7.10

three more changes
get an argument and add a 'age' field to the struct
2002-10-01 08:57:49 +00:00 · 2002-10-01 08:38:54 +00:00 · 2002-09-30 19:51:05 +00:00 · 2002-09-30 08:07:16 +00:00 · 2002-09-27 09:51:42 +00:00 · 2002-09-27 09:49:40 +00:00
380 changed files with 38497 additions and 17592 deletions
--- a/.cvsignore
+++ b/.cvsignore
@@ -0,0 +1,11 @@
+config.log
+Makefile
+libtool
+Makefile.in
+aclocal.m4
+configure
+config.h
+config.status
+curl-config
+autom4te.cache
+depcomp
--- a/3373
+++ b/3373
--- a/CHANGES.0
+++ b/CHANGES.0
@@ -1,838 +1,3 @@
-Daniel (28 December 1999):
- - Tim Verhoeven correctly identified that curl
-   doesn't support URL formatted file names when getting ftp. Now, there's a
-   problem with getting very weird file names off FTP servers. RFC 959 defines
-   that the file name syntax to use should be the same as in the native OS of
-   the server. Since we don't know the peer server system we currently just
-   translate the URL syntax into plain letters. It is still better and with
-   the solaris 2.6-supplied ftp server it works with spaces in the file names.
-
-Daniel (27 December 1999):
- - When curl parsed cookies straight off a remote site, it corrupted the input
-   data, which, if the downloaded headers were stored made very odd characters
-   in the saved data. Correctly identified and reported by Paul Harrington.
-
-Daniel (13 December 1999):
- - General cleanups in the library interface. There had been some bad kludges
-   added during times of stress and I did my best to clean them off. It was
-   both regarding the lib API as well as include file confusions.
-
-Daniel (3 December 1999):
- - A small --stderr bug was reported by Eetu Ojanen...
-
- - who also brought the suggestion of extending the -X flag to ftp list as
-   well. So, now it is and the long option is now --request instead. It is
-   only for ftp list for now (and the former http stuff too of course).
-
-Lars J. Aas (24 November 1999):
- - Patched curl to compile and build under BeOS. Doesn't work yet though!
-
- - Corrected the Makefile.am files to allow putting object files in
-   different directories than the sources.
-
-Version 6.3.1
-
-Daniel (23 November 1999):
- - I've had this major disk crash. My good old trust-worthy source disk died
-   along with the machine that hosted it. Thank goodness most of all the
-   things I've done are either backed up elsewhere or stored in this CVS
-   server!
-
- - Michael S. Steuer pointed out a bug in the -F handling
-   that made curl hang if you posted an empty variable such as '-F name='. It
-   was one of those old bugs that never have worked properly...
-
- - Jason Baietto pointed out a general flaw in the HTTP
-   download. Curl didn't complain if it was prematurely aborted before the
-   entire download was completed. It does now.
-
-Daniel (19 November 1999):
- - Chris Maltby very accurately criticized the lack of
-   return code checks on the fwrite() calls. I did a thorough check for all
-   occurrences and corrected this.
-
-Daniel (17 November 1999):
- - Paul Harrington pointed out that the -m/--max-time option
-   doesn't work for the slow system calls like gethostbyname()... I don't have
-   any good fix yet, just a slightly less bad one that makes curl exit hard
-   when the timeout is reached.
-
- - Bjorn Reese helped me point out a possible problem that might be the reason
-   why Thomas Hurst experience problems in his Amiga version.
-
- Daniel (12 November 1999):
- - I found a crash in the new cookie file parser. It crashed when you gave
-   a plain http header file as input...
-
-Version 6.3
-
- Daniel (10 November 1999):
- - I kind of found out that the HTTP time-conditional GETs (-z) aren't always
-   respected by the web server and the document is therefore sent in whole
-   again, even though it doesn't match the requested condition. After reading
-   section 13.3.4 of RFC 2616, I think I'm doing the right thing now when I do
-   my own check as well. If curl thinks the condition isn't met, the transfer
-   is aborted prematurely (after all the headers have been received).
-
- - After comments from Robert Linden I also rewrote some parts of the man page
-   to better describe how the -F works.
-
- - Michael Anti put up a new curl download mirror in
-   China:  http://www.pshowing.com/curl/
-
- - I added the list of download mirrors to the README file
-
- - I did add more explanations to the man page
-
- Daniel (8 November 1999):
- - I made the -b/--cookie option capable of reading netscape formatted cookie
-   files as well as normal http-header files. It should be able to
-   transparently figure out what kind of file it got as input.
-
- Daniel (29 October 1999):
- - Another one of Sebastiaan van Erk's ideas (that has been requested before
-   but I seem to have forgotten who it was), is to add support for ranges in
-   FTP downloads. As usual, one request is just a request, when they're two
-   it is a demand. I've added simple support for X-Y style fetches. X has to
-   be the lower number, though you may omit one of the numbers. Use the -r/
-   --range switch (previously HTTP-only).
-
- - Sebastiaan van Erk suggested that curl should be
-   able to show the file size of a specified file. I think this is a splendid
-   idea and the -I flag is now working for FTP. It displays the file size in
-   this manner:
-        Content-Length: XXXX
-   As it resembles normal headers, and leaves us the opportunity to add more
-   info in that display if we can come up with more in the future! It also
-   makes sense since if you access ftp through a HTTP proxy, you'd get the
-   file size the same way.
-
-   I changed the order of the QUOTE command executions. They're now executed
-   just after the login and before any other command. I made this to enable
-   quote commands to run before the -I stuff is done too.
-
- - I found out that -D/--dump-header and -V/--version weren't documented in
-   the man page.
-
- - Many HTTP/1.1 servers do not support ranges. Don't ask me why. I did add
-   some text about this in the man page for the range option. The thread in
-   the mailing list that started this was initiated by Michael Anti.
-
- - I get reports about nroff crashes on solaris 2.6+ when displaying the curl
-   man page. Switch to gnroff instead, it is reported to work(!). Adam Barclay
-   reported and brought the suggestion.
-
- - In a dialogue with Johannes G. Kristinsson we came
-   up with the idea to let -H/--header specified headers replace the
-   internally generated headers, if you happened to select to add a header
-   that curl normally uses by itself. The advantage with this is not entirely
-   obvious, but in Johannes' case it means that he can use another Host: than
-   the one curl would set.
-
- Daniel (27 October 1999):
- - Jongki Suwandi brought a nice patch for (yet another) crash when following
-   a location:. This time you had to follow a https:// server's redirect to
-   get the core.
-
-Version 6.2
-
- Daniel (21 October 1999):
- - I think I managed to remove the suspicious (nil) that has been seen just
-   before the "Host:" in HTTP requests when -v was used.
- - I found out that if you followed a location: when using a proxy, without
-   having specified http:// in the URL, the protocol part was added once again
-   when moving to the next URL! (The protocol part has to be added to the
-   URL when going through a proxy since it has no protocol-guessing system
-   such as curl has.)
- - Benjamin Ritcey reported a core dump under solaris 2.6
-   with OpenSSL 0.9.4. It turned out this was due to a bad free() in main.c
-   that occurred after the download was done and completed.
- - Benjamin found ftp downloads to show the first line of the download meter
-   to get written twice, and I removed that problem. It was introduced with
-   the multiple URL support.
- - Dan Zitter correctly pointed out that curl 6.1 and earlier versions didn't
-   honor RFC 2616 chapter 4 section 2, "Message Headers": "...Field names are
-   case-insensitive..."  HTTP header parsing assumed a certain casing. Dan
-   also provided me with a patch that corrected this, which I took the liberty
-   of editing slightly.
- - Dan Zitter also provided a nice patch for config.guess to better recognize
-   the Mac OS X
- - Dan also corrected a minor problem in the lib/Makefile that caused linking
-   to fail on OS X.
-
- Daniel (19 October 1999):
- - Len Marinaccio came up with some problems with curl.  Since Windows has a
-   crippled shell, it can't redirect stderr and that causes trouble. I added
-   --stderr today which allows the user to redirect the stderr stream to a
-   file or stdout.
-
- Daniel (18 October 1999):
- - The configure script now understands the '--without-ssl' flag, which now
-   totally disable SSL/https support. Previously it wasn't possible to force
-   the configure script to leave SSL alone. The previous functionality has
-   been retained. Troy Engel helped test this new one.
-
-Version 6.1
-
- Daniel (17 October 1999):
- - I ifdef'ed or commented all the zlib stuff in the sources and configure
-   script. It turned out we needed to mock more with zlib than I initially
-   thought, to make it capable of downloading compressed HTTP documents and
-   uncompress them on the fly. I didn't mean the zlib parts of curl to become
-   more than minor so this means I halt the zlib expedition for now and wait
-   until someone either writes the code or zlib gets updated and better
-   adjusted for this kind of usage.  I won't get into details here, but a
-   short a summary is suitable:
-   - zlib can't automatically detect whether to use zlib or gzip
-     decompression methods.
-   - zlib is very neat for reading gzipped files from a file descriptor,
-     although not as nice for reading buffer-based data such as we would
-     want it.
-   - there are still some problems with the win32 version when reading from
-     a file descriptor if that is a socket
-
- Daniel (14 October 1999):
- - Moved the (external) include files for libcurl into a subdirectory named
-   curl and adjusted all #include lines to use <curl/XXXX> to maintain a
-   better name space and control of the headers. This has been requested.
-
- Daniel (12 October 1999):
- - I modified the 'maketgz' script to perform a 'make' too before a release
-   archive is put together in an attempt to make the time stamps better and
-   hopefully avoid the double configure-running that use to occur.
-
- Daniel (11 October 1999):
- - Applied J<>rn's patches that fixes zlib for mingw32 compiles as well as
-   some other missing zlib #ifdef and more text on the multiple URL docs in
-   the man page.
-
-Version 6.1beta
-
- Daniel (6 October 1999):
- - Douglas E. Wegscheid sent me a patch that made the exact same thing as I
-   just made: the -d switch is now capable of reading post data from a named
-   file or stdin.  Use it similarly to the -F. To read the post data from a
-   given file:
-
-        curl -d @path/to/filename www.postsite.com
-
-   or let curl read it out from stdin:
-
-        curl -d @- www.postit.com
-
- J<>rn Hartroth (3 October 1999):
- - Brought some more patches for multiple URL functionality. The MIME
-   separation ideas are almost scrapped now, and a custom separator is being
-   used instead. This is still compile-time "flagged".
-
- Daniel
- - Updated curl.1 with multiple URL info.
-
- Daniel (30 September 1999):
- - Felix von Leitner brought openssl-check fixes for configure.in to work
-   out-of-the-box when the openssl files are installed in the system default
-   dirs.
-
- Daniel (28 September 1999)
- - Added libz functionality. This should enable decompressing gzip, compress
-   or deflate encoding HTTP documents. It also makes curl send an accept that
-   it accepts that kind of encoding. Compressed contents usually shortens
-   download time. I *need* someone to tell me a site that uses compressed HTTP
-   documents so that I can test this out properly.
-
- - As a result of the adding of zlib awareness, I changed the version string
-   a little. I plan to add openldap version reporting in there too.
-
- Daniel (17 September 1999)
- - Made the -F option allow stdin when specifying files. By using '-' instead
-   of file name, the data will be read from stdin.
-
-Version 6.0
-
- Daniel (13 September 1999)
- - Added -X/--http-request <request> to enable any HTTP command to be sent.
-   Do not that your server has to support the exact string you enter. This
-   should possibly a string like DELETE or TRACE.
-
- - Applied Douglas' mingw32-fixes for the makefiles.
-
- Daniel (10 September 1999)
- - Douglas E. Wegscheid pointed out a problem. Curl didn't check the FTP
-   servers return code properly after the --quote commands were issued. It
-   took anything non 200 as an error, when all 2XX codes should be accepted as
-   OK.
-
- - Sending cookies to the same site in multiple lines like curl used to do
-   turned out to be bad and breaking the cookie specs. Curl now sends all
-   cookies on a single Cookie: line. Curl is not yet RFC 2109 compliant, but I
-   doubt that many servers do use that syntax (yet).
-
- Daniel (8 September 1999)
- - J<>rn helped me make sure it still compiles nicely with mingw32 under win32.
-
- Daniel (7 September 1999)
- - FTP upload through proxy is now turned into a HTTP PUT. Requested by
-   Stefan Kanthak.
-
- - Added the ldap files to the .m32 makefile.
-
- Daniel (3 September 1999)
- - Made cookie matching work while using HTTP proxy.
-
- Bjorn Reese (31 August 1999)
- - Passed his ldap:// patch. Note that this requires the openldap shared
-   library to be installed and that LD_LIBRARY_PATH points to the
-   directory where the lib will be found when curl is run with a
-   ldap:// URL.
-
- J<>rn Hartroth (31 August 1999)
- - Made the Mingw32 makefiles into single files.
- - Made file:// work for Win32. The same code is now used for unix as well for
-   performance reasons.
-
- Douglas E. Wegscheid (30 August 1999)
- - Patched the Mingw32 makefiles for SSL builds.
-
- Matthew Clarke (30 August 1999)
- - Made a cool patch for configure.in to allow --with-ssl to specify the
-   root dir of the openssl installation, as in
-
-        ./configure --with-ssl=/usr/ssl_here
-
- - Corrected the 'reconf' script to work better with some shells.
-
- J<>rn Hartroth (26 August 1999)
- - Fixed the Mingw32 makefiles in lib/ and corrected the file.c for win32
-   compiles.
-
-Version 5.11
-
- Daniel (25 August 1999)
- - John Weismiller pointed out a bug in the header-line
-   realloc() system in download.c.
-
- - I added lib/file.[ch] to offer a first, simple, file:// support. It
-   probably won't do much good on win32 system at this point, but I see it
-   as a start.
-
- - Made the release archives get a Makefile in the root dir, which can be
-   used to start the compiling/building process easier. I haven't really
-   changed any INSTALL text yet, I wanted to get some feed-back on this
-   first.
-
- Daniel (17 August 1999)
- - Another Location: bug. Curl didn't do proper relative locations if the
-   original URL had cgi-parameters that contained a slash. Nusu's page
-   again.
-
- - Corrected the NO_PROXY usage. It is a list of substrings that if one of
-   them matches the tail of the host name it should connect to, curl should
-   not use a proxy to connect there. Pointed out to me by Douglas
-   E. Wegscheid.  I also changed the README text a little regarding this.
-
- Daniel (16 August 1999)
- - Fixed a memory bug with http-servers that sent Location: to a Location:
-   page. Nusu's page showed this too.
-
- - Made cookies work a lot better. Setting the same cookie name several times
-   used to add more cookies instead of replacing the former one which it
-   should've. Nusu <nus at intergorj.ro> brought me an URL that made this
-   painfully visible...
-
- Troy (15 August 1999)
- - Brought new .spec files as well as a patch for configure.in that lets the
-   configure script find the openssl files better, even when the include
-   files are in /usr/include/openssl
-
-Version 5.10
-
- Daniel (13 August 1999)
- - SSL_CTX_set_default_passwd_cb() has been modified in the 0.9.4 version of
-   OpenSSL. Now why couldn't they simply add a *new* function instead of
-   modifying the parameters of an already existing function? This way, we get
-   a compiler warning if compiling with 0.9.4 but not with earlier. So, I had
-   to come up with a #if construction that deals with this...
-
- - Made curl output the SSL version number get displayed properly with 0.9.4.
-
- Troy (12 August 1999)
- - Added MingW32 (GCC-2.95) support under Win32. The INSTALL file was also
-   a bit rearranged.
- 
- Daniel (12 August 1999)
- - I had to copy a good <arpa/telnet.h> include file into the curl source
-   tree to enable the silly win32 systems to compile. The distribution rights
-   allows us to do that as long as the file remains unmodified.
-
- - I corrected a few minor things that made the compiler complain when
-   -Wall -pedantic was used.
-
- - I'm moving the official curl web page to http://curl.haxx.nu. I think it
-   will make it easier to remember as it is a lot shorter and less cryptic.
-   The old one still works and shows the same info.
-
- Daniel (11 August 1999)
- - Albert Chin-A-Young mailed me another correction for NROFF in the
-   configure.in that is supposed to be better for IRIX users.
-
- Daniel (10 August 1999)
- - Albert Chin-A-Young helped me with some stupid Makefile things, as well as
-   some fiddling with the getdate.c stuff that he had problems with under
-   HP-UX v10. getdate.y will now be compiled into getdate.c if the appropriate
-   yacc or bison is found by the configure script. Since this is slightly new,
-   we need to test the output getdate.c with win32 systems to make sure it
-   still compiles there.
-
- Daniel (5 August 1999)
- - I've just setup a new mailing list with the intention to keep discussions
-   around libcurl development in it. I mainly expect it to be for thoughts and
-   brainstorming around a "next generation" library, rather than nitpicking
-   about the current implementation or details in the current libcurl.
-
-   To join our happy bunch of future-looking geeks, enter 'subscribe
-   <address>' in the body of a mail and send it to
-   libcurl-request@listserv.fts.frontec.se.  Curl bug reports, the usual curl
-   talk and everything else should still be kept in this mailing list. I've
-   started to archive this mailing list and have put the libcurl web page at
-   www.fts.frontec.se/~dast/libcurl/.
-
- - Stefan Kanthak contacted me regarding a few problems in the configure
-   script which he discovered when trying to make curl compile and build under
-   Siemens SINIX-Z V5.42B2004!
-
- - Marcus Klein very accurately informed me that src/version.h was not present
-   in the CVS repository. Oh, how silly...
-
- - Linus Nielsen rewrote the telnet:// part and now curl offers limited telnet
-   support. If you run curl like 'curl telnet://host' you'll get all output on
-   the screen and curl will read input from stdin. You'll be able to login and
-   run commands etc, but since the output is buffered, expect to get a little
-   weird output.
-
-   This is still in its infancy and it might get changed. We need your
-   feed-back and input in how this is best done.
-
-   WIN32 NOTE: I bet we'll get problems when trying to compile the current
-   lib/telnet.c on win32, but I think we can sort them out in time.
-
- - David Sanderson reported that FORCE_ALLOCA_H or HAVE_ALLOCA_H must be
-   defined for getdate.c to compile properly on HP-UX 11.0. I updated the
-   configure script to check for alloca.h which should make it.
-
- Daniel (4 August 1999)
- - I finally got to understand Marcus Klein's ftp download resume problem,
-   which turns out to be due to different outputs from different ftp
-   servers. It makes ftp download resuming a little trickier, but I've made
-   some modifications I really believe will work for most ftp servers and I do
-   hope you report if you have problems with this!
-
- - Added text about file transfer resuming to README.curl.
-
- Daniel (2 August 1999)
- - Applied a progress-bar patch from Lars J. Aas. It offers
-   a new styled progress bar enabled with -#/--progress-bar. 
-
- T. Yamada <tai at imasy.or.jp> (30 July 1999)
- - It breaks with segfault when 1) curl is using .netrc to obtain
-   username/password (option '-n'), and 2) is automatically redirected to
-   another location (option '-L').
-
-   There is a small bug in lib/url.c (block starting from line 641), which
-   tries to take out username/password from user- supplied command-line
-   argument ('-u' option). This block is never executed on first attempt since
-   CONF_USERPWD bit isn't set at first, but curl later turns it on when it
-   checks for CONF_NETRC bit. So when curl tries to redo everything due to
-   redirection, it segfaults trying to access *data->userpwd.
-
-Version 5.9.1
-
- Daniel (30 July 1999)
- - Steve Walch pointed out that there is a memory leak in the formdata
-   functions. I added a FormFree() function that is now used and supposed to
-   correct this flaw.
-
- - Mark Wotton reported:
-   'curl -L https://www.cwa.com.au/' core dumps.  I managed to cure this by
-   correcting the cleanup procedure. The bug seems to be gone with my OpenSSL
-   0.9.2b, although still occurs when I run the ~100 years old SSLeay 0.8.0. I
-   don't know whether it is curl or SSLeay that is to blame for that.
-
- - Marcus Klein:
-   Reported an FTP upload resume bug that I really can't repeat nor understand.
-   I leave it here so that it won't be forgotten.
-
- Daniel (29 July 1999)
- - Costya Shulyupin suggested support for longer URLs when following Location:
-   and I could only agree and fix it!
-
- - Leigh Purdie found a problem in the upload/POST department. It turned out
-   that http.c accidentaly cleared the pointer instead of the byte counter
-   when supposed to.
-
- - Costya Shulyupin pointed out a problem with port numbers and Location:. If
-   you had a server at a non-standard port that redirected to an URL using a
-   standard port number, curl still used that first port number.
-
- - Ralph Beckmann pointed out a problem when using both CONF_FOLLOWLOCATION
-   and CONF_FAILONERROR simultaneously. Since the CONF_FAILONERROR exits on
-   the 302-code that the follow location header outputs it will never show any
-   html on location: pages. I have now made it look for >=400 codes if
-   CONF_FOLLOWLOCATION is set.
-
- - 'struct slist' is now renamed to 'struct curl_slist' (as suggested by Ralph
-   Beckmann).
-
- - Joshua Swink and Rick Welykochy were the first to point out to me that the
-   latest OpenSSL package now have moved the standard include path. It is now
-   in /usr/local/ssl/include/openssl and I have now modified the --enable-ssl
-   option for the configure script to use that as the primary path, and I
-   leave the former path too to work with older packages of OpenSSL too.
-
- Daniel (9 June 1999)
- - I finally understood the IRIX problem and now it seem to compile on it!
-   I am gonna remove those #define strcasecmp() things once and for all now.
-
- Daniel (4 June 1999)
- - I adjusted the FTP reply 227 parser to make the PASV command work better
-   with more ftp servers. Appearantly the Roxen Challanger server replied
-   something curl 5.9 could deal with! :-( Reported by Ashley Reid-Montanaro
-   and Mark Butler brought a solution for it.
-
- Daniel (26 May 1999)
- - Rearranged. README is new, the old one is now README.curl and I added a
-   README.libcurl with text I got from Ralph Beckmann.
-
- - I also updated the INSTALL text.
-
- Daniel (25 May 1999)
- - David Jonathan Lowsky correctly pointed out that curl didn't properly deal
-   with form posting where the variable shouldn't have any content, as in curl
-   -F "form=" www.site.com. It was now fixed.
-
-Version 5.9
-
- Daniel (22 May 1999)
- - I've got a bug report from Aaron Scarisbrick in which he states he has some
-   problems with -L under FreeBSD 3.0. I have previously got another bug
-   report from Stefan Grether which points at an error with similar sympthoms
-   when using win32. I made the allocation of the new url string a bit faster
-   and different, don't know if it actually improves anything though...
-
- Daniel (20 May 1999)
- - Made the cookie parser deal with CRLF newlines too.
-
- Daniel (19 May 1999)
- - Download() didn't properly deal with failing return codes from the sread()
-   function. Adam Coyne found the problem in the win32 version, and Troy Engel
-   helped me out isolating it.
-
- Daniel (16 May 1999)
- - Richard Adams pointed out a bug I introduced in 5.8. --dump-header doesn't
-   work anymore! :-/ I fixed it now.
-
- - After a suggestion by Joshua Swink I added -S / --show-error to force curl
-   to display the error message in case of an error, even if -s/--silent was
-   used.
-
- Daniel (10 May 1999)
- - I moved the stuff concerning HTTP, DICT and TELNET it their own source
-   files now. It is a beginning on my clean-up of the sources to make them
-   layer all those protocols better to enable more to be added easier in the
-   future!
-
- - Leon Breedt sent me some files I've not put into the main curl
-   archive. They're for creating the Debian package thingie. He also sent me a
-   debian package that I've made available for download at the web page
-
- Daniel (9 May 1999)
- - Made it compile on cygwin too.
-
- Troy Engel (7 May 1999)
- - Brought a series of patches to allow curl to compile smoothly on MSVC++ 6
-   again!
-
- Daniel (6 May 1999)
- - I changed the #ifdef HAVE_STRFTIME placement for the -z code so that it
-   will be easier to discover systems that don't have that function and thus
-   can't use -z successfully. Made the strftime() get used if WIN32 is defined
-   too.
-
-Version 5.8
-
- Daniel (5 May 1999)
- - I've had it with this autoconf/automake mess. It seems to work allright
-   for most people who don't have automake installed, but for those who have
-   there are problems all over.
-
-   I've got like five different bug reports on this only the last
-   week... Claudio Neves and Federico Bianchi and root <duggerj001 at
-   hawaii.rr.com> are some of them reporting this.
-
-   Currently, I have no really good fix since I want to use automake myself to
-   generate the Makefile.in files. I've found out that the @SHELL@-problems
-   can often be fixed by manually invoking 'automake' in the archive root
-   before you run ./configure... I've hacked my maketgz script now to fiddle
-   a bit with this and my tests seem to work better than before at least!
-
- Daniel (4 May 1999)
- - mkhelp.pl has been doing badly lately. I corrected a case problem in
-   the regexes.
-
- - I've now remade the -o option to not touch the file unless it needs to.
-   I had to do this to make -z option really fine, since now you can make a
-   curl fetch and use a local copy's time when downloading to that file, as
-   in:
-
-        curl -z dump -o dump remote.site.com/file.html
-
-   This will only get the file if the remote one is newer than the local.
-   I'm aware that this alters previous behaviour a little. Some scripts out
-   there may depend on that the file is always touched...
-
- - Corrected a bug in the SSLv2/v3 selection.
-
- - Felix von Leitner requested that curl should be able to send
-   "If-Modified-Since" headers, which indeed is a fair idea.  I implemented it
-   right away! Try -z <expression> where expression is a full GNU date
-   expression or a file name to get the date from!
-
- Stephan Lagerholm (30 Apr 1999)
- - Pointed out a problem with the src/Makefile for FreeBSD. The RM variable
-   isn't set and causes the make to fail.
-
- Daniel (26 April 1999)
- - Am I silly or what? Irving Wolfe pointed out to me that the curl version
-   number was not set properly. Hasn't been since 5.6. This was due to a bug
-   in my maketgz script!
-
- David Eriksson (25 Apr 1999)
- - Found a bug in cookies.c that made it crash at times.
-
-Version 5.7.1
-
- Doug Kaufman (23 Apr 1999)
- - Brought two sunos 4 fixes. One of them being the hostip.c fix mentioned
-   below and the other one a correction in include/stdcheaders.h
-
- - Added a paragraph about compiling with the US-version of openssl to the
-   INSTALL file.
-
- Daniel
- - New mailing list address. Info updated on the web page as well as in the
-   README file
-
- Greg Onufer (20 Apr 1999)
- - hostip.c didn't compile properly on SunOS 5.5.1.
-   It needs an #include <sys/types.h>
-
-Version 5.7
-
- Daniel (Apr 20 1999)
- - Decided to upload a non-beta version right now!
-
- - Made curl support any-length HTTP headers. The destination buffer is now
-   simply enlarged every time it turns out to be too small!
-
- - Added the FAQ file to the archive. Still a bit smallish, but it is a
-   start.
-
- Eric Thelin (15 Apr 1999)
- - Made -D accept '-' instead of filename to write to stdout.
-
-Version 5.6.3beta
-
- Daniel (Apr 12 1999)
-
- - Changed two #ifdef WIN32 to better #ifdef <errorcode> when connect()ing
-   in url.c and ftp.c. Makes cygwin32 deal with them better too. We should
-   try to get some decent win32-replacement there. Anyone?
-
- - The old -3/--crlf option is now ONLY --crlf!
-
- - I changed the "SSL fix" to a more lame one, but that doesn't remove as
-   much functionality. Now I've enabled the lib to select what SSL version it
-   should try first. Appearantly some older SSL-servers don't like when you
-   talk v3 with them so you need to be able to force curl to talk v2 from the
-   start. The fix dated April 6 and posted on the mailing list forced curl to
-   use v2 at all times using a modern OpenSSL version, but we don't really
-   want such a crippled solution.
- 
- - Marc Boucher sent me a patch that corrected a math error for the
-   "Curr.Speed" progress meter.
-
- - Eric Thelin sent me a patch that enables '-K -' to read a config file from
-   stdin.
-
- - I found out we didn't close the file properly before so I added it!
-
- Daniel (Apr 9 1999)
- - Yu Xin pointed out a problem with ftp download resume.  It didn't work at
-   all! ;-O
-
- Daniel (Apr 6 1999)
- - Corrected the version string part generated for the SSL version.
-
- - I found a way to make some other SSL page work with openssl 0.9.1+ that
-   previously didn't (ssleay 0.8.0 works with it though!). Trying to get
-   some real info from the OpenSSL guys to see how I should do to behave the
-   best way. SSLeay 0.8.0 shouldn't be that much in use anyway these days!
-
-Version 5.6.2beta
-
- Daniel (Apr 4 1999)
- - Finally have curl more cookie "aware". Now read carefully. This is how
-   it works.
-   To make curl read cookies from an already existing file, in plain header-
-   format (like from the headers of a previous fetch) invoke curl with the
-   -b flag like:
-
-        curl -b file http://site/foo.html
-
-   Curl will then use all cookies it finds matching. The old style that sets
-   a single cookie with -b is still supported and is used if the string
-   following -b includes a '=' letter, as in "-b name=daniel".
-
-   To make curl read the cookies sent in combination with a location: (which
-   sites often do) point curl to read a non-existing file at first (i.e
-   to start with no existing cookies), like:
-
-        curl -b nowhere http://site/setcookieandrelocate.html
-
- - Added a paragraph in the TODO file about the SSL problems recently
-   reported. Evidently, some kind of SSL-problem curl may need to address.
-
- - Better "Location:" following.
-
- Douglas E. Wegscheid (Tue, 30 Mar 1999)
- - A subsecond display patch.
-
- Daniel (Mar 14 1999)
- - I've separated the version number of libcurl and curl now. To make
-   things a little easier, I decided to start the curl numbering from
-   5.6 and the former version number known as "curl" is now the one
-   set for libcurl.
-
- - Removed the 'enable-no-pass' from configure, I doubt anyone wanted
-   that.
-
- - Made lots of tiny adjustments to compile smoothly with cygwin under
-   win32. It's a killer for porting this to win32, bye bye VC++! ;-)
-   Compiles and builds out-of-the-box now. See the new wordings in
-   INSTALL for details.
-
- - Beginning experiments with downloading multiple document from a http
-   server while remaining connected.
-
-Version 5.6beta
-
- Daniel (Mar 13 1999)
- - Since I've changed so much, I thought I'd just go ahead and implement the
-   suggestion from Douglas E. Wegscheid. -D or --dump-header is now storing
-   HTTP headers separately in the specified file.
-
- - Added new text to INSTALL on what to do to build this on win32 now.
-
- - Aaargh. I had to take a step back and prefix the shared #include files
-   in the sources with "../include/" to please VC++...
-
- Daniel (Mar 12 1999)
- - Split the url.c source into many tiny sources for better readability
-   and smaller size.
-
- Daniel (Mar 11 1999)
- - Started to change stuff for a move to make libcurl and a more separate
-   curl application that uses the libcurl. Made the libcurl sources into
-   the new lib directory while the curl application will remain in src as
-   before. New makefiles, adjusted configure script and so.
-
-   libcurl.a built quickly and easily. I better make a better interface to
-   the lib functions though.
-
-   The new root dir include/ is supposed to contain the public information
-   about the new libcurl. It is a little ugly so far :-)
-
-
- Daniel (Mar 1 1999)
- - Todd Kaufmann sent me a good link to Netscape's cookie spec as well as the
-   info that RFC 2109 specifies how to use them.  The link is now in the
-   README and the RFC in the RESOURCES.
-
- Daniel (Feb 23 1999)
- - Finally made configure accept --with-ssl to look for SSL libs and includes
-   in the "standard" place /usr/local/ssl...
-
- Daniel (Feb 22 1999)
- - Verified that curl linked fine with OpenSSL 0.9.1c which seems to be
-   the most recent.
-
- Henri Gomez (Fri Feb  5 1999)
- - Sent in an updated curl-ssl.spec. I still miss the script that builds an
-   RPM automatically...
-
-Version 5.5.1
-
- Mark Butler (27 Jan 1999)
- - Corrected problems in Download().
-
- Danitel Stenberg (25 Jan 1999)
- - Jeremie Petit pointed out a few flaws in the source that prevented it from
-   compile warning free with the native compiler under Digital Unix v4.0d.
-
-Version 5.5
-
- Daniel Stenberg (15 Jan 1999)
- - Added Bjorns small text to the README about the DICT protocol.
-
- Daniel Stenberg (11 Jan 1999)
- - <jswink at softcom.net> reported about the win32-versioin: "Doesn't use
-   ALL_PROXY environment variable". Turned out to be because of the static-
-   buffer nature of the win32 environment variable calls!
-
- Bjorn Reese (10 Jan 1999)
- - I have attached a simple addition for the DICT protocol (RFC 2229).
-   It performs dictionary lookups. The output still needs to be better
-   formatted.
-
-   To test it try (the exact format, and more examples are described in
-   the RFC)
-
-        dict://dict.org/m:hello
-        dict://dict.org/m:hello::soundex
-
-
- Vicente Garcia (10 Jan 1999)
- - Corrected the progress meter for files larger than 20MB.
-
- Daniel Stenberg (7 Jan 1999)
- - Corrected the -t and -T help texts. They claimed to be FTP only.
-
-Version 5.4
-
- Daniel Stenberg
- (7 Jan 1999)
- - Irving Wolfe reported that curl -s didn't always supress the progress
-   reporting. It was the form post that autoamtically always switched it on
-   again. This is now corrected!
-
- (4 Jan 1999)
- - Andreas Kostyrka suggested I'd add PUT and he helped me out to test it. If
-   you use -t or -T now on a http or https server, PUT will be used for file
-   upload.
-
-   I removed the former use of -T with HTTP. I doubt anyone ever really used
-   that.
-
- (4 Jan 1999)
- - Erik Jacobsen found a width bug in the mprintf() function.  I corrected it
-   now.
-
- (4 Jan 1999)
- - As John V. Chow pointed out to me, curl accepted very limited URL sizes. It
-   should now accept path parts that are up to at least 4096 bytes.
-
- - Somehow I screwed up when applying the AIX fix from Gilbert Ramirez, so
-   I redid that now.
-
 Version 5.3a (win32 only)

