zlib 1.2.3.5

zlib 1.2.3.4
zlib 1.2.3.3
2011-09-09 23:26:49 -07:00 · 2011-09-09 23:26:40 -07:00 · 2011-09-09 23:26:29 -07:00 · 2011-09-09 23:25:38 -07:00 · 2011-09-09 23:25:27 -07:00 · 2011-09-09 23:25:17 -07:00
182 changed files with 30352 additions and 6287 deletions
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -0,0 +1,177 @@
+cmake_minimum_required(VERSION 2.4.4)
+set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
+
+project(zlib C)
+
+if(NOT DEFINED BUILD_SHARED_LIBS)
+    option(BUILD_SHARED_LIBS "Build a shared library form of zlib" ON)
+endif()
+
+include(CheckTypeSize)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+include(CheckCSourceCompiles)
+enable_testing()
+
+check_include_file(sys/types.h HAVE_SYS_TYPES_H)
+check_include_file(stdint.h    HAVE_STDINT_H)
+check_include_file(stddef.h    HAVE_STDDEF_H)
+
+#
+# Check to see if we have large file support
+#
+set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE)
+
+# We add these other definitions here because CheckTypeSize.cmake
+# in CMake 2.4.x does not automatically do so and we want
+# compatibility with CMake 2.4.x.
+if(HAVE_SYS_TYPES_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_TYPES_H)
+endif()
+if(HAVE_STDINT_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDINT_H)
+endif()
+if(HAVE_STDDEF_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDDEF_H)
+endif()
+
+check_type_size(off64_t OFF64_T)
+
+if(HAVE_OFF64_T)
+   add_definitions(-D_LARGEFILE64_SOURCE)
+endif()
+set(CMAKE_REQUIRED_DEFINITIONS) # clear variable
+
+#
+# Check for fseeko
+#
+check_function_exists(fseeko HAVE_FSEEKO)
+if(NOT HAVE_FSEEKO)
+    add_definitions(-DNO_FSEEKO)
+endif()
+
+#
+# Check for unistd.h
+#
+check_include_file(unistd.h HAVE_UNISTD_H)
+
+#
+# Check for errno.h
+check_include_file(errno.h HAVE_ERRNO_H)
+if(NOT HAVE_ERRNO_H)
+   add_definitions(-DNO_ERRNO_H)
+endif()
+
+#
+# Check for mmap support
+#
+set(mmap_test_code "
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+caddr_t hello() {
+  return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0);
+}
+int main() { return 0; }
+")
+check_c_source_compiles("${mmap_test_code}" USE_MMAP)
+if(USE_MMAP)
+    add_definitions(-DUSE_MMAP)
+endif()
+
+#
+# Create the zlibdefs.h file.
+# Note: we create it in CMAKE_CURRENT_SOURCE_DIR instead 
+#       of CMAKE_CURRENT_BINARY_DIR because an empty zlibdefs.h
+#       is shipped with zlib in the source tree.
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/zlibdefs.h.cmakein
+               ${CMAKE_CURRENT_SOURCE_DIR}/zlibdefs.h)
+
+if(MSVC)
+    set(CMAKE_DEBUG_POSTFIX "D")
+    add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
+    add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
+endif()
+
+#============================================================================
+# zlib
+#============================================================================
+
+set(ZLIB_PUBLIC_HDRS
+    zconf.h
+    zlib.h
+    zlibdefs.h
+)
+set(ZLIB_PRIVATE_HDRS
+    crc32.h
+    deflate.h
+    gzguts.h
+    inffast.h
+    inffixed.h
+    inflate.h
+    inftrees.h
+    trees.h
+    zutil.h
+)
+set(ZLIB_SRCS
+    adler32.c
+    compress.c
+    crc32.c
+    deflate.c
+    gzclose.c
+    gzio.c
+    gzlib.c
+    gzread.c
+    gzwrite.c
+    inflate.c
+    infback.c
+    inftrees.c
+    inffast.c
+    trees.c
+    uncompr.c
+    zutil.c
+)
+
+add_library(zlib ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
+set_target_properties(zlib PROPERTIES VERSION 1.2.3.4)
+set_target_properties(zlib PROPERTIES SOVERSION 1)
+if(UNIX)
+   # On unix like platforms the library is almost always called libz
+   set_target_properties(zlib PROPERTIES OUTPUT_NAME z)
+endif()
+
+if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL )
+    install(TARGETS zlib
+        RUNTIME DESTINATION bin
+        ARCHIVE DESTINATION lib
+        LIBRARY DESTINATION lib )
+endif()
+if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL )
+    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION include)
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+    install(FILES zlib.3 DESTINATION share/man/man3)
+endif()
+
+#============================================================================
+# Example binaries
+#============================================================================
+
+add_executable(example example.c)
+target_link_libraries(example zlib)
+add_test(example example)
+
+add_executable(minigzip minigzip.c)
+target_link_libraries(minigzip zlib)
+
+if(HAVE_OFF64_T)
+    add_executable(example64 example.c)
+    target_link_libraries(example64 zlib)
+    set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+    add_test(example64 example64)
+
+    add_executable(minigzip64 minigzip.c)
+    target_link_libraries(minigzip64 zlib)
+    set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+endif()
--- a/267
+++ b/267
@@ -1,6 +1,271 @@

                ChangeLog file for zlib

+Changes in 1.2.3.5 (8 Jan 2010)
+- Add space after #if in zutil.h for some compilers
+- Fix relatively harmless bug in deflate_fast() [Exarevsky]
+- Fix same problem in deflate_slow()
+- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
+- Add deflate_rle() for faster Z_RLE strategy run-length encoding
+- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
+- Change name of "write" variable in inffast.c to avoid library collisions
+- Fix premature EOF from gzread() in gzio.c [Brown]
+- Use zlib header window size if windowBits is 0 in inflateInit2()
+- Remove compressBound() call in deflate.c to avoid linking compress.o
+- Replace use of errno in gz* with functions, support WinCE [Alves]
+- Provide alternative to perror() in minigzip.c for WinCE [Alves]
+- Don't use _vsnprintf on later versions of MSVC [Lowman]
+- Add CMake build script and input file [Lowman]
+- Update contrib/minizip to 1.1 [Svensson, Vollant]
+- Moved nintendods directory from contrib to .
+- Replace gzio.c with a new set of routines with the same functionality
+- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
+- Update contrib/minizip to 1.1b
+
+Changes in 1.2.3.4 (21 Dec 2009)
+- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
+- Update comments in configure and Makefile.in for default --shared
+- Fix test -z's in configure [Marquess]
+- Build examplesh and minigzipsh when not testing
+- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
+- Import LDFLAGS from the environment in configure
+- Fix configure to populate SFLAGS with discovered CFLAGS options
+- Adapt make_vms.com to the new Makefile.in [Zinser]
+- Add zlib2ansi script for C++ compilation [Marquess]
+- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
+- Add AMD64 assembler code for longest match to contrib [Teterin]
+- Include options from $SFLAGS when doing $LDSHARED
+- Simplify 64-bit file support by introducing z_off64_t type
+- Make shared object files in objs directory to work around old Sun cc
+- Use only three-part version number for Darwin shared compiles
+- Add rc option to ar in Makefile.in for when ./configure not run
+- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
+- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
+- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
+- Rename Makefile.in targets allstatic to static and allshared to shared
+- Fix static and shared Makefile.in targets to be independent
+- Correct error return bug in gz_open() by setting state [Brown]
+- Put spaces before ;;'s in configure for better sh compatibility
+- Add pigz.c (parallel implementation of gzip) to examples/
+- Correct constant in crc32.c to UL [Leventhal]
+- Reject negative lengths in crc32_combine()
+- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
+- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
+- Correct typo in doc/algorithm.txt [Janik]
+- Fix bug in adler32_combine() [Zhu]
+- Catch missing-end-of-block-code error in all inflates and in puff
+    Assures that random input to inflate eventually results in an error
+- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
+- Update ENOUGH and its usage to reflect discovered bounds
+- Fix gzerror() error report on empty input file [Brown]
+- Add ush casts in trees.c to avoid pedantic runtime errors
+- Fix typo in zlib.h uncompress() description [Reiss]
+- Correct inflate() comments with regard to automatic header detection
+- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
+- Put new version of gzlog (2.0) in examples with interruption recovery
+- Add puff compile option to permit invalid distance-too-far streams
+- Add puff TEST command options, ability to read piped input
+- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
+  _LARGEFILE64_SOURCE not defined
+- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
+- Fix deflateSetDictionary() to use all 32K for output consistency
+- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
+- Clear bytes after deflate lookahead to avoid use of uninitialized data
+- Change a limit in inftrees.c to be more transparent to Coverity Prevent
+- Update win32/zlib.def with exported symbols from zlib.h
+- Correct spelling error in zlib.h [Willem]
+- Allow Z_BLOCK for deflate() to force a new block
+- Allow negative bits in inflatePrime() to delete existing bit buffer
+- Add Z_TREES flush option to inflate() to return at end of trees
+- Add inflateMark() to return current state information for random access
+- Add Makefile for NintendoDS to contrib [Costa]
+- Add -w in configure compile tests to avoid spurious warnings [Beucler]
+- Fix typos in zlib.h comments for deflateSetDictionary()
+- Fix EOF detection in transparent gzread() [Maier]
+
+Changes in 1.2.3.3 (2 October 2006)
+- Make --shared the default for configure, add a --static option
+- Add compile option to permit invalid distance-too-far streams
+- Add inflateUndermine() function which is required to enable above
+- Remove use of "this" variable name for C++ compatibility [Marquess]
+- Add testing of shared library in make test, if shared library built
+- Use ftello() and fseeko() if available instead of ftell() and fseek()
+- Provide two versions of all functions that use the z_off_t type for
+  binary compatibility -- a normal version and a 64-bit offset version,
+  per the Large File Support Extension when _LARGEFILE64_SOURCE is
+  defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
+  is defined to be 64
+- Add a --uname= option to configure to perhaps help with cross-compiling
+
+Changes in 1.2.3.2 (3 September 2006)
+- Turn off silly Borland warnings [Hay]
+- Use off64_t and define _LARGEFILE64_SOURCE when present
+- Fix missing dependency on inffixed.h in Makefile.in
+- Rig configure --shared to build both shared and static [Teredesai, Truta]
+- Remove zconf.in.h and instead create a new zlibdefs.h file
+- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
+- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
+
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [B<>ck]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+  [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+  trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+  gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+  Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+  doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows 
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+  that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+  un-versioned, the patch adds versioning only for symbols introduced in
+  zlib-1.2.0 or later.  It also declares as local those symbols which are
+  not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+  compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Added zran.c example of compressed data random access to examples
+  directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+  ENOUGH and MAXD -- this repairs a possible security vulnerability for
+  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
+  discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
 Changes in 1.2.1.2 (9 September 2004)
 - Update INDEX file
 - Fix trees.c to update strm->data_type (no one ever noticed!)
@@ -440,7 +705,7 @@ Changes in 1.0.7 (20 Jan 1998)
 Changes in 1.0.6 (19 Jan 1998)
 - add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
- Fix a deflate bug occuring only with compression level 0 (thanks to
+- Fix a deflate bug occurring only with compression level 0 (thanks to
  Andy Buckler for finding this one).
 - In minigzip, pass transparently also the first byte for .Z files.
 - return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
--- a/62
+++ b/62
@@ -77,7 +77,7 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html

 11. Can zlib handle .zip archives?

-    Not by itself, no.  See the directory contrib/minizip in the zlib
+    Not by itself, no. See the directory contrib/minizip in the zlib
    distribution.

 12. Can zlib handle .Z files?
@@ -117,7 +117,7 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
    After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
    generates an error such as:

-        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so: 
+        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
        symbol __register_frame_info: referenced symbol not found

    The symbol __register_frame_info is not part of zlib, it is generated by
@@ -148,13 +148,6 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
    format using deflateInit2(). You can also request that inflate decode
    the gzip format using inflateInit2(). Read zlib.h for more details.

-    Note that you cannot specify special gzip header contents (e.g. a file
-    name or modification date), nor will inflate tell you what was in the
-    gzip header. If you need to customize the header or see what's in it,
-    you can use the raw deflate and inflate operations and the crc32()
-    function and roll your own gzip encoding and decoding. Read the gzip
-    RFC 1952 for details of the header and trailer format.
-
 21. Is zlib thread-safe?

    Yes. However any library routines that zlib uses and any application-
@@ -224,10 +217,14 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html

 29. Does zlib work on MVS, OS/390, CICS, etc.?

-    We don't know for sure. We have heard occasional reports of success on
-    these systems. If you do use it on one of these, please provide us with
-    a report, instructions, and patches that we can reference when we get
-    these questions. Thanks.
+    Yes, there are working ports of zlib 1.1.4 to MVS which you can find
+    here:
+
+    http://www.homerow.net/asm/zlib390.htm
+    http://www.homerow.net/asm/zlibLE.htm
+
+    If these are updated to more recent versions of zlib, please let us
+    know. Thanks.

 30. Is there some simpler, easier to read version of inflate I can look at
    to understand the deflate format?
@@ -278,7 +275,9 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
        http://www.ijs.si/software/snprintf/

    Note that you should be using the most recent version of zlib. Versions
-    1.1.3 and before were subject to a double-free vulnerability.
+    1.1.3 and before were subject to a double-free vulnerability, and version
+    1.2.1 was subject to an access exception when decompressing invalid
+    compressed data.

 34. Is there a Java version of zlib?

@@ -295,20 +294,29 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
    were downright silly. So now, we simply make sure that the code always
    works.

-36. Will zlib read the (insert any ancient or arcane format here) compressed
+36. Valgrind (or some similar memory access checker) says that deflate is
+    performing a conditional jump that depends on an uninitialized value.
+    Isn't that a bug?
+
+    No. That is intentional for performance reasons, and the output of
+    deflate is not affected. This only started showing up recently since
+    zlib 1.2.x uses malloc() by default for allocations, whereas earlier
+    versions used calloc(), which zeros out the allocated memory.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
    data format?

    Probably not. Look in the comp.compression FAQ for pointers to various
    formats and associated software.

-37. How can I encrypt/decrypt zip files with zlib?
+38. How can I encrypt/decrypt zip files with zlib?

    zlib doesn't support encryption. The original PKZIP encryption is very weak
    and can be broken with freely available programs. To get strong encryption,
    use GnuPG, http://www.gnupg.org/ , which already includes zlib compression.
    For PKZIP compatible "encryption", look at http://www.info-zip.org/

-38. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?

    "gzip" is the gzip format, and "deflate" is the zlib format. They should
    probably have called the second one "zlib" instead to avoid confusion
@@ -324,14 +332,30 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html

    Bottom line: use the gzip format for HTTP 1.1 encoding.

-39. Does zlib support the new "Deflate64" format introduced by PKWare?
+40. Does zlib support the new "Deflate64" format introduced by PKWare?

    No. PKWare has apparently decided to keep that format proprietary, since
    they have not documented it as they have previous compression formats.
    In any case, the compression improvements are so modest compared to other
    more modern approaches, that it's not worth the effort to implement.

-40. Can you please sign these lengthy legal documents and fax them back to us
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+    There are no zip functions in zlib. You are probably using minizip by
+    Giles Vollant, which is found in the contrib directory of zlib. It is not
+    part of zlib. In fact none of the stuff in contrib is part of zlib. The
+    files in there are not supported by the zlib authors. You need to contact
+    the authors of the contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+    Since it's part of zlib, doesn't that mean that all of zlib falls under the
+    GNU GPL?
+
+    No. The files in contrib are not part of zlib. They were contributed by
+    other authors and are provided as a convenience to the user within the zlib
+    distribution. Each of the items in contrib have their own license.
+
+43. Can you please sign these lengthy legal documents and fax them back to us
    so that we can use your software in our product?

    No. Go away. Shoo.
--- a/24
+++ b/24
@@ -1,25 +1,35 @@
+CMakeLists.txt  cmake build file
 ChangeLog       history of changes
 FAQ             Frequently Asked Questions about zlib
 INDEX           this file
 Makefile        makefile for Unix (generated by configure)
 Makefile.in     makefile for Unix (template for configure)
 README          guess what
-algorithm.txt   description of the (de)compression algorithm
 configure       configure script for Unix
-zconf.in.h      template for zconf.h (used by configure)
+make_vms.com	makefile for VMS
+treebuild.xml	XML description of source file dependencies
+zlib.3		Man page for zlib
+zlib.map	Linux symbol information
+zlib.pc.in	Template for pkg-config descriptor
+zlib2ansi	perl script to convert source files for C++ compilation

-amiga/		makefiles for Amiga SAS C
+amiga/          makefiles for Amiga SAS C
 as400/          makefiles for IBM AS/400
+doc/		documentation for formats and algorithms
 msdos/          makefiles for MSDOS
+nintendods/	makefile for Nintendo DS
 old/            makefiles for various architectures and zlib documentation
                files that have not yet been updated for zlib 1.2.x
 projects/       projects for various Integrated Development Environments
 qnx/            makefiles for QNX
+watcom/		makefiles for OpenWatcom
 win32/          makefiles for Windows
+zlibdefs.h.cmakein      input file for cmake build

-                zlib public header files (must be kept):
+                zlib public header files (required for library use):
 zconf.h
 zlib.h
+zlibdefs.h

                private source files used to build the zlib library:
 adler32.c
@@ -28,7 +38,12 @@ crc32.c
 crc32.h
 deflate.c
 deflate.h
+gzclose.c
+gzguts.h
 gzio.c
+gzlib.c
+gzread.c
+gzwrite.c
 infback.c
 inffast.c
 inffast.h
@@ -46,6 +61,7 @@ zutil.h
                source files for sample programs:
 example.c
 minigzip.c
+See examples/README.examples for more

                unsupported contribution by third parties
 See contrib/README.contrib
--- a/193
+++ b/193
@@ -1,11 +1,11 @@
 # Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2006 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h

 # To compile and test, type:
 #    ./configure; make test
-# The call of configure is optional if you don't have special requirements
-# If you wish to build zlib as a shared library, use: ./configure -s
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static

 # To use the asm code, type:
 #    cp contrib/asm?86/match.S ./match.S
@@ -24,14 +24,17 @@ CFLAGS=-O
 #CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
 #           -Wstrict-prototypes -Wmissing-prototypes

-LDFLAGS=libz.a
+SFLAGS=-O
+
+LDFLAGS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E

-LIBS=libz.a
+STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1.2
+SHAREDLIBV=libz.so.1.2.3.5
 SHAREDLIBM=libz.so.1
+LIBS=$(STATICLIB) $(SHAREDLIB) $(SHAREDLIBV)

 AR=ar rc
 RANLIB=ranlib
@@ -45,21 +48,36 @@ libdir = ${exec_prefix}/lib
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig

-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzio.o gzlib.o gzread.o \
+	gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o

+PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzio.lo gzlib.lo gzread.lo \
+	gzwrite.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
+
+# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
 OBJA =
-# to use the asm code: make OBJA=match.o
+PIC_OBJA =

-TEST_OBJS = example.o minigzip.o
+OBJS = $(OBJC) $(OBJA)

-all: example$(EXE) minigzip$(EXE)
+PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
+
+all: static shared
+
+static: example$(EXE) minigzip$(EXE)
+
+shared: examplesh$(EXE) minigzipsh$(EXE)
+
+all64: example64$(EXE) minigzip64$(EXE)

 check: test
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
+
+test: all teststatic testshared
+
+teststatic: static
+	@echo hello world | ./minigzip | ./minigzip -d || \
 	  echo '		*** minigzip test FAILED ***' ; \
 	if ./example; then \
 	  echo '		*** zlib test OK ***'; \
@@ -67,8 +85,30 @@ test: all
 	  echo '		*** zlib test FAILED ***'; \
 	fi

-libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS) $(OBJA)
+testshared: shared
+	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
+	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
+	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
+	echo hello world | ./minigzipsh | ./minigzipsh -d || \
+	  echo '		*** minigzip shared test FAILED ***' ; \
+	if ./examplesh; then \
+	  echo '		*** zlib shared test OK ***'; \
+	else \
+	  echo '		*** zlib shared test FAILED ***'; \
+	fi
+
+test64: all64
+	@echo hello world | ./minigzip64 | ./minigzip64 -d || \
+	  echo '		*** minigzip 64-bit test FAILED ***' ; \
+	if ./example64; then \
+	  echo '		*** zlib 64-bit test OK ***'; \
+	else \
+	  echo '		*** zlib 64-bit test FAILED ***'; \
+	fi
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
 	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1

 match.o: match.S
@@ -77,58 +117,100 @@ match.o: match.S
 	mv _match.o match.o
 	rm -f _match.s

-$(SHAREDLIBV): $(OBJS)
-	$(LDSHARED) -o $@ $(OBJS)
+match.lo: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c -fPIC _match.s
+	mv _match.o match.lo
+	rm -f _match.s
+
+example64.o: example.c zlib.h zconf.h zlibdefs.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ $<
+
+minigzip64.o: minigzip.c zlib.h zconf.h zlibdefs.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ $<
+
+.SUFFIXES: .lo
+
+.c.lo:
+	-@if [ ! -d objs ]; then mkdir objs; fi
+	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
+	-@mv objs/$*.o $@
+
+$(SHAREDLIBV): $(PIC_OBJS)
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) -lc
 	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
 	ln -s $@ $(SHAREDLIBM)
+	-@rmdir objs

-example$(EXE): example.o $(LIBS)
+example$(EXE): example.o $(STATICLIB)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)

-minigzip$(EXE): minigzip.o $(LIBS)
+minigzip$(EXE): minigzip.o $(STATICLIB)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)

-install: $(LIBS)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
-	-@if [ ! -d $(includedir)  ]; then mkdir -p $(includedir); fi
-	-@if [ ! -d $(libdir)      ]; then mkdir -p $(libdir); fi
-	-@if [ ! -d $(man3dir)     ]; then mkdir -p $(man3dir); fi
-	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(libdir)
-	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(libdir); if test -f $(SHAREDLIBV); then \
+examplesh$(EXE): example.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
+
+minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
+
+example64$(EXE): example64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ example64.o $(LDFLAGS)
+
+minigzip64$(EXE): minigzip64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(LDFLAGS)
+
+install-libs: $(LIBS)
+	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
+	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
+	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
+	cp $(LIBS) $(DESTDIR)$(libdir)
+	cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
+	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
 	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
-	cp zlib.3 $(man3dir)
-	chmod 644 $(man3dir)/zlib.3
+	cp zlib.3 $(DESTDIR)$(man3dir)
+	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
 # The ranlib in install is needed on NeXTSTEP which checks file times
 # ldconfig is for Linux

+install: install-libs
+	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
+	cp zlib.h zconf.h zlibdefs.h $(DESTDIR)$(includedir)
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h $(DESTDIR)$(includedir)/zlibdefs.h
+
 uninstall:
-	cd $(includedir); \
-	cd $(libdir); rm -f libz.a; \
+	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h zlibdefs.h
+	cd $(DESTDIR)$(libdir); rm -f libz.a; \
 	if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
-	cd $(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc

 mostlyclean: clean
 clean:
-	rm -f *.o *~ example$(EXE) minigzip$(EXE) \
+	rm -f *.o *.lo *~ \
+	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
+	   example64$(EXE) minigzip64$(EXE) \
 	   libz.* foo.gz so_locations \
 	   _match.s maketree contrib/infback9/*.o
+	rm -rf objs

 maintainer-clean: distclean
 distclean: clean
 	cp -p Makefile.in Makefile
-	cp -p zconf.in.h zconf.h
-	rm -f .DS_Store
+	rm zlibdefs.h
+	touch -r configure zlibdefs.h
+	rm -f zlib.pc .DS_Store

 tags:
 	etags *.[ch]
@@ -138,17 +220,22 @@ depend:

 # DO NOT DELETE THIS LINE -- make depend depends on it.

-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: crc32.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h
+adler32.o gzio.o zutil.o: zutil.h zlib.h zconf.h zlibdefs.h
+gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h zlibdefs.h gzguts.h
+compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h zlibdefs.h
+crc32.o: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+infback.o inflate.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
+trees.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h
+
+adler32.lo gzio.lo zutil.lo: zutil.h zlib.h zconf.h zlibdefs.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h zlibdefs.h gzguts.h
+compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h zlibdefs.h
+crc32.lo: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
+deflate.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+infback.lo inflate.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
+inftrees.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
+trees.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,11 +1,11 @@
 # Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2006 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h

 # To compile and test, type:
 #    ./configure; make test
-# The call of configure is optional if you don't have special requirements
-# If you wish to build zlib as a shared library, use: ./configure -s
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static

 # To use the asm code, type:
 #    cp contrib/asm?86/match.S ./match.S
@@ -24,14 +24,17 @@ CFLAGS=-O
 #CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
 #           -Wstrict-prototypes -Wmissing-prototypes

-LDFLAGS=libz.a
+SFLAGS=-O
+
+LDFLAGS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E

-LIBS=libz.a
+STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1.2
+SHAREDLIBV=libz.so.1.2.3.5
 SHAREDLIBM=libz.so.1
+LIBS=$(STATICLIB) $(SHAREDLIB) $(SHAREDLIBV)

 AR=ar rc
 RANLIB=ranlib
@@ -45,21 +48,36 @@ libdir = ${exec_prefix}/lib
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig

-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzio.o gzlib.o gzread.o \
+	gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o

+PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzio.lo gzlib.lo gzread.lo \
+	gzwrite.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
+
+# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
 OBJA =
-# to use the asm code: make OBJA=match.o
+PIC_OBJA =

-TEST_OBJS = example.o minigzip.o
+OBJS = $(OBJC) $(OBJA)

-all: example$(EXE) minigzip$(EXE)
+PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
+
+all: static shared
+
+static: example$(EXE) minigzip$(EXE)
+
+shared: examplesh$(EXE) minigzipsh$(EXE)
+
+all64: example64$(EXE) minigzip64$(EXE)

 check: test
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
+
+test: all teststatic testshared
+
+teststatic: static
+	@echo hello world | ./minigzip | ./minigzip -d || \
 	  echo '		*** minigzip test FAILED ***' ; \
 	if ./example; then \
 	  echo '		*** zlib test OK ***'; \
@@ -67,8 +85,30 @@ test: all
 	  echo '		*** zlib test FAILED ***'; \
 	fi

-libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS) $(OBJA)
+testshared: shared
+	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
+	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
+	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
+	echo hello world | ./minigzipsh | ./minigzipsh -d || \
+	  echo '		*** minigzip shared test FAILED ***' ; \
+	if ./examplesh; then \
+	  echo '		*** zlib shared test OK ***'; \
+	else \
+	  echo '		*** zlib shared test FAILED ***'; \
+	fi
+
+test64: all64
+	@echo hello world | ./minigzip64 | ./minigzip64 -d || \
+	  echo '		*** minigzip 64-bit test FAILED ***' ; \
+	if ./example64; then \
+	  echo '		*** zlib 64-bit test OK ***'; \
+	else \
+	  echo '		*** zlib 64-bit test FAILED ***'; \
+	fi
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
 	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1

 match.o: match.S
@@ -77,58 +117,100 @@ match.o: match.S
 	mv _match.o match.o
 	rm -f _match.s

-$(SHAREDLIBV): $(OBJS)
-	$(LDSHARED) -o $@ $(OBJS)
+match.lo: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c -fPIC _match.s
+	mv _match.o match.lo
+	rm -f _match.s
+
+example64.o: example.c zlib.h zconf.h zlibdefs.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ $<
+
+minigzip64.o: minigzip.c zlib.h zconf.h zlibdefs.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ $<
+
+.SUFFIXES: .lo
+
+.c.lo:
+	-@if [ ! -d objs ]; then mkdir objs; fi
+	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
+	-@mv objs/$*.o $@
+
+$(SHAREDLIBV): $(PIC_OBJS)
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) -lc
 	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
 	ln -s $@ $(SHAREDLIBM)
+	-@rmdir objs

-example$(EXE): example.o $(LIBS)
+example$(EXE): example.o $(STATICLIB)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)

-minigzip$(EXE): minigzip.o $(LIBS)
+minigzip$(EXE): minigzip.o $(STATICLIB)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)

-install: $(LIBS)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
-	-@if [ ! -d $(includedir)  ]; then mkdir -p $(includedir); fi
-	-@if [ ! -d $(libdir)      ]; then mkdir -p $(libdir); fi
-	-@if [ ! -d $(man3dir)     ]; then mkdir -p $(man3dir); fi
-	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(libdir)
-	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(libdir); if test -f $(SHAREDLIBV); then \
+examplesh$(EXE): example.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
+
+minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
+
+example64$(EXE): example64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ example64.o $(LDFLAGS)
+
+minigzip64$(EXE): minigzip64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(LDFLAGS)
+
+install-libs: $(LIBS)
+	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
+	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
+	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
+	cp $(LIBS) $(DESTDIR)$(libdir)
+	cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
+	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
 	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
-	cp zlib.3 $(man3dir)
-	chmod 644 $(man3dir)/zlib.3
+	cp zlib.3 $(DESTDIR)$(man3dir)
+	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
 # The ranlib in install is needed on NeXTSTEP which checks file times
 # ldconfig is for Linux

+install: install-libs
+	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
+	cp zlib.h zconf.h zlibdefs.h $(DESTDIR)$(includedir)
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h $(DESTDIR)$(includedir)/zlibdefs.h
+
 uninstall:
-	cd $(includedir); \
-	cd $(libdir); rm -f libz.a; \
+	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h zlibdefs.h
+	cd $(DESTDIR)$(libdir); rm -f libz.a; \
 	if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
-	cd $(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc

 mostlyclean: clean
 clean:
-	rm -f *.o *~ example$(EXE) minigzip$(EXE) \
+	rm -f *.o *.lo *~ \
+	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
+	   example64$(EXE) minigzip64$(EXE) \
 	   libz.* foo.gz so_locations \
 	   _match.s maketree contrib/infback9/*.o
+	rm -rf objs

 maintainer-clean: distclean
 distclean: clean
 	cp -p Makefile.in Makefile
-	cp -p zconf.in.h zconf.h
-	rm -f .DS_Store
+	rm zlibdefs.h
+	touch -r configure zlibdefs.h
+	rm -f zlib.pc .DS_Store

 tags:
 	etags *.[ch]
@@ -138,17 +220,22 @@ depend:

 # DO NOT DELETE THIS LINE -- make depend depends on it.

-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: crc32.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h
+adler32.o gzio.o zutil.o: zutil.h zlib.h zconf.h zlibdefs.h
+gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h zlibdefs.h gzguts.h
+compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h zlibdefs.h
+crc32.o: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+infback.o inflate.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
+trees.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h
+
+adler32.lo gzio.lo zutil.lo: zutil.h zlib.h zconf.h zlibdefs.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h zlibdefs.h gzguts.h
+compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h zlibdefs.h
+crc32.lo: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
+deflate.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+infback.lo inflate.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
+inftrees.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
+trees.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h
--- a/9
+++ b/9
@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY

-zlib 1.2.1.2 is a general purpose data compression library.  All the code is
+zlib 1.2.3.5 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -16,9 +16,8 @@ minigzip.c.

 To compile all files and run the test program, follow the instructions given at
 the top of Makefile. In short "make test; make install" should work for most
-machines. For Unix: "./configure; make test; make install" For MSDOS, use one
-of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
-descrip.mms.
+machines. For Unix: "./configure; make test; make install". For MSDOS, use one
+of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.

 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
 <info@winimage.com> for the Windows DLL version. The zlib home page is
@@ -34,7 +33,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
 issue of  Dr. Dobb's Journal; a copy of the article is available in
 http://dogma.net/markn/articles/zlibtool/zlibtool.htm

-The changes made in version 1.2.1.2 are documented in the file ChangeLog.
+The changes made in version 1.2.3.5 are documented in the file ChangeLog.

 Unsupported third party contributions are provided in directory "contrib".

