Simplifies the code by implementing band mapping with static arrays.
A lot of the code complexity introduced in a previous patch
disappears.
Change-Id: Ia3fac36e594fb5ad2d55ae141c58bba4c55c2d28
Overall change (using dual buffer scheme for superblocks of both inter
and intra modes) reduces speed 2 runtime:
bluesky_1080p at 6000kbps: 263553ms -> 257441ms
riverbed_1080p at 8000kbps: 233230ms -> 225308ms.
Change-Id: Idf8d70f768a4b0d97b2a8506372c57b7b4022119
Implements scan order to band map with arrays in both the encoder
and decoder to remove conditional statements.
Encoding seems to be about 1% faster at speed 0, tested on football.
Decoding seems to be about 0.5-1% faster on a set of 25 videos.
Change-Id: Idb233ca0b9e0efd790e30880642e8717e1c5c8dd
This commit enables the dual buffer rate-distortion optimization
and encoding scheme. It stacks the original transform coefficients,
quantized levels, and reconstructed coefficients, in the rate-
distortion optimization search process, hence eliminates the need
to re-run residual generation, forward transform, and quantization
in the encoding stage.
Change-Id: I011bfad3a59a380a869ee552e91dae0394ec492e
Allocate memory space of dual buffer sets that store the coeff, qcoeff,
dqcoeff, and eobs. Connect the pointers of macroblock_plane and
macroblockd_plane to the actual buffer in use accordingly.
Change-Id: I2f0b5f482ca879fae39095013eaf8901db20a5a4
The pointer was asigned only once with vp9_regular_quantize_b_4x4, calling
this function directly now. Also removing unused declarations:
prototype_quantize_block
prototype_quantize_block_pair
prototype_quantize_mb
vp9_regular_quantize_b_4x4_pair
vp9_regular_quantize_b_8x8
Change-Id: I14325bc2f082336820671eafbc06126651b79f73
Renames for consistency with other constants:
NUM_FRAME_TYPES -> FRAME_TYPES
NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS
Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f
This commit makes the buffer allocation of zcoeff_blk array in
pick_mode_context block size aware. It calculates the number of
4x4 blocks in the partition and assigns the memory space accordingly.
This process (and the uninitialization) is done once for each encoding
pass. It allows memory copy of smaller buffer when possible.
For football at 600kbps, the runtimes improve by about 1%:
speed 1, 45961ms -> 45472ms
speed 2, 23863ms -> 23598ms
Change-Id: Id2ca24906fa89f46fa5fe742ec4b8efc2a61f877
This should be similar to what x264 does with --aq-mode 1.
It works well with clips like parkjoy and touhou
(http://x264.nl/developers/Dark_Shikari/LosslessTouhou.mkv).
At low bitrates, the segmentation signaling overhead may negate the
benefits of this feature.
(PGW) Default changed to feature OFF to allow provisional merge.
Change-Id: I938abf9bb487e1d4ad3b0264ea03d9826275c70b
Use the zcoeff_blk buffer of PICK_MODE_CONTEXT to store the indexes
of all-zero-coeff block of the current best mode. Remove the temporary
buffer best_zcoeff_blk defined in the rate-distortion optimization
loop. This improves the speed performance by about 0.5% in all speed
settings.
Change-Id: Ie3e15988ddfa581eafa2e19a8228d3fe4a46095c
This commit moves token_cache buffer into macroblock struct, instead
of defining as a local variable in cost_coeffs. This avoids repeatedly
re-allocating memory space in the rate-distortion optimization loop.
The runtime at speed 0 reduces:
bus 2000kbps, 161692ms to 159951ms
football 600kbps, 229505ms to 225821ms
Change-Id: If7da6b0b6d8c5138a16271a33c4548fba33d8840
This commit re-designs the per transformed block rate-distortion
costs tracking buffers. It removes redundant buffer usage, makes
the needed context memory allocation per VP9_COMP instance and
reuses the same buffer sets inside the rate-distortion optimization
search loop, thereby avoiding repeatedly requiring memory space.
It reduces speed 0 runtime:
bus at 2000 kbps from 166763ms to 158967ms,
football at 600 kbps from 246614ms to 234257ms.
Both about 5% speed-up. Local tests suggest about 2% to 5% speed-up
for speed 1 and 2 settings. This does not change compression
performance.
Change-Id: I363514c5276b5cf9a38c7251088ffc6ab7f9a4c3
Use b_mode_info to store the inter prediction mode of sub8x8 block,
in replacement of the use of partition_info. Remove redundant buffer
update for partition_info. For bus_cif at 2000 kbps, this seem to make
speed 0 about 1% faster.
Change-Id: Id1b3be45e75a24fb4b42335ac480c23e440978f6
This commit enables forcing all coefficients zero per transformed
block, when its rate-distortion cost is lower than regular coeff
quantization.
The overall performance improvement (including its parent patch on
calculating rd cost per transformed block) at speed 1:
derf: 0.298%
yt: 0.452%
hd: 0.741%
stdhd: 0.006%
Change-Id: I66005fe0fd7af192c3eba32e02fd6d77952accb5
This commit enables adaptive constraint on motion search range for
smaller partitions, given the motion vectors of collocated larger
partition as a candidate initial search point.
It makes speed 0 runtime of bus at CIF and 2000 kbps goes from
167s down to 162s (3% speed-up), at 0.01dB performance gains. In
the settings of speed 1, this makes the runtime goes from 33687 ms
to 32142 ms (4.5% speed-up), at 0.03dB performance gains.
