__ __ ____ ____ ____
/ \\/ \/ _ \/ _ )/ _ \
\ / __/ _ \ __/
\__\__/\____/\_____/__/ ____ ___
/ _/ / \ \ / _ \/ _/
/ \_/ / / \ \ __/ \__
\____/____/\_____/_____/____/v0.2.1
Description:
============
WebP codec: library to encode and decode images in WebP format. This package
contains the library that can be used in other programs to add WebP support,
as well as the command line tools 'cwebp' and 'dwebp'.
See http://developers.google.com/speed/webp
Latest sources are available from http://www.webmproject.org/code/
It is released under the same license as the WebM project.
See http://www.webmproject.org/license/software/ or the
file "COPYING" file for details. An additional intellectual
property rights grant can be found in the file PATENTS.
Building:
=========
Windows build:
--------------
By running:
nmake /f Makefile.vc CFG=release-static RTLIBCFG=static OBJDIR=output
the directory output\release-static\(x64|x86)\bin will contain the tools
cwebp.exe and dwebp.exe. The directory output\release-static\(x64|x86)\lib will
contain the libwebp static library.
The target architecture (x86/x64) is detected by Makefile.vc from the Visual
Studio compiler (cl.exe) available in the system path.
Unix build using makefile.unix:
-------------------------------
On platforms with GNU tools installed (gcc and make), running
make -f makefile.unix
will build the binaries examples/cwebp and examples/dwebp, along
with the static library src/libwebp.a. No system-wide installation
is supplied, as this is a simple alternative to the full installation
system based on the autoconf tools (see below).
Please refer to the makefile.unix for additional details and customizations.
Using autoconf tools:
---------------------
When building from git sources, you will need to run autogen.sh to generate the
configure script.
./configure
make
make install
should be all you need to have the following files
/usr/local/include/webp/decode.h
/usr/local/include/webp/encode.h
/usr/local/include/webp/types.h
/usr/local/lib/libwebp.*
/usr/local/bin/cwebp
/usr/local/bin/dwebp
installed.
Note: The encoding and decoding libraries are compiled separately
(as src/dec/libwebpdecode.* and src/dec/libwebpencode.*). They
can be installed independently using a minor modification in the
corresponding Makefile.am configure files (see comments there).
SWIG bindings:
--------------
To generate language bindings from swig/libwebp.i swig-1.3
(http://www.swig.org) is required. 2.0 may work, but has not been tested.
Currently the following functions are mapped:
Decode:
WebPGetDecoderVersion
WebPGetInfo
WebPDecodeRGBA
WebPDecodeARGB
WebPDecodeBGRA
WebPDecodeBGR
WebPDecodeRGB
Encode:
WebPGetEncoderVersion
WebPEncodeRGBA
WebPEncodeBGRA
WebPEncodeRGB
WebPEncodeBGR
WebPEncodeLosslessRGBA
WebPEncodeLosslessBGRA
WebPEncodeLosslessRGB
WebPEncodeLosslessBGR
Java bindings:
To build the swig-generated JNI wrapper code at least JDK-1.5 (or equivalent)
is necessary for enum support. The output is intended to be a shared object /
DLL that can be loaded via System.loadLibrary("webp_jni").
Encoding tool:
==============
The examples/ directory contains tools for encoding (cwebp) and
decoding (dwebp) images.
The easiest use should look like:
cwebp input.png -q 80 -o output.webp
which will convert the input file to a WebP file using a quality factor of 80
on a 0->100 scale (0 being the lowest quality, 100 being the best. Default
value is 75).
You might want to try the -lossless flag too, which will compress the source
(in RGBA format) without any loss. The -q quality parameter will in this case
control the amount of processing time spent trying to make the output file as
small as possible.
A longer list of options is available using the -longhelp command line flag:
> cwebp -longhelp
Usage:
cwebp [-preset <...>] [options] in_file [-o out_file]
If input size (-s) for an image is not specified, it is assumed to be a PNG,
JPEG or TIFF file.
options:
-h / -help ............ short help
-H / -longhelp ........ long help
-q <float> ............. quality factor (0:small..100:big)
-alpha_q <int> ......... Transparency-compression quality (0..100).
-preset <string> ....... Preset setting, one of:
default, photo, picture,
drawing, icon, text
-preset must come first, as it overwrites other parameters.
