In RTC coding mode, the alternate reference frame modes and compound
inter prediction modes are disabled. This commit reworks the
related mode search threshold update process to skip interacting
with these coding modes. It provides about 1.5% speed-up for speed
-6 on average.
vidyo1
16551 b/f, 40.451 dB, 6261 ms -> 16550 b/f, 40.459 dB, 6190 ms
nik720p
33316 b/f, 38.795 dB, 6335 ms -> 33310 b/f, 38.798 dB, 6237 ms
mmmoving
33265 b/f, 41.055 dB, 7176 ms -> 33267 b/f, 41.064 dB, 7084 ms
dark720
33329 b/f, 39.729 dB, 11235 ms -> 33331 b/f, 39.733 dB, 10731 ms
Change-Id: If2a4090a371cd28f579be219c013b972d7d9b97f
Use a temporary variable to store the transform size associated
with the best intra mode and restore the mode_info if the overall
best mode is intra mode.
Change-Id: I2606e0061ad32f91b095462902b1eb734b128eea
When multiple intra modes are tested, the previous mode info
update process may overwrite the selected best intra mode and make
the final selection use an inter mode. This commit fixes this
issue by moving the mode_info reset outside the intra mode search
loop.
Change-Id: I15ed4288a6b3cb0832104a5e6d5d9a25cd1a5b2b
If vp9_pick_inter_mode works properly, it should at least check
one coding mode and hence get best_tx_size assigned a valid value.
There is no need to initialize best_tx_size with a legitimate
value before starting the mode search.
Change-Id: Ic0496cd89672ea9c2c512a9bd1da952190af9cba
Make the variable reduction_fac log2 based and explicitly use
right shift when computing intra_cost_penalty.
Change-Id: I208f1fb879a02debb3b3fc64f9fd06260dcf1c86
Replace error_resilient flag with use_prev_frame_mvs in
vp9_pick_inter_mode reference motion vector search selection.
This effectively turns off the simplified ref mv search in the
settings of frame resizing, even if error-resilient mode is off.
Change-Id: I7fed814ee7bc0cb419a03b846e0fc2de46ba7686
The initial reset of this_rdc in vp9_pick_inter_mode is not needed,
since it will be re-assign when used.
Change-Id: Ic0e12d741cbab292fc214c1eabb48b129af7839b
Compare the current best mode rate-distortion cost with the skip
threshold to decide if performing motion search.
Change-Id: Ia071824f8dd3b7db485f424692a485a2da6a1a9f
This commit allows the encoder to increase the mode test kick-off
thresholds if the previous best mode renders all zero quantized
coefficients, thereby saving motion search runs when possible.
The compression performance of speed -5 and -6 is down by -0.446%
and 0.591%, respectively. The runtime of speed -6 is improved by
10% for many test clips.
vidyo1, 1000 kbps
16578 b/f, 40.316 dB, 7873 ms -> 16575 b/f, 40.262 dB, 7126 ms
nik720p, 1000 kbps
33311 b/f, 38.651 dB, 7263 ms -> 33304 b/f, 38.629 dB, 6865 ms
dark720p, 1000 kbps
33331 b/f, 39.718 dB, 13596 ms -> 33324 b/f, 39.651 dB, 12000 ms
mmoving, 1000 kbps
33263 b/f, 40.983 dB, 7566 ms -> 33259 b/f, 40.978 dB, 7531 ms
Change-Id: I7591617ff113e91125ec32c9b853e257fbc41d90
This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
The intra mode penalty is covered by intra_cost_penalty. This
commit removes the other intra cost threshold, provided that the
constant 50 is negligible in normal rate-distortion cost.
Change-Id: I9b8b7483c43b9a41741622e7057def1f7d51bb72
This commit makes a non-RD coding mode decision process for key
frame coding. It can be optionally turned on in speed -6 and above.
Change-Id: I0847258b392877a0210b4768bef88ebc9ad009b5
This commit allows more aggressive decision to skip forward
transform and quantization for luma component in RTC coding mode.
