For now the interface elements have been left in place
to make sure existing parameter files work but parameters
relating to drop frame wont do anything.
Change-Id: I579ee614726387381c546845dac4bc03c74c6a07
* Removes EDGE_PIXEL_FILTER for external sanpshot
* changes the default 8-tap filter based on high precision results
in http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
* changes the default prob tables for high-precision mv encoding to
favor zeros in the last bit (i.e. quarter pel). This is only important
for short clips.
Change-Id: I02bb0de8679d9eec06cdbcc8160dbf073cd847a4
This is the initial patch for supporting 1/8th pel
motion. Currently if we configure with enable-high-precision-mv,
all motion vectors would default to 1/8 pel. Encode and
decode syncs fine with the current code. In the next phase
the code will be refactored so that we can choose the 1/8
pel mode adaptively at a frame/segment/mb level.
Derf results:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html
(about 0.83% better than 8-tap interpoaltion)
Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V
Patch 4: HD results.
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html
Seems impressive (unless I am doing something wrong).
Patch 5: Added mmx/sse for bilateral filtering, as well as enforced
use of c-versions of subpel filters with 8-taps and 1/16th pel;
Also redesigned the 8-tap filters to reduce the cut-off in order to
introduce a denoising effect. There is a new configure option
sixteenth-subpel-uv which will use 1/16 th pel interpolation for
uv, if the motion vectors have 1/8 pel accuracy.
With the fixes the results are promising on the derf set. The enhanced
interpolation option with 8-taps alone gives 3% improvement over thei
derf set:
http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
Results on high precision mv and on the hd set are to follow.
Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in
vp8/common/x86/x86_systemdependent.c
Patch 7: Cleaning up various debug messages.
Patch 8: Merge conflict
Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
Yunqing fixed an oddity in UVIntra skippable evaluation for stable
branch, which brought up the fact that the evaluation is broken.
The issue was that for MBs with 2nd order block, the eob for 1st
order blocks is set at 1. The previous evaluation did not take that
into account. This commit intend to fix the problem. The commit also
absorbed Yunqing's fix for UVIntra skippable evalution.
Test on hd showed some good gains in combination with LPF bias fix:
http://www.corp.google.com/~yaowu/no_crawl/LPFBias_FixSkip.html
(avg psnr: .34%, glb psnr: .32%, ssim: .22%)
Change-Id: I36af11c8ef7f643e8ff46da7bf3a167b437039d4
The bias in picklpf intended to bias toward less greedy in getting
best frame level psnr while maximize overall quality for a clip.
This commit reduced the bias for frames using 8x8 transform to
achieve better compression overall.
The change improve compression by ~.15% consistently on most of the
HD clips tested.
http://www.corp.google.com/~yaowu/no_crawl/LPFBias_FixSkip.html
Change-Id: Ic30932d2b8eaebd52339b0195f569edc48eed7bc
The commit rationized and simplified the entropy context conversion
betwen MB using 8x8 transform and MB using 4x4 transform. The old version
had a number of weirdness in how 4x4 transform MB's context is used for
8x8 blocks other than the first 8x8 within a MB.
Test showed the change has a gain ~.1% for avg psnr, glb psnr and ssim on
the limited HD set.
Change-Id: I774536c416baa6845aa741f956d8a69fa40e5d47
Removal of the pickinter.c and .h files and calls to this
code.
Removal of some code relating to real time and one pass
settings though there is more to be done in this regard.
However, vp8_set_speed_features() now
only supports modes 0 and 1 and speeds up to 3
so rd should always be set.
Change-Id: I62c0c1b6154ab499785baef310536080e87bc4d8
this commit changed the UV r/d calculation in the mode decision process to
properly account for the rate of 8x8 transform coefficients.
Change-Id: I485f8f35f2b61db0b6539beb32e83481b1cf083b
the changes are still temporary, the final transforms, especially
inverse ones should take in account both accuracy, complexity, and
sign-bias, which should be decided at a later time.
Change-Id: I116b0c70b25f5ee324ae5713d4564f5d0aa27151
During the work of extend_qrange, we have rolled a factor of 2 from
quantization/dequatnization into 2nd order walsh-hadamard transform.
This commit does the same for the 2nd order haar transform. so they
can share the same quantizaiton process as the 2nd order WHT.
