7.10

when it can't lookup the name (at least in some cases) and thus we need
to make an extra check to detect failures.

.cvsignore

@@ -0,0 +1,11 @@
+config.log
+Makefile
+libtool
+Makefile.in
+aclocal.m4
+configure
+config.h
+config.status
+curl-config
+autom4te.cache
+depcomp

CHANGES

@@ -4,7 +4,251 @@
                             | (__| |_| |  _ <| |___ 
                              \___|\___/|_| \_\_____|
 
-                               History of Changes
+                                  Changelog
+
+
+Version 7.10 (1 Oct 2002)
+
+Daniel (30 Sep 2002)
+- Modified the curl_version_info() proto and returned struct once again, and
+  updated the man page accordingly.
+
+- Cris Bailiff found out that the pre-releases crashed on name lookups on
+  names such as "a:" or "baz:" (on Linux versions not being ipv6-enabled) due
+  to some weird return codes from gethostbyname_r(). I'll blame the complete
+  lack of docs in that department. Cris provided a fix, which I modified only
+  slightly.
+
+Daniel (27 Sep 2002)
+- After a suggestion from Christian Kurz to Debian curl package maintainer
+  Domenico Andreoli, I made it possible to override the proxy environment
+  variables better. Now, by setting -x "" you can explicitly tell libcurl to
+  not use a proxy, no matter whan the environment variables say.
+
+Version 7.10-pre4
+
+Daniel (26 Sep 2002)
+- Extended curl_version_info() more and wrote a man page for it.
+
+Daniel (25 Sep 2002)
+- libcurl could leak memory when downloading multiple files using http ranges.
+
+- Walter J. Mack provided code and docs for the new curl_free() function that
+  shall be used to free memory that is allocated by libcurl and returned back
+  to the application, as curl_escape() and curl_unescape() do.
+
+- Yarram Sunil pointed out a flaw in the multi interface where a failed
+  connection didn't close down properly and thus a second transfer using the
+  same handle failed.
+
+- Andr<64>s Garc<72>a fixed a flaw that made (among other things) dict-fetches
+  return a random value.
+
+Daniel (24 Sep 2002)
+- Wez Furlong brought his initial patch that introduced curl_version_info().
+  We might need to tweak it somewhat before release.
+
+Daniel (20 Sep 2002)
+- Craig Markwardt fixed another Tru64 IP resolve problem.
+
+Daniel (19 Sep 2002)
+- Dolbneff A.V and Spiridonoff A.V made the file:// code work with resumes
+  in the same style other code does.
+
+- Ilguiz Latypov fixed a flaw in the client code when fetching multiple URLs
+  and -C - was used. The first file's resume position was then accidentally
+  reused on all the other files too.
+
+Daniel (18 Sep 2002)
+- The curl_easy_setopt.3 man page was greatly modified and the options have
+  now been grouped in logical groups so that it should be somewhat easier to
+  read it and find things you search for.
+
+Daniel (13 Sep 2002)
+- Kevin Roth pinpointed a scary flaw in libcurl, when the HTTP server doesn't
+  send any headers back, only raw content. Right, that is a violation of the
+  standard but still happens at times and we need to deal with it. Test case
+  306 was added to verify that we do right now.
+
+Version 7.10-pre3
+
+Daniel (11 Sep 2002)
+- Lukasz Czekierda found out that curl didn't send a correct HTTP Host: header
+  when you specified the URL with an IPv6 IP-address.
+
+Daniel (4 Sep 2002)
+- Sven Neuhaus made --silent being acknowledged even when multiple URLs
+  were used. It used to output "[1/2]: http://host/a.html.de --> a.html.d" etc
+  even when told to shut up.
+
+Daniel (3 Sep 2002)
+- Updated all source code headers to use MIT-license references only, and
+  point to the COPYING file and the http://curl.haxx.se/docs/copyright.html
+  URL. I've cut out all references to MPL that I could find.
+
+- Corected the makefiles to not always use -lz when linking
+
+Version 7.10-pre2
+
+Daniel (2 Sep 2002)
+- James Gallagher added Content-Encoding support to libcurl so now curl and
+  libcurl-using apps can request compressed contents using the 'deflate'
+  method. See the special file lib/README.encoding for details.
+
+  curl --compressed is now used to request compressed contents.
+
+  curl-config --feature will include 'libz' if this feature was around when
+  the library was built.
+
+Daniel (30 Aug 2002)
+- Applied an anonymous SOCKS5-proxy patch. Not properly working in all
+  situations though, as all getaddrinfo()-using libcurls will fail on this.
+  This is because of the somewhat naive way the current code tries to extract
+  the IP address of the proxy.
+
+- Fixed up the SSL cert fixes from the other day even more after more inputs
+  from Cris. Added three new SSL error codes to make the
+  CURLE_SSL_CONNECT_ERROR slightly less overloaded.
+
+Daniel (27 Aug 2002)
+- After lots of talk with Tom Zerucha, Nick Gimbrone and Cris Bailiff I
+  decided to talk the bold path and I now made libcurl do CA certificate
+  verification by default. Thus library users need to explicitly turn this off
+  if you want to connect to sites without proper checking. We also install a
+  CA cert bundle on 'make install' now.
+
+  The curl tool now requires the -k/--insecure option in order to allow
+  connections and operations on SSL sites that aren't properly verified with
+  -cafile or --capath.
+
+  curl-config --ca displays the built-in path to the CA cert bundle.
+
+Daniel (26 Aug 2002)
+- Andrew Francis cleaned up some code that now compiles fine without the need
+  for ugly MSVC pragmas.
+
+- Keith MacDonald found a minor bug in src/main.c that made it close stdin
+  instead of the actual file handle. It shouldn't have resulted in much
+  trouble as most operating systems close all file handles on process exit
+  anyway.
+
+Daniel (22 Aug 2002)
+- Markus Oberhumer provided some documentation for his previously provided
+  CURLOPT_NOSIGNAL fix.
+
+- Patched the lib/Makefile.am to hopefully no longer complain on undefined
+  symbols that seemed to occur on builds with shared OpenSSL libraries on
+  Solaris lately...
+
+Daniel (20 Aug 2002)
+- Fixed compiler warnings on MSCV++ compiles. We're looking for help here:
+  remove the pragmas from lib/config-win32.h and adjust the sources where
+  the warnings occur. Hiding them with pragmas like this is not the correct
+  way of dealing with compiler warnings.
+
+Daniel (13 Aug 2002)
+- Ulrich Zadow made the global include files in curl/* include themselves
+  using "curl.h" instead of <curl/curl.h> which thus allows people to more
+  freely decide how to include curl and how to setup their include paths.
+
+- Sterling Hughes added the curl_share* interface, somewhat as discussed
+  previously.
+
+- J<>rn Hartroth pointed out that poll() was used in the pre1 source code and
+  it isn't very portable, so now I check for it in the configure script and
+  work around it.
+
+Version 7.9.9-pre1
+
+Daniel (12 Aug 2002)
+- Applied my initial take on making the multi stuff more asynchronous. Connects
+  should now return back without "hanging" until it has connected for real.
+  This should also be the case for FTP-PASV connects.
+
+Daniel (9 Aug 2002)
+- Applied Markus F.X.J. Oberhumer's patch that introduces CURLOPT_NOSIGNAL,
+  which effectively prevents libcurl from doing anything that may cause
+  signals to get sent. This is basicly for multi-threaded applications that
+  now can use timeouts properly, without risking any signals to burst in and
+  ruin the party.
+  
+Daniel (5 Aug 2002)
+- Lukasz Czekierda reported that RFC2732-style literal IPv6 addresses didn't
+  work. When did that code vanish? Anyway, it's back again now and seems to
+  work!
+
+- Jonatan Lander found out that POSTing an empty string didn't work with the
+  command line tool.
+
+Daniel (3 Aug 2002)
+- J<>rn Hartroth fixed the libcurl.def file to build the windows DLL with
+  the multi interface enabled.
+
+Daniel (1 Aug 2002)
+- The ftp PORT command now uses a better default IP address, as it will
+  extract and use the local IP address used by the control connection.
+
+- Modified the #include lines in curl/multi.h to work better on more
+  platforms.
+
+Daniel (31 Jul 2002)
+- Attempted a fix for Ray DeGennaro's reported HP-UX host name resolve
+  problems.
+
+Daniel (30 Jul 2002)
+- Priya Ramakrishnan and Ryan Jones compiles curl/curl.h with a C++ compiler
+  and don't get __STDC__ defined, which required us to extend the preprocessor
+  check for the ## operator usage.
+
+- Correct the description for CURLOPT_PASSWDFUNCTION, if set to NULL the
+  internal default function will be put back.
+
+- danfuzz at milk.com found out that libcurl badly assumed a space after
+  'Set-Cookie:' so if it wasn't present, it caused the first letter of the
+  cookie name to fall off!
+
+Daniel (29 Jul 2002)
+- The password prompt asking for user password used stdout and now uses
+  stderr instead to better allow redirecting. It also leaked a fopen() file
+  handle that is now fixed.
+
+Daniel (28 Jul 2002)
+- HAVE_SETVBUF was left out from src/main.c which made -N not work. Found out
+  by M T.
+
+Daniel (26 Jun 2002)
+- Glen Nakamura solved a crash in the name resolving function for IP-only
+  addresses on Alpha Linux (at least).
+
+- T. Bharath corrected the high resolution timer introduced in 7.9.8.
+
+Daniel (22 Jun 2002)
+- Andr<64>s Garc<72>a pointed out man page errors in curl_formadd.3. I fixed.
+
+Daniel (19 Jun 2002)
+- Chris Combes pointed out a flaw in curl_escape(). I fixed. We no longer
+  tries to generate nor parse '+' in URLs. Spaces become %20, and only %-codes
+  are translated by curl_unescape().
+
+Daniel (15 Jun 2002)
+- Added --limit-rate to the curl tool. Allows the user to set a maxmimum
+  upper limit to how much bandwidth to use for transfers.
+
+- CURLOPT_BUFFERSIZE was added to libcurl. This sets a prefered size for the
+  receive buffer in libcurl. The main point of this would be that the write
+  callback gets called more often and with smaller chunks.
+
+Daniel (14 Jun 2002)
+- Yarram Sunil found out that the SocketIsDead() function performed a lot
+  faster on Windows when removing the 1 microsecond timeout.
+
+- Hanno L. Kranzhoff fixed the VC++ project files.
+
+- Tom Mattison found out that ftp transfers closed the connection a little
+  too often.
+
+- Miklos Nemeth posted a VC++ makefile fix and some INSTALL comments on how
+  to disable specific protocols when building for Windows.
 
 Version 7.9.8
 

COPYING

@@ -0,0 +1,21 @@
+COPYRIGHT AND PERMISSION NOTICE
+
+Copyright (c) 1996 - 2002, Daniel Stenberg, <daniel@haxx.se>.
+
+All rights reserved.
+
+Permission to use, copy, modify, and distribute this software for any purpose
+with or without fee is hereby granted, provided that the above copyright
+notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
+NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of a copyright holder shall not
+be used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization of the copyright holder.

LEGAL

@@ -1,4 +1,4 @@
- Copyright (C) 1998-2001, Daniel Stenberg, <daniel@haxx.se>, et al.
+ Copyright (C) 1998-2002, Daniel Stenberg, <daniel@haxx.se>, et al.
 
  Everyone is permitted to copy and distribute verbatim copies of this license
  document, but changing it is not allowed.

MITX.txt

@@ -1,27 +1,21 @@
 COPYRIGHT AND PERMISSION NOTICE
 
-Copyright (c) 1996 - 2001, Daniel Stenberg, <daniel@haxx.se>.
+Copyright (c) 1996 - 2002, Daniel Stenberg, <daniel@haxx.se>.
 
 All rights reserved.
 
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, and/or sell copies of the
-Software, and to permit persons to whom the Software is furnished to do so,
-provided that the above copyright notice(s) and this permission notice appear
-in all copies of the Software.
+Permission to use, copy, modify, and distribute this software for any purpose
+with or without fee is hereby granted, provided that the above copyright
+notice and this permission notice appear in all copies.
 
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
-NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE
-LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
-DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
-CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+OR OTHER DEALINGS IN THE SOFTWARE.
 
 Except as contained in this notice, the name of a copyright holder shall not
 be used in advertising or otherwise to promote the sale, use or other dealings
 in this Software without prior written authorization of the copyright holder.
-

Makefile.am

@@ -4,9 +4,8 @@
 
 AUTOMAKE_OPTIONS = foreign
 
-EXTRA_DIST =						\
-	CHANGES LEGAL maketgz MITX.txt MPL-1.1.txt	\
-	reconf Makefile.dist curl-config.in build_vms.com curl-mode.el
+EXTRA_DIST = CHANGES COPYING maketgz UPGRADE reconf Makefile.dist	\
+curl-config.in build_vms.com curl-mode.el
 
 bin_SCRIPTS = curl-config
 
@@ -63,7 +62,7 @@ rpm:
 pkgadd:
 	umask 022 ; \
 	make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
-	cat LEGAL MITX.txt MPL-1.1.txt > $(srcdir)/packages/Solaris/copyright ; \
+	cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
 	cd $(srcdir)/packages/Solaris && $(MAKE) package
 
 #

Makefile.dist

@@ -34,12 +34,12 @@ borland:
 	cd src & make -f Makefile.b32
 
 mingw32:
-	cd lib & make -f Makefile.m32
-	cd src & make -f Makefile.m32
+	cd lib & make -f Makefile.m32 ZLIB=1
+	cd src & make -f Makefile.m32 ZLIB=1
 
 mingw32-ssl:
-	cd lib & make -f Makefile.m32 SSL=1
-	cd src & make -f Makefile.m32 SSL=1
+	cd lib & make -f Makefile.m32 SSL=1 ZLIB=1
+	cd src & make -f Makefile.m32 SSL=1 ZLIB=1
 
 vc:
 	cd lib

UPGRADE

@@ -0,0 +1,34 @@
+Upgrading to curl/libcurl 7.10 from any previous version
+========================================================
+
+libcurl 7.10 performs peer SSL certificate verification by default. This is
+done by installing a default CA cert bundle on 'make install' (or similar),
+that CA bundle package is used by default on operations against SSL servers.
+
+Alas, if you communicate with HTTPS servers using certifcates that are signed
+by CAs present in the bundle, you will not notice any changed behavior and you
+will seeminglessly get a higher security level on your SSL connections since
+can be sure that the remote server really is the one it claims to be.
+
+If the remote server uses a self-signed certificate, or if you don't install
+curl's CA cert bundle or if it uses a certificate signed by a CA that isn't
+included in the bundle, then you need to do one of the following:
+
+ 1. Tell libcurl to *not* verify the peer. With libcurl you disable with with
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, FALSE);
+
+    With the curl command tool, you disable this with -k/--insecure.
+
+ 2. Get a CA certificate that can verify the remote server and use the proper
+    option to point out this CA cert for verification when connecting. For
+    libcurl hackers: curl_easy_setopt(curl, CURLOPT_CAPATH, capath);
+
+    With the curl command tool: --cacert [file]
+
+This upgrade procedure has been deemed The Right Thing even though it adds
+this extra trouble for some users, since it adds security to a majority of the
+SSL connections that previously weren't really secure.
+
+It turned out many people were using previous versions of curl/libcurl without
+realizing the need for the CA cert options to get truly secure SSL
+connections.

acconfig.h

@@ -85,3 +85,6 @@
 
 /* Define to disable TELNET */
 #undef CURL_DISABLE_TELNET
+
+/* Define if you have zlib present */
+#undef HAVE_LIBZ

configure.in

@@ -8,7 +8,7 @@ AC_PREREQ(2.50)
 dnl First some basic init macros
 AC_INIT
 AC_CONFIG_SRCDIR([lib/urldata.h])
-AM_CONFIG_HEADER(lib/config.h src/config.h tests/server/config.h)
+AM_CONFIG_HEADER(lib/config.h src/config.h tests/server/config.h lib/ca-bundle.h)
 
 dnl figure out the libcurl version
 VERSION=`sed -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curl.h`
@@ -256,9 +256,6 @@ fi
 dnl socket lib?
 AC_CHECK_FUNC(connect, , AC_CHECK_LIB(socket, connect))
 
-dnl ucb lib?
-AC_CHECK_FUNC(gethostname, , AC_CHECK_LIB(ucb, gethostname))
-
 dnl dl lib?
 AC_CHECK_FUNC(dlclose, , AC_CHECK_LIB(dl, dlopen))
 
@@ -525,20 +522,23 @@ dnl NOTE:  We *always* look for ZLIB headers & libraries, all this option
 dnl        does is change where we look (by adjusting LIBS and CPPFLAGS.)
 dnl
 
-dnl AC_MSG_CHECKING(where to look for ZLIB)
-dnl if test X"$OPT_ZLIB" = Xno
-dnl then
-dnl 	AC_MSG_RESULT([defaults (or given in environment)])
-dnl else
-dnl	test X"$OPT_ZLIB" = Xyes && OPT_ZLIB=/usr/local
-dnl	LIBS="$LIBS -L$OPT_ZLIB/lib"
-dnl	CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
-dnl	AC_MSG_RESULT([$OPT_ZLIB])
-dnl fi
+AC_MSG_CHECKING(where to look for ZLIB)
+if test X"$OPT_ZLIB" = Xno
+then
+	AC_MSG_RESULT([defaults (or given in environment)])
+else
+	test X"$OPT_ZLIB" = Xyes && OPT_ZLIB=/usr/local
+	LIBS="$LIBS -L$OPT_ZLIB/lib"
+	CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
+	AC_MSG_RESULT([$OPT_ZLIB])
+fi
 
-dnl z lib?
 dnl AC_CHECK_FUNC(gzread, , AC_CHECK_LIB(z, gzread))
-
+AC_CHECK_LIB(z, gzread, [AM_CONDITIONAL(CONTENT_ENCODING, true) 
+		         AC_DEFINE(HAVE_LIBZ)
+			 LIBS="$LIBS -lz"
+                         HAVE_LIBZ="1"
+                         AC_SUBST(HAVE_LIBZ)])
 
 dnl Default is to try the thread-safe versions of a few functions
 OPT_THREAD=on
@@ -604,11 +604,12 @@ AC_CHECK_HEADERS( \
         pwd.h \
         utime.h \
         sys/utime.h \
+        sys/poll.h \
         setjmp.h
 )
 
 dnl Check for libz header
-dnl AC_CHECK_HEADERS(zlib.h)
+AC_CHECK_HEADERS(zlib.h)
 
 dnl Checks for typedefs, structures, and compiler characteristics.
 AC_C_CONST
@@ -642,7 +643,6 @@ AC_CHECK_FUNCS( socket \
                 strcasecmp \
                 stricmp \
                 strcmpi \
-                gethostname \
                 gethostbyaddr \
                 gettimeofday \
                 inet_addr \
@@ -660,7 +660,8 @@ AC_CHECK_FUNCS( socket \
                 geteuid \
                 dlopen \
                 utime \
-                sigsetjmp
+                sigsetjmp \
+                poll
 )
 
 dnl sigsetjmp() might be a macro and no function so if it isn't found already
@@ -693,6 +694,32 @@ AC_PATH_PROGS( NROFF, gnroff nroff, ,
   $PATH:/usr/bin/:/usr/local/bin )
 AC_SUBST(NROFF)
 
+
+AC_MSG_CHECKING([CA cert bundle install path])
+
+AC_ARG_WITH(ca-bundle,
+AC_HELP_STRING([--with-ca-bundle=FILE], [File name to install the CA bundle as])
+AC_HELP_STRING([--without-ca-bundle], [Don't install the CA bundle]),
+   [ ca="$withval" ],
+   [
+  if test "x$prefix" != xNONE; then
+    ca="$prefix/share/curl/curl-ca-bundle.crt"
+  else
+    ca="$ac_default_prefix/share/curl/curl-ca-bundle.crt"
+  fi
+   ] )
+
+if test "x$ca" = "xno"; then
+  dnl let's not keep "no" as path name, blank it instead
+  ca=""
+else
+  AC_DEFINE_UNQUOTED(CURL_CA_BUNDLE, "$ca", [CA bundle full path name])
+fi
+
+CURL_CA_BUNDLE="$ca"
+AC_SUBST(CURL_CA_BUNDLE)
+AC_MSG_RESULT([$ca])
+
 AC_PROG_YACC
 
 dnl AC_PATH_PROG( RANLIB, ranlib, /usr/bin/ranlib, 

curl-config.in

@@ -16,6 +16,7 @@ Usage: curl-config [OPTION]
 
 Available values for OPTION include:
 
+  --ca        ca bundle install path
   --cc        compiler
   --cflags    pre-processor and compiler flags
   --feature   newline separated list of enabled features
@@ -43,6 +44,10 @@ while test $# -gt 0; do
     esac
 
     case "$1" in
+    --ca)
+	echo @CURL_CA_BUNDLE@
+	;;
+
     --cc)
 	echo @CC@
 	;;
@@ -61,6 +66,9 @@ while test $# -gt 0; do
 	if test "@IPV6_ENABLED@" = "1"; then
           echo "IPv6"
         fi
+	if test "@HAVE_LIBZ@" = "1"; then
+          echo "libz"
+        fi
 	if test "@CURL_DISABLE_HTTP@" = "1"; then
           echo "HTTP-disabled"
         fi

docs/.cvsignore

@@ -0,0 +1,3 @@
+Makefile
+Makefile.in
+*html

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: May 23, 2002 (http://curl.haxx.se/docs/faq.html)
+Updated: September 3, 2002 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _     
                               ___| | | |  _ \| |    
                              / __| | | | |_) | |    
@@ -84,7 +84,9 @@ FAQ
   cURL (or simply just 'curl') is a command line tool for getting or sending
   files using URL syntax. The name is a play on 'Client for URLs', originally
   with URL spelled in uppercase to make it obvious it deals with URLs. The
-  fact it can also be pronounced 'see URL' also helped.
+  fact it can also be pronounced 'see URL' also helped, it works as an
+  abbrivation for "Client URL Request Library" or why not the recursive
+  version: "Curl is a URL Request Library".
 
