Full range video had been broken by the introduction of the < 2U check
at the following line. The bitstream format kind of implies that the full
and limited ranges use different pix_fmts but that's incorrect since we
have the avctx->color_range flag. So adjust the pixel range index to
be mapped to the same pix_fmts as limited range index.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Further speedups possible by getting rid of exp2f...
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Faster methods possible; since exponent is always a multiple of 1/8.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Much faster generation possible; but array is small so don't want to bloat
the binary.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
May help to prevent incidents like 19e456d48c.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Allow more of the cabac functions to be overridden and avoid generating any
code for unwanted refill functions.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When refilling the low bit buffer after get_cabac count the bits with ctz
if the processor has a fast version.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Ensure that cabac init sets the bitstream pointer to an even value.
It is often faster to load from an aligned boundry
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
This option is only used by mpegvideoenc.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc.
It is a very codec-specific options, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This options is only used by huffyuv, ffvhuv, jpegls, mjpeg,
mpegvideoenc, png, utvideo.
It is a very codec-specific options, so deprecate the global variant.
Set proper limits to the maximum allowed values, and update utvideoenc
tests to use the new option name.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by alac and flac.
They are very codec-specific options, so deprecate the global variants.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc and openh264.
It is a very codec-specific option, so deprecate the global variant.
The openh264 option is dropped altogether since it is just a fallback
for -max_nal_size anyway.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpeg2.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by ffv1 and ffvhuff.
It is a very codec-specific option, so deprecate the global variant.
Improve documentation a little.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, and xvid.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, xavs, and vpx.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by x264 and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by mpegvideoenc and vpx.
They are very codec-specific options, so deprecate the global variants.
Add an allowed value to the private options for frame_skip_cmp which
seems to have been forgotten, but perfectly working.
The libvpx frame dropping feature uses one of such option
(frame_skip_threshold) without the other three. For this reason rename
the option to something more consistent with the other libvpx variables.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc,
It is a very codec-specific option, so deprecate the global variant.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The b_frame_strategy option is only used by mpegvideoenc, qsv, x264, and
xavs, while b_sensitivity is only used by mpegvideoenc.
These are very codec-specific options, so deprecate the global variants.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The version structure in the main decoder context was not (and
apparently has never been) populated since it was added.
Still, having VC-2 break the existing Dirac Low Delay mode was odd and
easily avoidable had the specifications authors noticed/cared.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The parser scans for "BBCD" to appear in the bitstream which indicate a
parse info header and once that happens, checks if the parse offsets are
sane. Since random BBCD strings might appear in the bitstream the parser
will emit a pointless warning if that happens.
This commit improves parsing by checking for a valid parse code as well
as keeping the original checks for valid parse offsets. The warnings
were removed as they serve no real purpose.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The DSP lacked a function needed to convert signed to unsigned. This was
ignored when originally adding support and templating for bit depths
greater than 8. The 10 bit function was used for 12 bit pictures and
resulted in an improper conversion.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This is needed as near infinite values on the input side result in only some
output to be non finite.
Also it may still be insufficient if subsequent computations overflow
Fixes null pointer dereference
Fixes: ae66c0f6c12ac1cd5c2c237031240f57/signal_sigsegv_2618c99_9516_6007026f2185a26d7afea895fbed6e38.ogg
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Has been marked for removal for over a month and has not been improved
or touched at all since it was implemented.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Too many crashes observed. Can't be helped until the autocorrelation
function is massively checked for sanity.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
In the unlikely situation the user decides to set ticks_per_frame
and timebase to a value large enough to overflow.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'd1cd20e4e33f8139e150034b3c457302312d81bd':
qsvenc: split encoding frames and reading from the async FIFO
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a6259a6ecbad18d58085e4ab23f56151e98d7b53':
qsvenc: properly handle the warning from MFXVideoCORE_SyncOperation
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fixes out of array access
Fixes: aaa479088e6fb40b04837b3119f47b04/asan_heap-oob_e38c68_8576_9d653078b2470700e2834636f12ff557.tga
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Match the use of AV_PIX_FMT_PAL8 for 1-bit QuickTime Animation in
lavc/qtrle. To reiterate, 1-bit video is not necessary black & white in
QuickTime, merely bi-level. The two colors can be any color. The palette,
either included in the sample description, or the default Macintosh
palette (black & white for 1-bit video) will be set in lavf/qtpalette.
