the smell of release

from url.c: Curl_disconnect().

COPYING

@@ -1,6 +1,6 @@
 COPYRIGHT AND PERMISSION NOTICE
 
-Copyright (c) 1996 - 2004, Daniel Stenberg, <daniel@haxx.se>.
+Copyright (c) 1996 - 2005, Daniel Stenberg, <daniel@haxx.se>.
 
 All rights reserved.
 

Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -48,6 +48,15 @@ pdf:
 
 check: test
 
+if CROSSCOMPILING
+test-full: test
+test-torture: test
+
+test:
+	@echo "NOTICE: we can't run the tests when cross-compiling!"
+
+else
+
 test:
 	@(cd tests; $(MAKE) all quiet-test)
 
@@ -57,6 +66,8 @@ test-full:
 test-torture:
 	@(cd tests; $(MAKE) all torture-test)
 
+endif
+
 #
 # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
 # must contain the following line:

Makefile.dist

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -53,6 +53,18 @@ borland-clean:
 	cd ..\src
 	make -f Makefile.b32 clean
 
+watcom:
+	cd lib
+	wmake -f Makefile.Watcom
+	cd ..\src
+	wmake -f Makefile.Watcom
+
+watcom-clean:
+	cd lib
+	wmake -f Makefile.Watcom clean
+	cd ..\src
+	wmake -f Makefile.Watcom clean
+
 mingw32:
 	$(MAKE) -C lib -f Makefile.m32 ZLIB=1
 	$(MAKE) -C src -f Makefile.m32 ZLIB=1
@@ -65,6 +77,37 @@ mingw32-clean:
 	$(MAKE) -C lib -f Makefile.m32 clean
 	$(MAKE) -C src -f Makefile.m32 clean
 
+vc-clean:
+	cd lib
+	nmake -f Makefile.vc6 clean
+	cd ..\src
+	nmake -f Makefile.vc6 clean
+
+vc-all:
+	cd lib
+	nmake -f Makefile.vc6 cfg=release
+	nmake -f Makefile.vc6 cfg=release-ssl
+	nmake -f Makefile.vc6 cfg=release-zlib
+	nmake -f Makefile.vc6 cfg=release-ssl-zlib
+	nmake -f Makefile.vc6 cfg=release-ssl-dll
+	nmake -f Makefile.vc6 cfg=release-zlib-dll
+	nmake -f Makefile.vc6 cfg=release-ssl-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=release-dll
+	nmake -f Makefile.vc6 cfg=release-dll-ssl-dll
+	nmake -f Makefile.vc6 cfg=release-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=release-dll-ssl-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug
+	nmake -f Makefile.vc6 cfg=debug-ssl
+	nmake -f Makefile.vc6 cfg=debug-zlib
+	nmake -f Makefile.vc6 cfg=debug-ssl-zlib
+	nmake -f Makefile.vc6 cfg=debug-ssl-dll
+	nmake -f Makefile.vc6 cfg=debug-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug-ssl-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug-dll
+	nmake -f Makefile.vc6 cfg=debug-dll-ssl-dll
+	nmake -f Makefile.vc6 cfg=debug-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug-dll-ssl-dll-zlib-dll
+
 vc:
 	cd lib
 	nmake /f Makefile.vc6 cfg=release
@@ -93,13 +136,49 @@ vc-ssl-dll:
 	cd lib
 	nmake /f Makefile.vc6 cfg=release-ssl-dll
 	cd ..\src
-	nmake /f Makefile.vc6
+	nmake /f Makefile.vc6 cfg=release-ssl-dll
 
-vc-libcurl-ssl-dll:
+vc-dll-ssl-dll:
 	cd lib
-	nmake /f Makefile.vc6 cfg=release-libcurl-ssl-dll
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll
 	cd ..\src
-	nmake /f Makefile.vc6
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll
+
+vc-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-dll
+
+vc-dll-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-dll-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-dll-zlib-dll
+
+vc-dll-ssl-dll-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll-zlib-dll
+
+vc-ssl-dll-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-ssl-dll-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-ssl-dll-zlib-dll
+
+vc-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-zlib-dll
+
+vc-sspi:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release WINDOWS_SSPI=1
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release WINDOWS_SSPI=1
 
 djgpp:
 	$(MAKE) -C lib -f Makefile.dj

README

@@ -34,20 +34,27 @@ WEB SITE
 
         Sweden    -- http://curl.haxx.se/
         Australia -- http://curl.planetmirror.com/
+        Austria   -- http://curl.gds.tuwien.ac.at/
         Denmark   -- http://curl.cofman.dk/
         Estonia   -- http://curl.wildyou.net/
+        France    -- http://curl.mirror.internet.tp/
+        Germany   -- http://curl.kgt.org/
         Germany   -- http://curl.mirror.at.stealer.net/
         Germany   -- http://curl.netmirror.org/
         Russia    -- http://curl.tsuren.net/
+        Taiwan    -- http://curl.cs.pu.edu.tw/
         Thailand  -- http://curl.siamu.ac.th/
         US (CA)   -- http://curl.mirror.redwire.net/
-        US        -- http://curl.signal42.com/
+        US (CA)   -- http://curl.mirrormonster.com/
+        US (CA)   -- http://curl.signal42.com/
+        US (TX)   -- http://curl.109k.com/
 
 DOWNLOAD
 
   The official download mirror sites are:
 
         Australia -- http://curl.planetmirror.com/download.html
+        Austria   -- http://curl.gds.tuwien.ac.at/download.html
         Estonia   -- http://curl.wildyou.net/download.html
         Germany   -- ftp://ftp.fu-berlin.de/pub/unix/network/curl/
         Germany   -- http://curl.mirror.at.stealer.net/download.html
@@ -57,8 +64,12 @@ DOWNLOAD
         Russia    -- http://curl.tsuren.net/download.html
         Sweden    -- ftp://ftp.sunet.se/pub/www/utilities/curl/
         Sweden    -- http://cool.haxx.se/curl/
+        Taiwan    -- http://curl.cs.pu.edu.tw/download.html
         Thailand  -- http://curl.siamu.ac.th/download.html
         US (CA)   -- http://curl.mirror.redwire.net/download.html
+        US (CA)   -- http://curl.mirrormonster.com/download.html
+        US (CA)   -- http://curl.signal42.com/download.html
+        US (TX)   -- http://curl.109k.com/download.html
 
 CVS
 

RELEASE-NOTES

@@ -1,81 +1,57 @@
-Curl and libcurl 7.12.3
+Curl and libcurl 7.13.2
 
- Public curl release number:               84
- Releases counted from the very beginning: 111
- Available command line options:           100
- Available curl_easy_setopt() options:     123
+ Public curl release number:               87
+ Releases counted from the very beginning: 114
+ Available command line options:           106
+ Available curl_easy_setopt() options:     122
  Number of public functions in libcurl:    46
- Amount of public web site mirrors:        14
- Number of known libcurl bindings:         29
+ Amount of public web site mirrors:        20
+ Number of known libcurl bindings:         31
 
 This release includes the following changes:
 
- o PKCS12 certificate support added
- o added CURLINFO_SSL_ENGINES (and "--engine list")
- o new configure options: --disable-cookies, --disable-crypto-auth and
-   --disable-verbose
- o persistent ftp request improvements
- o CURLOPT_IOCTLFUNCTION and CURLOPT_IOCTLDATA added. If your app uses HTTP
-   Digest, NTLM or Negotiate authentication, you will most likely want to use
-   these
- o -w time_redirect and num_redirects
- o no longer uses libcurl.def for building on Windows, OS/2 and Netware
- o builds on Windows CE
- o request retrying, --retry and family added
- o FTP 3rd party transfers with source and dest on the same host now works
- o added CURLINFO_NUM_CONNECTS
+ o Added --form-string
+ o libcurl can be built with SSPI support. curl_version_info() then returns
+   a new feature bit: CURL_VERSION_SSPI. configure --enable-sspi added
+ o Added --proxy-anyauth
+ o Added runtests.1 and testcurl.1 man pages
 
 This release includes the following bugfixes:
 
- o curl -E on windows accepts "c:/path" with forward-slash
- o several improvements for large file support on windows
- o file handle leak in aborted multipart formpost file upload
- o -T upload multiple files with backslashes in file names
- o modified credentials between two requests on a persistent http connection
- o large file file:// resumes on Windows
- o URLs with username and IPv6 numerical addresses
- o configure works better with SSL libs in a "non-standard ld.so dir"
- o curl-config --vernum zero prefixed
- o bad memory access in the NTLM code
- o EPSV on multi-homed servers now works correctly
- o chunked-encoded transfers could get closed pre-maturely without error
- o proxy CONNECT now default timeouts after 3600 seconds
- o disabling EPSV or EPRT is ignored when connecting to an IPv6 FTP server
- o no extra progress meter newline output after each Location: followed
- o HTTP PUT/POST with Digest, NTLM or Negotiate no longer uses HEAD
- o works with or gracefully bails out when exceeding FD_SETSIZE file
-   descriptors
- o CURLINFO_REDIRECT_TIME works
- o building with gssapi libs and hdeaders in the default dirs
- o curl_getdate() parsing of dates later than year 2037 with 32 bit time_t
- o curl -v when stderr is closed wrote debug messages to the network socket
- o build failure with libidn 0.3.X or older
- o huge POSTs on VMS
- o configure no longer uses pkg-config on cross-compiles
- o potential gzip decompress memory leak
- o "-C - --fail" on a HTTP page already downloaded
- o formposting a zero byte file
- o use setlocale() for better IDN functionality by default
+ o the MSVC libcurl Makefile was fixed
+ o libcurl on Windows crash if resolver was active when easy handle was killed
+ o HTTP POST with auth and an initial 100 response before the 401/407
+ o configure's SSL-detection for msys/mingw
+ o better connection keep-alive when POSTing with HTTP Digest
+ o FTP-SSL
+ o reading FTP server response in multiple reads
+ o picking one out of multiple proxy auth methods
+ o inet_ntoa_r() when built with uClibc
+ o the so name issue for the LDAP library dynamic load
+ o crash when using SOCKS4 proxy
+ o a debug printf() was removed
+ o CURLOPT_FILETIME when downloading FTP corrupted data
+ o FTP upload resume now works even if no file is present on the site
+ o SSL seeding no longer attempts to read the whole random file
 
 Other curl-related news since the previous public release:
 
- o pycurl 7.12.2: http://pycurl.sf.net/
- o TclCurl 0.12.2: http://personal1.iddeo.es/andresgarci/tclcurl/english/
- o libcurl.NET 1.2: http://www.seasideresearch.com/downloads.html
- o RCurl 0.5.1: http://www.omegahat.org/RCurl/
- o libcurl.mono 1.0:
-   http://forge.novell.com/modules/xfmod/project/?libcurl-mono
- o new German curl mirror: http://curl.kgt.org/
+ o the cURL project is now over 7 years old
+ o daily curl binary builds for Windows fresh from CVS:
+   http://cool.haxx.se/curl-daily/
+ o curl-tracker is a new mailinglist for "tracker" activities:
+   http://cool.haxx.se/mailman/listinfo/curl-tracker
+ o libcurl binding for Common Lisp: http://common-lisp.net/project/cl-curl/
+ o pycurl 7.13.1 http://pycurl.sf.net
+ o http://curl.tolix.org is a new Californian mirror
+ o http://curl.seekmeup.com/ is a new mirror in US Texas
 
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Peter Wullinger, Guillaume Arluison, Alexander Krasnostavsky, Mohun Biswas,
- Tomas Pospisek, Gisle Vanem, Dan Fandrich, Paul Nolan, Andres Garcia, Tim
- Sneddon, Ian Gulliver, Jean-Philippe Barrette-LaPierre, Jeff Phillips,
- Wojciech Zwiefka, David Phillips, Reinout van Schouwen, Maurice Barnum,
- Richard Atterer, Rene Bernhardt, Matt Veenstra, Bryan Henderson, Ton Voon,
- Kai Sommerfeld, David Byron, Harshal Pradhan, Tom Lee, Dinar, Jean-Marc
- Ranger, Samuel Listopad
+ Dan Fandrich, Ignacio Vazquez-Abrams, Randy McMurchy, Dominick Meglio,
+ Jean-Marc Ranger, Tor Arntsen, Nodak Sodak, David Houlder, Gisle Vanem,
+ Christopher R. Palmer, Gwenole Beauchesne, Augustus Saunders, Jesper Jensen,
+ Tom Moers, Andres Garcia, Hardeep Singh, Marcelo Juchem
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,8 +1,35 @@
 Issues not sorted in any particular order.
 
-To get fixed in 7.12.3 (planned release: December 2004)
+To get fixed in 7.13.3 (planned release: June 2005)
 ======================
 
+58 - Fix KNOWN_BUGS #19: "FTP 3rd party transfers with the multi interface
+     doesn't work"
+
 47 - Peter Sylvester's patch for SRP on the TLS layer
      Awaits OpenSSL support for this, no need to support this in libcurl before
      there's an OpenSSL release that does it.
+
+To get fixed in 7.14.0
+======================
+
+55 - Add a function to the multi interface that gets file descriptors, as an
+     alternative to the curl_multi_fdset(). This is necessary to allow apps to
+     properly avoid the FD_SETSIZE problem.
+
+56 - Make curl_easy_perform() a wrapper-function that simply creates a multi
+     handle, adds the easy handle to it, runs curl_multi_perform() until the
+     transfer is done, then detach the easy handle, destroy the multi handle
+     and return the easy handle's return code. This will thus make everything
+     internally use and assume the multi interface. The select()-loop should
+     use the new function from (55).
+
+To get fixed in 7.15.0
+======================
+
+57 - Add an interface to libcurl for getting and setting cookies from an easy
+     handle. One idea: http://curl.haxx.se/mail/lib-2004-12/0195.html the
+     older idea: http://curl.haxx.se/dev/COOKIES. We need to settle on some
+     middle ground I guess.
+
+60 - 

acinclude.m4

@@ -87,9 +87,7 @@ AC_DEFINE(HAVE_IOCTLSOCKET_CASE, 1, [use Ioctlsocket() for non-blocking sockets]
 dnl Ioctlsocket didnt compile, do test 5!
   AC_TRY_COMPILE([
 /* headers for SO_NONBLOCK test (BeOS) */
-#include <sys/types.h>
-#include <unistd.h>
-#include <fcntl.h>
+#include <socket.h>
 ],[
 /* SO_NONBLOCK source code */
  long b = 1;
@@ -324,8 +322,24 @@ dnl program worked:
 [ ac_cv_working_ni_withscopeid="yes" ],
 dnl program failed:
 [ ac_cv_working_ni_withscopeid="no" ],
-dnl we cross-compile:
-[ ac_cv_working_ni_withscopeid="yes" ]
+dnl we cross-compile, check the headers using the preprocessor
+[
+
+ AC_EGREP_CPP(WORKS,
+[
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netdb.h>
+
+#ifdef NI_WITHSCOPEID
+WORKS
+#endif
+],
+  ac_cv_working_ni_withscopeid="yes",
+  ac_cv_working_ni_withscopeid="no" )
+
+ ]
 ) dnl end of AC_RUN_IFELSE
 
 ]) dnl end of AC_CACHE_CHECK
@@ -695,15 +709,15 @@ AC_DEFUN([CURL_CC_DEBUG_OPTS],
          dnl -Wcast-align is a bit too annoying on all gcc versions ;-)
 
          if test "$gccnum" -ge "207"; then
-           dnl gcc 2.7 or later (well, they don't work on 2.2.2)
-           WARN="$WARN -Wno-long-long -Wmissing-declarations -Wsign-compare"
+           dnl gcc 2.7 or later
+           WARN="$WARN -Wmissing-declarations"
          fi
 
          if test "$gccnum" -gt "295"; then
            dnl only if the compiler is newer than 2.95 since we got lots of
            dnl "`_POSIX_C_SOURCE' is not defined" in system headers with
            dnl gcc 2.95.4 on FreeBSD 4.9!
-           WARN="$WARN -Wundef"
+           WARN="$WARN -Wundef -Wno-long-long -Wsign-compare"
          fi
 
          if test "$gccnum" -ge "296"; then
@@ -768,3 +782,72 @@ AC_DEFUN([CURL_CC_DEBUG_OPTS],
 
 ]) dnl end of AC_DEFUN()
 
+
+dnl Determine the name of the library to pass to dlopen() based on the name
+dnl that would normally be given to AC_CHECK_LIB.  The preprocessor symbol
+dnl given is set to the quoted library file name. 
+dnl The standard dynamic library file name is first generated, based on the
+dnl current system type, then a search is performed for that file on the
+dnl standard dynamic library path.  If it is a symbolic link, the destination
+dnl of the link is used as the file name, after stripping off any minor
+dnl version numbers. If a library file can't be found, a guess is made.
+dnl This macro assumes AC_PROG_LIBTOOL has been called and requires perl
+dnl to be available in the PATH, or $PERL to be set to its location.
+dnl
+dnl CURL_DLLIB_NAME(VARIABLE, library_name)
+dnl e.g. CURL_DLLIB_NAME(LDAP_NAME, ldap) on a Linux system might result
+dnl in LDAP_NAME holding the string "libldap.so.2".
+
+AC_DEFUN([CURL_DLLIB_NAME],
+[
+AC_MSG_CHECKING([name of dynamic library $2])
+dnl The shared library extension variable name changes from version to
+dnl version of libtool.  Try a few names then just set one statically.
+test -z "$shared_ext" && shared_ext="$shrext_cmds"
+test -z "$shared_ext" && shared_ext="$shrext"
+test -z "$shared_ext" && shared_ext=".so"
+
+dnl Create the library link name of the correct form for this platform
+LIBNAME_LINK_SPEC=`echo "$library_names_spec" | $SED 's/^.* //'`
+DLGUESSLIB=`name=$2 eval echo "$libname_spec"`
+DLGUESSFILE=`libname="$DLGUESSLIB" release="" major="" versuffix="" eval echo "$LIBNAME_LINK_SPEC"`
+
+dnl Synthesize a likely dynamic library name in case we can't find an actual one
+SO_NAME_SPEC="$soname_spec"
+dnl soname_spec undefined when identical to the 1st entry in library_names_spec
+test -z "$SO_NAME_SPEC" && SO_NAME_SPEC=`echo "$library_names_spec" | $SED 's/ .*$//'`
+DLGUESSSOFILE=`libname="$DLGUESSLIB" release="" major="" versuffix="" eval echo "$SO_NAME_SPEC"`
+
+if test "$cross_compiling" = yes; then
+  dnl Can't look at filesystem when cross-compiling
+  AC_DEFINE_UNQUOTED($1, "$DLGUESSSOFILE", [$2 dynamic library file])
+  AC_MSG_RESULT([$DLGUESSSOFILE (guess while cross-compiling)])
+else
+
+  DLFOUNDFILE=""
+  if test "$sys_lib_dlsearch_path_spec" ; then
+    dnl Search for the link library name and see what it points to.
+    for direc in $sys_lib_dlsearch_path_spec ; do
+      DLTRYFILE="$direc/$DLGUESSFILE"
+      dnl Find where the symbolic link for this name points
+      changequote(<<, >>)dnl
+      <<
+      DLFOUNDFILE=`${PERL:-perl} -e 'use File::Basename; (basename(readlink($ARGV[0])) =~ /^(.*[^\d]\.\d+)[\d\.]*$/ && print ${1}) || exit 1;' "$DLTRYFILE" 2>&5`
+      >>
+      changequote([, ])dnl
+      if test "$?" -eq "0"; then
+        dnl Found the file link
+        break
+      fi
+    done
+  fi
+
+  if test -z "$DLFOUNDFILE" ; then
+    dnl Couldn't find a link library, so guess at a name.
+    DLFOUNDFILE="$DLGUESSSOFILE"
+  fi
+
+  AC_DEFINE_UNQUOTED($1, "$DLFOUNDFILE", [$2 dynamic library file])
+  AC_MSG_RESULT($DLFOUNDFILE)
+fi
+])

ares/CHANGES

@@ -1,5 +1,10 @@
   Changelog for the c-ares project
 
+* March 11, 2005
+
+- Dominick Meglio added ares_parse_aaaa_reply.c and did various
+  adjustments. The first little steps towards IPv6 support!
+
 * November 7
 
 - Fixed the VC project and makefile to use ares_cancel and ares_version

ares/Makefile.inc

@@ -3,7 +3,8 @@ ares__close_sockets.c ares_free_string.c ares_search.c ares__get_hostent.c \
 ares_gethostbyaddr.c ares_send.c ares__read_line.c ares_gethostbyname.c	   \
 ares_strerror.c ares_cancel.c ares_init.c ares_timeout.c ares_destroy.c	   \
 ares_mkquery.c ares_version.c ares_expand_name.c ares_parse_a_reply.c	   \
-windows_port.c ares_expand_string.c ares_parse_ptr_reply.c
+windows_port.c ares_expand_string.c ares_parse_ptr_reply.c                 \
+ares_parse_aaaa_reply.c
 
 HHEADERS = ares.h ares_private.h setup.h ares_dns.h ares_version.h nameser.h
 
@@ -12,4 +13,4 @@ MANPAGES= ares_destroy.3 ares_expand_name.3 ares_expand_string.3 ares_fds.3 \
  ares_gethostbyname.3 ares_init.3 ares_init_options.3 ares_mkquery.3	    \
  ares_parse_a_reply.3 ares_parse_ptr_reply.3 ares_process.3		    \
  ares_query.3 ares_search.3 ares_send.3 ares_strerror.3 ares_timeout.3	    \
- ares_version.3 ares_cancel.3
+ ares_version.3 ares_cancel.3 ares_parse_aaaa_reply.3

ares/Makefile.netware

@@ -20,7 +20,7 @@ endif
 TARGETS = adig.nlm ahost.nlm
 LTARGET = libcares.lib
 VERSION	= $(LIBCARES_VERSION)
-COPYR	= Copyright (c) 1996 - 2004, Daniel Stenberg, <daniel@haxx.se>
+COPYR	= Copyright (C) 1996 - 2005, Daniel Stenberg, <daniel@haxx.se>
 DESCR	= cURL $(subst .def,,$(notdir $@)) $(LIBCARES_VERSION_STR) - http://curl.haxx.se
 MTSAFE	= YES
 STACK	= 64000
@@ -297,6 +297,8 @@ config.h: Makefile.netware
 	@echo $(DL)#define SIZEOF_CURL_OFF_T 4$(DL) >> $@
 	@echo $(DL)#define STDC_HEADERS 1$(DL) >> $@
 	@echo $(DL)#define TIME_WITH_SYS_TIME 1$(DL) >> $@
+	@echo $(DL)#define HAVE_STRUCT_IN6_ADDR 1$(DL) >> $@
+	@echo $(DL)#define HAVE_AF_INET6 1$(DL) >> $@
 ifdef NW_WINSOCK
 	@echo $(DL)#define HAVE_CLOSESOCKET 1$(DL) >> $@
 else

ares/acinclude.m4

@@ -99,3 +99,50 @@ AC_DEFUN([CURL_CC_DEBUG_OPTS],
 
 ]) dnl end of AC_DEFUN()
 
+
+dnl This macro determines if the specified struct exists in the specified file
+dnl Syntax:
+dnl CARES_CHECK_STRUCT(headers, struct name, if found, [if not found])
+
+AC_DEFUN([CARES_CHECK_STRUCT], [
+  AC_MSG_CHECKING([for struct $2])
+  AC_TRY_COMPILE([$1], 
+    [
+      struct $2 struct_instance;
+    ], ac_struct="yes", ac_found="no")
+  if test "$ac_struct" = "yes" ; then
+    AC_MSG_RESULT(yes)
+    $3
+  else
+    AC_MSG_RESULT(no)
+    $4
+  fi
+])
+
+dnl This macro determines if the specified constant exists in the specified file
+dnl Syntax:
+dnl CARES_CHECK_CONSTANT(headers, constant name, if found, [if not found])
+
+AC_DEFUN([CARES_CHECK_CONSTANT], [
+  AC_MSG_CHECKING([for $2])
+  AC_EGREP_CPP(VARIABLEWASDEFINED,
+   [
+      $1
+
+      #ifdef $2
+        VARIABLEWASDEFINED
+      #else
+        NJET
+      #endif
+    ], ac_constant="yes", ac_constant="no"
+  )
+  if test "$ac_constant" = "yes" ; then
+    AC_MSG_RESULT(yes)
+    $3
+  else
+    AC_MSG_RESULT(no)
+    $4
+  fi
+])
+
+

ares/ares.h

@@ -137,12 +137,13 @@ int ares_expand_string(const unsigned char *encoded, const unsigned char *abuf,
                      int alen, unsigned char **s, long *enclen);
 int ares_parse_a_reply(const unsigned char *abuf, int alen,
                        struct hostent **host);
+int ares_parse_aaaa_reply(const unsigned char *abuf, int alen,
+                       struct hostent **host);
 int ares_parse_ptr_reply(const unsigned char *abuf, int alen, const void *addr,
                          int addrlen, int family, struct hostent **host);
 void ares_free_string(void *str);
 void ares_free_hostent(struct hostent *host);
 const char *ares_strerror(int code);
-void ares_free_errmem(char *mem);
 
 #ifdef  __cplusplus
 }

ares/ares_gethostbyaddr.c

@@ -147,21 +147,20 @@ static int file_lookup(struct in_addr *addr, struct hostent **host)
   int status;
 
 #ifdef WIN32
-
   char PATH_HOSTS[MAX_PATH];
   if (IS_NT()) {
-        char tmp[MAX_PATH];
-        HKEY hkeyHosts;
+    char tmp[MAX_PATH];
+    HKEY hkeyHosts;
 
-        if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, WIN_NS_NT_KEY, 0, KEY_READ, &hkeyHosts)
-                == ERROR_SUCCESS)
-        {
-                DWORD dwLength = MAX_PATH;
-                RegQueryValueEx(hkeyHosts, DATABASEPATH, NULL, NULL, tmp,
-                        &dwLength);
-                ExpandEnvironmentStrings(tmp, PATH_HOSTS, MAX_PATH);
-                RegCloseKey(hkeyHosts);
-        }
+    if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, WIN_NS_NT_KEY, 0, KEY_READ, &hkeyHosts)
+        == ERROR_SUCCESS)
+    {
+      DWORD dwLength = MAX_PATH;
+      RegQueryValueEx(hkeyHosts, DATABASEPATH, NULL, NULL, (LPBYTE)tmp,
+                      &dwLength);
+      ExpandEnvironmentStrings(tmp, PATH_HOSTS, MAX_PATH);
+      RegCloseKey(hkeyHosts);
+    }
   }
   else
     GetWindowsDirectory(PATH_HOSTS, MAX_PATH);

ares/ares_gethostbyname.c

@@ -222,18 +222,18 @@ static int file_lookup(const char *name, struct hostent **host)
 #ifdef WIN32
   char PATH_HOSTS[MAX_PATH];
   if (IS_NT()) {
-        char tmp[MAX_PATH];
-        HKEY hkeyHosts;
+    char tmp[MAX_PATH];
+    HKEY hkeyHosts;
 
-        if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, WIN_NS_NT_KEY, 0, KEY_READ, &hkeyHosts)
-                == ERROR_SUCCESS)
-        {
-                DWORD dwLength = MAX_PATH;
-                RegQueryValueEx(hkeyHosts, DATABASEPATH, NULL, NULL, tmp,
-                        &dwLength);
-                ExpandEnvironmentStrings(tmp, PATH_HOSTS, MAX_PATH);
-                RegCloseKey(hkeyHosts);
-        }
+    if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, WIN_NS_NT_KEY, 0, KEY_READ, &hkeyHosts)
+        == ERROR_SUCCESS)
+    {
+      DWORD dwLength = MAX_PATH;
+      RegQueryValueEx(hkeyHosts, DATABASEPATH, NULL, NULL, (LPBYTE)tmp,
+                      &dwLength);
+      ExpandEnvironmentStrings(tmp, PATH_HOSTS, MAX_PATH);
+      RegCloseKey(hkeyHosts);
+    }
   }
   else
     GetWindowsDirectory(PATH_HOSTS, MAX_PATH);

ares/ares_init.c

@@ -54,19 +54,22 @@ static int init_by_options(ares_channel channel, struct ares_options *options,
 static int init_by_environment(ares_channel channel);
 static int init_by_resolv_conf(ares_channel channel);
 static int init_by_defaults(ares_channel channel);
+
+static int config_nameserver(struct server_state **servers, int *nservers,
+                             char *str);
+static int set_search(ares_channel channel, const char *str);
+static int set_options(ares_channel channel, const char *str);
+static const char *try_option(const char *p, const char *q, const char *opt);
+#ifndef WIN32
+static int ip_addr(const char *s, int len, struct in_addr *addr);
+static void natural_mask(struct apattern *pat);
 static int config_domain(ares_channel channel, char *str);
 static int config_lookup(ares_channel channel, const char *str,
                          const char *bindch, const char *filech);
-static int config_nameserver(struct server_state **servers, int *nservers,
-                             char *str);
 static int config_sortlist(struct apattern **sortlist, int *nsort,
                            const char *str);
-static int set_search(ares_channel channel, const char *str);
-static int set_options(ares_channel channel, const char *str);
 static char *try_config(char *s, const char *opt);
-static const char *try_option(const char *p, const char *q, const char *opt);
-static int ip_addr(const char *s, int len, struct in_addr *addr);
-static void natural_mask(struct apattern *pat);
+#endif
 
 int ares_init(ares_channel *channelptr)
 {
@@ -264,7 +267,8 @@ static int get_res_nt(HKEY hKey, const char *subkey, char **obuf)
   if (!*obuf)
     return 0;
 
-  if (RegQueryValueEx(hKey, subkey, 0, NULL, *obuf, &size) != ERROR_SUCCESS)
+  if (RegQueryValueEx(hKey, subkey, 0, NULL,
+                      (LPBYTE)*obuf, &size) != ERROR_SUCCESS)
   {
     free(*obuf);
     return 0;
@@ -709,6 +713,7 @@ static int init_by_defaults(ares_channel channel)
   return ARES_SUCCESS;
 }
 
+#ifndef WIN32
 static int config_domain(ares_channel channel, char *str)
 {
   char *q;
@@ -749,6 +754,8 @@ static int config_lookup(ares_channel channel, const char *str,
   return (channel->lookups) ? ARES_SUCCESS : ARES_ENOMEM;
 }
 
+#endif
+
 static int config_nameserver(struct server_state **servers, int *nservers,
                              char *str)
 {
@@ -810,6 +817,7 @@ static int config_nameserver(struct server_state **servers, int *nservers,
   return ARES_SUCCESS;
 }
 
+#ifndef WIN32
 static int config_sortlist(struct apattern **sortlist, int *nsort,
                            const char *str)
 {
@@ -856,6 +864,7 @@ static int config_sortlist(struct apattern **sortlist, int *nsort,
 
   return ARES_SUCCESS;
 }
+#endif
 
 static int set_search(ares_channel channel, const char *str)
 {
@@ -937,6 +946,7 @@ static int set_options(ares_channel channel, const char *str)
   return ARES_SUCCESS;
 }
 
+#ifndef WIN32
 static char *try_config(char *s, const char *opt)
 {
   size_t len;
@@ -950,12 +960,15 @@ static char *try_config(char *s, const char *opt)
   return s;
 }
 
+#endif
+
 static const char *try_option(const char *p, const char *q, const char *opt)
 {
   size_t len = strlen(opt);
   return ((size_t)(q - p) > len && !strncmp(p, opt, len)) ? &p[len] : NULL;
 }
 
