The roll seems to cause leaks on our Linux Memcheck bot.
Added a suppression needed for Trusty in order to run
memcheck similar to the bot (that runs Precise).
Leave all the other source code edits from r8596 in place.
See also http://chromegw/i/client.webrtc/builders/Linux%20Memcheck/builds/3343TBR=pbos@webrtc.org
TESTED=Can no longer repro memcheck failure with this patch applied:
GYP_DEFINES="build_for_tool=memcheck" webrtc/build/gyp_webrtc
ninja -C out/Release libjingle_peerconnection_unittest
tools/valgrind-webrtc/webrtc_tests.sh --test libjingle_peerconnection_unittest --tool memcheck --target Release --build-dir out --gtest_filter=WebRtcSessionTest.TestIncorrectMLinesInLocalAnswer
Review URL: https://webrtc-codereview.appspot.com/47419004
Cr-Commit-Position: refs/heads/master@{#8612}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8612 4adac7df-926f-26a2-2b94-8c16560cd09d
Allow for setting different cpu_speed setting based on resolution, for non-simulcast.
Use the existing low resolution simulcast cpu_speed setting for the non-simulcast case.
No change to simulcast behavior, unless top/highest layer stream is also below CIF resolution,
(in which case all layers will use lower the cpu_speed setting =-4).
BUG=
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37319004
Cr-Commit-Position: refs/heads/master@{#8603}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8603 4adac7df-926f-26a2-2b94-8c16560cd09d
This is unfortunately causing build problems in Chrome on Windows.
> Unify underlying frame buffer in I420VideoFrame and WebRtcVideoFrame
>
> Currently, I420VideoFrame uses three webrtc::Plane to store pixel data, and WebRtcVideoFrame uses WebRtcVideoFrame::FrameBuffer/webrtc::VideoFrame. The two subclasses WebRtcTextureVideoFrame and TextureVideoFrame use a NativeHandle to store pixel data, and there is also a class WebRtcVideoRenderFrame that wraps an I420VideoFrame.
>
> This CL replaces these classes with a new interface VideoFrameBuffer that provides the common functionality. This makes it possible to remove deep frame copies between cricket::VideoFrame and I420VideoFrame.
>
> Some additional minor changes are:
> * Disallow creation of 0x0 texture frames.
> * Remove the half-implemented ref count functions in I420VideoFrame.
> * Remove the Alias functionality in WebRtcVideoFrame
>
> The final goal is to eliminate all frame copies, but to limit the scope of this CL, some planned changes are postponed to follow-up CL:s (see planned changes in https://webrtc-codereview.appspot.com/38879004, or https://docs.google.com/document/d/1bxoJZNmlo-Z9GnQwIaWpEG6hDlL_W-bzka8Zb_K2NbA/preview). Specifically, this CL:
> * Keeps empty subclasses WebRtcTextureVideoFrame and TextureVideoFrame, and just delegates the construction to the superclass.
> * Keeps the deep copies from cricket::VideoFrame to I420VideoFrame.
>
> BUG=1128
> R=mflodman@webrtc.org, pbos@webrtc.org, perkj@webrtc.org, tommi@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/42469004TBR=magjed@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42199005
Cr-Commit-Position: refs/heads/master@{#8599}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8599 4adac7df-926f-26a2-2b94-8c16560cd09d
Rename "AddValue" methods to AddXxx where Xxx is the type being added. Moving forward, we'll support those types natively without conversion to string.
Normalizing the extraction code to have fewer places that add the same stats and data driven additions to reports instead of multiple call sites.
BUG=2822
R=perkj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47369004
Cr-Commit-Position: refs/heads/master@{#8597}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8597 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
Currently, I420VideoFrame uses three webrtc::Plane to store pixel data, and WebRtcVideoFrame uses WebRtcVideoFrame::FrameBuffer/webrtc::VideoFrame. The two subclasses WebRtcTextureVideoFrame and TextureVideoFrame use a NativeHandle to store pixel data, and there is also a class WebRtcVideoRenderFrame that wraps an I420VideoFrame.
This CL replaces these classes with a new interface VideoFrameBuffer that provides the common functionality. This makes it possible to remove deep frame copies between cricket::VideoFrame and I420VideoFrame.
Some additional minor changes are:
* Disallow creation of 0x0 texture frames.
* Remove the half-implemented ref count functions in I420VideoFrame.
* Remove the Alias functionality in WebRtcVideoFrame
The final goal is to eliminate all frame copies, but to limit the scope of this CL, some planned changes are postponed to follow-up CL:s (see planned changes in https://webrtc-codereview.appspot.com/38879004, or https://docs.google.com/document/d/1bxoJZNmlo-Z9GnQwIaWpEG6hDlL_W-bzka8Zb_K2NbA/preview). Specifically, this CL:
* Keeps empty subclasses WebRtcTextureVideoFrame and TextureVideoFrame, and just delegates the construction to the superclass.
* Keeps the deep copies from cricket::VideoFrame to I420VideoFrame.
BUG=1128
R=mflodman@webrtc.org, pbos@webrtc.org, perkj@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42469004
Cr-Commit-Position: refs/heads/master@{#8580}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8580 4adac7df-926f-26a2-2b94-8c16560cd09d
This solution does not use the existing VAD/DTX logic of ACM, since Opus DTX is codec feature, while ACM VAD/DTX is mainly for setting the WebRTC VAD/DTX.
During the development of this CL, two old bugs were found and are fixed in this CL too.
They are in
webrtc/modules/audio_coding/test/Channels.cc
and webrtc/modules/audio_coding/main/acm2/acm_opus_unittest.cc
respectively.
BUG=webrtc:1014
R=henrik.lundin@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/38469004
Cr-Commit-Position: refs/heads/master@{#8573}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8573 4adac7df-926f-26a2-2b94-8c16560cd09d
This is to fix a race that occurs in unit tests when the tests inherit
from the engine class that also implements the callback interface for
tracing. If tracing happens while the most derived class is still being
constructed, we're in trouble.
So, instead, factoring out the TraceCallback implementation.
R=pbos@webrtc.org
BUG=
Review URL: https://webrtc-codereview.appspot.com/43489004
Cr-Commit-Position: refs/heads/master@{#8562}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8562 4adac7df-926f-26a2-2b94-8c16560cd09d
