Due to the result code being reset to CURLE_OK when smtp_dophase_done()
was called, postdata would incorrectly be sent to the server when the
MAIL FROM or RCPT command was rejected.
As such, libcurl would return the wrong result code from performing the
operation and additionally set CURLINFO_RESPONSE_CODE to be that
returned by the postdata command.
Bug: http://curl.haxx.se/mail/lib-2012-05/0108.html
Reported by: Gokhan Sengun
In nettle/md5.h, md5_init and md5_update are defined as macros to
nettle_md5_init and nettle_md5_update respectively. This causes
error when using MD5_params.md5_init and md5_update. This patch
renames these members as md5_init_func and md5_update_func to
avoid name conflict. For completeness, MD5_params.md5_final was
also renamed as md5_final_func.
The changes in curl_ntlm_core.c is conversion error and fixed by
casting to proper type.
The curl-config command must be used twice in the single command line to
work properly in some environments.
Bug: http://curl.haxx.se/bug/view.cgi?id=3528241
Reported by: Julian Taylor
A dot character at the beginning of a line would not be escaped to a
double dot as required by RFC-2821, instead it would be deleted by the
mail server. Please see section 4.5.2 of the RFC for more information.
Note: This fix also simplifies the detection of repeated CRLF.CRLF
combinations, such as CRLF.CRLF.CRLF, a little rather than having to
advance the eob counter to 2.
It checks whether versioned symbols should be enabled before checking
whether it is possible (i.e. the linker supports --version-script) or
not. This avoids a useless warning when building cURL on a platform that
does not use GNU ld.
Moreover, it fixes broken indentation of this chunk of code.
Roman Mamedov spotted (in
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670126) that curl would
not complain when given a URL with an IPv6 numerical address without
brackets. It would simply cut off the last ":[hex]" part and thus not
work correctly.
That's a URL using an illegal syntax and now libcurl will instead return
a clear error code and error message detailing the error.
The above mentioned bug report claims this to be a regression but
libcurl does not guarantee functionality when given URLs that aren't
following the URL spec (RFC3986 mostly). I consider the fact that it
used to handle this differently a mere coincidence.
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the
size of the POST was zero length, it made libcurl first send a zero
chunk and then the terminating one. This could confuse a receiver and it
should rather just send the terminating chunk as it does with this fix.
Test case 1333 is added to verify.
Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html
Reported by: Arnaud Compan
Commit 9109cdec11 brought this regression (shipped since 7.24.0).
The singleipconnect() function must not return an error if Curl_socket()
returns an error. It should then simply return OK and pass a SOCKET_BAD
back simply because that is how the user of this function expects it to
work and something else is not fine.
Reported by: Blaise Potard
Bug: http://curl.haxx.se/bug/view.cgi?id=3516508
Explicit conversion to 'long' of curl_easy_setopt() third argument for options
CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH given that this is how its bitmasks are
docummented to be used.
By comparing if a different "progress point" is reached or not since the
previous update, the progress function callback for this now avoids many
superfluous screen updates. This has the nice side-effect that it fixes
a problem that causes a second progress meter line.
The second line output happened because when we use the -# progress
meter, we force a newline output after the transfer in the main loop in
curl, but when libcurl calls the progress callback from
curl_easy_cleanup() it would then output the progress display
again. Possibly the naive newline output is wrong but this optimization
was suitable anyway...
Reported by: Daniel Theron
Bug: http://curl.haxx.se/bug/view.cgi?id=3517418
Include stdbool.h only when it is available and configure is capable of
detecting a proper 'bool' data type when the header is included.
Compilation fix for old or unpatched versions of XL C compiler.
Report: http://curl.haxx.se/mail/archive-2012-04/0022.html
NSS_InitContext() was introduced in NSS 3.12.5 and helps to prevent
collisions on NSS initialization/shutdown with other libraries.
Bug: https://bugzilla.redhat.com/738456
Allow repeatable file name length reduction on file names with underscore or
dash characters. This is done in order to better support libcurl's existing
source file names and allow OS/400 package to build out of the box again.
configure script now provides conditional definitions for Makefile.am
that result in CURL_HIDDEN_SYMBOLS being defined by resulting makefiles
when appropriate.
Additionally, configure script option for symbol hiding control is now
named --enable-symbol-hiding --disable-symbol-hiding. While still valid,
old option name --enable-hidden-symbols --disable-hidden-symbols will
be deprecated in some future release.
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h,
configure will generate appropriate conditionals so that mentioned symbols
get defined and used in Makefiles at compilation time
Configuration files such as curl_config.h and all config-*.h no longer exist
nor are generated/copied into 'src' directory, now these only exist in 'lib'
directory from where curl tool sources uses them.
Additionally old src/setup.h has been refactored into src/tool_setup.h which
now pulls lib/setup.h
The possibility of a makefile needing an include path adjustment exists.
Don't set the "has_openssl" variable if yassl or polarssl is found as
they will simply not work as 100% drop-in replacements for some of the
stuff the "OpenSSL" feature is used for.
I spotted this problem when doing test runs with PolarSSL builds.
Curl_socket returns CURLE_COULDNT_CONNECT when the opensocket callback
returns CURL_SOCKET_BAD. Previous return value CURLE_FAILED_INIT
conveys incorrect information to the user.
Reworked the command sending from two specific LIST and RETR command
functions into a single command based function as well as the two
associated response handlers into a generic command handler.
By modifying the parameter list for ourWriteOut() and passing the
OutStruct that collects data in tool_operate, we get access to the
remote name that we're writing to. Shell scripters should find this
useful when used in conjuntion with the --remote-header-name option.
If an empty string is passed to CURLOPT_SSH_PUBLIC_KEYFILE, libcurl will
pass no public key to libssh2 which then tries to compute it from the
private key. This is known to work when libssh2 1.4.0+ is linked against
OpenSSL.
This change replaces RFC 2818 based hostname check in OpenSSL build with
RFC 6125 [1] based one.
The hostname check in RFC 2818 is ambiguous and each project implements
it in the their own way and they are slightly different. I check curl,
gnutls, Firefox and Chrome and they are all different.
I don't think there is a bug in current implementation of hostname
check. But it is not as strict as the modern browsers do. Currently,
curl allows multiple wildcard character '*' and it matches '.'. (as
described in the comment in ssluse.c).
Firefox implementation is also based on RFC 2818 but it only allows at
most one wildcard character and it must be in the left-most label in the
pattern and the wildcard must not be followed by any character in the
label.[2] Chromium implementation is based on RFC 6125 as my patch does.
Firefox and Chromium both require wildcard in the left-most label in the
presented identifier.
This patch is more strict than the current implementation, so there may
be some cases where old curl works but new one does not. But at the same
time I think it is good practice to follow the modern browsers do and
follow the newer RFC.
[1] http://tools.ietf.org/html/rfc6125#section-6.4.3
[2] https://bugzilla.mozilla.org/show_bug.cgi?id=159483
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the
download size was known (like with a Content-Length header), but the
subsequent URL (transfered after the 3xx page) was chunked encoded, then
the previous "known download size" would linger and cause the progress
meter to get incorrect information, ie the former value would remain
being sent in. This could easily result in downloads that were WAY
larger than "expected" and would cause >100% outputs with the curl
command line tool.
Test case 599 was created and it was used to repeat the bug and then
verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3510057
Reported by: Michael Wallner
It is now possible to calculate the md5 sum as the stream of buffers
becomes known where as previously it was only possible to calculate the
md5 sum of a pre-prepared buffer.
This feature allows the user to specify and use additional POP3
commands such as UIDL and DELE via libcurl's CURLOPT_CUSTOMREQUEST or
curl's -X command line option.
Simplified the code to remove the need for a separate "LIST <msg id>"
command handler and state machine and instead use the LIST command
handler for both operations.
Moved the server greeting response handling code from the statemach_act
functions to separate response functions. This makes the code simpler
to follow and provides consistency with the other responses that are
handled here.
Original wording could lead users in thinking it tries to
somehow parse the filename for a date expression (like
news_2012_03_05.html). It never mentions that it actually
reads the mtime of the file in filesystem.
This allows building of libcurl on DOS using DJGPP 2.04 and Watt-32
sockets. I know there's already Makefile.djgpp, but I find this more
convenient since I'm used to using the ./configure script from other
platforms
The commit e650dbde86 that stripped off [brackets] from ipv6-only host
headers for the sake of cookie parsing wrongly incremented the host
pointer which would cause a bad free() call later on.
The refactoring of HTTP CONNECT handling in commit 41b0237834 that
made it protocol independent broke it for the multi interface. This fix
now introduce a better state handling and moved some logic to the
http_proxy.c source file.
Reported by: Yang Tse
Bug: http://curl.haxx.se/mail/lib-2012-03/0162.html
Take in account that POSIX standard Issue 7 drops h_errno support. Now, we also
consider getaddrinfo() to be thread-safe when (_POSIX_C_SOURCE >= 200809L) or
(_XOPEN_SOURCE >= 700) independently of whether h_errno exists or not.
Windows standard libraries are located in C:/Program Files/Microsoft
SDKs/[...]. They are already included in the default MSVC
LIBPATH. Hence, find_library(WSOCK32_LIBRARY wsock32) and
find_library(WS2_32_LIBRARY ws2_32) are not needed. They return the full
path to the libraries including spaces. Of course,
list_spaces_append_once will mangle the result and the build fails.
Bug: http://curl.haxx.se/bug/view.cgi?id=3494968
Changed the returned curl error codes for EHLO and HELO responses from
CURLE_LOGIN_DENIED to CURLE_REMOTE_ACCESS_DENIED as a negative response
from these commands represents no service as opposed to a login error.
An alternative would be:
1. specify HTTPS_CA_DIR and/or HTTPS_CA_FILE
2. ensure that Net::SSL is being used, and IO::Socket::SSL is NOT being
used
This question and answer explain:
http://stackoverflow.com/questions/74358/
Curl_protocol_connect() now does the tunneling through the HTTP proxy if
requested instead of letting each protocol specific connection function
do it.
In line with the manpage, curl-config --libs should only provide the necessary
library flags for the linker in order to compile software with libcurl. Also
with this change, we match what the pkg-config file provides.
Commit 466150bc64 fixed the Host: header with CONNECT, but I then
forgot the preceeding request-line. Now this too uses [brackets]
properly if a ipv6 numerical address was given.
Bug: http://curl.haxx.se/bug/view.cgi?id=3493129
Reported by: "Blacat"
Set the conn->data->info.httpcode variable in smtp_statemach_act() to
allow Curl_getinfo() to return the SMTP response code via the
CURLINFO_RESPONSE_CODE action.
The line endings broke when I saved the three recent patches (my fault,
not Colin's) to 'git am' them.
Adjusted the stripping of the test program for comparing to also exclude
the SSH key file name as that will differ and use a local path name.
The intention is to take the output of curl's --libcurl option,
as exercised in test 14xx, and generate a corresponding test15xx
in which the generated code is compiled and run. This will verify
that the generated code behaves equivalently to the original
invocation of the curl command.
The script is not yet integrated into the configure / makefile
machinery.
This patch improves the output of curl's --libcurl option by
generating code which builds curl_httppost and curl_slist lists, and
uses symbolic names for enum and flag values. Variants of the
my_setopt macro in tool_setopt.h are added in order to pass extra type
information to the code-generation step in tool_setopt.c.
If curl is configured with --disable-libcurl-option then the macros
call curl_easy_setopt directly.
With commit 035ef06bda applied, the test pop3 server needs to send
".\r\n" as the body terminating sequence and there needs to be a final
CRLF in the actual body in the test data file.
Curl_pop3_write() would drop the final CRLF of a message as it was
considered part of the EOB as opposed to part of the message. Whilst
the EOB sequence needs to be searched for by the function only the
final 3 characters should be removed as per RFC-1939 section 3.
Reported by: Rich Gray
Bug: http://curl.haxx.se/mail/lib-2012-02/0051.html
Curl_smtp_escape_eob() would leave off final CRLFs from emails ending
in multiple blank lines additionally leaving the smtpc->eob variable
with the character count in, which would cause problems for additional
emails when sent through multiple calls to curl_easy_perform() after a
CURLOPT_CONNECT_ONLY.
Added information relating to the new CURLOPT_MAIL_AUTH parameter and
reworked CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT to be a clearer.
Fixed inconsistencies of "vocalisation of the abbreviation" versus
"vocalisation of the first word" for all abbreviations.
Corrected a typo in CURLOPT_NOPROXY.
Fixed the use of angled brackets "<>" in the optional AUTH parameter as
per RFC-2554 section 5. The address should not include them but an
empty address should be replaced by them.
Added a new CURLOPT_MAIL_AUTH option that allows the calling program to
set the optional AUTH parameter in the MAIL FROM command.
When this option is specified and an authentication mechanism is used
to communicate with the mail server then the AUTH parameter will be
included in the MAIL FROM command. This is particularly useful when the
calling program is acting as a relay in a trusted environment and
performing server to server communication, as it allows the relaying
server to specify the address of the mailbox that was used to
authenticate and send the original email.
Modify configure.ac to test for new CyaSSL Init function and remove
default install path to system. Change to CyaSSL OpenSSL header and
proper Init in code as well.
Note that this no longer detects or works with CyaSSL before v2
Fixed incorrect behavior in smtp_done() which would cause the end of
block data to be sent to the SMTP server if libcurl was operating in
connect only mode. This would cause the server to return an error as
data would not be expected which in turn caused libcurl to return
CURLE_RECV_ERROR.
Fix the str2num() function to not check if the input string starts with a
digit, since strtol() supports numbers prepended with '-' (and '+') too.
This makes the --max-redirs option work as documented.
... by making sure that the string is always freed after the invoke as
parse_proxy will always copy the data and this way there's a single
free() instead of multiple ones.
The proxy parser function strips off trailing slashes off the proxy name
which could lead to a mistaken zero length proxy name which would be
treated as no proxy at all by subsequent functions!
This is now detected and an error is returned. Verified by the new test
1329.
Reported by: Chandrakant Bagul
Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
This new option tells curl to not work around a security flaw in the
SSL3 and TLS1.0 protocols. It uses the new libcurl option
CURLOPT_SSL_OPTIONS with the CURLSSLOPT_ALLOW_BEAST bit set.
Allow an appliction to set libcurl specific SSL options. The first and
only options supported right now is CURLSSLOPT_ALLOW_BEAST.
It will make libcurl to disable any work-arounds the underlying SSL
library may have to address a known security flaw in the SSL3 and TLS1.0
protocol versions.
This is a reaction to us unconditionally removing that behavior after
this security advisory:
http://curl.haxx.se/docs/adv_20120124B.html
... it did however cause a lot of programs to fail because of old
servers not liking this work-around. Now programs can opt to decrease
the security in order to interoperate with old servers better.
Use the new library CURLOPT_TCP_KEEPALIVE rather than disabling this via
the sockopt callback. If --keepalive-time is used, apply the value to
CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL.