+#ifndef WIN32
 static int ip_addr(const char *s, int len, struct in_addr *addr)
 {
   char ipbuf[16];
@@ -991,3 +1004,4 @@ static void natural_mask(struct apattern *pat)
   else
     pat->mask.s_addr = htonl(IN_CLASSC_NET);
 }
+#endif

ares/ares_parse_aaaa_reply.3

@@ -0,0 +1,64 @@
+.\" $Id$
+.\"
+.\" Copyright 2005 by Dominick Meglio.
+.\"
+.\" Permission to use, copy, modify, and distribute this
+.\" software and its documentation for any purpose and without
+.\" fee is hereby granted, provided that the above copyright
+.\" notice appear in all copies and that both that copyright
+.\" notice and this permission notice appear in supporting
+.\" documentation, and that the name of M.I.T. not be used in
+.\" advertising or publicity pertaining to distribution of the
+.\" software without specific, written prior permission.
+.\" M.I.T. makes no representations about the suitability of
+.\" this software for any purpose.  It is provided "as is"
+.\" without express or implied warranty.
+.\"
+.TH ARES_PARSE_AAAA_REPLY 3 "10 March 2005"
+.SH NAME
+ares_parse_aaaa_reply \- Parse a reply to a DNS query of type AAAA into a hostent
+.SH SYNOPSIS
+.nf
+.B #include <ares.h>
+.PP
+.B int ares_parse_aaaa_reply(const unsigned char *\fIabuf\fP, int \fIalen\fP,
+.B 	struct hostent **\fIhost\fP);
+.fi
+.SH DESCRIPTION
+The
+.B ares_parse_aaaa_reply
+function parses the response to a query of type AAAA into a
+.BR "struct hostent" .
+The parameters
+.I abuf
+and
+.I alen
+give the contents of the response.  The result is stored in allocated
+memory and a pointer to it stored into the variable pointed to by
+.IR host .
+It is the caller's responsibility to free the resulting host structure
+using
+.BR ares_free_hostent (3)
+when it is no longer needed.
+.SH RETURN VALUES
+.B ares_parse_aaaa_reply
+can return any of the following values:
+.TP 15
+.B ARES_SUCCESS
+The response was successfully parsed.
+.TP 15
+.B ARES_EBADRESP
+The response was malformatted.
+.TP 15
+.B ARES_ENODATA
+The response did not contain an answer to the query.
+.TP 15
+.B ARES_ENOMEM
+Memory was exhausted.
+.SH SEE ALSO
+.BR ares_gethostbyname (3),
+.BR ares_free_hostent (3)
+.SH AUTHOR
+Dominick Meglio
+.br
+Copyright 2005 by Dominick Meglio.

ares/ares_parse_aaaa_reply.c

@@ -0,0 +1,173 @@
+/* Copyright 2005 Dominick Meglio
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting
+ * documentation, and that the name of M.I.T. not be used in
+ * advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is"
+ * without express or implied warranty.
+ */
+
+#include "setup.h"
+#include <sys/types.h>
+
+#if defined(WIN32) && !defined(WATT32)
+#include "nameser.h"
+#else
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <arpa/nameser.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include "ares.h"
+#include "ares_dns.h"
+#include "ares_private.h"
+
+int ares_parse_aaaa_reply(const unsigned char *abuf, int alen,
+                       struct hostent **host)
+{
+  unsigned int qdcount, ancount;
+  int status, i, rr_type, rr_class, rr_len, naddrs;
+  int naliases;
+  long len;
+  const unsigned char *aptr;
+  char *hostname, *rr_name, *rr_data, **aliases;
+  struct in6_addr *addrs;
+  struct hostent *hostent;
+
+  /* Set *host to NULL for all failure cases. */
+  *host = NULL;
+
+  /* Give up if abuf doesn't have room for a header. */
+  if (alen < HFIXEDSZ)
+    return ARES_EBADRESP;
+
+  /* Fetch the question and answer count from the header. */
+  qdcount = DNS_HEADER_QDCOUNT(abuf);
+  ancount = DNS_HEADER_ANCOUNT(abuf);
+  if (qdcount != 1)
+    return ARES_EBADRESP;
+
+  /* Expand the name from the question, and skip past the question. */
+  aptr = abuf + HFIXEDSZ;
+  status = ares_expand_name(aptr, abuf, alen, &hostname, &len);
+  if (status != ARES_SUCCESS)
+    return status;
+  if (aptr + len + QFIXEDSZ > abuf + alen)
+    {
+      free(hostname);
+      return ARES_EBADRESP;
+    }
+  aptr += len + QFIXEDSZ;
+
+  /* Allocate addresses and aliases; ancount gives an upper bound for both. */
+  addrs = malloc(ancount * sizeof(struct in6_addr));
+  if (!addrs)
+    {
+      free(hostname);
+      return ARES_ENOMEM;
+    }
+  aliases = malloc((ancount + 1) * sizeof(char *));
+  if (!aliases)
+    {
+      free(hostname);
+      free(addrs);
+      return ARES_ENOMEM;
+    }
+  naddrs = 0;
+  naliases = 0;
+
+  /* Examine each answer resource record (RR) in turn. */
+  for (i = 0; i < (int)ancount; i++)
+    {
+      /* Decode the RR up to the data field. */
+      status = ares_expand_name(aptr, abuf, alen, &rr_name, &len);
+      if (status != ARES_SUCCESS)
+        break;
+      aptr += len;
+      if (aptr + RRFIXEDSZ > abuf + alen)
+        {
+          status = ARES_EBADRESP;
+          break;
+        }
+      rr_type = DNS_RR_TYPE(aptr);
+      rr_class = DNS_RR_CLASS(aptr);
+      rr_len = DNS_RR_LEN(aptr);
+      aptr += RRFIXEDSZ;
+
+      if (rr_class == C_IN && rr_type == T_AAAA
+          && rr_len == sizeof(struct in6_addr)
+          && strcasecmp(rr_name, hostname) == 0)
+        {
+          memcpy(&addrs[naddrs], aptr, sizeof(struct in6_addr));
+          naddrs++;
+          status = ARES_SUCCESS;
+        }
+
+      if (rr_class == C_IN && rr_type == T_CNAME)
+        {
+          /* Record the RR name as an alias. */
+          aliases[naliases] = rr_name;
+          naliases++;
+
+          /* Decode the RR data and replace the hostname with it. */
+          status = ares_expand_name(aptr, abuf, alen, &rr_data, &len);
+          if (status != ARES_SUCCESS)
+            break;
+          free(hostname);
+          hostname = rr_data;
+        }
+      else
+        free(rr_name);
+
+      aptr += rr_len;
+      if (aptr > abuf + alen)
+        {
+          status = ARES_EBADRESP;
+          break;
+        }
+    }
+
+  if (status == ARES_SUCCESS && naddrs == 0)
+    status = ARES_ENODATA;
+  if (status == ARES_SUCCESS)
+    {
+      /* We got our answer.  Allocate memory to build the host entry. */
+      aliases[naliases] = NULL;
+      hostent = malloc(sizeof(struct hostent));
+      if (hostent)
+        {
+          hostent->h_addr_list = malloc((naddrs + 1) * sizeof(char *));
+          if (hostent->h_addr_list)
+            {
+              /* Fill in the hostent and return successfully. */
+              hostent->h_name = hostname;
+              hostent->h_aliases = aliases;
+              hostent->h_addrtype = AF_INET6;
+              hostent->h_length = sizeof(struct in6_addr);
+              for (i = 0; i < naddrs; i++)
+                hostent->h_addr_list[i] = (char *) &addrs[i];
+              hostent->h_addr_list[naddrs] = NULL;
+              *host = hostent;
+              return ARES_SUCCESS;
+            }
+          free(hostent);
+        }
+      status = ARES_ENOMEM;
+    }
+  for (i = 0; i < naliases; i++)
+    free(aliases[i]);
+  free(aliases);
+  free(addrs);
+  free(hostname);
+  return status;
+}

ares/ares_private.h

@@ -164,9 +164,5 @@ int ares__read_line(FILE *fp, char **buf, int *bufsize);
    libcurl lowlevel code from within library is ugly and only works when
    c-ares is built and linked with a similarly debug-build libcurl, but we do
    this anyway for convenience. */
-#ifndef CURL_EXTERN
-/* ugly hack to make this compile */
-#define CURL_EXTERN
-#endif
 #include "../lib/memdebug.h"
 #endif

ares/ares_process.c

@@ -465,8 +465,12 @@ void ares__send_query(ares_channel channel, struct query *query, time_t now)
 
 static int open_tcp_socket(ares_channel channel, struct server_state *server)
 {
-  ares_socket_t s;
+#if defined(WIN32)
+  u_long flags;
+#else
   int flags;
+#endif
+  ares_socket_t s;
   struct sockaddr_in sockin;
 
   /* Acquire a socket. */

ares/configure.ac

@@ -41,6 +41,10 @@ AC_HELP_STRING([--disable-debug],[Disable debug options]),
     dnl Checks for standard header files, to make memdebug.h inclusions bettter
     AC_HEADER_STDC
 
+    dnl the entire --enable-debug is a hack that lives and runs on top of
+    dnl libcurl stuff so this BUILDING_LIBCURL is not THAT much uglier
+    AC_DEFINE(BUILDING_LIBCURL, 1, [when building as static part of libcurl])
+
     CPPFLAGS="$CPPFLAGS -DCURLDEBUG -I$srcdir/../include"
     CFLAGS="$CFLAGS -g" 
 
@@ -61,6 +65,59 @@ AC_CHECK_HEADERS(
        sys/time.h \
        sys/select.h \
        sys/socket.h \
-       )
+       winsock.h \
+       netinet/in.h \
+  )
+
+dnl check for AF_INET6
+CARES_CHECK_CONSTANT(
+  [
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#ifdef HAVE_WINSOCK_H
+#include <winsock.h>
+#endif
+
+  ], [PF_INET6], 
+     AC_DEFINE_UNQUOTED(HAVE_PF_INET6,1,[Define to 1 if you have PF_INET6.])
+)
+
+dnl check for PF_INET6
+CARES_CHECK_CONSTANT(
+  [
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+#ifdef HAVE_WINSOCK_H
+#include <winsock.h>
+#endif
+
+  ], [AF_INET6], 
+     AC_DEFINE_UNQUOTED(HAVE_AF_INET6,1,[Define to 1 if you have AF_INET6.])
+)
+
+
+dnl check for the in6_addr structure
+CARES_CHECK_STRUCT(
+  [
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_WINSOCK_H
+#include <winsock.h>
+#endif
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
+  ], [in6_addr], 
+     AC_DEFINE_UNQUOTED(HAVE_STRUCT_IN6_ADDR,1,[Define to 1 if you have struct in6_addr.])
+)
 
 AC_OUTPUT(Makefile)

ares/setup.h

@@ -1,7 +1,7 @@
 #ifndef ARES_SETUP_H
 #define ARES_SETUP_H
 
-/* Copyright (C) 2004 by Daniel Stenberg et al
+/* Copyright (C) 2004 - 2005 by Daniel Stenberg et al
  *
  * Permission to use, copy, modify, and distribute this software and its
  * documentation for any purpose and without fee is hereby granted, provided
@@ -45,11 +45,11 @@ typedef int ares_socket_t;
 /* Assume a few thing unless they're set by configure
  */
 #if !defined(HAVE_SYS_TIME_H) && !defined(_MSC_VER)
-#define HAVE_SYS_TIME_H  
+#define HAVE_SYS_TIME_H
 #endif
 
 #if !defined(HAVE_UNISTD_H) && !defined(_MSC_VER)
-#define HAVE_UNISTD_H 
+#define HAVE_UNISTD_H 1
 #endif
 
 #if !defined(HAVE_SYS_UIO_H) && !defined(WIN32) && !defined(MSDOS)
@@ -69,4 +69,24 @@ int ares_strcasecmp(const char *s1, const char *s2);
 #define strcasecmp(a,b) ares_strcasecmp(a,b)
 #endif
 
+/* IPv6 compatibility */
+#if !defined(HAVE_AF_INET6)
+#if defined(HAVE_PF_INET6)
+#define AF_INET6 PF_INET6
+#else
+#define AF_INET6 AF_MAX+1
+#endif
+#endif
+
+#ifndef HAVE_PF_INET6
+#define PF_INET6 AF_INET6
+#endif
+
+#ifndef HAVE_STRUCT_IN6_ADDR
+struct in6_addr
+{
+  unsigned char s6_addr[16];
+};
+#endif
+
 #endif /* ARES_SETUP_H */

ares/vc/adig/adig.mak

@@ -185,24 +185,24 @@ SOURCE=..\..\getopt.c
 !IF  "$(CFG)" == "adig - Win32 Release"
 
 "areslib - Win32 Release" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" 
    cd "..\adig"
 
 "areslib - Win32 ReleaseCLEAN" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" RECURSE=1 CLEAN 
    cd "..\adig"
 
 !ELSEIF  "$(CFG)" == "adig - Win32 Debug"
 
 "areslib - Win32 Debug" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" 
    cd "..\adig"
 
 "areslib - Win32 DebugCLEAN" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" RECURSE=1 CLEAN 
    cd "..\adig"
 

ares/vc/ahost/ahost.mak

@@ -195,24 +195,24 @@ SOURCE=..\..\ahost.c
 !IF  "$(CFG)" == "ahost - Win32 Release"
 
 "areslib - Win32 Release" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" 
    cd "..\ahost"
 
 "areslib - Win32 ReleaseCLEAN" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Release" RECURSE=1 CLEAN 
    cd "..\ahost"
 
 !ELSEIF  "$(CFG)" == "ahost - Win32 Debug"
 
 "areslib - Win32 Debug" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" 
    cd "..\ahost"
 
 "areslib - Win32 DebugCLEAN" : 
-   cd "\ARES-1.1.1\vc\areslib"
+   cd "..\areslib"
    $(MAKE) /$(MAKEFLAGS) /F ".\areslib.mak" CFG="areslib - Win32 Debug" RECURSE=1 CLEAN 
    cd "..\ahost"
 

buildconf

@@ -168,6 +168,8 @@ echo "buildconf: running aclocal hack to convert all mv to mv -f"
 perl -i.bak -pe 's/\bmv +([^-\s])/mv -f $1/g' aclocal.m4
 echo "buildconf: running autoheader"
 ${AUTOHEADER:-autoheader} || die "The autoheader command failed"
+echo "buildconf: cp lib/config.h.in src/config.h.in"
+cp lib/config.h.in src/config.h.in
 echo "buildconf: running autoconf"
 ${AUTOCONF:-autoconf}     || die "The autoconf command failed"
 

configure.ac

@@ -66,6 +66,7 @@ dnl initialize all the info variables
     curl_idn_msg="no      (--with-libidn)"
  curl_manual_msg="no      (--enable-manual)"
 curl_verbose_msg="enabled (--disable-verbose)"
+   curl_sspi_msg="no      (--enable-sspi)"
 
 dnl
 dnl Detect the canonical host and target build environment
@@ -116,6 +117,17 @@ esac
 AC_MSG_RESULT($mimpure)
 AM_CONDITIONAL(MIMPURE, test x$mimpure = xyes)
 
+AC_MSG_CHECKING([if we need BUILDING_LIBCURL])
+case $host in
+  *-*-mingw*)
+    AC_DEFINE(BUILDING_LIBCURL, 1, [when building libcurl itself])
+    AC_MSG_RESULT(yes)
+    ;;
+  *)
+    AC_MSG_RESULT(no)
+    ;;
+esac
+
 dnl The install stuff has already been taken care of by the automake stuff
 dnl AC_PROG_INSTALL
 AC_PROG_MAKE_SET
@@ -133,8 +145,8 @@ AC_HELP_STRING([--disable-http],[Disable HTTP support]),
        AC_DEFINE(CURL_DISABLE_HTTP, 1, [to disable HTTP])
        AC_MSG_WARN([disable HTTP disables FTP over proxy and GOPHER too])
        AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable GOPHER])
-       AC_SUBST(CURL_DISABLE_HTTP)
-       AC_SUBST(CURL_DISABLE_GOPHER)
+       AC_SUBST(CURL_DISABLE_HTTP, [1])
+       AC_SUBST(CURL_DISABLE_GOPHER, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -149,7 +161,7 @@ AC_HELP_STRING([--disable-ftp],[Disable FTP support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_FTP, 1, [to disable FTP])
-       AC_SUBST(CURL_DISABLE_FTP)
+       AC_SUBST(CURL_DISABLE_FTP, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -164,7 +176,7 @@ AC_HELP_STRING([--disable-gopher],[Disable GOPHER support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable GOPHER])
-       AC_SUBST(CURL_DISABLE_GOPHER)
+       AC_SUBST(CURL_DISABLE_GOPHER, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -179,7 +191,7 @@ AC_HELP_STRING([--disable-file],[Disable FILE support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_FILE, 1, [to disable FILE])
-       AC_SUBST(CURL_DISABLE_FILE)
+       AC_SUBST(CURL_DISABLE_FILE, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -194,7 +206,7 @@ AC_HELP_STRING([--disable-ldap],[Disable LDAP support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
-       AC_SUBST(CURL_DISABLE_LDAP)
+       AC_SUBST(CURL_DISABLE_LDAP, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -209,7 +221,7 @@ AC_HELP_STRING([--disable-dict],[Disable DICT support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_DICT, 1, [to disable DICT])
-       AC_SUBST(CURL_DISABLE_DICT)
+       AC_SUBST(CURL_DISABLE_DICT, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -224,7 +236,7 @@ AC_HELP_STRING([--disable-telnet],[Disable TELNET support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_TELNET, 1, [to disable TELNET])
-       AC_SUBST(CURL_DISABLE_TELNET)
+       AC_SUBST(CURL_DISABLE_TELNET, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -306,6 +318,7 @@ then
   AC_TRY_LINK([#include <winsock2.h>],
                [gethostbyname("www.dummysite.com");],
                [ dnl worked!
+               ws2="yes"
                AC_MSG_RESULT([yes])
                HAVE_GETHOSTBYNAME="1"],
                [ dnl failed, restore LIBS
@@ -314,6 +327,16 @@ then
              )
 fi
 
+if test "$HAVE_GETHOSTBYNAME" != "1"
+then
+  dnl gethostbyname in the net lib - for BeOS
+  AC_CHECK_LIB(net, gethostbyname,
+               [HAVE_GETHOSTBYNAME="1"
+               LIBS="$LIBS -lnet"
+               ])
+fi
+
+
 if test "$HAVE_GETHOSTBYNAME" = "1"; then
   AC_DEFINE(HAVE_GETHOSTBYNAME, 1, [If you have gethostbyname])
 else
@@ -350,6 +373,55 @@ AC_HELP_STRING([--enable-libgcc],[use libgcc when linking]),
        AC_MSG_RESULT(no)
 )
 
+dnl **********************************************************************
+dnl Check for the name of dynamic OpenLDAP libraries
+dnl **********************************************************************
+
+LDAPLIBNAME=""
+AC_ARG_WITH(ldap-lib,
+AC_HELP_STRING([--with-ldap-lib=libname],[Specify name of dynamic ldap lib file]),
+ [LDAPLIBNAME="$withval"])
+
+LBERLIBNAME=""
+AC_ARG_WITH(lber-lib,
+AC_HELP_STRING([--with-lber-lib=libname],[Specify name of dynamic lber lib file]),
+ [LBERLIBNAME="$withval"])
+
+if test x$CURL_DISABLE_LDAP != x1 ; then
+
+  if test -z "$LDAPLIBNAME" ; then
+    case $host in
+      *-*-cygwin | *-*-mingw* | *-*-pw32*)
+        dnl Windows uses a single and unique OpenLDAP DLL name
+        LDAPLIBNAME="wldap32.dll"
+        LBERLIBNAME="no"
+        ;;
+    esac
+  fi
+
+  if test "$LDAPLIBNAME" ; then
+    AC_DEFINE_UNQUOTED(DL_LDAP_FILE, "$LDAPLIBNAME")
+    AC_MSG_CHECKING([name of dynamic library ldap])
+    AC_MSG_RESULT($LDAPLIBNAME)
+  else
+    dnl Try to find the right ldap library name for this system
+    CURL_DLLIB_NAME(DL_LDAP_FILE, ldap)
+  fi
+
+  if test "$LBERLIBNAME" ; then
+    dnl If name is "no" then don't define this variable at all
+    dnl (it's only needed if libldap.so's dependencies are broken).
+    if test "$LBERLIBNAME" != "no" ; then 
+      AC_DEFINE_UNQUOTED(DL_LBER_FILE, "$LBERLIBNAME")
+    fi
+    AC_MSG_CHECKING([name of dynamic library lber])
+    AC_MSG_RESULT($LBERLIBNAME)
+  else
+    dnl Try to find the right lber library name for this system
+    CURL_DLLIB_NAME(DL_LBER_FILE, lber)
+  fi
+fi
+
 dnl **********************************************************************
 dnl Check for the presence of the winmm library.
 dnl **********************************************************************
@@ -738,13 +810,29 @@ else
     fi
   fi
 
+  dnl This is for Msys/Mingw
+  AC_MSG_CHECKING([for gdi32])
+  my_ac_save_LIBS=$LIBS
+  LIBS="-lgdi32 $LIBS"
+  AC_TRY_LINK([#include <windef.h>
+               #include <wingdi.h>],
+               [GdiFlush();],
+               [ dnl worked!
+               AC_MSG_RESULT([yes])],
+               [ dnl failed, restore LIBS
+               LIBS=$my_ac_save_LIBS
+               AC_MSG_RESULT(no)]
+              )
+
   AC_CHECK_LIB(crypto, CRYPTO_lock,[
      HAVECRYPTO="yes"
+     LIBS="-lcrypto $LIBS"
      ],[
      LDFLAGS="$CLEANLDFLAGS -L$EXTRA_SSL/lib$libsuff"
      CPPFLAGS="$CLEANCPPFLAGS -I$EXTRA_SSL/include/openssl -I$EXTRA_SSL/include"
      AC_CHECK_LIB(crypto, CRYPTO_add_lock,[
-       HAVECRYPTO="yes" ], [
+       HAVECRYPTO="yes"
+       LIBS="-lcrypto $LIBS"], [
        LDFLAGS="$CLEANLDFLAGS"
        CPPFLAGS="$CLEANCPPFLAGS"
        LIBS="$CLEANLIBS"
@@ -759,21 +847,6 @@ else
     dnl This is only reasonable to do if crypto actually is there: check for
     dnl SSL libs NOTE: it is important to do this AFTER the crypto lib
 
-    dnl This is for Msys/Mingw
-    AC_MSG_CHECKING([for gdi32])
-    my_ac_save_LIBS=$LIBS
-    LIBS="-lgdi32 $LIBS"
-    AC_TRY_LINK([#include <windef.h>
-                 #include <wingdi.h>],
-               [GdiFlush();],
-               [ dnl worked!
-               AC_MSG_RESULT([yes])],
-               [ dnl failed, restore LIBS
-               LIBS=$my_ac_save_LIBS
-               AC_MSG_RESULT(no)]
-              )
-
-    AC_CHECK_LIB(crypto, CRYPTO_add_lock)
     AC_CHECK_LIB(ssl, SSL_connect)
 
     if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
@@ -811,7 +884,11 @@ else
 
        dnl is there a pkcs12.h header present?
        AC_CHECK_HEADERS(openssl/pkcs12.h)
+    else
+       LIBS="$CLEANLIBS"
     fi
+    dnl USE_SSLEAY is the historical name for what configure calls
+    dnl OPENSSL_ENABLED; the names should really be unified
     USE_SSLEAY="$OPENSSL_ENABLED"
     AC_SUBST(USE_SSLEAY)
 
@@ -828,8 +905,12 @@ dnl **********************************************************************
 
   if test X"$OPENSSL_ENABLED" = X"1"; then
     dnl If the ENGINE library seems to be around, check for the OpenSSL engine
-    dnl header, it is kind of "separated" from the main SSL check
-    AC_CHECK_FUNC(ENGINE_init, [ AC_CHECK_HEADERS(openssl/engine.h) ])
+    dnl stuff, it is kind of "separated" from the main SSL check
+    AC_CHECK_FUNC(ENGINE_init,
+              [
+                AC_CHECK_HEADERS(openssl/engine.h)
+                AC_CHECK_FUNCS( ENGINE_load_builtin_engines )
+              ])
 
     AC_MSG_CHECKING([CA cert bundle install path])
 
@@ -916,71 +997,78 @@ dnl Check for & handle argument to --with-zlib.
 
 _cppflags=$CPPFLAGS
 _ldflags=$LDFLAGS
-OPT_ZLIB="/usr/local"
 AC_ARG_WITH(zlib,
 AC_HELP_STRING([--with-zlib=PATH],[search for zlib in PATH])
 AC_HELP_STRING([--without-zlib],[disable use of zlib]),
                [OPT_ZLIB="$withval"])
 
-case "$OPT_ZLIB" in
-  no)
-    AC_MSG_WARN([zlib disabled]) ;;
-  *)
+if test "$OPT_ZLIB" = "no" ; then
+    AC_MSG_WARN([zlib disabled])
+else
+  if test "$OPT_ZLIB" = "yes" ; then
+     OPT_ZLIB=""
+  fi
+
+  if test -z "$OPT_ZLIB" ; then
     dnl check for the lib first without setting any new path, since many
     dnl people have it in the default path
 
     AC_CHECK_LIB(z, inflateEnd,
                    dnl libz found, set the variable
                    [HAVE_LIBZ="1"],
-                   dnl if no lib found, try to add the given library
-                   [if test -d "$OPT_ZLIB"; then
-                      CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
-                      LDFLAGS="$LDFLAGS -L$OPT_ZLIB/lib$libsuff"
-                   fi])
+                   dnl if no lib found, try /usr/local
+                   [OPT_ZLIB="/usr/local"])
 
-    AC_CHECK_HEADER(zlib.h,
-      [
-      dnl zlib.h was found
-      HAVE_ZLIB_H="1"
-      dnl if the lib wasn't found already, try again with the new paths
-      if test "$HAVE_LIBZ" != "1"; then
-        AC_CHECK_LIB(z, gzread,
-                     [
-                     dnl the lib was found!
-                     HAVE_LIBZ="1"
-                     ],
-                     [ CPPFLAGS=$_cppflags
-                     LDFLAGS=$_ldflags])
-      fi
-      ],
-      [
-        dnl zlib.h was not found, restore the flags
-        CPPFLAGS=$_cppflags
-        LDFLAGS=$_ldflags]
-      )
+  fi
 
-    if test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" != "1"
-    then
-      AC_MSG_WARN([configure found only the libz lib, not the header file!])
-    elif test "$HAVE_LIBZ" != "1" && test "$HAVE_ZLIB_H" = "1"
-    then
-      AC_MSG_WARN([configure found only the libz header file, not the lib!])
-    elif test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" = "1"
-    then
-      dnl both header and lib were found!
-      AC_SUBST(HAVE_LIBZ)
-      AC_DEFINE(HAVE_ZLIB_H, 1, [if you have the zlib.h header file])
-      AC_DEFINE(HAVE_LIBZ, 1, [if zlib is available])
+  dnl Add a nonempty path to the compiler flags
+  if test -n "$OPT_ZLIB"; then
+     CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
+     LDFLAGS="$LDFLAGS -L$OPT_ZLIB/lib$libsuff"
+  fi
 
-      LIBS="$LIBS -lz"
-
-      dnl replace 'HAVE_LIBZ' in the automake makefile.ams
-      AMFIXLIB="1"
-      AC_MSG_NOTICE([found both libz and libz.h header])
-      curl_zlib_msg="enabled"
+  AC_CHECK_HEADER(zlib.h,
+    [
+    dnl zlib.h was found
+    HAVE_ZLIB_H="1"
+    dnl if the lib wasn't found already, try again with the new paths
+    if test "$HAVE_LIBZ" != "1"; then
+      AC_CHECK_LIB(z, gzread,
+                   [
+                   dnl the lib was found!
+                   HAVE_LIBZ="1"
+                   ],
+                   [ CPPFLAGS=$_cppflags
+                   LDFLAGS=$_ldflags])
     fi
-    ;;
-esac
+    ],
+    [
+      dnl zlib.h was not found, restore the flags
+      CPPFLAGS=$_cppflags
+      LDFLAGS=$_ldflags]
+    )
+
+  if test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" != "1"
+  then
+    AC_MSG_WARN([configure found only the libz lib, not the header file!])
+  elif test "$HAVE_LIBZ" != "1" && test "$HAVE_ZLIB_H" = "1"
+  then
+    AC_MSG_WARN([configure found only the libz header file, not the lib!])
+  elif test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" = "1"
+  then
+    dnl both header and lib were found!
+    AC_SUBST(HAVE_LIBZ)
+    AC_DEFINE(HAVE_ZLIB_H, 1, [if you have the zlib.h header file])
+    AC_DEFINE(HAVE_LIBZ, 1, [if zlib is available])
+
+    LIBS="$LIBS -lz"
+
+    dnl replace 'HAVE_LIBZ' in the automake makefile.ams
+    AMFIXLIB="1"
+    AC_MSG_NOTICE([found both libz and libz.h header])
+    curl_zlib_msg="enabled"
+  fi
+fi
 
 dnl set variable for use in automakefile(s)
 AM_CONDITIONAL(HAVE_LIBZ, test x"$AMFIXLIB" = x1)
@@ -1023,6 +1111,7 @@ case "$LIBIDN" in
 
        if test "x$idn" = "xyes"; then
          curl_idn_msg="enabled"
+         AC_SUBST(IDN_ENABLED, [1])
          dnl different versions of libidn have different setups of these:
          AC_CHECK_FUNCS( idn_free idna_strerror tld_strerror)
          AC_CHECK_HEADERS( idn-free.h tld.h )
@@ -1171,6 +1260,7 @@ AC_CHECK_HEADERS(
         sys/resource.h \
         libgen.h \
         locale.h \
+        errno.h \
         setjmp.h,
 dnl to do if not found
 [],
@@ -1243,7 +1333,6 @@ AC_CHECK_FUNCS( strtoll \
                 strdup \
                 strstr \
                 strtok_r \
-                strftime \
                 uname \
                 strcasecmp \
                 stricmp \
@@ -1253,8 +1342,6 @@ AC_CHECK_FUNCS( strtoll \
                 inet_addr \
                 inet_ntoa \
                 inet_pton \
-                tcsetattr \
-                tcgetattr \
                 perror \
                 closesocket \
                 siginterrupt \
@@ -1495,6 +1582,28 @@ AC_HELP_STRING([--disable-verbose],[Disable verbose strings]),
        AC_MSG_RESULT(yes)
 )
 
+dnl ************************************************************
+dnl enable SSPI support
+dnl
+AC_MSG_CHECKING([whether to enable SSPI support (win32 builds only)])
+AC_ARG_ENABLE(sspi,
+AC_HELP_STRING([--enable-sspi],[Enable SSPI])
+AC_HELP_STRING([--disable-sspi],[Disable SSPI]),
+[ case "$enableval" in
+  yes)
+       AC_MSG_RESULT(yes)
+       AC_DEFINE(USE_WINDOWS_SSPI, 1, [to enable SSPI support])
+       AC_SUBST(USE_WINDOWS_SSPI)
+       LIBS="$LIBS -lsecur32"
+       curl_sspi_msg="yes"
+       ;;
+  *)
+       AC_MSG_RESULT(no)
+       ;;
+  esac ],
+       AC_MSG_RESULT(no)
+)
+
 dnl ************************************************************
 dnl lame option to switch on debug options
 dnl
@@ -1558,6 +1667,17 @@ AC_HELP_STRING([--disable-cookies],[Disable cookies support]),
        AC_MSG_RESULT(yes)
 )
 
+if test "x$ws2" = "xyes"; then
+
+  dnl If ws2_32 is wanted, make sure it is the _last_ lib in LIBS (makes
+  dnl things work when built with c-ares). But we can't just move it last
+  dnl since then other stuff (SSL) won't build. So we simply append it to the
+  dnl end.
+
+  LIBS="$LIBS -lws2_32"
+
+fi
+
 AM_CONDITIONAL(CROSSCOMPILING, test x$cross_compiling = xyes)
 
 AC_CONFIG_FILES([Makefile \
@@ -1606,4 +1726,5 @@ AC_MSG_NOTICE([Configured to build curl/libcurl:
   Build libcurl:   Shared=${enable_shared}, Static=${enable_static} 
   Built-in manual: ${curl_manual_msg}
   Verbose errors:  ${curl_verbose_msg}
+  SSPI support:    ${curl_sspi_msg}
 ])

curl-config.in

@@ -19,7 +19,8 @@ Available values for OPTION include:
   --ca        ca bundle install path
   --cc        compiler
   --cflags    pre-processor and compiler flags
-  --feature   newline separated list of enabled features
+  --features  newline separated list of enabled features
+  --protocols newline separated list of enabled protocols
   --help      display this help and exit
   --libs      library linking information
   --prefix    curl install prefix
@@ -56,9 +57,10 @@ while test $# -gt 0; do
 	echo "$prefix"
 	;;
 
-    --feature)
+    --feature|--features)
 	if test "@USE_SSLEAY@" = "1"; then
           echo "SSL"
+          NTLM=1
         fi
 	if test "@KRB4_ENABLED@" = "1"; then
           echo "KRB4"
@@ -69,32 +71,50 @@ while test $# -gt 0; do
 	if test "@HAVE_LIBZ@" = "1"; then
           echo "libz"
         fi
-	if test "@CURL_DISABLE_HTTP@" = "1"; then
-          echo "HTTP-disabled"
-        fi
-	if test "@CURL_DISABLE_FTP@" = "1"; then
-          echo "FTP-disabled"
-        fi
-	if test "@CURL_DISABLE_GOPHER@" = "1"; then
-          echo "GOPHER-disabled"
-        fi
-	if test "@CURL_DISABLE_FILE@" = "1"; then
-          echo "FILE-disabled"
-        fi
-	if test "@CURL_DISABLE_TELNET@" = "1"; then
-          echo "TELNET-disabled"
-        fi
-	if test "@CURL_DISABLE_LDAP@" = "1"; then
-          echo "LDAP-disabled"
-        fi
-	if test "@CURL_DISABLE_DICT@" = "1"; then
-          echo "DICT-disabled"
-        fi
 	if test "@HAVE_ARES@" = "1"; then
           echo "AsynchDNS"
         fi
+	if test "@IDN_ENABLED@" = "1"; then
+          echo "IDN"
+        fi
+	if test "@USE_WINDOWS_SSPI@" = "1"; then
+          echo "SSPI"
+          NTLM=1
+        fi
+	if test "$NTLM" = "1"; then
+          echo "NTLM"
+        fi
 	;;
 
+    --protocols)
+	if test "@CURL_DISABLE_HTTP@" != "1"; then
+          echo "HTTP"
+	  if test "@USE_SSLEAY@" = "1"; then
+            echo "HTTPS"
+          fi
+        fi
+	if test "@CURL_DISABLE_FTP@" != "1"; then
+          echo "FTP"
+	  if test "@USE_SSLEAY@" = "1"; then
+            echo "FTPS"
+          fi
+        fi
+	if test "@CURL_DISABLE_GOPHER@" != "1"; then
+          echo "GOPHER"
+        fi
+	if test "@CURL_DISABLE_FILE@" != "1"; then
+          echo "FILE"
+        fi
+	if test "@CURL_DISABLE_TELNET@" != "1"; then
+          echo "TELNET"
+        fi
+	if test "@CURL_DISABLE_LDAP@" != "1"; then
+          echo "LDAP"
+        fi
+	if test "@CURL_DISABLE_DICT@" != "1"; then
+          echo "DICT"
+        fi
+	;;
     --version)
 	echo libcurl @VERSION@
 	exit 0
@@ -123,8 +143,7 @@ while test $# -gt 0; do
 
     *)
         echo "unknown option: $1"
-	usage
-	exit 1
+	usage 1
 	;;
     esac
     shift

docs/BINDINGS

@@ -25,10 +25,14 @@ Basic
   ScriptBasic bindings to libcurl. Writtten by Peter Verhas
   http://scriptbasic.com/
 
+C
+  libcurl is a C library in itself!
+  http://curl.haxx.se/libcurl/
+
 C++
 
   Written by Jean-Philippe Barrette-LaPierre
-  http://www.sourceforge.net/projects/curlpp
+  http://rrette.com/curlpp.html
 
 Ch
 
@@ -68,24 +72,29 @@ glib/GTK+
 
 Java
 
-  Written by Daniel Stenberg
+  Maintained by Vic Hanson
   http://curl.haxx.se/libcurl/java/
 
+Lisp
+
+  Written by Liam Healy
+  http://common-lisp.net/project/cl-curl/
+
 Lua
 
   Written by Steve Dekorte
   http://curl.haxx.se/libcurl/lua/
 
-.NET
-
-  Written by Jeffrey Phillips
-  http://www.seasideresearch.com/downloads.html
-
 Mono
 
   Written by Jeffrey Phillips
   http://forge.novell.com/modules/xfmod/project/?libcurl-mono
 
+.NET
+
+  libcurl-net Written by Jeffrey Phillips
+  http://sourceforge.net/projects/libcurl-net/
+
 Object-Pascal
 
   Free Pascal, Delphi and Kylix binding written by Christophe Espern.
@@ -146,6 +155,11 @@ Tcl
   Tclcurl is written by Andr<64>s Garc<72>a
   http://personal1.iddeo.es/andresgarci/tclcurl/english/docs.html
 
+Visual Basic
+
+  libcurl-vb is written by Jeffrey Phillips
+  http://sourceforge.net/projects/libcurl-vb/
+
 Q
 
   http://q-lang.sourceforge.net/

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: August 18, 2004 (http://curl.haxx.se/docs/faq.html)
+Updated: December 21, 2004 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -42,6 +42,7 @@ FAQ
   3.14 Does curl support javascript or pac (automated proxy config)?
   3.15 Can I do recursive fetches with curl?
   3.16 What certificates do I need when I use SSL?
+  3.17 How do I list the root dir of an FTP server?
 