   Curl supports a range of common Internet protocols, currently including
   HTTP, HTTPS, FTP, FTPS, GOPHER, LDAP, DICT, TELNET and FILE.
@@ -154,10 +156,10 @@ FAQ
   1.5 Who makes cURL?
 
   cURL and libcurl are not made by any single individual. Sure, Daniel
-  Stenberg writes the major parts, but various people's submissions are
-  important and crucial. Anyone can post their changes and improvements and
-  have them inserted in the main sources (of course on the condition that
-  developers agree on that the fixes are good).
+  Stenberg writes the major parts, but other persons' submissions are
+  important and crucial. Anyone can contribute and post their changes and
+  improvements and have them inserted in the main sources (of course on the
+  condition that developers agree on that the fixes are good).
 
   The list of contributors in the docs/THANKS file is only a small part of all
   the people that every day provide us with bug reports, suggestions, ideas
@@ -167,8 +169,8 @@ FAQ
 
   1.6 What do you get for making cURL?
 
-  Project cURL is entirely free and open. No person gets paid in any way for
-  developing curl. We all do this voluntarily on our spare time.
+  Project cURL is entirely free and open. No person gets paid for developing
+  curl. We do this voluntarily on our spare time.
 
   We get some help from companies. Contactor Data hosts the curl web site and
   the main mailing list, Haxx owns the curl web site's domain and
@@ -178,8 +180,8 @@ FAQ
   If you want to support our project with a donation or similar, one way of
   doing that would be to buy "gift certificates" at useful online shopping
   sites, such as amazon.com or thinkgeek.com. Another way would be to sponsor
-  us through a banner-program or by simply helping us coding, documenting,
-  testing etc.
+  us through a banner-program or even better: by helping us coding,
+  documenting, testing etc.
 
   1.7 What about CURL from curl.com?
 
@@ -472,11 +474,12 @@ FAQ
 
      curl 'http://www.altavista.com/cgi-bin/query?text=yes&q=curl'
 
-  In win32, the standard DOS shell treats the %-letter specially and you may
-  need to quote the string properly when % is used in it.
+  In Windows, the standard DOS shell treats the %-letter specially and you
+  need to use TWO %-letters for each single one you want to use in the URL.
 
   Also note that if you want the literal %-letter to be part of the data you
-  pass in a POST using -d/--data you must encode it as '%25'.
+  pass in a POST using -d/--data you must encode it as '%25' (which then also
+  needs the %-letter doubled on Windows machines).
 
   4.3. How can I use {, }, [ or ] to specify multiple URLs?
 
@@ -685,12 +688,10 @@ FAQ
 
 6. License Issues
 
-  Curl and libcurl are released under a MIT/X derivate license *or* the MPL,
-  the Mozilla Public License. To get a really good answer to your license
-  conflict questions, you should study the MPL and MIT/X licenses and the
-  license you are about to use and check for clashes yourself. This section is
-  just a brief summary for the cases we get the most questions. (Parts of this
-  section was much enhanced by Bjorn Reese.)
+  Curl and libcurl are released under a MIT/X derivate license. The license is
+  very liberal and should not impose a problem for your project. This section
+  is just a brief summary for the cases we get the most questions. (Parts of
+  this section was much enhanced by Bjorn Reese.)
 
   6.1. I have a GPL program, can I use the libcurl library?
 

docs/HISTORY

@@ -0,0 +1,113 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+                          How cURL Become Like This
+
+
+In the second half of 1997, Daniel Stenberg came up with the idea to make
+currency-exchange calculations available to Internet Relay Chat (IRC)
+users. All the necessary data are published on the Web; he just needed to
+automate their retrieval.
+
+Daniel simply adopted an existing command-line open-source tool, httpget, that
+Brazilian Rafael Sagula had written. After a few minor adjustments, it did
+just what he needed.
+
+Soon, he found currencies on a GOPHER site, so support for that had to go in,
+and not before long FTP download support was added as well. The name of the
+project was changed to urlget to better fit what it actually did now, since
+the http-only days were already passed.
+
+The project slowly grew bigger. When upload capabilities were added and the
+name once again was misleading, a second name change was made and on March 20,
+1998 curl 4 was released. (The version numbering from the previous names were
+kept.)
+
+(Unrelated to this project a company called Curl Corporation filed a US
+trademark on the name "CURL" on May 18 1998. That company had then already
+registered the curl.com domain back in November of the previous year. All this
+was much later brought into the lights.)
+
+SSL support was added, powered by the SSLeay library.
+
+August 1998, added project curl to freshmeat.net.
+
+October 1998, with the curl 4.9 release and the introduction of cookie
+support, curl was no longer released under the GPL license. Now we're at 4000
+lines of code, we switched over to the MPL license to restrict the effects of
+"copyleft".
+
+November 1998, configure script and reported successful compiles on several
+major operating systems. The never-quite-understood -F option was added and
+curl could now simulate quite a lot of a browser.
+
+Curl 5 was released in December 1998 and introduced the first ever curl man
+page. People started making Linux RPM packages out of it.
+
+January 1999, DICT support added.
+
+OpenSSL took over where SSLeay was abandoned.
+
+May 1999, first Debian package.
+
+August 1999, LDAP:// and FILE:// support added. The curl web site gets 1300
+visits daily.
+
+Released curl 6.0 in September. 15000 lines of code.
+
+December 28 1999, added project to Sourceforge and started using its services
+for managing the project.
+
+Spring 2000, major internal overhaul to provide a suitable library interface.
+The first non-beta release was named 7.1 and arrived in August. This offered
+the easy interface and turned out to be the beginning of actually getting
+other software and programs to get based on and powered by libcurl. Almost
+20000 lines of code.
+
+August 2000, the curl web site gets 4000 visits daily.
+
+The PHP guys adopted libcurl already the same month, when the first ever third
+party libcurl binding showed up. CURL has been a supported module in PHP since
+the release of PHP 4.0.2. This would soon get followers. More than 16
+different bindings exist at the time of this writing.
+
+September 2000, kerberos4 support was added.
+
+In November 2000 started the work on a test suite for curl. It was later
+re-written from scratch again.
+
+January 2001, Daniel released curl 7.5.2 under a new license again: MIT (or
+MPL). The MIT license is extremely liberal and can be used combined with GPL
+in other projects. This would finally put an end to the "complaints" from
+people involved in GPLed projects that previously were prohibited from using
+libcurl while it was released under MPL only. (Due to the fact that MPL is
+deemed "GPL incompatible".)
+
+curl supports HTTP 1.1 starting with the release of 7.7, March 22 2001. This
+also introduced libcurl's ability to do persistent connections. 24000 lines of
+code.
+
+August 2001. curl is bundled in Mac OS X, 10.1. It was already becoming more
+and more of a standard utility of Linux distributions and a regular in the BSD
+ports collections. The curl web site gets 8000 visits daily. Curl Corporation
+contacted Daniel to discuss "the name issue". After Daniel's reply, they have
+never since got in touch again.
+
+September 2001, libcurl 7.9 introduces cookie jar and curl_formadd(). During
+the forthcoming 7.9.x releases, we introduced the multi interface slowly and
+without much whistles.
+
+June 2002, the curl web site gets 13000 visits daily. curl and libcurl is
+35000 lines of code. Reported successful compiles on more than 40 combinations
+of CPUs and operating systems.
+
+To estimate number of users of the curl tool or libcurl library is next to
+impossible. Around 5000 downloaded packages each week from the main site gives
+a hint, but the packages are mirrored extensively, bundled with numerous OS
+distributions and otherwise retrieved as part of other software.
+
+September 2002, with the release of curl 7.10 it is released under the MIT
+license only.

docs/INSTALL

@@ -236,6 +236,30 @@ Win32
         project properties to use the SSL include path, link with the SSL libs
         and define the USE_SSLEAY symbol.
 
+   Disabling Specific Protocols:
+
+      The configure utility, unfortunately, is not available for the Windows
+      environment, therefore, you cannot use the various disable-protocol
+      options of the configure utility on this platform.
+
+      However, you can use the following defines to disable specific
+      protocols:
+
+      HTTP_ONLY             disables all protocols except HTTP
+      CURL_DISABLE_FTP      disables FTP
+      CURL_DISABLE_LDAP     disables LDAP
+      CURL_DISABLE_TELNET   disables TELNET
+      CURL_DISABLE_DICT     disables DICT
+      CURL_DISABLE_FILE     disables FILE
+      CURL_DISABLE_GOPHER   disables GOPHER
+
+      If you want to set any of these defines you have the following
+      possibilities:
+
+      - Modify lib/setup.h
+      - Modify lib/Makefile.vc6
+      - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
+        in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.
 
 IBM OS/2
 ========

docs/KNOWN_BUGS

@@ -12,6 +12,19 @@ may have been fixed since this was written!
 
 * GOPHER transfers seem broken
 
+* configure --disable-http is not fully supported. All other protocols seem
+  to work to disable.
+
+* If a HTTP server responds to a HEAD request and includes a body (thus
+  violating the RFC2616), curl won't wait to read the response but just stop
+  reading and return back. If a second request (let's assume a GET) is then
+  immediately made to the same server again, the connection will be re-used
+  fine of course, and the second request will be sent off but when the
+  response is to get read, the previous response-body is what curl will read
+  and havoc is what happens.
+  More details on this is found in this libcurl mailing list thread:
+  http://curl.haxx.se/mail/lib-2002-08/0000.html
+
 ------------------------------------------------------------------------------
 
 Q: My program blows up when I run lots of curl_easy_perform() calls on a

docs/Makefile.am

@@ -16,7 +16,8 @@ SUBDIRS = examples libcurl
 
 EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS		\
 	     README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS	\
-	     VERSIONS KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES)
+	     VERSIONS KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) \
+	     HISTORY
 
 MAN2HTML= gnroff -man $< | man2html >$@
 

docs/THANKS

@@ -81,3 +81,4 @@ that have contributed with non-trivial parts:
  - G<>tz Babin-Ebell <babin<69>ebell@trustcenter.de>
  - Andreas Damm <andreas-sourceforge@radab.org>
  - Jacky Lam <sylam@emsoftltd.com>
+ - James Gallagher <jgallagher@gso.uri.edu>

docs/TODO

@@ -6,14 +6,16 @@
 
 TODO
 
- Things to do in project cURL. Please tell me what you think, contribute and
- send me patches that improve things! Also check the http://curl.haxx.se/dev
- web section for various development notes.
+ Things to do in project cURL. Please tell us what you think, contribute and
+ send us patches that improve things! Also check the http://curl.haxx.se/dev
+ web section for various technical development notes.
 
  LIBCURL
 
- * Consider an interface to libcurl that allows applications to easier get to
-   know what cookies that are sent back in the response headers.
+ * Introduce an interface to libcurl that allows applications to easier get to
+   know what cookies that are received. Pushing interface that calls a
+   callback on each received cookie? Querying interface that asks about
+   existing cookies? We probably need both.
 
  * Make content encoding/decoding internally be made using a filter system.
 
@@ -21,9 +23,16 @@ TODO
    less copy of data and thus a faster operation.
    [http://curl.haxx.se/dev/no_copy_callbacks.txt]
 
- * Add asynchronous name resolving. http://curl.haxx.se/dev/async-resolver.txt
-   This should be made to work on most of the supported platforms, or
-   otherwise it isn't really interesting.
+ * Run-time querying about library characterics. What protocols do this
+   running libcurl support? What is the version number of the running libcurl
+   (returning the well-defined version-#define). This could possibly be made
+   by allowing curl_easy_getinfo() work with a NULL pointer for global info,
+   but perhaps better would be to introduce a new curl_getinfo() (or similar)
+   function for global info reading.
+
+ * Add asynchronous name resolving (http://daniel.haxx.se/resolver/). This
+   should be made to work on most of the supported platforms, or otherwise it
+   isn't really interesting.
 
  * Data sharing. Tell which easy handles within a multi handle that should
    share cookies, connection cache, dns cache, ssl session cache.  Full
@@ -35,17 +44,9 @@ TODO
    implement, libcurl will merely call 'getmutex' and 'leavemutex' callbacks.
    Part of the sharing suggestion at: http://curl.haxx.se/dev/sharing.txt
 
- * No-faster-then-this transfers. Many people have limited bandwidth and they
-   want the ability to make sure their transfers never use more bandwith than
-   they think is good.
-
  * Set the SO_KEEPALIVE socket option to make libcurl notice and disconnect
    very long time idle connections.
 
- * Make sure we don't ever loop because of non-blocking sockets return
-   EWOULDBLOCK or similar. This concerns the HTTP request sending (and
-   especially regular HTTP POST), the FTP command sending etc.
-
  * Go through the code and verify that libcurl deals with big files >2GB and
    >4GB all over. Bug reports (and source reviews) indicate that it doesn't
    currently work properly.
@@ -55,10 +56,27 @@ TODO
 
  * CURLOPT_MAXFILESIZE. Prevent downloads that are larger than the specified
    size. CURLE_FILESIZE_EXCEEDED would then be returned. Gautam Mani
-   requested.
+   requested. That is, the download should even begin but be aborted
+   immediately.
+
+ * Allow the http_proxy (and other) environment variables to contain user and
+   password as well in the style: http://proxyuser:proxypasswd@proxy:port
+   Berend Reitsma suggested.
+
+ LIBCURL - multi interface
+
+ * Make sure we don't ever loop because of non-blocking sockets return
+   EWOULDBLOCK or similar. This concerns the HTTP request sending (and
+   especially regular HTTP POST), the FTP command sending etc.
+
+ * Make uploads treated better. We need a way to tell libcurl we have data to
+   write, as the current system expects us to upload data each time the socket
+   is writable and there is no way to say that we want to upload data soon
+   just not right now, without that aborting the upload.
 
  DOCUMENTATION
 
+ * More and better
 
  FTP
 
@@ -168,6 +186,12 @@ TODO
 
  CLIENT
 
+ * Add an option that prevents cURL from overwiting existing local files. When
+   used, and there already is an existing file with the target file name
+   (either -O or -o), a number should be appended (and increased if already
+   existing). So that index.html becomes first index.html.1 and then
+   index.html.2 etc. Jeff Pohlmeyer suggested.
+
  * "curl ftp://site.com/*.txt"
 
  * Several URLs can be specified to get downloaded. We should be able to use

docs/curl.1

@@ -2,7 +2,7 @@
 .\" nroff -man curl.1
 .\" Written by Daniel Stenberg
 .\"
-.TH curl 1 "7 May 2002" "Curl 7.9.7" "Curl Manual"
+.TH curl 1 "11 Sep 2002" "Curl 7.10" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -95,7 +95,7 @@ If this option is used twice, the second one will disable ASCII usage.
 must be using valid ciphers. Read up on SSL cipher list details on this URL:
 .I http://www.openssl.org/docs/apps/ciphers.html (Option added in curl 7.9)
 
-If this option is used severl times, the last one will override the others.
+If this option is used several times, the last one will override the others.
 .IP "--connect-timeout <seconds>"
 Maximum time in seconds that you allow the connection to the server to take.
 This only limits the connection phase, once curl has connected this option is
@@ -308,6 +308,14 @@ as if a new session is started. Typical browsers always discard session
 cookies when they're closed down. (Added in 7.9.7)
 
 If this option is used several times, each occurrence will toggle this on/off.
+.IP "-k/--insecure"
+(SSL) This option explicitly allows curl to perform "insecure" SSL connections
+and transfers. Starting with curl 7.10, all SSL connections will be attempted
+to be made secure by using the CA certificate bundle installed by
+default. This makes all connections considered "insecure" to fail unless
+-k/--insecure is used.
+
+If this option is used twice, the second time will again disable it.
 .IP "--krb4 <level>"
 (FTP) Enable kerberos4 authentication and use. The level must be entered and
 should be one of 'clear', 'safe', 'confidential' or 'private'. Should you use
@@ -332,6 +340,19 @@ line. So, it could look similar to this:
 url = "http://curl.haxx.se/docs/"
 
 This option can be used multiple times.
+.IP "--limit-rate <speed>"
+Specify the maximum transfer rate you want curl to use. This feature is useful
+if you have a limited pipe and you'd prefer you have your transfer not use
+your entire bandwidth.
+
+The given speed is measured in bytes/second, unless a suffix is
+appended. Appending 'k' or 'K' will count the number as kilobytes, 'm' or M'
+makes it megabytes while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and
+1G.
+
+This option was introduced in curl 7.9.9.
+
+If this option is used several times, the last one will be used.
 .IP "-l/--list-only"
 (FTP)
 When listing an FTP directory, this switch forces a name-only view.
@@ -578,10 +599,13 @@ or the
 .I -O
 options.
 .IP "-v/--verbose"
-Makes the fetching more verbose/talkative. Mostly usable for
-debugging. Lines starting with '>' means data sent by curl, '<'
-means data received by curl that is hidden in normal cases and lines
-starting with '*' means additional info provided by curl.
+Makes the fetching more verbose/talkative. Mostly usable for debugging. Lines
+starting with '>' means data sent by curl, '<' means data received by curl
+that is hidden in normal cases and lines starting with '*' means additional
+info provided by curl.
+
+Note that if you want to see HTTP headers in the output, \fI-i/--include\fP
+might be option you're looking for.
 
 If this option is used twice, the second will again disable verbose.
 .IP "-V/--version"
@@ -663,6 +687,10 @@ If this option is used several times, the last one will be used.
 Use specified HTTP proxy. If the port number is not specified, it is assumed
 at port 1080.
 
+This option overrides existing environment variables that sets proxy to
+use. If there's an environment variable setting a proxy, you can set proxy to
+"" to override it.
+
 \fBNote\fP that all operations that are performed over a HTTP proxy will
 transparantly be converted to HTTP. It means that certain protocol specific
 operations might not be available. This is not the case if you can tunnel
@@ -685,6 +713,9 @@ If a download is slower than speed-limit bytes per second during a speed-time
 period, the download gets aborted. If speed-time is used, the default
 speed-limit will be 1 unless set with -y.
 
