On scene-cut detected frames (i.e., high_source_sad = 1), use
nonrd_pick_partition (over choose_part + select_part), as
the nonrd_pick partitioning is generally better.
Small positive increase in metrics on ytlive set (~0.5 - 1%).
Negligle overall speed decrease, as its only used on scene-cut frames.
Only affects 1 pass vbr mode, speed = 5.
Change-Id: I07c89cbdc75f5bb16eb8e0e2773ead0980d2de5c
This reverts commit be12fefa4b7d224e9f39275a6bb4fab01b8bae3b
and commit 057c1c4034ba5b9bf360c5c1f600ebc6d0718c3a.
Also, the mismatch between the avx version and the
c version has been fixed.
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1168
For a rt encode using 1080p@60fps material, up to 11% performance
improvement overall was seen.
Change-Id: Icd1f216209ebc6fc0b8da885f32f356fa4355ed0
The eob of a block is not perperly set when skip_recode is true,
thus triggering assert(eob <= default_eob) to fail.
Change-Id: Ifecbe33dce2dc4903e0a80bd384dc09bf0dd8a44
Code cleaup, use existing rolling_actual/target metrics instead,
set threshold to get same/similar effect.
Little/no change in metrics on ytlive set.
Change-Id: I74f3c3d0a143a9cf20dc9c3dee54c0f7e6a97a51
Add a max condition and lower the min value.
No change in behavior (metrics for yt live set) for the
default min/max_gf_interval=4/16 settings.
Small positive change when min/max_gf_interval=7/16
(for 60fps clips on ytlive set).
Change-Id: I1c1d72425c86c69419ea43fb9730130e81062f91
Increase in the damping used in adjusting the active Q range.
This does hurt rate accuracy a little in a few extreme cases
especially if the clip is very short*, but helps metrics.
* Note that the adjustment is applied at the GF/ARF group level based
on what happened in the last group. Hence for very short clips where
the length of a single group may be a significant % of the clip length
there is still scope for some drift that cannot be accommodated.
In practice most data points in our test sets are now much closer to target
than was previously the case with default settings and in some cases are
better even than they were with the command line undershoot and overshoot
parameter was set very low (e.g. 2%). For example in bridge_close at high rates
the old mechanism was unable to adapt enough to prevent extreme overshoot.
Change-Id: I634f8f0e015b5ee64a9f0ccaa2bcfdbc1d360489
Change to the calculation of the error divisor used in
get_twopass_worst_quality(). This follows on from other
changes to the rate control that impact the output of this
function.
Change-Id: I414fa9aa1e6a68a64dccea17c3712f44b8a0c10c
Changes to the function the redistributes bits from overshoot
or undershoot throughout the rest of the clip to respond more
quickly.
Change-Id: I90f10900cdd82cf2ce1d8da4b6f91eb5934310da
Added a factor based on the bit spend in the last arf group vs the
target to adjust the choice of the active worst quality in subsequent
groups.
Helps clips where previously there was a big overshoot or undershoot
to adapt and get closer to the target rate.
Change-Id: I67034b801679b99024409489a2273ea6fe23b8e6
The use of this value is preventing rate adjustment on clips
or sections that have very little motion but high noise and
this can give rise to some sections with massive overshoot.
Change-Id: I9a65c7c1148dc5d3a7d8b23e50fc1733f3661621
Skip intra-mode and some inter-modes (newmv, nearmv, nearestmv) for
golden frame if the variance got from choose_partitioning is very low.
Only for 1 pass real-time CBR mode and bsize >= 32x32, it has ~2.5%
speed up with less than 0.1% PSNR drop for rtc test set. Don't see
visual regression.
Change-Id: I70efbc95a1007231ae36f02c5b2fbf6cd35077ad
For non-rd pickmode:
best_pred_sad, computed for NEWMV-last, is only used for
skipping golden non-zero modes. Add condition to avoid this
computation if not used (i.e, if golden nonzero modes are not used).
And remove code for computing best_pred_sad for NEWMV-golden,
since that sad is not used.
No change in behavior; small speed gain (~1%) for svc encodes.
Change-Id: Ic2cbdef6c4e9a233a57c0db0eeac8ad5fcead366
Function level timing test shows about 27% time saving on
a Xeon E5-2680 v2 desktop.
Rename vp9_dct_sse2.c to vp9_dct_intrin_sse2.c for vp9 and
rename dct_sse2.c to dct_intrin_sse2.c for vp10 to avoid
duplicate basenames.
Actually vp9_fwht4x4_mmx/sse2() and vp10_fwht4x4_mmx/sse2()
are identical. TODO: They should be unified later if there is
no intention to keep a duplicate.
Change-Id: I3e537b7bbd9ba417c606cd7c68c4dbbfa583f77d
- Avoid excessive copying
- Don't both searching if no update can possibly offer savings
- Simplify the interface
- Remove the confusing vp9_cost_upd256 macro
Change-Id: Id9d9676a361fd1203b27e930cd29c23b2813ce59
vp9_diamond_search_sad_avx was disabled in:
057c1c4 disable vp9_diamond_search_sad_avx
this removes a missing prototype warning as the prototype is no longer
included in vp9_rtcd.h. the file can be restored if someone gets around
to fixing the issue.
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1168
Change-Id: Ia9fda4b81c53dc5fba7c31d780d761f886940b52
Move the logic for rechecking zeromv on denoised block out to simplify
the function. To simplify the param passing, add a new structure
VP9_PICKMODE_CTX_DEN which is only used when denoiser is enabled.
Change-Id: Iaa9b4396dfcb8147236c02d4a1868a09103a4476
Rename and change to how its updated.
Only affects 1 pass vbr.
Small change in metrics (< ~0.1%) on ytlive set.
Change-Id: Ibb1fe485699b6c4a8194951c8f229abe2f64b9a5
Added actual and absolute rate miss values to the opsnr.stt
stats output line.
Changes to the borg graphing may be needed before merge.
Change-Id: I1e9d548ce445d29002f0c59ebfd3957a6f15e702
Bug found by Yunqing relating to the correction for size at 8K and
above in get_twopass_worst_quality().
The basis for the correction was changed to the linear size relative to
1080P as a baseline and the adjustment has been clamped to prevent
problems at extreme images sizes.
For 1080P the results on our test sets were neutral but the low res and
mid res sets saw a small gain (0.1%-0.2% average).
I would also expect some gains on 4k and larger content where the
previous correction was overly aggressive.
Change-Id: I30b026b5f4535e9601e3178d738066459d19c8fb
Add control API VP9E_SET_TARGET_LEVEL that allows the encoder to
control the output bitstream level and/or keep level related
statistics.
Usage:
255 do not care about level (default)
0 keep level related stats only
10 target for level 1
11 target for level 1.1
.
.
.
62 target for level 6.2
Usage for vpxenc:
--target-level=0/255/10/11...
Change-Id: I31d1aeca19358b893e7577b4e63748c8e614034a
block_variance: This operates on 8x8s and would be safe with a int32 *
int32 to uint32 multiply, but this is potentially unsafe for 12-bit
input. Unfortunately the code already segfaults on 12-bit input:
https://bugs.chromium.org/p/webm/issues/detail?id=1223
calculate_variance: This operates on up to a 32x32 of 8x8s and can
overflow even with 8-bit input (log2((256*32*32)**2) == 36).
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1220
Change-Id: I1ca4ff6092db9a7580da371ee9a21f403fdadc40