  4. Running Problems
   4.1 Problems connecting to SSL servers.
@@ -520,6 +521,18 @@ FAQ
     that was signed by one of the authorities in the bundle. curl comes with a
     default CA cert bundle. You can override the default.
 
+  3.17 How do I list the root dir of an FTP server?
+
+  There are two ways. The way defined in the RFC is to use an encoded slash
+  in the first path part. List the "/tmp" dir like this:
+
+     curl ftp://ftp.sunet.se/%2ftmp/
+
+  or the not-quite-kosher-but-more-readable way, by simply starting the path
+  section of the URL with a slash:
+
+     curl ftp://ftp.sunet.se//tmp/
+
 
 4. Running Problems
 
@@ -623,7 +636,10 @@ FAQ
 
   4.6 Can you tell me what error code 142 means?
 
-  All error codes that are larger than the highest documented error code means
+  All curl error codes are described at the end of the man page, in the
+  section called "EXIT CODES".
+
+  Error codes that are larger than the highest documented error code means
   that curl has exited due to a crash. This is a serious error, and we
   appreciate a detailed bug report from you that describes how we could go
   ahead and repeat this!
@@ -806,13 +822,13 @@ FAQ
   When building an application that uses the static libcurl library, you must
   add -DCURL_STATICLIB to your CFLAGS. Otherwise the linker will look for
   dynamic import symbols. If you get linker error like "unknown symbol
-  __imp__curl_easy_init ..." you have linked against the wrong (static) library.
-  If you want to use the curl.dll and import lib, you don't need any extra CFLAGS,
-  but use one of the import libraries below. These are the libraries produced by
-  the various lib/Makefile.* files:
+  __imp__curl_easy_init ..." you have linked against the wrong (static)
+  library.  If you want to use the libcurl.dll and import lib, you don't need
+  any extra CFLAGS, but use one of the import libraries below. These are the
+  libraries produced by the various lib/Makefile.* files:
 
-  Target:          static lib.   import lib for curl*.dll.
-  --------------------------------------------------------
+  Target:          static lib.   import lib for libcurl*.dll.
+  -----------------------------------------------------------
   MingW:           libcurl.a     libcurldll.a
   MSVC (release):  libcurl.lib   libcurl_imp.lib
   MSVC (debug):    libcurld.lib  libcurld_imp.lib

docs/INSTALL

@@ -1,7 +1,7 @@
-                                  _   _ ____  _     
-                              ___| | | |  _ \| |    
-                             / __| | | | |_) | |    
-                            | (__| |_| |  _ <| |___ 
+                                  _   _ ____  _
+                              ___| | | |  _ \| |
+                             / __| | | | |_) | |
+                            | (__| |_| |  _ <| |___
                              \___|\___/|_| \_\_____|
 
                                 How To Compile
@@ -75,7 +75,7 @@ UNIX
            ./configure
 
      (with csh, tcsh and their clones):
-     
+
        env CPPFLAGS="-I/path/to/ssl/include" LDFLAGS="-L/path/to/ssl/lib" \
        ./configure
 
@@ -131,7 +131,7 @@ UNIX
 
 Win32
 =====
- 
+
    Without SSL:
 
       MingW32 (GCC-2.95) style
@@ -199,8 +199,8 @@ Win32
         Then run 'nmake vc' in curl's root directory.
 
         If you want to compile with zlib support, you will need to build
-        zlib (http://www.gzip.org/zlib/) as well. Please read the zlib 
-        documentation on how to compile zlib. Define the ZLIB_PATH environment 
+        zlib (http://www.gzip.org/zlib/) as well. Please read the zlib
+        documentation on how to compile zlib. Define the ZLIB_PATH environment
         variable to the location of zlib.h and zlib.lib, for example:
 
           set ZLIB_PATH=c:\zlib-1.2.1
@@ -229,7 +229,7 @@ Win32
         'nmake vc-ssl-dll' creates the libcurl dynamic library and
         links curl.exe against libcurl and OpenSSL dynamically.
         This executable requires libcurl.dll and the OpenSSL DLLs
-        at runtime. 
+        at runtime.
         Run 'nmake vc-ssl-zlib' to build with both ssl and zlib support.
 
       Microsoft / Borland style
@@ -241,27 +241,27 @@ Win32
       Using Borland C++ compiler version 5.5.1 (available as free download
       from Borland's site)
       ---------------------------------------------------------------------
-      
+
         compile openssl
-      
+
         Make sure you include the paths to curl/include and openssl/inc32 in
         your bcc32.cnf file
-      
+
 
         eg : -I"c:\Bcc55\include;c:\path_curl\include;c:\path_openssl\inc32"
-        
+
         Check to make sure that all of the sources listed in lib/Makefile.b32
         are present in the /path_to_curl/lib directory. (Check the src
         directory for missing ones.)
-        
+
         Make sure the environment variable "BCCDIR" is set to the install
         location for the compiler eg : c:\Borland\BCC55
-        
+
         command line:
         make -f /path_to_curl/lib/Makefile-ssl.b32
-        
+
         compile simplessl.c with appropriate links
-        
+
         c:\curl\docs\examples\> bcc32 -L c:\path_to_curl\lib\libcurl.lib
                                       -L c:\borland\bcc55\lib\psdk\ws2_32.lib
                                       -L c:\openssl\out32\libeay32.lib
@@ -293,6 +293,13 @@ Win32
       - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
         in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.
 
+
+   Important (with SSL or not):
+      When building an application that uses the static libcurl library, you
+      must add '-DCURL_STATICLIB' to your CFLAGS.  Otherwise the linker will
+      look for dynamic import symbols.
+
+
 IBM OS/2
 ========
 
@@ -373,7 +380,7 @@ VMS
       1 = Success
       2 = Error
       3 = Information
-      4 = Fatal 
+      4 = Fatal
       <5-7> reserved.
 
    This all presents itself with:
@@ -449,10 +456,10 @@ NetWare
    - either any gcc / nlmconv, or CodeWarrior 7 PDK 4 or later.
    - gnu make and awk running on the platform you compile on;
      native Win32 versions can be downloaded from:
-     http://www.gknw.com/development/prgtools/ 
+     http://www.gknw.com/development/prgtools/
    - recent Novell LibC SDK available from:
      http://developer.novell.com/ndk/libc.htm
-   - optional zlib sources (at the moment only dynamic linking with zlib.imp); 
+   - optional zlib sources (at the moment only dynamic linking with zlib.imp);
      sources with NetWare Makefile can be obtained from:
      http://www.gknw.com/mirror/zlib/
 
@@ -464,7 +471,7 @@ NetWare
    a 'set | grep OSTYPE' shows the var present and set; I simply overwrote it
    with 'OSTYPE=linux-rh9-gnu' and the detection in the Makefile worked...;
    other options are currently not supported, although partly prepared.
-   The Ares lib builds arlready fine, and both test tools work fine at least 
+   The Ares lib builds arlready fine, and both test tools work fine at least
    when build with CodeWarrior...; don't know yet why they fail when build with
    gcc though; if you want to compile with Ares support then set an env var
    WITH_ARES=1; I've not tested yet including libares into curl.
@@ -604,7 +611,7 @@ PORTS
         - m68k Linux
         - m68k OpenBSD
         - m88k dg-dgux5.4R3.00
-        - s390 Linux 
+        - s390 Linux
         - XScale/PXA250 Linux 2.4
 
 Useful URLs

docs/KNOWN_BUGS

@@ -3,58 +3,101 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
-* Test case 165 might fail on system which has libidn present, but with an
+22. Sending files to a FTP server using curl on VMS, might lead to curl
+  complaining on "unaligned file size" on completion. The problem is related
+  to VMS file structures and the perceived file sizes stat() returns. A
+  possible fix would involve sending a "STRU VMS" command.
+  http://sourceforge.net/support/tracker.php?aid=1156287
+  
+21. FTP ASCII transfers do not follow RFC959. They don't convert the data
+   accordingly (not for sending nor for receiving). RFC 959 section 3.1.1.1
+   clearly describes how this should be done:
+
+     The sender converts the data from an internal character representation to
+     the standard 8-bit NVT-ASCII representation (see the Telnet
+     specification).  The receiver will convert the data from the standard
+     form to his own internal form.
+
+20. valgrind errors occur too often when 'make test' is used. It is because
+  too many third-party libs and tools have problems. When curl is built
+  without --disable-shared, the testing is done with a front-end script which
+  makes the valgrind testing include (ba)sh as well and that often causes
+  valgrind errors. Either we improve the valgrind error scanner a lot to
+  better identify (lib)curl errors only, or we disable valgrind checking by
+  default.
+
+19. FTP 3rd party transfers with the multi interface doesn't work. Test:
+  define CURL_MULTIEASY, rebuild curl, run test case 230 - 232.
+
+18. test case 57 has </test> that should be </client> but when corrected, the
+  test case fails!
+
+16. FTP URLs passed to curl may contain NUL (0x00) in the RFC 1738 <user>,
+  <password>, and <fpath> components, encoded as "%00".  The problem is that
+  curl_unescape does not detect this, but instead returns a shortened C
+  string.  From a strict FTP protocol standpoint, NUL is a valid character
+  within RFC 959 <string>, so the way to handle this correctly in curl would
+  be to use a data structure other than a plain C string, one that can handle
+  embedded NUL characters.  From a practical standpoint, most FTP servers
+  would not meaningfully support NUL characters within RFC 959 <string>,
+  anyway (e.g., UNIX pathnames may not contain NUL).
+
+15. Test case 241 fails on all systems that support IPv6 but that don't have
+  the host name 'ip6-localhost' in /etc/hosts (or similar) since the test case
+  uses that host name to test the IPv6 name to address resolver.
+
+14. Test case 165 might fail on system which has libidn present, but with an
   old iconv version (2.1.3 is a known bad version), since it doesn't recognize
   the charset when named ISO8859-1. Changing the name to ISO-8859-1 makes the
   test pass, but instead makes it fail on Solaris hosts that use its native
   iconv.
 
-* curl version 7.12.2 fails on AIX if compiled with --enable-ares.
+13. curl version 7.12.2 fails on AIX if compiled with --enable-ares.
   The workaround is to combine --enable-ares with --disable-shared
 
-* When connecting to a SOCKS proxy, the (connect) timeout is not properly
+12. When connecting to a SOCKS proxy, the (connect) timeout is not properly
   acknowledged after the actual TCP connect (during the SOCKS "negotiate"
   phase). Pointed out by Lucas. Fix: need to select() and timeout properly.
 
-* Using configure --disable-[protocol] may cause 'make test' to fail for
+11. Using configure --disable-[protocol] may cause 'make test' to fail for
   tests using the disabled protocol(s).
 
-* To get HTTP Negotiate authentication to work fine, you need to provide a
+10. To get HTTP Negotiate authentication to work fine, you need to provide a
   (fake) user name (this concerns both curl and the lib) because the code
   wrongly only considers authentication if there's a user name provided.
   Bug report #1004841. How? http://curl.haxx.se/mail/lib-2004-08/0182.html
 
-* --limit-rate using -d or -F does not work. This is because the limit logic
+9. --limit-rate using -d or -F does not work. This is because the limit logic
   is provided by the curl app in its read/write callbacks, and when doing
   -d/-F the callbacks aren't used! Bug report #921395.
 
-* Doing resumed upload over HTTP does not work with '-C -', because curl
+8. Doing resumed upload over HTTP does not work with '-C -', because curl
   doesn't do a HEAD first to get the initial size. This needs to be done
   manually for HTTP PUT resume to work, and then '-C [index]'.
 
-* CURLOPT_USERPWD and CURLOPT_PROXYUSERPWD have no way of providing user names
+7. CURLOPT_USERPWD and CURLOPT_PROXYUSERPWD have no way of providing user names
   that contain a colon. This can't be fixed easily in a backwards compatible
   way without adding new options (and then, they should most probably allow
   setting user name and password separately).
 
-* libcurl ignores empty path parts in FTP URLs, whereas RFC1738 states that
+6. libcurl ignores empty path parts in FTP URLs, whereas RFC1738 states that
   such parts should be sent to the server as 'CWD ' (without an argument).
   The only exception to this rule, is that we knowingly break this if the
   empty part is first in the path, as then we use the double slashes to
   indicate that the user wants to reach the root dir (this exception SHALL
   remain even when this bug is fixed).
 
-* libcurl doesn't treat the content-length of compressed data properly, as
+5. libcurl doesn't treat the content-length of compressed data properly, as
   it seems HTTP servers send the *uncompressed* length in that header and
-  libcurl thinks of it as the *compressed* lenght. Some explanations are here:
+  libcurl thinks of it as the *compressed* length. Some explanations are here:
   http://curl.haxx.se/mail/lib-2003-06/0146.html
 
-* IPv6 support on AIX 4.3.3 doesn't work due to a missing sockaddr_storage
+4. IPv6 support on AIX 4.3.3 doesn't work due to a missing sockaddr_storage
   struct. It has been reported to work on AIX 5.1 though.
 
-* GOPHER transfers seem broken
+3. GOPHER transfers seem broken
 
-* If a HTTP server responds to a HEAD request and includes a body (thus
+2. If a HTTP server responds to a HEAD request and includes a body (thus
   violating the RFC2616), curl won't wait to read the response but just stop
   reading and return back. If a second request (let's assume a GET) is then
   immediately made to the same server again, the connection will be re-used

docs/MANUAL

@@ -299,6 +299,13 @@ POST (HTTP)
 
         curl -F "docpicture=@dog.gif" -F "catpicture=@cat.gif" 
 
+  To send a field value literally without interpreting a leading '@'
+  or '<', or an embedded ';type=', use --form-string instead of
+  -F. This is recommended when the value is obtained from a user or
+  some other unpredictable source. Under these circumstances, using
+  -F instead of --form-string would allow a user to trick curl into
+  uploading a file.
+
 REFERRER
 
   A HTTP request has the option to include information about which address

docs/TODO

@@ -36,6 +36,9 @@ TODO
  * Use 'struct lifreq' and SIOCGLIFADDR instead of 'struct ifreq' and
    SIOCGIFADDR on newer Solaris versions as they claim the latter is obsolete.
 
+ * Add the following to curl_easy_getinfo(): GET_HTTP_IP, GET_FTP_IP and
+   GET_FTP_DATA_IP. Return a string with the used IP. Suggested by Alan.
+
  LIBCURL - multi interface
 
  * Add a curl_multi_fdset() alternative that returns only two arrays with file
@@ -62,6 +65,12 @@ TODO
 
  FTP
 
+ * Make the detection of (bad) %0d and %0a codes in FTP url parts earlier in
+   the process to avoid doing a resolve and connect in vain.
+
+ * Code overhaul to make it more state-machine like and to _never_ block on
+   waiting for server responses when used with the multi interface.
+
  * Support GSS/Kerberos 5 for ftp file transfer. This will allow user
    authentication and file encryption.  Possible libraries and example clients
    are available from MIT or Heimdal. Requsted by Markus Moeller.
@@ -96,6 +105,10 @@ TODO
    This could possibly be implemented using the multi interface to queue
    requests and the response data.
 
+ * When doing CONNECT to a HTTP proxy, libcurl always uses HTTP/1.0. This has
+   never been reported as causing trouble to anyone, but should be considered
+   to use the HTTP version the user has chosen.
+
  TELNET
 
  * Reading input (to send to the remote server) on stdin is a crappy solution
@@ -148,6 +161,22 @@ TODO
    lib/ldap.c source file and get moved to the main network code so that the
    multi interface and friends will work for LDAP as well.
 
+ NEW PROTOCOLS
+
+ * TFTP - RFC1350 (protocol) and RFC3617 (URI format)
+
+   Dan Fandrich: I wrote a tftp protocol module as part of the I-Boot
+   bootloader under a BSD-style license with attribution clause
+   http://download.intrinsyc.com/supported/tools/i-boot-lite/i-boot-lite-1.8/src/libs/net/tftp.c
+
+ * RTSP - RFC2326 (protocol - very HTTP-like, also contains URL description)
+
+ * SFTP/SCP/SSH (no RFCs for protocol nor URI/URL format). An implementation
+   should most probably use an existing ssh library, such as OpenSSH.
+
+ * RSYNC (no RFCs for protocol nor URI/URL format).  An implementation should
+   most probably use an existing rsync library, such as librsync.
+
  CLIENT
 
  * "curl --sync http://example.com/feed[1-100].rss" or
@@ -210,7 +239,7 @@ TODO
 
  * Consider extending 'roffit' to produce decent ASCII output, and use that
    instead of (g)nroff when building src/hugehelp.c
-  
+
  TEST SUITE
 
  * Make the test servers able to serve multiple running test suites. Like if

docs/TheArtOfHttpScripting

@@ -1,4 +1,4 @@
-Online:  http://curl.haxx.se/docs/httpscripting.shtml
+Online:  http://curl.haxx.se/docs/httpscripting.html
 Date:    December 9, 2004
 
                 The Art Of Scripting HTTP Requests Using Curl

docs/curl-config.1

@@ -1,8 +1,27 @@
-.\" You can view this file with:
-.\" nroff -man curl-config.1
-.\" Written by Daniel Stenberg
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" * $Id$
+.\" **************************************************************************
 .\"
-.TH curl-config 1 "11 Dec 2004" "Curl 7.10" "curl-config manual"
+.TH curl-config 1 "25 Jan 2004" "Curl 7.13.0" "curl-config manual"
 .SH NAME
 curl-config \- Get information about a libcurl installation
 .SH SYNOPSIS
@@ -32,6 +51,12 @@ to link your application with libcurl.
 This is the prefix used when libcurl was installed. Libcurl is then installed
 in $prefix/lib and its header files are installed in $prefix/include and so
 on. The prefix is set with "configure --prefix".
+.IP "--protocols"
+Lists what particular protocols the installed libcurl was built to support. At
+the time of writing, this list may include HTTP, HTTPS, FTP, FTPS, GOPHER,
+FILE, TELNET, LDAP, DICT. Do not assume any particular order. The protocols
+will be listed using uppercase and are separated by newlines. There may be
+none, one or several protocols in the list. (Added in 7.13.0)
 .IP "--version"
 Outputs version information about the installed libcurl.
 .IP "--vernum"

docs/curl.1

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl 1 "7 Dec 2004" "Curl 7.12.3" "Curl Manual"
+.TH curl 1 "29 Mar 2005" "Curl 7.13.2" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -120,9 +120,9 @@ using \fI-D/--dump-header\fP!
 If this option is set more than once, the last one will be the one that's
 used.
 .IP "-B/--use-ascii"
-Use ASCII transfer when getting an FTP file or LDAP info. For FTP, this can
-also be enforced by using an URL that ends with ";type=A". This option causes
-data sent to stdout to be in text mode for win32 systems.
+Enable ASCII transfer when using FTP or LDAP. For FTP, this can also be
+enforced by using an URL that ends with ";type=A". This option causes data
+sent to stdout to be in text mode for win32 systems.
 
 If this option is used twice, the second one will disable ASCII usage.
 .IP "--basic"
@@ -267,7 +267,7 @@ If this option is used several times, the last one will be used.
 be set with the \fI-H/--header\fP flag of course.  When used with
 \fI-L/--location\fP you can append ";auto" to the referer URL to make curl
 automatically set the previous URL when it follows a Location: header. The
-";auto" string can be used alone, even if you don't set an initial referer.
+\&";auto" string can be used alone, even if you don't set an initial referer.
 
 If this option is used several times, the last one will be used.
 .IP "--engine <name>"
@@ -330,6 +330,12 @@ document stating so (which often also describes why and more). This flag will
 prevent curl from outputting that and fail silently instead.
 
 If this option is used twice, the second will again disable silent failure.
+.IP "--ftp-account [data]"
+(FTP) When an FTP server asks for "account data" after user name and password
+has been provided, this data is sent off using the ACCT command. (Added in
+7.13.0)
+
+If this option is used twice, the second will override the previous use.
 .IP "--ftp-create-dirs"
 (FTP) When an FTP URL/operation uses a path that doesn't currently exist on
 the server, the standard behavior of curl is to fail. Using this option, curl
@@ -337,7 +343,7 @@ will instead attempt to create missing directories. (Added in 7.10.7)
 
 If this option is used twice, the second will again disable silent failure.
 .IP "--ftp-pasv"
-(FTP) Use PASV when transfering. PASV is the internal default behavior, but
+(FTP) Use PASV when transferring. PASV is the internal default behavior, but
 using this option can be used to override a previous --ftp-port option. (Added
 in 7.11.0)
 
@@ -374,9 +380,20 @@ or
 
 \fBcurl\fP -F "name=daniel;type=text/foo" url.com
 
+You can also explicitly change the name field of an file upload part by
+setting filename=, like this:
+
+\fBcurl\fP -F "file=@localfile;filename=nameinpost" url.com
+
 See further examples and details in the MANUAL.
 
 This option can be used multiple times.
+.IP "--form-string <name=string>"
+(HTTP) Similar to \fI--form\fP except that the value string for the named
+parameter is used literally. Leading \&'@' and \&'<' characters, and the
+\&';type=' string in the value have no special meaning. Use this in preference
+to \fI--form\fP if there's any possibility that the string value may
+accidentally trigger the \&'@' or \&'<' features of \fI--form\fP.
 .IP "-g/--globoff"
 This option switches off the "URL globbing parser". When you set this option,
 you can specify URLs that contain the letters {}[] without having them being
@@ -622,11 +639,21 @@ dynamically.
 Write output to a local file named like the remote file we get. (Only the file
 part of the remote file is used, the path is cut off.)
 
+The remote file name to use for saving is extracted from the given URL.
+Nothing else
+
 You may use this option as many times as you have number of URLs.
 .IP "--pass <phrase>"
 (SSL) Pass phrase for the private key
 
 If this option is used several times, the last one will be used.
+.IP "--proxy-anyauth"
+Tells curl to pick a suitable authentication method when communicating with
+the given proxy. This will cause an extra request/response round-trip. Added
+in curl 7.13.2.
+
+If this option is used twice, the second will again disable the proxy use-any
+authentication.
 .IP "--proxy-basic"
 Tells curl to use HTTP Basic authentication when communicating with the given
 proxy. Use \fI--basic\fP for enabling HTTP Basic with a remote host. Basic is
@@ -675,11 +702,13 @@ instead of PORT by using \fI--disable-eprt\fP. EPRT is really PORT++.
 .IP "-q"
 If used as the first parameter on the command line, the \fI$HOME/.curlrc\fP
 file will not be read and used as a config file.
-.IP "-Q/--quote <comand>"
+.IP "-Q/--quote <command>"
 (FTP) Send an arbitrary command to the remote FTP server. Quote commands are
-sent BEFORE the transfer is taking place. To make commands take place after a
-successful transfer, prefix them with a dash '-'. You may specify any amount
-of commands to be run before and after the transfer. If the server returns
+sent BEFORE the transfer is taking place (just after the initial PWD command
+to be exact). To make commands take place after a successful transfer, prefix
+them with a dash '-'. To make commands get sent after libcurl has changed
+working directory, just before the transfer command(s), prefix the command
+with '+'. You may specify any amount of commands. If the server returns
 failure for one of the commands, the entire operation will be aborted. You
 must send syntactically correct FTP commands as RFC959 defines.
 
@@ -842,7 +871,8 @@ to read for untrained humans.
 If this option is used several times, the last one will be used. (Added in
 7.9.7)
 .IP "-u/--user <user:password>"
-Specify user and password to use for server authentication.
+Specify user and password to use for server authentication. Overrides
+\fI-n/--netrc\fP and \fI--netrc-optional\fP.
 
