This commit added a speed feature to make the logic of calculating
skip_recode on a block level more explicit. This also enable the
feature to be enabled at speed 5 where the previous logic is too
conservative, help gain back the lost speed for --rt(-5).
Change-Id: Ieb37ca3e85c2e7bda343486edf13d5f5395f2233
There were a few conflicts between the new non-RD partition search
and recent clean-up patches, which were not caught by git control.
This commit fixed these issues.
Change-Id: Ieebefbd6c19d81d0d13e3c568877d5cce2ab7797
This commit takes out the if statements on using adaptive motion
search flag. This feature is automatically enabled in non-RD mode
decision flow for variable partition types search.
Change-Id: I5a25cf9109d84d07aa61b3e02c8d32dda1e90cb0
This commit enables a recursive partition type search for non-RD
mode decisions. It allows the encoder to choose variable block
sizes in a 64x64 block based on rate-distortion modeling.
It improves speed -6 coding efficiency for rtc set by 2.4%. Most
of the gains come from 32-40dB range, where many sequences gain
about 5% to 20%. Local tests suggest there is no speed change.
Change-Id: I06300016e500a21652812b7b3b081db39a783d66
This commit reformats non-RD coding flow layout to allow mode
decision with fixed and variable block sizes.
Change-Id: I2cdd3bb9f26c499ee4a9849004fd925cdd195d09
The flag x->skip_recode interacts badly with
the cpi->sf.use_nonrd_pick_mode and
cpi->sf.skip_encode_sb speed settings.
Restricting the use of the skip_decode flag when
these other speed choices are in use helps quality
for speeds 3 and 4 by a large amount with only a
small impact on speed.
Average improvmentes for 2 pass speed 4:
Derf +8.8%
Yt + 10.53%
Std-Hd +6.95%
yt-hd + 22.95%
Change-Id: I8010876d8012042a11077c92e69d813c3dfa58eb
This is an initial attempt to allow variable block size partition
in non-RD coding flow. It tests 8x8, 16x16 and 32x32 block size per
64x64 block, all using non-RD mode decision and the associated rate
distortion costs from modeling, then selects the best block size to
encode the entire 64x64 block. Such operations are triggered every
other 3 frames. The blocks of intermediate frames will reuse the
collocated block's partition type.
It improves the compression performance by 13.2%. Note that the gains
are not evenly distributed. For many hard clips, the compression
performance is improved by 20% to 28%. Local speed test shows that
it will also increase runtime by 50%, as compared to speed -7. It is
now enabled in speed -6 setting.
Change-Id: Ib4fb8659d21621c9075b3c369ddaa9ecb0a4b204
The use of uninitialized skip flag will trigger inconsistency in
coding statistics, when alternate RD and non-RD coding modes are
enabled. This commit fixes this issue and removes unnecessary if
statements from update_state_rt.
Change-Id: I7d549dcb0e3ef48b999e5bbc78174ba84502cfcf
The block coding skip flags are assigned in the normal RD mode
decision loop. They are then used in the final encoding stage.
In the non-RD mode decision, the forward transform and quantization
stages are replaced by modeling based on SSE and variance of
prediction residues. This commit applies reset to this array in
the non-RD coding mode.
Change-Id: I66584669b035e9c8ac23e95047849ff277472742
This commit moves the position where rdmult is saved to make sure it
is the correct value. Prior, an uninitialized value may be saved and
restored.
This addresses issue:
https://code.google.com/p/webm/issues/detail?id=733
Change-Id: I436407f289169bc63da3c5a6bf609bed16cb71b5
This commit unifies the non-RD partition use cases for both fixed
and variable block sizes. Deprecate and remove the separate function
for fixed partition type only.
Change-Id: I2b6cb945e90c1566f985adcebc4d0757480a8004
Brings back most of Jim's previous patch for choosing
partitioning based on variance while making it compatible
with the current state of the code. Also adds a
nonrd_use_partition() function to recursively encode for any
arbitrary sb_type decisions within a 64x64 block; and
includes some refactoring.
Currently, when the VAR_BASED_PARTITIONING mode is turned on
for speed 7, there is a 10+% speed-up observed.
