For 1 pass cbr SVC: GOLDEN is the spatial reference,
better not to check for encoder_breakout on this reference.
Small positive ~0.075% (mostly neutral) gain in avgPSNR/SSIM metrics.
No observed change in encoder speed.
Change-Id: Ib337f16d6771105bf06384c6a23ad047fc690418
For the case when the number of temporal layers > 1,
the buffer levels (starting/optimal_buffer_level,
and maximum_buffer_size) were not scaled properly.
In vp9_update_layer_context_change_config():
when setting the layer-buffer levels, fix is to scale
the layer-target_bandwidth by the target_bandwidth
(which is the full stream bandwidth) instead of the
spatial_layer_target.
This is needed because prior to the call
vp9_update_layer_context_change_config(), set_rc_buffer_sizes()
is called which sets the buffer levels based on target bandwidth
(which is the full bandwidth for the SVC stream).
This fix properly sets the layer-buffer levels based on the
layer-bandwidth, and leads to better rate targeting.
Small/neutral change in avgPSNR/SSIM metrics on RTC set.
Change-Id: Ic0f4f7f3487c37b9a9adb4781ae5edfed7140a57
Control Flow Integrity [1] indirect call checking verifies that function
pointers only call valid functions with a matching type signature. This
change eliminates function pointer casts to make libvpx CFI-safe.
[1] https://www.chromium.org/developers/testing/control-flow-integrity
Change-Id: I7e08522d195a43c88cda06fa20414426c8c4372c
For reference frames: enable scale partition for
superblocks with low source sad or if bsize on lower-resoln
is at least 32x32.
Keep feature disabled for base temporal layer.
Small regression in avgPNSR/SSIM metrics, ~0.5-1%.
Speedup ~2-3% on mac for SVC (3 spatial/3 temporal layers) at speed 7.
Change-Id: I5987eb7763845b680059128b538bb5188be0cca5
When allow_partition_search_skip is set the two pass code
can optionally skip the partition search in the rd loop if the image
appears static (based on selection of 0,0 motion).
Unfortunately 0,0 motion does not necessarily mean that there are
no meaningful changes or that motion or intra modes will not be selected
in the second pass.
Disabling "allow_partition_search_skip" may hurt the encode speed a little
for a small number of clips but can have a big impact on compression.
The most notable example of this in our test sets is "bridge_close_cif"
where this change gives a gains of 18%, 12% and 16% in opsnr, ssim and
psnr-hvs.
Change-Id: I765e288b5c0cd82bce00a148e7653a21e9203024
Enable partition copy on boundary and scale blocks along the boundary.
Rename copy_partition_svc to scale_partition_svc.
Do not copy if the block crosses the boundary.
Change-Id: I37a04d48f11b15c4ea67facd7631193ec2f62150
Removal of parameters to and code in calc_frame_boost() that is no
longer required.
No change to results from previous patch.
Change-Id: Ic92da35613fdc247d22fddf24d09679fc5329017
The decay accumulator clause covers similar ground to the
new clause that tests the accumulated second reference error
so it has been removed to reduce complexity.
Change-Id: I4ec1cce32d72bd4ee463ad7def2831a68447d525
Add a clause to the breakout test for alt ref groups that
examines the size of the accumulated second reference
frame error compared to the cost of intra coding.
This clause causes a reduction in the average group length for many
clips. Alongside the change to the group length the minimum
boost is increased.
On balance the results are positive for psnr and psnr-hvs
but is negative for ssim/fast ssim for the smaller image formats.
Strong gains on some harder clips (eg ducks take off (midres) ~20%,
husky (lowres) 6-17%. Most of the negative cases are lower motion
clips. Subsequent patch hopefully will help with those.
Change-Id: Ic1f5dbb9153d5089e58b1540470e799f91a65dc4
Fix/cleaup the conditioning for usage of the reuse-lowres
partition feature.
Replace the non-reference condition with the top temporal
layer, and put this condition in the speed feature.
This prevents doing update_partition_svc() on every
VGA frame, instead it will now only do update for VGA in
the top temporal layer frames.
Also this makes it easier to test/enable this feature
for lower layer temporal frames.
Change-Id: Ia897afbc6fe5c84c5693e310bcaa6a87ce017be5
For new VP9 only content type adjust the rate distortion and ARF
filter based on the relative spatial variance of the source and
reconstruction.
In regards to the RD loop the method favors modes where the
reconstruction variance is similar to the source variance. However it
is currently only applied to regions where the source variance is quite
low.
