factorizes the code in decode_tiles(). reading the offsets backwards
wasn't doing anything to prove tile independence
Change-Id: I0395d3c77205852ebdc55efedc68291e93cef85c
"keyframe" variable in the current code actually means that previous
frame is a keyframe because cm->frame_type has not been initialized
in read_uncompressed_header.
Change-Id: I5645b0816c70abdef5dfc70113018d06276dac77
replaces use of cur_tile_mi_(row|col)_(start|end) by VP9_COMMON, making
it less stateful and more reusable for parallel tile decoding
Change-Id: I1df09382b4567a0e5f4434825d47c79afe2399be
update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding
Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed
Splitting setup_inter_inter function into is_compound_prediction_allowed
and setup_compound_prediction. Moving setup_compound_prediction call
into read_comp_pred from read_uncompressed_header.
We should do the same in the encoder as well.
Change-Id: I40d75fdc4a221b2f7705df00d23a4b3fe79987c3
Assign the pointer to mode_info stream per tile. Remove the use of
tile_col in the decoding modules.
Change-Id: I7df87086708a3d92c5e20e86bcfb04e458ff47a6
This move is done to have all compressed header reading functions in one
place. Moved functions:
read_switchable_interp_probs
read_inter_mode_probs
read_comp_pred_mode
read_comp_pred
update_mv
read_mv_probs
Change-Id: I2aebb57d2826d03d11bf2f8fbbfc3a9978c4f9fb
The ref's scale_factors are set at frame level, and then copied for
each partition block. Since the struct members are mostly constant,
this patch separated the constant and non-constant members, and
reduced struct copying. This gave 0.5% ~ 1.4% decoder speed gain.
Change-Id: I94043bf5a6995c8042da52e5c661818dfa6f6d4c
This commit uses left_available flag to decide if the left mode_info
struct is available for left_block_mode. As discussed with James
Zern (jzern@), this prevents the codec from fetching mode_info from
blocks in the left tile, which although effectively not used might
present concerns for multi-threaded tile decoding.
This is NOT a bit-stream change.
Change-Id: I1dc8cf1bcbf056688eee27c7bc5706ac4b4e0125
We used set_partition_seg_context() only before calls to:
1. update_partition_context()
2. partition_plane_context()
Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.
Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9
missed one in vp9_detokenize.c in the last
+ add some asserts in vp9_decode_frame() to catch regressions
Change-Id: Ide67505114ee17efdafb13694aed0c09039e5a16
replace VP9D_COMP usage with the (slightly) more targeted
VP9_COMMON/MACROBLCKD/struct segmentation structures.
Change-Id: Iabb3616e231417b0e17b7e4b384ea63167a81745
Renames for consistency with other constants:
NUM_FRAME_TYPES -> FRAME_TYPES
NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS
Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f
in most cases at least the left column was a harmless race as it was
left unused later in the code.
Change-Id: I43211df66fb157c6feecf08c681add4fcf18b644
That makes decoder and encoder (only bitstream writing part) a little bit
simpler and faster. Moving get_sb_index() function to the encoder.
Change-Id: Ie91aaeefd69c84b085948267b33556a7666c6278
cherry-picked from:
commit 988b70844e03efcfcc075a9bc25d846670494f36
Author: Pascal Massimino <pascal.massimino@gmail.com>
Date: Fri Aug 2 11:15:16 2013 -0700
add WebPWorkerExecute() for convenient bypass
This is mainly for re-using the worker structs without using the
thread.
Change-Id: I8e1be29e53874ef425b15c192fb68036b4c0a359
Original source:
http://git.chromium.org/webm/libwebp.git
100644 blob c0d318aee628fdf9ba4876451a28aa978f1066b8 src/utils/thread.c
100644 blob c2b92c9fe353f8e514f78922f3d237204a9cbc66 src/utils/thread.h
Change-Id: I13fe92b1e94062bb99fdeeb7cb0b4b0575d27793
* changes:
Use a separate MODE_INFO stream for each tile column
Get rid of "this_mi", use "mi_8x8[0]" everywhere instead
Make the static_segmentation feature work again
The only case where they were intentionally pointing to different
structures was in mbgraph, and this didn't have the expected behavior
because both of these pointers are used interchangeably through the code
Change-Id: I979251782f90885fe962305bcc845bc05907f80c
Moving code that gets band_translate array from get_scan_and_band()
function to get_band_translate() function. Renaming get_scan_and_band() to
get_scan().
Change-Id: I43047c205a1ca2a6e24be44db39dc04b7a385008
Updated the encoder to handle frames that are coded
intra-only. Intra-only frames must be non-showable,
that is, the "show frame" flag must be set to 0 in
the frame header.
Tested by forcing the ARF frames to be coded intra-
only.
Note: The rate control code will need to be modified
to account for intra-only frames better than they
are currently handled.
Change-Id: I6a9dd5337deddcecc599d3a44a7431909ed21079
For bad input data, the decoder may access the array out of bounds. The
commit added clamp to prevent such out of bound access
Change-Id: I0a1cfd9b8786ea7113a998053c76605c963b077a
Values of MODE_UPDATE_PROB and VP9_COEF_UPDATE_PROB are equal, so replacing
them with one constant. Inlining appropriate arguments for functions:
vp9_cond_prob_diff_update (encoder)
vp9_diff_update_prob (decoder)
Change-Id: I1255a1cb477743b799b3bfbbcd8de6b32b067338
The idea is to have the following names for each transform size:
vp9_idct4x4_add
vp9_idct4x4_1_add
vp9_idct4x4_10_add
vp9_idct4x4_16_add
vp9_idct8x8_add
vp9_idct8x8_1_add
vp9_idct8x8_10_add
vp9_idct8x8_64_add
etc for 16x16, 32x32
The actual list of renames in this patch:
vp9_idct_add_lossless -> vp9_iwht4x4_add
vp9_short_iwalsh4x4_add -> vp9_iwht4x4_16_add
vp9_short_iwalsh4x4_1_add -> vp9_iwht4x4_1_add
vp9_idct_add -> vp9_idct4x4_add
vp9_short_idct4x4_add -> vp9_idct4x4_16_add
vp9_short_idct4x4_1_add -> vp9_idct4x4_1_add
Change-Id: I6f43f7437c68dd30cdd05d72e213765578ed30b1
Moving INTERPOLATIONFILTERTYPE enum and subpix_fn_table struct to
vp9_filter.h. Adding convenient typedef for subpel kernels.
Function vp9_setup_interp_filters() besides setting xd->subpix.filter_x &
xd->subpix.filter_y has a side effect of also setting scale factors. This
is not required inside decode_modes_b() because scale factors have been
already set by set_ref() calls. That's why replacing
vp9_setup_interp_filters() call with newly created vp9_get_filter_kernel()
call. The behavior of vp9_setup_interp_filters() is unchanged (it
is used from the encoder).
Change-Id: I3f36d3f7cd8d15195a6e2fafd1777cdaf9ecb847
Moving functions from vp9_idct_blk to vp9_idct because these functions are
used from both encoder and decoder. Removing duplicated code from
vp9_encodemb.c and reusing existing functions.
Change-Id: Ia0a6782f8c4c409efb891651b871dd4bf22d5fe8