The chroma components remains going through the normal coding
routine, since they are not included in the non-RD mode search
process.
It reduces the runtime cost by 2% - 10%. In speed -6,
vidyo1 1000 kbps
16576 b/f, 40.281 dB, 8402 ms -> 16576 b/f, 40.323 dB, 7764 ms
nik720p 1000 kbps
33337 b/f, 38.622 dB, 7473 ms -> 33299 b/f, 38.660 dB, 7314 ms
dark720p 1000 kbps
33330 b/f, 39.785 dB, 13505 ms -> 33325 b/f, 39.714 dB, 13105 ms
The compression performance of speed -6 is improved by 0.44% in
PSNR and 1.31% in SSIM.
Change-Id: Iae9e3738de6255babea734e5897f29118bebc6d7
This commit adds a check condition to the prediction buffering
operation used in the rtc coding mode. This resolves a unit test
warning in example/vpx_tsvc_encoder_vp9_mode_7.
Change-Id: I9fd50d5956948b73b53bd8fc5a16ee66aff61995
This commit makes the speed -6 and above use the reconstructed
boundary pixels for precise intra prediction. This allows more
intra prediction modes to be tested in the non-RD coding process.
Enabling horizontal and vertical intra prediction modes can
improve the speed -6 compression performance for rtc set
by 0.331%.
Change-Id: I3a99f9d12c6af54de2bdbf28c76eab8e0905f744
This commit makes the RTC coding mode to conditionally skip the
reference frame mode search, when the predicted motion vector of
the current reference frame gives more than two times sum of
absolute difference compared to that of other reference frames.
It reduces the runtim by 1% - 4% for speed -5 and -6. The average
compression performance is improved by about 0.1% in both settings.
It is of particular benefit to light change scenarios. The
compression performance of test clip mmmovingvga.y4m is improved by
6.39% and 15.69% at high bit rates for speed -5 and -6, respectively.
Speed -5
vidyo1 16555 b/f, 40.818 dB, 12422 ms ->
16552 b/f, 40.804 dB, 12100 ms
nik 33211 b/f, 39.138 dB, 11341 ms ->
33228 b/f, 39.139 dB, 11023 ms
mmmoving 33263 b/f, 40.935 dB, 13508 ms ->
33256 b/f, 41.068 dB, 12861 ms
Speed -6
vidyo1 16541 b/f, 40.227 dB, 8437 ms ->
16540 b/f, 40.220 dB, 8216 ms
nik 33272 b/f, 38.399 dB, 7610 ms ->
33267 b/f, 38.414 dB, 7490 ms
mmmoving 33255 b/f, 40.555 dB, 7523 ms ->
33257 b/f, 40.975 dB, 7493 ms
Change-Id: Id2aef76ef74a3cba5e9a82a83b792144948c6a91
This commit makes the inter prediction buffer system to support
hybrid partition search. It reduces the runtime of speed -5 by
about 3%. No compression performance change.
vidyo1 720p 1000 kbps
11831 ms -> 11497 ms
nik 720p 1000 kbps
10919 ms -> 10645 ms
Change-Id: I5b2da747c6395c253cd074d3907f5402e1840c36
This commit changes to allow the usage of golden reference frame in
VP9 CBR mode to improve quality. VP9 supports potentially up to 8
reference buffers, it has reference buffers available for this
purpose. This was not possible in VP8 as golden and alt-ref buffers
were used for temporal scalability purpose in CBR mode in WebRTC.
For frames that update golden frame, there can be a quality boost.
The amount of allowed bitrate boost can be controlled via parameter
rc_max_inter_bitrate_pct. The inital value of the boost ratior is
currently based on over_shoot_pct. Further experiments will work
out the adaption of this boost value.
Change-Id: I0c5f010c8fd8b7b598f69779c1b30e5b2ac30a4d
The initialization of this_mode_pred does not work when the ref_frame
loop ever goes beyond LAST_FRAME. This commit fixes the subtle issue
and allows potentially expanding the loop to test GOLDEN_FRAME.