Change-Id: I734af4a20ea8149a01b5b1971a065092977dfe33
Previously, the scaling related to extended quantize range happens in
dequantization stage, which implies the coefficients form forward
transform are in different scale(4x) from dequantization coefficients
This worked fine when there was not distortion computation done based
on 8x8 transform, but it completely wracked the distortion estimation
based on transform coefficients and dequantized transform coefficients
introduced in commit f64725a00 for macroblocks using 8x8 transform.
This commit fixed the issue by moving the scaling into the stage of
inverse 8x8 transform.
TODO: Test&Verify the transform/quantization pipeline accuracy.
Change-Id: Iff77b36a965c2a6b247e59b9c59df93eba5d60e2
I'm basically not convinced that the concept works at all, let alone
that this is the right place to do it. I think if we want something
like this at all, I should integrate it with the main encoding loop
and re-encode checks in onyx_if.c, and show that it has a significant
benefit (which right now, it doesn't; removing this re-encode check
actually increases all metrics by ~0.15%).
Change-Id: I1b597385dc17f468384a994484fb24813389411f
This commit moved segment based loop filter level selection into
the experiment of CONFIG_FEATUREUPDATES. As previous commit noted,
the segment based loop filter selection helps the compression by
~0.1% on cif set, the ongoing experiment CONFIG_FEATUREUPDATES
made encoding updates of the segment based LPF level more efficient,
hence, another .04% gain on cif set. The commit also fixed an issue
previously where encoder/decoder may use different loop filter level
for one of the segments.
Change-Id: Ia978b14aae95bb107d561ba53a7a2bb6ff01faf3
This commmit added logic for MB using dual-pred to compute rate
estimation based on correct transform size. The section of code
was previously located under #if CONFIG_DUALPRED, that was made
to be working with T8x8 experiment at the same time.
Change-Id: Iebc2518c03f11378b9c2e72905520f088b54d5c0
Added a bit to signify that the feature changed since
the last time we sent it, or not so that we don't need
to send all the databits for every feature change.
added config
Change-Id: I8d3064ce90d4500bf0d5c6b87c664e46138dfcac
Added a frame level flag to indicate if coef probabilities are updated
at all for the frame.
During the experimental work with 8x8 transform, it is discovered that
even in the case of no probability is ever update, cost of transmitting
"no update" for each of probabilities can run up to become a significant
overhead cost. A single bit to indicate no-update for all coef probs
is therefore helpful, which is also demonstrated by the test results:
1. On Cif set:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_updprob.html
(avg psnr: .14%, glb psnr: .14% SSIM: .13%)
2. On HD set:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_updprob.html
(avg psnr: .02% glb psnr: .01% SSIM: .02%)
It should be noted that the gain on HD is smaller because the average bit
rate is much higher in contrast to the overhead bit cost.
Change-Id: I46db270e693ee8799fef34a14d8260868ce4cd16
For 8x8 transformed macroblock, the 2nd order transform is a 2x2 haar
transform, here there is only 4 coefficients total. A previous merge
changed these to 64, causing crashes when encoding with 8x8 transform
enabled. (i.e. when input video image size > 640x360 ) This commit
reverts them back to 4 and fixes the crashes.
Change-Id: I3290b81f8c0d32c7efec03093a61ea57736c0550
For the experimental branch we are trying to slim the codebase
down removing features such as threading for now which complicate
the process of development and testing.
Change-Id: I657c0246aef4d1fa8c8ffc6a1adfeee45bce8e24
In summary, this commit encompasses a series of changes in attempt to
improve the 8x8 transform based coding to help overall compression
quality, please refer to the detailed commit history below for what
are the rationale underly the series of changes:
a. A frame level flag to indicate if 8x8 transform is used at all.
b. 8x8 transform is not used for key frames and small image size.
c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV
and I8X8_PRED are forced to using 4x4 transform based coding, the
rest uses 8x8 transform based coding.
d. Encoder and decoder has the same assumption on the relationship
between prediction modes and transform size, therefore no signaling
is encoded in bitstream.
e. Mode decision process now calculate the rate and distortion scores
using their respective transforms.