--- a/adler32.c
+++ b/adler32.c
@@ -1,23 +1,27 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2007 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

 /* @(#) $Id$ */

-#define ZLIB_INTERNAL
-#include "zlib.h"
+#include "zutil.h"
+
+#define local static
+
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);

 #define BASE 65521UL    /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */

-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
 #define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
 #define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);

+/* use NO_DIVIDE if your processor does not do division in hardware */
 #ifdef NO_DIVIDE
 #  define MOD(a) \
    do { \
@@ -39,8 +43,17 @@
        if (a >= (BASE << 1)) a -= (BASE << 1); \
        if (a >= BASE) a -= BASE; \
    } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
 #else
 #  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
 #endif

 /* ========================================================================= */
@@ -49,26 +62,108 @@ uLong ZEXPORT adler32(adler, buf, len)
    const Bytef *buf;
    uInt len;
 {
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
+    unsigned long sum2;
+    unsigned n;

-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;

-    while (len > 0) {
-        k = len < NMAX ? (int)len : NMAX;
-        len -= k;
-        while (k >= 16) {
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
            DO16(buf);
            buf += 16;
-            k -= 16;
        }
-        if (k != 0) do {
-            s1 += *buf++;
-            s2 += s1;
-        } while (--k);
-        MOD(s1);
-        MOD(s2);
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
    }
-    return (s2 << 16) | s1;
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
 }
--- a/amiga/Makefile.pup
+++ b/amiga/Makefile.pup
@@ -14,8 +14,8 @@ LDFLAGS	= -o
 LDLIBS	= LIB:scppc.a LIB:end.o
 RM	= delete quiet

-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+OBJS = adler32.o compress.o crc32.o gzclose.o gzio.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o

 TEST_OBJS = example.o minigzip.o

@@ -55,7 +55,11 @@ compress.o: zlib.h zconf.h
 crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
 gzio.o: zutil.h zlib.h zconf.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
 inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
--- a/amiga/Makefile.sas
+++ b/amiga/Makefile.sas
@@ -13,8 +13,8 @@ SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
       DEF=POSTINC

-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+OBJS = adler32.o compress.o crc32.o gzclose.o gzio.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o

 TEST_OBJS = example.o minigzip.o

@@ -23,7 +23,7 @@ all: SCOPTIONS example minigzip
 check: test
 test: all
 	example
-	echo hello world | minigzip | minigzip -d 
+	echo hello world | minigzip | minigzip -d

 install: z.lib
 	copy clone zlib.h zconf.h INCLUDE:
@@ -54,7 +54,11 @@ compress.o: zlib.h zconf.h
 crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
 gzio.o: zutil.h zlib.h zconf.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
 inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
--- a/as400/compile.clp
+++ b/as400/compile.clp
@@ -118,6 +118,6 @@
                                 &MODLIB/INFTREES    &MODLIB/TREES       +
                                 &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
-                          TEXT('ZLIB 1.2.1') TGTRLS(V4R4M0)
+                          TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)

             ENDPGM
--- a/as400/readme.txt
+++ b/as400/readme.txt
@@ -1,4 +1,4 @@
-        ZLIB version 1.2.1 for AS400 installation instructions
+        ZLIB version 1.2.3 for AS400 installation instructions

 I) From an AS400 *SAVF file:

--- a/as400/zlib.inc
+++ b/as400/zlib.inc
@@ -1,7 +1,7 @@
      *  ZLIB.INC - Interface to the general purpose compression library
      *
      *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.1.2
+      *  Version 1.2.3.5
      *
      *
      *  WARNING:
@@ -20,8 +20,12 @@
      *                               Constants
      **************************************************************************
      *
-     D ZLIB_VERSION    C                   '1.2.1.2'                            Header's version
-     D ZLIB_VERNUM     C                   X'1212'
+      *  Versioning information.
+      *
+     D ZLIB_VERSION    C                   '1.2.3.5'
+     D ZLIB_VERNUM     C                   X'1235'
+      *
+      *  Other equates.
      *
     D Z_NO_FLUSH      C                   0
     D Z_SYNC_FLUSH    C                   2
--- a/compress.c
+++ b/compress.c
@@ -1,5 +1,5 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -75,5 +75,6 @@ int ZEXPORT compress (dest, destLen, source, sourceLen)
 uLong ZEXPORT compressBound (sourceLen)
    uLong sourceLen;
 {
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
 }
--- a/253
+++ b/253
@@ -1,29 +1,26 @@
 #!/bin/sh
-# configure script for zlib. This script is needed only if
-# you wish to build a shared library and your system supports them,
-# of if you need special compiler, flags or install directory.
-# Otherwise, you can just use directly "make test; make install"
+# configure script for zlib.
 #
-# To create a shared library, use "configure --shared"; by default a static
-# library is created. If the primitive shared library support provided here
-# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
 #
 # To impose specific compiler or flags or install directory, use for example:
 #    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
 # or for csh/tcsh users:
 #    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
-# LDSHARED is the command to be used to create a shared library

 # Incorrect settings of CC or CFLAGS may prevent creating a shared library.
 # If you have problems, try without defining CC and CFLAGS before reporting
 # an error.

-LIBS=libz.a
-LDFLAGS="-L. ${LIBS}"
+STATICLIB=libz.a
+LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
-AR=${AR-"ar rc"}
+AR=${AR-"ar"}
+AR_RC="${AR} rc"
 RANLIB=${RANLIB-"ranlib"}
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-'${prefix}'}
@@ -31,7 +28,8 @@ libdir=${libdir-'${exec_prefix}/lib'}
 includedir=${includedir-'${prefix}/include'}
 mandir=${mandir-'${prefix}/share/man'}
 shared_ext='.so'
-shared=0
+shared=1
+zprefix=0
 gcc=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
@@ -39,21 +37,26 @@ old_cflags="$CFLAGS"
 while test $# -ge 1
 do
 case "$1" in
-    -h* | --h*)
+    -h* | --help)
      echo 'usage:'
      echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
-      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
-        exit 0;;
-    -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-    -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
-    -p* | --p*) prefix="$2"; shift; shift;;
-    -e* | --e*) exec_prefix="$2"; shift; shift;;
-    -l* | --l*) libdir="$2"; shift; shift;;
-    -i* | --i*) includedir="$2"; shift; shift;;
-    -s* | --s*) shared=1; shift;;
-    *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1;;
+      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR] [--zprefix]'
+        exit 0 ;;
+    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift ;;
+    -u*=* | --uname=*) uname=`echo $1 | sed 's/[-a-z_]*=//'`;shift ;;
+    -p* | --prefix) prefix="$2"; shift; shift ;;
+    -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
+    -l* | --libdir) libdir="$2"; shift; shift ;;
+    -i* | --includedir) includedir="$2"; shift; shift ;;
+    -s* | --shared | --enable-shared) shared=1; shift ;;
+    -t | --static) shared=0; shift ;;
+    -z* | --zprefix) zprefix=1; shift ;;
+    --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
+    --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
+    *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
    esac
 done

@@ -68,83 +71,112 @@ cc=${CC-gcc}
 cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
-  *gcc*) gcc=1;;
+  *gcc*) gcc=1 ;;
 esac

 if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
  CC="$cc"
-  SFLAGS=${CFLAGS-"-fPIC -O3"}
-  CFLAGS="$cflags"
-  case `(uname -s || echo unknown) 2>/dev/null` in
-  Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1"};;
+  SFLAGS="${CFLAGS-"-O3"} -fPIC"
+  CFLAGS="${CFLAGS-"-O3"}"
+  if test -z "$uname"; then
+    uname=`(uname -s || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
+  Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
  CYGWIN* | Cygwin* | cygwin* | OS/2* )
-             EXE='.exe';;
+             EXE='.exe' ;;
  QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
         # (alain.bonnefoy@icbt.com)
-                 LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};;
-  HP-UX*)        LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+                 LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
+  HP-UX*)
+         LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+                 shared_ext='.so'
+                 SHAREDLIB='libz.so' ;;
+         *)
                 shared_ext='.sl'
-                 SHAREDLIB='libz.sl';;
+                 SHAREDLIB='libz.sl' ;;
+         esac ;;
  Darwin*)   shared_ext='.dylib'
             SHAREDLIB=libz$shared_ext
             SHAREDLIBV=libz.$VER$shared_ext
             SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBV -compatibility_version $VER2 -current_version $VER"};;
-  *)             LDSHARED=${LDSHARED-"$cc -shared"};;
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
+  *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
  esac
 else
  # find system name and corresponding cc options
  CC=${CC-cc}
-  case `(uname -sr || echo unknown) 2>/dev/null` in
+  if test -z "$uname"; then
+    uname=`(uname -sr || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
             CFLAGS=${CFLAGS-"-O"}
 #            LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
             LDSHARED=${LDSHARED-"ld -b"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+             shared_ext='.so'
+             SHAREDLIB='libz.so' ;;
+         *)
             shared_ext='.sl'
-             SHAREDLIB='libz.sl';;
+             SHAREDLIB='libz.sl' ;;
+         esac ;;
  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
             CFLAGS=${CFLAGS-"-ansi -O2"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
             CFLAGS=${CFLAGS-"-O -std1"}
-             LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
+             LDFLAGS="${LDFLAGS} -Wl,-rpath,."
+             LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;;
  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
             CFLAGS=${CFLAGS-"-O -std1"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
             CFLAGS=${CFLAGS-"-4 -O"}
             LDSHARED=${LDSHARED-"cc"}
             RANLIB=${RANLIB-"true"}
-             AR="cc -A";;
+             AR_RC="cc -A" ;;
  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
             CFLAGS=${CFLAGS-"-O3"}
-             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
-  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
-             CFLAGS=${CFLAGS-"-fast -xcg89"}
-             LDSHARED=${LDSHARED-"cc -G"};;
+             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
+  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         i86*)
+             SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
+             CFLAGS=${CFLAGS-"-xpentium -fast"} ;;
+         *)
+             SFLAGS=${CFLAGS-"-fast -xcg92 -KPIC -R."}
+             CFLAGS=${CFLAGS-"-fast -xcg92"} ;;
+         esac ;;
  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
             CFLAGS=${CFLAGS-"-O2"}
-             LDSHARED=${LDSHARED-"ld"};;
+             LDSHARED=${LDSHARED-"ld"} ;;
+  SunStudio\ 9*) SFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+             CFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xtarget=ultra3 -xarch=v9b"}
+             LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;;
  UNIX_System_V\ 4.2.0)
             SFLAGS=${CFLAGS-"-KPIC -O"}
             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"};;
+             LDSHARED=${LDSHARED-"cc -G"} ;;
  UNIX_SV\ 4.2MP)
             SFLAGS=${CFLAGS-"-Kconform_pic -O"}
             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"};;
+             LDSHARED=${LDSHARED-"cc -G"} ;;
  OpenUNIX\ 5)
             SFLAGS=${CFLAGS-"-KPIC -O"}
             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"};;
+             LDSHARED=${LDSHARED-"cc -G"} ;;
  AIX*)  # Courtesy of dbakker@arrayasolutions.com
             SFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
             CFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
-             LDSHARED=${LDSHARED-"xlc -G"};;
+             LDSHARED=${LDSHARED-"xlc -G"} ;;
  # send working options for other systems to support@gzip.org
  *)         SFLAGS=${CFLAGS-"-O"}
             CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared"} ;;
  esac
 fi

@@ -155,24 +187,66 @@ SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
 if test $shared -eq 1; then
  echo Checking for shared library support...
  # we must test in two steps (cc then ld), required at least on SunOS 4.x
-  if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
+  if test "`($CC -w -c $SFLAGS $test.c) 2>&1`" = "" &&
     test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
-    CFLAGS="$SFLAGS"
-    LIBS="$SHAREDLIBV"
    echo Building shared library $SHAREDLIBV with $CC.
  elif test -z "$old_cc" -a -z "$old_cflags"; then
    echo No shared library support.
    shared=0;
  else
+    echo Tested $CC -w -c $SFLAGS $test.c
+    $CC -w -c $SFLAGS $test.c
+    echo Tested $LDSHARED -o $test$shared_ext $test.o
+    $LDSHARED -o $test$shared_ext $test.o
    echo 'No shared library support; try without defining CC and CFLAGS'
    shared=0;
  fi
 fi
 if test $shared -eq 0; then
  LDSHARED="$CC"
-  echo Building static library $LIBS version $VER with $CC.
+  ALL="static"
+  TEST="all teststatic"
+  echo Building static library $STATICLIB version $VER with $CC.
 else
-  LDFLAGS="-L. ${SHAREDLIBV}"
+  ALL="static shared"
+  TEST="all teststatic testshared"
+fi
+
+cat > zlibdefs.h << EOF
+/* zlibdefs.h -- compile-time definitions for the zlib compression library
+ * Copyright (C) 1995-2006 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+EOF
+
+cat > $test.c <<EOF
+#include <sys/types.h>
+off64_t dummy = 0;
+EOF
+if test "`($CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c) 2>&1`" = ""; then
+  CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1"
+  SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1"
+  ALL="${ALL} all64"
+  TEST="${TEST} test64"
+  echo "Checking for off64_t... Yes."
+  echo "Checking for fseeko... Yes."
+else
+  echo "Checking for off64_t... No."
+  cat > $test.c <<EOF
+#include <stdio.h>
+int main(void) {
+  fseeko(NULL, 0, 0);
+  return 0;
+}
+EOF
+  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+    echo "Checking for fseeko... Yes."
+  else
+    CFLAGS="${CFLAGS} -DNO_FSEEKO"
+    SFLAGS="${SFLAGS} -DNO_FSEEKO"
+    echo "Checking for fseeko... No."
+  fi
 fi

 cat > $test.c <<EOF
@@ -180,13 +254,27 @@ cat > $test.c <<EOF
 int main() { return 0; }
 EOF
 if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  sed < zconf.in.h "/HAVE_UNISTD_H/s%0%1%" > zconf.h
+  cat >> zlibdefs.h <<EOF
+#include <sys/types.h>	/* for off_t */
+#include <unistd.h>	/* for SEEK_* and off_t */
+#ifdef VMS
+#  include <unixio.h>	/* for off_t */
+#endif
+#ifndef z_off_t
+#  define z_off_t off_t
+#endif
+EOF
  echo "Checking for unistd.h... Yes."
 else
-  cp -p zconf.in.h zconf.h
  echo "Checking for unistd.h... No."
 fi

+if test $zprefix -eq 1; then
+  sed < zconf.h "/#ifdef Z_PREFIX/s/def Z_PREFIX/ 1/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Using z_ prefix on all symbols."
+fi
+
 cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
@@ -203,7 +291,7 @@ int main()
 EOF

 if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()"
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()."

  cat > $test.c <<EOF
 #include <stdio.h>
@@ -255,6 +343,7 @@ EOF
      echo "Checking for return value of vsnprintf()... Yes."
    else
      CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsnprintf_void"
      echo "Checking for return value of vsnprintf()... No."
      echo "  WARNING: apparently vsnprintf() does not return a value. zlib"
      echo "  can build but will be open to possible string-format security"
@@ -262,6 +351,7 @@ EOF
    fi
  else
    CFLAGS="$CFLAGS -DNO_vsnprintf"
+    SFLAGS="$SFLAGS -DNO_vsnprintf"
    echo "Checking for vsnprintf() in stdio.h... No."
    echo "  WARNING: vsnprintf() not found, falling back to vsprintf(). zlib"
    echo "  can build but will be open to possible buffer-overflow security"
@@ -293,6 +383,7 @@ EOF
      echo "Checking for return value of vsprintf()... Yes."
    else
      CFLAGS="$CFLAGS -DHAS_vsprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsprintf_void"
      echo "Checking for return value of vsprintf()... No."
      echo "  WARNING: apparently vsprintf() does not return a value. zlib"
      echo "  can build but will be open to possible string-format security"
@@ -300,7 +391,7 @@ EOF
    fi
  fi
 else
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()"
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()."

  cat >$test.c <<EOF
 #include <stdio.h>
@@ -342,6 +433,7 @@ EOF
      echo "Checking for return value of snprintf()... Yes."
    else
      CFLAGS="$CFLAGS -DHAS_snprintf_void"
+      SFLAGS="$SFLAGS -DHAS_snprintf_void"
      echo "Checking for return value of snprintf()... No."
      echo "  WARNING: apparently snprintf() does not return a value. zlib"
      echo "  can build but will be open to possible string-format security"
@@ -349,6 +441,7 @@ EOF
    fi
  else
    CFLAGS="$CFLAGS -DNO_snprintf"
+    SFLAGS="$SFLAGS -DNO_snprintf"
    echo "Checking for snprintf() in stdio.h... No."
    echo "  WARNING: snprintf() not found, falling back to sprintf(). zlib"
    echo "  can build but will be open to possible buffer-overflow security"
@@ -374,6 +467,7 @@ EOF
      echo "Checking for return value of sprintf()... Yes."
    else
      CFLAGS="$CFLAGS -DHAS_sprintf_void"
+      SFLAGS="$SFLAGS -DHAS_sprintf_void"
      echo "Checking for return value of sprintf()... No."
      echo "  WARNING: apparently sprintf() does not return a value. zlib"
      echo "  can build but will be open to possible string-format security"
@@ -391,6 +485,7 @@ if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
 else
  echo "Checking for errno.h... No."
  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+  SFLAGS="$SFLAGS -DNO_ERRNO_H"
 fi

 cat > $test.c <<EOF
@@ -403,6 +498,7 @@ caddr_t hello() {
 EOF
 if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
  CFLAGS="$CFLAGS -DUSE_MMAP"
+  SFLAGS="$SFLAGS -DUSE_MMAP"
  echo Checking for mmap support... Yes.
 else
  echo Checking for mmap support... No.
@@ -416,7 +512,7 @@ case $CFLAGS in
      echo Checking for underline in external names... No.
    else
      echo Checking for underline in external names... Yes.
-    fi;;
+    fi ;;
 esac

 rm -f $test.[co] $test $test$shared_ext
@@ -425,13 +521,36 @@ rm -f $test.[co] $test $test$shared_ext
 sed < Makefile.in "
 /^CC *=/s#=.*#=$CC#
 /^CFLAGS *=/s#=.*#=$CFLAGS#
-/^CPP *=/s#=.*#=$CPP#
+/^SFLAGS *=/s#=.*#=$SFLAGS#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
 /^LDSHARED *=/s#=.*#=$LDSHARED#
-/^LIBS *=/s#=.*#=$LIBS#
+/^CPP *=/s#=.*#=$CPP#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
 /^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
 /^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
 /^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
-/^AR *=/s#=.*#=$AR#
+/^AR *=/s#=.*#=$AR_RC#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^all: */s#:.*#: $ALL#
+/^test: */s#:.*#: $TEST#
+" > Makefile
+
+sed < zlib.pc.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^CPP *=/s#=.*#=$CPP#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR_RC#
 /^RANLIB *=/s#=.*#=$RANLIB#
 /^EXE *=/s#=.*#=$EXE#
 /^prefix *=/s#=.*#=$prefix#
@@ -440,4 +559,6 @@ sed < Makefile.in "
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
 /^LDFLAGS *=/s#=.*#=$LDFLAGS#
-" > Makefile
+" | sed -e "
+s/\@VERSION\@/$VER/g;
+" > zlib.pc
--- a/contrib/README.contrib
+++ b/contrib/README.contrib
@@ -8,6 +8,10 @@ ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
        Support for Ada
        See http://zlib-ada.sourceforge.net/

+amd64/      by Mikhail Teterin <mi@ALDAN.algebra.com>
+        asm code for AMD64
+        See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
+
 asm586/
 asm686/     by Brian Raiter <breadbox@muppetlabs.com>
        asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
@@ -19,8 +23,8 @@ blast/      by Mark Adler <madler@alumni.caltech.edu>
 delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
        Support for Delphi and C++ Builder

-gzappend/   by Mark Adler <madler@alumni.caltech.edu>
-        append to a gzip file -- illustrates the use of Z_BLOCK
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
+        Support for Microsoft .Net and Visual C++ .Net

 infback9/   by Mark Adler <madler@alumni.caltech.edu>
        Unsupported diffs to infback to decode the deflate64 format
@@ -42,12 +46,17 @@ masm686/    by Dan Higdon <hdan@kinesoft.com>
            and Chuck Walbourn <chuckw@kinesoft.com>
        asm code for Pentium Pro/PII, using the MASM syntax

+masmx64/    by Gilles Vollant <info@winimage.com>
+	x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+	replace longest_match() and inflate_fast()
+
 masmx86/    by Gilles Vollant <info@winimage.com>
        x86 asm code to replace longest_match() and inflate_fast(),
        for Visual C++ and MASM

 minizip/    by Gilles Vollant <info@winimage.com>
        Mini zip and unzip based on zlib
+	Includes Zip64 support by Mathias Svensson <mathias@result42.com>
        See http://www.winimage.com/zLibDll/unzip.html

 pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.
@@ -60,11 +69,8 @@ puff/       by Mark Adler <madler@alumni.caltech.edu>
 testzlib/   by Gilles Vollant <info@winimage.com>
        Example of the use of zlib

-untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
        A very simple tar.gz file extractor using zlib

-visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB
-
 vstudio/    by Gilles Vollant <info@winimage.com>
-        Building a minizip-enhanced zlib with Visual Studio .NET
+        Building a minizip-enhanced zlib with Microsoft Visual Studio
--- a/contrib/ada/readme.txt
+++ b/contrib/ada/readme.txt
@@ -1,12 +1,12 @@
-			ZLib for Ada thick binding (ZLib.Ada)
-			Release 1.3
+                        ZLib for Ada thick binding (ZLib.Ada)
+                        Release 1.3

 ZLib.Ada is a thick binding interface to the popular ZLib data
 compression library, available at http://www.gzip.org/zlib/.
 It provides Ada-style access to the ZLib C library.


-	Here are the main changes since ZLib.Ada 1.2:
+        Here are the main changes since ZLib.Ada 1.2:

 - Attension: ZLib.Read generic routine have a initialization requirement
  for Read_Last parameter now. It is a bit incompartible with previous version,
@@ -28,7 +28,7 @@ It provides Ada-style access to the ZLib C library.
 - Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.


-	How to build ZLib.Ada under GNAT
+        How to build ZLib.Ada under GNAT

 You should have the ZLib library already build on your computer, before
 building ZLib.Ada. Make the directory of ZLib.Ada sources current and
@@ -41,7 +41,7 @@ Or use the GNAT project file build for GNAT 3.15 or later:
  gnatmake -Pzlib.gpr -L<directory where libz.a is>


-	How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
+        How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2

 1. Make a project with all *.ads and *.adb files from the distribution.
 2. Build the libz.a library from the ZLib C sources.
@@ -51,7 +51,7 @@ Or use the GNAT project file build for GNAT 3.15 or later:
 6. Build the executable using test.adb as a main procedure.


-	How to use ZLib.Ada
+        How to use ZLib.Ada

 The source files test.adb and read.adb are small demo programs that show
 the main functionality of ZLib.Ada.
--- a/contrib/ada/zlib-streams.adb
+++ b/contrib/ada/zlib-streams.adb
@@ -222,4 +222,4 @@ package body ZLib.Streams is
      return Total_Out (Stream.Writer);
   end Write_Total_Out;

-end ZLib.Streams;
+end ZLib.Streams;
--- a/contrib/ada/zlib-streams.ads
+++ b/contrib/ada/zlib-streams.ads
@@ -111,4 +111,4 @@ private
      Writer     : Filter_Type;
   end record;

-end ZLib.Streams;
+end ZLib.Streams;
--- a/contrib/ada/zlib.gpr
+++ b/contrib/ada/zlib.gpr
@@ -1,21 +1,20 @@
-project Zlib is
-
-   for Languages use ("Ada");
-   for Source_Dirs use (".");
-   for Object_Dir use ".";
-   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
-
-   package Compiler is
-      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
-   end Compiler;
-
-   package Linker is
-      for Default_Switches ("ada") use ("-lz");
-   end Linker;
-
-   package Builder is
-      for Default_Switches ("ada") use ("-s", "-gnatQ");
-   end Builder;
-
-end Zlib;
-
+project Zlib is
+
+   for Languages use ("Ada");
+   for Source_Dirs use (".");
+   for Object_Dir use ".";
+   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
+
+   package Compiler is
+      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+   end Compiler;
+
+   package Linker is
+      for Default_Switches ("ada") use ("-lz");
+   end Linker;
+
+   package Builder is
+      for Default_Switches ("ada") use ("-s", "-gnatQ");
+   end Builder;
+
+end Zlib;
--- a/contrib/amd64/amd64-match.S
+++ b/contrib/amd64/amd64-match.S
@@ -0,0 +1,357 @@
+/*
+ * match.S -- optimized version of longest_match()
+ * based on the similar work by Gilles Vollant, and Brian Raiter, written 1998
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the BSD License. Use by owners of Che Guevarra
+ * parafernalia is prohibited, where possible, and highly discouraged
+ * elsewhere.
+ */
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+#define	scanend		ebx
+#define	scanendw	bx
+#define	chainlenwmask	edx /* high word: current chain len low word: s->wmask */
+#define	curmatch	rsi
+#define	curmatchd	esi
+#define	windowbestlen	r8
+#define	scanalign	r9
+#define	scanalignd	r9d
+#define	window		r10
+#define	bestlen		r11
+#define	bestlend	r11d
+#define	scanstart	r12d
+#define	scanstartw	r12w
+#define scan		r13
+#define nicematch	r14d
+#define	limit		r15
+#define	limitd		r15d
+#define prev		rcx
+
+/*
+ * The 258 is a "magic number, not a parameter -- changing it
+ * breaks the hell loose
+ */
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+#define	LocalVarsSize	(112)
+#define _chainlenwmask	( 8-LocalVarsSize)(%rsp)
+#define _windowbestlen	(16-LocalVarsSize)(%rsp)
+#define save_r14        (24-LocalVarsSize)(%rsp)
+#define save_rsi        (32-LocalVarsSize)(%rsp)
+#define save_rbx        (40-LocalVarsSize)(%rsp)
+#define save_r12        (56-LocalVarsSize)(%rsp)
+#define save_r13        (64-LocalVarsSize)(%rsp)
+#define save_r15        (80-LocalVarsSize)(%rsp)
+
+/*
+ * On AMD64 the first argument of a function (in our case -- the pointer to
+ * deflate_state structure) is passed in %rdi, hence our offsets below are
+ * all off of that.
+ */
+#ifndef STRUCT_OFFSET
+#	define STRUCT_OFFSET	(0)
+#endif
+#define dsWSize		( 56 + STRUCT_OFFSET)(%rdi)
+#define dsWMask		( 64 + STRUCT_OFFSET)(%rdi)
+#define dsWindow	( 72 + STRUCT_OFFSET)(%rdi)
+#define dsPrev		( 88 + STRUCT_OFFSET)(%rdi)
+#define dsMatchLen	(136 + STRUCT_OFFSET)(%rdi)
+#define dsPrevMatch	(140 + STRUCT_OFFSET)(%rdi)
+#define dsStrStart	(148 + STRUCT_OFFSET)(%rdi)
+#define dsMatchStart	(152 + STRUCT_OFFSET)(%rdi)
+#define dsLookahead	(156 + STRUCT_OFFSET)(%rdi)
+#define dsPrevLen	(160 + STRUCT_OFFSET)(%rdi)
+#define dsMaxChainLen	(164 + STRUCT_OFFSET)(%rdi)
+#define dsGoodMatch	(180 + STRUCT_OFFSET)(%rdi)
+#define dsNiceMatch	(184 + STRUCT_OFFSET)(%rdi)
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+/*
+ * Retrieve the function arguments. %curmatch will hold cur_match
+ * throughout the entire function (passed via rsi on amd64).
+ * rdi will hold the pointer to the deflate_state (first arg on amd64)
+ */
+		mov     %rsi, save_rsi
+		mov     %rbx, save_rbx
+		mov	%r12, save_r12
+		mov     %r13, save_r13
+		mov     %r14, save_r14
+		mov     %r15, save_r15
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen, %eax
+		movl	dsGoodMatch, %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask, %eax
+		movl	dsMaxChainLen, %chainlenwmask
+		jl	LastMatchGood
+		shrl	$2, %chainlenwmask
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%chainlenwmask
+		shll	$16, %chainlenwmask
+		orl	%eax, %chainlenwmask
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch, %eax
+		movl	dsLookahead, %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, %nicematch
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		mov	dsWindow, %window
+		movl	dsStrStart, %limitd
+		lea	(%limit, %window), %scan
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		mov	%scan, %scanalign
+		negl	%scanalignd
+		andl	$3, %scanalignd
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize, %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		xorl	%ecx, %ecx
+		subl	%eax, %limitd
+		cmovng	%ecx, %limitd
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen, %bestlend
+
+/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory.	*/
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%scan), %scanstart
+		movzwl	-1(%scan, %bestlen), %scanend
+		mov	dsPrev, %prev
+
+/* Jump into the main loop.						*/
+
+		movl	%chainlenwmask, _chainlenwmask
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ */
+LookupLoop:
+		andl	%chainlenwmask, %curmatchd
+		movzwl	(%prev, %curmatch, 2), %curmatchd
+		cmpl	%limitd, %curmatchd
+		jbe	LeaveNow
+		subl	$0x00010000, %chainlenwmask
+		js	LeaveNow
+LoopEntry:	cmpw	-1(%windowbestlen, %curmatch), %scanendw
+		jne	LookupLoop
+		cmpw	%scanstartw, (%window, %curmatch)
+		jne	LookupLoop
+
+/* Store the current value of chainlen.					*/
+		movl	%chainlenwmask, _chainlenwmask
+
+/* %scan is the string under scrutiny, and %prev to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		mov	$(-MAX_MATCH_8), %rdx
+		lea	(%curmatch, %window), %windowbestlen
+		lea	MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen
+		lea	MAX_MATCH_8(%scan, %scanalign), %prev
+
+/* the prefetching below makes very little difference... */
+		prefetcht1	(%windowbestlen, %rdx)
+		prefetcht1	(%prev, %rdx)
+
+/*
+ * Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %rdx so that it is offset to the exact byte that mismatched.
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance -- unrolling it, for example, makes no difference.
+ */
+#undef USE_SSE	/* works, but is 6-7% slower, than non-SSE... */
+LoopCmps:
+#ifdef USE_SSE
+		/* Preload the SSE registers */
+		movdqu	  (%windowbestlen, %rdx), %xmm1
+		movdqu	  (%prev, %rdx), %xmm2
+		pcmpeqb	%xmm2, %xmm1
+		movdqu	16(%windowbestlen, %rdx), %xmm3
+		movdqu	16(%prev, %rdx), %xmm4
+		pcmpeqb	%xmm4, %xmm3
+		movdqu	32(%windowbestlen, %rdx), %xmm5
+		movdqu	32(%prev, %rdx), %xmm6
+		pcmpeqb	%xmm6, %xmm5
+		movdqu	48(%windowbestlen, %rdx), %xmm7
+		movdqu	48(%prev, %rdx), %xmm8
+		pcmpeqb	%xmm8, %xmm7
+
+		/* Check the comparisions' results */
+		pmovmskb %xmm1, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		add	$16, %rdx
+		pmovmskb %xmm3, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		add	$16, %rdx
+		pmovmskb %xmm5, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		add	$16, %rdx
+		pmovmskb %xmm7, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		add	$16, %rdx
+		jmp	LoopCmps
+LeaveLoopCmps:	add	%rax, %rdx
+#else
+		mov	(%windowbestlen, %rdx), %rax
+		xor	(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps
+		add	$8, %rdx
+		jnz	LoopCmps
+		jmp	LenMaximum
+#	if 0
+/*
+ * This three-liner is tantalizingly simple, but bsf is a slow instruction,
+ * and the complicated alternative down below is quite a bit faster. Sad...
+ */
+LeaveLoopCmps:	bsf	%rax, %rax /* find the first non-zero bit */
+		shrl	$3, %eax /* divide by 8 to get the byte */
+		add	%rax, %rdx
+#	else
+LeaveLoopCmps:	testl   $0xFFFFFFFF, %eax /* Check the first 4 bytes */
+		jnz     Check16
+		add     $4, %rdx
+		shr     $32, %rax
+Check16:        testw   $0xFFFF, %ax
+		jnz     LenLower
+		add	$2, %rdx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adc	$0, %rdx
+#	endif
+#endif
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%prev, %rdx), %rax
+		sub	%scan, %rax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		cmpl	%bestlend, %eax
+		jg	LongerMatch
+		mov	_windowbestlen, %windowbestlen
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:
+		movl	%eax, %bestlend
+		movl	%curmatchd, dsMatchStart
+		cmpl	%nicematch, %eax
+		jge	LeaveNow
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+		movzwl	-1(%scan, %rax), %scanend
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %chainlenwmask
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:
+		movl	$MAX_MATCH, %bestlend
+		movl	%curmatchd, dsMatchStart
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	dsLookahead, %eax
+		cmpl	%eax, %bestlend
+		cmovngl	%bestlend, %eax
+LookaheadRet:
+
+/* Restore the registers and return from whence we came.			*/
+
+	mov	save_rsi, %rsi
+	mov	save_rbx, %rbx
+	mov	save_r12, %r12
+	mov	save_r13, %r13
+	mov	save_r14, %r14
+	mov	save_r15, %r15
+
+	ret
+
+match_init:	ret
--- a/contrib/asm586/match.S
+++ b/contrib/asm586/match.S
@@ -45,19 +45,29 @@
 * program to crash horribly, without so much as a warning at
 * compile time. Sigh.)
 */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
+
+/* All the +zlib1222add offsets are due to the addition of fields
+ *  in zlib in the deflate_state structure since the asm code was first written
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+ */
+
+#define zlib1222add		(8)
+
+#define	dsWSize			(36+zlib1222add)
+#define	dsWMask			(44+zlib1222add)
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)


 .file "match.S"
--- a/contrib/asm686/match.S
+++ b/contrib/asm686/match.S
@@ -38,26 +38,28 @@
 #define	deflatestate		56	/* the function arguments	*/
 #define	curmatch		60

-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
+/* All the +zlib1222add offsets are due to the addition of fields
+ *  in zlib in the deflate_state structure since the asm code was first written
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
 */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
+
+#define zlib1222add		(8)
+
+#define	dsWSize			(36+zlib1222add)
+#define	dsWMask			(44+zlib1222add)
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)


 .file "match.S"
--- a/contrib/delphi/ZLib.pas
+++ b/contrib/delphi/ZLib.pas
@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
  const OutBuf: Pointer; BufSize: Integer);

 const
-  zlib_version = '1.2.2';
+  zlib_version = '1.2.3';

 type
  EZlibError = class(Exception);
@@ -344,7 +344,7 @@ begin
    strm.avail_out := OutBytes;
    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
    try
-      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
      begin
        P := OutBuf;
        Inc(OutBytes, BufInc);
--- a/contrib/delphi/zlibd32.mak
+++ b/contrib/delphi/zlibd32.mak
@@ -18,10 +18,10 @@ LDFLAGS =
 # variables
 ZLIB_LIB = zlib.lib

-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
-OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
-OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzio.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzio.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj


 # targets
@@ -38,8 +38,16 @@ crc32.obj: crc32.c zlib.h zconf.h crc32.h

 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h

+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
 gzio.obj: gzio.c zutil.h zlib.h zconf.h

+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
 infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
 inffast.h inffixed.h

