Adding these functions to encapsulate tx_type check. Changing TX_TYPE to
int to match the declaration in vo9_rtch.h.
Change-Id: I6f3a2df6e35595ca73b6aaa9e3909ee7bc3fd16f
Restructured the storing of loopfilter information. Deleted
loop_filter_info struct and reduced copying happened in every
superblock.
Tests showed a 0.5% ~ 0.8% decoder speed gain.
Change-Id: Ie6a8e46bae71dc3a3cd8c6054f5de540b8e0ef5e
update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding
Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed
When only upper-left 8x8 area has non-zero dct coefficients, we
could skip 1D IDCT for 9th to 32th rows to save operations. This
function is called when eob <= 34.
Change-Id: I9684b75947bdde346cfe3720f08a953aa7a13fb5
set_active_map()
set_roi_map()
The APIs need be implemented and tested later, to insure consistency
with VP9 codec internals
Change-Id: I198124ee318f0883b58d1d36cea3c7ccd742a57e
For consistency with idct function names. Renames:
vp9_short_fdct4x4 -> vp9_fdct4x4
vp9_short_walsh4x4 -> vp9_fwht4x4
Change-Id: Id15497cc1270acca626447d846f0ce9199770f58
Splitting setup_inter_inter function into is_compound_prediction_allowed
and setup_compound_prediction. Moving setup_compound_prediction call
into read_comp_pred from read_uncompressed_header.
We should do the same in the encoder as well.
Change-Id: I40d75fdc4a221b2f7705df00d23a4b3fe79987c3
The encode_block for pass 1 takes simpler functionalities and can
save a few branches. The main reason is to make encode_block only
used after running rate-distortion optimization search in pass 2,
hence allowing dual buffer stack approach later.
Change-Id: I9e549ffb758e554fe185e48a07d6e0e01e475bcf
Use a flag variable to determine if coded in inter mode, thus avoiding
multiple inter mode checks in super_block_yrd.
Change-Id: I0ef998b2811c38e185a2e0583f0f636cee45d2cf
Assign the pointer to mode_info stream per tile. Remove the use of
tile_col in the decoding modules.
Change-Id: I7df87086708a3d92c5e20e86bcfb04e458ff47a6
This move is done to have all compressed header reading functions in one
place. Moved functions:
read_switchable_interp_probs
read_inter_mode_probs
read_comp_pred_mode
read_comp_pred
update_mv
read_mv_probs
Change-Id: I2aebb57d2826d03d11bf2f8fbbfc3a9978c4f9fb
The ref's scale_factors are set at frame level, and then copied for
each partition block. Since the struct members are mostly constant,
this patch separated the constant and non-constant members, and
reduced struct copying. This gave 0.5% ~ 1.4% decoder speed gain.
Change-Id: I94043bf5a6995c8042da52e5c661818dfa6f6d4c
The pointer was asigned only once with vp9_regular_quantize_b_4x4, calling
this function directly now. Also removing unused declarations:
prototype_quantize_block
prototype_quantize_block_pair
prototype_quantize_mb
vp9_regular_quantize_b_4x4_pair
vp9_regular_quantize_b_8x8
Change-Id: I14325bc2f082336820671eafbc06126651b79f73
This commit uses left_available flag to decide if the left mode_info
struct is available for left_block_mode. As discussed with James
Zern (jzern@), this prevents the codec from fetching mode_info from
blocks in the left tile, which although effectively not used might
present concerns for multi-threaded tile decoding.
This is NOT a bit-stream change.
Change-Id: I1dc8cf1bcbf056688eee27c7bc5706ac4b4e0125
This reverts commit a82001b1cf, reversing
changes made to f6d870f7ae.
This commit breaks windows builds and needs some work to fix those and
some additional comments.
Change-Id: Ic0b0228e36704b127e5e399ce59db26182cfffe7
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: I0ba3c52513a5fdd194f1e7e2901092671398985b
We used set_partition_seg_context() only before calls to:
1. update_partition_context()
2. partition_plane_context()
Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.
Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9
missed one in vp9_detokenize.c in the last
+ add some asserts in vp9_decode_frame() to catch regressions
Change-Id: Ide67505114ee17efdafb13694aed0c09039e5a16
replace VP9D_COMP usage with the (slightly) more targeted
VP9_COMMON/MACROBLCKD/struct segmentation structures.
Change-Id: Iabb3616e231417b0e17b7e4b384ea63167a81745
This 2-pass rate control setting allocates bits based
on first pass stats to each kf group, gf group and individual
frame but does not correct the bits left and allocation after
each frame.
In other words it recommends a bit allocation for each frame
but does not try and correct any over or under spend on a
frame over the remainder of the clip. This reduces the accuracy
of rate control in terms of hitting an average bitrate but prevents
problems that may arise because early frames either use to many
or too few bits. This mode is currently more inclined to undershoot
than overshoot (particularly at higher data rates).
