This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.
Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8
Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.
TODO:
- Missing check for maximum frame dimensions
(currently scaling uses 14 bits)
- Missing check for maximum scaling ratio
(upscaling 16:1, downscaling 2:1)
Problems:
- Straightforward fixed point implementation can cause error +-1
compared to integer division (i.e. in x_step_q4). Should only
be an issue for frames larger than 16k.
Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
We leave it in rdopt.c as a local define for now - this can be removed
later. In all other places, we remove it, thereby slightly decreasing
the size of some arrays in the bitstream.
Change-Id: Ic2a9beb97a4eda0b086f62c039d994b192f99ca5
This is a mostly-working implementation of an extra channel in the
bitstream. Configure with --enable-alpha to test. Notable TODOs:
- Add extra channel to all mismatch tests, PSNR, SSIM, etc
- Configurable subsampling
- Variable number of planes (currently always uses all 4)
- Loop filtering
- Per-plane lossless quantizer
- ARNR support
This implementation just uses the same contents as the Y channel
for the A channel, due to lack of content and general pain in
playing back 4 channel content. A later patch will use the actual
alpha channel passed in from outside the codec.
Change-Id: Ibf81f023b1c570bd84b3064e9b4b8ae52e087592
The previous code was somewhat vestigial for 16x16 MI units, but was
incorrect when called with chroma blocks larger than 4x4 because the
block index caused a reference to a non-existent BMI. This patch uses
the same MV for all chroma subblocks in SPLITMV mode, which is
suboptimal for non-4:2:0 subsamplings, but as SPLITMV may be removed
in the near future, will use this as a stop gap.
Change-Id: I3211cee5ccf1cfb426e5eef5353b0ce5bb92b4cd
Work-in-progress, not yet ready for review. TODO items:
- bitstream writing (encoder) and reading (decoder)
- decoder reconstruction
Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081
This originally was "Removed update_blockd_bmi()". Now,
this patch removed bmi from blockd and uses the bmi found
in mode_info_context. Eliminates unnecessary bmi copies between
blockd and mode_info_context.
Change-Id: I287a4972974bb363f49e528daa9b2a2293f4bc76
This commit enables rectangular block prediction of compound
inter-intra mode. It combines the mb/sb32/sb64 prediction functions
into a unified version with configurable block width and height.
This fixes the enc/dec mismatch of the codebase when
comp-interintra-pred is enabled.
Change-Id: I1d0db2f1f184007802df04fcd12b9dadb3189ff0
Removes the redundant dst pointers from vp9_build_inter_predictors_sb{y,uv}
and the remaining mb specific functions.
Change-Id: I7b6bf439d9394b85ea79b4fe61a3ffc1025720da
First in a series of commits moving the framebuffers pointers to
per-plane data, so that they can be indexed numerically rather than
by name.
Change-Id: I6e0d60fd4d51e6375c384eb7321776564df21775
Similar to the prior change that removed the rounding from non-SPLITMV
modes. Improves quality by a similar amount (Additional +0.087% on derf)
Change-Id: I39d80b4a3037a3aa7e285eb2320346ddaf646f52
Consider the previous behavior for the MV 1 3/8 (11/8 pel). In the
existing code, the fractional part of the MV is considered separately,
and rounded is applied, giving a result of 6/8. Rounding is not required
in this case, as we're increasing the precision from a q3 to a q4, and
the correct value 11/16 can be represented exactly.
Slight gain observed (+.033 average on derf)
Change-Id: I320e160e8b12f1dd66aa0ce7966b5088870fe9f8
This commit converts the luma versions of vp9_build_inter_predictors_sb
to use a common function. Update the convolution functions to support
block sizes larger than 16x16, and add a foreach_predicted_block walker.
Next step will be to calculate the UV motion vector and implement SBUV,
then fold in vp9_build_inter16x16_predictors_mb and SPLITMV.