--- a/contrib/dotzlib/DotZLib.build
+++ b/contrib/dotzlib/DotZLib.build
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<project name="DotZLib" default="build" basedir="./DotZLib">
+	<description>A .Net wrapper library around ZLib1.dll</description>
+
+	<property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
+	<property name="build.root" value="bin" />
+	
+	<property name="debug" value="true" />
+	<property name="nunit" value="true" />
+
+	<property name="build.folder" value="${build.root}/debug/" if="${debug}" />
+	<property name="build.folder" value="${build.root}/release/" unless="${debug}" />
+
+	<target name="clean" description="Remove all generated files">
+		<delete dir="${build.root}" failonerror="false" />
+	</target>
+
+	<target name="build" description="compiles the source code">
+		
+		<mkdir dir="${build.folder}" />
+		<csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
+			<references basedir="${nunit.location}">
+				<includes if="${nunit}" name="nunit.framework.dll" />
+			</references>
+			<sources>
+				<includes name="*.cs" />
+				<excludes name="UnitTests.cs" unless="${nunit}" />
+			</sources>
+			<arg value="/d:nunit" if="${nunit}" />
+		</csc>
+	</target>
+
+</project>
--- a/contrib/dotzlib/DotZLib.chm
+++ b/contrib/dotzlib/DotZLib.chm
--- a/contrib/dotzlib/DotZLib.sln
+++ b/contrib/dotzlib/DotZLib.sln
@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal
--- a/contrib/dotzlib/DotZLib/AssemblyInfo.cs
+++ b/contrib/dotzlib/DotZLib/AssemblyInfo.cs
@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("DotZLib")]
+[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Henrik Ravn")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]
--- a/contrib/dotzlib/DotZLib/ChecksumImpl.cs
+++ b/contrib/dotzlib/DotZLib/ChecksumImpl.cs
@@ -0,0 +1,202 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+    #region ChecksumGeneratorBase
+    /// <summary>
+    /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
+    /// </summary>
+    /// <example></example>
+    public abstract class ChecksumGeneratorBase : ChecksumGenerator
+    {
+        /// <summary>
+        /// The value of the current checksum
+        /// </summary>
+        protected uint _current;
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator base - the current checksum is 
+        /// set to zero
+        /// </summary>
+        public ChecksumGeneratorBase()
+        {
+            _current = 0;
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator basewith a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public ChecksumGeneratorBase(uint initialValue)
+        {
+            _current = initialValue;
+        }
+
+        /// <summary>
+        /// Resets the current checksum to zero
+        /// </summary>
+        public void Reset() { _current = 0; }
+
+        /// <summary>
+        /// Gets the current checksum value
+        /// </summary>
+        public uint Value { get { return _current; } }
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one. 
+        /// This is therefore the only method a derived class has to implement</remarks>
+        public abstract void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes.
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        public void Update(byte[] data)
+        {
+            Update(data, 0, data.Length);
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        public void Update(string data)
+        {
+			Update(Encoding.UTF8.GetBytes(data));
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        public void Update(string data, Encoding encoding)
+        {
+            Update(encoding.GetBytes(data));
+        }
+
+    }
+    #endregion
+
+    #region CRC32
+    /// <summary>
+    /// Implements a CRC32 checksum generator
+    /// </summary>
+    public sealed class CRC32Checksum : ChecksumGeneratorBase    
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint crc32(uint crc, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator
+        /// </summary>
+        public CRC32Checksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public CRC32Checksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+    #region Adler
+    /// <summary>
+    /// Implements a checksum generator that computes the Adler checksum on data
+    /// </summary>
+    public sealed class AdlerChecksum : ChecksumGeneratorBase    
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint adler32(uint adler, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator
+        /// </summary>
+        public AdlerChecksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public AdlerChecksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+}
--- a/contrib/dotzlib/DotZLib/CircularBuffer.cs
+++ b/contrib/dotzlib/DotZLib/CircularBuffer.cs
@@ -0,0 +1,83 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+
+namespace DotZLib
+{
+
+	/// <summary>
+	/// This class implements a circular buffer
+	/// </summary>
+	internal class CircularBuffer
+	{
+        #region Private data
+        private int _capacity;
+        private int _head;
+        private int _tail;
+        private int _size;
+        private byte[] _buffer;
+        #endregion
+
+        public CircularBuffer(int capacity)
+        {    
+            Debug.Assert( capacity > 0 );
+            _buffer = new byte[capacity];
+            _capacity = capacity;
+            _head = 0;
+            _tail = 0;
+            _size = 0;
+        }
+
+        public int Size { get { return _size; } }
+
+        public int Put(byte[] source, int offset, int count)
+        {
+            Debug.Assert( count > 0 );
+            int trueCount = Math.Min(count, _capacity - Size);
+            for (int i = 0; i < trueCount; ++i)
+                _buffer[(_tail+i) % _capacity] = source[offset+i];
+            _tail += trueCount;
+            _tail %= _capacity;
+            _size += trueCount;
+            return trueCount;
+        }
+
+        public bool Put(byte b)
+        {
+            if (Size == _capacity) // no room
+                return false;
+            _buffer[_tail++] = b;
+            _tail %= _capacity;
+            ++_size;
+            return true;
+        }
+
+        public int Get(byte[] destination, int offset, int count)
+        {
+            int trueCount = Math.Min(count,Size);
+            for (int i = 0; i < trueCount; ++i)
+                destination[offset + i] = _buffer[(_head+i) % _capacity];
+            _head += trueCount;
+            _head %= _capacity;
+            _size -= trueCount;
+            return trueCount;
+        }
+
+        public int Get()
+        {
+            if (Size == 0)
+                return -1;
+
+            int result = (int)_buffer[_head++ % _capacity];
+            --_size;
+            return result;
+        }
+
+    }
+}
--- a/contrib/dotzlib/DotZLib/CodecBase.cs
+++ b/contrib/dotzlib/DotZLib/CodecBase.cs
@@ -0,0 +1,198 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements the common functionality needed for all <see cref="Codec"/>s
+	/// </summary>
+	public abstract class CodecBase : Codec, IDisposable
+	{
+
+        #region Data members
+
+        /// <summary>
+        /// Instance of the internal zlib buffer structure that is 
+        /// passed to all functions in the zlib dll
+        /// </summary>
+        internal ZStream _ztream = new ZStream();
+
+        /// <summary>
+        /// True if the object instance has been disposed, false otherwise
+        /// </summary>
+        protected bool _isDisposed = false;
+
+        /// <summary>
+        /// The size of the internal buffers
+        /// </summary>
+        protected const int kBufferSize = 16384;
+
+        private byte[] _outBuffer = new byte[kBufferSize];
+        private byte[] _inBuffer = new byte[kBufferSize];
+
+        private GCHandle _hInput;
+        private GCHandle _hOutput;
+
+        private uint _checksum = 0;
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the <c>CodeBase</c> class. 
+        /// </summary>
+		public CodecBase()
+		{
+            try
+            {
+                _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
+                _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
+            }
+            catch (Exception)
+            {
+                CleanUp(false);
+                throw;
+            }
+        }
+
+
+        #region Codec Members
+
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        public event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Fires the <see cref="DataAvailable"/> event
+        /// </summary>
+        protected void OnDataAvailable()
+        {
+            if (_ztream.total_out > 0)
+            {
+                if (DataAvailable != null)
+                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out); 
+                resetOutput();
+            }
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public void Add(byte[] data)
+        {
+            Add(data,0,data.Length);
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        public uint Checksum { get { return _checksum; } }
+
+        #endregion
+
+        #region Destructor & IDisposable stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~CodecBase()
+        {
+            CleanUp(false);
+        }
+
+        /// <summary>
+        /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
+        /// </summary>
+        public void Dispose()
+        {
+            CleanUp(true);
+        }
+
+        /// <summary>
+        /// Performs any codec specific cleanup
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        protected abstract void CleanUp();
+
+        // performs the release of the handles and calls the dereived CleanUp()
+        private void CleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                CleanUp();
+                if (_hInput.IsAllocated)
+                    _hInput.Free();
+                if (_hOutput.IsAllocated)
+                    _hOutput.Free();
+
+                _isDisposed = true;
+            }
+        }
+
+
+        #endregion
+
+        #region Helper methods
+
+        /// <summary>
+        /// Copies a number of bytes to the internal codec buffer - ready for proccesing
+        /// </summary>
+        /// <param name="data">The byte array that contains the data to copy</param>
+        /// <param name="startIndex">The index of the first byte to copy</param>
+        /// <param name="count">The number of bytes to copy from <c>data</c></param>
+        protected void copyInput(byte[] data, int startIndex, int count)
+        {
+            Array.Copy(data, startIndex, _inBuffer,0, count);
+            _ztream.next_in = _hInput.AddrOfPinnedObject();
+            _ztream.total_in = 0;
+            _ztream.avail_in = (uint)count;
+
+        }
+
+        /// <summary>
+        /// Resets the internal output buffers to a known state - ready for processing
+        /// </summary>
+        protected void resetOutput()
+        {
+            _ztream.total_out = 0;
+            _ztream.avail_out = kBufferSize;
+            _ztream.next_out = _hOutput.AddrOfPinnedObject();
+        }
+
+        /// <summary>
+        /// Updates the running checksum property
+        /// </summary>
+        /// <param name="newSum">The new checksum value</param>
+        protected void setChecksum(uint newSum)
+        {
+            _checksum = newSum;
+        }
+        #endregion
+
+    }
+}
--- a/contrib/dotzlib/DotZLib/Deflater.cs
+++ b/contrib/dotzlib/DotZLib/Deflater.cs
@@ -0,0 +1,106 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data compressor, using the deflate algorithm in the ZLib dll
+    /// </summary>
+	public sealed class Deflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Deflater</c>
+        /// </summary>
+        /// <param name="level">The compression level to use for this <c>Deflater</c></param>
+		public Deflater(CompressLevel level) : base()
+		{
+            int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize deflater");
+
+            resetOutput();
+		}
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                while (err >= 0 && _ztream.avail_in > 0)
+                {
+                    err = deflate(ref _ztream, (int)FlushTypes.None);
+                    if (err == 0)
+                        while (_ztream.avail_out == 0)
+                        {
+                            OnDataAvailable();
+                            err = deflate(ref _ztream, (int)FlushTypes.None);
+                        }
+                    inputIndex += (int)_ztream.total_in;
+                }
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do 
+            {
+                err = deflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            deflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib deflate stream
+        /// </summary>
+        protected override void CleanUp() { deflateEnd(ref _ztream); }
+
+    }
+}
--- a/contrib/dotzlib/DotZLib/DotZLib.cs
+++ b/contrib/dotzlib/DotZLib/DotZLib.cs
@@ -0,0 +1,288 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+
+    #region Internal types
+
+    /// <summary>
+    /// Defines constants for the various flush types used with zlib
+    /// </summary>
+    internal enum FlushTypes 
+    {
+        None,  Partial,  Sync,  Full,  Finish,  Block
+    }
+
+    #region ZStream structure
+    // internal mapping of the zlib zstream structure for marshalling
+    [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
+    internal struct ZStream
+    {
+        public IntPtr next_in;
+        public uint avail_in;
+        public uint total_in;
+
+        public IntPtr next_out;
+        public uint avail_out;
+        public uint total_out;
+
+        [MarshalAs(UnmanagedType.LPStr)]
+        string msg; 
+        uint state;
+
+        uint zalloc;
+        uint zfree;
+        uint opaque;
+
+        int data_type;
+        public uint adler;
+        uint reserved;
+    }
+
+    #endregion
+    
+    #endregion
+
+    #region Public enums
+    /// <summary>
+    /// Defines constants for the available compression levels in zlib
+    /// </summary>
+    public enum CompressLevel : int
+    {
+        /// <summary>
+        /// The default compression level with a reasonable compromise between compression and speed
+        /// </summary>
+        Default = -1,   
+        /// <summary>
+        /// No compression at all. The data are passed straight through.
+        /// </summary>
+        None = 0,
+        /// <summary>
+        /// The maximum compression rate available.
+        /// </summary>
+        Best = 9,   
+        /// <summary>
+        /// The fastest available compression level.
+        /// </summary>
+        Fastest = 1
+    }
+    #endregion
+
+    #region Exception classes
+    /// <summary>
+    /// The exception that is thrown when an error occurs on the zlib dll
+    /// </summary>
+    public class ZLibException : ApplicationException
+    {
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// error message and error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        /// <param name="msg">A message that (hopefully) describes the error</param>
+        public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
+        {
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
+        {
+        }
+    }
+    #endregion
+
+    #region Interfaces
+
+    /// <summary>
+    /// Declares methods and properties that enables a running checksum to be calculated 
+    /// </summary>
+    public interface ChecksumGenerator
+    {
+        /// <summary>
+        /// Gets the current value of the checksum
+        /// </summary>
+        uint Value { get; }
+
+        /// <summary>
+        /// Clears the current checksum to 0
+        /// </summary>
+        void Reset();
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        void Update(byte[] data);
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        void Update(string data);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        void Update(string data, Encoding encoding);
+    }
+
+
+    /// <summary>
+    /// Represents the method that will be called from a codec when new data
+    /// are available.
+    /// </summary>
+    /// <paramref name="data">The byte array containing the processed data</paramref>
+    /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
+    /// <paramref name="count">The number of processed bytes available</paramref>
+    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can. 
+    /// You cannot assume that startIndex will be zero.
+    /// </remarks>
+    public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
+
+    /// <summary>
+    /// Declares methods and events for implementing compressors/decompressors
+    /// </summary>
+    public interface Codec
+    {
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data);
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        uint Checksum { get; }
+
+
+    }
+
+    #endregion
+
+    #region Classes
+    /// <summary>
+    /// Encapsulates general information about the ZLib library
+    /// </summary>
+    public class Info
+    {
+        #region DLL imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint zlibCompileFlags();
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern string zlibVersion();
+        #endregion
+
+        #region Private stuff
+        private uint _flags;
+
+        // helper function that unpacks a bitsize mask
+        private static int bitSize(uint bits)
+        {
+            switch (bits)
+            {
+                case 0: return 16;
+                case 1: return 32;
+                case 2: return 64;
+            }
+            return -1;
+        }
+        #endregion
+
+        /// <summary>
+        /// Constructs an instance of the <c>Info</c> class.
+        /// </summary>
+        public Info()
+        {
+            _flags = zlibCompileFlags();
+        }
+
+        /// <summary>
+        /// True if the library is compiled with debug info
+        /// </summary>
+        public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
+
+        /// <summary>
+        /// True if the library is compiled with assembly optimizations
+        /// </summary>
+        public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned int that was compiled into Zlib
+        /// </summary>
+        public int SizeOfUInt { get { return bitSize(_flags & 3); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned long that was compiled into Zlib
+        /// </summary>
+        public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the pointers that were compiled into Zlib
+        /// </summary>
+        public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the z_off_t type that was compiled into Zlib
+        /// </summary>
+        public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
+
+        /// <summary>
+        /// Gets the version of ZLib as a string, e.g. "1.2.1"
+        /// </summary>
+        public static string Version { get { return zlibVersion(); } }
+    }
+
+    #endregion
+
+}
--- a/contrib/dotzlib/DotZLib/DotZLib.csproj
+++ b/contrib/dotzlib/DotZLib/DotZLib.csproj
@@ -0,0 +1,141 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = ""
+                AssemblyKeyContainerName = ""
+                AssemblyName = "DotZLib"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "Library"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "DotZLib"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = "1591"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+                />
+                <Reference
+                    Name = "nunit.framework"
+                    AssemblyName = "nunit.framework"
+                    HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
+                    AssemblyFolderKey = "hklm\dn\nunit.framework"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "ChecksumImpl.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CircularBuffer.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CodecBase.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Deflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "DotZLib.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "GZipStream.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Inflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "UnitTests.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+
--- a/contrib/dotzlib/DotZLib/GZipStream.cs
+++ b/contrib/dotzlib/DotZLib/GZipStream.cs
@@ -0,0 +1,301 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
+	/// </summary>
+	public class GZipStream : Stream, IDisposable
+	{
+        #region Dll Imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern IntPtr gzopen(string name, string mode);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzclose(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzwrite(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzread(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzgetc(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzputc(IntPtr gzFile, int c);
+
+        #endregion
+
+        #region Private data
+        private IntPtr _gzFile;
+        private bool _isDisposed = false;
+        private bool _isWriting;
+        #endregion
+
+        #region Constructors
+        /// <summary>
+        /// Creates a new file as a writeable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the compressed file to create</param>
+        /// <param name="level">The compression level to use when adding data</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+		public GZipStream(string fileName, CompressLevel level)
+		{
+            _isWriting = true;
+            _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+		}
+
+        /// <summary>
+        /// Opens an existing file as a readable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the file to open</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+        public GZipStream(string fileName)
+        {
+            _isWriting = false;
+            _gzFile = gzopen(fileName, "rb");
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+
+        }
+        #endregion
+
+        #region Access properties
+        /// <summary>
+        /// Returns true of this stream can be read from, false otherwise
+        /// </summary>
+        public override bool CanRead
+        {
+            get
+            {
+                return !_isWriting;
+            }
+        }
+    
+
+        /// <summary>
+        /// Returns false.
+        /// </summary>
+        public override bool CanSeek
+        {
+            get
+            {
+                return false;
+            }
+        }
+    
+        /// <summary>
+        /// Returns true if this tsream is writeable, false otherwise
+        /// </summary>
+        public override bool CanWrite
+        {
+            get
+            {
+                return _isWriting;
+            }
+        }
+        #endregion
+    
+        #region Destructor & IDispose stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~GZipStream()
+        {
+            cleanUp(false);
+        }
+
+        /// <summary>
+        /// Closes the external file handle
+        /// </summary>
+        public void Dispose()
+        {
+            cleanUp(true);
+        }
+
+        // Does the actual closing of the file handle.
+        private void cleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                gzclose(_gzFile);
+                _isDisposed = true;
+            }
+        }
+        #endregion
+    
+        #region Basic reading and writing
+        /// <summary>
+        /// Attempts to read a number of bytes from the stream.
+        /// </summary>
+        /// <param name="buffer">The destination data buffer</param>
+        /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
+        /// <param name="count">The number of bytes requested</param>
+        /// <returns>The number of bytes read</returns>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override int Read(byte[] buffer, int offset, int count)
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            int result;
+            try
+            {
+                result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+            return result;
+        }
+
+        /// <summary>
+        /// Attempts to read a single byte from the stream.
+        /// </summary>
+        /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
+        public override int ReadByte()
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+            return gzgetc(_gzFile);
+        }
+
+        /// <summary>
+        /// Writes a number of bytes to the stream
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <param name="offset"></param>
+        /// <param name="count"></param>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void Write(byte[] buffer, int offset, int count)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            try
+            {
+                int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+        }
+
+        /// <summary>
+        /// Writes a single byte to the stream
+        /// </summary>
+        /// <param name="value">The byte to add to the stream.</param>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void WriteByte(byte value)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            int result = gzputc(_gzFile, (int)value);
+            if (result < 0)
+                throw new IOException();
+        }
+        #endregion
+
+        #region Position & length stuff
+        /// <summary>
+        /// Not supported.
+        /// </summary>
+        /// <param name="value"></param>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override void SetLength(long value)
+        {
+            throw new NotSupportedException();
+        }
+    
+        /// <summary>
+        ///  Not suppported.
+        /// </summary>
+        /// <param name="offset"></param>
+        /// <param name="origin"></param>
+        /// <returns></returns>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Seek(long offset, SeekOrigin origin)
+        {
+            throw new NotSupportedException();
+        }
+    
+        /// <summary>
+        /// Flushes the <c>GZipStream</c>.
+        /// </summary>
+        /// <remarks>In this implementation, this method does nothing. This is because excessive
+        /// flushing may degrade the achievable compression rates.</remarks>
+        public override void Flush()
+        {
+            // left empty on purpose
+        }
+    
+        /// <summary>
+        /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Position
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+            set
+            {
+                throw new NotSupportedException();
+            }
+        }
+    
+        /// <summary>
+        /// Gets the size of the stream. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Length
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+        }
+        #endregion
+    }
+}
--- a/contrib/dotzlib/DotZLib/Inflater.cs
+++ b/contrib/dotzlib/DotZLib/Inflater.cs
@@ -0,0 +1,105 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+    
+    /// <summary>
+    /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
+    /// </summary>
+    public class Inflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int inflateInit_(ref ZStream sz, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Inflater</c>
+        /// </summary>
+        public Inflater() : base()
+		{
+            int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize inflater");
+
+            resetOutput();
+        }
+
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                err = inflate(ref _ztream, (int)FlushTypes.None);
+                if (err == 0)
+                    while (_ztream.avail_out == 0)
+                    {
+                        OnDataAvailable();
+                        err = inflate(ref _ztream, (int)FlushTypes.None);
+                    }
+
+                inputIndex += (int)_ztream.total_in;
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do 
+            {
+                err = inflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            inflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib inflate stream
+        /// </summary>
+        protected override void CleanUp() { inflateEnd(ref _ztream); }
+
+
+	}
+}
--- a/contrib/dotzlib/DotZLib/UnitTests.cs
+++ b/contrib/dotzlib/DotZLib/UnitTests.cs
@@ -0,0 +1,274 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Collections;
+using System.IO;
+
+// uncomment the define below to include unit tests
+//#define nunit
+#if nunit
+using NUnit.Framework;
+
+// Unit tests for the DotZLib class library
+// ----------------------------------------
+//
+// Use this with NUnit 2 from http://www.nunit.org
+//
+
+namespace DotZLibTests
+{
+    using DotZLib;
+
+    // helper methods
+    internal class Utils
+    {
+        public static bool byteArrEqual( byte[] lhs, byte[] rhs )
+        {
+            if (lhs.Length != rhs.Length)
+                return false;
+            for (int i = lhs.Length-1; i >= 0; --i)
+                if (lhs[i] != rhs[i])
+                    return false;
+            return true;
+        }
+
+    }
+
+
+    [TestFixture]
+    public class CircBufferTests
+    {
+        #region Circular buffer tests
+        [Test]
+        public void SinglePutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+
+            Assert.IsTrue(buf.Put( 1 ));
+            Assert.AreEqual( 1, buf.Size );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+        }
+
+        [Test]
+        public void BlockPutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            byte[] arr = {1,2,3,4,5,6,7,8,9,10};
+            Assert.AreEqual( 10, buf.Put(arr,0,10) );
+            Assert.AreEqual( 10, buf.Size );
+            Assert.IsFalse( buf.Put(11) );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.IsTrue( buf.Put(11) );
+
+            byte[] arr2 = (byte[])arr.Clone();
+            Assert.AreEqual( 9, buf.Get(arr2,1,9) );
+            Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
+        }
+
+        #endregion
+    }
+
+    [TestFixture]
+    public class ChecksumTests
+    {
+        #region CRC32 Tests
+        [Test]
+        public void CRC32_Null()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            Assert.AreEqual( 0, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            Assert.AreEqual( 1, crc32.Value );
+
+            crc32 = new CRC32Checksum(556);
+            Assert.AreEqual( 556, crc32.Value );
+        }
+
+        [Test]
+        public void CRC32_Data()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            byte[] data = { 1,2,3,4,5,6,7 };
+            crc32.Update(data);
+            Assert.AreEqual( 0x70e46888, crc32.Value  );
+
+            crc32 = new CRC32Checksum();
+            crc32.Update("penguin");
+            Assert.AreEqual( 0x0e5c1a120, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            crc32.Update("penguin");
+            Assert.AreEqual(0x43b6aa94, crc32.Value);
+
+        }
+        #endregion
+
+        #region Adler tests
+
+        [Test]
+        public void Adler_Null()
+        {
+            AdlerChecksum adler = new AdlerChecksum();
+            Assert.AreEqual(0, adler.Value);
+
+            adler = new AdlerChecksum(1);
+            Assert.AreEqual( 1, adler.Value );
+
+            adler = new AdlerChecksum(556);
+            Assert.AreEqual( 556, adler.Value );
+        }
+
+        [Test]
+        public void Adler_Data()
+        {
+            AdlerChecksum adler = new AdlerChecksum(1);
+            byte[] data = { 1,2,3,4,5,6,7 };
+            adler.Update(data);
+            Assert.AreEqual( 0x5b001d, adler.Value  );
+
+            adler = new AdlerChecksum();
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bcf02f6, adler.Value );
+
+            adler = new AdlerChecksum(1);
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bd602f7, adler.Value);
+
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class InfoTests
+    {
+        #region Info tests
+        [Test]
+        public void Info_Version()
+        {
+            Info info = new Info();
+            Assert.AreEqual("1.2.3", Info.Version);
+            Assert.AreEqual(32, info.SizeOfUInt);
+            Assert.AreEqual(32, info.SizeOfULong);
+            Assert.AreEqual(32, info.SizeOfPointer);
+            Assert.AreEqual(32, info.SizeOfOffset);
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class DeflateInflateTests
+    {
+        #region Deflate tests
+        [Test]
+        public void Deflate_Init()
+        {
+            using (Deflater def = new Deflater(CompressLevel.Default))
+            {
+            }
+        }
+
+        private ArrayList compressedData = new ArrayList();
+        private uint adler1;
+
+        private ArrayList uncompressedData = new ArrayList();
+        private uint adler2;
+
+        public void CDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                compressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Deflate_Compress()
+        {
+            compressedData.Clear();
+
+            byte[] testData = new byte[35000];
+            for (int i = 0; i < testData.Length; ++i)
+                testData[i] = 5;
+
+            using (Deflater def = new Deflater((CompressLevel)5))
+            {
+                def.DataAvailable += new DataAvailableHandler(CDataAvail);
+                def.Add(testData);
+                def.Finish();
+                adler1 = def.Checksum;
+            }
+        }
+        #endregion
+
+        #region Inflate tests
+        [Test]
+        public void Inflate_Init()
+        {
+            using (Inflater inf = new Inflater())
+            {
+            }
+        }
+
+        private void DDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                uncompressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Inflate_Expand()
+        { 
+            uncompressedData.Clear();
+
+            using (Inflater inf = new Inflater())
+            {
+                inf.DataAvailable += new DataAvailableHandler(DDataAvail);
+                inf.Add((byte[])compressedData.ToArray(typeof(byte)));
+                inf.Finish();
+                adler2 = inf.Checksum;
+            }
+            Assert.AreEqual( adler1, adler2 );
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class GZipStreamTests
+    {
+        #region GZipStream test
+        [Test]
+        public void GZipStream_WriteRead()
+        {
+            using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
+            {
+                BinaryWriter writer = new BinaryWriter(gzOut);
+                writer.Write("hi there");
+                writer.Write(Math.PI);
+                writer.Write(42);
+            }
+
+            using (GZipStream gzIn = new GZipStream("gzstream.gz"))
+            {
+                BinaryReader reader = new BinaryReader(gzIn);
+                string s = reader.ReadString();
+                Assert.AreEqual("hi there",s);
+                double d = reader.ReadDouble();
+                Assert.AreEqual(Math.PI, d);
+                int i = reader.ReadInt32();
+                Assert.AreEqual(42,i);
+            }
+
+        }
+        #endregion
+	}
+}
+
+#endif
--- a/contrib/dotzlib/LICENSE_1_0.txt
+++ b/contrib/dotzlib/LICENSE_1_0.txt
@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
--- a/contrib/dotzlib/readme.txt
+++ b/contrib/dotzlib/readme.txt
@@ -0,0 +1,58 @@
+This directory contains a .Net wrapper class library for the ZLib1.dll
+
+The wrapper includes support for inflating/deflating memory buffers, 
+.Net streaming wrappers for the gz streams part of zlib, and wrappers
+for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
+
+Directory structure:
+--------------------
+
+LICENSE_1_0.txt       - License file.
+readme.txt            - This file.
+DotZLib.chm           - Class library documentation
+DotZLib.build         - NAnt build file
+DotZLib.sln           - Microsoft Visual Studio 2003 solution file
+
+DotZLib\*.cs          - Source files for the class library
+
+Unit tests:
+-----------
+The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher.
+To include unit tests in the build, define nunit before building.
+
+
+Build instructions:
+-------------------
+
+1. Using Visual Studio.Net 2003:
+   Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
+   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on 
+   you are building the release or debug version of the library. Check 
+   DotZLib/UnitTests.cs for instructions on how to include unit tests in the
+   build.
+   
+2. Using NAnt:
+   Open a command prompt with access to the build environment and run nant
+   in the same directory as the DotZLib.build file.
+   You can define 2 properties on the nant command-line to control the build:
+   debug={true|false} to toggle between release/debug builds (default=true).
+   nunit={true|false} to include or esclude unit tests (default=true).
+   Also the target clean will remove binaries.
+   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release 
+   or ./DotZLib/bin/debug, depending on whether you are building the release 
+   or debug version of the library.
+
+   Examples: 
+     nant -D:debug=false -D:nunit=false
+       will build a release mode version of the library without unit tests.
+     nant
+       will build a debug version of the library with unit tests 
+     nant clean
+       will remove all previously built files.
+
+
+---------------------------------
+Copyright (c) Henrik Ravn 2004
+
+Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
--- a/contrib/infback9/infback9.c
+++ b/contrib/infback9/infback9.c
@@ -1,5 +1,5 @@
 /* infback9.c -- inflate deflate64 data using a call-back interface
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2008 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -242,7 +242,7 @@ void FAR *out_desc;
    code const FAR *distcode;   /* starting table for distance codes */
    unsigned lenbits;           /* index bits for lencode */
    unsigned distbits;          /* index bits for distcode */
-    code this;                  /* current decoding table entry */
+    code here;                  /* current decoding table entry */
    code last;                  /* parent table entry */
    unsigned len;               /* length to copy for repeats, bits to drop */
    int ret;                    /* return code */
@@ -384,19 +384,19 @@ void FAR *out_desc;
            state->have = 0;
            while (state->have < state->nlen + state->ndist) {
                for (;;) {
-                    this = lencode[BITS(lenbits)];
-                    if ((unsigned)(this.bits) <= bits) break;
+                    here = lencode[BITS(lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
                    PULLBYTE();
                }
-                if (this.val < 16) {
-                    NEEDBITS(this.bits);
-                    DROPBITS(this.bits);
-                    state->lens[state->have++] = this.val;
+                if (here.val < 16) {
+                    NEEDBITS(here.bits);
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
                }
                else {
-                    if (this.val == 16) {
-                        NEEDBITS(this.bits + 2);
-                        DROPBITS(this.bits);
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
                        if (state->have == 0) {
                            strm->msg = (char *)"invalid bit length repeat";
                            mode = BAD;
@@ -406,16 +406,16 @@ void FAR *out_desc;
                        copy = 3 + BITS(2);
                        DROPBITS(2);
                    }
-                    else if (this.val == 17) {
-                        NEEDBITS(this.bits + 3);
-                        DROPBITS(this.bits);
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
                        len = 0;
                        copy = 3 + BITS(3);
                        DROPBITS(3);
                    }
                    else {
-                        NEEDBITS(this.bits + 7);
-                        DROPBITS(this.bits);
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
                        len = 0;
                        copy = 11 + BITS(7);
                        DROPBITS(7);
@@ -430,10 +430,19 @@ void FAR *out_desc;
                }
            }

-	    /* handle error breaks in while */
-	    if (mode == BAD) break;
+            /* handle error breaks in while */
+            if (mode == BAD) break;

-            /* build code tables */
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftree9.h
+               concerning the ENOUGH constants, which depend on those values */
            state->next = state->codes;
            lencode = (code const FAR *)(state->next);
            lenbits = 9;
@@ -460,28 +469,28 @@ void FAR *out_desc;
        case LEN:
            /* get a literal, length, or end-of-block code */
            for (;;) {
-                this = lencode[BITS(lenbits)];
-                if ((unsigned)(this.bits) <= bits) break;
+                here = lencode[BITS(lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
                PULLBYTE();
            }
-            if (this.op && (this.op & 0xf0) == 0) {
-                last = this;
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
                for (;;) {
-                    this = lencode[last.val +
+                    here = lencode[last.val +
                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + this.bits) <= bits) break;
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
                    PULLBYTE();
                }
                DROPBITS(last.bits);
            }
-            DROPBITS(this.bits);
-            length = (unsigned)this.val;
+            DROPBITS(here.bits);
+            length = (unsigned)here.val;

            /* process literal */
-            if (this.op == 0) {
-                Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+            if (here.op == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
                        "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", this.val));
+                        "inflate:         literal 0x%02x\n", here.val));
                ROOM();
                *put++ = (unsigned char)(length);
                left--;
@@ -490,21 +499,21 @@ void FAR *out_desc;
            }

            /* process end of block */
-            if (this.op & 32) {
+            if (here.op & 32) {
                Tracevv((stderr, "inflate:         end of block\n"));
                mode = TYPE;
                break;
            }

            /* invalid code */
-            if (this.op & 64) {
+            if (here.op & 64) {
                strm->msg = (char *)"invalid literal/length code";
                mode = BAD;
                break;
            }

            /* length code -- get extra bits, if any */
-            extra = (unsigned)(this.op) & 31;
+            extra = (unsigned)(here.op) & 31;
            if (extra != 0) {
                NEEDBITS(extra);
                length += BITS(extra);
@@ -514,30 +523,30 @@ void FAR *out_desc;

            /* get distance code */
            for (;;) {
-                this = distcode[BITS(distbits)];
-                if ((unsigned)(this.bits) <= bits) break;
+                here = distcode[BITS(distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
                PULLBYTE();
            }
-            if ((this.op & 0xf0) == 0) {
-                last = this;
+            if ((here.op & 0xf0) == 0) {
+                last = here;
                for (;;) {
-                    this = distcode[last.val +
+                    here = distcode[last.val +
                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + this.bits) <= bits) break;
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
                    PULLBYTE();
                }
                DROPBITS(last.bits);
            }
-            DROPBITS(this.bits);
-            if (this.op & 64) {
+            DROPBITS(here.bits);
+            if (here.op & 64) {
                strm->msg = (char *)"invalid distance code";
                mode = BAD;
                break;
            }
-            offset = (unsigned)this.val;
+            offset = (unsigned)here.val;

            /* get distance extra bits, if any */
-            extra = (unsigned)(this.op) & 15;
+            extra = (unsigned)(here.op) & 15;
            if (extra != 0) {
                NEEDBITS(extra);
                offset += BITS(extra);
--- a/contrib/infback9/infback9.h
+++ b/contrib/infback9/infback9.h
@@ -16,6 +16,10 @@
 * zlib.h must be included before this header file.
 */

+#ifdef __cplusplus
+extern "C" {
+#endif
+
 ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
                                    in_func in, void FAR *in_desc,
                                    out_func out, void FAR *out_desc));
@@ -27,3 +31,7 @@ ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
 #define inflateBack9Init(strm, window) \
        inflateBack9Init_((strm), (window), \
        ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef __cplusplus
+}
+#endif
--- a/contrib/infback9/inftree9.c
+++ b/contrib/infback9/inftree9.c
@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2008 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -9,7 +9,7 @@
 #define MAXBITS 15

 const char inflate9_copyright[] =
-   " inflate9 1.2.1.2 Copyright 1995-2004 Mark Adler ";
+   " inflate9 1.2.3.5 Copyright 1995-2009 Mark Adler ";
 /*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
        128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
        130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 77, 194};
+        133, 133, 133, 133, 144, 69, 199};
    static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
        65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
@@ -128,7 +128,7 @@ unsigned short FAR *work;
        left -= count[len];
        if (left < 0) return -1;        /* over-subscribed */
    }
-    if (left > 0 && (type == CODES || (codes - count[0] != 1)))
+    if (left > 0 && (type == CODES || max != 1))
        return -1;                      /* incomplete set */

    /* generate offsets into symbol table for each length for sorting */
@@ -160,11 +160,10 @@ unsigned short FAR *work;
       entered in the tables.