 Troy Engel
--- a/CHANGES.1999
+++ b/CHANGES.1999
@@ -0,0 +1,835 @@
+Daniel (28 December 1999):
+ - Tim Verhoeven correctly identified that curl
+   doesn't support URL formatted file names when getting ftp. Now, there's a
+   problem with getting very weird file names off FTP servers. RFC 959 defines
+   that the file name syntax to use should be the same as in the native OS of
+   the server. Since we don't know the peer server system we currently just
+   translate the URL syntax into plain letters. It is still better and with
+   the solaris 2.6-supplied ftp server it works with spaces in the file names.
+
+Daniel (27 December 1999):
+ - When curl parsed cookies straight off a remote site, it corrupted the input
+   data, which, if the downloaded headers were stored made very odd characters
+   in the saved data. Correctly identified and reported by Paul Harrington.
+
+Daniel (13 December 1999):
+ - General cleanups in the library interface. There had been some bad kludges
+   added during times of stress and I did my best to clean them off. It was
+   both regarding the lib API as well as include file confusions.
+
+Daniel (3 December 1999):
+ - A small --stderr bug was reported by Eetu Ojanen...
+
+ - who also brought the suggestion of extending the -X flag to ftp list as
+   well. So, now it is and the long option is now --request instead. It is
+   only for ftp list for now (and the former http stuff too of course).
+
+Lars J. Aas (24 November 1999):
+ - Patched curl to compile and build under BeOS. Doesn't work yet though!
+
+ - Corrected the Makefile.am files to allow putting object files in
+   different directories than the sources.
+
+Version 6.3.1
+
+Daniel (23 November 1999):
+ - I've had this major disk crash. My good old trust-worthy source disk died
+   along with the machine that hosted it. Thank goodness most of all the
+   things I've done are either backed up elsewhere or stored in this CVS
+   server!
+
+ - Michael S. Steuer pointed out a bug in the -F handling
+   that made curl hang if you posted an empty variable such as '-F name='. It
+   was one of those old bugs that never have worked properly...
+
+ - Jason Baietto pointed out a general flaw in the HTTP
+   download. Curl didn't complain if it was prematurely aborted before the
+   entire download was completed. It does now.
+
+Daniel (19 November 1999):
+ - Chris Maltby very accurately criticized the lack of
+   return code checks on the fwrite() calls. I did a thorough check for all
+   occurrences and corrected this.
+
+Daniel (17 November 1999):
+ - Paul Harrington pointed out that the -m/--max-time option
+   doesn't work for the slow system calls like gethostbyname()... I don't have
+   any good fix yet, just a slightly less bad one that makes curl exit hard
+   when the timeout is reached.
+
+ - Bjorn Reese helped me point out a possible problem that might be the reason
+   why Thomas Hurst experience problems in his Amiga version.
+
+ Daniel (12 November 1999):
+ - I found a crash in the new cookie file parser. It crashed when you gave
+   a plain http header file as input...
+
+Version 6.3
+
+ Daniel (10 November 1999):
+ - I kind of found out that the HTTP time-conditional GETs (-z) aren't always
+   respected by the web server and the document is therefore sent in whole
+   again, even though it doesn't match the requested condition. After reading
+   section 13.3.4 of RFC 2616, I think I'm doing the right thing now when I do
+   my own check as well. If curl thinks the condition isn't met, the transfer
+   is aborted prematurely (after all the headers have been received).
+
+ - After comments from Robert Linden I also rewrote some parts of the man page
+   to better describe how the -F works.
+
+ - Michael Anti put up a new curl download mirror in
+   China:  http://www.pshowing.com/curl/
+
+ - I added the list of download mirrors to the README file
+
+ - I did add more explanations to the man page
+
+ Daniel (8 November 1999):
+ - I made the -b/--cookie option capable of reading netscape formatted cookie
+   files as well as normal http-header files. It should be able to
+   transparently figure out what kind of file it got as input.
+
+ Daniel (29 October 1999):
+ - Another one of Sebastiaan van Erk's ideas (that has been requested before
+   but I seem to have forgotten who it was), is to add support for ranges in
+   FTP downloads. As usual, one request is just a request, when they're two
+   it is a demand. I've added simple support for X-Y style fetches. X has to
+   be the lower number, though you may omit one of the numbers. Use the -r/
+   --range switch (previously HTTP-only).
+
+ - Sebastiaan van Erk suggested that curl should be
+   able to show the file size of a specified file. I think this is a splendid
+   idea and the -I flag is now working for FTP. It displays the file size in
+   this manner:
+        Content-Length: XXXX
+   As it resembles normal headers, and leaves us the opportunity to add more
+   info in that display if we can come up with more in the future! It also
+   makes sense since if you access ftp through a HTTP proxy, you'd get the
+   file size the same way.
+
+   I changed the order of the QUOTE command executions. They're now executed
+   just after the login and before any other command. I made this to enable
+   quote commands to run before the -I stuff is done too.
+
+ - I found out that -D/--dump-header and -V/--version weren't documented in
+   the man page.
+
+ - Many HTTP/1.1 servers do not support ranges. Don't ask me why. I did add
+   some text about this in the man page for the range option. The thread in
+   the mailing list that started this was initiated by Michael Anti.
+
+ - I get reports about nroff crashes on solaris 2.6+ when displaying the curl
+   man page. Switch to gnroff instead, it is reported to work(!). Adam Barclay
+   reported and brought the suggestion.
+
+ - In a dialogue with Johannes G. Kristinsson we came
+   up with the idea to let -H/--header specified headers replace the
+   internally generated headers, if you happened to select to add a header
+   that curl normally uses by itself. The advantage with this is not entirely
+   obvious, but in Johannes' case it means that he can use another Host: than
+   the one curl would set.
+
+ Daniel (27 October 1999):
+ - Jongki Suwandi brought a nice patch for (yet another) crash when following
+   a location:. This time you had to follow a https:// server's redirect to
+   get the core.
+
+Version 6.2
+
+ Daniel (21 October 1999):
+ - I think I managed to remove the suspicious (nil) that has been seen just
+   before the "Host:" in HTTP requests when -v was used.
+ - I found out that if you followed a location: when using a proxy, without
+   having specified http:// in the URL, the protocol part was added once again
+   when moving to the next URL! (The protocol part has to be added to the
+   URL when going through a proxy since it has no protocol-guessing system
+   such as curl has.)
+ - Benjamin Ritcey reported a core dump under solaris 2.6
+   with OpenSSL 0.9.4. It turned out this was due to a bad free() in main.c
+   that occurred after the download was done and completed.
+ - Benjamin found ftp downloads to show the first line of the download meter
+   to get written twice, and I removed that problem. It was introduced with
+   the multiple URL support.
+ - Dan Zitter correctly pointed out that curl 6.1 and earlier versions didn't
+   honor RFC 2616 chapter 4 section 2, "Message Headers": "...Field names are
+   case-insensitive..."  HTTP header parsing assumed a certain casing. Dan
+   also provided me with a patch that corrected this, which I took the liberty
+   of editing slightly.
+ - Dan Zitter also provided a nice patch for config.guess to better recognize
+   the Mac OS X
+ - Dan also corrected a minor problem in the lib/Makefile that caused linking
+   to fail on OS X.
+
+ Daniel (19 October 1999):
+ - Len Marinaccio came up with some problems with curl.  Since Windows has a
+   crippled shell, it can't redirect stderr and that causes trouble. I added
+   --stderr today which allows the user to redirect the stderr stream to a
+   file or stdout.
+
+ Daniel (18 October 1999):
+ - The configure script now understands the '--without-ssl' flag, which now
+   totally disable SSL/https support. Previously it wasn't possible to force
+   the configure script to leave SSL alone. The previous functionality has
+   been retained. Troy Engel helped test this new one.
+
+Version 6.1
+
+ Daniel (17 October 1999):
+ - I ifdef'ed or commented all the zlib stuff in the sources and configure
+   script. It turned out we needed to mock more with zlib than I initially
+   thought, to make it capable of downloading compressed HTTP documents and
+   uncompress them on the fly. I didn't mean the zlib parts of curl to become
+   more than minor so this means I halt the zlib expedition for now and wait
+   until someone either writes the code or zlib gets updated and better
+   adjusted for this kind of usage.  I won't get into details here, but a
+   short a summary is suitable:
+   - zlib can't automatically detect whether to use zlib or gzip
+     decompression methods.
+   - zlib is very neat for reading gzipped files from a file descriptor,
+     although not as nice for reading buffer-based data such as we would
+     want it.
+   - there are still some problems with the win32 version when reading from
+     a file descriptor if that is a socket
+
+ Daniel (14 October 1999):
+ - Moved the (external) include files for libcurl into a subdirectory named
+   curl and adjusted all #include lines to use <curl/XXXX> to maintain a
+   better name space and control of the headers. This has been requested.
+
+ Daniel (12 October 1999):
+ - I modified the 'maketgz' script to perform a 'make' too before a release
+   archive is put together in an attempt to make the time stamps better and
+   hopefully avoid the double configure-running that use to occur.
+
+ Daniel (11 October 1999):
+ - Applied J<>rn's patches that fixes zlib for mingw32 compiles as well as
+   some other missing zlib #ifdef and more text on the multiple URL docs in
+   the man page.
+
+Version 6.1beta
+
+ Daniel (6 October 1999):
+ - Douglas E. Wegscheid sent me a patch that made the exact same thing as I
+   just made: the -d switch is now capable of reading post data from a named
+   file or stdin.  Use it similarly to the -F. To read the post data from a
+   given file:
+
+        curl -d @path/to/filename www.postsite.com
+
+   or let curl read it out from stdin:
+
+        curl -d @- www.postit.com
+
+ J<>rn Hartroth (3 October 1999):
+ - Brought some more patches for multiple URL functionality. The MIME
+   separation ideas are almost scrapped now, and a custom separator is being
+   used instead. This is still compile-time "flagged".
+
+ Daniel
+ - Updated curl.1 with multiple URL info.
+
+ Daniel (30 September 1999):
+ - Felix von Leitner brought openssl-check fixes for configure.in to work
+   out-of-the-box when the openssl files are installed in the system default
+   dirs.
+
+ Daniel (28 September 1999)
+ - Added libz functionality. This should enable decompressing gzip, compress
+   or deflate encoding HTTP documents. It also makes curl send an accept that
+   it accepts that kind of encoding. Compressed contents usually shortens
+   download time. I *need* someone to tell me a site that uses compressed HTTP
+   documents so that I can test this out properly.
+
+ - As a result of the adding of zlib awareness, I changed the version string
+   a little. I plan to add openldap version reporting in there too.
+
+ Daniel (17 September 1999)
+ - Made the -F option allow stdin when specifying files. By using '-' instead
+   of file name, the data will be read from stdin.
+
+Version 6.0
+
+ Daniel (13 September 1999)
+ - Added -X/--http-request <request> to enable any HTTP command to be sent.
+   Do not that your server has to support the exact string you enter. This
+   should possibly a string like DELETE or TRACE.
+
+ - Applied Douglas' mingw32-fixes for the makefiles.
+
+ Daniel (10 September 1999)
+ - Douglas E. Wegscheid pointed out a problem. Curl didn't check the FTP
+   servers return code properly after the --quote commands were issued. It
+   took anything non 200 as an error, when all 2XX codes should be accepted as
+   OK.
+
+ - Sending cookies to the same site in multiple lines like curl used to do
+   turned out to be bad and breaking the cookie specs. Curl now sends all
+   cookies on a single Cookie: line. Curl is not yet RFC 2109 compliant, but I
+   doubt that many servers do use that syntax (yet).
+
+ Daniel (8 September 1999)
+ - J<>rn helped me make sure it still compiles nicely with mingw32 under win32.
+
+ Daniel (7 September 1999)
+ - FTP upload through proxy is now turned into a HTTP PUT. Requested by
+   Stefan Kanthak.
+
+ - Added the ldap files to the .m32 makefile.
+
+ Daniel (3 September 1999)
+ - Made cookie matching work while using HTTP proxy.
+
+ Bjorn Reese (31 August 1999)
+ - Passed his ldap:// patch. Note that this requires the openldap shared
+   library to be installed and that LD_LIBRARY_PATH points to the
+   directory where the lib will be found when curl is run with a
+   ldap:// URL.
+
+ J<>rn Hartroth (31 August 1999)
+ - Made the Mingw32 makefiles into single files.
+ - Made file:// work for Win32. The same code is now used for unix as well for
+   performance reasons.
+
+ Douglas E. Wegscheid (30 August 1999)
+ - Patched the Mingw32 makefiles for SSL builds.
+
+ Matthew Clarke (30 August 1999)
+ - Made a cool patch for configure.in to allow --with-ssl to specify the
+   root dir of the openssl installation, as in
+
+        ./configure --with-ssl=/usr/ssl_here
+
+ - Corrected the 'reconf' script to work better with some shells.
+
+ J<>rn Hartroth (26 August 1999)
+ - Fixed the Mingw32 makefiles in lib/ and corrected the file.c for win32
+   compiles.
+
+Version 5.11
+
+ Daniel (25 August 1999)
+ - John Weismiller pointed out a bug in the header-line
+   realloc() system in download.c.
+
+ - I added lib/file.[ch] to offer a first, simple, file:// support. It
+   probably won't do much good on win32 system at this point, but I see it
+   as a start.
+
+ - Made the release archives get a Makefile in the root dir, which can be
+   used to start the compiling/building process easier. I haven't really
+   changed any INSTALL text yet, I wanted to get some feed-back on this
+   first.
+
+ Daniel (17 August 1999)
+ - Another Location: bug. Curl didn't do proper relative locations if the
+   original URL had cgi-parameters that contained a slash. Nusu's page
+   again.
+
+ - Corrected the NO_PROXY usage. It is a list of substrings that if one of
+   them matches the tail of the host name it should connect to, curl should
+   not use a proxy to connect there. Pointed out to me by Douglas
+   E. Wegscheid.  I also changed the README text a little regarding this.
+
+ Daniel (16 August 1999)
+ - Fixed a memory bug with http-servers that sent Location: to a Location:
+   page. Nusu's page showed this too.
+
+ - Made cookies work a lot better. Setting the same cookie name several times
+   used to add more cookies instead of replacing the former one which it
+   should've. Nusu <nus at intergorj.ro> brought me an URL that made this
+   painfully visible...
+
+ Troy (15 August 1999)
+ - Brought new .spec files as well as a patch for configure.in that lets the
+   configure script find the openssl files better, even when the include
+   files are in /usr/include/openssl
+
+Version 5.10
+
+ Daniel (13 August 1999)
+ - SSL_CTX_set_default_passwd_cb() has been modified in the 0.9.4 version of
+   OpenSSL. Now why couldn't they simply add a *new* function instead of
+   modifying the parameters of an already existing function? This way, we get
+   a compiler warning if compiling with 0.9.4 but not with earlier. So, I had
+   to come up with a #if construction that deals with this...
+
+ - Made curl output the SSL version number get displayed properly with 0.9.4.
+
+ Troy (12 August 1999)
+ - Added MingW32 (GCC-2.95) support under Win32. The INSTALL file was also
+   a bit rearranged.
+ 
+ Daniel (12 August 1999)
+ - I had to copy a good <arpa/telnet.h> include file into the curl source
+   tree to enable the silly win32 systems to compile. The distribution rights
+   allows us to do that as long as the file remains unmodified.
+
+ - I corrected a few minor things that made the compiler complain when
+   -Wall -pedantic was used.
+
+ - I'm moving the official curl web page to http://curl.haxx.nu. I think it
+   will make it easier to remember as it is a lot shorter and less cryptic.
+   The old one still works and shows the same info.
+
+ Daniel (11 August 1999)
+ - Albert Chin-A-Young mailed me another correction for NROFF in the
+   configure.in that is supposed to be better for IRIX users.
+
+ Daniel (10 August 1999)
+ - Albert Chin-A-Young helped me with some stupid Makefile things, as well as
+   some fiddling with the getdate.c stuff that he had problems with under
+   HP-UX v10. getdate.y will now be compiled into getdate.c if the appropriate
+   yacc or bison is found by the configure script. Since this is slightly new,
+   we need to test the output getdate.c with win32 systems to make sure it
+   still compiles there.
+
+ Daniel (5 August 1999)
+ - I've just setup a new mailing list with the intention to keep discussions
+   around libcurl development in it. I mainly expect it to be for thoughts and
+   brainstorming around a "next generation" library, rather than nitpicking
+   about the current implementation or details in the current libcurl.
+
+   To join our happy bunch of future-looking geeks, enter 'subscribe
+   <address>' in the body of a mail and send it to
+   libcurl-request@listserv.fts.frontec.se.  Curl bug reports, the usual curl
+   talk and everything else should still be kept in this mailing list. I've
+   started to archive this mailing list and have put the libcurl web page at
+   www.fts.frontec.se/~dast/libcurl/.
+
+ - Stefan Kanthak contacted me regarding a few problems in the configure
+   script which he discovered when trying to make curl compile and build under
+   Siemens SINIX-Z V5.42B2004!
+
+ - Marcus Klein very accurately informed me that src/version.h was not present
+   in the CVS repository. Oh, how silly...
+
+ - Linus Nielsen rewrote the telnet:// part and now curl offers limited telnet
+   support. If you run curl like 'curl telnet://host' you'll get all output on
+   the screen and curl will read input from stdin. You'll be able to login and
+   run commands etc, but since the output is buffered, expect to get a little
+   weird output.
+
+   This is still in its infancy and it might get changed. We need your
+   feed-back and input in how this is best done.
+
+   WIN32 NOTE: I bet we'll get problems when trying to compile the current
+   lib/telnet.c on win32, but I think we can sort them out in time.
+
+ - David Sanderson reported that FORCE_ALLOCA_H or HAVE_ALLOCA_H must be
+   defined for getdate.c to compile properly on HP-UX 11.0. I updated the
+   configure script to check for alloca.h which should make it.
+
+ Daniel (4 August 1999)
+ - I finally got to understand Marcus Klein's ftp download resume problem,
+   which turns out to be due to different outputs from different ftp
+   servers. It makes ftp download resuming a little trickier, but I've made
+   some modifications I really believe will work for most ftp servers and I do
+   hope you report if you have problems with this!
+
+ - Added text about file transfer resuming to README.curl.
+
+ Daniel (2 August 1999)
+ - Applied a progress-bar patch from Lars J. Aas. It offers
+   a new styled progress bar enabled with -#/--progress-bar. 
+
+ T. Yamada <tai at imasy.or.jp> (30 July 1999)
+ - It breaks with segfault when 1) curl is using .netrc to obtain
+   username/password (option '-n'), and 2) is automatically redirected to
+   another location (option '-L').
+
+   There is a small bug in lib/url.c (block starting from line 641), which
+   tries to take out username/password from user- supplied command-line
+   argument ('-u' option). This block is never executed on first attempt since
+   CONF_USERPWD bit isn't set at first, but curl later turns it on when it
+   checks for CONF_NETRC bit. So when curl tries to redo everything due to
+   redirection, it segfaults trying to access *data->userpwd.
+
+Version 5.9.1
+
+ Daniel (30 July 1999)
+ - Steve Walch pointed out that there is a memory leak in the formdata
+   functions. I added a FormFree() function that is now used and supposed to
+   correct this flaw.
+
+ - Mark Wotton reported:
+   'curl -L https://www.cwa.com.au/' core dumps.  I managed to cure this by
+   correcting the cleanup procedure. The bug seems to be gone with my OpenSSL
+   0.9.2b, although still occurs when I run the ~100 years old SSLeay 0.8.0. I
+   don't know whether it is curl or SSLeay that is to blame for that.
+
+ - Marcus Klein:
+   Reported an FTP upload resume bug that I really can't repeat nor understand.
+   I leave it here so that it won't be forgotten.
+
+ Daniel (29 July 1999)
+ - Costya Shulyupin suggested support for longer URLs when following Location:
+   and I could only agree and fix it!
+
+ - Leigh Purdie found a problem in the upload/POST department. It turned out
+   that http.c accidentaly cleared the pointer instead of the byte counter
+   when supposed to.
+
+ - Costya Shulyupin pointed out a problem with port numbers and Location:. If
+   you had a server at a non-standard port that redirected to an URL using a
+   standard port number, curl still used that first port number.
+
+ - Ralph Beckmann pointed out a problem when using both CONF_FOLLOWLOCATION
+   and CONF_FAILONERROR simultaneously. Since the CONF_FAILONERROR exits on
+   the 302-code that the follow location header outputs it will never show any
+   html on location: pages. I have now made it look for >=400 codes if
+   CONF_FOLLOWLOCATION is set.
+
+ - 'struct slist' is now renamed to 'struct curl_slist' (as suggested by Ralph
+   Beckmann).
+
+ - Joshua Swink and Rick Welykochy were the first to point out to me that the
+   latest OpenSSL package now have moved the standard include path. It is now
+   in /usr/local/ssl/include/openssl and I have now modified the --enable-ssl
+   option for the configure script to use that as the primary path, and I
+   leave the former path too to work with older packages of OpenSSL too.
+
+ Daniel (9 June 1999)
+ - I finally understood the IRIX problem and now it seem to compile on it!
+   I am gonna remove those #define strcasecmp() things once and for all now.
+
+ Daniel (4 June 1999)
+ - I adjusted the FTP reply 227 parser to make the PASV command work better
+   with more ftp servers. Appearantly the Roxen Challanger server replied
+   something curl 5.9 could deal with! :-( Reported by Ashley Reid-Montanaro
+   and Mark Butler brought a solution for it.
+
+ Daniel (26 May 1999)
+ - Rearranged. README is new, the old one is now README.curl and I added a
+   README.libcurl with text I got from Ralph Beckmann.
+
+ - I also updated the INSTALL text.
+
+ Daniel (25 May 1999)
+ - David Jonathan Lowsky correctly pointed out that curl didn't properly deal
+   with form posting where the variable shouldn't have any content, as in curl
+   -F "form=" www.site.com. It was now fixed.
+
+Version 5.9
+
+ Daniel (22 May 1999)
+ - I've got a bug report from Aaron Scarisbrick in which he states he has some
+   problems with -L under FreeBSD 3.0. I have previously got another bug
+   report from Stefan Grether which points at an error with similar sympthoms
+   when using win32. I made the allocation of the new url string a bit faster
+   and different, don't know if it actually improves anything though...
+
+ Daniel (20 May 1999)
+ - Made the cookie parser deal with CRLF newlines too.
+
+ Daniel (19 May 1999)
+ - Download() didn't properly deal with failing return codes from the sread()
+   function. Adam Coyne found the problem in the win32 version, and Troy Engel
+   helped me out isolating it.
+
+ Daniel (16 May 1999)
+ - Richard Adams pointed out a bug I introduced in 5.8. --dump-header doesn't
+   work anymore! :-/ I fixed it now.
+
+ - After a suggestion by Joshua Swink I added -S / --show-error to force curl
+   to display the error message in case of an error, even if -s/--silent was
+   used.
+
+ Daniel (10 May 1999)
+ - I moved the stuff concerning HTTP, DICT and TELNET it their own source
+   files now. It is a beginning on my clean-up of the sources to make them
+   layer all those protocols better to enable more to be added easier in the
+   future!
+
+ - Leon Breedt sent me some files I've not put into the main curl
+   archive. They're for creating the Debian package thingie. He also sent me a
+   debian package that I've made available for download at the web page
+
+ Daniel (9 May 1999)
+ - Made it compile on cygwin too.
+
+ Troy Engel (7 May 1999)
+ - Brought a series of patches to allow curl to compile smoothly on MSVC++ 6
+   again!
+
+ Daniel (6 May 1999)
+ - I changed the #ifdef HAVE_STRFTIME placement for the -z code so that it
+   will be easier to discover systems that don't have that function and thus
+   can't use -z successfully. Made the strftime() get used if WIN32 is defined
+   too.
+
+Version 5.8
+
+ Daniel (5 May 1999)
+ - I've had it with this autoconf/automake mess. It seems to work allright
+   for most people who don't have automake installed, but for those who have
+   there are problems all over.
+
+   I've got like five different bug reports on this only the last
+   week... Claudio Neves and Federico Bianchi and root <duggerj001 at
+   hawaii.rr.com> are some of them reporting this.
+
+   Currently, I have no really good fix since I want to use automake myself to
+   generate the Makefile.in files. I've found out that the @SHELL@-problems
+   can often be fixed by manually invoking 'automake' in the archive root
+   before you run ./configure... I've hacked my maketgz script now to fiddle
+   a bit with this and my tests seem to work better than before at least!
+
+ Daniel (4 May 1999)
+ - mkhelp.pl has been doing badly lately. I corrected a case problem in
+   the regexes.
+
+ - I've now remade the -o option to not touch the file unless it needs to.
+   I had to do this to make -z option really fine, since now you can make a
+   curl fetch and use a local copy's time when downloading to that file, as
+   in:
+
+        curl -z dump -o dump remote.site.com/file.html
+
+   This will only get the file if the remote one is newer than the local.
+   I'm aware that this alters previous behaviour a little. Some scripts out
+   there may depend on that the file is always touched...
+
+ - Corrected a bug in the SSLv2/v3 selection.
+
+ - Felix von Leitner requested that curl should be able to send
+   "If-Modified-Since" headers, which indeed is a fair idea.  I implemented it
+   right away! Try -z <expression> where expression is a full GNU date
+   expression or a file name to get the date from!
+
+ Stephan Lagerholm (30 Apr 1999)
+ - Pointed out a problem with the src/Makefile for FreeBSD. The RM variable
+   isn't set and causes the make to fail.
+
+ Daniel (26 April 1999)
+ - Am I silly or what? Irving Wolfe pointed out to me that the curl version
+   number was not set properly. Hasn't been since 5.6. This was due to a bug
+   in my maketgz script!
+
+ David Eriksson (25 Apr 1999)
+ - Found a bug in cookies.c that made it crash at times.
+
+Version 5.7.1
+
+ Doug Kaufman (23 Apr 1999)
+ - Brought two sunos 4 fixes. One of them being the hostip.c fix mentioned
+   below and the other one a correction in include/stdcheaders.h
+
+ - Added a paragraph about compiling with the US-version of openssl to the
+   INSTALL file.
+
+ Daniel
+ - New mailing list address. Info updated on the web page as well as in the
+   README file
+
+ Greg Onufer (20 Apr 1999)
+ - hostip.c didn't compile properly on SunOS 5.5.1.
+   It needs an #include <sys/types.h>
+
+Version 5.7
+
+ Daniel (Apr 20 1999)
+ - Decided to upload a non-beta version right now!
+
+ - Made curl support any-length HTTP headers. The destination buffer is now
+   simply enlarged every time it turns out to be too small!
+
+ - Added the FAQ file to the archive. Still a bit smallish, but it is a
+   start.
+
+ Eric Thelin (15 Apr 1999)
+ - Made -D accept '-' instead of filename to write to stdout.
+
+Version 5.6.3beta
+
+ Daniel (Apr 12 1999)
+
+ - Changed two #ifdef WIN32 to better #ifdef <errorcode> when connect()ing
+   in url.c and ftp.c. Makes cygwin32 deal with them better too. We should
+   try to get some decent win32-replacement there. Anyone?
+
+ - The old -3/--crlf option is now ONLY --crlf!
+
+ - I changed the "SSL fix" to a more lame one, but that doesn't remove as
+   much functionality. Now I've enabled the lib to select what SSL version it
+   should try first. Appearantly some older SSL-servers don't like when you
+   talk v3 with them so you need to be able to force curl to talk v2 from the
+   start. The fix dated April 6 and posted on the mailing list forced curl to
+   use v2 at all times using a modern OpenSSL version, but we don't really
+   want such a crippled solution.
+ 
+ - Marc Boucher sent me a patch that corrected a math error for the
+   "Curr.Speed" progress meter.
+
+ - Eric Thelin sent me a patch that enables '-K -' to read a config file from
+   stdin.
+
+ - I found out we didn't close the file properly before so I added it!
+
+ Daniel (Apr 9 1999)
+ - Yu Xin pointed out a problem with ftp download resume.  It didn't work at
+   all! ;-O
+
+ Daniel (Apr 6 1999)
+ - Corrected the version string part generated for the SSL version.
+
+ - I found a way to make some other SSL page work with openssl 0.9.1+ that
+   previously didn't (ssleay 0.8.0 works with it though!). Trying to get
+   some real info from the OpenSSL guys to see how I should do to behave the
+   best way. SSLeay 0.8.0 shouldn't be that much in use anyway these days!
+
+Version 5.6.2beta
+
+ Daniel (Apr 4 1999)
+ - Finally have curl more cookie "aware". Now read carefully. This is how
+   it works.
+   To make curl read cookies from an already existing file, in plain header-
+   format (like from the headers of a previous fetch) invoke curl with the
+   -b flag like:
+
+        curl -b file http://site/foo.html
+
+   Curl will then use all cookies it finds matching. The old style that sets
+   a single cookie with -b is still supported and is used if the string
+   following -b includes a '=' letter, as in "-b name=daniel".
+
+   To make curl read the cookies sent in combination with a location: (which
+   sites often do) point curl to read a non-existing file at first (i.e
+   to start with no existing cookies), like:
+
+        curl -b nowhere http://site/setcookieandrelocate.html
+
+ - Added a paragraph in the TODO file about the SSL problems recently
+   reported. Evidently, some kind of SSL-problem curl may need to address.
+
+ - Better "Location:" following.
+
+ Douglas E. Wegscheid (Tue, 30 Mar 1999)
+ - A subsecond display patch.
+
+ Daniel (Mar 14 1999)
+ - I've separated the version number of libcurl and curl now. To make
+   things a little easier, I decided to start the curl numbering from
+   5.6 and the former version number known as "curl" is now the one
+   set for libcurl.
+
+ - Removed the 'enable-no-pass' from configure, I doubt anyone wanted
+   that.
+
+ - Made lots of tiny adjustments to compile smoothly with cygwin under
+   win32. It's a killer for porting this to win32, bye bye VC++! ;-)
+   Compiles and builds out-of-the-box now. See the new wordings in
+   INSTALL for details.
+
+ - Beginning experiments with downloading multiple document from a http
+   server while remaining connected.
+
+Version 5.6beta
+
+ Daniel (Mar 13 1999)
+ - Since I've changed so much, I thought I'd just go ahead and implement the
+   suggestion from Douglas E. Wegscheid. -D or --dump-header is now storing
+   HTTP headers separately in the specified file.
+
+ - Added new text to INSTALL on what to do to build this on win32 now.
+
+ - Aaargh. I had to take a step back and prefix the shared #include files
+   in the sources with "../include/" to please VC++...
+
+ Daniel (Mar 12 1999)
+ - Split the url.c source into many tiny sources for better readability
+   and smaller size.
+
+ Daniel (Mar 11 1999)
+ - Started to change stuff for a move to make libcurl and a more separate
+   curl application that uses the libcurl. Made the libcurl sources into
+   the new lib directory while the curl application will remain in src as
+   before. New makefiles, adjusted configure script and so.
+
+   libcurl.a built quickly and easily. I better make a better interface to
+   the lib functions though.
+
+   The new root dir include/ is supposed to contain the public information
+   about the new libcurl. It is a little ugly so far :-)
+
+
+ Daniel (Mar 1 1999)
+ - Todd Kaufmann sent me a good link to Netscape's cookie spec as well as the
+   info that RFC 2109 specifies how to use them.  The link is now in the
+   README and the RFC in the RESOURCES.
+
+ Daniel (Feb 23 1999)
+ - Finally made configure accept --with-ssl to look for SSL libs and includes
+   in the "standard" place /usr/local/ssl...
+
+ Daniel (Feb 22 1999)
+ - Verified that curl linked fine with OpenSSL 0.9.1c which seems to be
+   the most recent.
+
+ Henri Gomez (Fri Feb  5 1999)
+ - Sent in an updated curl-ssl.spec. I still miss the script that builds an
+   RPM automatically...
+
+Version 5.5.1
+
+ Mark Butler (27 Jan 1999)
+ - Corrected problems in Download().
+
+ Danitel Stenberg (25 Jan 1999)
+ - Jeremie Petit pointed out a few flaws in the source that prevented it from
+   compile warning free with the native compiler under Digital Unix v4.0d.
+
+Version 5.5
+
+ Daniel Stenberg (15 Jan 1999)
+ - Added Bjorns small text to the README about the DICT protocol.
+
+ Daniel Stenberg (11 Jan 1999)
+ - <jswink at softcom.net> reported about the win32-versioin: "Doesn't use
+   ALL_PROXY environment variable". Turned out to be because of the static-
+   buffer nature of the win32 environment variable calls!
+
+ Bjorn Reese (10 Jan 1999)
+ - I have attached a simple addition for the DICT protocol (RFC 2229).
+   It performs dictionary lookups. The output still needs to be better
+   formatted.
+
+   To test it try (the exact format, and more examples are described in
+   the RFC)
+
+        dict://dict.org/m:hello
+        dict://dict.org/m:hello::soundex
+
+
+ Vicente Garcia (10 Jan 1999)
+ - Corrected the progress meter for files larger than 20MB.
+
+ Daniel Stenberg (7 Jan 1999)
+ - Corrected the -t and -T help texts. They claimed to be FTP only.
+
+Version 5.4
+
+ Daniel Stenberg
+ (7 Jan 1999)
+ - Irving Wolfe reported that curl -s didn't always supress the progress
+   reporting. It was the form post that autoamtically always switched it on
+   again. This is now corrected!
+
+ (4 Jan 1999)
+ - Andreas Kostyrka suggested I'd add PUT and he helped me out to test it. If
+   you use -t or -T now on a http or https server, PUT will be used for file
+   upload.
+
+   I removed the former use of -T with HTTP. I doubt anyone ever really used
+   that.
+
+ (4 Jan 1999)
+ - Erik Jacobsen found a width bug in the mprintf() function.  I corrected it
+   now.
+
+ (4 Jan 1999)
+ - As John V. Chow pointed out to me, curl accepted very limited URL sizes. It
+   should now accept path parts that are up to at least 4096 bytes.
+
+ - Somehow I screwed up when applying the AIX fix from Gilbert Ramirez, so
+   I redid that now.
+
--- a/CHANGES.2000
+++ b/CHANGES.2000
--- a/CHANGES.2001
+++ b/CHANGES.2001
--- a/21
+++ b/21
@@ -0,0 +1,21 @@
+COPYRIGHT AND PERMISSION NOTICE
+
+Copyright (c) 1996 - 2002, Daniel Stenberg, <daniel@haxx.se>.
+
+All rights reserved.
+
+Permission to use, copy, modify, and distribute this software for any purpose
+with or without fee is hereby granted, provided that the above copyright
+notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
+NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of a copyright holder shall not
+be used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization of the copyright holder.
--- a/40
+++ b/40
@@ -10,14 +10,10 @@ This file is only present in the CVS - never in release archives. It contains
 information about other files and things that the CVS repository keeps in its
 inner sanctum.

-Use autoconf 2.50 and no earlier. Also, try having automake 1.4 and libtool
-1.4 at least.
-
-You will need perl to generate the src/hugehelp.c file. The file
-src/hugehelp.c.cvs is a one-shot file that you can rename to src/hugehelp.c if
-you really can't generate the true file yourself!
+Compile and build instructions follow below.

  CHANGES.0     contains ancient changes.
+  CHANGES.$year contains changes for the particular year.

  memanalyze.pl is for analyzing the output generated by curl if -DMALLOCDEBUG
                is used when compiling
@@ -26,12 +22,38 @@ you really can't generate the true file yourself!

  Makefile.dist is included as the root Makefile in distribution archives

-  perl/contrib/ is a subdirectory with various perl scripts
-
-  java/         is a subdirectory with the Java interface to libcurl
+  perl/         is a subdirectory with various perl scripts

 To build after having extracted everything from CVS, do this:

 ./buildconf
 ./configure
 make
+
+REQUIREMENTS
+
+ You need the following software installed:
+
+ o autoconf 2.50 (or later)
+ o automake 1.5 (or later)
+ o libtool  1.4 (or later)
+ o GNU m4 (required by autoconf)
+
+ o nroff + perl (if you don't have nroff and perl and you for some reason
+   don't want to install them, you can rename the source file
+   src/hugehelp.c.cvs to src/hugehelp.c and avoid having to generate this
+   file. This will of course give you an older version of the file that isn't
+   up-to-date. That file was checked in once and won't be updated very
+   regularly.)
+
+MAC OS X
+
+ For Mac OS X users, Guido Neitzer write down the following step-by-step guide:
+
+ 1. Install fink (http://fink.sourceforge.net)
+ 2. Update fink to the newest version (with the installed fink)
+ 3. Install the latest version of autoconf, automake and m4 with fink
+ 4. Install version 1.4.1 of libtool - you find it in the "unstable" section
+    (read the manual to see how to get unstable versions)
+ 5. Get cURL from the cvs
+ 6. Build cURL with "./buildconf", "./configure", "make", "sudo make install"
--- a/2
+++ b/2
@@ -1,4 +1,4 @@
- Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al.
+ Copyright (C) 1998-2002, Daniel Stenberg, <daniel@haxx.se>, et al.

 Everyone is permitted to copy and distribute verbatim copies of this license
 document, but changing it is not allowed.
--- a/MITX.txt
+++ b/MITX.txt
@@ -1,28 +1,21 @@
 COPYRIGHT AND PERMISSION NOTICE

-Copyright (c) 2000, Daniel Stenberg, <daniel@haxx.se>.
+Copyright (c) 1996 - 2002, Daniel Stenberg, <daniel@haxx.se>.

 All rights reserved.

-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, and/or sell copies of the
-Software, and to permit persons to whom the Software is furnished to do so,
-provided that the above copyright notice(s) and this permission notice appear
-in all copies of the Software and that both the above copyright notice(s) and
-this permission notice appear in supporting documentation.
+Permission to use, copy, modify, and distribute this software for any purpose
+with or without fee is hereby granted, provided that the above copyright
+notice and this permission notice appear in all copies.

 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
-NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE
-LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
-DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
-CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+OR OTHER DEALINGS IN THE SOFTWARE.

 Except as contained in this notice, the name of a copyright holder shall not
 be used in advertising or otherwise to promote the sale, use or other dealings
 in this Software without prior written authorization of the copyright holder.
-
--- a/Makefile.am
+++ b/Makefile.am
@@ -2,21 +2,22 @@
 # $Id$
 #

-AUTOMAKE_OPTIONS = foreign no-dependencies
+AUTOMAKE_OPTIONS = foreign

-EXTRA_DIST = \
-	CHANGES LEGAL maketgz MITX.txt MPL-1.1.txt \
-	config-win32.h reconf packages/README Makefile.dist \
-	curl-config.in libtool
+EXTRA_DIST = CHANGES COPYING maketgz UPGRADE reconf Makefile.dist	\
+curl-config.in build_vms.com curl-mode.el

 bin_SCRIPTS = curl-config

-SUBDIRS = docs lib src include tests packages perl php
+SUBDIRS = docs lib src include tests packages

 # create a root makefile in the distribution:
 dist-hook:
 	cp $(srcdir)/Makefile.dist $(distdir)/Makefile

+html:
+	cd docs; make html
+
 check: test

 test:
@@ -61,5 +62,11 @@ rpm:
 pkgadd:
 	umask 022 ; \
 	make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
-	cat LEGAL MITX.txt MPL-1.1.txt > $(srcdir)/packages/Solaris/copyright ; \
+	cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
 	cd $(srcdir)/packages/Solaris && $(MAKE) package
+
+#
+# Build a cygwin binary tarball installation file
+# resulting .tar.bz2 file will end up at packages/Win32/cygwin
+cygwinbin:
+	$(MAKE) -C packages/Win32/cygwin cygwinbin
--- a/Makefile.dist
+++ b/Makefile.dist
@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___ 
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # In order to be useful for every potential user, curl and libcurl are
 # dual-licensed under the MPL and the MIT/X-derivate licenses.
@@ -34,22 +34,28 @@ borland:
 	cd src & make -f Makefile.b32

 mingw32:
-	cd lib & make -f Makefile.m32
-	cd src & make -f Makefile.m32
+	cd lib & make -f Makefile.m32 ZLIB=1
+	cd src & make -f Makefile.m32 ZLIB=1

 mingw32-ssl:
-	cd lib & make -f Makefile.m32 SSL=1
-	cd src & make -f Makefile.m32 SSL=1
+	cd lib & make -f Makefile.m32 SSL=1 ZLIB=1
+	cd src & make -f Makefile.m32 SSL=1 ZLIB=1

 vc:
 	cd lib
-	nmake -f Makefile.vc6
+	nmake -f Makefile.vc6 cfg=release
 	cd ..\src
 	nmake -f Makefile.vc6

 vc-ssl:
 	cd lib
-	nmake -f Makefile.vc6 release-ssl
+	nmake -f Makefile.vc6 cfg=release-ssl
+	cd ..\src
+	nmake -f Makefile.vc6 cfg=release-ssl
+
+vc-ssl-dll:
+	cd lib
+	nmake -f Makefile.vc6 cfg=release-ssl-dll
 	cd ..\src
 	nmake -f Makefile.vc6

--- a/8
+++ b/8
@@ -12,20 +12,22 @@ README
  document.

  libcurl is a library that Curl is using to do its job. It is readily
-  available to be used by your software. Read the libcurl.5 man page to
+  available to be used by your software. Read the libcurl.3 man page to
  find out how!

  You find answers to the most frequent questions we get in the FAQ document.

  Study the LEGAL file for distribution terms and similar.

-  Always try the Curl web site for the latest news:
+  Visit the curl web site or mirror for the latest news:

-        http://curl.haxx.se
+        http://curl.haxx.se/
+        http://curl.sf.net/

  The official download mirror sites are:

        Sweden    -- ftp://ftp.sunet.se/pub/www/utilities/curl/
+        Sweden    -- http://cool.haxx.se/curl/
        Germany   -- ftp://ftp.fu-berlin.de/pub/unix/network/curl/

  To download the very latest source off the CVS server do this:
--- a/34
+++ b/34
@@ -0,0 +1,34 @@
+Upgrading to curl/libcurl 7.10 from any previous version
+========================================================
+
+libcurl 7.10 performs peer SSL certificate verification by default. This is
+done by installing a default CA cert bundle on 'make install' (or similar),
+that CA bundle package is used by default on operations against SSL servers.
+
+Alas, if you communicate with HTTPS servers using certifcates that are signed
+by CAs present in the bundle, you will not notice any changed behavior and you
+will seeminglessly get a higher security level on your SSL connections since
+can be sure that the remote server really is the one it claims to be.
+
+If the remote server uses a self-signed certificate, or if you don't install
+curl's CA cert bundle or if it uses a certificate signed by a CA that isn't
+included in the bundle, then you need to do one of the following:
+
+ 1. Tell libcurl to *not* verify the peer. With libcurl you disable with with
+    curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, FALSE);
+
+    With the curl command tool, you disable this with -k/--insecure.
+
+ 2. Get a CA certificate that can verify the remote server and use the proper
+    option to point out this CA cert for verification when connecting. For
+    libcurl hackers: curl_easy_setopt(curl, CURLOPT_CAPATH, capath);
+
+    With the curl command tool: --cacert [file]
+
+This upgrade procedure has been deemed The Right Thing even though it adds
+this extra trouble for some users, since it adds security to a majority of the
+SSL connections that previously weren't really secure.
+
+It turned out many people were using previous versions of curl/libcurl without
+realizing the need for the CA cert options to get truly secure SSL
+connections.
--- a/acconfig.h
+++ b/acconfig.h
@@ -54,3 +54,37 @@

 /* Define if you have a working OpenSSL installation */
 #undef OPENSSL_ENABLED
+
+/* Define the one correct non-blocking socket method below */
+#undef HAVE_FIONBIO
+#undef HAVE_IOCTLSOCKET
+#undef HAVE_IOCTLSOCKET_CASE
+#undef HAVE_O_NONBLOCK
+#undef HAVE_DISABLED_NONBLOCKING
+
+/* Define this to 'int' if in_addr_t is not an available typedefed type */
+#undef in_addr_t
+
+/* Define to disable DICT */
+#undef CURL_DISABLE_DICT
+
+/* Define to disable FILE */
+#undef CURL_DISABLE_FILE
+
+/* Define to disable FTP */
+#undef CURL_DISABLE_FTP
+
+/* Define to disable GOPHER */
+#undef CURL_DISABLE_GOPHER
+
+/* Define to disable HTTP */
+#undef CURL_DISABLE_HTTP
+
+/* Define to disable LDAP */
+#undef CURL_DISABLE_LDAP
+
+/* Define to disable TELNET */
+#undef CURL_DISABLE_TELNET
+
+/* Define if you have zlib present */
+#undef HAVE_LIBZ
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -0,0 +1,447 @@
+dnl Check for how to set a socket to non-blocking state. There seems to exist
+dnl four known different ways, with the one used almost everywhere being POSIX
+dnl and XPG3, while the other different ways for different systems (old BSD,
+dnl Windows and Amiga).
+dnl
+dnl There are two known platforms (AIX 3.x and SunOS 4.1.x) where the
+dnl O_NONBLOCK define is found but does not work. This condition is attempted
+dnl to get caught in this script by using an excessive number of #ifdefs...
+dnl
+AC_DEFUN(CURL_CHECK_NONBLOCKING_SOCKET,
+[
+  AC_MSG_CHECKING([non-blocking sockets style])
+
+  AC_TRY_COMPILE([
+/* headers for O_NONBLOCK test */
+#include <sys/types.h>
+#include <unistd.h>
+#include <fcntl.h>
+],[
+/* try to compile O_NONBLOCK */
+
+#if defined(sun) || defined(__sun__) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+# if defined(__SVR4) || defined(__srv4__)
+#  define PLATFORM_SOLARIS
+# else
+#  define PLATFORM_SUNOS4
+# endif
+#endif
+#if (defined(_AIX) || defined(__xlC__)) && !defined(_AIX4)
+# define PLATFORM_AIX_V3
+#endif
+
+#if defined(PLATFORM_SUNOS4) || defined(PLATFORM_AIX_V3)
+#error "O_NONBLOCK does not work on this platform"
+#endif
+  int socket;
+  int flags = fcntl(socket, F_SETFL, flags | O_NONBLOCK);
+],[
+dnl the O_NONBLOCK test was fine
+nonblock="O_NONBLOCK"
+AC_DEFINE(HAVE_O_NONBLOCK)
+],[
+dnl the code was bad, try a different program now, test 2
+
+  AC_TRY_COMPILE([
+/* headers for FIONBIO test */
+#include <unistd.h>
+#include <stropts.h>
+],[
+/* FIONBIO source test */
+ int flags = ioctl(socket, FIONBIO, &flags);
+],[
+dnl FIONBIO test was good
+nonblock="FIONBIO"
+AC_DEFINE(HAVE_FIONBIO)
+],[
+dnl FIONBIO test was also bad
+dnl the code was bad, try a different program now, test 3
+
+  AC_TRY_COMPILE([
+/* headers for ioctlsocket test (cygwin?) */
+#include <windows.h>
+],[
+/* ioctlsocket source code */
+ int flags = ioctlsocket(socket, FIONBIO, &flags);
+],[
+dnl ioctlsocket test was good
+nonblock="ioctlsocket"
+AC_DEFINE(HAVE_IOCTLSOCKET)
+],[
+dnl ioctlsocket didnt compile!
+
+  AC_TRY_COMPILE([
+/* headers for IoctlSocket test (Amiga?) */
+#include <sys/ioctl.h>
+],[
+/* IoctlSocket source code */
+ int flags = IoctlSocket(socket, FIONBIO, (long)1);
+],[
+dnl ioctlsocket test was good
+nonblock="IoctlSocket"
+AC_DEFINE(HAVE_IOCTLSOCKET_CASE)
+],[
+dnl ioctlsocket didnt compile!
+nonblock="nada"
+AC_DEFINE(HAVE_DISABLED_NONBLOCKING)
+])
+dnl end of forth test
+
+])
+dnl end of third test
+
+])
+dnl end of second test
+
+])
+dnl end of non-blocking try-compile test
+  AC_MSG_RESULT($nonblock)
+
+  if test "$nonblock" = "nada"; then
+    AC_MSG_WARN([non-block sockets disabled])
+  fi
+])
+
+dnl Check for socklen_t: historically on BSD it is an int, and in
+dnl POSIX 1g it is a type of its own, but some platforms use different
+dnl types for the argument to getsockopt, getpeername, etc.  So we
+dnl have to test to find something that will work.
+AC_DEFUN([TYPE_SOCKLEN_T],
+[
+   AC_CHECK_TYPE([socklen_t], ,[
+      AC_MSG_CHECKING([for socklen_t equivalent])
+      AC_CACHE_VAL([curl_cv_socklen_t_equiv],
+      [
+         # Systems have either "struct sockaddr *" or
+         # "void *" as the second argument to getpeername
+         curl_cv_socklen_t_equiv=
+         for arg2 in "struct sockaddr" void; do
+            for t in int size_t unsigned long "unsigned long"; do
+               AC_TRY_COMPILE([
+                  #include <sys/types.h>
+                  #include <sys/socket.h>
+
+                  int getpeername (int, $arg2 *, $t *);
+               ],[
+                  $t len;
+                  getpeername(0,0,&len);
+               ],[
+                  curl_cv_socklen_t_equiv="$t"
+                  break
+               ])
+            done
+         done
+
+         if test "x$curl_cv_socklen_t_equiv" = x; then
+            AC_MSG_ERROR([Cannot find a type to use in place of socklen_t])
+         fi
+      ])
+      AC_MSG_RESULT($curl_cv_socklen_t_equiv)
+      AC_DEFINE_UNQUOTED(socklen_t, $curl_cv_socklen_t_equiv,
+			[type to use in place of socklen_t if not defined])],
+      [#include <sys/types.h>
+#include <sys/socket.h>])
+])
+
+dnl Check for in_addr_t: it is used to receive the return code of inet_addr()
+dnl and a few other things. If not found, we set it to unsigned int, as even
+dnl 64-bit implementations use to set it to a 32-bit type.
+AC_DEFUN([TYPE_IN_ADDR_T],
+[
+   AC_CHECK_TYPE([in_addr_t], ,[
+      AC_MSG_CHECKING([for in_addr_t equivalent])
+      AC_CACHE_VAL([curl_cv_in_addr_t_equiv],
+      [
+         # Systems have either "struct sockaddr *" or
+         # "void *" as the second argument to getpeername
+         curl_cv_in_addr_t_equiv=
+         for t in int size_t unsigned long "unsigned long"; do
+            AC_TRY_COMPILE([
+               #include <sys/types.h>
+               #include <sys/socket.h>
+               #include <arpa/inet.h>
+            ],[
+               $t data = inet_addr ("1.2.3.4");
+            ],[
+               curl_cv_in_addr_t_equiv="$t"
+               break
+            ])
+         done
+
+         if test "x$curl_cv_in_addr_t_equiv" = x; then
+            AC_MSG_ERROR([Cannot find a type to use in place of in_addr_t])
+         fi
+      ])
+      AC_MSG_RESULT($curl_cv_in_addr_t_equiv)
+      AC_DEFINE_UNQUOTED(in_addr_t, $curl_cv_in_addr_t_equiv,
+			[type to use in place of in_addr_t if not defined])],
+      [#include <sys/types.h>
+#include <sys/socket.h>
+#include <arpa/inet.h>])
+])
+
+dnl ************************************************************
+dnl check for "localhost", if it doesn't exist, we can't do the
+dnl gethostbyname_r tests!
+dnl 
+
+AC_DEFUN(CURL_CHECK_WORKING_RESOLVER,[
+AC_MSG_CHECKING([if "localhost" resolves])
+AC_TRY_RUN([
+#include <string.h>
+#include <sys/types.h>
+#include <netdb.h>
+
+int
+main () {
+struct hostent *h;
+h = gethostbyname("localhost");
+exit (h == NULL ? 1 : 0); }],[
+      AC_MSG_RESULT(yes)],[
+      AC_MSG_RESULT(no)
+      AC_MSG_ERROR([can't figure out gethostbyname_r() since localhost doesn't resolve])
+
+      ]
+)
+])
+
+dnl ************************************************************
+dnl check for working getaddrinfo()
+dnl
+AC_DEFUN(CURL_CHECK_WORKING_GETADDRINFO,[
+  AC_CACHE_CHECK(for working getaddrinfo, ac_cv_working_getaddrinfo,[
+  AC_TRY_RUN( [
+#include <netdb.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+
+void main(void) {
+    struct addrinfo hints, *ai;
+    int error;
+
+    memset(&hints, 0, sizeof(hints));
+    hints.ai_family = AF_UNSPEC;
+    hints.ai_socktype = SOCK_STREAM;
+    error = getaddrinfo("127.0.0.1", "8080", &hints, &ai);
+    if (error) {
+        exit(1);
+    }
+    else {
+        exit(0);
+    }
+}
+],[
+  ac_cv_working_getaddrinfo="yes"
+],[
+  ac_cv_working_getaddrinfo="no"
+],[
+  ac_cv_working_getaddrinfo="yes"
+])])
+if test "$ac_cv_working_getaddrinfo" = "yes"; then
+  AC_DEFINE(HAVE_GETADDRINFO, 1, [Define if getaddrinfo exists and works])
+  AC_DEFINE(ENABLE_IPV6, 1, [Define if you want to enable IPv6 support])
+
+  IPV6_ENABLED=1
+  AC_SUBST(IPV6_ENABLED)
+fi
+])
+
+
+AC_DEFUN(CURL_CHECK_LOCALTIME_R,
+[
+  dnl check for a few thread-safe functions
+  AC_CHECK_FUNCS(localtime_r,[
+    AC_MSG_CHECKING(whether localtime_r is declared)
+    AC_EGREP_CPP(localtime_r,[
+#include <time.h>],[
+      AC_MSG_RESULT(yes)],[
+      AC_MSG_RESULT(no)
+      AC_MSG_CHECKING(whether localtime_r with -D_REENTRANT is declared)
+      AC_EGREP_CPP(localtime_r,[
+#define _REENTRANT
+#include <time.h>],[
+	AC_DEFINE(NEED_REENTRANT)
+	AC_MSG_RESULT(yes)],
+	AC_MSG_RESULT(no))])])
+])
+
+AC_DEFUN(CURL_CHECK_INET_NTOA_R,
+[
+  dnl determine if function definition for inet_ntoa_r exists.
+  AC_CHECK_FUNCS(inet_ntoa_r,[
+    AC_MSG_CHECKING(whether inet_ntoa_r is declared)
+    AC_EGREP_CPP(inet_ntoa_r,[
+#include <arpa/inet.h>],[
+      AC_DEFINE(HAVE_INET_NTOA_R_DECL)
+      AC_MSG_RESULT(yes)],[
+      AC_MSG_RESULT(no)
+      AC_MSG_CHECKING(whether inet_ntoa_r with -D_REENTRANT is declared)
+      AC_EGREP_CPP(inet_ntoa_r,[
+#define _REENTRANT
+#include <arpa/inet.h>],[
+	AC_DEFINE(HAVE_INET_NTOA_R_DECL)
+	AC_DEFINE(NEED_REENTRANT)
+	AC_MSG_RESULT(yes)],
+	AC_MSG_RESULT(no))])])
+])
+
+AC_DEFUN(CURL_CHECK_GETHOSTBYADDR_R,
+[
+  dnl check for number of arguments to gethostbyaddr_r. it might take
+  dnl either 5, 7, or 8 arguments.
+  AC_CHECK_FUNCS(gethostbyaddr_r,[
+    AC_MSG_CHECKING(if gethostbyaddr_r takes 5 arguments)
+    AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <netdb.h>],[
+char * address;
+int length;
+int type;
+struct hostent h;
+struct hostent_data hdata;
+int rc;
+rc = gethostbyaddr_r(address, length, type, &h, &hdata);],[
+      AC_MSG_RESULT(yes)
+      AC_DEFINE(HAVE_GETHOSTBYADDR_R_5)
+      ac_cv_gethostbyaddr_args=5],[
+      AC_MSG_RESULT(no)
+      AC_MSG_CHECKING(if gethostbyaddr_r with -D_REENTRANT takes 5 arguments)
+      AC_TRY_COMPILE([
+#define _REENTRANT
+#include <sys/types.h>
+#include <netdb.h>],[
+char * address;
+int length;
+int type;
+struct hostent h;
+struct hostent_data hdata;
+int rc;
+rc = gethostbyaddr_r(address, length, type, &h, &hdata);],[
+	AC_MSG_RESULT(yes)
+	AC_DEFINE(HAVE_GETHOSTBYADDR_R_5)
+	AC_DEFINE(NEED_REENTRANT)
+	ac_cv_gethostbyaddr_args=5],[
+	AC_MSG_RESULT(no)
+	AC_MSG_CHECKING(if gethostbyaddr_r takes 7 arguments)
+	AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <netdb.h>],[
+char * address;
+int length;
+int type;
+struct hostent h;
+char buffer[8192];
+int h_errnop;
+struct hostent * hp;
+
+hp = gethostbyaddr_r(address, length, type, &h,
+                     buffer, 8192, &h_errnop);],[
+	  AC_MSG_RESULT(yes)
+	  AC_DEFINE(HAVE_GETHOSTBYADDR_R_7)
+	  ac_cv_gethostbyaddr_args=7],[
+	  AC_MSG_RESULT(no)
+	  AC_MSG_CHECKING(if gethostbyaddr_r takes 8 arguments)
+	  AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <netdb.h>],[
+char * address;
+int length;
+int type;
+struct hostent h;
+char buffer[8192];
+int h_errnop;
+struct hostent * hp;
+int rc;
+
+rc = gethostbyaddr_r(address, length, type, &h,
+                     buffer, 8192, &hp, &h_errnop);],[
+	    AC_MSG_RESULT(yes)
+	    AC_DEFINE(HAVE_GETHOSTBYADDR_R_8)
+	    ac_cv_gethostbyaddr_args=8],[
+	    AC_MSG_RESULT(no)
+	    have_missing_r_funcs="$have_missing_r_funcs gethostbyaddr_r"])])])])])
+])
+
+AC_DEFUN(CURL_CHECK_GETHOSTBYNAME_R,
+[
+  dnl check for number of arguments to gethostbyname_r. it might take
+  dnl either 3, 5, or 6 arguments.
+  AC_CHECK_FUNCS(gethostbyname_r,[
+    AC_MSG_CHECKING([if gethostbyname_r takes 3 arguments])
+    AC_TRY_COMPILE([
+#include <string.h>
+#include <sys/types.h>
+#include <netdb.h>
+#undef NULL
+#define NULL (void *)0
+
+int
+gethostbyname_r(const char *, struct hostent *, struct hostent_data *);],[
+struct hostent_data data;
+gethostbyname_r(NULL, NULL, NULL);],[
+      AC_MSG_RESULT(yes)
+      AC_DEFINE(HAVE_GETHOSTBYNAME_R_3)
+      ac_cv_gethostbyname_args=3],[
+      AC_MSG_RESULT(no)
+      AC_MSG_CHECKING([if gethostbyname_r with -D_REENTRANT takes 3 arguments])
+      AC_TRY_COMPILE([
+#define _REENTRANT
+
+#include <string.h>
+#include <sys/types.h>
+#include <netdb.h>
+#undef NULL
+#define NULL (void *)0
+
+int
+gethostbyname_r(const char *,struct hostent *, struct hostent_data *);],[
+struct hostent_data data;
+gethostbyname_r(NULL, NULL, NULL);],[
+	AC_MSG_RESULT(yes)
+	AC_DEFINE(HAVE_GETHOSTBYNAME_R_3)
+	AC_DEFINE(NEED_REENTRANT)
+	ac_cv_gethostbyname_args=3],[
+	AC_MSG_RESULT(no)
+	AC_MSG_CHECKING([if gethostbyname_r takes 5 arguments])
+	AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <netdb.h>
+#undef NULL
+#define NULL (void *)0
+
+struct hostent *
+gethostbyname_r(const char *, struct hostent *, char *, int, int *);],[
+gethostbyname_r(NULL, NULL, NULL, 0, NULL);],[
+	  AC_MSG_RESULT(yes)
+	  AC_DEFINE(HAVE_GETHOSTBYNAME_R_5)
+          ac_cv_gethostbyname_args=5],[
+	  AC_MSG_RESULT(no)
+	  AC_MSG_CHECKING([if gethostbyname_r takes 6 arguments])
+	  AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <netdb.h>
+#undef NULL
+#define NULL (void *)0
+
+int
+gethostbyname_r(const char *, struct hostent *, char *, size_t,
+struct hostent **, int *);],[
+gethostbyname_r(NULL, NULL, NULL, 0, NULL, NULL);],[
+	    AC_MSG_RESULT(yes)
+	    AC_DEFINE(HAVE_GETHOSTBYNAME_R_6)
+            ac_cv_gethostbyname_args=6],[
+	    AC_MSG_RESULT(no)
+	    have_missing_r_funcs="$have_missing_r_funcs gethostbyname_r"],
+	    [ac_cv_gethostbyname_args=0])],
+	  [ac_cv_gethostbyname_args=0])],
+	[ac_cv_gethostbyname_args=0])],
+      [ac_cv_gethostbyname_args=0])])
+
+if test "$ac_cv_func_gethostbyname_r" = "yes"; then
+  if test "$ac_cv_gethostbyname_args" = "0"; then
+    dnl there's a gethostbyname_r() function, but we don't know how
+    dnl many arguments it wants!
+    AC_MSG_ERROR([couldn't figure out how to use gethostbyname_r()])
+  fi
+fi
+])
--- a/build_vms.com
+++ b/build_vms.com
@@ -0,0 +1,69 @@
+$!
+$
+$	on control_y then goto Common_Exit!
+$	orig = f$environment("DEFAULT")
+$	loc  = f$environment("PROCEDURE")
+$	def = f$parse("X.X;1",loc) - "X.X;1"
+$
+$	set def 'def'
+$	cc_qual = "/define=HAVE_CONFIG_H=1/include=(""../include/"",""../"",""../../openssl-0_9_6c/include/"")"
+$	if p1 .eqs. "LISTING" then cc_qual = cc_qual + "/LIST/MACHINE"
+$	if p1 .eqs. "DEBUG" then cc_qual = cc_qual + "/LIST/MACHINE/DEBUG"
+$	msg_qual = ""
+$	call build "[.lib]" "*.c"
+$	call build "[.src]" "*.c"
+$	call build "[.src]" "*.msg"
+$	link /exe=curl.exe [.src]curl/lib/include=main,[.lib]curl/lib, -
+		[-.openssl-0_9_6c.axp.exe.ssl]libssl/lib, -
+		[-.openssl-0_9_6c.axp.exe.crypto]libcrypto/lib
+$
+$
+$	goto Common_Exit
+$build:	subroutine
+$	set noon
+$	set default 'p1'
+$	search = p2
+$	reset = f$search("reset")
+$	if f$search("CURL.OLB") .eqs. ""
+$	then
+$		LIB/CREATE/OBJECT CURL.OLB
+$	endif
+$	reset = f$search("reset",1)
+$Loop:
+$	file = f$search(search,1)
+$	if file .eqs. "" then goto EndLoop
+$		obj = f$search(f$parse(".OBJ;",file),2)
+$		if (obj .nes. "")
+$		then
+$			if (f$cvtime(f$file(file,"rdt")) .gts. f$cvtime(f$file(obj,"rdt")))
+$			then
+$				call compile 'file'
+$				lib/object curl.OLB 'f$parse(".obj;",file)'
+$			else
+$!				write sys$output "File: ''file' is up to date"
+$			endif
+$		else
+$!			write sys$output "Object for file: ''file' does not exist"
+$			call compile 'file'
+$			lib/object curl.OLB 'f$parse(".obj;",file)'
+$		endif
+$	goto Loop
+$EndLoop:
+$	purge
+$	set def 'def'
+$	endsubroutine	! Build
+$
+$compile:	subroutine
+$	set noon
+$	file = p1
+$	qual = p2+p3+p4+p5+p6+p7+p8
+$	typ = f$parse(file,,,"TYPE") - "."
+$	cmd_c = "CC "+cc_qual
+$	cmd_msg = "MESSAGE "+msg_qual
+$	x = cmd_'typ'
+$	'x' 'file'
+$	ENDSUBROUTINE	! Compile
+$
+$Common_Exit:
+$	set default 'orig'
+$	exit
--- a/4
+++ b/4
@@ -5,9 +5,7 @@ die(){
 	exit
 }

-MAKEFILES=`find . -name Makefile.am | sed 's/\.am$//'`
-
-automake $MAKEFILES || die "The command 'automake $MAKEFILES' failed"
 aclocal           || die "The command 'aclocal' failed"
 autoheader        || die "The command 'autoheader' failed"
 autoconf          || die "The command 'autoconf' failed"
+automake -a       || die "The command 'automake $MAKEFILES' failed"
--- a/config.guess
+++ b/config.guess
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 #   Free Software Foundation, Inc.