For very low variance blocks it applies a further bias against intra
coding and large prediction block sizes (the later in particular limit
the usefulness of the loop filter).
The final part of this change is to lower the strength of the ARF
filter for blocks where the source has very low spatial variance, to
encourage some low amplitude texture or noise to pass through
the filter.
This change improves the retention of film grain and fine noise /
texture in spatially flat regions, but as expected causes a significant
drop in PSNR on many clips. This is to be expected because similar
but misaligned noise or texture will give a lower PSNR than a flat
noise free reconstruction. However, it is worth noting that most clips
show a strong gain in FAST SSIM.
The features are enabled on the vpxenc command line by setting
--tune-content=film.
VPX_ENCODER_ABI_VERSION bumped for this change and cvbr.
Change-Id: I26a4e4edfa3dc5cacead82fa701fe7a9118ccd0a
Removed three parameters that are no longer needed in calls
to calc_arf_boost() and associated minor changes.
No impact on encode results.
Change-Id: Ieaf31d0d2e1990b99cf69647170145a1bbfbb9fb
For choose_partitioning (speed >= 6): avoid computation
of minmax variance for non-reference frames in SVC.
Existing condition only avoided this for speed >= 8.
Combine that existing logic with non-reference condition.
Small speedup (~0.5-1%) for 3 layer SVC,
neutral change on avgPSNR/SSIM metrics.
Change-Id: I3e9f3a1af0647b15e475cf170d9402908d672ee5
Release frame buffers for non-ref when the decoder is destroyed.
Enable the non ref test.
BUG=b/68819248
Change-Id: Id87ef3b0a62318f9812e927cd957c05c859047fa
For SVC with 3 spatial layers:
Add feature to copy/upscale partition from middle spatial layer
to the upper/highest resolution, when superblock sad is not high.
Enabled for speed >= 7 and only for non-reference frames.
Speedup ~3-4%, small loss in avgPNSR/SSIM of ~1%.
Change-Id: I7f0a2716c0fde28bade0f86159d11b7e31d6ab8d
For a chosen interval "i" the existing arf boost calculation examined frames
+/- (i-1) frames from the current location in the second pass.
This change checks to make sure that the forward search does not extend
beyond the next key frame in the event that the distance to the next key
frame is < (i - 1).
Small metrics gains on all our test sets but these are localized to a few clips
(e.g. midres set psnr-hvs sintel -2.59% but overall average was only -0.185%)
Change-Id: I26fc9ce582b6d58fa1113a238395e12ad3123cf6
Added command line control of Corpus VBR.
The new corpus vbr mode is a variant of standard
VBR (end-usage=0) where the complexity distribution
mid point is passed in rather than calculated for a specific
clip or chunk.
The new variant is enabled by setting a new command line
parameter --corpus-complexity to a zero value. Omitting
this parameter or setting it to 0 will cause the codec to use
standard vbr mode.
The correct value for a given corpus needs to be derived
experimentally using a training set such that the average
rate for the corpus is close to the target value.
For example our using our low res test set with upper and lower
vbr limits of 50%-150% and a corpus complexity value of 650
gives a similar average data rate across the set to using standard
vbr. However, with the corpus mode easier clips will be allocated
fewer bits and harder clips more bits rather than having the same
rate target for all.
Change-Id: I03f0fc8c6fb0ee32dc03720fea6a3f1949118589
For nonrd_pickmode: if early_term is set there should be
no need to include UV in rdcost (when color_sensitivity is set).
Neutral change on RTC and RTC_derf metrics, for speed >= 5.
No change for ytlive metrics.
Very small speed gain (~0.5%) on some clips with strong color content.
Change-Id: Ifc00928ecd935fc71e94935ceef0ae7481249f07
Allow for compound prediction mode in nonrd_pickmode for ZEROMV.
For real-time encoding, 1 pass with non-zero lag-in-frames.
Added speed feature to control the feature.
Enabled for speed >=6 for now, under VBR mode.
avgPSNR/SSIM metrics positive on ytlive set, for speed 6:
some clips up by ~3-5%, some clips neutral gain, average gain
across clips is ~1%.
Small/negligible decrease in speed.
Change-Id: I7a60c7596e69b9a928410c5ee2f9141eecd8613d
Change type of sum_square_error from int64_t to uint32_t.
Change type of sum_error from int64_t to int32_t.
This reduces the stack usage from ~131K to ~87K.