At the 16x16, 32x32, and 64x64 levels implemented in this commit, each
plane is predicted with only a single call to vp9_build_inter_predictor.
This is not yet called for SPLITMV. If the notion of SPLITMV/I8X8/I4X4
goes away, then the prediction block walker can go away, since we'll
always predict the whole bsize in a single step. Implemented using a
block walker at this stage for SPLITMV, as a 4x4 "prediction block size"
within the BLOCK_SIZE_MB16X16 macroblock. It would also support other
rectangular sizes too, if the blocks smaller than 16x16 remain
implemented as a SPLITMV-like thing. Just using 4x4 for now.
There's also a potential to combine with the foreach_transformed_block
walker if the logic for calculating the size of the subsampled
transform is made more straightforward, perhaps as a consequence of
supporing smaller macroblocks than 16x16. Will watch what happens there.
Change-Id: Iddd9973398542216601b630c628b9b7fdee33fe2
Use in-place buffers (dst of MACROBLOCKD) for macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.
Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df
In decoder, the scaling calculation, such as (mv * x_num / x_den),
is fairly time-consuming. In this patch, we check if the scaling
happens or not at frame level, and then decide which function to
call to skip scaling calculation when no scaling is needed. Tests
showed a 3% decoder performance gain.
Change-Id: I270901dd0331048e50368cfd51ce273dd82b8733
Combine superblock inter predictors into a unified function that
allows configurable block width and height. The inter predictions
of block sizes smaller than 16x16 are handled differently. To be
continued on merging them later.
Change-Id: I14075959dd5e221f00c205c99ca35c1c31ef728e
This patch will use the dest buffer instead of the
predictor buffer. This will allow us in future commits
to remove the extra mem copy that occurs in the dequant
functions when eob == 0. We should also be able to remove
extra params that are passed into the dequant functions.
Change-Id: I7241bc1ab797a430418b1f3a95b5476db7455f6a
Took vp9_setup_scale_factors_for_frame() out from
vp9_setup_interp_filters(), so that it is only called once per
frame instead of per macroblock. Decoder tests showed a 1.5%
performance gain.
Change-Id: I770cb09eb2140ab85132f82aed388ac0bdd3a0aa
Almost all arguments for vp9_build_inter32x32_predictors_sb and
vp9_build_inter64x64_predictors_sb can be deduced from the first macroblock
argument.
Change-Id: I5d477a607586d05698d5b3b9b9bc03891dd3fe83
Adds an experiment to use a weighted prediction of two INTER
predictors, where the weight is one of (1/4, 3/4), (3/8, 5/8),
(1/2, 1/2), (5/8, 3/8) or (3/4, 1/4), and is chosen implicitly
based on consistency of the predictors to the already
reconstructed pixels to the top and left of the current macroblock
or superblock.
Currently the weighting is not applied to SPLITMV modes, which
default to the usual (1/2, 1/2) weighting. However the code is in
place controlled by a macro. The same weighting is used for Y and
UV components, where the weight is derived from analyzing the Y
component only.
Results (over compound inter-intra experiment)
derf: +0.18%
yt: +0.34%
hd: +0.49%
stdhd: +0.23%
The experiment suggests bigger benefit for explicitly signaled weights.
Change-Id: I5438539ff4485c5752874cd1eb078ff14bf5235a
Renaming Width to width, Height to height and Version to version in
several structs and function signatures.
Change-Id: I084c3f7e747cb2ce3345aff27a3dff9b13a87543
Updates the YV12_BUFFER_CONFIG structure to be crop-aware. The
exiting width/height parameters are left unchanged, storing the
width and height algined to a 16 byte boundary. The cropped
dimensions are added as new fields.
This fixes a nasty visual pulse when switching between scaled and
unscaled frame dimensions due to a mismatch between the scaling
ratio and the 16-byte aligned sizes.
Change-Id: Id4a3f6aea6b9b9ae38bdfa1b87b7eb2cfcdd57b6
