This fixes retrieving a valid profile for many of the FATE conformance samples,
allowing them to be properly decoded by the HWAccel after adding a profile check.
The configure detection is bumped to X265_BUILD >= 68,
since API version 68 corresponds with the x265 1.8
release tarball. The warnings inside x265 about
12-bit being experimental were removed prior to API
version 72 a short time later. At this time of
writing, X265_BUILD is at version 80.
12-bit support in the HEVC standard was approved in
October 2014 as part of HEVC Version 2 and published
in January 2015:
http://www.itu.int/ITU-T/recommendations/rec.aspx?rec=12296http://www.itu.int/rec/T-REC-H.265-201410-Shttps://hevc.hhi.fraunhofer.de/rext
Reveiwed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The private options chromaoffset, sc_threshold, and noise_reduction
were set to 0 rather than -1, and were always initializing values
in libx264 rather than letting the library use its default.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Alpha requires addition of GBRAP12 pixel format.
From
https://msdn.microsoft.com/en-us/library/windows/desktop/dd318229%28v=vs.85%29.aspx:
"If biCompression equals BI_RGB and the bitmap uses 8 bpp or less, the
bitmap has a color table immediatelly following the BITMAPINFOHEADER
structure. The color table consists of an array of RGBQUAD values. The
size of the array is given by the biClrUsed member. If biClrUsed is
zero, the array contains the maximum number of colors for the given
bitdepth; that is, 2^biBitCount colors."
Nothing about "monochrome" here. Unfortunately, pal8 to monow conversion
seems a bit flaky, but that's another story.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The private options chromaoffset, sc_threshold, and noise_reduction
were set to 0 rather than -1, and were always initializing values
in libx264 rather than letting the library use its default.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
After the merge the default threshold was unconditionally overwritten
A similar fix was written by Vittorio Giovara, but i didnt see that before
i wrote this and it also doesnt apply cleanly
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Henrik Gramner <henrik@gramner.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This uses a new MMAL feature, which limits the number of extra frames
that can be buffered within the decoder. VIDEO_MAX_NUM_CALLBACKS can
be defined as positive or negative number. Positive numbers are
absolute, and can lead to deadlocks if the user underestimates the
number of required buffers. Negative numbers specify the number of extra
buffers, e.g. -1 means no extra buffer, (-1-N) means N extra buffers.
Set a gratuitous default of -11 (N=10). This is much lower than the
firmware default, which appears to be 96.
This is backwards compatible, but needs a symbol only present in newer
firmware headers. (It's an enum item, so it requires a check in
configure.)
* commit 'd43a165bda0eae95f4c7a168c7d13d94966c1a09':
imgconvert: Add the proper API guards to a deprecated function
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '892f037c55d86ce36f8705fbeab052189312a13e':
imgconvert: Move the shrink functions only where needed
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Libav, for some reason, merged this as a public API function. This will
aid in future merges.
A define is left for backwards compat, just in case some person
used it, since it is in a public header.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
level can be 5, but there are only four codebooks.
Fixes ubsan runtime error: index 5 out of bounds for type 'int8_t
[4][96]'
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The line alignment for 1 bpp raw AV_PIX_FMT_MONOWHITE video (currently
used for AVI) was previously 4 bytes, which generated alignment warning
messages, not only for odd-width files. The alignment is now 16 bytes.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch aligns the lines of 1 bpp depth for QuickTime, and 2, 4 and 8
bpp depths for AVI and QuickTime, on 16-byte boundaries. At the same
time, the packet row stride is properly catered for.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sample rate of 11025 takes 16 bits but previous code would pick only 8.
Fixes assertion failure.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Full range video had been broken by the introduction of the < 2U check
at the following line. The bitstream format kind of implies that the full
and limited ranges use different pix_fmts but that's incorrect since we
have the avctx->color_range flag. So adjust the pixel range index to
be mapped to the same pix_fmts as limited range index.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Further speedups possible by getting rid of exp2f...