 If this option is used several times, the last one will be used.
 .IP "-U/--proxy-user <user:password>"
@@ -931,6 +961,10 @@ to follow location: headers.
 .B http_code
 The numerical code that was found in the last retrieved HTTP(S) page.
 .TP
+.B http_connect
+The numerical code that was found in the last response (from a proxy) to a
+curl CONNECT request. (Added in 7.12.4)
+.TP
 .B time_total
 The total time, in seconds, that the full operation lasted. The time will be
 displayed with millisecond resolution.
@@ -1058,6 +1092,17 @@ Forces curl to use SSL version 2 when negotiating with a remote SSL server.
 .IP "-3/--sslv3"
 (HTTPS)
 Forces curl to use SSL version 3 when negotiating with a remote SSL server.
+.IP "--3p-quote"
+(FTP) Specify arbitrary commands to send to the source server. See the
+\fI-Q/--quote\fP option for details. (Added in 7.13.0)
+.IP "--3p-url"
+(FTP) Activates a FTP 3rd party transfer. Specifies the source URL to get a
+file from, while the "normal" URL will be used as target URL, the file that
+will be written/created.
+
+Note that not all FTP server allow 3rd party transfers. (Added in 7.13.0)
+.IP "--3p-user"
+(FTP) Specify user:password for the source URL transfer. (Added in 7.13.0)
 .IP "-4/--ipv4"
 If libcurl is capable of resolving an address to multiple IP versions (which
 it is if it is ipv6-capable), this option tells libcurl to resolve names to

docs/examples/Makefile.am

@@ -10,7 +10,7 @@ EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit2.c		\
  post-callback.c multi-app.c multi-double.c multi-single.c		\
  multi-post.c fopen.c simplepost.c makefile.dj curlx.c https.c		\
  multi-debugcallback.c fileupload.c getinfo.c ftp3rdparty.c debug.c	\
- anyauthput.c
+ anyauthput.c htmltitle.cc htmltidy.c
 
 all:
 	@echo "done"

docs/examples/README

@@ -44,6 +44,8 @@ ftpgetresp.c   - get the response strings from the FTP server
 ftpupload.c    - upload a file to a FTP server
 getinfo.c      - get the Content-Type from the recent transfer
 getinmemory.c  - download a file to memory only
+htmltitle.cc   - download a HTML file and extract the <title> tag from a HTML
+                 page using libxml
 http-post.c    - HTTP POST
 httpput.c      - HTTP PUT a local file
 https.c        - simple HTTPS transfer

docs/examples/ftp3rdparty.c

@@ -1,8 +1,8 @@
 /*****************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
  * $Id$
@@ -16,22 +16,20 @@
 
 /*
  * This is an example showing how to transfer a file between two remote hosts.
+ * 7.13.0 or later required.
  */
 
-
-
 int main(void)
 {
   CURL *curl;
   CURLcode res;
-  char sourceFileName[] = "/tmp/file";
-  char targetFileName[] = "/tmp/curlTargetTest.dat";
-  char sourceHost[] = "source";
-  char targetHost[] = "target";
+  char source_url[] = "ftp://remotehost.com/path/to/source";
+  char target_url[] = "ftp://aotherserver.com/path/to/dest";
+
   char sourceUserPass[] = "user:pass";
   char targetUserPass[] = "user:pass";
   char url[100];
-  
+
   struct curl_slist *source_pre_cmd = NULL;
   struct curl_slist *target_pre_cmd = NULL;
   struct curl_slist *source_post_cmd = NULL;
@@ -39,24 +37,25 @@ int main(void)
   char cmd[] = "PWD";   /* just to test */
 
   curl_global_init(CURL_GLOBAL_DEFAULT);
-  
+
   curl = curl_easy_init();
   if (curl) {
-    sprintf(url, "ftp://%s@%s/%s", targetUserPass, targetHost, targetFileName);
-    printf("%s\n", url);
-    curl_easy_setopt(curl, CURLOPT_URL, url);
+    /* The ordinary URL is the target when speaking 3rd party transfers */
+    curl_easy_setopt(curl, CURLOPT_URL, target_url);
 
-    /* Set a proxy host */
-    curl_easy_setopt(curl, CURLOPT_SOURCE_HOST, sourceHost);
+    /* Set a source URL */
+    curl_easy_setopt(curl, CURLOPT_SOURCE_URL, source_url);
 
-    /* Set a proxy user and password */
+    /* Set target user and password */
+    curl_easy_setopt(curl, CURLOPT_USERPWD, targetUserPass);
+
+    /* Set source user and password */
     curl_easy_setopt(curl, CURLOPT_SOURCE_USERPWD, sourceUserPass);
 
-    /* Set a proxy full file name */
-    curl_easy_setopt(curl, CURLOPT_SOURCE_PATH, sourceFileName);
-
-    /* Set a proxy passive host */
-    curl_easy_setopt(curl, CURLOPT_PASV_HOST, 0);   /* optional */
+#if 0
+    /* FTPPORT enables PORT on the target side, instead of PASV. */
+    curl_easy_setopt(curl, CURLOPT_FTPPORT, "");   /* optional */
+#endif
 
     /* build a list of commands to pass to libcurl */
     source_pre_cmd = curl_slist_append(source_pre_cmd, cmd);
@@ -77,7 +76,7 @@ int main(void)
     target_post_cmd = curl_slist_append(target_post_cmd, cmd);
     /* Set a post-quote command */
     curl_easy_setopt(curl, CURLOPT_POSTQUOTE, target_post_cmd);
-    
+
     /* Switch on full protocol/debug output */
     curl_easy_setopt(curl, CURLOPT_VERBOSE, 1);
 

docs/examples/ftpupload.c

@@ -78,8 +78,12 @@ int main(int argc, char **argv)
        DLL may not use the variable's memory when passed in to it from an app
        like this. */
 
-    /* and give the size of the upload (optional) */
-    curl_easy_setopt(curl, CURLOPT_INFILESIZE_LARGE, file_info.st_size);
+    /* Set the size of the file to upload (optional).  If you give a *_LARGE
+       option you MUST make sure that the type of the passed-in argument is a
+       curl_off_t. If you use CURLOPT_INFILESIZE (without _LARGE) you must
+       make sure that to pass in a type 'long' argument. */
+    curl_easy_setopt(curl, CURLOPT_INFILESIZE_LARGE,
+                     (curl_off_t)file_info.st_size);
 
     /* Now run off and do what you've been told! */
     res = curl_easy_perform(curl);

docs/examples/getinmemory.c

@@ -37,7 +37,7 @@ void *myrealloc(void *ptr, size_t size)
 size_t
 WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
 {
-  register int realsize = size * nmemb;
+  size_t realsize = size * nmemb;
   struct MemoryStruct *mem = (struct MemoryStruct *)data;
 
   mem->memory = (char *)myrealloc(mem->memory, mem->size + realsize + 1);

docs/examples/htmltidy.c

@@ -0,0 +1,118 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * Download a document and use libtidy to parse the HTML.
+ * Written by Jeff Pohlmeyer
+ *
+ * LibTidy => http://tidy.sourceforge.net
+ *
+ * gcc -Wall -I/usr/local/include tidycurl.c -lcurl -ltidy -o tidycurl
+ *
+ */
+
+#include <stdio.h>
+#include <tidy/tidy.h>
+#include <tidy/buffio.h>
+#include <curl/curl.h>
+
+/* curl write callback, to fill tidy's input buffer...  */
+uint write_cb(char *in, uint size, uint nmemb, TidyBuffer *out)
+{
+  uint r;
+  r = size * nmemb;
+  tidyBufAppend( out, in, r );
+  return(r);
+}
+
+/* Traverse the document tree */
+void dumpNode(TidyDoc doc, TidyNode tnod, int indent )
+{
+  TidyNode child;
+  for ( child = tidyGetChild(tnod); child; child = tidyGetNext(child) )
+  {
+    ctmbstr name = tidyNodeGetName( child );
+    if ( name )
+    {
+      /* if it has a name, then it's an HTML tag ... */
+      TidyAttr attr;
+      printf( "%*.*s%s ", indent, indent, "<", name);
+      /* walk the attribute list */
+      for ( attr=tidyAttrFirst(child); attr; attr=tidyAttrNext(attr) ) {
+        printf(tidyAttrName(attr));
+        tidyAttrValue(attr)?printf("=\"%s\" ",
+                                   tidyAttrValue(attr)):printf(" ");
+      }
+      printf( ">\n");
+    }
+    else {
+      /* if it doesn't have a name, then it's probably text, cdata, etc... */
+      TidyBuffer buf;
+      tidyBufInit(&buf);
+      tidyNodeGetText(doc, child, &buf);
+      printf("%*.*s\n", indent, indent, buf.bp?(char *)buf.bp:"");
+      tidyBufFree(&buf);
+    }
+    dumpNode( doc, child, indent + 4 ); /* recursive */
+  }
+}
+
+
+int main(int argc, char **argv )
+{
+  CURL *curl;
+  char curl_errbuf[CURL_ERROR_SIZE];
+  TidyDoc tdoc;
+  TidyBuffer docbuf = {0};
+  TidyBuffer tidy_errbuf = {0};
+  int err;
+  if ( argc == 2) {
+    curl = curl_easy_init();
+    curl_easy_setopt(curl, CURLOPT_URL, argv[1]);
+    curl_easy_setopt(curl, CURLOPT_ERRORBUFFER, curl_errbuf);
+    curl_easy_setopt(curl, CURLOPT_NOPROGRESS, no);
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, yes);
+    curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, write_cb);
+
+    tdoc = tidyCreate();
+    tidyOptSetBool(tdoc, TidyForceOutput, yes); /* try harder */
+    tidyOptSetInt(tdoc, TidyWrapLen, 4096);
+    tidySetErrorBuffer( tdoc, &tidy_errbuf );
+    tidyBufInit(&docbuf);
+
+    curl_easy_setopt(curl, CURLOPT_WRITEDATA, &docbuf);
+    err=curl_easy_perform(curl);
+    if ( !err ) {
+      err = tidyParseBuffer(tdoc, &docbuf); /* parse the input */
+      if ( err >= 0 ) {
+        err = tidyCleanAndRepair(tdoc); /* fix any problems */
+        if ( err >= 0 ) {
+          err = tidyRunDiagnostics(tdoc); /* load tidy error buffer */
+          if ( err >= 0 ) {
+            dumpNode( tdoc, tidyGetRoot(tdoc), 0 ); /* walk the tree */
+            fprintf(stderr, "%s\n", tidy_errbuf.bp); /* show errors */
+          }
+        }
+      }
+    }
+    else
+      fprintf(stderr, "%s\n", curl_errbuf);
+
+    /* clean-up */
+    curl_easy_cleanup(curl);
+    tidyBufFree(&docbuf);
+    tidyBufFree(&tidy_errbuf);
+    tidyRelease(tdoc);
+    return(err);
+
+  }
+  else
+    printf( "usage: %s <url>\n", argv[0] );
+
+  return(0);
+}

docs/examples/htmltitle.cc

@@ -0,0 +1,301 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+// Get a web page, parse it with libxml.
+//
+// Written by Lars Nilsson
+//
+// GNU C++ compile command line suggestion (edit paths accordingly):
+//
+// g++ -Wall -I/opt/curl/include -I/opt/libxml/include/libxml2 htmltitle.cc \
+// -o htmltitle -L/opt/curl/lib -L/opt/libxml/lib -lcurl -lxml2
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <string>
+#include <curl/curl.h>
+#include <libxml/HTMLparser.h>
+
+//
+//  Case-insensitive string comparison
+//
+
+#ifdef _MSC_VER
+#define COMPARE(a, b) (!stricmp((a), (b)))
+#else
+#define COMPARE(a, b) (!strcasecmp((a), (b)))
+#endif
+
+//
+//  libxml callback context structure
+//
+
+struct Context
+{
+  Context(): addTitle(false) { }
+
+  bool addTitle;
+  std::string title;
+};
+
+//
+//  libcurl variables for error strings and returned data
+
+static char errorBuffer[CURL_ERROR_SIZE];
+static std::string buffer;
+
+//
+//  libcurl write callback function
+//
+
+static int writer(char *data, size_t size, size_t nmemb,
+                  std::string *writerData)
+{
+  if (writerData == NULL)
+    return 0;
+
+  writerData->append(data, size*nmemb);
+
+  return size * nmemb;
+}
+
+//
+//  libcurl connection initialization
+//
+
+static bool init(CURL *&conn, char *url)
+{
+  CURLcode code;
+
+  conn = curl_easy_init();
+
+  if (conn == NULL)
+  {
+    fprintf(stderr, "Failed to create CURL connection\n");
+
+    exit(EXIT_FAILURE);
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_ERRORBUFFER, errorBuffer);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set error buffer [%d]\n", code);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_URL, url);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set URL [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_FOLLOWLOCATION, 1);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set redirect option [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_WRITEFUNCTION, writer);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set writer [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_WRITEDATA, &buffer);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set write data [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  return true;
+}
+
+//
+//  libxml start element callback function
+//
+
+static void StartElement(void *voidContext,
+                         const xmlChar *name,
+                         const xmlChar **attributes)
+{
+  Context *context = (Context *)voidContext;
+
+  if (COMPARE((char *)name, "TITLE"))
+  {
+    context->title = "";
+    context->addTitle = true;
+  }
+}
+
+//
+//  libxml end element callback function
+//
+
+static void EndElement(void *voidContext,
+                       const xmlChar *name)
+{
+  Context *context = (Context *)voidContext;
+
+  if (COMPARE((char *)name, "TITLE"))
+    context->addTitle = false;
+}
+
+//
+//  Text handling helper function
+//
+
+static void handleCharacters(Context *context,
+                             const xmlChar *chars,
+                             int length)
+{
+  if (context->addTitle)
+    context->title.append((char *)chars, length);
+}
+
+//
+//  libxml PCDATA callback function
+//
+
+static void Characters(void *voidContext,
+                       const xmlChar *chars,
+                       int length)
+{
+  Context *context = (Context *)voidContext;
+
+  handleCharacters(context, chars, length);
+}
+
+//
+//  libxml CDATA callback function
+//
+
+static void cdata(void *voidContext,
+                  const xmlChar *chars,
+                  int length)
+{
+  Context *context = (Context *)voidContext;
+
+  handleCharacters(context, chars, length);
+}
+
+//
+//  libxml SAX callback structure
+//
+
+static htmlSAXHandler saxHandler =
+{
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  StartElement,
+  EndElement,
+  NULL,
+  Characters,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  cdata,
+  NULL
+};
+
+//
+//  Parse given (assumed to be) HTML text and return the title
+//
+
+static void parseHtml(const std::string &html,
+                      std::string &title)
+{
+  htmlParserCtxtPtr ctxt;
+  Context context;
+
+  ctxt = htmlCreatePushParserCtxt(&saxHandler, &context, "", 0, "",
+                                  XML_CHAR_ENCODING_NONE);
+
+  htmlParseChunk(ctxt, html.c_str(), html.size(), 0);
+  htmlParseChunk(ctxt, "", 0, 1);
+
+  htmlFreeParserCtxt(ctxt);
+
+  title = context.title;
+}
+
+int main(int argc, char *argv[])
+{
+  CURL *conn = NULL;
+  CURLcode code;
+  std::string title;
+
+  // Ensure one argument is given
+
+  if (argc != 2)
+  {
+    fprintf(stderr, "Usage: %s <url>\n", argv[0]);
+
+    exit(EXIT_FAILURE);
+  }
+
+  curl_global_init(CURL_GLOBAL_DEFAULT);
+
+  // Initialize CURL connection
+
+  if (!init(conn, argv[1]))
+  {
+    fprintf(stderr, "Connection initializion failed\n");
+
+    exit(EXIT_FAILURE);
+  }
+
+  // Retrieve content for the URL
+
+  code = curl_easy_perform(conn);
+  curl_easy_cleanup(conn);
+
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to get '%s' [%s]\n", argv[1], errorBuffer);
+
+    exit(EXIT_FAILURE);
+  }
+
+  // Parse the (assumed) HTML code
+
+  parseHtml(buffer, title);
+
+  // Display the extracted title
+
+  printf("Title: %s\n", title.c_str());
+
+  return EXIT_SUCCESS;
+}

docs/examples/httpput.c

@@ -19,6 +19,9 @@
  * line argument to the URL also given on the command line.
  *
  * This example also uses its own read callback.
+ *
+ * Here's an article on how to setup a PUT handler for Apache:
+ * http://www.apacheweek.com/features/put
  */
 
 size_t read_callback(void *ptr, size_t size, size_t nmemb, void *stream)

docs/libcurl/Makefile.am

@@ -52,7 +52,7 @@ PDFPAGES = curl_easy_cleanup.pdf curl_easy_getinfo.pdf			\
 
 CLEANFILES = $(HTMLPAGES) $(PDFPAGES)
 
-EXTRA_DIST = $(man_MANS) $(HTMLPAGES) index.html $(PDFPAGES)
+EXTRA_DIST = $(man_MANS) $(HTMLPAGES) index.html $(PDFPAGES) libcurl.m4
 
 MAN2HTML= roffit --mandir=. < $< >$@
 

docs/libcurl/curl_easy_getinfo.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_easy_getinfo 3 "14 Dec 2004" "libcurl 7.12.3" "libcurl Manual"
+.TH curl_easy_getinfo 3 "22 Dec 2004" "libcurl 7.12.3" "libcurl Manual"
 .SH NAME
 curl_easy_getinfo - extract information from a curl handle
 .SH SYNOPSIS
@@ -27,7 +27,13 @@ The following information can be extracted:
 Pass a pointer to a 'char *' to receive the last used effective URL.
 .IP CURLINFO_RESPONSE_CODE
 Pass a pointer to a long to receive the last received HTTP or FTP code. This
-option was known as CURLINFO_HTTP_CODE in libcurl 7.10.7 and earlier.
+option was known as CURLINFO_HTTP_CODE in libcurl 7.10.7 and earlier. This
+will be zero if no server response code has been received. Note that a proxy's
+CONNECT response should be read with \fICURLINFO_HTTP_CONNECTCODE\fP and not
+this.
+.IP CURLINFO_HTTP_CONNECTCODE
+Pass a pointer to a long to receive the last received proxy response code to a
+CONNECT request.
 .IP CURLINFO_FILETIME
 Pass a pointer to a long to receive the remote time of the retrieved
 document. If you get -1, it can be because of many reasons (unknown, the

docs/libcurl/curl_easy_setopt.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl_easy_setopt 3 "29 Nov 2004" "libcurl 7.12.3" "libcurl Manual"
+.TH curl_easy_setopt 3 "25 Jan 2005" "libcurl 7.13.0" "libcurl Manual"
 .SH NAME
 curl_easy_setopt - set options for a curl easy handle
 .SH SYNOPSIS
@@ -543,11 +543,10 @@ data to figure out the size. This is the large file version of the
 .IP CURLOPT_HTTPPOST
 Tells libcurl you want a multipart/formdata HTTP POST to be made and you
 instruct what data to pass on to the server.  Pass a pointer to a linked list
-of HTTP post structs as parameter.  The linked list should be a fully valid
-list of 'struct HttpPost' structs properly filled in. The best and most
-elegant way to do this, is to use \fIcurl_formadd(3)\fP as documented. The
-data in this list must remain intact until you close this curl handle again
-with \fIcurl_easy_cleanup(3)\fP.
+of curl_httppost structs as parameter. . The easiest way to create such a
+list, is to use \fIcurl_formadd(3)\fP as documented. The data in this list
+must remain intact until you close this curl handle again with
+\fIcurl_easy_cleanup(3)\fP.
 
 Using POST with HTTP 1.1 implies the use of a "Expect: 100-continue" header.
 You can disable this header with \fICURLOPT_HTTPHEADER\fP as usual.
@@ -618,9 +617,9 @@ name of your file holding cookie data to read. The cookie data may be in
 Netscape / Mozilla cookie data format or just regular HTTP-style headers
 dumped to a file.
 
-Given an empty or non-existing file, this option will enable cookies for this
-curl handle, making it understand and parse received cookies and then use
-matching cookies in future request.
+Given an empty or non-existing file or by passing the empty string (""), this
+option will enable cookies for this curl handle, making it understand and
+parse received cookies and then use matching cookies in future request.
 .IP CURLOPT_COOKIEJAR
 Pass a file name as char *, zero terminated. This will make libcurl write all
 internally known cookies to the specified file when \fIcurl_easy_cleanup(3)\fP
@@ -752,6 +751,22 @@ Try "AUTH SSL" first, and only if that fails try "AUTH TLS"
 .IP CURLFTPAUTH_TLS
 Try "AUTH TLS" first, and only if that fails try "AUTH SSL"
 .RE
+.IP CURLOPT_SOURCE_URL
+When set, it enables a FTP third party transfer, using the set URL as source,
+while \fICURLOPT_URL\fP is the target.
+.IP CURLOPT_SOURCE_USERPWD
+Set "username:password" to use for the source connection when doing FTP third
+party transfers.
+.IP CURLOPT_SOURCE_QUOTE
+Exactly like \fICURLOPT_QUOTE\fP, but for the source host.
+.IP CURLOPT_SOURCE_PREQUOTE
+Exactly like \fICURLOPT_PREQUOTE\fP, but for the source host.
+.IP CURLOPT_SOURCE_POSTQUOTE
+Exactly like \fICURLOPT_POSTQUOTE\fP, but for the source host.
+.IP CURLOPT_FTP_ACCOUNT
+Pass a pointer to a zero-terminated string (or NULL to disable). When an FTP
+server asks for "account data" after user name and password has been provided,
+this data is sent off using the ACCT command. (Added in 7.13.0)
 .SH PROTOCOL OPTIONS
 .IP CURLOPT_TRANSFERTEXT
 A non-zero parameter tells the library to use ASCII mode for ftp transfers,

docs/libcurl/curl_getdate.3

@@ -41,9 +41,9 @@ general you should instead use the specific relative time compared to
 UTC. Supported formats include: -1200, MST, +0100.
 .TP
 .B day of the week items
-Specifies a day of the week. Days of the week may be spelled out in full:
-`Sunday', `Monday', etc or they may be abbreviated to their first three
-letters. This is usually not info that adds anything.
+Specifies a day of the week. Days of the week may be spelled out in full
+(using english): `Sunday', `Monday', etc or they may be abbreviated to their
+first three letters. This is usually not info that adds anything.
 .TP
 .B pure numbers
 If a decimal number of the form YYYYMMDD appears, then YYYY is read as the
@@ -85,7 +85,12 @@ This function returns -1 when it fails to parse the date string. Otherwise it
 returns the number of seconds as described.
 
 If the year is larger than 2037 on systems with 32 bit time_t, this function
-will return 0x7fffffff (since that is the largest possible 31 bit number).
+will return 0x7fffffff (since that is the largest possible signed 32 bit
+number).
+
+Having a 64 bit time_t is not a guarantee that dates beyond 03:14:07 UTC,
+January 19, 2038 will work fine. On systems with a 64 bit time_t but with a
+crippled mktime(), \fIcurl_getdate\fP will return -1 in this case.
 .SH REWRITE
 The former version of this function was built with yacc and was not only very
 large, it was also never quite understood and it wasn't possible to build with

docs/libcurl/curl_multi_fdset.3

@@ -16,13 +16,9 @@ CURLMcode curl_multi_fdset(CURLM *multi_handle,
 .SH DESCRIPTION
 This function extracts file descriptor information from a given multi_handle.
 libcurl returns its fd_set sets. The application can use these to select()
-on. The \fIcurl_multi_perform(3)\fI function should be called as soon as one
+on. The \fIcurl_multi_perform(3)\fP function should be called as soon as one
 of them are ready to be read from or written to.
 
-NOTE that once this call is made, you must not remove the sets you point to,
-as libcurl will need to be able to read them. It needs them after select()
-calls, to know if certain sockets are readable or writable.
-
 You should also be aware that when doing select(), you should consider using a
 rather small (single-digit number of seconds) timeout and call
 \fIcurl_multi_perform\fP regularly - even if no activity has been seen on the

docs/libcurl/curl_version_info.3

@@ -1,8 +1,6 @@
-.\" You can view this file with:
-.\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_version_info 3 "11 May 2004" "libcurl 7.12" "libcurl Manual"
+.TH curl_version_info 3 "11 Mar 2005" "libcurl 7.13.2" "libcurl Manual"
 .SH NAME
 curl_version_info - returns run-time libcurl version info
 .SH SYNOPSIS
@@ -73,9 +71,9 @@ supports IPv6
 .IP CURL_VERSION_KERBEROS4
 supports kerberos4 (when using FTP)
 .IP CURL_VERSION_SSL
-supports SSL (HTTPS/FTPS)
+supports SSL (HTTPS/FTPS) (Added in 7.10)
 .IP CURL_VERSION_LIBZ
-supports HTTP deflate using libz
+supports HTTP deflate using libz (Added in 7.10)
 .IP CURL_VERSION_NTLM
 supports HTTP NTLM (added in 7.10.6)
 .IP CURL_VERSION_GSSNEGOTIATE
@@ -91,10 +89,15 @@ interface. (added in 7.10.7)
 libcurl was built with support for SPNEGO authentication (Simple and Protected
 GSS-API Negotiation Mechanism, defined in RFC 2478.) (added in 7.10.8)
 .IP CURL_VERSION_LARGEFILE
-libcurl was built with support for large files.
+libcurl was built with support for large files. (Added in 7.11.1)
 .IP CURL_VERSION_IDN
 libcurl was built with support for IDNA, domain names with international
-letters.
+letters. (Added in 7.12.0)
+.IP CURL_VERSION_SSPI
+libcurl was built with support for SSPI. This is only available on Windows and
+makes libcurl use Windows-provided functions for NTLM authentication. It also
+allows libcurl to use the current user and the current user's password without
+the app having to pass them on. (Added in 7.13.2)
 .RE
 \fIssl_version\fP is an ascii string for the OpenSSL version used. If libcurl
 has no SSL support, this is NULL.

docs/libcurl/libcurl-errors.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH libcurl-errors 3 "27 Apr 2004" "libcurl 7.12" "libcurl errors"
+.TH libcurl-errors 3 "9 Feb 2005" "libcurl 7.13.1" "libcurl errors"
 .SH NAME
 libcurl-errors \- error codes in libcurl
 .SH DESCRIPTION
@@ -187,6 +187,13 @@ Invalid LDAP URL
 Maximum file size exceeded
 .IP "CURLE_FTP_SSL_FAILED (64)"
 Requested FTP SSL level failed
+.IP "CURLE_SEND_FAIL_REWIND (65)"
+When doing a send operation curl had to rewind the data to retransmit, but the
+rewinding operation failed
+.IP "CURLE_SSL_ENGINE_INITFAILED (66)"
+Initiating the SSL Engine failed
+.IP "CURLE_LOGIN_DENIED (67)"
+The remote server denied curl to login (Added in 7.13.1)
 .SH "CURLMcode"
 This is the generic return code used by functions in the libcurl multi
 interface. Also consider \fIcurl_multi_strerror(3)\fI.

docs/libcurl/libcurl-tutorial.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH libcurl-tutorial 3 "18 Jun 2004" "libcurl" "libcurl programming"
+.TH libcurl-tutorial 3 "25 Jan 2005" "libcurl" "libcurl programming"
 .SH NAME
 libcurl-tutorial \- libcurl programming tutorial
 .SH "Objective"
@@ -76,6 +76,11 @@ possibly together with a few other features that can be on and off on
 different libcurls.
 
 See also the "Features libcurl Provides" further down.
+.IP "autoconf macro"
+When you write your configure script to detect libcurl and setup variables
+accordingly, we offer a prewritten macro that probably does everything you
+need in this area. See docs/libcurl/libcurl.m4 file - it includes docs on how
+to use it.
 
 .SH "Portable Code in a Portable World"
 The people behind libcurl have put a considerable effort to make libcurl work
@@ -94,9 +99,9 @@ use the library. Once for your program's entire life time. This is done using
  curl_global_init()
 
 and it takes one parameter which is a bit pattern that tells libcurl what to
-initialize. Using CURL_GLOBAL_ALL will make it initialize all known internal
-sub modules, and might be a good default option. The current two bits that
-are specified are:
+initialize. Using \fICURL_GLOBAL_ALL\fP will make it initialize all known
+internal sub modules, and might be a good default option. The current two bits
+that are specified are:
 .RS
 .IP "CURL_GLOBAL_WIN32"
 which only does anything on Windows machines. When used on
@@ -113,17 +118,19 @@ application so if your program or another library already does this, this
 bit should not be needed.
 .RE
 
-libcurl has a default protection mechanism that detects if curl_global_init()
-hasn't been called by the time curl_easy_perform() is called and if that is
-the case, libcurl runs the function itself with a guessed bit pattern. Please
-note that depending solely on this is not considered nice nor very good.
+libcurl has a default protection mechanism that detects if
+\fIcurl_global_init(3)\fP hasn't been called by the time
+\fIcurl_easy_perform(3)\fP is called and if that is the case, libcurl runs the
+function itself with a guessed bit pattern. Please note that depending solely
+on this is not considered nice nor very good.
 
-When the program no longer uses libcurl, it should call curl_global_cleanup(),
-which is the opposite of the init call. It will then do the reversed
-operations to cleanup the resources the curl_global_init() call initialized.
+When the program no longer uses libcurl, it should call
+\fIcurl_global_cleanup(3)\fP, which is the opposite of the init call. It will
+then do the reversed operations to cleanup the resources the
+\fIcurl_global_init(3)\fP call initialized.
 
-Repeated calls to curl_global_init() and curl_global_cleanup() should be
-avoided. They should only be called once each.
+Repeated calls to \fIcurl_global_init(3)\fP and \fIcurl_global_cleanup(3)\fP
+should be avoided. They should only be called once each.
 
 .SH "Features libcurl Provides"
 It is considered best-practice to determine libcurl features run-time rather
@@ -153,17 +160,18 @@ It returns an easy handle. Using that you proceed to the next step: setting
 up your preferred actions. A handle is just a logic entity for the upcoming
 transfer or series of transfers.
 
-You set properties and options for this handle using curl_easy_setopt(). They
-control how the subsequent transfer or transfers will be made. Options remain
-set in the handle until set again to something different. Alas, multiple
-requests using the same handle will use the same options.
+You set properties and options for this handle using
+\fIcurl_easy_setopt(3)\fP. They control how the subsequent transfer or
+transfers will be made. Options remain set in the handle until set again to
+something different. Alas, multiple requests using the same handle will use
+the same options.
 
 Many of the options you set in libcurl are "strings", pointers to data
 terminated with a zero byte. Keep in mind that when you set strings with
-curl_easy_setopt(), libcurl will not copy the data. It will merely point to
-the data. You MUST make sure that the data remains available for libcurl to
-use until finished or until you use the same option again to point to
-something else.
+\fIcurl_easy_setopt(3)\fP, libcurl will not copy the data. It will merely
+point to the data. You MUST make sure that the data remains available for
+libcurl to use until finished or until you use the same option again to point
+to something else.
 
 One of the most basic properties to set in the handle is the URL. You set
 your preferred URL to transfer with CURLOPT_URL in a manner similar to:
@@ -188,41 +196,44 @@ similar to this:
 You can control what data your function get in the forth argument by setting
 another property:
 
-    curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct);
+ curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct);
 
 Using that property, you can easily pass local data between your application
 and the function that gets invoked by libcurl. libcurl itself won't touch the
-data you pass with CURLOPT_WRITEDATA.
+data you pass with \fICURLOPT_WRITEDATA\fP.
 
 libcurl offers its own default internal callback that'll take care of the data
-if you don't set the callback with CURLOPT_WRITEFUNCTION. It will then simply
-output the received data to stdout. You can have the default callback write
-the data to a different file handle by passing a 'FILE *' to a file opened for
-writing with the CURLOPT_WRITEDATA option.
+if you don't set the callback with \fICURLOPT_WRITEFUNCTION\fP. It will then
+simply output the received data to stdout. You can have the default callback
+write the data to a different file handle by passing a 'FILE *' to a file
+opened for writing with the \fICURLOPT_WRITEDATA\fP option.
 
 Now, we need to take a step back and have a deep breath. Here's one of those
 rare platform-dependent nitpicks. Did you spot it? On some platforms[2],
 libcurl won't be able to operate on files opened by the program. Thus, if you
-use the default callback and pass in a an open file with CURLOPT_WRITEDATA, it
-will crash. You should therefore avoid this to make your program run fine
-virtually everywhere.
+use the default callback and pass in a an open file with
+\fICURLOPT_WRITEDATA\fP, it will crash. You should therefore avoid this to
+make your program run fine virtually everywhere.
 
-(CURLOPT_WRITEDATA was formerly known as CURLOPT_FILE. Both names still work
-and do the same thing).
+(\fICURLOPT_WRITEDATA\fP was formerly known as \fICURLOPT_FILE\fP. Both names
+still work and do the same thing).
+
+If you're using libcurl as a win32 DLL, you MUST use the
+\fICURLOPT_WRITEFUNCTION\fP if you set \fICURLOPT_WRITEDATA\fP - or you will
+experience crashes.
 
 There are of course many more options you can set, and we'll get back to a few
 of them later. Let's instead continue to the actual transfer:
 
  success = curl_easy_perform(easyhandle);
 
-The \fIcurl_easy_perform(3)\fP will connect to the remote site, do the
-necessary commands and receive the transfer. Whenever it receives data, it
-calls the callback function we previously set. The function may get one byte
-at a time, or it may get many kilobytes at once. libcurl delivers as much as
-possible as often as possible. Your callback function should return the number
-of bytes it "took care of". If that is not the exact same amount of bytes that
-was passed to it, libcurl will abort the operation and return with an error
-code.
+\fIcurl_easy_perform(3)\fP will connect to the remote site, do the necessary
+commands and receive the transfer. Whenever it receives data, it calls the
+callback function we previously set. The function may get one byte at a time,
+or it may get many kilobytes at once. libcurl delivers as much as possible as
+often as possible. Your callback function should return the number of bytes it
+\&"took care of". If that is not the exact same amount of bytes that was
+passed to it, libcurl will abort the operation and return with an error code.
 
 When the transfer is complete, the function returns a return code that informs
 you if it succeeded in its mission or not. If a return code isn't enough for
@@ -236,12 +247,12 @@ previous
 
 .SH "Multi-threading Issues"
 libcurl is completely thread safe, except for two issues: signals and alarm
-handlers. Signals are needed for a SIGPIPE handler, and the alarm() Bacall
-is used to catch timeouts (mostly during ENS lookup).
+handlers. Signals are needed for a SIGPIPE handler, and the alarm() call is
+used to deal with timeouts (during DNS lookup).
 
 If you are accessing HTTPS or FTPS URLs in a multi-threaded manner, you are
 then of course using OpenSSL multi-threaded and it has itself a few
-requirements on this. Basilio, you need to provide one or two functions to
+requirements on this. Basically, you need to provide one or two functions to
 allow it to function properly. For all details, see this:
 
  http://www.openssl.org/docs/crypto/threads.html#DESCRIPTION
@@ -322,12 +333,12 @@ CURLOPT_INFILESIZE_LARGE for all known file sizes like this[1]:
  curl_easy_setopt(easyhandle, CURLOPT_INFILESIZE_LARGE, file_size);
 .fi
 
-When you call curl_easy_perform() this time, it'll perform all the necessary
-operations and when it has invoked the upload it'll call your supplied
-callback to get the data to upload. The program should return as much data as
-possible in every invoke, as that is likely to make the upload perform as
-fast as possible. The callback should return the number of bytes it wrote in
-the buffer. Returning 0 will signal the end of the upload.
+When you call \fIcurl_easy_perform(3)\fP this time, it'll perform all the
+necessary operations and when it has invoked the upload it'll call your
+supplied callback to get the data to upload. The program should return as much
+data as possible in every invoke, as that is likely to make the upload perform
+as fast as possible. The callback should return the number of bytes it wrote
+in the buffer. Returning 0 will signal the end of the upload.
 
 .SH "Passwords"
 Many protocols use or even require that user name and password are provided
@@ -466,15 +477,14 @@ then passing that list to libcurl.
 
 While the simple examples above cover the majority of all cases where HTTP
 POST operations are required, they don't do multi-part formposts. Multi-part
-formposts were introduced as a better way to post (possibly large) binary
-data and was first documented in the RFC1867. They're called multi-part
-because they're built by a chain of parts, each being a single unit. Each
-part has its own name and contents. You can in fact create and post a
-multi-part formpost with the regular libcurl POST support described above, but
-that would require that you build a formpost yourself and provide to
-libcurl. To make that easier, libcurl provides curl_formadd(). Using this
-function, you add parts to the form. When you're done adding parts, you post
-the whole form.
+formposts were introduced as a better way to post (possibly large) binary data
+and was first documented in the RFC1867. They're called multi-part because
+they're built by a chain of parts, each being a single unit. Each part has its
+own name and contents. You can in fact create and post a multi-part formpost
+with the regular libcurl POST support described above, but that would require
+that you build a formpost yourself and provide to libcurl. To make that
+easier, libcurl provides \fIcurl_formadd(3)\fP. Using this function, you add
+parts to the form. When you're done adding parts, you post the whole form.
 