Compression performance wise, it gains at speed 1:
derf 0.118%
yt 0.237%
hd 0.203%
stdhd 0.438%
Change-Id: Ic8b34c67810d9504a9579bef2825d3fa54b69454
The low precision 32x32 fdct has all the intermediate steps within
16-bit depth, hence allowing faster SSE2 implementation, at the
expense of larger round-trip error. It was used in the rate-distortion
optimization search loop only.
Using the low precision version, in replace of the high precision one,
affects the compression performance by about 0.7% (derf, stdhd) at
speed 0. For speed 1, it makes derf set down by only 0.017%.
Change-Id: I4e7d18fac5bea5317b91c8e7dabae143bc6b5c8b
Adds a speed feature to skip all intra modes other than
DC_PRED if the source variance is small. This feature is
made part of speed 1 and up.
Results on derf300: psnr -0.07%, speedup about 1-2%
Also uses the source variance to fine-tune the early
termination criteria when FLAG_EARLY_TERMINATE is on.
This feature is made part of speed 2 and up.
Results on derf300: psnr -0.52%, speedup about 5-7%
Change-Id: I59e38aa836557cfa5405ae706fc64815cbfe4232
This allows us to increment the position at the band-level only as
we go from one band to the next; more importantly, that allows us to
use an add instead of multiply instruction, and omit the instruction
altogether if the band doesn't change from one coef to the next, thus
being slightly faster (probably more noticeable on systems where a
multiply is expensive, like arm).
Change-Id: I4343fe35b9f9a47fa00b217bdcbf5f91ff96c381
This patch modifies the auto_mv_step_size speed feature to
use a combination of the maximum magnitude mv from the last
inter frame, and the maximum magnitude mv for the two reference
mvs with the same reference. For arf frames, the max mav step
for the resolution is used.
The bounds therefore are slightly tighter. The feature is made
a speed 1 feature.
Rebased.
Results (when this feature is turned on over speed 0):
derfraw300: -0.046% psnr, about 5+% speedup
(tested on football: goes from 4m30.760s to 4m17.410s).
Change-Id: If492797a61b0b4b3e58c0b8f86afb880165fc9f6
Current partition checking starts from small sizes, and then goes up
to large sizes. This experiment uses the small partitions' motion
estimation result, which is already available, to speed up the
large partition's motion estimation. We can decide to skip some
patition checkings if they are unlikely choices. We could use the
motion vector(MV) result as current partition's prediction MV, limit
the search range and reference frame.
Current result at speed 1:
psnr loss: 1.19% for stdhd, 0.287% for derf.
speed gain: 14% for sunflower(hd), 11% for akiyo.
Further improvement will be done later.
Change-Id: I5abfd070e9cace2e91e2a0247d1325df313887ab
This speed feature allows the encoder to largely remove the spatial
dependency between blocks inside a 64x64 superblock, thereby removing
the need to repeatedly encode superblocks per partition type in the
rate-distortion optimization loop.
A major challenge lies in the intra modes tested in the rate-distortion
optimization loop. The subsequent blocks do not have access to the
reconstructed boundary pixels without the intermediate coding steps.
This was resolved by using the original pixels for intra prediction
in the rd loop, followed by an appropriately designed distortion
modeling on the quantization parameters. Experiments also suggested
that the performance impact is more discernible at lower bit-rate/psnr
settings. Hence a quantizer dependent threshold is applied to deactivate
skip of block coding.
For bus_cif at 2000 kbps,
speed 0: runtime 269854ms -> 237774ms (12% speed-up) at 0.05dB
performance loss.
speed 1: runtime 65312ms -> 61536ms, (7% speed-up) at 0.04dB
performance loss.
This operation is currently turned on in settings of speed 1.
Change-Id: Ib689741dfff8dd38365d8c1b92860a3e176f56ec
Changes cost_mv_ref() into doing a LUT into pre-calculated cost
arrays instead. Encode time of first 50 frames of bus (speed 0)
@ 1500kbps goes from 2min11.6 to 2min10.9, i.e. 0.5% faster overall.
Change-Id: If186e92c34c201b29cbbc058785a15c9c09e433a
Overall, on all test sets, this gains about +0.2% on all metrics.
City is a clip where this really hurts (-1.0% on all metrics), I'm
not quite sure why yet. Maybe interesting to look into in the future.
Change-Id: I6f0eecb20e72f0194633270d30bf00d76d9eae78
Total encoding time for first 50 frames of bus (speed 0) @ 1500kbps
goes 2min34.8 to 2min14.4, i.e. a 10.4% overall speedup. The code is
x86-64 only, it needs some minor modifications to be 32bit compatible,
because it uses 15 xmm registers, whereas 32bit only has 8.
Change-Id: I2df53770c2e850813ffa713e1a91b45b0082b904
Cycle timings for first 3 frames of bus (speed 0) at 1500kbps:
4x4: 298 -> 234 cycles
8x8: 1227 -> 878 cycles
16x16: 23426 -> 18134 cycles
32x32: 4906 -> 3664 cycles
Total encode time of first 50 frames of bus @ 1500kbps (speed 0) goes
from 3min0.7 to 2min51.6 seconds, i.e. 5.3% faster.
Change-Id: I68a0e1b530b0563b84a67342cca4b45146077e95
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.
This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.
Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3