BUG=b/68362457
Change-Id: I147d7c7b226bceb4f0817bb86848e1fa9d9ac149
Set adaptive_row_thresh_mt = 1 at speed >= 7,
for svc when multi-threading is used with row-mt.
This allow the adaptive_rd_thresh feature to be used
in the nonrd-pickmode.
~1-2% speedup for SVC encoding with small quality
loss (< 0.6%) on RTC set.
Change-Id: Iab9878dff117bccdaef3e4d0645165db9808cdfc
Note this change will trigger the different C version on SSSE3 and
generate different scaled output.
Its speed is 2x compared with the version calling vpx_scaled_2d_ssse3().
Change-Id: I17fff122cd0a5ac8aa451d84daa606582da8e194
Small inncrease the sad_thresh1, avoids some false
detection of possible scene changes within lag.
Small improvement in few clips on ytlive, otherwise neutral change.
Change-Id: Ia79b53bb657bbce65a7aac7d20666b6373d5af8b
Expose the threshold for setting key frame on cut,
and increase it for speed 5.
Also small adjustment to min_thresh.
No change in overall metrics or fps.
Small quality improvement and lower encode time on scene cuts.
Change-Id: I36e06ff3b26b6c29aede39c23fce454525fc9026
The initial allocation of bits in the two pass code to each frame
should be within the min max limits on the command line. However,
when forming an ARF group the cost of the ARF is shared by frames
in that group such that the residual bits for a frame could drop below
the min value. This change prevents the minimum being re-applied
after the cost of the ARF has been deducted as this may otherwise
cause low rate sections to overshoot their target.
Test runs comparing to a baseline run with min and max section pct
0-2000% vs one closer to the YT use case (50-150%) suggest that
this fix not only results in better rate control but also gives a better
rd outcome.
For example the HD set vs 0-2000% baseline (opsnr, ssim).
Old code (50-150): +0.751, +1.099
New code(50-150): +0.241, -0.009
Change-Id: I715da7b130bf53ba8aa609532aa9e18b84f5e2ef
For 1 pass vbr: use higher threshold on avg_sad
and force key frame under scene cut detection if
above the threshold. Allow it for speed >= 6 for now,
since it does not use the full nonrd_pickmode partition
(as in speed 5).
Improves quality somewhat on scene cut frames.
Neutral on overall metrics and fps for speed 6 on
ytlive set.
Change-Id: I12626f7627419ca14f9d0d249df86c7104438162
Change to the bit allocation within a GF/ARF group.
Normal VBR and CQ mode allocate bits to a GF/ARF group based of the mean
complexity score of the frames in that group but then share bits evenly between
the "normal" frames in that group regardless of the individual frame complexity
scores (with the exception of the middle and last frames).
This patch alters the behavior for the experimental "Corpus VBR" mode such that
the allocation is always based on the individual complexity scores.
Change-Id: I5045a143eadeb452302886cc5ccffd0906b75708
This patch makes further changes to support an experimental
corpus wide VBR mode that uses a corpus complexity
number as the midpoint of the distribution used to allocate bits
within a clip, rather than some average error score derived from the
clip itself.
At the moment the midpoint number is hard wired for testing and
the mode is enabled or disabled through a #ifdef. Ultimately this
would need to be controlled by command line parameters.
Change-Id: I9383b76ac9fc646eb35a5d2c5b7d8bc645bfa873
This reverts commit 9311ef18b4.
Reason for revert:
Notice small regression in some clips.
Will revisit in another change.
Original change's description:
> Speed >=5 real-time: add TM intra mode for high_source_sad.
>
> Small/neutral change in metrics or speed for ytlive.
> Some improvement in quality on frames with big content change.
>
> Change-Id: Ib3b0703a5f28ea6710e90324436e27598ab7384d
TBR=marpan@google.com,builds@webmproject.org,jianj@google.com
Change-Id: I9d8ec5195bb05ddf329d325699355185affb9b13
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
For 1 pass vbr: increase min_thresh slightly, and also add
condition on golden/arf update for using full nonrd_pick_partition.
Reduces possible false detection for scene cut detection.
Neutral/small change in metrics or speed for speed 5.
Change-Id: I388f4d9a56e3cc763e0148338c1bc0381e58ad76
Small/neutral change in metrics or speed for ytlive.
Some improvement in quality on frames with big content change.
Change-Id: Ib3b0703a5f28ea6710e90324436e27598ab7384d
Lower SAD threshold to select non_rd pickmode partition
at superblock level more often.
