Remove trailing commas to keep multiple elements on one line.
Add blank lines to prevent comments from being treated as blocks.
clang-format guards for struct with a comment in the middle.
Change-Id: I3bcb8313ae8aaf69179249a13b4087b1272cdbc0
Denoise 2 spatial layes at most.
Add noise sensitivity level 2 for vp9 such that applications can control
whether to denoise the second highest spatial layer.
Add tests to cover this case.
Change-Id: Ic327d14b29adeba3f0dae547629f43b98d22997f
Added command line control of Corpus VBR.
The new corpus vbr mode is a variant of standard
VBR (end-usage=0) where the complexity distribution
mid point is passed in rather than calculated for a specific
clip or chunk.
The new variant is enabled by setting a new command line
parameter --corpus-complexity to a zero value. Omitting
this parameter or setting it to 0 will cause the codec to use
standard vbr mode.
The correct value for a given corpus needs to be derived
experimentally using a training set such that the average
rate for the corpus is close to the target value.
For example our using our low res test set with upper and lower
vbr limits of 50%-150% and a corpus complexity value of 650
gives a similar average data rate across the set to using standard
vbr. However, with the corpus mode easier clips will be allocated
fewer bits and harder clips more bits rather than having the same
rate target for all.
Change-Id: I03f0fc8c6fb0ee32dc03720fea6a3f1949118589
Add stats for past ARF usage, and use it to disable
ARF usage based on some conditions.
Overall improvement on ytlive set, reduces the regression
on the problem clips for this feature.
Only affects when sf->use_altref_onepass is enabled
(currently off by default).
Change-Id: I66267f227ea132dc86acb730e9882f85bead2cdb
In the new AUTO mode, restrict the minimum alt-ref interval and max column
tiles adaptively based on picture size, while not applying any rate control
constraints.
This mode aims to produce encodings that fit into levels corresponding to
the source picture size, with minimum compression quality lost. However, the
bitstream is not guaranteed to be level compatible, e.g., the average bitrate
may exceed level limit.
BUG=b/64451920
Change-Id: I02080b169cbbef4ab2e08c0df4697ce894aad83c
Having a very low "lag_in_frames" value could cause the encoder to create
incorrect / corrupt ARF groups including displayed frames that update the
ARF buffer and false overlay frames that are coded at low rate but are not
actually overlays of a real ARF frame.
This is linked to a reported unit test "slow down" where the chosen parameters
(lag of 3 frames) gave rise to such "broken" ARF group(s).
See also BUG=webm:1454
Change-Id: If52d0236243ed5552537d1ea9ed3fed8c867232c
This code is unused in vp9. Only vp8 still contains references to
vpx_sad_NxMx[3|8] and only for sizes 16x16, 16x8, 8x16, 8x8 and 4x4.
Remove the remaining sizes and all the highbitdepth versions.
BUG=webm:1425
Change-Id: If6a253977c8e0c04599e25cbeb45f71a94f563e8
This could save some cycles since skin detection is used in multiple
places in vp9.
1~2% speed up on ARM.
Change-Id: I86b731945f85215bbb0976021cd0f2040ff2687c
Use it to limit NEWMV early exit in nonrd pickmode
Small change in RTC metrics, has some improvement
for high motion clips.
Change-Id: I1d89fd955e1b3486d5fb07f4472eeeecd553f67f
Add option in SVC to set the filter type and phase for
the frame level downsampling filters.
For 3 spatial layers: set downsampling filter type to bilinear
and set phase to 8, for lowest spatial layer.
Change-Id: Id81f4b1ba93db19c1cd37b6a46d1281a2c61bc43
Add a low-variance high-sumdiff to the superblock content state
and use it to limit the mv and bias some decisions in non-rd pickmode.
Only affects speed >= 6.
Reduces artifact for lighting changes.
Small/no difference in metrics on RTC set.
Change-Id: Ic84b2379fe0ae3fa71ae826ee6bae3eaf551a25b
This patch followed allow_exhaustive_searches feature modification and
continued to modify the encoder to achieve the determinism in the row
based multi-threaded encoding. While row-mt = 1 and using multiple
threads, the adaptive feature in encoder was disabled, which gave
BDRate gain(at speed 1, -0.6% ~ -0.7%; at speed 2, -0.46% ~ -0.59%),
but some encoder speed losses(7% ~ 10% at speed 1 and 3% ~ 6% at
speed 2). These speed losses were acceptable considering the speed
gains obtained from row-mt.
Change-Id: I60d87a25346ebc487a864b57d559f560b7e398bb
A previous patch turned on allow_exhaustive_searches feature only for
FC_GRAPHICS_ANIMATION content. This patch further modified the feature
by removing the exhaustive search limit, and made it no longer adaptive.