-timestamp='2001-04-20'
+timestamp='2001-09-04'

 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -52,7 +52,7 @@ version="\
 GNU config.guess ($timestamp)

 Originally written by Per Bothner.
-Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 Free Software Foundation, Inc.

 This is free software; see the source for copying conditions.  There is NO
@@ -95,25 +95,25 @@ trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
 # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
 # use `HOST_CC' if defined, but it is deprecated.

-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int dummy(){}" > $dummy.c
+set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int dummy(){}" > $dummy.c ;
 	for c in cc gcc c89 ; do
-	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
+	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
 	  if test $? = 0 ; then
-	     CC_FOR_BUILD="$c"; break
-	  fi
-	done
-	rm -f $dummy.c $dummy.o $dummy.rel
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	rm -f $dummy.c $dummy.o $dummy.rel ;
 	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found
+	  CC_FOR_BUILD=no_compiler_found ;
 	fi
 	;;
 ,,*)   CC_FOR_BUILD=$CC ;;
 ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac
+esac'

 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
+# (ghazi@noc.rutgers.edu 1994-08-24)
 if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
 	PATH=$PATH:/.attbin ; export PATH
 fi
@@ -150,6 +150,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# to ELF recently, or will in the future.
 	case "${UNAME_MACHINE}" in
 	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
 			| grep __ELF__ >/dev/null
 		then
@@ -204,6 +205,7 @@ main:
 	jsr \$26,exit
 	.end main
 EOF
+	eval $set_cc_for_build
 	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
 	if test "$?" = 0 ; then
 		case `./$dummy` in
@@ -225,6 +227,9 @@ EOF
 			2-307)
 				UNAME_MACHINE="alphaev67"
 				;;
+			2-1307)
+				UNAME_MACHINE="alphaev68"
+				;;
 		esac
 	fi
 	rm -f $dummy.s $dummy
@@ -328,6 +333,9 @@ EOF
    aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
 	exit 0 ;;
+    sparc*:NetBSD:*)
+	echo `uname -p`-unknown-netbsd${UNAME_RELEASE}
+	exit 0 ;;
    atari*:OpenBSD:*:*)
 	echo m68k-unknown-openbsd${UNAME_RELEASE}
 	exit 0 ;;
@@ -385,6 +393,7 @@ EOF
 	echo clipper-intergraph-clix${UNAME_RELEASE}
 	exit 0 ;;
    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 #ifdef __cplusplus
 #include <stdio.h>  /* for printf() prototype */
@@ -475,6 +484,7 @@ EOF
 	exit 0 ;;
    *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
 		sed 's/^		//' << EOF >$dummy.c
 		#include <sys/systemcfg.h>

@@ -553,6 +563,7 @@ EOF
                  fi ;;
              esac
              if [ "${HP_ARCH}" = "" ]; then
+	      eval $set_cc_for_build
              sed 's/^              //' << EOF >$dummy.c

              #define _HPUX_SOURCE
@@ -586,9 +597,9 @@ EOF
                  exit (0);
              }
 EOF
-	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
-	if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
-	rm -f $dummy.c $dummy
+	    (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	    if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+	    rm -f $dummy.c $dummy
 	fi ;;
 	esac
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
@@ -598,6 +609,7 @@ EOF
 	echo ia64-hp-hpux${HPUX_REV}
 	exit 0 ;;
    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#include <unistd.h>
 	int
@@ -633,7 +645,7 @@ EOF
    9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
 	exit 0 ;;
-    *9??*:MPE/iX:*:*)
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
 	exit 0 ;;
    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
@@ -677,12 +689,13 @@ EOF
 	echo xmp-cray-unicos
        exit 0 ;;
    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE}
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
    CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
 	exit 0 ;;
    CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
@@ -763,97 +776,29 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit 0 ;;
    mips:Linux:*:*)
-	cat >$dummy.c <<EOF
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-int main (int argc, char *argv[]) {
-#else
-int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __MIPSEB__
-  printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
-  printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
+	case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in
+	  big)    echo mips-unknown-linux-gnu && exit 0 ;;
+	  little) echo mipsel-unknown-linux-gnu && exit 0 ;;
+	esac
 	;;
    ppc:Linux:*:*)
-	# Determine Lib Version
-	cat >$dummy.c <<EOF
-#include <features.h>
-#if defined(__GLIBC__)
-extern char __libc_version[];
-extern char __libc_release[];
-#endif
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#if defined(__GLIBC__)
-  printf("%s %s\n", __libc_version, __libc_release);
-#else
-  printf("unknown\n");
-#endif
-  return 0;
-}
-EOF
-	LIBC=""
-	$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		./$dummy | grep 1\.99 > /dev/null
-		if test "$?" = 0 ; then LIBC="libc1" ; fi
-	fi
-	rm -f $dummy.c $dummy
-	echo powerpc-unknown-linux-gnu${LIBC}
+	echo powerpc-unknown-linux-gnu
+	exit 0 ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
 	exit 0 ;;
    alpha:Linux:*:*)
-	cat <<EOF >$dummy.s
-	  .data
-	  \$Lformat:
-		.byte 37,100,45,37,120,10,0	# "%d-%x\n"
-	   .text
-		.globl main
-		.align 4
-		.ent main
-	    main:
-		.frame \$30,16,\$26,0
-		ldgp \$29,0(\$27)
-		.prologue 1
-		.long 0x47e03d80 # implver \$0
-		lda \$2,-1
-		.long 0x47e20c21 # amask \$2,\$1
-		lda \$16,\$Lformat
-		mov \$0,\$17
-		not \$1,\$18
-		jsr \$26,printf
-		ldgp \$29,0(\$26)
-		mov 0,\$16
-		jsr \$26,exit
-		.end main
-EOF
-	LIBC=""
-	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		case `./$dummy` in
-		0-0)	UNAME_MACHINE="alpha" ;;
-		1-0)	UNAME_MACHINE="alphaev5" ;;
-		1-1)    UNAME_MACHINE="alphaev56" ;;
-		1-101)	UNAME_MACHINE="alphapca56" ;;
-		2-303)	UNAME_MACHINE="alphaev6" ;;
-		2-307)	UNAME_MACHINE="alphaev67" ;;
-		esac
-		objdump --private-headers $dummy | \
-		  grep ld.so.1 > /dev/null
-		if test "$?" = 0 ; then
-			LIBC="libc1"
-		fi
-	fi
-	rm -f $dummy.s $dummy
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit 0 ;;
    parisc:Linux:*:* | hppa:Linux:*:*)
@@ -883,40 +828,30 @@ EOF
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
 	# problems with other programs or directories called `ld' in the path.
-	ld_supported_emulations=`cd /; ld --help 2>&1 \
-			 | sed -ne '/supported emulations:/!d
+	ld_supported_targets=`cd /; ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
 				    s/[ 	][ 	]*/ /g
-				    s/.*supported emulations: *//
+				    s/.*supported targets: *//
 				    s/ .*//
 				    p'`
-        case "$ld_supported_emulations" in
-	  i*86linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0
-		;;
-	  elf_i*86)
+        case "$ld_supported_targets" in
+	  elf32-i386)
 		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
 		;;
-	  i*86coff)
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0 ;;		
+	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0
-		;;
-	esac
-	# Either a pre-BFD a.out linker (linux-gnuoldld)
-	# or one that does not give us useful --help.
-	# GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-	# If ld does not provide *any* "supported emulations:"
-	# that means it is gnuoldld.
-	test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-	case "${UNAME_MACHINE}" in
-	i*86)
-	  VENDOR=pc;
-	  ;;
-	*)
-	  VENDOR=unknown;
-	  ;;
+		exit 0 ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit 0 ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
 	cat >$dummy.c <<EOF
 #include <features.h>
 #ifdef __cplusplus
@@ -928,15 +863,15 @@ EOF
 #ifdef __ELF__
 # ifdef __GLIBC__
 #  if __GLIBC__ >= 2
-    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+    printf ("%s-pc-linux-gnu\n", argv[1]);
 #  else
-    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+    printf ("%s-pc-linux-gnulibc1\n", argv[1]);
 #  endif
 # else
-   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+   printf ("%s-pc-linux-gnulibc1\n", argv[1]);
 # endif
 #else
-  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+  printf ("%s-pc-linux-gnuaout\n", argv[1]);
 #endif
  return 0;
 }
@@ -945,9 +880,10 @@ EOF
 	rm -f $dummy.c $dummy
 	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
 	;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
-# are messed up and put the nodename in both sysname and nodename.
    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
 	echo i386-sequent-sysv4
 	exit 0 ;;
    i*86:UNIX_SV:4.2MP:2.*)
@@ -966,14 +902,13 @@ EOF
 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
 	exit 0 ;;
-    i*86:*:5:7*)
-        # Fixed at (any) Pentium or better
-        UNAME_MACHINE=i586
-        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
-	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
-	else
-	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-	fi
+    i*86:*:5:[78]*)
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
 	exit 0 ;;
    i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
@@ -1067,8 +1002,8 @@ EOF
 		echo ns32k-sni-sysv
 	fi
 	exit 0 ;;
-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
        echo i586-unisys-sysv4
        exit 0 ;;
    *:UNIX_System_V:4*:FTX*)
@@ -1080,6 +1015,10 @@ EOF
 	# From seanf@swdc.stratus.com.
 	echo i860-stratus-sysv4
 	exit 0 ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit 0 ;;
    mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
 	exit 0 ;;
@@ -1172,11 +1111,18 @@ EOF
    *:ITS:*:*)
 	echo pdp10-unknown-its
 	exit 0 ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit 0 ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit 0 ;;
 esac

 #echo '(No uname command or uname output not recognized.)' 1>&2
 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

+eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
 # include <sys/types.h>
--- a/config.sub
+++ b/config.sub
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
 #   Free Software Foundation, Inc.

-timestamp='2001-04-20'
+timestamp='2001-09-07'

 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -117,7 +117,7 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*)
+  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
    os=-$maybe_os
    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
@@ -157,6 +157,14 @@ case $os in
 		os=-vxworks
 		basic_machine=$1
 		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
@@ -215,26 +223,36 @@ esac
 case $basic_machine in
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
-	        | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
-		| pyramid | mn10200 | mn10300 | tron | a29k \
-		| 580 | i960 | h8300 \
-		| x86 | ppcbe | mipsbe | mipsle | shbe | shle \
-		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
-		| hppa64 \
-		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
-		| alphaev6[78] \
-		| we32k | ns16k | clipper | i370 | sh | sh[34] \
-		| powerpc | powerpcle \
-		| 1750a | dsp16xx | pdp10 | pdp11 \
-		| mips16 | mips64 | mipsel | mips64el \
-		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
-		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
-		| mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \
-		| sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \
-		| v850 | c4x \
-		| thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \
-		| pj | pjl | h8500)
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| c4x | clipper \
+	| d10v | d30v | dsp16xx \
+	| fr30 \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| m32r | m68000 | m68k | m88k | mcore \
+	| mips16 | mips64 | mips64el | mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el | mips64vr4300 \
+	| mips64vr4300el | mips64vr5000 | mips64vr5000el \
+	| mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
+	| mipsisa32 \
+	| mn10200 | mn10300 \
+	| ns16k | ns32k \
+	| openrisc \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| s390 | s390x \
+	| sh | sh[34] | sh[34]eb | shbe | shle \
+	| sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
+	| stormy16 | strongarm \
+	| tahoe | thumb | tic80 | tron \
+	| v850 \
+	| we32k \
+	| x86 | xscale \
+	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
@@ -242,7 +260,7 @@ case $basic_machine in
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65)
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;

 	# We use `pc' rather than `unknown'
@@ -257,31 +275,43 @@ case $basic_machine in
 		exit 1
 		;;
 	# Recognize the basic CPU types with company name.
-	# FIXME: clean up the formatting here.
-	vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
-	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
-	      | arm-*  | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
-	      | xmp-* | ymp-* \
-	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
-	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
-	      | hppa2.0n-* | hppa64-* \
-	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
-	      | alphaev6[78]-* \
-	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
-	      | clipper-* | orion-* \
-	      | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-	      | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \
-	      | mips16-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-* \
-	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
-	      | mipstx39-* | mipstx39el-* | mcore-* \
-	      | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \
-	      | [cjt]90-* \
-	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
-	      | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \
-	      | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*)
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alphapca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armv*-* \
+	| bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c54x-* \
+	| clipper-* | cray2-* | cydra-* \
+	| d10v-* | d30v-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| m32r-* \
+	| m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | mcore-* \
+	| mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
+	| mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
+	| mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| s390-* | s390x-* \
+	| sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
+	| sparc-* | sparc64-* | sparc86x-* | sparclite-* \
+	| sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \
+	| t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
+	| v850-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \
+	| ymp-* \
+	| z8k-*)
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -727,6 +757,16 @@ case $basic_machine in
 	ppcle-* | powerpclittle-*)
 		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
+	ppc64)	basic_machine=powerpc64-unknown
+	        ;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+	        ;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	ps2)
 		basic_machine=i386-ibm
 		;;
@@ -881,6 +921,10 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	windows32)
+		basic_machine=i386-pc
+		os=-windows32-msvcrt
+		;;
 	xmp)
 		basic_machine=xmp-cray
 		os=-unicos
@@ -934,7 +978,7 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4)
+	sh3 | sh4 | sh3eb | sh4eb)
 		basic_machine=sh-unknown
 		;;
 	sparc | sparcv9 | sparcv9b)
@@ -1018,11 +1062,13 @@ case $os in
 	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*)
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1346,6 +1392,9 @@ case $basic_machine in
 			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
 				vendor=atari
 				;;
+			-vos*)
+				vendor=stratus
+				;;
 		esac
 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
 		;;
--- a/configure.in
+++ b/configure.in
@@ -1,9 +1,16 @@
 dnl $Id$
 dnl Process this file with autoconf to produce a configure script.
+
+dnl Ensure that this file is processed with autoconf 2.50 or newer
+dnl Don't even think about removing this check!
+AC_PREREQ(2.50)
+
+dnl First some basic init macros
 AC_INIT
 AC_CONFIG_SRCDIR([lib/urldata.h])
-AM_CONFIG_HEADER(config.h src/config.h)
+AM_CONFIG_HEADER(lib/config.h src/config.h tests/server/config.h lib/ca-bundle.h)

+dnl figure out the libcurl version
 VERSION=`sed -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curl.h`
 AM_INIT_AUTOMAKE(curl,$VERSION)

@@ -38,6 +45,10 @@ AC_PROG_CC
 dnl check for how to do large files
 AC_SYS_LARGEFILE

+dnl check for cygwin stuff
+AC_LIBTOOL_WIN32_DLL
+
+dnl libtool setup
 AM_PROG_LIBTOOL

 dnl The install stuff has already been taken care of by the automake stuff
@@ -45,287 +56,118 @@ dnl AC_PROG_INSTALL
 AC_PROG_MAKE_SET

 dnl ************************************************************
-dnl lame option to switch on debug options
+dnl switch off particular protocols
 dnl
-AC_MSG_CHECKING([whether to enable debug options])
-AC_ARG_ENABLE(debug,
-[  --enable-debug		Enable pedantic debug options
-  --disable-debug		Disable debug options],
+AC_MSG_CHECKING([whether to support http])
+AC_ARG_ENABLE(http,
+[  --enable-http		Enable HTTP support
+  --disable-http	Disable HTTP support],
 [ case "$enableval" in
  no)
       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_HTTP)
+       AC_MSG_WARN([disable HTTP disables FTP over proxy and GOPHER too])
+       AC_DEFINE(CURL_DISABLE_GOPHER)
+       AC_SUBST(CURL_DISABLE_HTTP)
+       AC_SUBST(CURL_DISABLE_GOPHER)
       ;;
  *)   AC_MSG_RESULT(yes)
-
-    CPPFLAGS="$CPPFLAGS -DMALLOCDEBUG"
-    CFLAGS="-Wall -pedantic -g" 
       ;;
  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support ftp])
+AC_ARG_ENABLE(ftp,
+[  --enable-ftp		Enable FTP support
+  --disable-ftp	Disable FTP support],
+[ case "$enableval" in
+  no)
       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_FTP)
+       AC_SUBST(CURL_DISABLE_FTP)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support gopher])
+AC_ARG_ENABLE(gopher,
+[  --enable-gopher		Enable GOPHER support
+  --disable-gopher	Disable GOPHER support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_GOPHER)
+       AC_SUBST(CURL_DISABLE_GOPHER)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support file])
+AC_ARG_ENABLE(file,
+[  --enable-file		Enable FILE support
+  --disable-file	Disable FILE support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_FILE)
+       AC_SUBST(CURL_DISABLE_FILE)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support ldap])
+AC_ARG_ENABLE(ldap,
+[  --enable-ldap		Enable LDAP support
+  --disable-ldap	Disable LDAP support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_LDAP)
+       AC_SUBST(CURL_DISABLE_LDAP)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support dict])
+AC_ARG_ENABLE(dict,
+[  --enable-dict		Enable DICT support
+  --disable-dict	Disable DICT support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_DICT)
+       AC_SUBST(CURL_DISABLE_DICT)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
+)
+AC_MSG_CHECKING([whether to support telnet])
+AC_ARG_ENABLE(telnet,
+[  --enable-telnet		Enable TELNET support
+  --disable-telnet	Disable TELNET support],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       AC_DEFINE(CURL_DISABLE_TELNET)
+       AC_SUBST(CURL_DISABLE_TELNET)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+       ;;
+  esac ],
+       AC_MSG_RESULT(yes)
 )


-dnl
-dnl check for working getaddrinfo()
-dnl
-AC_DEFUN(CURL_CHECK_WORKING_GETADDRINFO,[
-  AC_CACHE_CHECK(for working getaddrinfo, ac_cv_working_getaddrinfo,[
-  AC_TRY_RUN( [
-#include <netdb.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-
-void main(void) {
-    struct addrinfo hints, *ai;
-    int error;
-
-    memset(&hints, 0, sizeof(hints));
-    hints.ai_family = AF_UNSPEC;
-    hints.ai_socktype = SOCK_STREAM;
-    error = getaddrinfo("127.0.0.1", "8080", &hints, &ai);
-    if (error) {
-        exit(1);
-    }
-    else {
-        exit(0);
-    }
-}
-],[
-  ac_cv_working_getaddrinfo="yes"
-],[
-  ac_cv_working_getaddrinfo="no"
-],[
-  ac_cv_working_getaddrinfo="yes"
-])])
-if test "$ac_cv_working_getaddrinfo" = "yes"; then
-  AC_DEFINE(HAVE_GETADDRINFO, 1, [Define if getaddrinfo exists and works])
-  AC_DEFINE(ENABLE_IPV6, 1, [Define if you want to enable IPv6 support])
-
-  IPV6_ENABLED=1
-  AC_SUBST(IPV6_ENABLED)
-fi
-])
-
-
-AC_DEFUN(CURL_CHECK_LOCALTIME_R,
-[
-  dnl check for a few thread-safe functions
-  AC_CHECK_FUNCS(localtime_r,[
-    AC_MSG_CHECKING(whether localtime_r is declared)
-    AC_EGREP_CPP(localtime_r,[
-#include <time.h>],[
-      AC_MSG_RESULT(yes)],[
-      AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(whether localtime_r with -D_REENTRANT is declared)
-      AC_EGREP_CPP(localtime_r,[
-#define _REENTRANT
-#include <time.h>],[
-	AC_DEFINE(NEED_REENTRANT)
-	AC_MSG_RESULT(yes)],
-	AC_MSG_RESULT(no))])])
-])
-
-AC_DEFUN(CURL_CHECK_INET_NTOA_R,
-[
-  dnl determine if function definition for inet_ntoa_r exists.
-  AC_CHECK_FUNCS(inet_ntoa_r,[
-    AC_MSG_CHECKING(whether inet_ntoa_r is declared)
-    AC_EGREP_CPP(inet_ntoa_r,[
-#include <arpa/inet.h>],[
-      AC_DEFINE(HAVE_INET_NTOA_R_DECL)
-      AC_MSG_RESULT(yes)],[
-      AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(whether inet_ntoa_r with -D_REENTRANT is declared)
-      AC_EGREP_CPP(inet_ntoa_r,[
-#define _REENTRANT
-#include <arpa/inet.h>],[
-	AC_DEFINE(HAVE_INET_NTOA_R_DECL)
-	AC_DEFINE(NEED_REENTRANT)
-	AC_MSG_RESULT(yes)],
-	AC_MSG_RESULT(no))])])
-
-])
-
-AC_DEFUN(CURL_CHECK_GETHOSTBYADDR_R,
-[
-  dnl check for number of arguments to gethostbyaddr_r. it might take
-  dnl either 5, 7, or 8 arguments.
-  AC_CHECK_FUNCS(gethostbyaddr_r,[
-    AC_MSG_CHECKING(if gethostbyaddr_r takes 5 arguments)
-    AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <netdb.h>],[
-char * address;
-int length;
-int type;
-struct hostent h;
-struct hostent_data hdata;
-int rc;
-rc = gethostbyaddr_r(address, length, type, &h, &hdata);],[
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_GETHOSTBYADDR_R_5)
-      ac_cv_gethostbyaddr_args=5],[
-      AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(if gethostbyaddr_r with -D_REENTRANT takes 5 arguments)
-      AC_TRY_COMPILE([
-#define _REENTRANT
-#include <sys/types.h>
-#include <netdb.h>],[
-char * address;
-int length;
-int type;
-struct hostent h;
-struct hostent_data hdata;
-int rc;
-rc = gethostbyaddr_r(address, length, type, &h, &hdata);],[
-	AC_MSG_RESULT(yes)
-	AC_DEFINE(HAVE_GETHOSTBYADDR_R_5)
-	AC_DEFINE(NEED_REENTRANT)
-	ac_cv_gethostbyaddr_args=5],[
-	AC_MSG_RESULT(no)
-	AC_MSG_CHECKING(if gethostbyaddr_r takes 7 arguments)
-	AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <netdb.h>],[
-char * address;
-int length;
-int type;
-struct hostent h;
-char buffer[8192];
-int h_errnop;
-struct hostent * hp;
-
-hp = gethostbyaddr_r(address, length, type, &h,
-                     buffer, 8192, &h_errnop);],[
-	  AC_MSG_RESULT(yes)
-	  AC_DEFINE(HAVE_GETHOSTBYADDR_R_7)
-	  ac_cv_gethostbyaddr_args=7],[
-	  AC_MSG_RESULT(no)
-	  AC_MSG_CHECKING(if gethostbyaddr_r takes 8 arguments)
-	  AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <netdb.h>],[
-char * address;
-int length;
-int type;
-struct hostent h;
-char buffer[8192];
-int h_errnop;
-struct hostent * hp;
-int rc;
-
-rc = gethostbyaddr_r(address, length, type, &h,
-                     buffer, 8192, &hp, &h_errnop);],[
-	    AC_MSG_RESULT(yes)
-	    AC_DEFINE(HAVE_GETHOSTBYADDR_R_8)
-	    ac_cv_gethostbyaddr_args=8],[
-	    AC_MSG_RESULT(no)
-	    have_missing_r_funcs="$have_missing_r_funcs gethostbyaddr_r"])])])])])
-
-
-])
-
-AC_DEFUN(CURL_CHECK_GETHOSTBYNAME_R,
-[
-  dnl check for number of arguments to gethostbyname_r. it might take
-  dnl either 3, 5, or 6 arguments.
-  AC_CHECK_FUNCS(gethostbyname_r,[
-    AC_MSG_CHECKING(if gethostbyname_r takes 3 arguments)
-    AC_TRY_RUN([
-#include <string.h>
-#include <sys/types.h>
-#include <netdb.h>
-
-int
-main () {
-struct hostent h;
-struct hostent_data hdata;
-char *name = "localhost";
-int rc;
-memset(&h, 0, sizeof(struct hostent));
-memset(&hdata, 0, sizeof(struct hostent_data));
-rc = gethostbyname_r(name, &h, &hdata);
-exit (rc != 0 ? 1 : 0); }],[
-      AC_MSG_RESULT(yes)
-      AC_DEFINE(HAVE_GETHOSTBYNAME_R_3)
-      ac_cv_gethostbyname_args=3],[
-      AC_MSG_RESULT(no)
-      AC_MSG_CHECKING(if gethostbyname_r with -D_REENTRANT takes 3 arguments)
-      AC_TRY_RUN([
-#define _REENTRANT
-
-#include <string.h>
-#include <sys/types.h>
-#include <netdb.h>
-
-int
-main () {
-struct hostent h;
-struct hostent_data hdata;
-char *name = "localhost";
-int rc;
-memset(&h, 0, sizeof(struct hostent));
-memset(&hdata, 0, sizeof(struct hostent_data));
-rc = gethostbyname_r(name, &h, &hdata);
-exit (rc != 0 ? 1 : 0); }],[
-	AC_MSG_RESULT(yes)
-	AC_DEFINE(HAVE_GETHOSTBYNAME_R_3)
-	AC_DEFINE(NEED_REENTRANT)
-	ac_cv_gethostbyname_args=3],[
-	AC_MSG_RESULT(no)
-	AC_MSG_CHECKING(if gethostbyname_r takes 5 arguments)
-	AC_TRY_RUN([
-#include <sys/types.h>
-#include <netdb.h>
-
-int
-main () {
-struct hostent *hp;
-struct hostent h;
-char *name = "localhost";
-char buffer[8192];
-int h_errno;
-hp = gethostbyname_r(name, &h, buffer, 8192, &h_errno);
-exit (hp == NULL ? 1 : 0); }],[
-	  AC_MSG_RESULT(yes)
-	  AC_DEFINE(HAVE_GETHOSTBYNAME_R_5)
-          ac_cv_gethostbyname_args=5],[
-	  AC_MSG_RESULT(no)
-	  AC_MSG_CHECKING(if gethostbyname_r takes 6 arguments)
-	  AC_TRY_RUN([
-#include <sys/types.h>
-#include <netdb.h>
-
-int
-main () {
-struct hostent h;
-struct hostent *hp;
-char *name = "localhost";
-char buf[8192];
-int rc;
-int h_errno;
-rc = gethostbyname_r(name, &h, buf, 8192, &hp, &h_errno);
-exit (rc != 0 ? 1 : 0); }],[
-	    AC_MSG_RESULT(yes)
-	    AC_DEFINE(HAVE_GETHOSTBYNAME_R_6)
-            ac_cv_gethostbyname_args=6],[
-	    AC_MSG_RESULT(no)
-	    have_missing_r_funcs="$have_missing_r_funcs gethostbyname_r"],
-	    [ac_cv_gethostbyname_args=0])],
-	  [ac_cv_gethostbyname_args=0])],
-	[ac_cv_gethostbyname_args=0])],
-      [ac_cv_gethostbyname_args=0])])
-
-if test "$ac_cv_func_gethostbyname_r" = "yes"; then
-  if test "$ac_cv_gethostbyname_args" = "0"; then
-    dnl there's a gethostbyname_r() function, but we don't know how
-    dnl many arguments it wants!
-    AC_MSG_ERROR([couldn't figure out how to use gethostbyname_r()])
-  fi
-fi
-
-])
-
 dnl **********************************************************************
 dnl Checks for IPv6
 dnl **********************************************************************
@@ -333,7 +175,7 @@ dnl **********************************************************************
 AC_MSG_CHECKING([whether to enable ipv6])
 AC_ARG_ENABLE(ipv6,
 [  --enable-ipv6		Enable ipv6 (with ipv4) support
-  --disable-ipv6		Disable ipv6 support],
+  --disable-ipv6	Disable ipv6 support],
 [ case "$enableval" in
  no)
       AC_MSG_RESULT(no)
@@ -414,12 +256,27 @@ fi
 dnl socket lib?
 AC_CHECK_FUNC(connect, , AC_CHECK_LIB(socket, connect))

-dnl ucb lib?
-AC_CHECK_FUNC(gethostname, , AC_CHECK_LIB(ucb, gethostname))
-
 dnl dl lib?
 AC_CHECK_FUNC(dlclose, , AC_CHECK_LIB(dl, dlopen))

+dnl **********************************************************************
+dnl Check how non-blocking sockets are set
+dnl **********************************************************************
+AC_ARG_ENABLE(nonblocking,
+[  --enable-nonblocking  Makes the script detect how to do it
+  --disable-nonblocking Makes the script disable non-blocking sockets],
+[
+  if test "$enableval" = "no" ; then
+    AC_MSG_WARN([non-blocking sockets disabled])
+    AC_DEFINE(HAVE_DISABLED_NONBLOCKING)
+  else
+    CURL_CHECK_NONBLOCKING_SOCKET
+  fi
+],
+[
+  CURL_CHECK_NONBLOCKING_SOCKET
+])
+
 dnl **********************************************************************
 dnl Check for the random seed preferences 
 dnl **********************************************************************
@@ -559,13 +416,22 @@ then
 else

  dnl Check for and handle argument to --with-ssl.
-  EXTRA_SSL=
+
+  dnl save the pre-ssl check flags for a while
+  CLEANLDFLAGS="$LDFLAGS"
+  CLEANCPPFLAGS="$CPPFLAGS"

  case "$OPT_SSL" in
  yes)
    EXTRA_SSL=/usr/local/ssl ;;
+  off)
+    EXTRA_SSL= ;;
  *)
-    EXTRA_SSL=$OPT_SSL ;;
+    dnl check the given spot right away!
+    EXTRA_SSL=$OPT_SSL
+    LDFLAGS="$LDFLAGS -L$EXTRA_SSL/lib"
+    CPPFLAGS="$CPPFLAGS -I$EXTRA_SSL/include/openssl -I$EXTRA_SSL/include"
+    ;;
  esac

  AC_CHECK_LIB(crypto, CRYPTO_lock,[
@@ -573,8 +439,8 @@ else
     ],[
     OLDLDFLAGS="$LDFLAGS"
     OLDCPPFLAGS="$CPPFLAGS"
-     LDFLAGS="$LDFLAGS -L$EXTRA_SSL/lib"
-     CPPFLAGS="$CPPFLAGS -I$EXTRA_SSL/include/openssl -I$EXTRA_SSL/include"
+     LDFLAGS="$CLEANLDFLAGS -L$EXTRA_SSL/lib"
+     CPPFLAGS="$CLEANCPPFLAGS -I$EXTRA_SSL/include/openssl -I$EXTRA_SSL/include"
     AC_CHECK_LIB(crypto, CRYPTO_add_lock,[
       HAVECRYPTO="yes" ], [
       LDFLAGS="$OLDLDFLAGS"
@@ -616,6 +482,10 @@ else
        OPENSSL_ENABLED=1)
    fi

+    dnl Check for the OpenSSL engine header, it is kind of "separated"
+    dnl from the main SSL check
+    AC_CHECK_HEADERS(openssl/engine.h)
+
    AC_SUBST(OPENSSL_ENABLED)

  fi
@@ -652,20 +522,23 @@ dnl NOTE:  We *always* look for ZLIB headers & libraries, all this option
 dnl        does is change where we look (by adjusting LIBS and CPPFLAGS.)
 dnl

-dnl AC_MSG_CHECKING(where to look for ZLIB)
-dnl if test X"$OPT_ZLIB" = Xno
-dnl then
-dnl 	AC_MSG_RESULT([defaults (or given in environment)])
-dnl else
-dnl	test X"$OPT_ZLIB" = Xyes && OPT_ZLIB=/usr/local
-dnl	LIBS="$LIBS -L$OPT_ZLIB/lib"
-dnl	CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
-dnl	AC_MSG_RESULT([$OPT_ZLIB])
-dnl fi
+AC_MSG_CHECKING(where to look for ZLIB)
+if test X"$OPT_ZLIB" = Xno
+then
+	AC_MSG_RESULT([defaults (or given in environment)])
+else
+	test X"$OPT_ZLIB" = Xyes && OPT_ZLIB=/usr/local
+	LIBS="$LIBS -L$OPT_ZLIB/lib"
+	CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
+	AC_MSG_RESULT([$OPT_ZLIB])
+fi

-dnl z lib?
 dnl AC_CHECK_FUNC(gzread, , AC_CHECK_LIB(z, gzread))
-
+AC_CHECK_LIB(z, gzread, [AM_CONDITIONAL(CONTENT_ENCODING, true) 
+		         AC_DEFINE(HAVE_LIBZ)
+			 LIBS="$LIBS -lz"
+                         HAVE_LIBZ="1"
+                         AC_SUBST(HAVE_LIBZ)])

 dnl Default is to try the thread-safe versions of a few functions
 OPT_THREAD=on
@@ -693,6 +566,8 @@ else
  dnl is there a localtime_r()
  CURL_CHECK_LOCALTIME_R()

+  AC_CHECK_FUNCS( gmtime_r )
+
 fi

 dnl **********************************************************************
@@ -716,7 +591,6 @@ AC_CHECK_HEADERS( \
        sys/stat.h \
        sys/types.h \
        sys/time.h \
-        getopt.h \
        sys/param.h \
        termios.h \
        termio.h \
@@ -727,11 +601,15 @@ AC_CHECK_HEADERS( \
        winsock.h \
        time.h \
        io.h \
-        pwd.h
+        pwd.h \
+        utime.h \
+        sys/utime.h \
+        sys/poll.h \
+        setjmp.h
 )

 dnl Check for libz header
-dnl AC_CHECK_HEADERS(zlib.h)
+AC_CHECK_HEADERS(zlib.h)

 dnl Checks for typedefs, structures, and compiler characteristics.
 AC_C_CONST
@@ -741,33 +619,15 @@ AC_HEADER_TIME
 # mprintf() checks:

 # check for 'long double'
-AC_CHECK_SIZEOF(long double, 8)
+# AC_CHECK_SIZEOF(long double, 8)
 # check for 'long long'
-AC_CHECK_SIZEOF(long long, 4)
+# AC_CHECK_SIZEOF(long long, 4)

 # check for ssize_t
 AC_CHECK_TYPE(ssize_t, int)

-dnl
-dnl We can't just AC_CHECK_TYPE() for socklen_t since it doesn't appear
-dnl in the standard headers. We egrep for it in the socket headers and
-dnl if it is used there we assume we have the type defined, otherwise
-dnl we search for it with AC_CHECK_TYPE() the "normal" way
-dnl
-
-if test "$ac_cv_header_sys_socket_h" = "yes"; then
-   AC_MSG_CHECKING(for socklen_t in sys/socket.h)
-   AC_EGREP_HEADER(socklen_t,
-    sys/socket.h,
-    socklen_t=yes
-    AC_MSG_RESULT(yes),
-    AC_MSG_RESULT(no))
-fi
-
-if test "$socklen_t" != "yes"; then
-  # check for socklen_t the standard way if it wasn't found before
-  AC_CHECK_TYPE(socklen_t, int)
-fi
+TYPE_SOCKLEN_T
+TYPE_IN_ADDR_T

 dnl Checks for library functions.
 dnl AC_PROG_GCC_TRADITIONAL
@@ -783,9 +643,7 @@ AC_CHECK_FUNCS( socket \
                strcasecmp \
                stricmp \
                strcmpi \
-                gethostname \
                gethostbyaddr \
-                getservbyname \
                gettimeofday \
                inet_addr \
                inet_ntoa \
@@ -800,9 +658,25 @@ AC_CHECK_FUNCS( socket \
                strlcat \
                getpwuid \
                geteuid \
-                dlopen
+                dlopen \
+                utime \
+                sigsetjmp \
+                poll
 )

+dnl sigsetjmp() might be a macro and no function so if it isn't found already
+dnl we make an extra check here!
+if test "$ac_cv_func_sigsetjmp" != "yes"; then
+  AC_MSG_CHECKING([for sigsetjmp defined as macro])
+  AC_TRY_LINK( [#include <setjmp.h>],
+               [sigjmp_buf jmpenv;
+                sigsetjmp(jmpenv, 1);],
+               AC_MSG_RESULT(yes)
+               AC_DEFINE(HAVE_SIGSETJMP),
+               AC_MSG_RESULT(no)
+               )
+fi
+
 dnl removed 'getpass' check on October 26, 2000

 if test "$ac_cv_func_select" != "yes"; then
@@ -820,32 +694,79 @@ AC_PATH_PROGS( NROFF, gnroff nroff, ,
  $PATH:/usr/bin/:/usr/local/bin )
 AC_SUBST(NROFF)

+
+AC_MSG_CHECKING([CA cert bundle install path])
+
+AC_ARG_WITH(ca-bundle,
+AC_HELP_STRING([--with-ca-bundle=FILE], [File name to install the CA bundle as])
+AC_HELP_STRING([--without-ca-bundle], [Don't install the CA bundle]),
+   [ ca="$withval" ],
+   [
+  if test "x$prefix" != xNONE; then
+    ca="$prefix/share/curl/curl-ca-bundle.crt"
+  else
+    ca="$ac_default_prefix/share/curl/curl-ca-bundle.crt"
+  fi
+   ] )
+
+if test "x$ca" = "xno"; then
+  dnl let's not keep "no" as path name, blank it instead
+  ca=""
+else
+  AC_DEFINE_UNQUOTED(CURL_CA_BUNDLE, "$ca", [CA bundle full path name])
+fi
+
+CURL_CA_BUNDLE="$ca"
+AC_SUBST(CURL_CA_BUNDLE)
+AC_MSG_RESULT([$ca])
+
 AC_PROG_YACC

 dnl AC_PATH_PROG( RANLIB, ranlib, /usr/bin/ranlib, 
 dnl   $PATH:/usr/bin/:/usr/local/bin )
 dnl AC_SUBST(RANLIB)

+dnl ************************************************************
+dnl lame option to switch on debug options
+dnl
+AC_MSG_CHECKING([whether to enable debug options])
+AC_ARG_ENABLE(debug,
+[  --enable-debug	Enable pedantic debug options
+  --disable-debug	Disable debug options],
+[ case "$enableval" in
+  no)
+       AC_MSG_RESULT(no)
+       ;;
+  *)   AC_MSG_RESULT(yes)
+
+    CPPFLAGS="$CPPFLAGS -DMALLOCDEBUG"
+    CFLAGS="-W -Wall -Wwrite-strings -pedantic -Wundef -Wpointer-arith -Wcast-align -Wnested-externs -g" 
+       ;;
+  esac ],
+       AC_MSG_RESULT(no)
+)
+
 AC_CONFIG_FILES([Makefile \
 	   docs/Makefile \
           docs/examples/Makefile \
+           docs/libcurl/Makefile \
 	   include/Makefile \
 	   include/curl/Makefile \
 	   src/Makefile \
           lib/Makefile \
           tests/Makefile \
           tests/data/Makefile \
+           tests/server/Makefile \
 	   packages/Makefile \
 	   packages/Win32/Makefile \
+	   packages/Win32/cygwin/Makefile \
 	   packages/Linux/Makefile \
 	   packages/Linux/RPM/Makefile \
 	   packages/Linux/RPM/curl.spec \
 	   packages/Linux/RPM/curl-ssl.spec \
           packages/Solaris/Makefile \
-           perl/Makefile \
-           perl/Curl_easy/Makefile \
-           php/Makefile \
-           php/examples/Makefile \
+           packages/EPM/curl.list \
+           packages/EPM/Makefile \
           curl-config
 ])
 AC_OUTPUT
--- a/curl-config.in
+++ b/curl-config.in
@@ -16,6 +16,8 @@ Usage: curl-config [OPTION]

 Available values for OPTION include:

+  --ca        ca bundle install path
+  --cc        compiler
  --cflags    pre-processor and compiler flags
  --feature   newline separated list of enabled features
  --help      display this help and exit
@@ -42,6 +44,14 @@ while test $# -gt 0; do
    esac

    case "$1" in
+    --ca)
+	echo @CURL_CA_BUNDLE@
+	;;
+
+    --cc)
+	echo @CC@
+	;;
+
    --prefix)
 	echo $prefix
 	;;
@@ -56,6 +66,30 @@ while test $# -gt 0; do
 	if test "@IPV6_ENABLED@" = "1"; then
          echo "IPv6"
        fi
+	if test "@HAVE_LIBZ@" = "1"; then
+          echo "libz"
+        fi
+	if test "@CURL_DISABLE_HTTP@" = "1"; then
+          echo "HTTP-disabled"
+        fi
+	if test "@CURL_DISABLE_FTP@" = "1"; then
+          echo "FTP-disabled"
+        fi
+	if test "@CURL_DISABLE_GOPHER@" = "1"; then
+          echo "GOPHER-disabled"
+        fi
+	if test "@CURL_DISABLE_FILE@" = "1"; then
+          echo "FILE-disabled"
+        fi
+	if test "@CURL_DISABLE_TELNET@" = "1"; then
+          echo "TELNET-disabled"
+        fi
+	if test "@CURL_DISABLE_LDAP@" = "1"; then
+          echo "LDAP-disabled"
+        fi
+	if test "@CURL_DISABLE_DICT@" = "1"; then
+          echo "DICT-disabled"
+        fi
 	;;

    --version)
@@ -73,14 +107,15 @@ while test $# -gt 0; do
 	;;

    --cflags)
-       	echo @CPPFLAGS@
+       	echo -I@includedir@
       	;;

    --libs)
-       	echo @LDFLAGS@ @LIBS@
+       	echo -L@libdir@ -lcurl @LDFLAGS@ @LIBS@
       	;;

    *)
+        echo "unknown option: $1"
 	usage
 	exit 1
 	;;
--- a/curl-mode.el
+++ b/curl-mode.el
@@ -0,0 +1,21 @@
+;;;; Emacs Lisp help for writing curl code. ;;;;
+
+;;; In C files, put something like this to load this file automatically:
+;;
+;;   /* -----------------------------------------------------------------
+;;    * local variables:
+;;    * eval: (load-file "../curl-mode.el")
+;;    * end:
+;;    */
+;;
+;; (note: make sure to get the path right in the argument to load-file).
+
+
+;;; The curl hacker's C conventions
+
+;;; we use intent-level 2
+(setq c-basic-offset 2)
+;;; never ever use tabs to indent!
+(setq indent-tabs-mode nil)
+;;; I like this, stolen from Subversion! ;-)
+(setq angry-mob-with-torches-and-pitchforks t)
--- a/docs/.cvsignore
+++ b/docs/.cvsignore
@@ -0,0 +1,3 @@
+Makefile
+Makefile.in
+*html
--- a/docs/BINDINGS
+++ b/docs/BINDINGS
@@ -0,0 +1,96 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+                               libcurl bindings
+
+Creative people have written particular bindings or interfaces for various
+environments and programming languages. Using one of these allows you to take
+advantage of curl powers from within your favourite language or system.
+
+This is a list of all known interfaces as of this writing.
+
+The bindings listed below are not part of the curl/libcurl distribution
+archives, but must be downloaded and installed separately.
+
+Basic
+
+  ScriptBasic bindings to libcurl. Writtten by Peter Verhas.
+  http://scriptbasic.com/
+
+C++
+
+  Maintained by Jean-Philippe Barrette-LaPierre.
+  http://curl.haxx.se/libcurl/cplusplus/
+
+Cocoa
+
+  Written by Dan Wood.
+  http://curlhandle.sourceforge.net/
+
+Dylan
+
+  Written by Chris Double.
+  http://dylanlibs.sourceforge.net/
+
+Java
+
+  Written by Daniel Stenberg.
+  http://curl.haxx.se/libcurl/java/
+
+Lua
+
+  Written by Steve Dekorte.
+  http://curl.haxx.se/libcurl/lua/
+
+Object-Pascal
+
+  Free Pascal, Delphi and Kylix binding written by Christophe Espern.
+  http://www.tekool.com/opcurl
+
+Pascal
+
+  Free Pascal, Delphi and Kylix binding written by Jeffrey Pohlmeyer.
+  http://houston.quik.com/jkp/curlpas/
+
+Perl
+
+  Maintained by Cris Bailiff.
+  http://curl.haxx.se/libcurl/perl/
+
+PHP
+
+  Written by Sterling Hughes.
+  http://curl.haxx.se/libcurl/php/
+
+PostgreSQL
+
+  Written by Gian Paolo Ciceri.
+  http://gborg.postgresql.org/project/pgcurl/projdisplay.php
+
+Python
+
+  Written by Kjetil Jacobsen.
+  http://pycurl.sourceforge.net/
+
+Rexx
+
+  Written Mark Hessling. 
+  http://rexxcurl.sourceforge.net/
+
+Ruby
+
+  Written by Hirotaka Matsuyuki. 
+  http://www.d1.dion.ne.jp/~matuyuki/ruby.html
+
+Scheme
+
+  Bigloo binding written by Kirill Lisovsky.
+  http://curl.haxx.se/libcurl/scheme/
+
+Tcl
+
+  Written by Andr<64>s Garc<72>a. 
+  http://personal1.iddeo.es/andresgarci/tclcurl/english/docs.html
--- a/docs/BUGS
+++ b/docs/BUGS
@@ -1,3 +1,4 @@
+$Id$
                                  _   _ ____  _     
                              ___| | | |  _ \| |    
                             / __| | | | |_) | |    
@@ -7,25 +8,46 @@
 BUGS

  Curl and libcurl have grown substantially since the beginning. At the time
-  of writing (mid March 2001), there are 23000 lines of source code, and by
+  of writing (end of April 2002), there are 32000 lines of source code, and by
  the time you read this it has probably grown even more.

  Of course there are lots of bugs left. And lots of misfeatures.

  To help us make curl the stable and solid product we want it to be, we need
-  bug reports and bug fixes. If you can't fix a bug yourself and submit a fix
-  for it, try to report an as detailed report as possible to the curl mailing
-  list to allow one of us to have a go at a solution. You should also post
-  your bug/problem at curl's bug tracking system over at
+  bug reports and bug fixes.
+
+WHERE TO REPORT
+
+  If you can't fix a bug yourself and submit a fix for it, try to report an as
+  detailed report as possible to the curl mailing list to allow one of us to
+  have a go at a solution. You should also post your bug/problem at curl's bug
+  tracking system over at

        http://sourceforge.net/bugs/?group_id=976

+  (but please read the section below first before doing that)
+
+WHAT TO REPORT
+
  When reporting a bug, you should include information that will help us
-  understand what's wrong, what you expected to happen and how to repeat the
-  bad behaviour. You therefore need to supply your operating system's name and
-  version number (uname -a under a unix is fine), what version of curl you're
-  using (curl -V is fine), what URL you were working with and anything else
-  you think matters.
+  understand what's wrong what you expected to happen and how to repeat the
+  bad behavior. You therefore need to tell us:
+
+   - your operating system's name and version number (uname -a under a unix
+     is fine)
+   - what version of curl you're using (curl -V is fine)
+   - what URL you were working with (if possible), at least which protocol
+
+  and anything and everything else you think matters. Tell us what you
+  expected to happen, tell use what did happen, tell us how you could make it
+  work another way. Dig around, try out, test. Then include all the tiny bits
+  and pieces in your report. You will benefit from this yourself, as it will
+  enable us to help you quicker and more accurately.
+
+  Since curl deals with networks, it often helps us if you include a protocol
+  debug dump with your bug report. The output you get by using the -v
+  flag. Usually, you also get more info by using -i so that is likely to be
+  useful when reporting bugs as well.