Small gain in metrics, small/negligible decrease in speed.
Change-Id: I0f728236b91a604e4ca7e02039adc54d5985c4dc
For 1 pass vbr speed >= 6: when REFERENCE_PARTITION is selected,
avoid doing the full nonrd_pickmode based partition.
No change in overall metrics or speed.
Reduces encode times on scene cuts by 10-20%.
Change-Id: I0310b1610cc1c83793a509e0a9059840e8f18308
For 1 pass vbr mode:
On no-show_frame/ARF: instead of skipping alt_ref_frame
completely in mode testing, allow for checking (0, 0) on alt_ref.
Small gain in metrics, ~0.18%, no change in speed.
Change-Id: I32a3c24faca64ab70dd5091071a0dc301db7dd1e
For 1 pass vbr: when significant content/scene change is detected
(high_source_sad = 1) reduce/turnoff the additional qdelta on the
active_worst_quality. This helps somewhat to reduce the occurrence
of large frame sizes and large encode times.
Allow it only when use_altef_onepass is enabled.
Neutral/no change on metrics.
Change-Id: I1dd97dd2ab892d65f707b841b27a5de300b714ea
For speed 6 real-time mode: use adapt_partition
on ARF frame instead of REFERENCE_PARTITION (which is slower).
This requires enabling compute_source_sad_onepass for no-show_frames.
Speedup of ~3-5% on some clips that heavily use ARF,
small loss (~0.2%) in quality on ytlive set.
Change-Id: Ib50acc97df06458244a6ac55d2bd882c30012536
Speed comparing with the one calling vpx_scaled_2d_neon()
~1.7 x in general
~2.8x for BILINEAR filter
BUG=webm:1419
Change-Id: I8f0a54c2013e61ea086033010f97c19ecf47c7c6
Scale 3x3 block instead of 16x16 block in each loop. Disabled by
default.
Benefits:
1. Reduced number of different phase_scaler from 16 to 3.
Optimization code will be smaller and faster.
2. Maximum phase_scaler drifting will be reduced from 5/16 to 1/24.
(The drifting is 1/(3*16) in each step.)
BUG=webm:1419
Change-Id: I59a1f7496d89a1b090498c935d30cfcf1d0c282b
For real-time mode. Move the switch to fixed partition
for is_src_frame_alt_ref so all speeds may use it
if use_altref_onepass is set.
Improves metrics by ~2% for ytlive set at speed 4
(where use_altref_onepass is currently used).
Change-Id: I033240386598c9dbd0364da89ccbcca64bc663ee
Only has effect when sf->use_altref_onepass is enabled,
as in that case scene detection is skipped for non-show frame
and so high_source_sad does not get reset to 0.
No change in metrics or speed.
Change-Id: I421f066d239341449c18826089e1810b9fc5967f
Add stats for past ARF usage, and use it to disable
ARF usage based on some conditions.
Overall improvement on ytlive set, reduces the regression
on the problem clips for this feature.
Only affects when sf->use_altref_onepass is enabled
(currently off by default).
Change-Id: I66267f227ea132dc86acb730e9882f85bead2cdb
This reverts commit 535b7b915a.
This is actually used in CBR to reset the rate control if high source sad is detected.
Original change's description:
> Remove the speed condition on scene detection in 1 pass code.
>
> Scene detection is used for VBR mode and for screen_content mode.
>
> It was also enabled for CBR mode via the speed condition,
> but currently the analysis in the scene detection is not used
> in CRB mode (similar computations are done locally at superblock level
> when the source_sad feature is enabled).
>
> For 1 pass code.
> No change in behavior. Small speed gain, ~0.5%.
>
> Change-Id: I59991d7ef2af320bea7af4b907596e057affa42f
TBR=marpan@google.com,builds@webmproject.org,jianj@google.com
Change-Id: Ib4e6b02047f75632503e7b0fc870af97fa9291c3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Scene detection is used for VBR mode and for screen_content mode.
It was also enabled for CBR mode via the speed condition,
but currently the analysis in the scene detection is not used
in CRB mode (similar computations are done locally at superblock level
when the source_sad feature is enabled).
For 1 pass code.
No change in behavior. Small speed gain, ~0.5%.
Change-Id: I59991d7ef2af320bea7af4b907596e057affa42f
'iter' parameter is being checked for NULL in every call to
decoder_get_frame which is quite pointless because it is always
going to be NULL unless the application changed it. The code works
as described only because vp9_get_raw_frame returns -1 on all
subsequent calls after the first.