+This option controls transfers and thus will not affect slow connects etc. If
+this is a concern for you, try the \fI--connect-timeout\fP option.
+
 If this option is used several times, the last one will be used.
 .IP "-Y/--speed-limit <speed>"
 If a download is slower than this given speed, in bytes per second, for
@@ -857,6 +888,24 @@ Malformed telnet option.
 The remote peer's SSL certificate wasn't ok
 .IP 52
 The server didn't reply anything, which here is considered an error.
+.IP 53
+SSL crypto engine not found
+.IP 54
+Cannot set SSL crypto engine as default
+.IP 55
+Failed sending network data
+.IP 56
+Failure in receiving network data
+.IP 57
+Share is in use (internal error)
+.IP 58
+Problem with the local certificate
+.IP 59
+Couldn't use specified SSL cipher
+.IP 60
+Problem with the CA cert (path? permission?)
+.IP 61
+Unrecognized transfer encoding
 .IP XX
 There will appear more error codes here in future releases. The existing ones
 are meant to never change.

docs/examples/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

docs/examples/Makefile.am

@@ -9,7 +9,7 @@ EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit2.c		\
 	     multithread.c getinmemory.c ftpupload.c httpput.c		\
 	     simplessl.c ftpgetresp.c http-post.c post-callback.c	\
 	     multi-app.c multi-double.c multi-single.c multi-post.c	\
-	     fopen.c
+	     fopen.c simplepost.c
 
 all:
 	@echo "done"

docs/examples/Makefile.example

@@ -35,7 +35,7 @@ LIBS = -lcurl -lsocket -lnsl -lssl -lcrypto -dl
 
 # Link the target with all objects and libraries
 $(TARGET) : $(OBJS)
-	$(CC) $(LDFLAGS) $(LIBS) -o $(TARGET) $(OBJS)
+	$(CC)  -o $(TARGET) $(OBJS) $(LDFLAGS) $(LIBS)
 
 # Compile the source files into object files
 ftpget.o : ftpget.c

docs/examples/README

@@ -1,7 +1,7 @@
 EXAMPLES
 
-This directory is for tiny libcurl programming examples. They are meant to
-show some simple steps on how you can build your own application to take full
+This directory is for libcurl programming examples. They are meant to show
+some simple steps on how you can build your own application to take full
 advantage of libcurl.
 
 If you end up with other small but still useful example sources, please mail
@@ -12,11 +12,14 @@ examples. Just edit the file according to your system and requirements first.
 
 Most examples should build fine using a command line like this:
 
-  $ gcc `curl-config --cflags` `curl-config --libs` -o example example.c
+  $ `curl-config --cc --cflags --libs` -o example example.c
 
-Try the php/examples/ directory for PHP programming snippets!
+Some compilers don't like having the arguments in this order but instead
+want you do reorganize them like:
 
-  *PLEASE* do not use the curl.haxx.se site as a test target for your libcurl
-  applications/experiments. Even if the examples in this directory use that
-  site as an example URL at some places, it doesn't mean that the URLs work or
-  that we expect you to actually torture our web site with your tests! Thanks.
+  $ `curl-config --cc` -o example example.c `curl-config --cflags --libs`
+
+*PLEASE* do not use the curl.haxx.se site as a test target for your libcurl
+applications/experiments. Even if the examples in this directory use that site
+as an example URL at some places, it doesn't mean that the URLs work or that
+we expect you to actually torture our web site with your tests! Thanks.

docs/examples/sepheaders.c

@@ -63,6 +63,10 @@ int main(int argc, char **argv)
   /* we want the headers to this file handle */
   curl_easy_setopt(curl_handle,   CURLOPT_WRITEHEADER ,headerfile);
 
+  /*
+   * Notice here that if you want the actual data sent anywhere else but
+   * stdout, you should consider using the CURLOPT_WRITEDATA option.  */
+
   /* get it! */
   curl_easy_perform(curl_handle);
 

docs/examples/simplepost.c

@@ -0,0 +1,36 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  char *postthis="moo mooo moo moo";
+
+  curl = curl_easy_init();
+  if(curl) {
+    curl_easy_setopt(curl, CURLOPT_URL, "http://posthere.com");
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDS, postthis);
+
+    /* if we don't provide POSTFIELDSIZE, libcurl will strlen() by
+       itself */
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, strlen(postthis));
+
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}

docs/index.html

@@ -0,0 +1,21 @@
+<HTML>
+<HEAD>
+<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
+<TITLE>Index to Curl documentation</TITLE>
+</HEAD>
+
+<BODY>
+<H1 ALIGN="CENTER">Index to Curl documentation</H1>
+
+<H2>Programs</H2>
+<a href="curl-config.html">curl-config</A>
+<br><a href="curl.html">curl</A>
+
+<h2>Tutorial</h2>
+<a href="TheArtOfHttpScripting">The Art Of Scripting HTTP Requests Using Curl</a> (plain text)
+
+<h2>libcurl</h2>
+See the <a href="libcurl/index.html">libcurl section</a>
+
+</BODY>
+</HTML>

docs/libcurl-the-guide

@@ -116,6 +116,7 @@ Global Preparation
  Repeated calls to curl_global_init() and curl_global_cleanup() should be
  avoided. They should only be called once each.
 
+
 Handle the Easy libcurl
 
  libcurl version 7 is oriented around the so called easy interface. All
@@ -215,6 +216,23 @@ Handle the Easy libcurl
  previous
 
 
+Multi-threading issues
+
+ libcurl is completely thread safe, except for two issues: signals and alarm
+ handlers. Signals are needed for a SIGPIPE handler, and the alarm() syscall
+ is used to catch timeouts (mostly during DNS lookup).
+
+ So when using multiple threads you should first ignore SIGPIPE in your main
+ thread and set the CURLOPT_NOSIGNAL option to TRUE for all handles.
+
+ Everything will work fine except that timeouts are not honored during the DNS
+ lookup - this would require some sort of asynchronous DNS lookup (which is
+ planned for a future libcurl version).
+
+ For SIGPIPE info see the UNIX Socket FAQ at
+ http://www.unixguide.net/network/socketfaq/2.22.shtml
+
+
 When It Doesn't Work
 
  There will always be times when the transfer fails for some reason. You might
@@ -735,7 +753,7 @@ Customizing Operations
  request, and you're free to pass any amount of extra headers that you think
  fit. Adding headers are this easy:
 
-    struct curl_slist *headers;
+    struct curl_slist *headers=NULL; /* init to NULL is important */
 
     headers = curl_slist_append(headers, "Hey-server-hey: how are you?");
     headers = curl_slist_append(headers, "X-silly-content: yes");

docs/libcurl/.cvsignore

@@ -0,0 +1,3 @@
+Makefile
+Makefile.in
+*html

docs/libcurl/Makefile.am

@@ -19,8 +19,10 @@ man_MANS = \
 	curl_slist_append.3 \
 	curl_slist_free_all.3 \
 	curl_version.3 \
+	curl_version_info.3 \
 	curl_escape.3 \
 	curl_unescape.3 \
+	curl_free.3 \
 	curl_strequal.3 \
 	curl_strnequal.3 \
 	curl_mprintf.3 \
@@ -52,8 +54,10 @@ HTMLPAGES = \
 	curl_slist_append.html \
 	curl_slist_free_all.html \
 	curl_version.html \
+	curl_version_info.html \
 	curl_escape.html \
 	curl_unescape.html \
+	curl_free.html \
 	curl_strequal.html \
 	curl_strnequal.html \
 	curl_mprintf.html \

docs/libcurl/curl_escape.3

@@ -1,26 +1,26 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_escape 3 "6 March 2002" "libcurl 7.9" "libcurl Manual"
-.SH NAME
-curl_escape - URL encodes the given string
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "char *curl_escape( char *" url ", int "length " );"
-.ad
-.SH DESCRIPTION
-This function will convert the given input string to an URL encoded string and
-return that as a new allocated string. All input characters that are not a-z,
-A-Z or 0-9 will be converted to their "URL escaped" version (%NN where NN is a
-two-digit hexadecimal number).
-
-If the 'length' argument is set to 0, curl_escape() will use strlen() on the
-input 'url' string to find out the size.
-
-You must free() the returned string when you're done with it.
-.SH RETURN VALUE
-A pointer to a zero terminated string or NULL if it failed.
-.SH "SEE ALSO"
-.I curl_unescape(), RFC 2396
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_escape 3 "6 March 2002" "libcurl 7.9" "libcurl Manual"
+.SH NAME
+curl_escape - URL encodes the given string
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "char *curl_escape( char *" url ", int "length " );"
+.ad
+.SH DESCRIPTION
+This function will convert the given input string to an URL encoded string and
+return that as a new allocated string. All input characters that are not a-z,
+A-Z or 0-9 will be converted to their "URL escaped" version (%NN where NN is a
+two-digit hexadecimal number).
+
+If the 'length' argument is set to 0, curl_escape() will use strlen() on the
+input 'url' string to find out the size.
+
+You must curl_free() the returned string when you're done with it.
+.SH RETURN VALUE
+A pointer to a zero terminated string or NULL if it failed.
+.SH "SEE ALSO"
+.I curl_unescape(), curl_free(), RFC 2396

docs/libcurl/curl_formadd.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_formadd 3 "21 May 2002" "libcurl 7.9.8" "libcurl Manual"
+.TH curl_formadd 3 "24 June 2002" "libcurl 7.9.8" "libcurl Manual"
 .SH NAME
 curl_formadd - add a section to a multipart/formdata HTTP POST
 .SH SYNOPSIS
@@ -29,9 +29,10 @@ name). All options that use the word COPY in their names copy the given
 contents, while the ones with PTR in their names simply points to the (static)
 data you must make sure remain until curl no longer needs it.
 
-The four options for providing values are: \fBCURLFORM_COPYCONTENTS\fP,
-\fBCURLFORM_PTRCONTENTS\fP, \fBCURLFORM_FILE\fP, or \fBCURLFORM_FILECONTENT\fP
-followed by a char or void pointer (allowed for PTRCONTENTS).
+The options for providing values are: \fBCURLFORM_COPYCONTENTS\fP,
+\fBCURLFORM_PTRCONTENTS\fP, \fBCURLFORM_FILE\fP, \fBCURLFORM_BUFFER\fP,
+or \fBCURLFORM_FILECONTENT\fP followed by a char or void pointer
+(allowed for PTRCONTENTS).
 
 \fBCURLFORM_FILECONTENT\fP does a normal post like \fBCURLFORM_COPYCONTENTS\fP
 but the actual value is read from the filename given as a string.
@@ -48,15 +49,25 @@ For \fBCURLFORM_FILE\fP the user may send multiple files in one section by
 providing multiple \fBCURLFORM_FILE\fP arguments each followed by the filename
 (and each FILE is allowed to have a CONTENTTYPE).
 
-Another possibility to send single or multiple files in one section is to use
-\fBCURLFORM_ARRAY\fP that gets a struct curl_forms array pointer as its
-value. Each structure element has a CURLformoption and a char pointer. For the
-options only \fBCURLFORM_FILE\fP, \fBCURLFORM_CONTENTTYPE\fP, and
-\fBCURLFORM_END\fP (that is used to determine the end of the array and thus
-must be the option of the last and no other element of the curl_forms array)
-are allowed. The effect of this parameter is the same as giving multiple
-\fBCURLFORM_FILE\fP options possibly with \fBCURLFORM_CONTENTTYPE\fP after or
-before each \fBCURLFORM_FILE\fP option.
+\fBCURLFORM_BUFFER\fP 
+tells libcurl that a buffer is to be used to upload data instead of using a
+file. The value of the next parameter is used as the value of the "filename"
+parameter in the content header.
+
+\fBCURLFORM_BUFFERPTR\fP
+tells libcurl that the address of the next parameter is a pointer to the buffer
+containing data to upload. The buffer containing this data must not be freed
+until after curl_easy_cleanup is called.
+
+\fBCURLFORM_BUFFERLENGTH\fP
+tells libcurl that the length of the buffer to upload is the value of the
+next parameter.
+
+Another possibility to send options to curl_formadd() is the
+\fBCURLFORM_ARRAY\fP option, that passes a struct curl_forms array pointer as
+its value. Each curl_forms structure element has a CURLformoption and a char
+pointer. The final element in the array must be a CURLFORM_END. All available
+options can be used in an array, except the CURLFORM_ARRAY option itself!
 
 Should you need to specify extra headers for the form POST section, use
 \fBCURLFORM_CONTENTHEADER\fP. This takes a curl_slist prepared in the usual way
@@ -149,6 +160,14 @@ defines.
  forms[1].value  = file2;
  forms[2].option  = CURLFORM_END;
 
+ /* Add a buffer to upload */
+ curl_formadd(&post, &last,
+              CURLFORM_COPYNAME, "name",
+              CURLFORM_BUFFER, "data",
+              CURLFORM_BUFFERPTR, record,
+              CURLFORM_BUFFERLENGTH, record_length,
+              CURLFORM_END);
+
  /* no option needed for the end marker */
  curl_formadd(&post, &last, CURLFORM_COPYNAME, "pictures",
               CURLFORM_ARRAY, forms, CURLFORM_END);

docs/libcurl/curl_free.3

@@ -0,0 +1,17 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id: 
+.\"
+.TH curl_free 3 "24 Sept 2002" "libcurl 7.10" "libcurl Manual"
+.SH NAME
+curl_free - reclaim memory that has been obtained through a libcurl call
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "void *curl_free( char *" ptr " );"
+.ad
+.SH DESCRIPTION
+curl_free reclaims memory that has been obtained through a libcurl call. 
+Use curl_free() instead of free() to avoid anomalies that can result from differences in memory management between your application and libcurl.
+.SH "SEE ALSO"
+.I curl_unescape(), curl_free()

docs/libcurl/curl_unescape.3

@@ -1,27 +1,27 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_unescape 3 "22 March 2001" "libcurl 7.7" "libcurl Manual"
-.SH NAME
-curl_unescape - URL decodes the given string
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "char *curl_unescape( char *" url ", int "length " );"
-.ad
-.SH DESCRIPTION
-This function will convert the given URL encoded input string to a "plain
-string" and return that as a new allocated string. All input characters that
-are URL encoded (%XX where XX is a two-digit hexadecimal number, or +) will be
-converted to their plain text versions (up to a ? letter, no + letters to the
-right of a ? letter will be converted).
-
-If the 'length' argument is set to 0, curl_unescape() will use strlen() on the
-input 'url' string to find out the size.
-
-You must free() the returned string when you're done with it.
-.SH RETURN VALUE
-A pointer to a zero terminated string or NULL if it failed.
-.SH "SEE ALSO"
-.I curl_escape(), RFC 2396
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_unescape 3 "22 March 2001" "libcurl 7.7" "libcurl Manual"
+.SH NAME
+curl_unescape - URL decodes the given string
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "char *curl_unescape( char *" url ", int "length " );"
+.ad
+.SH DESCRIPTION
+This function will convert the given URL encoded input string to a "plain
+string" and return that as a new allocated string. All input characters that
+are URL encoded (%XX where XX is a two-digit hexadecimal number, or +) will be
+converted to their plain text versions (up to a ? letter, no + letters to the
+right of a ? letter will be converted).
+
+If the 'length' argument is set to 0, curl_unescape() will use strlen() on the
+input 'url' string to find out the size.
+
+You must curl_free() the returned string when you're done with it.
+.SH RETURN VALUE
+A pointer to a zero terminated string or NULL if it failed.
+.SH "SEE ALSO"
+.I curl_escape(), curl_free(), RFC 2396

docs/libcurl/curl_version_info.3

@@ -0,0 +1,93 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_version_info 3 "30 Sep 2002" "libcurl 7.10" "libcurl Manual"
+.SH NAME
+curl_version_info - returns run-time libcurl version info
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "curl_version_info_data *curl_version_info( CURLversion "type ");"
+.ad
+.SH DESCRIPTION
+Returns a pointer to a filled in struct with information about various
+run-time features in libcurl. \fItype\fP should be set to the version of this
+functionality by the time you write your program. This way, libcurl will
+always return a proper struct that your program understands, while programs in
+the future might get an different struct. CURLVERSION_NOW will be the most
+recent one for the library you have installed:
+
+        data = curl_version_info(CURLVERSION_NOW);
+
+Applications should use this information to judge if things are possible to do
+or not, instead of using compile-time checks, as dynamic/DLL libraries can be
+changed independent of applications.
+
+The curl_version_info_data struct looks like this
+
+.nf
+typedef struct {
+  CURLversion age;          /* 0 - this kind of struct */
+  const char *version;      /* human readable string */
+  unsigned int version_num; /* numeric representation */
+  const char *host;         /* human readable string */
+  int features;             /* bitmask, see below */
+  char *ssl_version;        /* human readable string */
+  long ssl_version_num;     /* number */
+  char *libz_version;       /* human readable string */
+  const char *protocols[];  /* list of protocols */
+} curl_version_info_data;
+.fi
+
+\fIage\fP describes what kind of struct this is. It is always 0 now. In a
+future libcurl, if this struct changes, this age counter may be increased, and
+then the struct for number 1 will look different (except for this first struct
+field).
+
+\fIversion\fP is just an ascii string for the libcurl version.
+
+\fIversion_num\fP is a 6 digit hexadecimal number created like this: <2 digits
+major number> | <2 digits minor number> | <2 digits patch number>. Version
+7.9.8 is therefore returned as 0x070908.
+
+\fIhost\fP is an ascii string showing what host information that this libcurl
+was built for. As discovered by a configure script or set by the build
+environment.
+
+\fIfeatures\fP can have none, one or more bits set, and the currently defined
+bits are:
+.TP 5.5
+.B CURL_VERSION_IPV6
+supports IPv6
+.TP
+.B CURL_VERSION_KERBEROS4
+supports kerberos4 (when using FTP)
+.TP
+.B CURL_VERSION_SSL
+supports SSL (HTTPS/FTPS)
+.TP
+.B CURL_VERSION_LIBZ
+supports HTTP deflate using libz
+.PP
+\fIssl_version\fP is an ascii string for the OpenSSL version used. If libcurl
+has no SSL support, this is NULL.
+
+\fIssl_version_num\fP is the numerical OpenSSL version value as defined by the
+OpenSSL project. If libcurl has no SSL support, this is 0.
+
+\fIlibz_version\fP is an ascii string (there is no numerical version). If
+libcurl has no libz support, this is NULL.
+
+\fIprotocols\fP is a pointer to an array of char * pointers, containing the
+names protocols that libcurl supports (using lowercase letters). The protocol
+names are the same as would be used in URLs. The array is terminated by a NULL
+entry.
+
+
+.SH RETURN VALUE
+A pointer to a curl_version_info_data struct.
+.SH "SEE ALSO"
+\fIcurl_version(3)\fP
+.SH BUGS
+No known bugs.

docs/libcurl/index.html

@@ -1,48 +1,52 @@
-HTML>
+<HTML>
 <HEAD>
 <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
-<TITLE>Index to Curl documentation</TITLE>
+<TITLE>Index to libcurl documentation</TITLE>
 </HEAD>
 
 <BODY>
-<H1 ALIGN="CENTER">Index to Curl documentation</H1>
+<H1 ALIGN="CENTER">Index to libcurl documentation</H1>
 
 <H2>Programs</H2>
-<P><A HREF="curl-config.html">curl-config.html</A>
-<P><A HREF="curl.html">curl.html</A>
+<P><A HREF="../index.html">curl and tools</A>
 
