Replace LF with CRLF. Ref RFC-2229, sec 2.3:

"Each command line must be terminated by a CRLF".

CHANGES

@@ -6,6 +6,275 @@
 
                                   Changelog
 
+Daniel (8 February 2005)
+- Gisle fixed problems when libcurl runs out of memory, and worked on making
+  sure the proper error code is returned for those occations.
+
+Daniel (7 February 2005)
+- Maruko pointed out a problem with inflate decompressing exactly 64K
+  contents.
+
+Daniel (5 February 2005)
+- Eric Vergnaud found a use of an uninitialised variable in the ftp when doing
+  PORT on ipv6-enabled hosts.
+
+- David Byron pointed out we could use BUFSIZE to read data (in
+  lib/transfer.c) instead of using BUFSIZE -1.
+
+Version 7.13.0 (1 February 2005)
+
+Daniel (31 January 2005)
+- Added Lars Nilsson's htmltitle.cc example
+
+Daniel (30 January 2005)
+- Fixed a memory leak when using the multi interface and the DO operation
+  failed (as in test case 205).
+
+- Fixed a valgrind warning for file:// operations.
+
+- Fixed a valgrind report in the url globbing code for the curl command line
+  tool.
+
+- Bugfixed the parser that scans the valgrind report outputs (in runtests.pl).
+  I noticed that it previously didn't detect and report the "Conditional jump
+  or move depends on uninitialised value(s)" error. When I fixed this, I
+  caught a few curl bugs with it. And then I had to spend time to make the
+  test suite IGNORE these errors when OpenSSL is used since it produce massive
+  amounts of valgrind warnings (but only of the "Conditional..." kind it
+  seems). So, if a test that requires SSL is run, it ignores the
+  "Conditional..." errors, and you'll get a "valgrind PARTIAL" output instead
+  of "valgrind OK".
+
+Daniel (29 January 2005)
+- Using the multi interface, and doing a requsted a re-used connection that
+  gets closed just after the request has been sent failed and did not re-issue
+  a request on a fresh reconnect like the easy interface did. Now it does!
+
+- Define CURL_MULTIEASY when building libcurl (lib/easy.c to be exact), to use
+  my new curl_easy_perform() that uses the multi interface to run the
+  request. It is a great testbed for the multi interface and I believe we
+  shall do it this way for real in the future when we have a successor to
+  curl_multi_fdset(). I've used this approach to detect and fix several of the
+  recent multi-interfaces issues.
+
+- Adjusted the KNOWN_BUGS #17 fix a bit more since the FTP code also did some
+  bad assumptions.
+
+- multi interface: when a request is denied due to "Maximum redirects
+  followed" libcurl leaked the last Location: URL.
+
+- Connect failures with the multi interface was often returned as "connect()
+  timed out" even though the reason was different.
+
+Daniel (28 January 2005)
+- KNOWN_BUGS #17 fixed. A DNS cache entry may not remain locked between two
+  curl_easy_perform() invokes. It was previously unlocked at disconnect, which
+  could mean that it remained locked between multiple transfers. The DNS cache
+  may not live as long as the connection cache does, as they are separate.
+
+  To deal with the lack of DNS (host address) data availability in re-used
+  connections, libcurl now keeps a copy of the IP adress as a string, to be
+  able to show it even on subsequent requests on the same connection.
+
+  The problem could be made to appear with this stunt:
+
+  1. create a multi handle
+  2. add an easy handle
+  3. fetch a URL that is persistent (leaves the connection alive)
+  4. remove the easy handle from the multi
+  5. kill the multi handle
+  6. create a multi handle
+  7. add the same easy handle to the new multi handle
+  8. fetch a URL from the same server as before (re-using the connection)
+
+- Stephen More pointed out that CURLOPT_FTPPORT and the -P option didn't work
+  when built ipv6-enabled. I've now made a fix for it. Writing test cases for
+  custom port hosts turned too tricky so unfortunately there's none.
+
+Daniel (25 January 2005)
+- Ian Ford asked about support for the FTP command ACCT, and I discovered it
+  is present in RFC959... so now (lib)curl supports it as well. --ftp-account
+  and CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an
+  account string after PASS have been sent away. The client responds
+  with "ACCT [account string]".) Added test case 228 and 229 to verify the
+  functionality. Updated the test FTP server to support ACCT somewhat.
+
+- David Shaw contributed a fairly complete and detailed autoconf test you can
+  use to detect libcurl and setup variables for the protocols the installed
+  libcurl supports: docs/libcurl/libcurl.m4
+
+Daniel (21 January 2005)
+- Major FTP third party transfer overhaul.
+
+  These four options are now obsolete: CURLOPT_SOURCE_HOST,
+  CURLOPT_SOURCE_PATH, CURLOPT_SOURCE_PORT (this option didn't work before)
+  and CURLOPT_PASV_HOST.
+
+  These two options are added: CURLOPT_SOURCE_URL and CURLOPT_SOURCE_QUOTE.
+
+  The target-side didn't use the proper path with RETR, and thus this only
+  worked correctly in the login path (i.e without doing any CWD). The source-
+  side still uses a wrong path, but the fix for this will need to wait. Verify
+  the flaw by using a source URL with included %XX-codes.
+
+  Made CURLOPT_FTPPORT control weather the target operation should use PORT
+  (or not). The other side thus uses passive (PASV) mode.
+
+  Updated the ftp3rdparty.c example source to use the updated options.
+
+  Added support for a second FTP server in the test suite. Named... ftp2.
+  Added test cases 230, 231 and 232 as a few first basic tests of very simple
+  3rd party transfers.
+
+  Changed the debug output to include 'target' and 'source' when a 3rd party
+  is being made, to make it clearer what commands/responses came on what
+  connection.
+
+  Added three new command line options: --3p-url, --3p-user and --3p-quote.
+
+  Documented the command line options and the curl_easy_setopt options related
+  to third party transfers.
+
+  (Temporarily) disabled the ability to re-use an existing connection for the
+  source connection. This is because it needs to force a new in case the
+  source and target is the same host, and the host name check is trickier now
+  when the source is identified with a full URL instead of a plain host name
+  like before.
+
+  TODO (short-term) for 3rd party transfers: quote support. The options are
+  there, we need to add test cases to verify their functionality.
+
+  TODO (long-term) for 3rd party transfers: IPv6 support (EPRT and EPSV etc)
+  and SSL/TSL support.
+
+Daniel (20 January 2005)
+- Philippe Hameau found out that -Q "+[command]" didn't work, although some
+  code was written for it. I fixed and added test case 227 to verify it.
+  The curl.1 man page didn't mention the '+' so I added it.
+
+Daniel (19 January 2005)
+- Stephan Bergmann made libcurl return CURLE_URL_MALFORMAT if an FTP URL
+  contains %0a or %0d in the user, password or CWD parts. (A future fix would
+  include doing it for %00 as well - see KNOWN_BUGS for details.) Test case
+  225 and 226 were added to verify this
+
+- Stephan Bergmann pointed out two flaws in libcurl built with HTTP disabled:
+
+  1) the proxy environment variables are still read and used to set HTTP proxy
+
+  2) you couldn't disable http proxy with CURLOPT_PROXY (since the option was
+     disabled). This is important since apps may want to disable HTTP proxy
+     without actually knowing if libcurl was built to disable HTTP or not.
+
+  Based on Stephan's patch, both these issues should now be fixed.
+
+Daniel (18 January 2005)
+- Cody Jones' enhanced version of Samuel D<>az Garc<72>a's MSVC makefile patch was
+  applied.
+
+Daniel (16 January 2005)
+- Alex aka WindEagle pointed out that when doing "curl -v dictionary.com", curl
+  assumed this used the DICT protocol. While guessing protocols will remain
+  fuzzy, I've now made sure that the host names must start with "[protocol]."
+  for them to be a valid guessable name. I also removed "https" as a prefix
+  that indicates HTTPS, since we hardly ever see any host names using that.
+
+Daniel (13 January 2005)
+- Inspired by Martijn Koster's patch and example source at
+  http://www.greenhills.co.uk/mak/gentoo/curl-eintr-bug.c, I now made the
+  select() and poll() calls properly loop if they return -1 and errno is
+  EINTR. glibc docs for this is found here:
+  http://www.gnu.org/software/libc/manual/html_node/Interrupted-Primitives.html
+
+  This last link says BSD doesn't have this "effect". Will there be a problem
+  if we do this unconditionally?
+
+Daniel (11 January 2005)
+- Dan Torop cleaned up a few no longer used variables from David Phillips'
+  select() overhaul fix.
+
+- Cyrill Osterwalder posted a detailed analysis about a bug that occurs when
+  using a custom Host: header and curl fails to send a request on a re-used
+  persistent connection and thus creates a new connection and resends it. It
+  then sent two Host: headers. Cyrill's analysis was posted here:
+  http://curl.haxx.se/mail/archive-2005-01/0022.html
+
+- Bruce Mitchener identified (bug report #1099640) the never-ending SOCKS5
+  problem with the version byte and the check for bad versions. Bruce has lots
+  of clues on this, and based on his suggestion I've now removed the check of
+  that byte since it seems to be able to contain 1 or 5.
+
+Daniel (10 January 2005)
+- Pavel Orehov reported memory problems with the multi interface in bug report
+  #1098843. In short, a shared DNS cache was setup for a multi handle and when
+  the shared cache was deleted before the individual easy handles, the latter
+  cleanups caused read/writes to already freed memory.
+
+- Hzhijun reported a memory leak in the SSL certificate code, that leaked the
+  remote certificate name when it didn't match the used host name.
+
+Gisle (8 January 2005)
+- Added Makefile.Watcom files (src/lib). Updated Makefile.dist.
+
+Daniel (7 January 2005)
+- Improved the test script's valgrind log parser to actually work! Also added
+  the ability to disable the log scanner for specific test cases. Test case
+  509 results in numerous problems and leaks in OpenSSL and has to get it
+  disabled.
+
+Daniel (6 January 2005)
+- Fixed a single-byte read out of bounds in test case 39 in the curl tool code
+  (i.e not in the library).
+
+- Bug report #1097019 identified a problem when doing -d "data" with -G and
+  sending it to two URLs with {}. Added test 199 to verify the fix.
+
+Daniel (4 January 2005)
+- Marty Kuhrt adjusted a VMS build script slightly
+
+- Kai Sommerfeld and Gisle Vanem fixed libcurl to build with IPv6 support on
+  Win2000.
+
+Daniel (2 January 2005)
+- Alex Neblett updated the MSVC makefiles slightly.
+
+Daniel (25 December 2004)
+- Removed src/config.h.in from CVS, it is now copied from the (generated)
+  lib/config.h.in instead, as they can very well be the same. This removes a
+  "manual hassle". You may want to re-run buildconf now.
+
+- Werner Koch filed Debian bug report #286794, mentioning that curl contained
+  non-free (by Debian's view) source code. This was Angus Mackay's
+  src/getpass.c source code. I tried to contact him about it to quickly solve
+  this issue, but his email addresses bounce and I got some time "over" and
+  reimplemented the functionality once brought by Angus. We no longer use any
+  of Angus' original code and the new function is much simpler (IMO). Issue
+  solved.
+
+Daniel (24 December 2004)
+- David Shaw added --protocols to curl-config, so that it now lists all
+  protocols libcurl was built to support. --feature no longer lists disabled
+  protocols.
+
+Daniel (23 December 2004)
+- David Shaw fixed the configure --disable-[protocol] variables so that
+  curl-config --feature now works correctly!
+
+Daniel (22 December 2004)
+- Rune Kleveland fixed a minor memory leak for received cookies with the
+  (rare) version attribute set.
+
+- Marcin Konicki provided two configure fixes and a source fix to make curl
+  build out-of-the-box on BeOS.
+
+Daniel (21 December 2004)
+- Added test case 217 that verified CURLINFO_HTTP_CONNECTCODE, and I made the
+  -w option support 'http_connect' to make it easier to verify!
+
+- Fixed lib/select.c include order to build fine on FreeBSD
+
+- Fixed failf()'s reuse of the va_list variable that crashed on FreeBSD.
+  Pointed out by Peter Pentchev.
 
 Version 7.12.3 (20 December 2004)
 

Makefile.dist

@@ -53,6 +53,18 @@ borland-clean:
 	cd ..\src
 	make -f Makefile.b32 clean
 
+watcom:
+	cd lib
+	wmake -f Makefile.Watcom
+	cd ..\src
+	wmake -f Makefile.Watcom
+
+watcom-clean:
+	cd lib
+	wmake -f Makefile.Watcom clean
+	cd ..\src
+	wmake -f Makefile.Watcom clean
+
 mingw32:
 	$(MAKE) -C lib -f Makefile.m32 ZLIB=1
 	$(MAKE) -C src -f Makefile.m32 ZLIB=1
@@ -65,6 +77,37 @@ mingw32-clean:
 	$(MAKE) -C lib -f Makefile.m32 clean
 	$(MAKE) -C src -f Makefile.m32 clean
 
+vc-clean:
+	cd lib
+	nmake -f Makefile.vc6 clean
+	cd ..\src
+	nmake -f Makefile.vc6 clean
+
+vc-all:
+	cd lib
+	nmake -f Makefile.vc6 cfg=release
+	nmake -f Makefile.vc6 cfg=release-ssl
+	nmake -f Makefile.vc6 cfg=release-zlib
+	nmake -f Makefile.vc6 cfg=release-ssl-zlib
+	nmake -f Makefile.vc6 cfg=release-ssl-dll
+	nmake -f Makefile.vc6 cfg=release-zlib-dll
+	nmake -f Makefile.vc6 cfg=release-ssl-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=release-dll
+	nmake -f Makefile.vc6 cfg=release-dll-ssl-dll
+	nmake -f Makefile.vc6 cfg=release-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=release-dll-ssl-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug
+	nmake -f Makefile.vc6 cfg=debug-ssl
+	nmake -f Makefile.vc6 cfg=debug-zlib
+	nmake -f Makefile.vc6 cfg=debug-ssl-zlib
+	nmake -f Makefile.vc6 cfg=debug-ssl-dll
+	nmake -f Makefile.vc6 cfg=debug-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug-ssl-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug-dll
+	nmake -f Makefile.vc6 cfg=debug-dll-ssl-dll
+	nmake -f Makefile.vc6 cfg=debug-dll-zlib-dll
+	nmake -f Makefile.vc6 cfg=debug-dll-ssl-dll-zlib-dll
+
 vc:
 	cd lib
 	nmake /f Makefile.vc6 cfg=release
@@ -93,13 +136,43 @@ vc-ssl-dll:
 	cd lib
 	nmake /f Makefile.vc6 cfg=release-ssl-dll
 	cd ..\src
-	nmake /f Makefile.vc6
+	nmake /f Makefile.vc6 cfg=release-ssl-dll
 
-vc-libcurl-ssl-dll:
+vc-dll-ssl-dll:
 	cd lib
-	nmake /f Makefile.vc6 cfg=release-libcurl-ssl-dll
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll
 	cd ..\src
-	nmake /f Makefile.vc6
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll
+
+vc-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-dll
+
+vc-dll-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-dll-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-dll-zlib-dll
+
+vc-dll-ssl-dll-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-dll-ssl-dll-zlib-dll
+
+vc-ssl-dll-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-ssl-dll-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-ssl-dll-zlib-dll
+
+vc-zlib-dll:
+	cd lib
+	nmake /f Makefile.vc6 cfg=release-zlib-dll
+	cd ..\src
+	nmake /f Makefile.vc6 cfg=release-zlib-dll
 
 djgpp:
 	$(MAKE) -C lib -f Makefile.dj

README

@@ -34,20 +34,27 @@ WEB SITE
 
         Sweden    -- http://curl.haxx.se/
         Australia -- http://curl.planetmirror.com/
+        Austria   -- http://curl.gds.tuwien.ac.at/
         Denmark   -- http://curl.cofman.dk/
         Estonia   -- http://curl.wildyou.net/
+        France    -- http://curl.mirror.internet.tp/
+        Germany   -- http://curl.kgt.org/
         Germany   -- http://curl.mirror.at.stealer.net/
         Germany   -- http://curl.netmirror.org/
         Russia    -- http://curl.tsuren.net/
+        Taiwan    -- http://curl.cs.pu.edu.tw/
         Thailand  -- http://curl.siamu.ac.th/
         US (CA)   -- http://curl.mirror.redwire.net/
-        US        -- http://curl.signal42.com/
+        US (CA)   -- http://curl.mirrormonster.com/
+        US (CA)   -- http://curl.signal42.com/
+        US (TX)   -- http://curl.109k.com/
 
 DOWNLOAD
 
   The official download mirror sites are:
 
         Australia -- http://curl.planetmirror.com/download.html
+        Austria   -- http://curl.gds.tuwien.ac.at/download.html
         Estonia   -- http://curl.wildyou.net/download.html
         Germany   -- ftp://ftp.fu-berlin.de/pub/unix/network/curl/
         Germany   -- http://curl.mirror.at.stealer.net/download.html
@@ -57,8 +64,12 @@ DOWNLOAD
         Russia    -- http://curl.tsuren.net/download.html
         Sweden    -- ftp://ftp.sunet.se/pub/www/utilities/curl/
         Sweden    -- http://cool.haxx.se/curl/
+        Taiwan    -- http://curl.cs.pu.edu.tw/download.html
         Thailand  -- http://curl.siamu.ac.th/download.html
         US (CA)   -- http://curl.mirror.redwire.net/download.html
+        US (CA)   -- http://curl.mirrormonster.com/download.html
+        US (CA)   -- http://curl.signal42.com/download.html
+        US (TX)   -- http://curl.109k.com/download.html
 
 CVS
 

RELEASE-NOTES

@@ -1,81 +1,27 @@
-Curl and libcurl 7.12.3
+Curl and libcurl 7.13.1
 
- Public curl release number:               84
+ Public curl release number:               86
- Releases counted from the very beginning: 111
+ Releases counted from the very beginning: 113
- Available command line options:           100
+ Available command line options:           104
- Available curl_easy_setopt() options:     123
+ Available curl_easy_setopt() options:     122
  Number of public functions in libcurl:    46
- Amount of public web site mirrors:        14
+ Amount of public web site mirrors:        15
  Number of known libcurl bindings:         29
 
 This release includes the following changes:
 
- o PKCS12 certificate support added
+ o
- o added CURLINFO_SSL_ENGINES (and "--engine list")
- o new configure options: --disable-cookies, --disable-crypto-auth and
-   --disable-verbose
- o persistent ftp request improvements
- o CURLOPT_IOCTLFUNCTION and CURLOPT_IOCTLDATA added. If your app uses HTTP
-   Digest, NTLM or Negotiate authentication, you will most likely want to use
-   these
- o -w time_redirect and num_redirects
- o no longer uses libcurl.def for building on Windows, OS/2 and Netware
- o builds on Windows CE
- o request retrying, --retry and family added
- o FTP 3rd party transfers with source and dest on the same host now works
- o added CURLINFO_NUM_CONNECTS
 
 This release includes the following bugfixes:
 
- o curl -E on windows accepts "c:/path" with forward-slash
+ o 
- o several improvements for large file support on windows
- o file handle leak in aborted multipart formpost file upload
- o -T upload multiple files with backslashes in file names
- o modified credentials between two requests on a persistent http connection
- o large file file:// resumes on Windows
- o URLs with username and IPv6 numerical addresses
- o configure works better with SSL libs in a "non-standard ld.so dir"
- o curl-config --vernum zero prefixed
- o bad memory access in the NTLM code
- o EPSV on multi-homed servers now works correctly
- o chunked-encoded transfers could get closed pre-maturely without error
- o proxy CONNECT now default timeouts after 3600 seconds
- o disabling EPSV or EPRT is ignored when connecting to an IPv6 FTP server
- o no extra progress meter newline output after each Location: followed
- o HTTP PUT/POST with Digest, NTLM or Negotiate no longer uses HEAD
- o works with or gracefully bails out when exceeding FD_SETSIZE file
-   descriptors
- o CURLINFO_REDIRECT_TIME works
- o building with gssapi libs and hdeaders in the default dirs
- o curl_getdate() parsing of dates later than year 2037 with 32 bit time_t
- o curl -v when stderr is closed wrote debug messages to the network socket
- o build failure with libidn 0.3.X or older
- o huge POSTs on VMS
- o configure no longer uses pkg-config on cross-compiles
- o potential gzip decompress memory leak
- o "-C - --fail" on a HTTP page already downloaded
- o formposting a zero byte file
- o use setlocale() for better IDN functionality by default
 
 Other curl-related news since the previous public release:
 
- o pycurl 7.12.2: http://pycurl.sf.net/
+ o 
- o TclCurl 0.12.2: http://personal1.iddeo.es/andresgarci/tclcurl/english/
- o libcurl.NET 1.2: http://www.seasideresearch.com/downloads.html
- o RCurl 0.5.1: http://www.omegahat.org/RCurl/
- o libcurl.mono 1.0:
-   http://forge.novell.com/modules/xfmod/project/?libcurl-mono
- o new German curl mirror: http://curl.kgt.org/
 
 This release would not have looked like this without help, code, reports and
 advice from friends like these:
 
- Peter Wullinger, Guillaume Arluison, Alexander Krasnostavsky, Mohun Biswas,
- Tomas Pospisek, Gisle Vanem, Dan Fandrich, Paul Nolan, Andres Garcia, Tim
- Sneddon, Ian Gulliver, Jean-Philippe Barrette-LaPierre, Jeff Phillips,
- Wojciech Zwiefka, David Phillips, Reinout van Schouwen, Maurice Barnum,
- Richard Atterer, Rene Bernhardt, Matt Veenstra, Bryan Henderson, Ton Voon,
- Kai Sommerfeld, David Byron, Harshal Pradhan, Tom Lee, Dinar, Jean-Marc
- Ranger, Samuel Listopad
 
         Thanks! (and sorry if I forgot to mention someone)

TODO-RELEASE

@@ -1,8 +1,36 @@
 Issues not sorted in any particular order.
 
-To get fixed in 7.12.3 (planned release: December 2004)
+To get fixed in 7.13.1 (planned release: April 2005)
 ======================
 
+58 - Fix KNOWN_BUGS #19: "FTP 3rd party transfers with the multi interface
+     doesn't work"
+
+59 - Figure out a fix for David Byron's SSL problems:
+     http://curl.haxx.se/mail/lib-2005-01/0240.html
+
 47 - Peter Sylvester's patch for SRP on the TLS layer
      Awaits OpenSSL support for this, no need to support this in libcurl before
      there's an OpenSSL release that does it.
+
+54 - Turn the FTP code into a state machine to support the multi interface
+     100% non-blocking.
+
+To get fixed in 7.14.0
+======================
+
+55 - Add a function to the multi interface that gets file descriptors, as an
+     alternative to the curl_multi_fdset(). This is necessary to allow apps to
+     properly avoid the FD_SETSIZE problem.
+
+56 - Make curl_easy_perform() a wrapper-function that simply creates a multi
+     handle, adds the easy handle to it, runs curl_multi_perform() until the
+     transfer is done, then detach the easy handle, destroy the multi handle
+     and return the easy handle's return code. This will thus make everything
+     internally use and assume the multi interface. The select()-loop should
+     use the new function from (55).
+
+57 - Add an interface to libcurl for getting and setting cookies from an easy
+     handle. One idea: http://curl.haxx.se/mail/lib-2004-12/0195.html the
+     older idea: http://curl.haxx.se/dev/COOKIES. We need to settle on some
+     middle ground I guess.

acinclude.m4

@@ -87,9 +87,7 @@ AC_DEFINE(HAVE_IOCTLSOCKET_CASE, 1, [use Ioctlsocket() for non-blocking sockets]
 dnl Ioctlsocket didnt compile, do test 5!
   AC_TRY_COMPILE([
 /* headers for SO_NONBLOCK test (BeOS) */
-#include <sys/types.h>
+#include <socket.h>
-#include <unistd.h>
-#include <fcntl.h>
 ],[
 /* SO_NONBLOCK source code */
  long b = 1;
@@ -695,15 +693,15 @@ AC_DEFUN([CURL_CC_DEBUG_OPTS],
          dnl -Wcast-align is a bit too annoying on all gcc versions ;-)
 
          if test "$gccnum" -ge "207"; then
-           dnl gcc 2.7 or later (well, they don't work on 2.2.2)
+           dnl gcc 2.7 or later
-           WARN="$WARN -Wno-long-long -Wmissing-declarations -Wsign-compare"
+           WARN="$WARN -Wmissing-declarations"
          fi
 
          if test "$gccnum" -gt "295"; then
            dnl only if the compiler is newer than 2.95 since we got lots of
            dnl "`_POSIX_C_SOURCE' is not defined" in system headers with
            dnl gcc 2.95.4 on FreeBSD 4.9!
-           WARN="$WARN -Wundef"
+           WARN="$WARN -Wundef -Wno-long-long -Wsign-compare"
          fi
 
          if test "$gccnum" -ge "296"; then

buildconf

@@ -168,6 +168,8 @@ echo "buildconf: running aclocal hack to convert all mv to mv -f"
 perl -i.bak -pe 's/\bmv +([^-\s])/mv -f $1/g' aclocal.m4
 echo "buildconf: running autoheader"
 ${AUTOHEADER:-autoheader} || die "The autoheader command failed"
+echo "buildconf: cp lib/config.h.in src/config.h.in"
+cp lib/config.h.in src/config.h.in
 echo "buildconf: running autoconf"
 ${AUTOCONF:-autoconf}     || die "The autoconf command failed"
 

configure.ac

@@ -133,8 +133,8 @@ AC_HELP_STRING([--disable-http],[Disable HTTP support]),
        AC_DEFINE(CURL_DISABLE_HTTP, 1, [to disable HTTP])
        AC_MSG_WARN([disable HTTP disables FTP over proxy and GOPHER too])
        AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable GOPHER])
-       AC_SUBST(CURL_DISABLE_HTTP)
+       AC_SUBST(CURL_DISABLE_HTTP, [1])
-       AC_SUBST(CURL_DISABLE_GOPHER)
+       AC_SUBST(CURL_DISABLE_GOPHER, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -149,7 +149,7 @@ AC_HELP_STRING([--disable-ftp],[Disable FTP support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_FTP, 1, [to disable FTP])
-       AC_SUBST(CURL_DISABLE_FTP)
+       AC_SUBST(CURL_DISABLE_FTP, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -164,7 +164,7 @@ AC_HELP_STRING([--disable-gopher],[Disable GOPHER support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable GOPHER])
-       AC_SUBST(CURL_DISABLE_GOPHER)
+       AC_SUBST(CURL_DISABLE_GOPHER, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -179,7 +179,7 @@ AC_HELP_STRING([--disable-file],[Disable FILE support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_FILE, 1, [to disable FILE])
-       AC_SUBST(CURL_DISABLE_FILE)
+       AC_SUBST(CURL_DISABLE_FILE, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -194,7 +194,7 @@ AC_HELP_STRING([--disable-ldap],[Disable LDAP support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
-       AC_SUBST(CURL_DISABLE_LDAP)
+       AC_SUBST(CURL_DISABLE_LDAP, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -209,7 +209,7 @@ AC_HELP_STRING([--disable-dict],[Disable DICT support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_DICT, 1, [to disable DICT])
-       AC_SUBST(CURL_DISABLE_DICT)
+       AC_SUBST(CURL_DISABLE_DICT, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -224,7 +224,7 @@ AC_HELP_STRING([--disable-telnet],[Disable TELNET support]),
   no)
        AC_MSG_RESULT(no)
        AC_DEFINE(CURL_DISABLE_TELNET, 1, [to disable TELNET])
-       AC_SUBST(CURL_DISABLE_TELNET)
+       AC_SUBST(CURL_DISABLE_TELNET, [1])
        ;;
   *)   AC_MSG_RESULT(yes)
        ;;
@@ -314,6 +314,16 @@ then
              )
 fi
 
+if test "$HAVE_GETHOSTBYNAME" != "1"
+then
+  dnl gethostbyname in the net lib - for BeOS
+  AC_CHECK_LIB(net, gethostbyname,
+               [HAVE_GETHOSTBYNAME="1"
+               LIBS="$LIBS -lnet"
+               ])
+fi
+
+
 if test "$HAVE_GETHOSTBYNAME" = "1"; then
   AC_DEFINE(HAVE_GETHOSTBYNAME, 1, [If you have gethostbyname])
 else
@@ -1171,6 +1181,7 @@ AC_CHECK_HEADERS(
         sys/resource.h \
         libgen.h \
         locale.h \
+        errno.h \
         setjmp.h,
 dnl to do if not found
 [],
@@ -1253,8 +1264,6 @@ AC_CHECK_FUNCS( strtoll \
                 inet_addr \
                 inet_ntoa \
                 inet_pton \
-                tcsetattr \
-                tcgetattr \
                 perror \
                 closesocket \
                 siginterrupt \

curl-config.in

@@ -19,7 +19,8 @@ Available values for OPTION include:
   --ca        ca bundle install path
   --cc        compiler
   --cflags    pre-processor and compiler flags
-  --feature   newline separated list of enabled features
+  --features  newline separated list of enabled features
+  --protocols newline separated list of enabled protocols
   --help      display this help and exit
   --libs      library linking information
   --prefix    curl install prefix
@@ -56,7 +57,7 @@ while test $# -gt 0; do
 	echo "$prefix"
 	;;
 
-    --feature)
+    --feature|--features)
 	if test "@USE_SSLEAY@" = "1"; then
           echo "SSL"
         fi
@@ -69,32 +70,40 @@ while test $# -gt 0; do
 	if test "@HAVE_LIBZ@" = "1"; then
           echo "libz"
         fi
-	if test "@CURL_DISABLE_HTTP@" = "1"; then
-          echo "HTTP-disabled"
-        fi
-	if test "@CURL_DISABLE_FTP@" = "1"; then
-          echo "FTP-disabled"
-        fi
-	if test "@CURL_DISABLE_GOPHER@" = "1"; then
-          echo "GOPHER-disabled"
-        fi
-	if test "@CURL_DISABLE_FILE@" = "1"; then
-          echo "FILE-disabled"
-        fi
-	if test "@CURL_DISABLE_TELNET@" = "1"; then
-          echo "TELNET-disabled"
-        fi
-	if test "@CURL_DISABLE_LDAP@" = "1"; then
-          echo "LDAP-disabled"
-        fi
-	if test "@CURL_DISABLE_DICT@" = "1"; then
-          echo "DICT-disabled"
-        fi
 	if test "@HAVE_ARES@" = "1"; then
           echo "AsynchDNS"
         fi
 	;;
 
+    --protocols)
+	if test "@CURL_DISABLE_HTTP@" != "1"; then
+          echo "HTTP"
+	  if test "@USE_SSLEAY@" = "1"; then
+            echo "HTTPS"
+          fi
+        fi
+	if test "@CURL_DISABLE_FTP@" != "1"; then
+          echo "FTP"
+	  if test "@USE_SSLEAY@" = "1"; then
+            echo "FTPS"
+          fi
+        fi
+	if test "@CURL_DISABLE_GOPHER@" != "1"; then
+          echo "GOPHER"
+        fi
+	if test "@CURL_DISABLE_FILE@" != "1"; then
+          echo "FILE"
+        fi
+	if test "@CURL_DISABLE_TELNET@" != "1"; then
+          echo "TELNET"
+        fi
+	if test "@CURL_DISABLE_LDAP@" != "1"; then
+          echo "LDAP"
+        fi
+	if test "@CURL_DISABLE_DICT@" != "1"; then
+          echo "DICT"
+        fi
+	;;
     --version)
 	echo libcurl @VERSION@
 	exit 0
@@ -123,8 +132,7 @@ while test $# -gt 0; do
 
     *)
         echo "unknown option: $1"
-	usage
+	usage 1
-	exit 1
 	;;
     esac
     shift

docs/BINDINGS

@@ -25,10 +25,14 @@ Basic
   ScriptBasic bindings to libcurl. Writtten by Peter Verhas
   http://scriptbasic.com/
 
+C
+  libcurl is a C library in itself!
+  http://curl.haxx.se/libcurl/
+
 C++
 
   Written by Jean-Philippe Barrette-LaPierre
-  http://www.sourceforge.net/projects/curlpp
+  http://rrette.com/curlpp.html
 
 Ch
 
@@ -68,7 +72,7 @@ glib/GTK+
 
 Java
 
-  Written by Daniel Stenberg
+  Maintained by Vic Hanson
   http://curl.haxx.se/libcurl/java/
 
 Lua
@@ -76,16 +80,16 @@ Lua
   Written by Steve Dekorte
   http://curl.haxx.se/libcurl/lua/
 
-.NET
-
-  Written by Jeffrey Phillips
-  http://www.seasideresearch.com/downloads.html
-
 Mono
 
   Written by Jeffrey Phillips
   http://forge.novell.com/modules/xfmod/project/?libcurl-mono
 
+.NET
+
+  Written by Jeffrey Phillips
+  http://www.seasideresearch.com/downloads.html
+
 Object-Pascal
 
   Free Pascal, Delphi and Kylix binding written by Christophe Espern.

docs/FAQ

@@ -1,4 +1,4 @@
-Updated: August 18, 2004 (http://curl.haxx.se/docs/faq.html)
+Updated: December 21, 2004 (http://curl.haxx.se/docs/faq.html)
                                   _   _ ____  _
                               ___| | | |  _ \| |
                              / __| | | | |_) | |
@@ -42,6 +42,7 @@ FAQ
   3.14 Does curl support javascript or pac (automated proxy config)?
   3.15 Can I do recursive fetches with curl?
   3.16 What certificates do I need when I use SSL?
+  3.17 How do I list the root dir of an FTP server?
 
  4. Running Problems
   4.1 Problems connecting to SSL servers.
@@ -520,6 +521,18 @@ FAQ
     that was signed by one of the authorities in the bundle. curl comes with a
     default CA cert bundle. You can override the default.
 