       used keeps track of how many table entries have been allocated from the
-       provided *table space.  It is checked when a LENS table is being made
-       against the space in *table, ENOUGH, minus the maximum space needed by
-       the worst case distance code, MAXD.  This should never happen, but the
-       sufficiency of ENOUGH has not been proven exhaustively, hence the check.
-       This assumes that when type == LENS, bits == 9.
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftree9.h
+       for more information.

       sym increments through all symbols, and the loop terminates when
       all codes of length max, i.e. all codes, have been processed.  This
@@ -203,7 +202,8 @@ unsigned short FAR *work;
    mask = used - 1;            /* mask for comparing low */

    /* check available table space */
-    if (type == LENS && used >= ENOUGH - MAXD)
+    if ((type == LENS && used >= ENOUGH_LENS) ||
+        (type == DISTS && used >= ENOUGH_DISTS))
        return 1;

    /* process all codes and make table entries */
@@ -270,7 +270,8 @@ unsigned short FAR *work;

            /* check for enough space */
            used += 1U << curr;
-            if (type == LENS && used >= ENOUGH - MAXD)
+            if ((type == LENS && used >= ENOUGH_LENS) ||
+                (type == DISTS && used >= ENOUGH_DISTS))
                return 1;

            /* point entry in root table to sub-table */
--- a/contrib/infback9/inftree9.h
+++ b/contrib/infback9/inftree9.h
@@ -1,5 +1,5 @@
 /* inftree9.h -- header to use inftree9.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2008 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -35,15 +35,21 @@ typedef struct {
    01000000 - invalid code
 */

-/* Maximum size of dynamic tree.  The maximum found in a long but non-
-   exhaustive search was 1004 code structures (850 for length/literals
-   and 154 for distances, the latter actually the result of an
-   exhaustive search).  The true maximum is not known, but the value
-   below is more than safe. */
-#define ENOUGH 1440
-#define MAXD 154
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1446, which is the sum of 852 for literal/length codes and 594 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 32 6 15" for distance codes returns 594.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in infback9.c.  If the root table size is changed,
+   then these maximum sizes would be need to be recalculated and updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 594
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)

-/* Type of code to build for inftable() */
+/* Type of code to build for inflate_table9() */
 typedef enum {
    CODES,
    LENS,
--- a/contrib/inflate86/inffas86.c
+++ b/contrib/inflate86/inffas86.c
--- a/contrib/inflate86/inffast.S
+++ b/contrib/inflate86/inffast.S
@@ -188,17 +188,8 @@
 /*
 * typedef enum inflate_mode consts, in inflate.h
 */
-#ifndef NO_GUNZIP
-#define GUNZIP
-#endif
-
-#ifdef GUNZIP
 #define INFLATE_MODE_TYPE 11  /* state->mode flags enum-ed in inflate.h */
 #define INFLATE_MODE_BAD  26
-#else
-#define INFLATE_MODE_TYPE 3
-#define INFLATE_MODE_BAD  17
-#endif


 #if ! defined( USE_MMX ) && ! defined( NO_MMX )
--- a/contrib/masm686/match.asm
+++ b/contrib/masm686/match.asm
@@ -1,408 +1,413 @@
-
-; match.asm -- Pentium-Pro optimized version of longest_match()
-;
-; Updated for zlib 1.1.3 and converted to MASM 6.1x
-; Copyright (C) 2000 Dan Higdon <hdan@kinesoft.com>
-;                    and Chuck Walbourn <chuckw@kinesoft.com>
-; Corrections by Cosmin Truta <cosmint@cs.ubbcluj.ro>
-;
-; This is free software; you can redistribute it and/or modify it
-; under the terms of the GNU General Public License.
-
-; Based on match.S
-; Written for zlib 1.1.2
-; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
-
-	.686P
-	.MODEL	FLAT
-
-;===========================================================================
-; EQUATES
-;===========================================================================
-
-MAX_MATCH	EQU 258
-MIN_MATCH	EQU 3
-MIN_LOOKAHEAD	EQU (MAX_MATCH + MIN_MATCH + 1)
-MAX_MATCH_8	EQU ((MAX_MATCH + 7) AND (NOT 7))
-
-;===========================================================================
-; STRUCTURES
-;===========================================================================
-
-; This STRUCT assumes a 4-byte alignment
-
-DEFLATE_STATE	STRUCT
-ds_strm			dd ?
-ds_status		dd ?
-ds_pending_buf		dd ?
-ds_pending_buf_size	dd ?
-ds_pending_out		dd ?
-ds_pending		dd ?
-ds_wrap			dd ?
-ds_data_type		db ?
-ds_method		db ?
-			db ?	; padding
-			db ?	; padding
-ds_last_flush		dd ?
-ds_w_size		dd ?	; used
-ds_w_bits		dd ?
-ds_w_mask		dd ?	; used
-ds_window		dd ?	; used
-ds_window_size		dd ?
-ds_prev			dd ?	; used
-ds_head			dd ?
-ds_ins_h		dd ?
-ds_hash_size		dd ?
-ds_hash_bits		dd ?
-ds_hash_mask		dd ?
-ds_hash_shift		dd ?
-ds_block_start		dd ?
-ds_match_length		dd ?	; used
-ds_prev_match		dd ?	; used
-ds_match_available	dd ?
-ds_strstart		dd ?	; used
-ds_match_start		dd ?	; used
-ds_lookahead		dd ?	; used
-ds_prev_length		dd ?	; used
-ds_max_chain_length	dd ?	; used
-ds_max_laxy_match	dd ?
-ds_level		dd ?
-ds_strategy		dd ?
-ds_good_match		dd ?	; used
-ds_nice_match		dd ?	; used
-
-; Don't need anymore of the struct for match
-DEFLATE_STATE	ENDS
-
-;===========================================================================
-; CODE
-;===========================================================================
-_TEXT	SEGMENT
-
-;---------------------------------------------------------------------------
-; match_init
-;---------------------------------------------------------------------------
-	ALIGN	4
-PUBLIC	_match_init
-_match_init	PROC
-	; no initialization needed
-	ret
-_match_init	ENDP
-
-;---------------------------------------------------------------------------
-; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
-;---------------------------------------------------------------------------
-	ALIGN	4
-
-PUBLIC	_longest_match
-_longest_match	PROC
-
-; Since this code uses EBP for a scratch register, the stack frame must
-; be manually constructed and referenced relative to the ESP register.
-
-; Stack image
-; Variables
-chainlenwmask	=  0	; high word: current chain len
-			; low word: s->wmask
-window		=  4	; local copy of s->window
-windowbestlen	=  8	; s->window + bestlen
-scanend		= 12	; last two bytes of string
-scanstart	= 16	; first two bytes of string
-scanalign	= 20	; dword-misalignment of string
-nicematch	= 24	; a good enough match size
-bestlen		= 28	; size of best match so far
-scan		= 32	; ptr to string wanting match
-varsize		= 36	; number of bytes (also offset to last saved register)
-
-; Saved Registers (actually pushed into place)
-ebx_save	= 36
-edi_save	= 40
-esi_save	= 44
-ebp_save	= 48
-
-; Parameters
-retaddr		= 52
-deflatestate	= 56
-curmatch	= 60
-
-; Save registers that the compiler may be using
-	push	ebp
-	push	edi
-	push	esi
-	push	ebx
-
-; Allocate local variable space
-	sub	esp,varsize
-
-; Retrieve the function arguments. ecx will hold cur_match
-; throughout the entire function. edx will hold the pointer to the
-; deflate_state structure during the function's setup (before
-; entering the main loop).
-
-	mov	edx, [esp+deflatestate]
-ASSUME	edx:PTR DEFLATE_STATE
-
-	mov	ecx, [esp+curmatch]
-
-; uInt wmask = s->w_mask;
-; unsigned chain_length = s->max_chain_length;
-; if (s->prev_length >= s->good_match) {
-;     chain_length >>= 2;
-; }
-
-	mov	eax, [edx].ds_prev_length
-	mov	ebx, [edx].ds_good_match
-	cmp	eax, ebx
-	mov	eax, [edx].ds_w_mask
-	mov	ebx, [edx].ds_max_chain_length
-	jl	SHORT LastMatchGood
-	shr	ebx, 2
-LastMatchGood:
-
-; chainlen is decremented once beforehand so that the function can
-; use the sign flag instead of the zero flag for the exit test.
-; It is then shifted into the high word, to make room for the wmask
-; value, which it will always accompany.
-
-	dec	ebx
-	shl	ebx, 16
-	or	ebx, eax
-	mov	[esp+chainlenwmask], ebx
-
-; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-	mov	eax, [edx].ds_nice_match
-	mov	ebx, [edx].ds_lookahead
-	cmp	ebx, eax
-	jl	SHORT LookaheadLess
-	mov	ebx, eax
-LookaheadLess:
-	mov	[esp+nicematch], ebx
-
-;/* register Bytef *scan = s->window + s->strstart;                     */
-
-	mov	esi, [edx].ds_window
-	mov	[esp+window], esi
-	mov	ebp, [edx].ds_strstart
-	lea	edi, [esi+ebp]
-	mov	[esp+scan],edi
-
-;/* Determine how many bytes the scan ptr is off from being             */
-;/* dword-aligned.                                                      */
-
-	mov	eax, edi
-	neg	eax
-	and	eax, 3
-	mov	[esp+scanalign], eax
-
-;/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?                      */
-;/*     s->strstart - (IPos)MAX_DIST(s) : NIL;                          */
-
-	mov	eax, [edx].ds_w_size
-	sub	eax, MIN_LOOKAHEAD
-	sub	ebp, eax
-	jg	SHORT LimitPositive
-	xor	ebp, ebp
-LimitPositive:
-
-;/* int best_len = s->prev_length;                                      */
-
-	mov	eax, [edx].ds_prev_length
-	mov	[esp+bestlen], eax
-
-;/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
-
-	add	esi, eax
-	mov	[esp+windowbestlen], esi
-
-;/* register ush scan_start = *(ushf*)scan;                             */
-;/* register ush scan_end   = *(ushf*)(scan+best_len-1);                */
-;/* Posf *prev = s->prev;                                               */
-
-	movzx	ebx, WORD PTR[edi]
-	mov	[esp+scanstart], ebx
-	movzx	ebx, WORD PTR[eax+edi-1]
-	mov	[esp+scanend], ebx
-	mov	edi, [edx].ds_prev
-
-;/* Jump into the main loop.                                            */
-
-	mov	edx, [esp+chainlenwmask]
-	jmp	SHORT LoopEntry
-
-;/* do {
-; *     match = s->window + cur_match;
-; *     if (*(ushf*)(match+best_len-1) != scan_end ||
-; *         *(ushf*)match != scan_start) continue;
-; *     [...]
-; * } while ((cur_match = prev[cur_match & wmask]) > limit
-; *          && --chain_length != 0);
-; *
-; * Here is the inner loop of the function. The function will spend the
-; * majority of its time in this loop, and majority of that time will
-; * be spent in the first ten instructions.
-; *
-; * Within this loop:
-; * %ebx = scanend
-; * %ecx = curmatch
-; * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
-; * %esi = windowbestlen - i.e., (window + bestlen)
-; * %edi = prev
-; * %ebp = limit
-; */
-
-	ALIGN	4
-LookupLoop:
-	and	ecx, edx
-	movzx	ecx, WORD PTR[edi+ecx*2]
-	cmp	ecx, ebp
-	jbe	LeaveNow
-	sub	edx, 000010000H
-	js	LeaveNow
-
-LoopEntry:
-	movzx	eax, WORD PTR[esi+ecx-1]
-	cmp	eax, ebx
-	jnz	SHORT LookupLoop
-
-	mov	eax, [esp+window]
-	movzx	eax, WORD PTR[eax+ecx]
-	cmp	eax, [esp+scanstart]
-	jnz	SHORT LookupLoop
-
-;/* Store the current value of chainlen.                                */
-
-	mov	[esp+chainlenwmask], edx
-
-;/* Point %edi to the string under scrutiny, and %esi to the string we  */
-;/* are hoping to match it up with. In actuality, %esi and %edi are     */
-;/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is     */
-;/* initialized to -(MAX_MATCH_8 - scanalign).                          */
-
-	mov	esi, [esp+window]
-	mov	edi, [esp+scan]
-	add	esi, ecx
-	mov	eax, [esp+scanalign]
-	mov	edx, -MAX_MATCH_8
-	lea	edi, [edi+eax+MAX_MATCH_8]
-	lea	esi, [esi+eax+MAX_MATCH_8]
-
-;/* Test the strings for equality, 8 bytes at a time. At the end,
-; * adjust %edx so that it is offset to the exact byte that mismatched.
-; *
-; * We already know at this point that the first three bytes of the
-; * strings match each other, and they can be safely passed over before
-; * starting the compare loop. So what this code does is skip over 0-3
-; * bytes, as much as necessary in order to dword-align the %edi
-; * pointer. (%esi will still be misaligned three times out of four.)
-; *
-; * It should be confessed that this loop usually does not represent
-; * much of the total running time. Replacing it with a more
-; * straightforward "rep cmpsb" would not drastically degrade
-; * performance.
-; */
-
-LoopCmps:
-	mov	eax, DWORD PTR[esi+edx]
-	xor	eax, DWORD PTR[edi+edx]
-	jnz	SHORT LeaveLoopCmps
-
-	mov	eax, DWORD PTR[esi+edx+4]
-	xor	eax, DWORD PTR[edi+edx+4]
-	jnz	SHORT LeaveLoopCmps4
-
-	add	edx, 8
-	jnz	SHORT LoopCmps
-	jmp	LenMaximum
-	ALIGN	4
-
-LeaveLoopCmps4:
-	add	edx, 4
-
-LeaveLoopCmps:
-	test	eax, 00000FFFFH
-	jnz	SHORT LenLower
-
-	add	edx, 2
-	shr	eax, 16
-
-LenLower:
-	sub	al, 1
-	adc	edx, 0
-
-;/* Calculate the length of the match. If it is longer than MAX_MATCH,  */
-;/* then automatically accept it as the best possible match and leave.  */
-
-	lea	eax, [edi+edx]
-	mov	edi, [esp+scan]
-	sub	eax, edi
-	cmp	eax, MAX_MATCH
-	jge	SHORT LenMaximum
-
-;/* If the length of the match is not longer than the best match we     */
-;/* have so far, then forget it and return to the lookup loop.          */
-
-	mov	edx, [esp+deflatestate]
-	mov	ebx, [esp+bestlen]
-	cmp	eax, ebx
-	jg	SHORT LongerMatch
-	mov	esi, [esp+windowbestlen]
-	mov	edi, [edx].ds_prev
-	mov	ebx, [esp+scanend]
-	mov	edx, [esp+chainlenwmask]
-	jmp	LookupLoop
-	ALIGN	4
-
-;/*         s->match_start = cur_match;                                 */
-;/*         best_len = len;                                             */
-;/*         if (len >= nice_match) break;                               */
-;/*         scan_end = *(ushf*)(scan+best_len-1);                       */
-
-LongerMatch:
-	mov	ebx, [esp+nicematch]
-	mov	[esp+bestlen], eax
-	mov	[edx].ds_match_start, ecx
-	cmp	eax, ebx
-	jge	SHORT LeaveNow
-	mov	esi, [esp+window]
-	add	esi, eax
-	mov	[esp+windowbestlen], esi
-	movzx	ebx, WORD PTR[edi+eax-1]
-	mov	edi, [edx].ds_prev
-	mov	[esp+scanend], ebx
-	mov	edx, [esp+chainlenwmask]
-	jmp	LookupLoop
-	ALIGN	4
-
-;/* Accept the current string, with the maximum possible length.        */
-
-LenMaximum:
-	mov	edx, [esp+deflatestate]
-	mov	DWORD PTR[esp+bestlen], MAX_MATCH
-	mov	[edx].ds_match_start, ecx
-
-;/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;          */
-;/* return s->lookahead;                                                */
-
-LeaveNow:
-	mov	edx, [esp+deflatestate]
-	mov	ebx, [esp+bestlen]
-	mov	eax, [edx].ds_lookahead
-	cmp	ebx, eax
-	jg	SHORT LookaheadRet
-	mov	eax, ebx
-LookaheadRet:
-
-; Restore the stack and return from whence we came.
-
-	add	esp, varsize
-	pop	ebx
-	pop	esi
-	pop	edi
-	pop	ebp
-	ret
-
-_longest_match	ENDP
-
-_TEXT	ENDS
-END
+
+; match.asm -- Pentium-Pro optimized version of longest_match()
+;
+; Updated for zlib 1.1.3 and converted to MASM 6.1x
+; Copyright (C) 2000 Dan Higdon <hdan@kinesoft.com>
+;                    and Chuck Walbourn <chuckw@kinesoft.com>
+; Corrections by Cosmin Truta <cosmint@cs.ubbcluj.ro>
+;
+; This is free software; you can redistribute it and/or modify it
+; under the terms of the GNU General Public License.
+
+; Based on match.S
+; Written for zlib 1.1.2
+; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;
+; Modified by Gilles Vollant (2005) for add gzhead and gzindex
+
+	.686P
+	.MODEL	FLAT
+
+;===========================================================================
+; EQUATES
+;===========================================================================
+
+MAX_MATCH	EQU 258
+MIN_MATCH	EQU 3
+MIN_LOOKAHEAD	EQU (MAX_MATCH + MIN_MATCH + 1)
+MAX_MATCH_8	EQU ((MAX_MATCH + 7) AND (NOT 7))
+
+;===========================================================================
+; STRUCTURES
+;===========================================================================
+
+; This STRUCT assumes a 4-byte alignment
+
+DEFLATE_STATE	STRUCT
+ds_strm			dd ?
+ds_status		dd ?
+ds_pending_buf		dd ?
+ds_pending_buf_size	dd ?
+ds_pending_out		dd ?
+ds_pending		dd ?
+ds_wrap			dd ?
+; gzhead and gzindex are added in zlib 1.2.2.2 (see deflate.h)
+ds_gzhead               dd ?
+ds_gzindex              dd ?
+ds_data_type		db ?
+ds_method		db ?
+			db ?	; padding
+			db ?	; padding
+ds_last_flush		dd ?
+ds_w_size		dd ?	; used
+ds_w_bits		dd ?
+ds_w_mask		dd ?	; used
+ds_window		dd ?	; used
+ds_window_size		dd ?
+ds_prev			dd ?	; used
+ds_head			dd ?
+ds_ins_h		dd ?
+ds_hash_size		dd ?
+ds_hash_bits		dd ?
+ds_hash_mask		dd ?
+ds_hash_shift		dd ?
+ds_block_start		dd ?
+ds_match_length		dd ?	; used
+ds_prev_match		dd ?	; used
+ds_match_available	dd ?
+ds_strstart		dd ?	; used
+ds_match_start		dd ?	; used
+ds_lookahead		dd ?	; used
+ds_prev_length		dd ?	; used
+ds_max_chain_length	dd ?	; used
+ds_max_laxy_match	dd ?
+ds_level		dd ?
+ds_strategy		dd ?
+ds_good_match		dd ?	; used
+ds_nice_match		dd ?	; used
+
+; Don't need anymore of the struct for match
+DEFLATE_STATE	ENDS
+
+;===========================================================================
+; CODE
+;===========================================================================
+_TEXT	SEGMENT
+
+;---------------------------------------------------------------------------
+; match_init
+;---------------------------------------------------------------------------
+	ALIGN	4
+PUBLIC	_match_init
+_match_init	PROC
+	; no initialization needed
+	ret
+_match_init	ENDP
+
+;---------------------------------------------------------------------------
+; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
+;---------------------------------------------------------------------------
+	ALIGN	4
+
+PUBLIC	_longest_match
+_longest_match	PROC
+
+; Since this code uses EBP for a scratch register, the stack frame must
+; be manually constructed and referenced relative to the ESP register.
+
+; Stack image
+; Variables
+chainlenwmask	=  0	; high word: current chain len
+			; low word: s->wmask
+window		=  4	; local copy of s->window
+windowbestlen	=  8	; s->window + bestlen
+scanend		= 12	; last two bytes of string
+scanstart	= 16	; first two bytes of string
+scanalign	= 20	; dword-misalignment of string
+nicematch	= 24	; a good enough match size
+bestlen		= 28	; size of best match so far
+scan		= 32	; ptr to string wanting match
+varsize		= 36	; number of bytes (also offset to last saved register)
+
+; Saved Registers (actually pushed into place)
+ebx_save	= 36
+edi_save	= 40
+esi_save	= 44
+ebp_save	= 48
+
+; Parameters
+retaddr		= 52
+deflatestate	= 56
+curmatch	= 60
+
+; Save registers that the compiler may be using
+	push	ebp
+	push	edi
+	push	esi
+	push	ebx
+
+; Allocate local variable space
+	sub	esp,varsize
+
+; Retrieve the function arguments. ecx will hold cur_match
+; throughout the entire function. edx will hold the pointer to the
+; deflate_state structure during the function's setup (before
+; entering the main loop).
+
+	mov	edx, [esp+deflatestate]
+ASSUME	edx:PTR DEFLATE_STATE
+
+	mov	ecx, [esp+curmatch]
+
+; uInt wmask = s->w_mask;
+; unsigned chain_length = s->max_chain_length;
+; if (s->prev_length >= s->good_match) {
+;     chain_length >>= 2;
+; }
+
+	mov	eax, [edx].ds_prev_length
+	mov	ebx, [edx].ds_good_match
+	cmp	eax, ebx
+	mov	eax, [edx].ds_w_mask
+	mov	ebx, [edx].ds_max_chain_length
+	jl	SHORT LastMatchGood
+	shr	ebx, 2
+LastMatchGood:
+
+; chainlen is decremented once beforehand so that the function can
+; use the sign flag instead of the zero flag for the exit test.
+; It is then shifted into the high word, to make room for the wmask
+; value, which it will always accompany.
+
+	dec	ebx
+	shl	ebx, 16
+	or	ebx, eax
+	mov	[esp+chainlenwmask], ebx
+
+; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+	mov	eax, [edx].ds_nice_match
+	mov	ebx, [edx].ds_lookahead
+	cmp	ebx, eax
+	jl	SHORT LookaheadLess
+	mov	ebx, eax
+LookaheadLess:
+	mov	[esp+nicematch], ebx
+
+;/* register Bytef *scan = s->window + s->strstart;                     */
+
+	mov	esi, [edx].ds_window
+	mov	[esp+window], esi
+	mov	ebp, [edx].ds_strstart
+	lea	edi, [esi+ebp]
+	mov	[esp+scan],edi
+
+;/* Determine how many bytes the scan ptr is off from being             */
+;/* dword-aligned.                                                      */
+
+	mov	eax, edi
+	neg	eax
+	and	eax, 3
+	mov	[esp+scanalign], eax
+
+;/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?                      */
+;/*     s->strstart - (IPos)MAX_DIST(s) : NIL;                          */
+
+	mov	eax, [edx].ds_w_size
+	sub	eax, MIN_LOOKAHEAD
+	sub	ebp, eax
+	jg	SHORT LimitPositive
+	xor	ebp, ebp
+LimitPositive:
+
+;/* int best_len = s->prev_length;                                      */
+
+	mov	eax, [edx].ds_prev_length
+	mov	[esp+bestlen], eax
+
+;/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
+
+	add	esi, eax
+	mov	[esp+windowbestlen], esi
+
+;/* register ush scan_start = *(ushf*)scan;                             */
+;/* register ush scan_end   = *(ushf*)(scan+best_len-1);                */
+;/* Posf *prev = s->prev;                                               */
+
+	movzx	ebx, WORD PTR[edi]
+	mov	[esp+scanstart], ebx
+	movzx	ebx, WORD PTR[eax+edi-1]
+	mov	[esp+scanend], ebx
+	mov	edi, [edx].ds_prev
+
+;/* Jump into the main loop.                                            */
+
+	mov	edx, [esp+chainlenwmask]
+	jmp	SHORT LoopEntry
+
+;/* do {
+; *     match = s->window + cur_match;
+; *     if (*(ushf*)(match+best_len-1) != scan_end ||
+; *         *(ushf*)match != scan_start) continue;
+; *     [...]
+; * } while ((cur_match = prev[cur_match & wmask]) > limit
+; *          && --chain_length != 0);
+; *
+; * Here is the inner loop of the function. The function will spend the
+; * majority of its time in this loop, and majority of that time will
+; * be spent in the first ten instructions.
+; *
+; * Within this loop:
+; * %ebx = scanend
+; * %ecx = curmatch
+; * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+; * %esi = windowbestlen - i.e., (window + bestlen)
+; * %edi = prev
+; * %ebp = limit
+; */
+
+	ALIGN	4
+LookupLoop:
+	and	ecx, edx
+	movzx	ecx, WORD PTR[edi+ecx*2]
+	cmp	ecx, ebp
+	jbe	LeaveNow
+	sub	edx, 000010000H
+	js	LeaveNow
+
+LoopEntry:
+	movzx	eax, WORD PTR[esi+ecx-1]
+	cmp	eax, ebx
+	jnz	SHORT LookupLoop
+
+	mov	eax, [esp+window]
+	movzx	eax, WORD PTR[eax+ecx]
+	cmp	eax, [esp+scanstart]
+	jnz	SHORT LookupLoop
+
+;/* Store the current value of chainlen.                                */
+
+	mov	[esp+chainlenwmask], edx
+
+;/* Point %edi to the string under scrutiny, and %esi to the string we  */
+;/* are hoping to match it up with. In actuality, %esi and %edi are     */
+;/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is     */
+;/* initialized to -(MAX_MATCH_8 - scanalign).                          */
+
+	mov	esi, [esp+window]
+	mov	edi, [esp+scan]
+	add	esi, ecx
+	mov	eax, [esp+scanalign]
+	mov	edx, -MAX_MATCH_8
+	lea	edi, [edi+eax+MAX_MATCH_8]
+	lea	esi, [esi+eax+MAX_MATCH_8]
+
+;/* Test the strings for equality, 8 bytes at a time. At the end,
+; * adjust %edx so that it is offset to the exact byte that mismatched.
+; *
+; * We already know at this point that the first three bytes of the
+; * strings match each other, and they can be safely passed over before
+; * starting the compare loop. So what this code does is skip over 0-3
+; * bytes, as much as necessary in order to dword-align the %edi
+; * pointer. (%esi will still be misaligned three times out of four.)
+; *
+; * It should be confessed that this loop usually does not represent
+; * much of the total running time. Replacing it with a more
+; * straightforward "rep cmpsb" would not drastically degrade
+; * performance.
+; */
+
+LoopCmps:
+	mov	eax, DWORD PTR[esi+edx]
+	xor	eax, DWORD PTR[edi+edx]
+	jnz	SHORT LeaveLoopCmps
+
+	mov	eax, DWORD PTR[esi+edx+4]
+	xor	eax, DWORD PTR[edi+edx+4]
+	jnz	SHORT LeaveLoopCmps4
+
+	add	edx, 8
+	jnz	SHORT LoopCmps
+	jmp	LenMaximum
+	ALIGN	4
+
+LeaveLoopCmps4:
+	add	edx, 4
+
+LeaveLoopCmps:
+	test	eax, 00000FFFFH
+	jnz	SHORT LenLower
+
+	add	edx, 2
+	shr	eax, 16
+
+LenLower:
+	sub	al, 1
+	adc	edx, 0
+
+;/* Calculate the length of the match. If it is longer than MAX_MATCH,  */
+;/* then automatically accept it as the best possible match and leave.  */
+
+	lea	eax, [edi+edx]
+	mov	edi, [esp+scan]
+	sub	eax, edi
+	cmp	eax, MAX_MATCH
+	jge	SHORT LenMaximum
+
+;/* If the length of the match is not longer than the best match we     */
+;/* have so far, then forget it and return to the lookup loop.          */
+
+	mov	edx, [esp+deflatestate]
+	mov	ebx, [esp+bestlen]
+	cmp	eax, ebx
+	jg	SHORT LongerMatch
+	mov	esi, [esp+windowbestlen]
+	mov	edi, [edx].ds_prev
+	mov	ebx, [esp+scanend]
+	mov	edx, [esp+chainlenwmask]
+	jmp	LookupLoop
+	ALIGN	4
+
+;/*         s->match_start = cur_match;                                 */
+;/*         best_len = len;                                             */
+;/*         if (len >= nice_match) break;                               */
+;/*         scan_end = *(ushf*)(scan+best_len-1);                       */
+
+LongerMatch:
+	mov	ebx, [esp+nicematch]
+	mov	[esp+bestlen], eax
+	mov	[edx].ds_match_start, ecx
+	cmp	eax, ebx
+	jge	SHORT LeaveNow
+	mov	esi, [esp+window]
+	add	esi, eax
+	mov	[esp+windowbestlen], esi
+	movzx	ebx, WORD PTR[edi+eax-1]
+	mov	edi, [edx].ds_prev
+	mov	[esp+scanend], ebx
+	mov	edx, [esp+chainlenwmask]
+	jmp	LookupLoop
+	ALIGN	4
+
+;/* Accept the current string, with the maximum possible length.        */
+
+LenMaximum:
+	mov	edx, [esp+deflatestate]
+	mov	DWORD PTR[esp+bestlen], MAX_MATCH
+	mov	[edx].ds_match_start, ecx
+
+;/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;          */
+;/* return s->lookahead;                                                */
+
+LeaveNow:
+	mov	edx, [esp+deflatestate]
+	mov	ebx, [esp+bestlen]
+	mov	eax, [edx].ds_lookahead
+	cmp	ebx, eax
+	jg	SHORT LookaheadRet
+	mov	eax, ebx
+LookaheadRet:
+
+; Restore the stack and return from whence we came.
+
+	add	esp, varsize
+	pop	ebx
+	pop	esi
+	pop	edi
+	pop	ebp
+	ret
+
+_longest_match	ENDP
+
+_TEXT	ENDS
+END
--- a/contrib/masmx64/bld_ml64.bat
+++ b/contrib/masmx64/bld_ml64.bat
@@ -0,0 +1,2 @@
+ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+ml64.exe /Flgvmat64   /c /Zi gvmat64.asm
--- a/contrib/masmx64/gvmat64.asm
+++ b/contrib/masmx64/gvmat64.asm
@@ -0,0 +1,513 @@
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             /* current match */
+
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-2005 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for infozip Zip, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm
+;
+; to compile this file for zLib, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
+; Be carrefull to adapt zlib1222add below to your version of zLib
+;   (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change
+;    value of zlib1222add later)
+;
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005 and Windows 2003 server DDK
+;
+;   (you can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
+;
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+.code
+longest_match PROC
+
+
+;LocalVarsSize   equ 88
+ LocalVarsSize   equ 72
+
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+
+ chainlenwmask   equ  rsp + 8 - LocalVarsSize    ; high word: current chain len
+                                                 ; low word: s->wmask
+;window          equ  rsp + xx - LocalVarsSize   ; local copy of s->window ; stored in r10
+;windowbestlen   equ  rsp + xx - LocalVarsSize   ; s->window + bestlen , use r10+r11
+;scanstart       equ  rsp + xx - LocalVarsSize   ; first two bytes of string ; stored in r12w
+;scanend         equ  rsp + xx - LocalVarsSize   ; last two bytes of string use ebx
+;scanalign       equ  rsp + xx - LocalVarsSize   ; dword-misalignment of string r13
+;bestlen         equ  rsp + xx - LocalVarsSize   ; size of best match so far -> r11d
+;scan            equ  rsp + xx - LocalVarsSize   ; ptr to string wanting match -> r9
+IFDEF INFOZIP
+ELSE
+ nicematch       equ  (rsp + 16 - LocalVarsSize) ; a good enough match size
+ENDIF
+
+save_rdi        equ  rsp + 24 - LocalVarsSize
+save_rsi        equ  rsp + 32 - LocalVarsSize
+save_rbx        equ  rsp + 40 - LocalVarsSize
+save_rbp        equ  rsp + 48 - LocalVarsSize
+save_r12        equ  rsp + 56 - LocalVarsSize
+save_r13        equ  rsp + 64 - LocalVarsSize
+;save_r14        equ  rsp + 72 - LocalVarsSize
+;save_r15        equ  rsp + 80 - LocalVarsSize
+
+
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+
+IFDEF INFOZIP
+
+_DATA   SEGMENT
+COMM    window_size:DWORD
+; WMask ; 7fff
+COMM    window:BYTE:010040H
+COMM    prev:WORD:08000H
+; MatchLen : unused
+; PrevMatch : unused
+COMM    strstart:DWORD
+COMM    match_start:DWORD
+; Lookahead : ignore
+COMM    prev_length:DWORD ; PrevLen
+COMM    max_chain_length:DWORD
+COMM    good_match:DWORD
+COMM    nice_match:DWORD
+prev_ad equ OFFSET prev
+window_ad equ OFFSET window
+nicematch equ nice_match
+_DATA ENDS
+WMask equ 07fffh
+
+ELSE
+
+  IFNDEF zlib1222add
+    zlib1222add equ 8
+  ENDIF
+dsWSize         equ 56+zlib1222add+(zlib1222add/2)
+dsWMask         equ 64+zlib1222add+(zlib1222add/2)
+dsWindow        equ 72+zlib1222add
+dsPrev          equ 88+zlib1222add
+dsMatchLen      equ 128+zlib1222add
+dsPrevMatch     equ 132+zlib1222add
+dsStrStart      equ 140+zlib1222add
+dsMatchStart    equ 144+zlib1222add
+dsLookahead     equ 148+zlib1222add
+dsPrevLen       equ 152+zlib1222add
+dsMaxChainLen   equ 156+zlib1222add
+dsGoodMatch     equ 172+zlib1222add
+dsNiceMatch     equ 176+zlib1222add
+
+window_size     equ [ rcx + dsWSize]
+WMask           equ [ rcx + dsWMask]
+window_ad       equ [ rcx + dsWindow]
+prev_ad         equ [ rcx + dsPrev]
+strstart        equ [ rcx + dsStrStart]
+match_start     equ [ rcx + dsMatchStart]
+Lookahead       equ [ rcx + dsLookahead] ; 0ffffffffh on infozip
+prev_length     equ [ rcx + dsPrevLen]
+max_chain_length equ [ rcx + dsMaxChainLen]
+good_match      equ [ rcx + dsGoodMatch]
+nice_match      equ [ rcx + dsNiceMatch]
+ENDIF
+
+; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+
+        mov [save_rdi],rdi
+        mov [save_rsi],rsi
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+IFDEF INFOZIP
+        mov r8d,ecx
+ELSE
+        mov r8d,edx
+ENDIF
+        mov [save_r12],r12
+        mov [save_r13],r13
+;        mov [save_r14],r14
+;        mov [save_r15],r15
+
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+;;; on zlib only
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+IFDEF INFOZIP
+        mov [chainlenwmask], ebx
+; on infozip nice_match = [nice_match]
+ELSE
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+ENDIF
+
+;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+IFDEF INFOZIP
+        mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1))
+ELSE
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+ENDIF
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+;;; int best_len = s->prev_length;
+
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+        jnz LookupLoop1
+
+
+;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        lea rsi,[r8+r10]
+        mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+        jmp short LoopCmps
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0000FFFFh
+        jnz LenLower
+
+        test eax,0ffffffffh
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+        jnz LenLower
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+LenLower:   sub al, 1
+        adc rdx, 0
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+        jge LeaveNow
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+IFDEF INFOZIP
+        mov eax,r11d
+ELSE
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+ENDIF
+
+;;; Restore the stack and return from whence we came.
+
+
+        mov rsi,[save_rsi]
+        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+;        mov r14,[save_r14]
+;        mov r15,[save_r15]
+
+
+        ret 0
+; please don't remove this string !
+; Your can freely use gvmat64 in any free or commercial app
+; but it is far better don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+longest_match   ENDP
+
+match_init PROC
+  ret 0
+match_init ENDP
+
+
+END
--- a/contrib/masmx64/gvmat64.obj
+++ b/contrib/masmx64/gvmat64.obj
--- a/contrib/masmx64/inffas8664.c
+++ b/contrib/masmx64/inffas8664.c
@@ -0,0 +1,186 @@
+/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
+ * version for AMD64 on Windows using Microsoft C compiler
+ *
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
+ *
+ * inffas8664.c call function inffas8664fnc in inffasx64.asm
+ *  inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support.  This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes.  I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram.  The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+ * the moment.  I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled.  I will attempt to merge the MMX code into this version.  Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ *
+ */
+
+#include <stdio.h>
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+
+
+
+    typedef struct inffast_ar {
+/* 64   32                               x86  x86_64 */
+/* ar offset                              register */
+/*  0    0 */ void *esp;                /* esp save */
+/*  8    4 */ void *ebp;                /* ebp save */
+/* 16    8 */ unsigned char FAR *in;    /* esi rsi  local strm->next_in */
+/* 24   12 */ unsigned char FAR *last;  /*     r9   while in < last */
+/* 32   16 */ unsigned char FAR *out;   /* edi rdi  local strm->next_out */
+/* 40   20 */ unsigned char FAR *beg;   /*          inflate()'s init next_out */
+/* 48   24 */ unsigned char FAR *end;   /*     r10  while out < end */
+/* 56   28 */ unsigned char FAR *window;/*          size of window, wsize!=0 */
+/* 64   32 */ code const FAR *lcode;    /* ebp rbp  local strm->lencode */
+/* 72   36 */ code const FAR *dcode;    /*     r11  local strm->distcode */
+/* 80   40 */ size_t /*unsigned long */hold;       /* edx rdx  local strm->hold */
+/* 88   44 */ unsigned bits;            /* ebx rbx  local strm->bits */
+/* 92   48 */ unsigned wsize;           /*          window size */
+/* 96   52 */ unsigned write;           /*          window write index */
+/*100   56 */ unsigned lmask;           /*     r12  mask for lcode */
+/*104   60 */ unsigned dmask;           /*     r13  mask for dcode */
+/*108   64 */ unsigned len;             /*     r14  match length */
+/*112   68 */ unsigned dist;            /*     r15  match distance */
+/*116   72 */ unsigned status;          /*          set when state chng*/
+    } type_ar;
+#ifdef ASMINF
+
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    type_ar ar;
+    void inffas8664fnc(struct inffast_ar * par);
+
+    
+
+#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258    
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+
+    ar.in = strm->next_in;
+    ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+    ar.out = strm->next_out;
+    ar.beg = ar.out - (start - strm->avail_out);
+    ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+    ar.wsize = state->wsize;
+    ar.write = state->write;
+    ar.window = state->window;
+    ar.hold = state->hold;
+    ar.bits = state->bits;
+    ar.lcode = state->lencode;
+    ar.dcode = state->distcode;
+    ar.lmask = (1U << state->lenbits) - 1;
+    ar.dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+
+    /* align in on 1/2 hold size boundary */
+    while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+        ar.hold += (unsigned long)*ar.in++ << ar.bits;
+        ar.bits += 8;
+    }
+
+    inffas8664fnc(&ar);
+
+    if (ar.status > 1) {
+        if (ar.status == 2)
+            strm->msg = "invalid literal/length code";
+        else if (ar.status == 3)
+            strm->msg = "invalid distance code";
+        else
+            strm->msg = "invalid distance too far back";
+        state->mode = BAD;
+    }
+    else if ( ar.status == 1 ) {
+        state->mode = TYPE;
+    }
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    ar.len = ar.bits >> 3;
+    ar.in -= ar.len;
+    ar.bits -= ar.len << 3;
+    ar.hold &= (1U << ar.bits) - 1;
+
+    /* update state and return */
+    strm->next_in = ar.in;
+    strm->next_out = ar.out;
+    strm->avail_in = (unsigned)(ar.in < ar.last ?
+                                PAD_AVAIL_IN + (ar.last - ar.in) :
+                                PAD_AVAIL_IN - (ar.in - ar.last));
+    strm->avail_out = (unsigned)(ar.out < ar.end ?
+                                 PAD_AVAIL_OUT + (ar.end - ar.out) :
+                                 PAD_AVAIL_OUT - (ar.out - ar.end));
+    state->hold = (unsigned long)ar.hold;
+    state->bits = ar.bits;
+    return;
+}
+
+#endif
--- a/contrib/masmx64/inffasx64.asm
+++ b/contrib/masmx64/inffasx64.asm
@@ -0,0 +1,392 @@
+; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
+; version for AMD64 on Windows using Microsoft C compiler
+;
+; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+; inffasx64.asm is called by inffas8664.c, which contain more info.
+
+
+; to compile this file, I use option
+;   ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+;   with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+;
+;   (you can get Windows 2003 server DDK with ml64 and cl.exe for AMD64 from 
+;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
+;
+
+.code
+inffas8664fnc PROC
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+	mov [rsp-8],rsi
+	mov [rsp-16],rdi
+	mov [rsp-24],r12
+	mov [rsp-32],r13
+	mov [rsp-40],r14
+	mov [rsp-48],r15
+	mov [rsp-56],rbx
+
+	mov rax,rcx
+
+	mov	[rax+8], rbp       ; /* save regs rbp and rsp */
+	mov	[rax], rsp
+
+	mov	rsp, rax          ; /* make rsp point to &ar */
+
+	mov	rsi, [rsp+16]      ; /* rsi  = in */
+	mov	rdi, [rsp+32]      ; /* rdi  = out */
+	mov	r9, [rsp+24]       ; /* r9   = last */
+	mov	r10, [rsp+48]      ; /* r10  = end */
+	mov	rbp, [rsp+64]      ; /* rbp  = lcode */
+	mov	r11, [rsp+72]      ; /* r11  = dcode */
+	mov	rdx, [rsp+80]      ; /* rdx  = hold */
+	mov	ebx, [rsp+88]      ; /* ebx  = bits */
+	mov	r12d, [rsp+100]    ; /* r12d = lmask */
+	mov	r13d, [rsp+104]    ; /* r13d = dmask */
+                                          ; /* r14d = len */
+                                          ; /* r15d = dist */
+
+
+	cld
+	cmp	r10, rdi
+	je	L_one_time           ; /* if only one decode left */
+	cmp	r9, rsi
+
+    jne L_do_loop
+
+
+L_one_time:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code_one_time
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+	jmp	L_get_length_code_one_time
+
+ALIGN 4
+L_while_test:
+	cmp	r10, rdi
+	jbe	L_break_loop
+	cmp	r9, rsi
+	jbe	L_break_loop
+
+L_do_loop:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code    ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_length_code:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4]  ; /* eax = lcode[hold & lmask] */
+
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	mov	r8, r12            ; /* r8 = lmask */
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+
+L_get_length_code_one_time:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+L_dolen:
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+	mov	r14d, eax         ; /* len = this */
+	shr	r14d, 16           ; /* len = this.val */
+	mov	cl, al
+
+	test	al, 16
+	jz	L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_decode_distance    ; /* if (!op) */
+
+L_add_bits_to_len:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r14d, eax         ; /* len += hold & mask[op] */
+
+L_decode_distance:
+	mov	r8, r13           ; /* r8 = dmask */
+	cmp	bl, 32
+	ja	L_get_distance_code  ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_distance_code:
+	and	r8, rdx           ; /* r8 &= hold */
+	mov	eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
+
+L_dodist:
+	mov	r15d, eax         ; /* dist = this */
+	shr	r15d, 16           ; /* dist = this.val */
+	mov	cl, ah
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+	mov	cl, al            ; /* cl = this.op */
+
+	test	al, 16             ; /* if ((op & 16) == 0) */
+	jz	L_test_for_second_level_dist
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_check_dist_one
+
+L_add_bits_to_dist:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax                 ; /* (1 << op) - 1 */
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r15d, eax         ; /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+	mov	r8, rsi           ; /* save in so from can use it's reg */
+	mov	rax, rdi
+	sub	rax, [rsp+40]      ; /* nbytes = out - beg */
+
+	cmp	eax, r15d
+	jb	L_clip_window        ; /* if (dist > nbytes) 4.2% */
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	rsi, rdi
+	sub	rsi, r15          ; /* from = out - dist */
+
+	sar	ecx, 1
+	jnc	L_copy_two           ; /* if len % 2 == 0 */
+
+	rep     movsw
+	mov	al, [rsi]
+	mov	[rdi], al
+	inc	rdi
+
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+L_copy_two:
+	rep     movsw
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+ALIGN 4
+L_check_dist_one:
+	cmp	r15d, 1            ; /* if dist 1, is a memset */
+	jne	L_check_window
+	cmp	[rsp+40], rdi      ; /* if out == beg, outside window */
+	je	L_check_window
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	al, [rdi-1]
+	mov	ah, al
+
+	sar	ecx, 1
+	jnc	L_set_two
+	mov	[rdi], al
+	inc	rdi
+
+L_set_two:
+	rep     stosw
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+	test	al, 64
+	jnz	L_test_for_end_of_block ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r14d        ; /* eax += len */
+	mov	eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
+	jmp	L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+	test	al, 64
+	jnz	L_invalid_distance_code ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r15d        ; /* eax += dist */
+	mov	eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
+	jmp	L_dodist
+
+ALIGN 4
+L_clip_window:
+	mov	ecx, eax         ; /* ecx = nbytes */
+	mov	eax, [rsp+92]     ; /* eax = wsize, prepare for dist cmp */
+	neg	ecx                ; /* nbytes = -nbytes */
+
+	cmp	eax, r15d
+	jb	L_invalid_distance_too_far ; /* if (dist > wsize) */
+
+	add	ecx, r15d         ; /* nbytes = dist - nbytes */
+	cmp	dword ptr [rsp+96], 0
+	jne	L_wrap_around_window ; /* if (write != 0) */
+
+	mov	rsi, [rsp+56]     ; /* from  = window */
+	sub	eax, ecx         ; /* eax  -= nbytes */
+	add	rsi, rax         ; /* from += wsize - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	r14d, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* eax -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = &out[ -dist ] */
+	jmp	L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+	mov	eax, [rsp+96]     ; /* eax = write */
+	cmp	ecx, eax
+	jbe	L_contiguous_in_window ; /* if (write >= nbytes) */
+
+	mov	esi, [rsp+92]     ; /* from  = wsize */
+	add	rsi, [rsp+56]     ; /* from += window */
+	add	rsi, rax         ; /* from += write */
+	sub	rsi, rcx         ; /* from -= nbytes */
+	sub	ecx, eax         ; /* nbytes -= write */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, [rsp+56]     ; /* from = window */
+	mov	ecx, [rsp+96]     ; /* nbytes = write */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+	mov	rsi, [rsp+56]     ; /* rsi = window */
+	add	rsi, rax
+	sub	rsi, rcx         ; /* from += write - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy           ; /* if (nbytes >= len) */
+
+ALIGN 4
+L_do_copy:
+	mov	ecx, eax         ; /* ecx = len */
+	rep     movsb
+
+	mov	rsi, r8          ; /* move in back to %esi, toss from */
+	jmp	L_while_test
+
+L_test_for_end_of_block:
+	test	al, 32
+	jz	L_invalid_literal_length_code
+	mov	dword ptr [rsp+116], 1
+	jmp	L_break_loop_with_status
+
+L_invalid_literal_length_code:
+	mov	dword ptr [rsp+116], 2
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_code:
+	mov	dword ptr [rsp+116], 3
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_too_far:
+	mov	dword ptr [rsp+116], 4
+	jmp	L_break_loop_with_status
+
+L_break_loop:
+	mov	dword ptr [rsp+116], 0
+
+L_break_loop_with_status:
+; /* put in, out, bits, and hold back into ar and pop esp */
+	mov	[rsp+16], rsi     ; /* in */
+	mov	[rsp+32], rdi     ; /* out */
+	mov	[rsp+88], ebx     ; /* bits */
+	mov	[rsp+80], rdx     ; /* hold */
+
+	mov	rax, [rsp]       ; /* restore rbp and rsp */
+	mov	rbp, [rsp+8]
+	mov	rsp, rax
+
+
+
+	mov rsi,[rsp-8]
+	mov rdi,[rsp-16]
+	mov r12,[rsp-24]
+	mov r13,[rsp-32]
+	mov r14,[rsp-40]
+	mov r15,[rsp-48]
+	mov rbx,[rsp-56]
+	
+    ret 0
+;          :
+;          : "m" (ar)
+;          : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+;            "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+;    );
+
+inffas8664fnc 	ENDP
+;_TEXT	ENDS
+END
--- a/contrib/masmx64/inffasx64.obj
+++ b/contrib/masmx64/inffasx64.obj
--- a/contrib/masmx64/readme.txt
+++ b/contrib/masmx64/readme.txt
@@ -0,0 +1,28 @@
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
+for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
+
+gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
+   assembly optimized version from Jean-loup Gailly original longest_match function
+
+inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
+   original function from Mark Adler
+
+Use instructions
+----------------
+Copy these files into the zlib source directory.
+
+define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
+and inffasx64.obj and gvmat64.obj as object to link.
+
+
+Build instructions
+------------------
+run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
+
+ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from 
+  http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
--- a/contrib/masmx86/bld_ml32.bat
+++ b/contrib/masmx86/bld_ml32.bat
@@ -0,0 +1,2 @@
+ml /coff /Zi /c /Flgvmat32.lst  gvmat32.asm 
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm 
--- a/contrib/masmx86/gvmat32.asm
+++ b/contrib/masmx86/gvmat32.asm
--- a/contrib/masmx86/gvmat32.obj
+++ b/contrib/masmx86/gvmat32.obj
--- a/contrib/masmx86/gvmat32c.c
+++ b/contrib/masmx86/gvmat32c.c
@@ -1,206 +1,62 @@
-/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
- * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
- * File written by Gilles Vollant, by modifiying the longest_match
- *  from Jean-loup Gailly in deflate.c
- *  it prepare all parameters and call the assembly longest_match_gvasm
- *  longest_match execute standard C code is wmask != 0x7fff
- *     (assembly code is faster with a fixed wmask)
- *
- */
-
-#include "deflate.h"
-
-#ifdef ASMV
-#define NIL 0
-
-#define UNALIGNED_OK
-
-
-/* if your C compiler don't add underline before function name,
-        define ADD_UNDERLINE_ASMFUNC */
-#ifdef ADD_UNDERLINE_ASMFUNC
-#define longest_match_7fff _longest_match_7fff
-#define longest_match_686  _longest_match_686
-#define cpudetect32        _cpudetect32
-#endif
-
-
-
-void match_init()
-{
-}
-
-unsigned long cpudetect32();
-
-uInt longest_match_c(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-
-uInt longest_match_7fff(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-uInt longest_match_686(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-uInt longest_match(
-    deflate_state *s,
-    IPos cur_match)                             /* current match */
-{
-    static uInt iIsPPro=2;
-
-    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
-        return longest_match_7fff(s,cur_match);
-
-    if (iIsPPro==1)
-        return longest_match_686(s,cur_match);
-
-    if (iIsPPro==2)
-        iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
-
-    return longest_match_c(s,cur_match);
-}
-
-
-
-uInt longest_match_c(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-
-#endif /* ASMV */
+/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
+ * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+ * File written by Gilles Vollant, by modifiying the longest_match
+ *  from Jean-loup Gailly in deflate.c
+ *  it prepare all parameters and call the assembly longest_match_gvasm
+ *  longest_match execute standard C code is wmask != 0x7fff
+ *     (assembly code is faster with a fixed wmask)
+ *
+ * Read comment at beginning of gvmat32.asm for more information
+ */
+
+#if defined(ASMV) && (!defined(NOOLDPENTIUMCODE))
+#include "deflate.h"
+
+/* if your C compiler don't add underline before function name,
+        define ADD_UNDERLINE_ASMFUNC */
+#ifdef ADD_UNDERLINE_ASMFUNC
+#define longest_match_7fff _longest_match_7fff
+#define longest_match_686  _longest_match_686
+#define cpudetect32        _cpudetect32
+#endif
+
+
+unsigned long cpudetect32();
+
+uInt longest_match_c(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+
+uInt longest_match_7fff(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+uInt longest_match_686(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+
+static uInt iIsPPro=2;
+
+void match_init ()
+{
+    iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+}
+
+uInt longest_match(
+    deflate_state *s,
+    IPos cur_match)                             /* current match */
+{
+    if (iIsPPro!=0)
+        return longest_match_686(s,cur_match);
+
+    if (s->w_mask != 0x7fff)
+        return longest_match_686(s,cur_match);
+
+    /* now ((s->w_mask == 0x7fff) && (iIsPPro==0)) */
+        return longest_match_7fff(s,cur_match);
+}
+
+
+#endif /* defined(ASMV) && (!defined(NOOLDPENTIUMCODE)) */
--- a/contrib/masmx86/inffas32.asm
+++ b/contrib/masmx86/inffas32.asm
--- a/contrib/vstudio/vc7/inffas32.obj
+++ b/contrib/vstudio/vc7/inffas32.obj
--- a/contrib/minizip/ChangeLogUnzip
+++ b/contrib/minizip/ChangeLogUnzip
@@ -1,63 +0,0 @@
-Change in 1.01b (20 may 04)
- Integrate patch from Debian package (submited by Mark Brown)
- Add tools mztools from Xavier Roche
-
-Change in 1.01 (8 may 04)
- fix buffer overrun risk in unzip.c (Xavier Roche)
- fix a minor buffer insecurity in minizip.c (Mike Whittaker)
-
-Change in 1.00: (10 sept 03)
- rename to 1.00
- cosmetic code change
-
-Change in 0.22: (19 May 03)
- crypting support (unless you define NOCRYPT)
- append file in existing zipfile
-
-Change in 0.21: (10 Mar 03)
- bug fixes
-
-Change in 0.17: (27 Jan 02)
- bug fixes
-
-Change in 0.16: (19 Jan 02)
- Support of ioapi for virtualize zip file access
-
-Change in 0.15: (19 Mar 98)
- fix memory leak in minizip.c
-
-Change in 0.14: (10 Mar 98)
- fix bugs in minizip.c sample for zipping big file
- fix problem in month in date handling
- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for
-    comment handling
-
-Change in 0.13: (6 Mar 98)
- fix bugs in zip.c
- add real minizip sample
-
-Change in 0.12: (4 Mar 98)
- add zip.c and zip.h for creates .zip file
- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
- fix miniunz.c for file without specific record for directory
-
-Change in 0.11: (3 Mar 98)
- fix bug in unzGetCurrentFileInfo for get extra field and comment
- enhance miniunz sample, remove the bad unztst.c sample
-
-Change in 0.10: (2 Mar 98)
- fix bug in unzReadCurrentFile
- rename unzip* to unz* function and structure
- remove Windows-like hungary notation variable name
- modify some structure in unzip.h
- add somes comment in source
- remove unzipGetcCurrentFile function
- replace ZUNZEXPORT by ZEXPORT
- add unzGetLocalExtrafield for get the local extrafield info
- add a new sample, miniunz.c
-
-Change in 0.4: (25 Feb 98)
- suppress the type unzipFileInZip.
-  Only on file in the zipfile can be open at the same time
- fix somes typo in code
- added tm_unz structure in unzip_file_info (date/time in readable format)
--- a/contrib/minizip/Makefile
+++ b/contrib/minizip/Makefile
@@ -1,25 +1,25 @@
-CC=cc
-CFLAGS=-O -I../..
-
-UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
-ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a
-
-.c.o:
-	$(CC) -c $(CFLAGS) $*.c
-
-all: miniunz minizip
-
-miniunz:  $(UNZ_OBJS)
-	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
-
-minizip:  $(ZIP_OBJS)
-	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
-
-test:	miniunz minizip
-	./minizip test readme.txt
-	./miniunz -l test.zip
-	mv readme.txt readme.old
-	./miniunz test.zip
-
-clean:
-	/bin/rm -f *.o *~ minizip miniunz
+CC=cc
+CFLAGS=-O -I../..
+
+UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a
+
+.c.o:
+	$(CC) -c $(CFLAGS) $*.c
+
+all: miniunz minizip
+
+miniunz:  $(UNZ_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+
+minizip:  $(ZIP_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+
+test:	miniunz minizip
+	./minizip test readme.txt
+	./miniunz -l test.zip
+	mv readme.txt readme.old
+	./miniunz test.zip
+
+clean:
+	/bin/rm -f *.o *~ minizip miniunz
--- a/contrib/minizip/MiniZip64_Changes.txt
+++ b/contrib/minizip/MiniZip64_Changes.txt
@@ -0,0 +1,7 @@
+
+MiniZip64 was derrived from MiniZip at version 1.01f
+
+Change in 1.0 (Okt 2009)
+ - **TODO - Add history**
+ 
+ 
--- a/contrib/minizip/MiniZip64_info.txt
+++ b/contrib/minizip/MiniZip64_info.txt
@@ -0,0 +1,79 @@
+MiniZip64 - Copyright (c) 2009-2010 - Mathias Svensson - Built from MiniZip by Gilles Vollant
+
+Introduction
+---------------------
+MiniZip64 is built from MiniZip by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html )
+
+When adding ZIP64 support into minizip it would result into breaking compatibility with current minizip.
+And since breaking compatibility in minizip is not wanted. I decided to create a fork of minizip 
+and create minizip64.
+
+Even though MiniZip64 is build from MiniZip, all functions and struct's have changed name so that it 
+would not collide with each other.
+
+
+Background
+---------------------
+When adding ZIP64 support I found that Even Rouault have added ZIP64 support for unzip.c into minizip 
+for a open source project called gdal ( http://www.gdal.org/ )
+
+That was used as a starting point. And after that ZIP64 support was added to zip.c
+some refactoring and code cleanup was also done.
+
+
+Changed from MiniZip to MiniZip64
+-------------------------------------
+* Filenames has got a '64' at the end of them . eg unzip.c is now called unzip64.c
+* Added ZIP64 support for unzip ( by Even Rouault )
+* Added ZIP64 support for zip ( by Mathias Svensson )
+* Reverted some changed that Even Rouault did.
+* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users.
+* Added unzip patch for BZIP Compression method (patch create by Daniel Borca)
+* Added BZIP Compress method for zip
+* Did some refactoring and code cleanup
+
+
+Credits 
+
+ Gilles Vollant    - Original MiniZip author
+ Even Rouault      - ZIP64 unzip Support
+ Daniel Borca      - BZip Compression method support in unzip
+ Mathias Svensson  - ZIP64 zip support
+ Mathias Svensson  - BZip Compression method support in zip
+ 
+ Resources 
+ 
+ ZipLayout   http://result42.com/projects/ZipFileLayout
+             Command line tool for Windows that shows the layout and information of the headers in a zip archive.
+             Used when debugging and validating the creation of zip files using MiniZip64
+			 
+			 
+ ZIP App Note  http://www.pkware.com/documents/casestudies/APPNOTE.TXT
+               Zip File specification
+        
+
+Notes.
+ * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined.
+
+License
+----------------------------------------------------------
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+----------------------------------------------------------
+
--- a/contrib/minizip/crypt.h
+++ b/contrib/minizip/crypt.h
@@ -1,9 +1,9 @@
 /* crypt.h -- base code for crypt/uncrypt ZIPfile