-<H2>Library routines</H2>
-<P><A HREF="libcurl.html">libcurl.html</A>
-<P><A HREF="curl_easy_cleanup.html">curl_easy_cleanup.html</A>
-<P><A HREF="curl_easy_duphandle.html">curl_easy_duphandle.html</A>
-<P><A HREF="curl_easy_getinfo.html">curl_easy_getinfo.html</A>
-<P><A HREF="curl_easy_init.html">curl_easy_init.html</A>
-<P><A HREF="curl_easy_perform.html">curl_easy_perform.html</A>
-<P><A HREF="curl_easy_setopt.html">curl_easy_setopt.html</A>
-<P><A HREF="curl_escape.html">curl_escape.html</A>
-<P><A HREF="curl_formadd.html">curl_formadd.html</A>
-<P><A HREF="curl_formfree.html">curl_formfree.html</A>
-<P><A HREF="curl_formparse.html">curl_formparse.html</A>
-<P><A HREF="curl_getdate.html">curl_getdate.html</A>
-<P><A HREF="curl_getenv.html">curl_getenv.html</A>
-<P><A HREF="curl_global_cleanup.html">curl_global_cleanup.html</A>
-<P><A HREF="curl_global_init.html">curl_global_init.html</A>
-<P><A HREF="curl_mprintf.html">curl_mprintf.html</A>
-<P><A HREF="curl_slist_append.html">curl_slist_append.html</A>
-<P><A HREF="curl_slist_free_all.html">curl_slist_free_all.html</A>
-<P><A HREF="curl_strequal.html">curl_strequal.html</A>
-<P><A HREF="curl_strnequal.html">curl_strnequal.html</A>
-<P><A HREF="curl_unescape.html">curl_unescape.html</A>
-<P><A HREF="curl_version.html">curl_version.html</A>
-<hr>
-<p><a href="curl_multi_add_handle.html">curl_multi_add_handle.html</a>
-<p><a href="curl_multi_cleanup.html">curl_multi_cleanup.html</a>
-<p><a href="curl_multi_fdset.html">curl_multi_fdset.html</a>
-<p><a href="curl_multi_info_read.html">curl_multi_info_read.html</a>
-<p><a href="curl_multi_init.html">curl_multi_init.html</a>
-<p><a href="curl_multi_perform.html">curl_multi_perform.html</a>
-<p><a href="curl_multi_remove_handle.html">curl_multi_remove_handle.html</a>
-<p><a href="libcurl-multi.html">libcurl-multi.html</a>
+<h2>Overviews</h2>
+<A HREF="libcurl.html">libcurl</A>
+<br><a href="libcurl-multi.html">libcurl-multi</a>
+<br><a href="libcurl-errors.html">libcurl-errors</a>
+<br><a href="../libcurl-the-guide">libcurl-the-guide</a> (plain text)
+
+<H2>Library Functions (A-Z)</H2>
+<a href="curl_easy_cleanup.html">curl_easy_cleanup</A>
+<br><a href="curl_easy_duphandle.html">curl_easy_duphandle</A>
+<br><a href="curl_easy_getinfo.html">curl_easy_getinfo</A>
+<br><a href="curl_easy_init.html">curl_easy_init</A>
+<br><a href="curl_easy_perform.html">curl_easy_perform</A>
+<br><a href="curl_easy_setopt.html">curl_easy_setopt</A>
+<br><a href="curl_escape.html">curl_escape</A>
+<br><a href="curl_formadd.html">curl_formadd</A>
+<br><a href="curl_formfree.html">curl_formfree</A>
+<br><a href="curl_formparse.html">curl_formparse</A>
+<br><a href="curl_free.html">curl_free</A>
+<br><a href="curl_getdate.html">curl_getdate</A>
+<br><a href="curl_getenv.html">curl_getenv</A>
+<br><a href="curl_global_cleanup.html">curl_global_cleanup</A>
+<br><a href="curl_global_init.html">curl_global_init</A>
+<br><a href="curl_mprintf.html">curl_mprintf</A>
+<br><a href="curl_multi_add_handle.html">curl_multi_add_handle</a>
+<br><a href="curl_multi_cleanup.html">curl_multi_cleanup</a>
+<br><a href="curl_multi_fdset.html">curl_multi_fdset</a>
+<br><a href="curl_multi_info_read.html">curl_multi_info_read</a>
+<br><a href="curl_multi_init.html">curl_multi_init</a>
+<br><a href="curl_multi_perform.html">curl_multi_perform</a>
+<br><a href="curl_multi_remove_handle.html">curl_multi_remove_handle</a>
+<br><a href="curl_slist_append.html">curl_slist_append</A>
+<br><a href="curl_slist_free_all.html">curl_slist_free_all</A>
+<br><a href="curl_strequal.html">curl_strequal</A>
+<br><a href="curl_strnequal.html">curl_strnequal</A>
+<br><a href="curl_unescape.html">curl_unescape</A>
+<br><a href="curl_version.html">curl_version</A>
+<br><a href="curl_version_info.html">curl_version_info</A>
 
 </BODY>
 </HTML>

include/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

include/curl/.cvsignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

include/curl/curl.h

@@ -1,6 +1,6 @@
 #ifndef __CURL_CURL_H
 #define __CURL_CURL_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include <stdio.h>
 /* The include stuff here is mainly for time_t! */
@@ -49,7 +49,7 @@
 #define FALSE 0
 #endif
 
-#include <curl/types.h>
+#include "types.h"
 
 #ifdef  __cplusplus
 extern "C" {
@@ -174,7 +174,7 @@ typedef enum {
   CURLE_HTTP_RANGE_ERROR,        /* 33 - RANGE "command" didn't work */
   CURLE_HTTP_POST_ERROR,         /* 34 */
   CURLE_SSL_CONNECT_ERROR,       /* 35 - wrong when connecting with SSL */
-  CURLE_FTP_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
+  CURLE_BAD_DOWNLOAD_RESUME,     /* 36 - couldn't resume download */
   CURLE_FILE_COULDNT_READ_FILE,  /* 37 */
   CURLE_LDAP_CANNOT_BIND,        /* 38 */
   CURLE_LDAP_SEARCH_FAILED,      /* 39 */
@@ -192,13 +192,25 @@ typedef enum {
   CURLE_SSL_PEER_CERTIFICATE,    /* 51 - peer's certificate wasn't ok */
   CURLE_GOT_NOTHING,             /* 52 - when this is a specific error */
   CURLE_SSL_ENGINE_NOTFOUND,     /* 53 - SSL crypto engine not found */
-  CURLE_SSL_ENGINE_SETFAILED,    /* 54 - can not set SSL crypto engine as default */
+  CURLE_SSL_ENGINE_SETFAILED,    /* 54 - can not set SSL crypto engine as
+                                    default */
   CURLE_SEND_ERROR,              /* 55 - failed sending network data */
   CURLE_RECV_ERROR,              /* 56 - failure in receiving network data */
+  CURLE_SHARE_IN_USE,            /* 57 - share is in use */
+  CURLE_SSL_CERTPROBLEM,         /* 58 - problem with the local certificate */
+  CURLE_SSL_CIPHER,              /* 59 - couldn't use specified cipher */
+  CURLE_SSL_CACERT,              /* 60 - problem with the CA cert (path?) */
+  CURLE_BAD_CONTENT_ENCODING,    /* 61 - Unrecognized transfer encoding */
 
   CURL_LAST /* never use! */
 } CURLcode;
 
+typedef enum {
+  CURLPROXY_HTTP = 0,
+  CURLPROXY_SOCKS4 = 4,
+  CURLPROXY_SOCKS5 = 5
+} curl_proxytype;
+
 /* this was the error code 50 in 7.7.3 and a few earlier versions, this
    is no longer used by libcurl but is instead #defined here only to not
    make programs break */
@@ -206,6 +218,7 @@ typedef enum {
 
 /* This is just to make older programs not break: */
 #define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
+#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME
 
 #define CURL_ERROR_SIZE 256
 
@@ -221,7 +234,15 @@ typedef enum {
 #ifdef CINIT
 #undef CINIT
 #endif
-#if defined(__STDC__) || defined(_MSC_VER)
+/*
+ * Figure out if we can use the ## operator, which is supported by ISO/ANSI C
+ * and C++. Some compilers support it without setting __STDC__ or __cplusplus
+ * so we need to carefully check for them too. We don't use configure-checks
+ * for these since we want these headers to remain generic and working for all
+ * platforms.
+ */
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \
+  defined(__HP_aCC)
 #define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number
 #else
 /* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
@@ -558,13 +579,34 @@ typedef enum {
   /* The CApath directory used to validate the peer certificate
      this option is used only if SSL_VERIFYPEER is true */
   CINIT(CAPATH, OBJECTPOINT, 97),
+
+  /* Instruct libcurl to use a smaller receive buffer */
+  CINIT(BUFFERSIZE, LONG, 98),
+
+  /* Instruct libcurl to not use any signal/alarm handlers, even when using
+     timeouts. This option is useful for multi-threaded applications.
+     See libcurl-the-guide for more background information. */
+  CINIT(NOSIGNAL, LONG, 99),
   
-  CURLOPT_LASTENTRY /* the last unusued */
+  /* Provide a CURLShare for mutexing non-ts data */
+  CINIT(SHARE, OBJECTPOINT, 100),
+
+  /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
+     CURLPROXY_SOCKS4 and CURLPROXY_SOCKS5. */
+  CINIT(PROXYTYPE, LONG, 101),
+
+  /* Set the Accept-Encoding string. Use this to tell a server you would like
+     the response to be compressed. */
+  CINIT(ENCODING, OBJECTPOINT, 102),
+ 
+
+  CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
   /* two convenient "aliases" that follow the name scheme better */
 #define CURLOPT_WRITEDATA CURLOPT_FILE
 #define CURLOPT_READDATA  CURLOPT_INFILE 
+#define CURLOPT_HEADERDATA CURLOPT_WRITEHEADER
 
 
   /* These enums are for use with the CURLOPT_HTTP_VERSION option. */
@@ -647,7 +689,8 @@ int curl_formparse(char *, struct curl_httppost **,
 #undef CFINIT
 #endif
 
-#if defined(__STDC__) || defined(_MSC_VER)
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \
+  defined(__HP_aCC)
 #define CFINIT(name) CURLFORM_ ## name
 #else
 /* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
@@ -737,6 +780,9 @@ char *curl_version(void);
  * allocated string or NULL if an error occurred.  */
 char *curl_escape(const char *string, int length);
 char *curl_unescape(const char *string, int length);
+/* 20020912 WJM. Provide for a de-allocation in the same translation unit
+   that did the allocation. Added in libcurl 7.10 */
+void curl_free(void *p);
 
 /* curl_global_init() should be invoked exactly once for each application that
    uses libcurl */
@@ -747,8 +793,8 @@ CURLcode curl_global_init(long flags);
 void curl_global_cleanup(void);
 
 /* This is the version number */
-#define LIBCURL_VERSION "7.9.8"
-#define LIBCURL_VERSION_NUM 0x070908
+#define LIBCURL_VERSION "7.10"
+#define LIBCURL_VERSION_NUM 0x070a00
 
 /* linked-list structure for the CURLOPT_QUOTE option (and other) */
 struct curl_slist {
@@ -812,8 +858,8 @@ typedef enum {
 
 /* unfortunately, the easy.h and multi.h include files need options and info
   stuff before they can be included! */
-#include <curl/easy.h> /* nothing in curl is fun without the easy stuff */
-#include <curl/multi.h>
+#include "easy.h" /* nothing in curl is fun without the easy stuff */
+#include "multi.h"
 
 typedef enum {
   CURLCLOSEPOLICY_NONE, /* first, never use this */
@@ -833,6 +879,78 @@ typedef enum {
 #define CURL_GLOBAL_NOTHING 0
 #define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
 
+
+/*****************************************************************************
+ * Setup defines, protos etc for the sharing stuff.
+ */
+
+/* Different types of locks that a share can aquire */
+typedef enum {
+  CURL_LOCK_TYPE_NONE = 0,
+  CURL_LOCK_TYPE_COOKIE = 1<<0,
+  CURL_LOCK_TYPE_DNS = 1<<1,
+  CURL_LOCK_TYPE_SSL_SESSION = 2<<1,
+  CURL_LOCK_TYPE_CONNECT = 2<<2,
+  CURL_LOCK_TYPE_LAST
+} curl_lock_type;
+
+typedef void (*curl_lock_function)(CURL *, curl_lock_type, void *);
+typedef void (*curl_unlock_function)(CURL *, curl_lock_type, void *);
+
+typedef struct {
+  unsigned int specifier;
+  unsigned int locked;
+  unsigned int dirty;
+  
+  curl_lock_function lockfunc;
+  curl_unlock_function unlockfunc;
+  void *clientdata;
+} curl_share;
+
+curl_share *curl_share_init (void);
+CURLcode curl_share_setopt (curl_share *, curl_lock_type, int);
+CURLcode curl_share_set_lock_function (curl_share *, curl_lock_function);
+CURLcode curl_share_set_unlock_function (curl_share *, curl_unlock_function);
+CURLcode curl_share_set_lock_data (curl_share *, void *);
+CURLcode curl_share_destroy (curl_share *);
+
+/****************************************************************************
+ * Structures for querying information about the curl library at runtime.
+ */
+
+typedef enum {
+  CURLVERSION_FIRST,
+  CURLVERSION_LAST /* never actually use this */
+} CURLversion;
+
+/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by
+   basicly all programs ever, that want to get version information. It is
+   meant to be a built-in version number for what kind of struct the caller
+   expects. If the struct ever changes, we redfine the NOW to another enum
+   from above. */
+#define CURLVERSION_NOW CURLVERSION_FIRST
+
+typedef struct {
+  CURLversion age;          /* age of the returned struct */
+  const char *version;      /* LIBCURL_VERSION */
+  unsigned int version_num; /* LIBCURL_VERSION_NUM */
+  const char *host;         /* OS/host/cpu/machine when configured */
+  int features;             /* bitmask, see defines below */
+  char *ssl_version;        /* human readable string */
+  long ssl_version_num;     /* number */
+  const char *libz_version;       /* human readable string */
+  /* protocols is terminated by an entry with a NULL protoname */
+  const char **protocols;
+} curl_version_info_data;
+
+#define CURL_VERSION_IPV6      (1<<0)
+#define CURL_VERSION_KERBEROS4 (1<<1)
+#define CURL_VERSION_SSL       (1<<2)
+#define CURL_VERSION_LIBZ      (1<<3)
+
+/* returns a pointer to a static copy of the version info struct */
+curl_version_info_data *curl_version_info(CURLversion);
+
 #ifdef  __cplusplus
 }
 #endif

include/curl/easy.h

@@ -1,6 +1,6 @@
 #ifndef __CURL_EASY_H
 #define __CURL_EASY_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #ifdef  __cplusplus
 extern "C" {
 #endif

include/curl/multi.h

@@ -1,6 +1,6 @@
 #ifndef __CURL_MULTI_H
 #define __CURL_MULTI_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 /*
   This is meant to be the "external" header file. Don't give away any
   internals here!
@@ -47,14 +47,15 @@
   Example sources using this interface is here: ../multi/
 
 */
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
+
 #if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__)
 #include <winsock.h>
+#else
+#include <sys/socket.h>
+#include <sys/time.h>
 #endif
 
-#include <curl/curl.h>
+#include "curl.h"
 
 typedef void CURLM;
 

include/curl/stdcheaders.h

@@ -1,6 +1,6 @@
 #ifndef __STDC_HEADERS_H
 #define __STDC_HEADERS_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>

include/curl/types.h

@@ -1,6 +1,6 @@
 #ifndef __CURL_TYPES_H
 #define __CURL_TYPES_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 typedef void CURL;
 typedef void CURLconnect;
 

lib/.cvsignore

@@ -1,6 +1,8 @@
 *.la
 *.lo
 Makefile
-Makefile.in
+*.in
 .deps
 .libs
+config.h
+stamp-h1

lib/Makefile.am

@@ -7,7 +7,7 @@ AUTOMAKE_OPTIONS = foreign nostdinc
 EXTRA_DIST = getdate.y Makefile.b32 Makefile.b32.resp Makefile.m32	    \
        Makefile.vc6 Makefile.riscos libcurl.def dllinit.c curllib.dsp	    \
        curllib.dsw config-vms.h config-win32.h config-riscos.h config-mac.h \
-       config.h.in
+       config.h.in ca-bundle.crt README.encoding
 
 lib_LTLIBRARIES = libcurl.la
 
@@ -16,7 +16,7 @@ lib_LTLIBRARIES = libcurl.la
 # we use srcdir/lib for the lib-private header files
 INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/lib -I$(top_srcdir)/lib
 
-libcurl_la_LDFLAGS = -no-undefined -version-info 2:2:0
+libcurl_la_LDFLAGS = -version-info 2:2:0
 # This flag accepts an argument of the form current[:revision[:age]]. So,
 # passing -version-info 3:12:1 sets current to 3, revision to 12, and age to
 # 1.
@@ -45,23 +45,17 @@ libcurl_la_LDFLAGS = -no-undefined -version-info 2:2:0
 # set age to 0.
 #
 
-libcurl_la_SOURCES = \
-arpa_telnet.h  file.c         getpass.h      netrc.h        timeval.c \
-base64.c       file.h         hostip.c       progress.c     timeval.h \
-base64.h       formdata.c     hostip.h       progress.h     \
-cookie.c       formdata.h     http.c         sendf.c        \
-cookie.h       ftp.c          http.h         sendf.h        url.c \
-dict.c         ftp.h          if2ip.c        speedcheck.c   url.h \
-dict.h         getdate.c      if2ip.h        speedcheck.h   urldata.h \
-getdate.h      ldap.c         ssluse.c       version.c \
-getenv.c       ldap.h         ssluse.h       \
-escape.c       mprintf.c      telnet.c       \
-escape.h       getpass.c      netrc.c        telnet.h       \
-getinfo.c getinfo.h transfer.c strequal.c strequal.h easy.c \
-security.h security.c krb4.c krb4.h memdebug.c memdebug.h inet_ntoa_r.h \
-http_chunks.c http_chunks.h strtok.c strtok.h connect.c connect.h \
-llist.c llist.h hash.c hash.h multi.c
-
+libcurl_la_SOURCES = arpa_telnet.h file.c getpass.h netrc.h timeval.c	\
+base64.c file.h hostip.c progress.c timeval.h base64.h formdata.c	\
+hostip.h progress.h cookie.c formdata.h http.c sendf.c cookie.h ftp.c	\
+http.h sendf.h url.c dict.c ftp.h if2ip.c speedcheck.c url.h dict.h	\
+getdate.c if2ip.h speedcheck.h urldata.h getdate.h ldap.c ssluse.c	\
+version.c getenv.c ldap.h ssluse.h escape.c mprintf.c telnet.c escape.h	\
+getpass.c netrc.c telnet.h getinfo.c getinfo.h transfer.c strequal.c	\
+strequal.h easy.c security.h security.c krb4.c krb4.h memdebug.c	\
+memdebug.h inet_ntoa_r.h http_chunks.c http_chunks.h strtok.c strtok.h	\
+connect.c connect.h llist.c llist.h hash.c hash.h multi.c		\
+content_encoding.c content_encoding.h
 
 noinst_HEADERS = setup.h transfer.h
 
@@ -70,3 +64,14 @@ $(srcdir)/getdate.c: getdate.y
 	cd $(srcdir) && \
 	  $(YACC) $(YFLAGS) getdate.y; \
 	  mv -f y.tab.c getdate.c
+
+install-data-hook:
+	@if test -n "@CURL_CA_BUNDLE@"; then \
+	  $(mkinstalldirs) `dirname $(DESTDIR)@CURL_CA_BUNDLE@`; \
+	  @INSTALL_DATA@ ca-bundle.crt $(DESTDIR)@CURL_CA_BUNDLE@; \
+        fi
+
+# this hook is mainly for non-unix systems to build even if configure
+# isn't run
+dist-hook:
+	cp $(srcdir)/ca-bundle.h.in $(distdir)/ca-bundle.h