+  3.17 How do I list the root dir of an FTP server?
+
+  There are two ways. The way defined in the RFC is to use an encoded slash
+  in the first path part. List the "/tmp" dir like this:
+
+     curl ftp://ftp.sunet.se/%2ftmp/
+
+  or the not-quite-kosher-but-more-readable way, by simply starting the path
+  section of the URL with a slash:
+
+     curl ftp://ftp.sunet.se//tmp/
+
 
 4. Running Problems
 
@@ -623,7 +636,10 @@ FAQ
 
   4.6 Can you tell me what error code 142 means?
 
-  All error codes that are larger than the highest documented error code means
+  All curl error codes are described at the end of the man page, in the
+  section called "EXIT CODES".
+
+  Error codes that are larger than the highest documented error code means
   that curl has exited due to a crash. This is a serious error, and we
   appreciate a detailed bug report from you that describes how we could go
   ahead and repeat this!
@@ -806,13 +822,13 @@ FAQ
   When building an application that uses the static libcurl library, you must
   add -DCURL_STATICLIB to your CFLAGS. Otherwise the linker will look for
   dynamic import symbols. If you get linker error like "unknown symbol
-  __imp__curl_easy_init ..." you have linked against the wrong (static) library.
+  __imp__curl_easy_init ..." you have linked against the wrong (static)
-  If you want to use the curl.dll and import lib, you don't need any extra CFLAGS,
+  library.  If you want to use the libcurl.dll and import lib, you don't need
-  but use one of the import libraries below. These are the libraries produced by
+  any extra CFLAGS, but use one of the import libraries below. These are the
-  the various lib/Makefile.* files:
+  libraries produced by the various lib/Makefile.* files:
 
-  Target:          static lib.   import lib for curl*.dll.
+  Target:          static lib.   import lib for libcurl*.dll.
-  --------------------------------------------------------
+  -----------------------------------------------------------
   MingW:           libcurl.a     libcurldll.a
   MSVC (release):  libcurl.lib   libcurl_imp.lib
   MSVC (debug):    libcurld.lib  libcurld_imp.lib

docs/INSTALL

@@ -293,6 +293,13 @@ Win32
       - Add defines to Project/Settings/C/C++/General/Preprocessor Definitions
         in the curllib.dsw/curllib.dsp Visual C++ 6 IDE project.
 
+
+   Important (with SSL or not):
+      When building an application that uses the static libcurl library, you
+      must add '-DCURL_STATICLIB' to your CFLAGS.  Otherwise the linker will
+      look for dynamic import symbols.
+
+
 IBM OS/2
 ========
 

docs/KNOWN_BUGS

@@ -3,58 +3,86 @@ join in and help us correct one or more of these! Also be sure to check the
 changelog of the current development status, as one or more of these problems
 may have been fixed since this was written!
 
-* Test case 165 might fail on system which has libidn present, but with an
+20. valgrind errors occur too often when 'make test' is used. It is because
+  too many third-party libs and tools have problems. When curl is built
+  without --disable-shared, the testing is done with a front-end script which
+  makes the valgrind testing include (ba)sh as well and that often causes
+  valgrind errors. Either we improve the valgrind error scanner a lot to
+  better identify (lib)curl errors only, or we disable valgrind checking by
+  default.
+
+19. FTP 3rd party transfers with the multi interface doesn't work. Test:
+  define CURL_MULTIEASY, rebuild curl, run test case 230 - 232.
+
+18. test case 57 has </test> that should be </client> but when corrected, the
+  test case fails!
+
+16. FTP URLs passed to curl may contain NUL (0x00) in the RFC 1738 <user>,
+  <password>, and <fpath> components, encoded as "%00".  The problem is that
+  curl_unescape does not detect this, but instead returns a shortened C
+  string.  From a strict FTP protocol standpoint, NUL is a valid character
+  within RFC 959 <string>, so the way to handle this correctly in curl would
+  be to use a data structure other than a plain C string, one that can handle
+  embedded NUL characters.  From a practical standpoint, most FTP servers
+  would not meaningfully support NUL characters within RFC 959 <string>,
+  anyway (e.g., UNIX pathnames may not contain NUL).
+
+15. Test case 241 fails on all systems that support IPv6 but that don't have
+  the host name 'ip6-localhost' in /etc/hosts (or similar) since the test case
+  uses that host name to test the IPv6 name to address resolver.
+
+14. Test case 165 might fail on system which has libidn present, but with an
   old iconv version (2.1.3 is a known bad version), since it doesn't recognize
   the charset when named ISO8859-1. Changing the name to ISO-8859-1 makes the
   test pass, but instead makes it fail on Solaris hosts that use its native
   iconv.
 
-* curl version 7.12.2 fails on AIX if compiled with --enable-ares.
+13. curl version 7.12.2 fails on AIX if compiled with --enable-ares.
   The workaround is to combine --enable-ares with --disable-shared
 
-* When connecting to a SOCKS proxy, the (connect) timeout is not properly
+12. When connecting to a SOCKS proxy, the (connect) timeout is not properly
   acknowledged after the actual TCP connect (during the SOCKS "negotiate"
   phase). Pointed out by Lucas. Fix: need to select() and timeout properly.
 
-* Using configure --disable-[protocol] may cause 'make test' to fail for
+11. Using configure --disable-[protocol] may cause 'make test' to fail for
   tests using the disabled protocol(s).
 
-* To get HTTP Negotiate authentication to work fine, you need to provide a
+10. To get HTTP Negotiate authentication to work fine, you need to provide a
   (fake) user name (this concerns both curl and the lib) because the code
   wrongly only considers authentication if there's a user name provided.
   Bug report #1004841. How? http://curl.haxx.se/mail/lib-2004-08/0182.html
 
-* --limit-rate using -d or -F does not work. This is because the limit logic
+9. --limit-rate using -d or -F does not work. This is because the limit logic
   is provided by the curl app in its read/write callbacks, and when doing
   -d/-F the callbacks aren't used! Bug report #921395.
 
-* Doing resumed upload over HTTP does not work with '-C -', because curl
+8. Doing resumed upload over HTTP does not work with '-C -', because curl
   doesn't do a HEAD first to get the initial size. This needs to be done
   manually for HTTP PUT resume to work, and then '-C [index]'.
 
-* CURLOPT_USERPWD and CURLOPT_PROXYUSERPWD have no way of providing user names
+7. CURLOPT_USERPWD and CURLOPT_PROXYUSERPWD have no way of providing user names
   that contain a colon. This can't be fixed easily in a backwards compatible
   way without adding new options (and then, they should most probably allow
   setting user name and password separately).
 
-* libcurl ignores empty path parts in FTP URLs, whereas RFC1738 states that
+6. libcurl ignores empty path parts in FTP URLs, whereas RFC1738 states that
   such parts should be sent to the server as 'CWD ' (without an argument).
   The only exception to this rule, is that we knowingly break this if the
   empty part is first in the path, as then we use the double slashes to
   indicate that the user wants to reach the root dir (this exception SHALL
   remain even when this bug is fixed).
 
-* libcurl doesn't treat the content-length of compressed data properly, as
+5. libcurl doesn't treat the content-length of compressed data properly, as
   it seems HTTP servers send the *uncompressed* length in that header and
-  libcurl thinks of it as the *compressed* lenght. Some explanations are here:
+  libcurl thinks of it as the *compressed* length. Some explanations are here:
   http://curl.haxx.se/mail/lib-2003-06/0146.html
 
-* IPv6 support on AIX 4.3.3 doesn't work due to a missing sockaddr_storage
+4. IPv6 support on AIX 4.3.3 doesn't work due to a missing sockaddr_storage
   struct. It has been reported to work on AIX 5.1 though.
 
-* GOPHER transfers seem broken
+3. GOPHER transfers seem broken
 
-* If a HTTP server responds to a HEAD request and includes a body (thus
+2. If a HTTP server responds to a HEAD request and includes a body (thus
   violating the RFC2616), curl won't wait to read the response but just stop
   reading and return back. If a second request (let's assume a GET) is then
   immediately made to the same server again, the connection will be re-used
@@ -63,3 +91,7 @@ may have been fixed since this was written!
   and havoc is what happens.
   More details on this is found in this libcurl mailing list thread:
   http://curl.haxx.se/mail/lib-2002-08/0000.html
+
+1. LDAP support requires that not only the OpenLDAP shared libraries be
+   present at run time, but the development libraries (liblber.so and
+   libldap.so) as well (not applicable to Windows).

docs/TODO

@@ -36,6 +36,9 @@ TODO
  * Use 'struct lifreq' and SIOCGLIFADDR instead of 'struct ifreq' and
    SIOCGIFADDR on newer Solaris versions as they claim the latter is obsolete.
 
+ * Add the following to curl_easy_getinfo(): GET_HTTP_IP, GET_FTP_IP and
+   GET_FTP_DATA_IP. Return a string with the used IP. Suggested by Alan.
+
  LIBCURL - multi interface
 
  * Add a curl_multi_fdset() alternative that returns only two arrays with file
@@ -62,6 +65,12 @@ TODO
 
  FTP
 
+ * Make the detection of (bad) %0d and %0a codes in FTP url parts earlier in
+   the process to avoid doing a resolve and connect in vain.
+
+ * Code overhaul to make it more state-machine like and to _never_ block on
+   waiting for server responses when used with the multi interface.
+
  * Support GSS/Kerberos 5 for ftp file transfer. This will allow user
    authentication and file encryption.  Possible libraries and example clients
    are available from MIT or Heimdal. Requsted by Markus Moeller.
@@ -96,6 +105,10 @@ TODO
    This could possibly be implemented using the multi interface to queue
    requests and the response data.
 
+ * When doing CONNECT to a HTTP proxy, libcurl always uses HTTP/1.0. This has
+   never been reported as causing trouble to anyone, but should be considered
+   to use the HTTP version the user has chosen.
+
  TELNET
 
  * Reading input (to send to the remote server) on stdin is a crappy solution
@@ -148,6 +161,22 @@ TODO
    lib/ldap.c source file and get moved to the main network code so that the
    multi interface and friends will work for LDAP as well.
 
+ NEW PROTOCOLS
+
+ * TFTP - RFC1350 (protocol) and RFC3617 (URI format)
+
+   Dan Fandrich: I wrote a tftp protocol module as part of the I-Boot
+   bootloader under a BSD-style license with attribution clause
+   http://download.intrinsyc.com/supported/tools/i-boot-lite/i-boot-lite-1.8/src/libs/net/tftp.c
+
+ * RTSP - RFC2326 (protocol - very HTTP-like, also contains URL description)
+
+ * SFTP/SCP/SSH (no RFCs for protocol nor URI/URL format). An implementation
+   should most probably use an existing ssh library, such as OpenSSH.
+
+ * RSYNC (no RFCs for protocol nor URI/URL format).  An implementation should
+   most probably use an existing rsync library, such as librsync.
+
  CLIENT
 
  * "curl --sync http://example.com/feed[1-100].rss" or

docs/TheArtOfHttpScripting

@@ -1,4 +1,4 @@
-Online:  http://curl.haxx.se/docs/httpscripting.shtml
+Online:  http://curl.haxx.se/docs/httpscripting.html
 Date:    December 9, 2004
 
                 The Art Of Scripting HTTP Requests Using Curl

docs/curl-config.1

@@ -1,8 +1,27 @@
-.\" You can view this file with:
+.\" **************************************************************************
-.\" nroff -man curl-config.1
+.\" *                                  _   _ ____  _
-.\" Written by Daniel Stenberg
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" * $Id$
+.\" **************************************************************************
 .\"
-.TH curl-config 1 "11 Dec 2004" "Curl 7.10" "curl-config manual"
+.TH curl-config 1 "25 Jan 2004" "Curl 7.13.0" "curl-config manual"
 .SH NAME
 curl-config \- Get information about a libcurl installation
 .SH SYNOPSIS
@@ -32,6 +51,12 @@ to link your application with libcurl.
 This is the prefix used when libcurl was installed. Libcurl is then installed
 in $prefix/lib and its header files are installed in $prefix/include and so
 on. The prefix is set with "configure --prefix".
+.IP "--protocols"
+Lists what particular protocols the installed libcurl was built to support. At
+the time of writing, this list may include HTTP, HTTPS, FTP, FTPS, GOPHER,
+FILE, TELNET, LDAP, DICT. Do not assume any particular order. The protocols
+will be listed using uppercase and are separated by newlines. There may be
+none, one or several protocols in the list. (Added in 7.13.0)
 .IP "--version"
 Outputs version information about the installed libcurl.
 .IP "--vernum"

docs/curl.1

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl 1 "7 Dec 2004" "Curl 7.12.3" "Curl Manual"
+.TH curl 1 "25 Jan 2005" "Curl 7.13.0" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -120,9 +120,9 @@ using \fI-D/--dump-header\fP!
 If this option is set more than once, the last one will be the one that's
 used.
 .IP "-B/--use-ascii"
-Use ASCII transfer when getting an FTP file or LDAP info. For FTP, this can
+Enable ASCII transfer when using FTP or LDAP. For FTP, this can also be
-also be enforced by using an URL that ends with ";type=A". This option causes
+enforced by using an URL that ends with ";type=A". This option causes data
-data sent to stdout to be in text mode for win32 systems.
+sent to stdout to be in text mode for win32 systems.
 
 If this option is used twice, the second one will disable ASCII usage.
 .IP "--basic"
@@ -330,6 +330,12 @@ document stating so (which often also describes why and more). This flag will
 prevent curl from outputting that and fail silently instead.
 
 If this option is used twice, the second will again disable silent failure.
+.IP "--ftp-account [data]"
+(FTP) When an FTP server asks for "account data" after user name and password
+has been provided, this data is sent off using the ACCT command. (Added in
+7.13.0)
+
+If this option is used twice, the second will override the previous use.
 .IP "--ftp-create-dirs"
 (FTP) When an FTP URL/operation uses a path that doesn't currently exist on
 the server, the standard behavior of curl is to fail. Using this option, curl
@@ -622,6 +628,9 @@ dynamically.
 Write output to a local file named like the remote file we get. (Only the file
 part of the remote file is used, the path is cut off.)
 
+The remote file name to use for saving is extracted from the given URL.
+Nothing else
+
 You may use this option as many times as you have number of URLs.
 .IP "--pass <phrase>"
 (SSL) Pass phrase for the private key
@@ -677,9 +686,11 @@ If used as the first parameter on the command line, the \fI$HOME/.curlrc\fP
 file will not be read and used as a config file.
 .IP "-Q/--quote <comand>"
 (FTP) Send an arbitrary command to the remote FTP server. Quote commands are
-sent BEFORE the transfer is taking place. To make commands take place after a
+sent BEFORE the transfer is taking place (just after the initial PWD command
-successful transfer, prefix them with a dash '-'. You may specify any amount
+to be exact). To make commands take place after a successful transfer, prefix
-of commands to be run before and after the transfer. If the server returns
+them with a dash '-'. To make commands get sent after libcurl has changed
+working directory, just before the transfer command(s), prefix the command
+with '+'. You may specify any amount of commands. If the server returns
 failure for one of the commands, the entire operation will be aborted. You
 must send syntactically correct FTP commands as RFC959 defines.
 
@@ -842,7 +853,8 @@ to read for untrained humans.
 If this option is used several times, the last one will be used. (Added in
 7.9.7)
 .IP "-u/--user <user:password>"
-Specify user and password to use for server authentication.
+Specify user and password to use for server authentication. Overrides
+\fI-n/--netrc\fP and \fI--netrc-optional\fP.
 
 If this option is used several times, the last one will be used.
 .IP "-U/--proxy-user <user:password>"
@@ -931,6 +943,10 @@ to follow location: headers.
 .B http_code
 The numerical code that was found in the last retrieved HTTP(S) page.
 .TP
+.B http_connect
+The numerical code that was found in the last response (from a proxy) to a
+curl CONNECT request. (Added in 7.12.4)
+.TP
 .B time_total
 The total time, in seconds, that the full operation lasted. The time will be
 displayed with millisecond resolution.
@@ -1058,6 +1074,17 @@ Forces curl to use SSL version 2 when negotiating with a remote SSL server.
 .IP "-3/--sslv3"
 (HTTPS)
 Forces curl to use SSL version 3 when negotiating with a remote SSL server.
+.IP "--3p-quote"
+(FTP) Specify arbitrary commands to send to the source server. See the
+\fI-Q/--quote\fP option for details. (Added in 7.13.0)
+.IP "--3p-url"
+(FTP) Activates a FTP 3rd party transfer. Specifies the source URL to get a
+file from, while the "normal" URL will be used as target URL, the file that
+will be written/created.
+
+Note that not all FTP server allow 3rd party transfers. (Added in 7.13.0)
+.IP "--3p-user"
+(FTP) Specify user:password for the source URL transfer. (Added in 7.13.0)
 .IP "-4/--ipv4"
 If libcurl is capable of resolving an address to multiple IP versions (which
 it is if it is ipv6-capable), this option tells libcurl to resolve names to

docs/examples/Makefile.am

@@ -10,7 +10,7 @@ EXTRA_DIST = README curlgtk.c sepheaders.c simple.c postit2.c		\
  post-callback.c multi-app.c multi-double.c multi-single.c		\
  multi-post.c fopen.c simplepost.c makefile.dj curlx.c https.c		\
  multi-debugcallback.c fileupload.c getinfo.c ftp3rdparty.c debug.c	\
- anyauthput.c
+ anyauthput.c htmltitle.cc htmltidy.c
 
 all:
 	@echo "done"

docs/examples/README

@@ -44,6 +44,8 @@ ftpgetresp.c   - get the response strings from the FTP server
 ftpupload.c    - upload a file to a FTP server
 getinfo.c      - get the Content-Type from the recent transfer
 getinmemory.c  - download a file to memory only
+htmltitle.cc   - download a HTML file and extract the <title> tag from a HTML
+                 page using libxml
 http-post.c    - HTTP POST
 httpput.c      - HTTP PUT a local file
 https.c        - simple HTTPS transfer

docs/examples/ftp3rdparty.c

@@ -16,18 +16,16 @@
 
 /*
  * This is an example showing how to transfer a file between two remote hosts.
+ * 7.13.0 or later required.
  */
 
-
-
 int main(void)
 {
   CURL *curl;
   CURLcode res;
-  char sourceFileName[] = "/tmp/file";
+  char source_url[] = "ftp://remotehost.com/path/to/source";
-  char targetFileName[] = "/tmp/curlTargetTest.dat";
+  char target_url[] = "ftp://aotherserver.com/path/to/dest";
-  char sourceHost[] = "source";
+
-  char targetHost[] = "target";
   char sourceUserPass[] = "user:pass";
   char targetUserPass[] = "user:pass";
   char url[100];
@@ -42,21 +40,22 @@ int main(void)
 
   curl = curl_easy_init();
   if (curl) {
-    sprintf(url, "ftp://%s@%s/%s", targetUserPass, targetHost, targetFileName);
+    /* The ordinary URL is the target when speaking 3rd party transfers */
-    printf("%s\n", url);
+    curl_easy_setopt(curl, CURLOPT_URL, target_url);
-    curl_easy_setopt(curl, CURLOPT_URL, url);
 
-    /* Set a proxy host */
+    /* Set a source URL */
-    curl_easy_setopt(curl, CURLOPT_SOURCE_HOST, sourceHost);
+    curl_easy_setopt(curl, CURLOPT_SOURCE_URL, source_url);
 
-    /* Set a proxy user and password */
+    /* Set target user and password */
+    curl_easy_setopt(curl, CURLOPT_USERPWD, targetUserPass);
+
+    /* Set source user and password */
     curl_easy_setopt(curl, CURLOPT_SOURCE_USERPWD, sourceUserPass);
 
-    /* Set a proxy full file name */
+#if 0
-    curl_easy_setopt(curl, CURLOPT_SOURCE_PATH, sourceFileName);
+    /* FTPPORT enables PORT on the target side, instead of PASV. */
-
+    curl_easy_setopt(curl, CURLOPT_FTPPORT, "");   /* optional */
-    /* Set a proxy passive host */
+#endif
-    curl_easy_setopt(curl, CURLOPT_PASV_HOST, 0);   /* optional */
 
     /* build a list of commands to pass to libcurl */
     source_pre_cmd = curl_slist_append(source_pre_cmd, cmd);

docs/examples/ftpupload.c

@@ -78,8 +78,12 @@ int main(int argc, char **argv)
        DLL may not use the variable's memory when passed in to it from an app
        like this. */
 
-    /* and give the size of the upload (optional) */
+    /* Set the size of the file to upload (optional).  If you give a *_LARGE
-    curl_easy_setopt(curl, CURLOPT_INFILESIZE_LARGE, file_info.st_size);
+       option you MUST make sure that the type of the passed-in argument is a
+       curl_off_t. If you use CURLOPT_INFILESIZE (without _LARGE) you must
+       make sure that to pass in a type 'long' argument. */
+    curl_easy_setopt(curl, CURLOPT_INFILESIZE_LARGE,
+                     (curl_off_t)file_info.st_size);
 
     /* Now run off and do what you've been told! */
     res = curl_easy_perform(curl);

docs/examples/getinmemory.c

@@ -37,7 +37,7 @@ void *myrealloc(void *ptr, size_t size)
 size_t
 WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
 {
-  register int realsize = size * nmemb;
+  size_t realsize = size * nmemb;
   struct MemoryStruct *mem = (struct MemoryStruct *)data;
 
   mem->memory = (char *)myrealloc(mem->memory, mem->size + realsize + 1);

docs/examples/htmltidy.c

@@ -0,0 +1,118 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ *
+ * Download a document and use libtidy to parse the HTML.
+ * Written by Jeff Pohlmeyer
+ *
+ * LibTidy => http://tidy.sourceforge.net
+ *
+ * gcc -Wall -I/usr/local/include tidycurl.c -lcurl -ltidy -o tidycurl
+ *
+ */
+
+#include <stdio.h>
+#include <tidy/tidy.h>
+#include <tidy/buffio.h>
+#include <curl/curl.h>
+
+/* curl write callback, to fill tidy's input buffer...  */
+uint write_cb(char *in, uint size, uint nmemb, TidyBuffer *out)
+{
+  uint r;
+  r = size * nmemb;
+  tidyBufAppend( out, in, r );
+  return(r);
+}
+
+/* Traverse the document tree */
+void dumpNode(TidyDoc doc, TidyNode tnod, int indent )
+{
+  TidyNode child;
+  for ( child = tidyGetChild(tnod); child; child = tidyGetNext(child) )
+  {
+    ctmbstr name = tidyNodeGetName( child );
+    if ( name )
+    {
+      /* if it has a name, then it's an HTML tag ... */
+      TidyAttr attr;
+      printf( "%*.*s%s ", indent, indent, "<", name);
+      /* walk the attribute list */
+      for ( attr=tidyAttrFirst(child); attr; attr=tidyAttrNext(attr) ) {
+        printf(tidyAttrName(attr));
+        tidyAttrValue(attr)?printf("=\"%s\" ",
+                                   tidyAttrValue(attr)):printf(" ");
+      }
+      printf( ">\n");
+    }
+    else {
+      /* if it doesn't have a name, then it's probably text, cdata, etc... */
+      TidyBuffer buf;
+      tidyBufInit(&buf);
+      tidyNodeGetText(doc, child, &buf);
+      printf("%*.*s\n", indent, indent, buf.bp?(char *)buf.bp:"");
+      tidyBufFree(&buf);
+    }
+    dumpNode( doc, child, indent + 4 ); /* recursive */
+  }
+}
+
+
+int main(int argc, char **argv )
+{
+  CURL *curl;
+  char curl_errbuf[CURL_ERROR_SIZE];
+  TidyDoc tdoc;
+  TidyBuffer docbuf = {0};
+  TidyBuffer tidy_errbuf = {0};
+  int err;
+  if ( argc == 2) {
+    curl = curl_easy_init();
+    curl_easy_setopt(curl, CURLOPT_URL, argv[1]);
+    curl_easy_setopt(curl, CURLOPT_ERRORBUFFER, curl_errbuf);
+    curl_easy_setopt(curl, CURLOPT_NOPROGRESS, no);
+    curl_easy_setopt(curl, CURLOPT_VERBOSE, yes);
+    curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, write_cb);
+
+    tdoc = tidyCreate();
+    tidyOptSetBool(tdoc, TidyForceOutput, yes); /* try harder */
+    tidyOptSetInt(tdoc, TidyWrapLen, 4096);
+    tidySetErrorBuffer( tdoc, &tidy_errbuf );
+    tidyBufInit(&docbuf);
+
+    curl_easy_setopt(curl, CURLOPT_WRITEDATA, &docbuf);
+    err=curl_easy_perform(curl);
+    if ( !err ) {
+      err = tidyParseBuffer(tdoc, &docbuf); /* parse the input */
+      if ( err >= 0 ) {
+        err = tidyCleanAndRepair(tdoc); /* fix any problems */
+        if ( err >= 0 ) {
+          err = tidyRunDiagnostics(tdoc); /* load tidy error buffer */
+          if ( err >= 0 ) {
+            dumpNode( tdoc, tidyGetRoot(tdoc), 0 ); /* walk the tree */
+            fprintf(stderr, "%s\n", tidy_errbuf.bp); /* show errors */
+          }
+        }
+      }
+    }
+    else
+      fprintf(stderr, "%s\n", curl_errbuf);
+
+    /* clean-up */
+    curl_easy_cleanup(curl);
+    tidyBufFree(&docbuf);
+    tidyBufFree(&tidy_errbuf);
+    tidyRelease(tdoc);
+    return(err);
+
+  }
+  else
+    printf( "usage: %s <url>\n", argv[0] );
+
+  return(0);
+}

docs/examples/htmltitle.cc

@@ -0,0 +1,301 @@
+/*****************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * $Id$
+ */
+
+// Get a web page, parse it with libxml.
+//
+// Written by Lars Nilsson
+//
+// GNU C++ compile command line suggestion (edit paths accordingly):
+//
+// g++ -Wall -I/opt/curl/include -I/opt/libxml/include/libxml2 htmltitle.cc \
+// -o htmltitle -L/opt/curl/lib -L/opt/libxml/lib -lcurl -lxml2
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <string>
+#include <curl/curl.h>
+#include <libxml/HTMLparser.h>
+
+//
+//  Case-insensitive string comparison
+//
+
+#ifdef _MSC_VER
+#define COMPARE(a, b) (!stricmp((a), (b)))
+#else
+#define COMPARE(a, b) (!strcasecmp((a), (b)))
+#endif
+
+//
+//  libxml callback context structure
+//
+
+struct Context
+{
+  Context(): addTitle(false) { }
+
+  bool addTitle;
+  std::string title;
+};
+
+//
+//  libcurl variables for error strings and returned data
+
+static char errorBuffer[CURL_ERROR_SIZE];
+static std::string buffer;
+
+//
+//  libcurl write callback function
+//
+
+static int writer(char *data, size_t size, size_t nmemb,
+                  std::string *writerData)
+{
+  if (writerData == NULL)
+    return 0;
+
+  writerData->append(data, size*nmemb);
+
+  return size * nmemb;
+}
+
+//
+//  libcurl connection initialization
+//
+
+static bool init(CURL *&conn, char *url)
+{
+  CURLcode code;
+
+  conn = curl_easy_init();
+
+  if (conn == NULL)
+  {
+    fprintf(stderr, "Failed to create CURL connection\n");
+
+    exit(EXIT_FAILURE);
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_ERRORBUFFER, errorBuffer);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set error buffer [%d]\n", code);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_URL, url);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set URL [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_FOLLOWLOCATION, 1);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set redirect option [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_WRITEFUNCTION, writer);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set writer [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  code = curl_easy_setopt(conn, CURLOPT_WRITEDATA, &buffer);
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to set write data [%s]\n", errorBuffer);
+
+    return false;
+  }
+
+  return true;
+}
+
+//
+//  libxml start element callback function
+//
+
+static void startElement(void *voidContext,
+                         const xmlChar *name,
+                         const xmlChar **attributes)
+{
+  Context *context = (Context *)voidContext;
+
+  if (COMPARE((char *)name, "TITLE"))
+  {
+    context->title = "";
+    context->addTitle = true;
+  }
+}
+
+//
+//  libxml end element callback function
+//
+
+static void endElement(void *voidContext,
+                       const xmlChar *name)
+{
+  Context *context = (Context *)voidContext;
+
+  if (COMPARE((char *)name, "TITLE"))
+    context->addTitle = false;
+}
+
+//
+//  Text handling helper function
+//
+
+static void handleCharacters(Context *context,
+                             const xmlChar *chars,
+                             int length)
+{
+  if (context->addTitle)
+    context->title.append((char *)chars, length);
+}
+
+//
+//  libxml PCDATA callback function
+//
+
+static void characters(void *voidContext,
+                       const xmlChar *chars,
+                       int length)
+{
+  Context *context = (Context *)voidContext;
+
+  handleCharacters(context, chars, length);
+}
+
+//
+//  libxml CDATA callback function
+//
+
+static void cdata(void *voidContext,
+                  const xmlChar *chars,
+                  int length)
+{
+  Context *context = (Context *)voidContext;
+
+  handleCharacters(context, chars, length);
+}
+
+//
+//  libxml SAX callback structure
+//
+
+static htmlSAXHandler saxHandler =
+{
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  startElement,
+  endElement,
+  NULL,
+  characters,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  NULL,
+  cdata,
+  NULL
+};
+
+//
+//  Parse given (assumed to be) HTML text and return the title
+//
+
+static void parseHtml(const std::string &html,
+                      std::string &title)
+{
+  htmlParserCtxtPtr ctxt;
+  Context context;
+
+  ctxt = htmlCreatePushParserCtxt(&saxHandler, &context, "", 0, "",
+                                  XML_CHAR_ENCODING_NONE);
+
+  htmlParseChunk(ctxt, html.c_str(), html.size(), 0);
+  htmlParseChunk(ctxt, "", 0, 1);
+
+  htmlFreeParserCtxt(ctxt);
+
+  title = context.title;
+}
+
+int main(int argc, char *argv[])
+{
+  CURL *conn = NULL;
+  CURLcode code;
+  std::string title;
+
+  // Ensure one argument is given
+
+  if (argc != 2)
+  {
+    fprintf(stderr, "Usage: %s <url>\n", argv[0]);
+
+    exit(EXIT_FAILURE);
+  }
+
+  curl_global_init(CURL_GLOBAL_DEFAULT);
+
+  // Initialize CURL connection
+
+  if (!init(conn, argv[1]))
+  {
+    fprintf(stderr, "Connection initializion failed\n");
+
+    exit(EXIT_FAILURE);
+  }
+
+  // Retrieve content for the URL
+
+  code = curl_easy_perform(conn);
+  curl_easy_cleanup(conn);
+
+  if (code != CURLE_OK)
+  {
+    fprintf(stderr, "Failed to get '%s' [%s]\n", argv[1], errorBuffer);
+
+    exit(EXIT_FAILURE);
+  }
+
+  // Parse the (assumed) HTML code
+
+  parseHtml(buffer, title);
+
+  // Display the extracted title
+
+  printf("Title: %s\n", title.c_str());
+
+  return EXIT_SUCCESS;
+}

docs/examples/httpput.c

@@ -19,6 +19,9 @@
  * line argument to the URL also given on the command line.
  *
  * This example also uses its own read callback.
+ *
+ * Here's an article on how to setup a PUT handler for Apache:
+ * http://www.apacheweek.com/features/put
  */
 
 size_t read_callback(void *ptr, size_t size, size_t nmemb, void *stream)

docs/libcurl/Makefile.am

@@ -52,7 +52,7 @@ PDFPAGES = curl_easy_cleanup.pdf curl_easy_getinfo.pdf			\
 
 CLEANFILES = $(HTMLPAGES) $(PDFPAGES)
 
-EXTRA_DIST = $(man_MANS) $(HTMLPAGES) index.html $(PDFPAGES)
+EXTRA_DIST = $(man_MANS) $(HTMLPAGES) index.html $(PDFPAGES) libcurl.m4
 
 MAN2HTML= roffit --mandir=. < $< >$@
 

docs/libcurl/curl_easy_getinfo.3

@@ -2,7 +2,7 @@
 .\" nroff -man [file]
 .\" $Id$
 .\"
-.TH curl_easy_getinfo 3 "14 Dec 2004" "libcurl 7.12.3" "libcurl Manual"
+.TH curl_easy_getinfo 3 "22 Dec 2004" "libcurl 7.12.3" "libcurl Manual"
 .SH NAME
 curl_easy_getinfo - extract information from a curl handle
 .SH SYNOPSIS
@@ -27,7 +27,13 @@ The following information can be extracted:
 Pass a pointer to a 'char *' to receive the last used effective URL.
 .IP CURLINFO_RESPONSE_CODE
 Pass a pointer to a long to receive the last received HTTP or FTP code. This
-option was known as CURLINFO_HTTP_CODE in libcurl 7.10.7 and earlier.
+option was known as CURLINFO_HTTP_CODE in libcurl 7.10.7 and earlier. This
+will be zero if no server response code has been received. Note that a proxy's
+CONNECT response should be read with \fICURLINFO_HTTP_CONNECTCODE\fP and not
+this.
+.IP CURLINFO_HTTP_CONNECTCODE
+Pass a pointer to a long to receive the last received proxy response code to a
+CONNECT request.
 .IP CURLINFO_FILETIME
 Pass a pointer to a long to receive the remote time of the retrieved
 document. If you get -1, it can be because of many reasons (unknown, the

docs/libcurl/curl_easy_setopt.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH curl_easy_setopt 3 "29 Nov 2004" "libcurl 7.12.3" "libcurl Manual"
+.TH curl_easy_setopt 3 "25 Jan 2005" "libcurl 7.13.0" "libcurl Manual"
 .SH NAME
 curl_easy_setopt - set options for a curl easy handle
 .SH SYNOPSIS
@@ -543,11 +543,10 @@ data to figure out the size. This is the large file version of the
 .IP CURLOPT_HTTPPOST
 Tells libcurl you want a multipart/formdata HTTP POST to be made and you
 instruct what data to pass on to the server.  Pass a pointer to a linked list
-of HTTP post structs as parameter.  The linked list should be a fully valid
+of curl_httppost structs as parameter. . The easiest way to create such a
-list of 'struct HttpPost' structs properly filled in. The best and most
+list, is to use \fIcurl_formadd(3)\fP as documented. The data in this list
-elegant way to do this, is to use \fIcurl_formadd(3)\fP as documented. The
+must remain intact until you close this curl handle again with
-data in this list must remain intact until you close this curl handle again
+\fIcurl_easy_cleanup(3)\fP.
-with \fIcurl_easy_cleanup(3)\fP.
 