-m <int> ............... compression method (0=fast, 6=slowest)
-segments <int> ........ number of segments to use (1..4)
-size <int> ............ Target size (in bytes)
-psnr <float> .......... Target PSNR (in dB. typically: 42)
-s <int> <int> ......... Input size (width x height) for YUV
-sns <int> ............. Spatial Noise Shaping (0:off, 100:max)
-f <int> ............... filter strength (0=off..100)
-sharpness <int> ....... filter sharpness (0:most .. 7:least sharp)
-strong ................ use strong filter instead of simple.
-partition_limit <int> . limit quality to fit the 512k limit on
the first partition (0=no degradation ... 100=full)
-pass <int> ............ analysis pass number (1..10)
-crop <x> <y> <w> <h> .. crop picture with the given rectangle
-resize <w> <h> ........ resize picture (after any cropping)
-map <int> ............. print map of extra info.
-print_psnr ............ prints averaged PSNR distortion.
-print_ssim ............ prints averaged SSIM distortion.
-print_lsim ............ prints local-similarity distortion.
-d <file.pgm> .......... dump the compressed output (PGM file).
-alpha_method <int> .... Transparency-compression method (0..1)
-alpha_filter <string> . predictive filtering for alpha plane.
One of: none, fast (default) or best.
-alpha_cleanup ......... Clean RGB values in transparent area.
-noalpha ............... discard any transparency information.
-lossless .............. Encode image losslessly.
-hint <string> ......... Specify image characteristics hint.
One of: photo, picture or graph
-short ................. condense printed message
-quiet ................. don't print anything.
-version ............... print version number and exit.
-noasm ................. disable all assembly optimizations.
-v ..................... verbose, e.g. print encoding/decoding times
-progress .............. report encoding progress
Experimental Options:
-af .................... auto-adjust filter strength.
-pre <int> ............. pre-processing filter
The main options you might want to try in order to further tune the
visual quality are:
-preset
-sns
-f
-m
Namely:
* 'preset' will set up a default encoding configuration targeting a
particular type of input. It should appear first in the list of options,
so that subsequent options can take effect on top of this preset.
Default value is 'default'.
* 'sns' will progressively turn on (when going from 0 to 100) some additional
visual optimizations (like: segmentation map re-enforcement). This option
will balance the bit allocation differently. It tries to take bits from the
"easy" parts of the picture and use them in the "difficult" ones instead.
Usually, raising the sns value (at fixed -q value) leads to larger files,
but with better quality.
Typical value is around '75'.
* 'f' option directly links to the filtering strength used by the codec's
in-loop processing. The higher the value, the smoother the
highly-compressed area will look. This is particularly useful when aiming
at very small files. Typical values are around 20-30. Note that using the
option -strong will change the type of filtering. Use "-f 0" to turn
filtering off.
* 'm' controls the trade-off between encoding speed and quality. Default is 4.
You can try -m 5 or -m 6 to explore more (time-consuming) encoding
possibilities. A lower value will result in faster encoding at the expense
of quality.
Decoding tool:
==============
There is a decoding sample in examples/dwebp.c which will take
a .webp file and decode it to a PNG image file (amongst other formats).
This is simply to demonstrate the use of the API. You can verify the
file test.webp decodes to exactly the same as test_ref.ppm by using:
cd examples
./dwebp test.webp -ppm -o test.ppm
diff test.ppm test_ref.ppm
The full list of options is available using -h:
> dwebp -h
Usage: dwebp in_file [options] [-o out_file]
Decodes the WebP image file to PNG format [Default]
Use following options to convert into alternate image formats:
-pam ......... save the raw RGBA samples as a color PAM
-ppm ......... save the raw RGB samples as a color PPM
-pgm ......... save the raw YUV samples as a grayscale PGM
file with IMC4 layout.
Other options are:
-version .... print version number and exit.
-nofancy ..... don't use the fancy YUV420 upscaler.
-nofilter .... disable in-loop filtering.
-mt .......... use multi-threading
-crop <x> <y> <w> <h> ... crop output with the given rectangle
-scale <w> <h> .......... scale the output (*after* any cropping)
-alpha ....... only save the alpha plane.
-h ....... this help message.
-v ....... verbose (e.g. print encoding/decoding times)
-noasm ....... disable all assembly optimizations.