This adds three new options to control the behavior of TCP keepalives:
- CURLOPT_TCP_KEEPALIVE: enable/disable probes
- CURLOPT_TCP_KEEPIDLE: idle time before sending first probe
- CURLOPT_TCP_KEEPINTVL: delay between successive probes
While not all operating systems support the TCP_KEEPIDLE and
TCP_KEEPINTVL knobs, the library will still allow these options to be
set by clients, silently ignoring the values.
When CURLOPT_REFERER has been used, curl_easy_reset() did not properly
clear it.
Verified with the new test 598
Bug: http://curl.haxx.se/bug/view.cgi?id=3481551
Reported by: Michael Day
We want to continue to the next URL to try even on failures returned
from libcurl. This makes -f with ranges still get subsequent URLs even
if occasional ones return error. This was a regression as it used to
work and broke in the 7.23.0 release.
Added test case 1328 to verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3481223
Reported by: Juan Barreto
When the target host was given as a IPv6 numerical address, it was not
properly put within square brackets for the Host: header in the CONNECT
request. The "normal" request did fine.
Reported by: "zooloo"
Bug: http://curl.haxx.se/bug/view.cgi?id=3482093
When support for nettle was added in 64f328c787, I overlooked
the fact that AC_CHECK_LIB doesn't add the tested lib to LIBS
if the check succeeded, if a custom success code block was present.
(The previous version of the check had an empty block for
successful checks, adding the lib to LIBS implicitly.)
Therefore, explicitly add either nettle or gcrypt to LIBS, after
deciding which one to use. Even if they can be linked in
transitively, it is safer to actually link explicitly to them.
This fixes building with gnutls with linkers that don't allow
linking transitively, such as for windows.
When connecting to a domain with multiple IP addresses, allow different,
decreasing connection timeout values. This should guarantee some
connections attempts with sufficiently long timeouts, while still
providing fallback.
With advice from Nikos Mavrogiannopoulos, changed the priority string to
add "actual priorities" and favour ARCFOUR. This makes libcurl work
better when enforcing SSLv3 with GnuTLS. Both in the sense that the
libmicrohttpd test is now working again but also that it mitigates a
weakness in the older SSL/TLS protocols.
Bug: http://curl.haxx.se/mail/lib-2012-01/0225.html
Reported by: Christian Grothoff
Protocols (IMAP, POP3 and SMTP) that use the path part of a URL in a
decoded manner now use the new Curl_urldecode() function to reject URLs
with embedded control codes (anything that is or decodes to a byte value
less than 32).
URLs containing such codes could easily otherwise be used to do harm and
allow users to do unintended actions with otherwise innocent tools and
applications. Like for example using a URL like
pop3://pop3.example.com/1%0d%0aDELE%201 when the app wants a URL to get
a mail and instead this would delete one.
This flaw is considered a security vulnerability: CVE-2012-0036
Security advisory at: http://curl.haxx.se/docs/adv_20120124.html
Reported by: Dan Fandrich
OpenSSL added a work-around for a SSL 3.0/TLS 1.0 CBC vulnerability
(http://www.openssl.org/~bodo/tls-cbc.txt). In 0.9.6e they added a bit
to SSL_OP_ALL that _disables_ that work-around despite the fact that
SSL_OP_ALL is documented to do "rather harmless" workarounds.
The libcurl code uses the SSL_OP_ALL define and thus logically always
disables the OpenSSL fix.
In order to keep the secure work-around workding, the
SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS bit must not be set and this change
makes sure of this.
Reported by: product-security at Apple
Using a URL with embedded user name and password didn't work if the host
was given as a numerical IPv6 string, like ftp://user:password@[::1]/
Reported by: Brandon Wang
Bug: http://curl.haxx.se/mail/archive-2012-01/0047.html
As is pointed out in this bug report, there can indeed be situation
where --stderr has a point even when the "real" stderr can be
redirected. Remove the superfluous and wrong comment.
bug: http://curl.haxx.se/bug/view.cgi?id=3476020
SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG option enabling allowed successfull
interoperability with web server Netscape Enterprise Server 2.0.1 released
back in 1996 more than 15 years ago.
Due to CVE-2010-4180, option SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG has
become ineffective as of OpenSSL 0.9.8q and 1.0.0c. In order to mitigate
CVE-2010-4180 when using previous OpenSSL versions we no longer enable
this option regardless of OpenSSL version and SSL_OP_ALL definition.
Allows tests from the libtest subdir to generate log traces
similar to those of curl with --tracetime and --trace-ascii
options but with output going to stderr.
Some functions using getaddrinfo and gethostbyname were still
mistakingly being used/linked even if c-ares was selected as resolver
backend.
Reported by: Arthur Murray
Bug: http://curl.haxx.se/mail/lib-2012-01/0160.html
In commit c834213ad5 we re-used some obsolete error codes, and here are
two defines that makes sure existing source codes that happen to use any
of these deprecated ones will still compile.
As usual, define CURL_NO_OLDIES to avoid getting these "precaution
defines".
Previously the code would create a dummy socket while resolving just to
have curl_multi_fdset() return something but the non-win32 version
doesn't do it this way and the creation and use of a socket that isn't
made with the common create-socket callback can be confusing to apps
using the multi_socket API etc.
This change removes the dummy socket and thus will cause
curl_multi_fdset() to return with maxfd == -1 more often.
make 'pidfile' and 'logfile' options appear first on command line in order
to ensure that processing of other options which write to logfile do this
to intended file and not the default one.
Fixed a problem in POP3 and IMAP where a connection would fail when
CURLUSESSL_TRY was specified for a server that didn't support
SSL/TLS connections rather than continuing.
The STARTTLS response code in SMTP, POP3 and IMAP would return
CURLE_LOGIN_DENIED rather than CURLE_USE_SSL_FAILED when SSL/TLS
was not available on the server.
Reported by: Gokhan Sengun
Bug: http://curl.haxx.se/mail/lib-2012-01/0018.html
There's a new 'http-proxy' server for tests that runs on a separate port
and lets clients do HTTP CONNECT to other ports on the same host to
allow us to test HTTP "tunneling" properly.
Test cases now have a <proxy> section in <verify> to check that the
proxy protocol part matches correctly.
Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316
was added.
Unfortunately we have no test cases for this and I have no SSPI build or
server to verify this with. The change seems simple enough though.
Bug: http://curl.haxx.se/bug/view.cgi?id=3466497
Reported by: Patrice Guerin
When the buffer gets realloced to hold the file name in the
SSH_SFTP_READDIR_LINK state, the counter was not bumped accordingly.
Reported by: Armel Asselin
Patch by: Armel Asselin
Bug: http://curl.haxx.se/mail/lib-2011-12/0249.html
When a HTTP connection is re-used for a subsequent request without
proxy, it would always re-use the Host: header of the first request. As
host names are case insensitive it would make curl send another host
name case that what the particular request used.
Now it will instead always use the most recent host name to always use
the desired casing.
Added test case 1318 to verify.
Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html
Reported by: Alex Vinnik
The load host names to DNS cache function was moved to hostip.c and it
now makes sure to not add host names that already are present in the
cache. It would previously lead to memory leaks when for example using
the --resolve and multiple URLs on the command line.
These examples show how to fetch a single message (RETR command) and how to
list all the messages in a given mailbox (LIST command), with authentication
via SSL.
They were both based on the https.c example.
Initial step in order to allow our pingpong server to better support arbitrary
application data splitting among TCP packets. This first commit only addresses
reasembly of data that sockfilter processes reads from soockets and pingpong
server later reads from sockfilters stdout.
Make testcurl.pl ignore messages pertaining to third party m4 files we don't
care nor use on a file basis policy while retaining all other warnings.
This closes temporary commit e71e226f
The commit 9dd85bc unintentionally changed the way we compute the time
spent waiting for 100-continue. In particular, when using a SSL client
certificate, the time spent by SSL handshake was included and could
cause the CURL_TIMEOUT_EXPECT_100 timeout to be mistakenly fired up.
Bug: https://bugzilla.redhat.com/767490
Reported by: Mamoru Tasaka
ftp_do_more() returns after accepting the server connect however it
needs to fall through and set "*complete" to TRUE before exit from the
function.
Bug: http://curl.haxx.se/mail/lib-2011-12/0250.html
Reported by: Gokhan Sengun
In the recent do_more fix the new logic was mistakenly checking the
pointer instead of what it points to.
Reported by: Gokhan Sengun
Bug: http://curl.haxx.se/mail/lib-2011-12/0250.html
When sending quote command to a SFTP server and 'mkdir' was used, it
would send fixed permissions and not use the CURLOPT_NEW_DIRECTORY_PERMS
as it should.
Reported by: Armel
Patch by: Armel
Bug: http://curl.haxx.se/mail/lib-2011-12/0249.html
The INTERNALS document suggested that compatibility should be
maintained with perl version 4, but this was untrue - scripts such as
chksource.pl and runtests.pl use perl5-isms.
CURLOPT_RESOLVE populates the DNS cache with entries that are marked as
eternally in use. Those entries need to be taken care of when the cache
is killed off.
Bug: http://curl.haxx.se/bug/view.cgi?id=3463121
Reported by: "tw84452852"
First off the timeout for accepting a server connect back must of course
respect a global timeout. Then the timeleft function is only used by ftp
code so it was moved to ftp.c and made static.
"wait_data_conn" was added to the connectionbits in commit c834213ad5 for
handling active FTP connections but as it is purely FTP specific and now
only ever accessed by ftp.c I moved it into the FTP connection struct.
Backpedaled out the funny double-change of state in the multi state
machine by adding a new argument to the do_more() function to signal
completion. This way it can remain in the DO_MORE state properly until
done. Long term, the entire DO_MORE logic should be moved into the FTP
code and be hidden from the multi code as the logic is only used for
FTP.
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
When working with the Android Standalone Toolchain the compiler defines
this macro:
/path/to/arm-linux-androideabi-gcc -E -dM - < /dev/null \
| grep -i android
#define __ANDROID__ 1
We really need to check both ANDROID and __ANDROID__ since I've observed
that:
* if you use Android.mk file(s) and the 'ndk-build' script (aka vanilla
way), ANDROID is predefined (see -DANDROID extra C flag),
* if you use the Android Standalone Toolchain, then __ANDROID__ is
predefined as stated by the compiler
As commit ce896875f8 fixed a timer that accidentally had been moved in
code and then returned a bad timer, the lib500.c code (used in test 500
and some others) now verifies 5 timers against each other to verify that
they have the correct relative values. We cannot compare against
absolute values as the timings will vary a lot.
It makes it easier to introduce debug outputs in this function, and
everything in the function is using the value anyway so it might even be
more efficient.
Regression introduced in 7.23.0 with commit 9dd85bce. The function in
which the PRETRANSFER time stamp was recorded was moved in time causing
it be stored very quickly after the start timestamp. On most systems
shorter than 1 millisecond and thus it wouldn't even show with -w
"%{time_pretransfer}" using the command line tool.
Bug: http://curl.haxx.se/mail/archive-2011-12/0022.html
Reported by: Toni Moreno
Parameters were underquoted, resulting in
warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Allow, at configure time, the production of versioned symbols. The
symbols will look like "CURL_<FLAVOUR>_<VERSION> <SYMBOL>", where
<FLAVOUR> represents the SSL flavour (e.g. OPENSSL, GNUTLS, NSS, ...),
<VERSION> is the major SONAME version and <SYMBOL> is the actual symbol
name. If no SSL library is enabled the symbols will be just
"CURL_<VERSION> <SYMBOL>".
This gets the appconnect time right for ssl backends, which don't
support non-blocking connects.
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
One new feature, one bug fix. Introduced references in this file for
mentioned issues after this discussion:
http://curl.haxx.se/mail/lib-2011-12/0187.html
The plan is to let the references get moved over to the changes.html
file at release-time
Document the possibility of providing multiple values using the ":"
separator, and the fact that the default value will be ignored if the
option is used.
Test case 1315 was added to verify this functionality. When passing in
multiple files to a single -F, the parser would get all confused if one
of the specified files had a custom type= assigned.
Reported by: Colin Hogben
Do not try to resolve interfaces names via DNS by recognizing interface
names in a few ways. If the interface option argument has a prefix of
"if!" then treat the argument as only an interface. Similarly, if the
interface argument is the name of an interface (even if it does not have
an IP address assigned), treat it as an interface name. Finally, if the
interface argument is prefixed by "host!" treat it as a hostname that
must be resolved by /etc/hosts or DNS.
These changes allow a client using the multi interfaces to avoid
blocking on name resolution if the interface loses its IP address or
disappears.
Fixed the connection reuse detection in ConnectionExists() when
comparing a new connection that is non-SSL based against that of a SSL
based connection that has become so by being upgraded via TLS.
This is a regression since who knows when. When spotting that a HTTP
proxy is used we must not uncondititionally enable the HTTP protocol
since if we do tunneling through the proxy we're still using the target
protocol.
Reported by: Naveen Chandran
Starting with some recent OpenSSL versions (1.0.0e was mentioned)
linking with a static openssl requires a set of more libs to be linked
on Windows.
Thanks also to Steve Holme and Martin Storsj for additional feedback.
Bug: http://curl.haxx.se/mail/lib-2011-12/0063.html
Reported by: Ward Willats
If no SSLv2 was detected in OpenSSL by configure, then we enforce the
OPENSSL_NO_SSL2 define as it seems some people report it not being
defined properly in the OpenSSL headers.
If the option is set to 0, the default timeout will be used - which in
modern libcurl versions equals 300 seconds (== 5 minutes).
Bug: http://curl.haxx.se/mail/lib-2011-12/0051.html
Reported by: Vladimir Grishchenko
Adds a timer based off of CURLINFO_TOTAL_TIME that is used to perform
certain actions after a minimum amount of time has passed using the
progress function. As a consequence the curl handle is now also passed
into the progress function. Progress example now also includes an
example of how to retreive the TOTAL_TIME and print it out.
When a 32 digit hex key is given as a hostkey md5 checksum, the code
would still run it against the knownhost check and not properly
acknowledge that the md5 should then be the sole guide for.
The verbose output now includes the evaluated MD5 hostkey checksum.
Some related source code comments were also updated.
Bug: http://curl.haxx.se/bug/view.cgi?id=3451592
Reported by: Reza Arbab
As there are different return codes for host vs proxy errors, this function
now properly returns the code properly depending on what was attempted to get
resolved.
Bug: http://curl.haxx.se/mail/archive-2011-12/0010.html
Reported by: Jason Liu
When making a distinction which return code to return, the code previously
only regarded HTTP proxies to be proxies and thus return host-related errors
for failures on other proxy types than HTTP. Now all proxy types will be
considered proxies...
Keep track of which sockets that are the result of accept() calls and
refuse to call the closesocket callback for those sockets. Test case 596
now verifies that the open socket callback is called the same number of
times as the closed socket callback for active FTP connections.
Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html
Reported by: Gokhan Sengun
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
If the first name server is not available, the multi interface does
not invoke the socket_cb when the DNS request to the first name server
timesout. Ensure that the list of sockets are always updated after
calling Curl_resolver_is_resolved.
This bug can be reproduced if Curl is complied with --enable_ares and
your code uses the multi socket interfaces and the
CURLMOPT_SOCKETFUNCTION option. To test try:
iptables -I INPUT \
-s $(sed -n -e '/name/{s/.* //p;q}' /etc/resolv.conf)/32 \
-j REJECT
and then run a program which uses the multi-interface.
Changed the eob detection to work across the whole of the buffer so that
lines that begin with a dot (which the server will have escaped) are
passed to the client application correctly.
Using libtool 1.5.x (x < 26) with autoconf 2.6x or later generates warnings
due to some libtool variables not following naming convention for variables
that will be cached.
This is addressed renaming a couple of variables to make these follow expected
naming convention.
Previously the log function would just filter out all CR and LF
occurances from the log to make it more readable. This had the downside
that it made it very hard to see CR LFs when they actually matters.
Now, they're instead converted to "[CR]" and "[LR]" in the log to become
apparent to readers.
Curl_pop3_write() now has a state machine that scans for the end of a
POP3 body so that the CR LF '.' CR LF sequence can come in everything
from one up to five subsequent packets.
Test case 810 is modified to use SLOWDOWN which makes the server pause
between each single byte and thus makes the POP3 body get sent to curl
basically one byte at a time.
configure.ac:1349: error: possibly undefined macro: PKG_CONFIG_LIBDIR
Obviously this is not a problem with pkg-config 0.26 but older versions
seem to show this.
Fix suggested by: Kamil Dudka
Reported by: Guenter
Bug: http://curl.haxx.se/mail/lib-2011-11/0298.html
"Active FTP hangs if server does not open data connection"
The server first sends a 150 and then when libcurl waits for the data
transfer, the server sends a 425.
The protocol parts for these tests do not include QUIT simply because
the error is CURLE_OPERATION_TIMEDOUT (28) which is a generic timeout
error without specificly saying for which connection it concerns, and
for timeouts libcurl marks the control channel as "invalid". As this
test case times out for the data connection it could still use the
control channel.
Added convenience macro to use to check if a handle is using a shared
SSL session, and fixed so that Curl_ssl_close_all() doesn't lock when
the session isn't shared.
Skip a floating point addition operation when integral part of time difference
is zero. This avoids potential floating point addition rounding problems while
preserving decimal part value.
Macros that look like function calls need to be made so that we can use
semicolons properly for indentation and for reducing the risk for
mistakes when using them.
1) enables the Window Size option
2) allows the server to enable the echo mode
3) allows an app using libcurl to disable the default binary mode
Signed-off-by: Laurent Rabret
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
Experience has shown that the symbols-in-versions file is very useful to
applications that want to build with a wide range of libcurl versions.
It is however easy to get it wrong and the source gets a bit messy with
all the fixed numerical comparisions.
The point of this script is to provide an easy-to-use macro for libcurl-
using applications to do preprocessor checks for specific libcurl
defines, and yet make the code clearly show what the macro is used for.
Bugfix: https handshake fails using gnutls 3 on windows
http://sourceforge.net/tracker/index.php?func=detail&aid=3441084&group_id=976&atid=100976
New gnutls versions have an error handler that knows about Winsock
errors, which is why gnutls_transport_set_global_errno() was deprecated
and then removed.
This is a correction of commit f5bb370 (blame me) which meant to
reimplement gnutls_transport_set_global_errno(), which is not necessary.
Regression: commit b998d95b (shipped first in release 7.22.0) made the
condition always equal false that should reset the TIMER_CONNECT timer
and call the Curl_verboseconnect() function.
Reported by: "Captain Basil"
Bug: http://curl.haxx.se/mail/archive-2011-11/0035.html
A regression between 7.22.0 and 7.23.0 -- downloading a file with the
flags -O and -J results in the content being written to stdout if and
only if there was no Content-Disposition header in the http response. If
there is a C-D header with a filename attribute, the output is correctly
written.
Reported by: Dave Reisner
Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
The progress bar output function would blindly use the terminal width
without bounds checking. When using a very wide terminal that caused a
buffer overflow and segfault.
We now limit the max bar with to 255 columns, and I simplified the code
to avoid an extra snprintf and buffer.
Bug: http://curl.haxx.se/bug/view.cgi?id=3435710
Reported by: Alexey Zakhlestin
591 -> FTP multi PORT and 425 on upload
592 -> FTP multi PORT and 421 on upload
593 -> FTP multi PORT upload, no data conn and no transient neg. reply
594 -> FTP multi PORT upload, no data conn and no positive prelim. reply
1206 -> FTP PORT and 425 on download
1207 -> FTP PORT and 421 on download
1208 -> FTP PORT download, no data conn and no transient negative reply
1209 -> FTP PORT download, no data conn and no positive preliminary reply
When the user requests PORT with a specific port or port range, the code
could lock up in an endless loop. There's now an extra conditional that
makes sure to special treat the error and try the local address only
once so a second failure will abort the loop correctly.
Bug: http://curl.haxx.se/bug/view.cgi?id=3433968
Reported by: Gokhan Sengun
This test is created to verify Rene Bernhardt's patch which makes sure
libcurl properly _not_ deals with Negotiate if not asked to even if the
proxy says it can serve it.
If a proxy offers several Authentication schemes where NTLM and
Negotiate are offered by the proxy and you tell libcurl not to use the
Negotiate scheme then the request never returns when the proxy answers
with its HTTP 407 reply.
It is reproducible by the following steps:
- Use a proxy that offers NTLM and Negotiate ( CURLOPT_PROXY and
CURLOPT_PROXYPORT )
- Tell libcurl NOT to use Negotiate CURL_EASY_SETOPT(CURLOPT_PROXYAUTH,
CURLAUTH_BASIC | CURLAUTH_DIGEST | CURLAUTH_NTLM )
- Start the request
The call to CURL_EASY_PERFORM never returns. If you switch on debug
logging you can see that libcurl issues a new request As soon as it
received the 407 reply. Instead it should return and set the response
code to 407.
Bug: http://curl.haxx.se/mail/lib-2011-10/0323.html
Move calling of ERR_remove_state(0) a.k.a ERR_remove_thread_state(NULL)
from Curl_ossl_close_all() to Curl_ossl_cleanup().
In this way ERR_remove_state(0) is now only called in libcurl by
curl_global_cleanup(). Previously it would get called by functions
curl_easy_cleanup(), curl_multi_cleanup and potentially each time a
connection was removed from a connection cache leading to premature
destruction of OpenSSL's thread local state hash.
Multi-threaded apps using OpenSSL enabled libcurl should still call
function ERR_remove_state(0) or ERR_remove_thread_state(NULL) at the
very end end of threads that do not call curl_global_cleanup().
Now called 'use_ssl' instead, which better matches the current CURLOPT
name and since the option is used for all pingpong protocols (at least)
it makes sense to not use 'ftp' in the name.
Use gnutls_priority_set_direct() instead of gnutls_protocol_set_priority().
Remove the gnutls_certificate_type_set_priority() use since x509 is the
default certificate type anyway.
Reported by: Vincent Torri
Make NODATACONN425 and NODATACONN421 return a 150 positive preliminary reply
before 425 or 421.
New NODATACONN150 returns 150 without further positive nor negative reply
Now NODATACONN doesn't reply anything at all.
Some torture tests left FTP test server in an unresponsive state, resulting
in torture tests that actually completed following unexpected code paths.
Changes in this commit solely address this issue and some adjustments for
ftpserver.pl logging relative to data channel establishment and tear down.
Pending NODATACONN relative adjustments reserved for a further commit.
Ensure verification takes place with no server commands file.
Ignore verbose setting for running server precheck.
Tweak unresponsive server message, to allow detection by haxx.se scripts.
NODATACONN421: applies only to active FTP mode, instructs server to not
establish data connection back to client and reply with FTP 421.
NODATACONN425: applies only to active FTP mode, instructs server to not
establish data connection back to client and reply with FTP 425.
NODATACONN: applies to both active and passive FTP modes, instructs server
to not establish nor accept a data channel and fool client into believing
that the data channel connection is possible.
Some polishing probably required.
This extends the fix from commit d7934b8bd4
When the multi state is changed within the multi_runsingle from DOING to
DO_MORE, we didn't immediately start the FTP state machine again. That
then left the FTP state in FTP_STOP. When curl_multi_fdset() was
subsequently called, the ftp_domore_getsock() function would return the
wrong fd info.
Reported by: Gokhan Sengun
When running torture tests, verify before each test case that required
pingpong servers which are supposed to be alive are actually responsive.
If found not responsive then restart them.
EPRT is now supported by default by the server. To disable it, use the
generic REPLY instruction in the <servercmd> tag. Test 116 now has it
disabled. All other existing active FTP port tests strip out the port
commands from the logs already so the change of the server isn't that
noticable.
As commit 5850cc4808 clarifies, libcurl can deliver header lines that
are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that
size. The curl tool has check (when built debug-enabled) that made the
wrong checks and this new test 1205 verifies that larger headers work.
Added pop3 username and password example as well as an explanation of
how path part of the URL is used under pop3.
Additionally have corrected a couple of typos.
After a PORT has been issued, and the multi handle would switch to the
CURLM_STATE_DO_MORE state (which is unique for FTP), libcurl would
return the wrong fdset to wait for when curl_multi_fdset() is
called. The code would blindly assume that it was waiting for a connect
of the second connection, while that isn't true immediately after the
PORT command.
Also, the function multi.c:domore_getsock() was highly FTP-centric and
therefore ugly to keep in protocol-agnostic code. I solved this problem
by introducing a new function pointer in the Curl_handler struct called
domore_getsock() which is only called during the DOMORE state for
protocols that set that pointer.
The new ftp.c:ftp_domore_getsock() function now returns fdset info about
the control connection's command/response handling while such a state is
in use, and goes over to waiting for a writable second connection first
once the commands are done.
The original problem could be seen by running test 525 and checking the
time stamps in the FTP server log. I can verify that this fix at least
fixes this problem.
Bug: http://curl.haxx.se/mail/lib-2011-10/0250.html
Reported by: Gokhan Sengun
The fix is pretty much the one Nick Zitzmann provided, just edited to do
the right indent levels and with test case 1204 added to verify the fix.
Bug: http://curl.haxx.se/mail/lib-2011-10/0190.html
Reported by: Nick Zitzmann
The default lowat level for gnutls-2.12* is set to zero to avoid
unnecessary system calls and the gnutls_transport_set_lowat function has
been totally removed in >=gnutls-3 which causes build failures.
Therefore, the function shouldn't be used except for versions that
require it, <gnutls-2.12.0.
Previously the bit was set before the connection was found working so if
it would first fail to an ipv6 address and then connect fine to a IPv4
address the variable would still be TRUE.
Reported by: Thomas L. Shinnick
Bug: http://curl.haxx.se/bug/view.cgi?id=3421912
Previously we required that -S/--show-error was used _after_
-s/--silent. This was slightly confusing since we strive to make
arguments as position independent as possible.
Now, you can use them in any order and the result should still be the
same.
Bug: http://curl.haxx.se/bug/view.cgi?id=3424286
Reported by: Andreas Olsson
When doing a multipart formpost with a read callback, and that callback
returns CURL_READFUNC_ABORT, that return code must be properly
propagated back and handled accordingly. Previously it would be handled
as a zero byte read which would cause a hang!
Added test case 587 to verify. It uses the lib554.c source code with a
small ifdef.
Reported by: Anton Bychkov
Bug: http://curl.haxx.se/mail/lib-2011-10/0097.html
There might be situations where a user would want to unset this option.
Avoid forcing him/her to cast the NULL argument to (char *) in order to
get past the compile time typecheck.
Save the errno value immediately after a connect() failure so that it
won't get reset to something else before we read it.
Bug: http://curl.haxx.se/mail/lib-2011-10/0066.html
Reported by: Frank Van Uffelen and Fabian Hiernaux
When, for a given test, server is instructed to close connection after
server reply we now wait a very small amount of time (50ms) before doing
so. This is done to allow client to, at least partially, read server
reply before getting an ECONNRESET.
The above is required to make test cases 1070, 1200, 1201 and 1202 pass
with Cygwin 1.5.X on W2K.
GOPHER test server closes connection after _every_ server-reply, as such,
at some point it could require a bigger time or using shutdown() before
a server-side initiated disconnection.
Set ACK timeout to 5 seconds.
If we are waiting for block X and receive block Y that is the expected one, we
should send ACK and increase X (which is already implemented). Otherwise drop
the packet and don't increase retry counter.
Prevent modification of easy handle being added with curl_multi_add_handle()
unless this function actually suceeds.
Run Curl_posttransfer() to allow restoring of SIGPIPE handler when
Curl_connect() fails early in multi_runsingle().
It makes much nicer and less convuluted code everywhere if this struct
member is always present even when libcurl is built without SSL support.
This reverts parts of commit 15e3e45170
Modified smtp_endofresp() to detect NTLM from the server specified list
of supported authentication mechanisms.
Modified smtp_authenticate() to start the sending of the NTLM data.
Added smtp_auth_ntlm_type1_message() which creates a NTLM type-1
message. This function is used by authenticate() to start the sending
of data and by smtp_state_auth_ntlm_resp() when the AUTH command
doesn't contain the type-1 message as part of the initial response.
This lack of initial response can happen if an OOM error occurs or the
type-1 message is longer than 504 characters. As the main AUTH command
is limited to 512 character the data has to be transmitted in two
parts; one containing the AUTH NTLM and the second containing the
type-1 message.
Added smtp_state_auth_ntlm_type2msg_resp() which handles the incoming
type-2 message and sends an outgoing type-3 message. This type-2
message is sent by the server in response to our type-1 message.
Modified smtp_state_auth_resp() to handle the response to: the AUTH
NTLM without the initial response and the type-2 response.
Modified smtp_disconnect() to cleanup the NTLM SSPI stack.
Added the output message length as a parameter to both
Curl_ntlm_create_type1_message() and Curl_ntlm_create_type3_message()
for use by future functions that require it.
Updated curl_ntlm.c to cater for the extra parameter on these two
functions.
Changed the name of variable l, in several functions, which represents
the length of strings being sent to the server, to len which is more
meaningful and consistent with other code in smtp.c and elsewhere.
Reworked smtp_authenticate() to be simpler and easier to follow.
Variables and now initialised in their definitions and if no username
and password are specified the function sets the state to SMTP_STOP and
returns immediately, rather than being part of a huge if statement.
Don't even declare the struct members for disabled features
Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface
when trying to set a sharing option that has been disabled (or not
enabled) in the library.
When the progress function returns to cancel the request, we must mark
the connection to get closed and it must do to the DONE state.
do_init() must be called as early as possible so that state variables
for new connections are reset early. We could otherwise see that the old
values were still there when a connection was to be disconnected very
early and it would make it behave wrongly.