See the QuickTime File Format Specification for details.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 83aedfb29af669c4d6e10f1bfad974d2/asan_heap-oob_1ab42fe_4984_9f6ec14462f8d8a00ea24b320572a963.tif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It seems the previous tables where calculated with 32bit integers ignoring
overflows.
Also check for the max qindex, the value is choosen so that the qfactor/offset
fit in int32.
Fixes: 070b7914fd5dfe8f93248bea71363410/asan_static-oob_c8d034_2764_258e20f4a3c79158aecddb61a833d756.drc
Fixes out of array reads
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
TNS was computing filter coefficients incorrectly for short windows
due to a few coefficient addressing bugs. Fixing them fixes lots of
instability with transients (short windows).
I/S energy, especially when it comes to phase cancellations,
needs to use signed coefficients as input, yet it was using
abs'd coefficients. That was a slight bug.
Make sure to properly enforce maximum scalefactor delta in PNS
and I/S, not as an absolute range but relative to the previous
and first scalefactor, the latter important since PNS uses an
implicit inicial scalefactor derived from the global gain, and
encoded in a different way, which makes a big difference in the
allowed range.
Fixes out of array read
Fixes: 1b79b985cdf860ffa228c00ee5497051/signal_sigsegv_1f99d24_315_f0f1fdb451264b1138e9c24eb7d49181.wv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This decreases the MV related encoding table sizes
This should have little effect on real world video encoding performance
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
s->ac_val[0][0] is of type 'int16_t [16]', but points into a larger buffer.
Here it is used as base pointer to find the correct position in the
larger buffer by adding 's->block_index[n] * 16' and thus as 'int16_t *'.
This fixes clang's ubsan runtime error: index out of bounds for type
'int16_t [16]'
Fixes: test_case.mp4
Found-by: Tyson Smith <twsmith@mozilla.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The function is used on unaligned buffers (such as those provided
by AVPacket), accessing them as uint16_t causes SIGBUS crashes on
architectures like SPARC.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes out of array accesses
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sometimes rollup captions can move around the screen. This fixes "ghost"
captions from below the current rollup area from continuing to be
captured when a rollup moves higher up on the screen.
This new mode is useful for realtime decoding of closed captions so they
can be display along with mpeg2 frames.
Closed caption streams contain two major types of captions:
- POPON captions, which are buffered off-screen and displayed
only after EOC (end of caption, aka display buffer)
- PAINTON/ROLLUP captions, which are written to the display as soon as
they arrive.
In a typical real-time eia608 decoder, commands like EOC (end of
caption; display buffer), EDM (erase display memory) and EBM (erase
buffered memory) perform their expected functions as soon as the
commands are processed. This is implemented in the real_time branches
added in this commit.
Before this commit, and in the !real_time branches after this commit,
the decoder cleverly implements its own version of the decoder which is
specifically geared towards buffered decoding. It does so by actively
ignoring commands like EBM (erase buffered memory), and then re-using
the non-display buffer to hold the previous caption while the new one is
received. This is the opposite of the real-time decoder, which uses the
non-display buffer to hold the new caption while the display buffer is
still showing the current caption.
In addition to ignoring EBM, the buffered decoder also has custom
implementations for EDM and EOC. An EDM (erase display memory) command
flushes the existing contents before clearing the screen, and EOC
similarly always flushes the active buffer (the previous subtitle)
before flipping buffers.
This is quite an accurate approximation; testing shows ~ 2ulp error in
the floating point result. Tested with FATE.