Change-Id: Ibbd427a22160d1d9eacb8ed0c87f88d6cef9c0f3
Using 4 threads, frame parallel decode is ~3x faster than single thread
decode and around 30% faster than tile parallel decode for frame parallel
encoded video on both Android and desktop with 4 threads. Decode speed is
scalable to threads too which means decode could be even faster with more threads.
Change-Id: Ia0a549aaa3e83b5a17b31d8299aa496ea4f21e3e
This commit refactors the rate distortion structure used in the
non-RD coding mode and saves a few RDCOST calculations.
Change-Id: I62c3416c300d2c5372f21b96d93a6b633a34ab3a
Reduce the intra_cost_penalty for non-rd mode,
and some updates to VAR_BASED_PARTITION.
Visual tests show some improvement at Speed 6, for RTC clips.
Change-Id: If9090daf7aed14906a32d931a538ab544bbca606
- Some fixes to surface fit.
- Returns variance function as cost rather than sad in the
pattern search and diamond search functions. Only
vp9_pattern_search_sad function used in bigdia search
uses sad as integer 1-away costs.
- Deploys SUBPEL_TREE_PRUNED_MORE for speed 4+.
Results:
derf [Speed 3]: About +0.036% in coding efficiency without any
discernible speed loss.
derf [Speed 4]: About 2-3% faster at -0.199% loss in coding efficiency.
derf [Speed 5]: About 3-4% faster at -0.149% loss in coding efficiency.
Change-Id: I8462f94f6adb46966ca964f2bd0400977357fd63
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
The functions b_width_log2 and b_height_log2 only do direct
table fetch. This commit unifies such use cases by using the
table directly and removes these functions.
Change-Id: I3103fc6ba959c1182886a2799d21b8b77c8a7b6b
mi_grid_* are arrays of pointer to pointer. They save the pointers that point
to the MIs in cm->mi. But they are unnecessary and complicated. The original
goal was to remove MODE_INFO_t copy. But with an extra MODE_INFO_t pointer
inside MODE_INFO_t, same goal could be achieved.
This commit totally removes the mi_grid_* structures. But there are still
many dummy MODE_INFO_t inside cm->mi which are a waste of memory. Next commit
will do on-demand MODE_INFO_t allocation in order to save these memories.
Change-Id: I3a05cf1610679fed26e0b2eadd315a9ae91afdd6
This commit allows the encoder to store outcomes of single reference
frame modes and compares them to decide if the inter prediction
filter, forward transform, and quantization can be skipped.
The compression performance of speed 3 is down
derf -0.364%
stdhd -0.198%
For test sequences, the speed 3 runtime is reduced
highway CIF 100 kbps, 51976 ms -> 45033 ms, 13% speed-up
stockholm 720p 1000 kbps, 71826 ms -> 67838 ms, 5.5% speed-up
pedestrian 1080p 2000 kbps, 154924 ms -> 150702 ms, 2.6% speed-up
Change-Id: I5aa26f918d2b4b5197a2c0afa2779319f1c88e44
Updates the vp9_pattern_search function to return integer one-away
neighbors' sad values, for subsequent use in speeding up the
sub-pel search. Also, removes code for the do_refine option
which is not being used currently.
Updates the integer and subpel functions to pass in a 5-element
sad list for output or input.
A new pruned sub-pel search algorithm is implemented that uses
the sad returned from the integer pel search. But it is not
deployed yet.
Change-Id: Ifa9f5ad024b5b660570366d2bd900343e1891520
The get_chessboard_index() used to call the entire VP9_COMMON
struct pointer to retrieve the chessboard pattern index. This cl
makes it call the frame index directly.
Change-Id: I3cad9d209ea2e77a358085a04fe1ff0ddec5ba03
In vp8, statistics are collected about the different modes as they are searched.
This process is more complicated due to the variable block size. Fields were
added to the PICM_MODE_CONTEXT struct to hold this information for each point in
the search. The information is then taken from the appropriate part of the tree
during denoising.