Bug: http://curl.haxx.se/mail/lib-2011-10/0006.html
Reported by: Vladimir Grishchenko
The size of the email can now be set via CURLOPT_INFILESIZE. This
allows the email to be rejected by the server, if supported, and the
maximum size has been configured on the server.
Slight rewording of the CURLOPT_URL SMTP sub-section.
Corrected the incorrect use of hyphens on the three uses of
"zero-terminated" with "zero terminated" to match the rest of the
document.
Corrected the use of an out of place hyphen in CURLOPT_NOPROXY section.
Maximum amount of data a header callback is supposed to get in
a single call from libcurl is limited by the lowest value of
CURL_MAX_WRITE_SIZE and CURL_MAX_HTTP_HEADER.
When using Sun C compiler the preprocessor somehow inserts an extra space
in front of replaced symbol, breaking CURL_CHECK_DEF macro. To workaround
this, macro CURL_CHECK_DEF now ignores all leading whitespace in front of
symbol substitution result.
Removed the code that striped off the domain name when Curl_gethostname
returned the fully qualified domain name as the function has been
updated to return the un-qualified host name.
Replaced the use of HOSTNAME_MAX as the size of the buffer in the call
to Curl_gethostname with sizeof(host) as this is safer should the buffer
size ever be changed.
Allow (*curl_write_callback) write callbacks to return
CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions
inside the callback itself.
If a socket is larger than FD_SETSIZE, avoid using FD_SET() on the
platforms where this is possible.
Bug: http://curl.haxx.se/bug/view.cgi?id=3413274
Reported by: Tim Starling
When we use binary posts and regular ones intermixed on a single command
line, we cannot do strlen() etc on the data to figure out the length
(when inserting '&' and more). We must therefore keep track of the post
data length. Then we also end up setting the libcurl option with the
known size, so that we don't risk that libcurl will do strlen() on the
data.
This has the minor side-effect that --libcurl source codes now always
will use CURLOPT_POSTFIELDSIZE but I don't consider that terribly
damaging.
Bug: http://curl.haxx.se/bug/view.cgi?id=3413181
Reported by: Taneli Vhkangas
To avoid that the progress meter headers get output between each
transfer, make sure the bits gets kept when (re-)inited.
Reported by: Christopher Stone
I think curl should ignore this case and smtp.c should test for this.
Since RFC-2821 seems to allow a "null reverse-path". Ref. "MAIL
FROM:<>" in section 3.7, page 25.
Fixed Curl_gethostname() so that it always returns the un-qualified
machine name rather than being dependent on the socket provider.
Note: The return of getenv("CURL_GETHOSTNAME") is also parsed in case
the developer / test harness provided a fully qualified domain name as
it's value as well.
Reorder handling of fields to match same order as the one given by current
definition order of 'Configurable' struct fields. Fields currently not handled
marked for further inspection.
Re-enabling MemoryTracking capability on 'src' subdirectory files and torture
tests have uncovered many issues which were going unnoticed in curl tool. So
here we go fixing some of them. Others still remain and should be addressed
ASAP, given that curl tool is used in our test harness also for test server
start verification purposes. There are even non-socket file descriptor leaks.
With this fix, it should work for PolarSSL-1.0.0 (and SVN-1091 trunk)
and retain compatibility with earlier versions. (Tested with 0.14.1)
PolarSSL still doesn't play nicely with curl's CA bundle (we discussed
this before) but I was at least able to retrieve the
https://www.gmail.com/ login page using a modified ca-certificates.crt
file with all 3 versions of PolarSSL.
Zero-copy and "Avoid having to remove/readd handles" are not really
features we think are worthwhile to add. Removed.
SRP features have been added already, removed.
11.9 IPv6 addresses with globbing added
Renamed the variable from 'proto' to 'level' simply because it is not
protocol you set but level and that is the name of the argument used in
man pages and the POSIX documentation of the setsockopt function.
This workarounds old libssh2 versions not properly initializing
some ssh session variables, which would trigger memory debuggers
warnings on memory being used without having been initialized.
The current version of speedcheck.c may disable timeout by setting zero
to Curl_expire. Which is fine using the curl_multi_perform, because it
recheck all timeout internals, but when using custom event poller (like
hiperfifo.c) it may keep stalle connection forever.
Added missing memoryTracking to test cases 560 and 583. If this triggers
leak detection on these, it only means that previously it was going unnoticed.
Calling sclose() both in the child and the parent fools the
socket leak detector into thinking it's been closed twice.
Calling close() in the child instead overcomes this problem. It's
not as portable as the sclose() macro, but this code is highly
POSIX-specific, anyway.
Just internal stuff...
Curl_safefree is now a macro defined in memdebug.h instead of a function
prototyped in url.h and implemented in url.c, so inclusion of url.h is no
longer required in order to simply use Curl_safefree.
Provide definition of macro WHILE_FALSE in setup_once.h in order to allow
other macros such as DEBUGF and DEBUGASSERT, and code using it, to compile
without 'conditional expression is constant' warnings.
The WHILE_FALSE stuff fixes 150+ MSVC compiler warnings.
Ensure existing logic in Curl_resolv_timeout() is not subverted upon getting a
negative timeout from resolve_server(). The timeout in resolve_server() could
be checked to avoid calling Curl_resolv_timeout() with an expired timeout, but
fixing this in this way allows existing logic in resolve_server() to be kept
unchanged.
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb
Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb
Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED
Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE
Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE
Static function wb_ntlm_close renamed to ntlm_wb_cleanup
Static function wb_ntlm_initiate renamed to ntlm_wb_init
Static function wb_ntlm_response renamed to ntlm_wb_response
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
Fixed the order of the preferred SMTP authentication method to:
AUTH CRAM-MD5, AUTH LOGIN then AUTH PLAIN.
AUTH PLAIN should be the last as it slightly more insecure than AUTH LOGIN
as the username and password are sent together - there is no handshaking
between the client and server like there is with AUTH LOGIN.
Previous interfaces for these libcurl internal functions did not allow to tell
apart a legitimate zero size result from an error condition. These functions
now return a CURLcode indicating function success or otherwise specific error.
Output size is returned using a pointer argument.
All usage of these two functions, and others closely related, has been adapted
to the new interfaces. Relative error and OOM handling adapted or added where
missing. Unit test 1302 also adapted.
* Added function comments:
- Curl_ntlm_decode_type2_message
- Curl_ntlm_create_type1_message
- Curl_ntlm_create_type3_message
* Modification of ntlm processing state to NTLMSTATE_TYPE2 is now done
only when Curl_ntlm_decode_type2_message() has fully succeeded.
As a bonus, this lets our MemoryTracking subsystem track zlib operations.
And also fixes a shortcut some zlib 1.2.x versions took using malloc()
instead of calloc(), which would trigger memory debuggers warnings on
memory being used without having been initialized.
Follow-up to commit 5eb2396cd as that wasn't complete.
At times HEADERFUNCTION+HEADERDATA was set only to have only HEADERDATA
set in the subsequent loop which could cause a NULL to get sent as
userdata to 'header_callback' which wasn't made to handle that.
Now HEADERFUNCTION is explicitly set to NULL if it isn't set to the
callback.
As I modified conn->bits.tcpconnect to become an array that holds one
bool for each potential connection all uses of that struct field must
index it correctly.
When using the multi interface, a SOCKS proxy, and a connection that
wouldn't immediately consider itself connected (which my Linux tests do
by default), libcurl would be tricked into doing _two_ connects to the
SOCKS proxy when it setup the data connection and then of course the
second attempt would fail miserably and cause error.
This problem is a regression that was introduced by commit
4a42e5cdaa that was introduced in the 7.21.7 release.
Bug: http://curl.haxx.se/mail/lib-2011-08/0199.html
Reported by: Fabian Keil
Until 2011-08-17 libcurl's Memory Tracking feature also performed
automatic malloc and free filling operations using 0xA5 and 0x13
values. Our own preinitialization of dynamically allocated memory
might be useful when not using third party memory debuggers, but
on the other hand this would fool memory debuggers into thinking
that all dynamically allocated memory is properly initialized.
As a default setting, libcurl's Memory Tracking feature no longer
performs preinitialization of dynamically allocated memory on its
own. If you know what you are doing, and really want to retain old
behavior, you can achieve this compiling with preprocessor symbols
CURL_MT_MALLOC_FILL and CURL_MT_FREE_FILL defined with appropriate
values.
"release-ssl-ssh2-zlib" and "debug-ssl-ssh2-zlib" are two new makefile
targets that build libcurl with MSVC and link with libssh2
Bug: http://curl.haxx.se/bug/view.cgi?id=3388920
Reported by: "kdekker"
Two problems were fixed:
GET_PARAMETER responses that have no body must be 204 response or
properly set length to 0.
One of the <data> sections had the wrong content-length for its
GET_PARAMETER response.
Enabled test 572 again.
IRIX 6.5.24 gcc 3.3 autobuilds fail unittests library compilation due to a
problem related with OpenSSL headers and library versions not matching.
All AIX autobuilds fails unit tests linking against unittests library due to
unittests library being built with no symbols or members. Libtool ?
Strict splitting of http_ntlm.[ch] may trigger 8 compiler warnings when
building with some compilers and strict compiler warnings enabled, depending
on other specific configuration options some could get triggered or not.
Seven are related with 'unused function parameters' and another one with
'var may be used before its value is set'.
For modularity purposes, huge chunks of NTLM existing code is transformed into
functions to allow future internal code reuse.
Resulting three new libcurl private functions:
- Curl_ntlm_create_type1_message()
- Curl_ntlm_create_type3_message()
- Curl_ntlm_decode_type2_message()
Changing static ntlm_sspi_cleanup() into non-static Curl_ntlm_sspi_cleanup()
This 'refactoring' has been prepared by previous commits to allow that this
specific one does not introduce any change to existing code. All existing
goodness and badness previous to this commit should remain the same once it is
applied, the only difference should be that existing code is moved into
functions.
Given the quite big portions of code being moved around, and the importance of
change traceability, this commit has been done in such a way that it is
possible to perform a three-way diff from initial http_ntlm.[ch] to resulting
http_ntlm.[ch] and curl_ntlm.[ch] to actually verify that no functional change
is introduced here.
Notice that Steve Holme has provided several patches, but these included this
refactoring along with 'extra' fixes. I really wanted this 'clean' refactoring
done first, in order to allow discussion or committing of 'extra' fixes on a
case by case basis, so, I had to bite the bullet ;-)
Comments, line adjustments, compiler warning fixes, whatever, may follow
afterwards.
When building on Windows, with CMake and mingw, curl fails to compile
because the CMake build system is not properly looking for the Winsock
libraries
Patch by: Pau Garcia i Quiles
Bug: http://curl.haxx.se/bug/view.cgi?id=3389231
Using this option with an argument being set to one of
none/policy/always instructs libcurl how to deal with GSS
credentials. Or rather how it tells the server that delegation is fine
or not.
Use preprocessor symbol NTLM_BUFSIZE to define private NTLM buffer fixed size.
Use a SessionHandle 'data' pointer variable to ease refactoring.
Update NTLM type-* message structure descriptions.
Fix some more spacing and typos (Steve Holme).
Moved NTLMSSP_SIGNATURE, HOSTNAME_MAX, SHORTPAIR and LONGQUARTET definitions in ready for move to curl_ntlm.c.
Used separate variables for Windows SSPI and native code to ease moving of code to curl_ntlm.c.
Fixed typographical erros where SPPI should be SSPI.
Fixed compilation warnings on 64-bit builds when calling Windows SSPI functions.
Trimmed the newlines to be LF-only. Converted the source to plain C, to
use curl style indents, to compile warning-free with picky options and
fixed the minor fprintf() bug on line 245. Added to makefile.
There are two keywords in cookie headers that don't follow the regular
name=value style: secure and httponly. Still we must support that they
are written like 'secure=' and then treat them as if they were written
'secure'. Test case 31 was much extended by Rob Ward to test this.
Bug: http://curl.haxx.se/bug/view.cgi?id=3349227
Reported by: "gnombat"
A regression where CURLFORM_BUFFER stopped to properly insert the file
name part in the formpart. Bug introduced in commit f851f76857.
Added CURLFORM_BUFFER use to test 554 to verify this.
Bug: http://curl.haxx.se/mail/lib-2011-07/0176.html
Reported by: Henry Ludemann
Add CURL_CHECK_COMPILER as a requirement.
Ensure macro does nothing unless GNU_C or CLANG compiler is used.
This should allow usage of this macro in unforeseen placements.
Drop the pre-release part from this text as we don't use that in
practise since many years.
Update the phrasing to reflect our more strict interpretation:
http://curl.haxx.se/mail/lib-2011-08/0064.html
Allow configure builds to generate src/config-win32.h
Skip checksrc on src/config-win32.h contents already checked at lib/config-win32.h
Allow multiple -W in checksrc.pl
A proxy could be marked 'httpproxy' wrongly before if set with an
environment variable or with the CURLOPT_PROXY option with a socks*://
prefix or similar.
Added test 710 to verify
Bug: http://curl.haxx.se/mail/lib-2011-07/0194.html
Allow compilation of libcurl and curl using BSD-style lwIP on Win32.
In order to compile libcurl and curl with this support it is necessary
to edit files lib/config-win32.h and src/config-win32.h and uncomment
a line to make definition of preprocessor symbol USE_LWIPSOCK visible.
Afterwards you can compile as usual.
In order to use compiled library with BSD-style lwIP TCP/IP stack in
your program it is mandatory that you include lwIP header file <lwip/opt.h>
before including <curl/curl.h> or <curl/multi.h>
Compilation has been verified with lwIP 1.4.0 and contrib-1.4.0 from:
http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.ziphttp://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip
Have fun!
Content-disposition headers can provide file names with semicolons which
previously would be cut off at that point.
Added test case 1311 and 1312 to verify -J.
Bug: http://curl.haxx.se/bug/view.cgi?id=3375603
Reported by: Peter Hjalmarsson
Use preprocessor symbols WINBIND_NTLM_AUTH_ENABLED and WINBIND_NTLM_AUTH_FILE
for Samba's winbind daemon ntlm_auth helper code implementation and filename.
Retain preprocessor symbol USE_NTLM_SSO for NTLM single-sign-on feature
availability implementation independent.
For test harness, prefix NTLM_AUTH environment vars with CURL_
Refactor and rename configure option --with-ntlm-auth to --enable-wb-ntlm-auth[=FILE]
When an easy handle is used to download an URI which has no
Content-Length header (or equivalent) after downloading an URI which
does, the value from the previous transfer is reused and returned by
CURLINFO_CONTENT_LENGTH_DOWNLOAD. This is because the progress flags
(used to determine whether such a header was received) are not reset
between transfers.
Bug: http://curl.haxx.se/bug/view.cgi?id=3370895
When libcurl has said to the server that there's a POST or PUT coming
(with a content-length and all) it has to either deliver that amount of
data or it needs to close the connection before trying a second request.