Alternatively, if one wants "full accuracy", one can use powf, or sqrt
instead of sqrtf. With powf, one gets 1 ulp error (theoretically should be 0, as
0.75 is exactly representable) on GNU libm, with sqrt, 0 ulp error.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Abstracted into pos_pow34 utility function
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
src and dst are only 8-bit-aligned, so accessing them as uint16_t causes
SIGBUS crashes on architectures like sparc.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes out of array read
Fixes: 04442da73d935b776d2236282588d4f9/signal_sigsegv_2625a69_8790_ae85ffc889070663319b3417ede777b0.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids closing and opening the bit reader
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
All MDCT outputs must be checked in case of 128point MDCTs
Fixes: out of array read
Fixes: 04442da73d935b776d2236282588d4f9/signal_sigsegv_2625a69_351_52ca6226eb83547a2d26e322ce84ed84.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is used to check if the input buffer is larger enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
More don't fit into the integer output.
Also use get_bits_long, since get_bits only supports reading up to 25
bits, while get_bits_long supports the full integer range.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Use the ability to invert phase with ms_mask instead of changing
the codebook when possible, to avoid having to switch codebooks
if some bands are INTENSTY_BT and others are INTENSITY_BT2, since
usually a set ms_mask uses less bits that a codebook change. While
it may not always be a win (ie: if it causes an ms_mask bitmap
to be sent when it wouldn't have been otherwise), it's unlikely
since the ms_mask bitmap will almost always be there already for
M/S itself.
The relative error between two encoding strategies is the simple
difference of rate-distortion values, and not the absolute
difference. An absolute measure would allow worsening of the
quantization error as well as improving.
1. Fix sf_idx and band_type addressing to address only the first
subwindow in the group (others could hold garbage values)
2. Don't step on ms_mask when is_mask is set. I/S selection
already sets the ms_mask properly and shouldn't be overridden.
3. Use mid/sid cb/sf when computing coding error, as should be
since those are the cb/sfs that will eventually be set.
4. Fix distortion computation on multi-subwindow groups (was
subtracting the bits terms multiple times)
5. Clear ms_mask when one side uses PNS and the other doesn't.
When using PNS, ms_mask signals correlated noise, which can be
detected just like regular M/S detection, so we don't skip
noise bands, but when only one side uses PNS setting the flag
can confuse some encoders, so avoid that.
Correct addressing of sf_idx and band_type arrays in I/S code.
Both arrays don't guarantee valid values for subwindows at all
times, depending on which coder is being used, which could result
in reading of garbage values. Instead, only the first subwindow
in the window group has to be used, ie: use w*16+g instead of
(w+w2)*16+g
Change the condition for application of the M/S transform to match
that of the decoder. Namely, that no special coding books must be
in use in either channel. While the condition ought to be
equivalent to the current one when the invariant of is_mask is
kept, matching the decoder's condition is safer and easier to
maintain.
Fixes an assertion error reported in #2686 that happens when
using prediction (either explicitly or implicitly by setting
the AAC main profile), since prediction code would allow
creating new zeroes or removing existing ones, without
properly checking for SF delta violations.
This patch forbids creating/removing zeroes, perhaps an
overly conservative approach, but a safe one. More permissive
and sophisticated approaches may be attempted in the future.
since:
cbcc88c libvpx: Support setting color range for vp9.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Zern <jzern@google.com>
When there is a non-zero decoding delay due to reordering, the first dts
should be lower than the first pts (since the first packet fed to the
decoder does not produce any output).
Use the same scheme used in mpegvideo_enc (which comes from x264
originally) -- wait for first two timestamps and extrapolate linearly to
the past to produce the first dts value.
When B-frames are enabled and the encoder returns success, all currently
pending buffers immediately become valid and can be returned to the
caller. We can only return one packet at a time, so all the other
pending buffers should be transferred to a new 'ready' fifo, from where
they can be returned in subsequent calls (in which the encoder does not
produce any new output). This bug was hidden by the incorrect testing of
the encoder return value (the return value was overwritten before it was
tested).