 The following example sets two simple text parts with plain textual contents,
 and then a file with binary contents and upload the whole thing.
@@ -527,10 +537,10 @@ post handle:
 .fi
 
 Since all options on an easyhandle are "sticky", they remain the same until
-changed even if you do call curl_easy_perform(), you may need to tell curl to
-go back to a plain GET request if you intend to do such a one as your next
-request. You force an easyhandle to back to GET by using the CURLOPT_HTTPGET
-option:
+changed even if you do call \fIcurl_easy_perform(3)\fP, you may need to tell
+curl to go back to a plain GET request if you intend to do such a one as your
+next request. You force an easyhandle to back to GET by using the
+CURLOPT_HTTPGET option:
 
  curl_easy_setopt(easyhandle, CURLOPT_HTTPGET, TRUE);
 
@@ -719,7 +729,7 @@ Mozilla javascript engine in the past.
 Re-cycling the same easy handle several times when doing multiple requests is
 the way to go.
 
-After each single curl_easy_perform() operation, libcurl will keep the
+After each single \fIcurl_easy_perform(3)\fP operation, libcurl will keep the
 connection alive and open. A subsequent request using the same easy handle to
 the same host might just be able to use the already open connection! This
 reduces network impact a lot.
@@ -903,8 +913,8 @@ A little example that deletes a given file before an operation:
 .fi
 
 If you would instead want this operation (or chain of operations) to happen
-_after_ the data transfer took place the option to curl_easy_setopt() would
-instead be called CURLOPT_POSTQUOTE and used the exact same way.
+_after_ the data transfer took place the option to \fIcurl_easy_setopt(3)\fP
+would instead be called CURLOPT_POSTQUOTE and used the exact same way.
 
 The custom FTP command will be issued to the server in the same order they are
 added to the list, and if a command gets an error code returned back from the
@@ -973,9 +983,9 @@ The perhaps most advanced cookie operation libcurl offers, is saving the
 entire internal cookie state back into a Netscape/Mozilla formatted cookie
 file. We call that the cookie-jar. When you set a file name with
 CURLOPT_COOKIEJAR, that file name will be created and all received cookies
-will be stored in it when curl_easy_cleanup() is called. This enabled cookies
-to get passed on properly between multiple handles without any information
-getting lost.
+will be stored in it when \fIcurl_easy_cleanup(3)\fP is called. This enabled
+cookies to get passed on properly between multiple handles without any
+information getting lost.
 
 .SH "FTP Peculiarities We Need"
 
@@ -1103,46 +1113,47 @@ of how to use the easy interface. The multi interface is simply a way to make
 multiple transfers at the same time, by adding up multiple easy handles in to
 a "multi stack".
 
-You create the easy handles you want and you set all the options just like
-you have been told above, and then you create a multi handle with
-curl_multi_init() and add all those easy handles to that multi handle with
-curl_multi_add_handle().
+You create the easy handles you want and you set all the options just like you
+have been told above, and then you create a multi handle with
+\fIcurl_multi_init(3)\fP and add all those easy handles to that multi handle
+with \fIcurl_multi_add_handle(3)\fP.
 
 When you've added the handles you have for the moment (you can still add new
-ones at any time), you start the transfers by call curl_multi_perform().
+ones at any time), you start the transfers by call
+\fIcurl_multi_perform(3)\fP.
 
-curl_multi_perform() is asynchronous. It will only execute as little as
-possible and then return back control to your program. It is designed to
-never block. If it returns CURLM_CALL_MULTI_PERFORM you better call it again
-soon, as that is a signal that it still has local data to send or remote data
-to receive.
+\fIcurl_multi_perform(3)\fP is asynchronous. It will only execute as little as
+possible and then return back control to your program. It is designed to never
+block. If it returns CURLM_CALL_MULTI_PERFORM you better call it again soon,
+as that is a signal that it still has local data to send or remote data to
+receive.
 
 The best usage of this interface is when you do a select() on all possible
 file descriptors or sockets to know when to call libcurl again. This also
-makes it easy for you to wait and respond to actions on your own
-application's sockets/handles. You figure out what to select() for by using
-curl_multi_fdset(), that fills in a set of fd_set variables for you with the
-particular file descriptors libcurl uses for the moment.
+makes it easy for you to wait and respond to actions on your own application's
+sockets/handles. You figure out what to select() for by using
+\fIcurl_multi_fdset(3)\fP, that fills in a set of fd_set variables for you
+with the particular file descriptors libcurl uses for the moment.
 
 When you then call select(), it'll return when one of the file handles signal
-action and you then call curl_multi_perform() to allow libcurl to do what it
-wants to do. Take note that libcurl does also feature some time-out code so
-we advice you to never use very long timeouts on select() before you call
-curl_multi_perform(), which thus should be called unconditionally every now
-and then even if none of its file descriptors have signaled ready. Another
-precaution you should use: always call curl_multi_fdset() immediately before
-the select() call since the current set of file descriptors may change when
-calling a curl function.
+action and you then call \fIcurl_multi_perform(3)\fP to allow libcurl to do
+what it wants to do. Take note that libcurl does also feature some time-out
+code so we advice you to never use very long timeouts on select() before you
+call \fIcurl_multi_perform(3)\fP, which thus should be called unconditionally
+every now and then even if none of its file descriptors have signaled
+ready. Another precaution you should use: always call
+\fIcurl_multi_fdset(3)\fP immediately before the select() call since the
+current set of file descriptors may change when calling a curl function.
 
 If you want to stop the transfer of one of the easy handles in the stack, you
-can use curl_multi_remove_handle() to remove individual easy
-handles. Remember that easy handles should be curl_easy_cleanup()ed.
+can use \fIcurl_multi_remove_handle(3)\fP to remove individual easy
+handles. Remember that easy handles should be \fIcurl_easy_cleanup(3)\fPed.
 
 When a transfer within the multi stack has finished, the counter of running
-transfers (as filled in by curl_multi_perform()) will decrease. When the
-number reaches zero, all transfers are done.
+transfers (as filled in by \fIcurl_multi_perform(3)\fP) will decrease. When
+the number reaches zero, all transfers are done.
 
-curl_multi_info_read() can be used to get information about completed
+\fIcurl_multi_info_read(3)\fP can be used to get information about completed
 transfers. It then returns the CURLcode for each easy transfer, to allow you
 to figure out success on each individual transfer.
 

docs/libcurl/libcurl.m4

@@ -0,0 +1,209 @@
+# LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION],
+#                       [ACTION-IF-YES], [ACTION-IF-NO])
+# ----------------------------------------------------------
+#      David Shaw <dshaw@jabberwocky.com>   Jan-23-2005
+#
+# Checks for libcurl.  DEFAULT-ACTION is the string yes or no to
+# specify whether to default to --with-libcurl or --without-libcurl.
+# If not supplied, DEFAULT-ACTION is yes.  MINIMUM-VERSION is the
+# minimum version of libcurl to accept.  Pass the version as a regular
+# version number like 7.10.1. If not supplied, any version is
+# accepted.  ACTION-IF-YES is a list of shell commands to run if
+# libcurl was successfully found and passed the various tests.
+# ACTION-IF-NO is a list of shell commands that are run otherwise.
+# Note that using --without-libcurl does run ACTION-IF-NO.
+#
+# This macro defines HAVE_LIBCURL if a working libcurl setup is found,
+# and sets @LIBCURL@ and @LIBCURL_CPPFLAGS@ to the necessary values.
+# Other useful defines are LIBCURL_FEATURE_xxx where xxx are the
+# various features supported by libcurl, and LIBCURL_PROTOCOL_yyy
+# where yyy are the various protocols supported by libcurl.  Both xxx
+# and yyy are capitalized.  See the list of AH_TEMPLATEs at the top of
+# the macro for the complete list of possible defines.  Shell
+# variables $libcurl_feature_xxx and $libcurl_protocol_yyy are also
+# defined to 'yes' for those features and protocols that were found.
+# Note that xxx and yyy keep the same capitalization as in the
+# curl-config list (e.g. it's "HTTP" and not "http").
+#
+# Users may override the detected values by doing something like:
+# LIBCURL="-lcurl" LIBCURL_CPPFLAGS="-I/usr/myinclude" ./configure
+#
+# For the sake of sanity, this macro assumes that any libcurl that is
+# found is after version 7.7.2, the first version that included the
+# curl-config script.  Note that it is very important for people
+# packaging binary versions of libcurl to include this script!
+# Without curl-config, we can only make educated guesses as to what
+# protocols are available.  Specifically, we assume that all of HTTP,
+# FTP, GOPHER, FILE, TELNET, LDAP, and DICT exist, and (if SSL exists)
+# HTTPS is present.  All of these protocols existed when libcurl was
+# first created in version 7, so this is a safe assumption.  If the
+# version is 7.11.0 or later, FTPS is assumed to be present as well.
+# FTPS existed before then, but was not yet fully standards compliant.
+
+AC_DEFUN([LIBCURL_CHECK_CONFIG],
+[
+  AH_TEMPLATE([LIBCURL_FEATURE_SSL],[Defined if libcurl supports SSL])
+  AH_TEMPLATE([LIBCURL_FEATURE_KRB4],[Defined if libcurl supports KRB4])
+  AH_TEMPLATE([LIBCURL_FEATURE_IPV6],[Defined if libcurl supports IPv6])
+  AH_TEMPLATE([LIBCURL_FEATURE_LIBZ],[Defined if libcurl supports libz])
+  AH_TEMPLATE([LIBCURL_FEATURE_ASYNCHDNS],[Defined if libcurl supports AsynchDNS])
+
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTP],[Defined if libcurl supports HTTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTPS],[Defined if libcurl supports HTTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTP],[Defined if libcurl supports FTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTPS],[Defined if libcurl supports FTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_GOPHER],[Defined if libcurl supports GOPHER])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FILE],[Defined if libcurl supports FILE])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_TELNET],[Defined if libcurl supports TELNET])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT])
+
+  AC_ARG_WITH(libcurl,
+     AC_HELP_STRING([--with-libcurl=DIR],[look for the curl library in DIR]),
+     [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])])
+
+  if test "$_libcurl_with" != "no" ; then
+
+     AC_PROG_AWK
+
+     _libcurl_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'"
+
+     _libcurl_try_link=yes
+
+     if test -d "$_libcurl_with" ; then
+        CPPFLAGS="${CPPFLAGS} -I$withval/include"
+        LDFLAGS="${LDFLAGS} -L$withval/lib"
+     fi
+
+     AC_PATH_PROG([_libcurl_config],[curl-config])
+
+     if test x$_libcurl_config != "x" ; then
+        AC_CACHE_CHECK([for the version of libcurl],
+	   [libcurl_cv_lib_curl_version],
+           [libcurl_cv_lib_curl_version=`$_libcurl_config --version | $AWK '{print $[]2}'`])
+
+	_libcurl_version=`echo $libcurl_cv_lib_curl_version | $_libcurl_version_parse`
+	_libcurl_wanted=`echo ifelse([$2],,[0],[$2]) | $_libcurl_version_parse`
+
+        if test $_libcurl_wanted -gt 0 ; then
+	   AC_CACHE_CHECK([for libcurl >= version $2],
+	      [libcurl_cv_lib_version_ok],
+              [
+   	      if test $_libcurl_version -ge $_libcurl_wanted ; then
+	         libcurl_cv_lib_version_ok=yes
+      	      else
+	         libcurl_cv_lib_version_ok=no
+  	      fi
+              ])
+        fi
+
+	if test $_libcurl_wanted -eq 0 || test x$libcurl_cv_lib_version_ok = xyes ; then
+           if test x"$LIBCURL_CPPFLAGS" = "x" ; then
+              LIBCURL_CPPFLAGS=`$_libcurl_config --cflags`
+           fi
+           if test x"$LIBCURL" = "x" ; then
+              LIBCURL=`$_libcurl_config --libs`
+           fi
+
+	   # All curl-config scripts support --feature
+	   _libcurl_features=`$_libcurl_config --feature`
+
+           # Is it modern enough to have --protocols? (7.12.4)
+	   if test $_libcurl_version -ge 461828 ; then
+              _libcurl_protocols=`$_libcurl_config --protocols`
+           fi
+	else
+           _libcurl_try_link=no
+	fi
+
+	unset _libcurl_wanted
+     fi
+
+     if test $_libcurl_try_link = yes ; then
+
+        # we didn't find curl-config, so let's see if the user-supplied
+        # link line (or failing that, "-lcurl") is enough.
+        LIBCURL=${LIBCURL-"-lcurl"}
+
+        AC_CACHE_CHECK([whether libcurl is usable],
+           [libcurl_cv_lib_curl_usable],
+           [
+           _libcurl_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS"
+           _libcurl_save_ldflags=$LDFLAGS
+           LDFLAGS="$LDFLAGS $LIBCURL"
+
+           AC_LINK_IFELSE(AC_LANG_PROGRAM([#include <curl/curl.h>],[
+/* Try and use a few common options to force a failure if we are
+   missing symbols or can't link. */
+int x;
+curl_easy_setopt(NULL,CURLOPT_URL,NULL);
+x=CURL_ERROR_SIZE;
+x=CURLOPT_WRITEFUNCTION;
+x=CURLOPT_FILE;
+x=CURLOPT_ERRORBUFFER;
+x=CURLOPT_STDERR;
+x=CURLOPT_VERBOSE;
+]),libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no)
+
+           CPPFLAGS=$_libcurl_save_cppflags
+           LDFLAGS=$_libcurl_save_ldflags
+           unset _libcurl_save_cppflags
+           unset _libcurl_save_ldflags
+           ])
+
+        if test $libcurl_cv_lib_curl_usable = yes ; then
+           AC_DEFINE(HAVE_LIBCURL,1,
+             [Define to 1 if you have a functional curl library.])
+           AC_SUBST(LIBCURL_CPPFLAGS)
+           AC_SUBST(LIBCURL)
+
+           for _libcurl_feature in $_libcurl_features ; do
+	      AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_feature_$_libcurl_feature),[1])
+	      eval AS_TR_SH(libcurl_feature_$_libcurl_feature)=yes
+           done
+
+	   if test "x$_libcurl_protocols" = "x" ; then
+
+	      # We don't have --protocols, so just assume that all
+	      # protocols are available
+	      _libcurl_protocols="HTTP FTP GOPHER FILE TELNET LDAP DICT"
+
+	      if test x$libcurl_feature_SSL = xyes ; then
+	         _libcurl_protocols="$_libcurl_protocols HTTPS"
+
+		 # FTPS wasn't standards-compliant until version
+		 # 7.11.0
+		 if test $_libcurl_version -ge 461568; then
+		    _libcurl_protocols="$_libcurl_protocols FTPS"
+		 fi
+	      fi
+	   fi
+
+	   for _libcurl_protocol in $_libcurl_protocols ; do
+	      AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_protocol_$_libcurl_protocol),[1])
+	      eval AS_TR_SH(libcurl_protocol_$_libcurl_protocol)=yes
+           done
+        fi
+     fi
+
+     unset _libcurl_try_link
+     unset _libcurl_version_parse
+     unset _libcurl_config
+     unset _libcurl_feature
+     unset _libcurl_features
+     unset _libcurl_protocol
+     unset _libcurl_protocols
+     unset _libcurl_version
+  fi
+
+  if test x$_libcurl_with = xno || test x$libcurl_cv_lib_curl_usable != xyes ; then
+     # This is the IF-NO path
+     ifelse([$4],,:,[$4])
+  else
+     # This is the IF-YES path
+     ifelse([$3],,:,[$3])
+  fi
+
+  unset _libcurl_with
+])dnl

include/curl/curl.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -245,7 +245,9 @@ typedef enum {
   CURLE_COULDNT_RESOLVE_HOST,    /* 6 */
   CURLE_COULDNT_CONNECT,         /* 7 */
   CURLE_FTP_WEIRD_SERVER_REPLY,  /* 8 */
-  CURLE_FTP_ACCESS_DENIED,       /* 9 */
+  CURLE_FTP_ACCESS_DENIED,       /* 9 a service was denied by the FTP server
+                                    due to lack of access - when login fails
+                                    this is not returned. */
   CURLE_FTP_USER_PASSWORD_INCORRECT, /* 10 */
   CURLE_FTP_WEIRD_PASS_REPLY,    /* 11 */
   CURLE_FTP_WEIRD_USER_REPLY,    /* 12 */
@@ -305,6 +307,8 @@ typedef enum {
   CURLE_SEND_FAIL_REWIND,        /* 65 - Sending the data requires a rewind
                                     that failed */
   CURLE_SSL_ENGINE_INITFAILED,   /* 66 - failed to initialise ENGINE */
+  CURLE_LOGIN_DENIED,            /* 67 - user, password or similar was not
+                                    accepted and we failed to login */
   CURL_LAST /* never use! */
 } CURLcode;
 
@@ -712,7 +716,7 @@ typedef enum {
   CINIT(SSLENGINE_DEFAULT, LONG, 90),
 
   /* Non-zero value means to use the global dns cache */
-  CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To become OBSOLETE soon */
+  CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To becomeO BSOLETE soon */
 
   /* DNS cache timeout */
   CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
@@ -842,25 +846,15 @@ typedef enum {
   /* Enable/disable the TCP Nagle algorithm */
   CINIT(TCP_NODELAY, LONG, 121),
 
-  /* When doing 3rd party transfer, set the source host name with this */
-  CINIT(SOURCE_HOST, OBJECTPOINT, 122),
+  /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
 
   /* When doing 3rd party transfer, set the source user and password with
      this */
   CINIT(SOURCE_USERPWD, OBJECTPOINT, 123),
 
-  /* When doing 3rd party transfer, set the source file path with this */
-  CINIT(SOURCE_PATH, OBJECTPOINT, 124),
-
-  /* When doing 3rd party transfer, set the source server's port number
-     with this */
-  CINIT(SOURCE_PORT, LONG, 125),
-
-  /* When doing 3rd party transfer, decide which server that should get the
-     PASV command (and the other gets the PORT).
-     0 (default) - The target host issues PASV.
-     1           - The source host issues PASV */
-  CINIT(PASV_HOST, LONG, 126),
+  /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
+  /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
 
   /* When doing 3rd party transfer, set the source pre-quote linked list
      of commands with this */
@@ -885,6 +879,17 @@ typedef enum {
   CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130),
   CINIT(IOCTLDATA, OBJECTPOINT, 131),
 
+  /* To make a 3rd party transfer, set the source URL with this */
+  CINIT(SOURCE_URL, OBJECTPOINT, 132),
+
+  /* When doing 3rd party transfer, set the source quote linked list of
+     commands with this */
+  CINIT(SOURCE_QUOTE, OBJECTPOINT, 133),
+
+  /* zero terminated string for pass on to the FTP server when asked for
+     "account" info */
+  CINIT(FTP_ACCOUNT, OBJECTPOINT, 134),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -910,6 +915,11 @@ typedef enum {
 #define CURLOPT_PASSWDDATA     -4
 #define CURLOPT_CLOSEFUNCTION  -5
 
+#define CURLOPT_SOURCE_HOST    -6
+#define CURLOPT_SOURCE_PATH    -7
+#define CURLOPT_SOURCE_PORT    -8
+#define CURLOPT_PASV_HOST      -9
+
 #else
 /* This is set if CURL_NO_OLDIES is defined at compile-time */
 #undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */
@@ -1337,7 +1347,7 @@ typedef enum {
 /* The 'CURLVERSION_NOW' is the symbolic name meant to be used by
    basicly all programs ever, that want to get version information. It is
    meant to be a built-in version number for what kind of struct the caller
-   expects. If the struct ever changes, we redfine the NOW to another enum
+   expects. If the struct ever changes, we redefine the NOW to another enum
    from above. */
 #define CURLVERSION_NOW CURLVERSION_THIRD
 
@@ -1347,11 +1357,11 @@ typedef struct {
   unsigned int version_num; /* LIBCURL_VERSION_NUM */
   const char *host;         /* OS/host/cpu/machine when configured */
   int features;             /* bitmask, see defines below */
-  char *ssl_version;        /* human readable string */
+  const char *ssl_version;  /* human readable string */
   long ssl_version_num;     /* number */
   const char *libz_version;       /* human readable string */
   /* protocols is terminated by an entry with a NULL protoname */
-  const char **protocols;
+  const char * const *protocols;
 
   /* The fields below this were added in CURLVERSION_SECOND */
   const char *ares;
@@ -1372,6 +1382,7 @@ typedef struct {
 #define CURL_VERSION_SPNEGO    (1<<8)  /* SPNEGO auth */
 #define CURL_VERSION_LARGEFILE (1<<9)  /* supports files bigger than 2GB */
 #define CURL_VERSION_IDN       (1<<10) /* International Domain Names support */
+#define CURL_VERSION_SSPI      (1<<11) /* SSPI is supported */
 
 /*
  * NAME curl_version_info()

include/curl/curlver.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -28,7 +28,7 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.12.3-CVS"
+#define LIBCURL_VERSION "7.13.2-CVS"
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
@@ -44,12 +44,12 @@
    always a greater number in a more recent release. It makes comparisons with
    greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x070c03
+#define LIBCURL_VERSION_NUM 0x070d02
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 12
-#define LIBCURL_VERSION_PATCH 3
+#define LIBCURL_VERSION_MINOR 13
+#define LIBCURL_VERSION_PATCH 2
 
 #endif /* __CURL_CURLVER_H */

include/curl/multi.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -67,7 +67,9 @@
 #include <sys/select.h>
 #endif
 
+#ifndef _WIN32_WCE
 #include <sys/socket.h>
+#endif
 #include <sys/time.h>
 #include <sys/types.h>
 #endif

lib/Makefile.Watcom

@@ -0,0 +1,357 @@
+#
+#  Watcom / OpenWatcom / Win32 makefile for libcurl.
+#  G. Vanem <giva@bgnett.no>
+#
+# $Id$
+
+TARGETS = libcurl_wc.lib libcurl_wc.dll libcurl_wc_imp.lib
+
+CC = wcc386
+
+CFLAGS = -3r -mf -d3 -hc -zff -zgf -zq -zm -s -fr=con -w2 -fpi -oilrtfm -bt=nt -bd &
+         -d+ -dWIN32 -dHAVE_LONGLONG -dCURL_CA_BUNDLE=getenv("CURL_CA_BUNDLE") &
+         -dBUILDING_LIBCURL -dWITHOUT_MM_LIB -dHAVE_SPNEGO=1 -dENABLE_IPV6     &
+         -dDEBUG_THREADING_GETADDRINFO -dDEBUG=1 -dCURLDEBUG -I. -I..\include
+
+OBJ_DIR  = Watcom_obj
+LIB_ARG  = $(OBJ_DIR)\wlib.arg
+LINK_ARG = $(OBJ_DIR)\wlink.arg
+
+OBJS = $(OBJ_DIR)\transfer.obj         $(OBJ_DIR)\file.obj       &
+       $(OBJ_DIR)\strequal.obj         $(OBJ_DIR)\timeval.obj    &
+       $(OBJ_DIR)\easy.obj             $(OBJ_DIR)\base64.obj     &
+       $(OBJ_DIR)\security.obj         $(OBJ_DIR)\hostip.obj     &
+       $(OBJ_DIR)\krb4.obj             $(OBJ_DIR)\progress.obj   &
+       $(OBJ_DIR)\memdebug.obj         $(OBJ_DIR)\formdata.obj   &
+       $(OBJ_DIR)\http_chunks.obj      $(OBJ_DIR)\cookie.obj     &
+       $(OBJ_DIR)\strtok.obj           $(OBJ_DIR)\http.obj       &
+       $(OBJ_DIR)\connect.obj          $(OBJ_DIR)\sendf.obj      &
+       $(OBJ_DIR)\llist.obj            $(OBJ_DIR)\ftp.obj        &
+       $(OBJ_DIR)\hash.obj             $(OBJ_DIR)\url.obj        &
+       $(OBJ_DIR)\multi.obj            $(OBJ_DIR)\dict.obj       &
+       $(OBJ_DIR)\content_encoding.obj $(OBJ_DIR)\if2ip.obj      &
+       $(OBJ_DIR)\share.obj            $(OBJ_DIR)\speedcheck.obj &
+       $(OBJ_DIR)\http_digest.obj      $(OBJ_DIR)\ldap.obj       &
+       $(OBJ_DIR)\md5.obj              $(OBJ_DIR)\ssluse.obj     &
+       $(OBJ_DIR)\http_negotiate.obj   $(OBJ_DIR)\version.obj    &
+       $(OBJ_DIR)\http_ntlm.obj        $(OBJ_DIR)\getenv.obj     &
+       $(OBJ_DIR)\inet_pton.obj        $(OBJ_DIR)\escape.obj     &
+       $(OBJ_DIR)\strtoofft.obj        $(OBJ_DIR)\mprintf.obj    &
+       $(OBJ_DIR)\strerror.obj         $(OBJ_DIR)\telnet.obj     &
+       $(OBJ_DIR)\hostares.obj         $(OBJ_DIR)\netrc.obj      &
+       $(OBJ_DIR)\hostasyn.obj         $(OBJ_DIR)\getinfo.obj    &
+       $(OBJ_DIR)\hostip4.obj          $(OBJ_DIR)\hostthre.obj   &
+       $(OBJ_DIR)\hostip6.obj          $(OBJ_DIR)\inet_ntop.obj  &
+       $(OBJ_DIR)\hostsyn.obj          $(OBJ_DIR)\parsedate.obj  &
+       $(OBJ_DIR)\select.obj
+
+RESOURCE = $(OBJ_DIR)\libcurl.res
+
+all: $(OBJ_DIR) $(TARGETS) .SYMBOLIC
+	@echo Welcome to libcurl
+
+$(OBJ_DIR):
+	mkdir $(OBJ_DIR)
+
+libcurl_wc.lib: $(OBJS) $(LIB_ARG)
+	wlib -q -b -c $@ @$(LIB_ARG)
+
+libcurl_wc.dll: $(OBJS) $(RESOURCE) $(LINK_ARG)
+	wlink name libcurl_wc.dll @$(LINK_ARG)
+
+clean: .SYMBOLIC
+	- rm -f $(OBJS) $(RESOURCE)
+
+vclean realclean: clean .SYMBOLIC
+	- rm -f $(TARGETS) $(LIB_ARG) $(LINK_ARG) libcurl_wc.map
+	- rmdir $(OBJ_DIR)
+
+.ERASE
+$(RESOURCE): libcurl.rc
+        wrc -dCURLDEBUG=1 -q -r -zm -I..\include -fo=$@ libcurl.rc
+
+.ERASE
+.c{$(OBJ_DIR)}.obj:
+	$(CC) $[@ $(CFLAGS) -fo=$@
+	@echo .
+
+$(LIB_ARG): $(__MAKEFILES__)
+	%create $^@
+	for %f in ($(OBJS)) do @%append $^@ +- %f
+
+$(LINK_ARG): $(__MAKEFILES__)
+	%create $^@
+	@%append $^@ system nt dll
+	@%append $^@ file { $(OBJS) }
+	@%append $^@ option quiet, map, caseexact, eliminate, implib=libcurl_wc_imp.lib,
+	@%append $^@ res=$(RESOURCE) libpath $(%watcom)\lib386;$(%watcom)\lib386\nt
+	@%append $^@ library clib3r.lib, ws2_32.lib
+
+#
+# Dependencies based on "gcc -MM .."
+#
+$(OBJ_DIR)\file.obj: file.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h progress.h sendf.h escape.h file.h &
+  speedcheck.h getinfo.h transfer.h url.h memory.h ..\include\curl\mprintf.h &
+  memdebug.h
+
+$(OBJ_DIR)\timeval.obj: timeval.c timeval.h setup.h config-win32.h
+
+$(OBJ_DIR)\base64.obj: base64.c setup.h config-win32.h ..\include\curl\mprintf.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h base64.h memory.h ..\include\curl\curl.h &
+  memdebug.h
+
+$(OBJ_DIR)\hostip.obj: hostip.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  inet_ntop.h ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\progress.obj: progress.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h http_chunks.h &
+  hostip.h hash.h llist.h sendf.h progress.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\formdata.obj: formdata.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h strequal.h &
+  memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\cookie.obj: cookie.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h strequal.h strtok.h sendf.h &
+  memory.h memdebug.h
+
+$(OBJ_DIR)\http.obj: http.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h transfer.h sendf.h progress.h &
+  base64.h strequal.h ssluse.h http_digest.h http_ntlm.h http_negotiate.h &
+  url.h share.h http.h memory.h select.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\sendf.obj: sendf.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h connect.h &
+  ..\include\curl\mprintf.h memory.h strerror.h memdebug.h
+
+$(OBJ_DIR)\ftp.obj: ftp.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  if2ip.h progress.h transfer.h escape.h http.h ftp.h strtoofft.h &
+  strequal.h ssluse.h connect.h strerror.h memory.h inet_ntop.h select.h &
+  ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\url.obj: url.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h netrc.h base64.h ssluse.h if2ip.h &
+  transfer.h sendf.h progress.h strequal.h strerror.h escape.h strtok.h &
+  share.h content_encoding.h http_digest.h http_negotiate.h select.h multiif.h &
+  ftp.h dict.h telnet.h http.h file.h ldap.h url.h connect.h inet_ntop.h &
+  ./ca-bundle.h ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\dict.obj: dict.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h transfer.h sendf.h progress.h &
+  strequal.h dict.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\if2ip.obj: if2ip.c setup.h config-win32.h
+
+$(OBJ_DIR)\speedcheck.obj: speedcheck.c setup.h config-win32.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  speedcheck.h
+
+$(OBJ_DIR)\ldap.obj: ldap.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h escape.h transfer.h &
+  strequal.h strtok.h ldap.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\ssluse.obj: ssluse.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h url.h inet_pton.h &
+  ssluse.h connect.h strequal.h select.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\version.obj: version.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\getenv.obj: getenv.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memory.h memdebug.h
+
+$(OBJ_DIR)\escape.obj: escape.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memory.h &
+  ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\mprintf.obj: mprintf.c setup.h config-win32.h ..\include\curl\mprintf.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h memory.h ..\include\curl\curl.h memdebug.h
+
+$(OBJ_DIR)\telnet.obj: telnet.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h transfer.h sendf.h telnet.h &
+  ..\include\curl\mprintf.h arpa_telnet.h memory.h select.h memdebug.h
+
+$(OBJ_DIR)\netrc.obj: netrc.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h netrc.h strequal.h &
+  strtok.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\getinfo.obj: getinfo.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  getinfo.h memory.h ssluse.h memdebug.h
+
+$(OBJ_DIR)\transfer.obj: transfer.c setup.h config-win32.h strtoofft.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h strequal.h urldata.h &
+  cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  netrc.h content_encoding.h transfer.h sendf.h speedcheck.h progress.h &
+  http.h url.h getinfo.h ssluse.h http_digest.h http_ntlm.h &
+  http_negotiate.h share.h memory.h select.h ..\include\curl\mprintf.h &
+  memdebug.h
+
+$(OBJ_DIR)\strequal.obj: strequal.c setup.h config-win32.h strequal.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)\easy.obj: easy.c setup.h config-win32.h strequal.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  transfer.h ssluse.h url.h getinfo.h share.h memory.h progress.h &
+  easyif.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\security.obj: security.c setup.h config-win32.h
+
+$(OBJ_DIR)\krb4.obj: krb4.c setup.h config-win32.h
+
+$(OBJ_DIR)\memdebug.obj: memdebug.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h ..\include\curl\mprintf.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h memory.h memdebug.h
+
+$(OBJ_DIR)\http_chunks.obj: http_chunks.c setup.h config-win32.h urldata.h &
+  cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  content_encoding.h http.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\strtok.obj: strtok.c setup.h config-win32.h strtok.h
+
+$(OBJ_DIR)\connect.obj: connect.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h if2ip.h strerror.h connect.h &
+  memory.h select.h memdebug.h
+
+$(OBJ_DIR)\llist.obj: llist.c setup.h config-win32.h llist.h memory.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memdebug.h
+
+$(OBJ_DIR)\hash.obj: hash.c setup.h config-win32.h hash.h llist.h memory.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memdebug.h
+
+$(OBJ_DIR)\multi.obj: multi.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  transfer.h url.h connect.h progress.h memory.h easyif.h multiif.h &
+  memdebug.h
+
+$(OBJ_DIR)\content_encoding.obj: content_encoding.c setup.h config-win32.h urldata.h &
+  cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  content_encoding.h memory.h memdebug.h
+
+$(OBJ_DIR)\share.obj: share.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h share.h memory.h memdebug.h
+
+$(OBJ_DIR)\http_digest.obj: http_digest.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h strequal.h base64.h md5.h &
+  http_digest.h strtok.h url.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\md5.obj: md5.c setup.h config-win32.h md5.h
+
+$(OBJ_DIR)\http_negotiate.obj: http_negotiate.c setup.h config-win32.h
+
+$(OBJ_DIR)\http_ntlm.obj: http_ntlm.c setup.h config-win32.h
+
+$(OBJ_DIR)\inet_pton.obj: inet_pton.c setup.h config-win32.h inet_pton.h
+
+$(OBJ_DIR)\strtoofft.obj: strtoofft.c setup.h config-win32.h strtoofft.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)\strerror.obj: strerror.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h strerror.h urldata.h &
+  cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\hostares.obj: hostares.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostasyn.obj: hostasyn.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostip4.obj: hostip4.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostip6.obj: hostip6.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostsyn.obj: hostsyn.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostthre.obj: hostthre.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h inet_ntop.h memory.h memdebug.h
+
+$(OBJ_DIR)\inet_ntop.obj: inet_ntop.c setup.h config-win32.h ..\include\curl\mprintf.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h inet_ntop.h
+
+$(OBJ_DIR)\parsedate.obj: parsedate.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)\select.obj: select.c setup.h config-win32.h select.h

lib/Makefile.am

@@ -5,7 +5,7 @@
 #                            | (__| |_| |  _ <| |___
 #                             \___|\___/|_| \_\_____|
 #
-# Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 #
 # This software is licensed as described in the file COPYING, which
 # you should have received as part of this distribution. The terms
@@ -25,12 +25,12 @@ AUTOMAKE_OPTIONS = foreign nostdinc
 DSP = curllib.dsp
 