lib/Makefile.m32

@@ -1,84 +1,92 @@
-#############################################################
-#
-## Makefile for building libcurl.a with MingW32 (GCC-2.95) and
-## optionally OpenSSL (0.9.6)
-## Use: make -f Makefile.m32
-##
-## Comments to: Troy Engel <tengel@sonic.net> or
-##              Joern Hartroth <hartroth@acm.org>
-
-CC = gcc
-AR = ar
-RANLIB = ranlib
-STRIP = strip -g
-OPENSSL_PATH = ../../openssl-0.9.6b
-
-########################################################
-## Nothing more to do below this line!
-
-INCLUDES = -I. -I.. -I../include -I../src
-CFLAGS = -g -O2 -DMINGW32
-ifdef SSL
-  INCLUDES += -I"$(OPENSSL_PATH)/outinc" -I"$(OPENSSL_PATH)/outinc/openssl"
-  CFLAGS += -DUSE_SSLEAY
-  DLL_LIBS = -leay32 -lssl32 -lRSAglue
-endif
-COMPILE = $(CC) $(INCLUDES) $(CFLAGS)
-
-libcurl_a_LIBRARIES = libcurl.a
-
-libcurl_a_SOURCES = arpa_telnet.h file.c getpass.h netrc.h timeval.c base64.c \
-	file.h hostip.c progress.c timeval.h base64.h formdata.c hostip.h progress.h	\
-	cookie.c formdata.h http.c sendf.c cookie.h ftp.c http.h sendf.h url.c dict.c	\
-	ftp.h if2ip.c speedcheck.c url.h dict.h getdate.c if2ip.h speedcheck.h		\
-	urldata.h transfer.c getdate.h ldap.c ssluse.c version.c transfer.h getenv.c	\
-	ldap.h ssluse.h escape.c getenv.h mprintf.c telnet.c escape.h getpass.c netrc.c	\
-	telnet.h getinfo.c strequal.c strequal.h easy.c security.h		\
-	security.c krb4.h krb4.c memdebug.h memdebug.c inet_ntoa_r.h http_chunks.h http_chunks.c \
-	strtok.c connect.c hash.c llist.c
-
-libcurl_a_OBJECTS =  file.o timeval.o base64.o hostip.o progress.o \
-	formdata.o cookie.o http.o sendf.o ftp.o url.o dict.o if2ip.o \
-	speedcheck.o getdate.o transfer.o ldap.o ssluse.o version.o \
-	getenv.o escape.o mprintf.o telnet.o getpass.o netrc.o getinfo.o \
-	strequal.o easy.o security.o krb4.o memdebug.o http_chunks.o \
-	strtok.o connect.o hash.o llist.o
-
-LIBRARIES =  $(libcurl_a_LIBRARIES)
-SOURCES = $(libcurl_a_SOURCES)
-OBJECTS = $(libcurl_a_OBJECTS)
-
-
-all: libcurl.a libcurl.dll libcurldll.a
-
-libcurl.a: $(libcurl_a_OBJECTS) $(libcurl_a_DEPENDENCIES)
-	-@erase libcurl.a
-	$(AR) cru libcurl.a $(libcurl_a_OBJECTS)
-	$(RANLIB) libcurl.a
-	$(STRIP) $@
-
-# remove the last line above to keep debug info
-
-libcurl.dll libcurldll.a: libcurl.a libcurl.def dllinit.o
-	-@erase $@
-	dllwrap --dllname $@ --output-lib libcurldll.a --export-all --def libcurl.def $(libcurl_a_LIBRARIES) dllinit.o -L$(OPENSSL_PATH)/out $(DLL_LIBS) -lwsock32 -lws2_32 -lwinmm
-	$(STRIP) $@
-
-# remove the last line above to keep debug info
-
-.c.o:
-	$(COMPILE) -c $<
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-clean:
-	-@erase $(libcurl_a_OBJECTS)
-
-distrib: clean
-
-	-@erase $(libcurl_a_LIBRARIES)
-
+#############################################################
+#
+## Makefile for building libcurl.a with MingW32 (GCC-2.95) and
+## optionally OpenSSL (0.9.6)
+## Use: make -f Makefile.m32
+##
+## Comments to: Troy Engel <tengel@sonic.net> or
+##              Joern Hartroth <hartroth@acm.org>
+
+CC = gcc
+AR = ar
+RANLIB = ranlib
+STRIP = strip -g
+OPENSSL_PATH = ../../openssl-0.9.6d
+ZLIB_PATH = ../../zlib-1.1.3
+
+########################################################
+## Nothing more to do below this line!
+
+INCLUDES = -I. -I.. -I../include -I../src
+CFLAGS = -g -O2 -DMINGW32
+ifdef SSL
+  INCLUDES += -I"$(OPENSSL_PATH)/outinc" -I"$(OPENSSL_PATH)/outinc/openssl"
+  CFLAGS += -DUSE_SSLEAY
+  DLL_LIBS = -L$(OPENSSL_PATH)/out -leay32 -lssl32 -lRSAglue
+endif
+ifdef ZLIB
+	INCLUDES += -I"$(ZLIB_PATH)"
+	CFLAGS += -DHAVE_ZLIB
+	DLL_LIBS += -L$(ZLIB_PATH) -lz
+endif
+COMPILE = $(CC) $(INCLUDES) $(CFLAGS)
+
+libcurl_a_LIBRARIES = libcurl.a
+
+libcurl_a_SOURCES = arpa_telnet.h file.c getpass.h netrc.h timeval.c base64.c \
+	file.h hostip.c progress.c timeval.h base64.h formdata.c hostip.h progress.h	\
+	cookie.c formdata.h http.c sendf.c cookie.h ftp.c http.h sendf.h url.c dict.c	\
+	ftp.h if2ip.c speedcheck.c url.h dict.h getdate.c if2ip.h speedcheck.h		\
+	urldata.h transfer.c getdate.h ldap.c ssluse.c version.c transfer.h getenv.c	\
+	ldap.h ssluse.h escape.c getenv.h mprintf.c telnet.c escape.h getpass.c netrc.c	\
+	telnet.h getinfo.c strequal.c strequal.h easy.c security.h		\
+	security.c krb4.h krb4.c memdebug.h memdebug.c inet_ntoa_r.h http_chunks.h http_chunks.c \
+	strtok.c connect.c hash.c llist.c multi.c \
+	content_encoding.h content_encoding.c
+
+libcurl_a_OBJECTS =  file.o timeval.o base64.o hostip.o progress.o \
+	formdata.o cookie.o http.o sendf.o ftp.o url.o dict.o if2ip.o \
+	speedcheck.o getdate.o transfer.o ldap.o ssluse.o version.o \
+	getenv.o escape.o mprintf.o telnet.o getpass.o netrc.o getinfo.o \
+	strequal.o easy.o security.o krb4.o memdebug.o http_chunks.o \
+	strtok.o connect.o hash.o llist.o multi.o \
+	content_encoding.o
+
+LIBRARIES =  $(libcurl_a_LIBRARIES)
+SOURCES = $(libcurl_a_SOURCES)
+OBJECTS = $(libcurl_a_OBJECTS)
+
+
+all: libcurl.a libcurl.dll libcurldll.a
+
+libcurl.a: $(libcurl_a_OBJECTS) $(libcurl_a_DEPENDENCIES)
+	-@erase libcurl.a
+	$(AR) cru libcurl.a $(libcurl_a_OBJECTS)
+	$(RANLIB) libcurl.a
+	$(STRIP) $@
+
+# remove the last line above to keep debug info
+
+libcurl.dll libcurldll.a: libcurl.a libcurl.def dllinit.o
+	-@erase $@
+	dllwrap --dllname $@ --output-lib libcurldll.a --export-all --def libcurl.def $(libcurl_a_LIBRARIES) dllinit.o $(DLL_LIBS) -lwsock32 -lws2_32 -lwinmm
+	$(STRIP) $@
+
+# remove the last line above to keep debug info
+
+.c.o:
+	$(COMPILE) -c $<
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+clean:
+	-@erase $(libcurl_a_OBJECTS)
+
+distrib: clean
+
+	-@erase $(libcurl_a_LIBRARIES)
+

lib/Makefile.vc6

@@ -47,7 +47,7 @@ CFLAGS = /I "../include" /nologo /W3 /GX /D "WIN32" /D "VC6" /D "_MBCS" /D "_LIB
 LNKDLL    = link.exe /DLL  /def:libcurl.def
 LNKLIB    = link.exe -lib
 LFLAGS    = /nologo
-LINKLIBS  = ws2_32.lib
+LINKLIBS  = ws2_32.lib winmm.lib
 SSLLIBS   = libeay32.lib ssleay32.lib RSAglue.lib
 CFGSET    = FALSE
 

lib/README.encoding

@@ -0,0 +1,53 @@
+
+		    Content Encoding Support for libcurl
+
+* About content encodings: 
+
+HTTP/1.1 [RFC 2616] specifies that a client may request that a server encode
+its response. This is usually used to compress a response using one of a set
+of commonly available compression techniques. These schemes are `deflate'
+(the zlib algorithm), `gzip' and `compress' [sec 3.5, RFC 2616]. A client
+requests that the sever perform an encoding by including an Accept-Encoding
+header in the request document. The value of the header should be one of the
+recognized tokens `deflate', ... (there's a way to register new
+schemes/tokens, see sec 3.5 of the spec). A server MAY honor the client's
+encoding request. When a response is encoded, the server includes a
+Content-Encoding header in the response. The value of the Content-Encoding
+header indicates which scheme was used to encode the data.
+
+A client may tell a server that it can understand several different encoding
+schemes. In this case the server may choose any one of those and use it to
+encode the response (indicating which one using the Content-Encoding header).
+It's also possible for a client to attach priorities to different schemes so
+that the server knows which it prefers. See sec 14.3 of RFC 2616 for more
+information on the Accept-Encoding header.
+
+* Current support for content encoding:
+
+I added support for the 'deflate' content encoding to both libcurl and curl.
+Both regular and chunked transfers should work although I've tested only the
+former. The library zlib is required for this feature. Places where I
+modified the source code are commented and typically include my initials and
+the date (e.g., 08/29/02 jhrg).
+
+* The libcurl interface:
+
+To cause libcurl to request a content encoding use: 
+
+    curl_easy_setopt(curl, CURLOPT_ENCODING, <string>) 
+
+where <string> is the intended value of the Accept-Encoding header.
+
+Currently, libcurl only understands how to process responses that use the
+`deflate' Content-Encoding, so the only value for CURLOPT_ENCODING that will
+work (besides "identity," which does nothing) is "deflate." If a response is
+encoded using either the `gzip' or `compress' methods, libcurl will return an
+error indicating that the response could not be decoded. If <string> is null
+or empty no Accept-Encoding header is generated.
+
+* The curl interface:
+
+Use the --compressed option with curl to cause it to ask servers to compress
+responses using deflate. 
+
+James Gallagher <jgallagher@gso.uri.edu>

lib/arpa_telnet.h

@@ -1,6 +1,6 @@
 #ifndef __ARPA_TELNET_H
 #define __ARPA_TELNET_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #ifndef CURL_DISABLE_TELNET
 /*
  * Telnet option defines. Add more here if in need.

lib/base64.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 /* Base64 encoding/decoding
  *

lib/base64.h

@@ -1,6 +1,6 @@
 #ifndef __BASE64_H
 #define __BASE64_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 int Curl_base64_encode(const void *data, int size, char **str);
 int Curl_base64_decode(const char *str, void *data);
 #endif

lib/ca-bundle.h.in

@@ -0,0 +1,31 @@
+#ifndef __CA_BUNDLE_H
+#define __CA_BUNDLE_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * In order to be useful for every potential user, curl and libcurl are
+ * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the MPL or the MIT/X-derivate
+ * licenses. You may pick one of these licenses.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ *****************************************************************************/
+
+#ifndef CURL_CA_BUNDLE
+/* Set this to the full path file name of the ca cert bundle */
+#undef CURL_CA_BUNDLE
+#endif
+
+#endif /* __CA_BUNDLE_H */

lib/config-win32.h

@@ -170,6 +170,9 @@
 /* Define if you have the <winsock.h> header file.  */
 #define HAVE_WINSOCK_H 1
 
+/* Define if you have the <stdlib.h> header file.  */
+#define HAVE_STDLIB_H 1
+
 /* Define if you have the closesocket function.  */
 #define HAVE_CLOSESOCKET 1
 
@@ -199,7 +202,7 @@
  *This is to eliminate the warnings when compiled *
  * using MS VC++ compiler	  			  *
  **************************************************/
-#ifdef _MSC_VER
+#if 0
 
 #pragma warning (disable: 4244)	/* truncation from 'const int' to 'char' */
 #pragma warning (disable: 4127)	/* conditional expression is constant */
@@ -218,4 +221,7 @@
                                    been initialized */
 #pragma warning (disable: 4715)	/* ToHour' : not all control paths return a
                                    value */
+#pragma warning (disable: 4115) /* warning C4115: '_RPC_ASYNC_STATE' : named
+                                   type definition in parentheses */
+#pragma warning (disable: 4206) /* this does what? */
 #endif

lib/connect.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 
@@ -337,6 +337,70 @@ int socketerror(int sockfd)
   return err;
 }
 
+/*
+ * Curl_is_connected() is used from the multi interface to check if the
+ * firstsocket has connected.
+ */
+
+CURLcode Curl_is_connected(struct connectdata *conn,
+                           int sockfd,
+                           bool *connected)
+{
+  int rc;
+  struct SessionHandle *data = conn->data;
+
+  *connected = FALSE; /* a very negative world view is best */
+
+  if(data->set.timeout || data->set.connecttimeout) {
+    /* there is a timeout set */
+
+    /* Evaluate in milliseconds how much time that has passed */
+    long has_passed = Curl_tvdiff(Curl_tvnow(), data->progress.start);
+
+    /* subtract the most strict timeout of the ones */
+    if(data->set.timeout && data->set.connecttimeout) {
+      if (data->set.timeout < data->set.connecttimeout)
+        has_passed -= data->set.timeout*1000;
+      else 
+        has_passed -= data->set.connecttimeout*1000;
+    }
+    else if(data->set.timeout)
+      has_passed -= data->set.timeout*1000;
+    else
+      has_passed -= data->set.connecttimeout*1000;
+
+    if(has_passed > 0 ) {
+      /* time-out, bail out, go home */
+      failf(data, "Connection time-out");
+      return CURLE_OPERATION_TIMEOUTED;
+    }
+  }
+
+  /* check for connect without timeout as we want to return immediately */
+  rc = waitconnect(sockfd, 0);
+
+  if(0 == rc) {
+    int err = socketerror(sockfd);
+    if ((0 == err) || (EISCONN == err)) {
+      /* we are connected, awesome! */
+      *connected = TRUE;
+      return CURLE_OK;
+    }
+    /* nope, not connected for real */
+  }
+
+  /*
+   * If the connection phase is "done" here, we should attempt to connect
+   * to the "next address" in the Curl_hostaddr structure that we resolved
+   * before. But we don't have that struct around anymore and we can't just
+   * keep a pointer since the cache might in fact have gotten pruned by the
+   * time we want to read this... Alas, we don't do this yet.
+   */
+
+  return CURLE_OK;
+}
+
+
 /*
  * TCP connect to the given host with timeout, proxy or remote doesn't matter.
  * There might be more than one IP address to try out. Fill in the passed
@@ -347,7 +411,8 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
                           Curl_addrinfo *remotehost, /* use one in here */
                           int port,                  /* connect to this */
                           int *sockconn,             /* the connected socket */
-                          Curl_ipconnect **addr)     /* the one we used */
+                          Curl_ipconnect **addr,     /* the one we used */
+                          bool *connected)           /* really connected? */
 {
   struct SessionHandle *data = conn->data;
   int rc;
@@ -362,6 +427,9 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
    * Figure out what maximum time we have left
    *************************************************************/
   long timeout_ms=300000; /* milliseconds, default to five minutes */
+
+  *connected = FALSE; /* default to not connected */
+
   if(data->set.timeout || data->set.connecttimeout) {
     double has_passed;
 
@@ -395,7 +463,11 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
   }
 
   hostname = data->change.proxy?conn->proxyhost:conn->hostname;
-  infof(data, "About to connect() to %s:%d\n", hostname, port);
+  infof(data, "About to connect() to %s%s%s:%d\n",
+        conn->bits.ipv6_ip?"[":"",
+        hostname,
+        conn->bits.ipv6_ip?"]":"",
+        port);
 
 #ifdef ENABLE_IPV6
   /*
@@ -437,8 +509,11 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
         case EAGAIN:
 #endif
         case EINTR:
-
           /* asynchronous connect, wait for connect or timeout */
+          if(data->state.used_interface == Curl_if_multi)
+            /* don't hang when doing multi */
+            timeout_ms = 0;
+
           rc = waitconnect(sockfd, timeout_ms);
           break;
         case ECONNREFUSED: /* no one listening */
@@ -448,6 +523,7 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
           break;
         }
       }
+
       if(0 == rc) {
         /* we might be connected, if the socket says it is OK! Ask it! */
         int err;
@@ -455,11 +531,17 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
         err = socketerror(sockfd);
         if ((0 == err) || (EISCONN == err)) {
           /* we are connected, awesome! */
+          *connected = TRUE; /* this is truly a connect */
           break;
 	}
         failf(data, "socket error: %d", err);
         /* we are _not_ connected, it was a false alert, continue please */
       }
+      else if(data->state.used_interface == Curl_if_multi) {
+        /* When running the multi interface, we bail out here */
+        rc = 0;
+        break;
+      }
 
       /* connect failed or timed out */
       sclose(sockfd);
@@ -524,7 +606,7 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
            (struct in_addr *)remotehost->h_addr_list[aliasindex],
            sizeof(struct in_addr));
     serv_addr.sin_family = remotehost->h_addrtype;
-    serv_addr.sin_port = htons(port);
+    serv_addr.sin_port = htons((unsigned short)port);
   
     rc = connect(sockfd, (struct sockaddr *)&serv_addr,
                  sizeof(serv_addr));
@@ -542,8 +624,11 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
          */
       case EAGAIN:
 #endif
-
         /* asynchronous connect, wait for connect or timeout */
+        if(data->state.used_interface == Curl_if_multi)
+          /* don't hang when doing multi */
+          timeout_ms = 0;
+
         rc = waitconnect(sockfd, timeout_ms);
         break;
       default:
@@ -558,6 +643,7 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
       int err = socketerror(sockfd);
       if ((0 == err) || (EISCONN == err)) {
         /* we are connected, awesome! */
+        *connected = TRUE; /* this is a true connect */
         break;
       }
       /* nope, not connected for real */
@@ -565,6 +651,12 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
     }
 
     if(0 != rc) {
+      if(data->state.used_interface == Curl_if_multi) {
+        /* When running the multi interface, we bail out here */
+        rc = 0;
+        break;
+      }
+
       /* get a new timeout for next attempt */
       after = Curl_tvnow();
       timeout_ms -= Curl_tvdiff(after, before);

lib/connect.h

@@ -1,6 +1,6 @@
 #ifndef __CONNECT_H
 #define __CONNECT_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,27 +9,32 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 int Curl_nonblock(int socket,    /* operate on this */
                   int nonblock   /* TRUE or FALSE */);
 