Change-Id: I89261ab77ad637821287ae157dfdf694702b8e77
This commit fixes a potential out-of-boundary memory access due to
the use of reuse_inter_pred_sby in the non-RD coding flow. It
resolves the corresponding asan error.
Change-Id: Iff605f5921230966990013541cd855d698810922
This commit fixes a mismatched use case of block size in non-RD
intra prediction check. The residual SSE and variance should be
calculated per transform block size, instead of operating block
size, which caused chrome valgrind warning on conditional jump
based on uninitialized value (webm issue 823). This commit
resolves this issue.
Change-Id: I595c06599c7e0fd0e4a08736519ba68fc14bc79a
This commit combined the full pel and sub pel motion search into a
single function to avoid code duplication. The commit does not change
encoder outputs.
Change-Id: Ibe18342c4f64073bef20f9cf6c6ca0a20d01bf0d
vp9_rdopt is for making rd optimal mode decisions. vp9_rd is for all
other rd related routines. Anything used outside of making an rd optimal
decision belongs in rd.
Change-Id: I772a3073f7588bdf139f551fb9810b6864d8e64b
As in VP8.
Currently, this parameter is set with the VP8E_SET_NOISE_SENSITIVITY flag.
The flag was not renamed so that we don't break the interface for webrtc. This
should probably be changed at some point in the future.
Change-Id: Ic73fcb0dde9d1d019e9d042050b617333ac65472
This commit added a speed feature to control the step_param used in
full pixel motion search. The intention is to reduced the search
steps for high speed real time coding.
Change-Id: I21d2f0105c2b647783a6688615da7fcf2b6d670b
Encoder still uses SWITCHABLE as default via DEFAULT_INTERP_FILTER,
but does not override the default if it is not SWITCHABLE.
Change-Id: I3c0f6653bd228381a623a026c66599b0a87d01d5
This commit enables an adaptive transform size selection method
for speed -6. It uses largest transform size when the sse is more
than 4 times of variance, i.e., most energy is compacted in the
DC coefficient. Otherwise, use the default TX_8X8. It improves
the compression efficiency for rtc set of speed -6 by 0.8%, no
speed change observed.
Change-Id: Ie6ed1e728ff7bf88ebe940a60811361cdd19969c
This commit enables a fast reference motion vector search scheme.
It checks the nearest top and left neighboring blocks to decide the
most probable predicted motion vector. If it finds the two have
the same motion vectors, it then skip finding exterior range for
the second most probable motion vector, and correspondingly skips
the check for NEARMV.
The runtime of speed -5 goes down
pedestrian at 1080p 29377 ms -> 27783 ms
vidyo at 720p 11830 ms -> 10990 ms
i.e., 6%-8% speed-up.
For rtc set, the compression performance
goes down by about -1.3% for both speed -5 and -6.
Change-Id: I2a7794fa99734f739f8b30519ad4dfd511ab91a5
This commit fixes the potential issue in the non-RD mode decision
flow that only checks part of the block to estimate the cost. It
was due to the use of fixed transform size, in replacing the
largest transform block size. This commit enables per transform
block cost estimation of the intra prediction mode in the non-RD
mode decision.
Change-Id: I14ff92065e193e3e731c2bbf7ec89db676f1e132
This commit replaces a few use cases of cpi->common with preset
variable cm, to avoid unnecessary pointer fetch in the non-RD
coding mode.
Change-Id: I4038f1c1a47373b8fd7bc5d69af61346103702f6
In real-time speed 6, no partition search is done. The inter
prediction results got from picking mode can be reused in the
following encoding process. A speed feature reuse_inter_pred_sby
is added to only enable the resue in speed 6.
This patch doesn't change encoding result. RTC set tests showed
that the encoding speed gain is 2% - 5%.
Change-Id: I3884780f64ef95dd8be10562926542528713b92c
Speed 6 uses small tx size, namely 8x8. max_intra_bsize needs to
be modified accordingly to ensure valid intra mode checking.
