1. reduce the size of temporaray arrays on stack
2. avoid build_tree_distribution for tx size that is not used at all.
Change-Id: I0f8d7124e16a3789d3c15ad24cf02c1c12789e2c
This patch was to fix issue 924:
https://code.google.com/p/webm/issues/detail?id=924
The SECTION_RODATA macro was modified to support macho32 format.
The sub-pixel functions were modified to pass in 2 more parameters
to handle the global offsets for PIC build.
Change-Id: I3bfcd336bcae945edf300bca4ab40376a2628cd4
On Nexus 7 speed -6 saw ~18% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I70ccdea0326750552ed946fb004507d6efe02d5c
On Nexus 7 speed -6 saw ~15% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I4b2006b644c488f42bf06d8a22ef0e6120a96bf9
On Nexus 7 speed -6 saw ~30% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: Id12af7d1883243c23e6692e898aea82299633d58
Floating point is used in vp9_convert_qindex_to_q(), so sometime unit
test ActiveMapTest would cause run time error without properly call
to clear_system_state to reset register status.
Change-Id: I181e9395148c44a6ca8b97d6e109bd4a152143c6
Add distortion threshold condition to refresh state of a coding block,
and allow for qp adjustment also for some intra modes and non-zero motion modes.
Also some code cleanup (remove unused variables/code).
Change-Id: I735fa2b28bc64f60e0323976b82510577b074203
Currently disabled by default: enabled using
#define GROUP_ADAPTIVE_MAXQ
In this patch the active max Q is adjusted for each GF
group based on the vbr bit allocation and raw first pass
group error.
This will tend to give a lower q for easy sections
and a higher value for very hard sections. As such it is
expected to improve quality in some of the easier
sections where quality issues have been reported.
This change tends to hurt overall psnr but help
average psnr. SSIM also shows a small gain.
Average results for derf, yt, std-hd and yt-hd test sets were
as follows (%change for average psnr, overal psnr and ssim):-
derf +0.291, - 0.252, -0.021
yt +6.466, -1.436, +0.552
std-hd +0.490, +0.014, +0.380
yt-hd +5.565, - 1.573, +0.099
Change-Id: Icc015499cebbf2a45054a05e8e31f3dfb43f944a
On Nexus 7 speed -5 got ~2%, -6 got ~15%, -7 and -8 got ~30%
increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I83246d63b96674d170098a572fa4fe28a05aaf51
This commit replaces an integer divide with a table-lookup. It is
to improve decoding speed, and at the same time, to reduce possible
complications with a bug in AMD Family 12h processors:
"665 Integer Divide Instruction May Cause Unpredictable Behavior"
Change-Id: I678b707a538798a923850bac467e66e847e6def7
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
For low spatial resolutions: bias partittion selection to smaller block sizes,
and base the variance computation on 4x4 down-sampling.
Also move the threshold computations into the choose_partitioning,
so they are computed once for each sb block.
On low-res clips (RTC_derf) PSNR/SSIMetrics increase by about 4-5%.
No change for resolutions above CIF.
Change-Id: I93f8ff742c8044786977bb6e31dcf8efda6dd1b0
Just before a forced key frame we often get a foreshortened
arf/gf group. In such a case, we do not want to update
rc->last_boosted_qindex, which is used to define the Q range
for the forced key frame itself.
This gives a small average metrics gain for the YT and YT-HD sets
(eg. YT SSIM +0.141%).
Change-Id: Ie06698bc4f249e87183b8f8fb27ff8f3fde216d9
The comparison of address in the condition is not necessary, since
they will constantly be non-null.
Change-Id: Id0b0075283f5af65215d5761a8160a4cb2a15c9b
The SSE2 code is from VP8 MFQE, reuse it in VP9. No change on VP8
side. In our testing, we achieve 2X speed by adopting this change.