 EXTRA_DIST = Makefile.b32 Makefile.m32 Makefile.vc6 Makefile.riscos $(DSP)    \
- curllib.dsw config-vms.h config-win32.h config-win32ce.h config-riscos.h     \
+ curllib.dsw config-win32.h config-win32ce.h config-riscos.h     \
  config-mac.h config.h.in ca-bundle.crt README.encoding README.memoryleak     \
  README.ares README.curlx makefile.dj config.dj libcurl.framework.make	      \
  libcurl.plist libcurl.rc config-amigaos.h amigaos.c amigaos.h makefile.amiga \
  Makefile.netware nwlib.c libcurl.imp msvcproj.head msvcproj.foot	      \
- config-win32ce.h README.httpauth
+ config-win32ce.h README.httpauth Makefile.Watcom README.hostip
 
 CLEANFILES = $(DSP)
 

lib/Makefile.inc

@@ -13,8 +13,8 @@ CSOURCES = file.c timeval.c base64.c hostip.c progress.c formdata.c	\
 HHEADERS = arpa_telnet.h netrc.h file.h timeval.h base64.h hostip.h	\
   progress.h formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h	\
   if2ip.h speedcheck.h urldata.h ldap.h ssluse.h escape.h telnet.h	\
-  getinfo.h strequal.h security.h krb4.h memdebug.h inet_ntoa_r.h	\
+  getinfo.h strequal.h krb4.h memdebug.h inet_ntoa_r.h \
   http_chunks.h strtok.h connect.h llist.h hash.h content_encoding.h	\
   share.h md5.h http_digest.h http_negotiate.h http_ntlm.h ca-bundle.h	\
   inet_pton.h strtoofft.h strerror.h inet_ntop.h curlx.h memory.h	\
-  setup.h transfer.h select.h
+  setup.h transfer.h select.h easyif.h multiif.h parsedate.h

lib/Makefile.netware

@@ -27,7 +27,7 @@ endif
 # Edit the vars below to change NLM target settings.
 TARGET  = libcurl
 VERSION	= $(LIBCURL_VERSION)
-COPYR	= Copyright (c) 1996 - 2004, Daniel Stenberg, <daniel@haxx.se>
+COPYR	= Copyright (C) 1996 - 2005, Daniel Stenberg, <daniel@haxx.se>
 DESCR	= cURL libcurl $(LIBCURL_VERSION_STR) - http://curl.haxx.se
 MTSAFE	= YES
 STACK	= 64000
@@ -336,6 +336,7 @@ config.h: Makefile.netware
 	@echo $(DL)#define SIZEOF_CURL_OFF_T 4$(DL) >> $@
 	@echo $(DL)#define STDC_HEADERS 1$(DL) >> $@
 	@echo $(DL)#define TIME_WITH_SYS_TIME 1$(DL) >> $@
+	@echo $(DL)#define CURL_DISABLE_LDAP 1$(DL) >> $@
 ifdef NW_WINSOCK
 	@echo $(DL)#define HAVE_CLOSESOCKET 1$(DL) >> $@
 else

lib/Makefile.vc6

@@ -35,13 +35,31 @@ IMPLIB_NAME       = libcurl_imp
 IMPLIB_NAME_DEBUG = libcurld_imp
 
 !IFNDEF OPENSSL_PATH
-OPENSSL_PATH   = ../../openssl-0.9.7d
+OPENSSL_PATH   = ../../openssl-0.9.7e
 !ENDIF
 
 !IFNDEF ZLIB_PATH
 ZLIB_PATH  = ../../zlib-1.2.1
 !ENDIF
 
+# USE_WINDOWS_SSPI uses windows libraries to allow NTLM authentication
+# without an openssl installation and offers the ability to authenticate
+# using the "current logged in user".  It does however require that the
+# Windows SDK be installed.
+#
+# If, for some reason the Windows SDK is installed but not installed
+# in the default location, you can specify WINDOWS_SDK_PATH.
+# It can be downloaded from:
+# http://www.microsoft.com/msdownload/platformsdk/sdkupdate/
+
+# USE_WINDOWS_SSPI = 1
+
+!IFDEF WINDOWS_SSPI
+!IFNDEF WINDOWS_SDK_PATH
+WINDOWS_SDK_PATH = "C:\Program Files\Microsoft SDK"
+!ENDIF
+!ENDIF
+
 # Use the high resolution time by default.  Comment this out to use low
 # resolution time and not require winmm.lib
 USEMM_LIBS = YES
@@ -58,6 +76,8 @@ LNKDLL     = link.exe /DLL
 LNKLIB     = link.exe /lib
 LFLAGS     = /nologo
 SSLLIBS    = libeay32.lib ssleay32.lib
+ZLIBLIBSDLL= zdll.lib
+ZLIBLIBS   = zlib.lib
 !IFDEF USEMM_LIBS
 WINLIBS    = wsock32.lib winmm.lib
 !ELSE
@@ -67,13 +87,18 @@ CFLAGS     = $(CFLAGS) /DWITHOUT_MM_LIB
 #  RSAglue.lib was formerly needed in the SSLLIBS
 CFGSET     = FALSE
 
+!IFDEF WINDOWS_SSPI
+CFLAGS = $(CFLAGS) /DUSE_WINDOWS_SSPI /I$(WINDOWS_SDK_PATH)\include
+LFLAGS = $(LFLAGS) $(WINDOWS_SDK_PATH)\lib\secur32.lib
+!ENDIF
+
 ######################
 # release
 
 !IF "$(CFG)" == "release"
 TARGET = $(LIB_NAME).lib
-DIROBJ = .\$(CFG)
-LNK    = $(LNKLIB) /out:$(TARGET)
+DIROBJ = $(CFG)
+LNK    = $(LNKLIB) /out:$(DIROBJ)\$(TARGET)
 CC     = $(CCNODBG)
 CFGSET = TRUE
 !ENDIF
@@ -83,9 +108,9 @@ CFGSET = TRUE
 
 !IF "$(CFG)" == "release-zlib"
 TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
-LNK      = $(LNKLIB) $(LFLAGSZLIB) /out:$(TARGET)
+LNK      = $(LNKLIB) $(ZLIBLIBS) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCNODBG) $(CFLAGSZLIB)
 CFGSET   = TRUE
 !ENDIF
@@ -95,8 +120,8 @@ CFGSET   = TRUE
 
 !IF "$(CFG)" == "release-dll"
 TARGET = $(LIB_NAME).dll
-DIROBJ = .\$(CFG)
-LNK    = $(LNKDLL) $(WINLIBS) /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME).lib
+DIROBJ = $(CFG)
+LNK    = $(LNKDLL) $(WINLIBS) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
 CC     = $(CCNODBG)
 CFGSET = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
@@ -107,9 +132,9 @@ RESOURCE = $(DIROBJ)\libcurl.res
 
 !IF "$(CFG)" == "release-ssl"
 TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32"
-LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(TARGET)
+DIROBJ   = $(CFG)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
+LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCNODBG) $(CFLAGSSSL)
 CFGSET   = TRUE
 !ENDIF
@@ -119,80 +144,122 @@ CFGSET   = TRUE
 
 !IF "$(CFG)" == "release-ssl-dll"
 TARGET   = $(LIB_NAME).dll
-DIROBJ   = .\$(CFG)
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32dll"
-LNK      = $(LNKDLL) $(SSLLIBS) $(WINLIBS) $(LFLAGSSSL) /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME).lib
+DIROBJ   = $(CFG)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) /out:$(DIROBJ)\$(TARGET) $(SSLLIBS) $(LFLAGSSSL) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
 CC       = $(CCNODBG) $(CFLAGSSSL)
 CFGSET   = TRUE
-RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
 
 ######################
 # release-ssl-zlib
+
 !IF "$(CFG)" == "release-ssl-zlib"
 TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32"
+DIROBJ   = $(CFG)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
-LNK      = $(LNKLIB) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(TARGET)
+LNK      = $(LNKLIB) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB)
 CFGSET   = TRUE
 !ENDIF
 
 ######################
-# release-libcurl-ssl-dll
-!IF "$(CFG)" == "release-libcurl-ssl-dll"
-TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32dll"
-LNK      = $(LNKLIB) $(SSLLIBS) $(LFLAGSSSL) /out:$(TARGET)
+# release-dll-ssl-dll
+
+!IF "$(CFG)" == "release-dll-ssl-dll"
+TARGET   = $(LIB_NAME).dll
+DIROBJ   = $(CFG)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
 CC       = $(CCNODBG) $(CFLAGSSSL)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
 
+######################
+# release-zlib-dll
+
+!IF "$(CFG)" == "release-zlib-dll"
+TARGET   = $(LIB_NAME).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKLIB) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCNODBG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# release-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "release-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# release-dll-zlib-dll
+
+!IF "$(CFG)" == "release-dll-zlib-dll"
+TARGET   = $(LIB_NAME).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKDLL) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
+CC       = $(CCNODBG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# release-dll-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "release-dll-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
+CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
 
 ######################
 # debug
 
 !IF "$(CFG)" == "debug"
 TARGET = $(LIB_NAME_DEBUG).lib
-DIROBJ = .\$(CFG)
-LNK    = $(LNKLIB) /out:$(TARGET)
+DIROBJ = $(CFG)
+LNK    = $(LNKLIB) /out:$(DIROBJ)\$(TARGET)
 CC     = $(CCDEBUG)
 CFGSET = TRUE
 !ENDIF
 
-######################
-# debug-dll
-
-!IF "$(CFG)" == "debug-dll"
-TARGET = $(LIB_NAME_DEBUG).dll
-DIROBJ = .\$(CFG)
-LNK    = $(LNKDLL) $(WINLIBS) /DEBUG /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME_DEBUG).lib /PDB:$(IMPLIB_NAME_DEBUG).pdb
-CC     = $(CCDEBUG)
-CFGSET = TRUE
-RESOURCE = $(DIROBJ)\libcurl.res
-!ENDIF
-
 ######################
 # debug-ssl
-#todo
+
 !IF "$(CFG)" == "debug-ssl"
 TARGET   = $(LIB_NAME_DEBUG).lib
-DIROBJ   = .\$(CFG)
-LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(TARGET)
+DIROBJ   = $(CFG)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
+LNK      = $(LNKLIB) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCDEBUG) $(CFLAGSSSL)
 CFGSET   = TRUE
 !ENDIF
 
 ######################
 # debug-zlib
+
 !IF "$(CFG)" == "debug-zlib"
 TARGET   = $(LIB_NAME_DEBUG).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
-LNK      = $(LNKLIB) $(LFLAGSZLIB) /out:$(TARGET)
+LNK      = $(LNKLIB) $(ZLIBLIBS) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCDEBUG) $(CFLAGSZLIB)
 CFGSET   = TRUE
 !ENDIF
@@ -201,38 +268,151 @@ CFGSET   = TRUE
 # debug-ssl-dll
 
 !IF "$(CFG)" == "debug-ssl-dll"
-TARGET   = $(LIB_NAME_DEBUG).dll
-DIROBJ   = .\$(CFG)
-LFLAGSSSL = /LIBPATH:$(OPENSSL_PATH)/out32dll
-LNK      = $(LNKDLL) $(WINLIBS) $(LFLAGSSSL) /DEBUG /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME_DEBUG).lib /PDB:$(IMPLIB_NAME_DEBUG).pdb
+TARGET   = $(LIB_NAME_DEBUG).lib
+DIROBJ   = $(CFG)
+LFLAGSSSL = /LIBPATH:$(OPENSSL_PATH)\out32dll
+LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCDEBUG) $(CFLAGSSSL)
 CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-ssl-zlib
+
+!IF "$(CFG)" == "debug-ssl-zlib"
+TARGET   = $(LIB_NAME_DEBUG).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
+LNK      = $(LNKLIB) $(SSLLIBS) $(ZLIBLIBS) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-zlib-dll
+
+!IF "$(CFG)" == "debug-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKLIB) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "debug-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-dll
+
+!IF "$(CFG)" == "debug-dll"
+TARGET = $(LIB_NAME_DEBUG).dll
+DIROBJ = $(CFG)
+LNK    = $(LNKDLL) $(WINLIBS) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC     = $(CCDEBUG)
+CFGSET = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# debug-dll-ssl-dll
+
+!IF "$(CFG)" == "debug-dll-ssl-dll"
+TARGET   = $(LIB_NAME_DEBUG).dll
+DIROBJ   = $(CFG)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC       = $(CCDEBUG) $(CFLAGSSSL)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# debug-dll-zlib-dll
+
+!IF "$(CFG)" == "debug-dll-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKDLL) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC       = $(CCDEBUG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# debug-dll-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "debug-dll-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
 
 #######################
 # Usage
 #
-!IF "$(CFGSET)" == "FALSE"
+!IF "$(CFGSET)" == "FALSE" && "$(CFG)" != ""
 !MESSAGE Usage: nmake /f makefile.vc6 CFG=<config> <target>
 !MESSAGE where <config> is one of:
-!MESSAGE   release          - release static library
-!MESSAGE   release-dll      - release dll
-!MESSAGE   release-zlib     - release static library with zlib
-!MESSAGE   release-ssl      - release static library with ssl
-!MESSAGE   release-ssl-zlib - release static library with ssl and zlib
-!MESSAGE   release-ssl-dll  - release dll library with ssl
-!MESSAGE   release-libcurl-ssl-dll - static libcurl with shared ssl
-!MESSAGE   debug            - debug static library
-!MESSAGE   debug-dll        - debug dll
-!MESSAGE   debug-zlib       - debug static library with zlib
-!MESSAGE   debug-ssl        - debug static library with ssl
-!MESSAGE   debug-ssl-dll    - debug dll library with ssl
+!MESSAGE   release                      - release static library
+!MESSAGE   release-ssl                  - release static library with ssl
+!MESSAGE   release-zlib                 - release static library with zlib
+!MESSAGE   release-ssl-zlib             - release static library with ssl and zlib
+!MESSAGE   release-ssl-dll              - release static library with dynamic ssl
+!MESSAGE   release-zlib-dll             - release static library with dynamic zlib
+!MESSAGE   release-ssl-dll-zlib-dll     - release static library with dynamic ssl and dynamic zlib
+!MESSAGE   release-dll                  - release dynamic library
+!MESSAGE   release-dll-ssl-dll          - release dynamic library with dynamic ssl
+!MESSAGE   release-dll-zlib-dll         - release dynamic library with dynamic zlib
+!MESSAGE   release-dll-ssl-dll-zlib-dll - release dynamic library with dynamic ssl and dynamic zlib
+!MESSAGE   debug                        - debug static library
+!MESSAGE   debug-ssl                    - debug static library with ssl
+!MESSAGE   debug-zlib                   - debug static library with zlib
+!MESSAGE   debug-ssl-zlib               - debug static library with ssl and zlib
+!MESSAGE   debug-ssl-dll                - debug static library with dynamic ssl
+!MESSAGE   debug-zlib-dll               - debug static library with dynamic zlib
+!MESSAGE   debug-ssl-dll-zlib-dll       - debug static library with dynamic ssl and dynamic zlib
+!MESSAGE   debug-dll                    - debug dynamic library
+!MESSAGE   debug-dll-ssl-dll            - debug dynamic library with dynamic ssl
+!MESSAGE   debug-dll-zlib-dll           - debug dynamic library with dynamic zlib1
+!MESSAGE   debug-dll-ssl-dll-zlib-dll   - debug dynamic library with dynamic ssl and dynamic zlib
 !MESSAGE <target> can be left blank in which case all is assumed
 !ERROR please choose a valid configuration "$(CFG)"
 !ENDIF
 
 #######################
+# Only the clean target can be used if a config was not provided.
+#
+!IF "$(CFGSET)" == "FALSE"
+clean:
+	@-erase /s *.dll 2> NUL
+	@-erase /s *.exp 2> NUL
+	@-erase /s *.idb 2> NUL
+	@-erase /s *.lib 2> NUL
+	@-erase /s *.obj 2> NUL
+	@-erase /s *.pch 2> NUL
+	@-erase /s *.pdb 2> NUL
+	@-erase /s *.res 2> NUL
+!ELSE
+# A config was provided, so the library can be built.
 #
 X_OBJS= \
 	$(DIROBJ)\base64.obj \
@@ -290,9 +470,16 @@ X_OBJS= \
 
 all : $(TARGET)
 
-
 $(TARGET): $(X_OBJS)
 	$(LNK) $(LFLAGS) $(X_OBJS)
+	-xcopy $(DIROBJ)\$(LIB_NAME).dll       . /y
+	-xcopy $(DIROBJ)\$(LIB_NAME).lib       . /y
+	-xcopy $(DIROBJ)\$(LIB_NAME_DEBUG).dll . /y
+	-xcopy $(DIROBJ)\$(LIB_NAME_DEBUG).lib . /y
+	-xcopy $(DIROBJ)\$(IMPLIB_NAME).lib    . /y
+	-xcopy $(DIROBJ)\$(IMPLIB_NAME_DEBUG).lib . /y
+	-xcopy $(DIROBJ)\*.exp                 . /y
+	-xcopy $(DIROBJ)\*.pdb                 . /y
 
 $(X_OBJS): $(DIROBJ)
 
@@ -305,18 +492,14 @@ $(DIROBJ):
 	$(CC) $(CFLAGS) /Fo"$@"  $<
 
 debug-dll\libcurl.res \
-debug-ssl-dll\libcurl.res \
-release-libcurl-ssl-dll\libcurl.res: libcurl.rc
+debug-dll-ssl-dll\libcurl.res \
+debug-dll-zlib-dll\libcurl.res \
+debug-dll-ssl-dll-zlib-dll\libcurl.res: libcurl.rc
 	rc /dCURLDEBUG=1 /Fo $@ libcurl.rc
 
 release-dll\libcurl.res \
-release-ssl-dll\libcurl.res \
-release-libcurl-ssl-dll\libcurl.res: libcurl.rc
+release-dll-ssl-dll\libcurl.res \
+release-dll-zlib-dll\libcurl.res \
+release-dll-ssl-dll-zlib-dll\libcurl.res: libcurl.rc
 	rc /dCURLDEBUG=0 /Fo $@ libcurl.rc
-
-clean:
-	-@erase $(DIROBJ)\*.obj
-	-@erase $(DIROBJ)\*.res
-	-@erase vc60.idb
-	-@erase vc60.pch
-
+!ENDIF  # End of case where a config was provided.

lib/README.hostip

@@ -0,0 +1,35 @@
+ hostip.c explained
+ ==================
+
+ The main COMPILE-TIME DEFINES to keep in mind when reading the host*.c
+ source file are these:
+
+ CURLRES_IPV6 - this host has getaddrinfo() and family, and thus we use
+ that. The host may not be able to resolve IPv6, but we don't really have to
+ take that into account. Hosts that aren't IPv6-enabled have CURLRES_IPV4
+ defined.
+
+ CURLRES_ARES - is defined if libcurl is built to use c-ares for asynchronous
+ name resolves. It cannot have ENABLE_IPV6 defined at the same time, as c-ares
+ has no ipv6 support. This can be Windows or *nix.
+
+ CURLRES_THREADED - is defined if libcurl is built to run under (native)
+ Windows, and then the name resolve will be done in a new thread, and the
+ supported asynch API will be the same as for ares-builds.
+
+ If any of the two previous are defined, CURLRES_ASYNCH is defined too. If
+ libcurl is not built to use an asynchronous resolver, CURLRES_SYNCH is
+ defined.
+
+ The host*.c sources files are split up like this:
+
+ hostip.c   - method-independent resolver functions and utility functions
+ hostasyn.c - functions for asynchronous name resolves
+ hostsyn.c  - functions for synchronous name resolves
+ hostares.c - functions for ares-using name resolves
+ hostthre.c - functions for threaded name resolves
+ hostip4.c  - ipv4-specific functions
+ hostip6.c  - ipv6-specific functions
+
+ The hostip.h is the single united header file for all this. It defines the
+ CURLRES_* defines based on the config*.h and setup.h defines.

lib/arpa_telnet.h

@@ -39,7 +39,7 @@
 /*
  * The telnet options represented as strings
  */
-static const char *telnetoptions[]=
+static const char * const telnetoptions[]=
 {
   "BINARY",      "ECHO",           "RCP",           "SUPPRESS GO AHEAD",
   "NAME",        "STATUS",         "TIMING MARK",   "RCTE",
@@ -78,7 +78,7 @@ static const char *telnetoptions[]=
 /*
  * Then those numbers represented as strings:
  */
-static const char *telnetcmds[]=
+static const char * const telnetcmds[]=
 {
   "EOF",  "SUSP",  "ABORT", "EOR",  "SE",
   "NOP",  "DMARK", "BRK",   "IP",   "AO",

lib/base64.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -76,10 +76,10 @@ static void decodeQuantum(unsigned char *dest, const char *src)
 /*
  * Curl_base64_decode()
  *
- * Given a base64 string at src, decode it into the memory pointed to by
- * dest. Returns the length of the decoded data.
+ * Given a base64 string at src, decode it and return an allocated memory in
+ * the *outptr. Returns the length of the decoded data.
  */
-size_t Curl_base64_decode(const char *src, char *dest)
+size_t Curl_base64_decode(const char *src, unsigned char **outptr)
 {
   int length = 0;
   int equalsTerm = 0;
@@ -87,25 +87,49 @@ size_t Curl_base64_decode(const char *src, char *dest)
   int numQuantums;
   unsigned char lastQuantum[3];
   size_t rawlen=0;
+  unsigned char *newstr;
+
+  *outptr = NULL;
 
   while((src[length] != '=') && src[length])
     length++;
-  while(src[length+equalsTerm] == '=')
+  /* A maximum of two = padding characters is allowed */
+  if(src[length] == '=') {
     equalsTerm++;
-
+    if(src[length+equalsTerm] == '=')
+      equalsTerm++;
+  }
   numQuantums = (length + equalsTerm) / 4;
 
+  /* Don't allocate a buffer if the decoded length is 0 */
+  if (numQuantums <= 0)
+    return 0;
+
   rawlen = (numQuantums * 3) - equalsTerm;
 
+  /* The buffer must be large enough to make room for the last quantum
+  (which may be partially thrown out) and the zero terminator. */
+  newstr = malloc(rawlen+4);
+  if(!newstr)
+    return 0;
+
+  *outptr = newstr;
+
+  /* Decode all but the last quantum (which may not decode to a
+  multiple of 3 bytes) */
   for(i = 0; i < numQuantums - 1; i++) {
-    decodeQuantum((unsigned char *)dest, src);
-    dest += 3; src += 4;
+    decodeQuantum((unsigned char *)newstr, src);
+    newstr += 3; src += 4;
   }
 
+  /* This final decode may actually read slightly past the end of the buffer
+  if the input string is missing pad bytes.  This will almost always be
+  harmless. */
   decodeQuantum(lastQuantum, src);
   for(i = 0; i < 3 - equalsTerm; i++)
-    dest[i] = lastQuantum[i];
+    newstr[i] = lastQuantum[i];
 
+  newstr[i] = 0; /* zero terminate */
   return rawlen;
 }
 

lib/base64.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -23,5 +23,5 @@
  * $Id$
  ***************************************************************************/
 size_t Curl_base64_encode(const char *input, size_t size, char **str);
-size_t Curl_base64_decode(const char *source, char *dest);
+size_t Curl_base64_decode(const char *source, unsigned char **outptr);
 #endif

lib/config-amigaos.h

@@ -57,6 +57,8 @@
 
 #define USE_OPENSSL 1
 #define USE_SSLEAY 1
+#define CURL_DISABLE_LDAP 1
+
 
 #define OS "AmigaOS"
 

lib/config-mac.h

@@ -36,6 +36,8 @@
 #       define USE_OPENSSL      1
 #endif
 
+#define CURL_DISABLE_LDAP       1
+
 #define HAVE_RAND_STATUS        1
 #define HAVE_RAND_EGD           1
 

lib/config-riscos.h

@@ -388,3 +388,6 @@
 
 #define HAVE_FIONBIO
 
+/* to disable LDAP */
+#define CURL_DISABLE_LDAP
+

lib/config-vms.h

@@ -1,385 +0,0 @@
-/* Define if on AIX 3.
-   System headers sometimes define this.
-   We just want to avoid a redefinition error message.  */
-#ifndef _ALL_SOURCE
-#undef _ALL_SOURCE
-#endif
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#define TIME_WITH_SYS_TIME 1
-
-/* Define cpu-machine-OS */
-#define OS "ALPHA-COMPAQ-VMS"
-
-/* Define if you have the gethostbyaddr_r() function with 5 arguments */
-#undef HAVE_GETHOSTBYADDR_R_5
-
-/* Define if you have the gethostbyaddr_r() function with 7 arguments */
-#undef HAVE_GETHOSTBYADDR_R_7
-
-/* Define if you have the gethostbyaddr_r() function with 8 arguments */
-#undef HAVE_GETHOSTBYADDR_R_8
-
-/* Define if you have the gethostbyname_r() function with 3 arguments */
-#undef HAVE_GETHOSTBYNAME_R_3
-
-/* Define if you have the gethostbyname_r() function with 5 arguments */
-#undef HAVE_GETHOSTBYNAME_R_5
-
-/* Define if you have the gethostbyname_r() function with 6 arguments */
-#undef HAVE_GETHOSTBYNAME_R_6
-
-/* Define if you have the inet_ntoa_r function declared. */
-#undef HAVE_INET_NTOA_R_DECL
-
-/* Define if you need the _REENTRANT define for some functions */
-#undef NEED_REENTRANT
-
-/* Define if you have the Kerberos4 libraries (including -ldes) */
-#undef HAVE_KRB4
-
-/* Define this to 'int' if ssize_t is not an available typedefed type */
-#undef ssize_t
-
-/* Define this to 'int' if socklen_t is not an available typedefed type */
-#define socklen_t size_t
-
-/* Define this as a suitable file to read random data from */
-#undef RANDOM_FILE
-
-/* Define this to your Entropy Gathering Daemon socket pathname */
-#undef EGD_SOCKET
-
-/* The number of bytes in a long double.  */
-#define SIZEOF_LONG_DOUBLE 8
-
-/* The number of bytes in a long long.  */
-#define SIZEOF_LONG_LONG 8
-
-/* Define if you have the RAND_egd function.  */
-#undef HAVE_RAND_EGD
-
-/* Define if you have the RAND_screen function.  */
-#undef HAVE_RAND_SCREEN
-
-/* Define if you have the RAND_status function.  */
-#undef HAVE_RAND_STATUS
-
-/* Define if you have the closesocket function.  */
-#undef HAVE_CLOSESOCKET
-
-/* Define if you have the geteuid function.  */
-#define HAVE_GETEUID 1
-
-/* Define if you have the gethostbyaddr function.  */
-#define HAVE_GETHOSTBYADDR 1
-
-/* Define if you have the gethostbyaddr_r function.  */
-#undef HAVE_GETHOSTBYADDR_R
-
-/* Define if you have the gethostbyname_r function.  */
-#undef HAVE_GETHOSTBYNAME_R
-
-/* Define if you have the gethostname function.  */
-#define HAVE_GETHOSTNAME 1
-
-/* Define if you have the getpass_r function.  */
-#undef HAVE_GETPASS_R
-
-/* Define if you have the getpwuid function.  */
-#define HAVE_GETPWUID 1
-
-/* Define if you have the getservbyname function.  */
-#define HAVE_GETSERVBYNAME 1
-
-/* Define if you have the gettimeofday function.  */
-#define HAVE_GETTIMEOFDAY 1
-
-/* Define if you have the inet_addr function.  */
-#define HAVE_INET_ADDR 1
-
-/* Define if you have the inet_ntoa function.  */
-#define HAVE_INET_NTOA 1
-
-/* Define if you have the inet_ntoa_r function.  */
-#undef HAVE_INET_NTOA_R
-
-/* Define if you have the krb_get_our_ip_for_realm function.  */
-#undef HAVE_KRB_GET_OUR_IP_FOR_REALM
-
-/* Define if you have the localtime_r function.  */
-#undef HAVE_LOCALTIME_R
-
-/* Define if you have the perror function.  */
-#define HAVE_PERROR 1
-
-/* Define if you have the select function.  */
-#define HAVE_SELECT 1
-
-/* Define if you have the setvbuf function.  */
-#undef HAVE_SETVBUF
-
-/* Define if you have the sigaction function.  */
-#define HAVE_SIGACTION 1
-
-/* Define if you have the signal function.  */
-#define HAVE_SIGNAL 1
-
-/* Define if you have the socket function.  */
-#define HAVE_SOCKET 1
-
-/* Define if you have the strcasecmp function.  */
-#define HAVE_STRCASECMP 1
-
-/* Define if you have the strcmpi function.  */
-#define HAVE_STRCMPI 1
-
-/* Define if you have the strdup function.  */
-#define HAVE_STRDUP 1
-
-/* Define if you have the strftime function.  */
-#define HAVE_STRFTIME 1
-
-/* Define if you have the stricmp function.  */
-#define HAVE_STRICMP 1
-
-/* Define if you have the strlcat function.  */
-#undef HAVE_STRLCAT
-
-/* Define if you have the strlcpy function.  */
-#undef HAVE_STRLCPY
-
-/* Define if you have the strstr function.  */
-#define  HAVE_STRSTR 1
-
-/* Define if you have the tcgetattr function.  */
-#undef HAVE_TCGETATTR
-
-/* Define if you have the tcsetattr function.  */
-#undef HAVE_TCSETATTR
-
-/* Define if you have the uname function.  */
-#define HAVE_UNAME 1
-
-/* Define if you have the <alloca.h> header file.  */
-#undef HAVE_ALLOCA_H
-
-/* Define if you have the <arpa/inet.h> header file.  */
-#undef HAVE_ARPA_INET_H
-
-/* Define if you have the <crypto.h> header file.  */
-#undef HAVE_CRYPTO_H
-
-/* Define if you have the <des.h> header file.  */
-#undef HAVE_DES_H
-
-/* Define if you have the <dlfcn.h> header file.  */
-#undef HAVE_DLFCN_H
-
-/* Define if you have the <err.h> header file.  */
-#define HAVE_ERR_H 1
-
-/* Define if you have the <fcntl.h> header file.  */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the <getopt.h> header file.  */
-#define HAVE_GETOPT_H 1
-
-/* Define if you have the <io.h> header file.  */
-#undef HAVE_IO_H
-
-/* Define if you have the <krb.h> header file.  */
-#undef HAVE_KRB_H
-
-/* Define if you have the <malloc.h> header file.  */
-#define HAVE_MALLOC_H 1
-
-/* Define if you have the <net/if.h> header file.  */
-#define HAVE_NET_IF_H 1
-
-/* Define if you have the <netdb.h> header file.  */
-#define HAVE_NETDB_H 1
-
-/* Define if you have the <netinet/if_ether.h> header file.  */
-#define HAVE_NETINET_IF_ETHER_H 1
-
-/* Define if you have the <netinet/in.h> header file.  */
-#define HAVE_NETINET_IN_H 1
-
-/* Define if you have the <openssl/crypto.h> header file.  */
-#define HAVE_OPENSSL_CRYPTO_H 1
-
-/* Define if you have the <openssl/err.h> header file.  */
-#define HAVE_OPENSSL_ERR_H      1
-
-/* Define if you have the <openssl/pem.h> header file.  */
-#define HAVE_OPENSSL_PEM_H      1
-
-/* Define if you have the <openssl/rsa.h> header file.  */
-#define HAVE_OPENSSL_RSA_H 1
-
-/* Define if you have the <openssl/ssl.h> header file.  */
-#define HAVE_OPENSSL_SSL_H      1
-
-/* Define if you have the <openssl/x509.h> header file.  */
-#define HAVE_OPENSSL_X509_H     1
-
-/* Define if you have the <pem.h> header file.  */
-#undef HAVE_PEM_H
-
-/* Define if you have the <pwd.h> header file.  */
-#define HAVE_PWD_H 1
-
-/* Define if you have the <rsa.h> header file.  */
-#undef HAVE_RSA_H
-
-/* Define if you have the <sgtty.h> header file.  */
-#define HAVE_SGTTY_H 1
-
-/* Define if you have the <ssl.h> header file.  */
-#undef HAVE_SSL_H
-
-/* Define if you have the <stdlib.h> header file.  */
-#define HAVE_STDLIB_H 1
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/select.h> header file.  */
-#undef HAVE_SYS_SELECT_H
-
-/* Define if you have the <sys/socket.h> header file.  */
-#define HAVE_SYS_SOCKET_H 1
-
-/* Define if you have the <sys/sockio.h> header file.  */
-#undef HAVE_SYS_SOCKIO_H
-
-/* Define if you have the <sys/stat.h> header file.  */
-#define HAVE_SYS_STAT_H 1
-
-/* Define if you have the <sys/time.h> header file.  */
-#define HAVE_SYS_TIME_H 1
-
-/* Define if you have the <sys/types.h> header file.  */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define if you have the <termio.h> header file.  */
-#undef HAVE_TERMIO_H
-
-/* Define if you have the <termios.h> header file.  */
-#define HAVE_TERMIOS_H 1
-
-/* Define if you have the <time.h> header file.  */
-#define HAVE_TIME_H 1
-
-/* Define if you have the <unistd.h> header file.  */
-#define HAVE_UNISTD_H 1
-
-/* Define if you have the <winsock.h> header file.  */
-#undef HAVE_WINSOCK_H
-
-/* Define if you have the <x509.h> header file.  */
-#undef HAVE_X509_H
-
-/* Define if you have the crypto library (-lcrypto).  */
-#define HAVE_LIBCRYPTO 1
-
-/* Define if you have the dl library (-ldl).  */
-#undef HAVE_LIBDL
-
-/* Define if you have the nsl library (-lnsl).  */
-#undef HAVE_LIBNSL
-
-/* Define if you have the resolv library (-lresolv).  */
-#define HAVE_LIBRESOLV 1
-
-/* Define if you have the resolve library (-lresolve).  */
-#undef HAVE_LIBRESOLVE
-
-/* Define if you have the socket library (-lsocket).  */
-#define HAVE_LIBSOCKET 1
-
-/* Define if you have the ssl library (-lssl).  */
-#define HAVE_LIBSSL     1
-
-/* Define if you have the ucb library (-lucb).  */
-#undef HAVE_LIBUCB
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define if getaddrinfo exists and works */
-#define HAVE_GETADDRINFO 1
-
-/* Define if you want to enable IPv6 support */
-#undef ENABLE_IPV6
-
-/* Set to explicitly specify we don't want to use thread-safe functions */
-#undef DISABLED_THREADSAFE
-
-#define HAVE_TIMEVAL_H  1
-
-/* Name of this package! */
-#define PACKAGE "not-used"
-
-/* Version number of this archive. */
-#define VERSION "not-used"
-
-/* Define if you have the getpass function.  */
-#undef HAVE_GETPASS
-
-/* if OpenSSL is in use */
-#define USE_OPENSSL 1
-
-/* if SSL is enabled */
-#define USE_SSLEAY 1
-
-/* Define if you have the `dlopen' function. */
-#undef HAVE_DLOPEN
-
-/* Define if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define if you have the <strings.h> header file. */
-#define HAVE_STRINGS_H 1
-
-/* Define if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define if you have the `strtok_r' function. */
-#undef HAVE_STRTOK_R
-
-/* Define if you have the `strtoll' function. */
-#undef HAVE_STRTOLL
-
-#define HAVE_MEMORY_H   1
-
-#define HAVE_FIONBIO    1
-
-/* Define if you have the `sigsetjmp' function. */
-#define HAVE_SIGSETJMP 1
-
-/* Define to 1 if you have the <setjmp.h> header file. */
-#define HAVE_SETJMP_H 1
-
-/*
- * This needs to be defined for OpenSSL 0.9.7 and other versions that have the
- * ENGINE stuff supported. If an include of "openssl/engine.h" fails, then
- * undefine the define below.
-*/
-#define HAVE_OPENSSL_ENGINE_H 1

