSSL itself, please
     report the problem to <openssl-bugs@openssl.org> (note that your
-     message will be forwarded to a public mailing list).  Include the
+     message will be recorded in the request tracker publicly readable
-     output of "make report" in your message.
+     via http://www.openssl.org/support/rt2.html and will be forwarded to a
     public mailing list). Include the output of "make report" in your message.
     Please check out the request tracker. Maybe the bug was already
     reported or has already been fixed.
     [If you encounter assembler error messages, try the "no-asm"
     configuration option as an immediate fix.]
@@ -153,10 +158,11 @@
     If a test fails, look at the output.  There may be reasons for
     the failure that isn't a problem in OpenSSL itself (like a missing
     or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAGS line
+     try removing any compiler optimization flags from the CFLAG line
     in Makefile.ssl and run "make clean; make". Please send a bug
     report to <openssl-bugs@openssl.org>, including the output of
-     "make report".
+     "make report" in order to be added to the request tracker at
     http://www.openssl.org/support/rt2.html.
  4. If everything tests ok, install OpenSSL with
@@ -290,3 +296,37 @@
 targets for shared library creation, like linux-shared.  Those targets
 can currently be used on their own just as well, but this is expected
 to change in future versions of OpenSSL.
 Note on random number generation
 --------------------------------
 Availability of cryptographically secure random numbers is required for
 secret key generation. OpenSSL provides several options to seed the
 internal PRNG. If not properly seeded, the internal PRNG will refuse
 to deliver random bytes and a "PRNG not seeded error" will occur.
 On systems without /dev/urandom (or similar) device, it may be necessary
 to install additional support software to obtain random seed.
 Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
 and the FAQ for more information.
 Note on support for multiple builds
 -----------------------------------
 OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
 support building for multiple platforms from the same source tree very well.
 It is however possible to build in a separate tree through the use of lots
 of symbolic links, which should be prepared like this:
 	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
 	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
 	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
 		mkdir -p `dirname $F`
 		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
 		echo $F '->' $OPENSSL_SOURCE/$F
 	done
 	make -f Makefile.org clean
 OPENSSL_SOURCE is an environment variable that contains the absolute (this
 is important!) path to the OpenSSL source tree.
 Also, operations like 'make update' should still be made in the source tree.
--- a/INSTALL.DJGPP
+++ b/INSTALL.DJGPP
@@ -0,0 +1,34 @@
 INSTALLATION ON THE DOS PLATFORM WITH DJGPP
 -------------------------------------------
 Openssl has been ported to DOS, but only with long filename support. If
 you wish to compile on native DOS with 8+3 filenames, you will have to
 tweak the installation yourself, including renaming files with illegal
 or duplicate names.
 You should have a full DJGPP environment installed, including the
 latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
 requires that PERL and BC also be installed.
 All of these can be obtained from the usual DJGPP mirror sites, such
 as "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to
 have the WATT-32 networking package installed before you try to compile
 openssl. This can be obtained from "http://www.bgnett.no/~giva/".
 The Makefile assumes that the WATT-32 code is in the directory
 specified by the environment variable WATT_ROOT. If you have watt-32
 in directory "watt32" under your main DJGPP directory, specify
 WATT_ROOT="/dev/env/DJDIR/watt32".
 To compile openssl, start your BASH shell. Then configure for DOS by
 running "./Configure" with appropriate arguments. The basic syntax for
 DOS is:
 ./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
 You may run out of DPMI selectors when running in a DOS box under
 Windows. If so, just close the BASH shell, go back to Windows, and
 restart BASH. Then run "make" again.
 Building openssl under DJGPP has been tested with DJGPP 2.03,
 GCC 2.952, GCC 2.953, perl 5.005_02 and perl 5.006_01.
--- a/INSTALL.OS2
+++ b/INSTALL.OS2
@@ -20,3 +20,12 @@
 If that finishes successfully you will find the libraries and programs in the
 "out" directory.
 Alternatively, you can make a dynamic build that puts the library code into
 crypto.dll and ssl.dll by running
 > make -f os2-emx-dll.mak
 This will build the above mentioned dlls and a matching pair of import
 libraries in the "out_dll" directory along with the set of test programs
 and the openssl application.
--- a/INSTALL.W32
+++ b/INSTALL.W32
@@ -2,19 +2,28 @@
 INSTALLATION ON THE WIN32 PLATFORM
 ----------------------------------
 [Instructions for building for Windows CE can be found in INSTALL.WCE]
 Heres a few comments about building OpenSSL in Windows environments.  Most
 of this is tested on Win32 but it may also work in Win 3.1 with some
 modification.
- You need Perl for Win32.  Unless you will build on CygWin32, you will need
+ You need Perl for Win32.  Unless you will build on Cygwin, you will need
 ActiveState Perl, available from http://www.activestate.com/ActivePerl.
 For CygWin32 users, there's more info in the CygWin32 section.
 and one of the following C compilers:
  * Visual C++
  * Borland C
-  * GNU C (Mingw32 or Cygwin32)
+  * GNU C (Cygwin or MinGW)
 If you are compiling from a tarball or a CVS snapshot then the Win32 files
 may well be not up to date. This may mean that some "tweaking" is required to
 get it all to work. See the trouble shooting section later on for if (when?)
 it goes wrong.
 Visual C++
 ----------
 If you want to compile in the assembly language routines with Visual C++ then
 you will need an assembler. This is worth doing because it will result in
@@ -24,26 +33,19 @@
  * Microsoft MASM (aka "ml")
  * Free Netwide Assembler NASM.
- MASM was at one point distributed with VC++. It is now distributed with some
+ MASM is distributed with most versions of VC++. For the versions where it is
- Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
+ not included in VC++, it is also distributed with some Microsoft DDKs, for
- you do not have either of these DDKs then you can just download the binaries
+ example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
- for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
+ either of these DDKs then you can just download the binaries for the Windows
- XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
+ 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
- DDKs can be downloaded from the Microsoft developers site www.msdn.com.
+ ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
 downloaded from the Microsoft developers site www.msdn.com.
 NASM is freely available. Version 0.98 was used during testing: other versions
 may also work. It is available from many places, see for example:
 http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
 The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
 If you are compiling from a tarball or a CVS snapshot then the Win32 files
 may well be not up to date. This may mean that some "tweaking" is required to
 get it all to work. See the trouble shooting section later on for if (when?)
 it goes wrong.
 Visual C++
 ----------
 Firstly you should run Configure:
 > perl Configure VC-WIN32
@@ -81,8 +83,9 @@
 There are various changes you can make to the Win32 compile environment. By
 default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mk.pl lines in the do_* batch file then debugging symbols will be
+ to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
- compiled in.
+ compiled in. Note that mk1mf.pl expects the platform to be the last argument
 on the command line, so 'debug' must appear before that, as all other options.
 The default Win32 environment is to leave out any Windows NT specific
 features.
@@ -94,6 +97,18 @@
 You can also build a static version of the library using the Makefile
 ms\nt.mak
 Borland C++ builder 5
 ---------------------
 * Configure for building with Borland Builder:
   > perl Configure BC-32
 * Create the appropriate makefile
   > ms\do_nasm
 * Build
   > make -f ms\bcb.mak
 Borland C++ builder 3 and 4
 ---------------------------
@@ -104,18 +119,72 @@
 * Run make:
   > make -f bcb.mak
- GNU C (Mingw32)
+ GNU C (Cygwin)
- ---------------
+ --------------
- To build OpenSSL, you need the Mingw32 package and GNU make.
+ Cygwin provides a bash shell and GNU tools environment running
 on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
 Consequently, a make of OpenSSL with Cygwin is closer to a GNU
 bash environment such as Linux than to other the other Win32
 makes.
 Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
 It is also possible to create Win32 binaries that only use the
 Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
 MinGW. MinGW can be used in the Cygwin development environment
 or in a standalone setup as described in the following section.
 To build OpenSSL using Cygwin:
 * Install Cygwin (see http://cygwin.com/)
 * Install Perl and ensure it is in the path. Both Cygwin perl
   (5.6.1-2 or newer) and ActivePerl work.
 * Run the Cygwin bash shell
 * $ tar zxvf openssl-x.x.x.tar.gz
   $ cd openssl-x.x.x
   To build the Cygwin version of OpenSSL:
   $ ./config
   [...]
   $ make
   [...]
   $ make test
   $ make install
   This will create a default install in /usr/local/ssl.
   To build the MinGW version (native Windows) in Cygwin:
   $ ./Configure mingw
   [...]
   $ make
   [...]
   $ make test
   $ make install
 Cygwin Notes:
 "make test" and normal file operations may fail in directories
 mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
 stripping of carriage returns. To avoid this ensure that a binary
 mount is used, e.g. mount -b c:\somewhere /home.
 "bc" is not provided in older Cygwin distribution.  This causes a
 non-fatal error in "make test" but is otherwise harmless.  If
 desired and needed, GNU bc can be built with Cygwin without change.
 GNU C (MinGW)
 -------------
 * Compiler installation:
-   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
+   MinGW is available from http://www.mingw.org. Run the installer and
-   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. GNU make is at
+   set the MinGW bin directory to the PATH in "System Properties" or
-   <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/
+   autoexec.bat.
   make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run
   C:\egcs-1.1.2\mingw32.bat to set the PATH.
 * Compile OpenSSL:
@@ -137,58 +206,11 @@
   > cd out
   > ..\ms\test
 GNU C (CygWin32)
 ---------------
 CygWin32 provides a bash shell and GNU tools environment running on
 NT 4.0, Windows 9x and Windows 2000. Consequently, a make of OpenSSL
 with CygWin is closer to a GNU bash environment such as Linux rather
 than other W32 makes that are based on a single makefile approach.
 CygWin32 implements Posix/Unix calls through cygwin1.dll, and is
 contrasted to Mingw32 which links dynamically to msvcrt.dll or
 crtdll.dll.
 To build OpenSSL using CygWin32:
 * Install CygWin32 (see http://sourceware.cygnus.com/cygwin)
 * Install Perl and ensure it is in the path (recent Cygwin perl 
   (version 5.6.1-2 of the latter has been reported to work) or
   ActivePerl)
 * Run the CygWin bash shell
 * $ tar zxvf openssl-x.x.x.tar.gz
   $ cd openssl-x.x.x
   $ ./Configure no-threads CygWin32
   [...]
   $ make
   [...]
   $ make test
   $ make install
 This will create a default install in /usr/local/ssl.
 CygWin32 Notes:
 "make test" and normal file operations may fail in directories
 mounted as text (i.e. mount -t c:\somewhere /home) due to CygWin
 stripping of carriage returns. To avoid this ensure that a binary
 mount is used, e.g. mount -b c:\somewhere /home.
 As of version 1.1.1 CygWin32 is relatively unstable in its handling
 of cr/lf issues. These make procedures succeeded with versions 1.1 and
 the snapshot 20000524 (Slow!).
 "bc" is not provided in the CygWin32 distribution.  This causes a
 non-fatal error in "make test" but is otherwise harmless.  If
 desired, GNU bc can be built with CygWin32 without change.
 Installation
 ------------
- If you used the CygWin procedure above, you have already installed and
+ If you used the Cygwin procedure above, you have already installed and
 can skip this section.  For all other procedures, there's currently no real
 installation procedure for Win32.  There are, however, some suggestions:
@@ -203,7 +225,7 @@
 	$ md c:\openssl\lib
 	$ md c:\openssl\include
 	$ md c:\openssl\include\openssl
-	$ copy /b inc32\*               c:\openssl\include\openssl
+	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
 	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
 	$ copy /b out32dll\libeay32.lib c:\openssl\lib
 	$ copy /b out32dll\ssleay32.dll c:\openssl\bin
--- a/INSTALL.WCE
+++ b/INSTALL.WCE
@@ -0,0 +1,71 @@
 INSTALLATION FOR THE WINDOWS CE PLATFORM
 ----------------------------------------
 Building OpenSSL for Windows CE requires the following external tools:
  * Microsoft eMbedded Visual C++ 3.0
  * wcecompat compatibility library (www.essemer.com.au)
  * Optionally ceutils for running automated tests (www.essemer.com.au)
 You also need Perl for Win32.  You will need ActiveState Perl, available
 from http://www.activestate.com/ActivePerl.
 Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
 issues should be directed to www.essemer.com.au.
 The C Runtime Library implementation for Windows CE that is included with
 Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
 incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
 CRT to a level that is more compatible with ANSI C.  wcecompat goes further
 and provides low-level IO and stream IO support for stdin/stdout/stderr
 (which Windows CE does not provide).  This IO functionality is not needed
 by the OpenSSL library itself but is used for the tests and openssl.exe.
 More information is available at www.essemer.com.au.
 Building
 --------
 Setup the eMbedded Visual C++ environment.  There are batch files for doing
 this installed with eVC++.  For an ARM processor, for example, execute:
 > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
 Next indicate where wcecompat is located:
 > set WCECOMPAT=C:\wcecompat
 Next you should run Configure:
 > perl Configure VC-CE
 Next you need to build the Makefiles:
 > ms\do_ms
 If you get errors about things not having numbers assigned then check the
 troubleshooting section in INSTALL.W32: you probably won't be able to compile
 it as it stands.
 Then from the VC++ environment at a prompt do:
 - to build static libraries:
   > nmake -f ms\ce.mak
 - or to build DLLs:
   > nmake -f ms\cedll.mak
 If all is well it should compile and you will have some static libraries and
 executables in out32, or some DLLs and executables in out32dll.  If you want
 to try the tests then make sure the ceutils are in the path and do:
 > cd out32
 > ..\ms\testce
 This will copy each of the test programs to the Windows CE device and execute
 them, displaying the output of the tests on this computer.  The output should
 look similar to the output produced by running the tests for a regular Windows
 build.
--- a/2
+++ b/2
@@ -12,7 +12,7 @@
  ---------------
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
--- a/MacOS/GetHTTPS.src/MacSocket.cpp
+++ b/MacOS/GetHTTPS.src/MacSocket.cpp
@@ -1287,7 +1287,7 @@ EXITPOINT:
 //	Send some bytes
-int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength)
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength)
 {
 OSErr			errCode = noErr;
 int				bytesSent = 0;
@@ -1604,4 +1604,4 @@ EPInfo* epi = (EPInfo*) context;
 		}
 	}
 }
-*/
+*/
--- a/MacOS/GetHTTPS.src/MacSocket.h
+++ b/MacOS/GetHTTPS.src/MacSocket.h
@@ -62,7 +62,7 @@ int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const B
 //	Call this to send data on a socket
-int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength);
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);
 //	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close
--- a/Makefile.org
+++ b/Makefile.org
@@ -15,6 +15,11 @@ OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=
 # HERE indicates where this Makefile lives.  This can be used to indicate
 # where sub-Makefiles are expected to be.  Currently has very limited usage,
 # and should probably not be bothered with at all.
 HERE=.
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -59,13 +64,22 @@ DEPFLAG=
 PEX_LIBS= 
 EX_LIBS= 
 EXE_EXT= 
-AR=ar r
+ARFLAGS=
 AR=ar $(ARFLAGS) r
 RANLIB= ranlib
 PERL= perl
 TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
 # We let the C compiler driver to take care of .s files. This is done in
 # order to be excused from maintaining a separate set of architecture
 # dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
 # gcc, then the driver will automatically translate it to -xarch=v8plus
 # and pass it down to assembler.
 AS=$(CC) -c
 ASFLAG=$(CFLAG)
 # Set BN_ASM to bn_asm.o if you want to use the C version
 BN_ASM= bn_asm.o
 #BN_ASM= bn_asm.o
@@ -159,17 +173,19 @@ LIBKRB5=
 # we might set SHLIB_MARK to '$(SHARED_LIBS)'.
 SHLIB_MARK=
-DIRS=   crypto ssl $(SHLIB_MARK) apps test tools
+DIRS=   crypto fips ssl $(SHLIB_MARK) sigs apps test tools
-SHLIBDIRS= crypto ssl
+SHLIBDIRS= fips crypto ssl
 # dirs in crypto to build
-SDIRS=  \
+SDIRS=  objects \
 	md2 md4 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn ec rsa dsa ecdsa dh dso engine aes \
+	bn ec rsa dsa dh dso engine aes \
-	buffer bio stack lhash rand err objects \
+	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
 FDIRS=	sha1 rand des aes dsa rsa
 # tests to perform.  "alltests" is a special word indicating that all tests
 # should be performed.
 TESTS = alltests
@@ -180,6 +196,7 @@ MAKE=     make -f Makefile.ssl
 MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
 MANSUFFIX=
 SHELL=/bin/sh
 TOP=    .
@@ -187,6 +204,7 @@ ONEDIRS=out tmp
 EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
 WDIRS=  windows
 LIBS=   libcrypto.a libssl.a
 SIGS=	libcrypto.sha1
 SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
 SHARED_SSL=libssl$(SHLIB_EXT)
 SHARED_LIBS=
@@ -204,14 +222,31 @@ HEADER=         e_os.h
 # When we're prepared to use shared libraries in the programs we link here
 # we might remove 'clean-shared' from the targets to perform at this stage
-all: Makefile.ssl sub_all
+all: Makefile.ssl sub_all openssl.pc
 sigs:	$(SIGS)
 libcrypto.sha1: libcrypto.a
 	if egrep 'define OPENSSL_FIPS' $(TOP)/include/openssl/opensslconf.h > /dev/null; then \
 		fips/sha1/fips_standalone_sha1 libcrypto.a > libcrypto.sha1; \
 	fi
 sub_all:
 	@for i in $(DIRS); \
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' FDIRS='$(FDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; \
 	done;
 sub_target:
 	@for i in $(DIRS); \
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making $(TARGET) in $$i..." && \
 		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' FDIRS='$(FDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TARGET='$(TARGET)' sub_target ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; \
@@ -241,7 +276,7 @@ clean-shared:
 		fi; \
 		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
 		if [ "$(PLATFORM)" = "Cygwin" ]; then \
-			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+			( set -x; rm -f cyg$$i-$(SHLIB_VERSION_NUMBER)$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
 		fi; \
 	done
@@ -251,7 +286,8 @@ link-shared:
 		for i in $(SHLIBDIRS); do \
 			prev=lib$$i$(SHLIB_EXT); \
 			for j in $${tmp:-x}; do \
-				( set -x; ln -f -s $$prev lib$$i$$j ); \
+				( set -x; \
 				rm -f lib$$i$$j; ln -s $$prev lib$$i$$j ); \
 				prev=lib$$i$$j; \
 			done; \
 		done; \
@@ -263,39 +299,45 @@ do_bsd-gcc-shared: do_gnu-shared
 do_linux-shared: do_gnu-shared
 do_gnu-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 		libs="$(LIBKRB5) $$libs"; \
 	fi; \
 	( set -x; ${CC} ${SHARED_LDFLAGS} \
 		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
-DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
+DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
 	collect2=`gcc -print-prog-name=collect2 2>&1` && \
 	[ -n "$$collect2" ] && \
 	my_ld=`$$collect2 --help 2>&1 | grep Usage: | sed 's/^Usage: *\([^ ][^ ]*\).*/\1/'` && \
 	[ -n "$$my_ld" ] && \
 	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
 # For Darwin AKA Mac OS/X (dyld)
 do_darwin-shared: 
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x ; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 		libs="$(LIBKRB5) $$libs"; \
 	fi; \
 	( set -x; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
 		lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \
 		-install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \
-	libs="$$libs -l`basename $$i${SHLIB_EXT} .dylib`"; \
+	libs="-l`basename $$i${SHLIB_EXT} .dylib` $$libs"; \
 	echo "" ; \
 	done
 do_cygwin-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x; ${CC}  -shared -o cyg$$i.dll \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 		libs="$(LIBKRB5) $$libs"; \
 	fi; \
 	( set -x; ${CC}  -shared -o cyg$$i-$(SHLIB_VERSION_NUMBER).dll \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--out-implib,lib$$i.dll.a \
 		-Wl,--no-whole-archive $$libs ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 # This assumes that GNU utilities are *not* used
@@ -304,11 +346,14 @@ do_alpha-osf1-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
@@ -320,11 +365,14 @@ do_tru64-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
@@ -336,12 +384,15 @@ do_tru64-shared-rpath:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-rpath  ${INSTALLTOP}/lib \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
@@ -352,12 +403,18 @@ do_solaris-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
-		  set -x; ${CC} ${SHARED_LDFLAGS} \
+		  MINUSZ='-z '; \
-			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		  (${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
 		  set -x; ${CC} ${SHARED_LDFLAGS} -G -dy -z text \
 			-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
+			$${MINUSZ}allextract lib$$i.a $${MINUSZ}defaultextract \
-		libs="$$libs -l$$i"; \
+			$$libs ${EX_LIBS} -lc ) || exit 1; \
 		libs="-l$$i $$libs"; \
 		done; \
 	fi
@@ -367,16 +424,20 @@ do_svr3-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
 		  for obj in `ar t lib$$i.a` ; do \
-		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		    OBJS="$${OBJS} `grep /$$obj allobjs`" ; \
 		  done ; \
-		  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		  set -x; ${CC} ${SHARED_LDFLAGS} \
 			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
@@ -386,17 +447,23 @@ do_svr5-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  SHARE_FLAG='-G'; \
 		  (${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
 		  for obj in `ar t lib$$i.a` ; do \
-		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		    OBJS="$${OBJS} `grep /$$obj allobjs`" ; \
 		  done ; \
-		  set -x; ${CC} ${SHARED_LDFLAGS} \
+		  set -x; LD_LIBRARY_PATH=.:$$LD_LIBRARY_PATH \
-			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			${CC} ${SHARED_LDFLAGS} \
 			$${SHARE_FLAG} -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
@@ -406,11 +473,14 @@ do_irix-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
@@ -427,12 +497,16 @@ do_irix-shared:
 #
 do_hpux-shared:
 	for i in ${SHLIBDIRS}; do \
 	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 		libs="$(LIBKRB5) $$libs"; \
 	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
- 		+vnocompatwarnings \
+		+vnocompatwarnings \
 		-b -z +s \
 		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Fl lib$$i.a -ldld -lc ) || exit 1; \
 	chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
 	done
 # This assumes that GNU utilities are *not* used
@@ -446,11 +520,15 @@ do_hpux-shared:
 #
 do_hpux64-shared:
 	for i in ${SHLIBDIRS}; do \
 	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 		libs="$(LIBKRB5) $$libs"; \
 	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
- 		-b -z \
+		-b -z \
 		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		+forceload lib$$i.a -ldl -lc ) || exit 1; \
 	chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
 	done
 # The following method is said to work on all platforms.  Tests will
@@ -487,17 +565,24 @@ SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE
 SHAREDCMD=$(CC)
 do_aix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 		libs="$(LIBKRB5) $$libs"; \
 	fi; \
 	( set -x; \
-	  ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
+	  ld -r -o lib$$i.o $(ALLSYMSFLAG) lib$$i.a && \
 	  ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
-	    $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
+	    $(SHAREDCMD) $(SHAREDFLAGS) \
 		-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} lib$$i.o \
 		$$libs ${EX_LIBS} ) ) \
 	|| exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 do_reliantunix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 		libs="$(LIBKRB5) $$libs"; \
 	fi; \
 	tmpdir=/tmp/openssl.$$$$ ; rm -rf $$tmpdir ; \
 	( set -x; \
 	  ( Opwd=`pwd` ; mkdir $$tmpdir || exit 1; \
@@ -507,19 +592,32 @@ do_reliantunix-shared:
 	  cp $$tmpdir/lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} . ; \
 	) || exit 1; \
 	rm -rf $$tmpdir ; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 openssl.pc: Makefile.ssl
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
 	    echo 'libdir=$${exec_prefix}/lib'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
 	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(LIBKRB5) $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 Makefile.ssl: Makefile.org
 	@echo "Makefile.ssl is older than Makefile.org."
 	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
 	@false
 libclean:
-	rm -f *.a */lib */*/lib
+	rm -f *.map *.so *.so.* engines/*.so *.a */lib */*/lib
-clean:
+clean:	libclean
-	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
 	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
@@ -528,7 +626,8 @@ clean:
 		rm -f $(LIBS); \
 	fi; \
 	done;
-	rm -f *.a *.o speed.* *.map *.so .pure core
+	rm -f openssl.pc
 	rm -f speed.* .pure
 	rm -f $(TARFILE)
 	@for i in $(ONEDIRS) ;\
 	do \
@@ -560,6 +659,10 @@ links:
 	fi; \
 	done;
 gentests:
 	@(cd test && echo "generating dummy tests (if needed)..." && \
 	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
 dclean:
 	rm -f *.bak
 	@for i in $(DIRS) ;\
@@ -574,8 +677,12 @@ rehash: rehash.time
 rehash.time: certs
 	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
-		LD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
+		LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
-		export LD_LIBRARY_PATH SHLIB_PATH LIBPATH; \
+		DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
 		SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
 		LIBPATH="`pwd`:$$LIBPATH"; \
 		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)
 	touch rehash.time
@@ -583,10 +690,14 @@ test:   tests
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' OPENSSL_DEBUG_MEMORY=on tests );
+	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	@LD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
+	@LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
-		export LD_LIBRARY_PATH SHLIB_PATH LIBPATH; \
+	DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
-		apps/openssl version -a
+	SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
 	LIBPATH="`pwd`:$$LIBPATH"; \
 	if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 	export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 	apps/openssl version -a
 report:
 	@$(PERL) util/selftest.pl
@@ -596,7 +707,7 @@ depend:
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dependencies $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' depend ) || exit 1; \
+		$(MAKE) SDIRS='${SDIRS}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ) || exit 1; \
 	fi; \
 	done;
@@ -642,18 +753,27 @@ TABLE: Configure
 update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h TABLE
 # Build distribution tar-file. As the list of files returned by "find" is
 # pretty long, on several platforms a "too many arguments" error or similar
 # would occur. Therefore the list of files is temporarily stored into a file
 # and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
 # tar does not support the --files-from option.
 tar:
-	@$(TAR) $(TARFLAGS) -cvf - \
+	find . -type d -print | xargs chmod 755
-		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort` |\
+	find . -type f -print | xargs chmod a+r
 	find . -type f -perm -0100 -print | xargs chmod a+x
 	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
 	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
 	tardy --user_number=0  --user_name=openssl \
 	      --group_number=0 --group_name=openssl \
 	      --prefix=openssl-$(VERSION) - |\
 	gzip --best >../$(TARFILE).gz; \
 	rm -f ../$(TARFILE).list; \
 	ls -l ../$(TARFILE).gz
 tar-snap:
 	@$(TAR) $(TARFLAGS) -cvf - \
-		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' | sort` |\
+		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
 	tardy --user_number=0  --user_name=openssl \
 	      --group_number=0 --group_name=openssl \
 	      --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
@@ -663,7 +783,7 @@ dist:
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
 	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) tar
+	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
 dist_pem_h:
 	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
@@ -671,6 +791,7 @@ dist_pem_h:
 install: all install_docs
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
@@ -692,11 +813,12 @@ install: all install_docs
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-		fi \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
-	done
+		fi; \
 	done;
 	@if [ -n "$(SHARED_LIBS)" ]; then \
 		tmp="$(SHARED_LIBS)"; \
 		for i in $${tmp:-x}; \
@@ -704,21 +826,41 @@ install: all install_docs
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib/cyg/'`; \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
-					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
-			fi \
+			fi; \
 		done; \
 		(	here="`pwd`"; \
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			make -f $$here/Makefile link-shared ); \
+			set $(MAKE); \
 			$$1 -f $$here/Makefile link-shared ); \
 		if [ "$(INSTALLTOP)" != "/usr" ]; then \
 			echo 'OpenSSL shared libraries have been installed in:'; \
 			echo '  $(INSTALLTOP)'; \
 			echo ''; \
 			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
 		fi; \
 	fi
 	@for i in $(SIGS) ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
 			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done;
 	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -726,23 +868,45 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@for i in doc/apps/*.pod; do \
+	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
 	here="`pwd`"; \
 	filecase=; \
 	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" ]; then \
 		filecase=-i; \
 	fi; \
 	for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `dirname $$i`; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
-		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
+		sh -c "$$pod2man \
-			 --release=$(VERSION) `basename $$i`) \
+			--section=$$sec --center=OpenSSL \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+			--release=$(VERSION) `basename $$i`") \
-	done
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		$(PERL) util/extract-names.pl < $$i | \
 			grep -v $$filecase "^$$fn\$$" | \
 			grep -v "[	]" | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
 				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done; \
 	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `dirname $$i`; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
-		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
+		sh -c "$$pod2man \
-			--release=$(VERSION) `basename $$i`) \
+			--section=$$sec --center=OpenSSL \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
 		$(PERL) util/extract-names.pl < $$i | \
 			grep -v $$filecase "^$$fn\$$" | \
 			grep -v "[	]" | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
 				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done
 # DO NOT DELETE THIS LINE -- make depend depends on it.
--- a/124
+++ b/124
@@ -5,14 +5,130 @@
  This file gives a brief overview of the major changes between each OpenSSL
  release. For more details please read the CHANGES file.
  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
      o Security: fix various ASN1 parsing bugs.
      o New -ignore_err option to OCSP utility.
      o Various interop and bug fixes in S/MIME code.
      o SSL/TLS protocol fix for unrequested client certificates.
  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
      o Security: counter the Klima-Pokorny-Rosa extension of
        Bleichbacher's attack 
      o Security: make RSA blinding default.
      o Configuration: Irix fixes, AIX fixes, better mingw support.
      o Support for new platforms: linux-ia64-ecc.
      o Build: shared library support fixes.
      o ASN.1: treat domainComponent correctly.
      o Documentation: fixes and additions.
  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
      o Security: Important security related bugfixes.
      o Enhanced compatibility with MIT Kerberos.
      o Can be built without the ENGINE framework.
      o IA32 assembler enhancements.
      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
      o Configuration: the no-err option now works properly.
      o SSL/TLS: now handles manual certificate chain building.
      o SSL/TLS: certain session ID malfunctions corrected.
  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
      o New library section OCSP.
-      o Complete haul-over of the ASN.1 library section.
+      o Complete rewrite of ASN1 code.
      o CRL checking in verify code and openssl utility.
      o Extension copying in 'ca' utility.
      o Flexible display options in 'ca' utility.
      o Provisional support for international characters with UTF8.
      o Support for external crypto devices ('engine') is no longer
        a separate distribution.
      o New elliptic curve library section.
      o New AES (Rijndael) library section.
      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
        Linux x86_64, Linux 64-bit on Sparc v9
      o Extended support for some platforms: VxWorks
      o Enhanced support for shared libraries.
      o Now only builds PIC code when shared library support is requested.
      o Support for pkg-config.
      o Lots of new manuals.
      o Makes symbolic links to or copies of manuals to cover all described
        functions.
      o Change DES API to clean up the namespace (some applications link also
        against libdes providing similar functions having the same name).
        Provide macros for backward compatibility (will be removed in the
        future).
      o Unify handling of cryptographic algorithms (software and engine)
        to be available via EVP routines for asymmetric and symmetric ciphers.
      o NCONF: new configuration handling routines.
      o Change API to use more 'const' modifiers to improve error checking
        and help optimizers.
      o Finally remove references to RSAref.
      o Reworked parts of the BIGNUM code.
      o Support for new engines: Broadcom ubsec, Accelerated Encryption
        Processing, IBM 4758.
      o A few new engines added in the demos area.
      o Extended and corrected OID (object identifier) table.
      o PRNG: query at more locations for a random device, automatic query for
        EGD style random sources at several locations.
      o SSL/TLS: allow optional cipher choice according to server's preference.
      o SSL/TLS: allow server to explicitly set new session ids.
      o SSL/TLS: support Kerberos cipher suites (RFC2712).
 	Only supports MIT Kerberos for now.
      o SSL/TLS: allow more precise control of renegotiations and sessions.
      o SSL/TLS: add callback to retrieve SSL/TLS messages.
      o SSL/TLS: support AES cipher suites (RFC3268).
-  Changes between OpenSSL 0.9.6b and OpenSSL 0.9.6c:
+  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
      o Security: fix various ASN1 parsing bugs.
      o SSL/TLS protocol fix for unrequested client certificates.
  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
      o Security: counter the Klima-Pokorny-Rosa extension of
        Bleichbacher's attack 
      o Security: make RSA blinding default.
      o Build: shared library support fixes.
  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
      o Important security related bugfixes.
  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
      o New configuration targets for Tandem OSS and A/UX.
      o New OIDs for Microsoft attributes.
      o Better handling of SSL session caching.
      o Better comparison of distinguished names.
      o Better handling of shared libraries in a mixed GNU/non-GNU environment.
      o Support assembler code with Borland C.
      o Fixes for length problems.
      o Fixes for uninitialised variables.
      o Fixes for memory leaks, some unusual crashes and some race conditions.
      o Fixes for smaller building problems.
      o Updates of manuals, FAQ and other instructive documents.
  Major changes between OpenSSL 0.9.6f and OpenSSL 0.9.6g:
      o Important building fixes on Unix.
  Major changes between OpenSSL 0.9.6e and OpenSSL 0.9.6f:
      o Various important bugfixes.
  Major changes between OpenSSL 0.9.6d and OpenSSL 0.9.6e:
      o Important security related bugfixes.
      o Various SSL/TLS library bugfixes.
  Major changes between OpenSSL 0.9.6c and OpenSSL 0.9.6d:
      o Various SSL/TLS library bugfixes.
      o Fix DH parameter generation for 'non-standard' generators.
  Major changes between OpenSSL 0.9.6b and OpenSSL 0.9.6c:
      o Various SSL/TLS library bugfixes.
      o BIGNUM library fixes.
@@ -25,7 +141,7 @@
        Broadcom and Cryptographic Appliance's keyserver
        [in 0.9.6c-engine release].
-  Changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
+  Major changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
      o Security fix: PRNG improvements.
      o Security fix: RSA OAEP check.
@@ -58,7 +174,7 @@
      o Bug fixes for Win32, HP/UX and Irix.
      o Bug fixes in BIGNUM, SSL, PKCS#7, PKCS#12, X.509, CONF and
        memory checking routines.
-      o Bug fixes for RSA operations in threaded enviroments.
+      o Bug fixes for RSA operations in threaded environments.
      o Bug fixes in misc. openssl applications.
      o Remove a few potential memory leaks.
      o Add tighter checks of BIGNUM routines.
--- a/131
+++ b/131
@@ -0,0 +1,131 @@
 * System libcrypto.dylib and libssl.dylib are used by system ld on MacOS X.
    NOTE: The problem described here only applies when OpenSSL isn't built
    with shared library support (i.e. without the "shared" configuration
    option).  If you build with shared library support, you will have no
    problems as long as you set up DYLD_LIBRARY_PATH properly at all times.
 This is really a misfeature in ld, which seems to look for .dylib libraries
 along the whole library path before it bothers looking for .a libraries.  This
 means that -L switches won't matter unless OpenSSL is built with shared
 library support.
 The workaround may be to change the following lines in apps/Makefile.ssl and
 test/Makefile.ssl:
  LIBCRYPTO=-L.. -lcrypto
  LIBSSL=-L.. -lssl
 to:
  LIBCRYPTO=../libcrypto.a
  LIBSSL=../libssl.a
 It's possible that something similar is needed for shared library support
 as well.  That hasn't been well tested yet.
 Another solution that many seem to recommend is to move the libraries
 /usr/lib/libcrypto.0.9.dylib, /usr/lib/libssl.0.9.dylib to a different
 directory, build and install OpenSSL and anything that depends on your
 build, then move libcrypto.0.9.dylib and libssl.0.9.dylib back to their
 original places.  Note that the version numbers on those two libraries
 may differ on your machine.
 As long as Apple doesn't fix the problem with ld, this problem building
 OpenSSL will remain as is.
 * Parallell make leads to errors
 While running tests, running a parallell make is a bad idea.  Many test
 scripts use the same name for output and input files, which means different
 will interfere with each other and lead to test failure.
 The solution is simple for now: don't run parallell make when testing.