 Using POST with HTTP 1.1 implies the use of a "Expect: 100-continue" header.
 You can disable this header with \fICURLOPT_HTTPHEADER\fP as usual.
@@ -752,6 +751,22 @@ Try "AUTH SSL" first, and only if that fails try "AUTH TLS"
 .IP CURLFTPAUTH_TLS
 Try "AUTH TLS" first, and only if that fails try "AUTH SSL"
 .RE
+.IP CURLOPT_SOURCE_URL
+When set, it enables a FTP third party transfer, using the set URL as source,
+while \fICURLOPT_URL\fP is the target.
+.IP CURLOPT_SOURCE_USERPWD
+Set "username:password" to use for the source connection when doing FTP third
+party transfers.
+.IP CURLOPT_SOURCE_QUOTE
+Exactly like \fICURLOPT_QUOTE\fP, but for the source host.
+.IP CURLOPT_SOURCE_PREQUOTE
+Exactly like \fICURLOPT_PREQUOTE\fP, but for the source host.
+.IP CURLOPT_SOURCE_POSTQUOTE
+Exactly like \fICURLOPT_POSTQUOTE\fP, but for the source host.
+.IP CURLOPT_FTP_ACCOUNT
+Pass a pointer to a zero-terminated string (or NULL to disable). When an FTP
+server asks for "account data" after user name and password has been provided,
+this data is sent off using the ACCT command. (Added in 7.13.0)
 .SH PROTOCOL OPTIONS
 .IP CURLOPT_TRANSFERTEXT
 A non-zero parameter tells the library to use ASCII mode for ftp transfers,

docs/libcurl/curl_multi_fdset.3

@@ -16,13 +16,9 @@ CURLMcode curl_multi_fdset(CURLM *multi_handle,
 .SH DESCRIPTION
 This function extracts file descriptor information from a given multi_handle.
 libcurl returns its fd_set sets. The application can use these to select()
-on. The \fIcurl_multi_perform(3)\fI function should be called as soon as one
+on. The \fIcurl_multi_perform(3)\fP function should be called as soon as one
 of them are ready to be read from or written to.
 
-NOTE that once this call is made, you must not remove the sets you point to,
-as libcurl will need to be able to read them. It needs them after select()
-calls, to know if certain sockets are readable or writable.
-
 You should also be aware that when doing select(), you should consider using a
 rather small (single-digit number of seconds) timeout and call
 \fIcurl_multi_perform\fP regularly - even if no activity has been seen on the

docs/libcurl/libcurl-tutorial.3

@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -21,7 +21,7 @@
 .\" * $Id$
 .\" **************************************************************************
 .\"
-.TH libcurl-tutorial 3 "18 Jun 2004" "libcurl" "libcurl programming"
+.TH libcurl-tutorial 3 "25 Jan 2005" "libcurl" "libcurl programming"
 .SH NAME
 libcurl-tutorial \- libcurl programming tutorial
 .SH "Objective"
@@ -76,6 +76,11 @@ possibly together with a few other features that can be on and off on
 different libcurls.
 
 See also the "Features libcurl Provides" further down.
+.IP "autoconf macro"
+When you write your configure script to detect libcurl and setup variables
+accordingly, we offer a prewritten macro that probably does everything you
+need in this area. See docs/libcurl/libcurl.m4 file - it includes docs on how
+to use it.
 
 .SH "Portable Code in a Portable World"
 The people behind libcurl have put a considerable effort to make libcurl work
@@ -94,9 +99,9 @@ use the library. Once for your program's entire life time. This is done using
  curl_global_init()
 
 and it takes one parameter which is a bit pattern that tells libcurl what to
-initialize. Using CURL_GLOBAL_ALL will make it initialize all known internal
+initialize. Using \fICURL_GLOBAL_ALL\fP will make it initialize all known
-sub modules, and might be a good default option. The current two bits that
+internal sub modules, and might be a good default option. The current two bits
-are specified are:
+that are specified are:
 .RS
 .IP "CURL_GLOBAL_WIN32"
 which only does anything on Windows machines. When used on
@@ -113,17 +118,19 @@ application so if your program or another library already does this, this
 bit should not be needed.
 .RE
 
-libcurl has a default protection mechanism that detects if curl_global_init()
+libcurl has a default protection mechanism that detects if
-hasn't been called by the time curl_easy_perform() is called and if that is
+\fIcurl_global_init(3)\fP hasn't been called by the time
-the case, libcurl runs the function itself with a guessed bit pattern. Please
+\fIcurl_easy_perform(3)\fP is called and if that is the case, libcurl runs the
-note that depending solely on this is not considered nice nor very good.
+function itself with a guessed bit pattern. Please note that depending solely
+on this is not considered nice nor very good.
 
-When the program no longer uses libcurl, it should call curl_global_cleanup(),
+When the program no longer uses libcurl, it should call
-which is the opposite of the init call. It will then do the reversed
+\fIcurl_global_cleanup(3)\fP, which is the opposite of the init call. It will
-operations to cleanup the resources the curl_global_init() call initialized.
+then do the reversed operations to cleanup the resources the
+\fIcurl_global_init(3)\fP call initialized.
 
-Repeated calls to curl_global_init() and curl_global_cleanup() should be
+Repeated calls to \fIcurl_global_init(3)\fP and \fIcurl_global_cleanup(3)\fP
-avoided. They should only be called once each.
+should be avoided. They should only be called once each.
 
 .SH "Features libcurl Provides"
 It is considered best-practice to determine libcurl features run-time rather
@@ -153,17 +160,18 @@ It returns an easy handle. Using that you proceed to the next step: setting
 up your preferred actions. A handle is just a logic entity for the upcoming
 transfer or series of transfers.
 
-You set properties and options for this handle using curl_easy_setopt(). They
+You set properties and options for this handle using
-control how the subsequent transfer or transfers will be made. Options remain
+\fIcurl_easy_setopt(3)\fP. They control how the subsequent transfer or
-set in the handle until set again to something different. Alas, multiple
+transfers will be made. Options remain set in the handle until set again to
-requests using the same handle will use the same options.
+something different. Alas, multiple requests using the same handle will use
+the same options.
 
 Many of the options you set in libcurl are "strings", pointers to data
 terminated with a zero byte. Keep in mind that when you set strings with
-curl_easy_setopt(), libcurl will not copy the data. It will merely point to
+\fIcurl_easy_setopt(3)\fP, libcurl will not copy the data. It will merely
-the data. You MUST make sure that the data remains available for libcurl to
+point to the data. You MUST make sure that the data remains available for
-use until finished or until you use the same option again to point to
+libcurl to use until finished or until you use the same option again to point
-something else.
+to something else.
 
 One of the most basic properties to set in the handle is the URL. You set
 your preferred URL to transfer with CURLOPT_URL in a manner similar to:
@@ -188,41 +196,44 @@ similar to this:
 You can control what data your function get in the forth argument by setting
 another property:
 
-    curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct);
+ curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct);
 
 Using that property, you can easily pass local data between your application
 and the function that gets invoked by libcurl. libcurl itself won't touch the
-data you pass with CURLOPT_WRITEDATA.
+data you pass with \fICURLOPT_WRITEDATA\fP.
 
 libcurl offers its own default internal callback that'll take care of the data
-if you don't set the callback with CURLOPT_WRITEFUNCTION. It will then simply
+if you don't set the callback with \fICURLOPT_WRITEFUNCTION\fP. It will then
-output the received data to stdout. You can have the default callback write
+simply output the received data to stdout. You can have the default callback
-the data to a different file handle by passing a 'FILE *' to a file opened for
+write the data to a different file handle by passing a 'FILE *' to a file
-writing with the CURLOPT_WRITEDATA option.
+opened for writing with the \fICURLOPT_WRITEDATA\fP option.
 
 Now, we need to take a step back and have a deep breath. Here's one of those
 rare platform-dependent nitpicks. Did you spot it? On some platforms[2],
 libcurl won't be able to operate on files opened by the program. Thus, if you
-use the default callback and pass in a an open file with CURLOPT_WRITEDATA, it
+use the default callback and pass in a an open file with
-will crash. You should therefore avoid this to make your program run fine
+\fICURLOPT_WRITEDATA\fP, it will crash. You should therefore avoid this to
-virtually everywhere.
+make your program run fine virtually everywhere.
 
-(CURLOPT_WRITEDATA was formerly known as CURLOPT_FILE. Both names still work
+(\fICURLOPT_WRITEDATA\fP was formerly known as \fICURLOPT_FILE\fP. Both names
-and do the same thing).
+still work and do the same thing).
+
+If you're using libcurl as a win32 DLL, you MUST use the
+\fICURLOPT_WRITEFUNCTION\fP if you set \fICURLOPT_WRITEDATA\fP - or you will
+experience crashes.
 
 There are of course many more options you can set, and we'll get back to a few
 of them later. Let's instead continue to the actual transfer:
 
  success = curl_easy_perform(easyhandle);
 
-The \fIcurl_easy_perform(3)\fP will connect to the remote site, do the
+\fIcurl_easy_perform(3)\fP will connect to the remote site, do the necessary
-necessary commands and receive the transfer. Whenever it receives data, it
+commands and receive the transfer. Whenever it receives data, it calls the
-calls the callback function we previously set. The function may get one byte
+callback function we previously set. The function may get one byte at a time,
-at a time, or it may get many kilobytes at once. libcurl delivers as much as
+or it may get many kilobytes at once. libcurl delivers as much as possible as
-possible as often as possible. Your callback function should return the number
+often as possible. Your callback function should return the number of bytes it
-of bytes it "took care of". If that is not the exact same amount of bytes that
+\&"took care of". If that is not the exact same amount of bytes that was
-was passed to it, libcurl will abort the operation and return with an error
+passed to it, libcurl will abort the operation and return with an error code.
-code.
 
 When the transfer is complete, the function returns a return code that informs
 you if it succeeded in its mission or not. If a return code isn't enough for
@@ -236,12 +247,12 @@ previous
 
 .SH "Multi-threading Issues"
 libcurl is completely thread safe, except for two issues: signals and alarm
-handlers. Signals are needed for a SIGPIPE handler, and the alarm() Bacall
+handlers. Signals are needed for a SIGPIPE handler, and the alarm() call is
-is used to catch timeouts (mostly during ENS lookup).
+used to deal with timeouts (during DNS lookup).
 
 If you are accessing HTTPS or FTPS URLs in a multi-threaded manner, you are
 then of course using OpenSSL multi-threaded and it has itself a few
-requirements on this. Basilio, you need to provide one or two functions to
+requirements on this. Basically, you need to provide one or two functions to
 allow it to function properly. For all details, see this:
 
  http://www.openssl.org/docs/crypto/threads.html#DESCRIPTION
@@ -322,12 +333,12 @@ CURLOPT_INFILESIZE_LARGE for all known file sizes like this[1]:
  curl_easy_setopt(easyhandle, CURLOPT_INFILESIZE_LARGE, file_size);
 .fi
 
-When you call curl_easy_perform() this time, it'll perform all the necessary
+When you call \fIcurl_easy_perform(3)\fP this time, it'll perform all the
-operations and when it has invoked the upload it'll call your supplied
+necessary operations and when it has invoked the upload it'll call your
-callback to get the data to upload. The program should return as much data as
+supplied callback to get the data to upload. The program should return as much
-possible in every invoke, as that is likely to make the upload perform as
+data as possible in every invoke, as that is likely to make the upload perform
-fast as possible. The callback should return the number of bytes it wrote in
+as fast as possible. The callback should return the number of bytes it wrote
-the buffer. Returning 0 will signal the end of the upload.
+in the buffer. Returning 0 will signal the end of the upload.
 
 .SH "Passwords"
 Many protocols use or even require that user name and password are provided
@@ -466,15 +477,14 @@ then passing that list to libcurl.
 
 While the simple examples above cover the majority of all cases where HTTP
 POST operations are required, they don't do multi-part formposts. Multi-part
-formposts were introduced as a better way to post (possibly large) binary
+formposts were introduced as a better way to post (possibly large) binary data
-data and was first documented in the RFC1867. They're called multi-part
+and was first documented in the RFC1867. They're called multi-part because
-because they're built by a chain of parts, each being a single unit. Each
+they're built by a chain of parts, each being a single unit. Each part has its
-part has its own name and contents. You can in fact create and post a
+own name and contents. You can in fact create and post a multi-part formpost
-multi-part formpost with the regular libcurl POST support described above, but
+with the regular libcurl POST support described above, but that would require
-that would require that you build a formpost yourself and provide to
+that you build a formpost yourself and provide to libcurl. To make that
-libcurl. To make that easier, libcurl provides curl_formadd(). Using this
+easier, libcurl provides \fIcurl_formadd(3)\fP. Using this function, you add
-function, you add parts to the form. When you're done adding parts, you post
+parts to the form. When you're done adding parts, you post the whole form.
-the whole form.
 
 The following example sets two simple text parts with plain textual contents,
 and then a file with binary contents and upload the whole thing.
@@ -527,10 +537,10 @@ post handle:
 .fi
 
 Since all options on an easyhandle are "sticky", they remain the same until
-changed even if you do call curl_easy_perform(), you may need to tell curl to
+changed even if you do call \fIcurl_easy_perform(3)\fP, you may need to tell
-go back to a plain GET request if you intend to do such a one as your next
+curl to go back to a plain GET request if you intend to do such a one as your
-request. You force an easyhandle to back to GET by using the CURLOPT_HTTPGET
+next request. You force an easyhandle to back to GET by using the
-option:
+CURLOPT_HTTPGET option:
 
  curl_easy_setopt(easyhandle, CURLOPT_HTTPGET, TRUE);
 
@@ -719,7 +729,7 @@ Mozilla javascript engine in the past.
 Re-cycling the same easy handle several times when doing multiple requests is
 the way to go.
 
-After each single curl_easy_perform() operation, libcurl will keep the
+After each single \fIcurl_easy_perform(3)\fP operation, libcurl will keep the
 connection alive and open. A subsequent request using the same easy handle to
 the same host might just be able to use the already open connection! This
 reduces network impact a lot.
@@ -903,8 +913,8 @@ A little example that deletes a given file before an operation:
 .fi
 
 If you would instead want this operation (or chain of operations) to happen
-_after_ the data transfer took place the option to curl_easy_setopt() would
+_after_ the data transfer took place the option to \fIcurl_easy_setopt(3)\fP
-instead be called CURLOPT_POSTQUOTE and used the exact same way.
+would instead be called CURLOPT_POSTQUOTE and used the exact same way.
 
 The custom FTP command will be issued to the server in the same order they are
 added to the list, and if a command gets an error code returned back from the
@@ -973,9 +983,9 @@ The perhaps most advanced cookie operation libcurl offers, is saving the
 entire internal cookie state back into a Netscape/Mozilla formatted cookie
 file. We call that the cookie-jar. When you set a file name with
 CURLOPT_COOKIEJAR, that file name will be created and all received cookies
-will be stored in it when curl_easy_cleanup() is called. This enabled cookies
+will be stored in it when \fIcurl_easy_cleanup(3)\fP is called. This enabled
-to get passed on properly between multiple handles without any information
+cookies to get passed on properly between multiple handles without any
-getting lost.
+information getting lost.
 
 .SH "FTP Peculiarities We Need"
 
@@ -1103,46 +1113,47 @@ of how to use the easy interface. The multi interface is simply a way to make
 multiple transfers at the same time, by adding up multiple easy handles in to
 a "multi stack".
 
-You create the easy handles you want and you set all the options just like
+You create the easy handles you want and you set all the options just like you
-you have been told above, and then you create a multi handle with
+have been told above, and then you create a multi handle with
-curl_multi_init() and add all those easy handles to that multi handle with
+\fIcurl_multi_init(3)\fP and add all those easy handles to that multi handle
-curl_multi_add_handle().
+with \fIcurl_multi_add_handle(3)\fP.
 
 When you've added the handles you have for the moment (you can still add new
-ones at any time), you start the transfers by call curl_multi_perform().
+ones at any time), you start the transfers by call
+\fIcurl_multi_perform(3)\fP.
 
-curl_multi_perform() is asynchronous. It will only execute as little as
+\fIcurl_multi_perform(3)\fP is asynchronous. It will only execute as little as
-possible and then return back control to your program. It is designed to
+possible and then return back control to your program. It is designed to never
-never block. If it returns CURLM_CALL_MULTI_PERFORM you better call it again
+block. If it returns CURLM_CALL_MULTI_PERFORM you better call it again soon,
-soon, as that is a signal that it still has local data to send or remote data
+as that is a signal that it still has local data to send or remote data to
-to receive.
+receive.
 
 The best usage of this interface is when you do a select() on all possible
 file descriptors or sockets to know when to call libcurl again. This also
-makes it easy for you to wait and respond to actions on your own
+makes it easy for you to wait and respond to actions on your own application's
-application's sockets/handles. You figure out what to select() for by using
+sockets/handles. You figure out what to select() for by using
-curl_multi_fdset(), that fills in a set of fd_set variables for you with the
+\fIcurl_multi_fdset(3)\fP, that fills in a set of fd_set variables for you
-particular file descriptors libcurl uses for the moment.
+with the particular file descriptors libcurl uses for the moment.
 
 When you then call select(), it'll return when one of the file handles signal
-action and you then call curl_multi_perform() to allow libcurl to do what it
+action and you then call \fIcurl_multi_perform(3)\fP to allow libcurl to do
-wants to do. Take note that libcurl does also feature some time-out code so
+what it wants to do. Take note that libcurl does also feature some time-out
-we advice you to never use very long timeouts on select() before you call
+code so we advice you to never use very long timeouts on select() before you
-curl_multi_perform(), which thus should be called unconditionally every now
+call \fIcurl_multi_perform(3)\fP, which thus should be called unconditionally
-and then even if none of its file descriptors have signaled ready. Another
+every now and then even if none of its file descriptors have signaled
-precaution you should use: always call curl_multi_fdset() immediately before
+ready. Another precaution you should use: always call
-the select() call since the current set of file descriptors may change when
+\fIcurl_multi_fdset(3)\fP immediately before the select() call since the
-calling a curl function.
+current set of file descriptors may change when calling a curl function.
 
 If you want to stop the transfer of one of the easy handles in the stack, you
-can use curl_multi_remove_handle() to remove individual easy
+can use \fIcurl_multi_remove_handle(3)\fP to remove individual easy
-handles. Remember that easy handles should be curl_easy_cleanup()ed.
+handles. Remember that easy handles should be \fIcurl_easy_cleanup(3)\fPed.
 
 When a transfer within the multi stack has finished, the counter of running
-transfers (as filled in by curl_multi_perform()) will decrease. When the
+transfers (as filled in by \fIcurl_multi_perform(3)\fP) will decrease. When
-number reaches zero, all transfers are done.
+the number reaches zero, all transfers are done.
 
-curl_multi_info_read() can be used to get information about completed
+\fIcurl_multi_info_read(3)\fP can be used to get information about completed
 transfers. It then returns the CURLcode for each easy transfer, to allow you
 to figure out success on each individual transfer.
 

docs/libcurl/libcurl.m4

@@ -0,0 +1,209 @@
+# LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION],
+#                       [ACTION-IF-YES], [ACTION-IF-NO])
+# ----------------------------------------------------------
+#      David Shaw <dshaw@jabberwocky.com>   Jan-23-2005
+#
+# Checks for libcurl.  DEFAULT-ACTION is the string yes or no to
+# specify whether to default to --with-libcurl or --without-libcurl.
+# If not supplied, DEFAULT-ACTION is yes.  MINIMUM-VERSION is the
+# minimum version of libcurl to accept.  Pass the version as a regular
+# version number like 7.10.1. If not supplied, any version is
+# accepted.  ACTION-IF-YES is a list of shell commands to run if
+# libcurl was successfully found and passed the various tests.
+# ACTION-IF-NO is a list of shell commands that are run otherwise.
+# Note that using --without-libcurl does run ACTION-IF-NO.
+#
+# This macro defines HAVE_LIBCURL if a working libcurl setup is found,
+# and sets @LIBCURL@ and @LIBCURL_CPPFLAGS@ to the necessary values.
+# Other useful defines are LIBCURL_FEATURE_xxx where xxx are the
+# various features supported by libcurl, and LIBCURL_PROTOCOL_yyy
+# where yyy are the various protocols supported by libcurl.  Both xxx
+# and yyy are capitalized.  See the list of AH_TEMPLATEs at the top of
+# the macro for the complete list of possible defines.  Shell
+# variables $libcurl_feature_xxx and $libcurl_protocol_yyy are also
+# defined to 'yes' for those features and protocols that were found.
+# Note that xxx and yyy keep the same capitalization as in the
+# curl-config list (e.g. it's "HTTP" and not "http").
+#
+# Users may override the detected values by doing something like:
+# LIBCURL="-lcurl" LIBCURL_CPPFLAGS="-I/usr/myinclude" ./configure
+#
+# For the sake of sanity, this macro assumes that any libcurl that is
+# found is after version 7.7.2, the first version that included the
+# curl-config script.  Note that it is very important for people
+# packaging binary versions of libcurl to include this script!
+# Without curl-config, we can only make educated guesses as to what
+# protocols are available.  Specifically, we assume that all of HTTP,
+# FTP, GOPHER, FILE, TELNET, LDAP, and DICT exist, and (if SSL exists)
+# HTTPS is present.  All of these protocols existed when libcurl was
+# first created in version 7, so this is a safe assumption.  If the
+# version is 7.11.0 or later, FTPS is assumed to be present as well.
+# FTPS existed before then, but was not yet fully standards compliant.
+
+AC_DEFUN([LIBCURL_CHECK_CONFIG],
+[
+  AH_TEMPLATE([LIBCURL_FEATURE_SSL],[Defined if libcurl supports SSL])
+  AH_TEMPLATE([LIBCURL_FEATURE_KRB4],[Defined if libcurl supports KRB4])
+  AH_TEMPLATE([LIBCURL_FEATURE_IPV6],[Defined if libcurl supports IPv6])
+  AH_TEMPLATE([LIBCURL_FEATURE_LIBZ],[Defined if libcurl supports libz])
+  AH_TEMPLATE([LIBCURL_FEATURE_ASYNCHDNS],[Defined if libcurl supports AsynchDNS])
+
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTP],[Defined if libcurl supports HTTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTPS],[Defined if libcurl supports HTTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTP],[Defined if libcurl supports FTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTPS],[Defined if libcurl supports FTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_GOPHER],[Defined if libcurl supports GOPHER])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FILE],[Defined if libcurl supports FILE])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_TELNET],[Defined if libcurl supports TELNET])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT])
+
+  AC_ARG_WITH(libcurl,
+     AC_HELP_STRING([--with-libcurl=DIR],[look for the curl library in DIR]),
+     [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])])
+
+  if test "$_libcurl_with" != "no" ; then
+
+     AC_PROG_AWK
+
+     _libcurl_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'"
+
+     _libcurl_try_link=yes
+
+     if test -d "$_libcurl_with" ; then
+        CPPFLAGS="${CPPFLAGS} -I$withval/include"
+        LDFLAGS="${LDFLAGS} -L$withval/lib"
+     fi
+
+     AC_PATH_PROG([_libcurl_config],[curl-config])
+
+     if test x$_libcurl_config != "x" ; then
+        AC_CACHE_CHECK([for the version of libcurl],
+	   [libcurl_cv_lib_curl_version],
+           [libcurl_cv_lib_curl_version=`$_libcurl_config --version | $AWK '{print $[]2}'`])
+
+	_libcurl_version=`echo $libcurl_cv_lib_curl_version | $_libcurl_version_parse`
+	_libcurl_wanted=`echo ifelse([$2],,[0],[$2]) | $_libcurl_version_parse`
+
+        if test $_libcurl_wanted -gt 0 ; then
+	   AC_CACHE_CHECK([for libcurl >= version $2],
+	      [libcurl_cv_lib_version_ok],
+              [
+   	      if test $_libcurl_version -ge $_libcurl_wanted ; then
+	         libcurl_cv_lib_version_ok=yes
+      	      else
+	         libcurl_cv_lib_version_ok=no
+  	      fi
+              ])
+        fi
+
+	if test $_libcurl_wanted -eq 0 || test x$libcurl_cv_lib_version_ok = xyes ; then
+           if test x"$LIBCURL_CPPFLAGS" = "x" ; then
+              LIBCURL_CPPFLAGS=`$_libcurl_config --cflags`
+           fi
+           if test x"$LIBCURL" = "x" ; then
+              LIBCURL=`$_libcurl_config --libs`
+           fi
+
+	   # All curl-config scripts support --feature
+	   _libcurl_features=`$_libcurl_config --feature`
+
+           # Is it modern enough to have --protocols? (7.12.4)
+	   if test $_libcurl_version -ge 461828 ; then
+              _libcurl_protocols=`$_libcurl_config --protocols`
+           fi
+	else
+           _libcurl_try_link=no
+	fi
+
+	unset _libcurl_wanted
+     fi
+
+     if test $_libcurl_try_link = yes ; then
+
+        # we didn't find curl-config, so let's see if the user-supplied
+        # link line (or failing that, "-lcurl") is enough.
+        LIBCURL=${LIBCURL-"-lcurl"}
+
+        AC_CACHE_CHECK([whether libcurl is usable],
+           [libcurl_cv_lib_curl_usable],
+           [
+           _libcurl_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS"
+           _libcurl_save_ldflags=$LDFLAGS
+           LDFLAGS="$LDFLAGS $LIBCURL"
+
+           AC_LINK_IFELSE(AC_LANG_PROGRAM([#include <curl/curl.h>],[
+/* Try and use a few common options to force a failure if we are
+   missing symbols or can't link. */
+int x;
+curl_easy_setopt(NULL,CURLOPT_URL,NULL);
+x=CURL_ERROR_SIZE;
+x=CURLOPT_WRITEFUNCTION;
+x=CURLOPT_FILE;
+x=CURLOPT_ERRORBUFFER;
+x=CURLOPT_STDERR;
+x=CURLOPT_VERBOSE;
+]),libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no)
+
+           CPPFLAGS=$_libcurl_save_cppflags
+           LDFLAGS=$_libcurl_save_ldflags
+           unset _libcurl_save_cppflags
+           unset _libcurl_save_ldflags
+           ])
+
+        if test $libcurl_cv_lib_curl_usable = yes ; then
+           AC_DEFINE(HAVE_LIBCURL,1,
+             [Define to 1 if you have a functional curl library.])
+           AC_SUBST(LIBCURL_CPPFLAGS)
+           AC_SUBST(LIBCURL)
+
+           for _libcurl_feature in $_libcurl_features ; do
+	      AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_feature_$_libcurl_feature),[1])
+	      eval AS_TR_SH(libcurl_feature_$_libcurl_feature)=yes
+           done
+
+	   if test "x$_libcurl_protocols" = "x" ; then
+
+	      # We don't have --protocols, so just assume that all
+	      # protocols are available
+	      _libcurl_protocols="HTTP FTP GOPHER FILE TELNET LDAP DICT"
+
+	      if test x$libcurl_feature_SSL = xyes ; then
+	         _libcurl_protocols="$_libcurl_protocols HTTPS"
+
+		 # FTPS wasn't standards-compliant until version
+		 # 7.11.0
+		 if test $_libcurl_version -ge 461568; then
+		    _libcurl_protocols="$_libcurl_protocols FTPS"
+		 fi
+	      fi
+	   fi
+
+	   for _libcurl_protocol in $_libcurl_protocols ; do
+	      AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_protocol_$_libcurl_protocol),[1])
+	      eval AS_TR_SH(libcurl_protocol_$_libcurl_protocol)=yes
+           done
+        fi
+     fi
+
+     unset _libcurl_try_link
+     unset _libcurl_version_parse
+     unset _libcurl_config
+     unset _libcurl_feature
+     unset _libcurl_features
+     unset _libcurl_protocol
+     unset _libcurl_protocols
+     unset _libcurl_version
+  fi
+
+  if test x$_libcurl_with = xno || test x$libcurl_cv_lib_curl_usable != xyes ; then
+     # This is the IF-NO path
+     ifelse([$4],,:,[$4])
+  else
+     # This is the IF-YES path
+     ifelse([$3],,:,[$3])
+  fi
+
+  unset _libcurl_with
+])dnl

include/curl/curl.h

@@ -712,7 +712,7 @@ typedef enum {
   CINIT(SSLENGINE_DEFAULT, LONG, 90),
 
   /* Non-zero value means to use the global dns cache */
-  CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To become OBSOLETE soon */
+  CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* To becomeO BSOLETE soon */
 
   /* DNS cache timeout */
   CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
@@ -842,25 +842,15 @@ typedef enum {
   /* Enable/disable the TCP Nagle algorithm */
   CINIT(TCP_NODELAY, LONG, 121),
 
-  /* When doing 3rd party transfer, set the source host name with this */
+  /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
-  CINIT(SOURCE_HOST, OBJECTPOINT, 122),
 
   /* When doing 3rd party transfer, set the source user and password with
      this */
   CINIT(SOURCE_USERPWD, OBJECTPOINT, 123),
 
-  /* When doing 3rd party transfer, set the source file path with this */
+  /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
-  CINIT(SOURCE_PATH, OBJECTPOINT, 124),
+  /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
-
+  /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
-  /* When doing 3rd party transfer, set the source server's port number
-     with this */
-  CINIT(SOURCE_PORT, LONG, 125),
-
-  /* When doing 3rd party transfer, decide which server that should get the
-     PASV command (and the other gets the PORT).
-     0 (default) - The target host issues PASV.
-     1           - The source host issues PASV */
-  CINIT(PASV_HOST, LONG, 126),
 
   /* When doing 3rd party transfer, set the source pre-quote linked list
      of commands with this */
@@ -885,6 +875,17 @@ typedef enum {
   CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130),
   CINIT(IOCTLDATA, OBJECTPOINT, 131),
 
+  /* To make a 3rd party transfer, set the source URL with this */
+  CINIT(SOURCE_URL, OBJECTPOINT, 132),
+
+  /* When doing 3rd party transfer, set the source quote linked list of
+     commands with this */
+  CINIT(SOURCE_QUOTE, OBJECTPOINT, 133),
+
+  /* zero terminated string for pass on to the FTP server when asked for
+     "account" info */
+  CINIT(FTP_ACCOUNT, OBJECTPOINT, 134),
+
   CURLOPT_LASTENTRY /* the last unused */
 } CURLoption;
 
@@ -910,6 +911,11 @@ typedef enum {
 #define CURLOPT_PASSWDDATA     -4
 #define CURLOPT_CLOSEFUNCTION  -5
 
+#define CURLOPT_SOURCE_HOST    -6
+#define CURLOPT_SOURCE_PATH    -7
+#define CURLOPT_SOURCE_PORT    -8
+#define CURLOPT_PASV_HOST      -9
+
 #else
 /* This is set if CURL_NO_OLDIES is defined at compile-time */
 #undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */
@@ -1337,7 +1343,7 @@ typedef enum {
 /* The 'CURLVERSION_NOW' is the symbolic name meant to be used by
    basicly all programs ever, that want to get version information. It is
    meant to be a built-in version number for what kind of struct the caller
-   expects. If the struct ever changes, we redfine the NOW to another enum
+   expects. If the struct ever changes, we redefine the NOW to another enum
    from above. */
 #define CURLVERSION_NOW CURLVERSION_THIRD
 
@@ -1347,11 +1353,11 @@ typedef struct {
   unsigned int version_num; /* LIBCURL_VERSION_NUM */
   const char *host;         /* OS/host/cpu/machine when configured */
   int features;             /* bitmask, see defines below */
-  char *ssl_version;        /* human readable string */
+  const char *ssl_version;  /* human readable string */
   long ssl_version_num;     /* number */
   const char *libz_version;       /* human readable string */
   /* protocols is terminated by an entry with a NULL protoname */
-  const char **protocols;
+  const char * const *protocols;
 
   /* The fields below this were added in CURLVERSION_SECOND */
   const char *ares;

include/curl/curlver.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -28,7 +28,7 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "7.12.3-CVS"
+#define LIBCURL_VERSION "7.13.1-CVS"
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparions by programs. The LIBCURL_VERSION_NUM define will
@@ -44,12 +44,12 @@
    always a greater number in a more recent release. It makes comparisons with
    greater than and less than work.
 */
-#define LIBCURL_VERSION_NUM 0x070c03
+#define LIBCURL_VERSION_NUM 0x070d01
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 7
-#define LIBCURL_VERSION_MINOR 12
+#define LIBCURL_VERSION_MINOR 13
-#define LIBCURL_VERSION_PATCH 3
+#define LIBCURL_VERSION_PATCH 1
 