As a result, the 2 counts that recorded the number of motion searches
were removed, which helped achieve the determinism in the row based
multi-threading encoding. Tests showed that this patch didn't cause
the encoder much slower.
Used exhaustive_searches_thresh for this speed feature, and removed
allow_exhaustive_searches. Also, refactored the speed feature code
to follow the general speed feature setting style.
Change-Id: Ib96b182c4c8dfff4c1ab91d2497cc42bb9e5a4aa
The scaling filter with zero shift will give sub-sampling for
2x downsampling. Allow for a phase shift to get an averaging filter.
Usage is for source scaling in 1 pass SVC mode for 1:2 downscale.
Reduces aliasing in downsampled image.
Keep the phase to 0/off for now.
Change-Id: Ic547ea0748d151b675f877527e656407fcf4d51e
To prevent the motion vector out of range bug, added a motion vector unit
test in VP9. In the 4k video encoding, always forced to use extreme motion
vectors and also encouraged to use INTER modes. In the decoding, checked if
the motion vector was valid, and also checked the encoder/decoder mismatch.
The tests showed that this unit test could reveal the issue we saw before.
Change-Id: I0a880bd847dad8a13f7fd2012faf6868b02fa3b4
Refactor to split the 1 passs source sad computation into scene
detection (currently used for VBR and screen-content mode), and
superblock based source sad computation (used in non-rd CBR mode).
This allows the source sad computation for CBR mode to be
multi-threaded.
No change in compression.
Change-Id: I112f2918613ccbd37c1771d852606d3af18c1388
Change it to row based array to avoid the slow down cause by sync.
row-mt on, speed 8, 2 threads: ~4% speedup for VGA on ARM benefited
from adaptive_rd_threshold.
Change-Id: I887e65a53af20a6c4f48d293daaee09dab3512cf
For each superblock, keep track of how far from current frame
was the last significant content change, and use that (along
with GF distance), to turnoff GF search in non-rd pickmode.
Only enabled for speed >= 8.
avgPNSR on RTC/RTC_derf down by ~0.9/1.2.
Speedup on mac: ~3-5%.
Speedup on arm: 3.6% for VGA and 4.4% for HD.
Change-Id: Ic3f3d6a2af650aca6ba0064d2b1db8d48c035ac7
new_mt is a very generic name that will get obsolete soon enough.
Since this is exposed as a codec control, renaming it to row_mt to
signify row level paralellism. Also renaming the ETHREAD_BIT_MATCH
codec control to ROW_MT_BIT_EXACT.
Change-Id: Ic7872d78bb3b12fb4cf92ba028ec8e08eb3a9558
Increase the variance partition thresholds for superblocks that
have low sum-diff (from source analysis prior to encoding frame).
Use it for now only for speed >= 7 or for denoising on.
Small change on metrics for rtc set: less than ~0.1 avgPNSR decrease
on RTC set, for both speed 7 and 8.
Change-Id: I38325046ebd5f371f51d6e91233d68ff73561af1
(Yunqing Wang)
This patch implements the row-based multi-threading within tiles in
the encoding pass, and substantially speeds up the multi-threaded
encoder in VP9.
Speed tests at speed 1 on STDHD(using 4 tiles) set show that the
average speedups of the encoding pass(second pass in the 2-pass
encoding) is 7% while using 2 threads, 16% while using 4 threads,
85% while using 8 threads, and 116% while using 16 threads.
Change-Id: I12e41dbc171951958af9e6d098efd6e2c82827de
While the new-mt mode is enabled(namely, allowing to use row-based
multi-threading in encoder), several speed features that adaptively
adjust encoding parameters during encoding would cause mismatch
between single-thread encoded bitstream and multi-thread encoded
bitstream. This patch provides a set_control API to disable these
features, so that the bit match bitstream is obtained in the unit
test.
Change-Id: Ie9868bafdfe196296d1dd29e0dca517f6a9a4d60
Modified the encoding stage to have row level entry points with relevant
initializations and to access the token information at row level
Change-Id: Ife10e55a7c1a420ee906d711caf75002688d9e39
(yunqingwang)
1. Rebased the patch. Incorporated recent first pass changes.
2. Turned on the first pass unit test.
Change-Id: Ia2f7ba8152d0b6dd6bf8efb9dfaf505ba7d8edee
Only for speed >= 7, and affects skipping of intra modes.
Threshold is set low for now, needs to be tuned.
Small/no difference in metrics on rtc clips.
Change-Id: If9bdbd43f08d1f80407cdd2e9e5e96780dcd2424
Avoid quality loss when copying partition of superblock with large motions.