  If curl crashed, causing a core dump (in unix), there is hardly any use to
  send that huge file to anyone of us. Unless we have an exact same system
@@ -35,23 +57,23 @@ BUGS
  The address and how to subscribe to the mailing list is detailed in the
  MANUAL file.

-  HOW TO GET A STACK TRACE with a common unix debugger
-  ====================================================
+HOW TO GET A STACK TRACE

  First, you must make sure that you compile all sources with -g and that you
-  don't 'strip' the final executable.
+  don't 'strip' the final executable. Try to avoid optimizing the code as
+  well, remove -O, -O2 etc from the compiler options.

-  Run the program until it bangs.
+  Run the program until it dumps core.

  Run your debugger on the core file, like '<debugger> curl core'. <debugger>
  should be replaced with the name of your debugger, in most cases that will
  be 'gdb', but 'dbx' and others also occur.

  When the debugger has finished loading the core file and presents you a
-  prompt, you can give the compiler instructions. Enter 'where' (without the
-  quotes) and press return.
+  prompt, enter 'where' (without the quotes) and press return.

  The list that is presented is the stack trace. If everything worked, it is
  supposed to contain the chain of functions that were called when curl
-  crashed.
+  crashed. Include the stack trace with your detailed bug report. It'll help a
+  lot.

--- a/docs/CONTRIBUTE
+++ b/docs/CONTRIBUTE
@@ -10,6 +10,12 @@ To Think About When Contributing Source Code
 in mind when you decide to write a contribution to the project. This concerns
 new features as well as corrections to existing flaws or bugs.

+Join the Community
+
+ Skip over to http://curl.haxx.se/mail/ and join the appropriate mailing
+ list(s).  Read up on details before you post questions. Read this file before
+ you start sending patches!
+
 The License Issue

 When contributing with code, you agree to put your changes and new code under
@@ -21,6 +27,12 @@ The License Issue
 GPL (as we don't want the GPL virus to attack users of libcurl) but they must
 use "GPL compatible" licenses.

+What To Read
+
+ Source code, the man pages, the INTERALS document, the TODO, the most recent
+ CHANGES. Just lurking on the libcurl mailing list is gonna give you a lot of
+ insights on what's going on right now.
+
 Naming

 Try using a non-confusing naming scheme for your new functions and variable
@@ -87,7 +99,9 @@ Write Access to CVS Repository
 If you are a frequent contributor, or have another good reason, you can of
 course get write access to the CVS repository and then you'll be able to
 check-in all your changes straight into the CVS tree instead of sending all
- changes by mail as patches. Just ask if this is what you'd want.
+ changes by mail as patches. Just ask if this is what you'd want. You will be
+ required to have posted a few quality patches first, before you can be
+ granted write access.

 Test Cases

--- a/docs/FAQ
+++ b/docs/FAQ
@@ -1,4 +1,4 @@
-Updated: May 29, 2001 (http://curl.haxx.se/docs/faq.shtml)
+Updated: September 3, 2002 (http://curl.haxx.se/docs/faq.html)
                                  _   _ ____  _     
                              ___| | | |  _ \| |    
                             / __| | | | |_) | |    
@@ -14,6 +14,8 @@ FAQ
  1.4 When will you make curl do XXXX ?
  1.5 Who makes cURL?
  1.6 What do you get for making cURL?
+  1.7 What about CURL from curl.com?
+  1.8 I have a problem who do I mail?

 2. Install Related Problems
  2.1 configure doesn't find OpenSSL even when it is installed
@@ -29,12 +31,15 @@ FAQ
  3.3 Why doesn't my posting using -F work?
  3.4 How do I tell curl to run custom FTP commands?
  3.5 How can I disable the Pragma: nocache header?
-  3.6 Does curl support javascript, ASP, XML, XHTML or HTML version Y?
+  3.6 Does curl support ASP, XML, XHTML or HTML version Y?
  3.7 Can I use curl to delete/rename a file through FTP?
  3.8 How do I tell curl to follow HTTP redirects?
-  3.9 How do I use curl in PHP, Perl, Tcl, Ruby or Java?
+  3.9 How do I use curl in my favorite programming language?
  3.10 What about SOAP, WebDAV, XML-RPC or similar protocols over HTTP?
  3.11 How do I POST with a different Content-Type?
+  3.12 Why do FTP specific features over HTTP proxy fail?
+  3.13 Why does my single/double quotes fail?
+  3.14 Does curl support javascript or pac (automated proxy config)?

 4. Running Problems
  4.1 Problems connecting to SSL servers.
@@ -47,10 +52,12 @@ FAQ
   4.5.3 "403 Forbidden"
   4.5.4 "404 Not Found"
   4.5.5 "405 Method Not Allowed"
+   4.5.6 "301 Moved Permanently"
  4.6 Can you tell me what error code 142 means?
  4.7 How do I keep user names and passwords secret in Curl command lines?
  4.8 I found a bug!
  4.9 Curl can't authenticate to the server that requires NTLM?
+  4.10 My HTTP request using HEAD, PUT or DELETE doesn't work!

 5. libcurl Issues
  5.1 Is libcurl thread-safe?
@@ -77,10 +84,12 @@ FAQ
  cURL (or simply just 'curl') is a command line tool for getting or sending
  files using URL syntax. The name is a play on 'Client for URLs', originally
  with URL spelled in uppercase to make it obvious it deals with URLs. The
-  fact it can also be pronounced 'see URL' also helped.
+  fact it can also be pronounced 'see URL' also helped, it works as an
+  abbrivation for "Client URL Request Library" or why not the recursive
+  version: "Curl is a URL Request Library".

  Curl supports a range of common Internet protocols, currently including
-  HTTP, HTTPS, FTP, GOPHER, LDAP, DICT, TELNET and FILE.
+  HTTP, HTTPS, FTP, FTPS, GOPHER, LDAP, DICT, TELNET and FILE.

  We spell it cURL or just curl. We pronounce it with an initial k sound:
  [kurl].
@@ -95,10 +104,9 @@ FAQ

  1.3 What is cURL not?
  
-  Curl is *not*, I repeat, *not* a wget clone even though that is a very
-  common misconception. Never, during curl's development, have I intended curl
-  to replace wget or compete on its market. Curl is targeted at single-shot
-  file transfers.
+  Curl is *not* a wget clone even though that is a very common misconception.
+  Never, during curl's development, have we intended curl to replace wget or
+  compete on its market. Curl is targeted at single-shot file transfers.

  Curl is not a web site mirroring program. If you wanna use curl to mirror
  something: fine, go ahead and write a script that wraps around curl to make
@@ -133,7 +141,7 @@ FAQ

  * We focus on protocol related issues and improvements. If you wanna do more
    magic with the supported protocols than curl currently does, chances are
-    big I will agree. If you wanna add more protocols, I may very well
+    big we will agree. If you wanna add more protocols, we may very well
    agree.

  * If you want someone else to make all the work while you wait for us to
@@ -148,28 +156,63 @@ FAQ
  1.5 Who makes cURL?

  cURL and libcurl are not made by any single individual. Sure, Daniel
-  Stenberg writes the major parts, but various people's submissions are
-  important and crucial. Anyone can post their changes and improvements and
-  have them inserted in the main sources (of course on the condition that
-  developers agree on that the fixes are good).
+  Stenberg writes the major parts, but other persons' submissions are
+  important and crucial. Anyone can contribute and post their changes and
+  improvements and have them inserted in the main sources (of course on the
+  condition that developers agree on that the fixes are good).

-  The list of contributors in the bottom of the man page is only a small part
-  of all the people that every day provide us with bug reports, suggestions,
-  ideas and source code.
+  The list of contributors in the docs/THANKS file is only a small part of all
+  the people that every day provide us with bug reports, suggestions, ideas
+  and source code.

  curl is developed by a community, with Daniel at the wheel.

  1.6 What do you get for making cURL?

-  Project cURL is entirely free and open, without any commercial interests or
-  money involved. No person gets paid in any way for developing curl. We all
-  do this voluntarily on our spare time.
+  Project cURL is entirely free and open. No person gets paid for developing
+  curl. We do this voluntarily on our spare time.

  We get some help from companies. Contactor Data hosts the curl web site and
  the main mailing list, Haxx owns the curl web site's domain and
  sourceforge.net hosts several project tools we take advantage from like the
  bug tracker, mailing lists and more.

+  If you want to support our project with a donation or similar, one way of
+  doing that would be to buy "gift certificates" at useful online shopping
+  sites, such as amazon.com or thinkgeek.com. Another way would be to sponsor
+  us through a banner-program or even better: by helping us coding,
+  documenting, testing etc.
+
+  1.7 What about CURL from curl.com?
+
+  During the summer 2001, curl.com has been busy advertising their client-side
+  programming language for the web, named CURL.
+
+  We are in no way associated with curl.com or their CURL programming
+  language. 
+
+  Our project name curl has been in effective use since 1998. We were not the
+  first computer related project to use the name "curl" and do not claim any
+  first-hand rights to the name.
+
+  We recognize that we will be living in parallel with curl.com and wish them
+  every success.
+
+  1.8 I have a problem who do I mail?
+
+  Please do not attempt to mail any single individual unless you really need
+  to. Keep curl-related questions on a suitable mailing list. All available
+  mailing lists are listed in the MANUAL document and online at
+  http://curl.haxx.se/mail/
+
+  Keeping curl-related questions and discussions on mailing lists allows others
+  to join in and help, to share their ideas, contribute their suggestions and
+  spread their wisdom. Keeping discussions on public mailing lists also allows
+  for others to learn from this (both current and future users thanks to the
+  web based archives of the mailing lists), thus saving us from having to
+  repeat ourselves even more. Thanks for respecting this.
+
+
 2. Install Related Problems

  2.1. configure doesn't find OpenSSL even when it is installed
@@ -285,16 +328,14 @@ FAQ
  the -H/--header option. By adding a header with empty contents you safely
  disable that one. Use -H "Pragma:" to disable that specific header.

-  3.6. Does curl support javascript, ASP, XML, XHTML or HTML version Y?
+  3.6. Does curl support ASP, XML, XHTML or HTML version Y?

  To curl, all contents are alike. It doesn't matter how the page was
  generated. It may be ASP, PHP, Perl, shell-script, SSI or plain
  HTML-files. There's no difference to curl and it doesn't even know what kind
  of language that generated the page.

-  Javascript is slightly different since that is code embedded in the HTML
-  that is sent for the client to interpret and curl has no javascript
-  interpreter.
+  See also item 3.14 regarding javascript.

  3.7. Can I use curl to delete/rename a file through FTP?

@@ -312,31 +353,21 @@ FAQ

     curl -L http://redirector.com

-  3.9 How do I use curl in PHP, Perl, Tcl, Ruby or Java?
+  3.9 How do I use curl in my favorite programming language?

-  There exist many language-interfaces for curl that integrates it better with
-  various languages. If you are fluid in a script language, you may very well
-  opt to use such an interface instead of using the command line tool.
-
-  At the time of writing, there are bindings for the five language mentioned
-  above, but chances are there are even more by the time you read this. Or you
-  may be able you write your own wrapper for a not-yet supported language!
+  There exist many language interfaces/bindings for curl that integrates it
+  better with various languages. If you are fluid in a script language, you
+  may very well opt to use such an interface instead of using the command line
+  tool.

  Find out more about which languages that support curl directly, and how to
  install and use them, in the libcurl section of the curl web site:

        http://curl.haxx.se/libcurl/
-  
-  PHP4 has the ability to use libcurl as an internal module if built with that
-  option enabled. You then get a set of extra functions that can be used
-  within your PHP programs. You find all details about those functions in the
-  curl section in the PHP manual, see the online version at:

-        http://www.php.net/manual/ref.curl.php
-
-  PHP also offers the option to run a command line, and then you can of course
-  invoke the curl tool using a command line. This is the way to use curl if
-  you're using PHP3 or PHP4 built without curl module support.
+  In December 2001, there are interfaces available for the following
+  languages: C/C++, Cocoa, Dylan, Java, Perl, PHP, Python, Rexx, Ruby, Scheme
+  and Tcl. By the time you read this, additional ones may have appeared!

  3.10 What about SOAP, WebDAV, XML-RPC or similar protocols over HTTP?

@@ -355,6 +386,66 @@ FAQ

        curl -d "datatopost" -H "Content-Type: text/xml" [URL]

+  3.12 Why do FTP specific features over HTTP proxy fail?
+
+  Because when you use a HTTP proxy, the protocol spoken on the network will
+  be HTTP, even if you specify a FTP URL. This effectively means that you
+  normally can't use FTP specific features such as FTP upload and FTP quote
+  etc.
+
+  There is one exception to this rule, and that is if you can "tunnel through"
+  the given HTTP proxy. Proxy tunneling is enabled with a special option (-p)
+  and is generally not available as proxy admins usually disable tunneling to
+  other ports than 443 (which is used for HTTPS access through proxies).
+
+  3.13 Why does my single/double quotes fail?
+
+  To specify a command line option that includes spaces, you might need to
+  put the entire option within quotes. Like in:
+
+   curl -d " with spaces " url.com
+  
+  or perhaps
+
+   curl -d ' with spaces ' url.com
+
+  Exactly what kind of quotes and how to do this is entirely up to the shell
+  or command line interpreter that you are using. For most unix shells, you
+  can more or less pick either single (') or double (") quotes. For
+  Windows/DOS prompts I believe you're forced to use double (") quotes.
+
+  Please study the documentation for your particular environment. Examples in
+  the curl docs will use a mix of both these ones as shown above. You must
+  adjust them to work in your environment.
+
+  Remember that curl works and runs on more operating systems than most single
+  individuals have ever tried.
+
+  3.14 Does curl support javascript or pac (automated proxy config)?
+
+  Many web pages do magic stuff using embedded javascript. Curl and libcurl
+  have no built-in support for that, so it will be treated just like any other
+  contents.
+
+  .pac files are a netscape invention and are sometimes used by organizations
+  to allow them to differentiate which proxies to use. The .pac contents is
+  just a javascript program that gets invoked by the browser and that returns
+  the name of the proxy to connect to. Since curl doesn't support javascript,
+  it can't support .pac proxy configuration either.
+
+  Some work-arounds usually suggested to overcome this javascript dependency:
+
+    - Depending on the javascript complexity, write up a script that
+      translates it to another language and execute that.
+
+    - Read the javascript code and rewrite the same logic in another language.
+
+    - Implement a javascript interpreted, people have successfully used the
+      Mozilla javascript engine in the past.
+
+    - Ask your admins to stop this, for a static proxy setup or similar.
+
+
 4. Running Problems

  4.1. Problems connecting to SSL servers.
@@ -383,11 +474,12 @@ FAQ

     curl 'http://www.altavista.com/cgi-bin/query?text=yes&q=curl'

-  In win32, the standard DOS shell treats the %-letter specially and you may
-  need to quote the string properly when % is used in it.
+  In Windows, the standard DOS shell treats the %-letter specially and you
+  need to use TWO %-letters for each single one you want to use in the URL.

  Also note that if you want the literal %-letter to be part of the data you
-  pass in a POST using -d/--data you must encode it as '%25'.
+  pass in a POST using -d/--data you must encode it as '%25' (which then also
+  needs the %-letter doubled on Windows machines).

  4.3. How can I use {, }, [ or ] to specify multiple URLs?

@@ -444,12 +536,23 @@ FAQ
    identified by the Request-URI. The response MUST include an Allow header
    containing a list of valid methods for the requested resource.

+    4.5.6 "301 Moved Permanently"
+ 
+    If you get this return code and an HTML output similar to this:
+
+       <H1>Moved Permanently</H1> The document has moved <A
+       HREF="http://same_url_now_with_a_trailing_slash/">here</A>.
+
+    it might be because you request a directory URL but without the trailing
+    slash. Try the same operation again _with_ the trailing URL, or use the
+    -L/--location option to follow the redirection.
+
  4.6. Can you tell me what error code 142 means?

  All error codes that are larger than the highest documented error code means
-  that curl has existed due to a timeout. There was no nice way for curl to
-  abort from such a condition and that's why it got this undocumented
-  error. This should not occur in releases after 7.4.1.
+  that curl has exited due to a crash. This is a serious error, and we
+  appreciate a detailed bug report from you that describes how we could go
+  ahead and repeat this!

  4.7. How do I keep user names and passwords secret in Curl command lines?

@@ -477,12 +580,8 @@ FAQ
  particular platform, try contacting the person who built the package/archive
  you have.

-  If there is a bug, post a bug report in the Curl Bug Track System over at
-  http://sourceforge.net/bugs/?group_id=976
-
-  Always include as many details you can think of, including curl version,
-  operating system name and version and complete instructions how to repeat
-  the bug.
+  If there is a bug, read the BUGS document first. Then report it as described
+  in there.

  4.9. Curl can't authenticate to the server that requires NTLM?

@@ -490,6 +589,18 @@ FAQ
  currently support that. Proprietary formats are evil. You should not use
  such ones.

+  4.10 My HTTP request using HEAD, PUT or DELETE doesn't work!
+
+  Many web servers allow or demand that the administrator configures the
+  server properly for these requests to work on the web server.
+
+  Some servers seem to support HEAD only on certain kinds of URLs.
+
+  To fully grasp this, try the documentation for the particular server
+  software you're trying to interact with. This is not anything curl can do
+  anything about.
+
+
 5. libcurl Issues

  5.1. Is libcurl thread-safe?
@@ -553,13 +664,7 @@ FAQ

  5.4 Does libcurl do Winsock initialization on win32 systems?

-  No.
-
-  On win32 systems, you need to init the winsock stuff manually, libcurl will
-  not do that for you. WSAStartup() and WSACleanup() should be used
-  accordingly. The reason for this is of course that a single application may
-  use several different libraries and parts, and there's no reason for every
-  single library to do this.
+  Yes (since 7.8.1) if told to in the curl_global_init() call.

  5.5 Does CURLOPT_FILE and CURLOPT_INFILE work on win32 ?

@@ -583,12 +688,10 @@ FAQ

 6. License Issues

-  Curl and libcurl are released under a MIT/X derivate license *or* the MPL,
-  the Mozilla Public License. To get a really good answer to your license
-  conflict questions, you should study the MPL and MIT/X licenses and the
-  license you are about to use and check for clashes yourself. This section is
-  just a brief summary for the cases we get the most questions. (Parts of this
-  section was much enhanced by Bjorn Reese.)
+  Curl and libcurl are released under a MIT/X derivate license. The license is
+  very liberal and should not impose a problem for your project. This section
+  is just a brief summary for the cases we get the most questions. (Parts of
+  this section was much enhanced by Bjorn Reese.)

  6.1. I have a GPL program, can I use the libcurl library?

--- a/docs/FEATURES
+++ b/docs/FEATURES
@@ -56,7 +56,7 @@ FTP
 - download
 - authentication
 - kerberos security
- - PORT or PASV
+ - active/passive using PORT, EPRT, PASV or EPSV
 - single file size information (compare to HTTP HEAD)
 - 'type=' URL support
 - dir listing
--- a/docs/HISTORY
+++ b/docs/HISTORY
@@ -0,0 +1,113 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+                          How cURL Become Like This
+
+
+In the second half of 1997, Daniel Stenberg came up with the idea to make
+currency-exchange calculations available to Internet Relay Chat (IRC)
+users. All the necessary data are published on the Web; he just needed to
+automate their retrieval.
+
+Daniel simply adopted an existing command-line open-source tool, httpget, that
+Brazilian Rafael Sagula had written. After a few minor adjustments, it did
+just what he needed.
+
+Soon, he found currencies on a GOPHER site, so support for that had to go in,
+and not before long FTP download support was added as well. The name of the
+project was changed to urlget to better fit what it actually did now, since
+the http-only days were already passed.
+
+The project slowly grew bigger. When upload capabilities were added and the
+name once again was misleading, a second name change was made and on March 20,
+1998 curl 4 was released. (The version numbering from the previous names were
+kept.)
+
+(Unrelated to this project a company called Curl Corporation filed a US
+trademark on the name "CURL" on May 18 1998. That company had then already
+registered the curl.com domain back in November of the previous year. All this
+was much later brought into the lights.)
+
+SSL support was added, powered by the SSLeay library.
+
+August 1998, added project curl to freshmeat.net.
+
+October 1998, with the curl 4.9 release and the introduction of cookie
+support, curl was no longer released under the GPL license. Now we're at 4000
+lines of code, we switched over to the MPL license to restrict the effects of
+"copyleft".
+
+November 1998, configure script and reported successful compiles on several
+major operating systems. The never-quite-understood -F option was added and
+curl could now simulate quite a lot of a browser.
+
+Curl 5 was released in December 1998 and introduced the first ever curl man
+page. People started making Linux RPM packages out of it.
+
+January 1999, DICT support added.
+
+OpenSSL took over where SSLeay was abandoned.
+
+May 1999, first Debian package.
+
+August 1999, LDAP:// and FILE:// support added. The curl web site gets 1300
+visits daily.
+
+Released curl 6.0 in September. 15000 lines of code.
+
+December 28 1999, added project to Sourceforge and started using its services
+for managing the project.
+
+Spring 2000, major internal overhaul to provide a suitable library interface.
+The first non-beta release was named 7.1 and arrived in August. This offered
+the easy interface and turned out to be the beginning of actually getting
+other software and programs to get based on and powered by libcurl. Almost
+20000 lines of code.
+
+August 2000, the curl web site gets 4000 visits daily.
+
+The PHP guys adopted libcurl already the same month, when the first ever third
+party libcurl binding showed up. CURL has been a supported module in PHP since
+the release of PHP 4.0.2. This would soon get followers. More than 16
+different bindings exist at the time of this writing.
+
+September 2000, kerberos4 support was added.
+
+In November 2000 started the work on a test suite for curl. It was later
+re-written from scratch again.
+
+January 2001, Daniel released curl 7.5.2 under a new license again: MIT (or
+MPL). The MIT license is extremely liberal and can be used combined with GPL
+in other projects. This would finally put an end to the "complaints" from
+people involved in GPLed projects that previously were prohibited from using
+libcurl while it was released under MPL only. (Due to the fact that MPL is
+deemed "GPL incompatible".)
+
+curl supports HTTP 1.1 starting with the release of 7.7, March 22 2001. This
+also introduced libcurl's ability to do persistent connections. 24000 lines of
+code.
+
+August 2001. curl is bundled in Mac OS X, 10.1. It was already becoming more
+and more of a standard utility of Linux distributions and a regular in the BSD
+ports collections. The curl web site gets 8000 visits daily. Curl Corporation
+contacted Daniel to discuss "the name issue". After Daniel's reply, they have
+never since got in touch again.
+
+September 2001, libcurl 7.9 introduces cookie jar and curl_formadd(). During
+the forthcoming 7.9.x releases, we introduced the multi interface slowly and
+without much whistles.
+
+June 2002, the curl web site gets 13000 visits daily. curl and libcurl is
+35000 lines of code. Reported successful compiles on more than 40 combinations
+of CPUs and operating systems.
+
+To estimate number of users of the curl tool or libcurl library is next to
+impossible. Around 5000 downloaded packages each week from the main site gives
+a hint, but the packages are mirrored extensively, bundled with numerous OS
+distributions and otherwise retrieved as part of other software.
+
+September 2002, with the release of curl 7.10 it is released under the MIT
+license only.
--- a/docs/INSTALL
+++ b/docs/INSTALL
@@ -6,13 +6,14 @@

                                How To Compile

-Curl has been compiled and built on numerous different operating systems. The
-way to proceed is mainly divided in two different ways: the unix way or the 
-windows way.
+Curl has been compiled and built on numerous different operating systems.

-If you're using Windows (95/98/NT/ME/2000 or whatever) or OS/2, you should
-continue reading from the Win32 or OS/2 headers further down. All other
-systems should be capable of being installed as described below.
+Most systems build curl the same way (unix-style). Continue reading below for
+more details if you're one of them.
+
+If you're using Windows (95/98/NT/ME/2000/XP or similar), VMS, RISC OS or OS/2
+or cross-compile, you should continue reading from one the paragraphs further
+down.

 UNIX
 ====
@@ -35,8 +36,7 @@ UNIX
   The configure script always tries to find a working SSL library unless
   explicitly told not to. If you have OpenSSL installed in the default search
   path for your compiler/linker, you don't need to do anything special. If
-   you have OpenSSL installed in e.g /usr/local/ssl, you can run configure
-   like:
+   you have OpenSSL installed in /usr/local/ssl, you can run configure like:

 	./configure --with-ssl

@@ -45,13 +45,13 @@ UNIX

 	./configure --with-ssl=/opt/OpenSSL

-   If you insist on forcing a build *without* SSL support, even though you may
-   have it installed in your system, you can run configure like this:
+   If you insist on forcing a build without SSL support, even though you may
+   have OpenSSL installed in your system, you can run configure like this:

        ./configure --without-ssl

   If you have OpenSSL installed, but with the libraries in one place and the
-   header files somewhere else, you'll have to set the LDFLAGS and CPPFLAGS
+   header files somewhere else, you have to set the LDFLAGS and CPPFLAGS
   environment variables prior to running configure.  Something like this
   should work:

@@ -71,7 +71,7 @@ UNIX
     LIBS=-lRSAglue -lrsaref
     (as suggested by Doug Kaufman)

-   KNOWN PROBLEMS
+   KNOWN PROBLEMS (these ones should not happen anymore)

     If you happen to have autoconf installed, but a version older than 2.12
     you will get into trouble. Then you can still build curl by issuing these
@@ -100,8 +100,8 @@ UNIX

   MORE OPTIONS

-     Remember, to force configure to use the standard cc compiler if both
-     cc and gcc are present, run configure like
+     To force configure to use the standard cc compiler if both cc and gcc are
+     present, run configure like

       CC=cc ./configure
         or
@@ -129,11 +129,6 @@ UNIX

       ./configure --with-krb4=/usr/athena

-     If your system support shared libraries, but you want to built a static
-     version only, you can disable building the shared version by using:
-
-       ./configure --disable-shared
-
     If you're a curl developer and use gcc, you might want to enable more
     debug options with the --enable-debug option.

@@ -176,16 +171,16 @@ Win32
        Make the sources in the src/ drawer be a "win32 console application"
        project. Name it curl.

-        With VC++, add 'wsock32.lib' to the link libs when you build curl!
-        Borland seems to do that itself magically. Of course you have to
-        make sure it links with the libcurl too!
+        With VC++, add 'ws2_32.lib' to the link libs when you build curl!
+        Borland seems to do that itself magically. Of course you have to make
+        sure it links with the libcurl too!

        For VC++ 6, there's an included Makefile.vc6 that should be possible
        to use out-of-the-box.

-        Microsoft note: add /Zm200 to the compiler options to increase the 
-		compiler's memory allocation limit, as the hugehelp.c won't compile
-		due to "too long puts string".
+        Microsoft note: add /Zm200 to the compiler options to increase the
+        compiler's memory allocation limit, as the hugehelp.c won't compile
+        due to "too long puts string".


   With SSL:
@@ -206,17 +201,34 @@ Win32

      Microsoft command line style
      ----------------------------
+
        Please read the OpenSSL documentation on how to compile and install
-        the OpenSSL library.  This generates the libeay32.dll and ssleay32.dll
-        files.
+        the OpenSSL libraries.  The build process of OpenSSL generates the
+        libeay32.dll and ssleay32.dll files in the out32dll subdirectory in
+        the OpenSSL home directory.  OpenSSL static libraries (libeay32.lib,
+        ssleay32.lib, RSAglue.lib) are created in the out32 subdirectory.

-        Run the 'vcvars32.bat' file to get the proper environment variables
-        set. Edit the makefile.vc6 in the lib directory and define
-        OPENSSL_PATH.  Set the location of the OpenSSL library and run 'nmake
-        vc-ssl' in the root directory.
+        Run the 'vcvars32.bat' file to get a proper environment. The
+        vcvars32.bat file is part of the Microsoft development environment and
+        you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
+        provided that you installed Visual C/C++ 6 in the default directory.

-        The vcvars32.bat file is part of the Microsoft development
-        environment.
+        Before running nmake define the OPENSSL_PATH environment variable with
+        the root/base directory of OpenSSL, for example:
+
+          set OPENSSL_PATH=c:\openssl-0.9.6b
+
+        Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
+        directory.  'nmake vc-ssl' will create a libcurl static and dynamic
+        libraries in the lib subdirectory, as well as a statically linked
+        version of curl.exe in the src subdirectory.  This statically linked
+        version is a standalone executable not requiring any DLL at
+        runtime. This make method requires that you have the static OpenSSL
+        libraries available in OpenSSL's out32 subdirectory.
+	'nmake vc-ssl-dll' creates the libcurl dynamic library and
+	links curl.exe against libcurl and OpenSSL dynamically.
+	This executable requires libcurl.dll and the OpenSSL DLLs
+	at runtime.

      Microsoft / Borland style
      -------------------------
@@ -224,6 +236,30 @@ Win32
        project properties to use the SSL include path, link with the SSL libs
        and define the USE_SSLEAY symbol.

+   Disabling Specific Protocols:
+
+      The configure utility, unfortunately, is not available for the Windows
+      environment, therefore, you cannot use the various disable-protocol
+      options of the configure utility on this platform.
+
+      However, you can use the following defines to disable specific
+      protocols:
+
+      HTTP_ONLY             disables all protocols except HTTP
+      CURL_DISABLE_FTP      disables FTP
+      CURL_DISABLE_LDAP     disables LDAP
+      CURL_DISABLE_TELNET   disables TELNET
+      CURL_DISABLE_DICT     disables DICT
+      CURL_DISABLE_FILE     disables FILE
+      CURL_DISABLE_GOPHER   disables GOPHER
+
+      If you want to set any of these defines you have the following
+      possibilities:
+
+      - Modify lib/setup.h
+      - Modify lib/Makefile.vc6
+      - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
+        in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.

 IBM OS/2
 ========
@@ -255,29 +291,166 @@ IBM OS/2
   If you're getting huge binaries, probably your makefiles have the -g in
   CFLAGS.

+VMS
+===
+   (The VMS section is in whole contributed by the friendly Nico Baggus)
+
+   This is the first attempt at porting cURL to VMS.
+
+   Curl seems to work with FTP & HTTP other protocols are not tested.  (the
+   perl http/ftp testing server supplied as testing too cannot work on VMS
+   because vms has no concept of fork(). [ I tried to give it a whack, but
+   thats of no use.
+
+   SSL stuff has not been ported.
+
+   Telnet has about the same issues as for Win32. When the changes for Win32
+   are clear maybe they'l work for VMS too. The basic problem is that select
+   ONLY works for sockets.
+
+   Marked instances of fopen/[f]stat that might become a problem, especially
+   for non stream files. In this regard, the files opened for writing will be
+   created stream/lf and will thus be safe. Just keep in mind that non-binary
+   read/wring from/to files will have a records size limit of 32767 bytes
+   imposed.
+
+   Stat to get the size of the files is again only safe for stream files &
+   fixed record files without implied CC.
+
+   -- My guess is that only allowing access to stream files is the quickest
+   way to get around the most issues. Therefore all files need to to be
+   checked to be sure they will be stream/lf before processing them.  This is
+   the easiest way out, I know. The reason for this is that code that needs to
+   report the filesize will become a pain in the ass otherwise.
+
+   Exit status.... Well we needed something done here,
+
+   VMS has a structured exist status:
+   | 3  |       2    |     1       |  0|
+   |1098|765432109876|5432109876543|210|
+   +----+------------+-------------+---+
+   |Ctrl|  Facility  | Error code  |sev|
+   +----+------------+-------------+---+
+
+   With the Ctrl-bits an application can tell if part or the whole message has
+   allready been printed from the program, DCL doesn't need to print it again.
+
+   Facility - basicaly the program ID. A code assigned to the program
+   the name can be fetched from external or internal message libraries
+   Errorcode - the errodes assigned by the application
+   Sev. - severity: Even = error, off = non error
+		0 = Warning
+		1 = Success
+		2 = Error
+		3 = Information
+		4 = Fatal 
+		<5-7> reserved.
+
+   This all presents itself with:
+   %<FACILITY>-<SeV>-<Errorname>, <Error message>
+
+   See also the src/curlmsg.msg file, it has the source for the messages In
+   src/main.c a section is devoted to message status values, the globalvalues
+   create symbols with certain values, referenced from a compiled message
+   file. Have all exit function use a exit status derived from a translation
+   table with the compiled message codes.
+
+   This was all compiled with:
+
+	Compaq C V6.2-003 on OpenVMS Alpha V7.1-1H2
+
+   So far for porting notes as of:
+   13-jul-2001
+   N. Baggus
+
+QNX
+===
+   (This section was graciously brought to us by David Bentham)
+
+   As QNX is targetted for resource constrained environments, the QNX headers
+   set conservative limits. This includes the FD_SETSIZE macro, set by default
+   to 32. Socket descriptors returned within the CURL library may exceed this,
+   resulting in memory faults/SIGSEGV crashes when passed into select(..)
+   calls using fd_set macros.
+
+   A good all-round solution to this is to override the default when building
+   libcurl, by overriding CFLAGS during configure, example
+   #  configure CFLAGS='-DFD_SETSIZE=64 -g -O2'
+
+CROSS COMPILE
+=============
+
+   (This section was graciously brought to us by Jim Duey, 23-oct-2001)
+
+   Download and unpack the cURL package.  Version should be 7.9.1 or later.
+
+   'cd' to the new directory. (ie. curl-7.9.1-pre4)
+
+   Set environment variables to point to the cross-compile toolchain and call
+   configure with any options you need.  Be sure and specify the '--host' and
+   '--build' parameters at configuration time.  The following script is an
+   example of cross-compiling for the IBM 405GP PowerPC processor using the
+   toolchain from MonteVista for Hardhat Linux.
+
+   (begin script)
+
+   #! /bin/sh
+
+   export PATH=$PATH:/opt/hardhat/devkit/ppc/405/bin
+   export CPPFLAGS="-I/opt/hardhat/devkit/ppc/405/target/usr/include"
+   export AR=ppc_405-ar
+   export AS=ppc_405-as
+   export LD=ppc_405-ld
+   export RANLIB=ppc_405-ranlib
+   export CC=ppc_405-gcc
+   export NM=ppc_405-nm
+
+   configure --target=powerpc-hardhat-linux \
+	--host=powerpc-hardhat-linux \
+	--build=i586-pc-linux-gnu \
+	--prefix=/opt/hardhat/devkit/ppc/405/target/usr/local \
+	--exec-prefix=/usr/local
+
+   (end script)
+
+   The '--prefix' parameter specifies where cURL will be installed.  If
+   'configure' completes successfully, do 'make' and 'make install' as usual.
+
 PORTS
 =====
-   This is a probably incomplete list of known hardware and
-   operating systems that curl has been compiled for:
+   This is a probably incomplete list of known hardware and operating systems
+   that curl has been compiled for. If you know a system curl compiles and
+   runs on, that isn't listed, please let us know!

-        - Ultrix 4.3a
-        - SINIX-Z v5
        - Alpha DEC OSF 4
        - Alpha Digital UNIX v3.2
-        - Alpha FreeBSD 4.1
-        - Alpha Linux 2.2.16
+        - Alpha FreeBSD 4.1, 4.5
+        - Alpha Linux 2.2, 2.4
+        - Alpha NetBSD 1.5.2
+        - Alpha OpenBSD 3.0
+        - Alpha OpenVMS V7.1-1H2
        - Alpha Tru64 v5.0 5.1
        - HP-PA HP-UX 9.X 10.X 11.X
+        - HP-PA Linux
        - MIPS IRIX 6.2, 6.5
-        - Power AIX 4.2, 4.3.1, 4.3.2
+        - MIPS Linux
+        - Pocket PC/Win CE 3.0
+        - Power AIX 4.2, 4.3.1, 4.3.2, 5.1
        - PowerPC Darwin 1.0
        - PowerPC Linux
+        - PowerPC Mac OS 9
        - PowerPC Mac OS X
+        - SINIX-Z v5
        - Sparc Linux
        - Sparc Solaris 2.4, 2.5, 2.5.1, 2.6, 7, 8
        - Sparc SunOS 4.1.X
+        - StrongARM (and other ARM) RISC OS 3.1, 4.02
+        - StrongARM Linux 2.4
+        - StrongARM NetBSD 1.4.1
+        - Ultrix 4.3a
        - i386 BeOS
        - i386 FreeBSD
+        - i386 HURD
        - i386 Linux 1.3, 2.0, 2.2, 2.3, 2.4
        - i386 NetBSD
        - i386 OS/2
@@ -285,10 +458,12 @@ PORTS
        - i386 SCO unix
        - i386 Solaris 2.7
        - i386 Windows 95, 98, ME, NT, 2000
+        - i386 QNX 6
        - ia64 Linux 2.3.99
        - m68k AmigaOS 3
+        - m68k Linux
        - m68k OpenBSD
-        - StrongARM NetBSD 1.4.1
+        - s390 Linux 

 OpenSSL
 =======
--- a/docs/INTERNALS
+++ b/docs/INTERNALS
@@ -1,4 +1,4 @@
-                                       Updated for curl 7.8 on May 29, 2001
+                                    Updated for curl 7.9.1 on November 2, 2001
                                  _   _ ____  _     
                              ___| | | |  _ \| |    
                             / __| | | | |_) | |    
@@ -54,7 +54,7 @@ Windows vs Unix
 Inside the source code, We make an effort to avoid '#ifdef [Your OS]'. All
 conditionals that deal with features *should* instead be in the format
 '#ifdef HAVE_THAT_WEIRD_FUNCTION'. Since Windows can't run configure scripts,
- we maintain two config-win32.h files (one in / and one in src/) that are
+ we maintain two config-win32.h files (one in lib/ and one in src/) that are
 supposed to look exactly as a config.h file would have looked like on a
 Windows machine!

@@ -69,24 +69,24 @@ Library
 rather small and easy-to-follow. All the ones prefixed with 'curl_easy' are
 put in the lib/easy.c file.

- Starting with libcurl 7.8, curl_global_init_() and curl_global_cleanup() were
- introduced. They should be called by the application to initialize and clean
- up global stuff in the library. As of today, they just do the global SSL
- initing if SSL is enabled. libcurl itself has no "global" scope.
+ curl_global_init_() and curl_global_cleanup() should be called by the
+ application to initialize and clean up global stuff in the library. As of
+ today, it can handle the global SSL initing if SSL is enabled and it can init
+ the socket layer on windows machines. libcurl itself has no "global" scope.

 All printf()-style functions use the supplied clones in lib/mprintf.c. This
 makes sure we stay absolutely platform independent.

 curl_easy_init() allocates an internal struct and makes some initializations.
- The returned handle does not reveal internals. This is the 'UrlData' struct
- which works as a global "anchor" struct. All connections performed will get
- connect-specific data allocated that should be used for things related to
- particular connections/requests.
+ The returned handle does not reveal internals. This is the 'SessionHandle'
+ struct which works as an "anchor" struct for all curl_easy functions. All
+ connections performed will get connect-specific data allocated that should be
+ used for things related to particular connections/requests.

 curl_easy_setopt() takes three arguments, where the option stuff must be
 passed in pairs: the parameter-ID and the parameter-value. The list of
 options is documented in the man page. This function mainly sets things in
- the 'UrlData' struct.
+ the 'SessionHandle' struct.

 curl_easy_perform() does a whole lot of things:

@@ -106,7 +106,7 @@ Library
   This function makes sure there's an allocated and initiated 'connectdata'
   struct that is used for this particular connection only (although there may
   be several requests performed on the same connect). A bunch of things are
-   inited/inherited from the UrlData struct.
+   inited/inherited from the SessionHandle struct.

 o Curl_do()

@@ -123,6 +123,13 @@ Library
   Curl_Transfer() function (in lib/transfer.c) to setup the transfer and
   returns.

+   Starting in 7.9.1, if this DO function fails and the connection is being
+   re-used, libcurl will then close this connection, setup a new connection
+   and re-issue the DO request on that. This is because there is no way to be
+   perfectly sure that we have discovered a dead connection before the DO
+   function and thus we might wrongly be re-using a connection that was closed
+   by the remote peer.
+
 o Transfer()

   Curl_perform() then calls Transfer() in lib/transfer.c that performs
@@ -144,7 +151,7 @@ Library
 o Curl_disconnect()

   When doing normal connections and transfers, no one ever tries to close any
-   connection so this is not normally called when curl_easy_perform() is
+   connections so this is not normally called when curl_easy_perform() is
   used. This function is only used when we are certain that no more transfers
   is going to be made on the connection. It can be also closed by force, or
   it can be called to make sure that libcurl doesn't keep too many
@@ -258,12 +265,12 @@ Persistent Connections
 The persistent connection support in libcurl requires some considerations on
 how to do things inside of the library.

- o The 'UrlData' struct returned in the curl_easy_init() call must never
-   hold connection-oriented data. It is meant to hold the root data as well
-   as all the options etc that the library-user may choose.
- o The 'UrlData' struct holds the "connection cache" (an array of pointers to
-   'connectdata' structs). There's one connectdata struct allocated for each
-   connection that libcurl knows about.
+ o The 'SessionHandle' struct returned in the curl_easy_init() call must never
+   hold connection-oriented data. It is meant to hold the root data as well as
+   all the options etc that the library-user may choose.
+ o The 'SessionHandle' struct holds the "connection cache" (an array of
+   pointers to 'connectdata' structs). There's one connectdata struct
+   allocated for each connection that libcurl knows about.
 o This also enables the 'curl handle' to be reused on subsequent transfers,
   something that was illegal before libcurl 7.7.
 o When we are about to perform a transfer with curl_easy_perform(), we first
--- a/docs/KNOWN_BUGS
+++ b/docs/KNOWN_BUGS
@@ -0,0 +1,86 @@
+These are problems known to exist at the time of this release. Feel free to
+join in and help us correct one or more of these! Also be sure to check the
+changelog of the current development status, as one or more of these problems
+may have been fixed since this was written!
+
+* Running 'make test' on Mac OS X gives 4 errors. This seems to be related
+  to some kind of libtool problem:
+  http://curl.haxx.se/mail/archive-2002-03/0029.html and
+  http://curl.haxx.se/mail/archive-2002-03/0033.html
+
+* libcurl does not deal nicely with files larger than 2GB
+
+* GOPHER transfers seem broken
+
+* configure --disable-http is not fully supported. All other protocols seem
+  to work to disable.
+
+* If a HTTP server responds to a HEAD request and includes a body (thus
+  violating the RFC2616), curl won't wait to read the response but just stop
+  reading and return back. If a second request (let's assume a GET) is then
+  immediately made to the same server again, the connection will be re-used
+  fine of course, and the second request will be sent off but when the
+  response is to get read, the previous response-body is what curl will read
+  and havoc is what happens.
+  More details on this is found in this libcurl mailing list thread:
+  http://curl.haxx.se/mail/lib-2002-08/0000.html
+
+------------------------------------------------------------------------------
+
+Q: My program blows up when I run lots of curl_easy_perform() calls on a
+single thread
+Q: My program dies when a single thread re-enters the win32 select() call
+via curl_easy_perform()
+Q: --- add your own flavour here ---
+
+Single Threaded Re-Entracy
+--------------------------
+
+There is a glitch / trick to using cURL on Win32 related to re-entrancy.
+This experience was gained on verion 7.9.4 using Windows NT SP3 in a banking
+environment (just in case you wanted to know).
+
+If you have already called curl_easy_perform(), and *somehow* you cause your
+single thread of execution to make another call to curl_easy_perform() - the
+windows socket() call used to create a new socket for the second connection
+can return with 10044 / 10043 error codes.
+
+The WSA errors we experienced are:
+WSAEPROTONOSUPPORT 
+(10043) 
+Protocol not supported. 
+The requested protocol has not been configured into the system, or no
+implementation for it exists. For example, a socket call requests a
+SOCK_DGRAM socket, but specifies a stream protocol. 
+
+WSAESOCKTNOSUPPORT 
+(10044) 
+Socket type not supported. 
+The support for the specified socket type does not exist in this address
+family. For example, the optional type SOCK_RAW might be selected in a
+socket call, and the implementation does not support SOCK_RAW sockets at
+all. 
+
+We have experienced this by creating a timer that ticks every 20ms, and on
+the tick making a curl_easy_perform() call.  The call usually completed in
+about 300ms.  And we expected (before this test) that the timer would NOT be
+fired during a call to curl_easy_perform(), howvever, while the first
+curl_easy_perform() is running a tick *is* fired by the windows API somehow,
+and we then call curl_easy_perform() again - thus single threaded
+re-entrancy is achieved.
+
+Notes:
+* We made sure that a new CURL structure was being used for each
+curl_easy_perform() request, and that the curl_global_init() had been called
+beforehand.  
+* I'm happy to answer any questions about this problem to try to track it
+down.
+* Once the socket() call started failing, there is no hope - it never works
+again.
+* Slowing the timer down to give each request enough time to complete solves
+this problem completely.
+
+If anyone has the source code to the WinNT implementation of socket() and
+can figure out WHY this can occur, more tracing can be performed.
+
+        John Clayton <John.Clayton at barclayscapital.com>
--- a/docs/LIBCURL
+++ b/docs/LIBCURL
@@ -1,117 +0,0 @@
-                         _ _ _                     _ 
-                        | (_) |__   ___ _   _ _ __| |
-                        | | | '_ \ / __| | | | '__| |
-                        | | | |_) | (__| |_| | |  | |
-                        |_|_|_.__/ \___|\__,_|_|  |_|
-
-                   How To Use Libcurl In Your C/C++ Program
-
- [ libcurl can be used directly from within your Java, PHP, Perl, Ruby or Tcl
-   programs as well, look elsewhere for documentation on this ]
-
- The interface is meant to be very simple for applictions/programmers, hence
- the name "easy". We have therefore minimized the number of entries.
-
-The Easy Interface
-
- When using the easy interface, you init your session and get a handle, which
- you use as input to the following interface functions you use. Use
- curl_easy_init() to get the handle.
-
- You continue by setting all the options you want in the upcoming transfer,
- most important among them is the URL itself (you can't transfer anything
- without a specified URL as you may have figured out yourself). You might want
- to set some callbacks as well that will be called from the library when data
- is available etc. curl_easy_setopt() is there for this.
-
- When all is setup, you tell libcurl to perform the transfer using
- curl_easy_perform(). It will then do the entire operation and won't return
- until it is done or failed.
-
- After the transfer has been made, you cleanup the session with
- curl_easy_cleanup() and libcurl is entirely off the hook! If you want
- persistant connections, you don't cleanup immediately, but instead run ahead
- and perform other transfers. See the chapter below for Persistant
- Connections.
-
- While the above mentioned four functions are the main functions to use in the
- easy interface, there is a series of other helpful functions to use. They
- are:
-
-   curl_version()        - displays the libcurl version
-   curl_getdate()        - converts a date string to time_t
-   curl_getenv()         - portable environment variable reader
-   curl_easy_getinfo()   - get information about a performed transfer
-   curl_formparse()      - helps building a HTTP form POST
-   curl_formfree()       - free a list built with curl_formparse()
-   curl_slist_append()   - builds a linked list
-   curl_slist_free_all() - frees a whole curl_slist
-
- For details on these, read the separate man pages.
-
-Linking with libcurl
-
- Staring with 7.7.2 (on unix-like machines), there's a tool named curl-config
- that gets installed with the rest of the curl stuff when 'make install' is
- performed.
-
- curl-config is added to make it easier for applications to link with
- libcurl and developers to learn about libcurl and how to use it.
-
- Run 'curl-config --libs' to get the (additional) linker options you need to
- link with the particular version of libcurl you've installed.
-
- For details, see the curl-config.1 man page.
-
-libcurl symbol names
-
- All public functions in the libcurl interface are prefixed with 'curl_' (with
- a lowercase c). You can find other functions in the library source code, but
- other prefixes indicate the functions are private and may change without
- further notice in the next release.
-
- Only use documented functions and functionality!
-
-Portability
-
- libcurl works *exactly* the same, on any of the platforms it compiles and
- builds on.
-
- There's only one caution, and that is the win32 platform that may(*) require
- you to init the winsock stuff before you use the libcurl functions. Details
- on this are noted on the curl_easy_init() man page.
-
- (*) = it appears as if users of the cygwin environment get this done
-       automatically.
-
-Threads
-
- Never *ever* call curl-functions simultaneously using the same handle from
- several threads. libcurl is thread-safe and can be used in any number of
- threads, but you must use separate curl handles if you want to use libcurl in
- more than one thread simultaneously.
-
-Persistant Connections
-
- With libcurl 7.7, persistant connections were added. Persistant connections
- means that libcurl can re-use the same connection for several transfers, if
- the conditions are right.
-
- libcurl will *always* attempt to use persistant connections. Whenever you use
- curl_easy_perform(), libcurl will attempt to use an existing connection to do
- the transfer, and if none exists it'll open a new one that will be subject
- for re-use on a possible following call to curl_easy_perform().
-
- To allow libcurl to take full advantage of persistant connections, you should
- do as many of your file transfers as possible using the same curl
- handle. When you call curl_easy_cleanup(), all the possibly open connections
- held by libcurl will be closed and forgotten.
-
- Note that the options set with curl_easy_setopt() will be used in on every
- repeat curl_easy_perform() call
-
-Compatibility with older libcurls
-
- Repeated curl_easy_perform() calls on the same handle were not supported in
- pre-7.7 versions, and caused confusion and defined behaviour.
-
--- a/docs/MANUAL
+++ b/docs/MANUAL
@@ -132,7 +132,7 @@ UPLOADING

  Upload all data on stdin to a specified ftp site:

-        curl -t ftp://ftp.upload.com/myfile
+        curl -T - ftp://ftp.upload.com/myfile

  Upload data from a specified file, login with user and password:

@@ -157,7 +157,7 @@ UPLOADING

  Upload all data on stdin to a specified http site:

-        curl -t http://www.upload.com/myfile
+        curl -T - http://www.upload.com/myfile

  Note that the http server must've been configured to accept PUT before this
  can be done successfully.
@@ -246,25 +246,25 @@ POST (HTTP)
  -F accepts parameters like -F "name=contents". If you want the contents to
  be read from a file, use <@filename> as contents. When specifying a file,
  you can also specify the file content type by appending ';type=<mime type>'
-  to the file name. You can also post the contents of several files in one field.
-  For example, the field name 'coolfiles' is used to send three  files, with
-  different content types using the following syntax:
+  to the file name. You can also post the contents of several files in one
+  field.  For example, the field name 'coolfiles' is used to send three files,
+  with different content types using the following syntax:

        curl -F "coolfiles=@fil1.gif;type=image/gif,fil2.txt,fil3.html" \
        http://www.post.com/postit.cgi

  If the content-type is not specified, curl will try to guess from the file
-  extension  (it only knows a few), or use the previously specified type
-  (from an earlier file if several files are specified in a list) or else it
-  will  using the default type 'text/plain'.
+  extension (it only knows a few), or use the previously specified type (from
+  an earlier file if several files are specified in a list) or else it will
+  using the default type 'text/plain'.