Also minor changes to rate of adaption when recode loop is not
enabled.
This mode is currently enabled by default for VBR.
It gives the following % performance gains.
derf +0.467, +1.072
yt 2.962, 2.645
stdhd 1.682, 1.595,
yt-hd 2.3, 2.174
Change-Id: I3c84a9bf8884e5b345698ff0e19187f792c2f3a0
Delta reduced because of concern about popping on some
very hard clips.
Also allow some frame recode at speed 2 for kf/gf/arf.
Change-Id: Ib47dff42da41aa6eec83b7285fcaaca24abb851e
Renames for consistency with other constants:
NUM_FRAME_TYPES -> FRAME_TYPES
NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS
Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f
This patch fixed a bug that caused 32bit PIC build mismatch. The
stack pointer was modified after "GET_GOT". Loading left pointer
from a hard-coded position gave wrong result.
Change-Id: Iea0aec6f917b12a6b3393ffc986bad74510248cc
Commit "d207 intra prediction ssse3 using bytes" caused mismatch
while building 32bit PIC code. Disabled these SSSE3 functions
until we fix the bug.
Change-Id: Ic444e531d3d4058092fe6eab09006b44fcb18e4c
This commit makes the buffer allocation of zcoeff_blk array in
pick_mode_context block size aware. It calculates the number of
4x4 blocks in the partition and assigns the memory space accordingly.
This process (and the uninitialization) is done once for each encoding
pass. It allows memory copy of smaller buffer when possible.
For football at 600kbps, the runtimes improve by about 1%:
speed 1, 45961ms -> 45472ms
speed 2, 23863ms -> 23598ms
Change-Id: Id2ca24906fa89f46fa5fe742ec4b8efc2a61f877
in most cases at least the left column was a harmless race as it was
left unused later in the code.
Change-Id: I43211df66fb157c6feecf08c681add4fcf18b644
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: Ibc944952a192e6c7b2b6a869ec2894c01da82ed1
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: I2d95fdcbba96aaa0ed24a80870cb38f53487a97d
That makes decoder and encoder (only bitstream writing part) a little bit
simpler and faster. Moving get_sb_index() function to the encoder.
Change-Id: Ie91aaeefd69c84b085948267b33556a7666c6278
Making this change in order to move allow_high_precision_mv field
from MACROBLOCKD structure to VP9_COMMON (because it is a frame level
flag).
Change-Id: I1d006ba36d938e0caf4d40fa051e2e38df9c1108
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: Id623c5113262655fa50f7c9d6cec9a91fcb20bb4
cherry-picked from:
commit 988b70844e03efcfcc075a9bc25d846670494f36
Author: Pascal Massimino <pascal.massimino@gmail.com>
Date: Fri Aug 2 11:15:16 2013 -0700
add WebPWorkerExecute() for convenient bypass
This is mainly for re-using the worker structs without using the
thread.
Change-Id: I8e1be29e53874ef425b15c192fb68036b4c0a359
Original source:
http://git.chromium.org/webm/libwebp.git
100644 blob c0d318aee628fdf9ba4876451a28aa978f1066b8 src/utils/thread.c
100644 blob c2b92c9fe353f8e514f78922f3d237204a9cbc66 src/utils/thread.h
Change-Id: I13fe92b1e94062bb99fdeeb7cb0b4b0575d27793
* changes:
Use a separate MODE_INFO stream for each tile column
Get rid of "this_mi", use "mi_8x8[0]" everywhere instead
Make the static_segmentation feature work again
The only case where they were intentionally pointing to different
structures was in mbgraph, and this didn't have the expected behavior
because both of these pointers are used interchangeably through the code
Change-Id: I979251782f90885fe962305bcc845bc05907f80c
Moving code that gets band_translate array from get_scan_and_band()
function to get_band_translate() function. Renaming get_scan_and_band() to
get_scan().
Change-Id: I43047c205a1ca2a6e24be44db39dc04b7a385008
This should be similar to what x264 does with --aq-mode 1.
It works well with clips like parkjoy and touhou
(http://x264.nl/developers/Dark_Shikari/LosslessTouhou.mkv).
At low bitrates, the segmentation signaling overhead may negate the
benefits of this feature.
(PGW) Default changed to feature OFF to allow provisional merge.
Change-Id: I938abf9bb487e1d4ad3b0264ea03d9826275c70b
Updated the encoder to handle frames that are coded
intra-only. Intra-only frames must be non-showable,
that is, the "show frame" flag must be set to 0 in
the frame header.
Tested by forcing the ARF frames to be coded intra-
only.
Note: The rate control code will need to be modified
to account for intra-only frames better than they
are currently handled.
Change-Id: I6a9dd5337deddcecc599d3a44a7431909ed21079
Remove the semicolon in the definition of vp9_zero macro. Make all
the use cases of vp9_zero of consistent format.
Change-Id: Ibaf9751e8595872b12766381a93d185a4d90df8f
