The interintra experiment, which combines an inter prediction and an
inter prediction have been ported from the nextgen branch. The
experiment is merged into ext_inter, so there is no separate configure
option to enable it.
Change-Id: I0cc20cefd29e9b77ab7bbbb709abc11512320325
Don't initialize first pass costs for a number of symbols where first
pass probabilities aren't initialized.
As a side effect, an illegal read in the ANS experiment is fixed.
https://bugs.chromium.org/p/webm/issues/detail?id=1089
Change-Id: I97438c357bd88f52f5a15c697031cf0c3cc8f510
This commit unifies the motion vector cost buffers for full pixel
and sub-pixel motion search. The new motion vector coding system
provides 0.5% coding gains for 720p and above sequences and 0.2%
for lower resolution sets.
Change-Id: I927ec81eadc39d11a3c12b375221a1ddd2e8bf24
This commit accounts for the context based probability model for
motion vector cost estimate in rate-distortion optimization.
Change-Id: Ia068a9395dcb4ecc348f128b17b8d24734660b83
This commit converts the scalar motion vector probability model
into vector format for later precise estimate.
Change-Id: I7008d047ecc1b9577aa8442b4db2df312be869dc
In this experiment, an obmc inter prediction mode is enabled for
>= 8X8 inter blocks. When the obmc flag is on, the regular block-
based motion compensation will be refined by using predictors of
the above and left blocks.
Fixed some compatibility issues with vp9_highbitdepth, supertx,
ref_mv, and ext_interp.
Coding gain (%) on derflr/hevcmr/hevchd
OBMC:
1.047/1.022/0.708
OBMC + SUPERTX:
1.652/1.616/1.137
SUPERTX:
0.862/0.779/0.630
Change-Id: I5d8d3c4729c6d3ccb03ec7034563107893103b7f
Brings the following commits to vp10:
269428e Tie the bit cost scale to a define.
d13385c Switch to 9-bit rate cost constants built on a 256 probability denominator.
ad43a73 Fix a signed overflow in vp9 motion cost.
1c9b091 Fix some interger overflow errors
fac947d Restore previous motion search bit-error scale.
Change-Id: I598ba7ee7efcde18439c31dfa96b86cbf297a580
This commit enables entropy coding for dynamic reference motion
vector modes. The probability model is contexted on the ranking
categories of the reference motion vector candidates.
Change-Id: I09b58d98a409d63ec1a407331e29f8945b7ef17d
BD-rate performance improvement (on top of ext-intra):
derflr 0.22%
hevclr 0.36%
hevcmr 0.48%
hevchr 0.37%
stdhd 0.19%
Average speed impact on some derf clips is about 40% slower (on
top of ext-intra). Speed improvment is a to-do.
Change-Id: I8fe3fe8c5e4f60d0462778adbcc15c84dfbe7a25
Combinations of different mv modes for two reference frames
are allowed in compound inter modes. 9 options are enabled,
including NEAREST_NEARESTMV, NEAREST_NEARMV, NEAR_NEARESTMV,
NEAREST_NEWMV, NEW_NEARESTMV, NEAR_NEWMV, NEW_NEARMV, ZERO_ZEROMV,
and NEW_NEWMV.
This experiment is mostly deported from the nextgen branch.
It is made compatible with other experiments
Coding gain of EXT_INTER(derflr/hevcmr/hevchd): 0.533%/0.728%/0.639%
Change-Id: Id47e97284e6481b186870afbad33204b7a33dbb0
NEW2MV is enabled, representing a new motion vector predicted from
NEARMV. It is mostly ported from nextgen, where it was named
NEW_INTER.
A few fixes are done for sub8x8 RDO to correct some misused
mv references in the original patch.
A 'bug-fix' for encoding complexity is done, reducing the additional
encoding time from 50% to 20%. In sub8x8 case, the old patch
did motion search for every interpolation filter (vp9 only
searches once). This fix also slightly improves the coding gain.
This experiment has been made compatible with REF_MV and EXT_REFS.
Coding gain (derflr/hevcmr/hevchd): 0.267%/0.542%/0.257%
Change-Id: I9a94c5f292e7454492a877f65072e8aedba087d4
The nominal tx_type for a given mode is used as a context
to encode the actual tx_type for intra.
Results:
derflr: -0.241% BDRATE
hevcmr: -0.366% BDRATE
Change-Id: Icfe7b0a58d79bc6497a06e3441779afec6e01e21
This commit re-works the entropy coding scheme of the motion
compensated prediction modes. It allows more flexible hyperplane
partition for precise classification.
Change-Id: Iba5035c76691946cf1386b6c495e399c3d9c8fc5
Reduces the transform optons for INTRA as well as INTER when
transform size is 16x16 to not use any of the DSTs.
Thus, a total of 10 options are used for 16x16, while 4x4
and 8x8 still uses 17 options.
derflr/hevchd actually improves a little, while hevcmr drops
a little.
About 10% speed improvement.
Change-Id: I920a182231e052cdd622f8bb67085c16c572cb1e
Under the experiment of EXT_REFS: LAST2_FRAME, LAST3_FRAME, and
LAST4_FRAME.
Coding efficiency: derflr +1.601%; hevchr +1.895%
Speed: Encoder slowed down by ~75%
Change-Id: Ifeee5f049c2c1f7cb29bc897622ef88897082ecf
Adds a new interpolation experiment.
Improves entropy coding to send the filter type only if
the motion vectors have subpel components.
Adds one new 8-tap smooth filter, and tweaks the others.
derflr: +0.695%
hevcmr: +0.305%
About 5% encode slowdown. No visible impact for decoding.
Also makes the interpolation framework flexible to support both
strictly interpolating filters as well as non-interpolating
filters that filter integer offsets. This is mainly for
further experimentation and if not found useful the code will
be removed.
Change-Id: I8db9cde56ca916be771fe54a130d608bf10786e6
Allows inter and intra tx_types to have different sets of
transforms for different tx_size/sb_type combinations.
Change-Id: Ic0ac1daef7a9fb15c4210271e4d04cd36e5cec8e
This has various benefits:
- simplify implementations because we don't have to switch between
multiple probability tables depending on frametype
- allows fw subexp and bw adaptivity for partitions/uvmode in keyframes
See issue 1040 point 5.
Change-Id: Ia566aa2863252d130cee9deedcf123bb2a0d3765
Account for rounding in distortion calculation in k-means;
carry out rounding before duplicates removal of base colors;
replace numbers with macros;
use prefix increment.
Slight coding gain (<0.1%) on screen_content testset.
Change-Id: Ie8bd241266da6b82c7b2874befc3a0c72b4fcd8c
Add palette mode for keyframe luma channel. Palette mode is enabled
when using "--tune-content=screen" in encoding config parameters.
on screen_content testset: +6.89%
on derlr : +0.00%
Design doc (WIP):
https://goo.gl/lD4yJw
Change-Id: Ib368b216bfd3ea21c6c27436934ad87afdaa6f88
Does not include DST1 yet.
derflr: +1.437 (8-bit internal), +7.243 (12-bit internal)
with --enable-ext-tx
Change-Id: I91f1759fd2de794755eb6384cda52e80e979cb7d
In high bitdepth setting, the rate multipier may be set as 0. In
lossless mode, the RD cost would always be 0, resulting in bad
partition and prediction mode choices.
Change-Id: I297014dd8bfa8a07ff0ab480119f75678300ff68