 * Bugs in gcc 3.0 triggered
 According to a problem report, there are bugs in gcc 3.0 that are
 triggered by some of the code in OpenSSL, more specifically in
 PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
 	header+=11;
 	if (*header != '4') return(0); header++;
 	if (*header != ',') return(0); header++;
 What happens is that gcc might optimize a little too agressively, and
 you end up with an extra incrementation when *header != '4'.
 We recommend that you upgrade gcc to as high a 3.x version as you can.
 * solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
 As subject suggests SHA-1 might perform poorly (4 times slower)
 if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
 this seems to be the fact that compiler emits multiplication to
 perform shift operations:-( To work the problem around configure
 with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
 * Problems with hp-parisc2-cc target when used with "no-asm" flag
 When using the hp-parisc2-cc target, wrong bignum code is generated.
 This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
 aggressive optimization.
 The problem manifests itself by the BN_kronecker test hanging in an
 endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
 which itself hangs. The reason could be tracked down to the bn_mul_comba8()
 function in bn_asm.c. At some occasions the higher 32bit value of r[7]
 is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
 as no debugger support possible at +O3 and additional fprintf()'s
 introduced fixed the bug, therefore it is most likely a bug in the
 optimizer.
 The bug was found in the BN_kronecker test but may also lead to
 failures in other parts of the code.
 (See Ticket #426.)
 Workaround: modify the target to +O2 when building with no-asm.
 * Poor support for AIX shared builds.
 do_aix-shared rule is not flexible enough to parameterize through a
 config-line. './Configure aix43-cc shared' is working, but not
 './Configure aix64-gcc shared'. In latter case make fails to create shared
 libraries. It's possible to build 64-bit shared libraries by running
 'env OBJECT_MODE=64 make', but we need more elegant solution. Preferably one
 supporting even gcc shared builds. See RT#463 for background information.
 * Problems building shared libraries on SCO OpenServer Release 5.0.6
  with gcc 2.95.3
 The symptoms appear when running the test suite, more specifically
 test/ectest, with the following result:
 OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
 ectest.c:186: ABORT
 The cause of the problem seems to be that isxdigit(), called from
 BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
 investigation shows that any of the isxxx() macros return 0 on any
 input.  A direct look in the information array that the isxxx() use,
 called __ctype, shows that it contains all zeroes...
 Taking a look at the newly created libcrypto.so with nm, one can see
 that the variable __ctype is defined in libcrypto's .bss (which
 explains why it is filled with zeroes):
 $ nm -Pg libcrypto.so | grep __ctype
 __ctype B 0011659c
 __ctype2 U         
 Curiously, __ctype2 is undefined, in spite of being declared in
 /usr/include/ctype.h in exactly the same way as __ctype.
 Any information helping to solve this issue would be deeply
 appreciated.
 NOTE: building non-shared doesn't come with this problem.
--- a/21
+++ b/21
@@ -1,7 +1,7 @@
- OpenSSL 0.9.8-dev 24 Sep 2000
+ OpenSSL 0.9.7c 30 Sep 2003
- Copyright (c) 1998-2002 The OpenSSL Project
+ Copyright (c) 1998-2003 The OpenSSL Project
 Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
 All rights reserved.
@@ -122,6 +122,13 @@
 lists the functions; you will probably have to look at the code to work out
 how to use them. Look at the example programs.
 PROBLEMS
 --------
 For some platforms, there are some known problems that may affect the user
 or application author.  We try to collect those in doc/PROBLEMS, with current
 thoughts on how they should be solved in a future of OpenSSL.
 SUPPORT 
 -------
@@ -146,11 +153,13 @@
    - Problem Description (steps that will reproduce the problem, if known)
    - Stack Traceback (if the application dumps core)
- Report the bug to the OpenSSL project at:
+ Report the bug to the OpenSSL project via the Request Tracker
 (http://www.openssl.org/support/rt2.html) by mail to:
    openssl-bugs@openssl.org
- Note that mail to openssl-bugs@openssl.org is forwarded to a public
+ Note that mail to openssl-bugs@openssl.org is recorded in the publicly
 readable request tracker database and is forwarded to a public
 mailing list. Confidential mail may be sent to openssl-security@openssl.org
 (PGP key available from the key servers).
@@ -164,7 +173,9 @@
 textual explanation of what your patch does.
 Note: For legal reasons, contributions from the US can be accepted only
- if a copy of the patch is sent to crypt@bxa.doc.gov
+ if a TSA notification and a copy of the patch is sent to crypt@bis.doc.gov;
 see http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
 and http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e)).
 The preferred format for changes is "diff -u" output. You might
 generate it like this:
--- a/README.ENGINE
+++ b/README.ENGINE
@@ -154,7 +154,7 @@
    shared-library that contains the ENGINE implementation, and "NO_VCHECK"
    might possibly be useful if there is a minor version conflict and you
    (or a vendor helpdesk) is convinced you can safely ignore it.
-    "ENGINE_ID" is probably only needed if a shared-library implements
+    "ID" is probably only needed if a shared-library implements
    multiple ENGINEs, but if you know the engine id you expect to be using,
    it doesn't hurt to specify it (and this provides a sanity check if
    nothing else). "LIST_ADD" is only required if you actually wish the
@@ -174,7 +174,7 @@
       ENGINE *e = ENGINE_by_id("dynamic");
       ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libfoo.so", 0);
-       ENGINE_ctrl_cmd_string(e, "ENGINE_ID", "foo", 0);
+       ENGINE_ctrl_cmd_string(e, "ID", "foo", 0);
       ENGINE_ctrl_cmd_string(e, "LOAD", NULL, 0);
       ENGINE_ctrl_cmd_string(e, "CMD_FOO", "some input data", 0);
@@ -184,7 +184,7 @@
       openssl engine dynamic \
                 -pre SO_PATH:/lib/libfoo.so \
-                 -pre ENGINE_ID:foo \
+                 -pre ID:foo \
                 -pre LOAD \
                 -pre "CMD_FOO:some input data"
@@ -192,7 +192,7 @@
       openssl engine -vvvv dynamic \
                 -pre SO_PATH:/lib/libfoo.so \
-                 -pre ENGINE_ID:foo \
+                 -pre ID:foo \
                 -pre LOAD
    Applications that support the ENGINE API and more specifically, the
--- a/56
+++ b/56
@@ -1,10 +1,22 @@
  OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2002/02/13 10:21:25 $
+  ______________                           $Date: 2003/10/02 10:55:20 $
  DEVELOPMENT STATE
-    o  OpenSSL 0.9.7:  Under development...
+    o  OpenSSL 0.9.8:  Under development...
    o  OpenSSL 0.9.7c: Released on September 30th, 2003
    o  OpenSSL 0.9.7b: Released on April     10th, 2003
    o  OpenSSL 0.9.7a: Released on February  19th, 2003
    o  OpenSSL 0.9.7:  Released on December  31st, 2002
    o  OpenSSL 0.9.6k: Released on September 30th, 2003
    o  OpenSSL 0.9.6j: Released on April     10th, 2003
    o  OpenSSL 0.9.6i: Released on February  19th, 2003
    o  OpenSSL 0.9.6h: Released on December   5th, 2002
    o  OpenSSL 0.9.6g: Released on August     9th, 2002
    o  OpenSSL 0.9.6f: Released on August     8th, 2002
    o  OpenSSL 0.9.6e: Released on July      30th, 2002
    o  OpenSSL 0.9.6d: Released on May        9th, 2002
    o  OpenSSL 0.9.6c: Released on December  21st, 2001
    o  OpenSSL 0.9.6b: Released on July       9th, 2001
    o  OpenSSL 0.9.6a: Released on April      5th, 2001
@@ -17,10 +29,11 @@
    o  OpenSSL 0.9.2b: Released on March     22th, 1999
    o  OpenSSL 0.9.1c: Released on December  23th, 1998
  [See also http://www.openssl.org/support/rt2.html]
  RELEASE SHOWSTOPPERS
-    o BIGNUM library failures on 64-bit platforms (0.9.7-dev):
+    o 
      - BN_mod_mul verificiation (bc) fails for solaris64-sparcv9-cc
  AVAILABLE PATCHES
@@ -43,30 +56,13 @@
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
 	Shared library support for VMS.
-	Kerberos 5 authentication
+	Kerberos 5 authentication (Heimdal)
 	Constification
 	OCSP
  NEEDS PATCH
    o  An (optional) countermeasure against the predictable-IV CBC
       weakness in SSL/TLS should be added; see
       http://www.openssl.org/~bodo/tls-cbc.txt
    o  All 'openssl' subprograms taking '-des' and '-des3' options should
       include AES support (0.9.7-dev)
    o  'openssl speed' should include AES support (0.9.7-dev)
    o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
    o  OpenSSL_0_9_6-stable:
       #include <openssl/e_os.h> in exported header files is illegal since
       e_os.h is suitable only for library-internal use.
    o  Whenever strncpy is used, make sure the resulting string is NULL-terminated
       or an error is reported
    o  "OpenSSL STATUS" is never up-to-date.
  OPEN ISSUES
@@ -95,22 +91,6 @@
                    which apparently is not flexible enough to generate
                    libcrypto)
    o  The perl/ stuff needs a major overhaul. Currently it's
       totally obsolete. Either we clean it up and enhance it to be up-to-date
       with the C code or we also could replace it with the really nice
       Net::SSLeay package we can find under
       http://www.neuronio.pt/SSLeay.pm.html.  Ralf uses this package for a
       longer time and it works fine and is a nice Perl module. Best would be
       to convince the author to work for the OpenSSL project and create a
       Net::OpenSSL or Crypt::OpenSSL package out of it and maintains it for
       us.
       Status: Ralf thinks we should both contact the author of Net::SSLeay
               and look how much effort it is to bring Eric's perl/ stuff up
               to date.
               Paul +1
  WISHES
    o  Add variants of DH_generate_parameters() and BN_generate_prime() [etc?]
--- a/1495
+++ b/1495
--- a/VMS/tcpip_shr_decc.opt
+++ b/VMS/tcpip_shr_decc.opt
@@ -0,0 +1 @@
 sys$share:tcpip$ipc_shr.exe/share
--- a/apps/Makefile.ssl
+++ b/apps/Makefile.ssl
--- a/apps/apps.c
+++ b/apps/apps.c
@@ -114,9 +114,7 @@
 #include <string.h>
 #include <sys/types.h>
 #include <sys/stat.h>
-#define NON_MAIN
+#include <ctype.h>
 #include "apps.h"
 #undef NON_MAIN
 #include <openssl/err.h>
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
@@ -124,17 +122,13 @@
 #include <openssl/pkcs12.h>
 #include <openssl/ui.h>
 #include <openssl/safestack.h>
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #ifdef OPENSSL_SYS_WINDOWS
 #define strcasecmp _stricmp
 #else
 #include <strings.h>
 #endif
-#ifdef OPENSSL_SYS_WINDOWS
+#define NON_MAIN
-#  include "bss_file.c"
+#include "apps.h"
-#endif
+#undef NON_MAIN
 typedef struct {
 	char *name;
@@ -147,7 +141,7 @@ static UI_METHOD *ui_method = NULL;
 static int set_table_opts(unsigned long *flags, const char *arg, const NAME_EX_TBL *in_tbl);
 static int set_multi_opts(unsigned long *flags, const char *arg, const NAME_EX_TBL *in_tbl);
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
 /* Looks like this stuff is worth moving into separate function */
 static EVP_PKEY *
 load_netscape_key(BIO *err, BIO *key, const char *file,
@@ -310,9 +304,16 @@ void program_name(char *in, char *out, int size)
 	q=strrchr(p,'.');
 	if (q == NULL)
-		q = in+size;
+		q = p + strlen(p);
-	strncpy(out,p,q-p);
+	strncpy(out,p,size-1);
-	out[q-p]='\0';
+	if (q-p >= size)
 		{
 		out[size-1]='\0';
 		}
 	else
 		{
 		out[q-p]='\0';
 		}
 	}
 #else
 void program_name(char *in, char *out, int size)
@@ -324,8 +325,7 @@ void program_name(char *in, char *out, int size)
 		p++;
 	else
 		p=in;
-	strncpy(out,p,size-1);
+	BUF_strlcpy(out,p,size);
 	out[size-1]='\0';
 	}
 #endif
 #endif
@@ -333,15 +333,37 @@ void program_name(char *in, char *out, int size)
 #ifdef OPENSSL_SYS_WIN32
 int WIN32_rename(char *from, char *to)
 	{
-#ifdef OPENSSL_SYS_WINNT
+#ifndef OPENSSL_SYS_WINCE
-	int ret;
+	/* Windows rename gives an error if 'to' exists, so delete it
-/* Note: MoveFileEx() doesn't work under Win95, Win98 */
+	 * first and ignore file not found errror
-
+	 */
-	ret=MoveFileEx(from,to,MOVEFILE_REPLACE_EXISTING|MOVEFILE_COPY_ALLOWED);
+	if((remove(to) != 0) && (errno != ENOENT))
-	return(ret?0:-1);
+		return -1;
 #undef rename
 	return rename(from, to);
 #else
-	unlink(to);
+	/* convert strings to UNICODE */
-	return MoveFile(from, to);
+	{
 	BOOL result = FALSE;
 	WCHAR* wfrom;
 	WCHAR* wto;
 	int i;
 	wfrom = malloc((strlen(from)+1)*2);
 	wto = malloc((strlen(to)+1)*2);
 	if (wfrom != NULL && wto != NULL)
 		{
 		for (i=0; i<(int)strlen(from)+1; i++)
 			wfrom[i] = (short)from[i];
 		for (i=0; i<(int)strlen(to)+1; i++)
 			wto[i] = (short)to[i];
 		result = MoveFile(wfrom, wto);
 		}
 	if (wfrom != NULL)
 		free(wfrom);
 	if (wto != NULL)
 		free(wto);
 	return result;
 	}
 #endif
 	}
 #endif
@@ -421,16 +443,20 @@ int app_init(long mesgwin)
 int dump_cert_text (BIO *out, X509 *x)
 {
-	char buf[256];
+	char *p;
 	X509_NAME_oneline(X509_get_subject_name(x),buf,256);
 	BIO_puts(out,"subject=");
 	BIO_puts(out,buf);
-	X509_NAME_oneline(X509_get_issuer_name(x),buf,256);
+	p=X509_NAME_oneline(X509_get_subject_name(x),NULL,0);
-	BIO_puts(out,"\nissuer= ");
+	BIO_puts(out,"subject=");
-	BIO_puts(out,buf);
+	BIO_puts(out,p);
 	OPENSSL_free(p);
 	p=X509_NAME_oneline(X509_get_issuer_name(x),NULL,0);
 	BIO_puts(out,"\nissuer=");
 	BIO_puts(out,p);
 	BIO_puts(out,"\n");
-        return 0;
+	OPENSSL_free(p);
 	return 0;
 }
 static int ui_open(UI *ui)
@@ -486,7 +512,7 @@ static int ui_close(UI *ui)
 	{
 	return UI_method_get_closer(UI_OpenSSL())(ui);
 	}
-int setup_ui_method()
+int setup_ui_method(void)
 	{
 	ui_method = UI_create_method("OpenSSL application user interface");
 	UI_method_set_opener(ui_method, ui_open);
@@ -495,7 +521,7 @@ int setup_ui_method()
 	UI_method_set_closer(ui_method, ui_close);
 	return 0;
 	}
-void destroy_ui_method()
+void destroy_ui_method(void)
 	{
 	if(ui_method)
 		{
@@ -561,7 +587,7 @@ int password_callback(char *buf, int bufsiz, int verify,
 		if (buff)
 			{
-			memset(buff,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buff,(unsigned int)bufsiz);
 			OPENSSL_free(buff);
 			}
@@ -571,13 +597,13 @@ int password_callback(char *buf, int bufsiz, int verify,
 			{
 			BIO_printf(bio_err, "User interface error\n");
 			ERR_print_errors(bio_err);
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		if (ok == -2)
 			{
 			BIO_printf(bio_err,"aborted!\n");
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		UI_free(ui);
@@ -790,7 +816,7 @@ end:
 	return(x);
 	}
-EVP_PKEY *load_key(BIO *err, const char *file, int format,
+EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip)
 	{
 	BIO *key=NULL;
@@ -800,11 +826,12 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 	cb_data.password = pass;
 	cb_data.prompt_info = file;
-	if (file == NULL)
+	if (file == NULL && (!maybe_stdin || format == FORMAT_ENGINE))
 		{
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
 #ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -814,18 +841,26 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 				ui_method, &cb_data);
 		goto end;
 		}
 #endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
 		ERR_print_errors(err);
 		goto end;
 		}
-	if (BIO_read_filename(key,file) <= 0)
+	if (file == NULL && maybe_stdin)
 		{
-		BIO_printf(err, "Error opening %s %s\n", key_descrip, file);
+		setvbuf(stdin, NULL, _IONBF, 0);
-		ERR_print_errors(err);
+		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		goto end;
 		}
 	else
 		if (BIO_read_filename(key,file) <= 0)
 			{
 			BIO_printf(err, "Error opening %s %s\n",
 				key_descrip, file);
 			ERR_print_errors(err);
 			goto end;
 			}
 	if (format == FORMAT_ASN1)
 		{
 		pkey=d2i_PrivateKey_bio(key, NULL);
@@ -835,7 +870,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 		pkey=PEM_read_bio_PrivateKey(key,NULL,
 			(pem_password_cb *)password_callback, &cb_data);
 		}
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
 	else if (format == FORMAT_NETSCAPE || format == FORMAT_IISSGC)
 		pkey = load_netscape_key(err, key, file, key_descrip, format);
 #endif
@@ -859,7 +894,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 	return(pkey);
 	}
-EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
+EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip)
 	{
 	BIO *key=NULL;
@@ -869,11 +904,12 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 	cb_data.password = pass;
 	cb_data.prompt_info = file;
-	if (file == NULL)
+	if (file == NULL && (!maybe_stdin || format == FORMAT_ENGINE))
 		{
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
 #ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -883,17 +919,25 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 				ui_method, &cb_data);
 		goto end;
 		}
 #endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
 		ERR_print_errors(err);
 		goto end;
 		}
-	if (BIO_read_filename(key,file) <= 0)
+	if (file == NULL && maybe_stdin)
 		{
-		BIO_printf(err, "Error opening %s %s\n", key_descrip, file);
+		setvbuf(stdin, NULL, _IONBF, 0);
-		ERR_print_errors(err);
+		BIO_set_fp(key,stdin,BIO_NOCLOSE);
-		goto end;
+		}
 	else
 		if (BIO_read_filename(key,file) <= 0)
 			{
 			BIO_printf(err, "Error opening %s %s\n",
 				key_descrip, file);
 			ERR_print_errors(err);
 			goto end;
 		}
 	if (format == FORMAT_ASN1)
 		{
@@ -904,7 +948,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 		pkey=PEM_read_bio_PUBKEY(key,NULL,
 			(pem_password_cb *)password_callback, &cb_data);
 		}
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
 	else if (format == FORMAT_NETSCAPE || format == FORMAT_IISSGC)
 		pkey = load_netscape_key(err, key, file, key_descrip, format);
 #endif
@@ -920,8 +964,8 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 	return(pkey);
 	}
-#ifndef OPENSSL_NO_RC4
+#if !defined(OPENSSL_NO_RC4) && !defined(OPENSSL_NO_RSA)
-EVP_PKEY *
+static EVP_PKEY *
 load_netscape_key(BIO *err, BIO *key, const char *file,
 		const char *key_descrip, int format)
 	{
@@ -938,7 +982,7 @@ load_netscape_key(BIO *err, BIO *key, const char *file,
 		goto error;
 	for (;;)
 		{
-		if (!BUF_MEM_grow(buf,size+1024*10))
+		if (!BUF_MEM_grow_clean(buf,size+1024*10))
 			goto error;
 		i = BIO_read(key, &(buf->data[size]), 1024*10);
 		size += i;
@@ -1066,6 +1110,7 @@ int set_cert_ex(unsigned long *flags, const char *arg)
 		{ "no_extensions", X509_FLAG_NO_EXTENSIONS, 0},
 		{ "no_sigdump", X509_FLAG_NO_SIGDUMP, 0},
 		{ "no_aux", X509_FLAG_NO_AUX, 0},
 		{ "no_attributes", X509_FLAG_NO_ATTRIBUTES, 0},
 		{ "ext_default", X509V3_EXT_DEFAULT, X509V3_EXT_UNKNOWN_MASK},
 		{ "ext_error", X509V3_EXT_ERROR_UNKNOWN, X509V3_EXT_UNKNOWN_MASK},
 		{ "ext_parse", X509V3_EXT_PARSE_UNKNOWN, X509V3_EXT_UNKNOWN_MASK},
@@ -1209,18 +1254,20 @@ static int set_table_opts(unsigned long *flags, const char *arg, const NAME_EX_T
 void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags)
 {
-	char buf[256];
+	char *buf;
 	char mline = 0;
 	int indent = 0;
 	if(title) BIO_puts(out, title);
 	if((lflags & XN_FLAG_SEP_MASK) == XN_FLAG_SEP_MULTILINE) {
 		mline = 1;
 		indent = 4;
 	}
 	if(lflags == XN_FLAG_COMPAT) {
-		X509_NAME_oneline(nm,buf,256);
+		buf = X509_NAME_oneline(nm, 0, 0);
-		BIO_puts(out,buf);
+		BIO_puts(out, buf);
 		BIO_puts(out, "\n");
 		OPENSSL_free(buf);
 	} else {
 		if(mline) BIO_puts(out, "\n");
 		X509_NAME_print_ex(out, nm, indent, lflags);
@@ -1258,8 +1305,9 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath)
 	return NULL;
 }
 #ifndef OPENSSL_NO_ENGINE
 /* Try to load an engine in a shareable library */
-ENGINE *try_load_engine(BIO *err, const char *engine, int debug)
+static ENGINE *try_load_engine(BIO *err, const char *engine, int debug)
 	{
 	ENGINE *e = ENGINE_by_id("dynamic");
 	if (e)
@@ -1314,3 +1362,37 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug)
 		}
        return e;
        }
 #endif
 int load_config(BIO *err, CONF *cnf)
 	{
 	if (!cnf)
 		cnf = config;
 	if (!cnf)
 		return 1;
 	OPENSSL_load_builtin_modules();
 	if (CONF_modules_load(cnf, NULL, 0) <= 0)
 		{
 		BIO_printf(err, "Error configuring OpenSSL\n");
 		ERR_print_errors(err);
 		return 0;
 		}
 	return 1;
 	}
 char *make_config_name()
 	{
 	const char *t=X509_get_default_cert_area();
 	char *p;
 	p=OPENSSL_malloc(strlen(t)+strlen(OPENSSL_CONF)+2);
 	strcpy(p,t);
 #ifndef OPENSSL_SYS_VMS
 	strcat(p,"/");
 #endif
 	strcat(p,OPENSSL_CONF);
 	return p;
 	}
--- a/apps/apps.h
+++ b/apps/apps.h
@@ -121,6 +121,9 @@
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif
 #include <openssl/ossl_typ.h>
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -133,10 +136,6 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
                                       * (see e_os.h).  The string is
                                       * destroyed! */
 #ifdef OPENSSL_NO_STDIO
 BIO_METHOD *BIO_s_file();
 #endif
 #ifdef OPENSSL_SYS_WIN32
 #define rename(from,to) WIN32_rename((from),(to))
 int WIN32_rename(char *oldname,char *newname);
@@ -147,8 +146,10 @@ int WIN32_rename(char *oldname,char *newname);
 #define MAIN(a,v)	main(a,v)
 #ifndef NON_MAIN
 CONF *config=NULL;
 BIO *bio_err=NULL;
 #else
 extern CONF *config;
 extern BIO *bio_err;
 #endif
@@ -174,29 +175,57 @@ extern BIO *bio_err;
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
-#  if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+#  ifndef OPENSSL_NO_ENGINE
-   defined(OPENSSL_SYS_WIN32)
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-#    ifdef _O_BINARY
+     defined(OPENSSL_SYS_WIN32)
-#      define apps_startup() \
+#      ifdef _O_BINARY
-		do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+#        define apps_startup() \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
 #      else
 #        define apps_startup() \
 			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
 			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
 #      endif
 #    else
 #      define apps_startup() \
-		do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+			setup_ui_method(); } while(0)
 #    endif
 #    define apps_shutdown() \
 			do { CONF_modules_unload(1); destroy_ui_method(); \
 			EVP_cleanup(); ENGINE_cleanup(); \
 			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
 			ERR_free_strings(); } while(0)
 #  else
-#    define apps_startup() \
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-		do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+     defined(OPENSSL_SYS_WIN32)
-		ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
+#      ifdef _O_BINARY
-		setup_ui_method(); } while(0)
+#        define apps_startup() \
 			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
 			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			setup_ui_method(); } while(0)
 #      else
 #        define apps_startup() \
 			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
 			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			setup_ui_method(); } while(0)
 #      endif
 #    else
 #      define apps_startup() \
 			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
 			ERR_load_crypto_strings(); \
 			setup_ui_method(); } while(0)
 #    endif
 #    define apps_shutdown() \
 			do { CONF_modules_unload(1); destroy_ui_method(); \
 			EVP_cleanup(); \
 			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
 			ERR_free_strings(); } while(0)
 #  endif
 #  define apps_shutdown() \
 		do { destroy_ui_method(); EVP_cleanup(); \
 		ENGINE_cleanup(); CRYPTO_cleanup_all_ex_data(); \
 		ERR_remove_state(0); ERR_free_strings(); } while(0)
 #endif
 typedef struct args_st
@@ -215,8 +244,8 @@ typedef struct pw_cb_data
 int password_callback(char *buf, int bufsiz, int verify,
 	PW_CB_DATA *cb_data);
-int setup_ui_method();
+int setup_ui_method(void);
-void destroy_ui_method();
+void destroy_ui_method(void);
 int should_retry(int i);
 int args_from_file(char *file, int *argc, char **argv[]);
@@ -235,20 +264,27 @@ int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2);
 int add_oid_section(BIO *err, CONF *conf);
 X509 *load_cert(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
-EVP_PKEY *load_key(BIO *err, const char *file, int format,
+EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
-EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
+EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 #ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 #endif
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
 			ASN1_GENERALIZEDTIME **pinvtm, char *str);
 int make_serial_index(TXT_DB *db);
 X509_NAME *do_subject(char *str, long chtype);
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
 #define FORMAT_TEXT     2
--- a/apps/asn1pars.c
+++ b/apps/asn1pars.c
@@ -103,6 +103,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	prog=argv[0];
 	argc--;
 	argv++;
@@ -181,7 +184,7 @@ bad:
 		BIO_printf(bio_err,"where options are\n");
 		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
-		BIO_printf(bio_err," -out arg      output file\n");
+		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
 		BIO_printf(bio_err," -noout arg    don't produce any output\n");
 		BIO_printf(bio_err," -offset arg   offset into file\n");
 		BIO_printf(bio_err," -length arg   length of section in file\n");
@@ -192,7 +195,6 @@ bad:
 		BIO_printf(bio_err," -strparse offset\n");
 		BIO_printf(bio_err,"               a series of these can be used to 'dig' into multiple\n");
 		BIO_printf(bio_err,"               ASN1 blob wrappings\n");
 		BIO_printf(bio_err," -out filename output DER encoding to file\n");
 		goto end;
 		}
@@ -330,6 +332,6 @@ end:
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/ca.c
+++ b/apps/ca.c
@@ -64,7 +64,6 @@
 #include <ctype.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include "apps.h"
 #include <openssl/conf.h>
 #include <openssl/bio.h>
 #include <openssl/err.h>
@@ -77,12 +76,6 @@
 #include <openssl/ocsp.h>
 #include <openssl/pem.h>
 #ifdef OPENSSL_SYS_WINDOWS
 #define strcasecmp _stricmp
 #else
 #include <strings.h>
 #endif
 #ifndef W_OK
 #  ifdef OPENSSL_SYS_VMS
 #    if defined(__DECC)
@@ -90,11 +83,13 @@
 #    else
 #      include <unixlib.h>
 #    endif
-#  elif !defined(OPENSSL_SYS_VXWORKS)
+#  elif !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_WINDOWS)
 #    include <sys/file.h>
 #  endif
 #endif
 #include "apps.h"
 #ifndef W_OK
 #  define F_OK 0
 #  define X_OK 1
@@ -191,7 +186,9 @@ static char *ca_usage[]={
 " -extensions ..  - Extension section (override value in config file)\n",
 " -extfile file   - Configuration file with X509v3 extentions to add\n",
 " -crlexts ..     - CRL extension section (override value in config file)\n",
 #ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
 #endif
 " -status serial  - Shows certificate status given the serial number\n",
 " -updatedb       - Updates db for expired certificates\n",
 NULL
@@ -238,7 +235,6 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
       	int verbose, X509_REQ *req, char *ext_sect, CONF *conf,
 	unsigned long certopt, unsigned long nameopt, int default_op,
 	int ext_copy);
 static X509_NAME *do_subject(char *subject);
 static int do_revoke(X509 *x509, TXT_DB *db, int ext, char *extval);
 static int get_certificate_status(const char *ser_status, TXT_DB *db);
 static int do_updatedb(TXT_DB *db);
@@ -329,7 +325,10 @@ int MAIN(int argc, char **argv)
 #define BSIZE 256
 	MS_STATIC char buf[3][BSIZE];
 	char *randfile=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
 #endif
 	char *tofree=NULL;
 #ifdef EFENCE
 EF_PROTECT_FREE=1;
@@ -532,11 +531,13 @@ EF_ALIGNMENT=0;
 			rev_arg = *(++argv);
 			rev_type = REV_CA_COMPROMISE;
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else
 			{
 bad:
@@ -557,24 +558,28 @@ bad:
 	ERR_load_crypto_strings();
-        e = setup_engine(bio_err, engine, 0);
+#ifndef OPENSSL_NO_ENGINE
 	e = setup_engine(bio_err, engine, 0);
 #endif
 	/*****************************************************************/
 	tofree=NULL;
 	if (configfile == NULL) configfile = getenv("OPENSSL_CONF");
 	if (configfile == NULL) configfile = getenv("SSLEAY_CONF");
 	if (configfile == NULL)
 		{
-		/* We will just use 'buf[0]' as a temporary buffer.  */
+		const char *s=X509_get_default_cert_area();
 #ifdef OPENSSL_SYS_VMS
-		strncpy(buf[0],X509_get_default_cert_area(),
+		tofree=OPENSSL_malloc(strlen(s)+sizeof(CONFIG_FILE));
-			sizeof(buf[0])-1-sizeof(CONFIG_FILE));
+		strcpy(tofree,s);
 #else
-		strncpy(buf[0],X509_get_default_cert_area(),
+		tofree=OPENSSL_malloc(strlen(s)+sizeof(CONFIG_FILE)+1);
-			sizeof(buf[0])-2-sizeof(CONFIG_FILE));
+		strcpy(tofree,s);
-		strcat(buf[0],"/");
+		strcat(tofree,"/");
 #endif
-		strcat(buf[0],CONFIG_FILE);
+		strcat(tofree,CONFIG_FILE);
-		configfile=buf[0];
+		configfile=tofree;
 		}
 	BIO_printf(bio_err,"Using configuration from %s\n",configfile);
@@ -589,6 +594,14 @@ bad:
 				,errorline,configfile);
 		goto err;
 		}
 	if(tofree)
 		{
 		OPENSSL_free(tofree);
 		tofree = NULL;
 		}
 	if (!load_config(bio_err, conf))
 		goto err;
 	/* Lets get the config section we are using */
 	if (section == NULL)
@@ -692,9 +705,9 @@ bad:
 			goto err;
 			}
 		}
-	pkey = load_key(bio_err, keyfile, keyform, key, e, 
+	pkey = load_key(bio_err, keyfile, keyform, 0, key, e, 
 		"CA private key");
-	if (key) memset(key,0,strlen(key));
+	if (key) OPENSSL_cleanse(key,strlen(key));
 	if (pkey == NULL)
 		{
 		/* load_key() has already printed an appropriate message */
@@ -1009,7 +1022,7 @@ bad:
 			}
 		if (verbose)
-			BIO_printf(bio_err, "Succesfully loaded extensions file %s\n", extfile);
+			BIO_printf(bio_err, "Successfully loaded extensions file %s\n", extfile);
 		/* We can have sections in the ext file */
 		if (!extensions && !(extensions = NCONF_get_string(extconf, "default", "extensions")))
@@ -1151,9 +1164,14 @@ bad:
 			}
 		if (verbose)
 			{
-			if ((f=BN_bn2hex(serial)) == NULL) goto err;
+			if (BN_is_zero(serial))
-			BIO_printf(bio_err,"next serial number is %s\n",f);
+				BIO_printf(bio_err,"next serial number is 00\n");
-			OPENSSL_free(f);
+			else
 				{
 				if ((f=BN_bn2hex(serial)) == NULL) goto err;
 				BIO_printf(bio_err,"next serial number is %s\n",f);
 				OPENSSL_free(f);
 				}
 			}
 		if ((attribs=NCONF_get_section(conf,policy)) == NULL)
@@ -1273,7 +1291,13 @@ bad:
 			BIO_printf(bio_err,"Write out database with %d new entries\n",sk_X509_num(cert_sk));
-			strncpy(buf[0],serialfile,BSIZE-4);
+			if(strlen(serialfile) > BSIZE-5 || strlen(dbfile) > BSIZE-5)
 				{
 				BIO_printf(bio_err,"file name too long\n");
 				goto err;
 				}
 			strcpy(buf[0],serialfile);
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[0],"-new");
@@ -1283,7 +1307,7 @@ bad:
 			if (!save_serial(buf[0],serial)) goto err;
-			strncpy(buf[1],dbfile,BSIZE-4);
+			strcpy(buf[1],dbfile);
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[1],"-new");
@@ -1313,7 +1337,13 @@ bad:
 			j=x->cert_info->serialNumber->length;
 			p=(char *)x->cert_info->serialNumber->data;
-			strncpy(buf[2],outdir,BSIZE-(j*2)-6);
+			if(strlen(outdir) >= (size_t)(j ? BSIZE-j*2-6 : BSIZE-8))
 				{
 				BIO_printf(bio_err,"certificate file name too long\n");
 				goto err;
 				}
 			strcpy(buf[2],outdir);
 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[2],"/");
@@ -1351,6 +1381,7 @@ bad:
 			{
 			/* Rename the database and the serial file */
 			strncpy(buf[2],serialfile,BSIZE-4);
 			buf[2][BSIZE-4]='\0';
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[2],"-old");
@@ -1379,6 +1410,7 @@ bad:
 				}
 			strncpy(buf[2],dbfile,BSIZE-4);
 			buf[2][BSIZE-4]='\0';
 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[2],"-old");
@@ -1442,13 +1474,13 @@ bad:
 			}
 		if ((crldays == 0) && (crlhours == 0))
 			{
-			BIO_printf(bio_err,"cannot lookup how long until the next CRL is issuer\n");
+			BIO_printf(bio_err,"cannot lookup how long until the next CRL is issued\n");
 			goto err;
 			}
 		if (verbose) BIO_printf(bio_err,"making CRL\n");
 		if ((crl=X509_CRL_new()) == NULL) goto err;
-		if (!X509_CRL_set_issuer_name(crl, X509_get_issuer_name(x509))) goto err;
+		if (!X509_CRL_set_issuer_name(crl, X509_get_subject_name(x509))) goto err;
 		tmptm = ASN1_TIME_new();
 		if (!tmptm) goto err;
@@ -1501,11 +1533,6 @@ bad:
 			if (pkey->type == EVP_PKEY_DSA) 
 				dgst=EVP_dss1();
 			else
 #endif
 #ifndef OPENSSL_NO_ECDSA
 			if (pkey->type == EVP_PKEY_ECDSA)
 				dgst=EVP_ecdsa();
 			else
 #endif
 				dgst=EVP_md5();
 			}
@@ -1550,7 +1577,13 @@ bad:
 			if (j <= 0) goto err;
 			X509_free(revcert);
-			strncpy(buf[0],dbfile,BSIZE-4);
+			if(strlen(dbfile) > BSIZE-5)
 				{
 				BIO_printf(bio_err,"filename too long\n");
 				goto err;
 				}
 			strcpy(buf[0],dbfile);
 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[0],".new");
 #else
@@ -1564,7 +1597,12 @@ bad:
 				}
 			j=TXT_DB_write(out,db);
 			if (j <= 0) goto err;
 			BIO_free_all(out);
 			out = NULL;
 			BIO_free_all(in);
 			in = NULL;
 			strncpy(buf[1],dbfile,BSIZE-4);
 			buf[1][BSIZE-4]='\0';
 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[1],".old");
 #else
@@ -1589,16 +1627,19 @@ bad:
 	/*****************************************************************/
 	ret=0;
 err:
 	if(tofree)
 		OPENSSL_free(tofree);
 	BIO_free_all(Cout);
 	BIO_free_all(Sout);
 	BIO_free_all(out);
 	BIO_free_all(in);
-	sk_X509_pop_free(cert_sk,X509_free);
+	if (cert_sk)
 		sk_X509_pop_free(cert_sk,X509_free);
 	if (ret) ERR_print_errors(bio_err);
 	app_RAND_write_file(randfile, bio_err);
-	if (free_key)
+	if (free_key && key)
 		OPENSSL_free(key);
 	BN_free(serial);
 	TXT_DB_free(db);
@@ -1608,7 +1649,7 @@ err:
 	NCONF_free(conf);
 	OBJ_cleanup();
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static void lookup_fail(char *name, char *tag)
@@ -1673,7 +1714,7 @@ static BIGNUM *load_serial(char *serialfile)
 	ret=ASN1_INTEGER_to_BN(ai,NULL);
 	if (ret == NULL)
 		{
-		BIO_printf(bio_err,"error converting number from bin to BIGNUM");
+		BIO_printf(bio_err,"error converting number from bin to BIGNUM\n");
 		goto err;
 		}
 err:
@@ -1864,7 +1905,7 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 	if (subj)
 		{
-		X509_NAME *n = do_subject(subj);
+		X509_NAME *n = do_subject(subj, MBSTRING_ASC);
 		if (!n)
 			{
@@ -2076,9 +2117,11 @@ again2:
 			}
 		}
-	row[DB_name]=X509_NAME_oneline(dn_subject,NULL,0);
+	if (BN_is_zero(serial))
-	row[DB_serial]=BN_bn2hex(serial);
+		row[DB_serial]=BUF_strdup("00");
-	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
+	else
 		row[DB_serial]=BN_bn2hex(serial);
 	if (row[DB_serial] == NULL)
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto err;
@@ -2140,7 +2183,7 @@ again2:
 #ifdef X509_V3
 	/* Make it an X509 v3 certificate. */
-	if (!X509_set_version(x509,2)) goto err;
+	if (!X509_set_version(ret,2)) goto err;
 #endif
 	if (BN_to_ASN1_INTEGER(serial,ci->serialNumber) == NULL)
@@ -2275,16 +2318,6 @@ again2:
 		EVP_PKEY_copy_parameters(pktmp,pkey);
 	EVP_PKEY_free(pktmp);
 #endif
 #ifndef OPENSSL_NO_ECDSA
 	if (pkey->type == EVP_PKEY_ECDSA)
 		dgst = EVP_ecdsa();
 	pktmp = X509_get_pubkey(ret);
 	if (EVP_PKEY_missing_parameters(pktmp) &&
 		!EVP_PKEY_missing_parameters(pkey))
 		EVP_PKEY_copy_parameters(pktmp, pkey);
 	EVP_PKEY_free(pktmp);
 #endif
 	if (!X509_sign(ret,pkey,dgst))
 		goto err;
@@ -2301,10 +2334,10 @@ again2:
 	/* row[DB_serial] done already */
 	row[DB_file]=(char *)OPENSSL_malloc(8);
-	/* row[DB_name] done already */
+	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(ret),NULL,0);
 	if ((row[DB_type] == NULL) || (row[DB_exp_date] == NULL) ||
-		(row[DB_file] == NULL))
+		(row[DB_file] == NULL) || (row[DB_name] == NULL))
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto err;
@@ -2571,7 +2604,10 @@ static int do_revoke(X509 *x509, TXT_DB *db, int type, char *value)
 		row[i]=NULL;
 	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(x509),NULL,0);
 	bn = ASN1_INTEGER_to_BN(X509_get_serialNumber(x509),NULL);
-	row[DB_serial]=BN_bn2hex(bn);
+	if (BN_is_zero(bn))
 		row[DB_serial]=BUF_strdup("00");
 	else
 		row[DB_serial]=BN_bn2hex(bn);
 	BN_free(bn);
 	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
 		{
@@ -3008,65 +3044,128 @@ int make_revoked(X509_REVOKED *rev, char *str)
 	return ret;
 	}
-static X509_NAME *do_subject(char *subject)
+/*
 * subject is expected to be in the format /type0=value0/type1=value1/type2=...