Change-Id: Ib2b14144ae57c892005c1c4b84e3379d02e56716
1. Added row-based loopfilter in encoder;
2. Moved common multi-threaded loopfilter functions from decoder
to common;
3. Merged multi-threaded loopfilter code, and made encoder/
decoder call same function to reduce code duplication.
Encoder tests showed that 1% - 2% speedup was seen for good-quality
2-pass mode(at speed 3); 1% - 3% speedup using 2 threads and 4% - 6%
speedup using 4 threads were seen for real-time mode(at speed 7).
Change-Id: I8a4ac51c2ad9bab9fa7b864e90743931c53ec1c4
This commit fixes a bug in denoiser reference frame buffer swap,
which disables frame buffer update.
Change-Id: I39a9427180fd18f9692602064ad821f7af4714c0
On Nexus 7 speed -5, -6, -7, and -8 saw about a 1% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 1.5%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: Ibf17ebfd952a6aec941719bd8306df8ec4574bee
On some platforms, such as 32bit Windows and 32bit Mac, the allocated
memory isn't aligned automatically. The thread data is aligned to
ensure the correct access in SIMD code.
Change-Id: I1108c145fe982ddbd3d9324952758297120e4806
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
On Nexus 7 speed -5, -6, -7, and -8 saw about a 15% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 10%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I2fa5315845e3021c9a6e2ea47e52e68b398d8334
Don't put small empty frame in front of a key frame. We will
put key frame flag in webm container if there's a visible key
frame. But there will be decoding error when we seek to here
if we put the small empty frame, which will be inter frame,
in front of it.
Change-Id: Id50c2c1fd31da0405ff6faa7375cc2f49c55402d
This commit added a field to vpx_image_t for indicating color space,
the field is also added to YUV_BUFFER_CONFIG. This allows the color
space information pass through the decoder from input stream to the
output buffer.
The commit also updated compare_img() function with added verification
of matching color space to ensure the color space information to be
correctly passed from encode to decoder in compressed vp9 streams.
Change-Id: I412776ec83defd8a09d76759aeb057b8fa690371
Add optimized Neon functions of:
vp9_variance32x64
vp9_variance64x32
vp9_variance64x64
On Nexus 7 speed -5 and -6 saw about a 4% increase in perf.
Speeds -7 and -8 saw about a 6% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I5a81f13c9897eb927fa39662530f5524a0f768fa
Replaced "color space" with "color format" in comments where color
sampling format is concerned, so to differentiate from the concept
defined in COLOR_SPACE.
Change-Id: I8c935034c166b24307a99352dab1686531276bb8
This commit refactors the motion compensated reference block fetch
process in denoiser. It skips the stage that generates motion
compensated reference block if denoiser decides to use copy block
mode. For high motion clips, this could speed up the denoising
process by about 10%.
Change-Id: I8ef4fa5fe766a8c4529119b9ec01faefb3d4ef53
Use frame buffer pointer swap instead of memcpy when possible.
These two CLs make the denoiser when running on vidyo1 720p at
speed -6 over 10% faster.
Change-Id: I64fe8a2422cafca6787a50c7f4dfb961191c0a9d
These two parameters are used to control the denoiser cut-off
thresholds. They should be properly initialized when starting
mode search of a given block.
Change-Id: Iba8a25487026a0dbe0d350c347d7e4e4e237b637
When qdiff is larger, the sad/variance threshold should also be
higher which indicates a more aggressive action on MFQE.
Change-Id: I44c5c93572805458d4f87fdc7619cc9d8a522185
The vp9_denoiser_free() function will internally check if the
buffer pointers are NULL. This commit makes the encoder always
call vp9_denoiser_free() after finishing encoding. It protects the
case where noise_sensitivity_level is changed during encoding
process and happen to be turned off towards the end of sequence,
which could result memory space allocated to denoiser not being
released.
Change-Id: Ie20dc2f2e6e5fb6333fbab3356bc153978a6a0f8
Use the correct frame size and stride value for chroma components
when setting the initial values. These control parameters are
assigned when the denoiser buffer was allocated and initialized.
