Extended ROI struct suitable for VP9.
ROI input from user is passed into internal struct and applied on every frame
(except key frame).
Enabled usage of all 4 VP9 segment features (delta_qp, delta_lf, skip,
ref_frame) via the ROI map input.
Made changes to nonrd_pickmode for the ref_frame feature.
Only works for realtime speed >= 5.
AQ_MODE needs to be turned off for ROI to take effect.
Change example in the sample encoder: vpx_temporal_svc_encoder.c to be suitable
for VP9.
Add datarate test.
Bump up ABI version.
BUG=webm:1470
Change-Id: I663b8c89862328646f4cc6119752b66efc5dc9ac
When compiling an app using libvpx in Xcode 9.2, a warning is
thrown in vpx_frame_buffer.h:
"Parameter 'new_size' not found in the function declaration"
Switching it to 'min_size' to match the comment text and the
callback type definition prototype resolves it.
Change-Id: I7a3e4a857c2007c2d0d390e22054d7bc85068aa1
vp9 does not support multi-res encoding, the request should not crash.
+ encode_api_test: unconditionally expose multi-res test
vpx_codec_enc_init_multi should fail independent of
CONFIG_MULTI_RES_ENCODING if not for the same reason.
Change-Id: I44fc58ef70ee4e0e482cb6a5736885f4cb2a8517
Without this applications cannot use the vpx_codec_control macro
for VP9_SET_SKIP_LOOP_FILTER. The tests only cover the underscored
version vpx_codec_control_().
Change-Id: I3e6c1888307b76636fdc1a8deae70b5c14238163
Denoise 2 spatial layes at most.
Add noise sensitivity level 2 for vp9 such that applications can control
whether to denoise the second highest spatial layer.
Add tests to cover this case.
Change-Id: Ic327d14b29adeba3f0dae547629f43b98d22997f
this is only meant for testing. along with --enable-experimental
--enable-spatial-svc require VPX_TEST_SPATIAL_SVC to be defined rather
than bumping the encoder ABI.
Change-Id: I7f34d9f60300fa31ccf22e1a4aa619392c391b2e
For new VP9 only content type adjust the rate distortion and ARF
filter based on the relative spatial variance of the source and
reconstruction.
In regards to the RD loop the method favors modes where the
reconstruction variance is similar to the source variance. However it
is currently only applied to regions where the source variance is quite
low.
For very low variance blocks it applies a further bias against intra
coding and large prediction block sizes (the later in particular limit
the usefulness of the loop filter).
The final part of this change is to lower the strength of the ARF
filter for blocks where the source has very low spatial variance, to
encourage some low amplitude texture or noise to pass through
the filter.
This change improves the retention of film grain and fine noise /
texture in spatially flat regions, but as expected causes a significant
drop in PSNR on many clips. This is to be expected because similar
but misaligned noise or texture will give a lower PSNR than a flat
noise free reconstruction. However, it is worth noting that most clips
show a strong gain in FAST SSIM.
The features are enabled on the vpxenc command line by setting
--tune-content=film.
VPX_ENCODER_ABI_VERSION bumped for this change and cvbr.
Change-Id: I26a4e4edfa3dc5cacead82fa701fe7a9118ccd0a
Added command line control of Corpus VBR.
The new corpus vbr mode is a variant of standard
VBR (end-usage=0) where the complexity distribution
mid point is passed in rather than calculated for a specific
clip or chunk.
The new variant is enabled by setting a new command line
parameter --corpus-complexity to a zero value. Omitting
this parameter or setting it to 0 will cause the codec to use
standard vbr mode.
The correct value for a given corpus needs to be derived
experimentally using a training set such that the average
rate for the corpus is close to the target value.
For example our using our low res test set with upper and lower
vbr limits of 50%-150% and a corpus complexity value of 650
gives a similar average data rate across the set to using standard
vbr. However, with the corpus mode easier clips will be allocated
fewer bits and harder clips more bits rather than having the same
rate target for all.
