We've had problems that seem to manifest in run_tests.mm getting stuck
on exit. For our automated test targets only full_stack.cc was making
use of the platform-specific renderers provided by webrtc_test_common
and since no one currently monitors these the use case is hypothetical.
Readding platform-specific renderers to video_loopback is tracked with
issue 3039, though as far as I'm aware no one's currently using the
video_loopback target.
BUG=2987
R=kjellander@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9789004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5686 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL implements a unit test to cover an case where comfort noise
packets should be discarded. The situation arises when NetEq gets a
duplicate comfort noise packet. Without this check, the duplicate would
be decoded, and a the timing would shift.
As it turned out, the corner-case funcionality was not completely
accurate in NetEq4. This is because decision_logic_::cng_state_ is set
after the corner-case check. In the old NetEq3, the corresponding state
was changed before the check. This is now fixed.
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9639005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5685 4adac7df-926f-26a2-2b94-8c16560cd09d
Adding option to use mock or real objects instead of mocks.
This will help future testing efforts, where each test case can
select whether a mock or a real object should be used.
Adding new test InsertPacketsUntilBufferIsFull.
Removing a few uniteresting mock call warning.
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9839004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5684 4adac7df-926f-26a2-2b94-8c16560cd09d
- Add an Initialize() overload to allow specification of format
parameters. This is mainly useful for testing, but could be used in
the cases where a consumer knows the format before the streams arrive.
- Add a reverse_sample_rate_hz_ parameter to prepare for mismatched
capture and render rates. There is no functional change as it is
currently constrained to match the capture rate.
- Fix a bug in the float dump: we need to use add_ rather than set_.
- Add a debug dump test for both int and float interfaces.
- Enable unpacking of float dumps.
- Enable audioproc to read float dumps.
- Move more shared functionality to test_utils.h, and generally tidy up
a bit by consolidating repeated code.
BUG=2894
TESTED=Verified that the output produced by the float debug dump test is
correct. Processed the resulting debug dump file with audioproc and
ensured that we get identical output. (This is crucial, as we need to
be able to exactly reproduce online results offline.)
R=aluebs@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9489004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5676 4adac7df-926f-26a2-2b94-8c16560cd09d
Overview of changes in Chrome DEPS:
$ svn diff http://src.chromium.org/chrome/trunk/src/DEPS -r 249215:255773
which can be compared with the output of:
$ grep chromium_deps DEPS
in a WebRTC checkout, gives the following relevant changes:
* third_party/icu 246118:249466
* third_party/libyuv 978:979
* third_party/libjpeg_turbo 239595:251747
* third_party/libsrtp 214783:250757
* third_party/nss 246067:254867
* tools/clang-format 198831:202065
* tools/gyp 1846:1860
Among a variety of updated DEPS, this enables us to use
the new automatic download of Chromium's stripped down
Visual Studio 2013 toolchain on Windows.
For Windows, Visual Studio 2013 is also the default compiler
in Chrome. This CL sets the GYP_MSVS_VERSION to 2010 unless
otherwise specified. Doing that we can first fix our 2013 problems
before we move over to having 2013 by default.
The plan is to build 2013 at the WebRTC FYI waterfall at
http://build.chromium.org/p/client.webrtc.fyi/waterfall
to ensure we can support VS2013 before the switch.
I realized we can sync Chromium's find_depot_tools.py script
into it's own folder and just alter the PYTHONPATH for the
gyp_webrtc script. That way there's no need to have the dummy
module in webrtc/build anymore. The real script is also needed
for the logic that handles checking VS2013 and downloading it if
not found.
BUG=chromium:340973
TEST=All trybots passing runhooks and compile step.
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9299004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5667 4adac7df-926f-26a2-2b94-8c16560cd09d
std::memcpy -> memcpy for instance. This change was motivated by a
compile report complaining that std::rand() was used instead of rand(),
probably with a stdlib.h include instead of cstdlib. Use of C functions
without the std:: prefix is a lot more common, so removing std:: to
address this.
