MV sad cost error is only used in full-pixel motion search,
which only need full-pixel resolution instead of quarter-pixel
resolution. This change reduced mvsadcost table size, and
removed unneccessary pamameter passing since this table is
constant once it is generated.
Change-Id: I9f931e55f6abc3c99011321f1dfb2f3562e6f6b0
rather than look up rc in the zig zag table, embed it in the macro. this
also allows us to shuffle some values in the macro and keep *d in rsi
gains of about the same order as the obj_int_extract implementation: ~2%
Change-Id: Ib7252dd10eee66e0af8b0e567426122781dc053d
Address calculations moved from encodemb_arm.c file to neon
optimized assembly function to save cycles in function calls.
- vp8_subtract_b_neon_func replaced with vp8_subtract_b_neon
that contains all needed address calculations
- unnecessary file encodemb_arm.c removed
- consistent with ARMv6 optimized version
Change-Id: I6cbc1a2670b56c2077f59995fcf8f70786b4990b
Adds following ARMv6 optimized functions to encoder:
- vp8_subtract_b_armv6
- vp8_subtract_mby_armv6
- vp8_subtract_mbuv_armv6
Gives 1-5% speed-up depending on input sequence and encoding
parameters. Functions have one stall cycle inside the loop body
on Cortex pipeline.
Change-Id: I19cca5408b9861b96f378e818eefeb3855238639
now that we need asm_enc_offsets.c for x86 and arm and it is
harmless to build it for other targets, add it unconditionally
Change-Id: I320c5220afd94fee2b98bda9ff4e5e34c67062f3
Half pixel interpolations optimized in variance calculations. Separate
function calls to vp8_filter_block2d_bil_x_pass_armv6 are avoided.On
average, performance improvement is 6-7% for VGA@30fps sequences.
Change-Id: Idb5f118a9d51548e824719d2cfe5be0fa6996628
remove helper function and avoid shadowing all the arguments to the
stack on 64bit systems
when running with --good --cpu-used=0:
~2% on linux x86 and x86_64
~2% on win32 x86 msys and visual studio
more on darwin10 x86_64
significantly more on
x86_64-win64-vs9
Change-Id: Ib7be12edf511fbf2922f191afd5b33b19a0c4ae6
This declaration did not match the prototype_sad() prototype, but was
unused in this translation unit, so it is removed instead. Fixes
issue 290.
Change-Id: I168854f88a85f73ca9aaf61d1e5dc0f43fc3fdb3
Optimized fdct4x4 (8x4) for ARMv6 instruction set.
- No interlocks in Cortex-A8 pipeline
- One interlock cycle in ARM11 pipeline
- About 2.16 times faster than current C-code compiled with -O3
Change-Id: I60484ecd144365da45bb68a960d30196b59952b8
Thread synchronization was not correct when frame width was 1 MB.
Number of allocated encoding threads is limited by the sync_range.
There is no point having more because each thread lags sync_range MBs
behind the thread processing the row above.
http://code.google.com/p/webm/issues/detail?id=302
Change-Id: Icaf67a883beecc5ebf2f11e9be47b6997fdf6f26
A large number of functions were defined with external linkage, even
though they were only used from within one file. This patch changes
their linkage to static and removes the vp8_ prefix from their names,
which should make it more obvious to the reader that the function is
contained within the current translation unit. Functions that were
not referenced were removed.
These symbols were identified by:
$ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \
| sort | grep '^ *1 '
Change-Id: I59609f58ab65312012c047036ae1e0634f795779
The mmap allocation code in vp8_dx_iface.c was inconsistent.
The static array vp8_mem_req_segs defines two descriptors,
but only the first is real. The second is a sentinel and
isn't actually allocated, so vpx_codec_alg_priv is declared
with mmaps[NELEMENTS(vp8_mem_req_segs)-1]. Some functions
use this reduced upper bound when iterating though the mmap
array, but these two functions did not.
Instead, this commit calls NELEMENTS(...->mmaps) to directly
query the bounds of the dereferenced array.
This fixes an array-bounds warning from gcc 4.6 on
vp8_xma_set_mmap.
Change-Id: I918e2721b401d134c1a9764c978912bdb3188be1
Fixes implicit declaration warning for 'mach_task_self'. This change
is an update to Change I9991dedd1ccfddc092eca86705ecbc3b764b799d,
which fixed this issue for the decoder but not the encoder.
Change-Id: I9df033e81f9520c4f975b7a7cf6c643d12e87c96
The vp8_build_intra_predictors_mby and vp8_build_intra_predictors_mby_s
functions had global function pointers rather than using the RTCD
framework. This can show up as a potential data race with tools such as
helgrind. See https://bugzilla.mozilla.org/show_bug.cgi?id=640935
for an example.
Change-Id: I29c407f828ac2bddfc039f852f138de5de888534
Clean up vp8_init_config() a bit and remove null pointer case,
as this code can't be called any more and is not an adequate
trap anyway, as a null pointer would cause exceptions before
hitting the test.
Change-Id: I937c00167cc039b3aa3f645f29c319d58ae8d3ee
Issue 291 highlighted the fact that CQ mode was not working
as expected in 1 pass mode,
This commit fixes that specific problem but in so doing I also
uncovered an overflow issue in the VBR code for 1 pass and
some data values not being correctly initialized.
For some clips (particularly short clips), the resulting
improvement is dramatic.
Change-Id: Ieefd6c6e4776eb8f1b0550dbfdfb72f86b33c960
In multithreaded mode the loopfilter is running in its own thread (filter level
calculation and frame filtering). Filtering is mostly done in parallel with the
bitstream packing. Before starting the packing the loopfilter level has
to be calculated. Also any needed reference frame copying is done in the
filter thread.
