This commit enables a chessboard pattern for partition search. All
the black blocks run regular partition search ranging from 8x8 to
32x32. The rest white blocks take the nearby blocks' information
to adaptively decide the effective search range.
The compression performance for rtc set at speed -5 is down by 1.5%.
For pedestrian 1080p at speed -5, the runtime goes from 41594 ms to
39697 ms, i.e., about 5% faster.
Change-Id: Ia4b96e237abfaada487c743bca08fe1afd298685
Fixes the idecoder in the case where:
cm->error_resilient_mode == 0, and
cm->frame_parallel_decoding_mode == 0, but
new_fb->corrupted == 1.
The assert in debug_check_frame_counts fails to
take into account the case of a corrupt frame.
Change-Id: Idf318a68458cc88d65d6f3f408a10d8ffe87e43f
* changes:
Turn on unit tests for SSSE3 8x8 forward and inverse 2D-DCT
Change eob threshold for partial inverse 8x8 2D-DCT to 12
SSSE3 8x8 inverse 2D-DCT with first 10 coeffs non-zero
tx_mode supercedes whatever mechanism is used to push for 16x16
allowing for the use of the 4x4 transform.
Change-Id: I6c3f05ab9fe52050e40cc6303de9334653763289
We only used two members from that struct: max_threads and inv_tile_order.
Moving them directly to VP9Decoder struct.
Change-Id: If696a4e5b5b41868a55f3cc971e1d7c1dd9d5f69
The scanning order has the first 12 coefficients of the 8x8 2D-DCT
sitting in the top left 4x4 block. Hence the partial inverse 8x8
2D-DCT allows to handle cases with eob below 12.
The overall runtime of the inverse 8x8 2D-DCT unit is reduced from
166 cycles (using SSE2) to 150 cycles (using SSSE3).
Change-Id: I4514f9748042809ac84df4c14382c00f313f1cd2
vp9_is_upper_layer_key_frame() definition does not match declaration--
it was missing the second const.
Change-Id: I71312579eb443be1924b8b06d8b3177c3dcb40f3
This commit enables ssse3 assembly implementation of the 8x8
inverse 2D-DCT with only first 10 coefficients non-zero. The
average runtime for this unit goes down from 198 cycles to 129
cycles (34.8% faster).
Change-Id: Ie7fa4386f6d3a2fe0d47a2eb26fc2a6bbc592ac7
Merged minq tables for arf and gf cases.
These tables were almost the same and for
VBR the arf table was not used at all.
Change-Id: Ie3c87e91dab613cf06f6945ac1ace0e0e4213d34
Small adjustment to the active Q range calculations.
These changes should slightly extend the available Q range
for KF/GF/ARF and narrow it for other frames.
The results for this change in isolation are broadly positive
for SSIM and average PSNR and slightly up but mixed for opsnr.
derf +0.293% opsnr, +1.286% SSIM
std-hd + 0.528% opsnr, + 1.746% SSIM
yt +0.056% opsnr, +0.457% SSIM
yt-hd -0.147% opsnr, + 0.226% SSIM
Change-Id: If065280342027ecc5d44b49fc1d440dfef041002
Includes changes that are not compatible with VS windows builds.
Amongst other things stdint.h is not supported in VS.
This reverts commit 89fbf3de50.
Change-Id: Ifa86d7df250578d1ada9b539c9ff12ed0c523cdd
When the variance is far less than sse, the block is considered to
be under light change. All the energy is compacted into DC coeff
and can be coded at low cost. In such situation, switch the rate-
distortion modeling from sse+var based back to variance based.
Note that this is a temporary solution to handle the rare situations
where the scene light changes.
Change-Id: I1ee0fe2b9eda6b5fac40152e1841bf23f4d229fd
The rounding of the ARNR filter output prior to
normalization by the filter strength was incorrect
when strength = 0.
In this case 1 << (strength - 1) would not create the
required rounding of 0, rather it would outrange. This
patch fixes this issue.
Change-Id: I771809ba34d6052b17d34c870ea11ff67b418dab
This commit enables SSSE3 version full inverse 8x8 2D-DCT and
reconstruction. It makes the runtime of vp9_idct8x8_64_add down
from 256 cycles (SSE2) to 246 cycles.