Adds test case 1129, 1130 and 1131
The bug report is about when used with 100-continue, but the change is
more generic.
Bug: http://curl.haxx.se/mail/lib-2011-06/0191.html
Reported by: Steven Parkes
"test -e" is POSIX but clearly was not supported by the SunOS sh
version, -f is supported and should be a decent equivalent
Bug: http://curl.haxx.se/bug/view.cgi?id=3371574
gssapi.h is used as a header name by Heimdal-style GSSAPI so it would
conflict with a private header using that name, and while renaming the
header I figured we should name the .c file accordingly as well.
Bug: http://curl.haxx.se/mail/lib-2011-07/0071.html
Reported by: Ben Greear
Modern gcc versions (4.6.X) get more picky by default and have started
to warn for unused parameters, but luckily gcc also allows us to mark
them as unused so that we can avoid the warnings.
First, the -J/--remote-header-name was wrongly sorted in the --help
output as pointed out in bug report #3349271.
Then, I changed the format of the texts to follow the man page better in
that it now uses "-A, --long" intead of "-A/--long". I also made all
additional arguments get written as in "-A, --long FILENAME" instead of
the previous "<filename>" style.
Reported by: Herve Amblard
Bug: http://curl.haxx.se/bug/view.cgi?id=3349271
CURLM_CALL_MULTI_PERFORM stopped being a valid return code from
curl_multi_perform back in 7.20.0. All the libcurl tests are ajusted to
this and no longer check for this return code. Makes them simpler.
Autobuild submitters can use this to add some text to their
setup files to describe issues they've found with the build
or tests. This could include laying blame on test failures on
network issues or dependent libraries, explaining away compiler
warnings or providing any additional information that could be
useful to people reviewing and investigating problems with the
publicly available autobuild logs. Note that persistent test
failures that are not issues with curl itself should normally be
fixed by excluding them from the test run instead.
This is an entirely optional field that is not entered by the
user the first time a new build is created.
adding unit test for Curl_llist_move, documenting unit-tested functions
in llist.c, changing unit-test to unittest, replacing assert calls with
abort_unless calls
The CURLFORM_STREAM is documented to only insert a file name (and thus
look like a file upload) in the part if CURLFORM_FILENAME is set, but in
reality it always inserted a filename="" and if CURLFORM_FILENAME wasn't
set, it would insert insert rubbish (or possibly crash).
This is now fixed to work as documented, and test 554 has been extended
to verify this.
Reported by: Sascha Swiercy
Bug: http://curl.haxx.se/mail/lib-2011-06/0070.html
Properly deal with the fact that the last fread() call most probably is
a short read, and when using callbacks in fact all calls can be short
reads. No longer consider a file read done until it returns a 0 from the
read function.
Reported by: Aaron Orenstein
Bug: http://curl.haxx.se/mail/lib-2011-06/0048.html
If a piece is set to use a callback to get the data, it should not be
treated as data. It unfortunately also requires that curl_easy_perform()
or similar has been used as otherwise the callback function hasn't been
figured out and curl_formget won't know how to get the content.
When closing a connection, the speedchecker's timestamp is now deleted
so that it cannot accidentally be used by a fresh connection on the same
handle when examining the transfer speed.
Bug: https://bugzilla.redhat.com/679709
When a time condition isn't met, so that no body is delivered to the
application even though a 2xx response is being read from the server, we
must close the connection to avoid a re-use of the connection to be
completely tricked.
Added test 1128 to verify.
cross-compilation of unit tests static library/programs fails when
libcurl shared library is also built. This might be due to a libtool or
automake issue. In this case we disable unit tests.
When switching to HTTP because a HTTP proxy is being used, the existing
handler is now checked if it already is "compatible". This allows the https
handler remain while other non-http handlers will be redirected.
Bug: http://curl.haxx.se/mail/lib-2011-05/0214.html
Reported by: Jerome Robert
Fix compiler warning: `keycheck' might be used uninitialized in this function.
Fix compiler warning: `keybit' might be used uninitialized in this function.
Introduced the initial setup to allow closesocket callbacks by making
sure sclose() is only ever called from one place in the libcurl source
and still run all test cases fine.
Added test 1126 and 1127 to verify curl's behaviour when If-Modified-Since
is used and a 200 is returned.
The list of test cases in Makefile.am is now sorted numerically.
Made the public headers checksrc compliant
Removed types.h (it's been unused since April 2004)
Made the root makefile do make in include by default as well, so that
TAGS and the checksrc will work better.
The protocol handler's flags field now can set that the protocol
requires a password, so that the set_userpass function doesn't have to
have the specific knowledge of which protocols that do.
Made several functions static
Made one function defined to nothing when RTSP is disabled to avoid
the #ifdefs in code.
Removed explicit rtsp.h includes
Using 'socks5h' as proxy protocol will make it a
CURLPROXY_SOCKS5_HOSTNAME proxy which is SOCKS5 and asking the proxy to
resolve host names. I found no "standard" protocol name for this.
Follow style of GNU layout (cp, mv ...) where options are separated with
comma: -o, --option
Order item alphabetically (by length also): -o, -O, --option
Follow style of GNU layout by moving help related options to the end:
--help, -M, --version
Clarify that the '-', '.', '_' or '~' letters are also not escaped since
they shouldn't according to RFC3986 section 2.3.
This is how this function has behaved since sep 2010, commit
5df13c3173.
Introduce an INIT state for the SSH state machine and set libssh2
non-blocking in that so that it is set properly before
libssh2_session_startup() is called.
Bug: http://curl.haxx.se/mail/archive-2011-05/0001.html
As it is already included by curlbuild.h if it exists on the platform it
was included here superfluously anyway.
Reported by: Dagobert Michelsen
Bug: http://curl.haxx.se/bug/view.cgi?id=3294509
Now use gai_strerror() to get proper error messages when getaddrinfo()
has failed. Detect the function in configure.
Code based on work and suggestions by Jeff Pohlmeyer and Guenter Knauf
Improved library search by check_function_exists_concat() macro:
it does not revert the list of libraries any more.
Improved OpenSSL library search: first find zlib, then search for
openssl libraries that may depend on zlib.
For Unix: openssl libraries can now be detected in nonstandard
locations. Supply CMAKE_LIBRARY_PATH to CMake on command line.
Added installation capability (very basic one yet).
When connecting to a socks or similar proxy we do the proxy handshake at
once when we know the TCP connect is completed and we only consider the
"connection" complete after the proxy handshake. This fixes test 564
which is now no longer considered disabled.
Reported by: Dmitri Shubin
Bug: http://curl.haxx.se/mail/lib-2011-04/0127.html
The make target checksrc now works in the root makefile and in both the
src and lib directories.
It is also run automatically on "all" if configure --enable-debug was
used.
It now scans multiple files and outputs an error+warning count summary
at the end in case at least one was detected.
-D can be used to specify in which dir the files are located
The script now scans for conditions that starts with a space for
if/while/for lines.
For now provide prototypes instead of including the
non-standard normalisation.h which is only available in the
"Internationalized Domain Names Mitigation APIs" download.
asyn-ares.c and asyn-thread.c are two separate backends that implement
the same (internal) async resolver API for libcurl to use. Backend is
specified at build time.
The internal resolver API is defined in asyn.h for asynch resolvers.
Fixed indents, coding conventions and white space edits.
Modified the c-ares completion callback function to again NOT read the
conn data when the ares handle is being taken down as then it may have
been freed already.
For now we directly import the Idn* symbols with the linker;
an upcoming release of OWC will have these added to the import
lib normaliz.lib, and prototypes are added to winnnls.h.
Make sure that files are closed before the post quote commands run as if
they operate on the just transferred file they could otherwise easily
fail.
Patch by: Rajesh Naganathan (edited)
libcurl failed to check the correct struct for HTTPS after CONNECT was
issued to the proxy, so it didn't do the TLS handshake and subsequently
failed the connection. A regression released in 7.21.5 (introduced
around commit 8831000bc0).
Bug: http://curl.haxx.se/mail/lib-2011-04/0134.html
Reported by: Josue Andrade Gomes
It is now possible to use any combination of features without
having to 1st add makefile targets to the main makefile. The
main makefile now passes the 'mingw32-feat1-feat2' as var CFG,
and the ./[lib|src]/Makefile.m32 parses the CFG var to determine
the features to be enabled.
changed windows.h include to system header;
changed obsolete 2nd check for str_w to str_utf8 in order to catch
malloc() failure and avoid a free(NULL);
changed calls to GetLastError() to void to kill unsused var compiler
warnings;
moved one call to GetLastError() into else case so that its only
called when WideCharToMultiByte() really fails.
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
Encoding in HTTP requests (if built zlib enabled). I also renamed
CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
around) to reduce the confusion when we have to encoding options for
HTTP.
--tr-encoding is now the new command line option for curl to request
this, and thus I updated the test cases accordingly.
When TE: is inserted in the request, we must add a "Connection: TE" as
well to be HTTP 1.1 compliant. If a custom Connection: header is passed
in, we must use that and only append TE to it. Test case 1125 verifies
TE: + custom Connection:.
Since this struct member is used in the code to determine what and how
to decode automatically and since it is now also used for compressed
Transfer-Encodings, I renamed it to the more suitable 'auto_decoding'
Transfer-Encoding differs from Content-Encoding in a few subtle ways,
but primarily it concerns the transfer only and not the content so when
discovered to be compressed we know we have to uncompress it. There will
only arrive compressed transfers in a response after we have requested
them with the appropriate TE: header.
Test case 1122 and 1123 verify.
curl-config --version didn't output the correct version string (bug
introduced in commit 0355e33b5f), and unfortunately the test
case 1022 that was supposed to check for this was broken.
This change fixes the test to detect this problem and it fixes the
output.
Bug: http://curl.haxx.se/bug/view.cgi?id=3288727
As we're closing in on the release, I give up on the remaining ones but
I leave them in here for now to try to fix for next release.
I removed the 281 issue about warnings from the statical analyzer scans,
as they seem to be mostly false positives at this point.
The script didn't properly add the -lssh2 link option when it enabled
libssh2 linking where pkg-config isn't found.
Reported by: Saqib Ali
Bug: http://curl.haxx.se/mail/lib-2011-04/0054.html
When checking if an existing RTSP connection is alive or not, the
checkconnection function might be called with a SessionHandle pointer
being NULL and then referenced causing a crash. This happened only using
the multi interface.
Reported by: Tinus van den Berg
Bug: http://curl.haxx.se/bug/view.cgi?id=3280739
In case a client certificate is used, invalidate SSL session cache
at the end of a session. This forces NSS to ask for a new client
certificate when connecting second time to the same host.
Bug: https://bugzilla.redhat.com/689031
* Rename the object object directory from 'objs' to 'BCC_obj' to be in
sync with my previous patch for lib/Makefile.b32.
* Turn off these warnings to keep the build totally silent (with CBuilder-6
that is).
-w-inl 8026 Functions X are not expanded inline.
-w-pia 8060 Possibly incorrect assignment
-w-pin 8061 Initialization is only partially bracketed
(same added in src/Makefile.b32)
* $(MKDIR) and $(RMDIR) have been replaced with the shell-commands 'md'
and 'rd'. When having MingW/Msys programs 'mkdir.exe' and 'rmdir.exe' in
$PATH, this confuses Borland's make and the result (the cleaning etc.) would
not be as expected.
* Removed the preprocessing step; no need for PP_CMD and the .int files.
curl.exe builds fine w/o and the makefile gets simpler.
* Added a target for creating a compressed hugehelp.c if WITH_ZLIB is defined.
It assumes groff, gzip and perl is available if such an "advanced" users
requests it. Okay? BTW. My groff and Perl needs unix-slashes ('/').
Other perls should handle both forms ('/' and '\').
* Rename the object object directory from 'objs' to 'BCC_obj'. I feel
it should be named properly. Ref. Makefile.Watcom where it's called
'WC_Win32.obj'.
* Turn off these warnings to keep the build totally silent (with CBuilder-6
that is).
-w-inl 8026 Functions X are not expanded inline.
-w-pia 8060 Possibly incorrect assignment
-w-pin 8061 Initialization is only partially bracketed
I'm sure the warnings could be fixed the "proper" way or with some added
"#pragma" statements. But that just clutters the sources IMHO.
* $(MKDIR) and $(RMDIR) have been replaced with the shell-commands 'md'
and 'rd'. When having MingW/Msys programs 'mkdir.exe' and 'rmdir.exe' in
$PATH, this confuses Borland's make and the result (the cleaning etc.) would
not be as expected.
* Added a ".path.int = $(OBJDIR)" to tell make where the $(PREPROCESSED)
files are. Why we need the preprocess step in the fist place is beyond me
(Yang?). But I'll leave that for now.
These problems have gotten no interest/feedback from users:
-275 - Introduce a way to avoid sending USER for FTP connections
-288 - bug 3219997 curl rtmp request curl: (55) select/poll returned error
This problem is rather an autoconf bug with little user interest and it
can be worked around with an older autoconf:
-278 - "Configure $as_echo does not work"
This problem is not fixed:
-286 - bug 3214223 Pipelined HTTP requests with a zero-length body broken
Stop the abuse of CURLE_FAILED_INIT as return code for things not being
init related by introducing two new return codes:
CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for
several years. It is used for returning error when something is
attempted to be used but the feature/option was not enabled or
explictitly disabled at build-time. Getting this error mostly means that
libcurl needs to be rebuilt.
CURLE_FAILED_INIT is now saved and used strictly for init
failures. Getting this problem means something went seriously wrong,
like a resource shortage or similar.
CURLE_UNKNOWN_OPTION is the option formerly known as
CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present,
separately defined to be removed in a very distant future). This error
code is meant to be used to return when an option is given to libcurl
that isn't known. This problem would mostly indicate a problem in the
program that uses libcurl.
In my attempts to reduce #ifdefs in code, the SOCKS functions are now
macros when libcurl is built without proxy support and therefore the FTP
code could avoid some #ifs.
The new http_proxy.* files now host HTTP proxy specific code (500+ lines
moved out from http.c), and as a consequence there is a macro introduced
for the Curl_proxyCONNECT() function so that code can use it without
actually supporting proxy (or HTTP) in builds.
1 - make sure to #define macros for cookie functions in the cookie
header when cookies are disabled to avoid having to use #ifdefs in code
using those functions.
2 - move cookie-specific code to cookie.c and use the functio
conditionally as mentioned in (1).
net result: 6 #if lines removed, and 9 lines of code less
Within multi_socket when conn is used as a shorthand, data could be
changed and multi_runsingle could modify the connectdata struct to deal
with. This bug has not been included in a public release.
Using 'conn' like that turned out to be ugly. This change is a partial
revert of commit f1c6cd42f4.
Reported by: Miroslav Spousta
Bug: http://curl.haxx.se/bug/view.cgi?id=3265485
The read callback must return the exact requested amount of data when it
is used for doing TFTP uploads. This is due to how it deals with data
internally. This could/should be fixed but for now we document the
existing behavior.