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Faster methods possible; since exponent is always a multiple of 1/8.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Much faster generation possible; but array is small so don't want to bloat
the binary.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
May help to prevent incidents like 19e456d48c.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Allow more of the cabac functions to be overridden and avoid generating any
code for unwanted refill functions.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When refilling the low bit buffer after get_cabac count the bits with ctz
if the processor has a fast version.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Ensure that cabac init sets the bitstream pointer to an even value.
It is often faster to load from an aligned boundry
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
This option is only used by mpegvideoenc.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc.
It is a very codec-specific options, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This options is only used by huffyuv, ffvhuv, jpegls, mjpeg,
mpegvideoenc, png, utvideo.
It is a very codec-specific options, so deprecate the global variant.
Set proper limits to the maximum allowed values, and update utvideoenc
tests to use the new option name.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by alac and flac.
They are very codec-specific options, so deprecate the global variants.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc and openh264.
It is a very codec-specific option, so deprecate the global variant.
The openh264 option is dropped altogether since it is just a fallback
for -max_nal_size anyway.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpeg2.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by ffv1 and ffvhuff.
It is a very codec-specific option, so deprecate the global variant.
Improve documentation a little.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, and xvid.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, xavs, and vpx.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by x264 and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by mpegvideoenc and vpx.
They are very codec-specific options, so deprecate the global variants.
Add an allowed value to the private options for frame_skip_cmp which
seems to have been forgotten, but perfectly working.
The libvpx frame dropping feature uses one of such option
(frame_skip_threshold) without the other three. For this reason rename
the option to something more consistent with the other libvpx variables.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc,
It is a very codec-specific option, so deprecate the global variant.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The b_frame_strategy option is only used by mpegvideoenc, qsv, x264, and
xavs, while b_sensitivity is only used by mpegvideoenc.
These are very codec-specific options, so deprecate the global variants.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The version structure in the main decoder context was not (and
apparently has never been) populated since it was added.
Still, having VC-2 break the existing Dirac Low Delay mode was odd and
easily avoidable had the specifications authors noticed/cared.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The parser scans for "BBCD" to appear in the bitstream which indicate a
parse info header and once that happens, checks if the parse offsets are
sane. Since random BBCD strings might appear in the bitstream the parser
will emit a pointless warning if that happens.
This commit improves parsing by checking for a valid parse code as well
as keeping the original checks for valid parse offsets. The warnings
were removed as they serve no real purpose.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The DSP lacked a function needed to convert signed to unsigned. This was
ignored when originally adding support and templating for bit depths
greater than 8. The 10 bit function was used for 12 bit pictures and
resulted in an improper conversion.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This is needed as near infinite values on the input side result in only some
output to be non finite.
Also it may still be insufficient if subsequent computations overflow
Fixes null pointer dereference
Fixes: ae66c0f6c12ac1cd5c2c237031240f57/signal_sigsegv_2618c99_9516_6007026f2185a26d7afea895fbed6e38.ogg
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Has been marked for removal for over a month and has not been improved
or touched at all since it was implemented.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Too many crashes observed. Can't be helped until the autocorrelation
function is massively checked for sanity.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
In the unlikely situation the user decides to set ticks_per_frame
and timebase to a value large enough to overflow.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'd1cd20e4e33f8139e150034b3c457302312d81bd':
qsvenc: split encoding frames and reading from the async FIFO
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a6259a6ecbad18d58085e4ab23f56151e98d7b53':
qsvenc: properly handle the warning from MFXVideoCORE_SyncOperation
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fixes out of array access
Fixes: aaa479088e6fb40b04837b3119f47b04/asan_heap-oob_e38c68_8576_9d653078b2470700e2834636f12ff557.tga
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Match the use of AV_PIX_FMT_PAL8 for 1-bit QuickTime Animation in
lavc/qtrle. To reiterate, 1-bit video is not necessary black & white in
QuickTime, merely bi-level. The two colors can be any color. The palette,
either included in the sample description, or the default Macintosh
palette (black & white for 1-bit video) will be set in lavf/qtpalette.
See the QuickTime File Format Specification for details.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 83aedfb29af669c4d6e10f1bfad974d2/asan_heap-oob_1ab42fe_4984_9f6ec14462f8d8a00ea24b320572a963.tif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It seems the previous tables where calculated with 32bit integers ignoring
overflows.