 #endif /* __CURL_CURLVER_H */

include/curl/multi.h

@@ -67,7 +67,9 @@
 #include <sys/select.h>
 #endif
 
+#ifndef _WIN32_WCE
 #include <sys/socket.h>
+#endif
 #include <sys/time.h>
 #include <sys/types.h>
 #endif

lib/Makefile.Watcom

@@ -0,0 +1,357 @@
+#
+#  Watcom / OpenWatcom / Win32 makefile for libcurl.
+#  G. Vanem <giva@bgnett.no>
+#
+# $Id$
+
+TARGETS = libcurl_wc.lib libcurl_wc.dll libcurl_wc_imp.lib
+
+CC = wcc386
+
+CFLAGS = -3r -mf -d3 -hc -zff -zgf -zq -zm -s -fr=con -w2 -fpi -oilrtfm -bt=nt -bd &
+         -d+ -dWIN32 -dHAVE_LONGLONG -dCURL_CA_BUNDLE=getenv("CURL_CA_BUNDLE") &
+         -dBUILDING_LIBCURL -dWITHOUT_MM_LIB -dHAVE_SPNEGO=1 -dENABLE_IPV6     &
+         -dDEBUG_THREADING_GETADDRINFO -dDEBUG=1 -dCURLDEBUG -I. -I..\include
+
+OBJ_DIR  = Watcom_obj
+LIB_ARG  = $(OBJ_DIR)\wlib.arg
+LINK_ARG = $(OBJ_DIR)\wlink.arg
+
+OBJS = $(OBJ_DIR)\transfer.obj         $(OBJ_DIR)\file.obj       &
+       $(OBJ_DIR)\strequal.obj         $(OBJ_DIR)\timeval.obj    &
+       $(OBJ_DIR)\easy.obj             $(OBJ_DIR)\base64.obj     &
+       $(OBJ_DIR)\security.obj         $(OBJ_DIR)\hostip.obj     &
+       $(OBJ_DIR)\krb4.obj             $(OBJ_DIR)\progress.obj   &
+       $(OBJ_DIR)\memdebug.obj         $(OBJ_DIR)\formdata.obj   &
+       $(OBJ_DIR)\http_chunks.obj      $(OBJ_DIR)\cookie.obj     &
+       $(OBJ_DIR)\strtok.obj           $(OBJ_DIR)\http.obj       &
+       $(OBJ_DIR)\connect.obj          $(OBJ_DIR)\sendf.obj      &
+       $(OBJ_DIR)\llist.obj            $(OBJ_DIR)\ftp.obj        &
+       $(OBJ_DIR)\hash.obj             $(OBJ_DIR)\url.obj        &
+       $(OBJ_DIR)\multi.obj            $(OBJ_DIR)\dict.obj       &
+       $(OBJ_DIR)\content_encoding.obj $(OBJ_DIR)\if2ip.obj      &
+       $(OBJ_DIR)\share.obj            $(OBJ_DIR)\speedcheck.obj &
+       $(OBJ_DIR)\http_digest.obj      $(OBJ_DIR)\ldap.obj       &
+       $(OBJ_DIR)\md5.obj              $(OBJ_DIR)\ssluse.obj     &
+       $(OBJ_DIR)\http_negotiate.obj   $(OBJ_DIR)\version.obj    &
+       $(OBJ_DIR)\http_ntlm.obj        $(OBJ_DIR)\getenv.obj     &
+       $(OBJ_DIR)\inet_pton.obj        $(OBJ_DIR)\escape.obj     &
+       $(OBJ_DIR)\strtoofft.obj        $(OBJ_DIR)\mprintf.obj    &
+       $(OBJ_DIR)\strerror.obj         $(OBJ_DIR)\telnet.obj     &
+       $(OBJ_DIR)\hostares.obj         $(OBJ_DIR)\netrc.obj      &
+       $(OBJ_DIR)\hostasyn.obj         $(OBJ_DIR)\getinfo.obj    &
+       $(OBJ_DIR)\hostip4.obj          $(OBJ_DIR)\hostthre.obj   &
+       $(OBJ_DIR)\hostip6.obj          $(OBJ_DIR)\inet_ntop.obj  &
+       $(OBJ_DIR)\hostsyn.obj          $(OBJ_DIR)\parsedate.obj  &
+       $(OBJ_DIR)\select.obj
+
+RESOURCE = $(OBJ_DIR)\libcurl.res
+
+all: $(OBJ_DIR) $(TARGETS) .SYMBOLIC
+	@echo Welcome to libcurl
+
+$(OBJ_DIR):
+	mkdir $(OBJ_DIR)
+
+libcurl_wc.lib: $(OBJS) $(LIB_ARG)
+	wlib -q -b -c $@ @$(LIB_ARG)
+
+libcurl_wc.dll: $(OBJS) $(RESOURCE) $(LINK_ARG)
+	wlink name libcurl_wc.dll @$(LINK_ARG)
+
+clean: .SYMBOLIC
+	- rm -f $(OBJS) $(RESOURCE)
+
+vclean realclean: clean .SYMBOLIC
+	- rm -f $(TARGETS) $(LIB_ARG) $(LINK_ARG) libcurl_wc.map
+	- rmdir $(OBJ_DIR)
+
+.ERASE
+$(RESOURCE): libcurl.rc
+        wrc -dCURLDEBUG=1 -q -r -zm -I..\include -fo=$@ libcurl.rc
+
+.ERASE
+.c{$(OBJ_DIR)}.obj:
+	$(CC) $[@ $(CFLAGS) -fo=$@
+	@echo .
+
+$(LIB_ARG): $(__MAKEFILES__)
+	%create $^@
+	for %f in ($(OBJS)) do @%append $^@ +- %f
+
+$(LINK_ARG): $(__MAKEFILES__)
+	%create $^@
+	@%append $^@ system nt dll
+	@%append $^@ file { $(OBJS) }
+	@%append $^@ option quiet, map, caseexact, eliminate, implib=libcurl_wc_imp.lib,
+	@%append $^@ res=$(RESOURCE) libpath $(%watcom)\lib386;$(%watcom)\lib386\nt
+	@%append $^@ library clib3r.lib, ws2_32.lib
+
+#
+# Dependencies based on "gcc -MM .."
+#
+$(OBJ_DIR)\file.obj: file.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h progress.h sendf.h escape.h file.h &
+  speedcheck.h getinfo.h transfer.h url.h memory.h ..\include\curl\mprintf.h &
+  memdebug.h
+
+$(OBJ_DIR)\timeval.obj: timeval.c timeval.h setup.h config-win32.h
+
+$(OBJ_DIR)\base64.obj: base64.c setup.h config-win32.h ..\include\curl\mprintf.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h base64.h memory.h ..\include\curl\curl.h &
+  memdebug.h
+
+$(OBJ_DIR)\hostip.obj: hostip.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  inet_ntop.h ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\progress.obj: progress.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h http_chunks.h &
+  hostip.h hash.h llist.h sendf.h progress.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\formdata.obj: formdata.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h strequal.h &
+  memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\cookie.obj: cookie.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h strequal.h strtok.h sendf.h &
+  memory.h memdebug.h
+
+$(OBJ_DIR)\http.obj: http.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h transfer.h sendf.h progress.h &
+  base64.h strequal.h ssluse.h http_digest.h http_ntlm.h http_negotiate.h &
+  url.h share.h http.h memory.h select.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\sendf.obj: sendf.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h connect.h &
+  ..\include\curl\mprintf.h memory.h strerror.h memdebug.h
+
+$(OBJ_DIR)\ftp.obj: ftp.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  if2ip.h progress.h transfer.h escape.h http.h ftp.h strtoofft.h &
+  strequal.h ssluse.h connect.h strerror.h memory.h inet_ntop.h select.h &
+  ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\url.obj: url.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h netrc.h base64.h ssluse.h if2ip.h &
+  transfer.h sendf.h progress.h strequal.h strerror.h escape.h strtok.h &
+  share.h content_encoding.h http_digest.h http_negotiate.h select.h multiif.h &
+  ftp.h dict.h telnet.h http.h file.h ldap.h url.h connect.h inet_ntop.h &
+  ./ca-bundle.h ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\dict.obj: dict.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h transfer.h sendf.h progress.h &
+  strequal.h dict.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\if2ip.obj: if2ip.c setup.h config-win32.h
+
+$(OBJ_DIR)\speedcheck.obj: speedcheck.c setup.h config-win32.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  speedcheck.h
+
+$(OBJ_DIR)\ldap.obj: ldap.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h escape.h transfer.h &
+  strequal.h strtok.h ldap.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\ssluse.obj: ssluse.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h url.h inet_pton.h &
+  ssluse.h connect.h strequal.h select.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\version.obj: version.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\getenv.obj: getenv.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memory.h memdebug.h
+
+$(OBJ_DIR)\escape.obj: escape.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memory.h &
+  ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\mprintf.obj: mprintf.c setup.h config-win32.h ..\include\curl\mprintf.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h memory.h ..\include\curl\curl.h memdebug.h
+
+$(OBJ_DIR)\telnet.obj: telnet.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h transfer.h sendf.h telnet.h &
+  ..\include\curl\mprintf.h arpa_telnet.h memory.h select.h memdebug.h
+
+$(OBJ_DIR)\netrc.obj: netrc.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h netrc.h strequal.h &
+  strtok.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\getinfo.obj: getinfo.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  getinfo.h memory.h ssluse.h memdebug.h
+
+$(OBJ_DIR)\transfer.obj: transfer.c setup.h config-win32.h strtoofft.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h strequal.h urldata.h &
+  cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  netrc.h content_encoding.h transfer.h sendf.h speedcheck.h progress.h &
+  http.h url.h getinfo.h ssluse.h http_digest.h http_ntlm.h &
+  http_negotiate.h share.h memory.h select.h ..\include\curl\mprintf.h &
+  memdebug.h
+
+$(OBJ_DIR)\strequal.obj: strequal.c setup.h config-win32.h strequal.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)\easy.obj: easy.c setup.h config-win32.h strequal.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  transfer.h ssluse.h url.h getinfo.h share.h memory.h progress.h &
+  easyif.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\security.obj: security.c setup.h config-win32.h
+
+$(OBJ_DIR)\krb4.obj: krb4.c setup.h config-win32.h
+
+$(OBJ_DIR)\memdebug.obj: memdebug.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h ..\include\curl\mprintf.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h memory.h memdebug.h
+
+$(OBJ_DIR)\http_chunks.obj: http_chunks.c setup.h config-win32.h urldata.h &
+  cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  content_encoding.h http.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\strtok.obj: strtok.c setup.h config-win32.h strtok.h
+
+$(OBJ_DIR)\connect.obj: connect.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h if2ip.h strerror.h connect.h &
+  memory.h select.h memdebug.h
+
+$(OBJ_DIR)\llist.obj: llist.c setup.h config-win32.h llist.h memory.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memdebug.h
+
+$(OBJ_DIR)\hash.obj: hash.c setup.h config-win32.h hash.h llist.h memory.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h memdebug.h
+
+$(OBJ_DIR)\multi.obj: multi.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h urldata.h cookie.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  transfer.h url.h connect.h progress.h memory.h easyif.h multiif.h &
+  memdebug.h
+
+$(OBJ_DIR)\content_encoding.obj: content_encoding.c setup.h config-win32.h urldata.h &
+  cookie.h ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h sendf.h &
+  content_encoding.h memory.h memdebug.h
+
+$(OBJ_DIR)\share.obj: share.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h ..\include\curl\multi.h &
+  ..\include\curl\curl.h urldata.h cookie.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h share.h memory.h memdebug.h
+
+$(OBJ_DIR)\http_digest.obj: http_digest.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h strequal.h base64.h md5.h &
+  http_digest.h strtok.h url.h memory.h ..\include\curl\mprintf.h memdebug.h
+
+$(OBJ_DIR)\md5.obj: md5.c setup.h config-win32.h md5.h
+
+$(OBJ_DIR)\http_negotiate.obj: http_negotiate.c setup.h config-win32.h
+
+$(OBJ_DIR)\http_ntlm.obj: http_ntlm.c setup.h config-win32.h
+
+$(OBJ_DIR)\inet_pton.obj: inet_pton.c setup.h config-win32.h inet_pton.h
+
+$(OBJ_DIR)\strtoofft.obj: strtoofft.c setup.h config-win32.h strtoofft.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)\strerror.obj: strerror.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h strerror.h urldata.h &
+  cookie.h formdata.h timeval.h http_chunks.h hostip.h hash.h llist.h &
+  ..\include\curl\mprintf.h
+
+$(OBJ_DIR)\hostares.obj: hostares.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostasyn.obj: hostasyn.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostip4.obj: hostip4.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostip6.obj: hostip6.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostsyn.obj: hostsyn.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h memory.h memdebug.h
+
+$(OBJ_DIR)\hostthre.obj: hostthre.c setup.h config-win32.h urldata.h cookie.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h formdata.h timeval.h &
+  http_chunks.h hostip.h hash.h llist.h sendf.h share.h strerror.h url.h &
+  ..\include\curl\mprintf.h inet_ntop.h memory.h memdebug.h
+
+$(OBJ_DIR)\inet_ntop.obj: inet_ntop.c setup.h config-win32.h ..\include\curl\mprintf.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h inet_ntop.h
+
+$(OBJ_DIR)\parsedate.obj: parsedate.c setup.h config-win32.h ..\include\curl\curl.h &
+  ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)\select.obj: select.c setup.h config-win32.h select.h

lib/Makefile.am

@@ -30,7 +30,7 @@ EXTRA_DIST = Makefile.b32 Makefile.m32 Makefile.vc6 Makefile.riscos $(DSP)    \
  README.ares README.curlx makefile.dj config.dj libcurl.framework.make	      \
  libcurl.plist libcurl.rc config-amigaos.h amigaos.c amigaos.h makefile.amiga \
  Makefile.netware nwlib.c libcurl.imp msvcproj.head msvcproj.foot	      \
- config-win32ce.h README.httpauth
+ config-win32ce.h README.httpauth Makefile.Watcom README.hostip
 
 CLEANFILES = $(DSP)
 

lib/Makefile.inc

@@ -17,4 +17,4 @@ HHEADERS = arpa_telnet.h netrc.h file.h timeval.h base64.h hostip.h	\
   http_chunks.h strtok.h connect.h llist.h hash.h content_encoding.h	\
   share.h md5.h http_digest.h http_negotiate.h http_ntlm.h ca-bundle.h	\
   inet_pton.h strtoofft.h strerror.h inet_ntop.h curlx.h memory.h	\
-  setup.h transfer.h select.h
+  setup.h transfer.h select.h easyif.h multiif.h

lib/Makefile.vc6

@@ -35,7 +35,7 @@ IMPLIB_NAME       = libcurl_imp
 IMPLIB_NAME_DEBUG = libcurld_imp
 
 !IFNDEF OPENSSL_PATH
-OPENSSL_PATH   = ../../openssl-0.9.7d
+OPENSSL_PATH   = ../../openssl-0.9.7e
 !ENDIF
 
 !IFNDEF ZLIB_PATH
@@ -58,6 +58,8 @@ LNKDLL     = link.exe /DLL
 LNKLIB     = link.exe /lib
 LFLAGS     = /nologo
 SSLLIBS    = libeay32.lib ssleay32.lib
+ZLIBLIBSDLL= zdll.lib
+ZLIBLIBS   = zlib.lib
 !IFDEF USEMM_LIBS
 WINLIBS    = wsock32.lib winmm.lib
 !ELSE
@@ -72,8 +74,8 @@ CFGSET     = FALSE
 
 !IF "$(CFG)" == "release"
 TARGET = $(LIB_NAME).lib
-DIROBJ = .\$(CFG)
+DIROBJ = $(CFG)
-LNK    = $(LNKLIB) /out:$(TARGET)
+LNK    = $(LNKLIB) /out:$(DIROBJ)\$(TARGET)
 CC     = $(CCNODBG)
 CFGSET = TRUE
 !ENDIF
@@ -83,9 +85,9 @@ CFGSET = TRUE
 
 !IF "$(CFG)" == "release-zlib"
 TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
-LNK      = $(LNKLIB) $(LFLAGSZLIB) /out:$(TARGET)
+LNK      = $(LNKLIB) $(ZLIBLIBS) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCNODBG) $(CFLAGSZLIB)
 CFGSET   = TRUE
 !ENDIF
@@ -95,8 +97,8 @@ CFGSET   = TRUE
 
 !IF "$(CFG)" == "release-dll"
 TARGET = $(LIB_NAME).dll
-DIROBJ = .\$(CFG)
+DIROBJ = $(CFG)
-LNK    = $(LNKDLL) $(WINLIBS) /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME).lib
+LNK    = $(LNKDLL) $(WINLIBS) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
 CC     = $(CCNODBG)
 CFGSET = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
@@ -107,9 +109,9 @@ RESOURCE = $(DIROBJ)\libcurl.res
 
 !IF "$(CFG)" == "release-ssl"
 TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
-LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(TARGET)
+LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCNODBG) $(CFLAGSSSL)
 CFGSET   = TRUE
 !ENDIF
@@ -118,81 +120,123 @@ CFGSET   = TRUE
 # release-ssl-dll
 
 !IF "$(CFG)" == "release-ssl-dll"
-TARGET   = $(LIB_NAME).dll
+TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32dll"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
-LNK      = $(LNKDLL) $(SSLLIBS) $(WINLIBS) $(LFLAGSSSL) /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME).lib
+LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCNODBG) $(CFLAGSSSL)
 CFGSET   = TRUE
-RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
 
 ######################
 # release-ssl-zlib
+
 !IF "$(CFG)" == "release-ssl-zlib"
 TARGET   = $(LIB_NAME).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
-LNK      = $(LNKLIB) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(TARGET)
+LNK      = $(LNKLIB) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB)
 CFGSET   = TRUE
 !ENDIF
 
 ######################
-# release-libcurl-ssl-dll
+# release-dll-ssl-dll
-!IF "$(CFG)" == "release-libcurl-ssl-dll"
+
-TARGET   = $(LIB_NAME).lib
+!IF "$(CFG)" == "release-dll-ssl-dll"
-DIROBJ   = .\$(CFG)
+TARGET   = $(LIB_NAME).dll
-LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)/out32dll"
+DIROBJ   = $(CFG)
-LNK      = $(LNKLIB) $(SSLLIBS) $(LFLAGSSSL) /out:$(TARGET)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
 CC       = $(CCNODBG) $(CFLAGSSSL)
 CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
 
+######################
+# release-zlib-dll
+
+!IF "$(CFG)" == "release-zlib-dll"
+TARGET   = $(LIB_NAME).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKLIB) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCNODBG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# release-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "release-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# release-dll-zlib-dll
+
+!IF "$(CFG)" == "release-dll-zlib-dll"
+TARGET   = $(LIB_NAME).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKDLL) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
+CC       = $(CCNODBG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# release-dll-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "release-dll-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(IMPLIB_NAME).lib
+CC       = $(CCNODBG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
 
 ######################
 # debug
 
 !IF "$(CFG)" == "debug"
 TARGET = $(LIB_NAME_DEBUG).lib
-DIROBJ = .\$(CFG)
+DIROBJ = $(CFG)
-LNK    = $(LNKLIB) /out:$(TARGET)
+LNK    = $(LNKLIB) /out:$(DIROBJ)\$(TARGET)
 CC     = $(CCDEBUG)
 CFGSET = TRUE
 !ENDIF
 
-######################
-# debug-dll
-
-!IF "$(CFG)" == "debug-dll"
-TARGET = $(LIB_NAME_DEBUG).dll
-DIROBJ = .\$(CFG)
-LNK    = $(LNKDLL) $(WINLIBS) /DEBUG /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME_DEBUG).lib /PDB:$(IMPLIB_NAME_DEBUG).pdb
-CC     = $(CCDEBUG)
-CFGSET = TRUE
-RESOURCE = $(DIROBJ)\libcurl.res
-!ENDIF
-
 ######################
 # debug-ssl
-#todo
+
 !IF "$(CFG)" == "debug-ssl"
 TARGET   = $(LIB_NAME_DEBUG).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
-LNK      = $(LNKLIB) $(LFLAGSSSL) /out:$(TARGET)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
+LNK      = $(LNKLIB) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCDEBUG) $(CFLAGSSSL)
 CFGSET   = TRUE
 !ENDIF
 
 ######################
 # debug-zlib
+
 !IF "$(CFG)" == "debug-zlib"
 TARGET   = $(LIB_NAME_DEBUG).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
 LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
-LNK      = $(LNKLIB) $(LFLAGSZLIB) /out:$(TARGET)
+LNK      = $(LNKLIB) $(ZLIBLIBS) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCDEBUG) $(CFLAGSZLIB)
 CFGSET   = TRUE
 !ENDIF
@@ -201,38 +245,151 @@ CFGSET   = TRUE
 # debug-ssl-dll
 
 !IF "$(CFG)" == "debug-ssl-dll"
-TARGET   = $(LIB_NAME_DEBUG).dll
+TARGET   = $(LIB_NAME_DEBUG).lib
-DIROBJ   = .\$(CFG)
+DIROBJ   = $(CFG)
-LFLAGSSSL = /LIBPATH:$(OPENSSL_PATH)/out32dll
+LFLAGSSSL = /LIBPATH:$(OPENSSL_PATH)\out32dll
-LNK      = $(LNKDLL) $(WINLIBS) $(LFLAGSSSL) /DEBUG /out:$(TARGET) /IMPLIB:$(IMPLIB_NAME_DEBUG).lib /PDB:$(IMPLIB_NAME_DEBUG).pdb
+LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /out:$(DIROBJ)\$(TARGET)
 CC       = $(CCDEBUG) $(CFLAGSSSL)
 CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-ssl-zlib
+
+!IF "$(CFG)" == "debug-ssl-zlib"
+TARGET   = $(LIB_NAME_DEBUG).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32"
+LNK      = $(LNKLIB) $(SSLLIBS) $(ZLIBLIBS) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-zlib-dll
+
+!IF "$(CFG)" == "debug-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKLIB) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "debug-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).lib
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKLIB) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /out:$(DIROBJ)\$(TARGET)
+CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
+!ENDIF
+
+######################
+# debug-dll
+
+!IF "$(CFG)" == "debug-dll"
+TARGET = $(LIB_NAME_DEBUG).dll
+DIROBJ = $(CFG)
+LNK    = $(LNKDLL) $(WINLIBS) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(LIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC     = $(CCDEBUG)
+CFGSET = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# debug-dll-ssl-dll
+
+!IF "$(CFG)" == "debug-dll-ssl-dll"
+TARGET   = $(LIB_NAME_DEBUG).dll
+DIROBJ   = $(CFG)
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(LFLAGSSSL) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(LIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC       = $(CCDEBUG) $(CFLAGSSSL)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# debug-dll-zlib-dll
+
+!IF "$(CFG)" == "debug-dll-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LNK      = $(LNKDLL) $(WINLIBS) $(ZLIBLIBSDLL) $(LFLAGSZLIB) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(LIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC       = $(CCDEBUG) $(CFLAGSZLIB)
+CFGSET   = TRUE
+RESOURCE = $(DIROBJ)\libcurl.res
+!ENDIF
+
+######################
+# debug-dll-ssl-dll-zlib-dll
+
+!IF "$(CFG)" == "debug-dll-ssl-dll-zlib-dll"
+TARGET   = $(LIB_NAME_DEBUG).dll
+DIROBJ   = $(CFG)
+LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+LFLAGSSSL = "/LIBPATH:$(OPENSSL_PATH)\out32dll"
+LNK      = $(LNKDLL) $(WINLIBS) $(SSLLIBS) $(ZLIBLIBSDLL) $(LFLAGSSSL) $(LFLAGSZLIB) /DEBUG /out:$(DIROBJ)\$(TARGET) /IMPLIB:$(DIROBJ)\$(LIB_NAME_DEBUG).lib /PDB:$(DIROBJ)\$(IMPLIB_NAME_DEBUG).pdb
+CC       = $(CCDEBUG) $(CFLAGSSSL) $(CFLAGSZLIB)
+CFGSET   = TRUE
 RESOURCE = $(DIROBJ)\libcurl.res
 !ENDIF
 
 #######################
 # Usage
 #
-!IF "$(CFGSET)" == "FALSE"
+!IF "$(CFGSET)" == "FALSE" && "$(CFG)" != ""
 !MESSAGE Usage: nmake /f makefile.vc6 CFG=<config> <target>
 !MESSAGE where <config> is one of:
-!MESSAGE   release          - release static library
+!MESSAGE   release                      - release static library
-!MESSAGE   release-dll      - release dll
+!MESSAGE   release-ssl                  - release static library with ssl
-!MESSAGE   release-zlib     - release static library with zlib
+!MESSAGE   release-zlib                 - release static library with zlib
-!MESSAGE   release-ssl      - release static library with ssl
+!MESSAGE   release-ssl-zlib             - release static library with ssl and zlib
-!MESSAGE   release-ssl-zlib - release static library with ssl and zlib
+!MESSAGE   release-ssl-dll              - release static library with dynamic ssl
-!MESSAGE   release-ssl-dll  - release dll library with ssl
+!MESSAGE   release-zlib-dll             - release static library with dynamic zlib
-!MESSAGE   release-libcurl-ssl-dll - static libcurl with shared ssl
+!MESSAGE   release-ssl-dll-zlib-dll     - release static library with dynamic ssl and dynamic zlib
-!MESSAGE   debug            - debug static library
+!MESSAGE   release-dll                  - release dynamic library
-!MESSAGE   debug-dll        - debug dll
+!MESSAGE   release-dll-ssl-dll          - release dynamic library with dynamic ssl
-!MESSAGE   debug-zlib       - debug static library with zlib
+!MESSAGE   release-dll-zlib-dll         - release dynamic library with dynamic zlib
-!MESSAGE   debug-ssl        - debug static library with ssl
+!MESSAGE   release-dll-ssl-dll-zlib-dll - release dynamic library with dynamic ssl and dynamic zlib
-!MESSAGE   debug-ssl-dll    - debug dll library with ssl
+!MESSAGE   debug                        - debug static library
+!MESSAGE   debug-ssl                    - debug static library with ssl
+!MESSAGE   debug-zlib                   - debug static library with zlib
+!MESSAGE   debug-ssl-zlib               - debug static library with ssl and zlib
+!MESSAGE   debug-ssl-dll                - debug static library with dynamic ssl
+!MESSAGE   debug-zlib-dll               - debug static library with dynamic zlib
+!MESSAGE   debug-ssl-dll-zlib-dll       - debug static library with dynamic ssl and dynamic zlib
+!MESSAGE   debug-dll                    - debug dynamic library
+!MESSAGE   debug-dll-ssl-dll            - debug dynamic library with dynamic ssl
+!MESSAGE   debug-dll-zlib-dll           - debug dynamic library with dynamic zlib1
+!MESSAGE   debug-dll-ssl-dll-zlib-dll   - debug dynamic library with dynamic ssl and dynamic zlib
 !MESSAGE <target> can be left blank in which case all is assumed
 !ERROR please choose a valid configuration "$(CFG)"
 !ENDIF
 
 #######################
+# Only the clean target can be used if a config was not provided.
+#
+!IF "$(CFGSET)" == "FALSE"
+clean:
+	@-erase /s *.dll 2> NUL
+	@-erase /s *.exp 2> NUL
+	@-erase /s *.idb 2> NUL
+	@-erase /s *.lib 2> NUL
+	@-erase /s *.obj 2> NUL
+	@-erase /s *.pch 2> NUL
+	@-erase /s *.pdb 2> NUL
+	@-erase /s *.res 2> NUL
+!ELSE
+# A config was provided, so the library can be built.
 #
 X_OBJS= \
 	$(DIROBJ)\base64.obj \
@@ -290,9 +447,16 @@ X_OBJS= \
 
 all : $(TARGET)
 
-
 $(TARGET): $(X_OBJS)
 	$(LNK) $(LFLAGS) $(X_OBJS)
+	-xcopy $(DIROBJ)\$(LIB_NAME).dll       . /y
+	-xcopy $(DIROBJ)\$(LIB_NAME).lib       . /y
+	-xcopy $(DIROBJ)\$(LIB_NAME_DEBUG).dll . /y
+	-xcopy $(DIROBJ)\$(LIB_NAME_DEBUG).lib . /y
+	-xcopy $(DIROBJ)\$(IMPLIB_NAME).lib    . /y
+	-xcopy $(DIROBJ)\$(IMPLIB_NAME).lib    . /y
+	-xcopy $(DIROBJ)\*.exp                 . /y
+	-xcopy $(DIROBJ)\*.pdb                 . /y
 
 $(X_OBJS): $(DIROBJ)
 
@@ -305,18 +469,14 @@ $(DIROBJ):
 	$(CC) $(CFLAGS) /Fo"$@"  $<
 
 debug-dll\libcurl.res \
-debug-ssl-dll\libcurl.res \
+debug-dll-ssl-dll\libcurl.res \
-release-libcurl-ssl-dll\libcurl.res: libcurl.rc
+debug-dll-zlib-dll\libcurl.res \
+debug-dll-ssl-dll-zlib-dll\libcurl.res: libcurl.rc
 	rc /dCURLDEBUG=1 /Fo $@ libcurl.rc
 
 release-dll\libcurl.res \
-release-ssl-dll\libcurl.res \
+release-dll-ssl-dll\libcurl.res \
-release-libcurl-ssl-dll\libcurl.res: libcurl.rc
+release-dll-zlib-dll\libcurl.res \
+release-dll-ssl-dll-zlib-dll\libcurl.res: libcurl.rc
 	rc /dCURLDEBUG=0 /Fo $@ libcurl.rc
-
+!ENDIF  # End of case where a config was provided.
-clean:
-	-@erase $(DIROBJ)\*.obj
-	-@erase $(DIROBJ)\*.res
-	-@erase vc60.idb
-	-@erase vc60.pch
-

lib/README.hostip

@@ -0,0 +1,35 @@
+ hostip.c explained
+ ==================
+
+ The main COMPILE-TIME DEFINES to keep in mind when reading the host*.c
+ source file are these:
+
+ CURLRES_IPV6 - this host has getaddrinfo() and family, and thus we use
+ that. The host may not be able to resolve IPv6, but we don't really have to
+ take that into account. Hosts that aren't IPv6-enabled have CURLRES_IPV4
+ defined.
+
+ CURLRES_ARES - is defined if libcurl is built to use c-ares for asynchronous
+ name resolves. It cannot have ENABLE_IPV6 defined at the same time, as c-ares
+ has no ipv6 support. This can be Windows or *nix.
+
+ CURLRES_THREADED - is defined if libcurl is built to run under (native)
+ Windows, and then the name resolve will be done in a new thread, and the
+ supported asynch API will be the same as for ares-builds.
+
+ If any of the two previous are defined, CURLRES_ASYNCH is defined too. If
+ libcurl is not built to use an asynchronous resolver, CURLRES_SYNCH is
+ defined.
+
+ The host*.c sources files are split up like this:
+
+ hostip.c   - method-independent resolver functions and utility functions
+ hostasyn.c - functions for asynchronous name resolves
+ hostsyn.c  - functions for synchronous name resolves
+ hostares.c - functions for ares-using name resolves
+ hostthre.c - functions for threaded name resolves
+ hostip4.c  - ipv4-specific functions
+ hostip6.c  - ipv6-specific functions
+
+ The hostip.h is the single united header file for all this. It defines the
+ CURLRES_* defines based on the config*.h and setup.h defines.

lib/arpa_telnet.h

@@ -39,7 +39,7 @@
 /*
  * The telnet options represented as strings
  */
-static const char *telnetoptions[]=
+static const char * const telnetoptions[]=
 {
   "BINARY",      "ECHO",           "RCP",           "SUPPRESS GO AHEAD",
   "NAME",        "STATUS",         "TIMING MARK",   "RCTE",
@@ -78,7 +78,7 @@ static const char *telnetoptions[]=
 /*
  * Then those numbers represented as strings:
  */
-static const char *telnetcmds[]=
+static const char * const telnetcmds[]=
 {
   "EOF",  "SUSP",  "ABORT", "EOR",  "SE",
   "NOP",  "DMARK", "BRK",   "IP",   "AO",

lib/connect.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -98,6 +98,7 @@
 #include "connect.h"
 #include "memory.h"
 #include "select.h"
+#include "url.h" /* for Curl_safefree() */
 
 /* The last #include file should be: */
 #include "memdebug.h"
@@ -429,6 +430,25 @@ static bool verifyconnect(curl_socket_t sockfd, int *error)
   return rc;
 }
 
+CURLcode Curl_store_ip_addr(struct connectdata *conn)
+{
+  char addrbuf[256];
+  Curl_printable_address(conn->ip_addr, addrbuf, sizeof(addrbuf));
+
+  /* save the string */
+  Curl_safefree(conn->ip_addr_str);
+  conn->ip_addr_str = strdup(addrbuf);
+  if(!conn->ip_addr_str)
+    return CURLE_OUT_OF_MEMORY; /* FAIL */
+
+#ifdef PF_INET6
+  if(conn->ip_addr->ai_family == PF_INET6)
+    conn->bits.ipv6 = TRUE;
+#endif
+
+  return CURLE_OK;
+}
+
 /* Used within the multi interface. Try next IP address, return TRUE if no
    more address exists */
 static bool trynextip(struct connectdata *conn,
@@ -450,6 +470,8 @@ static bool trynextip(struct connectdata *conn,
       /* store the new socket descriptor */
       conn->sock[sockindex] = sockfd;
       conn->ip_addr = ai;
+
+      Curl_store_ip_addr(conn);
       return FALSE;
     }
     ai = ai->ai_next;
@@ -754,7 +776,7 @@ CURLcode Curl_connecthost(struct connectdata *conn,  /* context */
 
   if(data->state.used_interface == Curl_if_multi)
     /* don't hang when doing multi */
-    timeout_per_addr = timeout_ms = 0;
+    timeout_per_addr = 0;
 
   /*
    * Connecting with a Curl_addrinfo chain

lib/connect.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -39,6 +39,8 @@ CURLcode Curl_connecthost(struct connectdata *conn,
 
 int Curl_ourerrno(void);
 
+CURLcode Curl_store_ip_addr(struct connectdata *conn);
+
 #define DEFAULT_CONNECT_TIMEOUT 300000 /* milliseconds == five minutes */
 
 #endif

lib/content_encoding.c

@@ -128,7 +128,7 @@ inflate_stream(struct SessionHandle *data,
       }
 
       /* Done with these bytes, exit */
-      if (status == Z_OK && z->avail_in == 0 && z->avail_out > 0) {
+      if (status == Z_OK && z->avail_in == 0) {
         free(decomp);
         return result;
       }

lib/cookie.c

@@ -113,6 +113,8 @@ static void freecookie(struct Cookie *co)
     free(co->value);
   if(co->maxage)
     free(co->maxage);
+  if(co->version)
+    free(co->version);
 
   free(co);
 }

lib/dict.c

@@ -136,12 +136,12 @@ CURLcode Curl_dict(struct connectdata *conn)
     }
 
     result = Curl_sendf(sockfd, conn,
-                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
+                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\r\n"
                         "MATCH "
                         "%s "    /* database */
                         "%s "    /* strategy */
-                        "%s\n"   /* word */
+                        "%s\r\n" /* word */
-                        "QUIT\n",
+                        "QUIT\r\n",
 
                         database,
                         strategy,
@@ -180,11 +180,11 @@ CURLcode Curl_dict(struct connectdata *conn)
     }
 
     result = Curl_sendf(sockfd, conn,
-                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
+                        "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\r\n"
                         "DEFINE "
                         "%s "     /* database */
-                        "%s\n"    /* word */
+                        "%s\r\n"  /* word */
-                        "QUIT\n",
+                        "QUIT\r\n",
                         database,
                         word);
     if(result)
@@ -209,9 +209,9 @@ CURLcode Curl_dict(struct connectdata *conn)
           ppath[i] = ' ';
       }
       result = Curl_sendf(sockfd, conn,
-                          "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\n"
+                          "CLIENT " LIBCURL_NAME " " LIBCURL_VERSION "\r\n"
-                          "%s\n"
+                          "%s\r\n"
-                          "QUIT\n", ppath);
+                          "QUIT\r\n", ppath);
       if(result)
         failf(data, "Failed sending DICT request");
       else

lib/easy.c

@@ -82,6 +82,7 @@
 #include "share.h"
 #include "memory.h"
 #include "progress.h"
+#include "easyif.h"
 
 #define _MPRINTF_REPLACE /* use our functions only */
 #include <curl/mprintf.h>
@@ -165,8 +166,8 @@ static void idna_init (void)
 #endif  /* USE_LIBIDN */
 
 /* true globals -- for curl_global_init() and curl_global_cleanup() */
-static unsigned int  initialized = 0;
+static unsigned int  initialized;
-static long          init_flags  = 0;
+static long          init_flags;
 
 /*
  * If a memory-using function (like curl_getenv) is used before
@@ -354,6 +355,89 @@ CURLcode curl_easy_setopt(CURL *curl, CURLoption tag, ...)
   return ret;
 }
 