Reported by: Colin Blair
Bug: http://curl.haxx.se/mail/lib-2011-03/0319.html
When asked to bind the local end of a connection when doing a request,
the code will now disqualify other existing connections from re-use even
if they are connected to the correct remote host.
This will also affect which connections that can be used for pipelining,
so that only connections that aren't bound or bound to the same
device/port you're asking for will be considered.
The RTSP-specific function for checking for "dead" connection is better
located in rtsp.c. The code using this is now written without #ifdefs as
the function call is instead turned into a macro (in rtsp.h) when RTSP
is disabled.
Fixed:
271 - fix the IPv6-working probing to only exist at one place in the code and
only get done once
A problem not repeatable and no proper recipe given and therefore simply
removed for now until we hear something else:
282 - 100 Continue responses should return the "final" HTTP response code:
"Getting the HTTP response code following a 100 Continue"
Move ipv6-functional-probe into a single function that is used from all
places that need to know.
Make the probe function store the result in a static variable so that
subsequent invokes just returns the previous result and won't have to
probe again.
This is a new documentation for the source tree. This information has
been present since a long time at
http://curl.haxx.se/mail/etiquette.html but now it is put into a plain
text version too for wider distribution. The web version will be
automatically generated from this source document.
Curl_posttransfer is called too soon to add the final new line.
Moved the new line logic to pgrsDone as there is no more call to
update the progress status after this call.
Reported by: Dmitri Shubin <sbn_at_tbricks.com>
http://curl.haxx.se/mail/lib-2010-12/0162.html
When libcurl sends a HTTP request on a re-used connection and detects it
being closed (ie no data at all was read from it), it is important to
rewind if any data in the request was sent using the read callback or
was read from file, as otherwise the retried request will be broken.
Reported by: Chris Smowton
Bug: http://curl.haxx.se/bug/view.cgi?id=3195205
When NSS-powered libcurl connected to a SSL server with
CURLOPT_SSL_VERIFYPEER equal to zero, NSS remembered that the peer
certificate was accepted by libcurl and did not ask the second time when
connecting to the same server with CURLOPT_SSL_VERIFYPEER equal to one.
This patch turns off the SSL session cache for the particular SSL socket
if peer verification is disabled. In order to avoid any performance
impact, the peer verification is completely skipped in that case, which
makes it even faster than before.
Bug: https://bugzilla.redhat.com/678580
The PROT_* set of internal defines for the protocols is no longer
used. We now use the same bits internally as we have defined in the
public header using the CURLPROTO_ prefix. This is for simplicity and
because the PROT_* prefix was already used duplicated internally for a
set of KRB4 values.
The PROTOPT_* defines were moved up to just below the struct definition
within which they are used.
The protocol handler struct got a 'flags' field for special information
and characteristics of the given protocol.
This now enables us to move away central protocol information such as
CLOSEACTION and DUALCHANNEL from single defines in a central place, out
to each protocol's definition. It also made us stop abusing the protocol
field for other info than the protocol, and we could start cleaning up
other protocol-specific things by adding flags bits to set in the
handler struct.
The "protocol" field connectdata struct was removed as well and the code
now refers directly to the conn->handler->protocol field instead. To
make things work properly, the code now always store a conn->given
pointer that points out the original handler struct so that the code can
learn details from the original protocol even if conn->handler is
modified along the way - for example when switching to go over a HTTP
proxy.
The non-blocking connect improvement for IMAP showed that we didn't
properly define the Curl_ssl_connect_nonblocking function for non-SSL
builds.
Reported by: Tor Arntsen
Only download and convert the certdata to the ca-bundle.crt if Mozilla
changed the data
The Perl LWP module (which in a bit of a circular reference is used by
mk-ca-bundle.pl) is now indirectly using this script. I made this small
tweak to make it easier to automatically maintain the generated
ca-bundle.crt file in version control.
Some protocols have to call the underlying functions without regard to
what exact state the socket signals. For example even if the socket says
"readable", the send function might need to be called while uploading,
or vice versa. This is the case for libssh2 based protocols: SCP and
SFTP and we now introduce a define to set those protocols and we make
the multi interface code aware of this concept.
This is another fix to make test 582 run properly.
As a new state recently was added to the IMAP state machine it has to be
in the array of names as well as otherwise libcurl crashes when a debug
version runs...
For uploads we want to use the _sending_ function even when the socket
turns out readable as the underlying libssh2 sftp send function will
deal with both accordingly. This is what the cselect_bits magic is for.
Fixes test 582.
These issues are now addressed:
276 - Karl M's vc makefile patch
277 - The "Stall when uploading to sftp using multi interface" bug
279 - curl_multi_remove_handle() crashes
280 - Marcus Sundberg's gss patch
Make GSS authentication work when a curl handle is reused for multiple
authenticated requests, by always setting negdata->state in
output_auth_headers().
Signed-off-by: Marcus Sundberg <marcus.sundberg@aptilo.com>
This test case is meant to verify that the logic in commit
60172a0446 actually works. This test failed for me before that
change and it works after it.
When using the multi interface and a handle using SFTP was removed very
early on, we would get a segfault due to the code assumed data was there
that hadn't yet been setup.
Bug: http://curl.haxx.se/mail/lib-2011-03/0066.html
Reported by: Saqib Ali
recvfrom in bionic (the android libc) deviates from POSIX and uses a
const in the 5th argument ("const struct sockaddr *") so the check now
tests for that as well.
Both SFTP and SCP are protocols that need to shut down stuff properly
when the connection is about to get torned down. The primary effect of
not doing this shows up as memory leaks (when using SCP or SFTP with the
multi interface).
This is one of the problems detected by test 582.
As we know how much to send, we can and should stop once we've sent that
much data as it avoids having to rely on other mechanisms to detect the
end.
This is one of the problems detected by test 582.
Reported by: Henry Ludemann <misc@hl.id.au>
When using the multi_socket API to do SFTP upload, it is important that
we set a quick expire when leaving the SSH_SFTP_UPLOAD_INIT state as
there's nothing happening on the socket so there's no read or write to
wait for, but the next libssh2 API function needs to be called to get
the ball rolling.
This is one of the problems detected by test 582.
Reported by: Henry Ludemann <misc@hl.id.au>
All C and H files now (should) feature the proper project curl source
code header, which includes basic info, a copyright statement and some
basic disclaimers.
CyaSSL (available from git@github.com:cyassl/cyassl.git) has been
added to the SSL abstraction layer.
To test:
1) git CyaSSL sources
2) autoreconf -i
3) ./configure --disable-static
4) make
5) sudo make install
6) autoreconf -i
7) git curl sources (and this patch)
8) ./configure --disable-shared --with-cyassl --without-ssl --enable-debug
9) make
10) normal testing
Please send questions or comments to todd@yassl.com .
Stress that it is for client certificates and then mention that it also
works for all other SSL-based protocols apart from HTTPS and
FTPS. Namely POP3S, IMAPS and SMTPS for now.
Add test 582 for uploading a file using sftp and the multi interface.
(Patch and test slightly tweaked by Daniel Stenberg)
Initially marked as disabled until it is fixed in the source.
libssh2_knownhost_readfile() returns a negative value on error or
otherwise number of parsed known hosts - this was previously not
documented correctly in the libssh2 man page for the function.
Bug: http://curl.haxx.se/mail/lib-2011-02/0327.html
Reported by: murat
The stopserver function would append pids to kill and could append them
without separating them with space properly. The result would be a very
large number that by (some implementations of) kill would be interpreted
as a negative number and that process group would be wiped...
Bug: http://curl.haxx.se/bug/view.cgi?id=3188836
Reported by: Greg Pratt
Removed the "netrc_debug" keyword replaced with --netrc-file additions.
Removed the debug code from Curl_parsenetrc as it is superseeded by
--netrc-file.
This enables people to specify a path to the netrc file to use.
The new option override --netrc if both are present. However it
does follow --netrc-optional if specified.
After a request times out, the connection wasn't properly closed and
prevented to get re-used, so subsequent transfers could still mistakenly
get to use the previously aborted connection.
When failing to connect the protocol during the CURLM_STATE_PROTOCONNECT
state, Curl_done() has to be called with the premature flag set TRUE as
for the pingpong protocols this can be important.
When Curl_done() is called with premature == TRUE, it needs to call
Curl_disconnect() with its 'dead_connection' argument set to TRUE as
well so that any protocol handler's disconnect function won't attempt to
use the (control) connection for anything.
This problem caused the pingpong protocols to fail to disconnect when
STARTTLS failed.
Reported by: Alona Rossen
Bug: http://curl.haxx.se/mail/lib-2011-02/0195.html
Introducing a few CURL_SOCKOPT* defines for conveniance. The new
CURL_SOCKOPT_ALREADY_CONNECTED signals to libcurl that the socket is to
be treated as already connected and thus it will skip the connect()
call.
It turns out some systems rely on the gmtime or gmtime_r to be defined
already in the system headers and thus my "precaution" redefining of
them only caused trouble. They are now removed.
Since the feature requires support for TCP_KEEPIDLE and TCP_KEEPINTVL to
function as documented, it now warns if that support is missing when the
option is used.
On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It
was only being raised when an internal error occurred while allocating
or setting the GnuTLS SRP client credentials struct. For TLS
authentication failures, the general CURLE_SSL_CONNECT_ERROR seems
appropriate; its error string already includes "passwords" as a possible
cause. Having a separate TLS auth error code might also cause people to
think that a TLS auth failure means the wrong username or password was
entered, when it could also be a sign of a man-in-the-middle attack.
When the callback returns an error, this function must make sure to return
CURLE_ABORTED_BY_CALLBACK properly and not CURLE_OK as before to allow the
callback to properly abort the operation.
The main has not been updated from some time and is out of sync with
the code. The code is now tested by several test cases so no need for
a seperate code path.
Instead of polluting many places with #ifdefs, we create a single place
for this function, and also check return code properly so that a NULL
pointer returned won't cause problems.
The official Mozilla page at http://www.mozilla.org/projects/security/certs/
points out a new place as the "proper" place to get Mozilla's CA certs from
so this script is now updated to use that instead.
Reported by: Daniel Mentz
The official Mozilla page at
http://www.mozilla.org/projects/security/certs/ points out a new place
as the "proper" place to get Mozilla's CA certs from so this script is
now updated to use that instead.
Reported by: Daniel Mentz
The code in the toofast state needs to first recalculate the values
before it uses them again since it may have been a while since it last
did it when it reaches this point.
This will be used by file_do() and Curl_readwrite() as a unified method
of checking to see if a remote document meets the supplied
CURLOPT_TIMEVAL and CURLOPT_TIMECONDITION.
Signed-off-by: Dave Reisner <d@falconindy.com>
"6.7 What are my obligations when using libcurl in my commercial apps?"
got the piece about what exactly "in all copies" mean to a user of the
code.
This interpretation is based on what other MIT-like licenses have made
more explicit.
This is a separate makefile for MSVC builds. It is deliberately put in
another dir than src/ and lib/ to allow a different build experience
than the previous - at least during a period. Eventually we should
unify.
When this callback is called due to the destruction of the ares handle,
the connection pointer passed in as an argument may no longer pointing
to valid data and this function doesn't need to do anything with it
anyway so we make sure it doesn't.
Bug: http://curl.haxx.se/mail/lib-2011-01/0333.html
Reported by: Vsevolod Novikov
The HTTP parser allocated memory on each received Location: header
without properly freeing old data. Starting now, the code only considers
the first Location: header and will blissfully ignore subsequent ones.
Bug: http://curl.haxx.se/bug/view.cgi?id=3165129
Reported by: Martin Lemke
... to not make the connection between the tool and the libcurl used
tighter than necessary, the tlsauth options are now always present but
if the used libcurl doesn't have TLSAUTH support it will return failure.
Also, replaced strncmp() with strequal to get case insensitive matching.
Extended the intial HTTP protcol part and added a mention of --trace and
--trace-ascii.
Replaced most URLs in the text to use example.com instead of all the
made up strange names.
Shortened a bunch of lines.
... and update the curl.1 and curl_easy_setopt.3 man pages such that
they do not suggest to use an OpenSSL utility if curl is not built
against OpenSSL.
Bug: https://bugzilla.redhat.com/669702
The idea that the protocol and socktype is part of name resolving in the
libc functions is nuts. We keep the name resolver functions assume
TCP/STREAM and we make sure that when we want to connect to a UDP
service we use the correct UDP/DGRAM set instead. This bug was because
the ->protocol field was not always set correctly.
This bug was only affecting ipv6-disabled non-cares non-threaded builds.
Bug: http://curl.haxx.se/bug/view.cgi?id=3154436
Reported by: "dperham"
This makes it possible to skip the call to unit_stop() in such
cases. Also use Curl_safefree() in unit test 1302 so it will
pass the memory torture test.
The CheckTypeSize module that comes with CMake 2.6.2 and above does
everything we need and also supports cross-compiling. Avoid duplicating
an older version of it here. This also fixes a cross-compiling error
because the old line
include ("${CMAKE_MODULE_PATH}/CheckTypeSize.cmake")
failed because CMAKE_MODULE_PATH is a search path and not a directory.
Signed-off-by: Brad King <brad.king@kitware.com>
The UNITTEST_START and UNITTEST_STOP defines needed to do a new brace
level so that test cases can declare variables fine and still remain
fine C89 code.
The test runner script now knows if unittests can run and the unit test
setup file says it is one. I also made runtests.pl deal with no
<command> tag set, so that the description file can get even simpler.
When configure --enable-debug has been used, all files in lib/ are now
built twice and a separate static library crafted for unit-testing will
be linked. The unit tests in the tests/unit subdir will use that
library.
Since some systems don't have PATH_MAX and it isn't that clever to
assume a fixed maximum path length, the code now allocates buffer space
instead of using stack.
Reported by: Samuel Thibault
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=608521
Sending "pwd" as a QUOTE command only sent the reply to the
DEBUGFUNCTION. Now it also sends an FTP-like header to the header
callback to allow similar operations as with FTP, and apps can re-use
the same parser.
configure.ac: Test harness libhostname library will not be built for Windows.
runtests.pl: LD_PRELOAD mechanism will not be used to load libhostname
library on operating systems which lack LD_PRELOAD support.
When built IPv6-enabled, we could do Curl_done() with one of the two
resolves having returned already, so when ares_cancel() is called the
resolve callback ends up doing funny things (sometimes resulting in a
segfault) since it would try to actually store the previous resolve even
though we're shutting down the resolve.
This bug was introduced in commit 8ab137b2bc so it hasn't been
included in any public release.
Bug: http://curl.haxx.se/bug/view.cgi?id=3145445
Reported by: Pedro Larroy
Providing multiple dots in a series in the domain field (domain=..com) could
trick the cookie engine to wrongly accept the cookie believing it to be
fine. Since the tailmatching would then match all .com sites, the cookie would
then be sent to all of them.