Visualization tool:
===================
There's a little self-serve visualization tool called 'vwebp' under the
examples/ directory. It uses OpenGL to open a simple drawing window and show
a decoded WebP file. It's not yet integrated in the automake or makefile.unix
build system, but you can try to manually compile it using the recommendations
at the top of the source file.
Usage: 'vwebp my_picture.webp'
Encoding API:
=============
The main encoding functions are available in the header src/webp/encode.h
The ready-to-use ones are:
size_t WebPEncodeRGB(const uint8_t* rgb, int width, int height, int stride,
float quality_factor, uint8_t** output);
size_t WebPEncodeBGR(const uint8_t* bgr, int width, int height, int stride,
float quality_factor, uint8_t** output);
size_t WebPEncodeRGBA(const uint8_t* rgba, int width, int height, int stride,
float quality_factor, uint8_t** output);
size_t WebPEncodeBGRA(const uint8_t* bgra, int width, int height, int stride,
float quality_factor, uint8_t** output);
They will convert raw RGB samples to a WebP data. The only control supplied
is the quality factor.
There are some variants for using the lossless format:
size_t WebPEncodeLosslessRGB(const uint8_t* rgb, int width, int height,
int stride, uint8_t** output);
size_t WebPEncodeLosslessBGR(const uint8_t* bgr, int width, int height,
int stride, uint8_t** output);
size_t WebPEncodeLosslessRGBA(const uint8_t* rgba, int width, int height,
int stride, uint8_t** output);
size_t WebPEncodeLosslessBGRA(const uint8_t* bgra, int width, int height,
int stride, uint8_t** output);
Of course in this case, no quality factor is needed since the compression
occurs without loss of the input values, at the expense of larger output sizes.
Advanced encoding API:
----------------------
A more advanced API is based on the WebPConfig and WebPPicture structures.
WebPConfig contains the encoding settings and is not tied to a particular
picture.
WebPPicture contains input data, on which some WebPConfig will be used for
compression.
The encoding flow looks like:
-------------------------------------- BEGIN PSEUDO EXAMPLE
#include <webp/encode.h>
// Setup a config, starting form a preset and tuning some additional
// parameters
WebPConfig config;
if (!WebPConfigPreset(&config, WEBP_PRESET_PHOTO, quality_factor))
return 0; // version error
}
// ... additional tuning
config.sns_strength = 90;
config.filter_sharpness = 6;
config_error = WebPValidateConfig(&config); // not mandatory, but useful
// Setup the input data
WebPPicture pic;
if (!WebPPictureInit(&pic)) {
return 0; // version error
}
pic.width = width;
pic.height = height;
// allocated picture of dimension width x height
if (!WebPPictureAllocate(&pic)) {
return 0; // memory error
}
// at this point, 'pic' has been initialized as a container,
// and can receive the Y/U/V samples.
// Alternatively, one could use ready-made import functions like
// WebPPictureImportRGB(), which will take care of memory allocation.
// In any case, past this point, one will have to call
// WebPPictureFree(&pic) to reclaim memory.
// Set up a byte-output write method. WebPMemoryWriter, for instance.
WebPMemoryWriter wrt;
pic.writer = MyFileWriter;
pic.custom_ptr = my_opaque_structure_to_make_MyFileWriter_work;
// initialize 'wrt' here...
// Compress!
int ok = WebPEncode(&config, &pic); // ok = 0 => error occurred!
WebPPictureFree(&pic); // must be called independently of the 'ok' result.
// output data should have been handled by the writer at that point.
-------------------------------------- END PSEUDO EXAMPLE
Decoding API:
=============
This is mainly just one function to call:
#include "webp/decode.h"
uint8_t* WebPDecodeRGB(const uint8_t* data, size_t data_size,
int* width, int* height);
Please have a look at the file src/webp/decode.h for the details.
There are variants for decoding in BGR/RGBA/ARGB/BGRA order, along with
decoding to raw Y'CbCr samples. One can also decode the image directly into a
pre-allocated buffer.
To detect a WebP file and gather the picture's dimensions, the function:
int WebPGetInfo(const uint8_t* data, size_t data_size,
int* width, int* height);
is supplied. No decoding is involved when using it.
Incremental decoding API:
=========================
In the case when data is being progressively transmitted, pictures can still
be incrementally decoded using a slightly more complicated API. Decoder state
is stored into an instance of the WebPIDecoder object. This object can be
created with the purpose of decoding either RGB or Y'CbCr samples.