 * where characters may be escaped by \
 */
 X509_NAME *do_subject(char *subject, long chtype)
 	{
 	size_t buflen = strlen(subject)+1; /* to copy the types and values into. due to escaping, the copy can only become shorter */
 	char *buf = OPENSSL_malloc(buflen);
 	size_t max_ne = buflen / 2 + 1; /* maximum number of name elements */
 	char **ne_types = OPENSSL_malloc(max_ne * sizeof (char *));
 	char **ne_values = OPENSSL_malloc(max_ne * sizeof (char *));
 	char *sp = subject, *bp = buf;
 	int i, ne_num = 0;
 	X509_NAME *n = NULL;
 	int nid;
-	int i, nid, ne_num=0;
+	if (!buf || !ne_types || !ne_values)
 	{
 		BIO_printf(bio_err, "malloc error\n");
 		goto error;
 	}
-	char *ne_name = NULL;
+	if (*subject != '/')
-	char *ne_value = NULL;
+	{
 		BIO_printf(bio_err, "Subject does not start with '/'.\n");
 		goto error;
 	}
 	sp++; /* skip leading / */
-	char *tmp = NULL;
+	while (*sp)
 	char *p[2];
 	char *str_list[256];
 	p[0] = ",/";
 	p[1] = "=";
 	n = X509_NAME_new();
 	tmp = strtok(subject, p[0]);
 	while((tmp != NULL) && (ne_num < (sizeof str_list/sizeof *str_list)))
 		{
-		char *token = tmp;
+		/* collect type */
-
+		ne_types[ne_num] = bp;
-		while (token[0] == ' ')
+		while (*sp)
-			token++;
+			{
-		str_list[ne_num] = token;
+			if (*sp == '\\') /* is there anything to escape in the type...? */
-
+				{
-		tmp = strtok(NULL, p[0]);
+				if (*++sp)
 					*bp++ = *sp++;
 				else
 					{
 					BIO_printf(bio_err, "escape character at end of string\n");
 					goto error;
 					}
 				}
 			else if (*sp == '=')
 				{
 				sp++;
 				*bp++ = '\0';
 				break;
 				}
 			else
 				*bp++ = *sp++;
 			}
 		if (!*sp)
 			{
 			BIO_printf(bio_err, "end of string encountered while processing type of subject name element #%d\n", ne_num);
 			goto error;
 			}
 		ne_values[ne_num] = bp;
 		while (*sp)
 			{
 			if (*sp == '\\')
 				{
 				if (*++sp)
 					*bp++ = *sp++;
 				else
 					{
 					BIO_printf(bio_err, "escape character at end of string\n");
 					goto error;
 					}
 				}
 			else if (*sp == '/')
 				{
 				sp++;
 				break;
 				}
 			else
 				*bp++ = *sp++;
 			}
 		*bp++ = '\0';
 		ne_num++;
 		}
 	if (!(n = X509_NAME_new()))
 		goto error;
 	for (i = 0; i < ne_num; i++)
 		{
-		ne_name  = strtok(str_list[i], p[1]);
+		if ((nid=OBJ_txt2nid(ne_types[i])) == NID_undef)
 		ne_value = strtok(NULL, p[1]);
 		if ((nid=OBJ_txt2nid(ne_name)) == NID_undef)
 			{
-			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_name);
+			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_types[i]);
 			continue;
 			}
-		if (ne_value == NULL)
+		if (!*ne_values[i])
 			{
-			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_name);
+			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_types[i]);
 			continue;
 			}
-		if (!X509_NAME_add_entry_by_NID(n, nid, MBSTRING_ASC, (unsigned char*)ne_value, -1,-1,0))
+		if (!X509_NAME_add_entry_by_NID(n, nid, chtype, (unsigned char*)ne_values[i], -1,-1,0))
-			{
+			goto error;
 			X509_NAME_free(n);
 			return NULL;
 			}
 		}
 	OPENSSL_free(ne_values);
 	OPENSSL_free(ne_types);
 	OPENSSL_free(buf);
 	return n;
 	}
 error:
 	X509_NAME_free(n);
 	if (ne_values)
 		OPENSSL_free(ne_values);
 	if (ne_types)
 		OPENSSL_free(ne_types);
 	if (buf)
 		OPENSSL_free(buf);
 	return NULL;
 }
 int old_entry_print(BIO *bp, ASN1_OBJECT *obj, ASN1_STRING *str)
 	{
--- a/apps/ciphers.c
+++ b/apps/ciphers.c
@@ -187,7 +187,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_puts(STDout,SSL_CIPHER_description(
 				sk_SSL_CIPHER_value(sk,i),
-				buf,512));
+				buf,sizeof buf));
 			}
 		}
@@ -203,6 +203,6 @@ end:
 	if (ssl != NULL) SSL_free(ssl);
 	if (STDout != NULL) BIO_free_all(STDout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/crl.c
+++ b/apps/crl.c
@@ -81,12 +81,14 @@ static char *crl_usage[]={
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
 " -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
 " -noout          - no CRL output\n",
 " -CAfile  name   - verify CRL using certificates in file \"name\"\n",
 " -CApath  dir    - verify CRL using certificates in \"dir\"\n",
 " -nameopt arg    - various certificate name options\n",
 NULL
 };
@@ -97,6 +99,7 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	unsigned long nmflag = 0;
 	X509_CRL *x=NULL;
 	char *CAfile = NULL, *CApath = NULL;
 	int ret=1,i,num,badops=0;
@@ -105,7 +108,7 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
 	int fingerprint = 0;
-	char **pp,buf[256];
+	char **pp;
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
 	X509_LOOKUP *lookup = NULL;
@@ -120,6 +123,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	if (bio_out == NULL)
 		if ((bio_out=BIO_new(BIO_s_file())) != NULL)
 			{
@@ -185,6 +191,11 @@ int MAIN(int argc, char **argv)
 			text = 1;
 		else if (strcmp(*argv,"-hash") == 0)
 			hash= ++num;
 		else if (strcmp(*argv,"-nameopt") == 0)
 			{
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
 		else if (strcmp(*argv,"-issuer") == 0)
 			issuer= ++num;
 		else if (strcmp(*argv,"-lastupdate") == 0)
@@ -268,9 +279,7 @@ bad:
 			{
 			if (issuer == i)
 				{
-				X509_NAME_oneline(X509_CRL_get_issuer(x),
+				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
 								buf,256);
 				BIO_printf(bio_out,"issuer= %s\n",buf);
 				}
 			if (hash == i)
@@ -369,7 +378,7 @@ end:
 		X509_STORE_free(store);
 	}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static X509_CRL *load_crl(char *infile, int format)
--- a/apps/crl2p7.c
+++ b/apps/crl2p7.c
@@ -280,7 +280,7 @@ end:
 	if (crl != NULL) X509_CRL_free(crl);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 /*
--- a/apps/dgst.c
+++ b/apps/dgst.c
@@ -73,8 +73,9 @@
 #undef PROG
 #define PROG	dgst_main
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
+int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-		EVP_PKEY *key, unsigned char *sigin, int siglen);
+	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
 	  const char *file);
 int MAIN(int, char **);
@@ -88,8 +89,8 @@ int MAIN(int argc, char **argv)
 	BIO *bmd=NULL;
 	BIO *out = NULL;
 	const char *name;
-#define PROG_NAME_SIZE  16
+#define PROG_NAME_SIZE  39
-	char pname[PROG_NAME_SIZE];
+	char pname[PROG_NAME_SIZE+1];
 	int separator=0;
 	int debug=0;
 	int keyform=FORMAT_PEM;
@@ -99,7 +100,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	apps_startup();
@@ -112,8 +115,11 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	/* first check the program name */
-	program_name(argv[0],pname,PROG_NAME_SIZE);
+	program_name(argv[0],pname,sizeof pname);
 	md=EVP_get_digestbyname(pname);
@@ -162,11 +168,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyform=str2fmt(*(++argv));
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
@@ -204,7 +212,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -224,7 +234,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
@@ -273,10 +285,10 @@ int MAIN(int argc, char **argv)
 	if(keyfile)
 		{
 		if (want_pub)
-			sigkey = load_pubkey(bio_err, keyfile, keyform, NULL,
+			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		else
-			sigkey = load_key(bio_err, keyfile, keyform, NULL,
+			sigkey = load_key(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		if (!sigkey)
 			{
@@ -316,29 +328,43 @@ int MAIN(int argc, char **argv)
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-		do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf, siglen);
+		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
 			  siglen,"","(stdin)");
 		}
 	else
 		{
 		name=OBJ_nid2sn(md->type);
 		for (i=0; i<argc; i++)
 			{
 			char *tmp,*tofree=NULL;
 			int r;
 			if (BIO_read_filename(in,argv[i]) <= 0)
 				{
 				perror(argv[i]);
 				err++;
 				continue;
 				}
-			if(!out_bin) BIO_printf(out, "%s(%s)= ",name,argv[i]);
+			if(!out_bin)
-			do_fp(out, buf,inp,separator, out_bin, sigkey, 
+				{
-								sigbuf, siglen);
+				tmp=tofree=OPENSSL_malloc(strlen(name)+strlen(argv[i])+5);
 				sprintf(tmp,"%s(%s)= ",name,argv[i]);
 				}
 			else
 				tmp="";
 			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
 				siglen,tmp,argv[i]);
 			if(r)
 			    err=r;
 			if(tofree)
 				OPENSSL_free(tofree);
 			(void)BIO_reset(bmd);
 			}
 		}
 end:
 	if (buf != NULL)
 		{
-		memset(buf,0,BUFSIZE);
+		OPENSSL_cleanse(buf,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
@@ -347,11 +373,12 @@ end:
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
-	EXIT(err);
+	OPENSSL_EXIT(err);
 	}
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
+int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-			EVP_PKEY *key, unsigned char *sigin, int siglen)
+	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
 	  const char *file)
 	{
 	int len;
 	int i;
@@ -359,21 +386,33 @@ void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
-		if (i <= 0) break;
+		if(i < 0)
 			{
 			BIO_printf(bio_err, "Read Error in %s\n",file);
 			ERR_print_errors(bio_err);
 			return 1;
 			}
 		if (i == 0) break;
 		}
 	if(sigin)
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
 		i = EVP_VerifyFinal(ctx, sigin, (unsigned int)siglen, key); 
-		if(i > 0) BIO_printf(out, "Verified OK\n");
+		if(i > 0)
-		else if(i == 0) BIO_printf(out, "Verification Failure\n");
+			BIO_printf(out, "Verified OK\n");
 		else if(i == 0)
 			{
 			BIO_printf(out, "Verification Failure\n");
 			return 1;
 			}
 		else
 			{
 			BIO_printf(bio_err, "Error Verifying Data\n");
 			ERR_print_errors(bio_err);
 			return 1;
 			}
-		return;
+		return 0;
 		}
 	if(key)
 		{
@@ -383,7 +422,7 @@ void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			{
 			BIO_printf(bio_err, "Error Signing Data\n");
 			ERR_print_errors(bio_err);
-			return;
+			return 1;
 			}
 		}
 	else
@@ -392,6 +431,7 @@ void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	if(binout) BIO_write(out, buf, len);
 	else 
 		{
 		BIO_write(out,title,strlen(title));
 		for (i=0; i<len; i++)
 			{
 			if (sep && (i != 0))
@@ -400,5 +440,6 @@ void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
 	return 0;
 	}
--- a/apps/dh.c
+++ b/apps/dh.c
@@ -87,12 +87,17 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine;
 #endif
 	apps_startup();
@@ -100,7 +105,12 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 #ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
 #endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -131,11 +141,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -167,13 +179,17 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 #endif
 		goto end;
 		}
 	ERR_load_crypto_strings();
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -330,6 +346,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/dhparam.c
+++ b/apps/dhparam.c
@@ -148,7 +148,9 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -157,7 +159,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL,*engine=NULL;
+	char *inrand=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	int num = 0, g = 0;
 	apps_startup();
@@ -166,6 +171,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -196,11 +204,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -246,7 +256,9 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -256,7 +268,9 @@ bad:
 	ERR_load_crypto_strings();
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if (g && !num)
 		num = DEFBITS;
@@ -487,7 +501,7 @@ bad:
 		printf("\tif ((dh->p == NULL) || (dh->g == NULL))\n");
 		printf("\t\t{ DH_free(dh); return(NULL); }\n");
 		if (dh->length)
-			printf("\tdh->length = %d;\n", dh->length);
+			printf("\tdh->length = %ld;\n", dh->length);
 		printf("\treturn(dh);\n\t}\n");
 		OPENSSL_free(data);
 		}
@@ -516,7 +530,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
--- a/apps/dsa.c
+++ b/apps/dsa.c
@@ -79,6 +79,9 @@
 * -des		- encrypt output if PEM format with DES in cbc mode
 * -des3	- encrypt output if PEM format
 * -idea	- encrypt output if PEM format
 * -aes128	- encrypt output if PEM format
 * -aes192	- encrypt output if PEM format
 * -aes256	- encrypt output if PEM format
 * -text	- print a text version
 * -modulus	- print the DSA public key
 */
@@ -87,7 +90,9 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -95,7 +100,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine;
 #endif
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -106,7 +114,12 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 #ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
 #endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -147,11 +160,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -183,11 +198,17 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
 #endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -197,7 +218,9 @@ bad:
 	ERR_load_crypto_strings();
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -304,6 +327,6 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/dsaparam.c
+++ b/apps/dsaparam.c
@@ -90,7 +90,9 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -98,7 +100,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	apps_startup();
@@ -106,6 +110,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -136,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if(strcmp(*argv, "-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -183,11 +192,14 @@ bad:
 		BIO_printf(bio_err," -outform arg  output format - DER or PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
-		BIO_printf(bio_err," -text         print the key in text\n");
+		BIO_printf(bio_err," -text         print as text\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -231,7 +243,9 @@ bad:
 			}
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if (need_rand)
 		{
@@ -368,7 +382,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
--- a/apps/ecdsa.c
+++ b/apps/ecdsa.c
@@ -1,435 +0,0 @@
 /* apps/ecdsa.c */
 /* ====================================================================
 * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
 * All rights reserved.
 *
 * This package is an SSL implementation written
 * by Eric Young (eay@cryptsoft.com).
 * The implementation was written so as to conform with Netscapes SSL.
 * 
 * This library is free for commercial and non-commercial use as long as
 * the following conditions are aheared to.  The following conditions
 * apply to all code found in this distribution, be it the RC4, RSA,
 * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
 * included with this distribution is covered by the same copyright terms
 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
 * 
 * Copyright remains Eric Young's, and as such any Copyright notices in
 * the code are not to be removed.
 * If this package is used in a product, Eric Young should be given attribution
 * as the author of the parts of the library used.
 * This can be in the form of a textual message at program startup or
 * in documentation (online or textual) provided with the package.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *    "This product includes cryptographic software written by
 *     Eric Young (eay@cryptsoft.com)"
 *    The word 'cryptographic' can be left out if the rouines from the library
 *    being used are not cryptographic related :-).
 * 4. If you include any Windows specific code (or a derivative thereof) from 
 *    the apps directory (application code) you must include an acknowledgement:
 *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
 * 
 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * The licence and distribution terms for any publically available version or
 * derivative of this code cannot be changed.  i.e. this code cannot simply be
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
 #ifndef OPENSSL_NO_ECDSA
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <time.h>
 #include "apps.h"
 #include <openssl/bio.h>
 #include <openssl/err.h>
 #include <openssl/ecdsa.h>
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #undef PROG
 #define PROG	ecdsa_main
 /* -inform arg	- input format - default PEM (one of DER, NET or PEM)
 * -outform arg - output format - default PEM
 * -in arg	- input file - default stdin
 * -out arg	- output file - default stdout
 * -des		- encrypt output if PEM format with DES in cbc mode
 * -des3	- encrypt output if PEM format
 * -idea	- encrypt output if PEM format
 * -text	- print a text version
 * -pub		- print the ECDSA public key
 * -compressed  - print the public key in compressed form ( default )   
 * -hybrid 	- print the public key in hybrid form
 * -uncompressed - print the public key in uncompressed form
 *		  the last three options ( compressed, hybrid and uncompressed )
 *		  are only used if the "-pub" option is also selected.
 *	  	  For a precise description of the the meaning of compressed,
 *		  hybrid and uncompressed please refer to the X9.62 standart.
 *		  All three forms represents ways to express the ecdsa public
 *		  key ( a point on a elliptic curve ) as octet string. Let len be
 *		  the length ( in bytes ) of an element of the field over which
 *		  the curve is defined, then a compressed octet string has the form
 *		  0x02 + result of BN_bn2bin() of the x coordinate of the public key
 */
 int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 {
 	ENGINE 	*e = NULL;
 	int 	ret = 1;
 	ECDSA 	*ecdsa = NULL;
 	int 	i, badops = 0;
 	const EVP_CIPHER *enc = NULL;
 	BIO 	*in = NULL, *out = NULL;
 	int 	informat, outformat, text=0, noout=0;
 	int  	pubin = 0, pubout = 0;
 	char 	*infile, *outfile, *prog, *engine;
 	char 	*passargin = NULL, *passargout = NULL;
 	char 	*passin = NULL, *passout = NULL;
 	int 	pub = 0, point_form = 0;
 	unsigned char *buffer = NULL;
 	unsigned int  buf_len = 0;
 	BIGNUM	*tmp_bn = NULL;
 	apps_startup();
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
 	engine = NULL;
 	infile = NULL;
 	outfile = NULL;
 	informat = FORMAT_PEM;
 	outformat = FORMAT_PEM;
 	prog = argv[0];
 	argc--;
 	argv++;
 	while (argc >= 1)
 	{
 		if (strcmp(*argv,"-inform") == 0)
 		{
 			if (--argc < 1) goto bad;
 			informat=str2fmt(*(++argv));
 		}
 		else if (strcmp(*argv,"-outform") == 0)
 		{
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 		}
 		else if (strcmp(*argv,"-in") == 0)
 		{
 			if (--argc < 1) goto bad;
 			infile= *(++argv);
 		}
 		else if (strcmp(*argv,"-out") == 0)
 		{
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 		}
 		else if (strcmp(*argv,"-passin") == 0)
 		{
 			if (--argc < 1) goto bad;
 			passargin= *(++argv);
 		}
 		else if (strcmp(*argv,"-passout") == 0)
 		{
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 		}
 		else if (strcmp(*argv, "-engine") == 0)
 		{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 		}
 		else if (strcmp(*argv, "-noout") == 0)
 			noout = 1;
 		else if (strcmp(*argv, "-text") == 0)
 			text = 1;
 		else if (strcmp(*argv, "-pub") == 0)
 		{
 			pub = 1;
 			buffer = (*(argv+1));
 			if (strcmp(buffer, "compressed") == 0)
 				point_form = POINT_CONVERSION_COMPRESSED;
 			else if (strcmp(buffer, "hybrid") == 0)
 				point_form = POINT_CONVERSION_HYBRID;
 			else if (strcmp(buffer, "uncompressed") == 0)
 				point_form = POINT_CONVERSION_UNCOMPRESSED;
 			if (point_form)
 			{
 				argc--;
 				argv++;
 			}
 		}
 		else if (strcmp(*argv, "-pubin") == 0)
 			pubin=1;
 		else if (strcmp(*argv, "-pubout") == 0)
 			pubout=1;
 		else if ((enc=EVP_get_cipherbyname(&(argv[0][1]))) == NULL)
 		{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
 			badops=1;
 			break;
 		}
 		argc--;
 		argv++;
 	}
 	if (badops)
 	{
 bad:
 		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, " -inform arg     input format - DER or PEM\n");
 		BIO_printf(bio_err, " -outform arg    output format - DER or PEM\n");
 		BIO_printf(bio_err, " -in arg         input file\n");
 		BIO_printf(bio_err, " -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err, " -out arg        output file\n");
 		BIO_printf(bio_err, " -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err, " -engine e       use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err, " -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err, " -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err, " -idea           encrypt PEM output with cbc idea\n");
 #endif
 		BIO_printf(bio_err, " -text           print the key in text\n");
 		BIO_printf(bio_err, " -noout          don't print key out\n");
 		BIO_printf(bio_err, " -pub [compressed | hybrid | uncompressed] \n");
 		BIO_printf(bio_err, "         compressed     print the public key in compressed form ( default )\n");   
 		BIO_printf(bio_err, "         hybrid         print the public key in hybrid form\n");
 		BIO_printf(bio_err, "         uncompressed   print the public key in uncompressed form\n");
 		goto end;
 	}
 	ERR_load_crypto_strings();
        e = setup_engine(bio_err, engine, 0);
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
 	{
 		BIO_printf(bio_err, "Error getting passwords\n");
 		goto end;
 	}
 	in = BIO_new(BIO_s_file());
 	out = BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))
 	{
 		ERR_print_errors(bio_err);
 		goto end;
 	}
 	if (infile == NULL)
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 	else
 	{
 		if (BIO_read_filename(in,infile) <= 0)
 		{
 			perror(infile);
 			goto end;
 		}
 	}
 	BIO_printf(bio_err,"read ECDSA key\n");
 	if (informat == FORMAT_ASN1) 
 	{
 		if (pubin) 
 			ecdsa = d2i_ECDSA_PUBKEY_bio(in, NULL);
 		else 
 			ecdsa = d2i_ECDSAPrivateKey_bio(in, NULL);
 	} else if (informat == FORMAT_PEM) 
 	{
 		if (pubin) 
 			ecdsa = PEM_read_bio_ECDSA_PUBKEY(in, NULL, NULL, NULL);
 		else 
 			ecdsa = PEM_read_bio_ECDSAPrivateKey(in, NULL, NULL, passin);
 	} else
 	{
 		BIO_printf(bio_err, "bad input format specified for key\n");
 		goto end;
 	}
 	if (ecdsa == NULL)
 	{
 		BIO_printf(bio_err,"unable to load Key\n");
 		ERR_print_errors(bio_err);
 		goto end;
 	}
 	if (outfile == NULL)
 	{
 		BIO_set_fp(out, stdout, BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 		{
 			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
 			out = BIO_push(tmpbio, out);
 		}
 #endif
 	}
 	else
 	{
 		if (BIO_write_filename(out, outfile) <= 0)
 		{
 			perror(outfile);
 			goto end;
 		}
 	}
 	if (text) 
 		if (!ECDSA_print(out, ecdsa, 0))
 		{
 			perror(outfile);
 			ERR_print_errors(bio_err);
 			goto end;
 		}
 	if (pub)
 	{
 		fprintf(stdout, "Public Key (");
 		if (point_form == POINT_CONVERSION_COMPRESSED)
 			fprintf(stdout, "COMPRESSED");
 		else if (point_form == POINT_CONVERSION_UNCOMPRESSED)
 			fprintf(stdout, "UNCOMPRESSED");
 		else if (point_form == POINT_CONVERSION_HYBRID)
 			fprintf(stdout, "HYBRID");
 		fprintf(stdout, ")=");
 		buf_len = EC_POINT_point2oct(ecdsa->group, EC_GROUP_get0_generator(ecdsa->group),
 					     point_form, NULL, 0, NULL);
 		if (!buf_len)
 		{
 			BIO_printf(bio_err,"invalid public key length\n");
 			ERR_print_errors(bio_err);
 			goto end;
 		}
 		if ((tmp_bn = BN_new()) == NULL ||
 		    (buffer = OPENSSL_malloc(buf_len)) == NULL) goto end;
 		if (!EC_POINT_point2oct(ecdsa->group, EC_GROUP_get0_generator(ecdsa->group),
 					     point_form, buffer, buf_len, NULL) ||
 		    !BN_bin2bn(buffer, buf_len, tmp_bn))
 		{
 			BIO_printf(bio_err,"can not encode public key\n");
 			ERR_print_errors(bio_err);
 			OPENSSL_free(buffer);
 			goto end;
 		}
 		BN_print(out, tmp_bn);
 		fprintf(stdout,"\n");
 	}
 	if (noout) 
 		goto end;
 	BIO_printf(bio_err, "writing ECDSA key\n");
 	if (outformat == FORMAT_ASN1) 
 	{
 		if(pubin || pubout) 
 			i = i2d_ECDSA_PUBKEY_bio(out, ecdsa);
 		else 
 			i = i2d_ECDSAPrivateKey_bio(out, ecdsa);
 	} else if (outformat == FORMAT_PEM) 
 	{
 		if(pubin || pubout)
 			i = PEM_write_bio_ECDSA_PUBKEY(out, ecdsa);
 		else 
 			i = PEM_write_bio_ECDSAPrivateKey(out, ecdsa, enc,
 							NULL, 0, NULL, passout);
 	} else 
 	{
 		BIO_printf(bio_err, "bad output format specified for outfile\n");
 		goto end;
 	}
 	if (!i)
 	{
 		BIO_printf(bio_err, "unable to write private key\n");
 		ERR_print_errors(bio_err);
 	}
 	else
 		ret=0;
 end:
 	if (in) 	BIO_free(in);
 	if (out)	BIO_free_all(out);
 	if (ecdsa) 	ECDSA_free(ecdsa);
 	if (tmp_bn)	BN_free(tmp_bn);
 	if (passin) 	OPENSSL_free(passin);
 	if (passout) 	OPENSSL_free(passout);
 	apps_shutdown();
 	EXIT(ret);
 }
 #endif
--- a/apps/ecdsaparam.c
+++ b/apps/ecdsaparam.c
@@ -1,562 +0,0 @@
 /* apps/ecdsaparam.c */
 /* ====================================================================
 * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
 * All rights reserved.
 *
 * This package is an SSL implementation written
 * by Eric Young (eay@cryptsoft.com).
 * The implementation was written so as to conform with Netscapes SSL.
 * 
 * This library is free for commercial and non-commercial use as long as
 * the following conditions are aheared to.  The following conditions
 * apply to all code found in this distribution, be it the RC4, RSA,
 * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
 * included with this distribution is covered by the same copyright terms
 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
 * 
 * Copyright remains Eric Young's, and as such any Copyright notices in
 * the code are not to be removed.
 * If this package is used in a product, Eric Young should be given attribution
 * as the author of the parts of the library used.
 * This can be in the form of a textual message at program startup or
 * in documentation (online or textual) provided with the package.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *    "This product includes cryptographic software written by
 *     Eric Young (eay@cryptsoft.com)"
 *    The word 'cryptographic' can be left out if the rouines from the library
 *    being used are not cryptographic related :-).