Experiments/improvements with this new partitioning method
will be conducted subsequently.
Change-Id: Ie6f43bfbde30583e941f450bf07c3b48828c9571
Clean-ups include
a. redundant code in rt -5 speed feature settings
b. code that guarantees square block availability in
rd_auto_partition_range()
Change-Id: Ic7b04d45b6dc15c461e0edbbb4e78aec20348291
This commit replaces SAD cost with modeled rate-distortion cost
for non-RD mode decision. It translates the prediction residual
SSE into estimate rate and reconstruction distorion costs, hence
capturing the quantization setting effect. The compression
performance of speed -7 for rtc set is improved by 14.79%.
Change-Id: Ifda014eb0501d13109fe7f92680bf1410b463632
Set speed features before running frame encoding. This avoids
redundant RD threshold calculation in key frame coding.
Change-Id: If8e3cf2c02976baa59b310c1c23af9eea0c46e36
Adds a speed 8 to VP9 where only the nearestmv (0 mv) is searched.
This seems to be about the same speed as vp8 speed 5.
Adds a new speed feature to disable inter modes based on a mask for
each blocksize.
Adds code for having lower complexity motion search methods
in nonrd pick mode function, even though speed 7 still uses DIAMOND
search for now.
Also uses HEX search for speed 6 rather than FAST_HEX which improves
psnr by 0.56% without any noticeable speed drop (tested on gipsmotion).
Change-Id: Ic13176572dbd3aed5884a26786940a4b1bbd8a75
For blocks at frame boundary, the selected block size sometimes needs
to be smaller than that was first given. This commit forces such block
size change only between square blocks, so as to avoid the potential
use case containing 32x16 + 16x8 + 16x8, for 1080p sequences.
Local test suggested no visible coding speed difference. Borg test
reveals no difference in terms of compression performance.
Change-Id: Ie8de87f3c6febc3acf11b4cbfdf2077f9f6def52
Instead of using source variance, this patch uses variance of the
frame difference between the source and the current frame to make
fixed size partition decisions. Also disables adjusting partitioning
if variance based or fixed size partitioning is used.
The latter change improves the speed substantially for speed 6, so
that speed 7 is now less than 3x the speed of speed 6. But speed
6 is 48% better in psnr on the rtc set compared to speed 7.
As compared to speed 5,
speed 6 is -37% in psnr at about 2.5x the speed,
speed 7 is -55% in psnr at about 7x the speed.
Change-Id: If61d80431d3e04ed304ac05832e773cdb2c0a578
Adds a method for determining a fixed size partition based on
variance of a 64x64 SB. This method is added to rtc speed 6.
Also fixes a bug in rtc_use_partition() and includes some
refactoring related to partitioning search, and some cosmetics.
Currently compared to speed 5, the coding efficiency of speed 6
is -19% and that of speed 7 is -55%, in cbr mode.
Change-Id: I057e04125a8b765906bb7d4bf7a36d1e575de7c6
The optimizer did something funny with the code around
line 1412. Before the call to encode_sb split_dist was
set properly but after it was adjusted and converted to
a negative.
https://code.google.com/p/webm/issues/detail?id=714
Change-Id: I9a7631d5325ade2dc28c1030653a23eecec8721b
If sf->disable_split_mask is DISABLE_ALL_SPLIT, disable
sf->adaptive_pred_interp_filter to avoid unnecessary operations.
Change-Id: Icb59174b2f4e9a3c3c16a696deb8018e5bd999eb
Moves the existing speed 6 to speed 7 and adds an
intermediate level 6 which is roughly in between
speeds 6 and 7 in both speed and coding efficiency.
Also includes some minor fixes/adjustments.
Change-Id: I98befc4d82d750e79fe426c457c4a2571f6b6cc7
This commit makes a refactoring of the rtc_use_partition. It allows
the encoder to take a preferred block size for non-RD mode decision.
The boundary blocks are handled such that smaller block sizes that
fit in the boundary size will be used instread.