Also check for the max qindex, the value is choosen so that the qfactor/offset
fit in int32.
Fixes: 070b7914fd5dfe8f93248bea71363410/asan_static-oob_c8d034_2764_258e20f4a3c79158aecddb61a833d756.drc
Fixes out of array reads
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
TNS was computing filter coefficients incorrectly for short windows
due to a few coefficient addressing bugs. Fixing them fixes lots of
instability with transients (short windows).
I/S energy, especially when it comes to phase cancellations,
needs to use signed coefficients as input, yet it was using
abs'd coefficients. That was a slight bug.
Make sure to properly enforce maximum scalefactor delta in PNS
and I/S, not as an absolute range but relative to the previous
and first scalefactor, the latter important since PNS uses an
implicit inicial scalefactor derived from the global gain, and
encoded in a different way, which makes a big difference in the
allowed range.
Fixes out of array read
Fixes: 1b79b985cdf860ffa228c00ee5497051/signal_sigsegv_1f99d24_315_f0f1fdb451264b1138e9c24eb7d49181.wv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This decreases the MV related encoding table sizes
This should have little effect on real world video encoding performance
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
s->ac_val[0][0] is of type 'int16_t [16]', but points into a larger buffer.
Here it is used as base pointer to find the correct position in the
larger buffer by adding 's->block_index[n] * 16' and thus as 'int16_t *'.
This fixes clang's ubsan runtime error: index out of bounds for type
'int16_t [16]'
Fixes: test_case.mp4
Found-by: Tyson Smith <twsmith@mozilla.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The function is used on unaligned buffers (such as those provided
by AVPacket), accessing them as uint16_t causes SIGBUS crashes on
architectures like SPARC.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes out of array accesses
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sometimes rollup captions can move around the screen. This fixes "ghost"
captions from below the current rollup area from continuing to be
captured when a rollup moves higher up on the screen.
This new mode is useful for realtime decoding of closed captions so they
can be display along with mpeg2 frames.
Closed caption streams contain two major types of captions:
- POPON captions, which are buffered off-screen and displayed
only after EOC (end of caption, aka display buffer)
- PAINTON/ROLLUP captions, which are written to the display as soon as
they arrive.
In a typical real-time eia608 decoder, commands like EOC (end of
caption; display buffer), EDM (erase display memory) and EBM (erase
buffered memory) perform their expected functions as soon as the
commands are processed. This is implemented in the real_time branches
added in this commit.
Before this commit, and in the !real_time branches after this commit,
the decoder cleverly implements its own version of the decoder which is
specifically geared towards buffered decoding. It does so by actively
ignoring commands like EBM (erase buffered memory), and then re-using
the non-display buffer to hold the previous caption while the new one is
received. This is the opposite of the real-time decoder, which uses the
non-display buffer to hold the new caption while the display buffer is
still showing the current caption.
In addition to ignoring EBM, the buffered decoder also has custom
implementations for EDM and EOC. An EDM (erase display memory) command
flushes the existing contents before clearing the screen, and EOC
similarly always flushes the active buffer (the previous subtitle)
before flipping buffers.
This is quite an accurate approximation; testing shows ~ 2ulp error in
the floating point result. Tested with FATE.
Alternatively, if one wants "full accuracy", one can use powf, or sqrt
instead of sqrtf. With powf, one gets 1 ulp error (theoretically should be 0, as
0.75 is exactly representable) on GNU libm, with sqrt, 0 ulp error.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Abstracted into pos_pow34 utility function
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
src and dst are only 8-bit-aligned, so accessing them as uint16_t causes
SIGBUS crashes on architectures like sparc.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes out of array read
Fixes: 04442da73d935b776d2236282588d4f9/signal_sigsegv_2625a69_8790_ae85ffc889070663319b3417ede777b0.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids closing and opening the bit reader
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
All MDCT outputs must be checked in case of 128point MDCTs
Fixes: out of array read
Fixes: 04442da73d935b776d2236282588d4f9/signal_sigsegv_2625a69_351_52ca6226eb83547a2d26e322ce84ed84.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is used to check if the input buffer is larger enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