 * 4. If you include any Windows specific code (or a derivative thereof) from 
 *    the apps directory (application code) you must include an acknowledgement:
 *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
 * 
 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * The licence and distribution terms for any publically available version or
 * derivative of this code cannot be changed.  i.e. this code cannot simply be
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
 #ifndef OPENSSL_NO_ECDSA
 #include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
 #include <string.h>
 #include "apps.h"
 #include <openssl/bio.h>
 #include <openssl/err.h>
 #include <openssl/bn.h>
 #include <openssl/ec.h>
 #include <openssl/ecdsa.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #undef PROG
 #define PROG	ecdsaparam_main
 /* -inform arg	  	- input format - default PEM (DER or PEM)
 * -outform arg 	- output format - default PEM
 * -in arg		- input file  - default stdin
 * -out arg		- output file - default stdout
 * -noout
 * -text
 * -C
 * -noout
 * -genkey		- generate a private public keypair based on the supplied curve
 * -named_curve		- use the curve oid instead of the parameters
 * -NIST_192		- use the NIST recommeded curve parameters over a 192 bit prime field
 * -NIST_224		- use the NIST recommeded curve parameters over a 224 bit prime field
 * -NIST_256		- use the NIST recommeded curve parameters over a 256 bit prime field
 * -NIST_384		- use the NIST recommeded curve parameters over a 384 bit prime field
 * -NIST_521		- use the NIST recommeded curve parameters over a 521 bit prime field
 * -X9_62_192v1		- use the X9_62 192v1 example curve over a 192 bit prime field
 * -X9_62_192v2		- use the X9_62 192v2 example curve over a 192 bit prime field
 * -X9_62_192v3		- use the X9_62 192v3 example curve over a 192 bit prime field
 * -X9_62_239v1		- use the X9_62 239v1 example curve over a 239 bit prime field
 * -X9_62_239v2		- use the X9_62 239v2 example curve over a 239 bit prime field
 * -X9_62_239v3		- use the X9_62 239v3 example curve over a 239 bit prime field
 * -X9_62_256v1		- use the X9_62 239v1 example curve over a 256 bit prime field
 */
 int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 {
 	ENGINE 	*e = NULL;
 	ECDSA 	*ecdsa = NULL;
 	int 	i, badops = 0, text = 0;
 	BIO 	*in = NULL, *out = NULL;
 	int 	informat, outformat, noout = 0, C = 0, ret = 1;
 	char 	*infile, *outfile, *prog, *inrand = NULL;
 	int 	genkey = 0;
 	int 	need_rand = 0;
 	char 	*engine=NULL;
 	int	curve_type = EC_GROUP_NO_CURVE;
 	int	named_curve = 0;
 	BIGNUM	*tmp_1 = NULL, *tmp_2 = NULL, *tmp_3 = NULL, *tmp_4 = NULL, *tmp_5 = NULL,
 		*tmp_6 = NULL, *tmp_7 = NULL;
 	BN_CTX	*ctx = NULL;
 	EC_POINT *point = NULL;
 	unsigned char *data = NULL;
 	apps_startup();
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
 	prog=argv[0];
 	argc--;
 	argv++;
 	while (argc >= 1)
 		{
 		if 	(strcmp(*argv,"-inform") == 0)
 		{
 			if (--argc < 1) goto bad;
 			informat=str2fmt(*(++argv));
 		}
 		else if (strcmp(*argv,"-outform") == 0)
 		{
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 		}
 		else if (strcmp(*argv,"-in") == 0)
 		{
 			if (--argc < 1) goto bad;
 			infile= *(++argv);
 		}
 		else if (strcmp(*argv,"-out") == 0)
 		{
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 		}
 		else if(strcmp(*argv, "-engine") == 0)
 		{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 		}
 		else if (strcmp(*argv,"-text") == 0)
 			text = 1;
 		else if (strcmp(*argv,"-C") == 0)
 			C = 1;
 		else if (strcmp(*argv,"-genkey") == 0)
 		{
 			genkey = 1;
 			need_rand = 1;
 		}
 		else if (strcmp(*argv,"-rand") == 0)
 		{
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			need_rand=1;
 		}
 		else if (strcmp(*argv, "-named_curve") == 0)
 			named_curve = 1;
 		else if (strcmp(*argv, "-NIST_192") == 0)
 			curve_type = EC_GROUP_NIST_PRIME_192;
 		else if (strcmp(*argv, "-NIST_224") == 0)
 			curve_type = EC_GROUP_NIST_PRIME_224;
 		else if (strcmp(*argv, "-NIST_256") == 0)
 			curve_type = EC_GROUP_NIST_PRIME_256;
 		else if (strcmp(*argv, "-NIST_384") == 0)
 			curve_type = EC_GROUP_NIST_PRIME_384;
 		else if (strcmp(*argv, "-NIST_521") == 0)
 			curve_type = EC_GROUP_NIST_PRIME_521;
 		else if (strcmp(*argv, "-X9_62_192v1") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_192V1;
 		else if (strcmp(*argv, "-X9_62_192v2") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_192V2;
 		else if (strcmp(*argv, "-X9_62_192v3") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_192V3;
 		else if (strcmp(*argv, "-X9_62_239v1") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_239V1;
 		else if (strcmp(*argv, "-X9_62_239v2") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_239V2;
 		else if (strcmp(*argv, "-X9_62_239v3") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_239V3;
 		else if (strcmp(*argv, "-X9_62_256v1") == 0)
 			curve_type = EC_GROUP_X9_62_PRIME_256V1;
 		else if (strcmp(*argv, "-noout") == 0)
 			noout=1;
 		else
 		{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
 			badops=1;
 			break;
 		}
 		argc--;
 		argv++;
 	}
 	if (badops)
 	{
 bad:
 		BIO_printf(bio_err,"%s [options] [bits] <infile >outfile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
 		BIO_printf(bio_err," -inform arg   input format - DER or PEM\n");
 		BIO_printf(bio_err," -outform arg  output format - DER or PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
 		BIO_printf(bio_err," -text         print the key in text\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 		BIO_printf(bio_err," -named_curve  use the curve oid instead of the parameters\n");
 		BIO_printf(bio_err," -NIST_192     use the NIST recommeded curve parameters over a 192 bit prime field\n");
 		BIO_printf(bio_err," -NIST_224     use the NIST recommeded curve parameters over a 224 bit prime field\n");
 		BIO_printf(bio_err," -NIST_256     use the NIST recommeded curve parameters over a 256 bit prime field\n");
 		BIO_printf(bio_err," -NIST_384     use the NIST recommeded curve parameters over a 384 bit prime field\n");
 		BIO_printf(bio_err," -NIST_521     use the NIST recommeded curve parameters over a 521 bit prime field\n");
 		BIO_printf(bio_err," -X9_62_192v1  use the X9_62 192v1 example curve over a 192 bit prime field\n");
 		BIO_printf(bio_err," -X9_62_192v2  use the X9_62 192v2 example curve over a 192 bit prime field\n");
 		BIO_printf(bio_err," -X9_62_192v3  use the X9_62 192v3 example curve over a 192 bit prime field\n");
 		BIO_printf(bio_err," -X9_62_239v1  use the X9_62 239v1 example curve over a 239 bit prime field\n");
 		BIO_printf(bio_err," -X9_62_239v2  use the X9_62 239v2 example curve over a 239 bit prime field\n");
 		BIO_printf(bio_err," -X9_62_239v3  use the X9_62 239v3 example curve over a 239 bit prime field\n");
 		BIO_printf(bio_err," -X9_62_256v1  use the X9_62 239v1 example curve over a 256 bit prime field\n");
 		goto end;
 	}
 	ERR_load_crypto_strings();
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
 	if ((in == NULL) || (out == NULL))
 	{
 		ERR_print_errors(bio_err);
 		goto end;
 	}
 	if (infile == NULL)
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 	else
 	{
 		if (BIO_read_filename(in,infile) <= 0)
 		{
 			perror(infile);
 			goto end;
 		}
 	}
 	if (outfile == NULL)
 	{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 		{
 		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
 		out = BIO_push(tmpbio, out);
 		}
 #endif
 	}
 	else
 	{
 		if (BIO_write_filename(out,outfile) <= 0)
 		{
 			perror(outfile);
 			goto end;
 		}
 	}
        e = setup_engine(bio_err, engine, 0);
 	if (need_rand)
 	{
 		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 		if (inrand != NULL)
 			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
 				app_RAND_load_files(inrand));
 	}
 	if (curve_type != EC_GROUP_NO_CURVE)
 	{
 		if ((ecdsa = ECDSA_new()) == NULL)
 			goto end;
 		ecdsa->group = EC_GROUP_new_by_name(curve_type);
 		if (named_curve)
 			ECDSA_set_parameter_flags(ecdsa, ECDSA_FLAG_NAMED_CURVE);
 	}
 	else if (informat == FORMAT_ASN1)
 		ecdsa = d2i_ECDSAParameters_bio(in,NULL);
 	else if (informat == FORMAT_PEM)
 		ecdsa = PEM_read_bio_ECDSAParameters(in, NULL, NULL, NULL);
 	else
 	{
 		BIO_printf(bio_err, "bad input format specified\n");
 		goto end;
 	}
 	if (ecdsa == NULL)
 	{
 		BIO_printf(bio_err, "unable to load ECDSA parameters\n");
 		ERR_print_errors(bio_err);
 		goto end;
 	}
 	if (text)
 	{
 		ECDSAParameters_print(out, ecdsa);
 	}
 	if (C)
 	{	// TODO : characteristic two
 		int 	l, len, bits_p;
 		if ((tmp_1 = BN_new()) == NULL || (tmp_2 = BN_new()) == NULL ||
 		    (tmp_3 = BN_new()) == NULL || (tmp_4 = BN_new()) == NULL ||
 		    (tmp_5 = BN_new()) == NULL || (tmp_6 = BN_new()) == NULL ||
                    (tmp_7 = BN_new()) == NULL || (ctx = BN_CTX_new()) == NULL)
 		{
 			perror("OPENSSL_malloc");
 			goto end;
 		}
 		if (!EC_GROUP_get_curve_GFp(ecdsa->group, tmp_1, tmp_2, tmp_3, ctx))
 			goto end;
 		if ((point = EC_GROUP_get0_generator(ecdsa->group)) == NULL)
 			goto end;
 		if (!EC_POINT_get_affine_coordinates_GFp(ecdsa->group, point, tmp_4, tmp_5, ctx))
 			goto end;
 		if (!EC_GROUP_get_order(ecdsa->group, tmp_6, ctx))
 			goto end;
 		if (!EC_GROUP_get_cofactor(ecdsa->group, tmp_7, ctx))
 			goto end;
 		len    = BN_num_bytes(tmp_1);
 		bits_p = BN_num_bits(tmp_1);
 		data=(unsigned char *)OPENSSL_malloc(len+20);
 		if (data == NULL)
 		{
 			perror("OPENSSL_malloc");
 			goto end;
 		}
 		l = BN_bn2bin(tmp_1, data);
 		printf("static unsigned char ecdsa%d_p[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
 		printf("\n\t};\n");
 		l = BN_bn2bin(tmp_2, data);
 		printf("static unsigned char ecdsa%d_a[]={",bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
 		printf("\n\t};\n");
 		l = BN_bn2bin(tmp_3, data);
 		printf("static unsigned char ecdsa%d_b[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
 		printf("\n\t};\n\n");
 		l = BN_bn2bin(tmp_3, data);
 		printf("static unsigned char ecdsa%d_x[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
 		printf("\n\t};\n\n");
 		l = BN_bn2bin(tmp_3, data);
 		printf("static unsigned char ecdsa%d_y[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
 		printf("\n\t};\n\n");
 		l = BN_bn2bin(tmp_3, data);
 		printf("static unsigned char ecdsa%d_o[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
 		printf("\n\t};\n\n");
 		l = BN_bn2bin(tmp_3, data);
 		printf("static unsigned char ecdsa%d_c[]={", bits_p);
 		for (i=0; i<l; i++)
 		{
 			if ((i%12) == 0) printf("\n\t");
 			printf("0x%02X,",data[i]);
 		}
 		printf("\n\t};\n\n");
 		/* FIXME:
 		 * the generated code does not make much sense
 		 *
 		 * TODO:
 		 * use EC_GROUP_new_curve_GFp instead of using EC_GFp_mont_method directly
 		 */
 		printf("ECDSA *get_ecdsa%d()\n\t{\n",bits_p);
 		printf("\tint      ok=1;\n");
 		printf("\tECDSA    *ecdsa=NULL;\n");
 		printf("\tEC_POINT *point=NULL;\n");
 		printf("\tBIGNUM   *tmp_1=NULL,*tmp_2=NULL,*tmp_3=NULL;\n");
 		printf("\tBN_CTX   *ctx=NULL;\n\n");
 		printf("\tecdsa=ECDSA_new();\n");
 		printf("\ttmp_1=BN_new();\n");
 		printf("\ttmp_2=BN_new();\n");
 		printf("\ttmp_3=BN_new();\n");
 		printf("\tctx=BN_CTX_new();\n");
 		printf("\tif (!ecdsa || !tmp_1 || !tmp_2 || !tmp_3 || !ctx) ok=0;\n");
 		printf("\tif (ok && !ecdsa->group=EC_GROUP_new(EC_GFp_mont_method())) == NULL) ok=0;");
 		printf("\tif (ok && !BN_bin2bn(ecdsa%d_p,sizeof(ecdsa%d_p),tmp_1)) ok=0;\n", bits_p, bits_p);
 		printf("\tif (ok && !BN_bin2bn(ecdsa%d_a,sizeof(ecdsa%d_a),tmp_2)) ok=0;\n", bits_p, bits_p);
 		printf("\tif (ok && !BN_bin2bn(ecdsa%d_b,sizeof(ecdsa%d_b),tmp_3)) ok=0;\n", bits_p, bits_p);
 		printf("\tif (ok && !EC_GROUP_set_curve_GFp(ecdsa->group,tmp_1,tmp_2,tmp_3,ctx)) ok=0;\n");
 		printf("\tif (ok && !BN_bin2bn(ecdsa%d_x,sizeof(ecdsa%d_p),tmp_1)) ok=0;\n", bits_p, bits_p);
 		printf("\tif (ok && !BN_bin2bn(ecdsa%d_y,sizeof(ecdsa%d_a),tmp_2)) ok=0;\n", bits_p, bits_p);
 		printf("\tif (ok && (point = EC_POINT_new(ecdsa->group)) == NULL) ok=0;\n");
 		printf("\tif (ok && !EC_POINT_set_affine_coordinates_GFp(ecdsa->group,point,tmp_1,tmp_2,ctx)) ok=0:\n");
 		printf("\tif (ok && !BN_bin2bn(ecdsa%d_o,sizeof(ecdsa%d_b),tmp_1)) ok=0;\n", bits_p, bits_p);
 		printf("\tif (ok && !BN_bin2bn(ecdsa%d_c,sizeof(ecdsa%d_b),tmp_2)) ok=0;\n", bits_p, bits_p);
 		printf("\tif (ok && !EC_GROUP_set_generator(ecdsa->group,point,tmp_1,tmp_2)) ok=0;\n");
 		printf("\tif ((ecdsa->group == NULL) || (ecdsa->pub_key == NULL) || (ecdsa->priv_key == NULL))\n");
 		printf("\t\t{ ECDSA_free(ecdsa); return(NULL); }\n");
 		printf("\treturn(ecdsa);\n\t}\n");
 	}
 	if (!noout)
 	{
 		if (outformat == FORMAT_ASN1)
 			i = i2d_ECDSAParameters_bio(out, ecdsa);
 		else if (outformat == FORMAT_PEM)
 			i = PEM_write_bio_ECDSAParameters(out, ecdsa);
 		else	
 		{
 			BIO_printf(bio_err,"bad output format specified for outfile\n");
 			goto end;
 		}
 		if (!i)
 		{
 			BIO_printf(bio_err, "unable to write ECDSA parameters\n");
 			ERR_print_errors(bio_err);
 			goto end;
 		}
 	}
 	if (genkey)
 	{
 		ECDSA *ecdsakey;
 		assert(need_rand);
 		if ((ecdsakey = ECDSAParameters_dup(ecdsa)) == NULL) goto end;
 		if (!ECDSA_generate_key(ecdsakey)) goto end;
 		if (outformat == FORMAT_ASN1)
 			i = i2d_ECDSAPrivateKey_bio(out, ecdsakey);
 		else if (outformat == FORMAT_PEM)
 			i = PEM_write_bio_ECDSAPrivateKey(out, ecdsakey, NULL, NULL, 0, NULL, NULL);
 		else	
 		{
 			BIO_printf(bio_err, "bad output format specified for outfile\n");
 			goto end;
 		}
 		ECDSA_free(ecdsakey);
 	}
 	if (need_rand)
 		app_RAND_write_file(NULL, bio_err);
 	ret=0;
 end:
 	if (in != NULL) 	BIO_free(in);
 	if (out != NULL) 	BIO_free_all(out);
 	if (ecdsa != NULL) 	ECDSA_free(ecdsa);
 	if (tmp_1)		BN_free(tmp_1);
 	if (tmp_2)		BN_free(tmp_2);
 	if (tmp_3)		BN_free(tmp_3);
 	if (tmp_3)		BN_free(tmp_4);
 	if (tmp_3)		BN_free(tmp_5);
 	if (tmp_3)		BN_free(tmp_6);
 	if (tmp_3)		BN_free(tmp_7);
 	if (ctx)		BN_CTX_free(ctx);
 	if (data)		OPENSSL_free(data);
 	apps_shutdown();
 	EXIT(ret);
 }
 #endif
--- a/apps/enc.c
+++ b/apps/enc.c
@@ -78,7 +78,7 @@ int set_hex(char *in,unsigned char *out,int size);
 #define BSIZE	(8*1024)
 #define	PROG	enc_main
-void show_ciphers(const OBJ_NAME *name,void *bio_)
+static void show_ciphers(const OBJ_NAME *name,void *bio_)
 	{
 	BIO *bio=bio_;
 	static int n;
@@ -100,9 +100,11 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	static const char magic[]="Salted__";
-	char mbuf[8];	/* should be 1 smaller than magic */
+	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
 	unsigned char *buff=NULL,*bufsize=NULL;
 	int bsize=BSIZE,verbose=0;
@@ -117,9 +119,11 @@ int MAIN(int argc, char **argv)
 	const EVP_CIPHER *cipher=NULL,*c;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
-#define PROG_NAME_SIZE  16
+#define PROG_NAME_SIZE  39
-	char pname[PROG_NAME_SIZE];
+	char pname[PROG_NAME_SIZE+1];
 #ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
 #endif
 	apps_startup();
@@ -127,8 +131,11 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	/* first check the program name */
-	program_name(argv[0],pname,PROG_NAME_SIZE);
+	program_name(argv[0],pname,sizeof pname);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;
@@ -160,11 +167,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -213,7 +222,7 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			fgets(buf,128,infile);
+			fgets(buf,sizeof buf,infile);
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -267,7 +276,9 @@ bad:
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
 #ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
 #endif
 			BIO_printf(bio_err,"Cipher Types\n");
 			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
@@ -281,7 +292,9 @@ bad:
 		argv++;
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if (bufsize != NULL)
 		{
@@ -439,12 +452,12 @@ bad:
 			else {
 				if(enc) {
 					if(hsalt) {
-						if(!set_hex(hsalt,salt,PKCS5_SALT_LEN)) {
+						if(!set_hex(hsalt,salt,sizeof salt)) {
 							BIO_printf(bio_err,
 								"invalid hex salt value\n");
 							goto end;
 						}
-					} else if (RAND_pseudo_bytes(salt, PKCS5_SALT_LEN) < 0)
+					} else if (RAND_pseudo_bytes(salt, sizeof salt) < 0)
 						goto end;
 					/* If -P option then don't bother writing */
 					if((printkey != 2)
@@ -452,14 +465,14 @@ bad:
 							 sizeof magic-1) != sizeof magic-1
 					       || BIO_write(wbio,
 							    (char *)salt,
-							    PKCS5_SALT_LEN) != PKCS5_SALT_LEN)) {
+							    sizeof salt) != sizeof salt)) {
 						BIO_printf(bio_err,"error writing output file\n");
 						goto end;
 					}
 				} else if(BIO_read(rbio,mbuf,sizeof mbuf) != sizeof mbuf
 					  || BIO_read(rbio,
 						      (unsigned char *)salt,
-				    PKCS5_SALT_LEN) != PKCS5_SALT_LEN) {
+				    sizeof salt) != sizeof salt) {
 					BIO_printf(bio_err,"error reading input file\n");
 					goto end;
 				} else if(memcmp(mbuf,magic,sizeof magic-1)) {
@@ -478,9 +491,9 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				memset(str,0,SIZE);
+				OPENSSL_cleanse(str,SIZE);
 			else
-				memset(str,0,strlen(str));
+				OPENSSL_cleanse(str,strlen(str));
 			}
 		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
 			{
@@ -521,7 +534,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<PKCS5_SALT_LEN; i++)
+				for (i=0; i<sizeof salt; i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}
@@ -583,7 +596,7 @@ end:
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 int set_hex(char *in, unsigned char *out, int size)
--- a/apps/engine.c
+++ b/apps/engine.c
@@ -56,6 +56,8 @@
 *
 */
 #ifndef OPENSSL_NO_ENGINE
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -356,6 +358,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 	{
@@ -513,5 +518,12 @@ end:
 	sk_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #else
 # if PEDANTIC
 static void *dummy=&dummy;
 # endif
 #endif
--- a/apps/errstr.c
+++ b/apps/errstr.c
@@ -122,5 +122,5 @@ int MAIN(int argc, char **argv)
 			}
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/gendh.c
+++ b/apps/gendh.c
@@ -81,13 +81,17 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	BIO *out=NULL;
 	apps_startup();
@@ -96,6 +100,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	argv++;
 	argc--;
 	for (;;)
@@ -112,11 +119,13 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -135,14 +144,18 @@ bad:
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
@@ -195,7 +208,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static void MS_CALLBACK dh_cb(int p, int n, void *arg)
--- a/apps/gendsa.c
+++ b/apps/gendsa.c
@@ -77,7 +77,9 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -85,7 +87,9 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	const EVP_CIPHER *enc=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	apps_startup();
@@ -93,6 +97,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	argv++;
 	argc--;
 	for (;;)
@@ -108,11 +115,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -129,6 +138,14 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
 		else if (strcmp(*argv,"-aes192") == 0)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -152,7 +169,13 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -161,7 +184,9 @@ bad:
 		goto end;
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -231,6 +256,6 @@ end:
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/genrsa.c
+++ b/apps/genrsa.c
@@ -81,7 +81,9 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	char *inrand=NULL;
 	BIO *out=NULL;
@@ -99,6 +103,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto err;
 	if ((out=BIO_new(BIO_s_file())) == NULL)
 		{
 		BIO_printf(bio_err,"unable to create BIO for output\n");
@@ -119,11 +126,13 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -138,6 +147,14 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
 		else if (strcmp(*argv,"-aes192") == 0)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
 #endif
 		else if (strcmp(*argv,"-passout") == 0)
 			{
@@ -157,12 +174,18 @@ bad:
 		BIO_printf(bio_err," -des3           encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
 #endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err," -out file       output the key to 'file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -176,7 +199,9 @@ bad:
 		goto err;
 	}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if (outfile == NULL)
 		{
@@ -243,7 +268,7 @@ err:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
--- a/apps/makeapps.com
+++ b/apps/makeapps.com
@@ -15,22 +15,10 @@ $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
 $!
-$!  Specify RSAREF as P1 to compile with the RSAREF library instead of
+$!  Specify DEBUG or NODEBUG as P1 to compile with or without debugger
 $!  the regular one.  If you specify NORSAREF it will compile with the
 $!  regular RSAREF routines.  (Note: If you are in the United States
 $!  you MUST compile with RSAREF unless you have a license from RSA).
 $!
 $!  Note: The RSAREF libraries are NOT INCLUDED and you have to
 $!        download it from "ftp://ftp.rsa.com/rsaref".  You have to
 $!        get the ".tar-Z" file as the ".zip" file dosen't have the
 $!        directory structure stored.  You have to extract the file
 $!        into the [.RSAREF] directory under the root directory as that
 $!        is where the scripts will look for the files.
 $!
 $!  Specify DEBUG or NODEBUG as P2 to compile with or without debugger
 $!  information.
 $!
-$!  Specify which compiler at P3 to try to compile under.
+$!  Specify which compiler at P2 to try to compile under.
 $!
 $!	   VAXC	 For VAX C.
 $!	   DECC	 For DEC C.
@@ -39,15 +27,16 @@ $!
 $!  If you don't speficy a compiler, it will try to determine which
 $!  "C" compiler to use.
 $!
-$!  P4, if defined, sets a TCP/IP library to use, through one of the following
+$!  P3, if defined, sets a TCP/IP library to use, through one of the following
 $!  keywords:
 $!
 $!	UCX		for UCX
 $!	SOCKETSHR	for SOCKETSHR+NETLIB
 $!	TCPIP		for TCPIP (post UCX)
 $!
-$!  P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
-$!  P6, if defined, sets a choice of programs to compile.
+$!  P5, if defined, sets a choice of programs to compile.
 $!
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
@@ -100,10 +89,6 @@ $! Define The CRYPTO Library.
 $!
 $ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
 $!
 $! Define The RSAREF Library.
 $!
 $ RSAREF_LIB := SYS$DISK:[-.'ARCH'.EXE.RSAREF]LIBRSAGLUE.OLB
 $!
 $! Define The SSL Library.
 $!
 $ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
@@ -181,7 +166,7 @@ $!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
@@ -292,73 +277,31 @@ $   WRITE SYS$OUTPUT FILE_NAME," needs a TCP/IP library.  Can't link.  Skipping.
 $   GOTO NEXT_FILE
 $ ENDIF
 $!
-$! Link The Program, Check To See If We Need To Link With RSAREF Or Not.
+$! Link The Program.
 $! Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
-$ IF (RSAREF.EQS."TRUE")
+$ IF (TCPIP_LIB.NES."")
 $ THEN
 $!
-$!  Check To See If We Are To Link With A Specific TCP/IP Library.
+$! Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
-$   IF (TCPIP_LIB.NES."")
+$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-$   THEN
+	'OBJECT_FILE''EXTRA_OBJ', -
-$!
+        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-$!    Link With The RSAREF Library And A Specific TCP/IP Library.
+        'TCPIP_LIB','OPT_FILE'/OPTION
 $!
 $     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
 	  'OBJECT_FILE''EXTRA_OBJ', -
          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
          'TCPIP_LIB','OPT_FILE'/OPTION
 $!
 $!  Else...
 $!
 $   ELSE
 $!
 $!    Link With The RSAREF Library And NO TCP/IP Library.
 $!
 $     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
 	  'OBJECT_FILE''EXTRA_OBJ', -
          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
          'OPT_FILE'/OPTION
 $!
 $!  End The TCP/IP Library Check.
 $!
 $   ENDIF
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$!  Don't Link With The RSAREF Routines.
+$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
 $!
 $   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
 	'OBJECT_FILE''EXTRA_OBJ', -
        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
        'OPT_FILE'/OPTION
 $!
-$!  Check To See If We Are To Link With A Specific TCP/IP Library.
+$! End The TCP/IP Library Check.
 $!
 $   IF (TCPIP_LIB.NES."")
 $   THEN
 $!
 $!    Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
 $       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
 	    'OBJECT_FILE''EXTRA_OBJ', -
            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
            'TCPIP_LIB','OPT_FILE'/OPTION
 $!
 $!  Else...
 $!
 $   ELSE
 $!
 $!    Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
 $!
 $       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
 	    'OBJECT_FILE''EXTRA_OBJ', -
            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
            'OPT_FILE'/OPTION
 $!
 $!  End The TCP/IP Library Check.
 $!
 $   ENDIF
 $!
 $! End The RSAREF Link Check.
 $!
 $ ENDIF
 $!
@@ -525,32 +468,6 @@ $! End The Crypto Library Check.
 $!
 $ ENDIF
 $!
 $! See If We Need The RSAREF Library.
 $!
 $ IF (RSAREF.EQS."TRUE")
 $ THEN
 $!
 $!  Look For The Library LIBRSAGLUE.OLB.
 $!
 $   IF (F$SEARCH(RSAREF_LIB).EQS."")
 $   THEN
 $!
 $!    Tell The User We Can't Find The LIBRSAGLUE.OLB Library.
 $!
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "Can't Find The Library ",RSAREF_LIB,"."
 $     WRITE SYS$OUTPUT "We Can't Link Without It."
 $     WRITE SYS$OUTPUT ""
 $!
 $!    Since We Can't Link Without It, Exit.
 $!
 $     EXIT
 $   ENDIF
 $!
 $! End The RSAREF Library Check.
 $!
 $ ENDIF
 $!
 $! Look For The Library LIBSSL.OLB.
 $!
 $ IF (F$SEARCH(SSL_LIB).EQS."")
@@ -581,87 +498,10 @@ $ CHECK_OPTIONS:
 $!
 $! Check To See If P1 Is Blank.
 $!
-$ P1 = "NORSAREF"
+$ IF (P1.EQS."NODEBUG")
 $ IF (P1.EQS."NORSAREF")
 $ THEN
 $!
-$!   P1 Is NORSAREF, So Compile With The Regular RSA Libraries.
+$!   P1 Is NODEBUG, So Compile Without Debugger Information.
 $!
 $    RSAREF = "FALSE"
 $!
 $! Else...
 $!
 $ ELSE
 $!
 $!  Check To See If We Are To Use The RSAREF Library.
 $!
 $   IF (P1.EQS."RSAREF")
 $   THEN
 $!
 $!    Check To Make Sure We Have The RSAREF Source Code Directory.
 $!
 $     IF (F$SEARCH("SYS$DISK:[-.RSAREF]SOURCE.DIR").EQS."")
 $     THEN
 $!
 $!      We Don't Have The RSAREF Souce Code Directory, So Tell The
 $!      User This.
 $!
 $       WRITE SYS$OUTPUT ""
 $       WRITE SYS$OUTPUT "It appears that you don't have the RSAREF Souce Code."
 $       WRITE SYS$OUTPUT "You need to go to 'ftp://ftp.rsa.com/rsaref'.  You have to"
 $       WRITE SYS$OUTPUT "get the '.tar-Z' file as the '.zip' file dosen't have the"
 $       WRITE SYS$OUTPUT "directory structure stored.  You have to extract the file"
 $       WRITE SYS$OUTPUT "into the [.RSAREF] directory under the root directory"
 $       WRITE SYS$OUTPUT "as that is where the scripts will look for the files."
 $       WRITE SYS$OUTPUT ""
 $!
 $!      Time To Exit.
 $!
 $       EXIT
 $!
 $!    Else...
 $!
 $     ELSE
 $!
 $!      Compile Using The RSAREF Library.
 $!
 $       RSAREF = "TRUE"
 $!
 $!    End The RSAREF Soure Directory Check.
 $!
 $     ENDIF
 $!
 $!  Else...
 $!
 $   ELSE 
 $!
 $!    They Entered An Invalid Option..
 $!
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "     RSAREF   :  Compile With The RSAREF Library."
 $     WRITE SYS$OUTPUT "     NORSAREF :  Compile With The Regular RSA Library."
 $     WRITE SYS$OUTPUT ""
 $!
 $!    Time To EXIT.
 $!
 $     EXIT
 $!
 $!  End The Valid Arguement Check.
 $!
 $   ENDIF
 $!
 $! End P1 Check.
 $!
 $ ENDIF
 $!
 $! Check To See If P2 Is Blank.
 $!
 $ IF (P2.EQS."NODEBUG")
 $ THEN
 $!
 $!   P2 Is NODEBUG, So Compile Without Debugger Information.
 $!
 $    DEBUGGER  = "NODEBUG"
 $    TRACEBACK = "NOTRACEBACK" 
@@ -676,7 +516,7 @@ $ ELSE
 $!
 $!  Check To See If We Are To Compile With Debugger Information.
 $!
-$   IF (P2.EQS."DEBUG")
+$   IF (P1.EQS."DEBUG")
 $   THEN
 $!
 $!    Compile With Debugger Information.
@@ -692,7 +532,7 @@ $!
 $!    Tell The User Entered An Invalid Option..
 $!
 $     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
+$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "    DEBUG    :  Compile With The Debugger Information."
 $     WRITE SYS$OUTPUT "    NODEBUG  :  Compile Without The Debugger Information."
@@ -706,13 +546,13 @@ $!  End The Valid Arguement Check.
 $!
 $   ENDIF
 $!
-$! End The P2 Check.
+$! End The P1 Check.
 $!
 $ ENDIF
 $!
-$! Check To See If P3 Is Blank.
+$! Check To See If P2 Is Blank.
 $!
-$ IF (P3.EQS."")
+$ IF (P2.EQS."")
 $ THEN
 $!
 $!  O.K., The User Didn't Specify A Compiler, Let's Try To
@@ -725,7 +565,7 @@ $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
 $!
-$     P3 = "GNUC"
+$     P2 = "GNUC"
 $!
 $!  Else...
 $!
@@ -738,7 +578,7 @@ $     THEN
 $!
 $!      Looks Like DECC, Set To Use DECC.
 $!
-$       P3 = "DECC"
+$       P2 = "DECC"
 $!
 $!    Else...
 $!
@@ -746,7 +586,7 @@ $     ELSE
 $!
 $!      Looks Like VAXC, Set To Use VAXC.
 $!
-$       P3 = "VAXC"
+$       P2 = "VAXC"
 $!
 $!    End The VAXC Compiler Check.
 $!
@@ -760,9 +600,9 @@ $!  End The Compiler Check.
 $!
 $ ENDIF
 $!
-$! Check To See If We Have A Option For P4.
+$! Check To See If We Have A Option For P3.
 $!
-$ IF (P4.EQS."")
+$ IF (P3.EQS."")
 $ THEN
 $!
 $!  Find out what socket library we have available
@@ -772,7 +612,7 @@ $   THEN
 $!
 $!    We have SOCKETSHR, and it is my opinion that it's the best to use.
 $!
-$     P4 = "SOCKETSHR"
+$     P3 = "SOCKETSHR"
 $!
 $!    Tell the user
 $!
@@ -792,7 +632,7 @@ $     THEN
 $!
 $!	Last resort: a UCX or UCX-compatible library
 $!
-$	P4 = "UCX"
+$	P3 = "UCX"
 $!
 $!      Tell the user
 $!
@@ -816,12 +656,12 @@ $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 $!
 $!  Check To See If The User Entered A Valid Paramter.
 $!
-$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
+$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
 $ THEN
 $!
 $!  Check To See If The User Wanted DECC.
 $!
-$   IF (P3.EQS."DECC")
+$   IF (P2.EQS."DECC")
 $   THEN
 $!
 $!    Looks Like DECC, Set To Use DECC.
@@ -851,7 +691,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use VAXC.
 $!
-$   IF (P3.EQS."VAXC")
+$   IF (P2.EQS."VAXC")
 $   THEN
 $!
 $!    Looks Like VAXC, Set To Use VAXC.
@@ -888,7 +728,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use GNU C.
 $!
-$   IF (P3.EQS."GNUC")
+$   IF (P2.EQS."GNUC")
 $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
@@ -917,31 +757,6 @@ $!  Set up default defines
 $!
 $   CCDEFS = """FLAT_INC=1""," + CCDEFS
 $!
 $!  Check To See If We Are To Compile With RSAREF Routines.
 $!
 $   IF (RSAREF.EQS."TRUE")
 $   THEN
 $!
 $!    Compile With RSAREF.
 $!
 $     CCDEFS = CCDEFS + ",""RSAref=1"""
 $!
 $!    Tell The User This.
 $!
 $     WRITE SYS$OUTPUT "Compiling With RSAREF Routines."
 $!
 $!    Else, We Don't Care.  Compile Without The RSAREF Library.
 $!
 $   ELSE
 $!
 $!    Tell The User We Are Compile Without The RSAREF Routines.
 $!
 $     WRITE SYS$OUTPUT "Compiling Without The RSAREF Routines.
 $!
 $!  End The RSAREF Check.
 $!
 $   ENDIF
 $!
 $!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
@@ -949,7 +764,7 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."
 $   WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."
@@ -963,17 +778,18 @@ $ ENDIF
 $!
 $! Time to check the contents, and to make sure we get the correct library.
 $!
-$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX"
+$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" -
     .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE"
 $ THEN
 $!
 $!  Check to see if SOCKETSHR was chosen
 $!
-$   IF P4.EQS."SOCKETSHR"
+$   IF P3.EQS."SOCKETSHR"
 $   THEN
 $!
 $!    Set the library to use SOCKETSHR
 $!
-$     TCPIP_LIB = "[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
 $!
 $!    Done with SOCKETSHR
 $!
@@ -981,12 +797,12 @@ $   ENDIF
 $!
 $!  Check to see if MULTINET was chosen
 $!
-$   IF P4.EQS."MULTINET"
+$   IF P3.EQS."MULTINET"
 $   THEN
 $!
 $!    Set the library to use UCX emulation.
 $!
-$     P4 = "UCX"
+$     P3 = "UCX"
 $!
 $!    Done with MULTINET
 $!
@@ -994,27 +810,53 @@ $   ENDIF
 $!
 $!  Check to see if UCX was chosen
 $!
-$   IF P4.EQS."UCX"
+$   IF P3.EQS."UCX"
 $   THEN
 $!
 $!    Set the library to use UCX.
 $!
-$     TCPIP_LIB = "[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
 $     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
 $     THEN
-$       TCPIP_LIB = "[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
 $     ELSE
 $       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
-	  TCPIP_LIB = "[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
 $     ENDIF
 $!
 $!    Done with UCX
 $!
 $   ENDIF
 $!
 $!  Check to see if TCPIP (post UCX) was chosen
 $!
 $   IF P3.EQS."TCPIP"
 $   THEN
 $!
 $!    Set the library to use TCPIP.
 $!
 $     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
 $!
 $!    Done with TCPIP
 $!
 $   ENDIF
 $!
 $!  Check to see if NONE was chosen
 $!
 $   IF P3.EQS."NONE"
 $   THEN
 $!
 $!    Do not use TCPIP.
 $!
 $     TCPIP_LIB = ""
 $!
 $!    Done with TCPIP
 $!
 $   ENDIF
 $!
 $!  Add TCP/IP type to CC definitions.
 $!
-$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P4'"
+$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
 $!
 $!  Print info
 $!
@@ -1027,10 +869,11 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
 $   WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
 $   WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP (post UCX) TCP/IP library."
 $   WRITE SYS$OUTPUT ""
 $!
 $!  Time To EXIT.
@@ -1057,7 +900,7 @@ $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
-$ WRITE SYS$OUTPUT "Main Compiling Command: ",CC
+$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
 $!
 $! Special Threads For OpenVMS v7.1 Or Later
 $!
@@ -1065,9 +908,9 @@ $! Written By:  Richard Levitte
 $!              richard@levitte.org
 $!
 $!
-$! Check To See If We Have A Option For P5.
+$! Check To See If We Have A Option For P4.
 $!
-$ IF (P5.EQS."")
+$ IF (P4.EQS."")
 $ THEN
 $!
 $!  Get The Version Of VMS We Are Using.
@@ -1089,15 +932,15 @@ $!  End The VMS Version Check.
 $!
 $   ENDIF
 $!
-$! End The P5 Check.
+$! End The P4 Check.
 $!
 $ ENDIF
 $!
 $! Check if the user wanted to compile just a subset of all the programs.
 $!
-$ IF P6 .NES. ""
+$ IF P5 .NES. ""
 $ THEN
-$   PROGRAMS = P6
+$   PROGRAMS = P5
 $ ENDIF
 $!
 $!  Time To RETURN...
--- a/apps/nseq.c
+++ b/apps/nseq.c
@@ -58,9 +58,9 @@
 #include <stdio.h>
 #include <string.h>
 #include "apps.h"
 #include <openssl/pem.h>
 #include <openssl/err.h>
 #include "apps.h"
 #undef PROG
 #define PROG nseq_main
@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 	}
 	if (infile) {
@@ -162,6 +162,6 @@ end:
 	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }
--- a/apps/ocsp.c
+++ b/apps/ocsp.c
@@ -55,14 +55,15 @@
 * Hudson (tjh@cryptsoft.com).