  Emulate a fill-in form with -F. Let's say you fill in three fields in a
  form. One field is a file name which to post, one field is your name and one
  field is a file description. We want to post the file we have written named
  "cooltext.txt". To let curl do the posting of this data instead of your
-  favourite browser, you have to read the HTML source of the form page and find
-  the names of the input fields. In our example, the input field names are
-  'file', 'yourname' and 'filedescription'.
+  favourite browser, you have to read the HTML source of the form page and
+  find the names of the input fields. In our example, the input field names
+  are 'file', 'yourname' and 'filedescription'.

        curl -F "file=@cooltext.txt" -F "yourname=Daniel" \
             -F "filedescription=Cool text file with cool text inside" \
@@ -591,7 +591,7 @@ HTTPS
    Run the 'openssl' application to convert the certificate. If you cd to the
    openssl installation, you can do it like:

-     # ./apps/openssl pkcs12 -certfile [file you saved] -out [PEMfile]
+     # ./apps/openssl pkcs12 -in [file you saved] -clcerts -out [PEMfile]


 RESUMING FILE TRANSFERS
@@ -601,15 +601,15 @@ RESUMING FILE TRANSFERS

 Continue downloading a document:

-        curl -c -o file ftp://ftp.server.com/path/file
+        curl -C - -o file ftp://ftp.server.com/path/file

 Continue uploading a document(*1):

-        curl -c -T file ftp://ftp.server.com/path/file
+        curl -C - -T file ftp://ftp.server.com/path/file

 Continue downloading a document from a web server(*2):

-        curl -c -o file http://www.server.com/
+        curl -C - -o file http://www.server.com/

 (*1) = This requires that the ftp server supports the non-standard command
        SIZE. If it doesn't, curl will say so.
@@ -668,8 +668,14 @@ LDAP
  and offer ldap:// support.

  LDAP is a complex thing and writing an LDAP query is not an easy task. I do
-  advice you to dig up the syntax description for that elsewhere, RFC 1959 if
-  no other place is better.
+  advice you to dig up the syntax description for that elsewhere. Two places
+  that might suit you are:
+
+  Netscape's "Netscape Directory SDK 3.0 for C Programmer's Guide Chapter 10:
+  Working with LDAP URLs":
+  http://developer.netscape.com/docs/manuals/dirsdk/csdk30/url.htm
+
+  RFC 2255, "The LDAP URL Format" http://www.rfc-editor.org/rfc/rfc2255.txt

  To show you an example, this is now I can get all people from my local LDAP
  server that has a certain sub-domain in their email address:
@@ -683,7 +689,7 @@ ENVIRONMENT VARIABLES

  Curl reads and understands the following environment variables:

-        HTTP_PROXY, HTTPS_PROXY, FTP_PROXY, GOPHER_PROXY
+        http_proxy, HTTPS_PROXY, FTP_PROXY, GOPHER_PROXY

  They should be set for protocol-specific proxies. General proxy should be
  set with
@@ -710,9 +716,9 @@ NETRC
  passwords, so therefor most unix programs won't read this file unless it is
  only readable by yourself (curl doesn't care though).

-  Curl supports .netrc files if told so (using the -n/--netrc option). This is
-  not restricted to only ftp, but curl can use it for all protocols where
-  authentication is used.
+  Curl supports .netrc files if told so (using the -n/--netrc and
+  --netrc-optional options). This is not restricted to only ftp,
+  but curl can use it for all protocols where authentication is used.

  A very simple .netrc file could look something like:

@@ -756,6 +762,17 @@ TELNET
  You might want the -N/--no-buffer option to switch off the buffered output
  for slow connections or similar.

+  Pass options to the telnet protocol negotiation, by using the -t option. To
+  tell the server we use a vt100 terminal, try something like:
+
+        curl -tTTYPE=vt100 telnet://remote.server.com
+
+  Other interesting options for it -t include:
+
+   - XDISPLOC=<X display> Sets the X display location.
+
+   - NEW_ENV=<var,val> Sets an environment variable.
+
  NOTE: the telnet protocol does not specify any way to login with a specified
  user and password so curl can't do that automatically. To do that, you need
  to track when the login prompt is received and send the username and
@@ -783,19 +800,39 @@ PERSISTANT CONNECTIONS
 MAILING LISTS

  For your convenience, we have several open mailing lists to discuss curl,
-  its development and things relevant to this.
+  its development and things relevant to this. Get all info at
+  http://curl.haxx.se/mail/. The lists available are:

-  To subscribe to the main curl list, mail curl-request@contactor.se with
-  "subscribe <fill in your email address>" in the body.
+  curl-users

-  To subscribe to the curl-library users/deverlopers list, follow the
-  instructions at http://curl.haxx.se/mail/
+    Users of the command line tool. How to use it, what doesn't work, new
+    features, related tools, questions, news, installations, compilations,
+    running, porting etc.

-  To subscribe to the curl-announce list, to only get information about new
-  releases, follow the instructions at http://curl.haxx.se/mail/
+  curl-library

-  To subscribe to the curl-and-PHP list in which curl using with PHP is
-  discussed, follow the instructions at http://curl.haxx.se/mail/
+    Developers using or developing libcurl. Bugs, extensions, improvements.
+
+  curl-announce
+
+    Low-traffic. Only announcements of new public versions.
+
+  curl-and-PHP
+
+    Using the curl functions in PHP. Everything curl with a PHP angle. Or PHP
+    with a curl angle.
+
+  curl-commits
+
+    Receives notifications on all CVS commits done to the curl source module.
+    This can become quite a large amount of mails during intense development,
+    be aware. This is for us who liks email...
+
+  curl-www-commits
+
+    Receives notifications on all CVS commits done to the curl www module
+    (basicly the web site).  This can become quite a large amount of mails
+    during intense changing, be aware. This is for us who liks email...

  Please direct curl questions, feature requests and trouble reports to one of
  these mailing lists instead of mailing any individual.
--- a/docs/Makefile.am
+++ b/docs/Makefile.am
@@ -6,30 +6,28 @@ AUTOMAKE_OPTIONS = foreign no-dependencies

 man_MANS = \
 	curl.1 \
-	curl-config.1 \
-	curl_easy_cleanup.3 \
-	curl_easy_getinfo.3 \
-	curl_easy_init.3 \
-	curl_easy_perform.3 \
-	curl_easy_setopt.3 \
-	curl_formparse.3 \
-	curl_formfree.3 \
-	curl_getdate.3 \
-	curl_getenv.3 \
-	curl_slist_append.3 \
-	curl_slist_free_all.3 \
-	curl_version.3 \
-	curl_escape.3 \
-	curl_unescape.3 \
-	curl_strequal.3 \
-	curl_strnequal.3 \
-	curl_mprintf.3 \
-	curl_global_init.3 \
-	curl_global_cleanup.3 \
-	libcurl.5
+	curl-config.1

-EXTRA_DIST = $(man_MANS) \
-	MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS \
-	LIBCURL README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS
+HTMLPAGES = \
+	curl.html \
+	curl-config.html

-SUBDIRS = examples
+SUBDIRS = examples libcurl
+
+EXTRA_DIST = MANUAL BUGS CONTRIBUTE FAQ FEATURES INTERNALS		\
+	     README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS	\
+	     VERSIONS KNOWN_BUGS BINDINGS $(man_MANS) $(HTMLPAGES) \
+	     HISTORY
+
+MAN2HTML= gnroff -man $< | man2html >$@
+
+SUFFIXES = .1 .3 .html
+
+html: $(HTMLPAGES)
+	cd libcurl; make html
+
+.3.html:
+	$(MAN2HTML)
+
+.1.html:
+	$(MAN2HTML)
--- a/docs/README.win32
+++ b/docs/README.win32
@@ -12,18 +12,11 @@ README.win32
  systems. While not being the main develop target, a fair share of curl users
  are win32-based.

-  Some documentation in this archive will be tricky to read for Windows
-  people, as they come in unix-style man pages. You can either download a
-  freely available nroff binary for win32 (*pointers appriciated*), convert
-  the files into plain-text on your neighbor's unix machine or run over to the
-  curl web site and view them as plain HTML.
+  The unix-style man pages are tricky to read on windows, so therefore are all
+  those pages also converted to HTML and those are also included in the
+  release archives.

-  The main curl.1 man page is "built-in". Use a command line similar to this
-  in order to extract a separate text file:
+  The main curl.1 man page is also "built-in" in the command line tool. Use a
+  command line similar to this in order to extract a separate text file:

        curl -M >manual.txt
-
-  Download all the libcurl man pages in HTML format using the link on the
-  bottom of this page:
-
-        http://curl.haxx.se/libcurl/c/
--- a/docs/RESOURCES
+++ b/docs/RESOURCES
@@ -5,10 +5,9 @@
                             \___|\___/|_| \_\_____|


-This document has been introduced in order to let you find documents that
-specify standards used by curl, software that extends curl, web pages with
-"competing" utilities and information pages that describe some of the tools
-that we use to build/compile/develop curl.
+This document lists documents that specify standards used by curl, software
+that extends curl, web pages with similar utilities and information pages that
+describe some of the tools that we use to build/compile/develop curl.

 Standards
 ---------
--- a/docs/THANKS
+++ b/docs/THANKS
@@ -53,7 +53,7 @@ that have contributed with non-trivial parts:
 - Albert Chin-A-Young <china@thewrittenword.com>
 - Stephen Kick <skick@epicrealm.com>
 - Martin Hedenfalk <mhe@stacken.kth.se>
- - Richard Prescott
+ - Richard Prescott <rip at step.polymtl.ca>
 - Jason S. Priebe <priebe@wral-tv.com>
 - T. Bharath <TBharath@responsenetworks.com>
 - Alexander Kourakos <awk@users.sourceforge.net>
@@ -69,3 +69,16 @@ that have contributed with non-trivial parts:
 - S. Moonesamy
 - Ingo Wilken <iw@WWW.Ecce-Terram.DE>
 - Pawel A. Gajda <mis@k2.net.pl>
+ - Patrick Bihan-Faou
+ - Nico Baggus <Nico.Baggus@mail.ing.nl>
+ - Sergio Ballestrero
+ - Andrew Francis <locust@familyhealth.com.au>
+ - Tomasz Lacki <Tomasz.Lacki@primark.pl>
+ - Georg Huettenegger <georg@ist.org>
+ - John Lask <johnlask@hotmail.com>
+ - Eric Lavigne <erlavigne@wanadoo.fr>
+ - Marcus Webster <marcus.webster@phocis.com>
+ - G<>tz Babin-Ebell <babin<69>ebell@trustcenter.de>
+ - Andreas Damm <andreas-sourceforge@radab.org>
+ - Jacky Lam <sylam@emsoftltd.com>
+ - James Gallagher <jgallagher@gso.uri.edu>
--- a/docs/TODO
+++ b/docs/TODO
@@ -6,52 +6,113 @@

 TODO

- Things to do in project cURL. Please tell me what you think, contribute and
- send me patches that improve things!
+ Things to do in project cURL. Please tell us what you think, contribute and
+ send us patches that improve things! Also check the http://curl.haxx.se/dev
+ web section for various technical development notes.

-To do in a future release (random order):
+ LIBCURL

- * Make SSL session ids get used if multiple HTTPS documents from the same
-   host is requested. Note: is this really prioritized now with the persistent
-   connections?
+ * Introduce an interface to libcurl that allows applications to easier get to
+   know what cookies that are received. Pushing interface that calls a
+   callback on each received cookie? Querying interface that asks about
+   existing cookies? We probably need both.

- * Suggested on the mailing list: CURLOPT_FTP_MKDIR...!
+ * Make content encoding/decoding internally be made using a filter system.

- * Rewrite parts of the test suite. Make a (XML?) format to store all
-   test-data in a single for a single test case. The current system makes far
-   too many separate files. We also need to have the test suite support
-   different behaviors, like when libcurl is compiled for IPv6 support and
-   thus performs a different set of FTP commands.
+ * Introduce another callback interface for upload/download that makes one
+   less copy of data and thus a faster operation.
+   [http://curl.haxx.se/dev/no_copy_callbacks.txt]

- * Add configure options that disables certain protocols in libcurl to
-   decrease footprint.  '--disable-[protocol]' where protocol is http, ftp,
-   telnet, ldap, dict or file.
+ * Run-time querying about library characterics. What protocols do this
+   running libcurl support? What is the version number of the running libcurl
+   (returning the well-defined version-#define). This could possibly be made
+   by allowing curl_easy_getinfo() work with a NULL pointer for global info,
+   but perhaps better would be to introduce a new curl_getinfo() (or similar)
+   function for global info reading.

- * Extend the test suite to include telnet. The telnet could just do ftp or
-   http operations (for which we have test servers).
+ * Add asynchronous name resolving (http://daniel.haxx.se/resolver/). This
+   should be made to work on most of the supported platforms, or otherwise it
+   isn't really interesting.

- * Add a command line option that allows the output file to get the same time
-   stamp as the remote file. libcurl already is capable of fetching the remote
-   file's date.
+ * Data sharing. Tell which easy handles within a multi handle that should
+   share cookies, connection cache, dns cache, ssl session cache.  Full
+   suggestion found here: http://curl.haxx.se/dev/sharing.txt

- * Make curl's SSL layer option capable of using other free SSL libraries.
-   Such as the Mozilla Security Services
-   (http://www.mozilla.org/projects/security/pki/nss/) and GNUTLS
-   (http://gnutls.hellug.gr/)
+ * Mutexes. By adding mutex callback support, the 'data sharing' mentioned
+   above can be made between several easy handles running in different threads
+   too. The actual mutex implementations will be left for the application to
+   implement, libcurl will merely call 'getmutex' and 'leavemutex' callbacks.
+   Part of the sharing suggestion at: http://curl.haxx.se/dev/sharing.txt

- * Add asynchronous name resolving, as this enables full timeout support for
-   fork() systems.
+ * Set the SO_KEEPALIVE socket option to make libcurl notice and disconnect
+   very long time idle connections.

- * Move non-URL related functions that are used by both the lib and the curl
-   application to a separate "portability lib".
+ * Go through the code and verify that libcurl deals with big files >2GB and
+   >4GB all over. Bug reports (and source reviews) indicate that it doesn't
+   currently work properly.

- * Add libcurl support/interfaces for more languages. C++ wrapper perhaps?
+ * Make the built-in progress meter use its own dedicated output stream, and
+   make it possible to set it. Use stderr by default.
+
+ * CURLOPT_MAXFILESIZE. Prevent downloads that are larger than the specified
+   size. CURLE_FILESIZE_EXCEEDED would then be returned. Gautam Mani
+   requested. That is, the download should even begin but be aborted
+   immediately.
+
+ * Allow the http_proxy (and other) environment variables to contain user and
+   password as well in the style: http://proxyuser:proxypasswd@proxy:port
+   Berend Reitsma suggested.
+
+ LIBCURL - multi interface
+
+ * Make sure we don't ever loop because of non-blocking sockets return
+   EWOULDBLOCK or similar. This concerns the HTTP request sending (and
+   especially regular HTTP POST), the FTP command sending etc.
+
+ * Make uploads treated better. We need a way to tell libcurl we have data to
+   write, as the current system expects us to upload data each time the socket
+   is writable and there is no way to say that we want to upload data soon
+   just not right now, without that aborting the upload.
+
+ DOCUMENTATION
+
+ * More and better
+
+ FTP
+
+ * FTP ASCII upload does not follow RFC959 section 3.1.1.1: "The sender
+   converts the data from an internal character representation to the standard
+   8-bit NVT-ASCII representation (see the Telnet specification).  The
+   receiver will convert the data from the standard form to his own internal
+   form."
+
+ * An option to only download remote FTP files if they're newer than the local
+   one is a good idea, and it would fit right into the same syntax as the
+   already working http dito works. It of course requires that 'MDTM' works,
+   and it isn't a standard FTP command.
+
+ * Add FTPS support with SSL for the data connection too.  This should be made
+   according to the specs written in draft-murray-auth-ftp-ssl-08.txt,
+   "Securing FTP with TLS"
+
+ HTTP
+
+ * HTTP PUT for files passed on stdin *OR* when the --crlf option is
+   used. Requires libcurl to send the file with chunked content
+   encoding. [http://curl.haxx.se/dev/HTTP-PUT-stdin.txt] When the filter
+   system mentioned above gets real, it'll be a piece of cake to add.
+
+ * Pass a list of host name to libcurl to which we allow the user name and
+   password to get sent to. Currently, it only get sent to the host name that
+   the first URL uses (to prevent others from being able to read it), but this
+   also prevents the authentication info from getting sent when following
+   locations to legitimate other host names.

 * "Content-Encoding: compress/gzip/zlib" HTTP 1.1 clearly defines how to get
   and decode compressed documents. There is the zlib that is pretty good at
   decompressing stuff. This work was started in October 1999 but halted again
   since it proved more work than we thought. It is still a good idea to
-   implement though.
+   implement though. This requires the filter system mentioned above.

 * Authentication: NTLM. Support for that MS crap called NTLM
   authentication. MS proxies and servers sometime require that. Since that
@@ -63,21 +124,103 @@ To do in a future release (random order):
   http://www.innovation.ch/java/ntlm.html that contains detailed reverse-
   engineered info.

- * RFC2617 compliance, "Digest Access Authentication"
-   A valid test page seem to exist at:
-   http://hopf.math.nwu.edu/testpage/digest/
-   And some friendly person's server source code is available at
-   http://hopf.math.nwu.edu/digestauth/index.html
-   Then there's the Apache mod_digest source code too of course.  It seems as
-   if Netscape doesn't support this, and not many servers do. Although this is
-   a lot better authentication method than the more common "Basic". Basic
-   sends the password in cleartext over the network, this "Digest" method uses
-   a challange-response protocol which increases security quite a lot.
+ * RFC2617 compliance, "Digest Access Authentication" A valid test page seem
+   to exist at: http://hopf.math.nwu.edu/testpage/digest/ And some friendly
+   person's server source code is available at
+   http://hopf.math.nwu.edu/digestauth/index.html Then there's the Apache
+   mod_digest source code too of course.  It seems as if Netscape doesn't
+   support this, and not many servers do. Although this is a lot better
+   authentication method than the more common "Basic". Basic sends the
+   password in cleartext over the network, this "Digest" method uses a
+   challange-response protocol which increases security quite a lot.

- * Other proxies
-   Ftp-kind proxy, Socks5, whatever kind of proxies are there?
+ * Pipelining. Sending multiple requests before the previous one(s) are done.
+   This could possibly be implemented using the multi interface to queue
+   requests and the response data.

- * Full IPv6 Awareness and support. (This is partly done.)  RFC 2428 "FTP
-   Extensions for IPv6 and NATs" is interesting. PORT should be replaced with
-   EPRT for IPv6 (done), and EPSV instead of PASV.
+ TELNET

+ * Make TELNET work on windows98!
+
+ * Reading input (to send to the remote server) on stdin is a crappy solution
+   for library purposes. We need to invent a good way for the application to
+   be able to provide the data to send.
+
+ * Move the telnet support's network select() loop go away and merge the code
+   into the main transfer loop. Until this is done, the multi interface won't
+   work for telnet.
+
+ SSL
+
+ * If you really want to improve the SSL situation, you should probably have a
+   look at SSL cafile loading as well - quick traces look to me like these are
+   done on every request as well, when they should only be necessary once per
+   ssl context (or once per handle). Even better would be to support the SSL
+   CAdir option - instead of loading all of the root CA certs for every
+   request, this option allows you to only read the CA chain that is actually
+   required (into the cache)...
+
+ * Add an interface to libcurl that enables "session IDs" to get
+   exported/imported. Cris Bailiff said: "OpenSSL has functions which can
+   serialise the current SSL state to a buffer of your choice, and
+   recover/reset the state from such a buffer at a later date - this is used
+   by mod_ssl for apache to implement and SSL session ID cache". This whole
+   idea might become moot if we enable the 'data sharing' as mentioned in the
+   LIBCURL label above.
+
+ * OpenSSL supports a callback for customised verification of the peer
+   certificate, but this doesn't seem to be exposed in the libcurl APIs. Could
+   it be? There's so much that could be done if it were! (brought by Chris
+   Clark)
+
+ * Make curl's SSL layer option capable of using other free SSL libraries.
+   Such as the Mozilla Security Services
+   (http://www.mozilla.org/projects/security/pki/nss/) and GNUTLS
+   (http://gnutls.hellug.gr/)
+
+ LDAP
+
+ * Look over the implementation. The looping will have to "go away" from the
+   lib/ldap.c source file and get moved to the main network code so that the
+   multi interface and friends will work for LDAP as well.
+
+ CLIENT
+
+ * Add an option that prevents cURL from overwiting existing local files. When
+   used, and there already is an existing file with the target file name
+   (either -O or -o), a number should be appended (and increased if already
+   existing). So that index.html becomes first index.html.1 and then
+   index.html.2 etc. Jeff Pohlmeyer suggested.
+
+ * "curl ftp://site.com/*.txt"
+
+ * Several URLs can be specified to get downloaded. We should be able to use
+   the same syntax to specify several files to get uploaded (using the same
+   persistant connection), using -T.
+
+ * When the multi interface has been implemented and proved to work, the
+   client could be told to use maximum N simultaneous transfers and then just
+   make sure that happens. It should of course not make more than one
+   connection to the same remote host.
+
+ * Extending the capabilities of the multipart formposting. How about leaving
+   the ';type=foo' syntax as it is and adding an extra tag (headers) which
+   works like this: curl -F "coolfiles=@fil1.txt;headers=@fil1.hdr" where
+   fil1.hdr contains extra headers like
+
+     Content-Type: text/plain; charset=KOI8-R"
+     Content-Transfer-Encoding: base64
+     X-User-Comment: Please don't use browser specific HTML code
+
+   which should overwrite the program reasonable defaults (plain/text,
+   8bit...) (Idea brough to us by kromJx)
+
+ TEST SUITE
+
+ * Extend the test suite to include more protocols. The telnet could just do
+   ftp or http operations (for which we have test servers).
+
+ * Make the test suite work on more platforms. OpenBSD and Mac OS. Remove
+   fork()s and it should become even more portable.
+
+ * Introduce a test suite that tests libcurl better and more explicitly.
--- a/docs/TheArtOfHttpScripting
+++ b/docs/TheArtOfHttpScripting
@@ -1,6 +1,7 @@
+Online:  http://curl.haxx.se/docs/httpscripting.shtml
 Author:  Daniel Stenberg <daniel@haxx.se>
-Date:    September 15, 2000
-Version: 0.3
+Date:    October 31, 2001
+Version: 0.5

                The Art Of Scripting HTTP Requests Using Curl
                =============================================
@@ -47,7 +48,7 @@ Version: 0.3
 2. URL

 The Uniform Resource Locator format is how you specify the address of a
- particular resource on the internet. You know these, you've seen URLs like
+ particular resource on the Internet. You know these, you've seen URLs like
 http://curl.haxx.se or https://yourbank.com a million times.

 3. GET a page
@@ -55,7 +56,7 @@ Version: 0.3
 The simplest and most common request/operation made using HTTP is to get a
 URL. The URL could itself refer to a web page, an image or a file. The client
 issues a GET request to the server and receives the document it asked for.
- If you isse the command line
+ If you issue the command line

        curl http://curl.haxx.se

@@ -88,7 +89,7 @@ Version: 0.3
          <input type=submit name=press value="OK">
        </form>

-  In your favourite browser, this form will appear with a text box to fill in
+  In your favorite browser, this form will appear with a text box to fill in
  and a press-button labeled "OK". If you fill in '1905' and press the OK
  button, your browser will then create a new URL to get for you. The URL will
  get "junk.cgi?birthyear=1905&press=OK" appended to the path part of the
@@ -135,8 +136,8 @@ Version: 0.3
 4.3 FILE UPLOAD POST

  Back in late 1995 they defined a new way to post data over HTTP. It was
-  documented in the RFC 1867, why this method sometimes is refered to as
-  a rfc1867-posting.
+  documented in the RFC 1867, why this method sometimes is referred to as
+  a RFC1867-posting.

  This method is mainly designed to better support file uploads. A form that
  allows a user to upload a file could be written like this in HTML:
@@ -174,6 +175,19 @@ Version: 0.3

        curl -d "birthyear=1905&press=OK&person=daniel" [URL]

+ 4.5 FIGURE OUT WHAT A POST LOOKS LIKE
+
+  When you're about fill in a form and send to a server by using curl instead
+  of a browser, you're of course very interested in sending a POST exactly the
+  way your browser does.
+
+  An easy way to get to see this, is to save the HTML page with the form on
+  your local disk, modify the 'method' to a GET, and press the submit button
+  (you could also change the action URL if you want to).
+
+  You will then clearly see the data get appended to the URL, separated with a
+  '?'-letter as GET forms are supposed to.
+
 5. PUT

 The perhaps best way to upload data to a HTTP server is to use PUT. Then
@@ -182,7 +196,7 @@ Version: 0.3

 Put a file to a HTTP server with curl:

-        curl -t uploadfile www.uploadhttp.com/receive.cgi
+        curl -T uploadfile www.uploadhttp.com/receive.cgi

 6. AUTHENTICATION

@@ -200,7 +214,7 @@ Version: 0.3
 Sometimes your HTTP access is only available through the use of a HTTP
 proxy. This seems to be especially common at various companies. A HTTP proxy
 may require its own user and password to allow the client to get through to
- the internet. To specify those with curl, run something like:
+ the Internet. To specify those with curl, run something like:

        curl -U proxyuser:proxypassword curl.haxx.se

@@ -280,7 +294,7 @@ Version: 0.3
 contents to the server, unless of course they are expired.

 Many applications and servers use this method to connect a series of requests
- into a single logical session. To be able to use curl in such occations, we
+ into a single logical session. To be able to use curl in such occasions, we
 must be able to record and send back cookies the way the web application
 expects them. The same way browsers deal with them.

@@ -289,7 +303,6 @@ Version: 0.3

        curl -b "name=Daniel" www.cookiesite.com

-
 Cookies are sent as common HTTP headers. This is practical as it allows curl
 to record cookies simply by recording headers. Record cookies with curl by
 using the -D option like:
@@ -304,6 +317,23 @@ Version: 0.3

        curl -b stored_cookies_in_file www.cookiesite.com

+ Curl's "cookie engine" gets enabled when you use the -b option. If you only
+ want curl to understand received cookies, use -b with a file that doesn't
+ exist. Example, if you want to let curl understand cookies from a page and
+ follow a location (and thus possibly send back cookies it received), you can
+ invoke it like:
+
+        curl -b nada -L www.cookiesite.com
+
+ Curl has the ability to read and write cookie files that use the same file
+ format that Netscape and Mozilla do. It is a convenient way to share cookies
+ between browsers and automatic scripts. The -b switch automatically detects
+ if a given file is such a cookie file and parses it, and by using the
+ -c/--cookie-jar option you'll make curl write a new cookie file at the end of
+ an operation:
+
+        curl -b cookies.txt -c newcookies.txt www.cookiesite.com
+
 11. HTTPS

 There are a few ways to do secure HTTP transfers. The by far most common
@@ -328,7 +358,7 @@ Version: 0.3
  you need to enter the unlock-code before the certificate can be used by
  curl. The PIN-code can be specified on the command line or if not, entered
  interactively when curl queries for it. Use a certificate with curl on a
-  https server like:
+  HTTPS server like:

        curl -E mycert.pem https://that.secure.server.com

@@ -337,10 +367,12 @@ Version: 0.3
 RFC 2616 is a must to read if you want in-depth understanding of the HTTP
 protocol.

- RFC 2396 explains the URL syntax
+ RFC 2396 explains the URL syntax.

 RFC 2109 defines how cookies are supposed to work.

+ RFC 1867 defines the HTTP post upload format.
+
 http://www.openssl.org is the home of the OpenSSL project

 http://curl.haxx.se is the home of the cURL project
--- a/docs/VERSIONS
+++ b/docs/VERSIONS
@@ -0,0 +1,64 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+Version Numbers and Releases
+
+ Curl is not only curl. Curl is also libcurl. They're actually individually
+ versioned, but they mostly follow each other rather closely.
+
+ The version numbering is always built up using the same system:
+
+        X.Y[.Z][-preN]
+
+ Where
+   X is main version number
+   Y is release number
+   Z is patch number
+   N is pre-release number
+
+ One of these numbers will get bumped in each new release. The numbers to the
+ right of a bumped number will be reset to zero. If Z is zero, it is not
+ included in the version number. The pre release number is only included in
+ pre releases (they're never used in public, official, releases).
+
+ The main version number will get bumped when *really* big, world colliding
+ changes are made. The release number is bumped when big changes are
+ performed. The patch number is bumped when the changes are mere bugfixes and
+ only minor feature changes. The pre-release is a counter, to identify which
+ pre-release a certain release is.
+
+ When reaching the end of a pre-release period, the version without the
+ pre-release part will be released as a public release.
+
+ It means that after release 1.2.3, we can release 2.0 if something really big
+ has been made, 1.3 if not that big changes were made or 1.2.4 if mostly bugs
+ were fixed. Before 1.2.4 is released, we might release a 1.2.4-pre1 release
+ for the brave people to try before the actual release.
+
+ Bumping, as in increasing the number with 1, is unconditionally only
+ affecting one of the numbers (except the ones to the right of it, that may be
+ set to zero). 1 becomes 2, 3 becomes 4, 9 becomes 10, 88 becomes 89 and 99
+ becomes 100. So, after 1.2.9 comes 1.2.10. After 3.99.3, 3.100 might come.
+
+ All original curl source release archives are named according to the libcurl
+ version (not according to the curl client version that, as said before, might
+ differ).
+
+ As a service to any application that might want to support new libcurl
+ features while still being able to build with older versions, all releases
+ have the libcurl version stored in the curl/curl.h file using a static
+ numbering scheme that can be used for comparison. The version number is
+ defined as:
+        
+        #define LIBCURL_VERSION_NUM 0xXXYYZZ
+
+ Where XX, YY and ZZ are the main version, release and patch numbers in
+ hexadecimal. All three numbers are always represented using two digits.  1.2
+ would appear as "0x010200" while version 9.11.7 appears as "0x090b07".
+
+ This 6-digit hexadecimal number does not show pre-release number, and it is
+ always a greater number in a more recent release. It makes comparisons with
+ greater than and less than work.
--- a/docs/curl-config.1
+++ b/docs/curl-config.1
@@ -2,7 +2,7 @@
 .\" nroff -man curl-config.1
 .\" Written by Daniel Stenberg
 .\"
-.TH curl-config 1 "28 May 2001" "Curl 7.8" "curl-config manual"
+.TH curl-config 1 "21 January 2002" "Curl 7.9.3" "curl-config manual"
 .SH NAME
 curl-config \- Get information about a libcurl installation
 .SH SYNOPSIS
@@ -11,9 +11,11 @@ curl-config \- Get information about a libcurl installation
 .B curl-config
 displays information about a previous curl and libcurl installation.
 .SH OPTIONS
+.IP "--cc"
+Displays the compiler used to build libcurl.
 .IP "--cflags"
-What set of CFLAGS that was used when libcurl was built. This is mostly a
-debug option that serves no particular use to most people.
+Set of compiler options (CFLAGS) to use when compiling files that use
+libcurl. Currently that is only thw include path to the curl include files.
 .IP "--feature"
 Lists what particular main features the installed libcurl was built with. At
 the time of writing, this list may include SSL, KRB4 or IPv6. Do not assume
@@ -36,24 +38,25 @@ This outputs the version number, in hexadecimal, with 8 bits for each part;
 major, minor, patch. So that libcurl 7.7.4 would appear as 070704 and libcurl
 12.13.14 would appear as 0c0d0e...
 .SH "EXAMPLES"
-What is the path to the curl header files?
+What linker options do I need when I link with libcurl?

-  echo `curl-config --prefix`/include
+  $ curl-config --libs

-What is the path to libcurl?
+What compiler options do I need when I compile using libcurl functions?

-  echo `curl-config --prefix`/lib
-
-What other linker options do I need when I link with libcurl?
-
-  curl-config --libs
+  $ curl-config --cflags

 How do I know if libcurl was built with SSL support?

-  curl-config --feature | grep SSL
+  $ curl-config --feature | grep SSL

 What's the installed libcurl version?

-  curl-config --version
+  $ curl-config --version
+
+How do I build a single file with a one-line command?
+
+  $ `curl-config --cc --cflags --libs` -o example example.c
+
 .SH "SEE ALSO"
 .BR curl (1)
--- a/docs/curl.1
+++ b/docs/curl.1
@@ -2,10 +2,9 @@
 .\" nroff -man curl.1
 .\" Written by Daniel Stenberg
 .\"
-.TH curl 1 "8 May 2001" "Curl 7.7.3" "Curl Manual"
+.TH curl 1 "11 Sep 2002" "Curl 7.10" "Curl Manual"
 .SH NAME
-curl \- get a URL with FTP, TELNET, LDAP, GOPHER, DICT, FILE, HTTP or
-HTTPS syntax.
+curl \- transfer a URL
 .SH SYNOPSIS
 .B curl [options]
 .I [URL...]
@@ -91,34 +90,42 @@ also be enforced by using an URL that ends with ";type=A". This option causes
 data sent to stdout to be in text mode for win32 systems.

 If this option is used twice, the second one will disable ASCII usage.
+.IP "--ciphers <list of ciphers>"
+(SSL) Specifies which ciphers to use in the connection. The list of ciphers
+must be using valid ciphers. Read up on SSL cipher list details on this URL:
+.I http://www.openssl.org/docs/apps/ciphers.html (Option added in curl 7.9)
+
+If this option is used several times, the last one will override the others.
 .IP "--connect-timeout <seconds>"
 Maximum time in seconds that you allow the connection to the server to take.
 This only limits the connection phase, once curl has connected this option is
-of no more use. This option didn't work in win32 systems until 7.7.2.  See
-also the
-.I "--max-time"
-option.
+of no more use. See also the \fI--max-time\fP option.

 If this option is used several times, the last one will be used.
-.IP "-c/--continue"
-.B Deprecated. Use '-C -' instead.
-Continue/Resume a previous file transfer. This instructs curl to
-continue appending data on the file where it was previously left,
-possibly because of a broken connection to the server. There must be
-a named physical file to append to for this to work.
-Note: Upload resume is depening on a command named SIZE not always
-present in all ftp servers! Upload resume is for FTP only.
-HTTP resume is only possible with HTTP/1.1 or later servers.
+.IP "-c/--cookie-jar <file name>"
+Specify to which file you want curl to write all cookies after a completed
+operation. Curl writes all cookies previously read from a specified file as
+well as all cookies received from remote server(s). If no cookies are known,
+no file will be written. The file will be written using the Netscape cookie
+file format. If you set the file name to a single dash, "-", the cookies will
+be written to stdout. (Option added in curl 7.9)
+
+If this option is used several times, the last specfied file name will be
+used.
 .IP "-C/--continue-at <offset>"
-Continue/Resume a previous file transfer at the given offset. The
-given offset is the exact number of bytes that will be skipped
-counted from the beginning of the source file before it is transfered
-to the destination.
-If used with uploads, the ftp server command SIZE will not be used by
-curl. Upload resume is for FTP only.
-HTTP resume is only possible with HTTP/1.1 or later servers.
+Continue/Resume a previous file transfer at the given offset. The given offset
+is the exact number of bytes that will be skipped counted from the beginning
+of the source file before it is transfered to the destination.  If used with
+uploads, the ftp server command SIZE will not be used by curl.
+
+Use "-C -" to tell curl to automatically find out where/how to resume the
+transfer. It then uses the given output/input files to figure that out.

 If this option is used several times, the last one will be used.
+.IP "--crlf"
+(FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).
+
+If this option is used twice, the second will again disable crlf converting.
 .IP "-d/--data <data>"
 (HTTP) Sends the specified data in a POST request to the HTTP server, in a way
 that can emulate as if a user has filled in a HTML form and pressed the submit
@@ -134,7 +141,8 @@ name=daniel -d skill=lousy' would generate a post chunk that looks like
 If you start the data with the letter @, the rest should be a file name to
 read the data from, or - if you want curl to read the data from stdin.  The
 contents of the file must already be url-encoded. Multiple files can also be
-specified.
+specified. Posting data from a file named 'foobar' would thus be done with
+"--data @foobar".

 To post data purely binary, you should instead use the --data-binary option.

@@ -153,19 +161,24 @@ using this option the entire context of the posted data is kept as-is. If you
 want to post a binary file without the strip-newlines feature of the
 --data-ascii option, this is for you.

-If this option is used several times, the last one will be used.
-
 If this option is used several times, the ones following the first will
 append data.
+.IP "--disable-epsv"
+(FTP) Tell curl to disable the use of the EPSV command when doing passive FTP
+downloads. Curl will normally always first attempt to use EPSV before PASV,
+but with this option, it will not try using EPSV.
+
+If this option is used several times, each occurrence will toggle this on/off.
 .IP "-D/--dump-header <file>"
-(HTTP/FTP)
-Write the HTTP headers to this file. Write the FTP file info to this
-file if -I/--head is used.
+Write the protocol headers to the specified file.

 This option is handy to use when you want to store the cookies that a HTTP
 site sends to you. The cookies could then be read in a second curl invoke by
 using the -b/--cookie option!

+When used on FTP, the ftp server response lines are considered being "headers"
+and thus are saved there.
+
 If this option is used several times, the last one will be used.
 .IP "-e/--referer <URL>"
 (HTTP) Sends the "Referer Page" information to the HTTP server. This can also
@@ -176,6 +189,12 @@ previous URL when it follows a Location: header. The ";auto" string can be
 used alone, even if you don't set an initial referer.

 If this option is used several times, the last one will be used.
+.IP "--environment"
+(RISC OS ONLY) Sets a range of environment variables, using the names the -w
+option supports, to easier allow extraction of useful information after having
+run curl.
+
+If this option is used several times, each occurrence will toggle this on/off.
 .IP "--egd-file <file>"
 (HTTPS) Specify the path name to the Entropy Gathering Daemon socket. The
 socket is used to seed the random engine for SSL connections. See also the
@@ -192,17 +211,25 @@ certificate concatenated!
 If this option is used several times, the last one will be used.
 .IP "--cacert <CA certificate>"
 (HTTPS) Tells curl to use the specified certificate file to verify the
-peer. The certificate must be in PEM format.
+peer. The file may contain multiple CA certificates. The certificate(s) must
+be in PEM format.
+
+If this option is used several times, the last one will be used.
+.IP "--capath <CA certificate directory>"
+(HTTPS) Tells curl to use the specified certificate directory to verify the
+peer. The certificates must be in PEM format, and the directory must have been 
+processed using the c_rehash utility supplied with openssl. Certificate directories
+are not supported under Windows (because c_rehash uses symbolink links to
+create them). Using --capath can allow curl to make https connections much
+more efficiently than using --cacert if the --cacert file contains many CA certificates.

 If this option is used several times, the last one will be used.
 .IP "-f/--fail"
-(HTTP)
-Fail silently (no output at all) on server errors. This is mostly done
-like this to better enable scripts etc to better deal with failed
-attempts. In normal cases when a HTTP server fails to deliver a
-document, it returns a HTML document stating so (which often also
-describes why and more). This flag will prevent curl from
-outputting that and fail silently instead.
+(HTTP) Fail silently (no output at all) on server errors. This is mostly done
+like this to better enable scripts etc to better deal with failed attempts. In
+normal cases when a HTTP server fails to deliver a document, it returns a HTML
+document stating so (which often also describes why and more). This flag will
+prevent curl from outputting that and fail silently instead.

 If this option is used twice, the second will again disable silent failure.
 .IP "-F/--form <name=content>"
@@ -230,8 +257,17 @@ This option can be used multiple times.
 This option switches off the "URL globbing parser". When you set this option,
 you can specify URLs that contain the letters {}[] without having them being
 interpreted by curl itself. Note that these letters are not normal legal URL
-contents but they should be encoded according to the URI standard. (Option
-added in curl 7.6)
+contents but they should be encoded according to the URI standard.
+.IP "-G/--get"
+When used, this option will make all data specified with -d/--data or
+--data-binary to be used in a HTTP GET request instead of the POST request
+that otherwise would be used. The data will be appended to the URL with a '?'
+separator. (Option added in curl 7.9)
+
+If used in combination with -I, the POST data will instead be appended to the
+URL with a HEAD request.
+
+If used multiple times, nothing special happens.
 .IP "-h/--help"
 Usage help.
 .IP "-H/--header <header>"
@@ -244,7 +280,7 @@ set headers without knowing perfectly well what you're doing. Replacing an
 internal header with one without content on the right side of the colon will
 prevent that header from appearing.

-This option can be used multiple times.
+This option can be used multiple times to add/replace/remove multiple headers.
 .IP "-i/--include"
 (HTTP)
 Include the HTTP-header in the output. The HTTP-header includes things
@@ -265,6 +301,21 @@ which this uses to get nothing but the header of a document. When used
 on a FTP file, curl displays the file size only.

 If this option is used twice, the second will again disable header only.
+.IP "-j/--junk-session-cookies"
+(HTTP) When curl is told to read cookies from a given file, this option will
+make it discard all "session cookies". This will basicly have the same effect
+as if a new session is started. Typical browsers always discard session
+cookies when they're closed down. (Added in 7.9.7)
+
+If this option is used several times, each occurrence will toggle this on/off.
+.IP "-k/--insecure"
+(SSL) This option explicitly allows curl to perform "insecure" SSL connections
+and transfers. Starting with curl 7.10, all SSL connections will be attempted
+to be made secure by using the CA certificate bundle installed by
+default. This makes all connections considered "insecure" to fail unless
+-k/--insecure is used.
+
+If this option is used twice, the second time will again disable it.
 .IP "--krb4 <level>"
 (FTP) Enable kerberos4 authentication and use. The level must be entered and
 should be one of 'clear', 'safe', 'confidential' or 'private'. Should you use
@@ -282,7 +333,26 @@ treated as a comment.

 Specify the filename as '-' to make curl read the file from stdin.

+Note that to be able to specify a URL in the config file, you need to specify
+it using the --url option, and not by simply writing the URL on its own
+line. So, it could look similar to this:
+
+url = "http://curl.haxx.se/docs/"
+
 This option can be used multiple times.
+.IP "--limit-rate <speed>"
+Specify the maximum transfer rate you want curl to use. This feature is useful
+if you have a limited pipe and you'd prefer you have your transfer not use
+your entire bandwidth.
+
+The given speed is measured in bytes/second, unless a suffix is
+appended. Appending 'k' or 'K' will count the number as kilobytes, 'm' or M'
+makes it megabytes while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and
+1G.
+
+This option was introduced in curl 7.9.9.
+
+If this option is used several times, the last one will be used.
 .IP "-l/--list-only"
 (FTP)
 When listing an FTP directory, this switch forces a name-only view.
@@ -290,6 +360,10 @@ Especially useful if you want to machine-parse the contents of an FTP
 directory since the normal directory view doesn't use a standard look
 or format.

+This option causes an FTP NLST command to be sent.  Some FTP servers
+list only files in their response to NLST; they do not include
+subdirectories and symbolic links.
+
 If this option is used twice, the second will again disable list only.
 .IP "-L/--location"
 (HTTP/HTTPS) If the server reports that the requested page has a different
@@ -303,10 +377,8 @@ If this option is used twice, the second will again disable location following.
 .IP "-m/--max-time <seconds>"
 Maximum time in seconds that you allow the whole operation to take.  This is
 useful for preventing your batch jobs from hanging for hours due to slow
-networks or links going down.  This doesn't work fully in win32 systems.
-See also the
-.I "--connect-timeout"
-option.
+networks or links going down.  This doesn't work fully in win32 systems.  See
+also the \fI--connect-timeout\fP option.

 If this option is used several times, the last one will be used.
 .IP "-M/--manual"
@@ -318,6 +390,8 @@ file in the user's home directory for login name and password. This is
 typically used for ftp on unix. If used with http, curl will enable user
 authentication. See
 .BR netrc(4)
+or
+.BR ftp(1)
 for details on the file format. Curl will not complain if that file
 hasn't the right permissions (it should not be world nor group
 readable). The environment variable "HOME" is used to find the home
@@ -446,6 +520,12 @@ FTP range downloads only support the simple syntax 'start-stop' (optionally
 with one of the numbers omitted). It depends on the non-RFC command SIZE.

 If this option is used several times, the last one will be used.
+.IP "-R/--remote-time"
+When used, this will make libcurl attempt to figure out the timestamp of the
+remote file, and if that is available make the local file get that same
+timestamp.
+
+If this option is used twice, the second time disables this again.
 .IP "-s/--silent"
 Silent mode. Don't show progress meter or error messages.  Makes
 Curl mute.
@@ -455,6 +535,12 @@ If this option is used twice, the second will again disable mute.
 When used with -s it makes curl show error message if it fails.

 If this option is used twice, the second will again disable show error.
+.IP "--stderr <file>"
+Redirect all writes to stderr to the specified file instead. If the file name
+is a plain '-', it is instead written to stdout. This option has no point when
+you're using a shell with decent redirecting capabilities.
+
+If this option is used several times, the last one will be used.
 .IP "-t/--telnet-option <OPT=val>"
 Pass options to the telnet protocol. Supported options are:

@@ -464,15 +550,34 @@ XDISPLOC=<X display> Sets the X display location.

 NEW_ENV=<var,val> Sets an environment variable.
 .IP "-T/--upload-file <file>"
-Like -t, but this transfers the specified local file. If there is no
-file part in the specified URL, Curl will append the local file
-name. NOTE that you must use a trailing / on the last directory to
-really prove to Curl that there is no file name or curl will
-think that your last directory name is the remote file name to
-use. That will most likely cause the upload operation to fail. If
+This transfers the specified local file to the remote URL. If there is no file
+part in the specified URL, Curl will append the local file name. NOTE that you
+must use a trailing / on the last directory to really prove to Curl that there
+is no file name or curl will think that your last directory name is the remote
+file name to use. That will most likely cause the upload operation to fail. If
 this is used on a http(s) server, the PUT command will be used.