Maximum consecutively copied frames can be set (currently 5).
Change-Id: I11c30575514f02194c0f001444cf4021609e5049
Also set the flag to 1 when exit early choosing 64x64 block
such that skipping new mv for golden works in these scenerios.
Change the size of prev_segment_id to the number of superblocks
to save memory.
Borg test shows quality regression of 0.012% on average PSNR
and 0.035% on SSIM.
Change-Id: I5014224c8617d439d35c66ece3fed9ae30b31d23
If enabled denoiser will only denoise the top spatial layer for now.
Added unittest for SVC with denoising.
Change-Id: Ifa373771c4ecfa208615eb163cc38f1c22c6664b
Constraints on encoder config:
-target_bandwidth is no larger than 80% of level bitrate limit
-target_bandwidth * (1 + max_over_shoot_pct) is no larger than
88% of level bitrate limit
-min_gf_interval is no smaller than level limit
-tile_columns is no larger than level limit
Constraints on rate control:
-current frame size plus previous three frames' size is no larger
than the CPB level limit
-current frame size is no larger than 50%/40%/20% of the CPB
level limit if it's a key/alt-ref/other frame.
Change-Id: I84d1a2d6d6e3c82bfd533b3309ce999cfaba2c8b
Add feature to copy partition from the last frame.
The copy is only done under certain conditions that SAD is below threshold.
Feature is currently disabled, until threshold is tuned.
Feature will be initially used for Speed 8 (ARM).
Under extreme case of always copying partition for speed 8:
Encode time is reduced by 5.4% on rtc_derf and 7.8% on rtc.
Overall PSNR reduced by 2.1 on rtc_derf and 0.968 on rtc.
Change-Id: I1bcab515af3088e4d60675758f72613c2d3dc7a5
This patch modified the motion search counts used in:
https://chromium-review.googlesource.com/#/c/305640/
These 2 counts were originally added as thread data, and used to
make decisions in motion search. The tile encoding order can be
inconsistent while using different number of threads, which can
cause bitstream mismatch. Here moved them to tile data to solve
the issue.
BUG=webm:1322
Change-Id: Iedc4477aef1746aa0a4f84d88a1156296fd3ba87
Re-use the tile worker threads to pack the bitstream in parallel
on a per-tile basis. Restricting this to real-time only for now
(further testing is needed to ensure this does not make 2-pass
worse in any case).
BUG=webm:1309
Change-Id: I8a80da7c5089b837d0df79a5c49d5e3022dfc8ec
This reverts commit 9e8efa5b18.
this change causes ubsan warnings, failures in
vpxenc_vp9_webm_rt_multithread_tiled
BUG=webm:1309
Change-Id: I020c7be985c771bfff4b3de1afe51cc8edb980da
Re-use the tile worker threads to pack the bitstream in parallel
on a per-tile basis. Restricting this to real-time only for now
(further testing is needed to ensure this does not make 2-pass
worse in any case).
BUG=webm:1309
Change-Id: Ia2c982da56697756e12f02643f589189b3271d98
For 1 pass vbr real-time mode:
Allow for the usage of alt-ref frame when non-zero lag-in-frames is used.
Use non-filtered alt-ref, and select usage based on fast scene/content
analysis/detection within the lag of frames.
Positive gains on ytlive set: overall avgPSNR ~3-4%.
Several clips are up between 5-14%, a few clips are neutral/small change.
Current speed decrease is about ~5-10%.
Use the flag USE_ALTREF_FOR_ONE_PASS to enable this feature
(off by default for now).
Change-Id: I802d2bf3d44f9cf01f6d15c76be9c90192314769
Current commit is just an API template for the rest of the code, and
I will add inner logic later.
Altref frames generate a lot of bitrate and at the same time
other frames refer to them a lot, so it makes sense to apply
special compensation-based adaptive quantization scheme for altref
frames. E.g., for blocks that are good predictors for the future
apply rate-control chosen quantizer while for bad predictors apply
worse one.
Change-Id: Iba3f8ec349470673b7249f6a125f6859336a47c8
In the future this option will activate adaptive quantization special
for altref frames. Encoder will create the adaptive quantization map
on the basis of lookahead buffers similarity which is the estimate of
the future motion compensation performance.
Change-Id: Ia0088b3babb0f9a4899c79d8d819947ba5a03df2
For forced key frames in particular this helps to make them
blend better with the surrounding frames where noise tends
to be suppressed by a combination of quantization and alt
ref filtering.
Currently disabled by default under and IFDEF flag pending
wider testing.
Change-Id: I971b5cc2b2a4b9e1f11fe06c67ef073f01b25056