 *
 */
 #ifndef OPENSSL_NO_OCSP
 #include <stdio.h>
 #include <string.h>
 #include "apps.h"
 #include <openssl/pem.h>
 #include <openssl/ocsp.h>
 #include <openssl/err.h>
 #include <openssl/ssl.h>
 #include "apps.h"
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
@@ -135,6 +136,7 @@ int MAIN(int argc, char **argv)
 	int accept_count = -1;
 	int badarg = 0;
 	int i;
 	int ignore_err = 0;
 	STACK *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
@@ -145,6 +147,9 @@ int MAIN(int argc, char **argv)
 	int nmin = 0, ndays = -1;
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	SSL_load_error_strings();
 	args = argv + 1;
 	reqnames = sk_new_null();
@@ -191,6 +196,8 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
 		else if (!strcmp(*args, "-ignore_err"))
 			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
 			noverify = 1;
 		else if (!strcmp(*args, "-nonce"))
@@ -520,7 +527,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-serial n          serial number to check\n");
 		BIO_printf (bio_err, "-signer file       certificate to sign OCSP request with\n");
 		BIO_printf (bio_err, "-signkey file      private key to sign OCSP request with\n");
-		BIO_printf (bio_err, "-sign_certs file   additional certificates to include in signed request\n");
+		BIO_printf (bio_err, "-sign_other file   additional certificates to include in signed request\n");
 		BIO_printf (bio_err, "-no_certs          don't include any certificates in signed request\n");
 		BIO_printf (bio_err, "-req_text          print text form of request\n");
 		BIO_printf (bio_err, "-resp_text         print text form of response\n");
@@ -540,18 +547,18 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n");
 		BIO_printf (bio_err, "-status_age n      maximum status age in seconds\n");
 		BIO_printf (bio_err, "-noverify          don't verify response at all\n");
-		BIO_printf (bio_err, "-verify_certs file additional certificates to search for signer\n");
+		BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n");
 		BIO_printf (bio_err, "-trust_other       don't verify additional certificates\n");
 		BIO_printf (bio_err, "-no_intern         don't search certificates contained in response for signer\n");
-		BIO_printf (bio_err, "-no_sig_verify     don't check signature on response\n");
+		BIO_printf (bio_err, "-no_signature_verify don't check signature on response\n");
 		BIO_printf (bio_err, "-no_cert_verify    don't check signing certificate\n");
 		BIO_printf (bio_err, "-no_chain          don't chain verify response\n");
 		BIO_printf (bio_err, "-no_cert_checks    don't do additional checks on signing certificate\n");
 		BIO_printf (bio_err, "-port num		 port to run responder on\n");
 		BIO_printf (bio_err, "-index file	 certificate status index file\n");
 		BIO_printf (bio_err, "-CA file		 CA certificate\n");
-		BIO_printf (bio_err, "-rsigner file	 responder certificate to sign requests with\n");
+		BIO_printf (bio_err, "-rsigner file	 responder certificate to sign responses with\n");
-		BIO_printf (bio_err, "-rkey file	 responder key to sign requests with\n");
+		BIO_printf (bio_err, "-rkey file	 responder key to sign responses with\n");
 		BIO_printf (bio_err, "-rother file	 other certificates to include in response\n");
 		BIO_printf (bio_err, "-resp_no_certs     don't include any certificates in response\n");
 		BIO_printf (bio_err, "-nmin n	 	 number of minutes before next update\n");
@@ -610,11 +617,11 @@ int MAIN(int argc, char **argv)
 			NULL, e, "CA certificate");
 		if (rcertfile)
 			{
-			rother = load_certs(bio_err, sign_certfile, FORMAT_PEM,
+			rother = load_certs(bio_err, rcertfile, FORMAT_PEM,
 				NULL, e, "responder other certificates");
-			if (!sign_other) goto end;
+			if (!rother) goto end;
 			}
-		rkey = load_key(bio_err, rkeyfile, FORMAT_PEM, NULL, NULL,
+		rkey = load_key(bio_err, rkeyfile, FORMAT_PEM, 0, NULL, NULL,
 			"responder private key");
 		if (!rkey)
 			goto end;
@@ -660,7 +667,7 @@ int MAIN(int argc, char **argv)
 				NULL, e, "signer certificates");
 			if (!sign_other) goto end;
 			}
-		key = load_key(bio_err, keyfile, FORMAT_PEM, NULL, NULL,
+		key = load_key(bio_err, keyfile, FORMAT_PEM, 0, NULL, NULL,
 			"signer private key");
 		if (!key)
 			goto end;
@@ -673,6 +680,18 @@ int MAIN(int argc, char **argv)
 	if (req_text && req) OCSP_REQUEST_print(out, req, 0);
 	if (reqout)
 		{
 		derbio = BIO_new_file(reqout, "wb");
 		if(!derbio)
 			{
 			BIO_printf(bio_err, "Error opening file %s\n", reqout);
 			goto end;
 			}
 		i2d_OCSP_REQUEST_bio(derbio, req);
 		BIO_free(derbio);
 		}
 	if (ridx_filename && (!rkey || !rsigner || !rca_cert))
 		{
 		BIO_printf(bio_err, "Need a responder certificate, key and CA for this operation!\n");
@@ -707,7 +726,12 @@ int MAIN(int argc, char **argv)
 		}
 	else if (host)
 		{
 #ifndef OPENSSL_NO_SOCK
 		cbio = BIO_new_connect(host);
 #else
 		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
 		goto end;
 #endif
 		if (!cbio)
 			{
 			BIO_printf(bio_err, "Error creating connect BIO\n");
@@ -717,7 +741,16 @@ int MAIN(int argc, char **argv)
 		if (use_ssl == 1)
 			{
 			BIO *sbio;
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 			ctx = SSL_CTX_new(SSLv23_client_method());
 #elif !defined(OPENSSL_NO_SSL3)
 			ctx = SSL_CTX_new(SSLv3_client_method());
 #elif !defined(OPENSSL_NO_SSL2)
 			ctx = SSL_CTX_new(SSLv2_client_method());
 #else
 			BIO_printf(bio_err, "SSL is disabled\n");
 			goto end;
 #endif
 			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
 			sbio = BIO_new_ssl(ctx, 1);
 			cbio = BIO_push(sbio, cbio);
@@ -779,6 +812,8 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_printf(out, "Responder Error: %s (%ld)\n",
 				OCSP_response_status_str(i), i);
 		if (ignore_err)
 			goto redo_accept;
 		ret = 0;
 		goto end;
 		}
@@ -806,6 +841,8 @@ int MAIN(int argc, char **argv)
 	if (!store)
 		store = setup_verify(bio_err, CAfile, CApath);
 	if (!store)
 		goto end;
 	if (verify_certfile)
 		{
 		verify_other = load_certs(bio_err, verify_certfile, FORMAT_PEM,
@@ -882,7 +919,7 @@ end:
 		SSL_CTX_free(ctx);
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }
 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
@@ -1103,7 +1140,10 @@ static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
-	itmp = BN_bn2hex(bn);
+	if (BN_is_zero(bn))
 		itmp = BUF_strdup("00");
 	else
 		itmp = BN_bn2hex(bn);
 	row[DB_serial] = itmp;
 	BN_free(bn);
 	rrow=TXT_DB_get_by_index(db,DB_serial,row);
@@ -1119,7 +1159,11 @@ static BIO *init_responder(char *port)
 	bufbio = BIO_new(BIO_f_buffer());
 	if (!bufbio) 
 		goto err;
 #ifndef OPENSSL_NO_SOCK
 	acbio = BIO_new_accept(port);
 #else
 	BIO_printf(bio_err, "Error setting up accept BIO - sockets not supported.\n");
 #endif
 	if (!acbio)
 		goto err;
 	BIO_set_accept_bios(acbio, bufbio);
@@ -1159,7 +1203,7 @@ static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port
 	for(;;)
 		{
-		len = BIO_gets(cbio, inbuf, 1024);
+		len = BIO_gets(cbio, inbuf, sizeof inbuf);
 		if (len <= 0)
 			return 1;
 		/* Look for "POST" signalling start of query */
@@ -1206,3 +1250,4 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}
 #endif
--- a/apps/openssl.c
+++ b/apps/openssl.c
@@ -114,6 +114,7 @@
 #include <string.h>
 #include <stdlib.h>
 #define OPENSSL_C /* tells apps.h to use complete apps_startup() */
 #include "apps.h"
 #include <openssl/bio.h>
 #include <openssl/crypto.h>
 #include <openssl/lhash.h>
@@ -121,9 +122,10 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
 #include "apps.h"
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
@@ -139,11 +141,11 @@ static unsigned long MS_CALLBACK hash(const void *a_void);
 static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
 static LHASH *prog_init(void );
 static int do_cmd(LHASH *prog,int argc,char *argv[]);
 CONF *config=NULL;
 char *default_config_file=NULL;
 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
 CONF *config=NULL;
 BIO *bio_err=NULL;
 #endif
@@ -161,7 +163,7 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		goto err;
 		}
-	if (type < 0 || type > CRYPTO_NUM_LOCKS)
+	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
 		{
 		errstr = "type out of bounds";
 		goto err;
@@ -215,10 +217,11 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 int main(int Argc, char *Argv[])
 	{
 	ARGS arg;
-#define PROG_NAME_SIZE	16
+#define PROG_NAME_SIZE	39
-	char pname[PROG_NAME_SIZE];
+	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
-	MS_STATIC char *prompt,buf[1024],config_name[256];
+	MS_STATIC char *prompt,buf[1024];
 	char *to_free=NULL;
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
@@ -228,6 +231,10 @@ int main(int Argc, char *Argv[])
 	arg.data=NULL;
 	arg.count=0;
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (getenv("OPENSSL_DEBUG_MEMORY") != NULL) /* if not defined, use compiled-in library defaults */
 		{
 		if (!(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))
@@ -252,23 +259,12 @@ int main(int Argc, char *Argv[])
 	apps_startup();
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	/* Lets load up our environment a little */
 	p=getenv("OPENSSL_CONF");
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		{
+		p=to_free=make_config_name();
 		strcpy(config_name,X509_get_default_cert_area());
 #ifndef OPENSSL_SYS_VMS
 		strcat(config_name,"/");
 #endif
 		strcat(config_name,OPENSSL_CONF);
 		p=config_name;
 		}
 	default_config_file=p;
@@ -284,7 +280,7 @@ int main(int Argc, char *Argv[])
 	prog=prog_init();
 	/* first check the program name */
-	program_name(Argv[0],pname,PROG_NAME_SIZE);
+	program_name(Argv[0],pname,sizeof pname);
 	f.name=pname;
 	fp=(FUNCTION *)lh_retrieve(prog,&f);
@@ -312,7 +308,7 @@ int main(int Argc, char *Argv[])
 		{
 		ret=0;
 		p=buf;
-		n=1024;
+		n=sizeof buf;
 		i=0;
 		for (;;)
 			{
@@ -346,6 +342,8 @@ int main(int Argc, char *Argv[])
 	BIO_printf(bio_err,"bad exit\n");
 	ret=1;
 end:
 	if (to_free)
 		OPENSSL_free(to_free);
 	if (config != NULL)
 		{
 		NCONF_free(config);
@@ -362,7 +360,7 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #define LIST_STANDARD_COMMANDS "list-standard-commands"
--- a/apps/passwd.c
+++ b/apps/passwd.c
@@ -16,10 +16,9 @@
 #include <openssl/evp.h>
 #include <openssl/rand.h>
 #ifndef OPENSSL_NO_DES
-# include <openssl/des_old.h>
+# include <openssl/des.h>
 #endif
 #ifndef NO_MD5CRYPT_1
 # include <openssl/evp.h>
 # include <openssl/md5.h>
 #endif
@@ -79,6 +78,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto err;
 	out = BIO_new(BIO_s_file());
 	if (out == NULL)
 		goto err;
@@ -290,7 +292,7 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
@@ -479,7 +481,7 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	/* now compute password hash */
 #ifndef OPENSSL_NO_DES
 	if (usecrypt)
-		hash = des_crypt(passwd, *salt_p);
+		hash = DES_crypt(passwd, *salt_p);
 #endif
 #ifndef NO_MD5CRYPT_1
 	if (use1 || useapr1)
@@ -503,6 +505,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	EXIT(1);
+	OPENSSL_EXIT(1);
 	}
 #endif
--- a/apps/pkcs12.c
+++ b/apps/pkcs12.c
@@ -120,13 +120,18 @@ int MAIN(int argc, char **argv)
    char *passin = NULL, *passout = NULL;
    char *inrand = NULL;
    char *CApath = NULL, *CAfile = NULL;
 #ifndef OPENSSL_NO_ENGINE
    char *engine=NULL;
 #endif
    apps_startup();
    enc = EVP_des_ede3_cbc();
    if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
    args = argv + 1;
@@ -151,6 +156,11 @@ int MAIN(int argc, char **argv)
 		else if (!strcmp (*args, "-idea")) enc=EVP_idea_cbc();
 #endif
 		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 #ifndef OPENSSL_NO_AES
 		else if (!strcmp(*args,"-aes128")) enc=EVP_aes_128_cbc();
 		else if (!strcmp(*args,"-aes192")) enc=EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256")) enc=EVP_aes_256_cbc();
 #endif
 		else if (!strcmp (*args, "-noiter")) iter = 1;
 		else if (!strcmp (*args, "-maciter"))
 					 maciter = PKCS12_DEFAULT_ITER;
@@ -244,11 +254,13 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
 #ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
 #endif
 		} else badarg = 1;
 	} else badarg = 1;
@@ -279,6 +291,10 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-des3         encrypt private keys with triple DES (default)\n");
 #ifndef OPENSSL_NO_IDEA
 	BIO_printf (bio_err, "-idea         encrypt private keys with idea\n");
 #endif
 #ifndef OPENSSL_NO_AES
 	BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 	BIO_printf (bio_err, "              encrypt PEM output with cbc aes\n");
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
@@ -292,14 +308,18 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
 #endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
    	goto end;
    }
 #ifndef OPENSSL_NO_ENGINE
    e = setup_engine(bio_err, engine, 0);
 #endif
    if(passarg) {
 	if(export_cert) passargout = passarg;
@@ -387,7 +407,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
    CRYPTO_push_info("read MAC password");
 #endif
-	if(EVP_read_pw_string (macpass, 50, "Enter MAC Password:", export_cert))
+	if(EVP_read_pw_string (macpass, sizeof macpass, "Enter MAC Password:", export_cert))
 	{
    	    BIO_printf (bio_err, "Can't read Password\n");
    	    goto end;
@@ -415,7 +435,7 @@ int MAIN(int argc, char **argv)
 	CRYPTO_push_info("process -export_cert");
 	CRYPTO_push_info("reading private key");
 #endif
-	key = load_key(bio_err, keyname ? keyname : infile, FORMAT_PEM,
+	key = load_key(bio_err, keyname ? keyname : infile, FORMAT_PEM, 1,
 		passin, e, "private key");
 	if (!key) {
 		goto export_end;
@@ -496,9 +516,10 @@ int MAIN(int argc, char **argv)
 		    /* Exclude verified certificate */
 		    for (i = 1; i < sk_X509_num (chain2) ; i++) 
 			sk_X509_push(certs, sk_X509_value (chain2, i));
-		}
+		    /* Free first certificate */
-		sk_X509_free(chain2);
+		    X509_free(sk_X509_value(chain2, 0));
-		if (vret) {
+		    sk_X509_free(chain2);
 		} else {
 			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
 			goto export_end;
@@ -525,8 +546,6 @@ int MAIN(int argc, char **argv)
 	}
 	sk_X509_pop_free(certs, X509_free);
 	certs = NULL;
 	/* ucert is part of certs so it is already freed */
 	ucert = NULL;
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -534,7 +553,7 @@ int MAIN(int argc, char **argv)
 #endif
 	if(!noprompt &&
-		EVP_read_pw_string(pass, 50, "Enter Export Password:", 1)) {
+		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1)) {
 	    BIO_printf (bio_err, "Can't read Password\n");
 	    goto export_end;
        }
@@ -615,7 +634,6 @@ int MAIN(int argc, char **argv)
 	if (certs) sk_X509_pop_free(certs, X509_free);
 	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
 	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
 	if (ucert) X509_free(ucert);
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -632,7 +650,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
    CRYPTO_push_info("read import password");
 #endif
-    if(!noprompt && EVP_read_pw_string(pass, 50, "Enter Import Password:", 0)) {
+    if(!noprompt && EVP_read_pw_string(pass, sizeof pass, "Enter Import Password:", 0)) {
 	BIO_printf (bio_err, "Can't read Password\n");
 	goto end;
    }
@@ -686,7 +704,7 @@ int MAIN(int argc, char **argv)
    if(passin) OPENSSL_free(passin);
    if(passout) OPENSSL_free(passout);
    apps_shutdown();
-    EXIT(ret);
+    OPENSSL_EXIT(ret);
 }
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
@@ -767,7 +785,10 @@ int dump_certs_pkeys_bag (BIO *out, PKCS12_SAFEBAG *bag, char *pass,
 		print_attribs (out, bag->attrib, "Bag Attributes");
 		if (!(p8 = PKCS12_decrypt_skey(bag, pass, passlen)))
 				return 0;
-		if (!(pkey = EVP_PKCS82PKEY (p8))) return 0;
+		if (!(pkey = EVP_PKCS82PKEY (p8))) {
 			PKCS8_PRIV_KEY_INFO_free(p8);
 			return 0;
 		}
 		print_attribs (out, p8->attributes, "Key Attributes");
 		PKCS8_PRIV_KEY_INFO_free(p8);
 		PEM_write_bio_PrivateKey (out, pkey, enc, NULL, 0, NULL, pempass);
--- a/apps/pkcs7.c
+++ b/apps/pkcs7.c
@@ -82,15 +82,19 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat;
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
-	int ret=0;
+	int ret=1;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	apps_startup();
@@ -134,11 +138,13 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -161,14 +167,18 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 #endif
 		ret = 1;
 		goto end;
 		}
 	ERR_load_crypto_strings();
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -301,5 +311,5 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/pkcs8.c
+++ b/apps/pkcs8.c
@@ -63,7 +63,6 @@
 #include <openssl/evp.h>
 #include <openssl/pkcs12.h>
 #include "apps.h"
 #define PROG pkcs8_main
 int MAIN(int, char **);
@@ -83,13 +82,18 @@ int MAIN(int argc, char **argv)
 	int nocrypt = 0;
 	X509_SIG *p8;
 	PKCS8_PRIV_KEY_INFO *p8inf;
-	EVP_PKEY *pkey;
+	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
@@ -143,11 +147,13 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
 #endif
 		else if (!strcmp (*args, "-in")) {
 			if (args[1]) {
 				args++;
@@ -180,11 +186,15 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
 		return (1);
 	}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -219,12 +229,13 @@ int MAIN(int argc, char **argv)
 	if (topk8)
 		{
 		BIO_free(in); /* Not needed in this section */
-		pkey = load_key(bio_err, infile, informat, passin, e, "key");
+		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
 		if (!pkey) {
 			return (1);
 		}
 		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken))) {
-			BIO_printf(bio_err, "Error converting key\n", outfile);
+			BIO_printf(bio_err, "Error converting key\n");
 			ERR_print_errors(bio_err);
 			return (1);
 		}
@@ -241,14 +252,14 @@ int MAIN(int argc, char **argv)
 			if(passout) p8pass = passout;
 			else {
 				p8pass = pass;
-				EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1);
+				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
 					return (1);
 			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
 					p8pass, strlen(p8pass),
 					NULL, 0, iter, p8inf))) {
-				BIO_printf(bio_err, "Error encrypting key\n",
+				BIO_printf(bio_err, "Error encrypting key\n");
 								 outfile);
 				ERR_print_errors(bio_err);
 				return (1);
 			}
@@ -291,27 +302,27 @@ int MAIN(int argc, char **argv)
 		}
 		if (!p8) {
-			BIO_printf (bio_err, "Error reading key\n", outfile);
+			BIO_printf (bio_err, "Error reading key\n");
 			ERR_print_errors(bio_err);
 			return (1);
 		}
 		if(passin) p8pass = passin;
 		else {
 			p8pass = pass;
-			EVP_read_pw_string(pass, 50, "Enter Password:", 0);
+			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
 		}
 		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
 		X509_SIG_free(p8);
 	}
 	if (!p8inf) {
-		BIO_printf(bio_err, "Error decrypting key\n", outfile);
+		BIO_printf(bio_err, "Error decrypting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
 	}
 	if (!(pkey = EVP_PKCS82PKEY(p8inf))) {
-		BIO_printf(bio_err, "Error converting key\n", outfile);
+		BIO_printf(bio_err, "Error converting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
 	}
@@ -347,6 +358,7 @@ int MAIN(int argc, char **argv)
 			return (1);
 	}
 	end:
 	EVP_PKEY_free(pkey);
 	BIO_free_all(out);
 	BIO_free(in);
--- a/apps/progs.h
+++ b/apps/progs.h
@@ -17,8 +17,6 @@ extern int rsa_main(int argc,char *argv[]);
 extern int rsautl_main(int argc,char *argv[]);
 extern int dsa_main(int argc,char *argv[]);
 extern int dsaparam_main(int argc,char *argv[]);
 extern int ecdsa_main(int argc,char *argv[]);
 extern int ecdsaparam_main(int argc,char *argv[]);
 extern int x509_main(int argc,char *argv[]);
 extern int genrsa_main(int argc,char *argv[]);
 extern int gendsa_main(int argc,char *argv[]);
@@ -37,7 +35,9 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
 #ifndef OPENSSL_NO_ENGINE
 extern int engine_main(int argc,char *argv[]);
 #endif
 extern int ocsp_main(int argc,char *argv[]);
 #define FUNC_TYPE_GENERAL	1
@@ -80,12 +80,6 @@ FUNCTION functions[] = {
 #endif
 #ifndef OPENSSL_NO_DSA
 	{FUNC_TYPE_GENERAL,"dsaparam",dsaparam_main},
 #endif
 #ifndef OPENSSL_NO_ECDSA
 	{FUNC_TYPE_GENERAL,"ecdsa",ecdsa_main},
 #endif
 #ifndef OPENSSL_NO_ECDSA
 	{FUNC_TYPE_GENERAL,"ecdsaparam",ecdsaparam_main},
 #endif
 	{FUNC_TYPE_GENERAL,"x509",x509_main},
 #ifndef OPENSSL_NO_RSA
@@ -100,7 +94,9 @@ FUNCTION functions[] = {
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_client",s_client_main},
 #endif
 #ifndef OPENSSL_NO_SPEED
 	{FUNC_TYPE_GENERAL,"speed",speed_main},
 #endif
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_time",s_time_main},
 #endif
@@ -119,7 +115,9 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
 #ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
 #endif
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
--- a/apps/progs.pl
+++ b/apps/progs.pl
@@ -33,8 +33,6 @@ foreach (@ARGV)
 		{ print "#ifndef OPENSSL_NO_RSA\n${str}#endif\n";  }
 	elsif ( ($_ =~ /^dsa$/) || ($_ =~ /^gendsa$/) || ($_ =~ /^dsaparam$/))
 		{ print "#ifndef OPENSSL_NO_DSA\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^ecdsa$/) || ($_ =~ /^ecdsaparam$/))
 		{ print "#ifndef OPENSSL_NO_ECDSA\n${str}#endif\n";}
 	elsif ( ($_ =~ /^dh$/) || ($_ =~ /^gendh$/) || ($_ =~ /^dhparam$/))
 		{ print "#ifndef OPENSSL_NO_DH\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^pkcs12$/))
--- a/apps/rand.c
+++ b/apps/rand.c
@@ -76,7 +76,9 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -84,7 +86,9 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	apps_startup();
@@ -92,6 +96,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto err;
 	badopt = 0;
 	i = 0;
 	while (!badopt && argv[++i] != NULL)
@@ -103,6 +110,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(argv[i], "-engine") == 0)
 			{
 			if ((argv[i+1] != NULL) && (engine == NULL))
@@ -110,6 +118,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
 #endif
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -147,13 +156,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, "-out file             - write to file\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
@@ -210,5 +223,5 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/req.c
+++ b/apps/req.c
@@ -73,6 +73,7 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
 #include "../crypto/cryptlib.h"
 #define SECTION		"req"
@@ -134,7 +135,6 @@ static int req_check_len(int len,int n_min,int n_max);
 static int check_end(char *str, char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
 static CONF *config=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
@@ -142,7 +142,6 @@ static int batch=0;
 #define TYPE_RSA	1
 #define TYPE_DSA	2
 #define TYPE_DH		3
 #define TYPE_ECDSA	4
 int MAIN(int, char **);
@@ -152,10 +151,7 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_DSA
 	DSA *dsa_params=NULL;
 #endif
-#ifndef OPENSSL_NO_ECDSA
+	unsigned long nmflag = 0, reqflag = 0;
 	ECDSA *ecdsa_params = NULL;
 #endif
 	unsigned long nmflag = 0;
 	int ex=1,x509=0,days=30;
 	X509 *x509ss=NULL;
 	X509_REQ *req=NULL;
@@ -166,7 +162,9 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0,subject=0,pubkey=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	const EVP_CIPHER *cipher=NULL;
@@ -180,7 +178,8 @@ int MAIN(int argc, char **argv)
 	const EVP_MD *md_alg=NULL,*digest=EVP_md5();
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
-	MS_STATIC char config_name[256];
+	char *to_free;
 	long errline;
 #endif
 	req_conf = NULL;
@@ -213,11 +212,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -309,7 +310,7 @@ int MAIN(int argc, char **argv)
 						goto end;
 						}
-					dtmp=X509_get_pubkey(xtmp);
+					if ((dtmp=X509_get_pubkey(xtmp)) == NULL) goto end;
 					if (dtmp->type == EVP_PKEY_DSA)
 						dsa_params=DSAparams_dup(dtmp->pkey.dsa);
 					EVP_PKEY_free(dtmp);
@@ -321,63 +322,11 @@ int MAIN(int argc, char **argv)
 						}
 					}
 				BIO_free(in);
 				in=NULL;
 				newkey=BN_num_bits(dsa_params->p);
 				in=NULL;
 				}
 			else 
 #endif
 #ifndef OPENSSL_NO_ECDSA
 				if (strncmp("ecdsa:",p,4) == 0)
 				{
 				X509 *xtmp=NULL;
 				EVP_PKEY *dtmp;
 				pkey_type=TYPE_ECDSA;
 				p+=6;
 				if ((in=BIO_new_file(p,"r")) == NULL)
 					{
 					perror(p);
 					goto end;
 					}
 				if ((ecdsa_params = PEM_read_bio_ECDSAParameters(in, NULL, NULL, NULL)) == NULL)
 					{
 					ERR_clear_error();
 					(void)BIO_reset(in);
 					if ((xtmp=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL)
 						{	
 						BIO_printf(bio_err,"unable to load ECDSA parameters from file\n");
 						goto end;
 						}
 					dtmp=X509_get_pubkey(xtmp);
 					if (dtmp->type == EVP_PKEY_ECDSA)
 						ecdsa_params = ECDSAParameters_dup(dtmp->pkey.ecdsa);
 					EVP_PKEY_free(dtmp);
 					X509_free(xtmp);
 					if (ecdsa_params == NULL)
 						{
 						BIO_printf(bio_err,"Certificate does not contain ECDSA parameters\n");
 						goto end;
 						}
 					}
 				BIO_free(in);
 				in=NULL;
 				{
 				BIGNUM *order = BN_new();
 				if (!order)
 					goto end;
 				if (!EC_GROUP_get_order(ecdsa_params->group, order, NULL))
 					goto end;
 				newkey = BN_num_bits(order);
 				BN_free(order);
 				}
 				}
 			else
 #endif
 #ifndef OPENSSL_NO_DH
 				if (strncmp("dh:",p,4) == 0)
 				{
@@ -411,6 +360,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
 		else if (strcmp(*argv,"-reqopt") == 0)
 			{
 			if (--argc < 1) goto bad;
 			if (!set_cert_ex(&reqflag, *(++argv))) goto bad;
 			}
 		else if (strcmp(*argv,"-subject") == 0)
 			subject=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -478,7 +432,9 @@ bad:
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device\n");
 #endif
 		BIO_printf(bio_err," -subject       output the request's subject\n");
 		BIO_printf(bio_err," -passin        private key password source\n");
 		BIO_printf(bio_err," -key file      use the private key contained in file\n");
@@ -489,7 +445,6 @@ bad:
 		BIO_printf(bio_err,"                the random number generator\n");
 		BIO_printf(bio_err," -newkey rsa:bits generate a new RSA key of 'bits' in size\n");
 		BIO_printf(bio_err," -newkey dsa:file generate a new DSA key, parameters taken from CA in 'file'\n");
 		BIO_printf(bio_err," -newkey ecdsa:file generate a new ECDSA key, parameters taken from CA in 'file'\n");
 		BIO_printf(bio_err," -[digest]      Digest to sign with (md5, sha1, md2, mdc2, md4)\n");
 		BIO_printf(bio_err," -config file   request template file.\n");
 		BIO_printf(bio_err," -subj arg      set or modify request subject\n");
@@ -504,6 +459,8 @@ bad:
 		BIO_printf(bio_err," -extensions .. specify certificate extension section (override value in config file)\n");
 		BIO_printf(bio_err," -reqexts ..    specify request extension section (override value in config file)\n");
 		BIO_printf(bio_err," -utf8          input characters are UTF8 (default ASCII)\n");
 		BIO_printf(bio_err," -nameopt arg    - various certificate name options\n");
 		BIO_printf(bio_err," -reqopt arg    - various request text options\n\n");
 		goto end;
 		}
@@ -519,22 +476,15 @@ bad:
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		{
+		p=to_free=make_config_name();
 		strcpy(config_name,X509_get_default_cert_area());
 #ifndef OPENSSL_SYS_VMS
 		strcat(config_name,"/");
 #endif
 		strcat(config_name,OPENSSL_CONF);
 		p=config_name;
 		}
 	default_config_file=p;
 	config=NCONF_new(NULL);
-	i=NCONF_load(config, p);
+	i=NCONF_load(config, p, &errline);
 #endif
 	if (template != NULL)
 		{
-		long errline;
+		long errline = -1;
 		if( verbose )
 			BIO_printf(bio_err,"Using configuration from %s\n",template);
@@ -560,6 +510,8 @@ bad:
 	if (req_conf != NULL)
 		{
 		if (!load_config(bio_err, req_conf))
 			goto end;
 		p=NCONF_get_string(req_conf,NULL,"oid_file");
 		if (p == NULL)
 			ERR_clear_error();
@@ -671,11 +623,13 @@ bad:
 	if ((in == NULL) || (out == NULL))
 		goto end;
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if (keyfile != NULL)
 		{
-		pkey = load_key(bio_err, keyfile, keyform, passin, e,
+		pkey = load_key(bio_err, keyfile, keyform, 0, passin, e,
 			"Private Key");
 		if (!pkey)
 			{
@@ -683,7 +637,7 @@ bad:
 			   message */
 			goto end;
 			}
-		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA || EVP_PKEY_type(pkey->type) == EVP_PKEY_ECDSA)
+		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA)
 			{
 			char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 			if (randfile == NULL)
@@ -707,15 +661,14 @@ bad:
 				newkey=DEFAULT_KEY_LENGTH;
 			}
-		if (newkey < MIN_KEY_LENGTH && (pkey_type == TYPE_RSA || pkey_type == TYPE_DSA))
+		if (newkey < MIN_KEY_LENGTH)
 		/* TODO: appropriate minimal keylength for the different algorithm (esp. ECDSA) */
 			{
 			BIO_printf(bio_err,"private key length is too short,\n");
 			BIO_printf(bio_err,"it needs to be at least %d bits, not %d\n",MIN_KEY_LENGTH,newkey);
 			goto end;
 			}
 		BIO_printf(bio_err,"Generating a %d bit %s private key\n",
-			newkey,(pkey_type == TYPE_RSA)?"RSA":(pkey_type == TYPE_DSA)?"DSA":"ECDSA");
+			newkey,(pkey_type == TYPE_RSA)?"RSA":"DSA");
 		if ((pkey=EVP_PKEY_new()) == NULL) goto end;
@@ -737,14 +690,6 @@ bad:
 			dsa_params=NULL;
 			}
 #endif
 #ifndef OPENSSL_NO_ECDSA
 			if (pkey_type == TYPE_ECDSA)
 			{
 			if (!ECDSA_generate_key(ecdsa_params)) goto end;
 			if (!EVP_PKEY_assign_ECDSA(pkey, ecdsa_params)) goto end;
 			ecdsa_params = NULL;
 			}
 #endif
 		app_RAND_write_file(randfile, bio_err);
@@ -850,10 +795,6 @@ loop:
 #ifndef OPENSSL_NO_DSA
 		if (pkey->type == EVP_PKEY_DSA)
 			digest=EVP_dss1();
 #endif
 #ifndef OPENSSL_NO_ECDSA
 		if (pkey->type == EVP_PKEY_ECDSA)
 			digest=EVP_ecdsa();
 #endif
 		if (req == NULL)
 			{
@@ -885,19 +826,20 @@ loop:
 			/* Set version to V3 */
 			if(!X509_set_version(x509ss, 2)) goto end;
 			if (serial)
-				X509_set_serialNumber(x509ss, serial);
+				{
 				if (!X509_set_serialNumber(x509ss, serial)) goto end;
 				}
 			else
-				ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L);
+				{
 				if (!ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L)) goto end;
 				}
-			X509_set_issuer_name(x509ss,
+			if (!X509_set_issuer_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
-				X509_REQ_get_subject_name(req));
+			if (!X509_gmtime_adj(X509_get_notBefore(x509ss),0)) goto end;
-			X509_gmtime_adj(X509_get_notBefore(x509ss),0);
+			if (!X509_gmtime_adj(X509_get_notAfter(x509ss), (long)60*60*24*days)) goto end;
-			X509_gmtime_adj(X509_get_notAfter(x509ss),
+			if (!X509_set_subject_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
 				(long)60*60*24*days);
 			X509_set_subject_name(x509ss,
 				X509_REQ_get_subject_name(req));
 			tmppkey = X509_REQ_get_pubkey(req);
-			X509_set_pubkey(x509ss,tmppkey);
+			if (!tmppkey || !X509_set_pubkey(x509ss,tmppkey)) goto end;
 			EVP_PKEY_free(tmppkey);
 			/* Set up V3 context struct */
@@ -1046,9 +988,9 @@ loop:
 	if (text)
 		{
 		if (x509)
-			X509_print(out,x509ss);
+			X509_print_ex(out, x509ss, nmflag, reqflag);
 		else	
-			X509_REQ_print(out,req);
+			X509_REQ_print_ex(out, req, nmflag, reqflag);
 		}
 	if(subject) 
@@ -1118,6 +1060,10 @@ loop:
 		}
 	ex=0;
 end:
 #ifndef MONOLITH
 	if(to_free)
 		OPENSSL_free(to_free);
 #endif
 	if (ex)
 		{
 		ERR_print_errors(bio_err);
@@ -1134,12 +1080,9 @@ end:
 	OBJ_cleanup();
 #ifndef OPENSSL_NO_DSA
 	if (dsa_params != NULL) DSA_free(dsa_params);
 #endif
 #ifndef OPENSSL_NO_ECDSA
 	if (ecdsa_params != NULL) ECDSA_free(ecdsa_params);
 #endif
 	apps_shutdown();
-	EXIT(ex);
+	OPENSSL_EXIT(ex);
 	}
 static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
@@ -1199,71 +1142,29 @@ static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
 		}
 	if(!i) goto err;
-	X509_REQ_set_pubkey(req,pkey);
+	if (!X509_REQ_set_pubkey(req,pkey)) goto err;
 	ret=1;
 err:
 	return(ret);
 	}
 /*
 * subject is expected to be in the format /type0=value0/type1=value1/type2=...