-   Version 1.01, May 8th, 2004
+   Version 1.01e, February 12th, 2005

-   Copyright (C) 1998-2004 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant

   This code is a modified version of crypting code in Infozip distribution

@@ -87,13 +87,12 @@ static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned lon
 #    define ZCR_SEED2 3141592654UL     /* use PI as default pattern */
 #  endif

-static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
-    const char *passwd;         /* password string */
-    unsigned char *buf;         /* where to write header */
-    int bufSize;
-    unsigned long* pkeys;
-    const unsigned long* pcrc_32_tab;
-    unsigned long crcForCrypting;
+static int crypthead(const char* passwd,      /* password string */
+                     unsigned char* buf,      /* where to write header */
+                     int bufSize,
+                     unsigned long* pkeys,
+                     const unsigned long* pcrc_32_tab, 
+                     unsigned long crcForCrypting)
 {
    int n;                       /* index in random header */
    int t;                       /* temporary */
@@ -124,8 +123,8 @@ static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
    {
        buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
    }
-    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
-    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
    return n;
 }

--- a/contrib/minizip/ioapi.c
+++ b/contrib/minizip/ioapi.c
@@ -1,74 +1,86 @@
-/* ioapi.c -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
+/* ioapi.h -- IO base function header for compress/uncompress .zip
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Version 1.01, May 8th, 2004
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+	 Modifications for Zip64 support 
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+	 For more info read MiniZip_info.txt

-   Copyright (C) 1998-2004 Gilles Vollant
 */

-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
+#if (defined(_WIN32))
+	#define _CRT_SECURE_NO_WARNINGS
+#endif

-#include "zlib.h"
 #include "ioapi.h"

+voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
+{
+    if (pfilefunc->zfile_func64.zopen64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode);
+    else
+    {
+        return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const char*)filename,mode);
+    }
+}
+
+long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin);
+    else
+    {
+        uLong offsetTruncated = (uLong)offset;
+        if (offsetTruncated != offset)
+            return -1;
+        else
+            return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin);
+    }
+}
+
+ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
+    else
+    {
+        uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
+        if ((tell_uLong) == ((uLong)-1))
+            return (ZPOS64_T)-1;
+        else
+            return tell_uLong;
+    }
+}
+
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32)
+{
+    p_filefunc64_32->zfile_func64.zopen64_file = NULL;
+    p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file;
+    p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file;
+    p_filefunc64_32->zfile_func64.ztell64_file = NULL;
+    p_filefunc64_32->zfile_func64.zseek64_file = NULL;
+    p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque;
+    p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file;
+    p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file;
+}


-/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */

-#ifndef SEEK_CUR
-#define SEEK_CUR    1
-#endif
+static voidpf  ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode));
+static uLong   ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+static uLong   ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size));
+static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream));
+static long    ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+static int     ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream));
+static int     ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));

-#ifndef SEEK_END
-#define SEEK_END    2
-#endif
-
-#ifndef SEEK_SET
-#define SEEK_SET    0
-#endif
-
-voidpf ZCALLBACK fopen_file_func OF((
-   voidpf opaque,
-   const char* filename,
-   int mode));
-
-uLong ZCALLBACK fread_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   void* buf,
-   uLong size));
-
-uLong ZCALLBACK fwrite_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   const void* buf,
-   uLong size));
-
-long ZCALLBACK ftell_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-long ZCALLBACK fseek_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   uLong offset,
-   int origin));
-
-int ZCALLBACK fclose_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-int ZCALLBACK ferror_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-
-voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
-   voidpf opaque;
-   const char* filename;
-   int mode;
+static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
 {
    FILE* file = NULL;
    const char* mode_fopen = NULL;
@@ -86,44 +98,55 @@ voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
    return file;
 }

-
-uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
-   voidpf opaque;
-   voidpf stream;
-   void* buf;
-   uLong size;
+static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
 {
-    uLong ret;
-    ret = fread(buf, 1, (size_t)size, (FILE *)stream);
-    return ret;
+    FILE* file = NULL;
+    const char* mode_fopen = NULL;
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+        mode_fopen = "rb";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+        mode_fopen = "r+b";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+        mode_fopen = "wb";
+
+    if ((filename!=NULL) && (mode_fopen != NULL))
+        file = fopen64((const char*)filename, mode_fopen);
+    return file;
 }


-uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
-   voidpf opaque;
-   voidpf stream;
-   const void* buf;
-   uLong size;
+static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
 {
    uLong ret;
-    ret = fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
    return ret;
 }

-long ZCALLBACK ftell_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
+{
+    uLong ret;
+    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 {
    long ret;
    ret = ftell((FILE *)stream);
    return ret;
 }

-long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
-   voidpf opaque;
-   voidpf stream;
-   uLong offset;
-   int origin;
+
+static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
+{
+    ZPOS64_T ret;
+    ret = ftello64((FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offset, int origin)
 {
    int fseek_origin=0;
    long ret;
@@ -141,22 +164,45 @@ long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
    default: return -1;
    }
    ret = 0;
-    fseek((FILE *)stream, offset, fseek_origin);
+    if (fseek((FILE *)stream, offset, fseek_origin) != 0)
+        ret = -1;
    return ret;
 }

-int ZCALLBACK fclose_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T offset, int origin)
+{
+    int fseek_origin=0;
+    long ret;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        fseek_origin = SEEK_CUR;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        fseek_origin = SEEK_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        fseek_origin = SEEK_SET;
+        break;
+    default: return -1;
+    }
+    ret = 0;
+
+    if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
+			ret = -1;
+
+    return ret;
+}
+
+
+static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
 {
    int ret;
    ret = fclose((FILE *)stream);
    return ret;
 }

-int ZCALLBACK ferror_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
 {
    int ret;
    ret = ferror((FILE *)stream);
@@ -175,3 +221,15 @@ void fill_fopen_filefunc (pzlib_filefunc_def)
    pzlib_filefunc_def->zerror_file = ferror_file_func;
    pzlib_filefunc_def->opaque = NULL;
 }
+
+void fill_fopen64_filefunc (zlib_filefunc64_def*  pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = fopen64_file_func;
+    pzlib_filefunc_def->zread_file = fread_file_func;
+    pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+    pzlib_filefunc_def->ztell64_file = ftell64_file_func;
+    pzlib_filefunc_def->zseek64_file = fseek64_file_func;
+    pzlib_filefunc_def->zclose_file = fclose_file_func;
+    pzlib_filefunc_def->zerror_file = ferror_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
--- a/contrib/minizip/ioapi.h
+++ b/contrib/minizip/ioapi.h
@@ -1,13 +1,98 @@
 /* ioapi.h -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Version 1.01, May 8th, 2004
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+	 Modifications for Zip64 support 
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+	 For more info read MiniZip_info.txt
+
+	 Changes
+
+    Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this)
+    Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux.
+               More if/def section may be needed to support other platforms
+    Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows. 
+		          (but you should use iowin32.c for windows instead)

-   Copyright (C) 1998-2004 Gilles Vollant
 */

-#ifndef _ZLIBIOAPI_H
-#define _ZLIBIOAPI_H
+#ifndef _ZLIBIOAPI64_H
+#define _ZLIBIOAPI64_H
+
+#ifndef _WIN32 
+
+  // Linux needs this to support file operation on files larger then 4+GB
+  // But might need better if/def to select just the platforms that needs them.
+
+	#ifndef __USE_FILE_OFFSET64
+		#define __USE_FILE_OFFSET64
+	#endif
+	#ifndef __USE_LARGEFILE64
+		#define __USE_LARGEFILE64
+	#endif
+	#ifndef _LARGEFILE64_SOURCE
+		#define _LARGEFILE64_SOURCE
+	#endif
+	#ifndef _FILE_OFFSET_BIT
+		#define _FILE_OFFSET_BIT 64
+	#endif
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zlib.h"
+
+#ifdef _MSC_VER
+ #define fopen64 fopen
+ #if _MSC_VER >= 1400
+  #define ftello64 _ftelli64
+  #define fseeko64 _fseeki64
+ #else // old MSC
+  #define ftello64 ftell
+  #define fseeko64 fseek
+ #endif
+#endif
+
+/*
+#ifndef ZPOS64_T
+  #ifdef _WIN32
+		#define ZPOS64_T fpos_t
+  #else
+    #include <stdint.h>       	
+    #define ZPOS64_T uint64_t
+  #endif
+#endif
+*/
+
+#ifdef HAVE_MINIZIP64_CONF_H
+#include "mz64conf.h"
+#endif
+
+/* a type choosen by DEFINE */
+#ifdef HAVE_64BIT_INT_CUSTOM
+typedef  64BIT_INT_CUSTOM_TYPE ZPOS64_T;
+#else
+#ifdef HAS_STDINT_H
+#include "stdint.h"
+typedef uint64_t ZPOS64_T;
+#else
+
+
+#if defined(_MSC_VER) || defined(__BORLANDC__)
+typedef unsigned __int64 ZPOS64_T;
+#else
+typedef unsigned long long int ZPOS64_T;
+#endif
+#endif
+#endif
+
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif


 #define ZLIB_FILEFUNC_SEEK_CUR (1)
@@ -23,26 +108,27 @@


 #ifndef ZCALLBACK
-
-#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
-#define ZCALLBACK CALLBACK
-#else
-#define ZCALLBACK
-#endif
+ #if (defined(WIN32) || defined(_WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
+   #define ZCALLBACK CALLBACK
+ #else
+   #define ZCALLBACK
+ #endif
 #endif

-#ifdef __cplusplus
-extern "C" {
-#endif

-typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode));
-typedef uLong  (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-typedef uLong  (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
-typedef long   (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream));
-typedef long   (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin));
-typedef int    (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream));
-typedef int    (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));