BUG=
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9549004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5658 4adac7df-926f-26a2-2b94-8c16560cd09d
std::memcpy -> memcpy for instance. This change was motivated by a
compile report complaining that std::rand() was used instead of rand(),
probably with a stdlib.h include instead of cstdlib. Use of C functions
without the std:: prefix is a lot more common, so removing std:: to
address this.
BUG=
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9559004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5657 4adac7df-926f-26a2-2b94-8c16560cd09d
As a by-product, a generic tool for testing and comparing the complexity of codecs is added, and new audio files are added to the resources.
Three complexity tests are included
1. Default Opus complexity
2. Opus complexity knob
3. Default iSAC complexity (to compare with Opus)
The complexity tests are only meant for development reasons
and not to be run at bots.
The .isolate file is only needed for the APK packaging and test execution on Android.
TEST=passes all trybots
BUG=
R=kjellander@webrtc.org, tina.legrand@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/8969004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5655 4adac7df-926f-26a2-2b94-8c16560cd09d
- Add ability to VoE to send Absolute Sender Time header extension.
- Refactor handling of RTP header extensions in VoE to work the same as in ViE.
- Add API to enable receiving Absolute Sender Time in VoE.
This is part of the work to include audio packets in bandwidth estimation, for
better accuracy in estimates.
BUG=
TBR=solenberg@webrtc.org,henrikg@webrtc.org,stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9509004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5654 4adac7df-926f-26a2-2b94-8c16560cd09d
The variable playout_timestamp_ was not updated to the latest decoded
timestamp while comfort noise was played. Instead, it was upadted using
dead reckoning, which caused it to drift away from the timestamps of the
incoming CNG packets. Now it is updated also during comfort noise
playout.
Since the change is only in NetEq4, this change also makes the test
PlaysOutAudioAndVideoInSync use both ACM1/NetEq3 and ACM2/NetEq4.
Re-enabling one NetEq unit test that is no longer failing thanks to this CL.
BUG=2932
R=stefan@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/8799004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5649 4adac7df-926f-26a2-2b94-8c16560cd09d
The new test is based upon the exisiting rampup test, but also adds
a low-rate period. The main purpose of the test is to verify the
SuspendBelowMinBitrate functionality, which must be enabled for the
test to pass.
The CL also adds a change to the min bitrate in the send-side bandwidth
estimator when SuspendBelowMinBitrate is enabled.
An anonymous namespace is added around the StreamObserver classes
in the test to avoid silent linker conflicts that could happen
otherwise.
Note: this CL depends on https://webrtc-codereview.appspot.com/9049004/
BUG=2636
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9059004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5646 4adac7df-926f-26a2-2b94-8c16560cd09d
This is mainly to support the native audio format in Chrome. Although
this implementation just moves the float->int conversion under the hood,
we will transition AudioProcessing towards supporting this format
throughout.
- Add a test which verifies we get identical output with the float and
int interfaces.
- The float and int wrappers are tasked with conversion to the
AudioBuffer format. A new shared Process/Analyze method does most of
the work.
- Add a new field to the debug.proto to hold deinterleaved data.
- Add helpers to audio_utils.cc, and start using numeric_limits.
- Note that there was no performance difference between numeric_limits
and a literal value when measured on Linux using gcc or clang.
BUG=2894
R=aluebs@webrtc.org, bjornv@webrtc.org, henrikg@webrtc.org, tommi@webrtc.org, turaj@webrtc.org, xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9179004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5641 4adac7df-926f-26a2-2b94-8c16560cd09d
Because stopCapture() and onPreviewFrame() are called on different threads, and
are both synchronized, it's possible for onPreviewFrame() to commence execution
after stopCapture() has completed, causing a SEGV because the native code is no
longer prepared to accept frames.
Clarify the contract around synchronized methods in this class to hopefully
avoid similar bugs in future.
BUG=2947
R=henrike@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/9339004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5639 4adac7df-926f-26a2-2b94-8c16560cd09d