Fixes assertion failure
Fixes out of memory access
Fixes: test_casex.ivf
Found-by: Tyson Smith <twsmith@mozilla.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The transformation to bytes must happen after alignment to get the same
resulting pointers as before.
This fixes segmentation faults in the assembler code.
The regression was introduced in commit 9553689.
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This exploits an approach based on the sieve of Eratosthenes, a popular
method for generating prime numbers.
Tables are identical to previous ones.
Tested with FATE with/without --enable-hardcoded-tables.
Sample benchmark (Haswell, GNU/Linux+gcc):
prev:
7860100 decicycles in cbrt_tableinit, 1 runs, 0 skips
7777490 decicycles in cbrt_tableinit, 2 runs, 0 skips
[...]
7582339 decicycles in cbrt_tableinit, 256 runs, 0 skips
7563556 decicycles in cbrt_tableinit, 512 runs, 0 skips
new:
2099480 decicycles in cbrt_tableinit, 1 runs, 0 skips
2044470 decicycles in cbrt_tableinit, 2 runs, 0 skips
[...]
1796544 decicycles in cbrt_tableinit, 256 runs, 0 skips
1791631 decicycles in cbrt_tableinit, 512 runs, 0 skips
Both small and large run count given as this is called once so small run
count may give a better picture, small numbers are fairly consistent,
and there is a consistent downward trend from small to large runs,
at which point it stabilizes to a new value.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes index out of bounds error
Fixes: aac_index_out_of_bounds.wmv
Found-by: Piotr Bandurski <ami_stuff@o2.pl>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Pass through color range to vp9 encoder. Parse color range in libvpxdec.c.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
unlike reap_screen(), capture_screen() can be used to populate buffer
without touching the timestamps. this is useful for upcoming commits
which implement a real time caption stream.
moves the screen_changed bit and the bprint_clear into reap_screen() so
the logic is centralized and callers do not need to touch the bit or the
buffer before calling reap_screen()
The previous check only caught sizes from -AV_INPUT_BUFFER_PADDING_SIZE
to -1.
This fixes ubsan runtime error: signed integer overflow: 2147483647 + 32
cannot be represented in type 'int'
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes out of array read
Fixes: test_case-mdc.264 (b47be15a120979f5a1a945c938cbef33)
Found-by: Tyson Smith <twsmith@mozilla.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It serves absolutely no purpose other than to confuse potentional
Android developers about how to use hardware acceleration properly
on the the platform. The stagefright "API" is not public, and the
MediaCodec API is the proper way to do this.
Furthermore, stagefright support in avcodec needs a series of
magic incantations and version-specific stuff, such that
using it actually provides downsides compared just using the actual
Android frameworks properly, in that it is a lot more work and confusion
to get it even running. It also leads to a lot of misinformation, like
these sorts of comments (in [1]) that are absolutely incorrect.
[1] http://stackoverflow.com/a/29362353/3115956
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The previous check only caught sizes from -AV_INPUT_BUFFER_PADDING_SIZE
to -1.
This fixes ubsan runtime error: signed integer overflow: 2147483647 + 32
cannot be represented in type 'int'
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Otherwise this can have some surprising effects (crashes), so let's
better not allow it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This causes non-unique elements in floor_setup->data.t1.list, which
makes the stream undecodable according to the specification.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit '3b6473b43eb69fc3faaf69f7fd0b83b51db7607f':
qsvdec: properly handle the warning from MFXVideoCORE_SyncOperation
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This commit fixes the lack of palettized display of 1-bit video
in the qtrle decoder. It is related to my commit of
lavf/qtpalette, which added 1-bit video to the "palettized video"
category. As far as I can see, everything works fine, but comments are
of course welcome.
Below are links to sample files, which should now be displayed properly
with bluish colors, but which were previously displayed in black &
white.