Change-Id: Ia6318194c7738aff540bcbd34f77f0dac46221a1
Allocate the frame buffer allocation for denoiser once during the
encoder initialization. This avoids allocating frame buffer
multiple times and overwriting the buffer pointer without proper
releasing.
Change-Id: I9b3baa6283449d86fd164534d344c036bb035700
When testing frame sse to choose a loop filter value and
when checking ambient error in kf Q selection, use 64 bit
values for accumulating the sse, to avoid risk of overflow
for large image formats.
Change-Id: I03765d16c843d0ade61a45b0cd46312472697e57
Separate functions and rename files. This will make it easier to disable
some functions later to help work around a compiler issue in chromium.
Change-Id: I7f30e109f77c4cd22e2eda7bd006672f090c1dc5
This makes the inter_mode counts update consistent with other symbols.
Also, forward updates should work corerctly now.
Change-Id: Id98be26fd08875162e644bb8f1de6f0918f85396
With "show_existing_frame" frames:
Minimum data size for profile 0 and 1 is 1 byte (8bits)
Minimum data size for profile 2 and 3 is 2 bytes (9bits)
Otherwise:
Minimum data size is 8 bytes.
This resolves the VP9 failure in fuzzing test build #56.
Change-Id: I146d9d37688f535dd68d24aacc76d464ccffdf04
By using weighted averaging in the calculation of the frames to be
displayed, we get an average gain of more than 1 db for key frames
whose base qp are 20 higher than non-key frames.
Change-Id: I7bcb2e7b9c6420ea3f73f33204d18b072dffd17c
This commit fixes the buffer alignment control in denoised video
output function. The encoder is now able to properly store the
denoised input video into provided file when enabled.
Change-Id: I258e272c8d4a9b52592e16d6d09976c6f5c21728
Use mbmi->segment_id directly in vp9_pick_inter_mode. The value is
set outside this function, hence no need to assign it again.
Change-Id: I3d63cdd2e4fadf62ccdefada638b00d979eb3741
Check if block size is below 8x8 for rectangular block coding. It
is added to support 4x8 and 8x4 block coding for RTC mode.
Change-Id: I760b328f45b98ae48adc45ed5a39fb643cd8aebd
This commit simplifies the reference motion vector part for sub8x8
block coding in RTC mode and reduces the required local variables.
Change-Id: I470d1482092563b68af22404dc1f497e7457b0a8
This commit enables sub8x8 inter block coding for RTC mode. The
use of sub8x8 blocks can be turned on by allowing
choose_partitioning function to select 4x4/4x8/8x4 block sizes.
Change-Id: Ifbf1fb3888fe4c094fc85158ac3aa89867d8494a
Properly set the corresponding scaling factor of the reference
frame in the non-RD mode decision process. This allows the mode
search process to account for the scaled reference frame when
selecting coding mode.
Change-Id: I9d41bff6931c98e5a82b413e37ac5e6e14b93b23
Local variables used at the setjmp() site need to be marked volatile.
Relevant excerpt from the 'man longjmp':
===============
The values of automatic variables are unspecified after a call to
longjmp() if they meet all the following criteria:
· they are local to the function that made the corresponding setjmp(3) call;
· their values are changed between the calls to setjmp(3) and longjmp(); and
· they are not declared as volatile.
===============
Change-Id: I093e6eeeedbf5f781d202248ca701ba2c29d3064
This commit adds a guard condition to the intra mode test skip
control in RTC coding mode. If all inter modes are skipped, force
the encoder to check intra mode. It avoids situations where the
encoder processes without properly assigning required mode
information.
Change-Id: Ibb349fee997d6584ce901d08b06e8df3ca9c01b1
Initial patch to remove get_zbin_mode_boost() and
cpi->zbin_mode_boost.
For now sets a dummy value of 0 for zbin extra pending
a further clean up patch.
Change-Id: I64a1e1eca2d39baa8ffb0871b515a0be05c9a6af
