Adds modeled functions to decide the qp for altref frames in constant q
mode similar to other functions in use in bitrate mode.
Also turns on the constrained quality mode (end-usage=2) option which
was turned off before. Basic testing shows the mode works in principle,
to cap bitrate to the target-bitrate specified, while allowing lower
bitrate depending on the cq-level specified. The mode will need to be
improved over time.
Results for constant quality vs bitrate control mode:
derfraw300/fullderfraw: +3.0% at constant quality over bitrate control.
fullstdhdraw: +4.341%
stdhdraw250: +5.361%
Change-Id: If5027c9ec66c8e88d33e47062c6cb84a07b1cda9
This commit makes the rate-distortion optimization loop evaluate
the rd costs of regular quantization and all zero coeffs, per
transformed block. It improves speed 1 compression performance:
derf: 0.245%
yt: 0.515%
For a large partition that consists multiple transformed blocks,
this allows more flexibility to selectively force a portion of
them coded as all zero coeffs, as well be continued in the next
patches.
Change-Id: I211518be4179747b57375696f017d1160cc91851
The sub8x8 blocks has its own motion vector reference scheme. The
mv_pred is only used blocks of sizes 8x8 and above, to find the
starting point for motion search.
This change does not change any coding behavior. It makes the
encoding process slightly faster. (0.5% speed-up for local test on
speed 1.)
Change-Id: I746ee6ef0eac19aa3621be014afa12be8d82cbb9
The fake token EOSB may cause invaild memory read in pack token, this
commit reworked the loop to avoid such invalid read.
Change-Id: I37fdfce869b44a7f90003f82a02f84c45472a457
This commit cleans up the second reference check in the
rate-distortion optimization loop of sub8x8 blocks.
Change-Id: Ife68feaa4cddbfad2878c9b44d3012788d634f97
The commit added reset of pred_mv at the beginning of each SB64x64
partition mv search, also limited the usage of pred_mv only when
search on the largest partition is already done. This is to fix
a crash at speed 1/2 encoder where an invalid mv is used in mv
search.
Change-Id: I39010177da76d054e3c90b7899a44feb2e3a5b1b
This commit enables adaptive constraint on motion search range for
smaller partitions, given the motion vectors of collocated larger
partition as a candidate initial search point.
It makes speed 0 runtime of bus at CIF and 2000 kbps goes from
167s down to 162s (3% speed-up), at 0.01dB performance gains. In
the settings of speed 1, this makes the runtime goes from 33687 ms
to 32142 ms (4.5% speed-up), at 0.03dB performance gains.
Compression performance wise, it gains at speed 1:
derf 0.118%
yt 0.237%
hd 0.203%
stdhd 0.438%
Change-Id: Ic8b34c67810d9504a9579bef2825d3fa54b69454
Mis-merge of the following change managed to break mode order
and delete two mode options (new alt ref and near alt ref)
It also created a situation where we could test two undefined
modes off the end of the VP9_mode_order[] data structure.
"clang warnings : remove split and i4x4_pred fake modes"
"Change Id: I8ef3c*"
Initial testing on Akiyo at speed 2.
101.35 44.567 44.447 improves to
96.82 44.915 44.815
Approx 0.3-0.4db gain and 2.5% size reduction
Change-Id: Icff813e7c0778d140ad4f0eea18cf1ed203c4e34
Removes this speed feature since it is very slow and unlikely
to be used in practice. This cleanup removes a bunch of unnecessary
complications in the outer encode loop.
Change-Id: I3c66ef1ca924fbfad7dadff297c9e7f652d308a1
Propose some changes to the speed 2 settings to improve quality.
In particular, turns off the adjust_thresholds_by_speed feature
which improves results by 6%. Also removes the code for
adjust_thresholds_by_speed since it conflicts with the adaptive
rd thresh feature.
Overall, with this change speed 2 is -15.2% from speed 0 settings,
on derf, which is significantly better than -21.6% down before.
Change-Id: I6e90a563470979eb0c258ec32d6183ed7ce9a505
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs. The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.
Change-Id: I031d376284c6eb98a38ad5595b797f048a6cfc0d
The c code implementation of 32x32 quantization does the zbin check
of all coefficients prior to the quant/dequant loop, hence removing
the redundant zbin check inside the loop. This only affects the
c code version. SSSE3 version does not separate the zbin check out.
Change-Id: Ic197a7d61d0b25fcac3cc092987651378cb56e4e
If the current obtained distortion is very small, which happens
for static image case, we pick the current partition type without
further split checking.
This won't affect regular videos. For static videos, we got 10%~12%
encoding speed gain. PSNR was better for some clips, and worse for
others. Overall it was even.
Change-Id: If787a57bedf46fc595ca4f5ded2b0c0a69e9fdef
Thank Paul for the suggestions. While turning on static-thresh
for static-image videos, a big jump on bitrate was seen. In this
patch, we detected static frames in the video using first-pass
stats. For different cases, disable encode breakout or reduce
encode breakout threshold to limit the skipping.
More modification need be done to break incorrect partition
picking pattern for static frames while skipping happens.
Change-Id: Ia25f47041af0f04e229c70a0185e12b0ffa6047f
A previous speed feature skipped modes not used in earlier
partitions but this not longer worked as intended following
changes to the partition coding order and in conjunction
with some other speed features (Especially speed 2 and above).
This modified mode skip feature sets a mask after the first X
modes have been tested in each partition depending on the
reference frame of the current best case.
This patch also makes some changes to the order modes are
tested to fit better with this skip functionality.
Initial testing suggests speed and rd hit count improvements
of up to 20% at speed 1. Quality results. (derf -1.9%, std hd +0.23%).
Change-Id: Idd8efa656cbc0c28f06d09690984c1f18b1115e1
Sample app: vp9_spatial_scalable_encoder
vpx_codec_control extensions:
VP9E_SET_SVC
VP9E_SET_WIDTH, VP9E_SET_HEIGHT, VP9E_SET_LAYER
VP9E_SET_MIN_Q, VP9E_SET_MAX_Q
expanded buffer size for vp9_convolve
modified setting of initial width in vp9_onyx_if.c so that layer size
can be set prior to initial encode
Default number of layers set to 3 (VPX_SS_DEFAULT_LAYERS)
Number of layers set explicitly in vpx_codec_enc_cfg.ss_number_layers
Change-Id: I2c7a6fe6d665113671337032f7ad032430ac4197