+CURLcode Curl_is_connected(struct connectdata *conn,
+                           int sockfd,
+                           bool *connected);
+
 CURLcode Curl_connecthost(struct connectdata *conn,
                           Curl_addrinfo *host, /* connect to this */
                           int port,       /* connect to this port number */
                           int *sockconn,  /* not set if error is returned */
-                          Curl_ipconnect **addr /* the one we used */
-                          ); /*  index we used */
+                          Curl_ipconnect **addr, /* the one we used */
+                          bool *connected /* truly connected? */
+                          );
 #endif

lib/content_encoding.c

@@ -0,0 +1,122 @@
+/***************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ ***************************************************************************/
+
+#include "setup.h"
+
+#ifdef HAVE_LIBZ
+
+#include "urldata.h"
+#include <curl/curl.h>
+#include <curl/types.h>
+#include "sendf.h"
+
+#define DSIZ 4096               /* buffer size for decompressed data */
+
+
+static CURLcode
+process_zlib_error(struct SessionHandle *data, z_stream *z)
+{
+  if (z->msg)
+    failf (data, "Error while processing content unencoding.\n%s",
+           z->msg);
+  else
+    failf (data, "Error while processing content unencoding.\n"
+           "Unknown failure within decompression software.");
+
+  return CURLE_BAD_CONTENT_ENCODING;
+}
+
+static CURLcode
+exit_zlib(z_stream *z, bool *zlib_init, CURLcode result)
+{
+  inflateEnd(z);
+  *zlib_init = 0;
+  return result;
+}
+
+CURLcode
+Curl_unencode_deflate_write(struct SessionHandle *data, 
+                            struct Curl_transfer_keeper *k,
+                            ssize_t nread)
+{
+  int status;                   /* zlib status */
+  int result;                   /* Curl_client_write status */
+  char decomp[DSIZ];            /* Put the decompressed data here. */
+  z_stream *z = &k->z;          /* zlib state structure */
+              
+  /* Initialize zlib? */
+  if (!k->zlib_init) {
+    z->zalloc = (alloc_func)Z_NULL;
+    z->zfree = (free_func)Z_NULL;
+    z->opaque = 0;              /* of dubious use 08/27/02 jhrg */
+    if (inflateInit(z) != Z_OK)
+      return process_zlib_error(data, z);
+    k->zlib_init = 1;
+  }
+
+  /* Set the compressed input when this fucntion is called */
+  z->next_in = (Bytef *)k->str;
+  z->avail_in = nread;
+
+  /* because the buffer size is fixed, iteratively decompress
+     and transfer to the client via client_write. */
+  for (;;) {
+    /* (re)set buffer for decompressed output for every iteration */
+    z->next_out = (Bytef *)&decomp[0];
+    z->avail_out = DSIZ;
+
+    status = inflate(z, Z_SYNC_FLUSH);
+    if (status == Z_OK || status == Z_STREAM_END) {
+      result = Curl_client_write(data, CLIENTWRITE_BODY, decomp, 
+                                 DSIZ - z->avail_out);
+      /* if !CURLE_OK, clean up, return */
+      if (result) {              
+        return exit_zlib(z, &k->zlib_init, result);
+      }
+
+      /* Done?; clean up, return */
+      if (status == Z_STREAM_END) {
+        if (inflateEnd(z) == Z_OK)
+          return exit_zlib(z, &k->zlib_init, result);
+        else
+          return exit_zlib(z, &k->zlib_init, process_zlib_error(data, z));
+      }
+
+      /* Done with these bytes, exit */
+      if (status == Z_OK && z->avail_in == 0 && z->avail_out > 0) 
+        return result;
+    }
+    else {                      /* Error; exit loop, handle below */
+      return exit_zlib(z, &k->zlib_init, process_zlib_error(data, z));
+    }
+  }
+}
+#endif /* HAVE_LIBZ */
+
+/*
+ * local variables:
+ * eval: (load-file "../curl-mode.el")
+ * end:
+ * vim600: fdm=marker
+ * vim: et sw=2 ts=2 sts=2 tw=78
+ */

lib/content_encoding.h

@@ -0,0 +1,34 @@
+/***************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ ***************************************************************************/
+
+CURLcode Curl_unencode_deflate_write(struct SessionHandle *data, 
+                                     struct Curl_transfer_keeper *k, 
+                                     ssize_t nread);
+          
+/*
+ * local variables:
+ * eval: (load-file "../curl-mode.el")
+ * end:
+ * vim600: fdm=marker
+ * vim: et sw=2 ts=2 sts=2 tw=78
+ */

lib/cookie.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 /***
 
@@ -121,7 +121,7 @@ free_cookiemess(struct Cookie *co)
 struct Cookie *
 Curl_cookie_add(struct CookieInfo *c,
                 bool httpheader, /* TRUE if HTTP header-style line */
-                char *lineptr,   /* first non-space of the line */
+                char *lineptr,   /* first character of the line */
                 char *domain)    /* default domain */
 {
   struct Cookie *clist;
@@ -146,6 +146,10 @@ Curl_cookie_add(struct CookieInfo *c,
     /* This line was read off a HTTP-header */
     char *sep;
     semiptr=strchr(lineptr, ';'); /* first, find a semicolon */
+
+    while(*lineptr && isspace((int)*lineptr))
+      lineptr++;
+
     ptr = lineptr;
     do {
       /* we have a <what>=<this> pair or a 'secure' word here */

lib/cookie.h

@@ -1,6 +1,6 @@
 #ifndef __COOKIE_H
 #define __COOKIE_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include <stdio.h>
 #ifdef WIN32

lib/curllib.dsp

@@ -1,394 +1,398 @@
-# Microsoft Developer Studio Project File - Name="curllib" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
-
-CFG=curllib - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "curllib.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "curllib.mak" CFG="curllib - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "curllib - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "curllib - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "curllib - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /YX /FD /c
-# ADD CPP /nologo /MD /W3 /GX /Zi /O2 /I "..\include" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /FR /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
-# ADD LINK32 kernel32.lib ws2_32.lib winmm.lib /nologo /dll /map /debug /machine:I386 /out:"Release/libcurl.dll"
-
-!ELSEIF  "$(CFG)" == "curllib - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /YX /FD /GZ /c
-# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\include" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /FR /FD /GZ /c
-# SUBTRACT CPP /WX /YX
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib ws2_32.lib winmm.lib /nologo /dll /incremental:no /map /debug /machine:I386 /out:"Debug/libcurl.dll" /pdbtype:sept
-# SUBTRACT LINK32 /nodefaultlib
-
-!ENDIF 
-
-# Begin Target
-
-# Name "curllib - Win32 Release"
-# Name "curllib - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=.\base64.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\connect.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\cookie.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\dict.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\dllinit.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\easy.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\escape.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\file.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\formdata.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\ftp.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\getdate.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\getenv.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\getinfo.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\getpass.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\hash.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\hostip.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\http.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\http_chunks.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\if2ip.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\krb4.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\ldap.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\libcurl.def
-# End Source File
-# Begin Source File
-
-SOURCE=.\llist.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\memdebug.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\mprintf.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\netrc.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\progress.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\security.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\sendf.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\speedcheck.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\ssluse.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\strequal.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\strtok.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\telnet.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\timeval.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\transfer.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\url.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\version.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=.\arpa_telnet.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\base64.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\connect.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\cookie.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\dict.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\escape.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\file.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\formdata.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\ftp.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\getdate.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\getenv.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\getpass.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\hostip.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\http.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\http_chunks.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\if2ip.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inet_ntoa_r.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\krb4.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\ldap.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\memdebug.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\netrc.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\progress.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\security.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\sendf.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\setup.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\speedcheck.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\ssluse.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\strequal.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\strtok.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\telnet.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\timeval.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\transfer.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\url.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\urldata.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project
+# Microsoft Developer Studio Project File - Name="curllib" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+
+CFG=curllib - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "curllib.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "curllib.mak" CFG="curllib - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "curllib - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "curllib - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "curllib - Win32 Release"
+
+# PROP BASE Use_MFC 6
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 6
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /Zi /O2 /I "..\include" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /FR /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
+# ADD LINK32 kernel32.lib ws2_32.lib winmm.lib /nologo /dll /map /debug /machine:I386 /out:"Release/libcurl.dll"
+
+!ELSEIF  "$(CFG)" == "curllib - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /I "..\include" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "CURLLIB_EXPORTS" /FR /FD /GZ /c
+# SUBTRACT CPP /WX /YX
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib ws2_32.lib winmm.lib /nologo /dll /incremental:no /map /debug /machine:I386 /out:"Debug/libcurl.dll" /pdbtype:sept
+# SUBTRACT LINK32 /nodefaultlib
+
+!ENDIF 
+
+# Begin Target
+
+# Name "curllib - Win32 Release"
+# Name "curllib - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=.\base64.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\connect.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\cookie.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\dict.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\dllinit.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\easy.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\escape.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\file.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\formdata.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\ftp.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\getdate.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\getenv.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\getinfo.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\getpass.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\hash.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\hostip.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\http.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\http_chunks.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\if2ip.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\krb4.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\ldap.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\libcurl.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\llist.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\memdebug.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\mprintf.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\multi.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\netrc.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\progress.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\security.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\sendf.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\speedcheck.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\ssluse.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\strequal.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\strtok.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\telnet.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\timeval.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\transfer.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\url.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\version.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=.\arpa_telnet.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\base64.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\connect.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\cookie.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\dict.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\escape.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\file.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\formdata.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\ftp.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\getdate.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\getenv.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\getpass.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\hostip.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\http.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\http_chunks.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\if2ip.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inet_ntoa_r.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\krb4.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\ldap.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\memdebug.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\netrc.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\progress.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\security.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\sendf.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\setup.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\speedcheck.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\ssluse.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\strequal.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\strtok.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\telnet.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\timeval.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\transfer.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\url.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\urldata.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

lib/curllib.dsw

@@ -1,29 +1,29 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "curllib"=".\curllib.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "curllib"=".\curllib.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

lib/dict.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/dict.h

@@ -1,7 +1,7 @@
 #ifndef __DICT_H
 #define __DICT_H
 
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -10,19 +10,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #ifndef CURL_DISABLE_DICT
 CURLcode Curl_dict(struct connectdata *conn);
 CURLcode Curl_dict_done(struct connectdata *conn);

lib/dllinit.c

@@ -64,6 +64,9 @@ DllMain (
 	 DWORD reason /* Reason this function is being called. */ ,
 	 LPVOID reserved /* Not used. */ )
 {
+  /* prevent compiler warnings */
+  (void) hInst;
+  (void) reserved;
 
   switch (reason)
     {

lib/easy.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/escape.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 /* Escape and unescape URL encoding in strings. The functions return a new
  * allocated string or NULL if an error occurred.  */
@@ -48,11 +48,9 @@ char *curl_escape(const char *string, int length)
   length = alloc-1;
   while(length--) {
     in = *string;
-    if(' ' == in)
-      ns[index++] = '+';
-    else if(!(in >= 'a' && in <= 'z') &&
-            !(in >= 'A' && in <= 'Z') &&
-            !(in >= '0' && in <= '9')) {
+    if(!(in >= 'a' && in <= 'z') &&
+       !(in >= 'A' && in <= 'Z') &&
+       !(in >= '0' && in <= '9')) {
       /* encode it */
       newlen += 2; /* the size grows with two, since this'll become a %XX */
       if(newlen > alloc) {
@@ -82,19 +80,10 @@ char *curl_unescape(const char *string, int length)
   unsigned char in;
   int index=0;
   unsigned int hex;
-  char querypart=FALSE; /* everything to the right of a '?' letter is
-                           the "query part" where '+' should become ' '.
-                           RFC 2316, section 3.10 */
   
   while(--alloc > 0) {
     in = *string;
-    if(querypart && ('+' == in))
-      in = ' ';
-    else if(!querypart && ('?' == in)) {
-      /* we have "walked in" to the query part */
-      querypart=TRUE;
-    }
-    else if('%' == in) {
+    if('%' == in) {
       /* encoded part */
       if(sscanf(string+1, "%02X", &hex)) {
         in = hex;
@@ -111,6 +100,11 @@ char *curl_unescape(const char *string, int length)
   
 }
 
+void curl_free(void *p)
+{
+  free(p);
+}
+
 /*
  * local variables:
  * eval: (load-file "../curl-mode.el")

lib/escape.h

@@ -1,7 +1,7 @@
 #ifndef __ESCAPE_H
 #define __ESCAPE_H
 
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -10,19 +10,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 /* Escape and unescape URL encoding in strings. The functions return a new
  * allocated string or NULL if an error occurred.  */
 

lib/file.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 
@@ -159,6 +159,16 @@ CURLcode Curl_file(struct connectdata *conn)
     expected_size = (double)statbuf.st_size;
   }
 
+  /* Added by Dolbneff A.V & Spiridonoff A.V */
+  if (conn->resume_from <= expected_size)
+    expected_size -= conn->resume_from;
+  else
+    /* Is this error code suitable in such situation? */
+    return CURLE_FTP_BAD_DOWNLOAD_RESUME;
+
+  if (expected_size == 0)
+    return CURLE_OK;
+
   /* The following is a shortcut implementation of file reading
      this is both more efficient than the former call to download() and
      it avoids problems with select() and recv() on file descriptors
@@ -166,6 +176,10 @@ CURLcode Curl_file(struct connectdata *conn)
   if(expected_size != -1)
     Curl_pgrsSetDownloadSize(data, expected_size);
 
+  if(conn->resume_from)
+    /* Added by Dolbneff A.V & Spiridonoff A.V */
+    lseek(fd, conn->resume_from, SEEK_SET);
+
   while (res == CURLE_OK) {
     nread = read(fd, buf, BUFSIZE-1);
 

lib/file.h

@@ -1,7 +1,7 @@
 #ifndef __FILE_H
 #define __FILE_H
 
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -10,19 +10,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #ifndef CURL_DISABLE_FILE
 CURLcode Curl_file(struct connectdata *conn);
 CURLcode Curl_file_connect(struct connectdata *conn);

lib/formdata.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 /*
   Debug the form generator stand-alone by compiling this source file with:

lib/formdata.h

@@ -1,7 +1,7 @@
 #ifndef __FORMDATA_H
 #define __FORMDATA_H
 
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -10,19 +10,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 /* plain and simple linked list with lines to send */
 struct FormData {
   struct FormData *next;

lib/ftp.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,23 +7,22 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 
-/* MN 06/07/02 */
 #ifndef CURL_DISABLE_FTP
 #include <stdio.h>
 #include <string.h>
@@ -388,33 +387,10 @@ int Curl_GetFTPResponse(char *buf,
   return nread; /* total amount of bytes read */
 }
 
-#ifndef ENABLE_IPV6
 /*
- * This function is only used by code that works on IPv4. When we add proper
- * support for that functionality with IPv6, this function can go in again.
+ * Curl_ftp_connect() should do everything that is to be considered a part of
+ * the connection phase.
  */
-/* -- who are we? -- */
-static char *getmyhost(char *buf, int buf_size)
-{
-#if defined(HAVE_GETHOSTNAME)
-  gethostname(buf, buf_size);
-#elif defined(HAVE_UNAME)
-  struct utsname ugnm;
-  strncpy(buf, uname(&ugnm) < 0 ? "localhost" : ugnm.nodename, buf_size - 1);
-  buf[buf_size - 1] = '\0';
-#else
-  /* We have no means of finding the local host name! */
-  strncpy(buf, "localhost", buf_size);
-  buf[buf_size - 1] = '\0';
-#endif
-  return buf;
-}
-
-#endif /* ipv4-only function */
-
-
-/* ftp_connect() should do everything that is to be considered a part
-   of the connection phase. */
 CURLcode Curl_ftp_connect(struct connectdata *conn)
 {
   /* this is FTP and no proxy */
@@ -656,26 +632,25 @@ CURLcode Curl_ftp_done(struct connectdata *conn)
   sclose(conn->secondarysocket);
   conn->secondarysocket = -1;
 
-  if(!data->set.no_body && !ftp->dont_check) {
+  if(!ftp->no_transfer) {
     /* now let's see what the server says about the transfer we just
        performed: */
     nread = Curl_GetFTPResponse(buf, conn, &ftpcode);
     if(nread < 0)
       return CURLE_OPERATION_TIMEOUTED;
 
-    /* 226 Transfer complete, 250 Requested file action okay, completed. */
-    if((ftpcode != 226) && (ftpcode != 250)) {
-      failf(data, "server did not report OK, got %d", ftpcode);
-      return CURLE_FTP_WRITE_ERROR;
+    if(!ftp->dont_check) {
+      /* 226 Transfer complete, 250 Requested file action okay, completed. */
+      if((ftpcode != 226) && (ftpcode != 250)) {
+        failf(data, "server did not report OK, got %d", ftpcode);
+        return CURLE_FTP_WRITE_ERROR;
+      }
     }
   }
-  if(ftp->dont_check) {
-    /* if we don't check, we can't re-use this connection as it leaves the
-       control connection in a weird status */
-    conn->bits.close = TRUE;
-  }
 
-  conn->bits.resume_done = FALSE; /* clean this for next connection */
+  /* clear these for next connection */
+  ftp->no_transfer = FALSE;
+  ftp->dont_check = FALSE; 
 
   /* Send any post-transfer QUOTE strings? */
   if(!result && data->set.postquote)
@@ -736,8 +711,7 @@ CURLcode ftp_cwd(struct connectdata *conn, char *path)
   CURLcode result;
   
   FTPSENDF(conn, "CWD %s", path);
-  nread = Curl_GetFTPResponse(
-                              conn->data->state.buffer, conn, &ftpcode);
+  nread = Curl_GetFTPResponse(conn->data->state.buffer, conn, &ftpcode);
   if (nread < 0)
     return CURLE_OPERATION_TIMEOUTED;
 
@@ -906,9 +880,11 @@ ftp_pasv_verbose(struct connectdata *conn,
   /* Bjorn Reese (November 28 2001):
      The Tru64 man page on gethostbyaddr_r() says that
      the hostent struct must be filled with zeroes before the call to
-     gethostbyaddr_r(). */
+     gethostbyaddr_r(). 
 
-  memset(hostent_buf, 0, sizeof(struct hostent));
+     ... as must be struct hostent_data Craig Markwardt 19 Sep 2002. */
+
+  memset(hostent_buf, 0, sizeof(struct hostent)+sizeof(struct hostent_data));
 
   if(gethostbyaddr_r((char *) &address,
                      sizeof(address), AF_INET,
@@ -1211,6 +1187,7 @@ CURLcode ftp_use_port(struct connectdata *conn)
   char *hostdataptr=NULL;
   unsigned short porttouse;
   char myhost[256] = "";
+  bool sa_filled_in = FALSE;
 
   if(data->set.ftpport) {
     if(Curl_if2ip(data->set.ftpport, myhost, sizeof(myhost))) {
@@ -1225,12 +1202,20 @@ CURLcode ftp_use_port(struct connectdata *conn)
     }
   }
   if(! *myhost) {
-    char *tmp_host = getmyhost(myhost, sizeof(myhost));
-    h=Curl_resolv(data, tmp_host, 0);
+    /* pick a suitable default here */
+
+    socklen_t sslen;
+    
+    sslen = sizeof(sa);
+    if (getsockname(conn->firstsocket, (struct sockaddr *)&sa, &sslen) < 0) {
+      failf(data, "getsockname() failed");
+      return CURLE_FTP_PORT_FAILED;
+    }
+
+    sa_filled_in = TRUE; /* the sa struct is filled in */
   }
-  infof(data, "We connect from %s\n", myhost);
-  
-  if ( h ) {
+
+  if ( h || sa_filled_in) {
     if( (portsock = socket(AF_INET, SOCK_STREAM, 0)) >= 0 ) {
       int size;
       
@@ -1239,12 +1224,15 @@ CURLcode ftp_use_port(struct connectdata *conn)
          we fail before the true secondary stuff is made */
       conn->secondarysocket = portsock;
 
-      memset((char *)&sa, 0, sizeof(sa));
-      memcpy((char *)&sa.sin_addr,
-             h->h_addr,
-             h->h_length);
-      sa.sin_family = AF_INET;
-      sa.sin_addr.s_addr = INADDR_ANY;
+      if(!sa_filled_in) {
+        memset((char *)&sa, 0, sizeof(sa));
+        memcpy((char *)&sa.sin_addr,
+               h->h_addr,
+               h->h_length);
+        sa.sin_family = AF_INET;
+        sa.sin_addr.s_addr = INADDR_ANY;
+      }
+
       sa.sin_port = 0;
       size = sizeof(sa);
       
@@ -1288,7 +1276,10 @@ CURLcode ftp_use_port(struct connectdata *conn)
 #endif
     struct in_addr in;
     unsigned short ip[5];
-    (void) memcpy(&in.s_addr, *h->h_addr_list, sizeof (in.s_addr));
+    (void) memcpy(&in.s_addr,
+                  h?*h->h_addr_list:(char *)&sa.sin_addr.s_addr,
+                  sizeof (in.s_addr));
+
 #ifdef HAVE_INET_NTOA_R
     /* ignore the return code from inet_ntoa_r() as it is int or
        char * depending on system */
@@ -1299,6 +1290,9 @@ CURLcode ftp_use_port(struct connectdata *conn)
     sscanf( inet_ntoa(in), "%hu.%hu.%hu.%hu",
             &ip[0], &ip[1], &ip[2], &ip[3]);
 #endif
+    infof(data, "Telling server to connect to %d.%d.%d.%d:%d\n",
+          ip[0], ip[1], ip[2], ip[3], porttouse);
+  
     result=Curl_ftpsendf(conn, "PORT %d,%d,%d,%d,%d,%d",
                          ip[0], ip[1], ip[2], ip[3],
                          porttouse >> 8,
@@ -1330,7 +1324,8 @@ CURLcode ftp_use_port(struct connectdata *conn)
  */
 
 static
-CURLcode ftp_use_pasv(struct connectdata *conn)
+CURLcode ftp_use_pasv(struct connectdata *conn,
+                      bool *connected)
 {
   struct SessionHandle *data = conn->data;
   ssize_t nread;
@@ -1482,7 +1477,14 @@ CURLcode ftp_use_pasv(struct connectdata *conn)
                             addr,
                             connectport,
                             &conn->secondarysocket,
-                            &conninfo);
+                            &conninfo,
+                            connected);
+
+  /*
+   * When this is used from the multi interface, this might've returned with
+   * the 'connected' set to FALSE and thus we are now awaiting a non-blocking
+   * connect to connect and we should not be "hanging" here waiting.
+   */
   
   if((CURLE_OK == result) &&       
      data->set.verbose)
@@ -1503,125 +1505,24 @@ CURLcode ftp_use_pasv(struct connectdata *conn)
   return CURLE_OK;
 }
 