+Use the file name "-" (a single dash) to use stdin instead of a given file.
+
 If this option is used several times, the last one will be used.
+.IP "--trace <file>"
+Enables a full trace dump of all incoming and outgoing data, including
+descriptive information, to the given output file. Use "-" as filename to have
+the output sent to stdout.
+
+If this option is used several times, the last one will be used. (Added in
+curl 7.9.7)
+.IP "--trace-ascii <file>"
+Enables a full trace dump of all incoming and outgoing data, including
+descriptive information, to the given output file. Use "-" as filename to have
+the output sent to stdout.
+
+This is very similar to --trace, but leaves out the hex part and only shows
+the ASCII part of the dump. It makes smaller output that might be easier to
+read for untrained humans.
+
+If this option is used several times, the last one will be used. (Added in
+curl 7.9.7)
 .IP "-u/--user <user:password>"
 Specify user and password to use when fetching. See README.curl for detailed
 examples of how to use this. If no password is specified, curl will
@@ -485,7 +590,7 @@ password is specified, curl will ask for it interactively.

 If this option is used several times, the last one will be used.
 .IP "--url <URL>"
-Specify a URL to fetch. This option is mostly handy when you wanna specify
+Specify a URL to fetch. This option is mostly handy when you want to specify
 URL(s) in a config file.

 This option may be used any number of times. To control where this URL is written, use the
@@ -494,10 +599,13 @@ or the
 .I -O
 options.
 .IP "-v/--verbose"
-Makes the fetching more verbose/talkative. Mostly usable for
-debugging. Lines starting with '>' means data sent by curl, '<'
-means data received by curl that is hidden in normal cases and lines
-starting with '*' means additional info provided by curl.
+Makes the fetching more verbose/talkative. Mostly usable for debugging. Lines
+starting with '>' means data sent by curl, '<' means data received by curl
+that is hidden in normal cases and lines starting with '*' means additional
+info provided by curl.
+
+Note that if you want to see HTTP headers in the output, \fI-i/--include\fP
+might be option you're looking for.

 If this option is used twice, the second will again disable verbose.
 .IP "-V/--version"
@@ -513,7 +621,7 @@ write "@-".
 The variables present in the output format will be substituted by the value or
 text that curl thinks fit, as described below. All variables are specified
 like %{variable_name} and to output a normal % you just write them like
-%%. You can output a newline by using \\n, a carrige return with \\r and a tab
+%%. You can output a newline by using \\n, a carriage return with \\r and a tab
 space with \\t.

 .B NOTE:
@@ -547,6 +655,11 @@ The time, in seconds, it took from the start until the file transfer is just
 about to begin. This includes all pre-transfer commands and negotiations that
 are specific to the particular protocol(s) involved.
 .TP
+.B time_starttransfer
+The time, in seconds, it took from the start until the first byte is just about
+to be transfered. This includes time_pretransfer and also the time the
+server needs to calculate the result.
+.TP
 .B size_download
 The total amount of bytes that were downloaded.
 .TP
@@ -564,12 +677,24 @@ The average download speed that curl measured for the complete download.
 .TP
 .B speed_upload
 The average upload speed that curl measured for the complete upload.
+.TP
+.B content_type
+The Content-Type of the requested document, if there was any. (Added in 7.9.5)
 .RE

 If this option is used several times, the last one will be used.
 .IP "-x/--proxy <proxyhost[:port]>"
-Use specified proxy. If the port number is not specified, it is assumed at
-port 1080.
+Use specified HTTP proxy. If the port number is not specified, it is assumed
+at port 1080.
+
+This option overrides existing environment variables that sets proxy to
+use. If there's an environment variable setting a proxy, you can set proxy to
+"" to override it.
+
+\fBNote\fP that all operations that are performed over a HTTP proxy will
+transparantly be converted to HTTP. It means that certain protocol specific
+operations might not be available. This is not the case if you can tunnel
+through the proxy, as done with the \fI-p/--proxytunnel\fP option.

 If this option is used several times, the last one will be used.
 .IP "-X/--request <command>"
@@ -588,6 +713,9 @@ If a download is slower than speed-limit bytes per second during a speed-time
 period, the download gets aborted. If speed-time is used, the default
 speed-limit will be 1 unless set with -y.

+This option controls transfers and thus will not affect slow connects etc. If
+this is a concern for you, try the \fI--connect-timeout\fP option.
+
 If this option is used several times, the last one will be used.
 .IP "-Y/--speed-limit <speed>"
 If a download is slower than this given speed, in bytes per second, for
@@ -610,6 +738,12 @@ Start the date expression with a dash (-) to make it request for a document
 that is older than the given date/time, default is a document that is newer
 than the specified date/time.

+If this option is used several times, the last one will be used.
+.IP "-Z/--max-redirs <num>"
+Set maximum number of redirection-followings allowed. If -L/--location is
+used, this option can be used to prevent curl from following redirections "in
+absurdum".
+
 If this option is used several times, the last one will be used.
 .IP "-3/--sslv3"
 (HTTPS)
@@ -617,28 +751,21 @@ Forces curl to use SSL version 3 when negotiating with a remote SSL server.
 .IP "-2/--sslv2"
 (HTTPS)
 Forces curl to use SSL version 2 when negotiating with a remote SSL server.
+.IP "-0/--http1.0"
+(HTTP) Forces curl to issue its requests using HTTP 1.0 instead of using its
+internally preferred: HTTP 1.1.
 .IP "-#/--progress-bar"
 Make curl display progress information as a progress bar instead of the
 default statistics.

 If this option is used twice, the second will again disable the progress bar.
-.IP "--crlf"
-(FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).
-
-If this option is used twice, the second will again disable crlf converting.
-.IP "--stderr <file>"
-Redirect all writes to stderr to the specified file instead. If the file name
-is a plain '-', it is instead written to stdout. This option has no point when
-you're using a shell with decent redirecting capabilities.
-
-If this option is used several times, the last one will be used.
 .SH FILES
 .I ~/.curlrc
 .RS
 Default config file.

 .SH ENVIRONMENT
-.IP "HTTP_PROXY [protocol://]<host>[:port]"
+.IP "http_proxy [protocol://]<host>[:port]"
 Sets proxy server to use for HTTP.
 .IP "HTTPS_PROXY [protocol://]<host>[:port]"
 Sets proxy server to use for HTTPS.
@@ -649,11 +776,8 @@ Sets proxy server to use for GOPHER.
 .IP "ALL_PROXY [protocol://]<host>[:port]"
 Sets proxy server to use if no protocol-specific proxy is set.
 .IP "NO_PROXY <comma-separated list of hosts>"
-list of host names that shouldn't go through any proxy. If set to a
-asterisk '*' only, it matches all hosts.
-.IP "COLUMNS <integer>"
-The width of the terminal.  This variable only affects curl when the
--progress-bar option is used.
+list of host names that shouldn't go through any proxy. If set to a asterisk
+'*' only, it matches all hosts.
 .SH EXIT CODES
 There exists a bunch of different error codes and their corresponding error
 messages that may appear during bad conditions. At the time of this writing,
@@ -753,13 +877,35 @@ Internal error. A function was called in a bad order.
 .IP 45
 Interface error. A specified outgoing interface could not be used.
 .IP 46
-Bad password entered. An error was signalled when the password was entered.
+Bad password entered. An error was signaled when the password was entered.
 .IP 47
 Too many redirects. When following redirects, curl hit the maximum amount.
 .IP 48
 Unknown TELNET option specified.
 .IP 49
 Malformed telnet option.
+.IP 51
+The remote peer's SSL certificate wasn't ok
+.IP 52
+The server didn't reply anything, which here is considered an error.
+.IP 53
+SSL crypto engine not found
+.IP 54
+Cannot set SSL crypto engine as default
+.IP 55
+Failed sending network data
+.IP 56
+Failure in receiving network data
+.IP 57
+Share is in use (internal error)
+.IP 58
+Problem with the local certificate
+.IP 59
+Couldn't use specified SSL cipher
+.IP 60
+Problem with the CA cert (path? permission?)
+.IP 61
+Unrecognized transfer encoding
 .IP XX
 There will appear more error codes here in future releases. The existing ones
 are meant to never change.
--- a/docs/curl_easy_cleanup.3
+++ b/docs/curl_easy_cleanup.3
@@ -1,29 +0,0 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_easy_cleanup 3 "5 March 2001" "libcurl 7.7" "libcurl Manual"
-.SH NAME
-curl_easy_cleanup - End a libcurl session
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "curl_easy_cleanup(CURL *" handle ");"
-.ad
-.SH DESCRIPTION
-This function must be the last function to call for a curl session. It is the
-opposite of the
-.I curl_easy_init
-function and must be called with the same
-.I handle
-as input as the curl_easy_init call returned.
-
-This will effectively close all connections libcurl has been used and possibly
-has kept open until now. Don't call this function if you intend to transfer
-more files (libcurl 7.7 or later).
-.SH RETURN VALUE
-None
-.SH "SEE ALSO"
-.BR curl_easy_init "(3), "
-.SH BUGS
-Surely there are some, you tell me!
--- a/docs/curl_easy_init.3
+++ b/docs/curl_easy_init.3
@@ -1,32 +0,0 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_easy_init 3 "5 March 2001" "libcurl 7.7" "libcurl Manual"
-.SH NAME
-curl_easy_init - Start a libcurl session
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "CURL *curl_easy_init( );"
-.ad
-.SH DESCRIPTION
-This function must be the first function to call, and it returns a CURL handle
-that you shall use as input to the other easy-functions. The init calls
-intializes curl and this call MUST have a corresponding call to
-.I curl_easy_cleanup
-when the operation is complete.
-
-On win32 systems, you need to init the winsock stuff manually, libcurl will
-not do that for you. WSAStartup() and WSACleanup() should be used accordingly.
-
-Using libcurl 7.7 and later, you should perform all your sequential file
-transfers using the same curl handle. This enables libcurl to use persistant
-connections where possible.
-.SH RETURN VALUE
-If this function returns NULL, something went wrong and you cannot use the
-other curl functions.
-.SH "SEE ALSO"
-.BR curl_easy_cleanup "(3), "
-.SH BUGS
-Surely there are some, you tell me!
--- a/docs/curl_easy_setopt.3
+++ b/docs/curl_easy_setopt.3
@@ -1,509 +0,0 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_easy_setopt 3 "1 June 2001" "libcurl 7.8" "libcurl Manual"
-.SH NAME
-curl_easy_setopt - Set curl easy-session options
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "CURLcode curl_easy_setopt(CURL *" handle ", CURLoption "option ", ...);"
-.ad
-.SH DESCRIPTION
-curl_easy_setopt() is called to tell libcurl how to behave in a number of
-ways. Most operations in libcurl have default actions, and by using the
-appropriate options you can make them behave differently (as documented).  All
-options are set with the
-.I option
-followed by a parameter. That parameter can be a long, a function pointer or
-an object pointer, all depending on what the option in question expects. Read
-this manual carefully as bad input values may cause libcurl to behave badly!
-You can only set one option in each function call. A typical application uses
-many curl_easy_setopt() calls in the setup phase.
-
-NOTE: strings passed to libcurl as 'char *' arguments, will not be copied by
-the library. Instead you should keep them available until libcurl no longer
-needs them. Failing to do so will cause very odd behaviour or even crashes.
-
-More note: the options set with this function call are valid for the
-forthcoming data transfers that are performed when you invoke
-.I curl_easy_perform .
-The options are not in any way reset between transfers, so if you want
-subsequent transfers with different options, you must change them between the
-transfers.
-
-The
-.I "handle"
-is the return code from the
-.I "curl_easy_init"
-call.
-.SH OPTIONS
-These options are in a bit of random order, but you'll figure it out!
-.TP 0.8i
-.B CURLOPT_FILE
-Data pointer to pass to file write function. Note that if you specify the
-.I CURLOPT_WRITEFUNCTION
-, this is the pointer you'll get as input. If you don't use a callback, you
-must pass a 'FILE *' as libcurl passes it to fwrite() when writing data.
-
-NOTE: If you're using libcurl as a win32 DLL, you MUST use the
-\fICURLOPT_WRITEFUNCTION\fP if you set this option.
-.TP
-.B CURLOPT_WRITEFUNCTION
-Function pointer that should match the following prototype:
-.BI "size_t function( void *ptr, size_t size, size_t nmemb, void *stream);"
-This function gets called by libcurl as soon as there is received data that
-needs to be written down. The size of the data pointed to by \fIptr\fP is
-\fIsize\fP multiplied with \fInmemb\fP.  Return the number of bytes actually
-written or return -1 to signal error to the library (it will cause it to abort
-the transfer with CURLE_WRITE_ERROR).
-
-Set the \fIstream\fP argument with the \fBCURLOPT_FILE\fP option.
-.TP
-.B CURLOPT_INFILE
-Data pointer to pass to the file read function. Note that if you specify the
-\fICURLOPT_READFUNCTION\fP, this is the pointer you'll get as input. If you
-don't specify a read callback, this must be a valid FILE *.
-
-NOTE: If you're using libcurl as a win32 DLL, you MUST use a
-\fICURLOPT_READFUNCTION\fP if you set this option.
-.TP
-.B CURLOPT_READFUNCTION
-Function pointer that should match the following prototype:
-.BI "size_t function( void *ptr, size_t size, size_t nmemb, void *stream);"
-This function gets called by libcurl as soon as it needs to read data in order
-to send it to the peer. The data area pointed at by the pointer \fIptr\fP may
-be filled with at most \fIsize\fP multiplied with \fInmemb\fP number of
-bytes. Your function must return the actual number of bytes that you stored in
-that memory area. Returning -1 will signal an error to the library and cause
-it to abort the current transfer immediately (with a CURLE_READ_ERROR return
-code).
-.TP
-.B CURLOPT_INFILESIZE
-When uploading a file to a remote site, this option should be used to tell
-libcurl what the expected size of the infile is.
-.TP
-.B CURLOPT_URL
-The actual URL to deal with. The parameter should be a char * to a zero
-terminated string. The string must remain present until curl no longer needs
-it, as it doesn't copy the string. NOTE: this option is required to be set
-before curl_easy_perform() is called.
-.TP
-.B CURLOPT_PROXY
-If you need libcurl to use a http proxy to access the outside world, set the
-proxy string with this option. The parameter should be a char * to a zero
-terminated string. To specify port number in this string, append :[port] to
-the end of the host name. The proxy string may be prefixed with
-[protocol]:// since any such prefix will be ignored.
-.TP
-.B CURLOPT_PROXYPORT
-Set this long with this option to set the proxy port to use unless it is
-specified in the proxy string CURLOPT_PROXY.
-.TP
-.B CURLOPT_HTTPPROXYTUNNEL
-Set the parameter to non-zero to get the library to tunnel all non-HTTP
-operations through the given HTTP proxy. Do note that there is a big
-difference to use a proxy and to tunnel through it. If you don't know what
-this means, you probably don't want this tunnel option. (Added in libcurl 7.3)
-.TP
-.B CURLOPT_VERBOSE
-Set the parameter to non-zero to get the library to display a lot of verbose
-information about its operations. Very useful for libcurl and/or protocl
-debugging and understanding.
-.TP
-.B CURLOPT_HEADER
-A non-zero parameter tells the library to include the header in the
-output. This is only relevant for protocols that actually has a header
-preceeding the data (like HTTP).
-.TP
-.B CURLOPT_NOPROGRESS
-A non-zero parameter tells the library to shut of the built-in progress meter
-completely. (NOTE: future versions of the lib is likely to not have any
-built-in progress meter at all).
-.TP
-.B CURLOPT_NOBODY
-A non-zero parameter tells the library to not include the body-part in the
-output. This is only relevant for protocols that have a separate header and
-body part.
-.TP
-.B CURLOPT_FAILONERROR
-A non-zero parameter tells the library to fail silently if the HTTP code
-returned is equal or larger than 300. The default action would be to return
-the page normally, ignoring that code.
-.TP
-.B CURLOPT_UPLOAD
-A non-zero parameter tells the library to prepare for an upload. The
-CURLOPT_INFILE and CURLOPT_INFILESIZE are also interesting for uploads.
-.TP
-.B CURLOPT_POST
-A non-zero parameter tells the library to do a regular HTTP post. This is a
-normal application/x-www-form-urlencoded kind, which is the most commonly used
-one by HTML forms. See the CURLOPT_POSTFIELDS option for how to specify the
-data to post and CURLOPT_POSTFIELDSIZE in how to set the data size.
-.TP
-.B CURLOPT_FTPLISTONLY
-A non-zero parameter tells the library to just list the names of an ftp
-directory, instead of doing a full directory listin that would include file
-sizes, dates etc.
-.TP
-.B CURLOPT_FTPAPPEND
-A non-zero parameter tells the library to append to the remote file instead of
-overwrite it. This is only useful when uploading to a ftp site.
-.TP
-.B CURLOPT_NETRC
-A non-zero parameter tells the library to scan your
-.I ~/.netrc
-file to find user name and password for the remote site you are about to
-access. Do note that curl does not verify that the file has the correct
-properties set (as the standard unix ftp client does), and that only machine
-name, user name and password is taken into account (init macros and similar
-things aren't supported).
-.TP
-.B CURLOPT_FOLLOWLOCATION
-A non-zero parameter tells the library to follow any Location: header that the
-server sends as part of a HTTP header. NOTE that this means that the library
-will resend the same request on the new location and follow new Location:
-headers all the way until no more such headers are returned.
-.TP
-.B CURLOPT_TRANSFERTEXT
-A non-zero parameter tells the library to use ASCII mode for ftp transfers,
-instead of the default binary transfer. For LDAP transfers it gets the data in
-plain text instead of HTML and for win32 systems it does not set the stdout to
-binary mode. This option can be useable when transfering text data between
-system with different views on certain characters, such as newlines or
-similar.
-.TP
-.B CURLOPT_PUT
-A non-zero parameter tells the library to use HTTP PUT a file. The file to put
-must be set with CURLOPT_INFILE and CURLOPT_INFILESIZE.
-.TP
-.B CURLOPT_USERPWD
-Pass a char * as parameter, which should be [username]:[password] to use for
-the connection. If the password is left out, you will be prompted for it.
-.TP
-.B CURLOPT_PROXYUSERPWD
-Pass a char * as parameter, which should be [username]:[password] to use for
-the connection to the HTTP proxy. If the password is left out, you will be
-prompted for it.
-.TP
-.B CURLOPT_RANGE
-Pass a char * as parameter, which should contain the specified range you
-want. It should be in the format "X-Y", where X or Y may be left out. HTTP
-transfers also support several intervals, separated with commas as in
-.I "X-Y,N-M"
-. Using this kind of multiple intervals will cause the HTTP server to send the
-response document in pieces.
-.TP
-.B CURLOPT_ERRORBUFFER
-Pass a char * to a buffer that the libcurl may store human readable error
-messages in. This may be more helpful than just the return code from the
-library. The buffer must be at least CURL_ERROR_SIZE big.
-.TP
-.B CURLOPT_TIMEOUT
-Pass a long as parameter containing the maximum time in seconds that you allow
-the libcurl transfer operation to take. Do note that normally, name lookups
-maky take a considerable time and that limiting the operation to less than a
-few minutes risk aborting perfectly normal operations. This option will cause
-curl to use the SIGALRM to enable timeouting system calls.
-.TP
-.B CURLOPT_POSTFIELDS
-Pass a char * as parameter, which should be the full data to post in a HTTP
-post operation. See also the CURLOPT_POST.
-.TP
-.B CURLOPT_POSTFIELDSIZE
-If you want to post data to the server without letting libcurl do a strlen()
-to measure the data size, this option must be used. Also, when this option is
-used, you can post fully binary data which otherwise is likely to fail. If
-this size is set to zero, the library will use strlen() to get the data
-size. (Added in libcurl 7.2)
-.TP
-.B CURLOPT_REFERER
-Pass a pointer to a zero terminated string as parameter. It will be used to
-set the referer: header in the http request sent to the remote server. This
-can be used to fool servers or scripts.
-.TP
-.B CURLOPT_USERAGENT
-Pass a pointer to a zero terminated string as parameter. It will be used to
-set the user-agent: header in the http request sent to the remote server. This
-can be used to fool servers or scripts.
-.TP
-.B CURLOPT_FTPPORT
-Pass a pointer to a zero terminated string as parameter. It will be used to
-get the IP address to use for the ftp PORT instruction. The PORT instruction
-tells the remote server to connect to our specified IP address. The string may
-be a plain IP address, a host name, an network interface name (under unix) or
-just a '-' letter to let the library use your systems default IP address.
-.TP
-.B CURLOPT_LOW_SPEED_LIMIT
-Pass a long as parameter. It contains the transfer speed in bytes per second
-that the transfer should be below during CURLOPT_LOW_SPEED_TIME seconds for
-the library to consider it too slow and abort.
-.TP
-.B CURLOPT_LOW_SPEED_TIME
-Pass a long as parameter. It contains the time in seconds that the transfer
-should be below the CURLOPT_LOW_SPEED_LIMIT for the library to consider it too
-slow and abort.
-.TP
-.B CURLOPT_RESUME_FROM
-Pass a long as parameter. It contains the offset in number of bytes that you
-want the transfer to start from.
-.TP
-.B CURLOPT_COOKIE
-Pass a pointer to a zero terminated string as parameter. It will be used to
-set a cookie in the http request. The format of the string should be
-[NAME]=[CONTENTS]; Where NAME is the cookie name.
-.TP
-.B CURLOPT_HTTPHEADER
-Pass a pointer to a linked list of HTTP headers to pass to the server in your
-HTTP request. The linked list should be a fully valid list of 'struct
-curl_slist' structs properly filled in. Use
-.I curl_slist_append(3)
-to create the list and
-.I curl_slist_free_all(3)
-to clean up an entire list. If you add a header that is otherwise generated
-and used by libcurl internally, your added one will be used instead. If you
-add a header with no contents as in 'Accept:', the internally used header will
-just get disabled. Thus, using this option you can add new headers, replace
-internal headers and remove internal headers.
-.TP
-.B CURLOPT_HTTPPOST
-Tells libcurl you want a multipart/formdata HTTP POST to be made and you
-instruct what data to pass on to the server.  Pass a pointer to a linked list
-of HTTP post structs as parameter.  The linked list should be a fully valid
-list of 'struct HttpPost' structs properly filled in. The best and most
-elegant way to do this, is to use
-.I curl_formparse(3)
-as documented. The data in this list must remained intact until you close this
-curl handle again with curl_easy_cleanup().
-.TP
-.B CURLOPT_SSLCERT
-Pass a pointer to a zero terminated string as parameter. The string should be
-the file name of your certficicate in PEM format.
-.TP
-.B CURLOPT_SSLCERTPASSWD
-Pass a pointer to a zero terminated string as parameter. It will be used as
-the password required to use the CURLOPT_SSLCERT certificate. If the password
-is not supplied, you will be prompted for it.
-.TP
-.B CURLOPT_CRLF
-Convert unix newlines to CRLF newlines on FTP uploads.
-.TP
-.B CURLOPT_QUOTE
-Pass a pointer to a linked list of FTP commands to pass to the server prior to
-your ftp request. The linked list should be a fully valid list of 'struct
-curl_slist' structs properly filled in. Use
-.I curl_slist_append(3)
-to append strings (commands) to the list, and clear the entire list afterwards
-with
-.I curl_slist_free_all(3)
-.TP
-.B CURLOPT_POSTQUOTE
-Pass a pointer to a linked list of FTP commands to pass to the server after
-your ftp transfer request. The linked list should be a fully valid list of
-struct curl_slist structs properly filled in as described for
-.I "CURLOPT_QUOTE"
-.TP
-.B CURLOPT_WRITEHEADER
-Pass a pointer to be used to write the header part of the received data to. If
-you don't use a callback to take care of the writing, this must be a FILE
-*. The headers are guaranteed to be written one-by-one and only complete lines
-are written. Parsing headers should be easy enough using this. See also the
-\fICURLOPT_HEADERFUNCTION\fP option.
-.TP
-.B CURLOPT_HEADERFUNCTION
-Function pointer that should match the following prototype:
-.BI "size_t function( void *ptr, size_t size, size_t nmemb, void *stream);"
-This function gets called by libcurl as soon as there is received header data
-that needs to be written down. The function will be called once for each
-header with a complete header line in each invoke. The size of the data
-pointed to by
-.I ptr 
-is
-.I size
-multiplied with
-.I nmemb.
-The pointer named
-.I stream
-will be the one you passed to libcurl with the
-.I CURLOPT_WRITEHEADER
-option.
-Return the number of bytes actually written or return -1 to signal error to
-the library (it will cause it to abort the transfer with a
-.I CURLE_WRITE_ERROR
-return code). (Added in libcurl 7.7.2)
-.TP
-.B CURLOPT_COOKIEFILE
-Pass a pointer to a zero terminated string as parameter. It should contain the
-name of your file holding cookie data. The cookie data may be in Netscape /
-Mozilla cookie data format or just regular HTTP-style headers dumped to a
-file.
-.TP
-.B CURLOPT_SSLVERSION
-Pass a long as parameter. Set what version of SSL to attempt to use, 2 or
-3. By default, the SSL library will try to solve this by itself although some
-servers make this difficult why you at times will have to use this option.
-.TP
-.B CURLOPT_TIMECONDITION
-Pass a long as parameter. This defines how the CURLOPT_TIMEVALUE time value is
-treated. You can set this parameter to TIMECOND_IFMODSINCE or
-TIMECOND_IFUNMODSINCE. This is aa HTTP-only feature. (TBD)
-.TP
-.B CURLOPT_TIMEVALUE
-Pass a long as parameter. This should be the time in seconds since 1 jan 1970,
-and the time will be used as specified in CURLOPT_TIMECONDITION or if that
-isn't used, it will be TIMECOND_IFMODSINCE by default.
-.TP
-.B CURLOPT_CUSTOMREQUEST
-Pass a pointer to a zero terminated string as parameter. It will be user
-instead of GET or HEAD when doing the HTTP request. This is useful for doing
-DELETE or other more obscure HTTP requests. Don't do this at will, make sure
-your server supports the command first.
-.TP
-.B CURLOPT_STDERR
-Pass a FILE * as parameter. This is the stream to use instead of stderr
-internally when reporting errors.
-.TP
-.B CURLOPT_INTERFACE
-Pass a char * as parameter. This set the interface name to use as outgoing
-network interface. The name can be an interface name, an IP address or a host
-name. (Added in libcurl 7.3)
-.TP
-.B CURLOPT_KRB4LEVEL
-Pass a char * as parameter. Set the krb4 security level, this also enables
-krb4 awareness.  This is a string, 'clear', 'safe', 'confidential' or
-\&'private'.  If the string is set but doesn't match one of these, 'private'
-will be used. Set the string to NULL to disable kerberos4. The kerberos
-support only works for FTP. (Added in libcurl 7.3)
-.TP
-.B CURLOPT_WRITEINFO
-(NOT PRESENT IN 7.4 or later!)
-Pass a pointer to a zero terminated string as parameter. It will be used to
-report information after a successful request. This string may contain
-variables that will be substituted by their contents when output. Described
-elsewhere.
-.TP
-.B CURLOPT_PROGRESSFUNCTION
-Function pointer that should match the
-.BI curl_progress_callback
-prototype found in
-.I <curl/curl.h>
-This function gets called by libcurl instead of its internal
-equivalent. Unknown/unused argument values will be set to zero (like if you
-only download data, the upload size will remain 0). Returning a non-zero value
-from this callback will cause libcurl to abort the transfer and return
-CURLE_ABORTED_BY_CALLBACK.
-.TP
-.B CURLOPT_PROGRESSDATA
-Pass a pointer that will be untouched by libcurl and passed as the first
-argument in the progress callback set with
-.I CURLOPT_PROGRESSFUNCTION
- .
-.TP
-.B CURLOPT_SSL_VERIFYPEER
-Pass a long that is set to a non-zero value to make curl verify the peer's
-certificate. The certificate to verify against must be specified with the
-CURLOPT_CAINFO option. (Added in 7.4.2)
-.TP
-.B CURLOPT_CAINFO
-Pass a char * to a zero terminated file naming holding the certificate to
-verify the peer with. This only makes sense when used in combination with the
-CURLOPT_SSL_VERIFYPEER option. (Added in 7.4.2)
-.TP
-.B CURLOPT_PASSWDFUNCTION
-Pass a pointer to a curl_passwd_callback function that will then be called
-instead of the internal one if libcurl requests a password. The function must
-match this prototype:
-.BI "int my_getpass(void *client, char *prompt, char* buffer, int buflen );"
-If set to NULL, it equals to making the function always fail. If the function
-returns a non-zero value, it will abort the operation and an error
-(CURLE_BAD_PASSWORD_ENTERED) will be returned.
-.I client
-is a generic pointer, see CURLOPT_PASSWDDATA.
-.I prompt
-is a zero-terminated string that is text that prefixes the input request.
-.I buffer
-is a pointer to data where the entered password should be stored and
-.I buflen
-is the maximum number of bytes that may be written in the buffer.
-(Added in 7.4.2)
-.TP
-.B CURLOPT_PASSWDDATA
-Pass a void * to whatever data you want. The passed pointer will be the first
-argument sent to the specifed CURLOPT_PASSWDFUNCTION function. (Added in
-7.4.2)
-.TP
-.B CURLOPT_FILETIME
-Pass a long. If it is a non-zero value, libcurl will attempt to get the
-modification date of the remote document in this operation. This requires that
-the remote server sends the time or replies to a time querying command. The
-curl_easy_getinfo() function with the CURLINFO_FILETIME argument can be used
-after a transfer to extract the received time (if any). (Added in 7.5)
-.TP
-.B CURLOPT_MAXREDIRS
-Pass a long. The set number will be the redirection limit. If that many
-redirections have been followed, the next redirect will cause an error. This
-option only makes sense if the CURLOPT_FOLLOWLOCATION is used at the same
-time. (Added in 7.5)
-.TP
-.B CURLOPT_MAXCONNECTS
-Pass a long. The set number will be the persistant connection cache size. The
-set amount will be the maximum amount of simultaneous connections that libcurl
-may cache between file transfers. Default is 5, and there isn't much point in
-changing this value unless you are perfectly aware of how this work and
-changes libcurl's behaviour. Note: if you have already performed transfers
-with this curl handle, setting a smaller MAXCONNECTS than before may cause
-open connections to unnecessarily get closed. (Added in 7.7)
-.TP
-.B CURLOPT_CLOSEPOLICY
-Pass a long. This option sets what policy libcurl should use when the
-connection cache is filled and one of the open connections has to be closed to
-make room for a new connection. This must be one of the CURLCLOSEPOLICY_*
-defines. Use CURLCLOSEPOLICY_LEAST_RECENTLY_USED to make libcurl close the
-connection that was least recently used, that connection is also least likely
-to be capable of re-use. Use CURLCLOSEPOLICY_OLDEST to make libcurl close the
-oldest connection, the one that was created first among the ones in the
-connection cache. The other close policies are not support yet. (Added in 7.7)
-.TP
-.B CURLOPT_FRESH_CONNECT
-Pass a long. Set to non-zero to make the next transfer use a new connection by
-force. If the connection cache is full before this connection, one of the
-existinf connections will be closed as according to the set policy. This
-option should be used with caution and only if you understand what it
-does. Set to 0 to have libcurl attempt re-use of an existing connection.
-(Added in 7.7)
-.TP
-.B CURLOPT_FORBID_REUSE
-Pass a long. Set to non-zero to make the next transfer explicitly close the
-connection when done. Normally, libcurl keep all connections alive when done
-with one transfer in case there comes a succeeding one that can re-use them.
-This option should be used with caution and only if you understand what it
-does. Set to 0 to have libcurl keep the connection open for possibly later
-re-use. (Added in 7.7)
-.TP
-.B CURLOPT_RANDOM_FILE
-Pass a char * to a zero terminated file name. The file will be used to read
-from to seed the random engine for SSL. The more random the specified file is,
-the more secure will the SSL connection become.
-.TP
-.B CURLOPT_EGDSOCKET
-Pass a char * to the zero terminated path name to the Entropy Gathering Daemon
-socket. It will be used to seed the random engine for SSL.
-.TP
-.B CURLOPT_CONNECTTIMEOUT
-Pass a long. It should contain the maximum time in seconds that you allow the
-connection to the server to take.  This only limits the connection phase, once
-it has connected, this option is of no more use. Set to zero to disable
-connection timeout (it will then only timeout on the system's internal
-timeouts). See also the
-.I CURLOPT_TIMEOUT
-option.
-.PP
-.SH RETURN VALUE
-0 means the option was set properly, non-zero means an error as
-.I <curl/curl.h>
-defines
-.SH "SEE ALSO"
-.BR curl_easy_init "(3), " curl_easy_cleanup "(3), "
-.SH BUGS
-Surely there are some, you tell me!
--- a/docs/curl_formparse.3
+++ b/docs/curl_formparse.3
@@ -1,85 +0,0 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_formparse 3 "21 May 2001" "libcurl 7.7.4" "libcurl Manual"
-.SH NAME
-curl_formparse - add a section to a multipart/formdata HTTP POST
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "CURLcode curl_formparse(char * " string, " struct HttpPost ** " firstitem,
-.BI "struct HttpPost ** " lastitem ");"
-.ad
-.SH DESCRIPTION
-curl_formparse() is used to append sections when building a multipart/formdata
-HTTP POST (sometimes refered to as rfc1867-style posts). Append one section at
-a time until you've added all the sections you want included and then you pass
-the \fIfirstitem\fP pointer as parameter to \fBCURLOPT_HTTPPOST\fP.
-\fIlastitem\fP is set after each call and on repeated invokes it should be
-left as set to allow repeated invokes to find the end of the list in a faster
-way.  \fIstring\fP must be a zero terminated string abiding to the syntax
-described in a section below
-
-The pointers \fI*firstitem\fP and \fI*lastitem\fP should both be pointing to
-NULL in the first call to this function. All list-data will be allocated by
-the function itself. You must call \fIcurl_formfree\fP after the form post has
-been done to free the resources again.
-
-This function will copy all input data and keep its own version of it
-allocated until you call \fIcurl_formfree\fP. When you've passed the pointer
-to \fIcurl_easy_setopt\fP, you must not free the list until after you've
-called \fIcurl_easy_cleanup\fP for the curl handle.
-
-See example below.
-.SH "FORM PARSE STRINGS"
-The
-.I string 
-parameter must be using one of the following patterns. Note that the []
-letters should not be included in the real-life string.
-.TP 0.8i
-.B [name]=[contents]
-Add a form field named 'name' with the contents 'contents'. This is the
-typcial contents of the HTML tag <input type=text>.
-.TP
-.B [name]=@[filename]
-Add a form field named 'name' with the contents as read from the local file
-named 'filename'. This is the typcial contents of the HTML tag <input
-type=file>.
-.TP
-.B [name]=@[filename1,filename2,...]
-Add a form field named 'name' with the contents as read from the local files
-named 'filename1' and 'filename2'. This is identical to the upper, except that
-you get the contents of several files in one section.
-.TP
-.B [name]=@[filename];[type=<content-type>]
-Whenever you specify a file to read from, you can optionally specify the
-content-type as well. The content-type is passed to the server together with
-the contents of the file. curl_formparse() will guess content-type for a
-number of well-known extensions and otherwise it will set it to binary. You
-can override the internal decision by using this option.
-.TP
-.B [name]=@[filename1,filename2,...];[type=<content-type>]
-When you specify several files to read the contents from, you can set the
-content-type for all of them in the same way as with a single file.
-.PP
-.SH RETURN VALUE
-Returns non-zero if an error occurs.
-.SH EXAMPLE
-
- HttpPost* post = NULL;
- HttpPost* last = NULL;
-
- /* Add an image section */
- curl_formparse("picture=@my-face.jpg", &post, &last);
- /* Add a normal text section */
- curl_formparse("name=FooBar", &post, &last);
- /* Set the form info */
- curl_easy_setopt(curl, CURLOPT_HTTPPOST, post);
-
-.SH "SEE ALSO"
-.BR curl_easy_setopt "(3), "
-.BR curl_formfree "(3)
-.SH BUGS
-Surely there are some, you tell me!
-
--- a/docs/examples/.cvsignore
+++ b/docs/examples/.cvsignore
@@ -0,0 +1,2 @@
+Makefile
+Makefile.in
--- a/docs/examples/Makefile.am
+++ b/docs/examples/Makefile.am
@@ -4,9 +4,12 @@

 AUTOMAKE_OPTIONS = foreign no-dependencies

-EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit.c \
-	     win32sockets.c persistant.c ftpget.c Makefile.example \
-	     multithread.c getinmemory.c
+EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit2.c		\
+	     persistant.c ftpget.c Makefile.example			\
+	     multithread.c getinmemory.c ftpupload.c httpput.c		\
+	     simplessl.c ftpgetresp.c http-post.c post-callback.c	\
+	     multi-app.c multi-double.c multi-single.c multi-post.c	\
+	     fopen.c simplepost.c

 all:
 	@echo "done"
--- a/docs/examples/Makefile.example
+++ b/docs/examples/Makefile.example
@@ -35,7 +35,7 @@ LIBS = -lcurl -lsocket -lnsl -lssl -lcrypto -dl

 # Link the target with all objects and libraries
 $(TARGET) : $(OBJS)
-	$(CC) $(LDFLAGS) $(LIBS) -o $(TARGET) $(OBJS)
+	$(CC)  -o $(TARGET) $(OBJS) $(LDFLAGS) $(LIBS)

 # Compile the source files into object files
 ftpget.o : ftpget.c
--- a/docs/examples/README
+++ b/docs/examples/README
@@ -1,7 +1,7 @@
 EXAMPLES

-This directory is for tiny libcurl programming examples. They are meant to
-show some simple steps on how you can build your own application to take full
+This directory is for libcurl programming examples. They are meant to show
+some simple steps on how you can build your own application to take full
 advantage of libcurl.

 If you end up with other small but still useful example sources, please mail
@@ -10,9 +10,16 @@ them for submission in future packages and on the web site.
 The Makefile.example is an example makefile that could be used to build these
 examples. Just edit the file according to your system and requirements first.

-Try the php/examples/ directory for PHP programming snippets!
+Most examples should build fine using a command line like this:

-  *PLEASE* do not use the curl.haxx.se site as a test target for your libcurl
-  applications/experiments. Even if the examples in this directory use that
-  site as an example URL at some places, it doesn't mean that the URLs work or
-  that we expect you to actually torture our web site with your tests! Thanks.
+  $ `curl-config --cc --cflags --libs` -o example example.c
+
+Some compilers don't like having the arguments in this order but instead
+want you do reorganize them like:
+
+  $ `curl-config --cc` -o example example.c `curl-config --cflags --libs`
+
+*PLEASE* do not use the curl.haxx.se site as a test target for your libcurl
+applications/experiments. Even if the examples in this directory use that site
+as an example URL at some places, it doesn't mean that the URLs work or that
+we expect you to actually torture our web site with your tests! Thanks.
--- a/docs/examples/curlgtk.c
+++ b/docs/examples/curlgtk.c
@@ -26,7 +26,11 @@ size_t my_read_func(void *ptr, size_t size, size_t nmemb, FILE *stream)
  return fread(ptr, size, nmemb, stream);
 }

-int my_progress_func(GtkWidget *Bar, int t, int d)
+int my_progress_func(GtkWidget *Bar,
+                     double t, /* dltotal */
+                     double d, /* dlnow */
+                     double ultotal,
+                     double ulnow)
 {
 /*  printf("%d / %d (%g %%)\n", d, t, d*100.0/t);*/
  gdk_threads_enter();
@@ -50,6 +54,7 @@ void *curl_thread(void *ptr)
    curl_easy_setopt(curl, CURLOPT_URL, url);
    curl_easy_setopt(curl, CURLOPT_FILE, outfile);
    curl_easy_setopt(curl, CURLOPT_READFUNCTION, my_read_func);
+    curl_easy_setopt(curl, CURLOPT_NOPROGRESS, FALSE);
    curl_easy_setopt(curl, CURLOPT_PROGRESSFUNCTION, my_progress_func);
    curl_easy_setopt(curl, CURLOPT_PROGRESSDATA, Bar);
    
--- a/docs/examples/fopen.c
+++ b/docs/examples/fopen.c
@@ -0,0 +1,222 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This example source code introduces an fopen()/fread()/fclose() emulation
+ * for URL reads. Using an approach similar to this, you could replace your
+ * program's fopen() with this url_fopen() and fread() with url_fread() and
+ * it should be possible to read remote streams instead of (only) local files.
+ *
+ * See the main() function at the bottom that shows a tiny app in action.
+ *
+ * This source code is a proof of concept. It will need further attention to
+ * become production-use useful and solid.
+ *
+ * This example requires libcurl 7.9.7 or later.
+ */
+#include <stdio.h>
+#include <string.h>
+#include <sys/time.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+struct data {
+  int type;
+  union {
+    CURL *curl;
+    FILE *file;
+  } handle;
+
+  /* TODO: We should perhaps document the biggest possible buffer chunk we can
+     get from libcurl in one single callback... */
+  char buffer[CURL_MAX_WRITE_SIZE];
+
+  char *readptr; /* read from here */
+  int bytes;     /* bytes available from read pointer */
+
+  CURLMcode m;   /* stored from a previous url_fread() */
+};
+
+typedef struct data URL_FILE;
+
+/* we use a global one for convenience */
+CURLM *multi_handle;
+
+static
+size_t write_callback(char *buffer,
+                      size_t size,
+                      size_t nitems,
+                      void *userp)
+{
+  URL_FILE *url = (URL_FILE *)userp;
+  size *= nitems;
+
+  memcpy(url->readptr, buffer, size);
+  url->readptr += size;
+  url->bytes += size;
+
+  return size;
+}
+
+URL_FILE *url_fopen(char *url, char *operation)
+{
+  /* this code could check for URLs or types in the 'url' and
+     basicly use the real fopen() for standard files */
+
+  URL_FILE *file;
+  int still_running;
+
+  file = (URL_FILE *)malloc(sizeof(URL_FILE));
+  if(!file)
+    return NULL;
+
+  memset(file, 0, sizeof(URL_FILE));
+
+  file->type = 1; /* marked as URL, use 0 for plain file */
+  file->handle.curl = curl_easy_init();
+
+  curl_easy_setopt(file->handle.curl, CURLOPT_URL, url);
+  curl_easy_setopt(file->handle.curl, CURLOPT_FILE, file);
+  curl_easy_setopt(file->handle.curl, CURLOPT_VERBOSE, FALSE);
+  curl_easy_setopt(file->handle.curl, CURLOPT_WRITEFUNCTION, write_callback);
+
+  if(!multi_handle)
+    multi_handle = curl_multi_init();
+
+  curl_multi_add_handle(multi_handle, file->handle.curl);
+
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  /* if still_running would be 0 now, we should return NULL */
+
+  return file;
+}
+
+void url_fclose(URL_FILE *file)
+{
+  /* make sure the easy handle is not in the multi handle anymore */
+  curl_multi_remove_handle(multi_handle, file->handle.curl);
+
+  /* cleanup */
+  curl_easy_cleanup(file->handle.curl);
+}
+
+
+
+size_t url_fread(void *ptr, size_t size, size_t nmemb, URL_FILE *file)
+{
+  fd_set fdread;
+  fd_set fdwrite;
+  fd_set fdexcep;
+  int maxfd;
+  struct timeval timeout;
+  int rc;
+  int still_running = 0;
+
+  if(!file->bytes) { /* no data available at this point */
+
+    file->readptr = file->buffer; /* reset read pointer */
+
+    if(CURLM_CALL_MULTI_PERFORM == file->m) {
+      while(CURLM_CALL_MULTI_PERFORM ==
+            curl_multi_perform(multi_handle, &still_running)) {
+        if(file->bytes) {
+          printf("(fread) WOAH! THis happened!\n");
+          break;        
+        }
+      }
+      if(!still_running) {
+        printf("NO MORE RUNNING AROUND!\n");
+        return 0;
+      }
+    }
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+  
+    /* set a suitable timeout to fail on */
+    timeout.tv_sec = 500; /* 5 minutes */
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+      break;
+    default:
+      /* timeout or readable/writable sockets */
+      do {
+        file->m = curl_multi_perform(multi_handle, &still_running);
+
+        if(file->bytes)
+          /* we have received data, return that now */
+          break;
+
+      } while(CURLM_CALL_MULTI_PERFORM == file->m);
+
+
+      if(!still_running)
+        printf("NO MORE RUNNING AROUND!\n");
+
+      break;
+    }
+  }
+  else
+    printf("(fread) Skip network read\n");
+
+  if(file->bytes) {
+    /* data already available, return that */
+    int want = size * nmemb;
+
+    if(file->bytes < want)
+      want = file->bytes;
+
+    memcpy(ptr, file->readptr, want);
+    file->readptr += want;
+    file->bytes -= want;
+
+    printf("(fread) return %d bytes\n", want);
+
+    return want;
+  }
+  return 0; /* no data available to return */
+}
+
+
+int main(int argc, char *argv[])
+{
+  URL_FILE *handle;
+  int nread;
+  char buffer[256];
+
+  handle = url_fopen("http://www.haxx.se", "r");
+
+  if(!handle) {
+    printf("couldn't url_fopen()\n");
+  }
+
+  do {
+    nread = url_fread(buffer, sizeof(buffer), 1, handle);
+
+    printf("We got: %d bytes\n", nread);
+  } while(nread);
+
+  url_fclose(handle);
+
+  return 0;
+}
--- a/docs/examples/ftpget.c
+++ b/docs/examples/ftpget.c
@@ -14,31 +14,70 @@
 #include <curl/types.h>
 #include <curl/easy.h>

-/* to make this work under windows, use the win32-functions from the
-   win32socket.c file as well */
+/*
+ * This is an example showing how to get a single file from an FTP server.
+ * It delays the actual destination file creation until the first write
+ * callback so that it won't create an empty file in case the remote file
+ * doesn't exist or something else fails.
+ */

-int main(int argc, char **argv)
+struct FtpFile {
+  char *filename;
+  FILE *stream;
+};
+
+int my_fwrite(void *buffer, size_t size, size_t nmemb, void *stream)
+{
+  struct FtpFile *out=(struct FtpFile *)stream;
+  if(out && !out->stream) {
+    /* open file for writing */
+    out->stream=fopen(out->filename, "wb");
+    if(!out->stream)
+      return -1; /* failure, can't open file to write */
+  }
+  return fwrite(buffer, size, nmemb, out->stream);
+}
+
+
+int main(void)
 {
  CURL *curl;
  CURLcode res;
-  FILE *ftpfile;
-  
-  /* local file name to store the file as */
-  ftpfile = fopen("curl.tar.gz", "wb"); /* b is binary for win */
+  struct FtpFile ftpfile={
+    "curl.tar.gz", /* name to store the file as if succesful */
+    NULL
+  };

+  curl_global_init(CURL_GLOBAL_DEFAULT);
+  
  curl = curl_easy_init();
  if(curl) {
-    /* Get curl 7.7 from sunet.se's FTP site: */
+    /* Get curl 7.9.2 from sunet.se's FTP site: */
    curl_easy_setopt(curl, CURLOPT_URL,
-                     "ftp://ftp.sunet.se/pub/www/utilities/curl/curl-7.7.tar.gz");
-    curl_easy_setopt(curl, CURLOPT_FILE, ftpfile);
+                     "ftp://ftp.sunet.se/pub/www/utilities/curl/curl-7.9.2.tar.gz");
+    /* Define our callback to get called when there's data to be written */
+    curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, my_fwrite);
+    /* Set a pointer to our struct to pass to the callback */
+    curl_easy_setopt(curl, CURLOPT_FILE, &ftpfile);
+
+    /* Switch on full protocol/debug output */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, TRUE);
+
    res = curl_easy_perform(curl);

    /* always cleanup */
    curl_easy_cleanup(curl);
+
+    if(CURLE_OK != res) {
+      /* we failed */
+      fprintf(stderr, "curl told us %d\n", res);
+    }
  }