+
+typedef voidpf   (ZCALLBACK *open_file_func)      OF((voidpf opaque, const char* filename, int mode));
+typedef uLong    (ZCALLBACK *read_file_func)      OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+typedef uLong    (ZCALLBACK *write_file_func)     OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+typedef int      (ZCALLBACK *close_file_func)     OF((voidpf opaque, voidpf stream));
+typedef int      (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
+
+typedef long     (ZCALLBACK *tell_file_func)      OF((voidpf opaque, voidpf stream));
+typedef long     (ZCALLBACK *seek_file_func)      OF((voidpf opaque, voidpf stream, uLong offset, int origin));
+
+
+/* here is the "old" 32 bits structure structure */
 typedef struct zlib_filefunc_def_s
 {
    open_file_func      zopen_file;
@@ -55,21 +141,54 @@ typedef struct zlib_filefunc_def_s
    voidpf              opaque;
 } zlib_filefunc_def;

+typedef ZPOS64_T (ZCALLBACK *tell64_file_func)    OF((voidpf opaque, voidpf stream));
+typedef long     (ZCALLBACK *seek64_file_func)    OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+typedef voidpf   (ZCALLBACK *open64_file_func)    OF((voidpf opaque, const void* filename, int mode));

+typedef struct zlib_filefunc64_def_s
+{
+    open64_file_func    zopen64_file;
+    read_file_func      zread_file;
+    write_file_func     zwrite_file;
+    tell64_file_func    ztell64_file;
+    seek64_file_func    zseek64_file;
+    close_file_func     zclose_file;
+    testerror_file_func zerror_file;
+    voidpf              opaque;
+} zlib_filefunc64_def;

+void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def));
 void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));

-#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size))
-#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size))
-#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream))
-#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode))
-#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream))
-#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream))
+/* now internal definition, only for zip.c and unzip.h */
+typedef struct zlib_filefunc64_32_def_s
+{
+    zlib_filefunc64_def zfile_func64;
+    open_file_func      zopen32_file;
+    tell_file_func      ztell32_file;
+    seek_file_func      zseek32_file;
+} zlib_filefunc64_32_def;


+#define ZREAD64(filefunc,filestream,buf,size)     ((*((filefunc).zfile_func64.zread_file))   ((filefunc).zfile_func64.opaque,filestream,buf,size))
+#define ZWRITE64(filefunc,filestream,buf,size)    ((*((filefunc).zfile_func64.zwrite_file))  ((filefunc).zfile_func64.opaque,filestream,buf,size))
+//#define ZTELL64(filefunc,filestream)            ((*((filefunc).ztell64_file)) ((filefunc).opaque,filestream))
+//#define ZSEEK64(filefunc,filestream,pos,mode)   ((*((filefunc).zseek64_file)) ((filefunc).opaque,filestream,pos,mode))
+#define ZCLOSE64(filefunc,filestream)             ((*((filefunc).zfile_func64.zclose_file))  ((filefunc).zfile_func64.opaque,filestream))
+#define ZERROR64(filefunc,filestream)             ((*((filefunc).zfile_func64.zerror_file))  ((filefunc).zfile_func64.opaque,filestream))
+
+voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode));
+long    call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin));
+ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream));
+
+void    fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32);
+
+#define ZOPEN64(filefunc,filename,mode)         (call_zopen64((&(filefunc)),(filename),(mode)))
+#define ZTELL64(filefunc,filestream)            (call_ztell64((&(filefunc)),(filestream)))
+#define ZSEEK64(filefunc,filestream,pos,mode)   (call_zseek64((&(filefunc)),(filestream),(pos),(mode)))
+
 #ifdef __cplusplus
 }
 #endif

 #endif
-
--- a/contrib/minizip/iowin32.c
+++ b/contrib/minizip/iowin32.c
@@ -1,10 +1,14 @@
 /* iowin32.c -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
-   This IO API version uses the Win32 API (for Microsoft Windows)
+     Version 1.1, January 7th, 2010
+     part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Version 1.01, May 8th, 2004
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+	 Modifications for Zip64 support 
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+     For more info read MiniZip_info.txt

-   Copyright (C) 1998-2004 Gilles Vollant
 */

 #include <stdlib.h>
@@ -21,40 +25,13 @@
 #define INVALID_SET_FILE_POINTER ((DWORD)-1)
 #endif

-voidpf ZCALLBACK win32_open_file_func OF((
-   voidpf opaque,
-   const char* filename,
-   int mode));
-
-uLong ZCALLBACK win32_read_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   void* buf,
-   uLong size));
-
-uLong ZCALLBACK win32_write_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   const void* buf,
-   uLong size));
-
-long ZCALLBACK win32_tell_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-long ZCALLBACK win32_seek_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   uLong offset,
-   int origin));
-
-int ZCALLBACK win32_close_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-int ZCALLBACK win32_error_file_func OF((
-   voidpf opaque,
-   voidpf stream));
+voidpf  ZCALLBACK win32_open_file_func  OF((voidpf opaque, const char* filename, int mode));
+uLong   ZCALLBACK win32_read_file_func  OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+uLong   ZCALLBACK win32_write_file_func OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+ZPOS64_T ZCALLBACK win32_tell64_file_func  OF((voidpf opaque, voidpf stream));
+long    ZCALLBACK win32_seek64_file_func  OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+int     ZCALLBACK win32_close_file_func OF((voidpf opaque, voidpf stream));
+int     ZCALLBACK win32_error_file_func OF((voidpf opaque, voidpf stream));

 typedef struct
 {
@@ -62,69 +39,121 @@ typedef struct
    int error;
 } WIN32FILE_IOWIN;

-voidpf ZCALLBACK win32_open_file_func (opaque, filename, mode)
-   voidpf opaque;
-   const char* filename;
-   int mode;
-{
-    const char* mode_fopen = NULL;
-    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
-    HANDLE hFile = 0;
-    voidpf ret=NULL;

-    dwDesiredAccess = dwShareMode = dwFlagsAndAttributes = 0;
+static void win32_translate_open_mode(int mode,
+                                      DWORD* lpdwDesiredAccess,
+                                      DWORD* lpdwCreationDisposition,
+                                      DWORD* lpdwShareMode,
+                                      DWORD* lpdwFlagsAndAttributes)
+{
+    *lpdwDesiredAccess = *lpdwShareMode = *lpdwFlagsAndAttributes = *lpdwCreationDisposition = 0;

    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
    {
-        dwDesiredAccess = GENERIC_READ;
-        dwCreationDisposition = OPEN_EXISTING;
-        dwShareMode = FILE_SHARE_READ;
+        *lpdwDesiredAccess = GENERIC_READ;
+        *lpdwCreationDisposition = OPEN_EXISTING;
+        *lpdwShareMode = FILE_SHARE_READ;
    }
-    else
-    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+    else if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
    {
-        dwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
-        dwCreationDisposition = OPEN_EXISTING;
+        *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        *lpdwCreationDisposition = OPEN_EXISTING;
    }
-    else
-    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+    else if (mode & ZLIB_FILEFUNC_MODE_CREATE)
    {
-        dwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
-        dwCreationDisposition = CREATE_ALWAYS;
+        *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        *lpdwCreationDisposition = CREATE_ALWAYS;
    }
+}

-    if ((filename!=NULL) && (dwDesiredAccess != 0))
-        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL,
-                      dwCreationDisposition, dwFlagsAndAttributes, NULL);
+static voidpf win32_build_iowin(HANDLE hFile)
+{
+    voidpf ret=NULL;

-    if (hFile == INVALID_HANDLE_VALUE)
-        hFile = NULL;
-
-    if (hFile != NULL)
+    if ((hFile != NULL) && (hFile != INVALID_HANDLE_VALUE))
    {
        WIN32FILE_IOWIN w32fiow;
        w32fiow.hf = hFile;
        w32fiow.error = 0;
        ret = malloc(sizeof(WIN32FILE_IOWIN));
+
        if (ret==NULL)
            CloseHandle(hFile);
-        else *((WIN32FILE_IOWIN*)ret) = w32fiow;
+        else
+            *((WIN32FILE_IOWIN*)ret) = w32fiow;
    }
    return ret;
 }

+voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;

-uLong ZCALLBACK win32_read_file_func (opaque, stream, buf, size)
-   voidpf opaque;
-   voidpf stream;
-   void* buf;
-   uLong size;
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFileA((LPCSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFileW((LPCWSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uLong size)
 {
    uLong ret=0;
    HANDLE hFile = NULL;
    if (stream!=NULL)
        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+
    if (hFile != NULL)
+    {
        if (!ReadFile(hFile, buf, size, &ret, NULL))
        {
            DWORD dwErr = GetLastError();
@@ -132,23 +161,21 @@ uLong ZCALLBACK win32_read_file_func (opaque, stream, buf, size)
                dwErr = 0;
            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
        }
+    }

    return ret;
 }


-uLong ZCALLBACK win32_write_file_func (opaque, stream, buf, size)
-   voidpf opaque;
-   voidpf stream;
-   const void* buf;
-   uLong size;
+uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* buf,uLong size)
 {
    uLong ret=0;
    HANDLE hFile = NULL;
    if (stream!=NULL)
        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;

-    if (hFile !=NULL)
+    if (hFile != NULL)
+    {
        if (!WriteFile(hFile, buf, size, &ret, NULL))
        {
            DWORD dwErr = GetLastError();
@@ -156,13 +183,12 @@ uLong ZCALLBACK win32_write_file_func (opaque, stream, buf, size)
                dwErr = 0;
            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
        }
+    }

    return ret;
 }

-long ZCALLBACK win32_tell_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream)
 {
    long ret=-1;
    HANDLE hFile = NULL;
@@ -183,11 +209,32 @@ long ZCALLBACK win32_tell_file_func (opaque, stream)
    return ret;
 }

-long ZCALLBACK win32_seek_file_func (opaque, stream, offset, origin)
-   voidpf opaque;
-   voidpf stream;
-   uLong offset;
-   int origin;
+ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream)
+{
+    ZPOS64_T ret= (ZPOS64_T)-1;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+    if (hFile)
+    {
+        LARGE_INTEGER li;
+        li.QuadPart = 0;
+        li.u.LowPart = SetFilePointer(hFile, li.u.LowPart, &li.u.HighPart, FILE_CURRENT);
+        if ( (li.LowPart == 0xFFFFFFFF) && (GetLastError() != NO_ERROR))
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = (ZPOS64_T)-1;
+        }
+        else
+            ret=li.QuadPart;
+    }
+    return ret;
+}
+
+
+long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,int origin)
 {
    DWORD dwMoveMethod=0xFFFFFFFF;
    HANDLE hFile = NULL;
@@ -224,9 +271,46 @@ long ZCALLBACK win32_seek_file_func (opaque, stream, offset, origin)
    return ret;
 }

-int ZCALLBACK win32_close_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T offset,int origin)
+{
+    DWORD dwMoveMethod=0xFFFFFFFF;
+    HANDLE hFile = NULL;
+    long ret=-1;
+
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+    switch (origin)
+    {
+        case ZLIB_FILEFUNC_SEEK_CUR :
+            dwMoveMethod = FILE_CURRENT;
+            break;
+        case ZLIB_FILEFUNC_SEEK_END :
+            dwMoveMethod = FILE_END;
+            break;
+        case ZLIB_FILEFUNC_SEEK_SET :
+            dwMoveMethod = FILE_BEGIN;
+            break;
+        default: return -1;
+    }
+
+    if (hFile)
+    {
+        LARGE_INTEGER* li = (LARGE_INTEGER*)&offset;
+        DWORD dwSet = SetFilePointer(hFile, li->u.LowPart, &li->u.HighPart, dwMoveMethod);
+        if (dwSet == INVALID_SET_FILE_POINTER)
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = -1;
+        }
+        else
+            ret=0;
+    }
+    return ret;
+}
+
+int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream)
 {
    int ret=-1;

@@ -244,9 +328,7 @@ int ZCALLBACK win32_close_file_func (opaque, stream)
    return ret;
 }

-int ZCALLBACK win32_error_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream)
 {
    int ret=-1;
    if (stream!=NULL)
@@ -256,8 +338,7 @@ int ZCALLBACK win32_error_file_func (opaque, stream)
    return ret;
 }

-void fill_win32_filefunc (pzlib_filefunc_def)
-  zlib_filefunc_def* pzlib_filefunc_def;
+void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def)
 {
    pzlib_filefunc_def->zopen_file = win32_open_file_func;
    pzlib_filefunc_def->zread_file = win32_read_file_func;
@@ -266,5 +347,43 @@ void fill_win32_filefunc (pzlib_filefunc_def)
    pzlib_filefunc_def->zseek_file = win32_seek_file_func;
    pzlib_filefunc_def->zclose_file = win32_close_file_func;
    pzlib_filefunc_def->zerror_file = win32_error_file_func;
-    pzlib_filefunc_def->opaque=NULL;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_func;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_funcA;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_funcW;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
 }
--- a/contrib/minizip/iowin32.h
+++ b/contrib/minizip/iowin32.h
@@ -1,10 +1,14 @@
 /* iowin32.h -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
-   This IO API version uses the Win32 API (for Microsoft Windows)
+     Version 1.1, January 7th, 2010
+     part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Version 1.01, May 8th, 2004
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+	 Modifications for Zip64 support 
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+	 For more info read MiniZip_info.txt

-   Copyright (C) 1998-2004 Gilles Vollant
 */

 #include <windows.h>
@@ -15,6 +19,9 @@ extern "C" {
 #endif

 void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+void fill_win32_filefunc64 OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64A OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64W OF((zlib_filefunc64_def* pzlib_filefunc_def));

 #ifdef __cplusplus
 }
--- a/contrib/minizip/miniunz.c
+++ b/contrib/minizip/miniunz.c
@@ -1,10 +1,31 @@
 /*
   miniunz.c
-   Version 1.01b, May 30th, 2004
+   Version 1.1, January 7th, 2010
+   sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Copyright (C) 1998-2004 Gilles Vollant
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+	 Modifications of Unzip for Zip64
+	 Copyright (C) 2007-2008 Even Rouault
+
+	 Modifications for Zip64 support on both zip and unzip
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 */

+#ifndef _WIN32 
+	#ifndef __USE_FILE_OFFSET64
+		#define __USE_FILE_OFFSET64
+	#endif
+	#ifndef __USE_LARGEFILE64
+		#define __USE_LARGEFILE64
+	#endif
+	#ifndef _LARGEFILE64_SOURCE
+		#define _LARGEFILE64_SOURCE
+	#endif
+	#ifndef _FILE_OFFSET_BIT
+		#define _FILE_OFFSET_BIT 64
+	#endif
+#endif

 #include <stdio.h>
 #include <stdlib.h>
@@ -27,7 +48,7 @@
 #define WRITEBUFFERSIZE (8192)
 #define MAXFILENAME (256)

-#ifdef WIN32
+#ifdef _WIN32
 #define USEWIN32IOAPI
 #include "iowin32.h"
 #endif
@@ -51,11 +72,11 @@ void change_file_date(filename,dosdate,tmu_date)
    uLong dosdate;
    tm_unz tmu_date;
 {
-#ifdef WIN32
+#ifdef _WIN32
  HANDLE hFile;
  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;

-  hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE,
+  hFile = CreateFileA(filename,GENERIC_READ | GENERIC_WRITE,
                      0,NULL,OPEN_EXISTING,0,NULL);
  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
@@ -91,8 +112,8 @@ int mymkdir(dirname)
    const char* dirname;
 {
    int ret=0;
-#ifdef WIN32
-    ret = mkdir(dirname);
+#ifdef _WIN32
+    ret = _mkdir(dirname);
 #else
 #ifdef unix
    ret = mkdir (dirname,0775);
@@ -112,6 +133,11 @@ int makedir (newdir)
    return 0;

  buffer = (char*)malloc(len+1);
+	if (buffer==NULL)
+	{
+		printf("Error allocating memory\n");
+		return UNZ_INTERNALERROR;
+	}
  strcpy(buffer,newdir);

  if (buffer[len-1] == '/') {
@@ -164,34 +190,61 @@ void do_help()
           "  -p  extract crypted file using password\n\n");
 }

+void Display64BitsSize(ZPOS64_T n, int size_char)
+{
+  /* to avoid compatibility problem , we do here the conversion */
+  char number[21];
+  int offset=19;
+  int pos_string = 19;
+  number[20]=0;
+  for (;;) {
+      number[offset]=(char)((n%10)+'0');
+      if (number[offset] != '0')
+          pos_string=offset;
+      n/=10;
+      if (offset==0)
+          break;
+      offset--;
+  }
+  {
+      int size_display_string = 19-pos_string;
+      while (size_char > size_display_string)
+      {
+          size_char--;
+          printf(" ");
+      }
+  }
+
+  printf("%s",&number[pos_string]);
+}

 int do_list(uf)
    unzFile uf;
 {
    uLong i;
-    unz_global_info gi;
+    unz_global_info64 gi;
    int err;

-    err = unzGetGlobalInfo (uf,&gi);
+    err = unzGetGlobalInfo64(uf,&gi);
    if (err!=UNZ_OK)
        printf("error %d with zipfile in unzGetGlobalInfo \n",err);
-    printf(" Length  Method   Size  Ratio   Date    Time   CRC-32     Name\n");
-    printf(" ------  ------   ----  -----   ----    ----   ------     ----\n");
+    printf("  Length  Method     Size Ratio   Date    Time   CRC-32     Name\n");
+    printf("  ------  ------     ---- -----   ----    ----   ------     ----\n");
    for (i=0;i<gi.number_entry;i++)
    {
        char filename_inzip[256];
-        unz_file_info file_info;
+        unz_file_info64 file_info;
        uLong ratio=0;
        const char *string_method;
        char charCrypt=' ';
-        err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+        err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
        if (err!=UNZ_OK)
        {
            printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
            break;
        }
        if (file_info.uncompressed_size>0)
-            ratio = (file_info.compressed_size*100)/file_info.uncompressed_size;
+            ratio = (uLong)((file_info.compressed_size*100)/file_info.uncompressed_size);

        /* display a '*' if the file is crypted */
        if ((file_info.flag & 1) != 0)
@@ -210,13 +263,18 @@ int do_list(uf)
            else if ((iLevel==2) || (iLevel==3))
              string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
        }
+        else
+        if (file_info.compression_method==Z_BZIP2ED)
+        {
+              string_method="BZip2 ";
+        }
        else
            string_method="Unkn. ";

-        printf("%7lu  %6s%c%7lu %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
-                file_info.uncompressed_size,string_method,
-                charCrypt,
-                file_info.compressed_size,
+        Display64BitsSize(file_info.uncompressed_size,7);
+        printf("  %6s%c",string_method,charCrypt);
+        Display64BitsSize(file_info.compressed_size,7);
+        printf(" %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
                ratio,
                (uLong)file_info.tmu_date.tm_mon + 1,
                (uLong)file_info.tmu_date.tm_mday,
@@ -252,9 +310,9 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
    void* buf;
    uInt size_buf;

-    unz_file_info file_info;
+    unz_file_info64 file_info;
    uLong ratio=0;
-    err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+    err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);

    if (err!=UNZ_OK)
    {
@@ -306,7 +364,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
        {
            char rep=0;
            FILE* ftestexist;
-            ftestexist = fopen(write_filename,"rb");
+            ftestexist = fopen64(write_filename,"rb");
            if (ftestexist!=NULL)
            {
                fclose(ftestexist);
@@ -337,7 +395,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)

        if ((skip==0) && (err==UNZ_OK))
        {
-            fout=fopen(write_filename,"wb");
+            fout=fopen64(write_filename,"wb");

            /* some zipfile don't contain directory alone before file */
            if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
@@ -347,7 +405,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                *(filename_withoutpath-1)='\0';
                makedir(write_filename);
                *(filename_withoutpath-1)=c;
-                fout=fopen(write_filename,"wb");
+                fout=fopen64(write_filename,"wb");
            }

            if (fout==NULL)
@@ -409,11 +467,11 @@ int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
    const char* password;
 {
    uLong i;
-    unz_global_info gi;
+    unz_global_info64 gi;
    int err;
    FILE* fout=NULL;

-    err = unzGetGlobalInfo (uf,&gi);
+    err = unzGetGlobalInfo64(uf,&gi);
    if (err!=UNZ_OK)
        printf("error %d with zipfile in unzGetGlobalInfo \n",err);

@@ -470,6 +528,7 @@ int main(argc,argv)
    const char *password=NULL;
    char filename_try[MAXFILENAME+16] = "";
    int i;
+    int ret_value=0;
    int opt_do_list=0;
    int opt_do_extract=1;
    int opt_do_extract_withoutpath=0;
@@ -532,7 +591,7 @@ int main(argc,argv)
    {

 #        ifdef USEWIN32IOAPI
-        zlib_filefunc_def ffunc;
+        zlib_filefunc64_def ffunc;
 #        endif

        strncpy(filename_try, zipfilename,MAXFILENAME-1);
@@ -540,18 +599,18 @@ int main(argc,argv)
        filename_try[ MAXFILENAME ] = '\0';

 #        ifdef USEWIN32IOAPI
-        fill_win32_filefunc(&ffunc);
-        uf = unzOpen2(zipfilename,&ffunc);
+        fill_win32_filefunc64A(&ffunc);
+        uf = unzOpen2_64(zipfilename,&ffunc);
 #        else
-        uf = unzOpen(zipfilename);
+        uf = unzOpen64(zipfilename);
 #        endif
        if (uf==NULL)
        {
            strcat(filename_try,".zip");
 #            ifdef USEWIN32IOAPI
-            uf = unzOpen2(filename_try,&ffunc);
+            uf = unzOpen2_64(filename_try,&ffunc);
 #            else
-            uf = unzOpen(filename_try);
+            uf = unzOpen64(filename_try);
 #            endif
        }
    }
@@ -564,22 +623,26 @@ int main(argc,argv)
    printf("%s opened\n",filename_try);

    if (opt_do_list==1)
-        return do_list(uf);
+        ret_value = do_list(uf);
    else if (opt_do_extract==1)
    {
+#ifdef _WIN32
+        if (opt_extractdir && _chdir(dirname)) 
+#else
        if (opt_extractdir && chdir(dirname)) 
+#endif
        {
          printf("Error changing into %s, aborting\n", dirname);
          exit(-1);
        }

        if (filename_to_extract == NULL)
-            return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite,password);
+            ret_value = do_extract(uf, opt_do_extract_withoutpath, opt_overwrite, password);
        else
-            return do_extract_onefile(uf,filename_to_extract,
-                                      opt_do_extract_withoutpath,opt_overwrite,password);
+            ret_value = do_extract_onefile(uf, filename_to_extract, opt_do_extract_withoutpath, opt_overwrite, password);
    }
-    unzCloseCurrentFile(uf);

-    return 0;
+    unzClose(uf);
+
+    return ret_value;
 }
--- a/contrib/minizip/minizip.c
+++ b/contrib/minizip/minizip.c
@@ -1,10 +1,33 @@
 /*
   minizip.c
-   Version 1.01b, May 30th, 2004
+   Version 1.1, January 7th, 2010
+   sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Copyright (C) 1998-2004 Gilles Vollant
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+	 Modifications of Unzip for Zip64
+	 Copyright (C) 2007-2008 Even Rouault
+
+	 Modifications for Zip64 support on both zip and unzip
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 */

+
+#ifndef _WIN32 
+	#ifndef __USE_FILE_OFFSET64
+		#define __USE_FILE_OFFSET64
+	#endif
+	#ifndef __USE_LARGEFILE64
+		#define __USE_LARGEFILE64
+	#endif
+	#ifndef _LARGEFILE64_SOURCE
+		#define _LARGEFILE64_SOURCE
+	#endif
+	#ifndef _FILE_OFFSET_BIT
+		#define _FILE_OFFSET_BIT 64
+	#endif
+#endif
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -24,9 +47,9 @@

 #include "zip.h"

-#ifdef WIN32
-#define USEWIN32IOAPI
-#include "iowin32.h"
+#ifdef _WIN32
+	#define USEWIN32IOAPI
+	#include "iowin32.h"
 #endif


@@ -34,7 +57,7 @@
 #define WRITEBUFFERSIZE (16384)
 #define MAXFILENAME (256)

-#ifdef WIN32
+#ifdef _WIN32
 uLong filetime(f, tmzip, dt)
    char *f;                /* name of file to get info on */
    tm_zip *tmzip;             /* return value: access, modific. and creation times */
@@ -44,9 +67,9 @@ uLong filetime(f, tmzip, dt)
  {
      FILETIME ftLocal;
      HANDLE hFind;
-      WIN32_FIND_DATA  ff32;
+      WIN32_FIND_DATAA ff32;

-      hFind = FindFirstFile(f,&ff32);
+      hFind = FindFirstFileA(f,&ff32);
      if (hFind != INVALID_HANDLE_VALUE)
      {
        FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
@@ -119,7 +142,7 @@ int check_exist_file(filename)
 {
    FILE* ftestexist;
    int ret = 1;
-    ftestexist = fopen(filename,"rb");
+    ftestexist = fopen64(filename,"rb");
    if (ftestexist==NULL)
        ret = 0;
    else
@@ -129,18 +152,20 @@ int check_exist_file(filename)

 void do_banner()
 {
-    printf("MiniZip 1.01b, demo of zLib + Zip package written by Gilles Vollant\n");
-    printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
+    printf("MiniZip64 1.0, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
+    printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n");
+    printf("more info on MiniZip64 at http://result42.com/projects/MiniZip64\n\n");
 }

 void do_help()
 {
-    printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] file.zip [files_to_add]\n\n" \
+    printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \
           "  -o  Overwrite existing file.zip\n" \
           "  -a  Append to existing file.zip\n" \
           "  -0  Store only\n" \
           "  -1  Compress faster\n" \
-           "  -9  Compress better\n\n");
+           "  -9  Compress better\n\n" \
+           "  -j  exclude path. store only the file name.\n\n");
 }

 /* calculate the CRC32 of a file,
@@ -149,7 +174,7 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
 {
   unsigned long calculate_crc=0;
   int err=ZIP_OK;
-   FILE * fin = fopen(filenameinzip,"rb");
+   FILE * fin = fopen64(filenameinzip,"rb");
   unsigned long size_read = 0;
   unsigned long total_read = 0;
   if (fin==NULL)
@@ -179,10 +204,33 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
        fclose(fin);

    *result_crc=calculate_crc;
-    printf("file %s crc %x\n",filenameinzip,calculate_crc);
+    printf("file %s crc %lx\n", filenameinzip, calculate_crc);
    return err;
 }

+int isLargeFile(const char* filename)
+{
+  int largeFile = 0;
+  ZPOS64_T pos = 0;
+  FILE* pFile = fopen64(filename, "rb");
+
+  if(pFile != NULL)
+  {
+    int n = fseeko64(pFile, 0, SEEK_END);
+
+    pos = ftello64(pFile);
+    
+		printf("File : %s is %lld bytes\n", filename, pos);
+    
+    if(pos >= 0xffffffff)
+     largeFile = 1;
+
+		fclose(pFile);
+  }
+  
+ return largeFile;
+}
+
 int main(argc,argv)
    int argc;
    char *argv[];
@@ -190,6 +238,7 @@ int main(argc,argv)
    int i;
    int opt_overwrite=0;
    int opt_compress_level=Z_DEFAULT_COMPRESSION;
+    int opt_exclude_path=0;
    int zipfilenamearg = 0;
    char filename_try[MAXFILENAME+16];
    int zipok;
@@ -222,6 +271,8 @@ int main(argc,argv)
                        opt_overwrite = 2;
                    if ((c>='0') && (c<='9'))
                        opt_compress_level = c-'0';
+                    if ((c=='j') || (c=='J'))
+                        opt_exclude_path = 1;

                    if (((c=='p') || (c=='P')) && (i+1<argc))
                    {
@@ -231,8 +282,12 @@ int main(argc,argv)
                }
            }
            else
+            {
                if (zipfilenamearg == 0)
+                {
                    zipfilenamearg = i ;
+                }
+            }
        }
    }

@@ -245,7 +300,9 @@ int main(argc,argv)
    }

    if (zipfilenamearg==0)
+    {
        zipok=0;
+    }
    else
    {
        int i,len;
@@ -302,11 +359,11 @@ int main(argc,argv)
        zipFile zf;
        int errclose;
 #        ifdef USEWIN32IOAPI
-        zlib_filefunc_def ffunc;
-        fill_win32_filefunc(&ffunc);
-        zf = zipOpen2(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
+        zlib_filefunc64_def ffunc;
+        fill_win32_filefunc64A(&ffunc);
+        zf = zipOpen2_64(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
 #        else
-        zf = zipOpen(filename_try,(opt_overwrite==2) ? 2 : 0);
+        zf = zipOpen64(filename_try,(opt_overwrite==2) ? 2 : 0);
 #        endif

        if (zf == NULL)
@@ -329,8 +386,10 @@ int main(argc,argv)
                FILE * fin;
                int size_read;
                const char* filenameinzip = argv[i];
+                const char *savefilenameinzip;
                zip_fileinfo zi;
                unsigned long crcFile=0;
+                int zip64 = 0;

                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour =
                zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0;
@@ -347,20 +406,49 @@ int main(argc,argv)
 */
                if ((password != NULL) && (err==ZIP_OK))
                    err = getFileCrc(filenameinzip,buf,size_buf,&crcFile);
+ 
+                zip64 = isLargeFile(filenameinzip);