Overall test results:
1. HD set
http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html
(avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%)
2. Cif set:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html
(avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%)
It should be noted here, as 8x8 transform coding itself is disabled
for cif size clips, the 0.03% loss is purely from the 1 bit/frame
flag overhead on if 8x8 transform is used or not for the frame.
---patch history for future reference---
Patch 1:
this commit tries to select transform size based on macroblock
prediction mode. If the size of a prediction mode is 16x16, then
the macroblock is forced to use 8x8 transform. If the prediction
mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced
to use 4x4 transform. Tests on the following HD clips showed mixed
results: (all hd clips only used first 100 frames in the test)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.htmlhttp://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html
while the results are mixed and overall negative, it is interesting to
see 8x8 helped a few of the clips.
Patch 2:
this patch tries to hard-wire selection of transform size based on
prediction modes without using segmentation to signal the transform size.
encoder and decoder both takes the same assumption that all macroblocks
use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or
SPLITMV. Test results are as follows:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.htmlhttp://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html
Interestingly, by removing the overhead or coding the segmentation, the
results on this limited HD set have turn positive on average.
Patch 3:
this patch disabled the usage of 8x8 transform on key frames, and kept the
logic from patch 2 for inter frames only. test results on HD set turned
decidedly positive with 8x8 transform enabled on inter frame with 16x16
prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html
results on cif set still negative overall
Patch 4:
continued from last patch, but now in mode decision process, the rate and
distortion estimates are computed based on 8x8 transform results for MBs
with modes associated with 8x8 transform. This patch also fixed a problem
related to segment based eob coding when 8x8 transform is used. The patch
significantly improved the results on HD clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html
(avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%)
results on cif also improved, though they are still negative compared to
baseline that uses 4x4 transform only:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html
(avg psnr: -.78% glb psnr: -.86% ssim: -.19%)
Patch 5:
This patch does 3 things:
a. a bunch of decoder bug fixes, encodings and decodings were verified
to have matched recon buffer on a number of encodes on cif size mobile and
hd version of _pedestrian.
b. the patch further improved the rate distortion calculation of MBS that
use 8x8 transform. This provided some further gain on compression.
c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8
transformed macroblock, test results indicates it improves the cif set
but hurt the HD set slightly.
Tests results on HD clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html
(avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%)
Test results on cif clips:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html
(avg psnr: -.47% glb psnr: -.51% ssim: +.28%)
Patch 6:
Added a frame level flag to indicate if 8x8 transform is allowed at all.
temporarily the decision is based on frame size, can be optimized later
one. This get the cif results to basically unchanged, with one bit per
frame overhead on both cif and hd clips.
Patch 8:
Rebase and Merge to head by PGW.
Fixed some suspect 4s that look like hey should be 64s in regard
to segmented EOB. Perhaps #defines would be bette.
Bulit and tested without T8x8 enabled and produces unchanged
output.
Patch 9:
Corrected misalligned code/decode of "txfm_mode" bit.
Limited testing for correct encode and decode with
T8x8 configured on derf clips.
Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
Merged in most of the current common prediction changes
that were under the #if CONFIG_COMPRED option.
Change-Id: If4e6f61dbe7b86dd449f6effbe93b5eb7e893885
Further changes to make experiments with the context
used for coding the dual pred flag easier.
Current best performing method tested on derf is a two
element context based on reference frame. I also tried
various combinations of mode and reference frame as
shown in commented out case using up to 6 contexts.
Derf +0.26 overall psnr +0.15% ssim vs original method.
Change-Id: I64c21ddec0abbb27feaaeaa1da2e9f164ebaca03
Further use of common prediction functions and experiments
with alternate contexts based on mode and reference frame.
For the Derf set using reference frame as basis of context
gives +0.18% Overall Psnr and +0.08 SSIM
Change-Id: Ie7eb76f329f74c9c698614f01ece31de0b6bfc9e
We should only change the dual prediction mode if we actually entered
the recode branch. Else, it may potentially undo beneficial changes
to the dual prediction mode in the first encode iteration.
Change-Id: I79fc53e5fd0bb551092ed422c797619f1566f002
Some conditions were conditional under a threshold, whereas they should
always execute. Also, some conditions were testing an array instead of
the values within it.
Change-Id: Ia6892945cfbbe07322e6af6be42cd864bf9479c1