Borg test on RTC set showed an overall PSNR gain of 0.335% in speed
-6.
This also changes speed -5 encoding by allowing DC_PRED checking
for block32x32. Borg test on RTC set showed a slight PSNR gain of
0.145%, and no noticeable speed change.
Change-Id: I1502978d8fbe265b3bb235db0f9c35ba0703cd45
This is the first step to rework the rate-distortion modeling used
in rtc coding mode. The overall goal is to make the modeling
customized for the statistics encountered in the rtc coding.
This commit makes encoder to perform rate-distortion modeling for
DC and AC coefficients separately. No speed changes observed.
The coding performance for pedestrian_area_1080p is largely
improved:
speed -5, from 79558 b/f, 37.871 dB -> 79598 b/f, 38.600 dB
speed -6, from 79515 b/f, 37.822 dB -> 79544 b/f, 38.130 dB
Overall performance for rtc set at speed -6 is improved by 0.67%.
Change-Id: I9153444567e5f75ccdcaac043c2365992c005c0c
This commit enables a fast path computational flow for forward
transformation. It checks the sse and variance of prediction
residuals and decides if the quantized coefficients are all
zero, dc only, or more. It then selects the corresponding coding
path in the forward transformation and quantization stage.
It is currently enabled in rtc coding mode. Will do it for rd
coding mode next.
In speed -6, the runtime for pedestrian_area 1080p at 1000 kbps
goes down from 14234 ms to 13704 ms, i.e., about 4% speed-up.
Overall coding performance for rtc set is changed by -0.18%.
Change-Id: I0452da1786d59bc8bcbe0a35fdae9f623d1d44e1
Making this consistent with intra mode masks: you need to specify
allowed inter/intra modes to use.
Change-Id: Iaecd28bf79047259707d8e7a59a57bb7b856383e
Added a skipping test in non-rd inter-mode. After interpolation
prediction step, the residuals are tested to see if they will be
quantized to 0 based on modeling between spatial domain and
frequency domain.
Set static-thresh to 800 for >=720p and 300 for <720p, rtc set
tests showed
1. Speed 5, psnr: -0.514%; ssim: -1.748%;
speedup on related clips: 5% -11%
2. Speed 6, psbr: -0.628%; ssim: -1.637%;
speedup on related clips: 4% - 9%
Change-Id: I62fbf26bc043ecd2b584f255f1a4ee5ab52bfcf3
When the variance is far less than sse, the block is considered to
be under light change. All the energy is compacted into DC coeff
and can be coded at low cost. In such situation, switch the rate-
distortion modeling from sse+var based back to variance based.
Note that this is a temporary solution to handle the rare situations
where the scene light changes.
Change-Id: I1ee0fe2b9eda6b5fac40152e1841bf23f4d229fd
This commit introduces a chessboard pattern search for the prediction
filter type search. It runs extensive search in alternate blocks and
allows the rest blocks to refer coding decisions of their nearby
neighbors.
For pedestrian 1080p at 4000 kbps, the runtime of speed -5 goes down
from 43990 ms to 42200 ms. The overall compression performance for
RTC set is changed by -1.37%.
Change-Id: Icfe220c49451cda796f0ca91d935c9ed01e56c9d
This commit allows the non-RD mode decision flow to select
prediction filter type in NEWMV mode. It provides 8.14% compression
performance gains in both settings of AQ=0 and 3. The current speed
impact is about 5% to 10% slower.
Change-Id: Id66ecebf77abd8f90fb3f6a066c0e8dfb4bf1c42
This commit estimates the motion vector rate cost right after full
pixel motion search. It combines this and the mode cost and compares
the corresponding rate-distortion cost. If it is already above the
current best one, skip the rest sub-pixel motion search and modeling
process. For pedestrian_area 1080p at 4000 kpbs, the speed -5 runtime
goes down from 39425 ms -> 38399 ms.
Change-Id: If4cd7119fd6c266798d5cf1d19d19ab425e52a26
This commit reduces the frequency of frames using finer quantizer
in non-RD coding flow, and slightly tune up the quantizer resolution
when used. It provides 1.7% compression gains in speed -5 at no speed
difference.
