The encoder defined about 4 set of similar functions to calculate sum,
variance or sse or a combination of them. This commit removed one set
of these functions, get8x8var and get16x16var, where calls to the later
function are replaced with var16x16 by using the fact on a 16x16 MB:
variance == sse - sum*sum/256
Change-Id: I803eabd1fb3ab177780a40338cbd596dffaed267
vp8_fast_quantize_b_pair_neon function added to quantize
two adjacent blocks at the same time to improve performance.
- Additional 3-6% speedup compared to neon optimized fast
quantizer (Tanya VGA@30fps, 1Mbps stream, cpu-used=-5..-16)
Change-Id: I3fcbf141e5d05e9118c38ca37310458afbabaa4e
Added preload instructions to armv6 encoder optimizations.
About 5% average speed-up on Tegra2 for VGA@30fps sequence.
Change-Id: I41d74737720fb71ce7a316f07555357822f3347e
vp8_fast_quantize_b_neon function updated and further optimized.
- match current C implementation of fast quantizer
- updated to use asm_enc_offsets for structure members
- updated ads2gas scripts to handle alignment issues
Change-Id: I5cbad9c460ad8ddb35d2970a8684cc620711c56d
Address calculations moved from encodemb_arm.c file to neon
optimized assembly function to save cycles in function calls.
- vp8_subtract_b_neon_func replaced with vp8_subtract_b_neon
that contains all needed address calculations
- unnecessary file encodemb_arm.c removed
- consistent with ARMv6 optimized version
Change-Id: I6cbc1a2670b56c2077f59995fcf8f70786b4990b
Adds following ARMv6 optimized functions to encoder:
- vp8_subtract_b_armv6
- vp8_subtract_mby_armv6
- vp8_subtract_mbuv_armv6
Gives 1-5% speed-up depending on input sequence and encoding
parameters. Functions have one stall cycle inside the loop body
on Cortex pipeline.
Change-Id: I19cca5408b9861b96f378e818eefeb3855238639
Half pixel interpolations optimized in variance calculations. Separate
function calls to vp8_filter_block2d_bil_x_pass_armv6 are avoided.On
average, performance improvement is 6-7% for VGA@30fps sequences.
Change-Id: Idb5f118a9d51548e824719d2cfe5be0fa6996628
Optimized fdct4x4 (8x4) for ARMv6 instruction set.
- No interlocks in Cortex-A8 pipeline
- One interlock cycle in ARM11 pipeline
- About 2.16 times faster than current C-code compiled with -O3
Change-Id: I60484ecd144365da45bb68a960d30196b59952b8
it's difficult to mux the *_offsets.c files because of header conflicts.
make three instead, name them consistently and partititon the contents
to allow building them as required.
Change-Id: I8f9768c09279f934f44b6c5b0ec363f7943bb796
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
- armv5te-none-rvct
- armv6-none-rvct
- armv7-none-rvct
To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.
Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.
Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
Change-Id: I6ca2d89f355839c4c770773c09fc69dcea7c1406
warning: implicit declaration of function
'vp8_variance_halfpixvar16x16_[h|v|hv]_neon'
'vp8_sub_pixel_variance16x16_neon_func'
In vp8_find_best_sub_pixel_step_iteratively(), many times xoffset
and yoffset are specific values - (4,0) (0,4) and (4,4). Modified
code to call simplified NEON version at these specific offsets to
help with the performance.
Change-Id: Iaf896a0f7aae4697bd36a49e182525dd1ef1ab4d
Use the fast quantizer for inter mode selection and the
regular quantizer for the rest of the encode for good quality,
speed 1. Both performance and quality were improved. The
quality gains will make up for the quality loss mentioned in
I9dc089007ca08129fb6c11fe7692777ebb8647b0.
Change-Id: Ia90bc9cf326a7c65d60d31fa32f6465ab6984d21
Per John's previous change, shrink TOKENEXTRA from 20 to 8 bytes
original: b7b1e6fb
reverted: 41f4458a
Also drop unused field from vp8_extra_bit_struct
Update ARM ASM to deal with this change. In particular, Extra is signed
and needs to be sign-extended when loaded.
Change-Id: Ibd0ddc058432bc7bb09222d6ce4ef77e93a30b41
This patch fixes the system dependent entries for the half-pixel
variance functions in both the RTCD and non-RTCD cases:
- The generic C versions of these functions are now correct.
Before all three cases called the hv code.
- Wire up the ARM functions in RTCD mode
- Created stubs for x86 to call the optimized subpixel functions
with the correct parameters, rather than falling back to C
code.
Change-Id: I1d937d074d929e0eb93aacb1232cc5e0ad1c6184
NEON has optimized 16x16 half-pixel variance functions, but they
were not part of the RTCD framework. Add these functions to RTCD,
so that other platforms can make use of this optimization in the
future and special-case ARM code can be removed.
A number of functions were taking two variance functions as
parameters. These functions were changed to take a single
parameter, a pointer to a struct containing all the variance
functions for that block size. This provides additional flexibility
for calling additional variance functions (the half-pixel special
case, for example) and by initializing the table for all block sizes,
we don't have to construct this function pointer table for each
macroblock.