-/***********************************************************************
+/*
+ * Curl_ftp_nextconnect()
  *
- * ftp_perform()
- *
- * This is the actual DO function for FTP. Get a file/directory according to
- * the options previously setup.
+ * This function shall be called when the second FTP connection has been
+ * established and is confirmed connected.
  */
 
-static
-CURLcode ftp_perform(struct connectdata *conn)
+CURLcode Curl_ftp_nextconnect(struct connectdata *conn)
 {
-  /* this is FTP and no proxy */
-  ssize_t nread;
-  CURLcode result=CURLE_OK;
   struct SessionHandle *data=conn->data;
   char *buf = data->state.buffer; /* this is our buffer */
+  CURLcode result;
+  ssize_t nread;
+  int ftpcode; /* for ftp status */
 
   /* the ftp struct is already inited in ftp_connect() */
   struct FTP *ftp = conn->proto.ftp;
-
   long *bytecountp = ftp->bytecountp;
-  int ftpcode; /* for ftp status */
-
-  /* Send any QUOTE strings? */
-  if(data->set.quote) {
-    if ((result = ftp_sendquote(conn, data->set.quote)) != CURLE_OK)
-      return result;
-  }
-    
-  /* This is a re-used connection. Since we change directory to where the
-     transfer is taking place, we must now get back to the original dir
-     where we ended up after login: */
-  if (conn->bits.reuse) {
-    if ((result = ftp_cwd(conn, ftp->entrypath)) != CURLE_OK)
-      return result;
-  }
-
-  /* change directory first! */
-  if(ftp->dir && ftp->dir[0]) {
-    if ((result = ftp_cwd(conn, ftp->dir)) != CURLE_OK)
-        return result;
-  }
-
-  /* Requested time of file? */
-  if(data->set.get_filetime && ftp->file) {
-    result = ftp_getfiletime(conn, ftp->file);
-    if(result)
-      return result;
-  }
-
-  /* If we have selected NOBODY and HEADER, it means that we only want file
-     information. Which in FTP can't be much more than the file size and
-     date. */
-  if(data->set.no_body && data->set.include_header && ftp->file) {
-    /* The SIZE command is _not_ RFC 959 specified, and therefor many servers
-       may not support it! It is however the only way we have to get a file's
-       size! */
-    ssize_t filesize;
-
-    /* Some servers return different sizes for different modes, and thus we
-       must set the proper type before we check the size */
-    result = ftp_transfertype(conn, data->set.ftp_ascii);
-    if(result)
-      return result;
-
-    /* failing to get size is not a serious error */
-    result = ftp_getsize(conn, ftp->file, &filesize);
-
-    if(CURLE_OK == result) {
-      sprintf(buf, "Content-Length: %d\r\n", filesize);
-      result = Curl_client_write(data, CLIENTWRITE_BOTH, buf, 0);
-      if(result)
-        return result;
-    }
-
-    /* If we asked for a time of the file and we actually got one as
-       well, we "emulate" a HTTP-style header in our output. */
-
-#ifdef HAVE_STRFTIME
-    if(data->set.get_filetime && data->info.filetime) {
-      struct tm *tm;
-#ifdef HAVE_LOCALTIME_R
-      struct tm buffer;
-      tm = (struct tm *)localtime_r(&data->info.filetime, &buffer);
-#else
-      tm = localtime((unsigned long *)&data->info.filetime);
-#endif
-      /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */
-      strftime(buf, BUFSIZE-1, "Last-Modified: %a, %d %b %Y %H:%M:%S %Z\r\n",
-               tm);
-      result = Curl_client_write(data, CLIENTWRITE_BOTH, buf, 0);
-      if(result)
-        return result;
-    }
-#endif
-
-    return CURLE_OK;
-  }
-
-  if(data->set.no_body)
-    /* don't transfer the data */
-    ftp->dont_check = TRUE;
-  /* Get us a second connection up and connected */
-  else if(data->set.ftp_use_port) {
-    /* We have chosen to use the PORT command */
-    result = ftp_use_port(conn);
-    if(CURLE_OK == result)
-      /* we have the data connection ready */
-      infof(data, "Connected the data stream with PORT!\n");
-  }
-  else {
-    /* We have chosen (this is default) to use the PASV command */
-    result = ftp_use_pasv(conn);
-    if(CURLE_OK == result)
-      infof(data, "Connected the data stream with PASV!\n");
-  }
-  
-  if(result)
-    return result;
 
   if(data->set.upload) {
 
@@ -1700,11 +1601,9 @@ CURLcode ftp_perform(struct connectdata *conn)
             /* no data to transfer */
             result=Curl_Transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
             
-            /* Set resume done and dont_check so that we won't get any error
-             * in Curl_ftp_done() because we didn't transfer the amount of
-             * bytes that the local file file obviously is */
-            conn->bits.resume_done = TRUE; 
-            ftp->dont_check = TRUE;
+            /* Set no_transfer so that we won't get any error in
+             * Curl_ftp_done() because we didn't transfer anything! */
+            ftp->no_transfer = TRUE; 
 
             return CURLE_OK;
           }
@@ -1793,7 +1692,6 @@ CURLcode ftp_perform(struct connectdata *conn)
       }
       infof(data, "range-download from %d to %d, totally %d bytes\n",
             from, to, totalsize);
-      conn->bits.resume_done = TRUE; /* to prevent some error due to this */
       ftp->dont_check = TRUE; /* dont check for successful transfer */
     }
 
@@ -1887,12 +1785,9 @@ CURLcode ftp_perform(struct connectdata *conn)
           result=Curl_Transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
           infof(data, "File already completely downloaded\n");
 
-          /* Set resume done so that we won't get any error in Curl_ftp_done()
-           * because we didn't transfer the amount of bytes that the remote
-           * file obviously is */
-          conn->bits.resume_done = TRUE; 
-          ftp->dont_check = TRUE;
-
+          /* Set no_transfer so that we won't get any error in Curl_ftp_done()
+           * because we didn't transfer the any file */
+          ftp->no_transfer = TRUE;
           return CURLE_OK;
         }
 	
@@ -2004,6 +1899,128 @@ CURLcode ftp_perform(struct connectdata *conn)
   return CURLE_OK;
 }
 
+/***********************************************************************
+ *
+ * ftp_perform()
+ *
+ * This is the actual DO function for FTP. Get a file/directory according to
+ * the options previously setup.
+ */
+
+static
+CURLcode ftp_perform(struct connectdata *conn,
+                     bool *connected)  /* for the TCP connect status after
+                                          PASV / PORT */
+{
+  /* this is FTP and no proxy */
+  CURLcode result=CURLE_OK;
+  struct SessionHandle *data=conn->data;
+  char *buf = data->state.buffer; /* this is our buffer */
+
+  /* the ftp struct is already inited in ftp_connect() */
+  struct FTP *ftp = conn->proto.ftp;
+
+  /* Send any QUOTE strings? */
+  if(data->set.quote) {
+    if ((result = ftp_sendquote(conn, data->set.quote)) != CURLE_OK)
+      return result;
+  }
+    
+  /* This is a re-used connection. Since we change directory to where the
+     transfer is taking place, we must now get back to the original dir
+     where we ended up after login: */
+  if (conn->bits.reuse && ftp->entrypath) {
+    if ((result = ftp_cwd(conn, ftp->entrypath)) != CURLE_OK)
+      return result;
+  }
+
+  /* change directory first! */
+  if(ftp->dir && ftp->dir[0]) {
+    if ((result = ftp_cwd(conn, ftp->dir)) != CURLE_OK)
+        return result;
+  }
+
+  /* Requested time of file? */
+  if(data->set.get_filetime && ftp->file) {
+    result = ftp_getfiletime(conn, ftp->file);
+    if(result)
+      return result;
+  }
+
+  /* If we have selected NOBODY and HEADER, it means that we only want file
+     information. Which in FTP can't be much more than the file size and
+     date. */
+  if(data->set.no_body && data->set.include_header && ftp->file) {
+    /* The SIZE command is _not_ RFC 959 specified, and therefor many servers
+       may not support it! It is however the only way we have to get a file's
+       size! */
+    ssize_t filesize;
+
+    ftp->no_transfer = TRUE; /* this means no actual transfer is made */
+    
+    /* Some servers return different sizes for different modes, and thus we
+       must set the proper type before we check the size */
+    result = ftp_transfertype(conn, data->set.ftp_ascii);
+    if(result)
+      return result;
+
+    /* failing to get size is not a serious error */
+    result = ftp_getsize(conn, ftp->file, &filesize);
+
+    if(CURLE_OK == result) {
+      sprintf(buf, "Content-Length: %d\r\n", filesize);
+      result = Curl_client_write(data, CLIENTWRITE_BOTH, buf, 0);
+      if(result)
+        return result;
+    }
+
+    /* If we asked for a time of the file and we actually got one as
+       well, we "emulate" a HTTP-style header in our output. */
+
+#ifdef HAVE_STRFTIME
+    if(data->set.get_filetime && data->info.filetime) {
+      struct tm *tm;
+#ifdef HAVE_LOCALTIME_R
+      struct tm buffer;
+      tm = (struct tm *)localtime_r(&data->info.filetime, &buffer);
+#else
+      tm = localtime((unsigned long *)&data->info.filetime);
+#endif
+      /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */
+      strftime(buf, BUFSIZE-1, "Last-Modified: %a, %d %b %Y %H:%M:%S %Z\r\n",
+               tm);
+      result = Curl_client_write(data, CLIENTWRITE_BOTH, buf, 0);
+      if(result)
+        return result;
+    }
+#endif
+
+    return CURLE_OK;
+  }
+
+  if(data->set.no_body)
+    /* doesn't really transfer any data */
+    ftp->no_transfer = TRUE;
+  /* Get us a second connection up and connected */
+  else if(data->set.ftp_use_port) {
+    /* We have chosen to use the PORT command */
+    result = ftp_use_port(conn);
+    if(CURLE_OK == result) {
+      /* we have the data connection ready */
+      infof(data, "Ordered connect of the data stream with PORT!\n");
+      *connected = TRUE; /* mark us "still connected" */
+    }
+  }
+  else {
+    /* We have chosen (this is default) to use the PASV command */
+    result = ftp_use_pasv(conn, connected);
+    if(connected)
+      infof(data, "Connected the data stream with PASV!\n");
+  }
+  
+  return result;
+}
+
 /***********************************************************************
  *
  * Curl_ftp()
@@ -2016,6 +2033,7 @@ CURLcode ftp_perform(struct connectdata *conn)
 CURLcode Curl_ftp(struct connectdata *conn)
 {
   CURLcode retcode;
+  bool connected;
 
   struct SessionHandle *data = conn->data;
   struct FTP *ftp;
@@ -2062,15 +2080,15 @@ CURLcode Curl_ftp(struct connectdata *conn)
   else
     ftp->dir = NULL;
 
-  retcode = ftp_perform(conn);
+  retcode = ftp_perform(conn, &connected);
 
-  /* clean up here, success or error doesn't matter */
-  if(ftp->file)
-    free(ftp->file);
-  if(ftp->dir)
-    free(ftp->dir);
-
-  ftp->file = ftp->dir = NULL; /* zero */
+  if(CURLE_OK == retcode) {
+    if(connected)
+      retcode = Curl_ftp_nextconnect(conn);
+    else
+      /* since we didn't connect now, we want do_more to get called */
+      conn->do_more = TRUE;
+  }
 
   return retcode;
 }
@@ -2141,6 +2159,12 @@ CURLcode Curl_ftp_disconnect(struct connectdata *conn)
       free(ftp->entrypath);
     if(ftp->cache)
       free(ftp->cache);
+    if(ftp->file)
+      free(ftp->file);
+    if(ftp->dir)
+      free(ftp->dir);
+
+    ftp->file = ftp->dir = NULL; /* zero */
   }
   return CURLE_OK;
 }

lib/ftp.h

@@ -1,7 +1,6 @@
 #ifndef __FTP_H
 #define __FTP_H
-
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -10,36 +9,29 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
-/* MN 06/07/02 */
 #ifndef CURL_DISABLE_FTP
-
 CURLcode Curl_ftp(struct connectdata *conn);
 CURLcode Curl_ftp_done(struct connectdata *conn);
 CURLcode Curl_ftp_connect(struct connectdata *conn);
 CURLcode Curl_ftp_disconnect(struct connectdata *conn);
-
 CURLcode Curl_ftpsendf(struct connectdata *, const char *fmt, ...);
-
-/* The kerberos stuff needs this: */
 int Curl_GetFTPResponse(char *buf, struct connectdata *conn,
                         int *ftpcode);
-
-/* MN 06/07/02 */
+CURLcode Curl_ftp_nextconnect(struct connectdata *conn);
 #endif
 
-
 #endif

lib/getenv.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/getinfo.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/getinfo.h

@@ -1,6 +1,6 @@
 #ifndef __GETINFO_H
 #define __GETINFO_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 CURLcode Curl_getinfo(struct SessionHandle *data, CURLINFO info, ...);
 CURLcode Curl_initinfo(struct SessionHandle *data);
 

lib/getpass.c

@@ -93,14 +93,10 @@ char *getpass_r(const char *prompt, char *buffer, size_t buflen)
 #include "memdebug.h"
 #endif
 
-/* no perror? make an fprintf! */
-#ifndef HAVE_PERROR
-#  define perror(x) fprintf(stderr, "Error in: %s\n", x)
-#endif
-
 char *getpass_r(const char *prompt, char *buffer, size_t buflen)
 {
   FILE *infp;
+  char infp_fclose = 0;
   FILE *outfp;
   RETSIGTYPE (*sigint)();
 #ifndef __EMX__
@@ -127,41 +123,30 @@ char *getpass_r(const char *prompt, char *buffer, size_t buflen)
   sigtstp = signal(SIGTSTP, SIG_IGN);
 #endif
 
-  if( (infp=fopen("/dev/tty", "r")) == NULL )
-  {
+  infp=fopen("/dev/tty", "r");
+  if( NULL == infp )
     infp = stdin;
-  }
-  if( (outfp=fopen("/dev/tty", "w")) == NULL )
-  {
-    outfp = stderr;
-  }
+  else
+    infp_fclose = 1;
+
+  outfp = stderr;
+
   infd = fileno(infp);
   outfd = fileno(outfp);
 
   /* dissable echo */
 #ifdef HAVE_TERMIOS_H
-  if(tcgetattr(outfd, &orig) != 0)
-  {
-    ; /*perror("tcgetattr");*/
-  }
+  tcgetattr(outfd, &orig);
+
   noecho = orig;
   noecho.c_lflag &= ~ECHO;
-  if(tcsetattr(outfd, TCSANOW, &noecho) != 0)
-  {
-    ; /*perror("tcgetattr");*/
-  }
+  tcsetattr(outfd, TCSANOW, &noecho);
 #else
 #  ifdef HAVE_TERMIO_H
-  if(ioctl(outfd, TCGETA, &orig) != 0)
-  {
-    ; /*perror("ioctl");*/
-  }
+  ioctl(outfd, TCGETA, &orig);
   noecho = orig;
   noecho.c_lflag &= ~ECHO;
-  if(ioctl(outfd, TCSETA, &noecho) != 0)
-  {
-    ; /*perror("ioctl");*/
-  }
+  ioctl(outfd, TCSETA, &noecho);
 #  else
 #  endif
 #endif
@@ -187,16 +172,10 @@ char *getpass_r(const char *prompt, char *buffer, size_t buflen)
    * user types more than buflen
    */
 #ifdef HAVE_TERMIOS_H
-  if(tcsetattr(outfd, TCSAFLUSH, &orig) != 0)
-  {
-    ; /*perror("tcgetattr");*/
-  }
+  tcsetattr(outfd, TCSAFLUSH, &orig);
 #else
 #  ifdef HAVE_TERMIO_H
-  if(ioctl(outfd, TCSETA, &orig) != 0)
-  {
-    ; /*perror("ioctl");*/
-  }
+  ioctl(outfd, TCSETA, &orig);
 #  else
 #  endif
 #endif
@@ -206,6 +185,9 @@ char *getpass_r(const char *prompt, char *buffer, size_t buflen)
   signal(SIGTSTP, sigtstp);
 #endif
 
+  if(infp_fclose)
+    fclose(infp);
+
   return buffer; /* we always return success */
 }
 #endif /* VMS */

lib/getpass.h

@@ -1,6 +1,6 @@
 #ifndef __GETPASS_H
 #define __GETPASS_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #ifndef HAVE_GETPASS_R
 /* If there's a system-provided function named like this, we trust it is
    also found in one of the standard headers. */

lib/hash.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/hash.h

@@ -1,6 +1,6 @@
 #ifndef __HASH_H
 #define __HASH_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/hostip.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 
@@ -526,23 +526,26 @@ Curl_addrinfo *Curl_getaddrinfo(struct SessionHandle *data,
 
   if ( (in=inet_addr(hostname)) != INADDR_NONE ) {
     struct in_addr *addrentry;
-    long *buf = (long *)malloc(sizeof(struct hostent)+128);
+    struct namebuf {
+        struct hostent hostentry;
+        char *h_addr_list[2];
+        struct in_addr addrentry;
+        char h_name[128];
+    } *buf = (struct namebuf *)malloc(sizeof(struct namebuf));
     if(!buf)
       return NULL; /* major failure */
     *bufp = (char *)buf;
 
-    h = (struct hostent*)buf;
-    h->h_addr_list = (char**)(buf + sizeof(*h));
-    addrentry = (struct in_addr*)(h->h_addr_list + 2);
+    h = &buf->hostentry;
+    h->h_addr_list = &buf->h_addr_list[0];
+    addrentry = &buf->addrentry;
     addrentry->s_addr = in;
     h->h_addr_list[0] = (char*)addrentry;
     h->h_addr_list[1] = NULL;
     h->h_addrtype = AF_INET;
     h->h_length = sizeof(*addrentry);
-    h->h_name = *(h->h_addr_list) + h->h_length;
-    /* bad one h->h_name = (char*)(h->h_addr_list + h->h_length); */
-    MakeIP(ntohl(in),h->h_name, sizeof(struct hostent)+128 -
-           (long)(h->h_name) + (long)buf);
+    h->h_name = &buf->h_name[0];
+    MakeIP(ntohl(in), h->h_name, sizeof(buf->h_name));
   }
 #if defined(HAVE_GETHOSTBYNAME_R)
   else {
@@ -559,6 +562,7 @@ Curl_addrinfo *Curl_getaddrinfo(struct SessionHandle *data,
     memset(buf, 0, CURL_NAMELOOKUP_SIZE);
 #ifdef HAVE_GETHOSTBYNAME_R_5
     /* Solaris, IRIX and more */
+    (void)res; /* prevent compiler warning */
     while(!h) {
       h = gethostbyname_r(hostname,
                           (struct hostent *)buf,
@@ -601,6 +605,8 @@ Curl_addrinfo *Curl_getaddrinfo(struct SessionHandle *data,
                                &h_errnop))==ERANGE) {
       step_size+=200;
     }
+    if(!h) /* failure */
+      res=1;
     
