By using the C++ version of Zxing, we can avoid having Java and Ant
as a dependency when running Video quality analysis on the bots.
This makes it far more easy to setup automation on new machines.
I also moved the scripts into the webrtc/ folder so it will be synced by default when building in Chrome (eliminating the need of a separate solution).
This CL also removes the need of the FFMPEG_HOME variable and replaces
its use with a command line flag to make the tool run smoothly on
Windows.
BUG=none
TEST=locally running the script on Windows, Mac and Linux.
Review URL: https://webrtc-codereview.appspot.com/1099007
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3640 4adac7df-926f-26a2-2b94-8c16560cd09d
- Added pipe rule flush handling
- Also fixed a bug preventing any rule settings other than default from being
used no matter what preset was chosen
- Fixed some comments.
BUGS=none
TEST= Windows and linux
Review URL: https://webrtc-codereview.appspot.com/1158006
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3639 4adac7df-926f-26a2-2b94-8c16560cd09d
Due to a bug in the RTP module, which appeared during packet loss, we have had too short delay in the Win Large Test. When the bug was fixed we had a regression error that should be fixed with this update.
Review URL: https://webrtc-codereview.appspot.com/1091005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3466 4adac7df-926f-26a2-2b94-8c16560cd09d
The change in r3354 caused the --tool argument to not be parsed if it's passed after the test executable. Then it's considered an argument to the test rather than a script flag.
This CL cleans the code a bit and makes it possible to pass all the supported argument in the different ways possible.
NOTICE: To pass arguments to the test executable, you must use the -- argument must be specified before the test arguments start, to signal that everything that comes after it are positional arguments only (which are passed on to the test during execution).
BUG=none
TEST=The following combinations have been tested:
tools/valgrind-webrtc/webrtc_tests.sh -b out/Debug -t test_support_unittests --tool asan
tools/valgrind-webrtc/webrtc_tests.sh -b out/Debug -t test_support_unittests --tool asan -- --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh --tool asan -b out/Debug -t test_support_unittests
tools/valgrind-webrtc/webrtc_tests.sh --tool asan -b out/Debug -t test_support_unittests -- --foo --bar
Review URL: https://webrtc-codereview.appspot.com/1026005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3355 4adac7df-926f-26a2-2b94-8c16560cd09d
* Clarified that the test only supports specifying a single test (multiple didn't work before, so better not claim to support it).
* No longer needs test executable arguments to use ++ instead of --
* Only appends the build_dir path to the test executable if not already
present.
* Simplified suppression path handling.
* Fixed crash when -v was used (import logging was missing)
* Style fixes.
* Thorougly tested with all the supported flags.
I noted that the --gtest_filter flag does not work as expected (it's
only for 'additional gtest_filter arguments', which seems to mean
additional arguments to the gtest filter text files that are used by
Chrome. I left it in here anyway. If --gtest_filter is given after the
test executable it will work, since those arguments are added straight
to the test executable
the test
BUG=none
TEST=I ran the following commands and verified that the suppressions and flags were handled correct:
tools/valgrind-webrtc/webrtc_tests.sh -v --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -t out/Debug/test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t out/Debug/test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --tool=tsan --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -t out/Debug/test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --tool=tsan --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --tool=tsan --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t out/Debug/test_support_unittests --foo --bar
Review URL: https://webrtc-codereview.appspot.com/1029005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3354 4adac7df-926f-26a2-2b94-8c16560cd09d
* Improved sort checker so we sort includes more.
* Fixed vars in brackets and varsLikeTHIS.
* Added automatic x++ to ++x conversion in for loops.
TEST=Ran on various source files and verified manually.
Review URL: https://webrtc-codereview.appspot.com/1017004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3325 4adac7df-926f-26a2-2b94-8c16560cd09d
This makes it possible to compile on the bots without hardcoding paths
to Ant, Java and ffmpeg deep into the Python scripts (hardcoded paths exists only in the buildbot configuration).
For bots, the ANT_HOME, JAVA_HOME and FFMPEG_HOME environment variables must be set to the install locations for each of these dependencies, for Windows.
This CL also improves the return code handling to make failures easier to detect when things break.
TEST=running build_zxing.py without Ant or Java in the PATH, but with
ANT_HOME, JAVA_HOME and FFMPEG_HOME set. Running Chromium's src/chrome/test/functional/webrtc_video_quality.py.