lib/config-win32.h

@@ -232,6 +232,12 @@
 /* use ioctlsocket() for non-blocking sockets */
 #define HAVE_IOCTLSOCKET
 
+/* lber dynamic library file */
+/* #undef DL_LBER_FILE */
+
+/* ldap dynamic library file */
+#define DL_LDAP_FILE "wldap32.dll"
+
 /*************************************************
  * This section is for compiler specific defines.*
  *************************************************/

lib/config.dj

@@ -93,6 +93,9 @@
   #define USE_OPENSSL            1
 #endif
 
+/* to disable LDAP */
+#define CURL_DISABLE_LDAP        1
+
 /* Because djgpp <= 2.03 doesn't have snprintf() etc.
  */
 #if (DJGPP_MINOR < 4)

lib/connect.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -98,6 +98,7 @@
 #include "connect.h"
 #include "memory.h"
 #include "select.h"
+#include "url.h" /* for Curl_safefree() */
 
 /* The last #include file should be: */
 #include "memdebug.h"
@@ -363,6 +364,9 @@ static CURLcode bindlocal(struct connectdata *conn,
     return CURLE_OK;
 
   } /* end of device selection support */
+#else
+  (void)conn;
+  (void)sockfd;
 #endif /* end of HAVE_INET_NTOA */
 
   return CURLE_HTTP_PORT_FAILED;
@@ -429,6 +433,25 @@ static bool verifyconnect(curl_socket_t sockfd, int *error)
   return rc;
 }
 
+CURLcode Curl_store_ip_addr(struct connectdata *conn)
+{
+  char addrbuf[256];
+  Curl_printable_address(conn->ip_addr, addrbuf, sizeof(addrbuf));
+
+  /* save the string */
+  Curl_safefree(conn->ip_addr_str);
+  conn->ip_addr_str = strdup(addrbuf);
+  if(!conn->ip_addr_str)
+    return CURLE_OUT_OF_MEMORY; /* FAIL */
+
+#ifdef PF_INET6
+  if(conn->ip_addr->ai_family == PF_INET6)
+    conn->bits.ipv6 = TRUE;
+#endif
+
+  return CURLE_OK;
+}
+
 /* Used within the multi interface. Try next IP address, return TRUE if no
    more address exists */
 static bool trynextip(struct connectdata *conn,
@@ -450,6 +473,8 @@ static bool trynextip(struct connectdata *conn,
       /* store the new socket descriptor */
       conn->sock[sockindex] = sockfd;
       conn->ip_addr = ai;
+
+      Curl_store_ip_addr(conn);
       return FALSE;
     }
     ai = ai->ai_next;
@@ -618,8 +643,10 @@ singleipconnect(struct connectdata *conn,
     /* user selected to bind the outgoing socket to a specified "device"
        before doing connect */
     CURLcode res = bindlocal(conn, sockfd);
-    if(res)
+    if(res) {
+      sclose(sockfd); /* close socket and bail out */
       return res;
+    }
   }
 
   /* set socket non-blocking */
@@ -754,7 +781,7 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
 
   if(data->state.used_interface == Curl_if_multi)
     /* don't hang when doing multi */
-    timeout_per_addr = timeout_ms = 0;
+    timeout_per_addr = 0;
 
   /*
    * Connecting with a Curl_addrinfo chain

lib/connect.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -39,6 +39,8 @@ CURLcode Curl_connecthost(struct connectdata *conn,
 
 int Curl_ourerrno(void);
 
+CURLcode Curl_store_ip_addr(struct connectdata *conn);
+
 #define DEFAULT_CONNECT_TIMEOUT 300000 /* milliseconds == five minutes */
 
 #endif

lib/content_encoding.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -128,7 +128,7 @@ inflate_stream(struct SessionHandle *data,
       }
 
       /* Done with these bytes, exit */
-      if (status == Z_OK && z->avail_in == 0 && z->avail_out > 0) {
+      if (status == Z_OK && z->avail_in == 0) {
         free(decomp);
         return result;
       }

lib/cookie.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -113,6 +113,8 @@ static void freecookie(struct Cookie *co)
     free(co->value);
   if(co->maxage)
     free(co->maxage);
+  if(co->version)
+    free(co->version);
 
   free(co);
 }
@@ -649,6 +651,10 @@ struct CookieInfo *Curl_cookie_init(struct SessionHandle *data,
     fp = stdin;
     fromfile=FALSE;
   }
+  else if(file && !*file) {
+    /* points to a "" string */
+    fp = NULL;
+  }
   else
     fp = file?fopen(file, "r"):NULL;
 

lib/dict.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -85,7 +85,7 @@
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
 
-CURLcode Curl_dict(struct connectdata *conn)
+CURLcode Curl_dict(struct connectdata *conn, bool *done)
 {
   char *word;
   char *ppath;
@@ -100,6 +100,8 @@ CURLcode Curl_dict(struct connectdata *conn)
   char *path = conn->path;
   curl_off_t *bytecount = &conn->bytecount;
 
+  *done = TRUE; /* unconditionally */
+
   if(conn->bits.user_passwd) {
     /* AUTH is missing */
   }
@@ -136,12 +138,12 @@ CURLcode Curl_dict(struct connectdata *conn)
     }
 
     result = Curl_sendf(sockfd, conn,
-                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
+                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\r\n"
                         "MATCH "
                         "%s "    /* database */
                         "%s "    /* strategy */
-                        "%s\n"   /* word */
-                        "QUIT\n",
+                        "%s\r\n" /* word */
+                        "QUIT\r\n",
 
                         database,
                         strategy,
@@ -180,11 +182,11 @@ CURLcode Curl_dict(struct connectdata *conn)
     }
 
     result = Curl_sendf(sockfd, conn,
-                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
+                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\r\n"
                         "DEFINE "
                         "%s "     /* database */
-                        "%s\n"    /* word */
-                        "QUIT\n",
+                        "%s\r\n"  /* word */
+                        "QUIT\r\n",
                         database,
                         word);
     if(result)
@@ -209,9 +211,9 @@ CURLcode Curl_dict(struct connectdata *conn)
           ppath[i] = ' ';
       }
       result = Curl_sendf(sockfd, conn,
-                          "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
-                          "%s\n"
-                          "QUIT\n", ppath);
+                          "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\r\n"
+                          "%s\r\n"
+                          "QUIT\r\n", ppath);
       if(result)
         failf(data, "Failed sending DICT request");
       else

lib/dict.h

@@ -2,18 +2,18 @@
 #define __DICT_H
 
 /***************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
  * are also available at http://curl.haxx.se/docs/copyright.html.
- * 
+ *
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
  * furnished to do so, under the terms of the COPYING file.
@@ -24,7 +24,7 @@
  * $Id$
  ***************************************************************************/
 #ifndef CURL_DISABLE_DICT
-CURLcode Curl_dict(struct connectdata *conn);
+CURLcode Curl_dict(struct connectdata *conn, bool *done);
 CURLcode Curl_dict_done(struct connectdata *conn);
 #endif
 #endif

lib/easy.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -82,6 +82,7 @@
 #include "share.h"
 #include "memory.h"
 #include "progress.h"
+#include "easyif.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
@@ -165,8 +166,8 @@ static void idna_init (void)
 #endif  /* USE_LIBIDN */
 
 /* true globals -- for curl_global_init() and curl_global_cleanup() */
-static unsigned int  initialized = 0;
-static long          init_flags  = 0;
+static unsigned int  initialized;
+static long          init_flags;
 
 /*
  * If a memory-using function (like curl_getenv) is used before
@@ -200,7 +201,8 @@ CURLcode curl_global_init(long flags)
   Curl_ccalloc = (curl_calloc_callback)calloc;
 
   if (flags & CURL_GLOBAL_SSL)
-    Curl_SSL_init();
+    if (!Curl_SSL_init())
+      return CURLE_FAILED_INIT;
 
   if (flags & CURL_GLOBAL_WIN32)
     if (win32_init() != CURLE_OK)
@@ -354,6 +356,89 @@ CURLcode curl_easy_setopt(CURL *curl, CURLoption tag, ...)
   return ret;
 }
 
+#ifdef CURL_MULTIEASY
+/***************************************************************************
+ * This function is still only for testing purposes. It makes a great way
+ * to run the full test suite on the multi interface instead of the easy one.
+ ***************************************************************************
+ *
+ * The *new* curl_easy_perform() is the external interface that performs a
+ * transfer previously setup.
+ *
+ * Wrapper-function that: creates a multi handle, adds the easy handle to it,
+ * runs curl_multi_perform() until the transfer is done, then detaches the
+ * easy handle, destroys the multi handle and returns the easy handle's return
+ * code. This will make everything internally use and assume multi interface.
+ */
+CURLcode curl_easy_perform(CURL *easy)
+{
+  CURLM *multi;
+  CURLMcode mcode;
+  CURLcode code = CURLE_OK;
+  int still_running;
+  struct timeval timeout;
+  int rc;
+  CURLMsg *msg;
+  fd_set fdread;
+  fd_set fdwrite;
+  fd_set fdexcep;
+  int maxfd;
+
+  if(!easy)
+    return CURLE_BAD_FUNCTION_ARGUMENT;
+
+  multi = curl_multi_init();
+  if(!multi)
+    return CURLE_OUT_OF_MEMORY;
+
+  mcode = curl_multi_add_handle(multi, easy);
+  if(mcode) {
+    curl_multi_cleanup(multi);
+    return CURLE_FAILED_INIT;
+  }
+
+  /* we start some action by calling perform right away */
+
+  do {
+    while(CURLM_CALL_MULTI_PERFORM ==
+          curl_multi_perform(multi, &still_running));
+
+    if(!still_running)
+      break;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* timeout once per second */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    if(rc == -1)
+      /* select error */
+      break;
+
+    /* timeout or data to send/receive => loop! */
+  } while(still_running);
+
+  msg = curl_multi_info_read(multi, &rc);
+  if(msg)
+    code = msg->data.result;
+
+  mcode = curl_multi_remove_handle(multi, easy);
+  /* what to do if it fails? */
+
+  mcode = curl_multi_cleanup(multi);
+  /* what to do if it fails? */
+
+  return code;
+}
+#else
 /*
  * curl_easy_perform() is the external interface that performs a transfer
  * previously setup.
@@ -388,6 +473,7 @@ CURLcode curl_easy_perform(CURL *curl)
 
   return Curl_perform(data);
 }
+#endif
 
 /*
  * curl_easy_cleanup() is the external interface to cleaning/freeing the given
@@ -403,6 +489,15 @@ void curl_easy_cleanup(CURL *curl)
   Curl_close(data);
 }
 
+/*
+ * Store a pointed to the multi handle within the easy handle's data struct.
+ */
+void Curl_easy_addmulti(struct SessionHandle *data,
+                        void *multi)
+{
+  data->multi = multi;
+}
+
 /*
  * curl_easy_getinfo() is an external interface that allows an app to retrieve
  * information from a performed transfer and similar.

lib/easyif.h

@@ -0,0 +1,31 @@
+#ifndef __EASYIF_H
+#define __EASYIF_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ ***************************************************************************/
+
+/*
+ * Prototypes for library-wide functions provided by easy.c
+ */
+void Curl_easy_addmulti(struct SessionHandle *data, void *multi);
+
+#endif /* __EASYIF_H */

lib/file.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -87,6 +87,7 @@
 #include "transfer.h"
 #include "url.h"
 #include "memory.h"
+#include "parsedate.h" /* for the week day and month names */
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
@@ -266,7 +267,7 @@ static CURLcode file_upload(struct connectdata *conn)
  * opposed to sockets) we instead perform the whole do-operation in this
  * function.
  */
-CURLcode Curl_file(struct connectdata *conn)
+CURLcode Curl_file(struct connectdata *conn, bool *done)
 {
   /* This implementation ignores the host name in conformance with
      RFC 1738. Only local files (reachable via the standard file system)
@@ -286,6 +287,8 @@ CURLcode Curl_file(struct connectdata *conn)
   int fd;
   struct timeval now = Curl_tvnow();
 
+  *done = TRUE; /* unconditionally */
+
   Curl_readwrite_init(conn);
   Curl_initinfo(data);
   Curl_pgrsStartNow(data);
@@ -319,7 +322,6 @@ CURLcode Curl_file(struct connectdata *conn)
     if(result)
       return result;
 
-#ifdef HAVE_STRFTIME
     if(fstated) {
       struct tm *tm;
       time_t clock = (time_t)statbuf.st_mtime;
@@ -330,11 +332,17 @@ CURLcode Curl_file(struct connectdata *conn)
       tm = gmtime(&clock);
 #endif
       /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */
-      strftime(buf, BUFSIZE-1, "Last-Modified: %a, %d %b %Y %H:%M:%S GMT\r\n",
-               tm);
+      snprintf(buf, BUFSIZE-1,
+               "Last-Modified: %s, %02d %s %4d %02d:%02d:%02d GMT\r\n",
+               Curl_wkday[tm->tm_wday?tm->tm_wday-1:6],
+               tm->tm_mday,
+               Curl_month[tm->tm_mon],
+               tm->tm_year + 1900,
+               tm->tm_hour,
+               tm->tm_min,
+               tm->tm_sec);
       result = Curl_client_write(data, CLIENTWRITE_BOTH, buf, 0);
     }
-#endif
     return result;
   }
 

lib/file.h

@@ -2,18 +2,18 @@
 #define __FILE_H
 
 /***************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
  * are also available at http://curl.haxx.se/docs/copyright.html.
- * 
+ *
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
  * furnished to do so, under the terms of the COPYING file.
@@ -24,7 +24,7 @@
  * $Id$
  ***************************************************************************/
 #ifndef CURL_DISABLE_FILE
-CURLcode Curl_file(struct connectdata *);
+CURLcode Curl_file(struct connectdata *, bool *done);
 CURLcode Curl_file_done(struct connectdata *, CURLcode);
 CURLcode Curl_file_connect(struct connectdata *);
 #endif

lib/formdata.c

@@ -1539,7 +1539,7 @@ void curl_formfree(struct curl_httppost *form)
 char *Curl_FormBoundary(void)
 {
   char *retstring;
-  static int randomizer=0; /* this is just so that two boundaries within
+  static int randomizer;   /* this is just so that two boundaries within
                               the same form won't be identical */
   size_t i;
 

lib/ftp.h

@@ -1,18 +1,18 @@
 #ifndef __FTP_H
 #define __FTP_H
 /***************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
  * are also available at http://curl.haxx.se/docs/copyright.html.
- * 
+ *
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
  * furnished to do so, under the terms of the COPYING file.
@@ -24,14 +24,21 @@
  ***************************************************************************/
 
 #ifndef CURL_DISABLE_FTP
-CURLcode Curl_ftp(struct connectdata *conn);
+CURLcode Curl_ftp(struct connectdata *conn, bool *done);
 CURLcode Curl_ftp_done(struct connectdata *conn, CURLcode);
-CURLcode Curl_ftp_connect(struct connectdata *conn);
+CURLcode Curl_ftp_connect(struct connectdata *conn, bool *done);
 CURLcode Curl_ftp_disconnect(struct connectdata *conn);
 CURLcode Curl_ftpsendf(struct connectdata *, const char *fmt, ...);
+CURLcode Curl_nbftpsendf(struct connectdata *, const char *fmt, ...);
 CURLcode Curl_GetFTPResponse(ssize_t *nread, struct connectdata *conn,
                              int *ftpcode);
 CURLcode Curl_ftp_nextconnect(struct connectdata *conn);
-#endif
-
-#endif
+CURLcode Curl_ftp_multi_statemach(struct connectdata *conn, bool *done);
+CURLcode Curl_ftp_fdset(struct connectdata *conn,
+                        fd_set *read_fd_set,
+                        fd_set *write_fd_set,
+                        int *max_fdp);
+CURLcode Curl_ftp_doing(struct connectdata *conn,
+                        bool *dophase_done);
+#endif /* CURL_DISABLE_FTP */
+#endif /* __FTP_H */

lib/hash.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -50,12 +50,11 @@ hash_str(const char *key, size_t key_length)
 static void
 hash_element_dtor(void *user, void *element)
 {
-  curl_hash         *h = (curl_hash *) user;
-  curl_hash_element *e = (curl_hash_element *) element;
+  struct curl_hash *h = (struct curl_hash *) user;
+  struct curl_hash_element *e = (struct curl_hash_element *) element;
 
-  if (e->key) {
+  if (e->key)
     free(e->key);
-  }
 
   h->dtor(e->ptr);
 
@@ -64,7 +63,7 @@ hash_element_dtor(void *user, void *element)
 
 /* return 1 on error, 0 is fine */
 int
-Curl_hash_init(curl_hash *h, int slots, curl_hash_dtor dtor)
+Curl_hash_init(struct curl_hash *h, int slots, curl_hash_dtor dtor)
 {
   int i;
 
@@ -72,7 +71,7 @@ Curl_hash_init(curl_hash *h, int slots, curl_hash_dtor dtor)
   h->size = 0;
   h->slots = slots;
 
-  h->table = (curl_llist **) malloc(slots * sizeof(curl_llist *));
+  h->table = (struct curl_llist **) malloc(slots * sizeof(struct curl_llist *));
   if(h->table) {
     for (i = 0; i < slots; ++i) {
       h->table[i] = Curl_llist_alloc((curl_llist_dtor) hash_element_dtor);
@@ -89,12 +88,12 @@ Curl_hash_init(curl_hash *h, int slots, curl_hash_dtor dtor)
     return 1; /* failure */
 }
 
-curl_hash *
+struct curl_hash *
 Curl_hash_alloc(int slots, curl_hash_dtor dtor)
 {
-  curl_hash *h;
+  struct curl_hash *h;
 
-  h = (curl_hash *) malloc(sizeof(curl_hash));
+  h = (struct curl_hash *) malloc(sizeof(struct curl_hash));
   if (h) {
     if(Curl_hash_init(h, slots, dtor)) {
       /* failure */
@@ -118,11 +117,11 @@ hash_key_compare(char *key1, size_t key1_len, char *key2, size_t key2_len)
   return 0;
 }
 
-static curl_hash_element *
+static struct curl_hash_element *
 mk_hash_element(char *key, size_t key_len, const void *p)
 {
-  curl_hash_element *he =
-    (curl_hash_element *) malloc(sizeof(curl_hash_element));
+  struct curl_hash_element *he =
+    (struct curl_hash_element *) malloc(sizeof(struct curl_hash_element));
 
   if(he) {
     char *dup = strdup(key);
@@ -147,14 +146,14 @@ mk_hash_element(char *key, size_t key_len, const void *p)
 /* Return the data in the hash. If there already was a match in the hash,
    that data is returned. */
 void *
-Curl_hash_add(curl_hash *h, char *key, size_t key_len, void *p)
+Curl_hash_add(struct curl_hash *h, char *key, size_t key_len, void *p)
 {
-  curl_hash_element  *he;
-  curl_llist_element *le;
-  curl_llist *l = FETCH_LIST(h, key, key_len);
+  struct curl_hash_element  *he;
+  struct curl_llist_element *le;
+  struct curl_llist *l = FETCH_LIST(h, key, key_len);
 
   for (le = l->head; le; le = le->next) {
-    he = (curl_hash_element *) le->ptr;
+    he = (struct curl_hash_element *) le->ptr;
     if (hash_key_compare(he->key, he->key_len, key, key_len)) {
       h->dtor(p);     /* remove the NEW entry */
       return he->ptr; /* return the EXISTING entry */
@@ -181,11 +180,11 @@ Curl_hash_add(curl_hash *h, char *key, size_t key_len, void *p)
 }
 
 void *
-Curl_hash_pick(curl_hash *h, char *key, size_t key_len)
+Curl_hash_pick(struct curl_hash *h, char *key, size_t key_len)
 {
-  curl_llist_element *le;
-  curl_hash_element  *he;
-  curl_llist *l = FETCH_LIST(h, key, key_len);
+  struct curl_llist_element *le;
+  struct curl_hash_element  *he;
+  struct curl_llist *l = FETCH_LIST(h, key, key_len);
 
   for (le = l->head;
        le;
@@ -204,7 +203,7 @@ void
 Curl_hash_apply(curl_hash *h, void *user,
                 void (*cb)(void *user, void *ptr))
 {
-  curl_llist_element  *le;
+  struct curl_llist_element  *le;
   int                  i;
 
   for (i = 0; i < h->slots; ++i) {
@@ -219,7 +218,7 @@ Curl_hash_apply(curl_hash *h, void *user,
 #endif
 
 void
-Curl_hash_clean(curl_hash *h)
+Curl_hash_clean(struct curl_hash *h)
 {
   int i;
 
@@ -231,19 +230,19 @@ Curl_hash_clean(curl_hash *h)
 }
 
 void
-Curl_hash_clean_with_criterium(curl_hash *h, void *user,
+Curl_hash_clean_with_criterium(struct curl_hash *h, void *user,
                                int (*comp)(void *, void *))
 {
-  curl_llist_element *le;
-  curl_llist_element *lnext;
-  curl_llist *list;
+  struct curl_llist_element *le;
+  struct curl_llist_element *lnext;
+  struct curl_llist *list;
   int i;
 
   for (i = 0; i < h->slots; ++i) {
     list = h->table[i];
     le = list->head; /* get first list entry */
     while(le) {
-      curl_hash_element *he = le->ptr;
+      struct curl_hash_element *he = le->ptr;
       lnext = le->next;
       /* ask the callback function if we shall remove this entry or not */
       if (comp(user, he->ptr)) {
@@ -256,7 +255,7 @@ Curl_hash_clean_with_criterium(curl_hash *h, void *user,
 }
 
 void
-Curl_hash_destroy(curl_hash *h)
+Curl_hash_destroy(struct curl_hash *h)
 {
   if (!h)
     return;

lib/hash.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -31,30 +31,31 @@
 
 typedef void (*curl_hash_dtor)(void *);
 
-typedef struct _curl_hash {
-  curl_llist     **table;
+struct curl_hash {
+  struct curl_llist **table;
   curl_hash_dtor   dtor;
-  int              slots;
-  size_t           size;
-} curl_hash;
+  int slots;
+  size_t size;
+};
 
-typedef struct _curl_hash_element {
+struct curl_hash_element {
   void   *ptr;
   char   *key;
   size_t key_len;
-} curl_hash_element;
+};
 
 
-int Curl_hash_init(curl_hash *, int, curl_hash_dtor);
-curl_hash *Curl_hash_alloc(int, curl_hash_dtor);
-void *Curl_hash_add(curl_hash *, char *, size_t, void *);
-int Curl_hash_delete(curl_hash *h, char *key, size_t key_len);
-void *Curl_hash_pick(curl_hash *, char *, size_t);
-void Curl_hash_apply(curl_hash *h, void *user,
+int Curl_hash_init(struct curl_hash *, int, curl_hash_dtor);
+struct curl_hash *Curl_hash_alloc(int, curl_hash_dtor);
+void *Curl_hash_add(struct curl_hash *, char *, size_t, void *);
+int Curl_hash_delete(struct curl_hash *h, char *key, size_t key_len);
+void *Curl_hash_pick(struct curl_hash *, char *, size_t);
+void Curl_hash_apply(struct curl_hash *h, void *user,
                      void (*cb)(void *user, void *ptr));
-int Curl_hash_count(curl_hash *h);
-void Curl_hash_clean(curl_hash *h);
-void Curl_hash_clean_with_criterium(curl_hash *h, void *user, int (*comp)(void *, void *));
-void Curl_hash_destroy(curl_hash *h);
+int Curl_hash_count(struct curl_hash *h);
+void Curl_hash_clean(struct curl_hash *h);
+void Curl_hash_clean_with_criterium(struct curl_hash *h, void *user,
+                                    int (*comp)(void *, void *));
+void Curl_hash_destroy(struct curl_hash *h);
 
 #endif

lib/hostares.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -99,7 +99,7 @@
 #ifdef CURLRES_ARES
 
 /*
- * Curl_fdset() is called when someone from the outside world (using
+ * Curl_resolv_fdset() is called when someone from the outside world (using
  * curl_multi_fdset()) wants to get our fd_set setup and we're talking with
  * ares. The caller must make sure that this function is only called when we
  * have a working ares channel.
@@ -107,10 +107,10 @@
  * Returns: CURLE_OK always!
  */
 
-CURLcode Curl_fdset(struct connectdata *conn,
-                    fd_set *read_fd_set,
-                    fd_set *write_fd_set,
-                    int *max_fdp)
+CURLcode Curl_resolv_fdset(struct connectdata *conn,
+                           fd_set *read_fd_set,
+                           fd_set *write_fd_set,
+                           int *max_fdp)
 
 {
   int max = ares_fds(conn->data->state.areschannel,
@@ -249,7 +249,7 @@ CURLcode Curl_wait_for_resolv(struct connectdata *conn,
 
     /* close the connection, since we can't return failure here without
        cleaning up this connection properly */
-    Curl_disconnect(conn);
+    conn->bits.close = TRUE;
   }
 
   return rc;
@@ -291,7 +291,7 @@ Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
 
     /* areschannel is already setup in the Curl_open() function */
     ares_gethostbyname(data->state.areschannel, hostname, PF_INET,
-                       Curl_addrinfo4_callback, conn);
+                       (ares_host_callback)Curl_addrinfo4_callback, conn);
 
     *waitp = TRUE; /* please wait for the response */
   }

lib/hostasyn.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -67,11 +67,6 @@
 #include <process.h>
 #endif
 
-#if (defined(NETWARE) && defined(__NOVELL_LIBC__))
-#undef in_addr_t
-#define in_addr_t unsigned long
-#endif
-
 #include "urldata.h"
 #include "sendf.h"
 #include "hostip.h"
@@ -108,12 +103,13 @@
  *
  * The storage operation locks and unlocks the DNS cache.
  */
-static void addrinfo_callback(void *arg, /* "struct connectdata *" */
-                              int status,
-                              void *addr)
+static CURLcode addrinfo_callback(void *arg, /* "struct connectdata *" */
+                                  int status,
+                                  void *addr)
 {
   struct connectdata *conn = (struct connectdata *)arg;
   struct Curl_dns_entry *dns = NULL;
+  CURLcode rc = CURLE_OK;
 
   conn->async.status = status;
 
@@ -135,13 +131,17 @@ static void addrinfo_callback(void *arg, /* "struct connectdata *" */
       dns = Curl_cache_addr(data, ai,
                             conn->async.hostname,
                             conn->async.port);
-      if(!dns)
+      if(!dns) {
         /* failed to store, cleanup and return error */
         Curl_freeaddrinfo(ai);
+        rc = CURLE_OUT_OF_MEMORY;
+      }
 
       if(data->share)
         Curl_share_unlock(data, CURL_LOCK_DATA_DNS);
     }
+    else
+      rc = CURLE_OUT_OF_MEMORY;
   }
 
   conn->async.dns = dns;
@@ -153,21 +153,22 @@ static void addrinfo_callback(void *arg, /* "struct connectdata *" */
 
   /* ipv4: The input hostent struct will be freed by ares when we return from
      this function */
+  return rc;
 }
 
-void Curl_addrinfo4_callback(void *arg, /* "struct connectdata *" */
-                             int status,
-                             struct hostent *hostent)
+CURLcode Curl_addrinfo4_callback(void *arg, /* "struct connectdata *" */
+                                 int status,
+                                 struct hostent *hostent)
 {
-  addrinfo_callback(arg, status, hostent);
+  return addrinfo_callback(arg, status, hostent);
 }
 
 #ifdef CURLRES_IPV6
-void Curl_addrinfo6_callback(void *arg, /* "struct connectdata *" */
-                             int status,
-                             struct addrinfo *ai)
+CURLcode Curl_addrinfo6_callback(void *arg, /* "struct connectdata *" */
+                                 int status,
+                                 struct addrinfo *ai)
 {
-  addrinfo_callback(arg, status, ai);
+  return addrinfo_callback(arg, status, ai);
 }
 #endif
 

lib/hostip.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -67,11 +67,6 @@
 #include <process.h>
 #endif
 