+#ifdef CURL_MULTIEASY
+/***************************************************************************
+ * This function is still only for testing purposes. It makes a great way
+ * to run the full test suite on the multi interface instead of the easy one.
+ ***************************************************************************
+ *
+ * The *new* curl_easy_perform() is the external interface that performs a
+ * transfer previously setup.
+ *
+ * Wrapper-function that: creates a multi handle, adds the easy handle to it,
+ * runs curl_multi_perform() until the transfer is done, then detaches the
+ * easy handle, destroys the multi handle and returns the easy handle's return
+ * code. This will make everything internally use and assume multi interface.
+ */
+CURLcode curl_easy_perform(CURL *easy)
+{
+  CURLM *multi;
+  CURLMcode mcode;
+  CURLcode code = CURLE_OK;
+  int still_running;
+  struct timeval timeout;
+  int rc;
+  CURLMsg *msg;
+  fd_set fdread;
+  fd_set fdwrite;
+  fd_set fdexcep;
+  int maxfd;
+
+  if(!easy)
+    return CURLE_BAD_FUNCTION_ARGUMENT;
+
+  multi = curl_multi_init();
+  if(!multi)
+    return CURLE_OUT_OF_MEMORY;
+
+  mcode = curl_multi_add_handle(multi, easy);
+  if(mcode) {
+    curl_multi_cleanup(multi);
+    return CURLE_FAILED_INIT;
+  }
+
+  /* we start some action by calling perform right away */
+
+  do {
+    while(CURLM_CALL_MULTI_PERFORM ==
+          curl_multi_perform(multi, &still_running));
+
+    if(!still_running)
+      break;
+
+    FD_ZERO(&fdread);
+    FD_ZERO(&fdwrite);
+    FD_ZERO(&fdexcep);
+
+    /* timeout once per second */
+    timeout.tv_sec = 1;
+    timeout.tv_usec = 0;
+
+    /* get file descriptors from the transfers */
+    curl_multi_fdset(multi, &fdread, &fdwrite, &fdexcep, &maxfd);
+
+    rc = select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
+
+    if(rc == -1)
+      /* select error */
+      break;
+
+    /* timeout or data to send/receive => loop! */
+  } while(still_running);
+
+  msg = curl_multi_info_read(multi, &rc);
+  if(msg)
+    code = msg->data.result;
+
+  mcode = curl_multi_remove_handle(multi, easy);
+  /* what to do if it fails? */
+
+  mcode = curl_multi_cleanup(multi);
+  /* what to do if it fails? */
+
+  return code;
+}
+#else
 /*
  * curl_easy_perform() is the external interface that performs a transfer
  * previously setup.
@@ -388,6 +472,7 @@ CURLcode curl_easy_perform(CURL *curl)
 
   return Curl_perform(data);
 }
+#endif
 
 /*
  * curl_easy_cleanup() is the external interface to cleaning/freeing the given
@@ -403,6 +488,15 @@ void curl_easy_cleanup(CURL *curl)
   Curl_close(data);
 }
 
+/*
+ * Store a pointed to the multi handle within the easy handle's data struct.
+ */
+void Curl_easy_addmulti(struct SessionHandle *data,
+                        void *multi)
+{
+  data->multi = multi;
+}
+
 /*
  * curl_easy_getinfo() is an external interface that allows an app to retrieve
  * information from a performed transfer and similar.

lib/easyif.h

@@ -0,0 +1,31 @@
+#ifndef __EASYIF_H
+#define __EASYIF_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ ***************************************************************************/
+
+/*
+ * Prototypes for library-wide functions provided by easy.c
+ */
+void Curl_easy_addmulti(struct SessionHandle *data, void *multi);
+
+#endif /* __EASYIF_H */

lib/formdata.c

@@ -1539,7 +1539,7 @@ void curl_formfree(struct curl_httppost *form)
 char *Curl_FormBoundary(void)
 {
   char *retstring;
-  static int randomizer=0; /* this is just so that two boundaries within
+  static int randomizer;   /* this is just so that two boundaries within
                               the same form won't be identical */
   size_t i;
 

lib/ftp.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -149,6 +149,14 @@ static void freedirs(struct FTP *ftp)
   }
 }
 
+/* Returns non-zero iff the given string contains CR (0x0D) or LF (0x0A), which
+   are not allowed within RFC 959 <string>.
+ */
+static bool isBadFtpString(const char *string)
+{
+  return strchr(string, 0x0D) != NULL || strchr(string, 0x0A) != NULL;
+}
+
 /***********************************************************************
  *
  * AllowServerConnect()
@@ -360,7 +368,7 @@ CURLcode Curl_GetFTPResponse(ssize_t *nreadp, /* return number of bytes read */
 
             /* output debug output if that is requested */
             if(data->set.verbose)
-              Curl_debug(data, CURLINFO_HEADER_IN, line_start, perline, conn->host.dispname);
+              Curl_debug(data, CURLINFO_HEADER_IN, line_start, perline, conn);
 
             /*
              * We pass all response-lines to the callback function registered
@@ -474,6 +482,9 @@ CURLcode Curl_ftp_connect(struct connectdata *conn)
   /* no need to duplicate them, this connectdata struct won't change */
   ftp->user = conn->user;
   ftp->passwd = conn->passwd;
+  if (isBadFtpString(ftp->user) || isBadFtpString(ftp->passwd)) {
+    return CURLE_URL_MALFORMAT;
+  }
   ftp->response_time = 3600; /* set default response time-out */
 
 #ifndef CURL_DISABLE_HTTP
@@ -582,7 +593,7 @@ CURLcode Curl_ftp_connect(struct connectdata *conn)
   if(ftpcode == 530) {
     /* 530 User ... access denied
        (the server denies to log the specified user) */
-    failf(data, "Access denied: %s", &buf[4]);
+    failf(data, "Access denied: %03d", ftpcode);
     return CURLE_FTP_ACCESS_DENIED;
   }
   else if(ftpcode == 331) {
@@ -599,7 +610,7 @@ CURLcode Curl_ftp_connect(struct connectdata *conn)
       or
          530 Sorry, the maximum number of allowed users are already connected
       */
-      failf(data, "not logged in: %s", &buf[4]);
+      failf(data, "not logged in: %03d", ftpcode);
       return CURLE_FTP_USER_PASSWORD_INCORRECT;
     }
     else if(ftpcode/100 == 2) {
@@ -610,6 +621,23 @@ CURLcode Curl_ftp_connect(struct connectdata *conn)
 
       infof(data, "We have successfully logged in\n");
     }
+    else if(ftpcode == 332) {
+      /* 332 Please provide account info */
+      if(data->set.ftp_account) {
+        FTPSENDF(conn, "ACCT %s", data->set.ftp_account);
+        result = Curl_GetFTPResponse(&nread, conn, &ftpcode);
+        if(!result && (ftpcode != 230)) {
+          failf(data, "ACCT rejected by server: %03d", ftpcode);
+          result = CURLE_FTP_WEIRD_PASS_REPLY; /* FIX */
+        }
+      }
+      else {
+        failf(data, "ACCT requested by none available");
+        result = CURLE_FTP_WEIRD_PASS_REPLY;
+      }
+      if(result)
+        return result;
+    }
     else {
       failf(data, "Odd return code after PASS");
       return CURLE_FTP_WEIRD_PASS_REPLY;
@@ -1099,52 +1127,61 @@ CURLcode ftp_use_port(struct connectdata *conn)
    *
    */
 
-  struct addrinfo hints, *res, *ai;
+  struct addrinfo *res, *ai;
   struct sockaddr_storage ss;
   socklen_t sslen;
-  char hbuf[NI_MAXHOST];
+  char hbuf[NI_MAXHOST]="";
-
   struct sockaddr *sa=(struct sockaddr *)&ss;
   unsigned char *ap;
   unsigned char *pp;
   char portmsgbuf[1024], tmp[1024];
-
   enum ftpcommand { EPRT, LPRT, PORT, DONE } fcmd;
   const char *mode[] = { "EPRT", "LPRT", "PORT", NULL };
   int rc;
   int error;
+  char *host=NULL;
+  struct Curl_dns_entry *h=NULL;
 
-  /*
+  if(data->set.ftpport && (strlen(data->set.ftpport) > 1)) {
-   * we should use Curl_if2ip?  given pickiness of recent ftpd,
+    /* attempt to get the address of the given interface name */
-   * I believe we should use the same address as the control connection.
+    if(!Curl_if2ip(data->set.ftpport, hbuf, sizeof(hbuf)))
-   */
+      /* not an interface, use the given string as host name instead */
-  sslen = sizeof(ss);
+      host = data->set.ftpport;
-  rc = getsockname(conn->sock[FIRSTSOCKET], (struct sockaddr *)&ss, &sslen);
+    else
-  if(rc < 0) {
+      host = hbuf; /* use the hbuf for host name */
-    failf(data, "getsockname() returned %d\n", rc);
+  } /* data->set.ftpport */
-    return CURLE_FTP_PORT_FAILED;
+
+  if(!host) {
+    /* not an interface and not a host name, get default by extracting
+       the IP from the control connection */
+
+    sslen = sizeof(ss);
+    rc = getsockname(conn->sock[FIRSTSOCKET], (struct sockaddr *)&ss, &sslen);
+    if(rc < 0) {
+      failf(data, "getsockname() returned %d\n", rc);
+      return CURLE_FTP_PORT_FAILED;
+    }
+
+    rc = getnameinfo((struct sockaddr *)&ss, sslen, hbuf, sizeof(hbuf), NULL,
+                     0, NIFLAGS);
+    if(rc) {
+      failf(data, "getnameinfo() returned %d\n", rc);
+      return CURLE_FTP_PORT_FAILED;
+    }
+    host = hbuf; /* use this host name */
   }
 
-  rc = getnameinfo((struct sockaddr *)&ss, sslen, hbuf, sizeof(hbuf), NULL, 0,
+  rc = Curl_resolv(conn, host, 0, &h);
-                   NIFLAGS);
+  if(rc == CURLRESOLV_PENDING)
-  if(rc) {
+    rc = Curl_wait_for_resolv(conn, &h);
-    failf(data, "getnameinfo() returned %d\n", rc);
+  if(h) {
-    return CURLE_FTP_PORT_FAILED;
+    res = h->addr;
-  }
+    /* when we return from this function, we can forget about this entry
-
+       to we can unlock it now already */
-  memset(&hints, 0, sizeof(hints));
+    Curl_resolv_unlock(data, h);
-  hints.ai_family = sa->sa_family;
+  } /* (h) */
-  /*hints.ai_family = ss.ss_family;
+  else
-    this way can be used if sockaddr_storage is properly defined, as glibc
+    res = NULL; /* failure! */
-    2.1.X doesn't do*/
-  hints.ai_socktype = SOCK_STREAM;
-  hints.ai_flags = AI_PASSIVE;
-
-  rc = getaddrinfo(hbuf, NULL, &hints, &res);
-  if(rc) {
-    failf(data, "getaddrinfo() returned %d\n", rc);
-    return CURLE_FTP_PORT_FAILED;
-  }
 
   portsock = CURL_SOCKET_BAD;
   error = 0;
@@ -1153,14 +1190,13 @@ CURLcode ftp_use_port(struct connectdata *conn)
      * Workaround for AIX5 getaddrinfo() problem (it doesn't set ai_socktype):
      */
     if (ai->ai_socktype == 0)
-      ai->ai_socktype = hints.ai_socktype;
+      ai->ai_socktype = SOCK_STREAM;
 
     portsock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol);
     if (portsock == CURL_SOCKET_BAD) {
       error = Curl_ourerrno();
       continue;
     }
-
     if (bind(portsock, ai->ai_addr, ai->ai_addrlen) < 0) {
       error = Curl_ourerrno();
       sclose(portsock);
@@ -1177,7 +1213,7 @@ CURLcode ftp_use_port(struct connectdata *conn)
 
     break;
   }
-  freeaddrinfo(res);
+
   if (portsock == CURL_SOCKET_BAD) {
     failf(data, "%s", Curl_strerror(conn,error));
     return CURLE_FTP_PORT_FAILED;
@@ -1190,15 +1226,12 @@ CURLcode ftp_use_port(struct connectdata *conn)
   }
 
 #ifdef PF_INET6
-  if(!conn->bits.ftp_use_eprt &&
+  if(!conn->bits.ftp_use_eprt && conn->bits.ipv6)
-     (conn->ip_addr->ai_family == PF_INET6)) {
     /* EPRT is disabled but we are connected to a IPv6 host, so we ignore the
-       request! */
+       request and enable EPRT again! */
     conn->bits.ftp_use_eprt = TRUE;
-  }
 #endif
 
-
   for (fcmd = EPRT; fcmd != DONE; fcmd++) {
     int lprtaf, eprtaf;
     int alen=0, plen=0;
@@ -1528,12 +1561,10 @@ CURLcode ftp_use_pasv(struct connectdata *conn,
   char newhost[NEWHOST_BUFSIZE];
 
 #ifdef PF_INET6
-  if(!conn->bits.ftp_use_epsv &&
+  if(!conn->bits.ftp_use_epsv && conn->bits.ipv6)
-     (conn->ip_addr->ai_family == PF_INET6)) {
     /* EPSV is disabled but we are connected to a IPv6 host, so we ignore the
-       request! */
+       request and enable EPSV again! */
     conn->bits.ftp_use_epsv = TRUE;
-  }
 #endif
 
   for (modeoff = (conn->bits.ftp_use_epsv?0:1);
@@ -1583,7 +1614,7 @@ CURLcode ftp_use_pasv(struct connectdata *conn,
     }
 
     if(!*str) {
-      failf(data, "Couldn't interpret this 227-reply: %s", buf);
+      failf(data, "Couldn't interpret the 227-reply");
       return CURLE_FTP_WEIRD_227_FORMAT;
     }
 
@@ -1618,7 +1649,7 @@ CURLcode ftp_use_pasv(struct connectdata *conn,
           newport = num;
 
           /* We must use the same IP we are already connected to */
-          Curl_printable_address(conn->ip_addr, newhost, NEWHOST_BUFSIZE);
+          snprintf(newhost, NEWHOST_BUFSIZE, "%s", conn->ip_addr_str);
         }
       }
       else
@@ -1817,7 +1848,7 @@ CURLcode Curl_ftp_nextconnect(struct connectdata *conn)
       return result;
 
     if(ftpcode>=400) {
-      failf(data, "Failed FTP upload:%s", buf+3);
+      failf(data, "Failed FTP upload: %03d", ftpcode);
       /* oops, we never close the sockets! */
       return CURLE_FTP_COULDNT_STOR_FILE;
     }
@@ -2011,7 +2042,7 @@ CURLcode Curl_ftp_nextconnect(struct connectdata *conn)
           return result;
 
         if(ftpcode != 350) {
-          failf(data, "Couldn't use REST: %s", buf+4);
+          failf(data, "Couldn't use REST: %03d", ftpcode);
           return CURLE_FTP_COULDNT_USE_REST;
         }
       }
@@ -2125,7 +2156,7 @@ CURLcode Curl_ftp_nextconnect(struct connectdata *conn)
         ftp->no_transfer = TRUE; /* don't think we should download anything */
       }
       else {
-        failf(data, "%s", buf+4);
+        failf(data, "RETR failed: %03d", ftpcode);
         return CURLE_FTP_COULDNT_RETR_FILE;
       }
     }
@@ -2356,7 +2387,7 @@ CURLcode Curl_ftpsendf(struct connectdata *conn,
       break;
 
     if(conn->data->set.verbose)
-      Curl_debug(conn->data, CURLINFO_HEADER_OUT, sptr, bytes_written, conn->host.dispname);
+      Curl_debug(conn->data, CURLINFO_HEADER_OUT, sptr, bytes_written, conn);
 
     if(bytes_written != (ssize_t)write_len) {
       write_len -= bytes_written;
@@ -2542,6 +2573,9 @@ static CURLcode ftp_3rdparty_pretransfer(struct connectdata *conn)
   struct SessionHandle *data = conn->data;
   struct connectdata *sec_conn = conn->sec_conn;
 
+  conn->xfertype = TARGET3RD;
+  sec_conn->xfertype = SOURCE3RD;
+
   /* sets transfer type */
   result = ftp_transfertype(conn, data->set.ftp_ascii);
   if (result)
@@ -2585,7 +2619,7 @@ static CURLcode ftp_3rdparty_transfer(struct connectdata *conn)
   struct connectdata *pasv_conn;
   struct connectdata *port_conn;
 
-  if (data->set.pasvHost == CURL_TARGET_PASV) {
+  if (data->set.ftpport == NULL) {
     pasv_conn = conn;
     port_conn = sec_conn;
   }
@@ -2601,9 +2635,11 @@ static CURLcode ftp_3rdparty_transfer(struct connectdata *conn)
   /* sets the passive mode */
   FTPSENDF(pasv_conn, "%s", "PASV");
   result = Curl_GetFTPResponse(&nread, pasv_conn, &ftpcode);
-  if (result) return result;
+  if (result)
+    return result;
+
   if (ftpcode != 227) {
-    failf(data, "Odd return code after PASV:%s", buf + 3);
+    failf(data, "Odd return code after PASV: %03d", ftpcode);
     return CURLE_FTP_WEIRD_PASV_REPLY;
   }
 
@@ -2615,7 +2651,7 @@ static CURLcode ftp_3rdparty_transfer(struct connectdata *conn)
   }
 
   if (!*str) {
-    failf(pasv_conn->data, "Couldn't interpret this 227-reply: %s", buf);
+    failf(pasv_conn->data, "Couldn't interpret the 227-reply");
     return CURLE_FTP_WEIRD_227_FORMAT;
   }
 
@@ -2629,7 +2665,7 @@ static CURLcode ftp_3rdparty_transfer(struct connectdata *conn)
     return result;
 
   if (ftpcode != 200) {
-    failf(data, "PORT command attempts failed:%s", buf + 3);
+    failf(data, "PORT command attempts failed: %03d", ftpcode);
     return CURLE_FTP_PORT_FAILED;
   }
 
@@ -2637,41 +2673,44 @@ static CURLcode ftp_3rdparty_transfer(struct connectdata *conn)
   stor_cmd = data->set.ftp_append?"APPE":"STOR";
 
   /* transfers file between remote hosts */
-  FTPSENDF(sec_conn, "RETR %s", data->set.source_path);
+  /* FIX: this should send a series of CWD commands and then RETR only the
+     ftp->file file. The conn->path "full path" is not unescaped. Test case
+     230 tests this. */
+  FTPSENDF(sec_conn, "RETR %s", sec_conn->path);
 
-  if(data->set.pasvHost == CURL_TARGET_PASV) {
+  if(!data->set.ftpport) {
 
     result = Curl_GetFTPResponse(&nread, sec_conn, &ftpcode);
     if (result)
       return result;
 
-    if (ftpcode != 150) {
+    if((ftpcode != 150) && (ftpcode != 125)) {
-      failf(data, "Failed RETR: %s", buf + 4);
+      failf(data, "Failed RETR: %03d", ftpcode);
       return CURLE_FTP_COULDNT_RETR_FILE;
     }
 
-    result = Curl_ftpsendf(conn, "%s %s", stor_cmd, conn->path);
+    result = Curl_ftpsendf(conn, "%s %s", stor_cmd, conn->proto.ftp->file);
     if(CURLE_OK == result)
       result = Curl_GetFTPResponse(&nread, conn, &ftpcode);
     if (result)
       return result;
 
-    if (ftpcode != 150) {
+    if (ftpcode >= 400) {
-      failf(data, "Failed FTP upload: %s", buf + 4);
+      failf(data, "Failed FTP upload: %03d", ftpcode);
       return CURLE_FTP_COULDNT_STOR_FILE;
     }
 
   }
   else {
 
-    result = Curl_ftpsendf(conn, "%s %s", stor_cmd, conn->path);
+    result = Curl_ftpsendf(conn, "%s %s", stor_cmd, conn->proto.ftp->file);
     if(CURLE_OK == result)
       result = Curl_GetFTPResponse(&nread, sec_conn, &ftpcode);
     if (result)
       return result;
 
-    if (ftpcode != 150) {
+    if (ftpcode >= 400) {
-      failf(data, "Failed FTP upload: %s", buf + 4);
+      failf(data, "Failed FTP upload: %03d", ftpcode);
       return CURLE_FTP_COULDNT_STOR_FILE;
     }
 
@@ -2679,8 +2718,8 @@ static CURLcode ftp_3rdparty_transfer(struct connectdata *conn)
     if (result)
       return result;
 
-    if (ftpcode != 150) {
+    if((ftpcode != 150) && (ftpcode != 125)) {
-      failf(data, "Failed FTP upload: %s", buf + 4);
+      failf(data, "Failed FTP upload: %03d", ftpcode);
       return CURLE_FTP_COULDNT_STOR_FILE;
     }
   }
@@ -2715,10 +2754,9 @@ CURLcode ftp_parse_url_path(struct connectdata *conn)
 
   ftp->dirdepth = 0;
   ftp->diralloc = 5; /* default dir depth to allocate */
-  ftp->dirs = (char **)malloc(ftp->diralloc * sizeof(ftp->dirs[0]));
+  ftp->dirs = (char **)calloc(ftp->diralloc, sizeof(ftp->dirs[0]));
   if(!ftp->dirs)
     return CURLE_OUT_OF_MEMORY;
-  ftp->dirs[0] = NULL; /* to start with */
 
   /* parse the URL path into separate path components */
   while((slash_pos=strchr(cur_pos, '/'))) {
@@ -2738,6 +2776,10 @@ CURLcode ftp_parse_url_path(struct connectdata *conn)
         freedirs(ftp);
         return CURLE_OUT_OF_MEMORY;
       }
+      if (isBadFtpString(ftp->dirs[ftp->dirdepth])) {
+        freedirs(ftp);
+        return CURLE_URL_MALFORMAT;
+      }
     }
     else {
       cur_pos = slash_pos + 1; /* jump to the rest of the string */
@@ -2752,6 +2794,7 @@ CURLcode ftp_parse_url_path(struct connectdata *conn)
         ftp->diralloc *= 2; /* double the size each time */
         bigger = realloc(ftp->dirs, ftp->diralloc * sizeof(ftp->dirs[0]));
         if(!bigger) {
+          ftp->dirdepth--;
           freedirs(ftp);
           return CURLE_OUT_OF_MEMORY;
         }
@@ -2769,6 +2812,10 @@ CURLcode ftp_parse_url_path(struct connectdata *conn)
       failf(data, "no memory");
       return CURLE_OUT_OF_MEMORY;
     }
+    if (isBadFtpString(ftp->file)) {
+      freedirs(ftp);
+      return CURLE_URL_MALFORMAT;
+    }
   }
   else
     ftp->file=NULL; /* instead of point to a zero byte, we make it a NULL

lib/hash.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -50,12 +50,11 @@ hash_str(const char *key, size_t key_length)
 static void
 hash_element_dtor(void *user, void *element)
 {
-  curl_hash         *h = (curl_hash *) user;
+  struct curl_hash *h = (struct curl_hash *) user;
-  curl_hash_element *e = (curl_hash_element *) element;
+  struct curl_hash_element *e = (struct curl_hash_element *) element;
 
-  if (e->key) {
+  if (e->key)
     free(e->key);
-  }
 
   h->dtor(e->ptr);
 
@@ -64,7 +63,7 @@ hash_element_dtor(void *user, void *element)
 
 /* return 1 on error, 0 is fine */
 int
-Curl_hash_init(curl_hash *h, int slots, curl_hash_dtor dtor)
+Curl_hash_init(struct curl_hash *h, int slots, curl_hash_dtor dtor)
 {
   int i;
 
@@ -72,7 +71,7 @@ Curl_hash_init(curl_hash *h, int slots, curl_hash_dtor dtor)
   h->size = 0;
   h->slots = slots;
 
-  h->table = (curl_llist **) malloc(slots * sizeof(curl_llist *));
+  h->table = (struct curl_llist **) malloc(slots * sizeof(struct curl_llist *));
   if(h->table) {
     for (i = 0; i < slots; ++i) {
       h->table[i] = Curl_llist_alloc((curl_llist_dtor) hash_element_dtor);
@@ -89,12 +88,12 @@ Curl_hash_init(curl_hash *h, int slots, curl_hash_dtor dtor)
     return 1; /* failure */
 }
 
-curl_hash *
+struct curl_hash *
 Curl_hash_alloc(int slots, curl_hash_dtor dtor)
 {
-  curl_hash *h;
+  struct curl_hash *h;
 
-  h = (curl_hash *) malloc(sizeof(curl_hash));
+  h = (struct curl_hash *) malloc(sizeof(struct curl_hash));
   if (h) {
     if(Curl_hash_init(h, slots, dtor)) {
       /* failure */
@@ -118,11 +117,11 @@ hash_key_compare(char *key1, size_t key1_len, char *key2, size_t key2_len)
   return 0;
 }
 
-static curl_hash_element *
+static struct curl_hash_element *
 mk_hash_element(char *key, size_t key_len, const void *p)
 {
-  curl_hash_element *he =
+  struct curl_hash_element *he =
-    (curl_hash_element *) malloc(sizeof(curl_hash_element));
+    (struct curl_hash_element *) malloc(sizeof(struct curl_hash_element));
 
   if(he) {
     char *dup = strdup(key);
@@ -147,14 +146,14 @@ mk_hash_element(char *key, size_t key_len, const void *p)
 /* Return the data in the hash. If there already was a match in the hash,
    that data is returned. */
 void *
-Curl_hash_add(curl_hash *h, char *key, size_t key_len, void *p)
+Curl_hash_add(struct curl_hash *h, char *key, size_t key_len, void *p)
 {
-  curl_hash_element  *he;
+  struct curl_hash_element  *he;
-  curl_llist_element *le;
+  struct curl_llist_element *le;
-  curl_llist *l = FETCH_LIST(h, key, key_len);
+  struct curl_llist *l = FETCH_LIST(h, key, key_len);
 
   for (le = l->head; le; le = le->next) {
-    he = (curl_hash_element *) le->ptr;
+    he = (struct curl_hash_element *) le->ptr;
     if (hash_key_compare(he->key, he->key_len, key, key_len)) {
       h->dtor(p);     /* remove the NEW entry */
       return he->ptr; /* return the EXISTING entry */
@@ -181,11 +180,11 @@ Curl_hash_add(curl_hash *h, char *key, size_t key_len, void *p)
 }
 
 void *
-Curl_hash_pick(curl_hash *h, char *key, size_t key_len)
+Curl_hash_pick(struct curl_hash *h, char *key, size_t key_len)
 {
-  curl_llist_element *le;
+  struct curl_llist_element *le;
-  curl_hash_element  *he;
+  struct curl_hash_element  *he;
-  curl_llist *l = FETCH_LIST(h, key, key_len);
+  struct curl_llist *l = FETCH_LIST(h, key, key_len);
 
   for (le = l->head;
        le;
@@ -204,7 +203,7 @@ void
 Curl_hash_apply(curl_hash *h, void *user,
                 void (*cb)(void *user, void *ptr))
 {
-  curl_llist_element  *le;
+  struct curl_llist_element  *le;
   int                  i;
 
   for (i = 0; i < h->slots; ++i) {
@@ -219,7 +218,7 @@ Curl_hash_apply(curl_hash *h, void *user,
 #endif
 
 void
-Curl_hash_clean(curl_hash *h)
+Curl_hash_clean(struct curl_hash *h)
 {
   int i;
 
@@ -231,19 +230,19 @@ Curl_hash_clean(curl_hash *h)
 }
 
 void
-Curl_hash_clean_with_criterium(curl_hash *h, void *user,
+Curl_hash_clean_with_criterium(struct curl_hash *h, void *user,
                                int (*comp)(void *, void *))
 {
-  curl_llist_element *le;
+  struct curl_llist_element *le;
-  curl_llist_element *lnext;
+  struct curl_llist_element *lnext;
-  curl_llist *list;
+  struct curl_llist *list;
   int i;
 
   for (i = 0; i < h->slots; ++i) {
     list = h->table[i];
     le = list->head; /* get first list entry */
     while(le) {
-      curl_hash_element *he = le->ptr;
+      struct curl_hash_element *he = le->ptr;
       lnext = le->next;
       /* ask the callback function if we shall remove this entry or not */
       if (comp(user, he->ptr)) {
@@ -256,7 +255,7 @@ Curl_hash_clean_with_criterium(curl_hash *h, void *user,
 }
 
 void
-Curl_hash_destroy(curl_hash *h)
+Curl_hash_destroy(struct curl_hash *h)
 {
   if (!h)
     return;

lib/hash.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -31,30 +31,31 @@
 
 typedef void (*curl_hash_dtor)(void *);
 
-typedef struct _curl_hash {
+struct curl_hash {
-  curl_llist     **table;
+  struct curl_llist **table;
   curl_hash_dtor   dtor;
-  int              slots;
+  int slots;
-  size_t           size;
+  size_t size;
-} curl_hash;
+};
 
-typedef struct _curl_hash_element {
+struct curl_hash_element {
   void   *ptr;
   char   *key;
   size_t key_len;
-} curl_hash_element;
+};
 
 
-int Curl_hash_init(curl_hash *, int, curl_hash_dtor);
+int Curl_hash_init(struct curl_hash *, int, curl_hash_dtor);
-curl_hash *Curl_hash_alloc(int, curl_hash_dtor);
+struct curl_hash *Curl_hash_alloc(int, curl_hash_dtor);
-void *Curl_hash_add(curl_hash *, char *, size_t, void *);
+void *Curl_hash_add(struct curl_hash *, char *, size_t, void *);
-int Curl_hash_delete(curl_hash *h, char *key, size_t key_len);
+int Curl_hash_delete(struct curl_hash *h, char *key, size_t key_len);
-void *Curl_hash_pick(curl_hash *, char *, size_t);
+void *Curl_hash_pick(struct curl_hash *, char *, size_t);
-void Curl_hash_apply(curl_hash *h, void *user,
+void Curl_hash_apply(struct curl_hash *h, void *user,
                      void (*cb)(void *user, void *ptr));
-int Curl_hash_count(curl_hash *h);
+int Curl_hash_count(struct curl_hash *h);
-void Curl_hash_clean(curl_hash *h);
+void Curl_hash_clean(struct curl_hash *h);
-void Curl_hash_clean_with_criterium(curl_hash *h, void *user, int (*comp)(void *, void *));
+void Curl_hash_clean_with_criterium(struct curl_hash *h, void *user,
-void Curl_hash_destroy(curl_hash *h);
+                                    int (*comp)(void *, void *));
+void Curl_hash_destroy(struct curl_hash *h);
 
 #endif

lib/hostares.c

@@ -249,7 +249,7 @@ CURLcode Curl_wait_for_resolv(struct connectdata *conn,
 
     /* close the connection, since we can't return failure here without
        cleaning up this connection properly */
-    Curl_disconnect(conn);
+    conn->bits.close = TRUE;
   }
 
   return rc;
@@ -291,7 +291,7 @@ Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
 
     /* areschannel is already setup in the Curl_open() function */
     ares_gethostbyname(data->state.areschannel, hostname, PF_INET,
-                       Curl_addrinfo4_callback, conn);
+                       (ares_host_callback)Curl_addrinfo4_callback, conn);
 
     *waitp = TRUE; /* please wait for the response */
   }

lib/hostasyn.c

@@ -108,12 +108,13 @@
  *
  * The storage operation locks and unlocks the DNS cache.
  */
-static void addrinfo_callback(void *arg, /* "struct connectdata *" */
+static CURLcode addrinfo_callback(void *arg, /* "struct connectdata *" */
-                              int status,
+                                  int status,
-                              void *addr)
+                                  void *addr)
 {
   struct connectdata *conn = (struct connectdata *)arg;
   struct Curl_dns_entry *dns = NULL;
+  CURLcode rc = CURLE_OK;
 
   conn->async.status = status;
 
@@ -135,13 +136,17 @@ static void addrinfo_callback(void *arg, /* "struct connectdata *" */
       dns = Curl_cache_addr(data, ai,
                             conn->async.hostname,
                             conn->async.port);
-      if(!dns)
+      if(!dns) {
         /* failed to store, cleanup and return error */
         Curl_freeaddrinfo(ai);
+        rc = CURLE_OUT_OF_MEMORY;
+      }
 
       if(data->share)
         Curl_share_unlock(data, CURL_LOCK_DATA_DNS);
     }
+    else
+      rc = CURLE_OUT_OF_MEMORY;
   }
 
   conn->async.dns = dns;
@@ -153,21 +158,22 @@ static void addrinfo_callback(void *arg, /* "struct connectdata *" */
 
   /* ipv4: The input hostent struct will be freed by ares when we return from
      this function */
+  return rc;
 }
 
-void Curl_addrinfo4_callback(void *arg, /* "struct connectdata *" */
+CURLcode Curl_addrinfo4_callback(void *arg, /* "struct connectdata *" */
-                             int status,
+                                 int status,
-                             struct hostent *hostent)
+                                 struct hostent *hostent)
 {
-  addrinfo_callback(arg, status, hostent);
+  return addrinfo_callback(arg, status, hostent);
 }
 
 #ifdef CURLRES_IPV6
-void Curl_addrinfo6_callback(void *arg, /* "struct connectdata *" */
+CURLcode Curl_addrinfo6_callback(void *arg, /* "struct connectdata *" */
-                             int status,
+                                 int status,
-                             struct addrinfo *ai)
+                                 struct addrinfo *ai)
 {
-  addrinfo_callback(arg, status, ai);
+  return addrinfo_callback(arg, status, ai);
 }
 #endif
 

lib/hostip.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -131,7 +131,7 @@
  */
 
 /* These two symbols are for the global DNS cache */
-static curl_hash hostname_cache;
+static struct curl_hash hostname_cache;
 static int host_cache_initialized;
 
 static void freednsentry(void *freethis);
@@ -152,7 +152,7 @@ void Curl_global_host_cache_init(void)
 /*
  * Return a pointer to the global cache
  */
-curl_hash *Curl_global_host_cache_get(void)
+struct curl_hash *Curl_global_host_cache_get(void)
 {
   return &hostname_cache;
 }
@@ -244,7 +244,7 @@ hostcache_timestamp_remove(void *datap, void *hc)
  * Prune the DNS cache. This assumes that a lock has already been taken.
  */
 static void
-hostcache_prune(curl_hash *hostcache, int cache_timeout, time_t now)
+hostcache_prune(struct curl_hash *hostcache, int cache_timeout, time_t now)
 {
   struct hostcache_prune_data user;
 
@@ -507,7 +507,7 @@ static void freednsentry(void *freethis)
 /*
  * Curl_mk_dnscache() creates a new DNS cache and returns the handle for it.
  */
-curl_hash *Curl_mk_dnscache(void)
+struct curl_hash *Curl_mk_dnscache(void)
 {
   return Curl_hash_alloc(7, freednsentry);
 }

lib/hostip.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -112,7 +112,7 @@ struct connectdata;
 
 void Curl_global_host_cache_init(void);
 void Curl_global_host_cache_dtor(void);
-curl_hash *Curl_global_host_cache_get(void);
+struct curl_hash *Curl_global_host_cache_get(void);
 