BUG=none
Review URL: https://webrtc-codereview.appspot.com/1002005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3311 4adac7df-926f-26a2-2b94-8c16560cd09d
Turns out the bot is running a different version of libpthread, probably because I'm on gPrecise / gcc 4.6 whereas the bot is on 4.4? Anyway, I've generalized that stuff now.
BUG=
TEST=Ran voe & vie_auto_test under valgrind locally.
Review URL: https://webrtc-codereview.appspot.com/908004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@2973 4adac7df-926f-26a2-2b94-8c16560cd09d
These changes make the execution abort earlier on an error (like a tool is not found) and makes it easier to figure out what's wrong.
Made build_zxing.py executable.
BUG=None
TEST=Local runs of the PyAuto test src/chrome/test/functional/webrtc_video_quality.py in Chromium.
Review URL: https://webrtc-codereview.appspot.com/840005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@2899 4adac7df-926f-26a2-2b94-8c16560cd09d
Also Suppressed FakeMediaProcess errors (bug 898) and took out a test and suppressed general errors (bug 332). Lastly, fixed memory leak in misc test.
BUG=898, 332
TEST=Ran voe_auto_test with repeat=10 through the whole standard suite, under valgrind. Ran without valgrind. Tested that the extended and standard tests still start and are reachable from the menu.
Review URL: https://webrtc-codereview.appspot.com/855009
git-svn-id: http://webrtc.googlecode.com/svn/trunk@2898 4adac7df-926f-26a2-2b94-8c16560cd09d
Ensured there are bugs for all open valgrind issues in the standard tests and suppressed the known issues. This way, we can get it running in continuous integration and keep new issues from entering.
Removed bad check in codec test, added suppressions.
Fixed simple memory leaks in tests.
BUG=Related to bug 329
TEST=Ran the vie_auto_test standard suite many times under valgrind to root out flakiness. Ran the standard suite without valgrind to ensure I didn't break anything.
Review URL: https://webrtc-codereview.appspot.com/843005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@2854 4adac7df-926f-26a2-2b94-8c16560cd09d
Added new wrapper script webrtc_tests.bat for executing memory/threading tests on Windows.
Updated webrtc_tests.sh to include modifications in chrome_tests.sh that has happened since we copied it.
To setup TSAN for Windows, see http://www.chromium.org/developers/how-tos/using-valgrind/threadsanitizer
I did like this:
1. Added "third_party/tsan": "http://src.chromium.org/chrome/trunk/deps/third_party/tsan"
to custom_deps in my .gclient file
2. gclient sync
3. SET GYP_DEFINES=build_with_tool=tsan && gclient runhooks
4. Compiled.
5. Ran the test using the wrapper script (see below).
To setup Dr Memory for Windows, see http://www.chromium.org/developers/how-tos/using-drmemory
I did like this:
1. Added "third_party/drmemory": "http://src.chromium.org/svn/trunk/deps/third_party/drmemory",
to custom_deps in my .gclient file (using the drmemory.DEPS as described on Chromium's wiki ends up in the wrong location)
2. gclient sync
3. SET GYP_DEFINES=build_with_tool=drmemory && gclient runhooks
4. Compiled.
5. Ran the test using the wrapper script (see below).
TEST=
On Windows:
tools\valgrind-webrtc\webrtc_tests.bat --tool=tsan --test build\Debug\voice_engine_unittests.exe
tools\valgrind-webrtc\webrtc_tests.bat --tool=drmemory_light --test build\Debug\voice_engine_unittests.exe
tools\valgrind-webrtc\webrtc_tests.bat --tool=drmemory_full --test build\Debug\voice_engine_unittests.exe
On Linux:
tools/valgrind-webrtc/webrtc_tests.sh --tool=memcheck --test out/Release/test_support_unittests
tools/valgrind-webrtc/webrtc_tests.sh --tool=tsan --test out/Release/test_support_unittests
tools/valgrind-webrtc/webrtc_tests.sh --tool=asan --test out/Release/test_support_unittests
Review URL: https://webrtc-codereview.appspot.com/845004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@2846 4adac7df-926f-26a2-2b94-8c16560cd09d
This is also needed to make it possible to run unit tests easily using Chromium's buildbot source code.
BUG=None
TEST=tools/valgrind-webrtc/webrtc_tests.sh --test test_support_unittests --build_dir=out/Debug
Review URL: https://webrtc-codereview.appspot.com/784007
git-svn-id: http://webrtc.googlecode.com/svn/trunk@2738 4adac7df-926f-26a2-2b94-8c16560cd09d