Change-Id: Ic736b9e8fe36fc1430fc11d6a9b292be02497248
* changes:
Remove the unnecessary cast of (int16_t)cospi_{1...31}_64
Remove the unnecessary upcasts of (int)cospi_{1...31}_64
Change cospi_{1...31}_64 from tran_high_t to tran_coef_t
Add the condition frames_since_golden > 0 to the
early exit check for ARF usage in nonrd_pickmode.
This improves quality of first frame following ARF, where
frame_since_golden = 0.
Small/neutral gain in metrics for speed 6, neutral change in speed.
Only affects when USE_ALTREF_FOR_ONE_PASS is enabled.
Change-Id: I82e73e6ff6fc849e5ca5448563cb8a0515fe0cdc
A new bug was introduced in a80bdfd "Change sinpi_{1,2,3,4}_9 from
tran_high_t to int16_t". Reverted the change in this file.
BUG=webm:1450
Failed test C/TransHT.AccuracyCheck/26.
Change-Id: Id001f57aad811803ef7d367d2b2bc008d8499991
Modify simple_block_yrd condition in nonrd_pickmode for SVC:
allow it to be used also on base temporal_layer, only when
spatial_layer > 1 and block size < 32x32.
Speed up of about ~2% for 3 layer SVC, with little/negligible
loss in quality.
Change-Id: I7734bdae51cf51f22b96f6b2b27da20ea1d84344
Fix the setting to frames_till_gf_update_due, and
adjust the limit value.
Only affects when USE_ALTREF_FOR_ONE_PASS is enabled.
Neutral change to metrics and speed for ytlive.
Change-Id: I266d9a00b36221bc8602fa2746d4e8a8f7d4dfae
Only when USE_ALT_REF_ONE_PASS is enabled (off by default).
Force fixed partition to 64x64 when is_src_alt_ref_frame is true,
and don't force early exit for some modes in nonrd_pickmode
for ARF noshow frames.
Small gain ~0.2% on ytlive metrics for speed 6.
Neutral speed difference.
Change-Id: I27eb6622d0453c09a06ccdc3b16368762474d11d
In the new AUTO mode, restrict the minimum alt-ref interval and max column
tiles adaptively based on picture size, while not applying any rate control
constraints.
This mode aims to produce encodings that fit into levels corresponding to
the source picture size, with minimum compression quality lost. However, the
bitstream is not guaranteed to be level compatible, e.g., the average bitrate
may exceed level limit.
BUG=b/64451920
Change-Id: I02080b169cbbef4ab2e08c0df4697ce894aad83c
Also add column headings so that the output can still be parsed if the
set of headers changes later.
Change-Id: I4beaf266521e093db4acf5f715b18fdfb7e3d1cd
Scale 3x3 block instead of 16x16 block in each loop.
Benefits:
1. Reduced number of different phase_scaler from 16 to 3. Optimization code
will be smaller and faster.
2. The maximum phase_scaler drifting will be reduced from 5/16 to 1/24.
(The drifting is 1/(3*16) in each step.)
BUG=webm:1419
Change-Id: Ibb9242a629ddb03e1ff93b859bece738255e698c
The intra mode rd penalty was implemented as a rate penalty.
Code was added to scale the penalty according to block size but
this was not done correctly for the SB level or sub 8x8.
The code did a weird double scaling in regard to bit depth that
has been removed. Given that it is a rate penalty the bit depth
should not matter.
This bug fix improves average metrics on our standard test
sets by about 0.1%
Change-Id: I7cf81b66aad0cda389fe234f47beba01c7493b1e
Move class VpxScaleBase to new file test/vpx_scale_test.h.
Add new file test/vp9_scale_test.cc with ScaleFrameTest.
BUG=webm:1419
Change-Id: Iec2098eafcef99b94047de525e5da47bcab519c1
Neutral on rtc set for speed 8. Neutral on ytlive for speed 5.
Saves some computation cycles but no speed gain observed on Pixel.
Change-Id: I34c4642cd543aa89c5b9c4bff6b7113577c64c91
Rev d147771 fixed the test failure. So remove the resolution condition
for using source_sad in speed 6.
BUG=webm:1452
Change-Id: I1efba97e1ef5bd4de5f886299f6fcb907187abcd
Enable adapt_partition for vbr mode for speed 6.
This allows the usage of the pickmode-based partition
(used in speed 5), but only selectively for superblocks
with high source sad, otherwise the faster variance based
partition scheme is used.