Change-Id: I430249a51260a841a0402666e5ec1566e4f7d5a6
This commit enables a recursive partition type search for non-RD
mode decisions. It allows the encoder to choose variable block
sizes in a 64x64 block based on rate-distortion modeling.
It improves speed -6 coding efficiency for rtc set by 2.4%. Most
of the gains come from 32-40dB range, where many sequences gain
about 5% to 20%. Local tests suggest there is no speed change.
Change-Id: I06300016e500a21652812b7b3b081db39a783d66
The third pred_mv is stored in x->pred_mv[ref_frame]. This commit make
sure the correct mv is read.
Change-Id: Ibed24daf36703a63f0394c87b2381ee1d2eb7910
In non-rd pick_mode code, added mode skipping according to
thresholds. Used rd thresholds now, but we can modified them
later for real-time case.
RTC set borg test showed a 0.095% PSNR gain. For different rtc
clips, the real-time(speed 7) encoder speedup is 2% - 10%.
Change-Id: Ic72535c96b891092c662453be32d3168f7e34dcc
This is an initial attempt to allow variable block size partition
in non-RD coding flow. It tests 8x8, 16x16 and 32x32 block size per
64x64 block, all using non-RD mode decision and the associated rate
distortion costs from modeling, then selects the best block size to
encode the entire 64x64 block. Such operations are triggered every
other 3 frames. The blocks of intermediate frames will reuse the
collocated block's partition type.
It improves the compression performance by 13.2%. Note that the gains
are not evenly distributed. For many hard clips, the compression
performance is improved by 20% to 28%. Local speed test shows that
it will also increase runtime by 50%, as compared to speed -7. It is
now enabled in speed -6 setting.
Change-Id: Ib4fb8659d21621c9075b3c369ddaa9ecb0a4b204
This commit allows the non-RD mode decision process to return the
rate and distortion costs associated with the selected mode.
Change-Id: Ibe0f67d323f65839fd9cb0a726c1219bf7b55da9
Brings back most of Jim's previous patch for choosing
partitioning based on variance while making it compatible
with the current state of the code. Also adds a
nonrd_use_partition() function to recursively encode for any
arbitrary sb_type decisions within a 64x64 block; and
includes some refactoring.
Currently, when the VAR_BASED_PARTITIONING mode is turned on
for speed 7, there is a 10+% speed-up observed.
Experiments/improvements with this new partitioning method
will be conducted subsequently.
Change-Id: Ie6f43bfbde30583e941f450bf07c3b48828c9571
This commit adjusts the rate-distortion modeling for non-RD mode
decision. It puts more weights on energy from AC coefficients when
estimating the cost. The coding performance for rtc testset is
improved by 0.72%.
Change-Id: Ifa6ff11311a513ec2b10586589e82a9a21f6c61c
Assign interp_kernel value in MACROBLOCKD. This will be used to
select prediction filter coefficient sets and generate motion
compensated prediction.
Change-Id: I28c8dfb2dae6566f6939bb328aca5875c94bee65
Adds a fast diamond search which is about 5% faster than FAST_HEX
with only a 0.1% drop in psnr when turned on for both speeds 5 and 7.
This search is turned on for speed 7.
Change-Id: I497630aa88a5148926086bb3038e7975e5f4eb98
This commit allows the non-RD mode decision to skip mode RD modelling
check, if the motion vector associated with the current mode is
same as that of NEARESTMV mode. This makes speed -7 about 2% faster.
Previous change that converts cost metric from SAD to model based RD
value makes the codec 6% slower at speed -7.
Change-Id: I30cfec5452f606a671b8432a2f7f0c94fbb49fc8
The rate-distortion model in non-RD coding mode is only applied to
luma component. This commit removed a few redundant addition steps.