 #define Curl_global_host_cache_use(__p) ((__p)->set.global_dns_cache)
 
@@ -176,7 +176,7 @@ void Curl_scan_cache_used(void *user, void *ptr);
 void Curl_freeaddrinfo(Curl_addrinfo *freeaddr);
 
 /* make a new dns cache and return the handle */
-curl_hash *Curl_mk_dnscache(void);
+struct curl_hash *Curl_mk_dnscache(void);
 
 /* prune old entries from the DNS cache */
 void Curl_hostcache_prune(struct SessionHandle *data);
@@ -199,14 +199,14 @@ int curl_dogetnameinfo(const struct sockaddr *sa, socklen_t salen,
 
 /* This is the callback function that is used when we build with asynch
    resolve, ipv4 */
-void Curl_addrinfo4_callback(void *arg,
+CURLcode Curl_addrinfo4_callback(void *arg,
-                            int status,
+                                 int status,
-                            struct hostent *hostent);
+                                 struct hostent *hostent);
 /* This is the callback function that is used when we build with asynch
    resolve, ipv6 */
-void Curl_addrinfo6_callback(void *arg,
+CURLcode Curl_addrinfo6_callback(void *arg,
-                            int status,
+                                 int status,
-                            struct addrinfo *ai);
+                                 struct addrinfo *ai);
 
 
 /* [ipv4 only] Creates a Curl_addrinfo struct from a numerical-only IP

lib/hostthre.c

@@ -184,11 +184,13 @@ static unsigned __stdcall gethostbyname_thread (void *arg)
    * due to a resolver timeout.
    */
   HANDLE mutex_waiting = NULL;
-  if (!DuplicateHandle(GetCurrentProcess(), td->mutex_waiting,
+  HANDLE curr_proc = GetCurrentProcess();
-                       GetCurrentProcess(), &mutex_waiting, 0, FALSE,
+
+  if (!DuplicateHandle(curr_proc, td->mutex_waiting,
+                       curr_proc, &mutex_waiting, 0, FALSE,
                        DUPLICATE_SAME_ACCESS)) {
     /* failed to duplicate the mutex, no point in continuing */
-    return 0;
+    return -1;
   }
 
   /* Sharing the same _iob[] element with our parent thread should
@@ -212,12 +214,10 @@ static unsigned __stdcall gethostbyname_thread (void *arg)
     SetEvent(td->event_resolved);
 
     if (he) {
-      Curl_addrinfo4_callback(conn, CURL_ASYNC_SUCCESS, he);
+      rc = Curl_addrinfo4_callback(conn, CURL_ASYNC_SUCCESS, he);
-      rc = 1;
     }
     else {
-      Curl_addrinfo4_callback(conn, (int)WSAGetLastError(), NULL);
+      rc = Curl_addrinfo4_callback(conn, (int)WSAGetLastError(), NULL);
-      rc = 0;
     }
     TRACE(("Winsock-error %d, addr %s\n", conn->async.status,
            he ? inet_ntoa(*(struct in_addr*)he->h_addr) : "unknown"));
@@ -252,14 +252,18 @@ static unsigned __stdcall getaddrinfo_thread (void *arg)
    * due to a resolver timeout.
    */
   HANDLE mutex_waiting = NULL;
-  if (!DuplicateHandle(GetCurrentProcess(), td->mutex_waiting,
+  HANDLE curr_proc = GetCurrentProcess();
-                       GetCurrentProcess(), &mutex_waiting, 0, FALSE,
+
+  if (!DuplicateHandle(curr_proc, td->mutex_waiting,
+                       curr_proc, &mutex_waiting, 0, FALSE,
                        DUPLICATE_SAME_ACCESS)) {
     /* failed to duplicate the mutex, no point in continuing */
-    return 0;
+    return -1;
   }
 
+#ifndef _WIN32_WCE
   *stderr = *td->stderr_file;
+#endif
 
   itoa(conn->async.port, service, 10);
 
@@ -280,10 +284,10 @@ static unsigned __stdcall getaddrinfo_thread (void *arg)
 #ifdef DEBUG_THREADING_GETADDRINFO
       dump_addrinfo (conn, res);
 #endif
-      Curl_addrinfo6_callback(conn, CURL_ASYNC_SUCCESS, res);
+      rc = Curl_addrinfo6_callback(conn, CURL_ASYNC_SUCCESS, res);
     }
     else {
-      Curl_addrinfo6_callback(conn, (int)WSAGetLastError(), NULL);
+      rc = Curl_addrinfo6_callback(conn, (int)WSAGetLastError(), NULL);
       TRACE(("Winsock-error %d, no address\n", conn->async.status));
     }
   }
@@ -383,7 +387,6 @@ static bool init_resolve_thread (struct connectdata *conn,
                                          (LPTHREAD_START_ROUTINE) THREAD_FUNC,
                                          conn, 0, &td->thread_id);
 #else
-
   td->thread_hnd = (HANDLE) _beginthreadex(NULL, 0, THREAD_FUNC,
                                            conn, 0, &td->thread_id);
 #endif
@@ -488,7 +491,11 @@ CURLcode Curl_wait_for_resolv(struct connectdata *conn,
 
   if (!conn->async.dns) {
     /* a name was not resolved */
-    if (td->thread_status == (DWORD)-1 || conn->async.status == NO_DATA) {
+    if (td->thread_status == CURLE_OUT_OF_MEMORY) {
+      rc = CURLE_OUT_OF_MEMORY;
+      failf(data, "Could not resolve host: %s", curl_easy_strerror(rc));
+    }
+    else if (td->thread_status == (DWORD)-1 || conn->async.status == NO_DATA) {
       failf(data, "Resolving host timed out: %s", conn->host.name);
       rc = CURLE_OPERATION_TIMEDOUT;
     }
@@ -503,10 +510,8 @@ CURLcode Curl_wait_for_resolv(struct connectdata *conn,
 
   destroy_thread_data(&conn->async);
 
-  if(CURLE_OK != rc)
+  if(!conn->async.dns)
-    /* close the connection, since we must not return failure from here
+    conn->bits.close = TRUE;
-       without cleaning up this connection properly */
-    Curl_disconnect(conn);
 
   return (rc);
 }

lib/http.c

@@ -858,8 +858,7 @@ CURLcode add_buffer_send(send_buffer *in,
 
     if(conn->data->set.verbose)
       /* this data _may_ contain binary stuff */
-      Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, amount,
+      Curl_debug(conn->data, CURLINFO_HEADER_OUT, ptr, amount, conn);
-                 conn->host.dispname);
 
     *bytes_written += amount;
 
@@ -1140,7 +1139,7 @@ CURLcode Curl_ConnectHTTPProxyTunnel(struct connectdata *conn,
               /* output debug if that is requested */
               if(data->set.verbose)
                 Curl_debug(data, CURLINFO_HEADER_IN, line_start, perline,
-                           conn->host.dispname);
+                           conn);
 
               /* send the header to the callback */
               writetype = CLIENTWRITE_HEADER;
@@ -1275,7 +1274,6 @@ CURLcode Curl_http_done(struct connectdata *conn,
 {
   struct SessionHandle *data;
   struct HTTP *http;
-  (void)status; /* no use for us */
 
   data=conn->data;
   http=conn->proto.http;
@@ -1292,7 +1290,7 @@ CURLcode Curl_http_done(struct connectdata *conn,
 
     free(buff->buffer);
     free(buff);
-    http->send_buffer = NULL; /* cleaer the pointer */
+    http->send_buffer = NULL; /* clear the pointer */
   }
 
   if(HTTPREQ_POST_FORM == data->set.httpreq) {
@@ -1308,6 +1306,9 @@ CURLcode Curl_http_done(struct connectdata *conn,
   else if(HTTPREQ_PUT == data->set.httpreq)
     conn->bytecount = http->readbytecount + http->writebytecount;
 
+  if (status != CURLE_OK)
+    return (status);
+
   if(!conn->bits.retry &&
      ((http->readbytecount +
        conn->headerbytecount -

lib/llist.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -33,7 +33,7 @@
 #include "memdebug.h"
 
 void
-Curl_llist_init(curl_llist *l, curl_llist_dtor dtor)
+Curl_llist_init(struct curl_llist *l, curl_llist_dtor dtor)
 {
   l->size = 0;
   l->dtor = dtor;
@@ -41,12 +41,12 @@ Curl_llist_init(curl_llist *l, curl_llist_dtor dtor)
   l->tail = NULL;
 }
 
-curl_llist *
+struct curl_llist *
 Curl_llist_alloc(curl_llist_dtor dtor)
 {
-  curl_llist *list;
+  struct curl_llist *list;
 
-  list = (curl_llist *)malloc(sizeof(curl_llist));
+  list = (struct curl_llist *)malloc(sizeof(struct curl_llist));
   if(NULL == list)
     return NULL;
 
@@ -59,10 +59,11 @@ Curl_llist_alloc(curl_llist_dtor dtor)
  * Curl_llist_insert_next() returns 1 on success and 0 on failure.
  */
 int
-Curl_llist_insert_next(curl_llist *list, curl_llist_element *e, const void *p)
+Curl_llist_insert_next(struct curl_llist *list, struct curl_llist_element *e,
+                       const void *p)
 {
-  curl_llist_element *ne =
+  struct curl_llist_element *ne =
-    (curl_llist_element *) malloc(sizeof(curl_llist_element));
+    (struct curl_llist_element *) malloc(sizeof(struct curl_llist_element));
   if(!ne)
     return 0;
 
@@ -91,7 +92,8 @@ Curl_llist_insert_next(curl_llist *list, curl_llist_element *e, const void *p)
 }
 
 int
-Curl_llist_remove(curl_llist *list, curl_llist_element *e, void *user)
+Curl_llist_remove(struct curl_llist *list, struct curl_llist_element *e,
+                  void *user)
 {
   if (e == NULL || list->size == 0)
     return 1;
@@ -119,7 +121,7 @@ Curl_llist_remove(curl_llist *list, curl_llist_element *e, void *user)
 }
 
 void
-Curl_llist_destroy(curl_llist *list, void *user)
+Curl_llist_destroy(struct curl_llist *list, void *user)
 {
   if(list) {
     while (list->size > 0)

lib/llist.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -28,29 +28,33 @@
 
 typedef void (*curl_llist_dtor)(void *, void *);
 
-typedef struct _curl_llist_element {
+struct curl_llist_element {
   void *ptr;
 
-  struct _curl_llist_element *prev;
+  struct curl_llist_element *prev;
-  struct _curl_llist_element *next;
+  struct curl_llist_element *next;
-} curl_llist_element;
+};
 
-typedef struct _curl_llist {
+struct curl_llist {
-  curl_llist_element *head;
+  struct curl_llist_element *head;
-  curl_llist_element *tail;
+  struct curl_llist_element *tail;
 
   curl_llist_dtor dtor;
 
   size_t size;
-} curl_llist;
+};
 
-void Curl_llist_init(curl_llist *, curl_llist_dtor);
+void Curl_llist_init(struct curl_llist *, curl_llist_dtor);
-curl_llist *Curl_llist_alloc(curl_llist_dtor);
+struct curl_llist *Curl_llist_alloc(curl_llist_dtor);
-int Curl_llist_insert_next(curl_llist *, curl_llist_element *, const void *);
+int Curl_llist_insert_next(struct curl_llist *, struct curl_llist_element *,
-int Curl_llist_insert_prev(curl_llist *, curl_llist_element *, const void *);
+                           const void *);
-int Curl_llist_remove(curl_llist *, curl_llist_element *, void *);
+int Curl_llist_insert_prev(struct curl_llist *, struct curl_llist_element *,
-int Curl_llist_remove_next(curl_llist *, curl_llist_element *, void *);
+                           const void *);
-size_t Curl_llist_count(curl_llist *);
+int Curl_llist_remove(struct curl_llist *, struct curl_llist_element *,
-void Curl_llist_destroy(curl_llist *, void *);
+                      void *);
+int Curl_llist_remove_next(struct curl_llist *, struct curl_llist_element *,
+                           void *);
+size_t Curl_llist_count(struct curl_llist *);
+void Curl_llist_destroy(struct curl_llist *, void *);
 
 #endif

lib/multi.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -43,6 +43,8 @@
 #include "connect.h"
 #include "progress.h"
 #include "memory.h"
+#include "easyif.h"
+#include "multiif.h"
 
 /* The last #include file should be: */
 #include "memdebug.h"
@@ -106,7 +108,7 @@ struct Curl_multi {
   int num_msgs; /* total amount of messages in the easy handles */
 
   /* Hostname cache */
-  curl_hash *hostcache;
+  struct curl_hash *hostcache;
 };
 
 
@@ -174,6 +176,8 @@ CURLMcode curl_multi_add_handle(CURLM *multi_handle,
   if(easy->next)
     easy->next->prev = easy;
 
+  Curl_easy_addmulti(easy_handle, multi_handle);
+
   /* increase the node-counter */
   multi->num_easy++;
 
@@ -207,6 +211,8 @@ CURLMcode curl_multi_remove_handle(CURLM *multi_handle,
 
     /* clear out the usage of the shared DNS cache */
     easy->easy_handle->hostcache = NULL;
+    Curl_easy_addmulti(easy->easy_handle, NULL); /* clear the association
+                                                    to this multi handle */
 
     /* make the previous node point to our next */
     if(easy->prev)
@@ -336,7 +342,7 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles)
           gotourl = strdup(easy->easy_handle->change.url);
           if(gotourl) {
             easy->easy_handle->change.url_changed = FALSE;
-            easy->result = Curl_follow(easy->easy_handle, gotourl);
+            easy->result = Curl_follow(easy->easy_handle, gotourl, FALSE);
             if(CURLE_OK == easy->result)
               easy->state = CURLM_STATE_CONNECT;
             else
@@ -456,6 +462,13 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles)
             }
           }
         }
+        else {
+          /* failure detected */
+          Curl_posttransfer(easy->easy_handle);
+          Curl_done(&easy->easy_conn, easy->result);
+          Curl_disconnect(easy->easy_conn); /* close the connection */
+          easy->easy_conn = NULL;           /* no more connection */
+        }
         break;
 
       case CURLM_STATE_DO_MORE:
@@ -500,25 +513,35 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles)
           Curl_done(&easy->easy_conn, easy->result);
         }
 
-        /* after the transfer is done, go DONE */
         else if(TRUE == done) {
+          char *newurl;
+          bool retry = Curl_retry_request(easy->easy_conn, &newurl);
 
           /* call this even if the readwrite function returned error */
           Curl_posttransfer(easy->easy_handle);
 
           /* When we follow redirects, must to go back to the CONNECT state */
-          if(easy->easy_conn->newurl) {
+          if(easy->easy_conn->newurl || retry) {
-            char *newurl = easy->easy_conn->newurl;
+            if(!retry) {
-            easy->easy_conn->newurl = NULL;
+              /* if the URL is a follow-location and not just a retried request
+                 then figure out the URL here */
+              newurl = easy->easy_conn->newurl;
+              easy->easy_conn->newurl = NULL;
+            }
             easy->result = Curl_done(&easy->easy_conn, CURLE_OK);
             if(easy->result == CURLE_OK)
-              easy->result = Curl_follow(easy->easy_handle, newurl);
+              easy->result = Curl_follow(easy->easy_handle, newurl, retry);
             if(CURLE_OK == easy->result) {
               easy->state = CURLM_STATE_CONNECT;
               result = CURLM_CALL_MULTI_PERFORM;
             }
+            else
+              /* Since we "took it", we are in charge of freeing this on
+                 failure */
+              free(newurl);
           }
           else {
+            /* after the transfer is done, go DONE */
             easy->state = CURLM_STATE_DONE;
             result = CURLM_CALL_MULTI_PERFORM;
           }
@@ -584,6 +607,13 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles)
   return result;
 }
 
+/* This is called when an easy handle is cleanup'ed that is part of a multi
+   handle */
+void Curl_multi_rmeasy(void *multi_handle, CURL *easy_handle)
+{
+  curl_multi_remove_handle(multi_handle, easy_handle);
+}
+
 CURLMcode curl_multi_cleanup(CURLM *multi_handle)
 {
   struct Curl_multi *multi=(struct Curl_multi *)multi_handle;
@@ -600,6 +630,7 @@ CURLMcode curl_multi_cleanup(CURLM *multi_handle)
       nexteasy=easy->next;
       /* clear out the usage of the shared DNS cache */
       easy->easy_handle->hostcache = NULL;
+      Curl_easy_addmulti(easy->easy_handle, NULL); /* clear the association */
 
       if (easy->msg)
         free(easy->msg);

lib/multiif.h

@@ -0,0 +1,31 @@
+#ifndef __MULTIIF_H
+#define __MULTIIF_H
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ ***************************************************************************/
+
+/*
+ * Prototypes for library-wide functions provided by multi.c
+ */
+void Curl_multi_rmeasy(void *multi, CURL *data);
+
+#endif /* __MULTIIF_H */

lib/parsedate.c

@@ -86,11 +86,14 @@
 
 static time_t Curl_parsedate(const char *date);
 
-static const char *wkday[] = {"Mon", "Tue", "Wed", "Thu", "Fri", "Sat", "Sun"};
+static const char * const wkday[] =
-static const char *weekday[] = { "Monday", "Tuesday", "Wednesday", "Thursday",
+  {"Mon", "Tue", "Wed", "Thu", "Fri", "Sat", "Sun"};
+static const char * const weekday[] =
+  { "Monday", "Tuesday", "Wednesday", "Thursday",
                                  "Friday", "Saturday", "Sunday" };
-static const char *month[]= { "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul",
+static const char * const month[]=
-                              "Aug", "Sep", "Oct", "Nov", "Dec" };
+  { "Jan", "Feb", "Mar", "Apr", "May", "Jun",
+    "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" };
 
 struct tzinfo {
   const char *name;
@@ -153,7 +156,7 @@ static const struct tzinfo tz[]= {
 static int checkday(char *check, size_t len)
 {
   int i;
-  const char **what;
+  const char * const *what;
   bool found= FALSE;
   if(len > 3)
     what = &weekday[0];
@@ -172,7 +175,7 @@ static int checkday(char *check, size_t len)
 static int checkmonth(char *check)
 {
   int i;
-  const char **what;
+  const char * const *what;
   bool found= FALSE;
 
   what = &month[0];

lib/select.c

@@ -23,13 +23,14 @@
 
 #include "setup.h"
 
-#ifdef HAVE_SYS_SELECT_H
+#include <errno.h>
-#include <sys/select.h>
+
-#endif
 #ifdef HAVE_SYS_TYPES_H
 #include <sys/types.h>
 #endif
-
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
 #ifdef HAVE_SYS_TIME_H
 #include <sys/time.h>
 #endif
@@ -38,6 +39,15 @@
 #error "We can't compile without select() support!"
 #endif
 
+#ifdef __BEOS__
+/* BeOS has FD_SET defined in socket.h */
+#include <socket.h>
+#endif
+
+#include <curl/curl.h>
+
+#include "urldata.h"
+#include "connect.h"
 #include "select.h"
 
 #ifdef WIN32
@@ -76,7 +86,9 @@ int Curl_select(curl_socket_t readfd, curl_socket_t writefd, int timeout_ms)
     num++;
   }
 
-  r = poll(pfd, num, timeout_ms);
+  do {
+    r = poll(pfd, num, timeout_ms);
+  } while((r == -1) && (errno == EINTR));
 
   if (r < 0)
     return -1;
@@ -138,7 +150,9 @@ int Curl_select(curl_socket_t readfd, curl_socket_t writefd, int timeout_ms)
       maxfd = writefd;
   }
 
-  r = select(maxfd + 1, &fds_read, &fds_write, &fds_err, &timeout);
+  do {
+    r = select(maxfd + 1, &fds_read, &fds_write, &fds_err, &timeout);
+  } while((r == -1) && (Curl_ourerrno() == EINTR));
 
   if (r < 0)
     return -1;
@@ -175,8 +189,11 @@ int Curl_select(curl_socket_t readfd, curl_socket_t writefd, int timeout_ms)
  */
 int Curl_poll(struct pollfd ufds[], unsigned int nfds, int timeout_ms)
 {
+  int r;
 #ifdef HAVE_POLL_FINE
-    return poll(ufds, nfds, timeout_ms);
+  do {
+    r = poll(ufds, nfds, timeout_ms);
+  } while((r == -1) && (errno == EINTR));
 #else
   struct timeval timeout;
   struct timeval *ptimeout;
@@ -184,7 +201,6 @@ int Curl_poll(struct pollfd ufds[], unsigned int nfds, int timeout_ms)
   fd_set fds_write;
   fd_set fds_err;
   curl_socket_t maxfd;
-  int r;
   unsigned int i;
 
   FD_ZERO(&fds_read);
@@ -219,7 +235,9 @@ int Curl_poll(struct pollfd ufds[], unsigned int nfds, int timeout_ms)
     ptimeout = &timeout;
   }
 
-  r = select(maxfd + 1, &fds_read, &fds_write, &fds_err, ptimeout);
+  do {
+    r = select(maxfd + 1, &fds_read, &fds_write, &fds_err, ptimeout);
+  } while((r == -1) && (Curl_ourerrno() == EINTR));
 
   if (r < 0)
     return -1;
@@ -240,7 +258,6 @@ int Curl_poll(struct pollfd ufds[], unsigned int nfds, int timeout_ms)
     if (ufds[i].revents != 0)
       r++;
   }
-
-  return r;
 #endif
+  return r;
 }

lib/sendf.c

@@ -154,22 +154,22 @@ void Curl_infof(struct SessionHandle *data, const char *fmt, ...)
 void Curl_failf(struct SessionHandle *data, const char *fmt, ...)
 {
   va_list ap;
+  size_t len;
   va_start(ap, fmt);
+
+  vsnprintf(data->state.buffer, BUFSIZE, fmt, ap);
+
   if(data->set.errorbuffer && !data->state.errorbuf) {
-    vsnprintf(data->set.errorbuffer, CURL_ERROR_SIZE, fmt, ap);
+    snprintf(data->set.errorbuffer, CURL_ERROR_SIZE, "%s", data->state.buffer);
     data->state.errorbuf = TRUE; /* wrote error string */
   }
   if(data->set.verbose) {
-      size_t len;
+    len = strlen(data->state.buffer);
-
+    if(len < BUFSIZE - 1) {
-      vsnprintf(data->state.buffer, BUFSIZE, fmt, ap);
+      data->state.buffer[len] = '\n';
-      len = strlen(data->state.buffer);
+      data->state.buffer[++len] = '\0';
-
+    }
-      if(len < BUFSIZE - 1) {
+    Curl_debug(data, CURLINFO_TEXT, data->state.buffer, len, NULL);
-        data->state.buffer[len] = '\n';
-        data->state.buffer[++len] = '\0';
-      }
-      Curl_debug(data, CURLINFO_TEXT, data->state.buffer, len, NULL);
   }
 
   va_end(ap);
@@ -204,8 +204,7 @@ CURLcode Curl_sendf(curl_socket_t sockfd, struct connectdata *conn,
       break;
 
     if(data->set.verbose)
-      Curl_debug(data, CURLINFO_DATA_OUT, sptr, bytes_written,
+      Curl_debug(data, CURLINFO_DATA_OUT, sptr, bytes_written, conn);
-                 conn->host.dispname);
 
     if((size_t)bytes_written != write_len) {
       /* if not all was written at once, we must advance the pointer, decrease
@@ -468,18 +467,22 @@ static int showit(struct SessionHandle *data, curl_infotype type,
 }
 
 int Curl_debug(struct SessionHandle *data, curl_infotype type,
-               char *ptr, size_t size, char *host)
+               char *ptr, size_t size,
+               struct connectdata *conn)
 {
   int rc;
-  if(data->set.printhost && host) {
+  if(data->set.printhost && conn && conn->host.dispname) {
     char buffer[160];
     const char *t=NULL;
+    const char *w="Data";
     switch (type) {
     case CURLINFO_HEADER_IN:
+      w = "Header";
     case CURLINFO_DATA_IN:
       t = "from";
       break;
     case CURLINFO_HEADER_OUT:
+      w = "Header";
     case CURLINFO_DATA_OUT:
       t = "to";
       break;
@@ -488,7 +491,10 @@ int Curl_debug(struct SessionHandle *data, curl_infotype type,
     }
 
     if(t) {
-      snprintf(buffer, sizeof(buffer), "[Data %s %s]", t, host);
+      snprintf(buffer, sizeof(buffer), "[%s %s %s%s]", w, t,
+               conn->xfertype==NORMAL?"":
+               (conn->xfertype==SOURCE3RD?"source ":"target "),
+               conn->host.dispname);
       rc = showit(data, CURLINFO_TEXT, buffer, strlen(buffer));
       if(rc)
         return rc;

lib/sendf.h

@@ -62,7 +62,8 @@ CURLcode Curl_write(struct connectdata *conn,
 
 /* the function used to output verbose information */
 int Curl_debug(struct SessionHandle *handle, curl_infotype type,
-               char *data, size_t size, char *host);
+               char *data, size_t size,
+               struct connectdata *conn);
 
 
 #endif

lib/setup.h

@@ -160,17 +160,6 @@ typedef unsigned char bool;
 #define WIN32_LEAN_AND_MEAN  /* Prevent including <winsock*.h> in <windows.h> */
 #endif
 
-#if (defined(ENABLE_IPV6) || defined(CURLDEBUG)) && defined(_MSC_VER) && \
-    (!defined(_WIN32_WINNT) || _WIN32_WINNT < 0x0500)
-/*
- * Needed to pull in the real getaddrinfo() and not the inline version
- * in <wspiAPI.H> which doesn't support IPv6 (IPv4 only). <wspiAPI.H> is
- * included from <ws2tcpip.h> for <= 0x0500 SDKs.
- */
-#undef  _WIN32_WINNT
-#define _WIN32_WINNT 0x0501
-#endif
-
 #if HAVE_WINSOCK2_H
 #include <winsock2.h>        /* required by telnet.c */
 #endif

lib/share.h

@@ -8,7 +8,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -37,19 +37,12 @@ struct Curl_share {
   curl_unlock_function unlockfunc;
   void *clientdata;
 
-  curl_hash *hostcache;
+  struct curl_hash *hostcache;
   struct CookieInfo *cookies;
 };
 
-CURLSHcode Curl_share_lock (
+CURLSHcode Curl_share_lock (struct SessionHandle *, curl_lock_data,
-    struct SessionHandle *, 
+                            curl_lock_access);
-    curl_lock_data,
+CURLSHcode Curl_share_unlock (struct SessionHandle *, curl_lock_data);
-    curl_lock_access
-    );
-
-CURLSHcode Curl_share_unlock (
-    struct SessionHandle *, 
-    curl_lock_data
-    );
 
 #endif /* __CURL_SHARE_H */

lib/ssluse.c

@@ -1003,6 +1003,7 @@ static CURLcode verifyhost(struct connectdata *conn,
 #else
   struct in_addr addr;
 #endif
+  CURLcode res = CURLE_OK;
 
 #ifdef ENABLE_IPV6
   if(conn->bits.ipv6_ip &&
@@ -1131,8 +1132,7 @@ static CURLcode verifyhost(struct connectdata *conn,
       if(data->set.ssl.verifyhost > 1) {
         failf(data, "SSL: certificate subject name '%s' does not match "
               "target host name '%s'", peer_CN, conn->host.dispname);
-        OPENSSL_free(peer_CN);
+        res = CURLE_SSL_PEER_CERTIFICATE;
-        return CURLE_SSL_PEER_CERTIFICATE ;
       }
       else
         infof(data, "\t common name: %s (does not match '%s')\n",
@@ -1140,10 +1140,11 @@ static CURLcode verifyhost(struct connectdata *conn,
     }
     else {
       infof(data, "\t common name: %s (matched)\n", peer_CN);
-      OPENSSL_free(peer_CN);
     }
+    if(peer_CN)
+      OPENSSL_free(peer_CN);
   }
-  return CURLE_OK;
+  return res;
 }
 #endif
 

lib/transfer.c

@@ -285,7 +285,7 @@ CURLcode Curl_readwrite(struct connectdata *conn,
          read or we get a EWOULDBLOCK */
       do {
         size_t buffersize = data->set.buffer_size?
-          data->set.buffer_size:BUFSIZE -1;
+          data->set.buffer_size:BUFSIZE;
 
         /* receive data from the network! */
         int readrc = Curl_read(conn, conn->sockfd, k->buf, buffersize, &nread);
@@ -464,7 +464,6 @@ CURLcode Curl_readwrite(struct connectdata *conn,
 
                   k->write_after_100_header = FALSE;
                   k->keepon |= KEEP_WRITE;
-                  k->wkeepfd = k->writefd;
                 }
               }
               else
@@ -936,7 +935,7 @@ CURLcode Curl_readwrite(struct connectdata *conn,
 
             if(data->set.verbose)
               Curl_debug(data, CURLINFO_HEADER_IN,
-                         k->p, k->hbuflen, conn->host.dispname);
+                         k->p, k->hbuflen, conn);
 
             result = Curl_client_write(data, writetype, k->p, k->hbuflen);
             if(result)
@@ -1033,14 +1032,12 @@ CURLcode Curl_readwrite(struct connectdata *conn,
           if(data->set.verbose) {
             if(k->badheader) {
               Curl_debug(data, CURLINFO_DATA_IN, data->state.headerbuff,
-                         k->hbuflen, conn->host.dispname);
+                         k->hbuflen, conn);
               if(k->badheader == HEADER_PARTHEADER)
-                Curl_debug(data, CURLINFO_DATA_IN, k->str, nread,
+                Curl_debug(data, CURLINFO_DATA_IN, k->str, nread, conn);
-                           conn->host.dispname);
             }
             else
-              Curl_debug(data, CURLINFO_DATA_IN, k->str, nread,
+              Curl_debug(data, CURLINFO_DATA_IN, k->str, nread, conn);
-                         conn->host.dispname);
           }
 
 #ifndef CURL_DISABLE_HTTP
@@ -1192,7 +1189,6 @@ CURLcode Curl_readwrite(struct connectdata *conn,
                  go into the Expect: 100 state and await such a header */
               k->wait100_after_headers = FALSE; /* headers sent */
               k->write_after_100_header = TRUE; /* wait for the header */
-              k->wkeepfd = k->writefd;          /* set the keeper variable */
               k->keepon &= ~KEEP_WRITE;         /* disable writing */
               k->start100 = Curl_tvnow();       /* timeout count starts now */
               didwhat &= ~KEEP_WRITE;  /* we didn't write anything actually */
@@ -1272,7 +1268,7 @@ CURLcode Curl_readwrite(struct connectdata *conn,
         if(data->set.verbose)
           /* show the data before we change the pointer upload_fromhere */
           Curl_debug(data, CURLINFO_DATA_OUT, conn->upload_fromhere,
-                     bytes_written, conn->host.dispname);
+                     bytes_written, conn);
 
         if(conn->upload_present != bytes_written) {
           /* we only wrote a part of the buffer (if anything), deal with it! */
@@ -1336,7 +1332,6 @@ CURLcode Curl_readwrite(struct connectdata *conn,
         /* we've waited long enough, continue anyway */
         k->write_after_100_header = FALSE;
         k->keepon |= KEEP_WRITE;
-        k->wkeepfd = k->writefd;
       }
     }
   }
@@ -1463,12 +1458,6 @@ CURLcode Curl_readwrite_init(struct connectdata *conn)
         k->keepon |= KEEP_WRITE;
       }
     }
-
-    /* get these in backup variables to be able to restore them on each lap in
-       the select() loop */
-    k->rkeepfd = k->readfd;
-    k->wkeepfd = k->writefd;
-
   }
 
   return CURLE_OK;
@@ -1491,7 +1480,6 @@ void Curl_single_fdset(struct connectdata *conn,
   if(conn->keep.keepon & KEEP_READ) {
     FD_SET(conn->sockfd, read_fd_set);
     *max_fd = conn->sockfd;
-    conn->keep.readfdp = read_fd_set; /* store the address of the set */
   }
   if(conn->keep.keepon & KEEP_WRITE) {
     FD_SET(conn->writesockfd, write_fd_set);
@@ -1500,7 +1488,6 @@ void Curl_single_fdset(struct connectdata *conn,
        to compare it nicely */
     if((int)conn->writesockfd > *max_fd)
       *max_fd = conn->writesockfd;
-    conn->keep.writefdp = write_fd_set; /* store the address of the set */
   }
   /* we don't use exceptions, only touch that one to prevent compiler
      warnings! */
@@ -1543,9 +1530,6 @@ Transfer(struct connectdata *conn)
   if(!conn->bits.getheader && conn->bits.no_body)
     return CURLE_OK;
 
-  k->writefdp = &k->writefd; /* store the address of the set */
-  k->readfdp = &k->readfd;   /* store the address of the set */
-
   while (!done) {
     int fd_read;
     int fd_write;
@@ -1742,9 +1726,11 @@ static void strcpy_url(char *output, char *url)
  * as given by the remote server and set up the new URL to request.
  */
 CURLcode Curl_follow(struct SessionHandle *data,
-                     char *newurl) /* this 'newurl' is the Location: string,
+                     char *newurl, /* this 'newurl' is the Location: string,
                                       and it must be malloc()ed before passed
                                       here */
+                     bool retry) /* set TRUE if this is a request retry as
+                                    opposed to a real redirect following */
 {
   /* Location: redirect */
   char prot[16]; /* URL protocol string storage */
@@ -1758,8 +1744,9 @@ CURLcode Curl_follow(struct SessionHandle *data,
     return CURLE_TOO_MANY_REDIRECTS;
   }
 
-  /* mark the next request as a followed location: */
+  if(!retry)
-  data->state.this_is_a_follow = TRUE;
+    /* mark the next request as a followed location: */
+    data->state.this_is_a_follow = TRUE;
 
   data->set.followlocation++; /* count location-followers */
 
@@ -2051,6 +2038,8 @@ Curl_connect_host(struct SessionHandle *data,
       if(CURLE_OK == res)
         /* Resolved, continue with the connection */
         res = Curl_async_resolved(*conn);
+      else
+        (void)Curl_disconnect(*conn);
     }
     if(res)
       break;
@@ -2063,7 +2052,7 @@ Curl_connect_host(struct SessionHandle *data,
       res = Curl_done(conn, res);
       if(CURLE_OK == res) {
         char *gotourl = strdup(data->change.url);
-        res = Curl_follow(data, gotourl);
+        res = Curl_follow(data, gotourl, FALSE);
         if(res)
           free(gotourl);
       }
@@ -2073,7 +2062,32 @@ Curl_connect_host(struct SessionHandle *data,
   return res;
 }
 