For speed 6 on ytlive set: avgPSNR/SSIM metrics up by ~0.6%,
several clips up by ~1.5%. Small/negligible decrease in speed.
Change-Id: I12f3efef6b3e059391de330fdbe5a44c2587f1f8
For SVC at speed >= 7: only use the improved mv search
on base spatial layer, if top layer resolution is above 640x360.
~2.3% speedup
Small/negligible loss in avgPSNR metrics on rtc set.
Change-Id: Iaef75a57ebf1c248931bc1aa28d20b7fecac1851
For speeds < 7, increase threshold that controls the split
of 16x16->8x8 blocks, for resolutions 720p and higher.
Minor change for speed 5 (since it uses reference partition scheme
which only uses variance partition as first step).
For speed 6: ~0.5% increase in avgPSNR/SSIM metrics on ytlvie set.
No change in speed.
Change-Id: I5126580973201538d8ca26a9256b93c4d11d685b
About 4x faster when values are below the dequant threshold and 10x
faster if everything needs to be calculated.
Both numbers would improve if the division for dqcoeff could be
simplified.
BUG=webm:1426
Change-Id: I8da67c1f3fcb4abed8751990c1afe00bc841f4b2
This feature is used for the CBR RTC encoding mode
at speed >= 6. This change will exclude it for VBR mode.
For speed 6 live encoding (VBR):
avgPSNR/SSIM metrics on ytlive set up by ~1% (few clips up by 2/3%).
No change in speed.
Change-Id: I1a0dd94c334f7df309ab5a48d477d7e25355b798
This should probably be handled before vp9_regular_quantize_b_4x4 even
gets called.
Fixes an assert resulting from removing skip_block from the quantize
functions.
BUG=webm:1459
Change-Id: I7f52b53f959b4654b3d4517ebda31a678f4d0fde
This condition is handled before this code is reached. The ssse3 version
of the function has always crashed when attempting to handle the
skip_block condition.
Add assert() and comments regarding the usage of skip_block.
Removing the parameter is a fairly involved process so leave it be for
the moment.
Change-Id: Ib299f6fc6589d7ee102262cc74a7aeb60110bc5a
Despite abs_coeff being a positive value, all the other implementations
treat it as signed which simplifies restoring the sign.
HBD builds cast qcoeff to avoid a visual studio warning. Match
vp9_quantize.c style of casting the entire expression.
Change-Id: I62b539b8df05364df3d7644311e325288da7c5b5
Having a very low "lag_in_frames" value could cause the encoder to create
incorrect / corrupt ARF groups including displayed frames that update the
ARF buffer and false overlay frames that are coded at low rate but are not
actually overlays of a real ARF frame.
This is linked to a reported unit test "slow down" where the chosen parameters
(lag of 3 frames) gave rise to such "broken" ARF group(s).
See also BUG=webm:1454
Change-Id: If52d0236243ed5552537d1ea9ed3fed8c867232c
Some clips in nightly unit test exhibiting significant encoder slowdown which
appears to bisect to Change-Id: I692311a709ccdb6003e705103de9d05b59bf840a.
The above change allowed for emergency iterations of the recode loop and
adjustment of the Q range if there is a large rate miss.
This patch disables the above adaptation for cases of cpu_speed >= 3 or more
specifically where cpi->sf.recode_loop >= ALLOW_RECODE_KFARFGF.
For speeds >= 3 the code does not currently run a dummy bit pack operation
inside the recode loop. Without this dummy pack operation there is no up to
date estimate of the current frame's size to use as a basis for assessing the
requirement for a recode. In practice it was using the previous frames size (or 0
for the first frame) which could cause odd behavior.
If we require the emergency rate correction added in Change-Id: I6923.. for
the higher speed settings it will be necessary to enable the dummy pack
which will in turn hurt encode speed.
BUG=webm:1454
Change-Id: I4fb3c6062ca9508325a6f31582f8e80f1a9b126f
Change legacy vp8/9_write_yuv_frame to vpx_write_yuv_files.
Delete some flags that can be enabled during build.
To enable writing denoised YUV, use the following command line:
CFLAGS='-DOUTPUT_YUV_DENOISED' ./configure
--enable-vp9-temporal-denoising
For skinmap, use CFLAGS='-DOUTPUT_YUV_SKINMAP'
Change-Id: I236974ac8b3cf279d20c4dc7f6162d8b480b6528