 * where characters may be escaped by \
 */
 static int build_subject(X509_REQ *req, char *subject, unsigned long chtype)
 	{
-	X509_NAME *n = NULL;
+	X509_NAME *n;
-	int i, nid, ne_num=0;
+	if (!(n = do_subject(subject, chtype)))
-
+		return 0;
 	char *ne_name = NULL;
 	char *ne_value = NULL;
 	char *tmp = NULL;
 	char *p[2];
 	char *str_list[256];
 	p[0] = ",/";
        p[1] = "=";
 	n = X509_NAME_new();
 	tmp = strtok(subject, p[0]);
 	while((tmp != NULL) && (ne_num < (sizeof str_list/sizeof *str_list)))
 		{
 		char *token = tmp;
 		while (token[0] == ' ')
 			token++;
 		str_list[ne_num] = token;
 		tmp = strtok(NULL, p[0]);
 		ne_num++;
 		}
 	for(i = 0; i < ne_num; i++)
 		{
 		ne_name  = strtok(str_list[i], p[1]);
 		ne_value = strtok(NULL, p[1]);
 		if ((nid=OBJ_txt2nid(ne_name)) == NID_undef)
 			{
 			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_name);
 			continue;
 			}
 		if (ne_value == NULL)
 			{
 			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_name);
 			continue;
 			}
 		if (!X509_NAME_add_entry_by_NID(n, nid, chtype, (unsigned char*)ne_value, -1,-1,0))
 			{
 			X509_NAME_free(n);
 			return 0;
 			}
 		}
 	if (!X509_REQ_set_subject_name(req, n))
 		{
 		X509_NAME_free(n);
 		return 0;
 		}
 	X509_NAME_free(n);
 	return 1;
 }
@@ -1322,13 +1223,19 @@ start:		for (;;)
 				}
 			/* If OBJ not recognised ignore it */
 			if ((nid=OBJ_txt2nid(type)) == NID_undef) goto start;
 			if(strlen(v->name) > sizeof buf-9)
 			   {
 			   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 			   return 0;
 			   }
 			sprintf(buf,"%s_default",v->name);
 			if ((def=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				def="";
 				}
 			sprintf(buf,"%s_value",v->name);
 			if ((value=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
@@ -1338,11 +1245,17 @@ start:		for (;;)
 			sprintf(buf,"%s_min",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_min))
 				{
 				ERR_clear_error();
 				n_min = -1;
 				}
 			sprintf(buf,"%s_max",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_max))
 				{
 				ERR_clear_error();
 				n_max = -1;
 				}
 			if (!add_DN_object(subj,v->value,def,value,nid,
 				n_min,n_max, chtype))
@@ -1375,6 +1288,12 @@ start2:			for (;;)
 				if ((nid=OBJ_txt2nid(type)) == NID_undef)
 					goto start2;
 				if(strlen(v->name) > sizeof buf-9)
 				   {
 				   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 				   return 0;
 				   }
 				sprintf(buf,"%s_default",type);
 				if ((def=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
@@ -1478,6 +1397,7 @@ start:
 	(void)BIO_flush(bio_err);
 	if(value != NULL)
 		{
 		OPENSSL_assert(strlen(value) < sizeof buf-2);
 		strcpy(buf,value);
 		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
@@ -1487,7 +1407,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,1024,stdin);
+			fgets(buf,sizeof buf,stdin);
 			}
 		else
 			{
@@ -1536,6 +1456,7 @@ start:
 	(void)BIO_flush(bio_err);
 	if (value != NULL)
 		{
 		OPENSSL_assert(strlen(value) < sizeof buf-2);
 		strcpy(buf,value);
 		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
@@ -1545,7 +1466,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,1024,stdin);
+			fgets(buf,sizeof buf,stdin);
 			}
 		else
 			{
--- a/apps/rsa.c
+++ b/apps/rsa.c
@@ -79,6 +79,9 @@
 * -des		- encrypt output if PEM format with DES in cbc mode
 * -des3	- encrypt output if PEM format
 * -idea	- encrypt output if PEM format
 * -aes128	- encrypt output if PEM format
 * -aes192	- encrypt output if PEM format
 * -aes256	- encrypt output if PEM format
 * -text	- print a text version
 * -modulus	- print the RSA key modulus
 * -check	- verify key consistency
@@ -101,7 +104,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	int modulus=0;
 	apps_startup();
@@ -110,6 +115,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -150,11 +158,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -195,6 +205,10 @@ bad:
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
 #endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -202,13 +216,17 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
 		goto end;
 		}
 	ERR_load_crypto_strings();
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -228,12 +246,12 @@ bad:
 		if (pubin)
 			pkey = load_pubkey(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat),
+					FORMAT_IISSGC : informat), 1,
 				passin, e, "Public Key");
 		else
 			pkey = load_key(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat),
+					FORMAT_IISSGC : informat), 1,
 				passin, e, "Private Key");
 		if (pkey != NULL)
@@ -359,7 +377,7 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #else /* !OPENSSL_NO_RSA */
--- a/apps/rsautl.c
+++ b/apps/rsautl.c
@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
 #endif
 	char *keyfile = NULL;
 	char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
 	int keyform = FORMAT_PEM;
@@ -104,6 +106,9 @@ int MAIN(int argc, char **argv)
 	argv++;
 	if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	pad = RSA_PKCS1_PADDING;
@@ -122,9 +127,11 @@ int MAIN(int argc, char **argv)
 		} else if (strcmp(*argv,"-keyform") == 0) {
 			if (--argc < 1) badarg = 1;
 			keyform=str2fmt(*(++argv));
 #ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
 			if (--argc < 1) badarg = 1;
 			engine = *(++argv);
 #endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -159,19 +166,21 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
 	switch(key_type) {
 		case KEY_PRIVKEY:
-		pkey = load_key(bio_err, keyfile, keyform,
+		pkey = load_key(bio_err, keyfile, keyform, 0,
 			NULL, e, "Private Key");
 		break;
 		case KEY_PUBKEY:
-		pkey = load_pubkey(bio_err, keyfile, keyform,
+		pkey = load_pubkey(bio_err, keyfile, keyform, 0,
 			NULL, e, "Public Key");
 		break;
@@ -302,7 +311,9 @@ static void usage()
 	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
 	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
 #endif
 }
--- a/apps/s_apps.h
+++ b/apps/s_apps.h
@@ -112,6 +112,14 @@
 #include <sys/types.h>
 #include <openssl/opensslconf.h>
 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
 #include <conio.h>
 #endif
 #ifdef OPENSSL_SYS_MSDOS
 #define _kbhit kbhit
 #endif
 #if defined(OPENSSL_SYS_VMS) && !defined(FD_SET)
 /* VAX C does not defined fd_set and friends, but it's actually quite simple */
 /* These definitions are borrowed from SOCKETSHR.	/Richard Levitte */
--- a/apps/s_cb.c
+++ b/apps/s_cb.c
@@ -134,7 +134,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	err=	X509_STORE_CTX_get_error(ctx);
 	depth=	X509_STORE_CTX_get_error_depth(ctx);
-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,256);
+	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,sizeof buf);
 	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
 	if (!ok)
 		{
@@ -154,7 +154,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	switch (ctx->error)
 		{
 	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,256);
+		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,sizeof buf);
 		BIO_printf(bio_err,"issuer= %s\n",buf);
 		break;
 	case X509_V_ERR_CERT_NOT_YET_VALID:
--- a/apps/s_client.c
+++ b/apps/s_client.c
@@ -136,8 +136,12 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"
-#ifdef OPENSSL_SYS_WINDOWS
+#ifdef OPENSSL_SYS_WINCE
-#include <conio.h>
+/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
 #ifdef fileno
 #undef fileno
 #endif
 #define fileno(a) (int)_fileno(a)
 #endif
@@ -213,8 +217,10 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\" is supported.\n");
+	BIO_printf(bio_err,"                 only \"smtp\" and \"pop3\" are supported.\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 #endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
@@ -241,14 +247,16 @@ int MAIN(int argc, char **argv)
 	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
-	int smtp_starttls = 0;
+	int starttls_proto = 0;
 	int prexit = 0, vflags = 0;
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	ENGINE *e=NULL;
-#ifdef OPENSSL_SYS_WINDOWS
+#endif
 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
 	struct timeval tv;
 #endif
@@ -271,6 +279,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	if (	((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
 		((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
 		((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
@@ -400,15 +411,19 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			++argv;
 			if (strcmp(*argv,"smtp") == 0)
-				smtp_starttls = 1;
+				starttls_proto = 1;
 			else if (strcmp(*argv,"pop3") == 0)
 				starttls_proto = 2;
 			else
 				goto bad;
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if	(strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -430,6 +445,13 @@ bad:
 		goto end;
 		}
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine_id, 1);
 #endif
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
 		{
@@ -452,11 +474,6 @@ bad:
 			}
 		}
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
        e = setup_engine(bio_err, engine_id, 1);
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -568,12 +585,18 @@ re_start:
 	sbuf_off=0;
 	/* This is an ugly hack that does a lot of assumptions */
-	if (smtp_starttls)
+	if (starttls_proto == 1)
 		{
 		BIO_read(sbio,mbuf,BUFSIZZ);
 		BIO_printf(sbio,"STARTTLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
 	if (starttls_proto == 2)
 		{
 		BIO_read(sbio,mbuf,BUFSIZZ);
 		BIO_printf(sbio,"STLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
 	for (;;)
 		{
@@ -594,11 +617,11 @@ re_start:
 				print_stuff(bio_c_out,con,full_log);
 				if (full_log > 0) full_log--;
-				if (smtp_starttls)
+				if (starttls_proto)
 					{
 					BIO_printf(bio_err,"%s",mbuf);
 					/* We don't need to know any more */
-					smtp_starttls = 0;
+					starttls_proto = 0;
 					}
 				if (reconnect)
@@ -617,7 +640,7 @@ re_start:
 		if (!ssl_pending)
 			{
-#ifndef OPENSSL_SYS_WINDOWS
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
 			if (tty_on)
 				{
 				if (read_tty)  FD_SET(fileno(stdin),&readfds);
@@ -644,8 +667,8 @@ re_start:
 			 * will choke the compiler: if you do have a cast then
 			 * you can either go for (int *) or (void *).
 			 */
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-			/* Under Windows we make the assumption that we can
+                        /* Under Windows/DOS we make the assumption that we can
 			 * always write to the tty: therefore if we need to
 			 * write to the tty we just fall through. Otherwise
 			 * we timeout the select every second and see if there
@@ -659,7 +682,11 @@ re_start:
 					tv.tv_usec = 0;
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						 NULL,&tv);
 #if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 					if(!i && (!_kbhit() || !read_tty) ) continue;
 #else
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
 #endif
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
 					 NULL,NULL);
 			}
@@ -743,8 +770,8 @@ re_start:
 				goto shut;
 				}
 			}
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-		/* Assume Windows can always write */
+		/* Assume Windows/DOS can always write */
 		else if (!ssl_pending && write_tty)
 #else
 		else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
@@ -824,8 +851,12 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				}
 			}
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
 #if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 		else if (_kbhit())
 #else
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
 #endif
 #else
 		else if (FD_ISSET(fileno(stdin),&readfds))
 #endif
@@ -889,16 +920,16 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
+	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
-	if (mbuf != NULL) { memset(mbuf,0,BUFSIZZ); OPENSSL_free(mbuf); }
+	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
@@ -927,10 +958,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			for (i=0; i<sk_X509_num(sk); i++)
 				{
 				X509_NAME_oneline(X509_get_subject_name(
-					sk_X509_value(sk,i)),buf,BUFSIZ);
+					sk_X509_value(sk,i)),buf,sizeof buf);
 				BIO_printf(bio,"%2d s:%s\n",i,buf);
 				X509_NAME_oneline(X509_get_issuer_name(
-					sk_X509_value(sk,i)),buf,BUFSIZ);
+					sk_X509_value(sk,i)),buf,sizeof buf);
 				BIO_printf(bio,"   i:%s\n",buf);
 				if (c_showcerts)
 					PEM_write_bio_X509(bio,sk_X509_value(sk,i));
@@ -945,10 +976,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			if (!(c_showcerts && got_a_chain)) /* Redundant if we showed the whole chain */
 				PEM_write_bio_X509(bio,peer);
 			X509_NAME_oneline(X509_get_subject_name(peer),
-				buf,BUFSIZ);
+				buf,sizeof buf);
 			BIO_printf(bio,"subject=%s\n",buf);
 			X509_NAME_oneline(X509_get_issuer_name(peer),
-				buf,BUFSIZ);
+				buf,sizeof buf);
 			BIO_printf(bio,"issuer=%s\n",buf);
 			}
 		else
@@ -970,7 +1001,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			{
 			BIO_printf(bio,"---\nNo client certificate CA names sent\n");
 			}
-		p=SSL_get_shared_ciphers(s,buf,BUFSIZ);
+		p=SSL_get_shared_ciphers(s,buf,sizeof buf);
 		if (p != NULL)
 			{
 			/* This works only for SSL 2.  In later protocol
--- a/apps/s_server.c
+++ b/apps/s_server.c
@@ -140,8 +140,12 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"
-#ifdef OPENSSL_SYS_WINDOWS
+#ifdef OPENSSL_SYS_WINCE
-#include <conio.h>
+/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
 #ifdef fileno
 #undef fileno
 #endif
 #define fileno(a) (int)_fileno(a)
 #endif
 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
@@ -234,7 +238,9 @@ static int s_msg=0;
 static int s_quiet=0;
 static int hack=0;
 #ifndef OPENSSL_NO_ENGINE
 static char *engine_id=NULL;
 #endif
 static const char *session_id_prefix=NULL;
 #ifdef MONOLITH
@@ -259,7 +265,9 @@ static void s_server_init(void)
 	s_msg=0;
 	s_quiet=0;
 	hack=0;
 #ifndef OPENSSL_NO_ENGINE
 	engine_id=NULL;
 #endif
 	}
 #endif
@@ -308,7 +316,9 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -HTTP         - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
        BIO_printf(bio_err,"                 with the assumption it contains a complete HTTP response.\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 #endif
 	BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
@@ -320,10 +330,10 @@ static char **local_argv;
 static int ebcdic_new(BIO *bi);
 static int ebcdic_free(BIO *a);
 static int ebcdic_read(BIO *b, char *out, int outl);
-static int ebcdic_write(BIO *b, char *in, int inl);
+static int ebcdic_write(BIO *b, const char *in, int inl);
-static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr);
+static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr);
 static int ebcdic_gets(BIO *bp, char *buf, int size);
-static int ebcdic_puts(BIO *bp, char *str);
+static int ebcdic_puts(BIO *bp, const char *str);
 #define BIO_TYPE_EBCDIC_FILTER	(18|0x0200)
 static BIO_METHOD methods_ebcdic=
@@ -388,7 +398,7 @@ static int ebcdic_read(BIO *b, char *out, int outl)
 	return(ret);
 }
-static int ebcdic_write(BIO *b, char *in, int inl)
+static int ebcdic_write(BIO *b, const char *in, int inl)
 {
 	EBCDIC_OUTBUFF *wbuf;
 	int ret=0;
@@ -421,7 +431,7 @@ static int ebcdic_write(BIO *b, char *in, int inl)
 	return(ret);
 }
-static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)
+static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr)
 {
 	long ret;
@@ -440,7 +450,7 @@ static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)
 static int ebcdic_gets(BIO *bp, char *buf, int size)
 {
-	int i, ret;
+	int i, ret=0;
 	if (bp->next_bio == NULL) return(0);
 /*	return(BIO_gets(bp->next_bio,buf,size));*/
 	for (i=0; i<size-1; ++i)
@@ -459,7 +469,7 @@ static int ebcdic_gets(BIO *bp, char *buf, int size)
 	return (ret < 0 && i == 0) ? ret : i;
 }
-static int ebcdic_puts(BIO *bp, char *str)
+static int ebcdic_puts(BIO *bp, const char *str)
 {
 	if (bp->next_bio == NULL) return(0);
 	return ebcdic_write(bp, str, strlen(str));
@@ -482,7 +492,9 @@ int MAIN(int argc, char *argv[])
 	int no_tmp_rsa=0,no_dhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e=NULL;
 #endif
 	char *inrand=NULL;
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
@@ -504,6 +516,9 @@ int MAIN(int argc, char *argv[])
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	verify_depth=0;
 #ifdef FIONBIO
 	s_nbio=0;
@@ -654,11 +669,13 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			session_id_prefix = *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -680,6 +697,13 @@ bad:
 		goto end;
 		}
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine_id, 1);
 #endif
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
 		{
@@ -702,7 +726,7 @@ bad:
 			}
 		}
-#if !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_DSA) || !defined(OPENSSL_NO_ECDSA)
+#if !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_DSA)
 	if (nocert)
 #endif
 		{
@@ -712,11 +736,6 @@ bad:
 		s_dkey_file=NULL;
 		}
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
        e = setup_engine(bio_err, engine_id, 1);
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -857,7 +876,7 @@ end:
 		bio_s_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
@@ -894,7 +913,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 	unsigned long l;
 	SSL *con=NULL;
 	BIO *sbio;
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
 	struct timeval tv;
 #endif
@@ -968,7 +987,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		if (!read_from_sslcon)
 			{
 			FD_ZERO(&readfds);
-#ifndef OPENSSL_SYS_WINDOWS
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
 			FD_SET(fileno(stdin),&readfds);
 #endif
 			FD_SET(s,&readfds);
@@ -978,8 +997,8 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			 * the compiler: if you do have a cast then you can either
 			 * go for (int *) or (void *).
 			 */
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-			/* Under Windows we can't select on stdin: only
+                        /* Under DOS (non-djgpp) and Windows we can't select on stdin: only
 			 * on sockets. As a workaround we timeout the select every
 			 * second and check for any keypress. In a proper Windows
 			 * application we wouldn't do this because it is inefficient.
@@ -1173,7 +1192,7 @@ err:
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
-		memset(buf,0,bufsize);
+		OPENSSL_cleanse(buf,bufsize);
 		OPENSSL_free(buf);
 		}
 	if (ret >= 0)
@@ -1225,14 +1244,14 @@ static int init_ssl_connection(SSL *con)
 		{
 		BIO_printf(bio_s_out,"Client certificate\n");
 		PEM_write_bio_X509(bio_s_out,peer);
-		X509_NAME_oneline(X509_get_subject_name(peer),buf,BUFSIZ);
+		X509_NAME_oneline(X509_get_subject_name(peer),buf,sizeof buf);
 		BIO_printf(bio_s_out,"subject=%s\n",buf);
-		X509_NAME_oneline(X509_get_issuer_name(peer),buf,BUFSIZ);
+		X509_NAME_oneline(X509_get_issuer_name(peer),buf,sizeof buf);
 		BIO_printf(bio_s_out,"issuer=%s\n",buf);
 		X509_free(peer);
 		}
-	if (SSL_get_shared_ciphers(con,buf,BUFSIZ) != NULL)
+	if (SSL_get_shared_ciphers(con,buf,sizeof buf) != NULL)
 		BIO_printf(bio_s_out,"Shared ciphers:%s\n",buf);
 	str=SSL_CIPHER_get_name(SSL_get_current_cipher(con));
 	BIO_printf(bio_s_out,"CIPHER is %s\n",(str != NULL)?str:"(NONE)");
@@ -1240,7 +1259,13 @@ static int init_ssl_connection(SSL *con)
 	if (SSL_ctrl(con,SSL_CTRL_GET_FLAGS,0,NULL) &
 		TLS1_FLAGS_TLS_PADDING_BUG)
 		BIO_printf(bio_s_out,"Peer has incorrect TLSv1 block padding\n");
-
+#ifndef OPENSSL_NO_KRB5
 	if (con->kssl_ctx->client_princ != NULL)
 		{
 		BIO_printf(bio_s_out,"Kerberos peer principal is %s\n",
 			con->kssl_ctx->client_princ);
 		}
 #endif /* OPENSSL_NO_KRB5 */
 	return(1);
 	}
@@ -1392,7 +1417,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 			else
 				{
 				BIO_printf(bio_s_out,"read R BLOCK\n");
-#ifndef OPENSSL_SYS_MSDOS
+#if !defined(OPENSSL_SYS_MSDOS) && !defined(__DJGPP__)
 				sleep(1);
 #endif
 				continue;
--- a/apps/s_socket.c
+++ b/apps/s_socket.c
@@ -83,9 +83,9 @@ typedef unsigned int u_int;
 static struct hostent *GetHostByName(char *name);
 #ifdef OPENSSL_SYS_WINDOWS
-static void sock_cleanup(void);
+static void ssl_sock_cleanup(void);
 #endif
-static int sock_init(void);
+static int ssl_sock_init(void);
 static int init_client_ip(int *sock,unsigned char ip[4], int port);
 static int init_server(int *sock, int port);
 static int init_server_long(int *sock, int port,char *ip);
@@ -118,7 +118,7 @@ static LONG FAR PASCAL topHookProc(HWND hwnd, UINT message, WPARAM wParam,
 		case WM_DESTROY:
 		case WM_CLOSE:
 			SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopWndProc);
-			sock_cleanup();
+			ssl_sock_cleanup();
 			break;
 			}
 		}
@@ -135,26 +135,34 @@ static BOOL CALLBACK enumproc(HWND hwnd,LPARAM lParam)
 #endif /* OPENSSL_SYS_WINDOWS */
 #ifdef OPENSSL_SYS_WINDOWS
-static void sock_cleanup(void)
+static void ssl_sock_cleanup(void)
 	{
 	if (wsa_init_done)
 		{
 		wsa_init_done=0;
 #ifndef OPENSSL_SYS_WINCE
 		WSACancelBlockingCall();
 #endif
 		WSACleanup();
 		}
 	}
 #endif
-static int sock_init(void)
+static int ssl_sock_init(void)
 	{
-#ifdef OPENSSL_SYS_WINDOWS
+#ifdef WATT32
 	extern int _watt_do_exit;
 	_watt_do_exit = 0;
 	dbug_init();
 	if (sock_init())
 		return (0);
 #elif defined(OPENSSL_SYS_WINDOWS)
 	if (!wsa_init_done)
 		{
 		int err;
 #ifdef SIGINT
-		signal(SIGINT,(void (*)(int))sock_cleanup);
+		signal(SIGINT,(void (*)(int))ssl_sock_cleanup);
 #endif
 		wsa_init_done=1;
 		memset(&wsa_state,0,sizeof(wsa_state));
@@ -196,7 +204,7 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port)
 	struct sockaddr_in them;
 	int s,i;
-	if (!sock_init()) return(0);
+	if (!ssl_sock_init()) return(0);
 	memset((char *)&them,0,sizeof(them));
 	them.sin_family=AF_INET;
@@ -261,7 +269,7 @@ static int init_server_long(int *sock, int port, char *ip)
 	struct sockaddr_in server;
 	int s= -1,i;
-	if (!sock_init()) return(0);
+	if (!ssl_sock_init()) return(0);
 	memset((char *)&server,0,sizeof(server));
 	server.sin_family=AF_INET;
@@ -318,7 +326,7 @@ static int do_accept(int acc_sock, int *sock, char **host)
 	int len;
 /*	struct linger ling; */
-	if (!sock_init()) return(0);
+	if (!ssl_sock_init()) return(0);
 #ifndef OPENSSL_SYS_WINDOWS
 redoit:
@@ -448,7 +456,7 @@ static int host_ip(char *str, unsigned char ip[4])
 		{ /* do a gethostbyname */
 		struct hostent *he;
-		if (!sock_init()) return(0);
+		if (!ssl_sock_init()) return(0);
 		he=GetHostByName(str);
 		if (he == NULL)
@@ -529,9 +537,12 @@ static struct hostent *GetHostByName(char *name)
 		ret=gethostbyname(name);
 		if (ret == NULL) return(NULL);
 		/* else add to cache */
-		strncpy(ghbn_cache[lowi].name,name,128);
+		if(strlen(name) < sizeof ghbn_cache[0].name)
-		memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
+			{
-		ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
+			strcpy(ghbn_cache[lowi].name,name);
 			memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
 			ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
 			}
 		return(ret);
 		}
 	else
--- a/apps/s_time.c
+++ b/apps/s_time.c
@@ -85,7 +85,7 @@
 #include OPENSSL_UNISTD
 #endif
-#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
+#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
 #define TIMES
 #endif
@@ -109,10 +109,6 @@
 #include <sys/timeb.h>
 #endif
 #ifdef _AIX
 #include <sys/select.h>
 #endif
 #if defined(sun) || defined(__ultrix)
 #define _POSIX_SOURCE
 #include <limits.h>
@@ -150,6 +146,8 @@
 #undef BUFSIZZ
 #define BUFSIZZ 1024*10
 #define MYBUFSIZ 1024*8
 #undef min
 #undef max
 #define min(a,b) (((a) < (b)) ? (a) : (b))
@@ -324,6 +322,11 @@ static int parseArgs(int argc, char **argv)
 		{
 		if (--argc < 1) goto bad;
 		s_www_path= *(++argv);
 		if(strlen(s_www_path) > MYBUFSIZ-100)
 			{
 			BIO_printf(bio_err,"-www option too long\n");
 			badop=1;
 			}
 		}
 	else if(strcmp(*argv,"-bugs") == 0)
 	    st_bugs=1;
@@ -484,7 +487,7 @@ int MAIN(int argc, char **argv)
 	tm_Time_F(START);
 	for (;;)
 		{
-		if (finishtime < time(NULL)) break;
+		if (finishtime < (long)time(NULL)) break;
 #ifdef WIN32_STUFF
 		if( flushWinMsgs(0) == -1 )
@@ -535,9 +538,9 @@ int MAIN(int argc, char **argv)
 		}
 	totalTime += tm_Time_F(STOP); /* Add the time for this iteration */
-	i=(int)(time(NULL)-finishtime+maxTime);
+	i=(int)((long)time(NULL)-finishtime+maxTime);
 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);
 	/* Now loop and time connections using the same session id over and over */
@@ -569,7 +572,7 @@ next:
 	nConn = 0;
 	totalTime = 0.0;
-	finishtime=time(NULL)+maxTime;
+	finishtime=(long)time(NULL)+maxTime;
 	printf( "starting\n" );
 	bytes_read=0;
@@ -577,7 +580,7 @@ next:
 	for (;;)
 		{
-		if (finishtime < time(NULL)) break;
+		if (finishtime < (long)time(NULL)) break;
 #ifdef WIN32_STUFF
 		if( flushWinMsgs(0) == -1 )
@@ -627,7 +630,7 @@ next:
 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);
 	ret=0;
 end:
@@ -639,7 +642,7 @@ end:
 		tm_ctx=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 /***********************************************************************
--- a/apps/sess_id.c
+++ b/apps/sess_id.c
@@ -273,7 +273,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (x != NULL) SSL_SESSION_free(x);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static SSL_SESSION *load_sess_id(char *infile, int format)
--- a/apps/smime.c
+++ b/apps/smime.c
@@ -104,11 +104,22 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
        int keyform = FORMAT_PEM;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	args = argv + 1;
 	ret = 1;
 	apps_startup();
 	if (bio_err == NULL)
 		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	while (!badarg && *args && *args[0] == '-') {
 		if (!strcmp (*args, "-encrypt")) operation = SMIME_ENCRYPT;
 		else if (!strcmp (*args, "-decrypt")) operation = SMIME_DECRYPT;
@@ -128,6 +139,14 @@ int MAIN(int argc, char **argv)
 				cipher = EVP_rc2_cbc();
 		else if (!strcmp (*args, "-rc2-64")) 
 				cipher = EVP_rc2_64_cbc();
 #endif
 #ifndef OPENSSL_NO_AES
 		else if (!strcmp(*args,"-aes128"))
 				cipher = EVP_aes_128_cbc();
 		else if (!strcmp(*args,"-aes192"))
 				cipher = EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256"))
 				cipher = EVP_aes_256_cbc();
 #endif
 		else if (!strcmp (*args, "-text")) 
 				flags |= PKCS7_TEXT;
@@ -149,6 +168,10 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
 		else if (!strcmp (*args, "-nooldmime"))
 				flags |= PKCS7_NOOLDMIMETYPE;
 		else if (!strcmp (*args, "-crlfeol"))
 				flags |= PKCS7_CRLFEOL;
 		else if (!strcmp (*args, "-crl_check"))
 				store_flags |= X509_V_FLAG_CRL_CHECK;
 		else if (!strcmp (*args, "-crl_check_all"))
@@ -159,11 +182,13 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
 #ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 			if (args[1]) {
 				args++;
 				engine = *args;
 			} else badarg = 1;
 #endif
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -283,6 +308,10 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-rc2-40        encrypt with RC2-40 (default)\n");
 		BIO_printf (bio_err, "-rc2-64        encrypt with RC2-64\n");
 		BIO_printf (bio_err, "-rc2-128       encrypt with RC2-128\n");
 #endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 		BIO_printf (bio_err, "               encrypt PEM output with cbc aes\n");
 #endif
 		BIO_printf (bio_err, "-nointern      don't search certificates in message for signer\n");
 		BIO_printf (bio_err, "-nosigs        don't verify message signature\n");
@@ -309,7 +338,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
 		BIO_printf (bio_err, "-crl_check     check revocation status of signer's certificate using CRLs\n");
 		BIO_printf (bio_err, "-crl_check_all check revocation status of signer's certificate chain using CRLs\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
@@ -318,7 +349,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -407,7 +440,7 @@ int MAIN(int argc, char **argv)
 	} else keyfile = NULL;
 	if(keyfile) {
-		key = load_key(bio_err, keyfile, keyform, passin, e,
+		key = load_key(bio_err, keyfile, keyform, 0, passin, e,
 			       "signing key file");
 		if (!key) {
 			goto end;
@@ -450,7 +483,10 @@ int MAIN(int argc, char **argv)
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
 	} else if(operation == SMIME_SIGN) {
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		BIO_reset(in);
+		if (BIO_reset(in) != 0 && (flags & PKCS7_DETACHED)) {
 		  BIO_printf(bio_err, "Can't rewind input file\n");
 		  goto end;
 		}
 	} else {
 		if(informat == FORMAT_SMIME) 
 			p7 = SMIME_read_PKCS7(in, &indata);
@@ -490,9 +526,9 @@ int MAIN(int argc, char **argv)
 	} else if(operation == SMIME_VERIFY) {
 		STACK_OF(X509) *signers;
 		if(PKCS7_verify(p7, other, store, indata, out, flags)) {
-			BIO_printf(bio_err, "Verification Successful\n");
+			BIO_printf(bio_err, "Verification successful\n");
 		} else {
-			BIO_printf(bio_err, "Verification Failure\n");
+			BIO_printf(bio_err, "Verification failure\n");
 			goto end;
 		}
 		signers = PKCS7_get0_signers(p7, other, flags);
--- a/apps/speed.c
+++ b/apps/speed.c
@@ -58,6 +58,8 @@
 /* most of this code has been pilfered from my libdes speed.c program */
 #ifndef OPENSSL_NO_SPEED
 #undef SECONDS
 #define SECONDS		3	
 #define RSA_SECONDS	10
@@ -131,7 +133,7 @@
 #endif
 #ifndef OPENSSL_NO_DES
-#include <openssl/des_old.h>
+#include <openssl/des.h>
 #endif
 #ifndef OPENSSL_NO_AES
 #include <openssl/aes.h>
@@ -187,7 +189,8 @@
 /* The following if from times(3) man page.  It may need to be changed */
 #ifndef HZ
-# ifdef _SC_CLK_TCK
+# if defined(_SC_CLK_TCK) \
     && (!defined(OPENSSL_SYS_VMS) || __CTRL_VER >= 70000000)
 #  define HZ ((double)sysconf(_SC_CLK_TCK))
 # else
 #  ifndef CLK_TCK
@@ -369,14 +372,18 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 	long count=0,save_count=0;
 	int i,j,k;
 #if !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_DSA)
 	long rsa_count;
 #endif
 #ifndef OPENSSL_NO_RSA
 	unsigned rsa_num;
 	long rsa_count;
 #endif
 	unsigned char md[EVP_MAX_MD_SIZE];
 #ifndef OPENSSL_NO_MD2
@@ -437,9 +444,9 @@ int MAIN(int argc, char **argv)
 	unsigned char iv[MAX_BLOCK_SIZE/8];
 #ifndef OPENSSL_NO_DES
 	DES_cblock *buf_as_des_cblock = NULL;
-	static des_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
+	static DES_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
-	static des_cblock key2={0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
+	static DES_cblock key2={0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
-	static des_cblock key3={0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
+	static DES_cblock key3={0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
 	DES_key_schedule sch;
 	DES_key_schedule sch2;
 	DES_key_schedule sch3;
@@ -515,6 +522,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 #ifndef OPENSSL_NO_RSA
 	memset(rsa_key,0,sizeof(rsa_key));
 	for (i=0; i<RSA_NUM; i++)
@@ -527,7 +537,7 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 #ifndef OPENSSL_NO_DES
-	buf_as_des_cblock = (des_cblock *)buf;
+	buf_as_des_cblock = (DES_cblock *)buf;
 #endif
 	if ((buf2=(unsigned char *)OPENSSL_malloc((int)BUFSIZE)) == NULL)
 		{
@@ -584,6 +594,7 @@ int MAIN(int argc, char **argv)
 			j--;	/* Otherwise, -elapsed gets confused with
 				   an algorithm. */
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
 			{
 			argc--;
@@ -600,6 +611,7 @@ int MAIN(int argc, char **argv)
 			   means all of them should be run) */
 			j--;
 			}
 #endif
 #ifdef HAVE_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
@@ -856,10 +868,12 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err,"\n");
 			BIO_printf(bio_err,"Available options:\n");
-#ifdef TIMES
+#if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
 #ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 #endif
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
@@ -1136,7 +1150,7 @@ int MAIN(int argc, char **argv)
 		HMAC_CTX_init(&hctx);
 		HMAC_Init_ex(&hctx,(unsigned char *)"This is a key...",
-			16,EVP_md5());
+			16,EVP_md5(), NULL);
 		for (j=0; j<SIZE_NUM; j++)
 			{
@@ -1144,9 +1158,9 @@ int MAIN(int argc, char **argv)
 			Time_F(START);
 			for (count=0,run=1; COND(c[D_HMAC][j]); count++)
 				{
-				HMAC_Init_ex(&hctx,NULL,0,NULL);
+				HMAC_Init_ex(&hctx,NULL,0,NULL,NULL);
-                                HMAC_Update(&hctx,buf,lengths[j]);
+				HMAC_Update(&hctx,buf,lengths[j]);
-                                HMAC_Final(&hctx,&(hmac[0]),NULL);
+				HMAC_Final(&hctx,&(hmac[0]),NULL);
 				}
 			d=Time_F(STOP);
 			print_result(D_HMAC,j,count,d);
@@ -1387,6 +1401,7 @@ int MAIN(int argc, char **argv)
 				else
 					EVP_EncryptFinal_ex(&ctx,buf,&outl);
 				d=Time_F(STOP);
 				EVP_CIPHER_CTX_cleanup(&ctx);
 				}
 			if (evp_md)
 				{
@@ -1598,7 +1613,7 @@ show_res:
 		printf("%s ",RC4_options());
 #endif
 #ifndef OPENSSL_NO_DES
-		printf("%s ",des_options());
+		printf("%s ",DES_options());
 #endif
 #ifndef OPENSSL_NO_AES
 		printf("%s ",AES_options());
@@ -1622,7 +1637,7 @@ show_res:
 #endif
 #ifdef HZ
 #define as_string(s) (#s)
-		printf("HZ=%g", HZ);
+		printf("HZ=%g", (double)HZ);
 # ifdef _SC_CLK_TCK
 		printf(" [sysconf value]");
 # endif
@@ -1723,7 +1738,7 @@ end:
 			DSA_free(dsa_key[i]);
 #endif
 	apps_shutdown();
-	EXIT(mret);
+	OPENSSL_EXIT(mret);
 	}
 static void print_message(const char *s, long num, int length)
@@ -1776,7 +1791,7 @@ static char *sstrsep(char **string, const char *delim)
    if (**string == 0)
        return NULL;
-    memset(isdelim, 0, 256);
+    memset(isdelim, 0, sizeof isdelim);
    isdelim[0] = 1;
    while (*delim)
@@ -1933,3 +1948,4 @@ static int do_multi(int multi)
 	return 1;
 	}
 #endif
 #endif
--- a/apps/spkac.c
+++ b/apps/spkac.c
@@ -92,12 +92,17 @@ int MAIN(int argc, char **argv)
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	apps_startup();
 	if (!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	prog=argv[0];
 	argc--;
 	argv++;
@@ -138,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -168,7 +175,9 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
 #endif
 		goto end;
 		}
@@ -178,12 +187,14 @@ bad:
 		goto end;
 	}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if(keyfile) {
 		pkey = load_key(bio_err,
 				strcmp(keyfile, "-") ? keyfile : NULL,
-				FORMAT_PEM, passin, e, "private key");
+				FORMAT_PEM, 1, passin, e, "private key");
 		if(!pkey) {
 			goto end;
 		}
@@ -292,5 +303,5 @@ end:
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/verify.c
+++ b/apps/verify.c
@@ -86,7 +86,9 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -100,6 +102,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	argc--;
 	argv++;
 	for (;;)
@@ -139,11 +144,13 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
 #ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
 				if (--argc < 1) goto end;
 				engine= *(++argv);
 				}
 #endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-ignore_critical") == 0)
@@ -167,7 +174,9 @@ int MAIN(int argc, char **argv)
 			break;
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
@@ -216,7 +225,11 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check] [-engine e] cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," [-engine e]");
 #endif
 		BIO_printf(bio_err," cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
@@ -229,7 +242,7 @@ end:
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
@@ -327,7 +340,8 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 	if (!ok)
 		{
 		X509_NAME_oneline(
-				X509_get_subject_name(ctx->current_cert),buf,256);
+				X509_get_subject_name(ctx->current_cert),buf,
 				sizeof buf);
 		printf("%s\n",buf);
 		printf("error %d at %d depth lookup:%s\n",ctx->error,
 			ctx->error_depth,
--- a/apps/version.c
+++ b/apps/version.c
@@ -122,7 +122,7 @@
 # include <openssl/rc4.h>
 #endif
 #ifndef OPENSSL_NO_DES
-# include <openssl/des_old.h>
+# include <openssl/des.h>
 #endif
 #ifndef OPENSSL_NO_IDEA
 # include <openssl/idea.h>
@@ -186,7 +186,7 @@ int MAIN(int argc, char **argv)
 		printf("%s ",RC4_options());
 #endif
 #ifndef OPENSSL_NO_DES
-		printf("%s ",des_options());
+		printf("%s ",DES_options());
 #endif
 #ifndef OPENSSL_NO_IDEA
 		printf("%s ",idea_options());
@@ -200,5 +200,5 @@ int MAIN(int argc, char **argv)
 	if (dir)  printf("%s\n",SSLeay_version(SSLEAY_DIR));
 end:
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/winrand.c
+++ b/apps/winrand.c
@@ -118,7 +118,6 @@ LRESULT CALLBACK WndProc(HWND hwnd, UINT iMsg, WPARAM wParam, LPARAM lParam)
        HDC hdc;
 	PAINTSTRUCT ps;
        RECT rect;
        char buffer[200];
        static int seeded = 0;
 	switch (iMsg)
--- a/apps/x509.c
+++ b/apps/x509.c
@@ -122,7 +122,7 @@ static char *x509_usage[]={
 " -CAkey arg      - set the CA key, must be PEM format\n",
 "                   missing, it is assumed to be in the CA file.\n",
 " -CAcreateserial - create serial number file if it does not exist\n",
-" -CAserial       - serial file\n",
+" -CAserial arg   - serial file\n",
 " -set_serial     - serial number to use\n",
 " -text           - print the certificate in text form\n",
 " -C              - print out C code forms\n",
@@ -131,7 +131,9 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
 #ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
 #endif
 " -certopt arg    - various certificate text options\n",
 NULL
 };
@@ -183,7 +185,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0, certflag = 0;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 	reqfile=0;
@@ -191,6 +195,9 @@ int MAIN(int argc, char **argv)
 	if (bio_err == NULL)
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 	if (!load_config(bio_err, NULL))
 		goto end;
 	STDout=BIO_new_fp(stdout,BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 	{
@@ -242,7 +249,7 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-CAkeyform") == 0)
 			{
 			if (--argc < 1) goto bad;
-			CAformat=str2fmt(*(++argv));
+			CAkeyformat=str2fmt(*(++argv));
 			}
 		else if (strcmp(*argv,"-days") == 0)
 			{
@@ -351,17 +358,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
-		else if (strcmp(*argv,"-setalias") == 0)
+#ifndef OPENSSL_NO_ENGINE
 			{
 			if (--argc < 1) goto bad;
 			alias= *(++argv);
 			trustout = 1;
 			}
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
 #endif
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
@@ -447,7 +450,9 @@ bad:
 		goto end;
 		}
 #ifndef OPENSSL_NO_ENGINE
        e = setup_engine(bio_err, engine, 0);
 #endif
 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);
@@ -476,7 +481,7 @@ bad:
 	if (extfile)
 		{
-		long errorline;
+		long errorline = -1;
 		X509V3_CTX ctx2;
 		extconf = NCONF_new(NULL);
 		if (!NCONF_load(extconf, extfile,&errorline))
@@ -767,10 +772,11 @@ bad:
 				int y,z;
 				X509_NAME_oneline(X509_get_subject_name(x),
-					buf,256);
+					buf,sizeof buf);
 				BIO_printf(STDout,"/* subject:%s */\n",buf);
 				m=X509_NAME_oneline(
-					X509_get_issuer_name(x),buf,256);
+					X509_get_issuer_name(x),buf,
 					sizeof buf);
 				BIO_printf(STDout,"/* issuer :%s */\n",buf);
 				z=i2d_X509(x,NULL);
@@ -858,18 +864,14 @@ bad:
 				if (Upkey == NULL)
 					{
 					Upkey=load_key(bio_err,
-						keyfile,keyformat, passin, e,
+						keyfile, keyformat, 0,
-						"Private key");
+						passin, e, "Private key");
 					if (Upkey == NULL) goto end;
 					}
 #ifndef OPENSSL_NO_DSA
 		                if (Upkey->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
 #endif
 #ifndef OPENSSL_NO_ECDSA
 				if (Upkey->type == EVP_PKEY_ECDSA)
 					digest=EVP_ecdsa();
 #endif
 				assert(need_rand);
 				if (!sign(x,Upkey,days,clrext,digest,
@@ -881,18 +883,15 @@ bad:
 				if (CAkeyfile != NULL)
 					{
 					CApkey=load_key(bio_err,
-						CAkeyfile,CAkeyformat, passin,
+						CAkeyfile, CAkeyformat,
-						e, "CA Private Key");
+						0, passin, e,
 						"CA Private Key");
 					if (CApkey == NULL) goto end;
 					}
 #ifndef OPENSSL_NO_DSA
 		                if (CApkey->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
 #endif
 #ifndef OPENSSL_NO_ECDSA
 				if (CApkey->type == EVP_PKEY_ECDSA)
 					digest = EVP_ecdsa();
 #endif
 				assert(need_rand);
 				if (!x509_certify(ctx,CAfile,digest,x,xca,
@@ -913,17 +912,17 @@ bad:
 				else
 					{
 					pk=load_key(bio_err,
-						keyfile,FORMAT_PEM, passin, e,
+						keyfile, FORMAT_PEM, 0,
-						"request key");
+						passin, e, "request key");
 					if (pk == NULL) goto end;
 					}
 				BIO_printf(bio_err,"Generating certificate request\n");
 #ifndef OPENSSL_NO_DSA
 		                if (pk->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
-				else if (pk->type == EVP_PKEY_ECDSA)
+#endif
 					digest=EVP_ecdsa();
 				rq=X509_to_X509_REQ(x,pk,digest);
 				EVP_PKEY_free(pk);
@@ -1020,7 +1019,7 @@ end:
 	sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
 	if (passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
@@ -1078,7 +1077,7 @@ static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
 		}
 	else 
 		{
-		if (!a2i_ASN1_INTEGER(io,bs,buf2,1024))
+		if (!a2i_ASN1_INTEGER(io,bs,buf2,sizeof buf2))
 			{
 			BIO_printf(bio_err,"unable to load serial number from %s\n",buf);
 			ERR_print_errors(bio_err);
@@ -1146,7 +1145,7 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 	else if (!(bs = load_serial(CAfile, serialfile, create)))
 		goto end;
-	if (!X509_STORE_add_cert(ctx,x)) goto end;
+/*	if (!X509_STORE_add_cert(ctx,x)) goto end;*/
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */
--- a/bugs/SSLv3
+++ b/bugs/SSLv3
@@ -29,7 +29,7 @@ RC4-MD5, but a re-connect tries to use DES-CBC-SHA.  So netscape, when
 doing a re-connect, always takes the first cipher in the cipher list.