+/* Returns TRUE and sets '*url' if a request retry is wanted */
+bool Curl_retry_request(struct connectdata *conn,
+                        char **url)
+{
+  bool retry = FALSE;
 
+  if((conn->keep.bytecount+conn->headerbytecount == 0) &&
+     conn->bits.reuse) {
+    /* We got no data and we attempted to re-use a connection. This might
+       happen if the connection was left alive when we were done using it
+       before, but that was closed when we wanted to read from it again. Bad
+       luck. Retry the same request on a fresh connect! */
+    infof(conn->data, "Connection died, retrying a fresh connect\n");
+    *url = strdup(conn->data->change.url);
+
+    conn->bits.close = TRUE; /* close this connection */
+    conn->bits.retry = TRUE; /* mark this as a connection we're about
+                                to retry. Marking it this way should
+                                prevent i.e HTTP transfers to return
+                                error just because nothing has been
+                                transfered! */
+    retry = TRUE;
+  }
+
+  return retry;
+}
 
 /*
  * Curl_perform() is the internal high-level function that gets called by the
@@ -2086,6 +2100,7 @@ CURLcode Curl_perform(struct SessionHandle *data)
   CURLcode res2;
   struct connectdata *conn=NULL;
   char *newurl = NULL; /* possibly a new URL to follow to! */
+  bool retry = FALSE;
 
   data->state.used_interface = Curl_if_easy;
 
@@ -2104,7 +2119,7 @@ CURLcode Curl_perform(struct SessionHandle *data)
     res = Curl_connect_host(data, &conn);   /* primary connection */
 
     if(res == CURLE_OK) {
-      if (data->set.source_host) /* 3rd party transfer */
+      if (data->set.source_url) /* 3rd party transfer */
         res = Curl_pretransfersec(conn);
       else
         conn->sec_conn = NULL;
@@ -2115,31 +2130,15 @@ CURLcode Curl_perform(struct SessionHandle *data)
       res = Curl_do(&conn);
 
       /* for non 3rd party transfer only */
-      if(res == CURLE_OK && !data->set.source_host) {
+      if(res == CURLE_OK && !data->set.source_url) {
         res = Transfer(conn); /* now fetch that URL please */
         if(res == CURLE_OK) {
+          retry = Curl_retry_request(conn, &newurl);
 
-          if((conn->keep.bytecount+conn->headerbytecount == 0) &&
+          if(!retry)
-             conn->bits.reuse) {
-            /* We got no data and we attempted to re-use a connection. This
-               might happen if the connection was left alive when we were done
-               using it before, but that was closed when we wanted to read
-               from it again. Bad luck. Retry the same request on a fresh
-               connect! */
-            infof(data, "Connection died, retrying a fresh connect\n");
-            newurl = strdup(conn->data->change.url);
-
-            conn->bits.close = TRUE; /* close this connection */
-            conn->bits.retry = TRUE; /* mark this as a connection we're about
-                                        to retry. Marking it this way should
-                                        prevent i.e HTTP transfers to return
-                                        error just because nothing has been
-                                        transfered! */
-          }
-          else
             /*
-             * We must duplicate the new URL here as the connection data
+             * We must duplicate the new URL here as the connection data may
-             * may be free()ed in the Curl_done() function.
+             * be free()ed in the Curl_done() function.
              */
             newurl = conn->newurl?strdup(conn->newurl):NULL;
         }
@@ -2174,7 +2173,7 @@ CURLcode Curl_perform(struct SessionHandle *data)
        */
 
       if((res == CURLE_OK) && newurl) {
-        res = Curl_follow(data, newurl);
+        res = Curl_follow(data, newurl, retry);
         if(CURLE_OK == res) {
           newurl = NULL;
           continue;
@@ -2243,28 +2242,26 @@ CURLcode Curl_pretransfersec(struct connectdata *conn)
   CURLcode status = CURLE_OK;
   struct SessionHandle *data = conn->data;
   struct connectdata *sec_conn = NULL;   /* secondary connection */
-  bool reuse_fresh_tmp = data->set.reuse_fresh;
+  bool backup_reuse_fresh = data->set.reuse_fresh;
-
+  char *backup_userpwd = data->set.userpwd;
-  /* update data with source host options */
-  char *url = aprintf( "%s://%s/", conn->protostr, data->set.source_host);
-
-  if(!url)
-    return CURLE_OUT_OF_MEMORY;
 
   if(data->change.url_alloc)
     free(data->change.url);
 
-  data->change.url_alloc = TRUE;
+  data->change.url_alloc = FALSE;
-  data->change.url = url;
+  data->change.url = data->set.source_url;
-  data->set.ftpport = data->set.source_port;
-  data->set.userpwd = data->set.source_userpwd;
 
+  /* We must never actually alter 'data->set' properties, so we restore the
+     backed up values afterwards! */
+
+#if 0
   /* if both remote hosts are the same host - create new connection */
   if (strequal(conn->host.dispname, data->set.source_host))
-    /* NOTE: this is restored back to the original value after the connect is
+#endif
-       done */
     data->set.reuse_fresh = TRUE;
 
+  data->set.userpwd = data->set.source_userpwd;
+
   /* secondary connection */
   status = Curl_connect_host(data, &sec_conn);
   if(CURLE_OK == status) {
@@ -2274,7 +2271,8 @@ CURLcode Curl_pretransfersec(struct connectdata *conn)
     conn->sec_conn = sec_conn;
   }
 
-  data->set.reuse_fresh = reuse_fresh_tmp;
+  data->set.reuse_fresh = backup_reuse_fresh;
+  data->set.userpwd = backup_userpwd;
 
   return status;
 }

lib/transfer.h

@@ -26,7 +26,7 @@ CURLcode Curl_perform(struct SessionHandle *data);
 CURLcode Curl_pretransfer(struct SessionHandle *data);
 CURLcode Curl_pretransfersec(struct connectdata *conn);
 CURLcode Curl_posttransfer(struct SessionHandle *data);
-CURLcode Curl_follow(struct SessionHandle *data, char *newurl);
+CURLcode Curl_follow(struct SessionHandle *data, char *newurl, bool retry);
 CURLcode Curl_readwrite(struct connectdata *conn, bool *done);
 void Curl_single_fdset(struct connectdata *conn,
                        fd_set *read_fd_set,
@@ -36,7 +36,7 @@ void Curl_single_fdset(struct connectdata *conn,
 CURLcode Curl_readwrite_init(struct connectdata *conn);
 CURLcode Curl_readrewind(struct connectdata *conn);
 CURLcode Curl_fillreadbuffer(struct connectdata *conn, int bytes, int *nreadp);
-
+bool Curl_retry_request(struct connectdata *conn, char **url);
 /* This sets up a forthcoming transfer */
 CURLcode
 Curl_Transfer (struct connectdata *data,

lib/url.c

@@ -118,6 +118,7 @@ void idn_free (void *ptr); /* prototype from idn-free.h, not provided by
 #include "http_digest.h"
 #include "http_negotiate.h"
 #include "select.h"
+#include "multiif.h"
 
 /* And now for the protocols */
 #include "ftp.h"
@@ -196,6 +197,10 @@ void Curl_safefree(void *ptr)
 
 CURLcode Curl_close(struct SessionHandle *data)
 {
+  if(data->multi) {
+    /* this handle is still part of a multi handle, take care of this first */
+    Curl_multi_rmeasy(data->multi, data);
+  }
   /* Loop through all open connections and kill them one by one */
   while(-1 != ConnectionKillOne(data))
     ; /* empty loop */
@@ -774,7 +779,7 @@ CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...)
      */
     data->set.cookiesession = (bool)va_arg(param, long);
     break;
-#endif
+#endif /* CURL_DISABLE_COOKIES */
 
   case CURLOPT_HTTPGET:
     /*
@@ -813,27 +818,6 @@ CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...)
        and this just changes the actual request keyword */
     break;
 
-  case CURLOPT_PROXY:
-    /*
-     * Set proxy server:port to use as HTTP proxy.
-     *
-     * If the proxy is set to "" we explicitly say that we don't want to use a
-     * proxy (even though there might be environment variables saying so).
-     *
-     * Setting it to NULL, means no proxy but allows the environment variables
-     * to decide for us.
-     */
-    if(data->change.proxy_alloc) {
-      /*
-       * The already set string is allocated, free that first
-       */
-      data->change.proxy_alloc=FALSE;;
-      free(data->change.proxy);
-    }
-    data->set.set_proxy = va_arg(param, char *);
-    data->change.proxy = data->set.set_proxy;
-    break;
-
   case CURLOPT_PROXYPORT:
     /*
      * Explicitly set HTTP proxy port number.
@@ -882,6 +866,27 @@ CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...)
   break;
 #endif   /* CURL_DISABLE_HTTP */
 
+  case CURLOPT_PROXY:
+    /*
+     * Set proxy server:port to use as HTTP proxy.
+     *
+     * If the proxy is set to "" we explicitly say that we don't want to use a
+     * proxy (even though there might be environment variables saying so).
+     *
+     * Setting it to NULL, means no proxy but allows the environment variables
+     * to decide for us.
+     */
+    if(data->change.proxy_alloc) {
+      /*
+       * The already set string is allocated, free that first
+       */
+      data->change.proxy_alloc=FALSE;;
+      free(data->change.proxy);
+    }
+    data->set.set_proxy = va_arg(param, char *);
+    data->change.proxy = data->set.set_proxy;
+    break;
+
   case CURLOPT_WRITEHEADER:
     /*
      * Custom pointer to pass the header write callback function
@@ -1355,19 +1360,12 @@ CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...)
     break;
 
   /*********** 3rd party transfer options ***********/
-  case CURLOPT_SOURCE_HOST:
+  case CURLOPT_SOURCE_URL:
     /*
-     * Use SOURCE HOST
+     * SOURCE URL
      */
-    data->set.source_host = va_arg(param, char *);
+    data->set.source_url = va_arg(param, char *);
-    data->set.printhost = (data->set.source_host != NULL);
+    data->set.printhost = (data->set.source_url != NULL);
-    break;
-
-  case CURLOPT_SOURCE_PORT:
-    /*
-     * Use SOURCE PORT
-     */
-    data->set.source_port = va_arg(param, char *);
     break;
 
   case CURLOPT_SOURCE_USERPWD:
@@ -1377,18 +1375,11 @@ CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...)
     data->set.source_userpwd = va_arg(param, char *);
     break;
 
-  case CURLOPT_SOURCE_PATH:
+  case CURLOPT_SOURCE_QUOTE:
     /*
-     * Use SOURCE PATH
+     * List of RAW FTP commands to use after a connect
      */
-    data->set.source_path = va_arg(param, char *);
+    data->set.source_quote = va_arg(param, struct curl_slist *);
-    break;
-
-  case CURLOPT_PASV_HOST:
-    /*
-     * Indicates whether source or target host is passive
-     */
-    data->set.pasvHost = va_arg(param, long)?CURL_SOURCE_PASV:CURL_TARGET_PASV;
     break;
 
   case CURLOPT_SOURCE_PREQUOTE:
@@ -1405,6 +1396,10 @@ CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...)
     data->set.source_postquote = va_arg(param, struct curl_slist *);
     break;
 
+  case CURLOPT_FTP_ACCOUNT:
+    data->set.ftp_account = va_arg(param, char *);
+    break;
+
   default:
     /* unknown tag and its companion, just ignore: */
     result = CURLE_FAILED_INIT; /* correct this */
@@ -1422,9 +1417,6 @@ CURLcode Curl_disconnect(struct connectdata *conn)
 
   data = conn->data;
 
-  if(conn->dns_entry)
-    Curl_resolv_unlock(data, conn->dns_entry); /* done with this */
-
 #if defined(CURLDEBUG) && defined(AGGRESIVE_TEST)
   /* scan for DNS cache entries still marked as in use */
   Curl_hash_apply(data->hostcache,
@@ -1505,6 +1497,7 @@ CURLcode Curl_disconnect(struct connectdata *conn)
   Curl_safefree(conn->allocptr.ref);
   Curl_safefree(conn->allocptr.host);
   Curl_safefree(conn->allocptr.cookiehost);
+  Curl_safefree(conn->ip_addr_str);
 
 #if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \
     defined(USE_THREADING_GETADDRINFO)
@@ -1821,8 +1814,8 @@ static int handleSock5Proxy(const char *proxy_name,
       return 1;
     }
 
-    if ((socksreq[0] != 5) || /* version */
+    /* ignore the first (VER) byte */
-        (socksreq[1] != 0)) { /* status */
+    if (socksreq[1] != 0) { /* status */
       failf(conn->data, "User was rejected by the SOCKS5 server (%d %d).",
             socksreq[0], socksreq[1]);
       return 1;
@@ -1966,6 +1959,8 @@ static CURLcode ConnectPlease(struct connectdata *conn,
     conn->dns_entry = hostaddr;
     conn->ip_addr = addr;
 
+    Curl_store_ip_addr(conn);
+
     if (conn->data->set.proxytype == CURLPROXY_SOCKS5) {
       return handleSock5Proxy(conn->proxyuser,
                               conn->proxypasswd,
@@ -1989,14 +1984,9 @@ static CURLcode ConnectPlease(struct connectdata *conn,
  */
 static void verboseconnect(struct connectdata *conn)
 {
-  struct SessionHandle *data = conn->data;
+  infof(conn->data, "Connected to %s (%s) port %d\n",
-  char addrbuf[256];
-
-  /* Get a printable version of the network address. */
-  Curl_printable_address(conn->ip_addr, addrbuf, sizeof(addrbuf));
-  infof(data, "Connected to %s (%s) port %d\n",
         conn->bits.httpproxy ? conn->proxy.dispname : conn->host.dispname,
-        addrbuf[0] ? addrbuf : "??", conn->port);
+        conn->ip_addr_str, conn->port);
 }
 
 /*
@@ -2192,7 +2182,7 @@ static CURLcode CreateConnection(struct SessionHandle *data,
      to not have to modify everything at once, we allocate a temporary
      connection data struct and fill in for comparison purposes. */
 
-  conn = (struct connectdata *)malloc(sizeof(struct connectdata));
+  conn = (struct connectdata *)calloc(sizeof(struct connectdata), 1);
   if(!conn) {
     *in_connect = NULL; /* clear the pointer */
     return CURLE_OUT_OF_MEMORY;
@@ -2202,9 +2192,6 @@ static CURLcode CreateConnection(struct SessionHandle *data,
      any failure */
   *in_connect = conn;
 
-  /* we have to init the struct */
-  memset(conn, 0, sizeof(struct connectdata));
-
   /* and we setup a few fields in case we end up actually using this struct */
   conn->data = data;           /* remember our daddy */
   conn->sock[FIRSTSOCKET] = CURL_SOCKET_BAD;     /* no file descriptor */
@@ -2259,6 +2246,7 @@ static CURLcode CreateConnection(struct SessionHandle *data,
   if(NULL == conn->host.rawalloc)
     return CURLE_OUT_OF_MEMORY;
   conn->host.name = conn->host.rawalloc;
+  conn->host.name[0] = 0;
 
   /*************************************************************
    * Parse the URL.
@@ -2348,21 +2336,19 @@ static CURLcode CreateConnection(struct SessionHandle *data,
       /* Note: if you add a new protocol, please update the list in
        * lib/version.c too! */
 
-      if(checkprefix("GOPHER", conn->host.name))
+      if(checkprefix("GOPHER.", conn->host.name))
         strcpy(conn->protostr, "gopher");
 #ifdef USE_SSLEAY
-      else if(checkprefix("HTTPS", conn->host.name))
-        strcpy(conn->protostr, "https");
       else if(checkprefix("FTPS", conn->host.name))
         strcpy(conn->protostr, "ftps");
 #endif /* USE_SSLEAY */
-      else if(checkprefix("FTP", conn->host.name))
+      else if(checkprefix("FTP.", conn->host.name))
         strcpy(conn->protostr, "ftp");
-      else if(checkprefix("TELNET", conn->host.name))
+      else if(checkprefix("TELNET.", conn->host.name))
         strcpy(conn->protostr, "telnet");
-      else if (checkprefix("DICT", conn->host.name))
+      else if (checkprefix("DICT.", conn->host.name))
         strcpy(conn->protostr, "DICT");
-      else if (checkprefix("LDAP", conn->host.name))
+      else if (checkprefix("LDAP.", conn->host.name))
         strcpy(conn->protostr, "LDAP");
       else {
         strcpy(conn->protostr, "http");
@@ -2433,6 +2419,7 @@ static CURLcode CreateConnection(struct SessionHandle *data,
       return CURLE_OUT_OF_MEMORY;
   }
 
+#ifndef CURL_DISABLE_HTTP
   /*************************************************************
    * Detect what (if any) proxy to use
    *************************************************************/
@@ -2597,6 +2584,7 @@ static CURLcode CreateConnection(struct SessionHandle *data,
     if(no_proxy)
       free(no_proxy);
   } /* if not using proxy */
+#endif /* CURL_DISABLE_HTTP */
 
   /*************************************************************
    * No protocol part in URL was used, add it!
@@ -3535,12 +3523,16 @@ CURLcode Curl_done(struct connectdata **connp,
   struct SessionHandle *data=conn->data;
 
   /* cleanups done even if the connection is re-used */
-
   if(conn->bits.rangestringalloc) {
     free(conn->range);
     conn->bits.rangestringalloc = FALSE;
   }
 
+  if(conn->dns_entry) {
+    Curl_resolv_unlock(data, conn->dns_entry); /* done with this */
+    conn->dns_entry = NULL;
+  }
+
   /* Cleanup possible redirect junk */
   if(conn->newurl) {
     free(conn->newurl);

lib/urldata.h

@@ -7,7 +7,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -188,12 +188,6 @@ typedef enum {
   NTLMSTATE_LAST
 } curlntlm;
 
-/* for 3rd party transfers to decide which side that issues PASV */
-typedef enum {
-  CURL_TARGET_PASV,
-  CURL_SOURCE_PASV
-} curl_pasv_side;
-
 /* Struct used for NTLM challenge-response authentication */
 struct ntlmdata {
   curlntlm state;
@@ -299,8 +293,9 @@ struct ConnectBits {
   bool httpproxy;    /* if set, this transfer is done through a http proxy */
   bool user_passwd;    /* do we use user+password for this connection? */
   bool proxy_user_passwd; /* user+password for the proxy? */
-  bool ipv6_ip; /* we communicate with a remove site specified with pure IPv6
+  bool ipv6_ip; /* we communicate with a remote site specified with pure IPv6
                    IP address */
+  bool ipv6;    /* we communicate with a site using an IPv6 address */
   bool use_range;
   bool rangestringalloc; /* the range string is malloc()'ed */
 
@@ -410,15 +405,6 @@ struct Curl_transfer_keeper {
   char *uploadbuf;
   curl_socket_t maxfd;
 
-  /* pointers to the actual descriptors we check */
-  fd_set *readfdp;
-  fd_set *writefdp;
-
-  /* the file descriptors to play with */
-  fd_set readfd;
-  fd_set writefd;
-  fd_set rkeepfd;
-  fd_set wkeepfd;
   int keepon;
 
   bool upload_done; /* set to TRUE when doing chunked transfer-encoding upload
@@ -465,9 +451,21 @@ struct connectdata {
 #define PROT_FTPS    (1<<9)
 #define PROT_SSL     (1<<10) /* protocol requires SSL */
 
-  /* the particular host we use, in two different ways */
+  /* 'dns_entry' is the particular host we use. This points to an entry in the
+     DNS cache and it will not get pruned while locked. It gets unlocked in
+     Curl_done() */
   struct Curl_dns_entry *dns_entry;
-  Curl_addrinfo *ip_addr; /* the particular IP we connected to */
+
+  /* 'ip_addr' is the particular IP we connected to. It points to a struct
+     within the DNS cache, so this pointer is only valid as long as the DNS
+     cache entry remains locked. It gets unlocked in Curl_done() */
+  Curl_addrinfo *ip_addr;
+
+  /* 'ip_addr_str' is the ip_addr data as a human readable malloc()ed string.
+     It remains available as long as the connection does, which is longer than
+     the ip_addr itself. Set with Curl_store_ip_addr() when ip_addr has been
+     set. */
+  char *ip_addr_str;
 
   char protostr[16];  /* store the protocol string in this buffer */
 
@@ -623,6 +621,8 @@ struct connectdata {
 #endif
   struct connectdata *sec_conn;   /* secondary connection for 3rd party
                                      transfer */
+
+  enum { NORMAL, SOURCE3RD, TARGET3RD } xfertype;
 };
 
 /* The end of connectdata. */
@@ -875,9 +875,11 @@ struct UserDefined {
   char *cookiejar;      /* dump all cookies to this file */
   bool cookiesession;   /* new cookie session? */
   bool crlf;            /* convert crlf on ftp upload(?) */
+  char *ftp_account;    /* ftp account data */
   struct curl_slist *quote;     /* after connection is established */
   struct curl_slist *postquote; /* after the transfer */
   struct curl_slist *prequote; /* before the transfer, after type */
+  struct curl_slist *source_quote;  /* 3rd party quote */
   struct curl_slist *source_prequote;  /* in 3rd party transfer mode - before
                                           the transfer on source host */
   struct curl_slist *source_postquote; /* in 3rd party transfer mode - after
@@ -910,11 +912,8 @@ struct UserDefined {
 
   curl_off_t max_filesize; /* Maximum file size to download */
 
-  char *source_host;     /* for 3rd party transfer */
+  char *source_url;     /* for 3rd party transfer */
-  char *source_port;     /* for 3rd party transfer */
   char *source_userpwd;  /* for 3rd party transfer */
-  char *source_path;     /* for 3rd party transfer */
-  curl_pasv_side pasvHost; /* for 3rd party transfer indicates passive host */
 
 /* Here follows boolean settings that define how to behave during
    this session. They are STATIC, set by libcurl users or at least initially
@@ -970,7 +969,9 @@ struct UserDefined {
  * 'struct urlstate' instead.  */
 
 struct SessionHandle {
-  curl_hash *hostcache;
+  struct curl_hash *hostcache;
+  void *multi;                 /* if non-NULL, points to the multi handle
+                                  struct of which this "belongs" */
   struct Curl_share *share;    /* Share, handles global variable mutexing */
   struct UserDefined set;      /* values set by the libcurl user */
   struct DynamicStatic change; /* possibly modified userdefined data */

lib/version.c

@@ -146,7 +146,7 @@ char *curl_version(void)
 
 /* data for curl_version_info */
 
-static const char *protocols[] = {
+static const char * const protocols[] = {
 #ifndef CURL_DISABLE_FTP
   "ftp",
 #endif

packages/vms/hpssl_alpha.opt

@@ -1,2 +1,2 @@
-SYS$LIBRARY:SSL$LIBCRYPTO_SHR.EXE/SHARE
+SYS$LIBRARY:SSL$LIBCRYPTO_SHR32.EXE/SHARE
-SYS$LIBRARY:SSL$LIBSSL_SHR.EXE/SHARE
+SYS$LIBRARY:SSL$LIBSSL_SHR32.EXE/SHARE

src/Makefile.Watcom

@@ -0,0 +1,107 @@
+#
+#  Watcom / OpenWatcom / Win32 makefile for cURL.
+#  G. Vanem <giva@bgnett.no>
+#
+# $Id$
+
+#
+# Set to 1 to use static lib.
+# Set to 0 to use DLL and import lib.
+#
+STATIC = 1
+
+CC = wcc386
+
+CFLAGS = -3r -mf -d3 -hc -zff -zgf -zq -zm -s -fr=con -w2 -fpi -oilrtfm     &
+         -bt=nt -d+ -dWIN32 -dHAVE_LONGLONG -dHAVE_STRTOLL -dWITHOUT_MM_LIB &
+         -dSIZEOF_CURL_OFF_T=8 -dCURLDEBUG -dENABLE_IPV6 -dHAVE_WINSOCK2_H  &
+         -I..\include -I..\lib
+
+!ifeq STATIC 0
+LIBCURL = ..\lib\libcurl_wc_imp.lib
+
+!else
+CFLAGS += -dCURL_STATICLIB
+LIBCURL = ..\lib\libcurl_wc.lib
+!endif
+
+OBJ_DIR = Watcom_obj
+
+OBJS = $(OBJ_DIR)\getpass.obj  $(OBJ_DIR)\homedir.obj $(OBJ_DIR)\hugehelp.obj &
+       $(OBJ_DIR)\main.obj     $(OBJ_DIR)\urlglob.obj $(OBJ_DIR)\writeenv.obj &
+       $(OBJ_DIR)\writeout.obj $(OBJ_DIR)\timeval.obj
+
+RESOURCE = $(OBJ_DIR)\curl.res
+
+all: hugehelp.c $(OBJ_DIR) curl.exe .SYMBOLIC
+	@echo Welcome to cURL
+
+hugehelp.c: hugehelp.c.cvs
+	copy hugehelp.c.cvs hugehelp.c
+
+$(OBJ_DIR):
+	mkdir $(OBJ_DIR)
+
+curl.exe: $(OBJS) $(RESOURCE)
+	wlink name $@ system nt file { $(OBJS) }                   &
+	  option quiet, map, caseexact, eliminate, res=$(RESOURCE) &
+	  libpath $(%watcom)\lib386;$(%watcom)\lib386\nt           &
+	  library $(LIBCURL), clib3r.lib, ws2_32.lib
+
+clean: .SYMBOLIC
+	- rm -f $(OBJS) $(RESOURCE)
+
+vclean realclean: clean .SYMBOLIC
+ 	- rm -f curl.exe curl.map
+	- rmdir $(OBJ_DIR)
+
+$(RESOURCE): curl.rc
+	wrc -dCURLDEBUG=1 -q -r -zm -I..\include -fo=$@ curl.rc
+
+.ERASE
+$(OBJ_DIR)\timeval.obj: ..\lib\timeval.c
+	$(CC) $[@ $(CFLAGS) -fo=$@
+	@echo .
+
+.ERASE
+.c{$(OBJ_DIR)}.obj:
+	$(CC) $[@ $(CFLAGS) -fo=$@
+	@echo .
+
+#
+# Dependencies based on "gcc -MM .."
+#
+$(OBJ_DIR)/getpass.obj: getpass.c setup.h config-win32.h ..\lib\setup.h &
+  ..\lib\config-win32.h getpass.h ..\lib\memdebug.h ..\lib\setup.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)/homedir.obj: homedir.c setup.h config-win32.h ..\lib\setup.h &
+  ..\lib\config-win32.h homedir.h ..\lib\memdebug.h ..\lib\setup.h &
+  ..\include\curl\curl.h ..\include\curl\curlver.h ..\include\curl\easy.h &
+  ..\include\curl\multi.h ..\include\curl\curl.h
+
+$(OBJ_DIR)/hugehelp.obj: hugehelp.c setup.h config-win32.h ..\lib\setup.h &
+  ..\lib\config-win32.h hugehelp.h ../../../zlib-1.2.1/zlib.h &
+  ../../../zlib-1.2.1/zconf.h
+
+$(OBJ_DIR)/main.obj: main.c setup.h config-win32.h ..\lib\setup.h &
+  ..\lib\config-win32.h ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  urlglob.h writeout.h getpass.h homedir.h hugehelp.h version.h &
+  ..\include\curl\curlver.h ..\lib\curlx.h ..\include\curl\mprintf.h &
+  ..\lib\strequal.h ..\lib\strtoofft.h ..\lib\setup.h ..\lib\timeval.h &
+  ..\lib\memdebug.h
+
+$(OBJ_DIR)/urlglob.obj: urlglob.c setup.h config-win32.h ..\lib\setup.h &
+  ..\lib\config-win32.h ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  ..\include\curl\mprintf.h urlglob.h ..\lib\memdebug.h ..\lib\setup.h
+
+$(OBJ_DIR)/writeenv.obj: writeenv.c setup.h config-win32.h ..\lib\setup.h &
+  ..\lib\config-win32.h
+
+$(OBJ_DIR)/writeout.obj: writeout.c setup.h config-win32.h ..\lib\setup.h &
+  ..\lib\config-win32.h ..\include\curl\curl.h ..\include\curl\curlver.h &
+  ..\include\curl\easy.h ..\include\curl\multi.h ..\include\curl\curl.h &
+  ..\include\curl\mprintf.h writeout.h

src/Makefile.am

@@ -43,7 +43,7 @@ EXTRA_DIST = mkhelp.pl makefile.dj Makefile.vc6 Makefile.b32 Makefile.m32 \
 	Makefile.riscos config.h.in macos/curl.mcp.xml.sit.hqx		  \
 	macos/MACINSTALL.TXT macos/src/curl_GUSIConfig.cpp		  \
 	macos/src/macos_main.cpp config-amigaos.h makefile.amiga curl.rc  \
-	Makefile.netware Makefile.inc
+	Makefile.netware Makefile.inc Makefile.Watcom
 
 MANPAGE=$(top_srcdir)/docs/curl.1
 README=$(top_srcdir)/docs/MANUAL

src/Makefile.vc6

@@ -20,27 +20,29 @@ ZLIB_PATH = ../../zlib-1.2.1
 !ENDIF
 
 !IFNDEF OPENSSL_PATH
-OPENSSL_PATH = ../../openssl-0.9.7d
+OPENSSL_PATH = ../../openssl-0.9.7e
 !ENDIF
 
 ########################################################
 ## Nothing more to do below this line!
-CFLAGSZLIB = /DHAVE_ZLIB_H /DHAVE_ZLIB /DHAVE_LIBZ /I "$(ZLIB_PATH)"
+ZLIB_CFLAGS   = /DHAVE_ZLIB_H /DHAVE_ZLIB /DHAVE_LIBZ /I "$(ZLIB_PATH)"
-LFLAGSZLIB = "/LIBPATH:$(ZLIB_PATH)"
+ZLIB_LFLAGS   = "/LIBPATH:$(ZLIB_PATH)"
-ZLIBLIBS   = zlib.lib
+ZLIB_LIBS     = zlib.lib
-SSLINC     = /I "$(OPENSSL_PATH)/inc32" /I "$(OPENSSL_PATH)/inc32/openssl"
+ZLIB_IMP_LIBS = zdll.lib
-CFLAGSSSL  = /DUSE_SSLEAY
+
-LFLAGSSSL  = /LIBPATH:"$(OPENSSL_PATH)/out32"
+SSL_CFLAGS     = /DUSE_SSLEAY
-SSLLIBS    = libeay32.lib ssleay32.lib gdi32.lib
+SSL_LFLAGS     = /LIBPATH:"$(OPENSSL_PATH)/out32"
+SSL_IMP_LFLAGS = /LIBPATH:"$(OPENSSL_PATH)/out32dll"
+SSL_LIBS       = libeay32.lib ssleay32.lib gdi32.lib
 
 ## Release
 CCR   = cl.exe /MD /O2 /DNDEBUG
-LINKR = link.exe /incremental:no /libpath:../lib
+LINKR = link.exe /incremental:no /libpath:"../lib"
 RCR   = rc.exe /dCURLDEBUG=0
 
 ## Debug
 CCD   = cl.exe /MDd /Gm /ZI /Od /D_DEBUG /GZ
-LINKD = link.exe /incremental:yes /debug /libpath:../lib
+LINKD = link.exe /incremental:yes /debug /libpath:"../lib"
 RCD   = rc.exe /dCURLDEBUG=1
 
 CFLAGS   = /I../lib /I../include /nologo /W3 /GX /DWIN32 /YX /FD /c
@@ -70,53 +72,109 @@ DEBUG_OBJS= \
 	maind.obj \
 	curld.res
 
-#################################################
-# release-zlib (static libcurl + zlib)
-
-!IF "$(CFG)" == "release-zlib"
-CFLAGS         = $(CFLAGS) $(CFLAGSZLIB) /DCURL_STATICLIB
-LINKLIBS       = libcurl.lib  $(ZLIBLIBS)
-LINKLIBS_DEBUG = libcurld.lib $(ZLIBLIBS)
-LFLAGS         = $(LFLAGS) $(LFLAGSZLIB)
-!ENDIF
-
-#################################################
-# release-ssl (static libcurl + ssl)
-
-!IF "$(CFG)" == "release-ssl"
-CFLAGS         = $(CFLAGS) $(CFLAGSSSL) /DCURL_STATICLIB
-LINKLIBS       = libcurl.lib  $(SSLLIBS)
-LINKLIBS_DEBUG = libcurld.lib $(SSLLIBS)
-LFLAGS         = $(LFLAGS) $(LFLAGSSSL)
-!ENDIF
-
-#################################################
-# release-libcurl-ssl-dll (libcurl.dll + ssl)
-
-!IF "$(CFG)" == "release-libcurl-ssl-dll"
-CFLAGS         = $(CFLAGS) $(CFLAGSSSL)
-LINKLIBS       = libcurl_imp.lib  $(SSLLIBS)
-LINKLIBS_DEBUG = libcurld_imp.lib $(SSLLIBS)
-LFLAGS         = $(LFLAGS) $(LFLAGSSSL)
-!ENDIF
-
-#################################################
-# release-ssl-zlib (static libcurl +  ssl + zlib)
-
-!IF "$(CFG)" == "release-ssl-zlib"
-CFLAGS         = $(CFLAGS) $(CFLAGSSSL) $(CFLAGSZLIB) /DCURL_STATICLIB
-LINKLIBS       = libcurl.lib  $(SSLLIBS) $(ZLIBLIBS)
-LINKLIBS_DEBUG = libcurld.lib $(SSLLIBS) $(ZLIBLIBS)
-LFLAGS         = $(LFLAGS) $(LFLAGSSSL) $(LFLAGSZLIB)
-!ENDIF
-
 #################################################
 # If CFG not specified, use static libs
 