Change-Id: I78289ff36b2715f9a7aa04d5f6fbe3d23acdc29c
The ARM version of vp8_hex_search() is a faster implementation
of the same algorithm. Since it doesn't use any ARM specific
code, it can be made the default implementation. This removes
a linking error.
Change-Id: I77d10f2c16b2515bff4522c350004e03b7659934
These functions were true duplicates of functions present in the
generic code. This fixes some of the link errors when building
with --enable-shared --enable-pic.
Change-Id: Idff26599d510d954e439207883607ad6b74df20c
The primary goal is to allow a binary to be built which supports
NEON, but can fall back to non-NEON routines, since some Android
devices do not have NEON, even if they are otherwise ARMv7 (e.g.,
Tegra).
The configure-generated flags HAVE_ARMV7, etc., are used to decide
which versions of each function to build, and when
CONFIG_RUNTIME_CPU_DETECT is enabled, the correct version is chosen
at run time.
In order for this to work, the CFLAGS must be set to something
appropriate (e.g., without -mfpu=neon for ARMv7, and with
appropriate -march and -mcpu for even earlier configurations), or
the native C code will not be able to run.
The ASFLAGS must remain set for the most advanced instruction set
required at build time, since the ARM assembler will refuse to emit
them otherwise.
I have not attempted to make any changes to configure to do this
automatically.
Doing so will probably require the addition of new configure options.
Many of the hooks for RTCD on ARM were already there, but a lot of
the code had bit-rotted, and a good deal of the ARM-specific code
is not integrated into the RTCD structs at all.
I did not try to resolve the latter, merely to add the minimal amount
of protection around them to allow RTCD to work.
Those functions that were called based on an ifdef at the calling
site were expanded to check the RTCD flags at that site, but they
should be added to an RTCD struct somewhere in the future.
The functions invoked with global function pointers still are, but
these should be moved into an RTCD struct for thread safety (I
believe every platform currently supported has atomic pointer
stores, but this is not guaranteed).
The encoder's boolhuff functions did not even have _c and armv7
suffixes, and the correct version was resolved at link time.
The token packing functions did have appropriate suffixes, but the
version was selected with a define, with no associated RTCD struct.
However, for both of these, the only armv7 instruction they actually
used was rbit, and this was completely superfluous, so I reworked
them to avoid it.
The only non-ARMv4 instruction remaining in them is clz, which is
ARMv5 (not even ARMv5TE is required).
Considering that there are no ARM-specific configs which are not at
least ARMv5TE, I did not try to detect these at runtime, and simply
enable them for ARMv5 and above.
Finally, the NEON register saving code was completely non-reentrant,
since it saved the registers to a global, static variable.
I moved the storage for this onto the stack.
A single binary built with this code was tested on an ARM11 (ARMv6)
and a Cortex A8 (ARMv7 w/NEON), for both the encoder and decoder,
and produced identical output, while using the correct accelerated
functions on each.
I did not test on any earlier processors.
Change-Id: I45cbd63a614f4554c3b325c45d46c0806f009eaa
Most of the code that actually uses these matrices indexes them as
if they were a single contiguous array, and coverity produces
reports about the resulting accesses that overflow the static
bounds of the first row.
This is perfectly legal in C, but converting them to actual [16]
arrays should eliminate the report, and removes a good deal of
extraneous indexing and address operators from the code.
Change-Id: Ibda479e2232b3e51f9edf3b355b8640520fdbf23
generic version got fixed, but not the arm version. fixes:
vp8/encoder/arm/mcomp_arm.c: In function 'vp8_full_search_sadx3':
vp8/encoder/arm/mcomp_arm.c:1208: warning: pointer targets in passing
argument 5 of 'fn_ptr->sdx3f' differ in signedness
vp8/encoder/arm/mcomp_arm.c:1208: note: expected 'unsigned int *' but
argument is of type 'int *'
and another unsigned change to keep the files similar
Change-Id: I1b6255dc3a03b90394a791ee0d15d8167d9454db
vp8_diamond_search_sadx4 isn't used in arm because there is no
corrosponding sdx4df as in x86. rather than keep it in sync with
../mcomp.c, delete it
vp8_hex_search had the original, more readable/understandable code if`d
out. it's also available in ../mcomp.c, so remove the dead copy
Change-Id: Ia42aa6e23b3a2e88040f467280befec091ec080e
Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.
Fixes issue #97.
Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
The assembly version of the quantizer has not been updated to match
the new exact quantizer introduced in commit e04e2935. That commit tried
to disable this code but missed the non-RTCD case.
Thanks to David Baker <david.baker at openmarket.com> for isolating the
issue and testing this fix.
Change-Id: I0e51492dc6f8e44d2c10b587427448bf94135c65
This replaces the approximate division-by-multiplication in the
quantizer with an exact one that costs just one add and one
shift extra.
The asm versions have not been updated in this patch, and thus
have been disabled, since the new method requires different
multipliers which are not compatible with the old method.
Change-Id: I53ac887af0f969d906e464c88b1f4be69c6b1206
When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.
Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