-  fclose(ftpfile); /* close the local file */
+  if(ftpfile.stream)
+    fclose(ftpfile.stream); /* close the local file */
+
+  curl_global_cleanup();

  return 0;
 }
--- a/docs/examples/ftpgetresp.c
+++ b/docs/examples/ftpgetresp.c
@@ -0,0 +1,61 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+/*
+ * Similar to ftpget.c but this also stores the received response-lines
+ * in a separate file using our own callback!
+ *
+ * This functionality was introduced in libcurl 7.9.3.
+ */
+
+size_t
+write_response(void *ptr, size_t size, size_t nmemb, void *data)
+{
+  FILE *writehere = (FILE *)data;
+  return fwrite(ptr, size, nmemb, writehere);
+}
+
+int main(int argc, char **argv)
+{
+  CURL *curl;
+  CURLcode res;
+  FILE *ftpfile;
+  FILE *respfile;
+  
+  /* local file name to store the file as */
+  ftpfile = fopen("ftp-list", "wb"); /* b is binary, needed on win32 */
+
+  /* local file name to store the FTP server's response lines in */
+  respfile = fopen("ftp-responses", "wb"); /* b is binary, needed on win32 */
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* Get a file listing from sunet */
+    curl_easy_setopt(curl, CURLOPT_URL, "ftp://ftp.sunet.se/");
+    curl_easy_setopt(curl, CURLOPT_FILE, ftpfile);
+    curl_easy_setopt(curl, CURLOPT_HEADERFUNCTION, write_response);
+    curl_easy_setopt(curl, CURLOPT_WRITEHEADER, respfile);
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+
+  fclose(ftpfile); /* close the local file */
+  fclose(respfile); /* close the response file */
+
+  return 0;
+}
--- a/docs/examples/ftpupload.c
+++ b/docs/examples/ftpupload.c
@@ -0,0 +1,88 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+
+#include <curl/curl.h>
+
+/*
+ * This example shows an FTP upload, with a rename of the file just after
+ * a successful upload.
+ *
+ * Example based on source code provided by Erick Nuwendam. Thanks!
+ */
+
+#define LOCAL_FILE      "/tmp/uploadthis.txt"
+#define UPLOAD_FILE_AS  "while-uploading.txt"
+#define REMOTE_URL      "ftp://localhost/"  UPLOAD_FILE_AS
+#define RENAME_FILE_TO  "renamed-and-fine.txt"
+
+int main(int argc, char **argv)
+{
+  CURL *curl;
+  CURLcode res;
+  FILE *ftpfile;
+  FILE * hd_src ;
+  int hd ;
+  struct stat file_info;
+
+  struct curl_slist *headerlist=NULL;
+  char buf_1 [] = "RNFR " UPLOAD_FILE_AS;
+  char buf_2 [] = "RNTO " RENAME_FILE_TO;
+
+  /* get the file size of the local file */
+  hd = open(LOCAL_FILE, O_RDONLY) ;
+  fstat(hd, &file_info);
+  close(hd) ;
+
+  /* get a FILE * of the same file, could also be made with
+     fdopen() from the previous descriptor, but hey this is just 
+     an example! */
+  hd_src = fopen(LOCAL_FILE, "rb");
+
+  /* In windows, this will init the winsock stuff */
+  curl_global_init(CURL_GLOBAL_ALL);
+
+  /* get a curl handle */
+  curl = curl_easy_init();
+  if(curl) {
+    /* build a list of commands to pass to libcurl */
+    headerlist = curl_slist_append(headerlist, buf_1);
+    headerlist = curl_slist_append(headerlist, buf_2);
+
+    /* enable uploading */
+    curl_easy_setopt(curl, CURLOPT_UPLOAD, TRUE) ;
+
+    /* specify target */
+    curl_easy_setopt(curl,CURLOPT_URL, REMOTE_URL);
+
+    /* pass in that last of FTP commands to run after the transfer */
+    curl_easy_setopt(curl, CURLOPT_POSTQUOTE, headerlist);
+
+    /* now specify which file to upload */
+    curl_easy_setopt(curl, CURLOPT_INFILE, hd_src);
+
+    /* and give the size of the upload (optional) */
+    curl_easy_setopt(curl, CURLOPT_INFILESIZE, file_info.st_size);
+
+    /* Now run off and do what you've been told! */
+    res = curl_easy_perform(curl);
+
+    /* clean up the FTP commands list */
+    curl_slist_free_all (headerlist);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  fclose(hd_src); /* close the local file */
+
+  curl_global_cleanup();
+  return 0;
+}
--- a/docs/examples/http-post.c
+++ b/docs/examples/http-post.c
@@ -0,0 +1,35 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* First set the URL that is about to receive our POST. This URL can
+       just as well be a https:// URL if that is what should receive the
+       data. */
+    curl_easy_setopt(curl, CURLOPT_URL, "http://postit.example.com/moo.cgi");
+    /* Now specify the POST data */
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDS, "name=daniel&project=curl");
+
+    /* Perform the request, res will get the return code */
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}
--- a/docs/examples/httpput.c
+++ b/docs/examples/httpput.c
@@ -0,0 +1,100 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#include <curl/curl.h>
+
+/*
+ * This example shows a HTTP PUT operation. PUTs a file given as a command
+ * line argument to the URL also given on the command line.
+ *
+ * This example also uses its own read callback.
+ */
+
+size_t read_callback(void *ptr, size_t size, size_t nmemb, void *stream)
+{
+  size_t retcode;
+
+  /* in real-world cases, this would probably get this data differently
+     as this fread() stuff is exactly what the library already would do
+     by default internally */
+  retcode = fread(ptr, size, nmemb, stream);
+
+  fprintf(stderr, "*** We read %d bytes from file\n", retcode);
+
+  return retcode;
+}
+
+int main(int argc, char **argv)
+{
+  CURL *curl;
+  CURLcode res;
+  FILE *ftpfile;
+  FILE * hd_src ;
+  int hd ;
+  struct stat file_info;
+
+  char *file;
+  char *url;
+
+  if(argc < 3)
+    return 1;
+ 
+  file= argv[1];
+  url = argv[2];
+  
+  /* get the file size of the local file */
+  hd = open(file, O_RDONLY) ;
+  fstat(hd, &file_info);
+  close(hd) ;
+
+  /* get a FILE * of the same file, could also be made with
+     fdopen() from the previous descriptor, but hey this is just 
+     an example! */
+  hd_src = fopen(file, "rb");
+
+  /* In windows, this will init the winsock stuff */
+  curl_global_init(CURL_GLOBAL_ALL);
+
+  /* get a curl handle */
+  curl = curl_easy_init();
+  if(curl) {
+    /* we want to use our own read function */
+    curl_easy_setopt(curl, CURLOPT_READFUNCTION, read_callback);
+
+    /* enable uploading */
+    curl_easy_setopt(curl, CURLOPT_UPLOAD, TRUE) ;
+
+    /* HTTP PUT please */
+    curl_easy_setopt(curl, CURLOPT_PUT, TRUE);
+
+    /* specify target */
+    curl_easy_setopt(curl,CURLOPT_URL, url);
+
+    /* now specify which file to upload */
+    curl_easy_setopt(curl, CURLOPT_INFILE, hd_src);
+
+    /* and give the size of the upload (optional) */
+    curl_easy_setopt(curl, CURLOPT_INFILESIZE, file_info.st_size);
+
+    /* Now run off and do what you've been told! */
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  fclose(hd_src); /* close the local file */
+
+  curl_global_cleanup();
+  return 0;
+}
--- a/docs/examples/multi-app.c
+++ b/docs/examples/multi-app.c
@@ -0,0 +1,98 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is an example application source code using the multi interface.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+/* somewhat unix-specific */
+#include <sys/time.h>
+#include <unistd.h>
+
+/* curl stuff */
+#include <curl/curl.h>
+
+/*
+ * Download a HTTP file and upload an FTP file simultaneously.
+ */
+int main(int argc, char **argv)
+{
+  CURL *http_handle;
+  CURL *ftp_handle;
+  CURLM *multi_handle;
+
+  int still_running; /* keep number of running handles */
+
+  http_handle = curl_easy_init();
+  ftp_handle  = curl_easy_init();
+
+  /* set the options (I left out a few, you'll get the point anyway) */
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://website.com");
+
+  curl_easy_setopt(ftp_handle, CURLOPT_URL, "ftp://ftpsite.com");
+  curl_easy_setopt(ftp_handle, CURLOPT_UPLOAD, TRUE);
+
+  /* init a multi stack */
+  multi_handle = curl_multi_init();
+
+  /* add the individual transfers */
+  curl_multi_add_handle(multi_handle, http_handle);
+  curl_multi_add_handle(multi_handle, ftp_handle);
+
+  /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+      /* timeout, do something else */
+      break;
+    default:
+      /* one or more of curl's file descriptors say there's data to read
+         or write */
+      curl_multi_perform(multi_handle, &still_running);
+      break;
+    }
+  }
+
+  curl_multi_cleanup(multi_handle);
+
+  curl_easy_cleanup(http_handle);
+  curl_easy_cleanup(ftp_handle);
+
+
+  return 0;
+}
--- a/docs/examples/multi-double.c
+++ b/docs/examples/multi-double.c
@@ -0,0 +1,94 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is a very simple example using the multi interface.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+/* somewhat unix-specific */
+#include <sys/time.h>
+#include <unistd.h>
+
+/* curl stuff */
+#include <curl/curl.h>
+
+/*
+ * Simply download two HTTP files!
+ */
+int main(int argc, char **argv)
+{
+  CURL *http_handle;
+  CURL *http_handle2;
+  CURLM *multi_handle;
+
+  int still_running; /* keep number of running handles */
+
+  http_handle = curl_easy_init();
+  http_handle2 = curl_easy_init();
+
+  /* set options */
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+
+  /* set options */
+  curl_easy_setopt(http_handle2, CURLOPT_URL, "http://localhost/");
+
+  /* init a multi stack */
+  multi_handle = curl_multi_init();
+
+  /* add the individual transfers */
+  curl_multi_add_handle(multi_handle, http_handle);
+  curl_multi_add_handle(multi_handle, http_handle2);
+
+  /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+    default:
+      /* timeout or readable/writable sockets */
+      curl_multi_perform(multi_handle, &still_running);
+      break;
+    }
+  }
+
+  curl_multi_cleanup(multi_handle);
+
+  curl_easy_cleanup(http_handle);
+  curl_easy_cleanup(http_handle2);
+
+  return 0;
+}
--- a/docs/examples/multi-post.c
+++ b/docs/examples/multi-post.c
@@ -0,0 +1,126 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is an example application source code using the multi interface
+ * to do a multipart formpost without "blocking".
+ */
+#include <stdio.h>
+#include <string.h>
+#include <sys/time.h>
+
+#include <curl/curl.h>
+
+int main(int argc, char *argv[])
+{
+  CURL *curl;
+  CURLcode res;
+
+  CURLM *multi_handle;
+  int still_running;
+
+  struct HttpPost *formpost=NULL;
+  struct HttpPost *lastptr=NULL;
+  struct curl_slist *headerlist=NULL;
+  char buf[] = "Expect:";
+
+  /* Fill in the file upload field */
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "sendfile",
+               CURLFORM_FILE, "postit2.c",
+               CURLFORM_END);
+
+  /* Fill in the filename field */
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "filename",
+               CURLFORM_COPYCONTENTS, "postit2.c",
+               CURLFORM_END);
+
+
+  /* Fill in the submit field too, even if this is rarely needed */
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "submit",
+               CURLFORM_COPYCONTENTS, "send",
+               CURLFORM_END);
+
+  curl = curl_easy_init();
+  multi_handle = curl_multi_init();
+
+  /* initalize custom header list (stating that Expect: 100-continue is not
+     wanted */
+  headerlist = curl_slist_append(headerlist, buf);
+  if(curl && multi_handle) {
+    int perform=0;
+
+    /* what URL that receives this POST */
+    curl_easy_setopt(curl, CURLOPT_URL,
+                     "http://www.fillinyoururl.com/upload.cgi");
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+
+    curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);
+    curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost);
+
+    curl_multi_add_handle(multi_handle, curl);
+
+    while(CURLM_CALL_MULTI_PERFORM ==
+          curl_multi_perform(multi_handle, &still_running));
+
+    while(still_running) {
+      struct timeval timeout;
+      int rc; /* select() return code */
+
+      fd_set fdread;
+      fd_set fdwrite;
+      fd_set fdexcep;
+      int maxfd;
+
+      FD_ZERO(&fdread);
+      FD_ZERO(&fdwrite);
+      FD_ZERO(&fdexcep);
+
+      /* set a suitable timeout to play around with */
+      timeout.tv_sec = 1;
+      timeout.tv_usec = 0;
+
+      /* get file descriptors from the transfers */
+      curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+      rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+      switch(rc) {
+      case -1:
+        /* select error */
+        break;
+      case 0:
+        printf("timeout!\n");
+      default:
+        /* timeout or readable/writable sockets */
+        printf("perform!\n");
+        while(CURLM_CALL_MULTI_PERFORM ==
+              curl_multi_perform(multi_handle, &still_running));
+        printf("running: %d!\n", still_running);
+        break;
+      }
+    }
+
+    curl_multi_cleanup(multi_handle);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+
+    /* then cleanup the formpost chain */
+    curl_formfree(formpost);
+
+    /* free slist */
+    curl_slist_free_all (headerlist);
+  }
+  return 0;
+}
--- a/docs/examples/multi-single.c
+++ b/docs/examples/multi-single.c
@@ -0,0 +1,87 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * This is a very simple example using the multi interface.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+/* somewhat unix-specific */
+#include <sys/time.h>
+#include <unistd.h>
+
+/* curl stuff */
+#include <curl/curl.h>
+
+/*
+ * Simply download a HTTP file.
+ */
+int main(int argc, char **argv)
+{
+  CURL *http_handle;
+  CURLM *multi_handle;
+
+  int still_running; /* keep number of running handles */
+
+  http_handle = curl_easy_init();
+
+  /* set the options (I left out a few, you'll get the point anyway) */
+  curl_easy_setopt(http_handle, CURLOPT_URL, "http://www.haxx.se/");
+
+  /* init a multi stack */
+  multi_handle = curl_multi_init();
+
+  /* add the individual transfers */
+  curl_multi_add_handle(multi_handle, http_handle);
+
+  /* we start some action by calling perform right away */
+  while(CURLM_CALL_MULTI_PERFORM ==
+        curl_multi_perform(multi_handle, &still_running));
+
+  while(still_running) {
+    struct timeval timeout;
+    int rc; /* select() return code */
+
+    fd_set fdread;
+    fd_set fdwrite;
+    fd_set fdexcep;
+    int maxfd;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* set a suitable timeout to play around with */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi_handle, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    switch(rc) {
+    case -1:
+      /* select error */
+      break;
+    case 0:
+    default:
+      /* timeout or readable/writable sockets */
+      curl_multi_perform(multi_handle, &still_running);
+      break;
+    }
+  }
+
+  curl_multi_cleanup(multi_handle);
+
+  curl_easy_cleanup(http_handle);
+
+  return 0;
+}
--- a/docs/examples/post-callback.c
+++ b/docs/examples/post-callback.c
@@ -0,0 +1,89 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * An example source code that issues a HTTP POST and we provide the actual
+ * data through a read callback.
+ *
+ * Please be aware of the fact that the size of the posted data MUST be
+ * specified before the transfer is being made (with CURLOPT_POSTFIELDSIZE).
+ * This requirement will change when libcurl starts supporting chunked-encoded
+ * sends.
+ *
+ * This example requires libcurl 7.9.6 or later.
+ */
+#include <stdio.h>
+#include <string.h>
+#include <curl/curl.h>
+
+#if LIBCURL_VERSION_NUM < 0x070906
+#error this example source requires libcurl 7.9.6 or newer
+#endif
+
+char data[]="this is what we post to the silly web server";
+
+struct WriteThis {
+  char *readptr;
+  int sizeleft;
+};
+
+size_t read_callback(void *ptr, size_t size, size_t nmemb, void *userp)
+{
+  struct WriteThis *pooh = (struct WriteThis *)userp;
+
+  if(size*nmemb < 1)
+    return 0;
+
+  if(pooh->sizeleft) {
+    *(char *)ptr = pooh->readptr[0]; /* copy one single byte */
+    pooh->readptr++;                 /* advance pointer */
+    pooh->sizeleft--;                /* less data left */
+    return 1;                        /* we return 1 byte at a time! */
+  }
+
+  return -1;                         /* no more data left to deliver */
+}
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  struct WriteThis pooh;
+
+  pooh.readptr = data;
+  pooh.sizeleft = strlen(data);
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* First set the URL that is about to receive our POST. */
+    curl_easy_setopt(curl, CURLOPT_URL,
+                     "http://receivingsite.com.pooh/index.cgi");
+    /* Now specify we want to POST data */
+    curl_easy_setopt(curl, CURLOPT_POST, TRUE);
+
+    /* Set the expected POST size */
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, pooh.sizeleft);
+
+    /* we want to use our own read function */
+    curl_easy_setopt(curl, CURLOPT_READFUNCTION, read_callback);
+
+    /* pointer to pass to our read function */
+    curl_easy_setopt(curl, CURLOPT_INFILE, &pooh);
+
+    /* get verbose debug output please */
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
+
+    /* Perform the request, res will get the return code */
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}
--- a/docs/examples/postit2.c
+++ b/docs/examples/postit2.c
@@ -25,39 +25,58 @@
   win32socket.c file as well */

 #include <stdio.h>
+#include <string.h>

 #include <curl/curl.h>
 #include <curl/types.h>
 #include <curl/easy.h>

-int main(int argc, char **argv)
+#if LIBCURL_VERSION_NUM < 0x070900
+#error "curl_formadd() is not introduced until libcurl 7.9 and later"
+#endif
+
+int main(int argc, char *argv[])
 {
  CURL *curl;
  CURLcode res;

  struct HttpPost *formpost=NULL;
  struct HttpPost *lastptr=NULL;
+  struct curl_slist *headerlist=NULL;
+  char buf[] = "Expect:";

  /* Fill in the file upload field */
-  curl_formparse("sendfile=@foo",
-                 &formpost,
-                 &lastptr);
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "sendfile",
+               CURLFORM_FILE, "postit2.c",
+               CURLFORM_END);

  /* Fill in the filename field */
-  curl_formparse("filename=foo",
-                 &formpost,
-                 &lastptr);
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "filename",
+               CURLFORM_COPYCONTENTS, "postit2.c",
+               CURLFORM_END);
  

  /* Fill in the submit field too, even if this is rarely needed */
-  curl_formparse("submit=send",
-                 &formpost,
-                 &lastptr);
+  curl_formadd(&formpost,
+               &lastptr,
+               CURLFORM_COPYNAME, "submit",
+               CURLFORM_COPYCONTENTS, "send",
+               CURLFORM_END);

  curl = curl_easy_init();
+  /* initalize custom header list (stating that Expect: 100-continue is not
+     wanted */
+  headerlist = curl_slist_append(headerlist, buf);
  if(curl) {
    /* what URL that receives this POST */
    curl_easy_setopt(curl, CURLOPT_URL, "http://curl.haxx.se/examplepost.cgi");
+    if ( (argc == 2) && (!strcmp(argv[1], "noexpectheader")) )
+      /* only disable 100-continue header if explicitly requested */
+      curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);
    curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost);
    res = curl_easy_perform(curl);

@@ -66,6 +85,8 @@ int main(int argc, char **argv)

    /* then cleanup the formpost chain */
    curl_formfree(formpost);
+    /* free slist */
+    curl_slist_free_all (headerlist);
  }
  return 0;
 }
--- a/docs/examples/sepheaders.c
+++ b/docs/examples/sepheaders.c
@@ -63,6 +63,10 @@ int main(int argc, char **argv)
  /* we want the headers to this file handle */
  curl_easy_setopt(curl_handle,   CURLOPT_WRITEHEADER ,headerfile);

+  /*
+   * Notice here that if you want the actual data sent anywhere else but
+   * stdout, you should consider using the CURLOPT_WRITEDATA option.  */
+
  /* get it! */
  curl_easy_perform(curl_handle);

--- a/docs/examples/simple.c
+++ b/docs/examples/simple.c
@@ -9,27 +9,16 @@
 */

 #include <stdio.h>
-
 #include <curl/curl.h>
-#include <curl/types.h>
-#include <curl/easy.h>

-/* to make this work under windows, use the win32-functions from the
-   win32socket.c file as well */
-
-int main(int argc, char **argv)
+int main(void)
 {
  CURL *curl;
  CURLcode res;
-  FILE *headerfile;
-
-  headerfile = fopen("dumpit", "w");

  curl = curl_easy_init();
  if(curl) {
-    /* what call to write: */
    curl_easy_setopt(curl, CURLOPT_URL, "curl.haxx.se");
-    curl_easy_setopt(curl, CURLOPT_WRITEHEADER, headerfile);
    res = curl_easy_perform(curl);

    /* always cleanup */
--- a/docs/examples/simplepost.c
+++ b/docs/examples/simplepost.c
@@ -0,0 +1,36 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <curl/curl.h>
+
+int main(void)
+{
+  CURL *curl;
+  CURLcode res;
+
+  char *postthis="moo mooo moo moo";
+
+  curl = curl_easy_init();
+  if(curl) {
+    curl_easy_setopt(curl, CURLOPT_URL, "http://posthere.com");
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDS, postthis);
+
+    /* if we don't provide POSTFIELDSIZE, libcurl will strlen() by
+       itself */
+    curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, strlen(postthis));
+
+    res = curl_easy_perform(curl);
+
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+  return 0;
+}
--- a/docs/examples/simplessl.c
+++ b/docs/examples/simplessl.c
@@ -0,0 +1,118 @@
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+
+#include <curl/curl.h>
+#include <curl/types.h>
+#include <curl/easy.h>
+
+
+/* some requirements for this to work:
+   1.   set pCertFile to the file with the client certificate
+   2.   if the key is passphrase protected, set pPassphrase to the
+        passphrase you use
+   3.   if you are using a crypto engine:
+   3.1. set a #define USE_ENGINE
+   3.2. set pEngine to the name of the crypto engine you use
+   3.3. set pKeyName to the key identifier you want to use
+   4.   if you don't use a crypto engine:
+   4.1. set pKeyName to the file name of your client key
+   4.2. if the format of the key file is DER, set pKeyType to "DER"
+
+   !! verify of the server certificate is not implemented here !!
+
+   **** This example only works with libcurl 7.9.3 and later! ****
+
+*/
+
+int main(int argc, char **argv)
+{
+  CURL *curl;
+  CURLcode res;
+  FILE *headerfile;
+
+  const char *pCertFile = "testcert.pem";
+  const char *pCACertFile="cacert.pem"
+
+  const char *pKeyName;
+  const char *pKeyType;
+
+  const char *pEngine;
+
+#if USE_ENGINE
+  pKeyName  = "rsa_test";
+  pKeyType  = "ENG";
+  pEngine   = "chil";            /* for nChiper HSM... */
+#else
+  pKeyName  = "testkey.pem";
+  pKeyType  = "PEM";
+  pEngine   = NULL;
+#endif
+
+  const char *pPassphrase = NULL;
+
+  headerfile = fopen("dumpit", "w");
+
+  curl_global_init(CURL_GLOBAL_DEFAULT);
+
+  curl = curl_easy_init();
+  if(curl) {
+    /* what call to write: */
+    curl_easy_setopt(curl, CURLOPT_URL, "HTTPS://curl.haxx.se");
+    curl_easy_setopt(curl, CURLOPT_WRITEHEADER, headerfile);
+
+    while(1)                    /* do some ugly short cut... */
+    {
+       if (pEngine)             /* use crypto engine */
+       {
+          if (curl_easy_setopt(curl, CURLOPT_SSLENGINE,pEngine) != CURLE_OK)
+          {                     /* load the crypto engine */
+             fprintf(stderr,"can't set crypto engine\n");
+             break;
+          }
+          if (curl_easy_setopt(curl, CURLOPT_SSLENGINE_DEFAULT,1) != CURLE_OK)
+          {                     /* set the crypto engine as default */
+                                /* only needed for the first time you load
+                                   a engine in a curl object... */
+             fprintf(stderr,"can't set crypto engine as default\n");
+             break;
+          }
+       }
+                                /* cert is stored PEM coded in file... */
+                                /* since PEM is default, we needn't set it for PEM */
+       curl_easy_setopt(curl,CURLOPT_SSLCERTTYPE,"PEM");
+                                /* set the cert for client authentication */
+       curl_easy_setopt(curl,CURLOPT_SSLCERT,pCertFile);
+                                /* sorry, for engine we must set the passphrase
+                                   (if the key has one...) */
+       if (pPassphrase)
+          curl_easy_setopt(curl,CURLOPT_SSLKEYPASSWD,pPassphrase);
+                                /* if we use a key stored in a crypto engine,
+                                   we must set the key type to "ENG" */
+       curl_easy_setopt(curl,CURLOPT_SSLKEYTYPE,pKeyType);
+                                /* set the private key (file or ID in engine) */
+       curl_easy_setopt(curl,CURLOPT_SSLKEY,pKeyName);
+                                /* set the file with the certs vaildating the server */
+       curl_easy_setopt(curl,CURLOPT_CAINFO,pCACertFile);
+                                /* disconnect if we can't validate server's cert */
+       curl_easy_setopt(curl,CURLOPT_SSL_VERIFYPEER,1);
+       
+       res = curl_easy_perform(curl);
+       break;                   /* we are done... */
+    }
+    /* always cleanup */
+    curl_easy_cleanup(curl);
+  }
+
+  curl_global_cleanup();
+
+  return 0;
+}
--- a/docs/examples/win32sockets.c
+++ b/docs/examples/win32sockets.c
@@ -1,40 +0,0 @@
-/*
- * These are example functions doing socket init that Windows
- * require. If you don't use windows, you can safely ignore this crap.
- */
-
-static void win32_cleanup(void)
-{
-  WSACleanup();
-}
-
-static CURLcode win32_init(void)
-{
-  WORD wVersionRequested;  
-  WSADATA wsaData; 
-  int err; 
-  wVersionRequested = MAKEWORD(1, 1); 
-    
-  err = WSAStartup(wVersionRequested, &wsaData); 
-    
-  if (err != 0) 
-    /* Tell the user that we couldn't find a useable */ 
-    /* winsock.dll.     */ 
-    return 1;
-    
-  /* Confirm that the Windows Sockets DLL supports 1.1.*/ 
-  /* Note that if the DLL supports versions greater */ 
-  /* than 1.1 in addition to 1.1, it will still return */ 
-  /* 1.1 in wVersion since that is the version we */ 
-  /* requested. */ 
-    
-  if ( LOBYTE( wsaData.wVersion ) != 1 || 
-       HIBYTE( wsaData.wVersion ) != 1 ) { 
-    /* Tell the user that we couldn't find a useable */ 
-
-    /* winsock.dll. */ 
-    WSACleanup(); 
-    return 1; 
-  }
-  return 0; /* 0 is ok */
-}
--- a/docs/index.html
+++ b/docs/index.html
@@ -0,0 +1,21 @@
+<HTML>
+<HEAD>
+<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
+<TITLE>Index to Curl documentation</TITLE>
+</HEAD>
+
+<BODY>
+<H1 ALIGN="CENTER">Index to Curl documentation</H1>
+
+<H2>Programs</H2>
+<a href="curl-config.html">curl-config</A>
+<br><a href="curl.html">curl</A>
+
+<h2>Tutorial</h2>
+<a href="TheArtOfHttpScripting">The Art Of Scripting HTTP Requests Using Curl</a> (plain text)
+
+<h2>libcurl</h2>
+See the <a href="libcurl/index.html">libcurl section</a>
+
+</BODY>
+</HTML>
--- a/docs/libcurl-the-guide
+++ b/docs/libcurl-the-guide
--- a/docs/libcurl/.cvsignore
+++ b/docs/libcurl/.cvsignore
@@ -0,0 +1,3 @@
+Makefile
+Makefile.in
+*html
--- a/docs/libcurl/Makefile.am
+++ b/docs/libcurl/Makefile.am
@@ -0,0 +1,90 @@
+#
+# $Id$
+#
+
+AUTOMAKE_OPTIONS = foreign no-dependencies
+
+man_MANS = \
+	curl_easy_cleanup.3 \
+	curl_easy_getinfo.3 \
+	curl_easy_init.3 \
+	curl_easy_perform.3 \
+	curl_easy_setopt.3 \
+	curl_easy_duphandle.3 \
+	curl_formparse.3 \
+	curl_formadd.3 \
+	curl_formfree.3 \
+	curl_getdate.3 \
+	curl_getenv.3 \
+	curl_slist_append.3 \
+	curl_slist_free_all.3 \
+	curl_version.3 \
+	curl_version_info.3 \
+	curl_escape.3 \
+	curl_unescape.3 \
+	curl_free.3 \
+	curl_strequal.3 \
+	curl_strnequal.3 \
+	curl_mprintf.3 \
+	curl_global_init.3 \
+	curl_global_cleanup.3 \
+	libcurl.3 \
+	curl_multi_add_handle.3 \
+	curl_multi_cleanup.3 \
+	curl_multi_fdset.3 \
+	curl_multi_info_read.3 \
+	curl_multi_init.3 \
+	curl_multi_perform.3 \
+	curl_multi_remove_handle.3 \
+	libcurl-multi.3 \
+	libcurl-errors.3
+
+HTMLPAGES = \
+	curl_easy_cleanup.html \
+	curl_easy_getinfo.html \
+	curl_easy_init.html \
+	curl_easy_perform.html \
+	curl_easy_setopt.html \
+	curl_easy_duphandle.html \
+	curl_formadd.html \
+	curl_formparse.html \
+	curl_formfree.html \
+	curl_getdate.html \
+	curl_getenv.html \
+	curl_slist_append.html \
+	curl_slist_free_all.html \
+	curl_version.html \
+	curl_version_info.html \
+	curl_escape.html \
+	curl_unescape.html \
+	curl_free.html \
+	curl_strequal.html \
+	curl_strnequal.html \
+	curl_mprintf.html \
+	curl_global_init.html \
+	curl_global_cleanup.html \
+	libcurl.html \
+	curl_multi_add_handle.html \
+	curl_multi_cleanup.html \
+	curl_multi_fdset.html \
+	curl_multi_info_read.html \
+	curl_multi_init.html \
+	curl_multi_perform.html \
+	curl_multi_remove_handle.html \
+	libcurl-multi.html \
+	libcurl-errors.html \
+	index.html
+
+EXTRA_DIST = $(man_MANS) $(HTMLPAGES)
+
+MAN2HTML= gnroff -man $< | man2html >$@
+
+SUFFIXES = .1 .3 .html
+
+html: $(HTMLPAGES)
+
+.3.html:
+	$(MAN2HTML)
+
+.1.html:
+	$(MAN2HTML)
--- a/docs/libcurl/curl_easy_cleanup.3
+++ b/docs/libcurl/curl_easy_cleanup.3
@@ -0,0 +1,25 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_easy_cleanup 3 "4 March 2002" "libcurl 7.7" "libcurl Manual"
+.SH NAME
+curl_easy_cleanup - End a libcurl easy session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "void curl_easy_cleanup(CURL *" handle ");"
+.ad
+.SH DESCRIPTION
+This function must be the last function to call for an easy session. It is the
+opposite of the \fIcurl_easy_init\fP function and must be called with the same
+\fIhandle\fP as input that the curl_easy_init call returned.
+
+This will effectively close all connections this handle has used and possibly
+has kept open until now. Don't call this function if you intend to transfer
+more files.
+.SH RETURN VALUE
+None
+.SH "SEE ALSO"
+.BR curl_easy_init "(3), "
+
--- a/docs/libcurl/curl_easy_duphandle.3
+++ b/docs/libcurl/curl_easy_duphandle.3
@@ -0,0 +1,37 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_easy_duphandle 3 "18 September 2001" "libcurl 7.9" "libcurl Manual"
+.SH NAME
+curl_easy_duphandle - Clone a libcurl session handle
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURL *curl_easy_duphandle(CURL *"handle ");"
+.ad
+.SH DESCRIPTION
+This function will return a new curl handle, a duplicate, using all the
+options previously set in the input curl \fIhandle\fP. Both handles can
+subsequently be used independently and they must both be freed with
+\fIcurl_easy_cleanup()\fP.
+
+All strings that the input handle has been told to point to (as opposed to
+copy) with previous calls to \fIcurl_easy_setopt\fP using char * inputs, will
+be pointed to by the new handle as well. You must therefore make sure to keep
+the data around until both handles have been cleaned up.
+
+The new handle will \fBnot\fP inherit any state information, no connections,
+no SSL sessions and no cookies.
+
+\fBNote\fP that even in multi-threaded programs, this function must be called
+in a synchronous way, the input handle may not be in use when cloned.
+
+This function was added in libcurl 7.9.
+.SH RETURN VALUE
+If this function returns NULL, something went wrong and no valid handle was
+returned.
+.SH "SEE ALSO"
+.BR curl_easy_init "(3)," curl_easy_cleanup "(3)," curl_global_init "(3)
+.SH BUGS
+Surely there are some, you tell me!
--- a/docs/libcurl/curl_easy_getinfo.3
+++ b/docs/libcurl/curl_easy_getinfo.3
@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_easy_init 3 "5 March 2001" "libcurl 7.6.1" "libcurl Manual"
+.TH curl_easy_init 3 "25 Apr 2002" "libcurl 7.9.7" "libcurl Manual"
 .SH NAME
 curl_easy_getinfo - Extract information from a curl session (added in 7.4)
 .SH SYNOPSIS
@@ -30,13 +30,17 @@ Pass a pointer to a long to receive the last received HTTP code.
 .TP
 .B CURLINFO_FILETIME
 Pass a pointer to a long to receive the remote time of the retrieved
-document. If you get 0, it can be because of many reasons (unknown, the server
-hides it or the server doesn't support the command that tells document time
-etc) and the time of the document is unknown. (Added in 7.5)
+document. If you get -1, it can be because of many reasons (unknown, the
+server hides it or the server doesn't support the command that tells document
+time etc) and the time of the document is unknown. Note that you must tell the
+server to collect this information before the transfer is made, by using the
+CURLOPT_FILETIME option to \fIcurl_easy_setopt(3)\fP. (Added in 7.5)
 .TP
 .B CURLINFO_TOTAL_TIME
 Pass a pointer to a double to receive the total transaction time in seconds
-for the previous transfer.
+for the previous transfer. This time does not include the connect time, so if
+you want the complete operation time, you should add the
+CURLINFO_CONNECT_TIME.
 .TP
 .B CURLINFO_NAMELOOKUP_TIME
 Pass a pointer to a double to receive the time, in seconds, it took from the
@@ -52,6 +56,22 @@ start until the file transfer is just about to begin. This includes all
 pre-transfer commands and negotiations that are specific to the particular
 protocol(s) involved.
 .TP
+.B CURLINFO_STARTTRANSFER_TIME
+Pass a pointer to a double to receive the time, in seconds, it took from the
+start until the first byte is just about to be transfered. This includes
+CURLINFO_PRETRANSFER_TIME and also the time the server needs to calculate
+the result.
+.TP
+.B CURLINFO_REDIRECT_TIME
+Pass a pointer to a double to receive the total time, in seconds, it took for
+all redirection steps include name lookup, connect, pretransfer and transfer
+before final transaction was started. CURLINFO_REDIRECT_TIME contains the
+complete execution time for multiple redirections.  (Added in 7.9.7)
+.TP
+.B CURLINFO_REDIRECT_COUNT
+Pass a pointer to a long to receive the total number of redirections that were
+actually followed.  (Added in 7.9.7)
+.TP
 .B CURLINFO_SIZE_UPLOAD
 Pass a pointer to a double to receive the total amount of bytes that were
 uploaded.
@@ -89,6 +109,12 @@ is the value read from the Content-Length: field.  (Added in 7.6.1)
 .B CURLINFO_CONTENT_LENGTH_UPLOAD
 Pass a pointer to a double to receive the specified size of the upload.
 (Added in 7.6.1)
+.TP
+.B CURLINFO_CONTENT_TYPE
+Pass a pointer to a 'char *' to receive the content-type of the downloaded
+object. This is the value read from the Content-Type: field. If you get NULL,
+it means that the server didn't send a valid Content-Type header or that the
+protocol used doesn't support this.  (Added in 7.9.4)
 .PP