-!IF "$(CFG)." == "."
 CFLAGS         = $(CFLAGS) /DCURL_STATICLIB
 LINKLIBS       = libcurl.lib
 LINKLIBS_DEBUG = libcurld.lib
+
+#################################################
+# release dynamic library
+
+!IF "$(CFG)" == "release-dll"
+LINKLIBS       = libcurl_imp.lib
+LINKLIBS_DEBUG = libcurld_imp.lib
+!ENDIF
+
+#################################################
+# release static library with zlib
+
+!IF "$(CFG)" == "release-zlib"
+CFLAGS         = $(CFLAGS) $(ZLIB_CFLAGS) /DCURL_STATICLIB
+LINKLIBS       = libcurl.lib  $(ZLIB_LIBS)
+LINKLIBS_DEBUG = libcurld.lib $(ZLIB_LIBS)
+LFLAGS         = $(LFLAGS) $(ZLIB_LFLAGS)
+!ENDIF
+
+#################################################
+# release static library with ssl
+
+!IF "$(CFG)" == "release-ssl"
+CFLAGS         = $(CFLAGS) $(SSL_CFLAGS) /DCURL_STATICLIB
+LINKLIBS       = libcurl.lib  $(SSL_LIBS)
+LINKLIBS_DEBUG = libcurld.lib $(SSL_LIBS)
+LFLAGS         = $(LFLAGS) $(SSL_LFLAGS)
+!ENDIF
+
+#################################################
+# release dynamic library with dynamic ssl
+
+!IF "$(CFG)" == "release-dll-ssl-dll"
+CFLAGS         = $(CFLAGS) $(SSL_CFLAGS)
+LINKLIBS       = libcurl_imp.lib  $(SSL_LIBS)
+LINKLIBS_DEBUG = libcurld_imp.lib $(SSL_LIBS)
+LFLAGS         = $(LFLAGS) $(SSL_IMP_LFLAGS)
+!ENDIF
+
+#################################################
+# release static library with ssl and zlib
+
+!IF "$(CFG)" == "release-ssl-zlib"
+CFLAGS         = $(CFLAGS) $(SSL_CFLAGS) $(ZLIB_CFLAGS) /DCURL_STATICLIB
+LINKLIBS       = libcurl.lib  $(SSL_LIBS) $(ZLIB_LIBS)
+LINKLIBS_DEBUG = libcurld.lib $(SSL_LIBS) $(ZLIB_LIBS)
+LFLAGS         = $(LFLAGS) $(SSL_LFLAGS) $(ZLIB_LFLAGS)
+!ENDIF
+
+#################################################
+# release static library with dynamic ssl
+
+!IF "$(CFG)" == "release-ssl-dll"
+CFLAGS         = $(CFLAGS) $(SSL_CFLAGS) /DCURL_STATICLIB
+LINKLIBS       = libcurl.lib  $(SSL_LIBS)
+LINKLIBS_DEBUG = libcurld.lib $(SSL_LIBS)
+LFLAGS         = $(LFLAGS) $(SSL_IMP_LFLAGS)
+!ENDIF
+
+#################################################
+# release static library with dynamic zlib
+
+!IF "$(CFG)" == "release-zlib-dll"
+CFLAGS         = $(CFLAGS) $(ZLIB_CFLAGS) /DCURL_STATICLIB
+LINKLIBS       = libcurl.lib  $(ZLIB_IMP_LIBS)
+LINKLIBS_DEBUG = libcurld.lib $(ZLIB_IMP_LIBS)
+LFLAGS         = $(LFLAGS) $(ZLIB_LFLAGS)
+!ENDIF
+
+#################################################
+# release dynamic library with dynamic zlib
+
+!IF "$(CFG)" == "release-dll-zlib-dll"
+CFLAGS         = $(CFLAGS) $(ZLIB_CFLAGS)
+LINKLIBS       = libcurl_imp.lib  $(ZLIB_IMP_LIBS)
+LINKLIBS_DEBUG = libcurld_imp.lib $(ZLIB_IMP_LIBS)
+LFLAGS         = $(LFLAGS) $(ZLIB_LFLAGS)
+!ENDIF
+
+#################################################
+# release static library with dynamic ssl and dynamic zlib
+
+!IF "$(CFG)" == "release-ssl-dll-zlib-dll"
+CFLAGS         = $(CFLAGS) $(SSL_CFLAGS) $(ZLIB_CFLAGS) /DCURL_STATICLIB
+LINKLIBS       = libcurl.lib  $(SSL_LIBS) $(ZLIB_IMP_LIBS)
+LINKLIBS_DEBUG = libcurld.lib $(SSL_LIBS) $(ZLIB_IMP_LIBS)
+LFLAGS         = $(LFLAGS) $(SSL_IMP_LFLAGS) $(ZLIB_LFLAGS)
+!ENDIF
+
+#################################################
+# release dynamic library with dynamic ssl and dynamic zlib
+
+!IF "$(CFG)" == "release-dll-ssl-dll-zlib-dll"
+CFLAGS         = $(CFLAGS) $(SSL_CFLAGS) $(ZLIB_CFLAGS)
+LINKLIBS       = libcurl_imp.lib  $(SSL_LIBS) $(ZLIB_IMP_LIBS)
+LINKLIBS_DEBUG = libcurld_imp.lib $(SSL_LIBS) $(ZLIB_IMP_LIBS)
+LFLAGS         = $(LFLAGS) $(SSL_IMP_LFLAGS) $(ZLIB_LFLAGS)
 !ENDIF
 
 
@@ -172,15 +230,10 @@ curld.res : curl.rc
 	$(RCD) $(RESFLAGS) /Fo"$@" curl.rc
 
 clean:
-	-@erase $(RELEASE_OBJS)
+	@-erase $(PROGRAM_NAME) 2> NUL
-	-@erase $(DEBUG_OBJS)
+	@-erase $(RELEASE_OBJS) 2> NUL
-	-@erase vc60.idb
+	@-erase $(DEBUG_OBJS) 2> NUL
-	-@erase vc60.pdb
+	@-erase *.idb 2> NUL
-	-@erase vc60.pch
+	@-erase *.pdb 2> NUL
-	-@erase vc70.idb
+	@-erase *.pch 2> NUL
-	-@erase vc70.pch
+	@-erase *.ilk 2> NUL
-	-@erase curl.ilk
-	-@erase curl.pdb
-
-distrib: clean
-	-@erase $(PROGRAM_NAME)

src/config.h.in

@@ -1,117 +0,0 @@
-/* src/config.h.  Generated automatically by configure.  */
-/* Define cpu-machine-OS */
-#undef OS
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the <io.h> header file.  */
-#undef HAVE_IO_H
-
-/* Define if you have strdup() */
-#undef HAVE_STRDUP
-
-/* Define if you have utime() */
-#undef HAVE_UTIME
-
-/* Define if you have the <utime.h> header file */
-#undef HAVE_UTIME_H
-
-/* Define if you have the <sys/utime.h> header file */
-#undef HAVE_SYS_UTIME_H
-
-/* Define if you have the <sys/types.h> header file */
-#undef HAVE_SYS_TYPES_H
-
-/* Define if you have the <sys/select.h> header file */
-#undef HAVE_SYS_SELECT_H
-
-/* Define if you have the <sys/socket.h> header file */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define if you have the <sys/poll.h> header file */
-#undef HAVE_SYS_POLL_H
-
-/* Define if you have the `poll' function. */
-#undef HAVE_POLL
-
-/* Define if you have a good `poll' function that can wait on NULL. */
-#undef HAVE_POLL_FINE
-
-/* Define if you can write to argc[] strings */
-#undef HAVE_WRITABLE_ARGV
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <time.h> header file. */
-#undef HAVE_TIME_H
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to 1 if you have the `getpass_r' function. */
-#undef HAVE_GETPASS_R
-
-/* Define to 1 if you have the `tcgetattr' function. */
-#undef HAVE_TCGETATTR
-
-/* Define to 1 if you have the `tcsetattr' function. */
-#undef HAVE_TCSETATTR
-
-/* Define to 1 if you have the <termios.h> header file. */
-#undef HAVE_TERMIOS_H
-
-/* Define to 1 if you have the <termio.h> header file. */
-#undef HAVE_TERMIO_H
-
-/* Define to 1 if you have the `getpwuid' function. */
-#undef HAVE_GETPWUID
-
-/* Define to 1 if you have the `geteuid' function. */
-#undef HAVE_GETEUID
-
-/* Define to 1 if you have the <pwd.h> header file. */
-#undef HAVE_PWD_H
-
-/* Define to 1 if you have the `strtoll' function. */
-#undef HAVE_STRTOLL
-
-/* The size of a `curl_off_t', as computed by sizeof. */
-#undef SIZEOF_CURL_OFF_T
-
-/* The size of a `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
-/* If zlib is available */
-#undef HAVE_LIBZ
-
-/* Define if you have the <limits.h> header file */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if you have the <locale.h> header file. */
-#undef HAVE_LOCALE_H
-
-/* Define to 1 if you have the `setlocale' function. */
-#undef HAVE_SETLOCALE
-
-/* type to use in place of socklen_t if not defined */
-#undef socklen_t
-
-/* Define to 1 if you want the built-in manual */
-#undef USE_MANUAL
-
-/* Define to 1 if you have the `gettimeofday' function. */
-#undef HAVE_GETTIMEOFDAY
-
-/* Define to 1 if you have the `ftruncate' function. */
-#undef HAVE_FTRUNCATE
-
-/* Define to 1 if you have the `pipe' function. */
-#undef HAVE_PIPE

src/getpass.c

@@ -1,47 +1,61 @@
-/* ============================================================================
+/***************************************************************************
+ *                                  _   _ ____  _
+ *  Project                     ___| | | |  _ \| |
+ *                             / __| | | | |_) | |
+ *                            | (__| |_| |  _ <| |___
+ *                             \___|\___/|_| \_\_____|
  *
- * Redistribution and use are freely permitted provided that:
+ * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
- *   1) This header remain in tact.
+ * This software is licensed as described in the file COPYING, which
- *   2) The prototypes for getpass and getpass_r are not changed from:
+ * you should have received as part of this distribution. The terms
- *         char *getpass(const char *prompt)
+ * are also available at http://curl.haxx.se/docs/copyright.html.
- *         char *getpass_r(const char *prompt, char* buffer, int buflen)
- *   3) This source code is not used outside of this(getpass.c) file.
- *   4) Any changes to this(getpass.c) source code are made publicly available.
  *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * copies of the Software, and permit persons to whom the Software is
- * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * furnished to do so, under the terms of the COPYING file.
- * AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+ *
- * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * KIND, either express or implied.
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- * ============================================================================
  *
  * $Id$
- *
+ ***************************************************************************/
- * The spirit of this license is to allow use of this source code in any
- * project be it open or closed but still encourage the use of the open,
- * library based equivilents.
- *
- * Author(s):
- *   Angus Mackay <amackay@gus.ml.org>
- *   Daniel Stenberg <daniel@haxx.se>
- */
 
-#include "setup.h" /* setup.h is required for read() prototype */
+/* This file is a reimplementation of the previous one, due to license
+   problems. */
+
+#include "setup.h"
 
 #ifndef HAVE_GETPASS_R
+/* this file is only for systems without getpass_r() */
+
+#include <stdio.h>
+#include <string.h>
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
 
 #include "getpass.h"
 
-#ifndef WIN32
+#ifdef HAVE_FCNTL_H
-#ifdef  VMS
+#include <fcntl.h>
-#include <stdio.h>
+#endif
-#include <string.h>
+#ifdef HAVE_TERMIOS_H
+#include <termios.h>
+#else
+#ifdef HAVE_TERMIO_H
+#include <termio.h>
+#endif
+#endif
+
+/* The last #include file should be: */
+#if defined(CURLDEBUG) && defined(CURLTOOLDEBUG)
+#include "memdebug.h"
+#endif
+
+#ifdef VMS
+/* VMS implementation */
 #include descrip
 #include starlet
 #include iodef
@@ -78,139 +92,16 @@ char *getpass_r(const char *prompt, char *buffer, size_t buflen)
   }
   return buffer; /* we always return success */
 }
-#else /* VMS */
+#define DONE
-#ifdef HAVE_TERMIOS_H
-#  if !defined(HAVE_TCGETATTR) && !defined(HAVE_TCSETATTR)
-#    undef HAVE_TERMIOS_H
-#  endif
-#endif
-
-#ifndef RETSIGTYPE
-#  define RETSIGTYPE void
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#include <stdio.h>
-#include <signal.h>
-#ifdef HAVE_TERMIOS_H
-#  include <termios.h>
-#else
-#  ifdef HAVE_TERMIO_H
-#  include <termio.h>
-#  else
-#  endif
-#endif
-
-/* The last #include file should be: */
-#if defined(CURLDEBUG) && defined(CURLTOOLDEBUG)
-#include "memdebug.h"
-#endif
-
-char *getpass_r(const char *prompt, char *buffer, size_t buflen)
-{
-  FILE *infp;
-  char infp_fclose = 0;
-  FILE *outfp;
-  RETSIGTYPE (*sigint)(int);
-#ifdef SIGTSTP
-  RETSIGTYPE (*sigtstp)(int);
-#endif
-  size_t bytes_read;
-  int infd;
-  int outfd;
-#ifdef HAVE_TERMIOS_H
-  struct termios orig;
-  struct termios noecho;
-#else
-#  ifdef HAVE_TERMIO_H
-  struct termio orig;
-  struct termio noecho;
-#  else
-#  endif
-#endif
-
-  sigint = signal(SIGINT, SIG_IGN);
-#ifdef SIGTSTP
-  sigtstp = signal(SIGTSTP, SIG_IGN);
-#endif
-
-  infp=fopen("/dev/tty", "r");
-  if( NULL == infp )
-    infp = stdin;
-  else
-    infp_fclose = 1;
-
-  outfp = stderr;
-
-  infd = fileno(infp);
-  outfd = fileno(outfp);
-
-  /* dissable echo */
-#ifdef HAVE_TERMIOS_H
-  tcgetattr(outfd, &orig);
-
-  noecho = orig;
-  noecho.c_lflag &= ~ECHO;
-  tcsetattr(outfd, TCSANOW, &noecho);
-#else
-#  ifdef HAVE_TERMIO_H
-  ioctl(outfd, TCGETA, &orig);
-  noecho = orig;
-  noecho.c_lflag &= ~ECHO;
-  ioctl(outfd, TCSETA, &noecho);
-#  else
-#  endif
-#endif
-
-  fputs(prompt, outfp);
-  fflush(outfp);
-
-  bytes_read=read(infd, buffer, buflen);
-  buffer[bytes_read > 0 ? (bytes_read -1) : 0] = '\0';
-
-  /* print a new line if needed */
-#ifdef HAVE_TERMIOS_H
-  fputs("\n", outfp);
-#else
-#  ifdef HAVE_TERMIO_H
-  fputs("\n", outfp);
-#  else
-#  endif
-#endif
-
-  /*
-   * reset term charectaristics, use TCSAFLUSH incase the
-   * user types more than buflen
-   */
-#ifdef HAVE_TERMIOS_H
-  tcsetattr(outfd, TCSAFLUSH, &orig);
-#else
-#  ifdef HAVE_TERMIO_H
-  ioctl(outfd, TCSETA, &orig);
-#  else
-#  endif
-#endif
-
-  signal(SIGINT, sigint);
-#ifdef SIGTSTP
-  signal(SIGTSTP, sigtstp);
-#endif
-
-  if(infp_fclose)
-    fclose(infp);
-
-  return buffer; /* we always return success */
-}
 #endif /* VMS */
-#else /* WIN32 */
+
-#include <stdio.h>
+#ifdef WIN32
+/* Windows implementation */
 #include <conio.h>
 char *getpass_r(const char *prompt, char *buffer, size_t buflen)
 {
   size_t i;
-  printf("%s", prompt);
+  fputs(prompt, stderr);
 
   for(i=0; i<buflen; i++) {
     buffer[i] = getch();
@@ -230,15 +121,96 @@ char *getpass_r(const char *prompt, char *buffer, size_t buflen)
 
   return buffer; /* we always return success */
 }
+#define DONE
+#endif /* WIN32 */
+
+#ifndef DONE /* not previously provided */
+
+#ifdef HAVE_TERMIOS_H
+#define struct_term struct termios
+#else
+#ifdef HAVE_TERMIO_H
+#define struct_term  struct termio
+#else
+#undef struct_term
+#endif
 #endif
 
-#endif /* ifndef HAVE_GETPASS_R */
+static bool ttyecho(bool enable, int fd)
-
-#if 0
-/* for consistensy, here's the old-style function: */
-char *getpass(const char *prompt)
 {
-  static char buf[256];
+#ifdef struct_term
-  return getpass_r(prompt, buf, sizeof(buf));
+  static struct_term withecho;
-}
+  static struct_term noecho;
 #endif
+  if(!enable) {
+  /* dissable echo by extracting the current 'withecho' mode and remove the
+     ECHO bit and set back the struct */
+#ifdef HAVE_TERMIOS_H
+    tcgetattr(fd, &withecho);
+    noecho = withecho;
+    noecho.c_lflag &= ~ECHO;
+    tcsetattr(fd, TCSANOW, &noecho);
+#else /* HAVE_TERMIOS_H */
+#ifdef HAVE_TERMIO_H
+    ioctl(fd, TCGETA, &withecho);
+    noecho = withecho;
+    noecho.c_lflag &= ~ECHO;
+    ioctl(fd, TCSETA, &noecho);
+#else /* HAVE_TERMIO_H */
+/* neither HAVE_TERMIO_H nor HAVE_TERMIOS_H, we can't disable echo! */
+    (void)fd; /* prevent compiler warning on unused variable */
+    return FALSE; /* not disabled */
+#endif
+#endif
+    return TRUE; /* disabled */
+  }
+  else {
+    /* re-enable echo, assumes we disabled it before (and set the structs we
+       now use to reset the terminal status) */
+#ifdef HAVE_TERMIOS_H
+    tcsetattr(fd, TCSAFLUSH, &withecho);
+#else /* HAVE_TERMIOS_H */
+#ifdef HAVE_TERMIO_H
+    ioctl(fd, TCSETA, &withecho);
+#else
+/* neither HAVE_TERMIO_H nor HAVE_TERMIOS_H */
+    return FALSE; /* not enabled */
+#endif
+#endif
+    return TRUE; /* enabled */
+  }
+}
+
+char *getpass_r(const char *prompt, /* prompt to display */
+                char *password,     /* buffer to store password in */
+                size_t buflen)      /* size of buffer to store password in */
+{
+  ssize_t nread;
+  bool disabled;
+  int fd=open("/dev/tty", O_RDONLY);
+  if(-1 == fd)
+    fd = 1; /* use stdin if the tty couldn't be used */
+
+  disabled = ttyecho(FALSE, fd); /* disable terminal echo */
+
+  fputs(prompt, stderr);
+  nread=read(fd, password, buflen);
+  if(nread > 0)
+    password[--nread]=0; /* zero terminate where enter is stored */
+  else
+    password[0]=0; /* got nothing */
+
+  if(disabled) {
+    /* if echo actually was disabled, add a newline */
+    fputs("\n", stderr);
+    ttyecho(TRUE, fd); /* enable echo */
+  }
+
+  if(1 != fd)
+    close(fd);
+
+  return password; /* return pointer to buffer */
+}
+
+#endif /* DONE */
+#endif /* HAVE_GETPASS_R */

src/main.c

@@ -5,7 +5,7 @@
  *                            | (__| |_| |  _ <| |___
  *                             \___|\___/|_| \_\_____|
  *
- * Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
  *
  * This software is licensed as described in the file COPYING, which
  * you should have received as part of this distribution. The terms
@@ -400,13 +400,12 @@ static void help(void)
     "    --socks <host[:port]> Use SOCKS5 proxy on given host + port",
     "    --stderr <file> Where to redirect stderr. - means stdout",
     " -t/--telnet-option <OPT=val> Set telnet option",
-    "    --trace <file>  Dump a network/debug trace to the given file",
+    "    --trace <file>  Write a debug trace to the given file",
     "    --trace-ascii <file> Like --trace but without the hex output",
-    " -T/--upload-file <file> Transfer/upload <file> to remote site",
+    " -T/--upload-file <file> Transfer <file> to remote site",
-    "    --url <URL>     Another way to specify URL to work with",
+    "    --url <URL>     Spet URL to work with",
-    " -u/--user <user[:password]> Specify user and password to use",
+    " -u/--user <user[:password]> Set server user and password",
-    "                    Overrides -n and --netrc-optional",
+    " -U/--proxy-user <user[:password]> Set proxy user and password",
-    " -U/--proxy-user <user[:password]> Specify Proxy authentication",
     " -v/--verbose       Make the operation more talkative",
     " -V/--version       Show version number and quit",
 #ifdef __DJGPP__
@@ -422,6 +421,9 @@ static void help(void)
     " -1/--tlsv1         Use TLSv1 (SSL)",
     " -2/--sslv2         Use SSLv2 (SSL)",
     " -3/--sslv3         Use SSLv3 (SSL)",
+    "    --3p-quote      like -Q for the source URL for 3rd party transfer (F)",
+    "    --3p-url        source URL to activate 3rd party transfer (F)",
+    "    --3p-user       user and password for source 3rd party transfer (F)",
     " -4/--ipv4          Resolve name to IPv4 address",
     " -6/--ipv6          Resolve name to IPv6 address",
     " -#/--progress-bar  Display transfer progress as a progress bar",
@@ -540,6 +542,13 @@ struct Configurable {
   long req_retry;   /* number of retries */
   long retry_delay; /* delay between retries (in seconds) */
   long retry_maxtime; /* maximum time to keep retrying */
+
+  char *tp_url; /* third party URL */
+  char *tp_user; /* third party userpwd */
+  struct curl_slist *tp_quote;
+  struct curl_slist *tp_postquote;
+  struct curl_slist *tp_prequote;
+  char *ftp_account; /* for ACCT */
 };
 
 /* global variable to hold info about libcurl */
@@ -863,7 +872,6 @@ static int formparse(char *input,
               ptr++;
 
             if(curlx_strnequal("type=", ptr, 5)) {
-
               /* set type pointer */
               type = &ptr[5];
 
@@ -878,9 +886,13 @@ static int formparse(char *input,
               /* now point beyond the content-type specifier */
               sep = (char *)type + strlen(major)+strlen(minor)+1;
 
-              *sep=0; /* zero terminate type string */
+              if(*sep) {
+                *sep=0; /* zero terminate type string */
 
-              ptr=sep+1;
+                ptr=sep+1;
+              }
+              else
+                ptr = NULL; /* end */
             }
             else if(curlx_strnequal("filename=", ptr, 9)) {
               filename = &ptr[9];
@@ -1237,6 +1249,11 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
     {"$g", "retry",      TRUE},
     {"$h", "retry-delay", TRUE},
     {"$i", "retry-max-time", TRUE},
+    {"$j", "3p-url", TRUE},
+    {"$k", "3p-user", TRUE},
+    {"$l", "3p-quote", TRUE},
+    {"$m", "ftp-account", TRUE},
+
     {"0", "http1.0",     FALSE},
     {"1", "tlsv1",       FALSE},
     {"2", "sslv2",       FALSE},
@@ -1583,7 +1600,40 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
       case 'i': /* --retry-max-time */
         if(str2num(&config->retry_maxtime, nextarg))
           return PARAM_BAD_NUMERIC;
+        break;
+
+      case 'j': /* --3p-url */
+        GetStr(&config->tp_url, nextarg);
+        break;
+      case 'k': /* --3p-user */
+        GetStr(&config->tp_user, nextarg);
+        break;
+      case 'l': /* --3p-quote */
+        /* QUOTE commands to send to source FTP server */
+        err = PARAM_OK;
+        switch(nextarg[0]) {
+        case '-':
+          /* prefixed with a dash makes it a POST TRANSFER one */
+          nextarg++;
+          err = add2list(&config->tp_postquote, nextarg);
+          break;
+        case '+':
+          /* prefixed with a plus makes it a just-before-transfer one */
+          nextarg++;
+          err = add2list(&config->tp_prequote, nextarg);
+          break;
+        default:
+          err = add2list(&config->tp_quote, nextarg);
+          break;
+        }
+        if(err)
+          return err;
+
+        break;
         /* break */
+      case 'm': /* --ftp-account */
+        GetStr(&config->ftp_account, nextarg);
+        break;
       }
       break;
     case '#': /* added 19990617 larsa */
@@ -2023,7 +2073,7 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
       break;
     case 'V':
     {
-      const char **proto;
+      const char * const *proto;
 
       printf(CURL_ID "%s\n", curl_version());
       if (curlinfo->protocols) {
@@ -2779,10 +2829,20 @@ static void free_config_fields(struct Configurable *config)
     free(config->capath);
   if(config->cookiejar)
     free(config->cookiejar);
+  if(config->tp_url)
+    free(config->tp_url);
+  if(config->tp_user)
+    free(config->tp_user);
+  if(config->ftp_account)
+    free(config->ftp_account);
 
   curl_slist_free_all(config->quote); /* checks for config->quote == NULL */
-  curl_slist_free_all(config->postquote); /*  */
+  curl_slist_free_all(config->prequote);
-  curl_slist_free_all(config->headers); /*  */
+  curl_slist_free_all(config->postquote);
+  curl_slist_free_all(config->tp_quote);
+  curl_slist_free_all(config->tp_prequote);
+  curl_slist_free_all(config->tp_postquote);
+  curl_slist_free_all(config->headers);
 }
 
 #if defined(WIN32) && !defined(__CYGWIN32__)
@@ -2873,8 +2933,14 @@ operate(struct Configurable *config, int argc, char *argv[])
   /* this sends all memory debug messages to a logfile named memdump */
   env = curlx_getenv("CURL_MEMDEBUG");
   if(env) {
+    /* use the value as file name */
+    char *s = strdup(env);
     curl_free(env);
-    curl_memdebug("memdump");
+    curl_memdebug(s);
+    free(s);
+    /* this weird strdup() and stuff here is to make the curl_free() get
+       called before the memdebug() as otherwise the memdebug tracing will
+       with tracing a free() without an alloc! */
   }
   env = curlx_getenv("CURL_MEMLIMIT");
   if(env) {
@@ -3487,6 +3553,7 @@ operate(struct Configurable *config, int argc, char *argv[])
         curl_easy_setopt(curl, CURLOPT_CRLF, config->crlf);
         curl_easy_setopt(curl, CURLOPT_QUOTE, config->quote);
         curl_easy_setopt(curl, CURLOPT_POSTQUOTE, config->postquote);
+        curl_easy_setopt(curl, CURLOPT_PREQUOTE, config->prequote);
         curl_easy_setopt(curl, CURLOPT_WRITEHEADER,
                          config->headerfile?&heads:NULL);
         curl_easy_setopt(curl, CURLOPT_COOKIEFILE, config->cookiefile);
@@ -3599,6 +3666,14 @@ operate(struct Configurable *config, int argc, char *argv[])
           curl_easy_setopt(curl, CURLOPT_PROXYTYPE, CURLPROXY_SOCKS5);
         }
 
+        /* curl 7.13.0 */
+        curl_easy_setopt(curl, CURLOPT_SOURCE_URL, config->tp_url);
+        curl_easy_setopt(curl, CURLOPT_SOURCE_USERPWD, config->tp_user);
+        curl_easy_setopt(curl, CURLOPT_SOURCE_PREQUOTE, config->tp_prequote);
+        curl_easy_setopt(curl, CURLOPT_SOURCE_POSTQUOTE, config->tp_postquote);
+        curl_easy_setopt(curl, CURLOPT_SOURCE_QUOTE, config->tp_quote);
+        curl_easy_setopt(curl, CURLOPT_FTP_ACCOUNT, config->ftp_account);
+
         retry_numretries = config->req_retry;
 
         retrystart = curlx_tvnow();
@@ -3787,9 +3862,6 @@ show_error:
         if(headerfilep)
           fclose(headerfilep);
 
-        if (httpgetfields)
-          free(httpgetfields);
-
         if(url)
           free(url);
 
@@ -3832,6 +3904,9 @@ show_error:
   } /* while-loop through all URLs */
 
 quit_curl:
+  if (httpgetfields)
+    free(httpgetfields);
+
   if (config->engine)
     free(config->engine);
 

src/setup.h

@@ -49,7 +49,7 @@
 #endif
 #endif
 
-#ifdef CURLDEBUG
+#if defined(CURLDEBUG) && defined(CURLTOOLDEBUG)
 /* This is an ugly hack for CURLDEBUG conditions only. We need to include
    the file here, since it might set the _FILE_OFFSET_BITS define, which must
    be set BEFORE all normal system headers. */

src/urlglob.c

@@ -314,7 +314,7 @@ int glob_url(URLGlob** glob, char* url, int *urlnum, FILE *error)
   if(NULL == glob_buffer)
     return CURLE_OUT_OF_MEMORY;
 
-  glob_expand = (URLGlob*)malloc(sizeof(URLGlob));
+  glob_expand = (URLGlob*)calloc(sizeof(URLGlob), 1);
   if(NULL == glob_expand) {
     free(glob_buffer);
     return CURLE_OUT_OF_MEMORY;

src/writeout.c

@@ -52,6 +52,7 @@ typedef enum {
   VAR_SPEED_DOWNLOAD,
   VAR_SPEED_UPLOAD,
   VAR_HTTP_CODE,
+  VAR_HTTP_CODE_PROXY,
   VAR_HEADER_SIZE,
   VAR_REQUEST_SIZE,
   VAR_EFFECTIVE_URL,
@@ -71,6 +72,7 @@ struct variable {
 static const struct variable replacements[]={
   {"url_effective", VAR_EFFECTIVE_URL},
   {"http_code", VAR_HTTP_CODE},
+  {"http_connect", VAR_HTTP_CODE_PROXY},
   {"time_total", VAR_TOTAL_TIME},
   {"time_namelookup", VAR_NAMELOOKUP_TIME},
   {"time_connect", VAR_CONNECT_TIME},
@@ -127,6 +129,12 @@ void ourWriteOut(CURL *curl, char *writeinfo)
                    curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &longinfo))
                   fprintf(stream, "%03ld", longinfo);
                 break;
+              case VAR_HTTP_CODE_PROXY:
+                if(CURLE_OK ==
+                   curl_easy_getinfo(curl, CURLINFO_HTTP_CONNECTCODE,
+                                     &longinfo))
+                  fprintf(stream, "%03ld", longinfo);
+                break;
               case VAR_HEADER_SIZE:
                 if(CURLE_OK ==
                    curl_easy_getinfo(curl, CURLINFO_HEADER_SIZE, &longinfo))

tests/FILEFORMAT

@@ -187,7 +187,14 @@ This verfies that this data was passed to stdout.
 <file name="log/filename">
 the file's contents must be identical to this
 </file>
+<stripfile>
+One perl op per line that operates on the file before being compared. This is
+pretty advanced. Example: "s/^EPRT .*/EPRT stripped/"
+</stripfile>
 <upload>
 the contents of the upload data curl should have sent
 </upload>
+<valgrind>
+disable - disables the valgrind log check for this test
+</valgrind>
 </verify>

tests/data/Makefile.am

@@ -29,8 +29,10 @@ EXTRA_DIST = test1 test108 test117 test127 test20 test27 test34 test46	\
  test184 test185 test186 test187 test188 test189 test191 test192	\
  test193 test194 test195 test196 test197 test198 test515 test516	\
  test517 test518 test210 test211 test212 test220 test221 test222	\
- test223 test224 test206 test207 test208 test209 test213 test240        \
+ test223 test224 test206 test207 test208 test209 test213 test240	\
- test241 test242 test519 test214 test215 test216
+ test241 test242 test519 test214 test215 test216 test217 test218	\
+ test199 test225 test226 test227 test230 test231 test232 test228	\
+ test229
 
 # The following tests have been removed from the dist since they no longer
 # work. We need to fix the test suite's FTPS server first, then bring them

tests/data/test10

@@ -32,7 +32,7 @@ the
    PUT
       feature
 </file>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test100

@@ -1,6 +1,6 @@
 #
 # Server-side
-<reply name="1">
+<reply>
 <data>
 total 20
 drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
@@ -28,7 +28,7 @@ FTP dir list PASV
  <command>
 ftp://%HOSTIP:%FTPPORT/
 </command>
-</test>
+</client>
 
 #
 # Verify data after the test has been "shot"

tests/data/test101

@@ -26,7 +26,7 @@ FTP dir list, PORT with specified IP
  <command>
 ftp://%HOSTIP:%FTPPORT/ -P %HOSTIP
 </command>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test102

@@ -21,11 +21,11 @@ FTP RETR PASV
  <command>
 ftp://%HOSTIP:%FTPPORT/102
 </command>
-</test>
+
 <file name="log/ftpserver.cmd">
 REPLY EPSV 500 no such command
 </file>
-
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test103

@@ -21,22 +21,22 @@ FTP RETR PORT with CWD
  <command>
 ftp://%HOSTIP:%FTPPORT/a/path/103 -P -
 </command>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>
-<strip>
+<strippart>
-^PORT .*
+s/^LPRT.*[\n]//
-^EPRT.*
+s/^EPRT.*[\n]//
-^LPRT.*
+s/^(PORT 127,0,0,1,)([0-9,]+)/$1/
-</strip>
+</strippart>
 <protocol>
 USER anonymous
 PASS curl_by_daniel@haxx.se
 PWD
 CWD a
 CWD path
-PORT 127,0,0,1,246,33
+PORT 127,0,0,1,
 TYPE I
 SIZE 103
 RETR 103

tests/data/test104

@@ -16,7 +16,7 @@ FTP --head to get file size only
  <command>
 ftp://%HOSTIP:%FTPPORT/a/path/103 --head
 </command>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test105

@@ -25,7 +25,7 @@ ftp://userdude:passfellow@%HOSTIP:%FTPPORT/103 --use-ascii
 REPLY EPSV 500 no such command
 REPLY SIZE 500 no such command
 </file>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test106

@@ -21,7 +21,7 @@ FTP GET with type=A style ASCII URL using %20 codes
  <command>
 "ftp://%HOSTIP:%FTPPORT//path%20with%20%20spaces//and%20things2/106;type=A"
 </command>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test107

@@ -18,7 +18,7 @@ works
  <command>
 ftp://%HOSTIP:%FTPPORT/107 -T log/test107.txt
 </command>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test108

@@ -19,7 +19,7 @@ ftp://%HOSTIP:%FTPPORT/CWD/STOR/RETR/108 -T log/upload108 -P -
 Moooooooooooo
  upload this
 </file>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test109

@@ -19,7 +19,7 @@ ftp://%HOSTIP:%FTPPORT/109 -T log/upload109 --append
 Moooooooooooo
  upload this
 </file>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test11

@@ -45,7 +45,7 @@ simple HTTP Location: following
  <command>
 http://%HOSTIP:%HTTPPORT/want/11 -L
 </command>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test110

@@ -23,7 +23,7 @@ ftp://%HOSTIP:%FTPPORT/110 -C 20
 <file name="log/ftpserver.cmd">
 REPLY EPSV 500 no such command
 </file>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test111

@@ -16,7 +16,7 @@ FTP download resume beyond file size
  <command>
 ftp://%HOSTIP:%FTPPORT/111 -C 2000
 </command>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>

tests/data/test112

@@ -18,7 +18,7 @@ this is the *****crap******** that we're gonna upload
 
 worx?
 </file>
-</test>
+</client>
 
 # Verify data after the test has been "shot"
 <verify>