 If we accept a netscape connection, demand a client cert, have a
-non-self-sighed CA which does not have it's CA in netscape, and the
+non-self-signed CA which does not have it's CA in netscape, and the
 browser has a cert, it will crash/hang.  Works for 3.x and 4.xbeta
 Netscape browsers do not really notice the server sending a
--- a/144
+++ b/144
@@ -74,34 +74,27 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		if [ "x$VERSION" = "x2.01" ]; then
+		case "x${VERSION}" in
-		    echo "${MACHINE}-whatever-unixware201"; exit 0
+		    x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
-		elif [ "x$VERSION" = "x2.02" ]; then
+		    x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
-		    echo "${MACHINE}-whatever-unixware202"; exit 0
+		    x2*)   echo "whatever-whatever-unixware2";  exit 0 ;;
-		elif [ "x$VERSION" = "x2.03" ]; then
+		esac
 		    echo "${MACHINE}-whatever-unixware203"; exit 0
 		elif [ "x$VERSION" = "x2.1.1" ]; then
 		    echo "${MACHINE}-whatever-unixware211"; exit 0
 		elif [ "x$VERSION" = "x2.1.2" ]; then
 		    echo "${MACHINE}-whatever-unixware212"; exit 0
 		elif [ "x$VERSION" = "x2.1.3" ]; then
 		    echo "${MACHINE}-whatever-unixware213"; exit 0
 		else
 		    echo "${MACHINE}-whatever-unixware2"; exit 0
 		fi
 		;;
 	    4.2)
-		echo "whatever-whatever-unixware1"; exit 0
+		echo "i386-whatever-unixware1"; exit 0
 		;;
 	    OpenUNIX)
 		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
 		    echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
 		fi
 		;;
 	    5)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
+		case "x${VERSION}" in
-		    echo "${MACHINE}-sco-unixware7"; exit 0
+		    # We hardcode i586 in place of ${MACHINE} for the
-		fi
+		    # following reason. The catch is that even though Pentium
 		    # is minimum requirement for platforms in question,
 		    # ${MACHINE} gets always assigned to i386. Now, problem
 		    # with i386 is that it makes ./config pass 386 to
 		    # ./Configure, which in turn makes make generate
 		    # inefficient SHA-1 (for this moment) code.
 		    x7*)  echo "i586-sco-unixware7";           exit 0 ;;
 		    x8*)  echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
 		esac
 		;;
 	esac
    fi
@@ -196,7 +189,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-bsdi"; exit 0
 	;;
-    FreeBSD:*)
+    FreeBSD:*:*:*386*)
        VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
        MACH=`sysctl -n hw.model`
        ARCH='whatever'
@@ -205,7 +198,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
           *486*       ) MACH="i486"     ;;
           Pentium\ II*) MACH="i686"     ;;
           Pentium*    ) MACH="i586"     ;;
           Alpha*      ) MACH="alpha"    ;;
           *           ) MACH="$MACHINE" ;;
        esac
        case ${MACH} in
@@ -214,6 +206,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
        ;;
    FreeBSD:*)
 	echo "${MACHINE}-whatever-freebsd"; exit 0
 	;;
    NetBSD:*:*:*386*)
        echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
@@ -344,6 +340,17 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	exit 0
 	;;
    *"CRAY T3E")
       echo "t3e-cray-unicosmk"; exit 0;
       ;;
    *CRAY*)
       echo "j90-cray-unicos"; exit 0;
       ;;
    NONSTOP_KERNEL*)
       echo "nsr-tandem-nsk"; exit 0;
       ;;
 esac
 #
@@ -383,18 +390,33 @@ exit 0
 # figure out if gcc is available and if so we use it otherwise
 # we fallback to whatever cc does on the system
-GCCVER=`(gcc --version) 2>/dev/null`
+GCCVER=`(gcc -dumpversion) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
  CC=gcc
-  # then strip off whatever prefix Cygnus prepends the number with...
+  # then strip off whatever prefix egcs prepends the number with...
-  GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+  # Hopefully, this will work for any future prefixes as well.
  GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
  # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
  # does give us what we want though, so we use that.  We just just the
  # major and minor version numbers.
  # peak single digit before and after first dot, e.g. 2.95.1 gives 29
  GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
 else
  CC=cc
 fi
 GCCVER=${GCCVER:-0}
-
+if [ "$SYSTEM" = "HP-UX" ];then
  # By default gcc is a ILP32 compiler (with long long == 64).
  GCC_BITS="32"
  if [ $GCCVER -ge 30 ]; then
    # PA64 support only came in with gcc 3.0.x.
    # We look for the preprocessor symbol __LP64__ indicating
    # 64bit bit long and pointer.  sizeof(int) == 32 on HPUX64.
    if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
      GCC_BITS="64"
    fi
  fi
 fi
 if [ "$SYSTEM" = "SunOS" ]; then
  if [ $GCCVER -ge 30 ]; then
    # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
@@ -435,6 +457,10 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
  fi
 fi
 if [ "${SYSTEM}" = "AIX" ]; then	# favor vendor cc over gcc
    (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
 fi
 CCVER=${CCVER:-0}
 # read the output of the embedded GuessOS 
@@ -447,7 +473,7 @@ echo Operating system: $GUESSOS
 # more time that I want to waste at the moment
 case "$GUESSOS" in
  mips2-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
 	if [ $CPU -ge 4000 ]; then
 		options="$options -mips2"
@@ -455,7 +481,7 @@ case "$GUESSOS" in
 	OUT="irix-$CC"
 	;;
  mips3-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
 	if [ $CPU -ge 5000 ]; then
 		options="$options -mips4"
@@ -471,7 +497,7 @@ case "$GUESSOS" in
 	  echo "         You have about 5 seconds to press Ctrl-C to abort."
 	  (stty -icanon min 0 time 50; read waste) < /dev/tty
 	fi
-        CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+        CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
        CPU=${CPU:-0}
        if [ $CPU -ge 5000 ]; then
                options="$options -mips4"
@@ -510,6 +536,10 @@ EOF
 	${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
 	rm dummy dummy.c
 	;;
  ppc64-*-linux2)
 	#Use the standard target for PPC architecture until we create a
 	#special one for the 64bit architecture.
 	OUT="linux-ppc" ;;
  ppc-*-linux2) OUT="linux-ppc" ;;
  m68k-*-linux*) OUT="linux-m68k" ;;
  ia64-*-linux?) OUT="linux-ia64" ;;
@@ -517,12 +547,13 @@ EOF
  ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
  i386-apple-darwin*) OUT="darwin-i386-cc" ;;
  sparc64-*-linux2)
-	#Before we can uncomment following lines we have to wait at least
+	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
-	#till 64-bit glibc for SPARC is operational:-(
+	echo "         and wish to build 64-bit library, then you have to"
-	#echo "WARNING! If you wish to build 64-bit library, then you have to"
+	echo "         invoke './Configure linux64-sparcv9' *manually*."
-	#echo "         invoke './Configure linux64-sparcv9' *manually*."
+	if [ "$TEST" = "false" ]; then
-	#echo "         Type return if you want to continue, Ctrl-C to abort."
+	  echo "          You have about 5 seconds to press Ctrl-C to abort."
-	#read waste < /dev/tty
+	  (stty -icanon min 0 time 50; read waste) < /dev/tty
 	fi
 	OUT="linux-sparcv9" ;;
  sparc-*-linux2)
 	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
@@ -555,6 +586,7 @@ EOF
  arm*-*-linux2) OUT="linux-elf-arm" ;;
  s390-*-linux2) OUT="linux-s390" ;;
  s390x-*-linux?) OUT="linux-s390x" ;;
  x86_64-*-linux?) OUT="linux-x86_64" ;;
  *-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
          if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
@@ -608,14 +640,24 @@ EOF
  *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
  *-*-sunos4) OUT="sunos-$CC" ;;
  alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
  sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
  ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
  *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
  *-freebsd[1-2]*) OUT="FreeBSD" ;;
  *86*-*-netbsd) OUT="NetBSD-x86" ;;
  sun3*-*-netbsd) OUT="NetBSD-m68" ;;
  *-*-netbsd) OUT="NetBSD-sparc" ;;
  *86*-*-openbsd) OUT="OpenBSD-x86" ;;
  alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
  *86*-*-openbsd) OUT="OpenBSD-i386" ;;
  m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
  m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
  mips*-*-openbsd) OUT="OpenBSD-mips" ;;
  pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
  powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
  sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
  sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
  vax*-*-openbsd) OUT="OpenBSD-vax" ;;
  hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
  *-*-openbsd) OUT="OpenBSD" ;;
  *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
  *-*-osf) OUT="alphaold-cc" ;;
@@ -640,16 +682,27 @@ EOF
  RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
  *-siemens-sysv4) OUT="SINIX" ;;
  *-hpux1*)
-	OUT="hpux-parisc-$CC"
+	if [ $CC = "gcc" ];
 	then
 	  if [ $GCC_BITS = "64" ]; then
 	    OUT="hpux64-parisc-gcc"
 	  else
 	    OUT="hpux-parisc-gcc"
 	  fi
 	else
 	  OUT="hpux-parisc-$CC"
 	fi
 	KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
 	KERNEL_BITS=${KERNEL_BITS:-32}
 	CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
+	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
-	     echo "        Post request to openssl-dev@openssl.org for 32-bit support."
+	     echo "         If you wish to build 32-bit library, the you have to"
 	     echo "         invoke './Configure hpux-ia32-cc' *manually*."
 	     if [ "$TEST" = "false" ]; then
 		echo "         You have about 5 seconds to press Ctrl-C to abort."
 		(stty -icanon min 0 time 50; read waste) < /dev/tty
 	     fi
 	     OUT="hpux64-ia64-cc"
@@ -680,6 +733,9 @@ EOF
  mips-sony-newsos4) OUT="newsos4-gcc" ;;
  *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
  *-*-cygwin) OUT="Cygwin" ;;
  t3e-cray-unicosmk) OUT="cray-t3e" ;;
  j90-cray-unicos) OUT="cray-j90" ;;
  nsr-tandem-nsk) OUT="tandem-c89" ;;
  *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
@@ -714,7 +770,7 @@ case "$GUESSOS" in
  i386-*) options="$options 386" ;;
 esac
-for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 rijndael ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
 do
  if [ ! -d crypto/$i ]
  then
--- a/crypto/Makefile.ssl
+++ b/crypto/Makefile.ssl
@@ -28,7 +28,7 @@ LIBS=
 SDIRS=	md2 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
-	bn ec rsa dsa ecdsa dh dso engine aes \
+	bn ec rsa dsa dh dso engine aes \
 	buffer bio stack lhash rand err objects \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
@@ -36,14 +36,14 @@ GENERAL=Makefile README crypto-lib.com install.com
 LIB= $(TOP)/libcrypto.a
 SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c
+LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c o_str.c
-LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o
+LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o o_str.o
 SRC= $(LIBSRC)
 EXHEADER= crypto.h tmdiff.h opensslv.h opensslconf.h ebcdic.h symhacks.h \
 	ossl_typ.h
-HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h $(EXHEADER)
+HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h o_str.h $(EXHEADER)
 ALL=    $(GENERAL) $(SRC) $(HEADER)
@@ -54,11 +54,11 @@ all: buildinf.h lib subdirs shared
 buildinf.h: ../Makefile.ssl
 	( echo "#ifndef MK1MF_BUILD"; \
-	echo "  /* auto-generated by crypto/Makefile.ssl for crypto/cversion.c */"; \
+	echo '  /* auto-generated by crypto/Makefile.ssl for crypto/cversion.c */'; \
-	echo "  #define CFLAGS \"$(CC) $(CFLAG)\""; \
+	echo '  #define CFLAGS "$(CC) $(CFLAG)"'; \
-	echo "  #define PLATFORM \"$(PLATFORM)\""; \
+	echo '  #define PLATFORM "$(PLATFORM)"'; \
-	echo "  #define DATE \"`date`\""; \
+	echo "  #define DATE \"`LC_ALL=C LC_TIME=C date`\""; \
-	echo "#endif" ) >buildinf.h
+	echo '#endif' ) >buildinf.h
 testapps:
 	if echo ${SDIRS} | fgrep ' des '; \
@@ -98,7 +98,7 @@ lib:	$(LIBOBJ)
 shared:
 	if [ -n "$(SHARED_LIBS)" ]; then \
-		(cd ..; make $(SHARED_LIB)); \
+		(cd ..; $(MAKE) $(SHARED_LIB)); \
 	fi
 libs:
@@ -136,12 +136,12 @@ lint:
 depend:
 	if [ ! -f buildinf.h ]; then touch buildinf.h; fi # fake buildinf.h if it does not exist
-	$(MAKEDEPEND) $(INCLUDE) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDE) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
 	if [ ! -s buildinf.h ]; then rm buildinf.h; fi
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i && echo "making depend in crypto/$$i..." && \
-	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' DEPFLAG='${DEPFLAG}' depend ); \
+	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ); \
 	done;
 clean:
@@ -180,7 +180,7 @@ cversion.o: ../include/openssl/err.h ../include/openssl/lhash.h
 cversion.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 cversion.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 cversion.o: ../include/openssl/symhacks.h buildinf.h cryptlib.h cversion.c
-ebcdic.o: ../include/openssl/opensslconf.h ebcdic.c
+ebcdic.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h ebcdic.c
 ex_data.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 ex_data.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 ex_data.o: ../include/openssl/err.h ../include/openssl/lhash.h
@@ -193,12 +193,18 @@ mem.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem.o: ../include/openssl/symhacks.h cryptlib.h mem.c
 mem_clr.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 mem_clr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem_clr.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem_clr.o: ../include/openssl/symhacks.h mem_clr.c
 mem_dbg.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 mem_dbg.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 mem_dbg.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem_dbg.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem_dbg.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem_dbg.o: ../include/openssl/symhacks.h cryptlib.h mem_dbg.c
 o_str.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_str.c
 o_str.o: o_str.h
 o_time.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_time.c
 o_time.o: o_time.h
 tmdiff.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
--- a/crypto/aes/Makefile.ssl
+++ b/crypto/aes/Makefile.ssl
@@ -26,8 +26,8 @@ TEST=
 APPS=
 LIB=$(TOP)/libcrypto.a
-LIBSRC=aes_core.c aes_misc.c aes_ecb.c aes_cbc.c
+LIBSRC=aes_core.c aes_misc.c aes_ecb.c aes_cbc.c aes_cfb.c aes_ofb.c aes_ctr.c
-LIBOBJ=aes_core.o aes_misc.o aes_ecb.o aes_cbc.o
+LIBOBJ=aes_core.o aes_misc.o aes_ecb.o aes_cbc.o aes_cfb.o aes_ofb.o aes_ctr.o
 SRC= $(LIBSRC)
@@ -54,7 +54,7 @@ files:
 links:
 	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@#$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
+	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
 install: installs
@@ -75,7 +75,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 depend:
-	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -88,10 +88,17 @@ clean:
 aes_cbc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_cbc.o: ../../include/openssl/opensslconf.h aes_cbc.c aes_locl.h
 aes_cfb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_cfb.o: ../../include/openssl/opensslconf.h aes_cfb.c aes_locl.h
 aes_core.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_core.o: ../../include/openssl/opensslconf.h aes_core.c aes_locl.h
+aes_core.o: ../../include/openssl/fips.h ../../include/openssl/opensslconf.h
 aes_core.o: aes_core.c aes_locl.h
 aes_ctr.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_ctr.o: ../../include/openssl/opensslconf.h aes_ctr.c aes_locl.h
 aes_ecb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_ecb.o: ../../include/openssl/opensslconf.h aes_ecb.c aes_locl.h
 aes_misc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_misc.o: ../../include/openssl/opensslconf.h
 aes_misc.o: ../../include/openssl/opensslv.h aes_locl.h aes_misc.c
 aes_ofb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
 aes_ofb.o: ../../include/openssl/opensslconf.h aes_locl.h aes_ofb.c
--- a/crypto/aes/aes.h
+++ b/crypto/aes/aes.h
@@ -1,6 +1,6 @@
 /* crypto/aes/aes.h -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -56,10 +56,13 @@
 #error AES is disabled.
 #endif
-static const int AES_DECRYPT = 0;
+#define AES_ENCRYPT	1
-static const int AES_ENCRYPT = 1;
+#define AES_DECRYPT	0
-#define AES_MAXNR 14 /* array size can't be a const in C */
+
-static const int AES_BLOCK_SIZE = 16; /* bytes */
+/* Because array size can't be a const in C, the following two are macros.
   Both sizes are in bytes. */
 #define AES_MAXNR 14
 #define AES_BLOCK_SIZE 16
 #ifdef  __cplusplus
 extern "C" {
@@ -74,17 +77,42 @@ typedef struct aes_key_st AES_KEY;
 const char *AES_options(void);
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key);
+	AES_KEY *key);
 int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 	AES_KEY *key);
-void AES_encrypt(const unsigned char *in, unsigned char *out, const AES_KEY *key);
+void AES_encrypt(const unsigned char *in, unsigned char *out,
-void AES_decrypt(const unsigned char *in, unsigned char *out, const AES_KEY *key);
+	const AES_KEY *key);
 void AES_decrypt(const unsigned char *in, unsigned char *out,
 	const AES_KEY *key);
 void AES_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	       	     const AES_KEY *key, const int enc);
+	const AES_KEY *key, const int enc);
 void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
-	       	     const unsigned long length, const AES_KEY *key,
+	const unsigned long length, const AES_KEY *key,
-		     unsigned char *ivec, const int enc);
+	unsigned char *ivec, const int enc);
 void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num, const int enc);
 void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num, const int enc);
 void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num, const int enc);
 void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
 			    const int nbits,const AES_KEY *key,
 			    unsigned char *ivec,const int enc);
 void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num);
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char ivec[AES_BLOCK_SIZE],
 	unsigned char ecount_buf[AES_BLOCK_SIZE],
 	unsigned int *num);
 #ifdef  __cplusplus
 }
--- a/crypto/aes/aes_cbc.c
+++ b/crypto/aes/aes_cbc.c
@@ -1,6 +1,6 @@
 /* crypto/aes/aes_cbc.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -49,7 +49,13 @@
 *
 */
 #ifndef AES_DEBUG
 # ifndef NDEBUG
 #  define NDEBUG
 # endif
 #endif
 #include <assert.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"
@@ -57,33 +63,49 @@ void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
 		     const unsigned long length, const AES_KEY *key,
 		     unsigned char *ivec, const int enc) {
-	int n;
+	unsigned long n;
 	unsigned long len = length;
-	unsigned char tmp[16];
+	unsigned char tmp[AES_BLOCK_SIZE];
 	assert(in && out && key && ivec);
 	assert(length % AES_BLOCK_SIZE == 0);
 	assert((AES_ENCRYPT == enc)||(AES_DECRYPT == enc));
-	if (AES_ENCRYPT == enc)
+	if (AES_ENCRYPT == enc) {
-		while (len > 0) {
+		while (len >= AES_BLOCK_SIZE) {
-			for(n=0; n < 16; ++n)
+			for(n=0; n < AES_BLOCK_SIZE; ++n)
 				tmp[n] = in[n] ^ ivec[n];
 			AES_encrypt(tmp, out, key);
-			memcpy(ivec, out, 16);
+			memcpy(ivec, out, AES_BLOCK_SIZE);
-			len -= 16;
+			len -= AES_BLOCK_SIZE;
-			in += 16;
+			in += AES_BLOCK_SIZE;
-			out += 16;
+			out += AES_BLOCK_SIZE;
 		}
-	else
+		if (len) {
-		while (len > 0) {
+			for(n=0; n < len; ++n)
-			memcpy(tmp, in, 16);
+				tmp[n] = in[n] ^ ivec[n];
 			for(n=len; n < AES_BLOCK_SIZE; ++n)
 				tmp[n] = ivec[n];
 			AES_encrypt(tmp, tmp, key);
 			memcpy(out, tmp, AES_BLOCK_SIZE);
 			memcpy(ivec, tmp, AES_BLOCK_SIZE);
 		}			
 	} else {
 		while (len >= AES_BLOCK_SIZE) {
 			memcpy(tmp, in, AES_BLOCK_SIZE);
 			AES_decrypt(in, out, key);
-			for(n=0; n < 16; ++n)
+			for(n=0; n < AES_BLOCK_SIZE; ++n)
 				out[n] ^= ivec[n];
-			memcpy(ivec, tmp, 16);
+			memcpy(ivec, tmp, AES_BLOCK_SIZE);
-			len -= 16;
+			len -= AES_BLOCK_SIZE;
-			in += 16;
+			in += AES_BLOCK_SIZE;
-			out += 16;
+			out += AES_BLOCK_SIZE;
 		}
 		if (len) {
 			memcpy(tmp, in, AES_BLOCK_SIZE);
 			AES_decrypt(tmp, tmp, key);
 			for(n=0; n < len; ++n)
 				out[n] ^= ivec[n];
 			memcpy(ivec, tmp, AES_BLOCK_SIZE);
 		}			
 	}
 }
--- a/crypto/ecdsa/ecs_vrf.c
+++ b/crypto/ecdsa/ecs_vrf.c
@@ -1,4 +1,4 @@
-/* crypto/ecdsa/ecdsa_vrf.c */
+/* crypto/aes/aes_cfb.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
 * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
@@ -17,12 +17,12 @@
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
+ *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
@@ -31,7 +31,7 @@
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -47,10 +47,6 @@
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
 * All rights reserved.
@@ -108,34 +104,147 @@
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
 #include <openssl/ecdsa.h>
 #include <openssl/engine.h>
-/* returns
+#ifndef AES_DEBUG
- *      1: correct signature
+# ifndef NDEBUG
- *      0: incorrect signature
+#  define NDEBUG
- *     -1: error
+# endif
 #endif
 #include <assert.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"
 /* The input and output encrypted as though 128bit cfb mode is being
 * used.  The extra state information to record how much of the
 * 128bit block we have used is contained in *num;
 */
-int ECDSA_do_verify(const unsigned char *dgst, int dgst_len, ECDSA_SIG *sig, ECDSA *ecdsa)
+
 void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num, const int enc) {
 	unsigned int n;
 	unsigned long l = length;
 	unsigned char c;
 	assert(in && out && key && ivec && num);
 	n = *num;
 	if (enc) {
 		while (l--) {
 			if (n == 0) {
 				AES_encrypt(ivec, ivec, key);
 			}
 			ivec[n] = *(out++) = *(in++) ^ ivec[n];
 			n = (n+1) % AES_BLOCK_SIZE;
 		}
 	} else {
 		while (l--) {
 			if (n == 0) {
 				AES_encrypt(ivec, ivec, key);
 			}
 			c = *(in);
 			*(out++) = *(in++) ^ ivec[n];
 			ivec[n] = c;
 			n = (n+1) % AES_BLOCK_SIZE;
 		}
 	}
 	*num=n;
 }
 /* This expects a single block of size nbits for both in and out. Note that
   it corrupts any extra bits in the last byte of out */
 /* Untested, once it is working, it will be optimised */
 void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
 			    const int nbits,const AES_KEY *key,
 			    unsigned char *ivec,const int enc)
    {
    int n;
    unsigned char ovec[AES_BLOCK_SIZE*2];
    assert(in && out && key && ivec);
    if(enc)
 	{
-	return ecdsa->meth->ecdsa_do_verify(dgst, dgst_len, sig, ecdsa);
+	/* construct the new IV */
 	AES_encrypt(ivec,ovec,key);
 	/* encrypt the input */
 	for(n=0 ; n < (nbits+7)/8 ; ++n)
 	    out[n]=in[n]^ovec[n];
 	/* fill in the first half of the new IV with the current IV */
 	memcpy(ovec,ivec,AES_BLOCK_SIZE);
 	/* and put the ciphertext in the second half */
 	memcpy(ovec+AES_BLOCK_SIZE,out,(nbits+7)/8);
 	/* shift ovec left most of the bits... */
 	memmove(ovec,ovec+nbits/8,AES_BLOCK_SIZE+(nbits%8 ? 1 : 0));
 	/* now the remaining bits */
 	if(nbits%8 != 0)
 	    for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
 		{
 		ovec[n]<<=nbits%8;
 		ovec[n]|=ovec[n+1]>>(8-nbits%8);
 		}
 	/* finally, move it back into place */
 	memcpy(ivec,ovec,AES_BLOCK_SIZE);
 	}
-
+    else
-/* returns
+	{
- *      1: correct signature
+	/* construct the new IV in the first half of ovec */
- *      0: incorrect signature
+	AES_encrypt(ivec,ovec,key);
- *     -1: error
+	/* decrypt the input */
- */
+	for(n=0 ; n < (nbits+7)/8 ; ++n)
-int ECDSA_verify(int type, const unsigned char *dgst, int dgst_len, const unsigned char *sigbuf, int sig_len, ECDSA *ecdsa)
+	    out[n]=in[n]^ovec[n];
- 	{
+	/* fill in the first half of the new IV with the current IV */
-	ECDSA_SIG *s;
+	memcpy(ovec,ivec,AES_BLOCK_SIZE);
-	int ret=-1;
+	/* append the ciphertext */
-
+	memcpy(ovec+AES_BLOCK_SIZE,in,(nbits+7)/8);
-	s = ECDSA_SIG_new();
+	/* shift ovec left most of the bits... */
-	if (s == NULL) return(ret);
+	memmove(ovec,ovec+nbits/8,AES_BLOCK_SIZE+(nbits%8 ? 1 : 0));
-	if (d2i_ECDSA_SIG(&s,&sigbuf,sig_len) == NULL) goto err;
+	/* now the remaining bits */
-	ret=ECDSA_do_verify(dgst,dgst_len,s,ecdsa);
+	if(nbits%8 != 0)
-err:
+	    for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-	ECDSA_SIG_free(s);
+		{
-	return(ret);
+		ovec[n]<<=nbits%8;
 		ovec[n]|=ovec[n+1]>>(8-nbits%8);
 		}
 	/* finally, move it back into place */
 	memcpy(ivec,ovec,AES_BLOCK_SIZE);
 	}
    /* it is not necessary to cleanse ovec, since the IV is not secret */
    }
 /* N.B. This expects the input to be packed, MS bit first */
 void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
 		      const unsigned long length, const AES_KEY *key,
 		      unsigned char *ivec, int *num, const int enc)
    {
    unsigned int n;
    unsigned char c[1],d[1];
    assert(in && out && key && ivec && num);
    assert(*num == 0);
    memset(out,0,(length+7)/8);
    for(n=0 ; n < length ; ++n)
 	{
 	c[0]=(in[n/8]&(1 << (7-n%8))) ? 0x80 : 0;
 	AES_cfbr_encrypt_block(c,d,1,key,ivec,enc);
 	out[n/8]=(out[n/8]&~(1 << (7-n%8)))|((d[0]&0x80) >> (n%8));
 	}
    }
 void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
 		      const unsigned long length, const AES_KEY *key,
 		      unsigned char *ivec, int *num, const int enc)
    {
    unsigned int n;
    assert(in && out && key && ivec && num);
    assert(*num == 0);
    for(n=0 ; n < length ; ++n)
 	AES_cfbr_encrypt_block(&in[n],&out[n],8,key,ivec,enc);
    }
--- a/crypto/aes/aes_core.c
+++ b/crypto/aes/aes_core.c
@@ -28,11 +28,20 @@
 /* Note: rewritten a little bit to provide error control and an OpenSSL-
   compatible API */
 #ifndef AES_DEBUG
 # ifndef NDEBUG
 #  define NDEBUG
 # endif
 #endif
 #include <assert.h>
 #include <stdlib.h>
 #include <openssl/aes.h>
 #include <openssl/fips.h>
 #include "aes_locl.h"
 #ifndef OPENSSL_FIPS
 /*
 Te0[x] = S [x].[02, 01, 01, 03];
 Te1[x] = S [x].[03, 02, 01, 01];
@@ -715,16 +724,6 @@ static const u32 rcon[] = {
 	0x1B000000, 0x36000000, /* for 128-bit blocks, Rijndael never uses more than 10 rcon values */
 };
 #define SWAP(x) (_lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00)
 #ifdef _MSC_VER
 #define GETU32(p) SWAP(*((u32 *)(p)))
 #define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }
 #else
 #define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ ((u32)(pt)[2] <<  8) ^ ((u32)(pt)[3]))
 #define PUTU32(ct, st) { (ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); (ct)[2] = (u8)((st) >>  8); (ct)[3] = (u8)(st); }
 #endif
 /**
 * Expand the cipher key into the encryption key schedule.