The code now requires at least one letter between each dot for them to be
counted. Edited test case 61 to verify this.
When using the multi interface and connecting to a host name that
resolves to multiple IP addresses, there was no logic that made it
continue to the next IP if connecting to the first address times
out. This is now corrected.
The info about pipe status and expire cleared are clearly debug-related
and not anything mere mortals will or should care about so they are now
ifdef'ed DEBUGBUILD
They were all wrong previously since none used the <brackets> they
should for MAIL FROM. Now libcurl adds them itself if the app doesn't so
they end up wrong less easy.
Similar to what is done already for RCPT TO, the code now checks for and
adds angle brackets (<>) around the email address that is provided for
CURLOPT_MAIL_RCPT unless the app has done so itself.
Make sure that Curl_cache_addr() errors are propagated to callers of
loadhostpairs().
(this loadhostpairs function caused a scan-build warning due to the
'dns' variable getting assigned but never used)
Doing curlx_strtoofft() on the size just to figure out the end of it
causes a compiler warning since the result wasn't used, but is also a
bit of a waste.
Since the original `conn' pointer was used after the `connectdata' it
points to has been closed/cleaned up by Curl_reconnect_request it caused
a crash. We must make sure to use the newly created connection instead!
URL: http://curl.haxx.se/mail/lib-2010-12/0202.html
Make the c-ares resolver code ask for both IPv4 and IPv6 addresses when
IPv6 is enabled.
This is a workaround for the missing ares_getaddrinfo() and is a lot
easier to implement.
Note that as long as c-ares returns IPv4 addresses when IPv6 addresses
were requested but missing, this will cause a host's IPv4 addresses to
occur twice in the DNS cache.
URL: http://curl.haxx.se/mail/lib-2010-12/0041.html
Add a simple SMTP example program, patterned after some of the existing
examples, and the curl application.
This version addresses issues raised by David Woodhouse on comments in
the simplesmtp.c example.
The SSL_SERVER_VERIFY_LATER bit in the ssl_ctx_new() call allows the
code to verify the peer certificate explicitly after the handshake and
then the "data->set.ssl.verifypeer" option works.
The public axTLS header (at least as of 1.2.7) redefines the memory
functions. We #undef those again immediately after the public header to
limit the damage. This should be fixed in axTLS.
Failed HTTPS tests: 301, 306, 311, 312, 313, 560
311, 312 need more detailed error reporting from axTLS.
313 relates to CRL, which hasn't been implemented yet.
Added axTLS to autotool files and glue code to misc other files.
axtls.h maps SSL API functions, but may change.
axtls.c is just a stub file and will definitely change.
The function that checks if pipelining is possible now requires the HTTP
bit to be set so that it doesn't mistakenly tries to do it for other
protocols.
Bug: http://curl.haxx.se/mail/lib-2010-12/0152.html
Reported by: Dmitri Shubin
The generic timeout code must not check easy handles that are already
completed. Going to completed (again) within there risked decreasing the
number of alive handles again and thus it could go negative.
This regression bug was added in 7.21.2 in commit ca10e28f06
ossl_connect_common() now checks whether or not 'struct
connectdata->state' is equal 'ssl_connection_complete' and if so, will
return CURLE_OK with 'done' set to 'TRUE'. This check prevents
ossl_connect_common() from creating a new ssl connection on an existing
ssl session which causes openssl to fail when it tries to parse an
encrypted TLS packet since the cipher data was effectively thrown away
when the new ssl connection was created.
Bug: http://curl.haxx.se/mail/lib-2010-11/0169.html
It helps to prevent a hangup with some FTP servers in case idle session
timeout has exceeded. But it may be useful also for other protocols
that send any quit message on disconnect. Currently used by FTP, POP3,
IMAP and SMTP.
When looping in this function and checking for the timeout being
expired, it was not updating the reference time when calculating the
timediff since previous round which made it think each subsequent loop
to have taken longer than it actually did.
I also modified the function to use the generic Curl_timeleft() function
instead of the custom logic.
Bug: http://curl.haxx.se/bug/view.cgi?id=3112579
Ensure that spurious results from system's getaddrinfo() ares not propagated
by Curl_getaddrinfo_ex() into the library.
Also ensure that the ai_addrlen member of Curl_getaddrinfo_ex()'s output linked
list of Curl_addrinfo structures has appropriate family-specific address size.
On Windows, translate WSAGetLastError() to errno values as GNU
TLS does it internally, too. This is necessary because send() and
recv() on Windows don't set errno when they fail but GNU TLS
expects a proper errno value.
Bug: http://curl.haxx.se/bug/view.cgi?id=3110991
Temporarily, When cross-compiling with gcc 3.0 or later, enable strict aliasing
rules and warnings. Given that cross-compiled targets autobuilds do not run the
If --librtmp was specified but pkg-config could not find the librtmp
file, we would have undefined symbols when linking curl.
We prevent this error by disabling this case as suggested on the mailing
list.
When no timeout is set, we call the socket_ready function with a timeout
value of 0 during handshake, which makes it loop too much/fast in this
function. It also made this function return CURLE_OPERATION_TIMEDOUT
wrongly on a slow handshake.
However, the particular bug report that highlighted this problem is not
solved by this fix, as this fix only makes the more proper error get
reported instead.
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=594150
Reported by: Johannes Ernst
While changing Curl_sec_read_msg to accept an enum protection_level
instead of an int, I went ahead and fixed the usage of the associated
fields.
Some code was assuming that prot_clear == 0. Fixed those to use the
proper value. Added assertions prior to any code that would set the
protection level.
This script is the start of a helper tool that scans a source code and
outputs the most recent libcurl version it finds symbols for. Meaning
that if there's no conditions in the code, that's the earliest libcurl
version the scanned code requires.
It is not added to the Makefile.am yet as it is still a bit crude, but
I'm committing it to keep it and allow us to work on it.
This is the advised way of checking for errors in the GSS-API RFC.
Also added some '\n' to the error message so that they are not mixed
with other outputs.
This is a meta symbol. OR this value together with a single specific
auth value to force libcurl to probe for un-restricted auth and if not,
only that single auth algorithm is acceptable.
For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl
first probe for what method to use, but yet only consider Digest to be
acceptable.
Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make
libcurl explicitly use Digest right away and not do any probing.
The IP version choice was previously only in the UserDefined struct
within the SessionHandle, but since we sometimes alter that option
during a request we need to have it on a per-connection basis.
I also moved more "init conn" code into the allocate_conn() function
which is designed for that purpose more or less.
Instead of reopening the downloaded file, fsetxattr uses the (already
open) file descriptor to attach extended attributes. This makes the
procedure more robust against errors caused by moved or deleted files.
CURLOPT_RESOLVE is a new option that sends along a curl_slist with
name:port:address sets that will populate the DNS cache with entries so
that request can be "fooled" to use another host than what otherwise
would've been used. Previously we've encouraged the use of Host: for
that when dealing with HTTP, but this new feature has the added bonus
that it allows the name from the URL to be used for TLS SNI and server
certificate name checks as well.
This is a first change. Surely more will follow to make it decent.
If the query result has a binary attribute, the binary attribute is
base64 encoded. But all following non binary attributes are also base64
encoded which is wrong.
This is a test (LDAP server is public).
curl
ldap://x500.bund.de:389/o=Bund,c=DE?userCertificate,certificateSerialNumber?sub
?cn=*Woehleke*
setxattr is a glibc call to set extended attributes, so configure now
checks for it and the code is adapted to only build when the
functionality is present.
It is often convinient to track back the source of a once downloaded
file; this patch makes curl store the source URL and other metadata
alongside the retrieved file by using the extended attributes (if
supported by the file system and enabled by --xattr).
Test 580 is removed again for two reasons:
1) Some compilers aren't satisfied by just a data variable called 'test'
when first.o wants a function called 'test'. The Solaris compiler says
"ld: warning: symbol `test' has differing types:" while the AIX compiler
downright rejects it.
2) Test case 1119 that was added after this test is way more complete
and cover everything test 580 does and more without introducing the same
problems.
If you use a custom Host: name in a request to a SSL server, libcurl
will now use that given name when it verifies the server certificate to
be correct rather than using the host name used in the actual URL.
When given a custom host name in a Host: header, we can use it for
several different purposes other than just cookies, so we rename it and
use it for SSL SNI etc.
An example application source code sending SMTP mail with the multi
interface. It is based on the code Alona Rossen provided, which in turn
is based on existing example/test code, and I converted it even more
into a decent example with a fair multi API use, put the info required
to edit at the top and I added some comments.
If a command is set type="perl", it can now specify a perl program that will
be run instead of an ordinary curl or built tool.
A perl test automatically disables memory and valgrind debugging.
This new script scans for all enums and #defines used by the curl/curl.h
and curl/multi.h headers. Then it reads all symbols mentioned in
symbols-in-vesions and make sure that there's no entries missing in
there. It then proceeds to verify that the entries that
symbols-in-vesions mentions but aren't found in the sources are truly
documented as removed.
This script is used in the new test case 1119
I've developed a script I call symbol-scan.pl that scans the curl.h and
multi.h header files and compare the symbols it finds in there with the
symbols symbols-in-versions documents and outputs a report on the
differences. Using this I've dug through the history to fill up
symbols-in-versions with all the symbols my script found mismatches for.
I will commit symbol-scan.pl separatly and think of a way to put it to
use in the build/tests so that we from now on will get this in-sync
check automatically.
The new perl script mk580.pl generates a C table in a fresh source file
named lib580.c and if that compiles fine we know that the file
docs/libcurl/symbols-in-versions at least doesn't include any symbols
that are misspelled.
An additional feature would be to somehow scan curl/curl.h and compare
with symbols-in-versions to see if there are symbols missing.
Some FTP servers (e.g. Pure-ftpd) end up hanging if we close the data
connection before transferring all the requested data. If we send ABOR
in that case, it prevents the server from hanging.
Bug: https://bugzilla.redhat.com/643656
Reported by: Pasi Karkkainen, Patrick Monnerat
These haven't worked in at least 8 years due to missing source
files, and most active RiscOS developers these days apparently
cross-compile anyway.
Signed-off-by: James Bursa <james@zamez.org>
In libssh2 1.2.8, libssh2_session_handshake() replaces
libssh2_session_startup() to fix the previous portability problem with
the socket type that was too small for win64 and thus easily could cause
crashes and more.
It is a bad idea to use the public prefix used by another library and
now we realize that libssh2 introduces a symbol in the upcoming version
1.2.8 that conflicts with our static function named libssh2_free.
When failing to build form post due to an error, the code now does a
proper failf(). Previously libcurl would report an error like "failed
creating formpost data" when a file wasn't possible to open which was
not easy for users to figure out.
I also lower cased a function name to be named more curl-style and
removed some unnecessary code.
The URL parser got a little stricter as it now considers a ? to be a
host name divider so that the slightly sloppier URLs work too. The
problem that made me do this change was the reported problem with an URL
like: www.example.com?email=name@example.com This form of URL is not
really a legal URL (due to the missing slash after the host name) but is
widely accepted by all major browsers and libcurl also already accepted
it, it was just the '@' letter that triggered the problem now.
The side-effect of this change is that now libcurl no longer accepts the
? letter as part of user-name or password when given in the URL, which
it used to accept (and is tested in test 191). That letter is however
mentioned in RFC3986 to be required to be percent encoded since it is
used as a divider.
Bug: http://curl.haxx.se/bug/view.cgi?id=3090268
In order to avoid for example the pingpong protocols to issue STARTTLS
(or equivalent) even though there's no SSL support built-in.
Reported by: Sune Ahlgren
Bug: http://curl.haxx.se/mail/archive-2010-10/0045.html
Some options, such as the automatic decompression and some SSL related
ones now will bail out if the underlying libcurl doesn't have support
for the particular feature needed.
Do not match the trailing '\n' in the regular expression as this would
make us dump a ) parenthesis on a new line.
This fixes the following error:
would get transformed into:
)
Bug: http://curl.haxx.se/mail/lib-2010-10/0065.html
Reported by: Dimitre Dimitrov
If the filename contains a backslash, only use filename portion. The
idea is that even systems that don't handle backslashes as path
separators probably want that path removed for convenience.
This flaw is considered a security problem, see the curl security
vulnerability http://curl.haxx.se/docs/adv_20101013.html
As the change in 5f0ae7a062 added a precaution against negative
file sizes that for some reason managed to get returned, this change now
introduces the same check at the second place in the code where the file
size from the libssh2 stat call is used.
This check might not be suitable for a 32 bit curl_off_t, but libssh2.h
assumes long long to work and to be 64 bit so I believe such a small
curl_off_t will be very unlikely to occur in the wild.
Having an open brace without a closing brace caused a segfault.
Having a closing brace too many caused a silent error to occur, which
caused curl to bail out and return an error code but no error message
was shown. It does now!
All error message outputs no longer wrongly get _two_ newlines written
after the error message.
Reported by: Vlad Ureche
Bug: http://curl.haxx.se/bug/view.cgi?id=3083942
The invocation of autoconf's AC_PATH_PROG( ) is not quite right for
finding curl-config. This fix corrects the negative case (where
curl-config is not found).
"261 - configure and libidn" is removed from the list since Julien
Chaffraix tried to repeat it but failed and the reporter did not return
to provide further details.
Reported by: Lyndon Hill
Bug: http://curl.haxx.se/mail/lib-2010-07/0029.html
The macro provides a --with-libcurl option that expects a PREFIX to be
specified and not actually a "directory" in which libcurl will be found.
This now spells that out more clearly.
Reported by: Dan Locks
Bug: http://curl.haxx.se/bug/view.cgi?id=3079891
Renamed SDK_* to NDK_*; made NDK_* defines overwriteable from
environment; removed now obsolete YACC macro;
moved some curl_config.h defines to IPv6 section since they
are only needed when IPv6 is enabled - this makes libcurl compile
with older NDKs too which were not IPv6-aware.
We forgot to release the buffer passed to gss_init_sec_context.
The previous logic was difficult to read as we were reusing the same
variable (gssbuf) for both input buffer and output buffer. Splitted the
logic in 2 variables to better underline who needs to be released.
Also made the code break at 80 lines.
This fixes a memory leak related to the GSS-API code.
Added a krb5_init and krb5_end functions. Also removed a work-around
the lack of proper initialization of the GSS-API context.
It was pointed out that the special case libcurl did for 416 was
incorrect and wrong. 416 is not really different to other errors so the
response body must be handled like for other errors/http responses.
Reported by: Chris Smowton
Bug: http://curl.haxx.se/bug/view.cgi?id=3076808
This delays between write operations, hopefully making it easier
to spot problems where libcurl doesn't flush the socket properly
before waiting for the next response.
It is still not clarified exactly why this happens, but libssh2
sometimes report a negative file size for the remote SFTP file and that
deeply confuses libcurl (or crashes it) so this precaution is added to
avoid badness.