Change-Id: Id8edc0a47c2dbef8deba43debe2c95db39454de3
This commit replaces SAD cost with modeled rate-distortion cost
for non-RD mode decision. It translates the prediction residual
SSE into estimate rate and reconstruction distorion costs, hence
capturing the quantization setting effect. The compression
performance of speed -7 for rtc set is improved by 14.79%.
Change-Id: Ifda014eb0501d13109fe7f92680bf1410b463632
The core motion estimation fucntions all return sad now consistently.
The only exception is vp9_full_pixel_diamond(), however the core diamond
and refining search routines called from vp9_full_pixel_diamond() also
return SAD. If variance of pred error + mv cost is desired it must be
calculated explicitly outside these functions. For very fast encoding,
hopefully this will eliminate some redundant computations.
Also suggests reimplementing FAST_HEX with the vp9_pattern_search
framework. It is not exactly the same as the existing FAST_HEX, but
performance is slightly better and speed is very similar. Enables
removing a lot of duplicate code.
Change-Id: I152736393438c25bdf7e96b37cbb8ce330f4f94a
Adds a speed 8 to VP9 where only the nearestmv (0 mv) is searched.
This seems to be about the same speed as vp8 speed 5.
Adds a new speed feature to disable inter modes based on a mask for
each blocksize.
Adds code for having lower complexity motion search methods
in nonrd pick mode function, even though speed 7 still uses DIAMOND
search for now.
Also uses HEX search for speed 6 rather than FAST_HEX which improves
psnr by 0.56% without any noticeable speed drop (tested on gipsmotion).
Change-Id: Ic13176572dbd3aed5884a26786940a4b1bbd8a75
This commit checks if the motion vector associated with the current
mode has been computed in previous mode tests. If possible, skip the
redundant reference block generation and SAD calculation in the
non-RD mode decision process.
For test sequence pedestrian_area 1080p, the runtime goes from
24261 ms to 23770 ms. This does not change compression performance.
The speed-up is mostly around places with consistent motion.
Change-Id: I97be63c6a2d07c57be26b3c600fbda3803adddda
Added fast HEX search while doing non-rd partition picking to
speed up the encoder.
Borg test(speed 7) on rtc set showed 1.8% overall PSNR loss.
Encoder speedup was 5% - 15% for different rtc clips.
Change-Id: I9c83026eabc70b69fcc747c90369ec60bfa3ca24
As Yunqing suggested, this commit makes non-RD mode decision always run
sub-pixel motion search in NEWMV mode. The compression performance
gains becomes fairly significant after we enabled sub-pixel accuracy
motion compensated prediction to calculate SAD cost.
For test sequences pedestrian_area at 1080p and vidyo1 at 720p, the
runtime goes slower by 5%. For rtc test set, the compression performance
is improved by 21.20%.
Change-Id: I38cbfdd5c53d79423e1fafb3154f8ddeed63bbf0
This commit builds the actual prediction block in sub-pixel accuracy
and uses which to calculate SAD for non-RD mode decision. In the trail
run on pedestrian_area at 1080p, rtc speed -7 runtime goes from
23495 ms -> 25107 ms (7% slower). The compression performance is
improved by 20.57% for rtc test set.
Change-Id: I438589cd103fe99f1b50c2d1939ac6ca43fa0157
Use a set of dedicated variables to buffer the current best mode
in non-RD mode decision. This allows to use mode_info for more
complicated test in the non-RD process.
Change-Id: I6024c9feb0662afd3eb29f7017f7b5a5446f303f
This commit makes a refactoring of the rtc_use_partition. It allows
the encoder to take a preferred block size for non-RD mode decision.
The boundary blocks are handled such that smaller block sizes that
fit in the boundary size will be used instread.
In rtc mode, the coding performance of speed -6 for pedestrian_1080p
goes from
158980 b/f, 38.934 dB, 22721 ms to
159008 b/f, 40.064 dB, 23721 ms.
For rtc set, the speed -6 compression performance is improved by
26%. Still about 2dB behind speed -5 at this point.
Change-Id: If0944f0880eaf1ad340bc325d97cea8d0f9dd53f