-                err = zipOpenNewFileInZip3(zf,filenameinzip,&zi,
+							 /* The path name saved, should not include a leading slash. */
+               /*if it did, windows/xp and dynazip couldn't read the zip file. */
+                 savefilenameinzip = filenameinzip;
+                 while( savefilenameinzip[0] == '\\' || savefilenameinzip[0] == '/' )
+                 {
+                     savefilenameinzip++;
+                 }
+
+                 /*should the zip file contain any path at all?*/
+                 if( opt_exclude_path )
+                 {
+                     const char *tmpptr;
+                     const char *lastslash = 0;
+                     for( tmpptr = savefilenameinzip; *tmpptr; tmpptr++)
+                     {
+                         if( *tmpptr == '\\' || *tmpptr == '/')
+                         {
+                             lastslash = tmpptr;
+                         }
+                     }
+                     if( lastslash != NULL )
+                     {
+                         savefilenameinzip = lastslash+1; // base filename follows last slash.
+                     }
+                 }
+
+                 /**/
+                err = zipOpenNewFileInZip3_64(zf,savefilenameinzip,&zi,
                                 NULL,0,NULL,0,NULL /* comment*/,
                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
                                 opt_compress_level,0,
                                 /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */
                                 -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
-                                 password,crcFile);
+                                 password,crcFile, zip64);

                if (err != ZIP_OK)
                    printf("error in opening %s in zipfile\n",filenameinzip);
                else
                {
-                    fin = fopen(filenameinzip,"rb");
+                    fin = fopen64(filenameinzip,"rb");
                    if (fin==NULL)
                    {
                        err=ZIP_ERRNO;
--- a/contrib/minizip/mztools.c
+++ b/contrib/minizip/mztools.c
@@ -1,281 +1,281 @@
-/*
-  Additional tools for Minizip
-  Code: Xavier Roche '2004
-  License: Same as ZLIB (www.gzip.org)
-*/
-
-/* Code */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "zlib.h"
-#include "unzip.h"
-
-#define READ_8(adr)  ((unsigned char)*(adr))
-#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
-#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
-
-#define WRITE_8(buff, n) do { \
-  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
-} while(0)
-#define WRITE_16(buff, n) do { \
-  WRITE_8((unsigned char*)(buff), n); \
-  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
-} while(0)
-#define WRITE_32(buff, n) do { \
-  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
-  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
-} while(0)
-
-extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
-const char* file;
-const char* fileOut;
-const char* fileOutTmp;
-uLong* nRecovered;
-uLong* bytesRecovered;
-{
-  int err = Z_OK;
-  FILE* fpZip = fopen(file, "rb");
-  FILE* fpOut = fopen(fileOut, "wb");
-  FILE* fpOutCD = fopen(fileOutTmp, "wb");
-  if (fpZip != NULL &&  fpOut != NULL) {
-    int entries = 0;
-    uLong totalBytes = 0;
-    char header[30];
-    char filename[256];
-    char extra[1024];
-    int offset = 0;
-    int offsetCD = 0;
-    while ( fread(header, 1, 30, fpZip) == 30 ) {
-      int currentOffset = offset;
-
-      /* File entry */
-      if (READ_32(header) == 0x04034b50) {
-        unsigned int version = READ_16(header + 4);
-        unsigned int gpflag = READ_16(header + 6);
-        unsigned int method = READ_16(header + 8);
-        unsigned int filetime = READ_16(header + 10);
-        unsigned int filedate = READ_16(header + 12);
-        unsigned int crc = READ_32(header + 14); /* crc */
-        unsigned int cpsize = READ_32(header + 18); /* compressed size */
-        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
-        unsigned int fnsize = READ_16(header + 26); /* file name length */
-        unsigned int extsize = READ_16(header + 28); /* extra field length */
-        filename[0] = extra[0] = '\0';
-        
-        /* Header */
-        if (fwrite(header, 1, 30, fpOut) == 30) {
-          offset += 30;
-        } else {
-          err = Z_ERRNO;
-          break;
-        }
-        
-        /* Filename */
-        if (fnsize > 0) {
-          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
-            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
-              offset += fnsize;
-            } else {
-              err = Z_ERRNO;
-              break;
-            }
-          } else {
-            err = Z_ERRNO;
-            break;
-          }
-        } else {
-          err = Z_STREAM_ERROR;
-          break;
-        }
-
-        /* Extra field */
-        if (extsize > 0) {
-          if (fread(extra, 1, extsize, fpZip) == extsize) {
-            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
-              offset += extsize;
-            } else {
-              err = Z_ERRNO;
-              break;
-            }
-          } else {
-            err = Z_ERRNO;
-            break;
-          }
-        }
-        
-        /* Data */
-        {
-          int dataSize = cpsize;
-          if (dataSize == 0) {
-            dataSize = uncpsize;
-          }
-          if (dataSize > 0) {
-            char* data = malloc(dataSize);
-            if (data != NULL) {
-              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
-                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
-                  offset += dataSize;
-                  totalBytes += dataSize;
-                } else {
-                  err = Z_ERRNO;
-                }
-              } else {
-                err = Z_ERRNO;
-              }
-              free(data);
-              if (err != Z_OK) {
-                break;
-              }
-            } else {
-              err = Z_MEM_ERROR;
-              break;
-            }
-          }
-        }
-        
-        /* Central directory entry */
-        {
-          char header[46];
-          char* comment = "";
-          int comsize = (int) strlen(comment);
-          WRITE_32(header, 0x02014b50);
-          WRITE_16(header + 4, version);
-          WRITE_16(header + 6, version);
-          WRITE_16(header + 8, gpflag);
-          WRITE_16(header + 10, method);
-          WRITE_16(header + 12, filetime);
-          WRITE_16(header + 14, filedate);
-          WRITE_32(header + 16, crc);
-          WRITE_32(header + 20, cpsize);
-          WRITE_32(header + 24, uncpsize);
-          WRITE_16(header + 28, fnsize);
-          WRITE_16(header + 30, extsize);
-          WRITE_16(header + 32, comsize);
-          WRITE_16(header + 34, 0);     /* disk # */
-          WRITE_16(header + 36, 0);     /* int attrb */
-          WRITE_32(header + 38, 0);     /* ext attrb */
-          WRITE_32(header + 42, currentOffset);
-          /* Header */
-          if (fwrite(header, 1, 46, fpOutCD) == 46) {
-            offsetCD += 46;
-            
-            /* Filename */
-            if (fnsize > 0) {
-              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
-                offsetCD += fnsize;
-              } else {
-                err = Z_ERRNO;
-                break;
-              }
-            } else {
-              err = Z_STREAM_ERROR;
-              break;
-            }
-            
-            /* Extra field */
-            if (extsize > 0) {
-              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
-                offsetCD += extsize;
-              } else {
-                err = Z_ERRNO;
-                break;
-              }
-            }
-            
-            /* Comment field */
-            if (comsize > 0) {
-              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
-                offsetCD += comsize;
-              } else {
-                err = Z_ERRNO;
-                break;
-              }
-            }
-            
-            
-          } else {
-            err = Z_ERRNO;
-            break;
-          }
-        }
-
-        /* Success */
-        entries++;
-
-      } else {
-        break;
-      }
-    }
-
-    /* Final central directory  */
-    {
-      int entriesZip = entries;
-      char header[22];
-      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
-      int comsize = (int) strlen(comment);
-      if (entriesZip > 0xffff) {
-        entriesZip = 0xffff;
-      }
-      WRITE_32(header, 0x06054b50);
-      WRITE_16(header + 4, 0);    /* disk # */
-      WRITE_16(header + 6, 0);    /* disk # */
-      WRITE_16(header + 8, entriesZip);   /* hack */
-      WRITE_16(header + 10, entriesZip);  /* hack */
-      WRITE_32(header + 12, offsetCD);    /* size of CD */
-      WRITE_32(header + 16, offset);      /* offset to CD */
-      WRITE_16(header + 20, comsize);     /* comment */
-      
-      /* Header */
-      if (fwrite(header, 1, 22, fpOutCD) == 22) {
-        
-        /* Comment field */
-        if (comsize > 0) {
-          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
-            err = Z_ERRNO;
-          }
-        }
-        
-      } else {
-        err = Z_ERRNO;
-      }
-    }
-
-    /* Final merge (file + central directory) */
-    fclose(fpOutCD);
-    if (err == Z_OK) {
-      fpOutCD = fopen(fileOutTmp, "rb");
-      if (fpOutCD != NULL) {
-        int nRead;
-        char buffer[8192];
-        while ( (nRead = fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
-          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
-            err = Z_ERRNO;
-            break;
-          }
-        }
-        fclose(fpOutCD);
-      }
-    }
-    
-    /* Close */
-    fclose(fpZip);
-    fclose(fpOut);
-    
-    /* Wipe temporary file */
-    (void)remove(fileOutTmp);
-    
-    /* Number of recovered entries */
-    if (err == Z_OK) {
-      if (nRecovered != NULL) {
-        *nRecovered = entries;
-      }
-      if (bytesRecovered != NULL) {
-        *bytesRecovered = totalBytes;
-      }
-    }
-  } else {
-    err = Z_STREAM_ERROR;
-  }
-  return err;
-}
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#define READ_8(adr)  ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+  WRITE_8((unsigned char*)(buff), n); \
+  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+  int err = Z_OK;
+  FILE* fpZip = fopen(file, "rb");
+  FILE* fpOut = fopen(fileOut, "wb");
+  FILE* fpOutCD = fopen(fileOutTmp, "wb");
+  if (fpZip != NULL &&  fpOut != NULL) {
+    int entries = 0;
+    uLong totalBytes = 0;
+    char header[30];
+    char filename[256];
+    char extra[1024];
+    int offset = 0;
+    int offsetCD = 0;
+    while ( fread(header, 1, 30, fpZip) == 30 ) {
+      int currentOffset = offset;
+
+      /* File entry */
+      if (READ_32(header) == 0x04034b50) {
+        unsigned int version = READ_16(header + 4);
+        unsigned int gpflag = READ_16(header + 6);
+        unsigned int method = READ_16(header + 8);
+        unsigned int filetime = READ_16(header + 10);
+        unsigned int filedate = READ_16(header + 12);
+        unsigned int crc = READ_32(header + 14); /* crc */
+        unsigned int cpsize = READ_32(header + 18); /* compressed size */
+        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+        unsigned int fnsize = READ_16(header + 26); /* file name length */
+        unsigned int extsize = READ_16(header + 28); /* extra field length */
+        filename[0] = extra[0] = '\0';
+        
+        /* Header */
+        if (fwrite(header, 1, 30, fpOut) == 30) {
+          offset += 30;
+        } else {
+          err = Z_ERRNO;
+          break;
+        }
+        
+        /* Filename */
+        if (fnsize > 0) {
+          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+              offset += fnsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        } else {
+          err = Z_STREAM_ERROR;
+          break;
+        }
+
+        /* Extra field */
+        if (extsize > 0) {
+          if (fread(extra, 1, extsize, fpZip) == extsize) {
+            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+              offset += extsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        
+        /* Data */
+        {
+          int dataSize = cpsize;
+          if (dataSize == 0) {
+            dataSize = uncpsize;
+          }
+          if (dataSize > 0) {
+            char* data = malloc(dataSize);
+            if (data != NULL) {
+              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+                  offset += dataSize;
+                  totalBytes += dataSize;
+                } else {
+                  err = Z_ERRNO;
+                }
+              } else {
+                err = Z_ERRNO;
+              }
+              free(data);
+              if (err != Z_OK) {
+                break;
+              }
+            } else {
+              err = Z_MEM_ERROR;
+              break;
+            }
+          }
+        }
+        
+        /* Central directory entry */
+        {
+          char header[46];
+          char* comment = "";
+          int comsize = (int) strlen(comment);
+          WRITE_32(header, 0x02014b50);
+          WRITE_16(header + 4, version);
+          WRITE_16(header + 6, version);
+          WRITE_16(header + 8, gpflag);
+          WRITE_16(header + 10, method);
+          WRITE_16(header + 12, filetime);
+          WRITE_16(header + 14, filedate);
+          WRITE_32(header + 16, crc);
+          WRITE_32(header + 20, cpsize);
+          WRITE_32(header + 24, uncpsize);
+          WRITE_16(header + 28, fnsize);
+          WRITE_16(header + 30, extsize);
+          WRITE_16(header + 32, comsize);
+          WRITE_16(header + 34, 0);     /* disk # */
+          WRITE_16(header + 36, 0);     /* int attrb */
+          WRITE_32(header + 38, 0);     /* ext attrb */
+          WRITE_32(header + 42, currentOffset);
+          /* Header */
+          if (fwrite(header, 1, 46, fpOutCD) == 46) {
+            offsetCD += 46;
+            
+            /* Filename */
+            if (fnsize > 0) {
+              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+                offsetCD += fnsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            } else {
+              err = Z_STREAM_ERROR;
+              break;
+            }
+            
+            /* Extra field */
+            if (extsize > 0) {
+              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+                offsetCD += extsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            /* Comment field */
+            if (comsize > 0) {
+              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+                offsetCD += comsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Success */
+        entries++;
+
+      } else {
+        break;
+      }
+    }
+
+    /* Final central directory  */
+    {
+      int entriesZip = entries;
+      char header[22];
+      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+      int comsize = (int) strlen(comment);
+      if (entriesZip > 0xffff) {
+        entriesZip = 0xffff;
+      }
+      WRITE_32(header, 0x06054b50);
+      WRITE_16(header + 4, 0);    /* disk # */
+      WRITE_16(header + 6, 0);    /* disk # */
+      WRITE_16(header + 8, entriesZip);   /* hack */
+      WRITE_16(header + 10, entriesZip);  /* hack */
+      WRITE_32(header + 12, offsetCD);    /* size of CD */
+      WRITE_32(header + 16, offset);      /* offset to CD */
+      WRITE_16(header + 20, comsize);     /* comment */
+      
+      /* Header */
+      if (fwrite(header, 1, 22, fpOutCD) == 22) {
+        
+        /* Comment field */
+        if (comsize > 0) {
+          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+            err = Z_ERRNO;
+          }
+        }
+        
+      } else {
+        err = Z_ERRNO;
+      }
+    }
+
+    /* Final merge (file + central directory) */
+    fclose(fpOutCD);
+    if (err == Z_OK) {
+      fpOutCD = fopen(fileOutTmp, "rb");
+      if (fpOutCD != NULL) {
+        int nRead;
+        char buffer[8192];
+        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        fclose(fpOutCD);
+      }
+    }
+    
+    /* Close */
+    fclose(fpZip);
+    fclose(fpOut);
+    
+    /* Wipe temporary file */
+    (void)remove(fileOutTmp);
+    
+    /* Number of recovered entries */
+    if (err == Z_OK) {
+      if (nRecovered != NULL) {
+        *nRecovered = entries;
+      }
+      if (bytesRecovered != NULL) {
+        *bytesRecovered = totalBytes;
+      }
+    }
+  } else {
+    err = Z_STREAM_ERROR;
+  }
+  return err;
+}
--- a/contrib/minizip/mztools.h
+++ b/contrib/minizip/mztools.h
@@ -1,31 +1,31 @@
-/*
-  Additional tools for Minizip
-  Code: Xavier Roche '2004
-  License: Same as ZLIB (www.gzip.org)
-*/
-
-#ifndef _zip_tools_H
-#define _zip_tools_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef _ZLIB_H
-#include "zlib.h"
-#endif
-
-#include "unzip.h"
-
-/* Repair a ZIP file (missing central directory) 
-   file: file to recover
-   fileOut: output file after recovery
-   fileOutTmp: temporary file name used for recovery
-*/
-extern int ZEXPORT unzRepair(const char* file, 
-                             const char* fileOut, 
-                             const char* fileOutTmp, 
-                             uLong* nRecovered,
-                             uLong* bytesRecovered);
-
-#endif
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory) 
+   file: file to recover
+   fileOut: output file after recovery
+   fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file, 
+                             const char* fileOut, 
+                             const char* fileOutTmp, 
+                             uLong* nRecovered,
+                             uLong* bytesRecovered);
+
+#endif
--- a/contrib/minizip/unzip.c
+++ b/contrib/minizip/unzip.c
--- a/contrib/minizip/unzip.h
+++ b/contrib/minizip/unzip.h
@@ -1,18 +1,20 @@
 /* unzip.h -- IO for uncompress .zip files using zlib
-   Version 1.01, May 8th, 2004
+   Version 1.1, January 7th, 2010
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Copyright (C) 1998-2004 Gilles Vollant
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )

-   This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
-     WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
-   Old compressions used by old PKZip 1.x are not supported
+	 Modifications of Unzip for Zip64
+	 Copyright (C) 2007-2008 Even Rouault

+	 Modifications for Zip64 support on both zip and unzip
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )

-   I WAIT FEEDBACK at mail info@winimage.com
-   Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
+	 For more info read MiniZip_info.txt

-   Condition of use and distribution are the same than zlib :
+	 ---------------------------------------------------------------------------------
+ 
+	Condition of use and distribution are the same than zlib :

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
@@ -30,18 +32,16 @@
     misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.

+  ---------------------------------------------------------------------------------
+
+	Changes
+
+	See header of unzip64.c 

 */

-/* for more info about .ZIP format, see
-      http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
-      http://www.info-zip.org/pub/infozip/doc/
-   PkWare has also a specification at :
-      ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _unz_H
-#define _unz_H
+#ifndef _unz64_H
+#define _unz64_H

 #ifdef __cplusplus
 extern "C" {
@@ -51,10 +51,16 @@ extern "C" {
 #include "zlib.h"
 #endif

-#ifndef _ZLIBIOAPI_H
+#ifndef  _ZLIBIOAPI_H
 #include "ioapi.h"
 #endif

+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
 #if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
 /* like the STRICT of WIN32, we define a pointer that cannot be converted
    from (void*) without cast */
@@ -87,15 +93,42 @@ typedef struct tm_unz_s

 /* unz_global_info structure contain global data about the ZIPfile
   These data comes from the end of central dir */
+typedef struct unz_global_info64_s
+{
+    ZPOS64_T number_entry;         /* total number of entries in
+                                     the central dir on this disk */
+    uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info64;
+
 typedef struct unz_global_info_s
 {
    uLong number_entry;         /* total number of entries in
-                       the central dir on this disk */
+                                     the central dir on this disk */
    uLong size_comment;         /* size of the global comment of the zipfile */
 } unz_global_info;

-
 /* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info64_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    ZPOS64_T compressed_size;   /* compressed size                 8 bytes */
+    ZPOS64_T uncompressed_size; /* uncompressed size               8 bytes */
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info64;
+
 typedef struct unz_file_info_s
 {
    uLong version;              /* version made by                 2 bytes */
@@ -131,6 +164,7 @@ extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,


 extern unzFile ZEXPORT unzOpen OF((const char *path));
+extern unzFile ZEXPORT unzOpen64 OF((const void *path));
 /*
  Open a Zip file. path contain the full pathname (by example,
     on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
@@ -139,8 +173,14 @@ extern unzFile ZEXPORT unzOpen OF((const char *path));
       return value is NULL.
     Else, the return value is a unzFile Handle, usable with other function
       of this unzip package.
+     the "64" function take a const void* pointer, because the path is just the
+       value passed to the open64_file_func callback.
+     Under Windows, if UNICODE is defined, using fill_fopen64_filefunc, the path
+       is a pointer to a wide unicode string (LPCTSTR is LPCWSTR), so const char*
+       does not describe the reality
 */

+
 extern unzFile ZEXPORT unzOpen2 OF((const char *path,
                                    zlib_filefunc_def* pzlib_filefunc_def));
 /*
@@ -148,6 +188,13 @@ extern unzFile ZEXPORT unzOpen2 OF((const char *path,
      for read/write the zip file (see ioapi.h)
 */

+extern unzFile ZEXPORT unzOpen2_64 OF((const void *path,
+                                    zlib_filefunc64_def* pzlib_filefunc_def));
+/*
+   Open a Zip file, like unz64Open, but provide a set of file low level API
+      for read/write the zip file (see ioapi.h)
+*/
+
 extern int ZEXPORT unzClose OF((unzFile file));
 /*
  Close a ZipFile opened with unzipOpen.
@@ -157,6 +204,9 @@ extern int ZEXPORT unzClose OF((unzFile file));

 extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
                                        unz_global_info *pglobal_info));
+
+extern int ZEXPORT unzGetGlobalInfo64 OF((unzFile file,
+                                        unz_global_info64 *pglobal_info));
 /*
  Write info about the ZipFile in the *pglobal_info structure.
  No preparation of the structure is needed
@@ -219,8 +269,31 @@ extern int ZEXPORT unzGoToFilePos(
    unzFile file,
    unz_file_pos* file_pos);

+typedef struct unz64_file_pos_s
+{
+    ZPOS64_T pos_in_zip_directory;   /* offset in zip file directory */
+    ZPOS64_T num_of_file;            /* # of file */
+} unz64_file_pos;
+
+extern int ZEXPORT unzGetFilePos64(
+    unzFile file,
+    unz64_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos64(
+    unzFile file,
+    const unz64_file_pos* file_pos);
+
 /* ****************************************** */

+extern int ZEXPORT unzGetCurrentFileInfo64 OF((unzFile file,
+                         unz_file_info64 *pfile_info,
+                         char *szFileName,
+                         uLong fileNameBufferSize,
+                         void *extraField,
+                         uLong extraFieldBufferSize,
+                         char *szComment,
+                         uLong commentBufferSize));
+
 extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
                         unz_file_info *pfile_info,
                         char *szFileName,
@@ -242,6 +315,14 @@ extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
            (commentBufferSize is the size of the buffer)
 */

+
+/** Addition for GDAL : START */
+
+extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file));
+
+/** Addition for GDAL : END */
+
+
 /***************************************************************************/
 /* for reading the content of the current zipfile, you can open it, read data
   from it, and close it (you can close it before reading all the file)
@@ -310,6 +391,8 @@ extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
 */

 extern z_off_t ZEXPORT unztell OF((unzFile file));
+
+extern ZPOS64_T ZEXPORT unztell64 OF((unzFile file));
 /*
  Give the current position in uncompressed data
 */
@@ -338,9 +421,11 @@ extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
 /***************************************************************************/

 /* Get the current file offset */
+extern ZPOS64_T ZEXPORT unzGetOffset64 (unzFile file);
 extern uLong ZEXPORT unzGetOffset (unzFile file);

 /* Set the current file offset */
+extern int ZEXPORT unzSetOffset64 (unzFile file, ZPOS64_T pos);
 extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);


@@ -349,4 +434,4 @@ extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
 }
 #endif

-#endif /* _unz_H */
+#endif /* _unz64_H */
--- a/contrib/minizip/zconf.h
+++ b/contrib/minizip/zconf.h
@@ -0,0 +1,332 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ */
+#ifdef Z_PREFIX
+#  define deflateInit_          z_deflateInit_
+#  define deflate               z_deflate
+#  define deflateEnd            z_deflateEnd
+#  define inflateInit_          z_inflateInit_
+#  define inflate               z_inflate
+#  define inflateEnd            z_inflateEnd
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateCopy           z_deflateCopy
+#  define deflateReset          z_deflateReset
+#  define deflateParams         z_deflateParams
+#  define deflateBound          z_deflateBound
+#  define deflatePrime          z_deflatePrime
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateCopy           z_inflateCopy
+#  define inflateReset          z_inflateReset
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define compress              z_compress
+#  define compress2             z_compress2
+#  define compressBound         z_compressBound
+#  define uncompress            z_uncompress
+#  define adler32               z_adler32
+#  define crc32                 z_crc32
+#  define get_crc_table         z_get_crc_table
+#  define zError                z_zError
+
+#  define alloc_func            z_alloc_func
+#  define free_func             z_free_func
+#  define in_func               z_in_func
+#  define out_func              z_out_func
+#  define Byte                  z_Byte
+#  define uInt                  z_uInt
+#  define uLong                 z_uLong
+#  define Bytef                 z_Bytef
+#  define charf                 z_charf
+#  define intf                  z_intf
+#  define uIntf                 z_uIntf
+#  define uLongf                z_uLongf
+#  define voidpf                z_voidpf
+#  define voidp                 z_voidp
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if 0           /* HAVE_UNISTD_H -- this line is updated by ./configure */
+#  include <sys/types.h> /* for off_t */
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#  ifdef VMS
+#    include <unixio.h>   /* for off_t */
+#  endif
+#  define z_off_t off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if defined(__OS400__)
+#  define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+#  define NO_vsnprintf
+#  ifdef FAR
+#    undef FAR
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+#   pragma map(deflateInit_,"DEIN")
+#   pragma map(deflateInit2_,"DEIN2")
+#   pragma map(deflateEnd,"DEEND")
+#   pragma map(deflateBound,"DEBND")
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(compressBound,"CMBND")
+#   pragma map(inflate_table,"INTABL")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
--- a/contrib/minizip/zconf.in.h
+++ b/contrib/minizip/zconf.in.h
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2004 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -43,6 +43,10 @@
 #  define get_crc_table         z_get_crc_table
 #  define zError                z_zError

+#  define alloc_func            z_alloc_func
+#  define free_func             z_free_func
+#  define in_func               z_in_func
+#  define out_func              z_out_func
 #  define Byte                  z_Byte
 #  define uInt                  z_uInt
 #  define uLong                 z_uLong
@@ -64,8 +68,10 @@
 #if defined(_WINDOWS) && !defined(WINDOWS)
 #  define WINDOWS
 #endif
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-#  define WIN32
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
 #endif
 #if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
 #  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
--- a/contrib/minizip/zip.c
+++ b/contrib/minizip/zip.c
--- a/contrib/minizip/zip.h
+++ b/contrib/minizip/zip.h
@@ -1,18 +1,15 @@
-/* zip.h -- IO for compress .zip files using zlib
-   Version 1.01, May 8th, 2004
+/* zip.h -- IO on .zip files using zlib
+   Version 1.1, January 7th, 2010
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )

-   Copyright (C) 1998-2004 Gilles Vollant
+	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )

-   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
-     WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
-   Old compressions used by old PKZip 1.x are not supported
+	 Modifications for Zip64 support
+	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )

-  For uncompress .zip file, look at unzip.h
+	 For more info read MiniZip_info.txt

-
-   I WAIT FEEDBACK at mail info@winimage.com
-   Visit also http://www.winimage.com/zLibDll/unzip.html for evolution
+	 ---------------------------------------------------------------------------

   Condition of use and distribution are the same than zlib :

@@ -32,23 +29,23 @@
     misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.

+	---------------------------------------------------------------------------
+
+	Changes 
+
+	See header of zip.h

 */

-/* for more info about .ZIP format, see
-      http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
-      http://www.info-zip.org/pub/infozip/doc/
-   PkWare has also a specification at :
-      ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _zip_H
-#define _zip_H
+#ifndef _zip12_H
+#define _zip12_H

 #ifdef __cplusplus
 extern "C" {
 #endif

+//#define HAVE_BZIP2
+
 #ifndef _ZLIB_H
 #include "zlib.h"
 #endif
@@ -57,6 +54,12 @@ extern "C" {
 #include "ioapi.h"
 #endif

+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
 #if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
 /* like the STRICT of WIN32, we define a pointer that cannot be converted
    from (void*) without cast */
@@ -111,6 +114,7 @@ typedef const char* zipcharpc;
 #define APPEND_STATUS_ADDINZIP      (2)

 extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append));
 /*
  Create a zipfile.
     pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
@@ -135,6 +139,11 @@ extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
                                   zipcharpc* globalcomment,
                                   zlib_filefunc_def* pzlib_filefunc_def));

+extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname,
+                                   int append,
+                                   zipcharpc* globalcomment,
+                                   zlib_filefunc64_def* pzlib_filefunc_def));
+
 extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
                       const char* filename,
                       const zip_fileinfo* zipfi,
@@ -145,6 +154,19 @@ extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
                       const char* comment,
                       int method,
                       int level));
+
+extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file,
+                       const char* filename,
+                       const zip_fileinfo* zipfi,
+                       const void* extrafield_local,
+                       uInt size_extrafield_local,
+                       const void* extrafield_global,
+                       uInt size_extrafield_global,
+                       const char* comment,
+                       int method,
+                       int level,
+                       int zip64));
+
 /*
  Open a file in the ZIP for writing.
  filename : the filename in zip (if NULL, '-' without quote will be used
@@ -156,6 +178,9 @@ extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
  if comment != NULL, comment contain the comment string
  method contain the compression method (0 for store, Z_DEFLATED for deflate)
  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+  zip64 is set to 1 if a zip64 extended information block should be added to the local file header.
+                    this MUST be '1' if the uncompressed size is >= 0xffffffff.
+
 */


@@ -171,6 +196,19 @@ extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
                                            int level,
                                            int raw));

+
+extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int zip64));
 /*
  Same than zipOpenNewFileInZip, except if raw=1, we write raw file
 */
@@ -190,13 +228,79 @@ extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
                                            int memLevel,
                                            int strategy,
                                            const char* password,
-                                            uLong crcForCtypting));
+                                            uLong crcForCrypting));
+
+extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            int zip64
+                                            ));

 /*
  Same than zipOpenNewFileInZip2, except
    windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
    password : crypting password (NULL for no crypting)
-    crcForCtypting : crc of file to compress (needed for crypting)
+    crcForCrypting : crc of file to compress (needed for crypting)
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            uLong versionMadeBy,
+                                            uLong flagBase
+                                            ));
+
+
+extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            uLong versionMadeBy,
+                                            uLong flagBase,
+                                            int zip64
+                                            ));
+/*
+  Same than zipOpenNewFileInZip4, except
+    versionMadeBy : value for Version made by field
+    flag : value for flag field (compression level info will be added)
 */


@@ -215,8 +319,13 @@ extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
 extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
                                            uLong uncompressed_size,
                                            uLong crc32));
+
+extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file,
+                                            ZPOS64_T uncompressed_size,
+                                            uLong crc32));
+
 /*
-  Close the current file in the zipfile, for fiel opened with
+  Close the current file in the zipfile, for file opened with
    parameter raw=1 in zipOpenNewFileInZip2
  uncompressed_size and crc32 are value for the uncompressed size
 */
@@ -227,8 +336,27 @@ extern int ZEXPORT zipClose OF((zipFile file,
  Close the zipfile
 */

+
+extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader));
+/* 
+  zipRemoveExtraInfoBlock -  Added by Mathias Svensson 
+  
+  Remove extra information block from a extra information data for the local file header or central directory header
+
+  It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode.
+  
+  0x0001 is the signature header for the ZIP64 extra information blocks
+
+  usage.
+			Remove ZIP64 Extra information from a central director extra field data
+	      zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001);
+
+			Remove ZIP64 Extra information from a Local File Header extra field data
+        zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001);
+*/
+
 #ifdef __cplusplus
 }
 #endif

-#endif /* _zip_H */
+#endif /* _zip64_H */
--- a/contrib/pascal/zlibd32.mak
+++ b/contrib/pascal/zlibd32.mak
@@ -18,10 +18,10 @@ LDFLAGS =
 # variables
 ZLIB_LIB = zlib.lib

-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
-OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
-OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzio.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzio.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj


 # targets
@@ -38,8 +38,16 @@ crc32.obj: crc32.c zlib.h zconf.h crc32.h

 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h

+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
 gzio.obj: gzio.c zutil.h zlib.h zconf.h

+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
 infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
 inffast.h inffixed.h

--- a/contrib/pascal/zlibpas.pas
+++ b/contrib/pascal/zlibpas.pas
@@ -10,7 +10,7 @@ unit zlibpas;
 interface

 const
-  ZLIB_VERSION = '1.2.2';
+  ZLIB_VERSION = '1.2.3';

 type
  alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
--- a/contrib/puff/puff
+++ b/contrib/puff/puff
--- a/contrib/puff/puff.c
+++ b/contrib/puff/puff.c
@@ -1,8 +1,8 @@
 /*
 * puff.c
- * Copyright (C) 2002-2004 Mark Adler
+ * Copyright (C) 2002-2008 Mark Adler
 * For conditions of distribution and use, see copyright notice in puff.h
- * version 1.8, 9 Jan 2004
+ * version 2.0, 25 Jul 2008
 *
 * puff.c is a simple inflate written to be an unambiguous way to specify the
 * deflate format.  It is not written for speed but rather simplicity.  As a
@@ -61,6 +61,12 @@
 * 1.7   3 Mar 2003     - Added test code for distribution
 *                      - Added zlib-like license
 * 1.8   9 Jan 2004     - Added some comments on no distance codes case
+ * 1.9  21 Feb 2008     - Fix bug on 16-bit integer architectures [Pohland]
+ *                      - Catch missing end-of-block symbol error
+ * 2.0  25 Jul 2008     - Add #define to permit distance too far back
+ *                      - Add option in TEST code for puff to write the data
+ *                      - Add option in TEST code to skip input bytes
+ *                      - Allow TEST code to read from piped stdin
 */

 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
@@ -194,7 +200,7 @@ struct huffman {
 * Decode a code from the stream s using huffman table h.  Return the symbol or
 * a negative value if there is an error.  If all of the lengths are zero, i.e.
 * an empty code, or if the code is incomplete and an invalid code is received,
- * then -9 is returned after reading MAXBITS bits.
+ * then -10 is returned after reading MAXBITS bits.
 *
 * Format notes:
 *
@@ -226,14 +232,14 @@ local int decode(struct state *s, struct huffman *h)
    for (len = 1; len <= MAXBITS; len++) {
        code |= bits(s, 1);             /* get next bit */
        count = h->count[len];
-        if (code < first + count)       /* if length len, return symbol */
+        if (code - count < first)       /* if length len, return symbol */
            return h->symbol[index + (code - first)];
        index += count;                 /* else update for next length */
        first += count;
        first <<= 1;
        code <<= 1;
    }
-    return -9;                          /* ran out of codes */
+    return -10;                         /* ran out of codes */
 }

 /*
@@ -263,7 +269,7 @@ local int decode(struct state *s, struct huffman *h)
            code |= bitbuf & 1;
            bitbuf >>= 1;
            count = *next++;
-            if (code < first + count) { /* if length len, return symbol */
+            if (code - count < first) { /* if length len, return symbol */
                s->bitbuf = bitbuf;
                s->bitcnt = (s->bitcnt - len) & 7;
                return h->symbol[index + (code - first)];
@@ -280,7 +286,7 @@ local int decode(struct state *s, struct huffman *h)
        bitbuf = s->in[s->incnt++];
        if (left > 8) left = 8;
    }
-    return -9;                          /* ran out of codes */
+    return -10;                         /* ran out of codes */
 }
 #endif /* SLOW */

@@ -448,21 +454,27 @@ local int codes(struct state *s,
        else if (symbol > 256) {        /* length */
            /* get and compute length */
            symbol -= 257;
-            if (symbol >= 29) return -9;        /* invalid fixed code */
+            if (symbol >= 29) return -10;       /* invalid fixed code */
            len = lens[symbol] + bits(s, lext[symbol]);

            /* get and check distance */
            symbol = decode(s, distcode);
            if (symbol < 0) return symbol;      /* invalid symbol */
            dist = dists[symbol] + bits(s, dext[symbol]);
+#ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
            if (dist > s->outcnt)
-                return -10;     /* distance too far back */
+                return -11;     /* distance too far back */
+#endif

            /* copy length bytes from distance bytes back */
            if (s->out != NIL) {
                if (s->outcnt + len > s->outlen) return 1;
                while (len--) {
-                    s->out[s->outcnt] = s->out[s->outcnt - dist];
+                    s->out[s->outcnt] =
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        dist > s->outcnt ? 0 :
+#endif
+                        s->out[s->outcnt - dist];
                    s->outcnt++;
                }
            }
@@ -680,6 +692,10 @@ local int dynamic(struct state *s)
        }
    }

+    /* check for end-of-block code -- there better be one! */
+    if (lengths[256] == 0)
+        return -9;
+
    /* build huffman table for literal/length codes */
    err = construct(&lencode, lengths, nlen);
    if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
@@ -724,8 +740,9 @@ local int dynamic(struct state *s)
 *  -6:  dynamic block code description: repeat more than specified lengths
 *  -7:  dynamic block code description: invalid literal/length code lengths
 *  -8:  dynamic block code description: invalid distance code lengths
- *  -9:  invalid literal/length or distance code in fixed or dynamic block
- * -10:  distance is too far back in fixed or dynamic block
+ *  -9:  dynamic block code description: missing end-of-block code
+ * -10:  invalid literal/length or distance code in fixed or dynamic block
+ * -11:  distance is too far back in fixed or dynamic block
 *
 * Format notes:
 *
@@ -783,54 +800,142 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
 }

 #ifdef TEST
-/* Example of how to use puff() */
+/* Examples of how to use puff().
+
+   Usage: puff [-w] [-nnn] file
+          ... | puff [-w] [-nnn]
+
+   where file is the input file with deflate data, nnn is the number of bytes
+   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+   -w is used to write the decompressed data to stdout */
+
 #include <stdio.h>
 #include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>

-local unsigned char *yank(char *name, unsigned long *len)
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+   3, or 5 times a power of 2 -- the result is always > size, until the result
+   is the maximum value of an unsigned long, where it remains.  This is useful
+   to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
 {
-    unsigned long size;
-    unsigned char *buf;
+    int n;
+    size_t m;
+
+    m = size;
+    for (n = 0; m; n++)
+        m >>= 1;
+    if (n < 3)
+        return size + 1;
+    n -= 3;
+    m = size >> n;
+    m += m == 6 ? 2 : 1;
+    m <<= n;
+    return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+   Reallocate to larger buffers until the entire file is read in.  Return a
+   pointer to the allocated data, or NULL if there was a memory allocation
+   failure.  *len is the number of bytes of data read from the input file (even
+   if load() returns NULL).  If the input file was empty or could not be opened
+   or read, *len is zero. */
+local void *load(char *name, size_t *len)
+{
+    size_t size;
+    void *buf, *swap;
    FILE *in;
-    struct stat s;

    *len = 0;
-    if (stat(name, &s)) return NULL;
-    if ((s.st_mode & S_IFMT) != S_IFREG) return NULL;
-    size = (unsigned long)(s.st_size);
-    if (size == 0 || (off_t)size != s.st_size) return NULL;
-    in = fopen(name, "r");
-    if (in == NULL) return NULL;
-    buf = malloc(size);
-    if (buf != NULL && fread(buf, 1, size, in) != size) {
-        free(buf);
-        buf = NULL;
+    buf = malloc(size = 4096);
+    if (buf == NULL)
+        return NULL;
+    in = name == NULL ? stdin : fopen(name, "rb");
+    if (in != NULL) {
+        for (;;) {
+            *len += fread((char *)buf + *len, 1, size - *len, in);
+            if (*len < size) break;
+            size = bythirds(size);
+            if (size == *len || (swap = realloc(buf, size)) == NULL) {
+                free(buf);
+                buf = NULL;
+                break;
+            }
+            buf = swap;
+        }
+        fclose(in);
    }
-    fclose(in);
-    *len = size;
    return buf;
 }

 int main(int argc, char **argv)
 {
-    int ret;
-    unsigned char *source;
-    unsigned long len, sourcelen, destlen;
+    int ret, skip = 0, put = 0;
+    char *arg, *name = NULL;
+    unsigned char *source = NULL, *dest;
+    size_t len = 0;
+    unsigned long sourcelen, destlen;