Change-Id: I0600feac894d6a443a3c9d18daf34156d4e225c3
When ARNR filtering is disabled, by setting
arnr_max_frames=0, mode_skip_mask was being set to
-1 for the ARF frame resulting in no mode being
selected for the block.
The intent is to restrict the reference frame to the
previous ARF frame and the mode to one of ZEROMV,
NEARMV or NEARESTMV.
Change-Id: Ifc3920b153142cd01d422910c94d2f20ffb6f129
On balance Deb's modified rate control for VBR seems
to be outperforming especially on some low motion YT
clips so I have switched this to be the default mode for
now.
Change-Id: I0713d430cad6425ac5c48fccdf332e12814ee44a
Assembly implementation of ssse3 8x8 forward 2D-DCT. The current
version is turned on only for x86_64. The average unit runtime
goes from 157 cycles down to 136 cycles, i.e., about 12.8% faster.
This translates into about 1.5% speed-up for pedestrian_area 1080p
at speed 2.
Change-Id: I0f12435857e9425ed7ce12541344dfa16837f4f4
This reverts commit 59e733ca81.
Hold off removing arnr_type to give users the opportunity
to change their script files to handle its deprecation. A
follow-up patch will mark the control for setting arnr_type
as deprecated and it will be removed completely in a later
revision of the code.
Change-Id: I8b817c744e144d3714234a4cd4309816d0c7e3e8
This member of VP9_COMP seemed unnecessary since it
only shadowed VP9EncoderConfig.key_freq that is
accessible through VP9_COMP.
Change-Id: Ib751bb1cf1b0b3c50a2a527d7c34f6829dd6fee3
The encoder was not handling requests to place keyframes at
fixed intervals, i.e. kf_min_dist == kf_max_dist, correctly.
In this case when looking to place the next keyframe it was
accumulating stats all the way up to the end of the firstpass
file. This patch corrects this behavior.
Change-Id: I948ad9f1d7faa0c05861df588136cce3bb61d7e7
This commit introduces a chessboard pattern search for the prediction
filter type search. It runs extensive search in alternate blocks and
allows the rest blocks to refer coding decisions of their nearby
neighbors.
For pedestrian 1080p at 4000 kbps, the runtime of speed -5 goes down
from 43990 ms to 42200 ms. The overall compression performance for
RTC set is changed by -1.37%.
Change-Id: Icfe220c49451cda796f0ca91d935c9ed01e56c9d
ARNR filtering is now forced to be centered on the ARF
frame and the other two options have been removed.
The other modes of constructing the ARNR frame were
not used and there does not seem to be any good
reason to maintain them.
This is purely an encoder-side change.
Change-Id: Ic772636d23f280752973852b9740083532a49de2
For speed 3 and above, such search is only allowed at speed 3.
The change helped cif and stdhd set by 1.2% and .7% in compression,
but increased the encoding time by around 5%.
Change-Id: Ifa4832327f1c1bef3decb032ceb769cbf50e059f
Adds test code to verify that supplemental superframe information
that precedes the normal superframe information will not break
decoding.
Change-Id: Ia252b887d7ee138f51dc9a778376ff739402c455
The end_useage parameter is confusingly named since it
now actually defines the rate control method used.
Change-Id: I98912caabfe556b7af0b939a645d1336409e4d71
This commit enables a background detection approach for adaptive
quantizer control. It combines the cyclic refresh pattern and the
background information to determine the segment id for adaptive
quantizer selection, prior to the non-RD mode decision process.
It hence allows proper quantization information update for a more
precise rate-distortion modeling in the non-RD mode decision.
The compression performance of speed -5 for rtc set is improved
by 2.5%, at no speed change.
Change-Id: Ic3713e8ed9185b403b5b1679d19dabd57506d452
1. We didn't scale source image in lower layers so that
the stats are incorrect.
2. We didn't extend borders for re-constructed image.
Change-Id: Ia8d7bafbdb695ffa7f504e171f9449812e7bb0a3