Matroska:
https://drive.google.com/open?id=0B3_pEBoLs0faNjI0cHBMWDhYY2c
Earth Spin 1-bit qtrle.mkv
QuickTime (mov):
https://drive.google.com/open?id=0B3_pEBoLs0faUlItWm9KaGJSTEE
Earth Spin 1-bit qtrle.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It causes the angle channel number to equal the magnitude channel
number, which makes the stream undecodable according to the
specification.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This can be used to simplify code in a couple of places.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This causes a overall slowdown of 0.1 % (tested with mpeg4 single thread encoding of matrixbench at QP=3)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '8563f9887194b07c972c3475d6b51592d77f73f7':
x86: use emms after ff_int32_to_float_fmul_scalar_sse
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f4f27e4cf1013c55b2c7df359ce8d58ee922662c':
x86: zero extend the 32-bit length in int32_to_float_fmul_scalar implicitly
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '69a68593ce5684409c3c4dd9a901bfd8b16925b1':
Remove stray line breaks from avpriv_{report_missing_feature|request_samples}
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2008f76054906e9ff6bf744800af0e5a5bfe61be':
dca: remove unused decode_hf function and quant_d tables
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'aebf07075f4244caf591a3af71e5872fe314e87b':
dca: change the core to work with integer coefficients.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'de9e199a039473ebe4b1b87382e3064d0ea2cf02':
lavc: make avpriv_mpa_decode_header private on next bump
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '955aec3c7c7be39b659197e1ec379a09f2b7c41c':
mpegaudiodecheader: check the header in avpriv_mpegaudio_decode_header
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cea1eef25c3310a68dd327eb74aae14ad3c2ddef':
lavc: get the profile name through the codec descriptor in avcodec_string()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Before 741b494fa8, when the reference list
modification description was invalid, the code would substitute the
corresponding reference from the initial ("default") reference list.
After that commit, it will just return an error.
Since there are apparently invalid samples in the wild that used to play
fine with the old code, it is a good idea to re-add some sort of error
resilience here. So, when the reference list modification results in a
missing frame, substitute a previous reference frame for it. The
relevant sample again decodes fine with the same output as previously.
This can happen if s->ls changes from 0 to 1, but picture allocation is
skipped due to s->interlaced.
In that case ff_jpegls_decode_picture could be called even though the
s->picture_ptr frame has the wrong pixel format and thus a wrong
linesize, which results in a too small zero buffer being allocated.
This fixes an out-of-bounds read in ls_decode_line.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Commit b272c3a5aa has sped up dsd_tablegen, and now table generation takes
~ 40k cycles. Thus, these tables can always be generated at runtime.
Tested with/without --enable-hardcoded-tables.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Tables are bit identical.
Sample benchmark (Haswell, GNU/Linux+gcc):
old:
814485 decicycles in dsd_ctables_tableinit, 512 runs, 0 skips
new:
356808 decicycles in dsd_ctable_tableinit, 512 runs, 0 skips
Binary size should essentially be identical, and is in fact identical on
the configuration I tested on.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Intel's Instruction Set Reference (as of September 2015) clearly states
that cvtpi2ps switches to MMX state. Actual CPUs do not switch if the
source is a memory location. The Instruction Set Reference from 1999
(Order Number 243191) describes this behaviour but all later versions
I've seen have make no distinction whether MMX registers or memory is
used as source.
The documentation for the matching SSE2 instruction to convert to double
(cvtpi2pd) was fixed (see the valgrind bug
https://bugs.kde.org/show_bug.cgi?id=210264).
It will take time to get a clarification and fixes in place. In the
meantime it makes sense to change ff_int32_to_float_fmul_scalar_sse to
be correct according to the documentation. The vast majority of users
will have SSE2 so a change to the SSE version has little effect.
Fixes fate-checkasm on x86 valgrind targets.
