The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.
Thanks to Felix Groebert of the Google Security Team for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 33d5ba8629)
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d3d9eef316)
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1620a2e49c)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6abf)
Conflicts:
ssl/d1_both.c
ssl/ssl_lib.c
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f8e)
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 001235778a)
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017bfd)
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
the session's version (server).
See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 9e189b9dc1)
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e94a6c0ede)
Conflicts:
CHANGES
ssl/s3_srvr.c
The server must send a NewSessionTicket message if it advertised one
in the ServerHello, so make a missing ticket message an alert
in the client.
An equivalent change was independently made in BoringSSL, see commit
6444287806d801b9a45baf1f6f02a0e3a16e144c.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit de2c7504eb)
Conflicts:
CHANGES
The client sends a session ID with the session ticket, and uses
the returned ID to detect resumption, so we do not need to peek
at handshake messages: s->hit tells us explicitly if we're resuming.
An equivalent change was independently made in BoringSSL, see commit
407886f589cf2dbaed82db0a44173036c3bc3317.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 980bc1ec61)
Conflicts:
ssl/d1_clnt.c
ssl/s3_clnt.c
The same change was independently made in BoringSSL, see commit
9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7b3ba508af)
This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a06cd5d056)
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3881d8106d)
Conflicts:
util/mkdef.pl
Tighten client-side session ticket handling during renegotiation:
ensure that the client only accepts a session ticket if the server sends
the extension anew in the ServerHello. Previously, a TLS client would
reuse the old extension state and thus accept a session ticket if one was
announced in the initial ServerHello.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
(cherry picked from commit d663df2399)
Conflicts:
CHANGES
When we're configured with no-ssl3 and we receive an SSL v3 Client Hello, we set
the method to NULL. We didn't used to do that, and it breaks things. This is a
regression introduced in 62f45cc27d. Keep the old
method since the code is not able to deal with a NULL method at this time.
CVE-2014-3569, PR#3571
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 392fa7a952)
CVE-2014-3513
This issue was reported to OpenSSL on 26th September 2014, based on an origi
issue and patch developed by the LibreSSL project. Further analysis of the i
was performed by the OpenSSL team.
The fix was developed by the OpenSSL team.
Reviewed-by: Tim Hudson <tjh@openssl.org>
algorithms MD2 and RC5 don't get built.
Also, disable building the test apps in crypto/des and crypto/pkcs7, as
they have no support at all.
Reviewed-by: Tim Hudson <tjh@openssl.org>
SSL_set_SSL_CTX is normally called for SNI after ClientHello has
received and the digest to use for each certificate has been decided.
The original ssl->cert contains the negotiated digests and is now
copied to the new ssl->cert.
PR: 3560
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Original commit adb46dbc6d)
Use the new constant-time methods consistently in s3_srvr.c
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 455b65dfab)
that bad encryptions are treated like random session keys in constant
time.
(cherry picked from commit adb46dbc6d)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also tweak s3_cbc.c to use new constant-time methods.
Also fix memory leaks from internal errors in RSA_padding_check_PKCS1_OAEP_mgf1
This patch is based on the original RT submission by Adam Langley <agl@chromium.org>,
as well as code from BoringSSL and OpenSSL.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Conflicts:
crypto/rsa/rsa_oaep.c
that fixed PR#3450 where an existing cast masked an issue when i was changed
from int to long in that commit
Picked up on z/linux (s390) where sizeof(int)!=sizeof(long)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b5ff559ff9)
Fix a bug in handling of 128 byte long PSK identity in
psk_client_callback.
OpenSSL supports PSK identities of up to (and including) 128 bytes in
length. PSK identity is obtained via the psk_client_callback,
implementors of which are expected to provide a NULL-terminated
identity. However, the callback is invoked with only 128 bytes of
storage thus making it impossible to return a 128 byte long identity and
the required additional NULL byte.
This CL fixes the issue by passing in a 129 byte long buffer into the
psk_client_callback. As a safety precaution, this CL also zeroes out the
buffer before passing it into the callback, uses strnlen for obtaining
the length of the identity returned by the callback, and aborts the
handshake if the identity (without the NULL terminator) is longer than
128 bytes.
(Original patch amended to achieve strnlen in a different way.)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit be0d851732)
Pull constant-time methods out to a separate header, add tests.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
(cherry picked from commit 9a9b0c0401)
Conflicts:
test/Makefile
Limit the number of empty records that will be processed consecutively
in order to prevent ssl3_get_record from never returning.
Reported by "oftc_must_be_destroyed" and George Kadianakis.
Reviewed-by: Bodo Moeller <bodo@openssl.org>
(cherry picked from commit 3aac17a82f)