Currently the encoder will create n+1 threads, where n > 1 is the number of
threads specified by application and 1 is the extra filter thread. With n = 1
the encoder runs in single thread mode. There will never be more than n threads
running concurrently.
Change-Id: I4fb29b559a40275d6d3babb8727245c40fba931b
The firstpass motion map consists of an 8-bit flag for
each MB indicating how strongly the firstpass code
believes it should be filtered during the second pass
ARNR filtering.
For long or large format material the motion map can
become extremely large and hamper the operation of
the encoding process.
This change removes the motion map altogether, leaving
the second pass to rely on the magnitude of the motion
compensated error to determine the filter weight to
use for the MB during ARNR filtering.
Tests on the derf set indicate that the effect of this
change is neutral, with some small wins and losses. The
motion map has therefore been removed based on
a cost/benefit evaluation.
Change-Id: I53e07d236f5ce09a6f0c54e7c4ffbb490fb870f6
The previous calculation of macroblock count (w*h)/256
is not correct when the width/height are not multiples of
16. Use the precalculated macroblock count from
cpi->common instead. This manifested itself as a divide
by zero when the number of pixels was less than 256.
num_mbs updated in estimate_max_q, estimate_q,
estimate_kf_group_q, and estimate_cq
Change-Id: I92ff98587864c801b1ee5485cfead964673a9973
Move the update of the loopfilter info to the same block where it
is used. GCC 4.5 is not able trace the initialization of the local
filter_info across the other calls between the two conditionals on
pbi->common and issues an uninitialized variable warning.
Change-Id: Ie4487b3714a096b3fb21608f6b0c74e745e3c6fc
1. Process 16 pixels at one time instead of 8.
2. Add check for both xoffset =0 and yoffset=0, which happens
during motion search.
This change gave encoder 1%~3% performance gain.
Change-Id: Idaa39506b48f4f8b2fbbeb45aae8226fa32afb3e
GCC 4.5 and 4.6 both issue a warning about the multi-line format
string introduced in bc9c30a0, which also changed the whitespace
in the associated stt file by line-wrapping the long format string.
Instead, use multiple string constants, which the compiler will
concatenate. This maintains the original formatting, but remains
legible within the standard line length.
Change-Id: I27c9f92d46be82d408105a3a4091f145f677e00e
Disable zbin boost in SPLITMV mode as intended. Was incorrectly looking
at vp8_ref_frame_order instead of vp8_mode_order when comparing against
SPLITMV. This condition should have always been false, as SPLITMV is
not in the range of valid reference frames.
Change-Id: I0408cc7595eff68f00efef6d008e79f5b60d14bf
In some cases where clips have been encoded with
borders (eg. some wide-screen content where there is a
border top and bottom and slide shows containing portrait
format photographs (border left and right)) key frames were
not being correctly detected.
The new code looks to measure cases where a portion of
the image can be coded equally easily using intra or inter
modes and where the resulting error score is also very low.
These "neutral" areas are then discounted in the key frame
detection code.
Change-Id: I00c3e8230772b8213cdc08020e1990cf83b780d8
This code extends what was previously done for GFs, to pick
cases where insertion of a key frame after a fade (or other
transition or complex motion) followed by a still section, will
be beneficial and will reduce the number of forced key frames.
Change-Id: If8bca00457f0d5f83dc3318a587f61c17d90f135
When the modified_error_left accumulator exceeds INT_MAX, an incorrect
cast to int resulted in a negative value, causing the rate control to
allocate no bits to that keyframe group, leading to severe undershoot
and subsequent poor quality.
This error was exposed by the recent change to the rolling target and
actual spend accumulators in commit 305be4e4 which fixed them to
actually calculate the average value rather than be re-initialized
on every frame to the average per-frame bitrate. When this bug was
triggered, the target bitrate could be 0, so the rolling target
becomes small, which causes the undershoot. The code prior to 305be4e4
did not exhibit this behavior because the rolling target was always
set to a reasonable value and was independent of the actual target
bitrate. With this patch, the actual target bitrate is calculated
correctly, and the rate control tracks as expected.
This cast was likely added to silence a compiler warning on a comparison
between a double (modified_error_left) and an int (0). Instead, this
patch removes the cast and changes the comparison to be against 0.0,
which should prevent the warning from reoccuring.
This fixes issue #289. Special thanks to gnafu for his efforts in
reporting and debugging this fix.
Change-Id: Ie5cc1a7b516c578a76c3a50c892a6f04a11621fe
This fixes an overflow problem in the frame error accumulators.
The overflow condition is extreme but did trigger when Frank B.
coded some high motion interlaced HD content.
The observed effect was a catastrophic breakdown of the rate
control leading to massive undershoot and poor bit allocation.
All the error values should really be unsigned but I will look at this
separately.
Change-Id: I9745f5c5ca2783620426b66b568b2088b579151f
Currently, when the video frame width is not multiples of 16, the
source buffer has a stride of non-multiples of 16, which forces
an unaligned load in SAD function and hurts the performance. To
avoid that, this change allocates source buffers to be multiples
of 16.
Change-Id: Ib7506e3eb2cea06657d56be5a899f38dfe3eeb39
In real-time mode, vp8_sad16x16 function is called heavily in
motion search part. Improvement of this function gives 1.2%
encoding performance gain (real-time mode, tulip clip).
Change-Id: I23c401fc40c061f732a9767e8d383737a179bd58