In rtc mode, the coding performance of speed -6 for pedestrian_1080p
goes from
158980 b/f, 38.934 dB, 22721 ms to
159008 b/f, 40.064 dB, 23721 ms.
For rtc set, the speed -6 compression performance is improved by
26%. Still about 2dB behind speed -5 at this point.
Change-Id: If0944f0880eaf1ad340bc325d97cea8d0f9dd53f
In the first coding run of a 64x64 block, check the coding mode
for each 8x8 block. Will need a second annealing stage to decide
the partition size to be encoded.
Change-Id: Ida9417805ff3358979b0c0429d4099c023c88866
Run sub-pixel motion search when NEWMV gives lower rate-distortion
cost. This improves coding performance of derf set by 8%, std-hd by
2.2%.
Change-Id: Ife50f7fda8463927784fe59a41cc439c833e941a
Prior to this commit, both encoder and decoder reset mode/mv info from
previous frame in error resilient mode to ensure bitstreams are able to
decode when there is loss of frame in decoder side. However, this is
not necessary. This commit changed to remove the reset, so encoder can
continue to use mode/mv/partition information from previously encoded
frame without affecting decodeablilty under loss of frame.
Change-Id: I0279f862900dc647fb471ae3389770bb1b9f454f
In rtc coding mode, the encoder is running non-RD mode decision. It
does not need dual buffer swap as was the case in the RD mode. This
commit initializes the internal buffer pointers outside the block
coding loop for rtc mode.
Change-Id: Ie076705c60d6b7919217e3f1dfd49e7db5064ac2
The functionalities of set_offsets() are subsumed in later
set_partitioning() and rtc_use_partition() functions, hence removed.
Change-Id: Ie514b13cb66c2379f13d0be9b1da4c12ca4581e5
This function initializes the predictor buffer pointers and
calculates reference motion vectors. It is only needed in the settings
of inter frame coding. Hence removing it from the key frame coding
branch in rtc_use_partition.
Change-Id: Ic4e16c7467a5f32be4e0bf619ef9d57afb4a7075
This function is deprecated after the re-design of partition search
that runs big block size, then four-way split, followed by
rectangular block sizes. This commit removes the related functions.
Change-Id: I417549c8e0fa3cf35bd29816b805dd4e7c3660c6
The function rd_pick_reference_frame can be deprecated. Its use was
subsumed by the adaptive motion search control.
Change-Id: Icb0c2fa335f0f06fa7b79a71f972d9fa54d750db
In real time encoding, we enable encode_breakout to make encoding
fast. A speed feature "use_encode_breakout" is defined to set
encode_breakout thresholds for different speeds.
However, currently, static_thresh is an encoder option. The encode_
breakout can be turned off if user sets static_thresh=0 specifically.
The rtc set borg test result: (need to set --static_thresh=1)
speed -5, psnr loss -3.543%;
speed -4, psnr loss -2.358%;
speed -3, psnr loss -0.771%.
Encoding speed test:
speed -5, 11% - 60% speedup;
speed -4, 5.5% - 28% speedup;
speed -3, 0.8% - 7% speedup.
Change-Id: Icde592ffbe77eac7446f872a2e9eb2051733677b
Aq 1 only updates segment map on kf and arf and
only uses 3 segments. With these settings AQ1 is
+ for most clips in SSIM but negative in psnr.
However, the penalty in PSNR is much less than
previously.
Old version aq1 average results for std hd
-20.899% psnr, -5.809% SSIM
New version aq1 for std hd
-3.57% psnr, +1.23% SSIM
Aq2 Now uses only 2 segments and rd.
This mode is still slightly negative for most clips on
psnr and SSIM but seems to have a much bigger visual
impact on several problem clips than aq mode 1.
Old results for std hd:
-2.578% psnr, -1.151% SSIM
New results for std hd:
-1.561% psnr, -0.85% SSIM
Change-Id: I94f57f8a73121629ce598fb921aad761c1450e1c
Function encode_rtc_frame_internal() and encode_frame_internal() only
differed by a couple of speed features, this commit relocation those
difference into the setup of speed features and merged two functions
into one to remove duplication.
It also fixed a subtle bug super_fast_rtc was used before it was
initialized.