-#if (defined(NETWARE) && defined(__NOVELL_LIBC__))
-#undef in_addr_t
-#define in_addr_t unsigned long
-#endif
-
 #include "urldata.h"
 #include "sendf.h"
 #include "hostip.h"
@@ -131,7 +126,7 @@
  */
 
 /* These two symbols are for the global DNS cache */
-static curl_hash hostname_cache;
+static struct curl_hash hostname_cache;
 static int host_cache_initialized;
 
 static void freednsentry(void *freethis);
@@ -152,7 +147,7 @@ void Curl_global_host_cache_init(void)
 /*
  * Return a pointer to the global cache
  */
-curl_hash *Curl_global_host_cache_get(void)
+struct curl_hash *Curl_global_host_cache_get(void)
 {
   return &hostname_cache;
 }
@@ -244,7 +239,7 @@ hostcache_timestamp_remove(void *datap, void *hc)
  * Prune the DNS cache. This assumes that a lock has already been taken.
  */
 static void
-hostcache_prune(curl_hash *hostcache, int cache_timeout, time_t now)
+hostcache_prune(struct curl_hash *hostcache, int cache_timeout, time_t now)
 {
   struct hostcache_prune_data user;
 
@@ -507,7 +502,7 @@ static void freednsentry(void *freethis)
 /*
  * Curl_mk_dnscache() creates a new DNS cache and returns the handle for it.
  */
-curl_hash *Curl_mk_dnscache(void)
+struct curl_hash *Curl_mk_dnscache(void)
 {
   return Curl_hash_alloc(7, freednsentry);
 }

lib/hostip.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -112,7 +112,7 @@ struct connectdata;
 
 void Curl_global_host_cache_init(void);
 void Curl_global_host_cache_dtor(void);
-curl_hash *Curl_global_host_cache_get(void);
+struct curl_hash *Curl_global_host_cache_get(void);
 
 #define Curl_global_host_cache_use(__p) ((__p)->set.global_dns_cache)
 
@@ -159,13 +159,13 @@ CURLcode Curl_is_resolved(struct connectdata *conn,
 CURLcode Curl_wait_for_resolv(struct connectdata *conn,
                               struct Curl_dns_entry **dnsentry);
 
-/* Curl_fdset() is a generic function that exists in multiple versions
+/* Curl_resolv_fdset() is a generic function that exists in multiple versions
    depending on what name resolve technology we've built to use. The function
    is called from the curl_multi_fdset() function */
-CURLcode Curl_fdset(struct connectdata *conn,
-                    fd_set *read_fd_set,
-                    fd_set *write_fd_set,
-                    int *max_fdp);
+CURLcode Curl_resolv_fdset(struct connectdata *conn,
+                           fd_set *read_fd_set,
+                           fd_set *write_fd_set,
+                           int *max_fdp);
 /* unlock a previously resolved dns entry */
 void Curl_resolv_unlock(struct SessionHandle *data, struct Curl_dns_entry *dns);
 
@@ -176,7 +176,7 @@ void Curl_scan_cache_used(void *user, void *ptr);
 void Curl_freeaddrinfo(Curl_addrinfo *freeaddr);
 
 /* make a new dns cache and return the handle */
-curl_hash *Curl_mk_dnscache(void);
+struct curl_hash *Curl_mk_dnscache(void);
 
 /* prune old entries from the DNS cache */
 void Curl_hostcache_prune(struct SessionHandle *data);
@@ -199,14 +199,14 @@ int curl_dogetnameinfo(const struct sockaddr *sa, socklen_t salen,
 
 /* This is the callback function that is used when we build with asynch
    resolve, ipv4 */
-void Curl_addrinfo4_callback(void *arg,
-                            int status,
-                            struct hostent *hostent);
+CURLcode Curl_addrinfo4_callback(void *arg,
+                                 int status,
+                                 struct hostent *hostent);
 /* This is the callback function that is used when we build with asynch
    resolve, ipv6 */
-void Curl_addrinfo6_callback(void *arg,
-                            int status,
-                            struct addrinfo *ai);
+CURLcode Curl_addrinfo6_callback(void *arg,
+                                 int status,
+                                 struct addrinfo *ai);
 
 
 /* [ipv4 only] Creates a Curl_addrinfo struct from a numerical-only IP
@@ -240,6 +240,13 @@ struct Curl_dns_entry *
 Curl_cache_addr(struct SessionHandle *data, Curl_addrinfo *addr,
                 char *hostname, int port);
 
+/*
+ * Curl_destroy_thread_data() cleans up async resolver data.
+ * Complementary of ares_destroy.
+ */
+struct Curl_async; /* forward-declaration */
+void Curl_destroy_thread_data(struct Curl_async *async);
+
 #ifndef INADDR_NONE
 #define CURL_INADDR_NONE (in_addr_t) ~0
 #else

lib/hostip4.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -79,6 +79,7 @@
 #include "share.h"
 #include "strerror.h"
 #include "url.h"
+#include "inet_pton.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
@@ -202,11 +203,9 @@ Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
 
   *waitp = 0; /* don't wait, we act synchronously */
 
-  in=inet_addr(hostname);
-  if (in != CURL_INADDR_NONE) {
+  if(1 == Curl_inet_pton(AF_INET, hostname, &in))
     /* This is a dotted IP address 123.123.123.123-style */
     return Curl_ip2addr(in, hostname, port);
-  }
 
 #if defined(HAVE_GETHOSTBYNAME_R)
   /*

lib/hostip6.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -67,11 +67,6 @@
 #include <process.h>
 #endif
 
-#if (defined(NETWARE) && defined(__NOVELL_LIBC__))
-#undef in_addr_t
-#define in_addr_t unsigned long
-#endif
-
 #include "urldata.h"
 #include "sendf.h"
 #include "hostip.h"
@@ -79,6 +74,7 @@
 #include "share.h"
 #include "strerror.h"
 #include "url.h"
+#include "inet_pton.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
@@ -247,8 +243,8 @@ Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
     }
   }
 
-  if((1 == inet_pton(AF_INET, hostname, addrbuf)) ||
-     (1 == inet_pton(AF_INET6, hostname, addrbuf))) {
+  if((1 == Curl_inet_pton(AF_INET, hostname, addrbuf)) ||
+     (1 == Curl_inet_pton(AF_INET6, hostname, addrbuf))) {
     /* the given address is numerical only, prevent a reverse lookup */
     ai_flags = AI_NUMERICHOST;
   }

lib/hostsyn.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -67,11 +67,6 @@
 #include <process.h>
 #endif
 
-#if (defined(NETWARE) && defined(__NOVELL_LIBC__))
-#undef in_addr_t
-#define in_addr_t unsigned long
-#endif
-
 #include "urldata.h"
 #include "sendf.h"
 #include "hostip.h"
@@ -133,10 +128,10 @@ CURLcode Curl_is_resolved(struct connectdata *conn,
  * It is present here to keep #ifdefs out from multi.c
  */
 
-CURLcode Curl_fdset(struct connectdata *conn,
-                    fd_set *read_fd_set,
-                    fd_set *write_fd_set,
-                    int *max_fdp)
+CURLcode Curl_resolv_fdset(struct connectdata *conn,
+                           fd_set *read_fd_set,
+                           fd_set *write_fd_set,
+                           int *max_fdp)
 {
   (void)conn;
   (void)read_fd_set;

lib/hostthre.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -155,7 +155,7 @@ struct thread_data {
   HANDLE thread_hnd;
   unsigned thread_id;
   DWORD  thread_status;
-  curl_socket_t dummy_sock;   /* dummy for Curl_fdset() */
+  curl_socket_t dummy_sock;   /* dummy for Curl_resolv_fdset() */
   FILE *stderr_file;
   HANDLE mutex_waiting;  /* marks that we are still waiting for a resolve */
   HANDLE event_resolved; /* marks that the thread obtained the information */
@@ -184,11 +184,13 @@ static unsigned __stdcall gethostbyname_thread (void *arg)
    * due to a resolver timeout.
    */
   HANDLE mutex_waiting = NULL;
-  if (!DuplicateHandle(GetCurrentProcess(), td->mutex_waiting,
-                       GetCurrentProcess(), &mutex_waiting, 0, FALSE,
+  HANDLE curr_proc = GetCurrentProcess();
+
+  if (!DuplicateHandle(curr_proc, td->mutex_waiting,
+                       curr_proc, &mutex_waiting, 0, FALSE,
                        DUPLICATE_SAME_ACCESS)) {
     /* failed to duplicate the mutex, no point in continuing */
-    return 0;
+    return -1;
   }
 
   /* Sharing the same _iob[] element with our parent thread should
@@ -212,12 +214,10 @@ static unsigned __stdcall gethostbyname_thread (void *arg)
     SetEvent(td->event_resolved);
 
     if (he) {
-      Curl_addrinfo4_callback(conn, CURL_ASYNC_SUCCESS, he);
-      rc = 1;
+      rc = Curl_addrinfo4_callback(conn, CURL_ASYNC_SUCCESS, he);
     }
     else {
-      Curl_addrinfo4_callback(conn, (int)WSAGetLastError(), NULL);
-      rc = 0;
+      rc = Curl_addrinfo4_callback(conn, (int)WSAGetLastError(), NULL);
     }
     TRACE(("Winsock-error %d, addr %s\n", conn->async.status,
            he ? inet_ntoa(*(struct in_addr*)he->h_addr) : "unknown"));
@@ -252,14 +252,18 @@ static unsigned __stdcall getaddrinfo_thread (void *arg)
    * due to a resolver timeout.
    */
   HANDLE mutex_waiting = NULL;
-  if (!DuplicateHandle(GetCurrentProcess(), td->mutex_waiting,
-                       GetCurrentProcess(), &mutex_waiting, 0, FALSE,
+  HANDLE curr_proc = GetCurrentProcess();
+
+  if (!DuplicateHandle(curr_proc, td->mutex_waiting,
+                       curr_proc, &mutex_waiting, 0, FALSE,
                        DUPLICATE_SAME_ACCESS)) {
     /* failed to duplicate the mutex, no point in continuing */
-    return 0;
+    return -1;
   }
 
+#ifndef _WIN32_WCE
   *stderr = *td->stderr_file;
+#endif
 
   itoa(conn->async.port, service, 10);
 
@@ -280,10 +284,10 @@ static unsigned __stdcall getaddrinfo_thread (void *arg)
 #ifdef DEBUG_THREADING_GETADDRINFO
       dump_addrinfo (conn, res);
 #endif
-      Curl_addrinfo6_callback(conn, CURL_ASYNC_SUCCESS, res);
+      rc = Curl_addrinfo6_callback(conn, CURL_ASYNC_SUCCESS, res);
     }
     else {
-      Curl_addrinfo6_callback(conn, (int)WSAGetLastError(), NULL);
+      rc = Curl_addrinfo6_callback(conn, (int)WSAGetLastError(), NULL);
       TRACE(("Winsock-error %d, no address\n", conn->async.status));
     }
   }
@@ -297,10 +301,10 @@ static unsigned __stdcall getaddrinfo_thread (void *arg)
 #endif
 
 /*
- * destroy_thread_data() cleans up async resolver data.
+ * Curl_destroy_thread_data() cleans up async resolver data.
  * Complementary of ares_destroy.
  */
-static void destroy_thread_data (struct Curl_async *async)
+void Curl_destroy_thread_data (struct Curl_async *async)
 {
   if (async->hostname)
     free(async->hostname);
@@ -315,6 +319,7 @@ static void destroy_thread_data (struct Curl_async *async)
     /* destroy the synchronization objects */
     if (td->mutex_waiting)
       CloseHandle(td->mutex_waiting);
+    td->mutex_waiting = NULL;
     if (td->event_resolved)
       CloseHandle(td->event_resolved);
 
@@ -361,7 +366,7 @@ static bool init_resolve_thread (struct connectdata *conn,
    */
   td->mutex_waiting = CreateMutex(NULL, TRUE, NULL);
   if (td->mutex_waiting == NULL) {
-    destroy_thread_data(&conn->async);
+    Curl_destroy_thread_data(&conn->async);
     SetLastError(EAGAIN);
     return FALSE;
   }
@@ -371,7 +376,7 @@ static bool init_resolve_thread (struct connectdata *conn,
    */
   td->event_resolved = CreateEvent(NULL, TRUE, FALSE, NULL);
   if (td->event_resolved == NULL) {
-    destroy_thread_data(&conn->async);
+    Curl_destroy_thread_data(&conn->async);
     SetLastError(EAGAIN);
     return FALSE;
   }
@@ -383,7 +388,6 @@ static bool init_resolve_thread (struct connectdata *conn,
                                          (LPTHREAD_START_ROUTINE) THREAD_FUNC,
                                          conn, 0, &td->thread_id);
 #else
-
   td->thread_hnd = (HANDLE) _beginthreadex(NULL, 0, THREAD_FUNC,
                                            conn, 0, &td->thread_id);
 #endif
@@ -398,12 +402,12 @@ static bool init_resolve_thread (struct connectdata *conn,
   if (!td->thread_hnd) {
      SetLastError(errno);
      TRACE(("_beginthreadex() failed; %s\n", Curl_strerror(conn,errno)));
-     destroy_thread_data(&conn->async);
+     Curl_destroy_thread_data(&conn->async);
      return FALSE;
   }
-  /* This socket is only to keep Curl_fdset() and select() happy; should never
-   * become signalled for read/write since it's unbound but Windows needs
-   * atleast 1 socket in select().
+  /* This socket is only to keep Curl_resolv_fdset() and select() happy;
+   * should never become signalled for read/write since it's unbound but
+   * Windows needs atleast 1 socket in select().
    */
   td->dummy_sock = socket(AF_INET, SOCK_DGRAM, 0);
   return TRUE;
@@ -488,7 +492,11 @@ CURLcode Curl_wait_for_resolv(struct connectdata *conn,
 
   if (!conn->async.dns) {
     /* a name was not resolved */
-    if (td->thread_status == (DWORD)-1 || conn->async.status == NO_DATA) {
+    if (td->thread_status == CURLE_OUT_OF_MEMORY) {
+      rc = CURLE_OUT_OF_MEMORY;
+      failf(data, "Could not resolve host: %s", curl_easy_strerror(rc));
+    }
+    else if (td->thread_status == (DWORD)-1 || conn->async.status == NO_DATA) {
       failf(data, "Resolving host timed out: %s", conn->host.name);
       rc = CURLE_OPERATION_TIMEDOUT;
     }
@@ -501,12 +509,10 @@ CURLcode Curl_wait_for_resolv(struct connectdata *conn,
       rc = CURLE_OPERATION_TIMEDOUT;
   }
 
-  destroy_thread_data(&conn->async);
+  Curl_destroy_thread_data(&conn->async);
 
-  if(CURLE_OK != rc)
-    /* close the connection, since we must not return failure from here
-       without cleaning up this connection properly */
-    Curl_disconnect(conn);
+  if(!conn->async.dns)
+    conn->bits.close = TRUE;
 
   return (rc);
 }
@@ -523,7 +529,7 @@ CURLcode Curl_is_resolved(struct connectdata *conn,
 
   if (conn->async.done) {
     /* we're done */
-    destroy_thread_data(&conn->async);
+    Curl_destroy_thread_data(&conn->async);
     if (!conn->async.dns) {
       TRACE(("Curl_is_resolved(): CURLE_COULDNT_RESOLVE_HOST\n"));
       return CURLE_COULDNT_RESOLVE_HOST;
@@ -531,15 +537,13 @@ CURLcode Curl_is_resolved(struct connectdata *conn,
     *entry = conn->async.dns;
     TRACE(("resolved okay, dns %p\n", *entry));
   }
-  else
-    TRACE(("not yet\n"));
   return CURLE_OK;
 }
 
-CURLcode Curl_fdset(struct connectdata *conn,
-                    fd_set *read_fd_set,
-                    fd_set *write_fd_set,
-                    int *max_fdp)
+CURLcode Curl_resolv_fdset(struct connectdata *conn,
+                           fd_set *read_fd_set,
+                           fd_set *write_fd_set,
+                           int *max_fdp)
 {
   const struct thread_data *td =
     (const struct thread_data *) conn->async.os_specific;

lib/http.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -95,6 +95,7 @@
 #include "http.h"
 #include "memory.h"
 #include "select.h"
+#include "parsedate.h" /* for the week day and month names */
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
@@ -229,42 +230,58 @@ static CURLcode perhapsrewind(struct connectdata *conn)
 
   bytessent = http->writebytecount;
 
-  /* figure out how much data we are expected to send */
-  switch(data->set.httpreq) {
-  case HTTPREQ_POST:
-    if(data->set.postfieldsize != -1)
-      expectsend = data->set.postfieldsize;
-    break;
-  case HTTPREQ_PUT:
-    if(data->set.infilesize != -1)
-      expectsend = data->set.infilesize;
-    break;
-  case HTTPREQ_POST_FORM:
-    expectsend = http->postsize;
-    break;
-  default:
-    break;
+  if(conn->bits.authneg)
+    /* This is a state where we are known to be negotiating and we don't send
+       any data then. */
+    expectsend = 0;
+  else {
+    /* figure out how much data we are expected to send */
+    switch(data->set.httpreq) {
+    case HTTPREQ_POST:
+      if(data->set.postfieldsize != -1)
+        expectsend = data->set.postfieldsize;
+      break;
+    case HTTPREQ_PUT:
+      if(data->set.infilesize != -1)
+        expectsend = data->set.infilesize;
+      break;
+    case HTTPREQ_POST_FORM:
+      expectsend = http->postsize;
+      break;
+    default:
+      break;
+    }
   }
 
   conn->bits.rewindaftersend = FALSE; /* default */
 
   if((expectsend == -1) || (expectsend > bytessent)) {
     /* There is still data left to send */
-    if((data->state.authproxy.picked == CURLAUTH_NTLM) ||/* using NTLM */
-       (data->state.authhost.picked == CURLAUTH_NTLM) ) {
-      conn->bits.close = FALSE; /* don't close, keep on sending */
+    if((data->state.authproxy.picked == CURLAUTH_NTLM) ||
+       (data->state.authhost.picked == CURLAUTH_NTLM)) {
+      if(((expectsend - bytessent) < 2000) ||
+         (conn->ntlm.state != NTLMSTATE_NONE)) {
+        /* The NTLM-negotiation has started *OR* there is just a little (<2K)
+           data left to send, keep on sending. */
 
-      /* rewind data when completely done sending! */
-      conn->bits.rewindaftersend = TRUE;
-      return CURLE_OK;
-    }
-    else {
-      /* If there is more than just a little data left to send, close the
-       * current connection by force.
-       */
-      conn->bits.close = TRUE;
-      conn->size = 0; /* don't download any more than 0 bytes */
+        /* rewind data when completely done sending! */
+        if(!conn->bits.authneg)
+          conn->bits.rewindaftersend = TRUE;
+
+        return CURLE_OK;
+      }
+      if(conn->bits.close)
+        /* this is already marked to get closed */
+        return CURLE_OK;
+
+      infof(data, "NTLM send, close instead of sending %ld bytes\n",
+            expectsend - bytessent);
     }
+
+    /* This is not NTLM or NTLM with many bytes left to send: close
+     */
+    conn->bits.close = TRUE;
+    conn->size = 0; /* don't download any more than 0 bytes */
   }
 
   if(bytessent)
@@ -287,6 +304,10 @@ CURLcode Curl_http_auth_act(struct connectdata *conn)
   bool pickproxy = FALSE;
   CURLcode code = CURLE_OK;
 
+  if(100 == conn->keep.httpcode)
+    /* this is a transient response code, ignore */
+    return CURLE_OK;
+
   if(data->state.authproblem)
     return data->set.http_fail_on_error?CURLE_HTTP_RETURNED_ERROR:CURLE_OK;
 
@@ -309,7 +330,8 @@ CURLcode Curl_http_auth_act(struct connectdata *conn)
     conn->newurl = strdup(data->change.url); /* clone URL */
 
     if((data->set.httpreq != HTTPREQ_GET) &&
-       (data->set.httpreq != HTTPREQ_HEAD)) {
+       (data->set.httpreq != HTTPREQ_HEAD) &&
+       !conn->bits.rewindaftersend) {
       code = perhapsrewind(conn);
       if(code)
         return code;
@@ -391,26 +413,19 @@ Curl_http_output_auth(struct connectdata *conn,
        and if this is one single bit it'll be used instantly. */
     authproxy->picked = authproxy->want;
 
-  /* To prevent the user+password to get sent to other than the original
-     host due to a location-follow, we do some weirdo checks here */
-  if(!data->state.this_is_a_follow ||
-     !data->state.first_host ||
-     curl_strequal(data->state.first_host, conn->host.name) ||
-     data->set.http_disable_hostname_check_before_authentication) {
-
-    /* Send proxy authentication header if needed */
-    if (conn->bits.httpproxy &&
-        (conn->bits.tunnel_proxy == proxytunnel)) {
-#ifdef USE_SSLEAY
-      if(authproxy->want == CURLAUTH_NTLM) {
-        auth=(char *)"NTLM";
-        result = Curl_output_ntlm(conn, TRUE);
-        if(result)
-          return result;
-      }
-      else
+  /* Send proxy authentication header if needed */
+  if (conn->bits.httpproxy &&
+      (conn->bits.tunnel_proxy == proxytunnel)) {
+#if defined(USE_SSLEAY) || defined(USE_WINDOWS_SSPI)
+    if(authproxy->picked == CURLAUTH_NTLM) {
+      auth=(char *)"NTLM";
+      result = Curl_output_ntlm(conn, TRUE);
+      if(result)
+        return result;
+    }
+    else
 #endif
-      if(authproxy->want == CURLAUTH_BASIC) {
+      if(authproxy->picked == CURLAUTH_BASIC) {
         /* Basic */
         if(conn->bits.proxy_user_passwd &&
            !checkheaders(data, "Proxy-authorization:")) {
@@ -424,7 +439,7 @@ Curl_http_output_auth(struct connectdata *conn,
         authproxy->done = TRUE;
       }
 #ifndef CURL_DISABLE_CRYPTO_AUTH
-      else if(authproxy->want == CURLAUTH_DIGEST) {
+      else if(authproxy->picked == CURLAUTH_DIGEST) {
         auth=(char *)"Digest";
         result = Curl_output_digest(conn,
                                     TRUE, /* proxy */
@@ -442,16 +457,23 @@ Curl_http_output_auth(struct connectdata *conn,
       else
         authproxy->multi = FALSE;
     }
-    else
-      /* we have no proxy so let's pretend we're done authenticating
-         with it */
-      authproxy->done = TRUE;
+  else
+    /* we have no proxy so let's pretend we're done authenticating
+       with it */
+    authproxy->done = TRUE;
+
+  /* To prevent the user+password to get sent to other than the original
+     host due to a location-follow, we do some weirdo checks here */
+  if(!data->state.this_is_a_follow ||
+     !data->state.first_host ||
+     curl_strequal(data->state.first_host, conn->host.name) ||
+     data->set.http_disable_hostname_check_before_authentication) {
 
     /* Send web authentication header if needed */
     {
       auth = NULL;
 #ifdef HAVE_GSSAPI
-      if((authhost->want == CURLAUTH_GSSNEGOTIATE) &&
+      if((authhost->picked == CURLAUTH_GSSNEGOTIATE) &&
          data->state.negotiate.context &&
          !GSS_ERROR(data->state.negotiate.status)) {
         auth=(char *)"GSS-Negotiate";
@@ -462,7 +484,7 @@ Curl_http_output_auth(struct connectdata *conn,
       }
       else
 #endif
-#ifdef USE_SSLEAY
+#if defined(USE_SSLEAY) || defined(USE_WINDOWS_SSPI)
       if(authhost->picked == CURLAUTH_NTLM) {
         auth=(char *)"NTLM";
         result = Curl_output_ntlm(conn, FALSE);
@@ -575,7 +597,7 @@ CURLcode Curl_http_input_auth(struct connectdata *conn,
   }
   else
 #endif
-#ifdef USE_SSLEAY
+#if defined(USE_SSLEAY) || defined(USE_WINDOWS_SSPI)
     /* NTLM support requires the SSL crypto libs */
     if(checkprefix("NTLM", start)) {
       *availp |= CURLAUTH_NTLM;
@@ -858,8 +880,7 @@ CURLcode add_buffer_send(send_buffer *in,
 
     if(conn->data->set.verbose)
       /* this data _may_ contain binary stuff */
-      Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, amount,
-                 conn->host.dispname);
+      Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, amount, conn);
 
     *bytes_written += amount;
 
@@ -1140,7 +1161,7 @@ CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
               /* output debug if that is requested */
               if(data->set.verbose)
                 Curl_debug(data, CURLINFO_HEADER_IN, line_start, perline,
-                           conn->host.dispname);
+                           conn);
 
               /* send the header to the callback */
               writetype = CLIENTWRITE_HEADER;
@@ -1223,7 +1244,7 @@ CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
  * Curl_http_connect() performs HTTP stuff to do at connect-time, called from
  * the generic Curl_connect().
  */
-CURLcode Curl_http_connect(struct connectdata *conn)
+CURLcode Curl_http_connect(struct connectdata *conn, bool *done)
 {
   struct SessionHandle *data;
   CURLcode result;
@@ -1262,6 +1283,8 @@ CURLcode Curl_http_connect(struct connectdata *conn)
     data->state.first_host = strdup(conn->host.name);
   }
 
+  *done = TRUE;
+
   return CURLE_OK;
 }
 
@@ -1275,7 +1298,6 @@ CURLcode Curl_http_done(struct connectdata *conn,
 {
   struct SessionHandle *data;
   struct HTTP *http;
-  (void)status; /* no use for us */
 
   data=conn->data;
   http=conn->proto.http;
@@ -1292,7 +1314,7 @@ CURLcode Curl_http_done(struct connectdata *conn,
 
     free(buff->buffer);
     free(buff);
-    http->send_buffer = NULL; /* cleaer the pointer */
+    http->send_buffer = NULL; /* clear the pointer */
   }
 
   if(HTTPREQ_POST_FORM == data->set.httpreq) {
@@ -1308,6 +1330,9 @@ CURLcode Curl_http_done(struct connectdata *conn,
   else if(HTTPREQ_PUT == data->set.httpreq)
     conn->bytecount = http->readbytecount + http->writebytecount;
 
+  if (status != CURLE_OK)
+    return (status);
+
   if(!conn->bits.retry &&
      ((http->readbytecount +
        conn->headerbytecount -
@@ -1327,7 +1352,7 @@ CURLcode Curl_http_done(struct connectdata *conn,
  * request is to be performed. This creates and sends a properly constructed
  * HTTP request.
  */
-CURLcode Curl_http(struct connectdata *conn)
+CURLcode Curl_http(struct connectdata *conn, bool *done)
 {
   struct SessionHandle *data=conn->data;
   char *buf = data->state.buffer; /* this is a short cut to the buffer */
@@ -1341,6 +1366,11 @@ CURLcode Curl_http(struct connectdata *conn)
   Curl_HttpReq httpreq = data->set.httpreq;
   char *addcookies = NULL;
 
+  /* Always consider the DO phase done after this function call, even if there
+     may be parts of the request that is not yet sent, since we can deal with
+     the rest of the request in the PERFORM phase. */
+  *done = TRUE;
+
   if(!conn->proto.http) {
     /* Only allocate this struct if we don't already have it! */
 
@@ -1775,7 +1805,7 @@ CURLcode Curl_http(struct connectdata *conn)
 #endif
 
     if(data->set.timecondition) {
-      struct tm *thistime;
+      struct tm *tm;
 
       /* Phil Karn (Fri, 13 Apr 2001) pointed out that the If-Modified-Since
        * header family should have their times set in GMT as RFC2616 defines:
@@ -1787,18 +1817,22 @@ CURLcode Curl_http(struct connectdata *conn)
 #ifdef HAVE_GMTIME_R
       /* thread-safe version */
       struct tm keeptime;
-      thistime = (struct tm *)gmtime_r(&data->set.timevalue, &keeptime);
+      tm = (struct tm *)gmtime_r(&data->set.timevalue, &keeptime);
 #else
-      thistime = gmtime(&data->set.timevalue);
+      tm = gmtime(&data->set.timevalue);
 #endif
 
-#ifdef HAVE_STRFTIME
       /* format: "Tue, 15 Nov 1994 12:45:26 GMT" */
-      strftime(buf, BUFSIZE-1, "%a, %d %b %Y %H:%M:%S GMT", thistime);
-#else
-      /* TODO: Right, we *could* write a replacement here */
-      strcpy(buf, "no strftime() support");
-#endif
+      snprintf(buf, BUFSIZE-1,
+               "%s, %02d %s %4d %02d:%02d:%02d GMT",
+               Curl_wkday[tm->tm_wday?tm->tm_wday-1:6],
+               tm->tm_mday,
+               Curl_month[tm->tm_mon],
+               tm->tm_year + 1900,
+               tm->tm_hour,
+               tm->tm_min,
+               tm->tm_sec);
+
       switch(data->set.timecondition) {
       case CURL_TIMECOND_IFMODSINCE:
       default:

lib/http.h

@@ -8,7 +8,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -34,9 +34,9 @@ CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
                                      char *hostname, int remote_port);
 
 /* protocol-specific functions set up to be called by the main engine */
-CURLcode Curl_http(struct connectdata *conn);
+CURLcode Curl_http(struct connectdata *conn, bool *done);
 CURLcode Curl_http_done(struct connectdata *, CURLcode);
-CURLcode Curl_http_connect(struct connectdata *conn);
+CURLcode Curl_http_connect(struct connectdata *conn, bool *done);
 
 /* The following functions are defined in http_chunks.c */
 void Curl_httpchunk_init(struct connectdata *conn);

lib/http_chunks.c

@@ -1,16 +1,16 @@
 /***************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
  * are also available at http://curl.haxx.se/docs/copyright.html.
- * 
+ *
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
  * furnished to do so, under the terms of the COPYING file.
@@ -43,7 +43,7 @@
 /* The last #include file should be: */
 #include "memdebug.h"
 
-/* 
+/*
  * Chunk format (simplified):
  *
  * <HEX SIZE>[ chunk extension ] CRLF
@@ -188,7 +188,7 @@ CHUNKcode Curl_httpchunk_read(struct connectdata *conn,
 #ifdef HAVE_LIBZ
           break;
 
-        case DEFLATE: 
+        case DEFLATE:
           /* update conn->keep.str to point to the chunk data. */
           conn->keep.str = datap;
           result = Curl_unencode_deflate_write(conn->data, &conn->keep,

lib/http_chunks.h

@@ -1,18 +1,18 @@
 #ifndef __HTTP_CHUNKS_H
 #define __HTTP_CHUNKS_H
 /***************************************************************************
- *                                  _   _ ____  _     
- *  Project                     ___| | | |  _ \| |    
- *                             / __| | | | |_) | |    
- *                            | (__| |_| |  _ <| |___ 
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
  * are also available at http://curl.haxx.se/docs/copyright.html.
- * 
+ *
  * You may opt to use, copy, modify, merge, publish, distribute and/or sell
  * copies of the Software, and permit persons to whom the Software is
  * furnished to do so, under the terms of the COPYING file.

lib/http_negotiate.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -166,12 +166,7 @@ int Curl_input_negotiate(struct connectdata *conn, char *header)
 
   len = strlen(header);
   if (len > 0) {
-    int rawlen;
-    input_token.length = (len+3)/4 * 3;
-    input_token.value = malloc(input_token.length);
-    if (input_token.value == NULL)
-      return ENOMEM;
-    rawlen = Curl_base64_decode(header, input_token.value);
+    int rawlen = Curl_base64_decode(header, (unsigned char **)&input_token.value);
     if (rawlen < 0)
       return -1;
     input_token.length = rawlen;
@@ -211,7 +206,7 @@ int Curl_input_negotiate(struct connectdata *conn, char *header)
           input_token.length = mechTokenLength;
           free(mechToken);
           mechToken = NULL;
-          infof(conn->data, "Parse SPNEGO Target Token succeded\n");
+          infof(conn->data, "Parse SPNEGO Target Token succeeded\n");
         }
     }
 #endif
@@ -292,7 +287,7 @@ CURLcode Curl_output_negotiate(struct connectdata *conn)
       neg_ctx->output_token.length = spnegoTokenLength;
       free(spnegoToken);
       spnegoToken = NULL;
-      infof(conn->data, "Make SPNEGO Initial Token succeded\n");
+      infof(conn->data, "Make SPNEGO Initial Token succeeded\n");
     }
   }
 #endif