 */
@@ -754,7 +753,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[2] = GETU32(userKey +  8);
 	rk[3] = GETU32(userKey + 12);
 	if (bits == 128) {
-		for (;;) {
+		while (1) {
 			temp  = rk[3];
 			rk[4] = rk[0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -774,7 +773,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[4] = GETU32(userKey + 16);
 	rk[5] = GETU32(userKey + 20);
 	if (bits == 192) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 5];
 			rk[ 6] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -796,7 +795,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[6] = GETU32(userKey + 24);
 	rk[7] = GETU32(userKey + 28);
 	if (bits == 256) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 7];
 			rk[ 8] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -1259,3 +1258,4 @@ void AES_decrypt(const unsigned char *in, unsigned char *out,
 	PUTU32(out + 12, s3);
 }
 #endif /* ndef OPENSSL_FIPS */
--- a/crypto/aes/aes_ctr.c
+++ b/crypto/aes/aes_ctr.c
@@ -0,0 +1,164 @@
 /* crypto/aes/aes_ctr.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
 * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 */
 #ifndef AES_DEBUG
 # ifndef NDEBUG
 #  define NDEBUG
 # endif
 #endif
 #include <assert.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"
 /* NOTE: CTR mode is big-endian.  The rest of the AES code
 * is endian-neutral. */
 /* increment counter (128-bit int) by 1 */
 static void AES_ctr128_inc(unsigned char *counter) {
 	unsigned long c;
 	/* Grab bottom dword of counter and increment */
 #ifdef L_ENDIAN
 	c = GETU32(counter +  0);
 	c++;
 	PUTU32(counter +  0, c);
 #else
 	c = GETU32(counter + 12);
 	c++;
 	PUTU32(counter + 12, c);
 #endif
 	/* if no overflow, we're done */
 	if (c)
 		return;
 	/* Grab 1st dword of counter and increment */
 #ifdef L_ENDIAN
 	c = GETU32(counter +  4);
 	c++;
 	PUTU32(counter +  4, c);
 #else
 	c = GETU32(counter +  8);
 	c++;
 	PUTU32(counter +  8, c);
 #endif
 	/* if no overflow, we're done */
 	if (c)
 		return;
 	/* Grab 2nd dword of counter and increment */
 #ifdef L_ENDIAN
 	c = GETU32(counter +  8);
 	c++;
 	PUTU32(counter +  8, c);
 #else
 	c = GETU32(counter +  4);
 	c++;
 	PUTU32(counter +  4, c);
 #endif
 	/* if no overflow, we're done */
 	if (c)
 		return;
 	/* Grab top dword of counter and increment */
 #ifdef L_ENDIAN
 	c = GETU32(counter + 12);
 	c++;
 	PUTU32(counter + 12, c);
 #else
 	c = GETU32(counter +  0);
 	c++;
 	PUTU32(counter +  0, c);
 #endif
 }
 /* The input encrypted as though 128bit counter mode is being
 * used.  The extra state information to record how much of the
 * 128bit block we have used is contained in *num, and the
 * encrypted counter is kept in ecount_buf.  Both *num and
 * ecount_buf must be initialised with zeros before the first
 * call to AES_ctr128_encrypt().
 *
 * This algorithm assumes that the counter is in the x lower bits
 * of the IV (ivec), and that the application has full control over
 * overflow and the rest of the IV.  This implementation takes NO
 * responsability for checking that the counter doesn't overflow
 * into the rest of the IV when incremented.
 */
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char ivec[AES_BLOCK_SIZE],
 	unsigned char ecount_buf[AES_BLOCK_SIZE],
 	unsigned int *num) {
 	unsigned int n;
 	unsigned long l=length;
 	assert(in && out && key && counter && num);
 	assert(*num < AES_BLOCK_SIZE);
 	n = *num;
 	while (l--) {
 		if (n == 0) {
 			AES_encrypt(ivec, ecount_buf, key);
 			AES_ctr128_inc(ivec);
 		}
 		*(out++) = *(in++) ^ ecount_buf[n];
 		n = (n+1) % AES_BLOCK_SIZE;
 	}
 	*num=n;
 }
--- a/crypto/aes/aes_ecb.c
+++ b/crypto/aes/aes_ecb.c
@@ -1,6 +1,6 @@
 /* crypto/aes/aes_ecb.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -49,7 +49,13 @@
 *
 */
 #ifndef AES_DEBUG
 # ifndef NDEBUG
 #  define NDEBUG
 # endif
 #endif
 #include <assert.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"
--- a/crypto/aes/aes_locl.h
+++ b/crypto/aes/aes_locl.h
@@ -1,6 +1,6 @@
 /* crypto/aes/aes.h -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -60,9 +60,15 @@
 #include <stdio.h>
 #include <stdlib.h>
 #if defined(__STDC__) || defined(OPENSSL_SYS_VMS) || defined(M_XENIX) || defined(OPENSSL_SYS_MSDOS)
 #include <string.h>
 #if defined(_MSC_VER) && !defined(OPENSSL_SYS_WINCE)
 # define SWAP(x) (_lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00)
 # define GETU32(p) SWAP(*((u32 *)(p)))
 # define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }
 #else
 # define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ ((u32)(pt)[2] <<  8) ^ ((u32)(pt)[3]))
 # define PUTU32(ct, st) { (ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); (ct)[2] = (u8)((st) >>  8); (ct)[3] = (u8)(st); }
 #endif
 typedef unsigned long u32;
--- a/crypto/aes/aes_misc.c
+++ b/crypto/aes/aes_misc.c
@@ -1,6 +1,6 @@
 /* crypto/aes/aes_misc.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
--- a/crypto/ecdsa/ecs_gen.c
+++ b/crypto/ecdsa/ecs_gen.c
@@ -1,4 +1,4 @@
-/* crypto/ecdsa/ecs_gen.c */
+/* crypto/aes/aes_ofb.c -*- mode:C; c-file-style: "eay" -*- */
 /* ====================================================================
 * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
@@ -17,12 +17,12 @@
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
+ *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
@@ -31,7 +31,7 @@
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -47,10 +47,6 @@
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
 * All rights reserved.
@@ -108,26 +104,39 @@
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
 #include <stdio.h>
 #include <time.h>
 #include "cryptlib.h"
 #include <openssl/evp.h>
 #include <openssl/bn.h>
 #include <openssl/ecdsa.h>
 #include <openssl/rand.h>
 #include <openssl/sha.h>
-#ifdef __cplusplus
+#ifndef AES_DEBUG
-extern "C" {
+# ifndef NDEBUG
 #  define NDEBUG
 # endif
 #endif
-ECDSA *ECDSA_generate_parameters(int bits,
+#include <assert.h>
-		unsigned char *seed_in, int seed_len,
+
-		int *counter_ret, unsigned long *h_ret,
+#include <openssl/aes.h>
-		void (*callback)(int, int, void *),
+#include "aes_locl.h"
-		void *cb_arg)
+
-	{
+/* The input and output encrypted as though 128bit ofb mode is being
-		return NULL;
+ * used.  The extra state information to record how much of the
 * 128bit block we have used is contained in *num;
 */
 void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
 	unsigned char *ivec, int *num) {
 	unsigned int n;
 	unsigned long l=length;
 	assert(in && out && key && ivec && num);
 	n = *num;
 	while (l--) {
 		if (n == 0) {
 			AES_encrypt(ivec, ivec, key);
 		}
 		*(out++) = *(in++) ^ ivec[n];
 		n = (n+1) % AES_BLOCK_SIZE;
 	}
-#ifdef  __cplusplus
+
 	*num=n;
 }
 #endif
--- a/crypto/asn1/Makefile.ssl
+++ b/crypto/asn1/Makefile.ssl
--- a/crypto/asn1/a_bitstr.c
+++ b/crypto/asn1/a_bitstr.c
@@ -71,8 +71,6 @@ int i2c_ASN1_BIT_STRING(ASN1_BIT_STRING *a, unsigned char **pp)
 	if (a == NULL) return(0);
 	len=a->length;
 	ret=1+len;
 	if (pp == NULL) return(ret);
 	if (len > 0)
 		{
@@ -100,6 +98,10 @@ int i2c_ASN1_BIT_STRING(ASN1_BIT_STRING *a, unsigned char **pp)
 		}
 	else
 		bits=0;
 	ret=1+len;
 	if (pp == NULL) return(ret);
 	p= *pp;
 	*(p++)=(unsigned char)bits;
@@ -118,6 +120,12 @@ ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a, unsigned char **pp,
 	unsigned char *p,*s;
 	int i;
 	if (len < 1)
 		{
 		i=ASN1_R_STRING_TOO_SHORT;
 		goto err;
 		}
 	if ((a == NULL) || ((*a) == NULL))
 		{
 		if ((ret=M_ASN1_BIT_STRING_new()) == NULL) return(NULL);
@@ -183,7 +191,9 @@ int ASN1_BIT_STRING_set_bit(ASN1_BIT_STRING *a, int n, int value)
 		if (a->data == NULL)
 			c=(unsigned char *)OPENSSL_malloc(w+1);
 		else
-			c=(unsigned char *)OPENSSL_realloc(a->data,w+1);
+			c=(unsigned char *)OPENSSL_realloc_clean(a->data,
 								 a->length,
 								 w+1);
 		if (c == NULL) return(0);
 		if (w+1-a->length > 0) memset(c+a->length, 0, w+1-a->length);
 		a->data=c;
--- a/crypto/asn1/a_bytes.c
+++ b/crypto/asn1/a_bytes.c
@@ -285,7 +285,7 @@ static int asn1_collate_primitive(ASN1_STRING *a, ASN1_CTX *c)
 			goto err;
 			}
-		if (!BUF_MEM_grow(&b,num+os->length))
+		if (!BUF_MEM_grow_clean(&b,num+os->length))
 			{
 			c->error=ERR_R_BUF_LIB;
 			goto err;
--- a/crypto/asn1/a_d2i_fp.c
+++ b/crypto/asn1/a_d2i_fp.c
@@ -149,7 +149,12 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 	ASN1_CTX c;
 	int want=HEADER_SIZE;
 	int eos=0;
 #if defined(__GNUC__) && defined(__ia64)
 	/* pathetic compiler bug in all known versions as of Nov. 2002 */
 	long off=0;
 #else
 	int off=0;
 #endif
 	int len=0;
 	b=BUF_MEM_new();
@@ -166,7 +171,7 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 			{
 			want-=(len-off);
-			if (!BUF_MEM_grow(b,len+want))
+			if (!BUF_MEM_grow_clean(b,len+want))
 				{
 				ASN1err(ASN1_F_ASN1_D2I_BIO,ERR_R_MALLOC_FAILURE);
 				goto err;
@@ -221,18 +226,23 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 			if (want > (len-off))
 				{
 				want-=(len-off);
-				if (!BUF_MEM_grow(b,len+want))
+				if (!BUF_MEM_grow_clean(b,len+want))
 					{
 					ASN1err(ASN1_F_ASN1_D2I_BIO,ERR_R_MALLOC_FAILURE);
 					goto err;
 					}
-				i=BIO_read(in,&(b->data[len]),want);
+				while (want > 0)
 				if (i <= 0)
 					{
-					ASN1err(ASN1_F_ASN1_D2I_BIO,ASN1_R_NOT_ENOUGH_DATA);
+					i=BIO_read(in,&(b->data[len]),want);
-					goto err;
+					if (i <= 0)
 						{
 						ASN1err(ASN1_F_ASN1_D2I_BIO,
 						    ASN1_R_NOT_ENOUGH_DATA);
 						goto err;
 						}
 					len+=i;
 					want -= i;
 					}
 				len+=i;
 				}
 			off+=(int)c.slen;
 			if (eos <= 0)
--- a/crypto/asn1/a_enum.c
+++ b/crypto/asn1/a_enum.c
@@ -151,7 +151,17 @@ ASN1_ENUMERATED *BN_to_ASN1_ENUMERATED(BIGNUM *bn, ASN1_ENUMERATED *ai)
 	else ret->type=V_ASN1_ENUMERATED;
 	j=BN_num_bits(bn);
 	len=((j == 0)?0:((j/8)+1));
-	ret->data=(unsigned char *)OPENSSL_malloc(len+4);
+	if (ret->length < len+4)
 		{
 		unsigned char *new_data=OPENSSL_realloc(ret->data, len+4);
 		if (!new_data)
 			{
 			ASN1err(ASN1_F_BN_TO_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
 			goto err;
 			}
 		ret->data=new_data;
 		}
 	ret->length=BN_bn2bin(bn,ret->data);
 	return(ret);
 err:
--- a/crypto/asn1/a_gentm.c
+++ b/crypto/asn1/a_gentm.c
@@ -115,7 +115,7 @@ err:
 #endif
-int ASN1_GENERALIZEDTIME_check(ASN1_GENERALIZEDTIME *d)
+int ASN1_GENERALIZEDTIME_check(const ASN1_GENERALIZEDTIME *d)
 	{
 	static int min[9]={ 0, 0, 1, 1, 0, 0, 0, 0, 0};
 	static int max[9]={99, 99,12,31,23,59,59,12,59};
--- a/crypto/asn1/a_int.c
+++ b/crypto/asn1/a_int.c
@@ -397,7 +397,16 @@ ASN1_INTEGER *BN_to_ASN1_INTEGER(BIGNUM *bn, ASN1_INTEGER *ai)
 	else ret->type=V_ASN1_INTEGER;
 	j=BN_num_bits(bn);
 	len=((j == 0)?0:((j/8)+1));
-	ret->data=(unsigned char *)OPENSSL_malloc(len+4);
+	if (ret->length < len+4)
 		{
 		unsigned char *new_data=OPENSSL_realloc(ret->data, len+4);
 		if (!new_data)
 			{
 			ASN1err(ASN1_F_BN_TO_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
 			goto err;
 			}
 		ret->data=new_data;
 		}
 	ret->length=BN_bn2bin(bn,ret->data);
 	/* Correct zero case */
 	if(!ret->length)
--- a/crypto/asn1/a_mbstr.c
+++ b/crypto/asn1/a_mbstr.c
@@ -296,7 +296,7 @@ static int in_utf8(unsigned long value, void *arg)
 static int out_utf8(unsigned long value, void *arg)
 {
-	long *outlen;
+	int *outlen;
 	outlen = arg;
 	*outlen += UTF8_putc(NULL, -1, value);
 	return 1;
--- a/crypto/asn1/a_object.c
+++ b/crypto/asn1/a_object.c
@@ -183,8 +183,8 @@ int i2a_ASN1_OBJECT(BIO *bp, ASN1_OBJECT *a)
 	if ((a == NULL) || (a->data == NULL))
 		return(BIO_write(bp,"NULL",4));
-	i=i2t_ASN1_OBJECT(buf,80,a);
+	i=i2t_ASN1_OBJECT(buf,sizeof buf,a);
-	if (i > 80) i=80;
+	if (i > sizeof buf) i=sizeof buf;
 	BIO_write(bp,buf,i);
 	return(i);
 	}
--- a/crypto/asn1/a_set.c
+++ b/crypto/asn1/a_set.c
@@ -118,7 +118,7 @@ int i2d_ASN1_SET(STACK *a, unsigned char **pp, int (*func)(), int ex_tag,
 		}
        pStart  = p; /* Catch the beg of Setblobs*/
-        rgSetBlob = (MYBLOB *)OPENSSL_malloc( sk_num(a) * sizeof(MYBLOB)); /* In this array
+        if (!(rgSetBlob = (MYBLOB *)OPENSSL_malloc( sk_num(a) * sizeof(MYBLOB)))) return 0; /* In this array
 we will store the SET blobs */
        for (i=0; i<sk_num(a); i++)
@@ -135,7 +135,7 @@ SetBlob
 /* Now we have to sort the blobs. I am using a simple algo.
    *Sort ptrs *Copy to temp-mem *Copy from temp-mem to user-mem*/
        qsort( rgSetBlob, sk_num(a), sizeof(MYBLOB), SetBlobCmp);
-        pTempMem = OPENSSL_malloc(totSize);
+        if (!(pTempMem = OPENSSL_malloc(totSize))) return 0;
 /* Copy to temp mem */
        p = pTempMem;
--- a/crypto/asn1/a_sign.c
+++ b/crypto/asn1/a_sign.c
@@ -55,6 +55,59 @@
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
 /* ====================================================================
 * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
 #include <stdio.h>
 #include <time.h>
@@ -90,7 +143,14 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 		else
 			a=algor2;
 		if (a == NULL) continue;
-		if (	(a->parameter == NULL) || 
+                if (type->pkey_type == NID_dsaWithSHA1)
 			{
 			/* special case: RFC 2459 tells us to omit 'parameters'
 			 * with id-dsa-with-sha1 */
 			ASN1_TYPE_free(a->parameter);
 			a->parameter = NULL;
 			}
 		else if ((a->parameter == NULL) || 
 			(a->parameter->type != V_ASN1_NULL))
 			{
 			ASN1_TYPE_free(a->parameter);
@@ -144,9 +204,9 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 err:
 	EVP_MD_CTX_cleanup(&ctx);
 	if (buf_in != NULL)
-		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
+		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}
@@ -169,7 +229,14 @@ int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
 		else
 			a=algor2;
 		if (a == NULL) continue;
-		if (	(a->parameter == NULL) || 
+                if (type->pkey_type == NID_dsaWithSHA1)
 			{
 			/* special case: RFC 2459 tells us to omit 'parameters'
 			 * with id-dsa-with-sha1 */
 			ASN1_TYPE_free(a->parameter);
 			a->parameter = NULL;
 			}
 		else if ((a->parameter == NULL) || 
 			(a->parameter->type != V_ASN1_NULL))
 			{
 			ASN1_TYPE_free(a->parameter);
@@ -220,8 +287,8 @@ int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
 err:
 	EVP_MD_CTX_cleanup(&ctx);
 	if (buf_in != NULL)
-		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
+		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}
--- a/crypto/asn1/a_strex.c
+++ b/crypto/asn1/a_strex.c
@@ -63,6 +63,7 @@
 #include <openssl/asn1.h>
 #include "charmap.h"
 #include "cryptlib.h"
 /* ASN1_STRING_print_ex() and X509_NAME_print_ex().
 * Enhanced string and name printing routines handling
@@ -77,8 +78,8 @@
 /* Three IO functions for sending data to memory, a BIO and
 * and a FILE pointer.
 */
-
+#if 0				/* never used */
-int send_mem_chars(void *arg, const void *buf, int len)
+static int send_mem_chars(void *arg, const void *buf, int len)
 {
 	unsigned char **out = arg;
 	if(!out) return 1;
@@ -86,15 +87,16 @@ int send_mem_chars(void *arg, const void *buf, int len)
 	*out += len;
 	return 1;
 }
 #endif
-int send_bio_chars(void *arg, const void *buf, int len)
+static int send_bio_chars(void *arg, const void *buf, int len)
 {
 	if(!arg) return 1;
 	if(BIO_write(arg, buf, len) != len) return 0;
 	return 1;
 }
-int send_fp_chars(void *arg, const void *buf, int len)
+static int send_fp_chars(void *arg, const void *buf, int len)
 {
 	if(!arg) return 1;
 	if(fwrite(buf, 1, len, arg) != (unsigned int)len) return 0;
@@ -113,14 +115,17 @@ typedef int char_io(void *arg, const void *buf, int len);
 static int do_esc_char(unsigned long c, unsigned char flags, char *do_quotes, char_io *io_ch, void *arg)
 {
 	unsigned char chflgs, chtmp;
-	char tmphex[11];
+	char tmphex[HEX_SIZE(long)+3];
 	if(c > 0xffffffffL)
 		return -1;
 	if(c > 0xffff) {
-		BIO_snprintf(tmphex, 11, "\\W%08lX", c);
+		BIO_snprintf(tmphex, sizeof tmphex, "\\W%08lX", c);
 		if(!io_ch(arg, tmphex, 10)) return -1;
 		return 10;
 	}
 	if(c > 0xff) {
-		BIO_snprintf(tmphex, 11, "\\U%04lX", c);
+		BIO_snprintf(tmphex, sizeof tmphex, "\\U%04lX", c);
 		if(!io_ch(arg, tmphex, 6)) return -1;
 		return 6;
 	}
@@ -194,7 +199,7 @@ static int do_buf(unsigned char *buf, int buflen,
 		if(type & BUF_TYPE_CONVUTF8) {
 			unsigned char utfbuf[6];
 			int utflen;
-			utflen = UTF8_putc(utfbuf, 6, c);
+			utflen = UTF8_putc(utfbuf, sizeof utfbuf, c);
 			for(i = 0; i < utflen; i++) {
 				/* We don't need to worry about setting orflags correctly
 				 * because if utflen==1 its value will be correct anyway 
@@ -240,7 +245,7 @@ static int do_hex_dump(char_io *io_ch, void *arg, unsigned char *buf, int buflen
 * #01234 format.
 */
-int do_dump(unsigned long lflags, char_io *io_ch, void *arg, ASN1_STRING *str)
+static int do_dump(unsigned long lflags, char_io *io_ch, void *arg, ASN1_STRING *str)
 {
 	/* Placing the ASN1_STRING in a temp ASN1_TYPE allows
 	 * the DER encoding to readily obtained
@@ -274,7 +279,7 @@ int do_dump(unsigned long lflags, char_io *io_ch, void *arg, ASN1_STRING *str)
 * otherwise it is the number of bytes per character
 */
-const static char tag2nbyte[] = {
+const static signed char tag2nbyte[] = {
 	-1, -1, -1, -1, -1,	/* 0-4 */
 	-1, -1, -1, -1, -1,	/* 5-9 */
 	-1, -1, 0, -1,		/* 10-13 */
@@ -460,7 +465,7 @@ static int do_name_ex(char_io *io_ch, void *arg, X509_NAME *n,
 		if(fn_opt != XN_FLAG_FN_NONE) {
 			int objlen, fld_len;
 			if((fn_opt == XN_FLAG_FN_OID) || (fn_nid==NID_undef) ) {
-				OBJ_obj2txt(objtmp, 80, fn, 1);
+				OBJ_obj2txt(objtmp, sizeof objtmp, fn, 1);
 				fld_len = 0; /* XXX: what should this be? */
 				objbuf = objtmp;
 			} else {
@@ -543,7 +548,7 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 {
 	ASN1_STRING stmp, *str = &stmp;
 	int mbflag, type, ret;
-	if(!*out || !in) return -1;
+	if(!in) return -1;
 	type = in->type;
 	if((type < 0) || (type > 30)) return -1;
 	mbflag = tag2nbyte[type];
@@ -552,6 +557,6 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 	stmp.data = NULL;
 	ret = ASN1_mbstring_copy(&str, in->data, in->length, mbflag, B_ASN1_UTF8STRING);
 	if(ret < 0) return ret;
-	if(out) *out = stmp.data;
+	*out = stmp.data;
 	return stmp.length;
 }
--- a/crypto/asn1/a_strnid.c
+++ b/crypto/asn1/a_strnid.c
@@ -143,7 +143,7 @@ ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out, const unsigned char *in,
 /* Now the tables and helper functions for the string table:
 */
-/* size limits: this stuff is taken straight from RFC2459 */
+/* size limits: this stuff is taken straight from RFC3280 */
 #define ub_name				32768
 #define ub_common_name			64
@@ -153,6 +153,8 @@ ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out, const unsigned char *in,
 #define ub_organization_unit_name	64
 #define ub_title			64
 #define ub_email_address		128
 #define ub_serial_number		64
 /* This table must be kept in NID order */
@@ -170,9 +172,11 @@ static ASN1_STRING_TABLE tbl_standard[] = {
 {NID_givenName,			1, ub_name, DIRSTRING_TYPE, 0},
 {NID_surname,			1, ub_name, DIRSTRING_TYPE, 0},
 {NID_initials,			1, ub_name, DIRSTRING_TYPE, 0},
 {NID_serialNumber,		1, ub_serial_number, B_ASN1_PRINTABLESTRING, STABLE_NO_MASK},
 {NID_friendlyName,		-1, -1, B_ASN1_BMPSTRING, STABLE_NO_MASK},
 {NID_name,			1, ub_name, DIRSTRING_TYPE, 0},
 {NID_dnQualifier,		-1, -1, B_ASN1_PRINTABLESTRING, STABLE_NO_MASK},
 {NID_domainComponent,		1, -1, B_ASN1_IA5STRING, STABLE_NO_MASK},
 {NID_ms_csp_name,		-1, -1, B_ASN1_BMPSTRING, STABLE_NO_MASK}
 };
@@ -249,4 +253,38 @@ static void st_free(ASN1_STRING_TABLE *tbl)
 	if(tbl->flags & STABLE_FLAGS_MALLOC) OPENSSL_free(tbl);
 }
 IMPLEMENT_STACK_OF(ASN1_STRING_TABLE)
 #ifdef STRING_TABLE_TEST
 main()
 {
 	ASN1_STRING_TABLE *tmp;
 	int i, last_nid = -1;
 	for (tmp = tbl_standard, i = 0;
 		i < sizeof(tbl_standard)/sizeof(ASN1_STRING_TABLE); i++, tmp++)
 		{
 			if (tmp->nid < last_nid)
 				{
 				last_nid = 0;
 				break;
 				}
 			last_nid = tmp->nid;
 		}
 	if (last_nid != 0)
 		{
 		printf("Table order OK\n");
 		exit(0);
 		}
 	for (tmp = tbl_standard, i = 0;
 		i < sizeof(tbl_standard)/sizeof(ASN1_STRING_TABLE); i++, tmp++)
 			printf("Index %d, NID %d, Name=%s\n", i, tmp->nid,
 							OBJ_nid2ln(tmp->nid));
 }
 #endif
--- a/crypto/asn1/a_time.c
+++ b/crypto/asn1/a_time.c
@@ -105,13 +105,16 @@ ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s, time_t t)
 	ts=OPENSSL_gmtime(&t,&data);
 	if (ts == NULL)
 		{
 		ASN1err(ASN1_F_ASN1_TIME_SET, ASN1_R_ERROR_GETTING_TIME);
 		return NULL;
 		}
 	if((ts->tm_year >= 50) && (ts->tm_year < 150))
 					return ASN1_UTCTIME_set(s, t);
 	return ASN1_GENERALIZEDTIME_set(s,t);
 	}
-int ASN1_TIME_check(ASN1_TIME *t)
+int ASN1_TIME_check(const ASN1_TIME *t)
 	{
 	if (t->type == V_ASN1_GENERALIZEDTIME)
 		return ASN1_GENERALIZEDTIME_check(t);
@@ -121,7 +124,8 @@ int ASN1_TIME_check(ASN1_TIME *t)
 	}
 /* Convert an ASN1_TIME structure to GeneralizedTime */
-ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZEDTIME **out)
+ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(const ASN1_TIME *t,
 						   ASN1_GENERALIZEDTIME **out)
 	{
 	ASN1_GENERALIZEDTIME *ret;
 	char *str;
@@ -152,7 +156,7 @@ ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZE
 	if (t->data[0] >= '5') strcpy(str, "19");
 	else strcpy(str, "20");
-	strcat(str, (char *)t->data);
+	BUF_strlcat(str, (char *)t->data, t->length+3);	/* Include space for a '\0' */
 	return ret;
 	}
--- a/crypto/asn1/a_type.c
+++ b/crypto/asn1/a_type.c
@@ -62,7 +62,7 @@
 int ASN1_TYPE_get(ASN1_TYPE *a)
 	{
-	if (a->value.ptr != NULL)
+	if ((a->value.ptr != NULL) || (a->type == V_ASN1_NULL))
 		return(a->type);
 	else
 		return(0);
--- a/crypto/asn1/a_utctm.c
+++ b/crypto/asn1/a_utctm.c
@@ -112,7 +112,7 @@ err:
 #endif
-int ASN1_UTCTIME_check(ASN1_UTCTIME *d)
+int ASN1_UTCTIME_check(const ASN1_UTCTIME *d)
 	{
 	static int min[8]={ 0, 1, 1, 0, 0, 0, 0, 0};
 	static int max[8]={99,12,31,23,59,59,12,59};
@@ -222,6 +222,7 @@ ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s, time_t t)
 int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t)
 	{
 	struct tm *tm;
 	struct tm data;
 	int offset;
 	int year;
@@ -238,7 +239,7 @@ int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t)
 	t -= offset*60; /* FIXME: may overflow in extreme cases */
-	{ struct tm data; tm = OPENSSL_gmtime(&t, &data); }
+	tm = OPENSSL_gmtime(&t, &data);
 #define return_cmp(a,b) if ((a)<(b)) return -1; else if ((a)>(b)) return 1
 	year = g2(s->data);
--- a/crypto/asn1/a_verify.c
+++ b/crypto/asn1/a_verify.c
@@ -103,7 +103,7 @@ int ASN1_verify(int (*i2d)(), X509_ALGOR *a, ASN1_BIT_STRING *signature,
 	EVP_VerifyInit_ex(&ctx,type, NULL);
 	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);
-	memset(buf_in,0,(unsigned int)inl);
+	OPENSSL_cleanse(buf_in,(unsigned int)inl);
 	OPENSSL_free(buf_in);
 	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,
@@ -153,7 +153,7 @@ int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a, ASN1_BIT_STRING *signat
 	EVP_VerifyInit_ex(&ctx,type, NULL);
 	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);
-	memset(buf_in,0,(unsigned int)inl);
+	OPENSSL_cleanse(buf_in,(unsigned int)inl);
 	OPENSSL_free(buf_in);
 	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,
--- a/crypto/asn1/asn1.h
+++ b/crypto/asn1/asn1.h
@@ -70,7 +70,6 @@
 #include <openssl/symhacks.h>
 #include <openssl/e_os2.h>
 #include <openssl/ossl_typ.h>
 #ifdef OPENSSL_BUILD_SHLIBCRYPTO
@@ -133,7 +132,7 @@ extern "C" {
 #define B_ASN1_NUMERICSTRING	0x0001
 #define B_ASN1_PRINTABLESTRING	0x0002
 #define B_ASN1_T61STRING	0x0004
-#define B_ASN1_TELETEXSTRING	0x0008
+#define B_ASN1_TELETEXSTRING	0x0004
 #define B_ASN1_VIDEOTEXSTRING	0x0008
 #define B_ASN1_IA5STRING	0x0010
 #define B_ASN1_GRAPHICSTRING	0x0020
@@ -440,6 +439,8 @@ typedef const ASN1_ITEM * ASN1_ITEM_EXP(void);
 DECLARE_STACK_OF(ASN1_INTEGER)
 DECLARE_ASN1_SET_OF(ASN1_INTEGER)
 DECLARE_STACK_OF(ASN1_GENERALSTRING)
 typedef struct asn1_type_st
 	{
 	int type;
@@ -753,7 +754,7 @@ int ASN1_INTEGER_cmp(ASN1_INTEGER *x, ASN1_INTEGER *y);
 DECLARE_ASN1_FUNCTIONS(ASN1_ENUMERATED)
-int ASN1_UTCTIME_check(ASN1_UTCTIME *a);
+int ASN1_UTCTIME_check(const ASN1_UTCTIME *a);
 ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s,time_t t);
 int ASN1_UTCTIME_set_string(ASN1_UTCTIME *s, char *str); 
 int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t);
@@ -761,7 +762,7 @@ int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t);
 time_t ASN1_UTCTIME_get(const ASN1_UTCTIME *s);
 #endif
-int ASN1_GENERALIZEDTIME_check(ASN1_GENERALIZEDTIME *a);
+int ASN1_GENERALIZEDTIME_check(const ASN1_GENERALIZEDTIME *a);
 ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_set(ASN1_GENERALIZEDTIME *s,time_t t);
 int ASN1_GENERALIZEDTIME_set_string(ASN1_GENERALIZEDTIME *s, char *str); 
@@ -771,6 +772,7 @@ int 	ASN1_OCTET_STRING_cmp(ASN1_OCTET_STRING *a, ASN1_OCTET_STRING *b);
 int 	ASN1_OCTET_STRING_set(ASN1_OCTET_STRING *str, unsigned char *data, int len);
 DECLARE_ASN1_FUNCTIONS(ASN1_VISIBLESTRING)
 DECLARE_ASN1_FUNCTIONS(ASN1_UNIVERSALSTRING)
 DECLARE_ASN1_FUNCTIONS(ASN1_UTF8STRING)
 DECLARE_ASN1_FUNCTIONS(ASN1_NULL)
 DECLARE_ASN1_FUNCTIONS(ASN1_BMPSTRING)
@@ -791,8 +793,8 @@ DECLARE_ASN1_FUNCTIONS(ASN1_GENERALIZEDTIME)
 DECLARE_ASN1_FUNCTIONS(ASN1_TIME)
 ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s,time_t t);
-int ASN1_TIME_check(ASN1_TIME *t);
+int ASN1_TIME_check(const ASN1_TIME *t);
-ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZEDTIME **out);
+ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(const ASN1_TIME *t, ASN1_GENERALIZEDTIME **out);
 int		i2d_ASN1_SET(STACK *a, unsigned char **pp,
 			int (*func)(), int ex_tag, int ex_class, int is_set);
@@ -978,6 +980,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_ASN1_TEMPLATE_D2I			 131
 #define ASN1_F_ASN1_TEMPLATE_EX_D2I			 132
 #define ASN1_F_ASN1_TEMPLATE_NEW			 133
 #define ASN1_F_ASN1_TIME_SET				 175
 #define ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING		 134
 #define ASN1_F_ASN1_TYPE_GET_OCTETSTRING		 135
 #define ASN1_F_ASN1_UNPACK_STRING			 136
@@ -1006,12 +1009,12 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_D2I_X509_PKEY				 159
 #define ASN1_F_I2D_ASN1_TIME				 160
 #define ASN1_F_I2D_DSA_PUBKEY				 161
 #define ASN1_F_I2D_ECDSA_PUBKEY				 174
 #define ASN1_F_I2D_NETSCAPE_RSA				 162
 #define ASN1_F_I2D_PRIVATEKEY				 163
 #define ASN1_F_I2D_PUBLICKEY				 164
 #define ASN1_F_I2D_RSA_PUBKEY				 165
 #define ASN1_F_LONG_C2I					 166
 #define ASN1_F_OID_MODULE_INIT				 174
 #define ASN1_F_PKCS5_PBE2_SET				 167
 #define ASN1_F_X509_CINF_NEW				 168
 #define ASN1_F_X509_CRL_ADD0_REVOKED			 169
@@ -1021,6 +1024,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_X509_PKEY_NEW				 173
 /* Reason codes. */
 #define ASN1_R_ADDING_OBJECT				 171
 #define ASN1_R_AUX_ERROR				 100
 #define ASN1_R_BAD_CLASS				 101
 #define ASN1_R_BAD_OBJECT_HEADER			 102
@@ -1034,6 +1038,8 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_R_DECODE_ERROR				 110
 #define ASN1_R_DECODING_ERROR				 111
 #define ASN1_R_ENCODE_ERROR				 112
 #define ASN1_R_ERROR_GETTING_TIME			 173
 #define ASN1_R_ERROR_LOADING_SECTION			 172
 #define ASN1_R_ERROR_PARSING_SET_ELEMENT		 113
 #define ASN1_R_ERROR_SETTING_CIPHER_PARAMS		 114
 #define ASN1_R_EXPECTING_AN_INTEGER			 115
--- a/Show More
+++ b/Show More