Change-Id: I234a5a1d11a4450930e5b4943dbab434208d5030
This commit added a logic to prevent the inter_filter type from being
changed if the default interp_filter mode is not switchable. Also, it
sets the default interp_filter to BILINEAR at very and super fast rtc
encoding modes
Change-Id: Ic41e6d31de29795a4ce536ec79afb01cab6daad3
--rt --cpu-used=-5 uses the progressive rtc mode
--rt --cpu-used=-6 uses the new super fast rtc mode
Change-Id: Id6469ca996100cdf794a0e42d76430161f22f976
In this new mode, the size range is strictly determined by the min
and max partition size in neighborhood blocks.
Niklas720 encoding time at cpu-used -5 goes from 56250ms to 50676ms,
a 10% reduction.
Change-Id: I316b0e2ac967ff3fad57b28d69c0ec80b7d8b34e
This patch only works if the video is a width and height that are both
a multiple of 32.. It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame. It always does
does the largest possible transform, and loop filter level is set to 4.
Was ~20% faster than speed -5 of vp8
Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv
The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.
Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7
This commit deprecates the use of best_mv from encoding and bit-stream
writing stages. It hence removes the definition from MACROBLOCKD.
Change-Id: I8e5302775a2aa4a18900726df407bff881f2dfb1
This commit setups a test framework for real-time coding. It enables
a light motion search for non-RD mode decision purpose.
Change-Id: I8bec656331539e963c2b685a70e43e0ae32a6e9d
Calculate the skip_coeff as part of the encode process, rather than
checking the eobs after the fact with another pass.
Change-Id: Ib41b139e96a97dee30e4b993b4cc53d86337128d
This commit allows encoder to compare the SAD cost associated with
the best motion vector predictor, per frame. If one reference frame
has this cost more than 4 times of the best SAD cost given by other
reference frames, skip NEARESTMV, NEARMV, ZEROMV mode check of this
reference frame.
This setting is turned on in speed 2 and above. Compression quality
change in speed 2:
derf -0.014%
yt -0.097%
hd -0.023%
stdhd 0.046%
It reduces the speed 2 runtime of test sequences:
pedestrian_area_1080p 4000 kbps 310763 ms -> 303595 ms
bluesky_1080p 6000 kbps 259852 ms -> 251920 ms
Change-Id: I7f59cf79503d51836d61d56d50dc5bdf0e502e22
Adding RefBuffer to simplify reference buffer management. The struct has a
pointer to image data and scale factors relative to the current frame.
Change-Id: If38eb1491ff687cc11428aee339f3e052e2c5d9e
Moving back to scale_factors struct. We don't need anymore x_offset_q4 and
y_offset_q4 because both values are calculated locally inside vp9_scale_mv
function.
Change-Id: I78a2122ba253c428a14558bda0e78ece738d2b5b
Various cleanups and refactoring.
Removes feedback of active worst qaulity and uses last_q
instead to make the interface cleaner. Active worst quality
is now decided only once for a frame being coded in the
beginning based on last_q and other stats. Also, adds other
cleaups on last_q to store also the last_q for altref frames,
and reduces the altref interval a little.
The output does change a little.
derfraw300: +0.224% (global psnr)
stdhdraw250: +0.442% (global psnr)
Change-Id: Ie634cdc032697044c472dd0fe79c109b3e7f9767
This commit enables an adaptive prediction filter type selection
for sub8x8 block sizes. In speed 1, it re-uses the filter type of
collocated 8x8 block if it is tested in the rate-distortion optimization
loop, for the sub8x8 blocks. Otherwise, it runs the normal test
over all the three filter types. In speed 2, it re-uses the 8x8
block's prediction filter type, if available. Otherwise, force it
to be EIGHTTAP.
Compression and speed performance wise:
speed 1
derf -0.266%
yt -0.138%
bus at 2000 kbps: 33766ms -> 30451ms (10% speed-up)
football at 600 kbps: 48173ms -> 43786ms (9% speed-up)
speed 2
derf -0.026%
yt +0.134%
bus at 2000 kbps: 18973ms -> 17698ms (6% speed-up)
football at 600 kbps: 26748ms -> 25096ms (6% speed-up)
Change-Id: I77e097533b969fd3472147225fa79fc98095d342
Trying to make encode_sb() more similar to write_modes_sb() and
decode_mode_sb() because essentially all branching logic should be the
same.