 #ifdef MALLOCDEBUG
     infof(data, "gethostbyname_r() uses %d bytes\n", step_size);
@@ -627,7 +633,7 @@ Curl_addrinfo *Curl_getaddrinfo(struct SessionHandle *data,
 
       ret = gethostbyname_r(hostname,
                             (struct hostent *)buf,
-                            (struct hostent_data *)(buf + sizeof(struct hostent)));
+                            (struct hostent_data *)((char *)buf + sizeof(struct hostent)));
     else
       ret = -1; /* failure, too smallish buffer size */
     

lib/hostip.h

@@ -1,6 +1,6 @@
 #ifndef __HOSTIP_H
 #define __HOSTIP_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "hash.h"
 

lib/http.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 
@@ -420,7 +420,7 @@ CURLcode Curl_http_connect(struct connectdata *conn)
    * has occured, can we start talking SSL
    */
 
-  if(data->change.proxy &&
+  if(data->change.proxy && (data->set.proxytype == CURLPROXY_HTTP) &&
      ((conn->protocol & PROT_HTTPS) || data->set.tunnel_thru_httpproxy)) {
 
     /* either HTTPS over proxy, OR explicitly asked for a tunnel */
@@ -449,23 +449,21 @@ CURLcode Curl_http_connect(struct connectdata *conn)
 CURLcode Curl_http_done(struct connectdata *conn)
 {
   struct SessionHandle *data;
-  long *bytecount = &conn->bytecount;
   struct HTTP *http;
 
   data=conn->data;
   http=conn->proto.http;
 
   if(HTTPREQ_POST_FORM == data->set.httpreq) {
-    *bytecount = http->readbytecount + http->writebytecount;
+    conn->bytecount = http->readbytecount + http->writebytecount;
       
     Curl_formclean(http->sendit); /* Now free that whole lot */
 
     data->set.fread = http->storefread; /* restore */
     data->set.in = http->in; /* restore */
   }
-  else if(HTTPREQ_PUT == data->set.httpreq) {
-    *bytecount = http->readbytecount + http->writebytecount;
-  }
+  else if(HTTPREQ_PUT == data->set.httpreq)
+    conn->bytecount = http->readbytecount + http->writebytecount;
 
   if(0 == (http->readbytecount + conn->headerbytecount)) {
     /* nothing was read from the HTTP server, this can't be right
@@ -487,7 +485,6 @@ CURLcode Curl_http(struct connectdata *conn)
   struct Cookie *co=NULL; /* no cookies from start */
   char *ppath = conn->ppath; /* three previous function arguments */
   char *host = conn->name;
-  long *bytecount = &conn->bytecount;
 
   if(!conn->proto.http) {
     /* Only allocate this struct if we don't already have it! */
@@ -552,7 +549,7 @@ CURLcode Curl_http(struct connectdata *conn)
   if(data->cookies) {
     co = Curl_cookie_getlist(data->cookies,
                              host, ppath,
-                             conn->protocol&PROT_HTTPS?TRUE:FALSE);
+                             (conn->protocol&PROT_HTTPS?TRUE:FALSE));
   }
   if (data->change.proxy &&
       !data->set.tunnel_thru_httpproxy &&
@@ -581,13 +578,22 @@ CURLcode Curl_http(struct connectdata *conn)
     if(conn->allocptr.host)
       free(conn->allocptr.host);
 
+    /* When building Host: headers, we must put the host name within
+       [brackets] if the host name is a plain IPv6-address. RFC2732-style. */
+       
     if(((conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTPS)) ||
        (!(conn->protocol&PROT_HTTPS) && (conn->remote_port == PORT_HTTP)) )
       /* If (HTTPS on port 443) OR (non-HTTPS on port 80) then don't include
          the port number in the host string */
-      conn->allocptr.host = aprintf("Host: %s\r\n", host);
+      conn->allocptr.host = aprintf("Host: %s%s%s\r\n",
+                                    conn->bits.ipv6_ip?"[":"",
+                                    host,
+                                    conn->bits.ipv6_ip?"]":"");
     else
-      conn->allocptr.host = aprintf("Host: %s:%d\r\n", host,
+      conn->allocptr.host = aprintf("Host: %s%s%s:%d\r\n",
+                                    conn->bits.ipv6_ip?"[":"",
+                                    host,
+                                    conn->bits.ipv6_ip?"]":"",
                                     conn->remote_port);
   }
 
@@ -663,6 +669,9 @@ CURLcode Curl_http(struct connectdata *conn)
      */
     if((data->set.httpreq == HTTPREQ_GET) &&
        !checkheaders(data, "Range:")) {
+      /* if a line like this was already allocated, free the previous one */
+      if(conn->allocptr.rangeline)
+        free(conn->allocptr.rangeline);
       conn->allocptr.rangeline = aprintf("Range: bytes=%s\r\n", conn->range);
     }
     else if((data->set.httpreq != HTTPREQ_GET) &&
@@ -707,6 +716,7 @@ CURLcode Curl_http(struct connectdata *conn)
                 "%s" /* host */
                 "%s" /* pragma */
                 "%s" /* accept */
+                "%s" /* accept-encoding */
                 "%s", /* referer */
 
                 data->set.customrequest?data->set.customrequest:
@@ -727,6 +737,8 @@ CURLcode Curl_http(struct connectdata *conn)
                 (conn->allocptr.host?conn->allocptr.host:""), /* Host: host */
                 http->p_pragma?http->p_pragma:"",
                 http->p_accept?http->p_accept:"",
+                (data->set.encoding && *data->set.encoding && conn->allocptr.accept_encoding)?
+                conn->allocptr.accept_encoding:"", /* 08/28/02 jhrg */
                 (data->change.referer && conn->allocptr.ref)?conn->allocptr.ref:"" /* Referer: <data> <CRLF> */
                 );
 
@@ -953,7 +965,8 @@ CURLcode Curl_http(struct connectdata *conn)
         failf(data, "Failed sending HTTP POST request");
       else
         result =
-          Curl_Transfer(conn, conn->firstsocket, -1, TRUE, bytecount,
+          Curl_Transfer(conn, conn->firstsocket, -1, TRUE,
+                        &http->readbytecount,
                         data->set.postfields?-1:conn->firstsocket,
                         data->set.postfields?NULL:&http->writebytecount);
       break;
@@ -969,7 +982,8 @@ CURLcode Curl_http(struct connectdata *conn)
         failf(data, "Failed sending HTTP request");
       else
         /* HTTP GET/HEAD download: */
-        result = Curl_Transfer(conn, conn->firstsocket, -1, TRUE, bytecount,
+        result = Curl_Transfer(conn, conn->firstsocket, -1, TRUE,
+                               &http->readbytecount,
                                -1, NULL); /* nothing to upload */
     }
     if(result)

lib/http.h

@@ -1,7 +1,7 @@
 #ifndef __HTTP_H
 #define __HTTP_H
 
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -10,19 +10,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #ifndef CURL_DISABLE_HTTP
 /* ftp can use this as well */
 CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,

lib/http_chunks.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #include "setup.h"
 
 #ifndef CURL_DISABLE_HTTP
@@ -33,6 +33,8 @@
 #include "urldata.h" /* it includes http_chunks.h */
 #include "sendf.h"   /* for the client write stuff */
 
+#include "content_encoding.h"   /* 08/29/02 jhrg */
+
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
 
@@ -172,7 +174,32 @@ CHUNKcode Curl_httpchunk_read(struct connectdata *conn,
       piece = (ch->datasize >= length)?length:ch->datasize;
 
       /* Write the data portion available */
-      result = Curl_client_write(conn->data, CLIENTWRITE_BODY, datap, piece);
+      /* Added content-encoding here; untested but almost identical to the
+         tested code in transfer.c. 08/29/02 jhrg */
+#ifdef HAVE_LIBZ
+      switch (conn->keep.content_encoding) {
+        case IDENTITY:
+#endif
+          result = Curl_client_write(conn->data, CLIENTWRITE_BODY, datap,
+                                     piece);
+#ifdef HAVE_LIBZ
+          break;
+
+        case DEFLATE: 
+          result = Curl_unencode_deflate_write(conn->data, &conn->keep, piece);
+          break;
+
+        case GZIP:
+        case COMPRESS:
+        default:
+          failf (conn->data,
+                 "Unrecognized content encoding type. "
+                 "libcurl understands `identity' and `deflate' "
+                 "content encodings.");
+          return CHUNKE_BAD_ENCODING;
+      }
+#endif
+
       if(result)
         return CHUNKE_WRITE_ERROR;
       *wrote += piece;

lib/http_chunks.h

@@ -1,6 +1,6 @@
 #ifndef __HTTP_CHUNKS_H
 #define __HTTP_CHUNKS_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 /*
  * The longest possible hexadecimal number we support in a chunked transfer.
  * Weird enough, RFC2616 doesn't set a maximum size! Since we use strtoul()
@@ -73,6 +73,7 @@ typedef enum {
   CHUNKE_BAD_CHUNK,
   CHUNKE_WRITE_ERROR,
   CHUNKE_STATE_ERROR,
+  CHUNKE_BAD_ENCODING,
   CHUNKE_LAST
 } CHUNKcode;
 

lib/if2ip.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/if2ip.h

@@ -1,6 +1,6 @@
 #ifndef __IF2IP_H
 #define __IF2IP_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #include "setup.h"
 
 #if ! defined(WIN32) && ! defined(__BEOS__) && !defined(__CYGWIN32__)

lib/krb4.h

@@ -1,6 +1,6 @@
 #ifndef __KRB4_H
 #define __KRB4_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 void Curl_krb_kauth(struct connectdata *conn);
 
 #endif

lib/ldap.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/ldap.h

@@ -1,7 +1,7 @@
 #ifndef __LDAP_H
 #define __LDAP_H
 
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -10,19 +10,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 #ifndef CURL_DISABLE_LDAP
 CURLcode Curl_ldap(struct connectdata *conn);
 CURLcode Curl_ldap_done(struct connectdata *conn);

lib/libcurl.def

@@ -1,36 +1,43 @@
-;
-; Definition file for the DLL version of the LIBCURL library from curl
-;
-
-LIBRARY		LIBCURL
-
-DESCRIPTION	'curl libcurl - http://curl.haxx.se'
-
-EXPORTS
-	curl_easy_cleanup @ 1 ;
-	curl_easy_getinfo @ 2 ;
-	curl_easy_init @ 3 ;
-	curl_easy_perform @ 4 ;
-	curl_easy_setopt @ 5 ;
+;
+; Definition file for the DLL version of the LIBCURL library from curl
+;
+
+LIBRARY		LIBCURL
+
+DESCRIPTION	'curl libcurl - http://curl.haxx.se'
+
+EXPORTS
+	curl_easy_cleanup @ 1 ;
+	curl_easy_getinfo @ 2 ;
+	curl_easy_init @ 3 ;
+	curl_easy_perform @ 4 ;
+	curl_easy_setopt @ 5 ;
 	curl_escape @ 6 ;
-	curl_unescape @ 7;
-	curl_formparse @ 8 ;
-	curl_formfree @ 9 ;
-	curl_getdate @ 10 ;
+	curl_unescape @ 7;
+	curl_formparse @ 8 ;
+	curl_formfree @ 9 ;
+	curl_getdate @ 10 ;
 	curl_getenv @ 11 ;
 	curl_global_cleanup @ 12 ;
-	curl_global_init @ 13 ;
-	curl_slist_append @ 14 ;
-	curl_slist_free_all @ 15 ;
-	curl_version @ 16 ;
-	curl_maprintf @ 17 ;
- 	curl_mfprintf @ 18 ;
-	curl_mprintf @ 19 ;
- 	curl_msprintf @ 20 ;
- 	curl_msnprintf @ 21 ;
- 	curl_mvfprintf @ 22 ;
-	curl_strequal @ 23 ;
-	curl_strnequal @ 24 ;
-        curl_easy_duphandle @ 25 ;
-        curl_formadd @ 26 ;
-
+	curl_global_init @ 13 ;
+	curl_slist_append @ 14 ;
+	curl_slist_free_all @ 15 ;
+	curl_version @ 16 ;
+	curl_maprintf @ 17 ;
+ 	curl_mfprintf @ 18 ;
+	curl_mprintf @ 19 ;
+ 	curl_msprintf @ 20 ;
+ 	curl_msnprintf @ 21 ;
+ 	curl_mvfprintf @ 22 ;
+	curl_strequal @ 23 ;
+	curl_strnequal @ 24 ;
+	curl_easy_duphandle @ 25 ;
+	curl_formadd @ 26 ;
+	curl_multi_init @ 27;
+	curl_multi_add_handle @ 28;
+	curl_multi_remove_handle @ 29;
+	curl_multi_fdset @ 30;
+	curl_multi_perform @ 31;
+	curl_multi_cleanup @ 32;
+	curl_multi_info_read @ 33;
+        curl_free @ 34;

lib/llist.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/llist.h

@@ -1,6 +1,6 @@
 #ifndef __LLIST_H
 #define __LLIST_H
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -9,19 +9,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 #include <stddef.h>

lib/memdebug.c

@@ -1,5 +1,5 @@
 #ifdef MALLOCDEBUG
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -8,19 +8,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/memdebug.h

@@ -1,5 +1,5 @@
 #ifdef MALLOCDEBUG
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -8,19 +8,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 

lib/multi.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"
 #include <stdlib.h>
@@ -29,6 +29,7 @@
 #include "urldata.h"
 #include "transfer.h"
 #include "url.h"
+#include "connect.h"
 
 /* The last #include file should be: */
 #ifdef MALLOCDEBUG
@@ -43,11 +44,13 @@ struct Curl_message {
 
 typedef enum {
   CURLM_STATE_INIT,
-  CURLM_STATE_CONNECT,
-  CURLM_STATE_DO,
-  CURLM_STATE_PERFORM,
-  CURLM_STATE_DONE,
-  CURLM_STATE_COMPLETED,
+  CURLM_STATE_CONNECT,     /* connect has been sent off */
+  CURLM_STATE_WAITCONNECT, /* we're awaiting the connect to finalize */
+  CURLM_STATE_DO,          /* send off the request (part 1) */
+  CURLM_STATE_DO_MORE,     /* send off the request (part 2) */
+  CURLM_STATE_PERFORM,     /* transfer data */
+  CURLM_STATE_DONE,        /* post data transfer operation */
+  CURLM_STATE_COMPLETED,   /* operation complete */
 
   CURLM_STATE_LAST /* not a true state, never use this */
 } CURLMstate;
@@ -224,6 +227,32 @@ CURLMcode curl_multi_fdset(CURLM *multi_handle,
     switch(easy->state) {
     default:
       break;
+    case CURLM_STATE_WAITCONNECT:
+    case CURLM_STATE_DO_MORE:
+      {
+        /* when we're waiting for a connect, we wait for the socket to
+           become writable */
+        struct connectdata *conn = easy->easy_conn;
+        int sockfd;
+
+        if(CURLM_STATE_WAITCONNECT == easy->state) {
+          sockfd = conn->firstsocket;
+          FD_SET(sockfd, write_fd_set);
+        }
+        else {
+          /* When in DO_MORE state, we could be either waiting for us
+             to connect to a remote site, or we could wait for that site
+             to connect to us. It makes a difference in the way: if we
+             connect to the site we wait for the socket to become writable, if 
+             the site connects to us we wait for it to become readable */
+          sockfd = conn->secondarysocket;
+          FD_SET(sockfd, write_fd_set);
+        }
+
+        if(sockfd > *max_fd)
+          *max_fd = sockfd;
+      }
+      break;
     case CURLM_STATE_PERFORM:
       /* This should have a set of file descriptors for us to set.  */
       /* after the transfer is done, go DONE */
@@ -251,6 +280,7 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles)
   bool done;
   CURLMcode result=CURLM_OK;
   struct Curl_message *msg = NULL;
+  bool connected;
 
   *running_handles = 0; /* bump this once for every living handle */
 
@@ -259,14 +289,23 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles)
 
   easy=multi->easy.next;
   while(easy) {
+
+#ifdef MALLOCDEBUG
+    fprintf(stderr, "HANDLE %p: State: %x\n",
+            (char *)easy, easy->state);
+#endif
+
     switch(easy->state) {
     case CURLM_STATE_INIT:
       /* init this transfer. */
       easy->result=Curl_pretransfer(easy->easy_handle);
+
       if(CURLE_OK == easy->result) {
         /* after init, go CONNECT */
         easy->state = CURLM_STATE_CONNECT;
         result = CURLM_CALL_MULTI_PERFORM; 
+        
+        easy->easy_handle->state.used_interface = Curl_if_multi;
       }
       break;
     case CURLM_STATE_CONNECT:
@@ -284,23 +323,83 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles)
       /* Connect. We get a connection identifier filled in. */
       easy->result = Curl_connect(easy->easy_handle, &easy->easy_conn);
 
-      /* after connect, go DO */
+      /* after the connect has been sent off, go WAITCONNECT */
       if(CURLE_OK == easy->result) {
-        easy->state = CURLM_STATE_DO;
+        easy->state = CURLM_STATE_WAITCONNECT;
         result = CURLM_CALL_MULTI_PERFORM; 
       }
       break;
+
+    case CURLM_STATE_WAITCONNECT:
+      {
+        bool connected;
+        easy->result = Curl_is_connected(easy->easy_conn,
+                                         easy->easy_conn->firstsocket,
+                                         &connected);
+        if(connected)
+          easy->result = Curl_protocol_connect(easy->easy_conn, NULL);
+
+        if(CURLE_OK != easy->result) {
+          /* failure detected */
+          Curl_disconnect(easy->easy_conn); /* close the connection */
+          easy->easy_conn = NULL;           /* no more connection */
+          break;
+        }
+
+        if(connected) {
+          /* after the connect has completed, go DO */
+          easy->state = CURLM_STATE_DO;
+          result = CURLM_CALL_MULTI_PERFORM; 
+        }
+      }
+      break;
+
     case CURLM_STATE_DO:
       /* Do the fetch or put request */
       easy->result = Curl_do(&easy->easy_conn);
-      /* after do, go PERFORM */
       if(CURLE_OK == easy->result) {
-        if(CURLE_OK == Curl_readwrite_init(easy->easy_conn)) {
+
+        /* after do, go PERFORM... or DO_MORE */
+        if(easy->easy_conn->do_more) {
+          /* we're supposed to do more, but we need to sit down, relax
+             and wait a little while first */
+          easy->state = CURLM_STATE_DO_MORE;
+          result = CURLM_OK;
+        }
+        else {
+          /* we're done with the DO, now PERFORM */
+          easy->result = Curl_readwrite_init(easy->easy_conn);
+          if(CURLE_OK == easy->result) {
+            easy->state = CURLM_STATE_PERFORM;
+            result = CURLM_CALL_MULTI_PERFORM; 
+          }
+        }
+      }
+      break;
+
+    case CURLM_STATE_DO_MORE:
+      /*
+       * First, check if we really are ready to do more.
+       */
+      easy->result = Curl_is_connected(easy->easy_conn,
+                                       easy->easy_conn->secondarysocket,
+                                       &connected);
+      if(connected) {
+        /*
+         * When we are connected, DO MORE and then go PERFORM
+         */
+        easy->result = Curl_do_more(easy->easy_conn);
+
+        if(CURLE_OK == easy->result)
+          easy->result = Curl_readwrite_init(easy->easy_conn);
+
+        if(CURLE_OK == easy->result) {
           easy->state = CURLM_STATE_PERFORM;
           result = CURLM_CALL_MULTI_PERFORM; 
         }
       }
       break;
+
     case CURLM_STATE_PERFORM:
       /* read/write data if it is ready to do so */
       easy->result = Curl_readwrite(easy->easy_conn, &done);

lib/netrc.c

@@ -1,4 +1,4 @@
-/*****************************************************************************
+/***************************************************************************
  *                                  _   _ ____  _     
  *  Project                     ___| | | |  _ \| |    
  *                             / __| | | | |_) | |    
@@ -7,19 +7,19 @@
  *
  * Copyright (C) 1998 - 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- * In order to be useful for every potential user, curl and libcurl are
- * dual-licensed under the MPL and the MIT/X-derivate licenses.
- *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ * 
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the MPL or the MIT/X-derivate
- * licenses. You may pick one of these licenses.
+ * furnished to do so, under the terms of the COPYING file.
  *
  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  * KIND, either express or implied.
  *
  * $Id$
- *****************************************************************************/
+ ***************************************************************************/
 
 #include "setup.h"