This commit allows the encoder to account for additional chroma
plane costs in the mode decision process, if the current block
potentially contains significant color change. It improves the
visual quality at very low bit-rates.
The compression performance of dark720p is improved by 12.39% in
speed 6. For jimred at 150 kbps, the PSNR of V component (red)
increased by 0.2 dB, at the expense of about 5% increase in
encoding time. Note that for sequences where the chroma components
are fairly consistent, the encoding time increase is negligible.
On average the rtc set compression performance is improved by
1.172% in PSNR and 1.920% in SSIM.
Change-Id: Ia55b24ef23a25304f7ec9958fbf07fd6e658505c
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
The first comment is obselete given the way is now normative in VP9
bitstream. The second comment line was too long.
Change-Id: I6546585babf60d466485ddcf2daa6d2fa79e999a
As reported in issue #850, the condition for border extension was not
complete. This commit added the case when the scaling is enabled.
This fixes issue #850.
Change-Id: I67768b23f0dcc4ac9a9aa0a0825b0fe8cb85a72e
mi_grid_* are arrays of pointer to pointer. They save the pointers that point
to the MIs in cm->mi. But they are unnecessary and complicated. The original
goal was to remove MODE_INFO_t copy. But with an extra MODE_INFO_t pointer
inside MODE_INFO_t, same goal could be achieved.
This commit totally removes the mi_grid_* structures. But there are still
many dummy MODE_INFO_t inside cm->mi which are a waste of memory. Next commit
will do on-demand MODE_INFO_t allocation in order to save these memories.
Change-Id: I3a05cf1610679fed26e0b2eadd315a9ae91afdd6
The issue was discovered on bitstream with 2x vertical downscale. For
zero MVs, y_pad is set to 1 only when vertical convolution is
required. The original code assumes that for y_step_q4 == 32 we don't
perform vertical convolution. But vp9_setup_scale_factors_for_frame()
sets convolve functions so that when x_step and y_step are both not
equal to 16, convolve in both directions is performed. And convolve()
unconditionally subtracts one stride from source pointer when calls
convolve_horiz(). This leads to invalid memory access.
Change-Id: I882dfa6081a58e172b5ffa55842bfcd6727f10bf
This breaks the profile 1 bitstream.
Don't force non420 uv transform size to 1/4 y size. In the 4:2:0 case the
chroma corresponding to a luma block is 1/4 its size. In the 4:4:4 case
chroma and luma planes are the same size. Disallowing larger transforms
can result in a loss of compression efficiency and is inconsistent.
For sub-8x8 blocks only average corresponding motion vectors.
4:2:0 and profile 0 behavior remains unchanged.
Change-Id: I560ae07183012c6734dd1860ea54ed6f62f3cae8
Adding RefBuffer to simplify reference buffer management. The struct has a
pointer to image data and scale factors relative to the current frame.
Change-Id: If38eb1491ff687cc11428aee339f3e052e2c5d9e
Moving back to scale_factors struct. We don't need anymore x_offset_q4 and
y_offset_q4 because both values are calculated locally inside vp9_scale_mv
function.
Change-Id: I78a2122ba253c428a14558bda0e78ece738d2b5b
Before mv scaling it is required to calculate x_offset_q4/y_offset_q4
by calling set_scaled_offsets(). Now offset configuration can not be
missed because it happens just before scale_mv().
Change-Id: I7dd1a85b85811a6cc67c46c9b01e6ccbbb06ce3a
Using get_plane_block_size() instead of manipulation with subsampling
values, calculating all required values only once without redundant calls
to b_width_log2().
Change-Id: I00303f2a0926f9c4cb17f34591adda60615f8919
The decoder will construct inter predictor using lazy border extension,
while the encoder, going with multiple runs of motion search in the rate-
distortion optimization loop for each block, does border extension at
frame level. This commit makes separate the inter predictors for encoder
and decoder, respectively.
Change-Id: Ieca2fecba3a7201a6d64ef9f219e5d91e50559c3
This commit takes out vp9_extend_frame_borders from
vp9_setup_scale_factors.
The refactoring is for the preparation of the use of lazy border
extension at decoder. This makes it necessary to handle border
extension separately at encoder/decoder. The use of
vp9_extend_frame_borders will be removed, when lazy border extension
is ready.
Change-Id: Ia3baba3d179d5f11eee1634f19b3b319d2a59186