For instance:
WebPDecBuffer buffer;
WebPInitDecBuffer(&buffer);
buffer.colorspace = MODE_BGR;
...
WebPIDecoder* idec = WebPINewDecoder(&buffer);
As data is made progressively available, this incremental-decoder object
can be used to decode the picture further. There are two (mutually exclusive)
ways to pass freshly arrived data:
either by appending the fresh bytes:
WebPIAppend(idec, fresh_data, size_of_fresh_data);
or by just mentioning the new size of the transmitted data:
WebPIUpdate(idec, buffer, size_of_transmitted_buffer);
Note that 'buffer' can be modified between each call to WebPIUpdate, in
particular when the buffer is resized to accommodate larger data.
These functions will return the decoding status: either VP8_STATUS_SUSPENDED if
decoding is not finished yet or VP8_STATUS_OK when decoding is done. Any other
status is an error condition.
The 'idec' object must always be released (even upon an error condition) by
calling: WebPDelete(idec).
To retrieve partially decoded picture samples, one must use the corresponding
method: WebPIDecGetRGB or WebPIDecGetYUVA.
It will return the last displayable pixel row.
Lastly, note that decoding can also be performed into a pre-allocated pixel
buffer. This buffer must be passed when creating a WebPIDecoder, calling
WebPINewRGB() or WebPINewYUVA().
Please have a look at the src/webp/decode.h header for further details.
Advanced Decoding API:
======================
WebP decoding supports an advanced API which provides on-the-fly cropping and
rescaling, something of great usefulness on memory-constrained environments like
mobile phones. Basically, the memory usage will scale with the output's size,
not the input's, when one only needs a quick preview or a zoomed in portion of
an otherwise too-large picture. Some CPU can be saved too, incidentally.
-------------------------------------- BEGIN PSEUDO EXAMPLE
// A) Init a configuration object
WebPDecoderConfig config;
CHECK(WebPInitDecoderConfig(&config));
// B) optional: retrieve the bitstream's features.
CHECK(WebPGetFeatures(data, data_size, &config.input) == VP8_STATUS_OK);
// C) Adjust 'config' options, if needed
config.options.no_fancy_upsampling = 1;
config.options.use_scaling = 1;
config.options.scaled_width = scaledWidth();
config.options.scaled_height = scaledHeight();
// etc.
// D) Specify 'config' output options for specifying output colorspace.
// Optionally the external image decode buffer can also be specified.
config.output.colorspace = MODE_BGRA;
// Optionally, the config.output can be pointed to an external buffer as
// well for decoding the image. This externally supplied memory buffer
// should be big enough to store the decoded picture.
config.output.u.RGBA.rgba = (uint8_t*) memory_buffer;
config.output.u.RGBA.stride = scanline_stride;
config.output.u.RGBA.size = total_size_of_the_memory_buffer;
config.output.is_external_memory = 1;
// E) Decode the WebP image. There are two variants w.r.t decoding image.
// The first one (E.1) decodes the full image and the second one (E.2) is
// used to incrementally decode the image using small input buffers.
// Any one of these steps can be used to decode the WebP image.
// E.1) Decode full image.
CHECK(WebPDecode(data, data_size, &config) == VP8_STATUS_OK);
// E.2) Decode image incrementally.
WebPIDecoder* const idec = WebPIDecode(NULL, NULL, &config);
CHECK(idec != NULL);
while (bytes_remaining > 0) {
VP8StatusCode status = WebPIAppend(idec, input, bytes_read);
if (status == VP8_STATUS_OK || status == VP8_STATUS_SUSPENDED) {
bytes_remaining -= bytes_read;
} else {
break;
}
}
WebPIDelete(idec);
// F) Decoded image is now in config.output (and config.output.u.RGBA).
// It can be saved, displayed or otherwise processed.
// G) Reclaim memory allocated in config's object. It's safe to call
// this function even if the memory is external and wasn't allocated
// by WebPDecode().
WebPFreeDecBuffer(&config.output);
-------------------------------------- END PSEUDO EXAMPLE
Bugs:
=====
Please report all bugs to our issue tracker:
http://code.google.com/p/webp/issues
Patches welcome! See this page to get started:
http://www.webmproject.org/code/contribute/submitting-patches/
Discuss:
========
Email: webp-discuss@webmproject.org
Web: http://groups.google.com/a/webmproject.org/group/webp-discuss
b50f277bc7