Valgrind 'bug' reported as https://bugs.kde.org/show_bug.cgi?id=357059
get_ue_golomb() cannot decode values larger than 8190 (the maximum
value that can be golomb encoded in 25 bits) and produces the error
"Invalid UE golomb code" if a larger value is encountered. Use
get_ue_golomb_long() instead (which supports 63 bits, up to 4294967294)
when valid h264/hevc values can exceed 8190.
This updates decoding of the following values: (maximum)
first_mb_in_slice 36863* for level 5.2
abs_diff_pic_num_minus1 131071
difference_of_pic_nums_minus1 131071
idr_pic_id 65535
recovery_frame_cnt 65535
frame_packing_arrangement_id 4294967294
frame_packing_arrangement_repetition_period 16384
display_orientation_repetition_period 16384
An alternative would be to modify get_ue_golomb() to handle encoded
values of up to 49 bits as was done for get_se_golomb() in a92816c.
In that case get_ue_golomb() could continue to be used for all of
these except frame_packing_arrangement_id.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Should fix the regression, and also speeds up table generation.
Tables tested on GNU/Linux+clang: they are identical to the ones prior
to 5495c7f. ff_exp10 caused one slight change in one entry, 50000 became
50001 due to somewhat incorrect rounding.
Untested on ICC; passes FATE on GNU/Linux+gcc.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The DCA core decoder converts integer coefficients read from the
bitstream to floats just after reading them (along with dequantization).
All the other steps of the audio reconstruction are done with floats
which makes the output for the DTS lossless extension (XLL)
actually lossy.
This patch changes the DCA core to work with integer coefficients
until QMF. At this point the integer coefficients are converted to floats.
The coefficients for the LFE channel (lfe_data) are not touched.
This is the first step for the really lossless XLL decoding.
This fixes an out-of-bounds read introduced in commit 0379603.
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix possible SF delta violation that would cause an
eventual assertion failure in some corner cases (esp
on very low bitrates) when marking bands for PNS due
to misuse of the sf_delta utilities
'erf' is far from the best name for a variable and is not very
descriptive since the actual variable points to the comparitively best
IS phase. Therefore rename it to 'best'.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Otherwise the too small buffer is directly used in the frame, causing
segmentation faults, when trying to use the frame.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This is used to check if the input buffer is large enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix related register order issue in ff_h264_idct_add_neon.
Found-by: zjh8890 <243186085@qq.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This macro unconditionally used out[-1], which causes an out of bounds
read, if out is the very beginning of the buffer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
More don't fit into the integer output.
Also use get_bits_long, since get_bits only supports reading up to 25
bits, while get_bits_long supports the full integer range.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The type of last_frame_pb_count was chosen to be an int since overflow
is impossible (the spec says the maximum bits per frame is 6144 per
channel and the encoder checks for that).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
* commit '458e53f51fc75d08df884f8e9eb3d7ded23e97b3':
mpegvideo_enc: actually add the side data with vbv_delay to the packet
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '81c95eb8eee856d98d4ac37367dbc761f2faf875':
openh264: Directly include the deprecation guards header
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'c34df422628e6b7b657faee241fe7bb2629e0f57':
sgienc: Make sure to initialize skipped header portions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
exp2 is faster.
It may be possible to optimize further; e.g the exponents seem to be
multiples of 0.25. This requires study though.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
If that is the case, the loop setting predictor_state in
sonic_decode_frame causes out of bounds reads of int_samples, which has
only frame_size number of elements.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
exp2 suffices here. Some trivial speedup is done in addition here by
reusing results.
This retains accuracy, and in particular results in identical values
with GNU libm + gcc/clang.
sample benchmark (Haswell, GNU/Linux):
proposed : 424160 decicycles in pow_table, 512 runs, 0 skips
exp2 only: 1262093 decicycles in pow_table, 512 runs, 0 skips
old : 2849085 decicycles in pow_table, 512 runs, 0 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit 'e02de9df4b218bd6e1e927b67fd4075741545688':
lavc: export Dirac parsing API used by the ogg demuxer as public
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