-    if (argc < 2) return 2;
-    source = yank(argv[1], &len);
-    if (source == NULL) return 2;
-    sourcelen = len;
-    ret = puff(NIL, &destlen, source, &sourcelen);
-    if (ret)
-        printf("puff() failed with return code %d\n", ret);
-    else {
-        printf("puff() succeeded uncompressing %lu bytes\n", destlen);
-        if (sourcelen < len) printf("%lu compressed bytes unused\n",
-                                    len - sourcelen);
+    /* process arguments */
+    while (arg = *++argv, --argc)
+        if (arg[0] == '-') {
+            if (arg[1] == 'w' && arg[2] == 0)
+                put = 1;
+            else if (arg[1] >= '0' && arg[1] <= '9')
+                skip = atoi(arg + 1);
+            else {
+                fprintf(stderr, "invalid option %s\n", arg);
+                return 3;
+            }
+        }
+        else if (name != NULL) {
+            fprintf(stderr, "only one file name allowed\n");
+            return 3;
+        }
+        else
+            name = arg;
+    source = load(name, &len);
+    if (source == NULL) {
+        fprintf(stderr, "memory allocation failure\n");
+        return 4;
    }
+    if (len == 0) {
+        fprintf(stderr, "could not read %s, or it was empty\n",
+                name == NULL ? "<stdin>" : name);
+        free(source);
+        return 3;
+    }
+    if (skip >= len) {
+        fprintf(stderr, "skip request of %d leaves no input\n", skip);
+        free(source);
+        return 3;
+    }
+
+    /* test inflate data with offset skip */
+    len -= skip;
+    sourcelen = (unsigned long)len;
+    ret = puff(NIL, &destlen, source + skip, &sourcelen);
+    if (ret)
+        fprintf(stderr, "puff() failed with return code %d\n", ret);
+    else {
+        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+                                     len - sourcelen);
+    }
+
+    /* if requested, inflate again and write decompressd data to stdout */
+    if (put) {
+        dest = malloc(destlen);
+        if (dest == NULL) {
+            fprintf(stderr, "memory allocation failure\n");
+            free(source);
+            return 4;
+        }
+        puff(dest, &destlen, source + skip, &sourcelen);
+        fwrite(dest, 1, destlen, stdout);
+        free(dest);
+    }
+
+    /* clean up */
    free(source);
    return ret;
 }
--- a/contrib/puff/puff.h
+++ b/contrib/puff/puff.h
@@ -1,6 +1,6 @@
 /* puff.h
-  Copyright (C) 2002, 2003 Mark Adler, all rights reserved
-  version 1.7, 3 Mar 2002
+  Copyright (C) 2002-2008 Mark Adler, all rights reserved
+  version 1.9, 10 Jan 2008

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the author be held liable for any damages
--- a/contrib/testzlib/testzlib.c
+++ b/contrib/testzlib/testzlib.c
@@ -1,149 +1,275 @@
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <windows.h>
-#include "zlib.h"
-
-int ReadFileMemory(const char* filename,long* plFileSize,void** pFilePtr)
-{
-    FILE* stream;
-    void* ptr;
-    int retVal=1;
-    stream=fopen(filename, "rb");
-    if (stream==NULL)
-        return 0;
-
-    fseek(stream,0,SEEK_END);
-
-    *plFileSize=ftell(stream);
-    fseek(stream,0,SEEK_SET);
-    ptr=malloc((*plFileSize)+1);
-    if (ptr==NULL)
-        retVal=0;
-    else
-    {
-        if (fread(ptr, 1, *plFileSize,stream) != (*plFileSize))
-            retVal=0;
-    }
-    fclose(stream);
-    *pFilePtr=ptr;
-    return retVal;
-}
-
-int main(int argc, char *argv[])
-{
-    int BlockSizeCompress=0x8000;
-    int BlockSizeUncompress=0x8000;
-    int cprLevel=Z_DEFAULT_COMPRESSION ;
-    long lFileSize;
-    unsigned char* FilePtr;
-    long lBufferSizeCpr;
-    long lBufferSizeUncpr;
-    long lCompressedSize=0;
-    unsigned char* CprPtr;
-    unsigned char* UncprPtr;
-    long lSizeCpr,lSizeUncpr;
-    DWORD dwGetTick;
-
-    if (argc<=1)
-    {
-        printf("run TestZlib <File> [BlockSizeCompress] [BlockSizeUncompress] [compres. level]\n");
-        return 0;
-    }
-
-    if (ReadFileMemory(argv[1],&lFileSize,&FilePtr)==0)
-    {
-        printf("error reading %s\n",argv[1]);
-        return 1;
-    }
-    else printf("file %s read, %u bytes\n",argv[1],lFileSize);
-
-    if (argc>=3)
-        BlockSizeCompress=atol(argv[2]);
-
-    if (argc>=4)
-        BlockSizeUncompress=atol(argv[3]);
-
-    if (argc>=5)
-        cprLevel=(int)atol(argv[4]);
-
-    lBufferSizeCpr = lFileSize + (lFileSize/0x10) + 0x200;
-    lBufferSizeUncpr = lBufferSizeCpr;
-
-    CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress);
-    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
-
-    dwGetTick=GetTickCount();
-    {
-        z_stream zcpr;
-        int ret=Z_OK;
-        long lOrigToDo = lFileSize;
-        long lOrigDone = 0;
-        int step=0;
-        memset(&zcpr,0,sizeof(z_stream));
-        deflateInit(&zcpr,cprLevel);
-
-        zcpr.next_in = FilePtr;
-        zcpr.next_out = CprPtr;
-
-
-        do
-        {
-            long all_read_before = zcpr.total_in;
-            zcpr.avail_in = min(lOrigToDo,BlockSizeCompress);
-            zcpr.avail_out = BlockSizeCompress;
-            ret=deflate(&zcpr,(zcpr.avail_in==lOrigToDo) ? Z_FINISH : Z_SYNC_FLUSH);
-            lOrigDone += (zcpr.total_in-all_read_before);
-            lOrigToDo -= (zcpr.total_in-all_read_before);
-            step++;
-        } while (ret==Z_OK);
-
-        lSizeCpr=zcpr.total_out;
-        deflateEnd(&zcpr);
-        dwGetTick=GetTickCount()-dwGetTick;
-        printf("total compress size = %u, in %u step\n",lSizeCpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
-    }
-
-    dwGetTick=GetTickCount();
-    {
-        z_stream zcpr;
-        int ret=Z_OK;
-        long lOrigToDo = lSizeCpr;
-        long lOrigDone = 0;
-        int step=0;
-        memset(&zcpr,0,sizeof(z_stream));
-        inflateInit(&zcpr);
-
-        zcpr.next_in = CprPtr;
-        zcpr.next_out = UncprPtr;
-
-
-        do
-        {
-            long all_read_before = zcpr.total_in;
-            zcpr.avail_in = min(lOrigToDo,BlockSizeUncompress);
-            zcpr.avail_out = BlockSizeUncompress;
-            ret=inflate(&zcpr,Z_SYNC_FLUSH);
-            lOrigDone += (zcpr.total_in-all_read_before);
-            lOrigToDo -= (zcpr.total_in-all_read_before);
-            step++;
-        } while (ret==Z_OK);
-
-        lSizeUncpr=zcpr.total_out;
-        inflateEnd(&zcpr);
-        dwGetTick=GetTickCount()-dwGetTick;
-        printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
-    }
-
-    if (lSizeUncpr==lFileSize)
-    {
-        if (memcmp(FilePtr,UncprPtr,lFileSize)==0)
-            printf("compare ok\n");
-
-    }
-
-    return 0;
-
-}
+#include <stdio.h>
+#include <stdlib.h>
+#include <windows.h>
+
+#include "zlib.h"
+
+
+void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B)
+{
+    R->HighPart = A.HighPart - B.HighPart;
+    if (A.LowPart >= B.LowPart)
+        R->LowPart = A.LowPart - B.LowPart;
+    else
+    {
+        R->LowPart = A.LowPart - B.LowPart;
+        R->HighPart --;
+    }
+}
+
+#ifdef _M_X64
+// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc
+unsigned __int64 __rdtsc(void);
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ //   printf("rdtsc = %I64x\n",__rdtsc());
+   pbeginTime64->QuadPart=__rdtsc();
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres;
+    unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart));
+    LIres.QuadPart=res;
+   // printf("rdtsc = %I64x\n",__rdtsc());
+    return LIres;
+}
+#else
+#ifdef _M_IX86
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+    DWORD dwEdx,dwEax;
+    _asm
+    {
+        rdtsc
+        mov dwEax,eax
+        mov dwEdx,edx
+    }
+    pbeginTime64->LowPart=dwEax;
+    pbeginTime64->HighPart=dwEdx;
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+    myGetRDTSC32(pbeginTime64);
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres,endTime64;
+    myGetRDTSC32(&endTime64);
+
+    LIres.LowPart=LIres.HighPart=0;
+    MyDoMinus64(&LIres,endTime64,beginTime64);
+    return LIres;
+}
+#else
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER lr;
+    lr.QuadPart=0;
+    return lr;
+}
+#endif
+#endif
+
+void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf)
+{
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64)))
+    {
+        pbeginTime64->LowPart = GetTickCount();
+        pbeginTime64->HighPart = 0;
+    }
+}
+
+DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER endTime64,ticksPerSecond,ticks;
+    DWORDLONG ticksShifted,tickSecShifted;
+    DWORD dwLog=16+0;
+    DWORD dwRet;
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64)))
+        dwRet = (GetTickCount() - beginTime64.LowPart)*1;
+    else
+    {
+        MyDoMinus64(&ticks,endTime64,beginTime64);
+        QueryPerformanceFrequency(&ticksPerSecond);
+
+    
+        {
+            ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog);
+            tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog);
+        
+        } 
+
+        dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted));
+        dwRet *=1;
+    }
+    return dwRet;
+}
+
+int ReadFileMemory(const char* filename,long* plFileSize,void** pFilePtr)
+{
+    FILE* stream;
+    void* ptr;
+    int retVal=1;
+    stream=fopen(filename, "rb");
+    if (stream==NULL)
+        return 0;
+
+    fseek(stream,0,SEEK_END);
+
+    *plFileSize=ftell(stream);
+    fseek(stream,0,SEEK_SET);
+    ptr=malloc((*plFileSize)+1);
+    if (ptr==NULL)
+        retVal=0;
+    else
+    {
+        if (fread(ptr, 1, *plFileSize,stream) != (*plFileSize))
+            retVal=0;
+    }
+    fclose(stream);
+    *pFilePtr=ptr;
+    return retVal;
+}
+
+int main(int argc, char *argv[])
+{
+    int BlockSizeCompress=0x8000;
+    int BlockSizeUncompress=0x8000;
+    int cprLevel=Z_DEFAULT_COMPRESSION ;
+    long lFileSize;
+    unsigned char* FilePtr;
+    long lBufferSizeCpr;
+    long lBufferSizeUncpr;
+    long lCompressedSize=0;
+    unsigned char* CprPtr;
+    unsigned char* UncprPtr;
+    long lSizeCpr,lSizeUncpr;
+    DWORD dwGetTick,dwMsecQP;
+    LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc;
+
+    if (argc<=1)
+    {
+        printf("run TestZlib <File> [BlockSizeCompress] [BlockSizeUncompress] [compres. level]\n");
+        return 0;
+    }
+
+    if (ReadFileMemory(argv[1],&lFileSize,&FilePtr)==0)
+    {
+        printf("error reading %s\n",argv[1]);
+        return 1;
+    }
+    else printf("file %s read, %u bytes\n",argv[1],lFileSize);
+
+    if (argc>=3)
+        BlockSizeCompress=atol(argv[2]);
+
+    if (argc>=4)
+        BlockSizeUncompress=atol(argv[3]);
+
+    if (argc>=5)
+        cprLevel=(int)atol(argv[4]);
+
+    lBufferSizeCpr = lFileSize + (lFileSize/0x10) + 0x200;
+    lBufferSizeUncpr = lBufferSizeCpr;
+
+    CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress);
+
+    BeginCountPerfCounter(&li_qp,TRUE);
+    dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
+    {
+        z_stream zcpr;
+        int ret=Z_OK;
+        long lOrigToDo = lFileSize;
+        long lOrigDone = 0;
+        int step=0;
+        memset(&zcpr,0,sizeof(z_stream));
+        deflateInit(&zcpr,cprLevel);
+
+        zcpr.next_in = FilePtr;
+        zcpr.next_out = CprPtr;
+
+
+        do
+        {
+            long all_read_before = zcpr.total_in;
+            zcpr.avail_in = min(lOrigToDo,BlockSizeCompress);
+            zcpr.avail_out = BlockSizeCompress;
+            ret=deflate(&zcpr,(zcpr.avail_in==lOrigToDo) ? Z_FINISH : Z_SYNC_FLUSH);
+            lOrigDone += (zcpr.total_in-all_read_before);
+            lOrigToDo -= (zcpr.total_in-all_read_before);
+            step++;
+        } while (ret==Z_OK);
+
+        lSizeCpr=zcpr.total_out;
+        deflateEnd(&zcpr);
+        dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
+        printf("total compress size = %u, in %u step\n",lSizeCpr,step);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
+    }
+
+    CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr);
+    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
+
+    BeginCountPerfCounter(&li_qp,TRUE);
+    dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
+    {
+        z_stream zcpr;
+        int ret=Z_OK;
+        long lOrigToDo = lSizeCpr;
+        long lOrigDone = 0;
+        int step=0;
+        memset(&zcpr,0,sizeof(z_stream));
+        inflateInit(&zcpr);
+
+        zcpr.next_in = CprPtr;
+        zcpr.next_out = UncprPtr;
+
+
+        do
+        {
+            long all_read_before = zcpr.total_in;
+            zcpr.avail_in = min(lOrigToDo,BlockSizeUncompress);
+            zcpr.avail_out = BlockSizeUncompress;
+            ret=inflate(&zcpr,Z_SYNC_FLUSH);
+            lOrigDone += (zcpr.total_in-all_read_before);
+            lOrigToDo -= (zcpr.total_in-all_read_before);
+            step++;
+        } while (ret==Z_OK);
+
+        lSizeUncpr=zcpr.total_out;
+        inflateEnd(&zcpr);
+        dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
+        printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("uncpr  time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("uncpr  result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
+    }
+
+    if (lSizeUncpr==lFileSize)
+    {
+        if (memcmp(FilePtr,UncprPtr,lFileSize)==0)
+            printf("compare ok\n");
+
+    }
+
+    return 0;
+}
--- a/contrib/testzlib/testzlib.sln
+++ b/contrib/testzlib/testzlib.sln
@@ -1,21 +0,0 @@
-Microsoft Visual Studio Solution File, Format Version 7.00
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
-EndProject
-Global
-	GlobalSection(SolutionConfiguration) = preSolution
-		ConfigName.0 = Debug
-		ConfigName.1 = Release
-	EndGlobalSection
-	GlobalSection(ProjectDependencies) = postSolution
-	EndGlobalSection
-	GlobalSection(ProjectConfiguration) = postSolution
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.ActiveCfg = Debug|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.Build.0 = Debug|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.ActiveCfg = Release|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.Build.0 = Release|Win32
-	EndGlobalSection
-	GlobalSection(ExtensibilityGlobals) = postSolution
-	EndGlobalSection
-	GlobalSection(ExtensibilityAddIns) = postSolution
-	EndGlobalSection
-EndGlobal
--- a/contrib/testzlib/testzlib.txt
+++ b/contrib/testzlib/testzlib.txt
@@ -0,0 +1,10 @@
+To build testzLib with Visual Studio 2005:
+
+copy to a directory file from :
+- root of zLib tree
+- contrib/testzlib
+- contrib/masmx86
+- contrib/masmx64
+- contrib/vstudio/vc7
+
+and open testzlib8.sln
--- a/contrib/untgz/untgz.c
+++ b/contrib/untgz/untgz.c
@@ -97,7 +97,7 @@ struct attr_item
  struct attr_item  *next;
  char              *fname;
  int                mode;
-  time_t             time; 
+  time_t             time;
 };

 enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
--- a/contrib/vstudio/readme.txt
+++ b/contrib/vstudio/readme.txt
@@ -1,8 +1,8 @@
-Building instructions for the DLL versions of Zlib 1.21
-=======================================================
+Building instructions for the DLL versions of Zlib 1.2.3
+========================================================

 This directory contains projects that build zlib and minizip using
-Microsoft Visual C++ 7.0/7.1.
+Microsoft Visual C++ 7.0/7.1, and Visual C++ .

 You don't need to build these projects yourself. You can download the
 binaries from:
@@ -11,18 +11,36 @@ binaries from:
 More information can be found at this site.


-Build instructions
------------------
- Unzip zlib*.zip and copy the files from contrib\vstudio\vc7,
-  from contrib\vstudio\masmx86 and from contrib\minizip into the same
-  directory.
+Build instructions for Visual Studio 7.x (32 bits)
+--------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
 - Download the crtdll library from
    http://www.winimage.com/zLibDll/crtdll.zip
-  Unzip crtdll.zip to extract crtdll.lib.
- If you are using x86, use the Release target.
- Open zlibvc.sln with Microsoft Visual C++ 7.0 or 7.1
+  Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc7.
+- Open contrib\vstudio\vc7\zlibvc.sln with Microsoft Visual C++ 7.x
  (Visual Studio .Net 2002 or 2003).

+Build instructions for Visual Studio 2005 (32 bits or 64 bits)
+--------------------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- For 32 bits only: download the crtdll library from
+    http://www.winimage.com/zLibDll/crtdll.zip
+  Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc8.
+- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
+
+Build instructions for Visual Studio 2005 64 bits, PSDK compiler
+----------------------------------------------------------------
+at the time of writing this text file, Visual Studio 2005 (and 
+  Microsoft Visual C++ 8.0) is on the beta 2 stage.
+Using you can get the free 64 bits compiler from Platform SDK, 
+  which is NOT a beta, and compile using the Visual studio 2005 IDE
+see http://www.winimage.com/misc/sdk64onvs2005/ for instruction
+
+- Uncompress current zlib, including all contrib/* files
+- start Visual Studio 2005 from a platform SDK command prompt, using
+  the /useenv switch
+- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
+

 Important
 ---------
--- a/contrib/vstudio/vc7/gvmat32.obj
+++ b/contrib/vstudio/vc7/gvmat32.obj
--- a/contrib/vstudio/vc7/miniunz.vcproj
+++ b/contrib/vstudio/vc7/miniunz.vcproj
@@ -19,6 +19,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
 				MinimalRebuild="TRUE"
 				BasicRuntimeChecks="3"
@@ -63,6 +64,7 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				OmitFramePointers="TRUE"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
 				StringPooling="TRUE"
 				RuntimeLibrary="4"
@@ -104,7 +106,7 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
 			<File
-				RelativePath="miniunz.c">
+				RelativePath="..\..\minizip\miniunz.c">
 			</File>
 		</Filter>
 		<Filter
@@ -116,7 +118,7 @@
 			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
 		</Filter>
 		<File
-			RelativePath="zlibwapi.lib">
+			RelativePath="ReleaseDll\zlibwapi.lib">
 		</File>
 	</Files>
 	<Globals>
--- a/contrib/vstudio/vc7/minizip.vcproj
+++ b/contrib/vstudio/vc7/minizip.vcproj
@@ -19,6 +19,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
 				MinimalRebuild="TRUE"
 				BasicRuntimeChecks="3"
@@ -63,6 +64,7 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				OmitFramePointers="TRUE"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
 				StringPooling="TRUE"
 				RuntimeLibrary="4"
@@ -104,7 +106,7 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
 			<File
-				RelativePath="minizip.c">
+				RelativePath="..\..\minizip\minizip.c">
 			</File>
 		</Filter>
 		<Filter
@@ -116,7 +118,7 @@
 			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
 		</Filter>
 		<File
-			RelativePath="zlibwapi.lib">
+			RelativePath="ReleaseDll\zlibwapi.lib">
 		</File>
 	</Files>
 	<Globals>
--- a/contrib/vstudio/vc7/testzlib.vcproj
+++ b/contrib/vstudio/vc7/testzlib.vcproj
@@ -2,8 +2,8 @@
 <VisualStudioProject
 	ProjectType="Visual C++"
 	Version="7.00"
-	Name="testzlib"
-	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+	Name="testZlibDll"
+	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}"
 	Keyword="Win32Proj">
 	<Platforms>
 		<Platform
@@ -19,6 +19,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\.."
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
 				MinimalRebuild="TRUE"
 				BasicRuntimeChecks="3"
@@ -63,6 +64,7 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				OmitFramePointers="TRUE"
+				AdditionalIncludeDirectories="..\..\.."
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
 				StringPooling="TRUE"
 				RuntimeLibrary="4"
@@ -104,7 +106,7 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
 			<File
-				RelativePath="testzlib.c">
+				RelativePath="..\..\testzlib\testzlib.c">
 			</File>
 		</Filter>
 		<Filter
@@ -116,7 +118,7 @@
 			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
 		</Filter>
 		<File
-			RelativePath="zlibwapi.lib">
+			RelativePath="ReleaseDll\zlibwapi.lib">
 		</File>
 	</Files>
 	<Globals>
--- a/contrib/vstudio/vc7/zlib.rc
+++ b/contrib/vstudio/vc7/zlib.rc
@@ -2,8 +2,8 @@

 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,1,2
-  PRODUCTVERSION 1,2,1,2
+  FILEVERSION	 1,2,3,5
+  PRODUCTVERSION 1,2,3,5
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN

    BEGIN
      VALUE "FileDescription", "zlib data compression library\0"
-      VALUE "FileVersion",	"1.2.1.2\0"
+      VALUE "FileVersion",	"1.2.3.5\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlib.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2003 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2006 Jean-loup Gailly & Mark Adler\0"
    END
  END
  BLOCK "VarFileInfo"
--- a/contrib/vstudio/vc7/zlibstat.vcproj
+++ b/contrib/vstudio/vc7/zlibstat.vcproj
@@ -20,6 +20,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
 				ExceptionHandling="FALSE"
 				RuntimeLibrary="5"
@@ -61,6 +62,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -102,6 +104,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;ASMV;ASMINF"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -117,7 +120,7 @@
 				Name="VCCustomBuildTool"/>
 			<Tool
 				Name="VCLibrarianTool"
-				AdditionalOptions="gvmat32.obj inffas32.obj /NODEFAULTLIB "
+				AdditionalOptions="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj /NODEFAULTLIB "
 				OutputFile=".\zlibstat\zlibstat.lib"
 				SuppressStartupBanner="TRUE"/>
 			<Tool
@@ -144,6 +147,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -182,49 +186,61 @@
 			Name="Source Files"
 			Filter="">
 			<File
-				RelativePath=".\adler32.c">
+				RelativePath="..\..\..\adler32.c">
 			</File>
 			<File
-				RelativePath=".\compress.c">
+				RelativePath="..\..\..\compress.c">
 			</File>
 			<File
-				RelativePath=".\crc32.c">
+				RelativePath="..\..\..\crc32.c">
 			</File>
 			<File
-				RelativePath=".\deflate.c">
+				RelativePath="..\..\..\deflate.c">
 			</File>
 			<File
-				RelativePath=".\gvmat32c.c">
+				RelativePath="..\..\masmx86\gvmat32c.c">
 			</File>
 			<File
-				RelativePath=".\gzio.c">
+				RelativePath="..\..\..\gzclose.c">
 			</File>
 			<File
-				RelativePath=".\infback.c">
+				RelativePath="..\..\..\gzio.c">
 			</File>
 			<File
-				RelativePath=".\inffast.c">
+				RelativePath="..\..\..\gzlib.c">
 			</File>
 			<File
-				RelativePath=".\inflate.c">
+				RelativePath="..\..\..\gzread.c">
 			</File>
 			<File
-				RelativePath=".\inftrees.c">
+				RelativePath="..\..\..\gzwrite.c">
 			</File>
 			<File
-				RelativePath=".\ioapi.c">
+				RelativePath="..\..\..\infback.c">
 			</File>
 			<File
-				RelativePath=".\trees.c">
+				RelativePath="..\..\..\inffast.c">
 			</File>
 			<File
-				RelativePath=".\uncompr.c">
+				RelativePath="..\..\..\inflate.c">
 			</File>
 			<File
-				RelativePath=".\unzip.c">
+				RelativePath="..\..\..\inftrees.c">
 			</File>
 			<File
-				RelativePath=".\zip.c">
+				RelativePath="..\..\minizip\ioapi.c">
+			</File>
+			<File
+				RelativePath="..\..\..\trees.c">
+			</File>
+			<File
+				RelativePath="..\..\..\uncompr.c">
+			</File>
+			<File
+				RelativePath="..\..\minizip\unzip.c">
+			</File>
+			<File
+				RelativePath="..\..\minizip\zip.c">
 			</File>
 			<File
 				RelativePath=".\zlib.rc">
@@ -233,7 +249,7 @@
 				RelativePath=".\zlibvc.def">
 			</File>
 			<File
-				RelativePath=".\zutil.c">
+				RelativePath="..\..\..\zutil.c">
 			</File>
 		</Filter>
 	</Files>
--- a/contrib/vstudio/vc7/zlibvc.def
+++ b/contrib/vstudio/vc7/zlibvc.def
@@ -1,5 +1,5 @@

-VERSION		1.21
+VERSION		1.23

 HEAPSIZE	1048576,8192

@@ -53,7 +53,7 @@ EXPORTS
        deflateBound                             @47
        gzclearerr                               @48
        gzungetc                                 @49
-        zlibCompileFlags                         @50
+        zlibCompileFlags                         @50
        deflatePrime                             @51

        unzOpen                                  @61
--- a/contrib/vstudio/vc7/zlibvc.sln
+++ b/contrib/vstudio/vc7/zlibvc.sln
@@ -7,6 +7,8 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj",
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
 EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testZlibDll", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}"
+EndProject
 Global
 	GlobalSection(SolutionConfiguration) = preSolution
 		ConfigName.0 = Debug
@@ -58,6 +60,16 @@ Global
 		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm.Build.0 = Release|Win32
 		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32
 		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.ActiveCfg = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.Build.0 = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.Build.0 = Release|Win32
 	EndGlobalSection
 	GlobalSection(ExtensibilityGlobals) = postSolution
 	EndGlobalSection
--- a/contrib/vstudio/vc7/zlibvc.vcproj
+++ b/contrib/vstudio/vc7/zlibvc.vcproj
@@ -20,6 +20,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
 				ExceptionHandling="FALSE"
 				RuntimeLibrary="1"
@@ -35,7 +36,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalOptions="/MACHINE:I386"
-				AdditionalDependencies="gvmat32.obj inffas32.obj"
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
 				OutputFile=".\DebugDll\zlibwapi.dll"
 				LinkIncremental="2"
 				SuppressStartupBanner="TRUE"
@@ -72,10 +73,12 @@
 			IntermediateDirectory=".\zlibDllWithoutAsm"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -134,10 +137,12 @@
 			IntermediateDirectory=".\zlibDllWithoutCrtDll"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -156,7 +161,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalOptions="/MACHINE:I386"
-				AdditionalDependencies="gvmat32.obj inffas32.obj "
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj "
 				OutputFile=".\zlibDllWithoutCrtDll\zlibwapi.dll"
 				LinkIncremental="1"
 				SuppressStartupBanner="TRUE"
@@ -196,10 +201,12 @@
 			IntermediateDirectory=".\zlibvc__"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -256,10 +263,12 @@
 			IntermediateDirectory=".\ReleaseDll"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -278,7 +287,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalOptions="/MACHINE:I386"
-				AdditionalDependencies="gvmat32.obj inffas32.obj crtdll.lib"
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj crtdll.lib"
 				OutputFile=".\ReleaseDll\zlibwapi.dll"
 				LinkIncremental="1"
 				SuppressStartupBanner="TRUE"
@@ -318,19 +327,19 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90">
 			<File
-				RelativePath=".\adler32.c">
+				RelativePath="..\..\..\adler32.c">
 			</File>
 			<File
-				RelativePath=".\compress.c">
+				RelativePath="..\..\..\compress.c">
 			</File>
 			<File
-				RelativePath=".\crc32.c">
+				RelativePath="..\..\..\crc32.c">
 			</File>
 			<File
-				RelativePath=".\deflate.c">
+				RelativePath="..\..\..\deflate.c">
 			</File>
 			<File
-				RelativePath=".\gvmat32c.c">
+				RelativePath="..\..\masmx86\gvmat32c.c">
 				<FileConfiguration
 					Name="ReleaseWithoutAsm|Win32"
 					ExcludedFromBuild="TRUE">
@@ -339,34 +348,46 @@
 				</FileConfiguration>
 			</File>
 			<File
-				RelativePath=".\gzio.c">
+				RelativePath="..\..\..\gzclose.c">
 			</File>
 			<File
-				RelativePath=".\infback.c">
+				RelativePath="..\..\..\gzio.c">
 			</File>
 			<File
-				RelativePath=".\inffast.c">
+				RelativePath="..\..\..\gzlib.c">
 			</File>
 			<File
-				RelativePath=".\inflate.c">
+				RelativePath="..\..\..\gzread.c">
 			</File>
 			<File
-				RelativePath=".\inftrees.c">
+				RelativePath="..\..\..\gzwrite.c">
 			</File>
 			<File
-				RelativePath=".\ioapi.c">
+				RelativePath="..\..\..\infback.c">
 			</File>
 			<File
-				RelativePath=".\iowin32.c">
+				RelativePath="..\..\..\inffast.c">
 			</File>
 			<File
-				RelativePath=".\trees.c">
+				RelativePath="..\..\..\inflate.c">
 			</File>
 			<File
-				RelativePath=".\uncompr.c">
+				RelativePath="..\..\..\inftrees.c">
 			</File>
 			<File
-				RelativePath=".\unzip.c">
+				RelativePath="..\..\minizip\ioapi.c">
+			</File>
+			<File
+				RelativePath="..\..\minizip\iowin32.c">
+			</File>
+			<File
+				RelativePath="..\..\..\trees.c">
+			</File>
+			<File
+				RelativePath="..\..\..\uncompr.c">
+			</File>
+			<File
+				RelativePath="..\..\minizip\unzip.c">
 				<FileConfiguration
 					Name="Release|Win32">
 					<Tool
@@ -376,7 +397,7 @@
 				</FileConfiguration>
 			</File>
 			<File
-				RelativePath=".\zip.c">
+				RelativePath="..\..\minizip\zip.c">
 				<FileConfiguration
 					Name="Release|Win32">
 					<Tool
@@ -392,38 +413,38 @@
 				RelativePath=".\zlibvc.def">
 			</File>
 			<File
-				RelativePath=".\zutil.c">
+				RelativePath="..\..\..\zutil.c">
 			</File>
 		</Filter>
 		<Filter
 			Name="Header Files"
 			Filter="h;hpp;hxx;hm;inl;fi;fd">
 			<File
-				RelativePath=".\deflate.h">
+				RelativePath="..\..\..\deflate.h">
 			</File>
 			<File
-				RelativePath=".\infblock.h">
+				RelativePath="..\..\..\infblock.h">
 			</File>
 			<File
-				RelativePath=".\infcodes.h">
+				RelativePath="..\..\..\infcodes.h">
 			</File>
 			<File
-				RelativePath=".\inffast.h">
+				RelativePath="..\..\..\inffast.h">
 			</File>
 			<File
-				RelativePath=".\inftrees.h">
+				RelativePath="..\..\..\inftrees.h">
 			</File>
 			<File
-				RelativePath=".\infutil.h">
+				RelativePath="..\..\..\infutil.h">
 			</File>
 			<File
-				RelativePath=".\zconf.h">
+				RelativePath="..\..\..\zconf.h">
 			</File>
 			<File
-				RelativePath=".\zlib.h">
+				RelativePath="..\..\..\zlib.h">
 			</File>
 			<File
-				RelativePath=".\zutil.h">
+				RelativePath="..\..\..\zutil.h">
 			</File>
 		</Filter>
 		<Filter
--- a/contrib/vstudio/vc8/miniunz.vcproj
+++ b/contrib/vstudio/vc8/miniunz.vcproj
@@ -0,0 +1,566 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="miniunz"
+	ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="x64"
+		/>
+		<Platform
+			Name="Itanium"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="1"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|x64"
+			OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+				SubSystem="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Itanium"
+			OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+				SubSystem="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|x64"
+			OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Itanium"
+			OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath="..\..\minizip\miniunz.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>
--- a/contrib/vstudio/vc8/minizip.vcproj
+++ b/contrib/vstudio/vc8/minizip.vcproj
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="minizip"
+	ProjectGUID="{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="x64"
+		/>
+		<Platform
+			Name="Itanium"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\MiniZip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="1"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|x64"
+			OutputDirectory="x64\$(ConfigurationName)"
+			IntermediateDirectory="x64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+				SubSystem="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Itanium"
+			OutputDirectory="ia64\$(ConfigurationName)"
+			IntermediateDirectory="ia64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+				SubSystem="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\MiniZip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|x64"
+			OutputDirectory="x64\$(ConfigurationName)"
+			IntermediateDirectory="x64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Itanium"
+			OutputDirectory="ia64\$(ConfigurationName)"
+			IntermediateDirectory="ia64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath="..\..\minizip\minizip.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Mark Adler	d004b04783	zlib 1.2.3.5	2011-09-09 23:26:49 -07:00
Mark Adler	f6194ef39a	zlib 1.2.3.4	2011-09-09 23:26:40 -07:00
Mark Adler	639be99788	zlib 1.2.3.3	2011-09-09 23:26:29 -07:00
Mark Adler	d6231142d2	zlib 1.2.3.2	2011-09-09 23:25:38 -07:00
Mark Adler	b1c19ca6d8	zlib 1.2.3.1	2011-09-09 23:25:27 -07:00
Mark Adler	abf180a067	zlib 1.2.3	2011-09-09 23:25:17 -07:00
Mark Adler	9c3a583021	zlib 1.2.2.4	2011-09-09 23:24:52 -07:00
Mark Adler	6b8233bfe0	zlib 1.2.2.3	2011-09-09 23:24:43 -07:00
Mark Adler	0484693e17	zlib 1.2.2.2	2011-09-09 23:24:33 -07:00
Mark Adler	9811b53dd9	zlib 1.2.2.1	2011-09-09 23:24:24 -07:00
Mark Adler	79fbcdc939	zlib 1.2.2	2011-09-09 23:24:02 -07:00