Change-Id: Ib7dec7b48fce29418142abad4d1dcfdb1c770735
In evaluating partition split case, Wrong partition size is used in
calling partition_plane_context(). This commit change to use the
correct sub partition size. The incorrect partition size used were
causing an ASAN error in unit test.
Change-Id: Iab695b764bc51cc61580075f2ae4001421132362
In lossless coding, distortion is always 0. Early exit based on this
metric was incorrect.
This CL also changed to use best_rd instead of distortion as the metric
for easly exit as requested by Jim.
Change-Id: I8ef3e407ac03b4abc3283b273f936a68fad5c2ab
In the decoder we don't need to save eobs, we can pass eob as an argument.
That's why removing eob arrays from VP9Decompressor and TileWorkerData,
and moving eob pointer from macroblockd_plane to macroblock_plane.
Change-Id: I8eb919acc837acfb3abdd8319af63d1bbca8217a
E.g. disable vertical partioning for 4:2:2. Until we come up with something
better to do with the chroma block size, this prevents an assert error.
Change-Id: I9394fb3f14ec1343abc3ad4769de208e6278f285
We only need qcoeff buffers in the encoder. Reducing TileWorkerData struct
and VP9Decompressor struct sizes by 24K.
Change-Id: Id148868461f7ffa3d3dd634b371503ae9c57e207
The idea here is to allow "in frame" adjustment of the final Q
value used to encode each SB64, using segmentation.
There is also adjustment of the rd mult in regions of overspend.
Activated using aq_mode=2
Change-Id: I2f140cd898c9f877c32cd6d2e667f5e11ada4b1c
This function is called from vp9_setup_past_independence() which is called
before the modified piece of code. Moving reset of inter_mode_probs into
vp9_init_mbmode_probs() for consistency.
Change-Id: Ib188e8798e1fbe15407fd501406761b746fdda95
Since they used in encoder only. This commit also re-order includes
for the files that include vp9_extend.h
Change-Id: I929fc113f2135d3198cd1fc6a17434e5a2f8a459
Overall change (using dual buffer scheme for superblocks of both inter
and intra modes) reduces speed 2 runtime:
bluesky_1080p at 6000kbps: 263553ms -> 257441ms
riverbed_1080p at 8000kbps: 233230ms -> 225308ms.
Change-Id: Idf8d70f768a4b0d97b2a8506372c57b7b4022119
This commit enables the dual buffer rate-distortion optimization
and encoding scheme. It stacks the original transform coefficients,
quantized levels, and reconstructed coefficients, in the rate-
distortion optimization search process, hence eliminates the need
to re-run residual generation, forward transform, and quantization
in the encoding stage.
Change-Id: I011bfad3a59a380a869ee552e91dae0394ec492e
Allocate memory space of dual buffer sets that store the coeff, qcoeff,
dqcoeff, and eobs. Connect the pointers of macroblock_plane and
macroblockd_plane to the actual buffer in use accordingly.
Change-Id: I2f0b5f482ca879fae39095013eaf8901db20a5a4
Removed three members from the VP9_COMP data structure:
inter_zz_count, gf_bad_count, gf_update_recommended.
These were part of the VP8 real-time mode implementation
that was removed from the initial VP9 codecbase.
Change-Id: I866b083b88ef02c74837277d50ce532ca88492f3
replaces use of cur_tile_mi_(row|col)_(start|end) by VP9_COMMON, making
it less stateful and more reusable for parallel tile decoding
Change-Id: I1df09382b4567a0e5f4434825d47c79afe2399be
update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding
Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed
For consistency with idct function names. Renames:
vp9_short_fdct4x4 -> vp9_fdct4x4
vp9_short_walsh4x4 -> vp9_fwht4x4
Change-Id: Id15497cc1270acca626447d846f0ce9199770f58