Change-Id: I03f0fc8c6fb0ee32dc03720fea6a3f1949118589
this has been set to max since:
f5c36a5ce VP9: turn on tile-columns and frame-parallel-mode by default
~v1.4.0
Change-Id: Ic796fc05abe73a58700ec50e3f8e72d3462898ec
this has been on by default since:
f5c36a5ce VP9: turn on tile-columns and frame-parallel-mode by default
~v1.4.0
Change-Id: I52017ab0157feaf429dce3d9e1af8a53bb5c1b65
This patch followed allow_exhaustive_searches feature modification and
continued to modify the encoder to achieve the determinism in the row
based multi-threaded encoding. While row-mt = 1 and using multiple
threads, the adaptive feature in encoder was disabled, which gave
BDRate gain(at speed 1, -0.6% ~ -0.7%; at speed 2, -0.46% ~ -0.59%),
but some encoder speed losses(7% ~ 10% at speed 1 and 3% ~ 6% at
speed 2). These speed losses were acceptable considering the speed
gains obtained from row-mt.
Change-Id: I60d87a25346ebc487a864b57d559f560b7e398bb
To prevent the motion vector out of range bug, added a motion vector unit
test in VP9. In the 4k video encoding, always forced to use extreme motion
vectors and also encouraged to use INTER modes. In the decoding, checked if
the motion vector was valid, and also checked the encoder/decoder mismatch.
The tests showed that this unit test could reveal the issue we saw before.
Change-Id: I0a880bd847dad8a13f7fd2012faf6868b02fa3b4
Moves the def from vpx_encoder.h -> vpx_codec.h. The defined value
is changed as part of this move.
Adds the value to decoder capabilities when CONFIG_VP9_HIGHBITDEPTH.
Change-Id: I7d61fc821cda29f1e32bb9b2b9ffd3d83966e419
new_mt is a very generic name that will get obsolete soon enough.
Since this is exposed as a codec control, renaming it to row_mt to
signify row level paralellism. Also renaming the ETHREAD_BIT_MATCH
codec control to ROW_MT_BIT_EXACT.
Change-Id: Ic7872d78bb3b12fb4cf92ba028ec8e08eb3a9558
While the new-mt mode is enabled(namely, allowing to use row-based
multi-threading in encoder), several speed features that adaptively
adjust encoding parameters during encoding would cause mismatch
between single-thread encoded bitstream and multi-thread encoded
bitstream. This patch provides a set_control API to disable these
features, so that the bit match bitstream is obtained in the unit
test.
Change-Id: Ie9868bafdfe196296d1dd29e0dca517f6a9a4d60
(yunqingwang)
1. Rebased the patch. Incorporated recent first pass changes.
2. Turned on the first pass unit test.
Change-Id: Ia2f7ba8152d0b6dd6bf8efb9dfaf505ba7d8edee
Allow for passing in the layer bitrates at command line.
Fix to allow passing in bitrate for each spatial-temporal layer.
Change to some default values for 1 pass cbr mode:
spatial scale and qp-max/min.
Small fixes to some build warnings.
Change-Id: I3f9a776262712480a6570bb863a835b2fc49935a
Control already exists for vp9, adding it to vp8.
Usage is only when error_resilient is off.
Added a datarate unittest for non-zero boost.
Change-Id: I4296055ebe2f4f048e8210f344531f6486ac9e35
the --enable-postproc-visualizer configure option remains as a no-op as
do the control names and values for compatibility
+ remove the corresponding debug flags from vpxdec: --pp-*
Change-Id: I4a001cd9962b59560d7d6bda6272d4ff32b8d37c
In the future this option will activate adaptive quantization special
for altref frames. Encoder will create the adaptive quantization map
on the basis of lookahead buffers similarity which is the estimate of
the future motion compensation performance.
Change-Id: Ia0088b3babb0f9a4899c79d8d819947ba5a03df2
development has moved to the nextgenv2 branch and a snapshot from here
was used to seed aomedia
BUG=b/29457125
Change-Id: Iedaca11ec7870fb3a4e50b2c9ea0c2b056a0d3c0