 .SH RETURN VALUE
--- a/docs/libcurl/curl_easy_init.3
+++ b/docs/libcurl/curl_easy_init.3
@@ -0,0 +1,25 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_easy_init 3 "4 March 2002" "libcurl 7.8.1" "libcurl Manual"
+.SH NAME
+curl_easy_init - Start a libcurl easy session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURL *curl_easy_init( );"
+.ad
+.SH DESCRIPTION
+This function must be the first function to call, and it returns a CURL easy
+handle that you must use as input to other easy-functions. curl_easy_init
+intializes curl and this call MUST have a corresponding call to
+\fIcurl_easy_cleanup\fP when the operation is complete.
+
+.SH RETURN VALUE
+If this function returns NULL, something went wrong and you cannot use the
+other curl functions.
+.SH "SEE ALSO"
+.BR curl_easy_cleanup "(3), " curl_global_init "(3)
+.SH BUGS
+Surely there are some, you tell me!
--- a/docs/libcurl/curl_easy_perform.3
+++ b/docs/libcurl/curl_easy_perform.3
--- a/docs/libcurl/curl_easy_setopt.3
+++ b/docs/libcurl/curl_easy_setopt.3
@@ -0,0 +1,769 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_easy_setopt 3 "18 Sep 2002" "libcurl 7.10" "libcurl Manual"
+.SH NAME
+curl_easy_setopt - set options for a curl easy handle
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLoption option, parameter);
+.ad
+.SH DESCRIPTION
+curl_easy_setopt() is used to tell libcurl how to behave. By using the
+appropriate options to \fIcurl_easy_setopt\fP, you can change libcurl's
+behavior.  All options are set with the \fIoption\fP followed by a
+\fIparameter\fP. That parameter can be a long, a function pointer or an object
+pointer, all depending on what the specific option expects. Read this manual
+carefully as bad input values may cause libcurl to behave badly!  You can only
+set one option in each function call. A typical application uses many
+curl_easy_setopt() calls in the setup phase.
+
+\fBNOTE:\fP strings passed to libcurl as 'char *' arguments, will not be
+copied by the library. Instead you should keep them available until libcurl no
+longer needs them. Failing to do so will cause very odd behavior or even
+crashes.
+
+\fBNOTE2:\fP options set with this function call are valid for the forthcoming
+data transfers that are performed when you invoke \fIcurl_easy_perform\fP.
+The options are not in any way reset between transfers, so if you want
+subsequent transfers with different options, you must change them between the
+transfers.
+
+The \fIhandle\fP is the return code from a \fIcurl_easy_init(3)\fP or
+\fIcurl_easy_duphandle(3)\fP call.
+.SH BEHAVIOR OPTIONS
+.TP 0.4i
+.B CURLOPT_VERBOSE
+Set the parameter to non-zero to get the library to display a lot of verbose
+information about its operations. Very useful for libcurl and/or protocol
+debugging and understanding.
+
+You hardly ever want this set in production use, you will almost always want
+this when you debug/report problems. Another neat option for debugging is the
+\fICURLOPT_DEBUGFUNCTION\fP.
+.TP
+.B CURLOPT_HEADER
+A non-zero parameter tells the library to include the header in the body
+output. This is only relevant for protocols that actually have headers
+preceding the data (like HTTP).
+.TP
+.B CURLOPT_NOPROGRESS
+A non-zero parameter tells the library to shut of the built-in progress meter
+completely.
+
+\fBNOTE:\fP future versions of libcurl is likely to not have any built-in
+progress meter at all.
+.TP
+.B CURLOPT_NOSIGNAL
+Pass a long. If it is non-zero, libcurl will not use any functions that
+install signal handlers or any functions that cause signals to be sent to the
+process. This option is mainly here to allow multi-threaded unix applications
+to still set/use all timeout options etc, without risking getting signals.
+(Added in 7.10)
+.PP
+.SH CALLBACK OPTIONS
+.TP 0.4i
+.B CURLOPT_WRITEFUNCTION
+Function pointer that should match the following prototype: \fBsize_t
+function( void *ptr, size_t size, size_t nmemb, void *stream);\fP This
+function gets called by libcurl as soon as there is data reveiced that needs
+to be saved. The size of the data pointed to by \fIptr\fP is \fIsize\fP
+multiplied with \fInmemb\fP.  Return the number of bytes actually taken care
+of. If that amount differs from the amount passed to your function, it'll
+signal an error to the library and it will abort the transfer and return
+\fICURLE_WRITE_ERROR\fP.
+
+Set the \fIstream\fP argument with the \fBCURLOPT_FILE\fP option.
+
+\fBNOTE:\fP you will be passed as much data as possible in all invokes, but
+you cannot possibly make any assumptions. It may be one byte, it may be
+thousands. The maximum amount of data that can be passed to the write callback
+is defined in the curl.h header file: CURL_MAX_WRITE_SIZE.
+.TP
+.B CURLOPT_WRITEDATA
+Data pointer to pass to the file write function. Note that if you specify the
+\fICURLOPT_WRITEFUNCTION\fP, this is the pointer you'll get as input. If you
+don't use a callback, you must pass a 'FILE *' as libcurl will pass this to
+fwrite() when writing data.
+
+\fBNOTE:\fP If you're using libcurl as a win32 DLL, you MUST use the
+\fICURLOPT_WRITEFUNCTION\fP if you set this option or you will experience
+crashes.
+
+This option is also known with the older name \fBCURLOPT_FILE\fP, the name
+CURLOPT_WRITEDATA was introduced in 7.9.7.
+.TP
+.B CURLOPT_READFUNCTION
+Function pointer that should match the following prototype: \fBsize_t
+function( void *ptr, size_t size, size_t nmemb, void *stream);\fP This
+function gets called by libcurl as soon as it needs to read data in order to
+send it to the peer. The data area pointed at by the pointer \fIptr\fP may be
+filled with at most \fIsize\fP multiplied with \fInmemb\fP number of
+bytes. Your function must return the actual number of bytes that you stored in
+that memory area. Returning 0 will signal end-of-file to the library and cause
+it to stop the current transfer.
+.TP
+.B CURLOPT_READDATA
+Data pointer to pass to the file read function. Note that if you specify the
+\fICURLOPT_READFUNCTION\fP, this is the pointer you'll get as input. If you
+don't specify a read callback, this must be a valid FILE *.
+
+\fBNOTE:\fP If you're using libcurl as a win32 DLL, you MUST use a
+\fICURLOPT_READFUNCTION\fP if you set this option.
+
+This option is also known with the older name \fBCURLOPT_INFILE\fP, the name
+CURLOPT_READDATA was introduced in 7.9.7.
+.TP
+.B CURLOPT_PROGRESSFUNCTION
+Function pointer that should match the \fIcurl_progress_callback\fP prototype
+found in \fI<curl/curl.h>\fP. This function gets called by libcurl instead of
+its internal equivalent with a frequent interval during data transfer.
+Unknown/unused argument values will be set to zero (like if you only download
+data, the upload size will remain 0). Returning a non-zero value from this
+callback will cause libcurl to abort the transfer and return
+\fICURLE_ABORTED_BY_CALLBACK\fP.
+
+Also note that \fICURLOPT_NOPROGRESS\fP must be set to FALSE to make this
+function actually get called.
+.TP
+.B CURLOPT_PROGRESSDATA
+Pass a pointer that will be untouched by libcurl and passed as the first
+argument in the progress callback set with \fICURLOPT_PROGRESSFUNCTION\fP.
+.TP
+.B CURLOPT_PASSWDFUNCTION
+Pass a pointer to a \fIcurl_passwd_callback\fP function that will be called
+instead of the internal one if libcurl requests a password. The function must
+match this prototype: \fBint getpass(void *client, char *prompt, char* buffer,
+int buflen );\fP.  If set to NULL, it sets back the function to the internal
+default one. If the function returns a non-zero value, it will abort the
+operation and an error (CURLE_BAD_PASSWORD_ENTERED) will be returned.
+\fIclient\fP is a generic pointer, see \fICURLOPT_PASSWDDATA\fP.  \fIprompt\fP
+is a zero-terminated string that is text that prefixes the input request.
+\fIbuffer\fP is a pointer to data where the entered password should be stored
+and \fIbuflen\fP is the maximum number of bytes that may be written in the
+buffer.  (Added in 7.4.2)
+.TP
+.B CURLOPT_PASSWDDATA
+Pass a void * to whatever data you want. The passed pointer will be the first
+argument sent to the specifed \fICURLOPT_PASSWDFUNCTION\fP function. (Added in
+7.4.2)
+.TP
+.B CURLOPT_HEADERFUNCTION
+Function pointer that should match the following prototype: \fIsize_t
+function( void *ptr, size_t size, size_t nmemb, void *stream);\fP. This
+function gets called by libcurl as soon as there is received header data that
+needs to be written down. The headers are guaranteed to be written one-by-one
+and only complete lines are written. Parsing headers should be easy enough
+using this. The size of the data pointed to by \fIptr\fP is \fIsize\fP
+multiplied with \fInmemb\fP.  The pointer named \fIstream\fP will be the one
+you passed to libcurl with the \fICURLOPT_WRITEHEADER\fP option.  Return the
+number of bytes actually written or return -1 to signal error to the library
+(it will cause it to abort the transfer with a \fICURLE_WRITE_ERROR\fP return
+code). (Added in 7.7.2)
+.TP
+.B CURLOPT_WRITEHEADER
+Pass a pointer to be used to write the header part of the received data to. If
+you don't use your own callback to take care of the writing, this must be a
+valid FILE *. See also the \fICURLOPT_HEADERFUNCTION\fP option below on how to
+set a custom get-all-headers callback.
+.TP
+.B CURLOPT_DEBUGFUNCTION
+Function pointer that should match the following prototype: \fIint
+curl_debug_callback (CURL *, curl_infotype, char *, size_t, void *);\fP
+This function will receive debug information if CURLOPT_VERBOSE is
+enabled. The curl_infotype argument specifies what kind of information it
+is. This funtion must return 0.
+.TP
+.B CURLOPT_DEBUGDATA
+Pass a pointer to whatever you want passed in to your CURLOPT_DEBUGFUNCTION in
+the last void * argument. This pointer is not used by libcurl, it is only
+passed to the callback.
+.PP
+.SH ERROR OPTIONS
+.TP 0.4i
+.B CURLOPT_ERRORBUFFER
+Pass a char * to a buffer that the libcurl may store human readable error
+messages in. This may be more helpful than just the return code from the
+library. The buffer must be at least CURL_ERROR_SIZE big.
+
+Use \fICURLOPT_VERBOSE\fP and \fICURLOPT_DEBUGFUNCTION\fP to better
+debug/trace why errors happen.
+
+\fBNote:\fP if the library does not return an error, the buffer may not have
+been touched. Do not rely on the contents in those cases.
+.TP
+.B CURLOPT_STDERR
+Pass a FILE * as parameter. This is the stream to use instead of stderr
+internally when reporting errors.
+.TP
+.B CURLOPT_FAILONERROR
+A non-zero parameter tells the library to fail silently if the HTTP code
+returned is equal to or larger than 300. The default action would be to return
+the page normally, ignoring that code.
+.PP
+.SH NETWORK OPTIONS
+.TP 0.4i
+.B CURLOPT_URL
+The actual URL to deal with. The parameter should be a char * to a zero
+terminated string. The string must remain present until curl no longer needs
+it, as it doesn't copy the string.
+
+\fBNOTE:\fP this option is (the only one) required to be set before
+\fIcurl_easy_perform(3)\fP is called.
+.TP
+.B CURLOPT_PROXY
+Set HTTP proxy to use. The parameter should be a char * to a zero terminated
+string holding the host name or dotted IP address. To specify port number in
+this string, append :[port] to the end of the host name. The proxy string may
+be prefixed with [protocol]:// since any such prefix will be ignored. The
+proxy's port number may optionally be specified with the separate option
+\fICURLOPT_PROXYPORT\fP.
+
+\fBNOTE:\fP when you tell the library to use a HTTP proxy, libcurl will
+transparently convert operations to HTTP even if you specify a FTP URL
+etc. This may have an impact on what other features of the library you can
+use, such as CURLOPT_QUOTE and similar FTP specifics that don't work unless
+you tunnel through the HTTP proxy. Such tunneling is activated with
+\fICURLOPT_HTTPPROXYTUNNEL\fP.
+
+\fBNOTE2:\fP libcurl respects the environment variables \fBhttp_proxy\fP,
+\fBftp_proxy\fP, \fBall_proxy\fP etc, if any of those is set.
+.TP
+.B CURLOPT_PROXYPORT
+Pass a long with this option to set the proxy port to connect to unless it is
+specified in the proxy string \fICURLOPT_PROXY\fP.
+.TP
+.B CURLOPT_PROXTYPE
+Pass a long with this option to set type of the proxy. Available options for
+this are CURLPROXY_HTTP and CURLPROXY_SOCKS5, with the HTTP one being
+default. (Added in 7.10)
+.TP
+.B CURLOPT_HTTPPROXYTUNNEL
+Set the parameter to non-zero to get the library to tunnel all operations
+through a given HTTP proxy. Note that there is a big difference between using
+a proxy and to tunnel through it. If you don't know what this means, you
+probably don't want this tunneling option. (Added in 7.3)
+.TP
+.B CURLOPT_INTERFACE
+Pass a char * as parameter. This set the interface name to use as outgoing
+network interface. The name can be an interface name, an IP address or a host
+name. (Added in 7.3)
+.TP
+.B CURLOPT_DNS_CACHE_TIMEOUT
+Pass a long, this sets the timeout in seconds. Name resolves will be kept in
+memory for this number of seconds. Set to zero (0) to completely disable
+caching, or set to -1 to make the cached entries remain forever. By default,
+libcurl caches info for 60 seconds. (Added in 7.9.3)
+.TP
+.B CURLOPT_DNS_USE_GLOBAL_CACHE
+Pass a long. If the value is non-zero, it tells curl to use a global DNS cache
+that will survive between easy handle creations and deletions. This is not
+thread-safe and this will use a global varible. (Added in 7.9.3)
+.TP
+.B CURLOPT_BUFFERSIZE
+Pass a long specifying your prefered size for the receive buffer in libcurl.
+The main point of this would be that the write callback gets called more often
+and with smaller chunks. This is just treated as a request, not an order. You
+cannot be guaranteed to actually get the given size. (Added in 7.10)
+.PP
+.SH NAMES and PASSWORDS OPTIONS
+.TP 0.4i
+.B CURLOPT_NETRC
+This parameter controls the preference of libcurl between using user names and
+passwords from your \fI~/.netrc\fP file, relative to user names and passwords
+in the URL supplied with \fICURLOPT_URL\fP.
+
+\fBNote:\fP libcurl uses a user name (and supplied or prompted password)
+supplied with \fICURLOPT_USERPWD\fP in preference to any of the options
+controlled by this parameter.
+
+Pass a long, set to one of the values described below.
+.RS
+.TP 5
+.B CURL_NETRC_OPTIONAL
+The use of your \fI~/.netrc\fP file is optional,
+and information in the URL is to be preferred.  The file will be scanned
+with the host and user name (to find the password only) or with the host only,
+to find the first user name and password after that \fImachine\fP,
+which ever information is not specified in the URL.
+
+Undefined values of the option will have this effect.
+.TP     
+.B CURL_NETRC_IGNORED
+The library will ignore the file and use only the information in the URL.
+
+This is the default.
+.TP
+.B CURL_NETRC_REQUIRED
+This value tells the library that use of the file is required,
+to ignore the information in the URL,
+and to search the file with the host only.
+.RE
+.TP
+Only machine name, user name and password are taken into account 
+(init macros and similar things aren't supported).
+
+\fBNote:\fP libcurl does not verify that the file has the correct properties
+set (as the standard Unix ftp client does). It should only be readable by
+user.
+.TP
+.B CURLOPT_USERPWD
+Pass a char * as parameter, which should be [user name]:[password] to use for
+the connection. If the password is left out, you will be prompted for it.
+\fICURLOPT_PASSWDFUNCTION\fP can be used to set your own prompt function.
+.TP
+.B CURLOPT_PROXYUSERPWD
+Pass a char * as parameter, which should be [user name]:[password] to use for
+the connection to the HTTP proxy. If the password is left out, you will be
+prompted for it. \fICURLOPT_PASSWDFUNCTION\fP can be used to set your own
+prompt function.
+.PP
+.SH HTTP OPTIONS
+.TP 0.4i
+.B CURLOPT_FOLLOWLOCATION
+A non-zero parameter tells the library to follow any Location: header that the
+server sends as part of a HTTP header.
+
+\fBNOTE:\fP this means that the library will re-send the same request on the
+new location and follow new Location: headers all the way until no more such
+headers are returned. \fICURLOPT_MAXREDIRS\fP can be used to limit the number
+of redirects libcurl will follow.
+.TP
+.B CURLOPT_MAXREDIRS
+Pass a long. The set number will be the redirection limit. If that many
+redirections have been followed, the next redirect will cause an error
+(\fICURLE_TOO_MANY_REDIRECTS\fP). This option only makes sense if the
+\fICURLOPT_FOLLOWLOCATION\fP is used at the same time. (Added in 7.5)
+.TP
+.B CURLOPT_PUT
+A non-zero parameter tells the library to use HTTP PUT to transfer data. The
+data should be set with CURLOPT_READDATA and CURLOPT_INFILESIZE.
+.TP
+.B CURLOPT_POST
+A non-zero parameter tells the library to do a regular HTTP post. This is a
+normal application/x-www-form-urlencoded kind, which is the most commonly used
+one by HTML forms. See the CURLOPT_POSTFIELDS option for how to specify the
+data to post and CURLOPT_POSTFIELDSIZE in how to set the data size. Starting
+with libcurl 7.8, this option is obsolete. Using the CURLOPT_POSTFIELDS option
+will imply this option.
+.TP
+.B CURLOPT_POSTFIELDS
+Pass a char * as parameter, which should be the full data to post in a HTTP
+post operation. This is a normal application/x-www-form-urlencoded kind, which
+is the most commonly used one by HTML forms. See also the CURLOPT_POST. Since
+7.8, using CURLOPT_POSTFIELDS implies CURLOPT_POST.
+
+\fBNote:\fP to make multipart/formdata posts (aka rfc1867-posts), check out
+the \fICURLOPT_HTTPPOST\fP option.
+.TP
+.B CURLOPT_POSTFIELDSIZE
+If you want to post data to the server without letting libcurl do a strlen()
+to measure the data size, this option must be used. When this option is used
+you can post fully binary data, which otherwise is likely to fail. If this
+size is set to zero, the library will use strlen() to get the size. (Added in
+libcurl 7.2)
+.TP
+.B CURLOPT_HTTPPOST
+Tells libcurl you want a multipart/formdata HTTP POST to be made and you
+instruct what data to pass on to the server.  Pass a pointer to a linked list
+of HTTP post structs as parameter.  The linked list should be a fully valid
+list of 'struct HttpPost' structs properly filled in. The best and most
+elegant way to do this, is to use \fIcurl_formadd(3)\fP as documented. The
+data in this list must remain intact until you close this curl handle again
+with \fIcurl_easy_cleanup(3)\fP.
+.TP
+.B CURLOPT_REFERER
+Pass a pointer to a zero terminated string as parameter. It will be used to
+set the Referer: header in the http request sent to the remote server. This
+can be used to fool servers or scripts. You can also set any custom header
+with \fICURLOPT_HTTPHEADER\fP.
+.TP
+.B CURLOPT_USERAGENT
+Pass a pointer to a zero terminated string as parameter. It will be used to
+set the User-Agent: header in the http request sent to the remote server. This
+can be used to fool servers or scripts. You can also set any custom header
+with \fICURLOPT_HTTPHEADER\fP.
+.TP
+.B CURLOPT_HTTPHEADER
+Pass a pointer to a linked list of HTTP headers to pass to the server in your
+HTTP request. The linked list should be a fully valid list of \fBstruct
+curl_slist\fP structs properly filled in. Use \fIcurl_slist_append(3)\fP to
+create the list and \fIcurl_slist_free_all(3)\fP to clean up an entire
+list. If you add a header that is otherwise generated and used by libcurl
+internally, your added one will be used instead. If you add a header with no
+contents as in 'Accept:' (no data on the right side of the colon), the
+internally used header will get disabled. Thus, using this option you can add
+new headers, replace internal headers and remove internal headers.
+
+\fBNOTE:\fPThe most commonly replaced headers have "shortcuts" in the options
+CURLOPT_COOKIE, CURLOPT_USERAGENT and CURLOPT_REFERER.
+.TP
+.B CURLOPT_COOKIE
+Pass a pointer to a zero terminated string as parameter. It will be used to
+set a cookie in the http request. The format of the string should be
+NAME=CONTENTS, where NAME is the cookie name and CONTENTS is what the cookie
+should contain.
+
+If you need to set mulitple cookies, you need to set them all using a single
+option and thus you need to concat them all in one single string. Set multiple
+cookies in one string like this: "name1=content1; name2=content2;" etc.
+
+Using this option multiple times will only make the latest string override the
+previously ones.
+.TP
+.B CURLOPT_COOKIEFILE
+Pass a pointer to a zero terminated string as parameter. It should contain the
+name of your file holding cookie data to read. The cookie data may be in
+Netscape / Mozilla cookie data format or just regular HTTP-style headers
+dumped to a file.
+
+Given an empty or non-existing file, this option will enable cookies for this
+curl handle, making it understand and parse received cookies and then use
+matching cookies in future request.
+.TP
+.B CURLOPT_COOKIEJAR
+Pass a file name as char *, zero terminated. This will make libcurl write all
+internally known cookies to the specified file when \fIcurl_easy_cleanup(3)\fP
+is called. If no cookies are known, no file will be created. Specify "-" to
+instead have the cookies written to stdout. Using this option also enables
+cookies for this session, so if you for example follow a location it will make
+matching cookies get sent accordingly. (Added in 7.9)
+.TP
+.B CURLOPT_TIMECONDITION
+Pass a long as parameter. This defines how the CURLOPT_TIMEVALUE time value is
+treated. You can set this parameter to TIMECOND_IFMODSINCE or
+TIMECOND_IFUNMODSINCE. This is a HTTP-only feature. (TBD)
+.TP
+.B CURLOPT_TIMEVALUE
+Pass a long as parameter. This should be the time in seconds since 1 jan 1970,
+and the time will be used in a condition as specified with
+CURLOPT_TIMECONDITION.
+.TP
+.B CURLOPT_HTTPGET
+Pass a long. If the long is non-zero, this forces the HTTP request to get back
+to GET. Only really usable if POST, PUT or a custom request have been used
+previously using the same curl handle. (Added in 7.8.1)
+.TP
+.B CURLOPT_HTTP_VERSION
+Pass a long, set to one of the values described below. They force libcurl to
+use the specific HTTP versions. This is not sensible to do unless you have a
+good reason.
+.RS
+.TP 5
+.B CURL_HTTP_VERSION_NONE
+We don't care about what version the library uses. libcurl will use whatever
+it thinks fit.
+.TP
+.B CURL_HTTP_VERSION_1_0
+Enforce HTTP 1.0 requests.
+.TP
+.B CURL_HTTP_VERSION_1_1
+Enforce HTTP 1.1 requests.
+.RE
+.PP
+.SH FTP OPTIONS
+.TP 0.4i
+.B CURLOPT_FTPPORT
+Pass a pointer to a zero terminated string as parameter. It will be used to
+get the IP address to use for the ftp PORT instruction. The PORT instruction
+tells the remote server to connect to our specified IP address. The string may
+be a plain IP address, a host name, an network interface name (under Unix) or
+just a '-' letter to let the library use your systems default IP
+address. Default FTP operations are passive, and thus won't use PORT.
+.TP
+.B CURLOPT_QUOTE
+Pass a pointer to a linked list of FTP commands to pass to the server prior to
+your ftp request. This will be done before any other FTP commands are issued
+(even before the CWD command). The linked list should be a fully valid list of
+'struct curl_slist' structs properly filled in. Use \fIcurl_slist_append(3)\fP
+to append strings (commands) to the list, and clear the entire list afterwards
+with \fIcurl_slist_free_all(3)\fP. Disable this operation again by setting a
+NULL to this option.
+.TP
+.B CURLOPT_POSTQUOTE
+Pass a pointer to a linked list of FTP commands to pass to the server after
+your ftp transfer request. The linked list should be a fully valid list of
+struct curl_slist structs properly filled in as described for
+\fICURLOPT_QUOTE\fP. Disable this operation again by setting a NULL to this
+option.
+.TP
+.B CURLOPT_PREQUOTE
+Pass a pointer to a linked list of FTP commands to pass to the server after
+the transfer type is set. The linked list should be a fully valid list of
+struct curl_slist structs properly filled in as described for
+\fICURLOPT_QUOTE\fP. Disable this operation again by setting a NULL to this
+option.
+.TP
+.B CURLOPT_FTPLISTONLY
+A non-zero parameter tells the library to just list the names of an ftp
+directory, instead of doing a full directory listing that would include file
+sizes, dates etc.
+
+This causes an FTP NLST command to be sent.  Beware that some FTP servers list
+only files in their response to NLST; they might not include subdirectories
+and symbolic links.
+.TP
+.B CURLOPT_FTPAPPEND
+A non-zero parameter tells the library to append to the remote file instead of
+overwrite it. This is only useful when uploading to a ftp site.
+.TP
+.B CURLOPT_FTP_USE_EPSV
+Pass a long. If the value is non-zero, it tells curl to use the EPSV command
+when doing passive FTP downloads (which it always does by default). Using EPSV
+means that it will first attempt to use EPSV before using PASV, but if you
+pass FALSE (zero) to this option, it will not try using EPSV, only plain PASV.
+.PP
+.SH PROTOCOL OPTIONS
+.TP 0.4i
+.B CURLOPT_TRANSFERTEXT
+A non-zero parameter tells the library to use ASCII mode for ftp transfers,
+instead of the default binary transfer. For LDAP transfers it gets the data in
+plain text instead of HTML and for win32 systems it does not set the stdout to
+binary mode. This option can be usable when transferring text data between
+systems with different views on certain characters, such as newlines or
+similar.
+.TP
+.B CURLOPT_CRLF
+Convert Unix newlines to CRLF newlines on transfers.
+.TP
+.B CURLOPT_RANGE
+Pass a char * as parameter, which should contain the specified range you
+want. It should be in the format "X-Y", where X or Y may be left out. HTTP
+transfers also support several intervals, separated with commas as in
+\fI"X-Y,N-M"\fP. Using this kind of multiple intervals will cause the HTTP
+server to send the response document in pieces (using standard MIME separation
+techniques).
+.TP
+.B CURLOPT_RESUME_FROM
+Pass a long as parameter. It contains the offset in number of bytes that you
+want the transfer to start from.
+.TP
+.B CURLOPT_CUSTOMREQUEST
+Pass a pointer to a zero terminated string as parameter. It will be user
+instead of GET or HEAD when doing the HTTP request. This is useful for doing
+DELETE or other more or less obscure HTTP requests. Don't do this at will,
+make sure your server supports the command first.
+.TP
+.B CURLOPT_FILETIME
+Pass a long. If it is a non-zero value, libcurl will attempt to get the
+modification date of the remote document in this operation. This requires that
+the remote server sends the time or replies to a time querying command. The
+\fIcurl_easy_getinfo(3)\fP function with the \fICURLINFO_FILETIME\fP argument
+can be used after a transfer to extract the received time (if any). (Added in
+7.5)
+.TP
+.B CURLOPT_NOBODY
+A non-zero parameter tells the library to not include the body-part in the
+output. This is only relevant for protocols that have separate header and body
+parts.
+.TP
+.B CURLOPT_INFILESIZE
+When uploading a file to a remote site, this option should be used to tell
+libcurl what the expected size of the infile is.
+.TP
+.B CURLOPT_UPLOAD
+A non-zero parameter tells the library to prepare for an upload. The
+CURLOPT_READDATA and CURLOPT_INFILESIZE are also interesting for uploads.
+.PP
+.SH CONNECTION OPTIONS
+.TP 0.4i
+.B CURLOPT_TIMEOUT
+Pass a long as parameter containing the maximum time in seconds that you allow
+the libcurl transfer operation to take. Normally, name lookups can take a
+considerable time and limiting operations to less than a few minutes risk
+aborting perfectly normal operations. This option will cause curl to use the
+SIGALRM to enable time-outing system calls.
+
+\fBNOTE:\fP this is not recommended to use in unix multi-threaded programs, as
+it uses signals unless CURLOPT_NOSIGNAL (see below) is set.
+.TP
+.B CURLOPT_LOW_SPEED_LIMIT
+Pass a long as parameter. It contains the transfer speed in bytes per second
+that the transfer should be below during CURLOPT_LOW_SPEED_TIME seconds for
+the library to consider it too slow and abort.
+.TP
+.B CURLOPT_LOW_SPEED_TIME
+Pass a long as parameter. It contains the time in seconds that the transfer
+should be below the CURLOPT_LOW_SPEED_LIMIT for the library to consider it too
+slow and abort.
+.TP
+.B CURLOPT_MAXCONNECTS
+Pass a long. The set number will be the persistent connection cache size. The
+set amount will be the maximum amount of simultaneously open connections that
+libcurl may cache. Default is 5, and there isn't much point in changing this
+value unless you are perfectly aware of how this work and changes libcurl's
+behaviour. This concerns connection using any of the protocols that support
+persistent connections.
+
+When reaching the maximum limit, curl uses the \fICURLOPT_CLOSEPOLICY\fP to
+figure out which of the existing connections to close to prevent the number of
+open connections to increase.
+
+\fBNOTE:\fP if you already have performed transfers with this curl handle,
+setting a smaller MAXCONNECTS than before may cause open connections to get
+closed unnecessarily. (Added in 7.7)
+.TP
+.B CURLOPT_CLOSEPOLICY
+Pass a long. This option sets what policy libcurl should use when the
+connection cache is filled and one of the open connections has to be closed to
+make room for a new connection. This must be one of the CURLCLOSEPOLICY_*
+defines. Use \fICURLCLOSEPOLICY_LEAST_RECENTLY_USED\fP to make libcurl close
+the connection that was least recently used, that connection is also least
+likely to be capable of re-use. Use \fICURLCLOSEPOLICY_OLDEST\fP to make
+libcurl close the oldest connection, the one that was created first among the
+ones in the connection cache. The other close policies are not support
+yet. (Added in 7.7)
+.TP
+.B CURLOPT_FRESH_CONNECT
+Pass a long. Set to non-zero to make the next transfer use a new (fresh)
+connection by force. If the connection cache is full before this connection,
+one of the existing connections will be closed as according to the selected or
+default policy. This option should be used with caution and only if you
+understand what it does. Set this to 0 to have libcurl attempt re-using an
+existing connection (default behavior).  (Added in 7.7)
+.TP
+.B CURLOPT_FORBID_REUSE
+Pass a long. Set to non-zero to make the next transfer explicitly close the
+connection when done. Normally, libcurl keep all connections alive when done
+with one transfer in case there comes a succeeding one that can re-use them.
+This option should be used with caution and only if you understand what it
+does. Set to 0 to have libcurl keep the connection open for possibly later
+re-use (default behavior). (Added in 7.7)
+.TP
+.B CURLOPT_CONNECTTIMEOUT
+Pass a long. It should contain the maximum time in seconds that you allow the
+connection to the server to take.  This only limits the connection phase, once
+it has connected, this option is of no more use. Set to zero to disable
+connection timeout (it will then only timeout on the system's internal
+timeouts). See also the \fICURLOPT_TIMEOUT\fP option.
+
+\fBNOTE:\fP this is not recommended to use in unix multi-threaded programs, as
+it uses signals unless CURLOPT_NOSIGNAL (see below) is set.
+.PP
+.SH SSL and SECURITY OPTIONS
+.TP 0.4i
+.B CURLOPT_SSLCERT
+Pass a pointer to a zero terminated string as parameter. The string should be
+the file name of your certificate. The default format is "PEM" and can be
+changed with \fICURLOPT_SSLCERTTYPE\fP.
+.TP
+.B CURLOPT_SSLCERTTYPE
+Pass a pointer to a zero terminated string as parameter. The string should be
+the format of your certificate. Supported formats are "PEM" and "DER".  (Added
+in 7.9.3)
+.TP
+.B CURLOPT_SSLCERTPASSWD
+Pass a pointer to a zero terminated string as parameter. It will be used as
+the password required to use the CURLOPT_SSLCERT certificate. If the password
+is not supplied, you will be prompted for it. \fICURLOPT_PASSWDFUNCTION\fP can
+be used to set your own prompt function.
+
+\fBNOTE:\fPThis option is replaced by \fICURLOPT_SSLKEYPASSWD\fP and only
+cept for backward compatibility. You never needed a pass phrase to load
+a certificate but you need one to load your private key.
+.TP
+.B CURLOPT_SSLKEY
+Pass a pointer to a zero terminated string as parameter. The string should be
+the file name of your private key. The default format is "PEM" and can be
+changed with \fICURLOPT_SSLKEYTYPE\fP. (Added in 7.9.3)
+.TP
+.B CURLOPT_SSLKEYTYPE
+Pass a pointer to a zero terminated string as parameter. The string should be
+the format of your private key. Supported formats are "PEM", "DER" and "ENG".
+(Added in 7.9.3)
+
+\fBNOTE:\fPThe format "ENG" enables you to load the private key from a crypto
+engine. in this case \fICURLOPT_SSLKEY\fP is used as an identifier passed to
+the engine. You have to set the crypto engine with \fICURLOPT_SSL_ENGINE\fP.
+.TP
+.B CURLOPT_SSLKEYPASSWD
+Pass a pointer to a zero terminated string as parameter. It will be used as
+the password required to use the \fICURLOPT_SSLKEY\fP private key. If the
+password is not supplied, you will be prompted for
+it. \fICURLOPT_PASSWDFUNCTION\fP can be used to set your own prompt function.
+(Added in 7.9.3)
+.TP
+.B CURLOPT_SSL_ENGINE
+Pass a pointer to a zero terminated string as parameter. It will be used as
+the identifier for the crypto engine you want to use for your private
+key. (Added in 7.9.3)
+
+\fBNOTE:\fPIf the crypto device cannot be loaded,
+\fICURLE_SSL_ENGINE_NOTFOUND\fP is returned.
+.TP
+.B CURLOPT_SSL_ENGINEDEFAULT
+Sets the actual crypto engine as the default for (asymetric) crypto
+operations. (Added in 7.9.3)
+
+\fBNOTE:\fPIf the crypto device cannot be set,
+\fICURLE_SSL_ENGINE_SETFAILED\fP is returned.
+.TP
+.B CURLOPT_SSLVERSION
+Pass a long as parameter. Set what version of SSL to attempt to use, 2 or
+3. By default, the SSL library will try to solve this by itself although some
+servers make this difficult why you at times may have to use this option.
+.TP
+.B CURLOPT_SSL_VERIFYPEER
+Pass a long that is set to a non-zero value to make curl verify the peer's
+certificate. The certificate to verify against must be specified with the
+CURLOPT_CAINFO option (Added in 7.4.2) or a certificate directory must be specified
+with the CURLOPT_CAPATH option (Added in 7.9.8).
+.TP
+.B CURLOPT_CAINFO
+Pass a char * to a zero terminated string naming a file holding one or more
+certificates to verify the peer with. This only makes sense when used in
+combination with the CURLOPT_SSL_VERIFYPEER option. (Added in 7.4.2)
+.TP
+.B CURLOPT_CAPATH
+Pass a char * to a zero terminated string naming a directory holding multiple
+CA certificates to verify the peer with. The certificate directory must be
+prepared using the openssl c_rehash utility. This only makes sense when used
+in combination with the CURLOPT_SSL_VERIFYPEER option. The CAPATH function
+apparently does not work in Windows due to some limitation in openssl. (Added
+in 7.9.8)
+.TP
+.B CURLOPT_RANDOM_FILE
+Pass a char * to a zero terminated file name. The file will be used to read
+from to seed the random engine for SSL. The more random the specified file is,
+the more secure the SSL connection will become.
+.TP
+.B CURLOPT_EGDSOCKET
+Pass a char * to the zero terminated path name to the Entropy Gathering Daemon
+socket. It will be used to seed the random engine for SSL.
+.TP
+.B CURLOPT_SSL_VERIFYHOST
+Pass a long. Set if we should verify the Common name from the peer certificate
+in the SSL handshake, set 1 to check existence, 2 to ensure that it matches
+the provided hostname. (Added in 7.8.1)
+.TP
+.B CURLOPT_SSL_CIPHER_LIST
+Pass a char *, pointing to a zero terminated string holding the list of
+ciphers to use for the SSL connection. The list must be syntactly correct, it
+consists of one or more cipher strings separated by colons. Commas or spaces
+are also acceptable separators but colons are normally used, \!, \- and \+ can
+be used as operators. Valid examples of cipher lists include 'RC4-SHA',
+\'SHA1+DES\', 'TLSv1' and 'DEFAULT'. The default list is normally set when you
+compile OpenSSL.
+
+You'll find more details about cipher lists on this URL:
+\fIhttp://www.openssl.org/docs/apps/ciphers.html\fP
+.TP
+.B CURLOPT_KRB4LEVEL
+Pass a char * as parameter. Set the krb4 security level, this also enables
+krb4 awareness.  This is a string, 'clear', 'safe', 'confidential' or
+\&'private'.  If the string is set but doesn't match one of these, 'private'
+will be used. Set the string to NULL to disable kerberos4. The kerberos
+support only works for FTP. (Added in 7.3)
+.PP
+.SH RETURN VALUE
+CURLE_OK (zero) means that the option was set properly, non-zero means an
+error occurred as \fI<curl/curl.h>\fP defines. See the \fIlibcurl-errors.3\fP
+man page for the full list with descriptions.
+.SH "SEE ALSO"
+.BR curl_easy_init "(3), " curl_easy_cleanup "(3), "
+.SH BUGS
+If you find any bugs, or just have questions, subscribe to one of the mailing
+lists and post. We won't bite.
+
--- a/docs/libcurl/curl_escape.3
+++ b/docs/libcurl/curl_escape.3
@@ -1,28 +1,26 @@
-.\" You can view this file with:
-.\" nroff -man [file]
-.\" $Id$
-.\"
-.TH curl_escape 3 "22 March 2001" "libcurl 7.7" "libcurl Manual"
-.SH NAME
-curl_escape - URL encodes the given string
-.SH SYNOPSIS
-.B #include <curl/curl.h>
-.sp
-.BI "char *curl_escape( char *" url ", int "length " );"
-.ad
-.SH DESCRIPTION
-This function will convert the given input string to an URL encoded string and
-return that as a new allocated string. All input characters that are not a-z,
-A-Z or 0-9 will be converted to their "URL escaped" version. If a sequence of
-%NN (where NN is a two-digit hexadecimal number) is found in the string to
-encode, that 3-letter combination will be copied to the output unmodifed,
-assuming that it is an already encoded piece of data.
-
-If the 'length' argument is set to 0, curl_escape() will use strlen() on the
-input 'url' string to find out the size.
-
-You must free() the returned string when you're done with it.
-.SH RETURN VALUE
-A pointer to a zero terminated string or NULL if it failed.
-.SH "SEE ALSO"
-.I curl_unescape(), RFC 2396
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_escape 3 "6 March 2002" "libcurl 7.9" "libcurl Manual"
+.SH NAME
+curl_escape - URL encodes the given string
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "char *curl_escape( char *" url ", int "length " );"
+.ad
+.SH DESCRIPTION
+This function will convert the given input string to an URL encoded string and
+return that as a new allocated string. All input characters that are not a-z,
+A-Z or 0-9 will be converted to their "URL escaped" version (%NN where NN is a
+two-digit hexadecimal number).
+
+If the 'length' argument is set to 0, curl_escape() will use strlen() on the
+input 'url' string to find out the size.
+
+You must curl_free() the returned string when you're done with it.
+.SH RETURN VALUE
+A pointer to a zero terminated string or NULL if it failed.
+.SH "SEE ALSO"
+.I curl_unescape(), curl_free(), RFC 2396
--- a/docs/libcurl/curl_formadd.3
+++ b/docs/libcurl/curl_formadd.3
@@ -0,0 +1,186 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_formadd 3 "24 June 2002" "libcurl 7.9.8" "libcurl Manual"
+.SH NAME
+curl_formadd - add a section to a multipart/formdata HTTP POST
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURLFORMcode curl_formadd(struct HttpPost ** " firstitem,
+.BI "struct HttpPost ** " lastitem, " ...);"
+.ad
+.SH DESCRIPTION
+curl_formadd() is used to append sections when building a multipart/formdata
+HTTP POST (sometimes refered to as rfc1867-style posts). Append one section at
+a time until you've added all the sections you want included and then you pass
+the \fIfirstitem\fP pointer as parameter to \fBCURLOPT_HTTPPOST\fP.
+\fIlastitem\fP is set after each call and on repeated invokes it should be
+left as set to allow repeated invokes to find the end of the list faster.
+
+After the \fIlastitem\fP pointer follow the real arguments. (If the following
+description confuses you, jump directly to the examples):
+
+\fBCURLFORM_COPYNAME\fP or \fBCURLFORM_PTRNAME\fP followed by a string is used
+for the name of the section. Optionally one may use \fBCURLFORM_NAMELENGTH\fP
+to specify the length of the name (allowing null characters within the
+name). All options that use the word COPY in their names copy the given
+contents, while the ones with PTR in their names simply points to the (static)
+data you must make sure remain until curl no longer needs it.
+
+The options for providing values are: \fBCURLFORM_COPYCONTENTS\fP,
+\fBCURLFORM_PTRCONTENTS\fP, \fBCURLFORM_FILE\fP, \fBCURLFORM_BUFFER\fP,
+or \fBCURLFORM_FILECONTENT\fP followed by a char or void pointer
+(allowed for PTRCONTENTS).
+
+\fBCURLFORM_FILECONTENT\fP does a normal post like \fBCURLFORM_COPYCONTENTS\fP
+but the actual value is read from the filename given as a string.
+
+Other arguments may be \fBCURLFORM_CONTENTTYPE\fP if the user wishes to
+specify one (for FILE if no type is given the library tries to provide the
+correct one; for CONTENTS no Content-Type is sent in this case).
+
+For \fBCURLFORM_PTRCONTENTS\fP or \fBCURLFORM_COPYNAME\fP the user may also
+add \fBCURLFORM_CONTENTSLENGTH\fP followed by the length as a long (if not
+given the library will use strlen to determine the length).
+
+For \fBCURLFORM_FILE\fP the user may send multiple files in one section by
+providing multiple \fBCURLFORM_FILE\fP arguments each followed by the filename
+(and each FILE is allowed to have a CONTENTTYPE).
+
+\fBCURLFORM_BUFFER\fP 
+tells libcurl that a buffer is to be used to upload data instead of using a
+file. The value of the next parameter is used as the value of the "filename"
+parameter in the content header.
+
+\fBCURLFORM_BUFFERPTR\fP
+tells libcurl that the address of the next parameter is a pointer to the buffer
+containing data to upload. The buffer containing this data must not be freed
+until after curl_easy_cleanup is called.
+
+\fBCURLFORM_BUFFERLENGTH\fP
+tells libcurl that the length of the buffer to upload is the value of the
+next parameter.
+
+Another possibility to send options to curl_formadd() is the
+\fBCURLFORM_ARRAY\fP option, that passes a struct curl_forms array pointer as
+its value. Each curl_forms structure element has a CURLformoption and a char
+pointer. The final element in the array must be a CURLFORM_END. All available
+options can be used in an array, except the CURLFORM_ARRAY option itself!
+
+Should you need to specify extra headers for the form POST section, use
+\fBCURLFORM_CONTENTHEADER\fP. This takes a curl_slist prepared in the usual way
+using \fBcurl_slist_append\fP and appends the list of headers to those Curl
+automatically generates for \fBCURLFORM_CONTENTTYPE\fP and the content 
+disposition. The list must exist while the POST occurs, if you free it before
+the post completes you may experience problems.
+
+The last argument in such an array must always be \fBCURLFORM_END\fP.
+
+The pointers \fI*firstitem\fP and \fI*lastitem\fP should both be pointing to
+NULL in the first call to this function. All list-data will be allocated by
+the function itself. You must call \fIcurl_formfree\fP after the form post has
+been done to free the resources again.
+
+This function will copy all input data except the data pointed to by the
+arguments after \fBCURLFORM_PTRNAME\fP and \fBCURLFORM_PTRCONTENTS\fP and keep
+its own version of it allocated until you call \fIcurl_formfree\fP. When
+you've passed the pointer to \fIcurl_easy_setopt\fP, you must not free the
+list until after you've called \fIcurl_easy_cleanup\fP for the curl handle. If
+you provide a pointer as an arguments after \fBCURLFORM_PTRNAME\fP or
+\fBCURLFORM_PTRCONTENTS\fP you must ensure that the pointer stays valid until
+you call \fIcurl_form_free\fP and \fIcurl_easy_cleanup\fP.
+
+See example below.
+.SH RETURN VALUE
+0 means everything was ok, non-zero means an error occurred as
+.I <curl/curl.h>
+defines.
+.SH EXAMPLE
+.nf
+
+ struct HttpPost* post = NULL;
+ struct HttpPost* last = NULL;
+ char namebuffer[] = "name buffer";
+ long namelength = strlen(namebuffer);
+ char buffer[] = "test buffer";
+ char htmlbuffer[] = "<HTML>test buffer</HTML>";
+ long htmlbufferlength = strlen(htmlbuffer);
+ struct curl_forms forms[3];
+ char file1[] = "my-face.jpg";
+ char file2[] = "your-face.jpg";
+ /* add null character into htmlbuffer, to demonstrate that
+    transfers of buffers containing null characters actually work
+ */
+ htmlbuffer[8] = '\\0';
+
+ /* Add simple name/content section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "name",
+              CURLFORM_COPYCONTENTS, "content", CURLFORM_END); 
+
+ /* Add simple name/content/contenttype section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "htmlcode",
+              CURLFORM_COPYCONTENTS, "<HTML></HTML>",
+              CURLFORM_CONTENTTYPE, "text/html", CURLFORM_END);
+
+ /* Add name/ptrcontent section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "name_for_ptrcontent",
+              CURLFORM_PTRCONTENTS, buffer, CURLFORM_END);
+
+ /* Add ptrname/ptrcontent section */
+ curl_formadd(&post, &last, CURLFORM_PTRNAME, namebuffer,
+	      CURLFORM_PTRCONTENTS, buffer, CURLFORM_NAMELENGTH,
+	      namelength, CURLFORM_END);
+
+ /* Add name/ptrcontent/contenttype section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "html_code_with_hole",
+              CURLFORM_PTRCONTENTS, htmlbuffer,
+              CURLFORM_CONTENTSLENGTH, htmlbufferlength,
+              CURLFORM_CONTENTTYPE, "text/html", CURLFORM_END);
+
+ /* Add simple file section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "picture",
+              CURLFORM_FILE, "my-face.jpg", CURLFORM_END);
+
+ /* Add file/contenttype section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "picture",
+              CURLFORM_FILE, "my-face.jpg",
+              CURLFORM_CONTENTTYPE, "image/jpeg", CURLFORM_END);
+
+ /* Add two file section */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "pictures",
+              CURLFORM_FILE, "my-face.jpg",
+              CURLFORM_FILE, "your-face.jpg", CURLFORM_END);
+
+ /* Add two file section using CURLFORM_ARRAY */
+ forms[0].option = CURLFORM_FILE;
+ forms[0].value  = file1;
+ forms[1].option = CURLFORM_FILE;
+ forms[1].value  = file2;
+ forms[2].option  = CURLFORM_END;
+
+ /* Add a buffer to upload */
+ curl_formadd(&post, &last,
+              CURLFORM_COPYNAME, "name",
+              CURLFORM_BUFFER, "data",
+              CURLFORM_BUFFERPTR, record,
+              CURLFORM_BUFFERLENGTH, record_length,
+              CURLFORM_END);
+
+ /* no option needed for the end marker */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "pictures",
+              CURLFORM_ARRAY, forms, CURLFORM_END);
+ /* Add the content of a file as a normal post text value */
+ curl_formadd(&post, &last, CURLFORM_COPYNAME, "filecontent",
+              CURLFORM_FILECONTENT, ".bashrc", CURLFORM_END);
+ /* Set the form info */
+ curl_easy_setopt(curl, CURLOPT_HTTPPOST, post);
+
+.SH "SEE ALSO"
+.BR curl_easy_setopt "(3), "
+.BR curl_formparse "(3) [deprecated], "
+.BR curl_formfree "(3)"
+.SH BUGS
+Surely there are some, you tell me!
+
--- a/docs/libcurl/curl_formfree.3
+++ b/docs/libcurl/curl_formfree.3
@@ -12,12 +12,14 @@ curl_formfree - free a previously build multipart/formdata HTTP POST chain
 .ad
 .SH DESCRIPTION
 curl_formfree() is used to clean up data previously built/appended with
-curl_formparse(). This must be called when the data has been used, which
-typically means after the curl_easy_perform() has been called.
+curl_formadd()/curl_formparse(). This must be called when the data has
+been used, which typically means after the curl_easy_perform() has
+been called.
 .SH RETURN VALUE
 None
 .SH "SEE ALSO"
-.BR curl_formparse "(3) "
+.BR curl_formparse "(3) [deprecated], "
+.BR curl_formadd "(3) "
 .SH BUGS
 libcurl 7.7.1 and earlier versions does not allow a NULL pointer to be used as
 argument.
--- a/docs/libcurl/curl_formparse.3
+++ b/docs/libcurl/curl_formparse.3
@@ -0,0 +1,18 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id$
+.\"
+.TH curl_formparse 3 "17 Dec 2001" "libcurl 7.9.2" "libcurl Manual"
+.SH NAME
+curl_formparse - add a section to a multipart/formdata HTTP POST:
+deprecated (use curl_formadd instead)
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURLcode curl_formparse(char * " string, " struct HttpPost ** " firstitem,
+.BI "struct HttpPost ** " lastitem ");"
+.ad
+.SH DESCRIPTION
+This has been removed deliberately. The \fBcurl_formadd\fP has been introduced
+to replace this function. Do not use this. Convert to the new function
+now. curl_formparse() will be removed from a future version of libcurl.
--- a/docs/libcurl/curl_free.3
+++ b/docs/libcurl/curl_free.3
@@ -0,0 +1,17 @@
+.\" You can view this file with:
+.\" nroff -man [file]
+.\" $Id: 
+.\"
+.TH curl_free 3 "24 Sept 2002" "libcurl 7.10" "libcurl Manual"
+.SH NAME
+curl_free - reclaim memory that has been obtained through a libcurl call
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "void *curl_free( char *" ptr " );"
+.ad
+.SH DESCRIPTION
+curl_free reclaims memory that has been obtained through a libcurl call. 
+Use curl_free() instead of free() to avoid anomalies that can result from differences in memory management between your application and libcurl.
+.SH "SEE ALSO"
+.I curl_unescape(), curl_free()
--- a/docs/libcurl/curl_getdate.3
+++ b/docs/libcurl/curl_getdate.3
--- a/docs/libcurl/curl_getenv.3
+++ b/docs/libcurl/curl_getenv.3
@@ -2,13 +2,13 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_getenv 3 "5 March 2001" "libcurl 7.0" "libcurl Manual"
+.TH curl_getenv 3 "15 August 2001" "libcurl 7.8.1" "libcurl Manual"
 .SH NAME
 curl_getenv - return value for environment name
 .SH SYNOPSIS
 .B #include <curl/curl.h>
 .sp
-.BI "char *curl_getenv(char *" name ");
+.BI "char *curl_getenv(const char *" name ");
 .ad
 .SH DESCRIPTION
 curl_getenv() is a portable wrapper for the getenv() function, meant to
--- a/docs/libcurl/curl_global_cleanup.3
+++ b/docs/libcurl/curl_global_cleanup.3
--- a/docs/libcurl/curl_global_init.3
+++ b/docs/libcurl/curl_global_init.3
@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_global_init 3 "31 May 2001" "libcurl 7.8" "libcurl Manual"
+.TH curl_global_init 3 "13 Nov 2001" "libcurl 7.9.1" "libcurl Manual"
 .SH NAME
 curl_global_init - Global libcurl initialisation
 .SH SYNOPSIS
@@ -11,8 +11,8 @@ curl_global_init - Global libcurl initialisation
 .BI "CURLcode curl_global_init(long " flags ");"
 .ad
 .SH DESCRIPTION
-This function should be called once (no matter how many threads or libcurl
-sessions that'll be used) by every application that uses libcurl.
+This function should only be called once (no matter how many threads or
+libcurl sessions that'll be used) by every application that uses libcurl.

 If this function hasn't been invoked when \fIcurl_easy_init\fP is called, it
 will be done automatically by libcurl.
@@ -23,14 +23,19 @@ init, as described below. Set the desired bits by ORing the values together.
 You must however \fBalways\fP use the \fIcurl_global_cleanup\fP function, as
 that cannot be called automatically for you by libcurl.

+Calling this function more than once will cause unpredictable results.
+
 This function was added in libcurl 7.8.
 .SH FLAGS
 .TP 5
 .B CURL_GLOBAL_ALL
-Initialise everyting possible. This sets all known bits.
+Initialize everything possible. This sets all known bits.
 .TP
 .B CURL_GLOBAL_SSL
-Initialise SSL
+Initialize SSL
+.TP
+.B CURL_GLOBAL_WIN32
+Initialize the Win32 socket libraries. (added in libcurl 7.8.1)
 .TP
 .B CURL_GLOBAL_NOTHING
 Initialise nothing extra. This sets no bit.
--- a/docs/libcurl/curl_mprintf.3
+++ b/docs/libcurl/curl_mprintf.3
--- a/docs/libcurl/curl_multi_add_handle.3
+++ b/docs/libcurl/curl_multi_add_handle.3
@@ -0,0 +1,20 @@
+.\" $Id$
+.\"
+.TH curl_multi_add_handle 3 "4 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_add_handle - add an easy handle to a multi session
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_add_handle(CURLM *multi_handle, CURL *easy_handle);
+.ad
+.SH DESCRIPTION
+Adds a standard easy handle to the multi stack. This will make this multi
+handle control the specified easy handle.
+
+When an easy handle has been added to a multi stack, you can not and you must
+not use curl_easy_perform() on that handle!
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"
--- a/docs/libcurl/curl_multi_cleanup.3
+++ b/docs/libcurl/curl_multi_cleanup.3
@@ -0,0 +1,18 @@
+.\" $Id$
+.\"
+.TH curl_multi_cleanup 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_cleanup - close down a multi session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURLMcode curl_multi_cleanup( CURLM *multi_handle );"
+.ad
+.SH DESCRIPTION
+Cleans up and removes a whole multi stack. It does not free or touch any
+individual easy handles in any way - they still need to be closed
+individually, using the usual curl_easy_cleanup() way.
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_init "(3)," curl_easy_cleanup "(3)," curl_easy_init "(3)"
--- a/docs/libcurl/curl_multi_fdset.3
+++ b/docs/libcurl/curl_multi_fdset.3
@@ -0,0 +1,27 @@
+.\" $Id$
+.\"
+.TH curl_multi_fdset 3 "3 May 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_fdset - add an easy handle to a multi session
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_fdset(CURLM *multi_handle,
+                           fd_set *read_fd_set,
+                           fd_set *write_fd_set,
+                           fd_set *exc_fd_set,
+                           int *max_fd);
+.ad
+.SH DESCRIPTION
+This function extracts file descriptor information from a given multi_handle.
+libcurl returns its fd_set sets. The application can use these to select() or
+poll() on. The curl_multi_perform() function should be called as soon as one
+of them are ready to be read from or written to.
+
+NOTE that once this call is made, you must not remove the sets you point to,
+as libcurl will need to be able to read them. It needs them after select()
+calls, to know if certain sockets are readable or writable.
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"
--- a/docs/libcurl/curl_multi_info_read.3
+++ b/docs/libcurl/curl_multi_info_read.3
@@ -0,0 +1,35 @@
+.\" $Id$
+.\"
+.TH curl_multi_info_read 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_info_read - read multi stack informationals
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMsg *curl_multi_info_read( CURLM *multi_handle,
+                               int *msgs_in_queue);
+.ad
+.SH DESCRIPTION
+Ask the multi handle if there's any messages/informationals from the
+individual transfers. Messages include informationals such as an error code
+from the transfer or just the fact that a transfer is completed. More details
+on these should be written down as well.
+
+Repeated calls to this function will return a new struct each time, until a
+special "end of msgs" struct is returned as a signal that there is no more to
+get at this point. The integer pointed to with \fImsgs_in_queue\fP will
+contain the number of remaining messages after this function was called.
+
+The data the returned pointer points to will not survive calling
+curl_multi_cleanup().
+
+The 'CURLMsg' struct is very simple and only contain very basic informations.
+If more involved information is wanted, the particular "easy handle" in
+present in that struct and can thus be used in subsequent regular
+curl_easy_getinfo() calls (or similar).
+.SH "RETURN VALUE"
+A pointer to a filled-in struct, or NULL if it failed or ran out of
+structs. It also writes the number of messages left in the queue (after this
+read) in the integer the second argument points to.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)," curl_multi_perform "(3)"
--- a/docs/libcurl/curl_multi_init.3
+++ b/docs/libcurl/curl_multi_init.3
@@ -0,0 +1,22 @@
+.\" $Id$
+.\"
+.TH curl_multi_init 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_init - Start a multi session
+.SH SYNOPSIS
+.B #include <curl/curl.h>
+.sp
+.BI "CURLM *curl_multi_init( );"
+.ad
+.SH DESCRIPTION
+This function returns a CURLM handle to be used as input to all the other
+multi-functions, sometimes refered to as a multi handle on some places in the
+documentation. This init call MUST have a corresponding call to
+\fIcurl_multi_cleanup\fP when the operation is complete.
+.SH RETURN VALUE
+If this function returns NULL, something went wrong and you cannot use the
+other curl functions.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_global_init "(3)," curl_easy_init "(3)"
+.SH BUGS
+Surely there are some, you tell me!
--- a/docs/libcurl/curl_multi_perform.3
+++ b/docs/libcurl/curl_multi_perform.3
@@ -0,0 +1,30 @@
+.\" $Id$
+.\"
+.TH curl_multi_perform 3 "1 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_perform - add an easy handle to a multi session
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles);
+.ad
+.SH DESCRIPTION
+When the app thinks there's data available for the multi_handle, it should
+call this function to read/write whatever there is to read or write right
+now. curl_multi_perform() returns as soon as the reads/writes are done. This
+function does not require that there actually is any data available for
+reading or that data can be written, it can be called just in case. It will
+write the number of handles that still transfer data in the second argument's
+integer-pointer.
+.SH "RETURN VALUE"
+CURLMcode type, general libcurl multi interface error code.
+
+NOTE that this only returns errors etc regarding the whole multi stack. There
+might still have occurred problems on invidual transfers even when this
+function returns OK.
+.SH "TYPICAL USAGE"
+Most application will use \fIcurl_multi_fdset\fP to get the multi_handle's
+file descriptors, then it'll wait for action on them using select() and as
+soon as one or more of them are ready, \fIcurl_multi_perform\fP gets called.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"
--- a/docs/libcurl/curl_multi_remove_handle.3
+++ b/docs/libcurl/curl_multi_remove_handle.3
@@ -0,0 +1,20 @@
+.\" $Id$
+.\"
+.TH curl_multi_remove_handle 3 "6 March 2002" "libcurl 7.9.5" "libcurl Manual"
+.SH NAME
+curl_multi_remove_handle - add an easy handle to a multi session
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLMcode curl_multi_remove_handle(CURLM *multi_handle, CURL *easy_handle);
+.ad
+.SH DESCRIPTION
+Removes a given easy_handle from the multi_handle. This will make the
+specified easy handle be removed from this multi handle's control.
+
+When the easy handle has been removed from a multi stack, it is again
+perfectly legal to invoke \fIcurl_easy_perform()\fP on this easy handle.
+.SH RETURN VALUE
+CURLMcode type, general libcurl multi interface error code.
+.SH "SEE ALSO"
+.BR curl_multi_cleanup "(3)," curl_multi_init "(3)"
--- a/docs/libcurl/curl_slist_append.3
+++ b/docs/libcurl/curl_slist_append.3
@@ -8,7 +8,7 @@ curl_slist_append - add a string to an slist
 .SH SYNOPSIS
 .B #include <curl/curl.h>
 .sp
-.BI "struct curl_slist *curl_slist_append(struct curl_slit *" list,
+.BI "struct curl_slist *curl_slist_append(struct curl_slist *" list,
 .BI "const char * "string ");"
 .ad
 .SH DESCRIPTION
--- a/docs/libcurl/curl_slist_free_all.3
+++ b/docs/libcurl/curl_slist_free_all.3
--- a/docs/libcurl/curl_strequal.3
+++ b/docs/libcurl/curl_strequal.3
@@ -25,6 +25,6 @@ These functions are provided by libcurl to enable applications to compare
 strings in a truly portable manner. There are no standard portable case
 insensitive string comparison functions. These two works on all platforms.
 .SH RETURN VALUE
-A pointer to a zero terminated string.
+Non-zero if the strings are identical. Zero if they're not.
 .SH "SEE ALSO"
 .BR strcmp "(3), " strcasecmp "(3)"
--- a/Show More
+++ b/Show More