Reported by: Ernest Beinrohr
Bug: http://curl.haxx.se/bug/view.cgi?id=3076430
all multi and hiper examples:
* don't loop curl_multi_perform calls, that was <7.20.0 style, currently
the exported multi functions will not return CURLM_CALL_MULTI_PERFORM
all hiper examples:
* renamed check_run_count to check_multi_info
* don't compare current running handle count with previous value, this
was the wrong way to check for finished requests, simply call
curl_multi_info_read
* it's also safe to call curl_multi_remove_handle inside the
curl_multi_info_read loop.
ghiper.c:
* replaced curl_multi_socket (that function is marked as obsolete) calls
with curl_multi_socket_action calls (as in hiperfifo.c and
evhiperfifo.c)
ghiper.c and evhiperfifo.c:
* be smart as hiperfifo.c, don't do uncessary curl_multi_* calls in
new_conn and main
Remove a leak seen on Kerberos/MIT (gss_OID is copied internally and
we were leaking it). Now we just pass NULL as advised in RFC2744.
|tmp| was never set back to buf->data.
Cleaned up Curl_sec_end to take into account failure in Curl_sec_login
(where conn->mech would be NULL but not conn->app_data or
conn->in_buffer->data).
Following a change in the way socket handler are registered, the custom
recv and send method were conditionaly registered.
We need to register them everytime to handle the ftp security
extensions.
Re-added the clear text handling in sec_recv.
Curl_sec_login was returning the opposite result that the code in ftp.c
was expecting. Simplified the return code (using a CURLcode) so to see
more clearly what is going on.
The functions Curl_disconnect() and Curl_done() are both used within the
scope of a single request so they cannot be allowed to use
Curl_expire(... 0) to kill all timeouts as there are some timeouts that
are set before a request that are supposed to remain until the request
is done.
The timeouts are now instead cleared at curl_easy_cleanup() and when the
multi state machine changes a handle to the complete state.
The date format in RFC822 allows that the seconds part of HH:MM:SS is
left out, but this function didn't allow it. This change also includes a
modified test case that makes sure that this now works.
Reported by: Matt Ford
Bug: http://curl.haxx.se/bug/view.cgi?id=3076529
tftpd-hpa has a bug where it will send an incorrect ack when the block
counter wraps and tftp options have been sent. Work around that by
accepting an ack for 65535 when we're expecting one for 0.
- |fd| is now a curl_socket_t and |len| a size_t to avoid conversions.
- Added 2 FIXMEs about the 2 unsigned -> signed conversions.
- Included 2 minor changes to Curl_sec_end.
- Renamed it to do_sec_send as it is the function doing the actual
transfer.
- Do not return any values as no one was checking it and it never
reported a failure (added a FIXME about checking for errors).
- Renamed the variables to make their use more specific.
- Removed some casts (int -> curl_socket_t, ...)
- Avoid doing the htnl <-> nthl twice by caching the 2 results.
- Renamed the variables name to better match their intend.
- Unified the |decoded_len| checks.
- Added some FIXMEs to flag some improvement that did not go in this
change.
- Removed sec_prot_internal as it is now inlined in the function (this removed
a redundant check).
- Changed the prototype to return an error code.
- Updated the method to use the new ftp_send_command function.
- Added a level_to_char helper method to avoid relying on the compiler's
bound checks. This default to the maximum security we have in case of a
wrong input.
Tighten the type of the |data| parameter to avoid a cast. Also made
it const as we should not modify it.
Added a DEBUGASSERT on the size to be written while changing it.
To do so, made block_read call Curl_read_plain instead of read.
While changing them renamed block_read to socket_read and sec_get_data
to read_data to better match their function.
Also fixed a potential memory leak in block_read.
... for example when LDAP is not compiled.
Fixed the logic to match the rest of the options' message that is we
update the default message only if the option is not disabled after the
different checks.
Reported by: Guenter Knauf
Obviously, browsers ignore a colon without a following port number. Both
Firefox and Chrome just removes the colon for such URLs. This change
does not remove the colon for URLs sent over a HTTP proxy, so we should
consider doing that change as well.
Reported by: github user 'kreshano'
curl_easy_duphandle() was not properly duping the ares channel. The
ares_dup() function was introduced in c-ares 1.6.0 so by starting to use
this function we also raise the bar and require c-ares >= 1.6.0
(released Dec 9, 2008) for such builds.
Reported by: Ning Dong
Bug: http://curl.haxx.se/mail/lib-2010-08/0318.html
1) PPC64 appears to be an 10.5 only supported architecture, so I
forced 10.5 for 64bit if there is a need for PPC64, else 64bit only
does x86_64
2) proper "make clean" after every ./configure. fixes a bug where
subsequent runs the 32bit do not get compiled
3) Added a version numbering curl-$VERSION} rather than the "stock standard" A
librtmp is often statically linked and using sub dependencies like
OpenSSL, so we need to make sure we can actually link with it properly
before enabling it. Otherwise we easily end up trying to link with a
RTMP lib that fails.
1 - libcurl assumes that there are gcrypt functions available when
GnuTLS is.
2 - GnuTLS can be built to use libnettle instead as crypto library,
which breaks assumption (1)
This change makes configure make sure that if GnuTLS is requested and
detected, it also makes sure that gcrypt is present or it errors
out. This is mostly a way to make the user more aware of this flaw, the
correct fix would be to detect which crypto layer that is in use and
adapt our code to use that instead of blindly assuming gcrypt.
Reported by: Michal Gorny
Bug: http://curl.haxx.se/bug/view.cgi?id=3071038
If built without HTTP or proxy support it would cause a compiler warning
due to the unused variable. I moved the declaration of it into the only
scope it is used.
bool_false is the internal name used in the setup_once.h definition
we fall back to for non-C99 non-stdbool systems, it's not the actual
name to use in assignments (we use bool_false, bool_true there to
avoid global namespace problems, see comment in setup_once.h).
The correct C99 value to use is 'false', but let's use FALSE as
used elsewhere when assigning to bits.close. FALSE is set equal
to 'false' in setup_once.h when possible.
This fixes a build problem on C99 targets.
As of curl-7.21.1 tunnelling ldap queries through HTTP Proxies is not
supported. Actually if --proxytunnel command-line option (or equivalent
CURLOPT_HTTPPROXYTUNNEL) is used for ldap queries like
ldap://ldap.my.server.com/... You are unable to successfully execute the
query. In facts ldap_*_bind is executed directly against the ldap server
and proxy is totally ignored. This is true for both openLDAP and
Microsoft LDAP API.
Step to reproduce the error:
Just launch "curl --proxytunnel --proxy 192.168.1.1:8080
ldap://ldap.my.server.com/dc=... "
This fix adds an invocation to Curl_proxyCONNECT against the provided
proxy address and on successful "CONNECT" it tunnels ldap query to the
final ldap server through the HTTP proxy. As far as I know Microsoft
LDAP APIs don't permit tunnelling in any way so the patch provided is
for OpenLDAP only. The patch has been developed against OpenLDAP 2.4.23
and has been tested with Microsoft ISA Server 2006 and works properly
with basic, digest and NTLM authentication.
Rodric provide an awesome recipe that proved libcurl didn't timeout at
the requested time - it instead often timed out at [connect time] +
[timeout time] instead of the documented and intended [timeout time]
only. This bug was due to the code using the wrong base offset when
comparing against "now". I could also take the oppurtinity to simplify
the code by properly using of the generic help function for this:
Curl_timeleft.
Reported by: Rodric Glaser
Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
As this function uses return code 0 to mean that there is no timeout, it
needs to check that it doesn't return a time left value that is exactly
zero. It could lead to libcurl doing an extra 1000 ms select() call and
thus not timing out as accurately as it should.
I fell over this bug when working on the bug 3061535 but this fix does
not correct that problem alone, although this is a problem that needs to
be fixed.
Reported by: Rodric Glaser
Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
1. Remove the comment warning that it's "not been verified to work". It
works with no problems in my testing.
2. Remove 2 unnecessary includes.
3. Remove the myrealloc(). Initialize chunk.memory with malloc() instead
of NULL. The comments for these two parts contradicted each other.
4. Handle out of memory from realloc() instead of continuing.
5. Print a brief status message at the end.
The timeout is set for the connect phase already at the start of the
request so we should not add a new one, and we MUST not set expire to 0
as that will remove any other potentially existing timeouts.
When curl calls a function from that library then it needs to
explicitly link to the library instead of piggybacking on
libcurl's own dependency. Without this, GNU ld with the
--no-add-needed flag fails when linking (which Fedora now does
by default).
Reported by: Quanah Gibson-Mount
Bug: http://curl.haxx.se/mail/lib-2010-09/0085.html
The code reading chunked encoding attempts to rewind the code if it had
read more data than the chunky parser consumes. The rewinding can fail
and it will then cause an error. This change now makes the rewinding
only happen if pipelining is in use - as that's the only time it really
needs to be done.
Bug: http://curl.haxx.se/mail/lib-2010-08/0297.html
Reported by: Ron Parker
Curl_getconnectinfo() is changed to return a proper curl_socket_t for
the last socket so that it'll work more portably (and cause less
compiler warnings).
Add a timeout check for handles in the state machine so that they will
timeout in all states disregarding what actions that may or may not
happen.
Fixed a bug in socket_action introduced recently when looping over timed
out handles: it wouldn't assign the 'data' variable and thus it wouldn't
properly take care of handles.
In the update_timer function, the code now checks if the timeout has
been removed and then it tells the application. Previously it would
always let the remaining timeout(s) just linger to expire later on.
Each easy handle has a list of timeouts, so as soon as the main timeout
for a handle expires, we must make sure to get the next entry from the
list and re-add the handle to the splay tree.
This was attempted previously but was done poorly in my commit
232ad6549a.
When a new transfer is about to start we now set the proper timeouts to
expire for the multi interface if they are set for the handle. This is a
follow-up bugfix to make sure that easy handles timeout properly when
the times expire and the multi interface is used. This also improves
curl_multi_timeout().
Fixed some issues that caused xmllint failures, added features
and keywords, fixed some quotes and removed some <strip> sections
that unnecessarily limited test checking.
Introduced in the initial gopher commits, there was added logic to do
GOPHER test serving in the pingpong server but as it resembles HTTP much
more than FTP or SMTP, the gopher testing has been moved over to instead
use the sws (HTTP) server. This change simply removes unused code.
The fix for the busyloop really only is a temporary work-around. It
causes a BLOCKING behavior which is a NO-NO. This function should rather
be split up in a do and a doing piece where the pieces that aren't
possible to send now will be sent in the doing function repeatedly until
the entire request is sent.
HTTP allows that a server sends trailing headers after all the chunks
have been sent WITHOUT signalling their presence in the first response
headers. The "Trailer:" header is only a SHOULD there and as we need to
handle the situation even without that header I made libcurl ignore
Trailer: completely.
Test case 1116 was added to verify this and to make sure we handle more
than one trailer header properly.
Reported by: Patrick McManus
Bug: http://curl.haxx.se/bug/view.cgi?id=3052450
It was introduced in commit eeb2cb05 along with the -F type=
change. Also fixed a typo in the name of the magic filename=
parameter. Tweaked tests 39 and 173 to better test this path.
The numerical value passed to CURLOPT_RESUME_FROM for FTP uploads is
interpreted and used as position where to resume the _reading_ of the
local file and it will "blindly" append that data on the remote
file. This was certainly not clear in the docs previously.
Reported by: catalin
Bug: http://curl.haxx.se/bug/view.cgi?id=3048174
The -F option allows some custom parameters within the given string, and
those strings are separated with semicolons. You can for example specify
"name=daniel;type=text/plain" to set content-type for the
field. However, the use of semicolons like that made it not work fine if
you specified one within the content-type, like for:
"name=daniel;type=text/plain;charset=UTF-8"
... as the second one would be seen as a separator and "charset" is no
parameter curl knows anything about so it was just silently discarded.
The new logic now checks if the semicolon and following keyword looks
like a parameter it knows about and if it isn't it is assumed to be
meant to be used within the content-type string itself.
I modified test case 186 to verify that this works as intended.
Reported by: Larry Stone
Bug: http://curl.haxx.se/bug/view.cgi?id=3048988
The script works exactly same as the Perl one except for one thing:
when the text descriptions generated with openssl are included then
the md5 fingerprints are missing; seems openssl has either a bug or
a feature which prints the md5 fingerprint output to stdout instead
of writing them to specified file; this script could here do the same
as what the Perl scripr does (redirect stdout into file) but this
makes the script take up double the time because it needs to launch
cmd.exe 140 times (fo each openssl call). So I think for now we just
ommit the md5 fingerprints, and see if openssl will be fixed.
It seems that its time to look at some better ideas for the win32
non-configure builds; probably a prebuild target which copies
config-win32.h to curl_config.h and appends also then feature
defines like USE_ARES.
The 66 bytes checked are those 38 bytes with the chunked encoding
headers added: 8+8+10+35+5 = 66
The three-letter words become 8 bytes on the wire because they are sent
like: "3\r\none\r\n"
... and there's the trailing 5 bytes write after the four lines since
the final chunk is sent (which is "0\r\n\r\n").
I fell over this bug report that mentioned that libcurl could wrongly
send more than one complete messages at the end of a transfer. Reading
the code confirmed this, so I've added a new multi state to make it not
happen. The mentioned bug report was made by Brad Jorsch but is (oddly
enough) filed in Debian's bug tracker for the "wmweather+" tool.
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593390
In some situations, libtool will change directories and perform
a link step before executing the libtest test app. Since
LD_PRELOAD is in effect for this entire process, the path to the
binary must be absolute so it will be valid no matter in which
directory the app is running.
There's an error in http_negotiation.c where a mistake is using only
userpwd even for proxy requests. Ludek provided a patch, but I decided
to write the fix slightly different using his patch as inspiration.
Reported by: Ludek Finstrle
Bug: http://curl.haxx.se/bug/view.cgi?id=3046066
When detecting that the send or recv speed, the multi interface changes
state to TOOFAST and previously there was no timeout set that would
force a recheck but it would rely on the application to somehow call
libcurl anyway. This now sets a timeout for a suitable future time to
check again if the average transfer speed is then below the threshold
again.
Curl_expire() is now expanded to hold a list of timeouts for each easy
handle. Only the closest in time will be the one used as the primary
timeout for the handle and will be used for the splay tree (which sorts
and lists all handles within the multi handle).
When the main timeout has triggered/expired, the next timeout in time
that is kept in the list will be moved to the main timeout position and
used as the key to splay with. This way, all timeouts that are set with
Curl_expire() internally will end up as a proper timeout. Previously any
Curl_expire() that set a _later_ timeout than what was already set was
just silently ignored and thus missed.
Setting Curl_expire() with timeout 0 (zero) will cancel all previously
added timeouts.
Corrects known bug #62.
Instead of looping over all attached easy handles, this now keeps a list
of messages in the multi handle. It allows curl_multi_info_read() to
perform O(1) no matter how many easy handles that are handled. This is
of importance since this function may be polled very frequently by apps
using the multi interface.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
