Add datarate test, for both VBR and CBR mode, with the
frame_parallel_decoding mode disabled (and error_resilience off).
Change-Id: I54feec3248a68ecff4bef8d9a31bb1616fab77df
In the new AUTO mode, restrict the minimum alt-ref interval and max column
tiles adaptively based on picture size, while not applying any rate control
constraints.
This mode aims to produce encodings that fit into levels corresponding to
the source picture size, with minimum compression quality lost. However, the
bitstream is not guaranteed to be level compatible, e.g., the average bitrate
may exceed level limit.
BUG=b/64451920
Change-Id: I02080b169cbbef4ab2e08c0df4697ce894aad83c
This reverts commit 8c42237bb2.
Because ssse3 code is used for the reference, the qcoeff and dqcoeff
reference buffers must be aligned.
Original change's description:
> quantize avx: copy 32x32 implementation
>
> Ensure avx and ssse3 stay in sync by testing them against each other.
>
> Change-Id: I699f3b48785c83260825402d7826231f475f697c
Change-Id: Ieeef11b9406964194028b0d81d84bcb63296ae06
Move class VpxScaleBase to new file test/vpx_scale_test.h.
Add new file test/vp9_scale_test.cc with ScaleFrameTest.
BUG=webm:1419
Change-Id: Iec2098eafcef99b94047de525e5da47bcab519c1
Makes main thread wait for the filter level to be picked to avoid a race
between the LPF thread and update_reference_frames(). This also
re-enables the failing tests under thread_sanitizer where this data race
was detected.
BUG=webm:1460
Change-Id: I7f5797142ea0200394309842ce3e91a480be4fbc
This reverts commit df9ce12259.
Reason for revert:
Re-enabled tests still fail tsan in high bitdepth.
Original change's description:
> Re-enable disabled tests under TSan.
>
> These tests point to an already-fixed bug, this should no longer have a
> data race.
>
> BUG=webm:1049
>
> Change-Id: Iaedc5db8df99362bdc501b70ff7fdebf8756fdb8
TBR=jzern@google.com,pbos@chromium.org,builds@webmproject.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: webm:1049
Change-Id: I232f1f7726bf795b301abfb2e07cad6756642e53
This reverts commit f60d1dcd3d.
Reason for revert: <INSERT REASONING HERE>
Failures in AVX/VP9QuantizeTest in nightly tests.
Original change's description:
> quantize avx: copy 32x32 implementation
>
> Ensure avx and ssse3 stay in sync by testing them against each other.
>
> Change-Id: I699f3b48785c83260825402d7826231f475f697c
TBR=slavarnway@google.com,johannkoenig@google.com,builds@webmproject.org
Change-Id: Ibd38636212269328317dd0721be9d25452113d1c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Still does not pass tests. Does match the previous assembly, although
saving the sign before multiplying is dubious.
Change-Id: Ia163f18c755aba542d6e93f7bf7343184660df5a
Adds an early exit based on ptest. Slightly slower than ssse3 in the
full case because of the extra check, but potentially faster if lots of
rows can be skipped.
Very close in speed to the assembly.
Can run in 32 bit, unlike the assembly. Allows reworking the function
prototype to use structs.
Change-Id: If80e2b9ba059370a4cad3c973196e82a97b4330e
About 4x faster when values are below the dequant threshold and 10x
faster if everything needs to be calculated.
Both numbers would improve if the division for dqcoeff could be
simplified.
BUG=webm:1426
Change-Id: I8da67c1f3fcb4abed8751990c1afe00bc841f4b2
This condition is handled before this code is reached. The ssse3 version
of the function has always crashed when attempting to handle the
skip_block condition.
Add assert() and comments regarding the usage of skip_block.
Removing the parameter is a fairly involved process so leave it be for
the moment.
Change-Id: Ib299f6fc6589d7ee102262cc74a7aeb60110bc5a
Having a very small value for "lag_in_frames" can result in
corrupt arf groups including displayed frames that update
the arf buffer and fake overlay frames that are not in fact
overlays of real arfs but are nevertheless starved of bits.
Leaving lag_in_frames at the default of 25 for these 5 frame two
pass VBR tests should now give rise to a valid ARF coding pattern
as follows:- K(ey), A(rf), N(ormal), N, N, O(verlay).
This change is part of a response to BUG=webm:1454 where broken
arf groups interacted badly with a change that corrects for large rate
misses. However, it may still in some cases increase encode time by
virtue of the fact that the unit test now codes a correct coding pattern
with "hidden" ARF frames.
Change-Id: Ifd0246a4c1d0be247247c754024d7a4ed5f66a6b
Use input with a narrow range because the filter only applies when the
frames are similar.
Run CompareReferenceRandom more times. Especially before narrowing the
input range, the filter frequently did not apply.
Change-Id: Ie249bedf6d0d33dfa5884611cb1835788e418b38
this test fails with the configuration similar to the assembly prior to:
d52cb5972 quantize: copy ssse3 optimizations to intrinsics
BUG=webm:1458
Change-Id: Idc5c0b84c0598259fc49609a9f0756de531d3baf
With skip block the neon is about twice as fast as C.
The neon has no shortcut for coeff < zbin so it always takes the
same amount of time. Even if the C can take the shortcut, it is over
twice as fast in neon. If it can't, that gap increases to over 10x.
BUG=webm:1426
Change-Id: I400722146c1b5a5f6289f67d85fd642463d2bfc6
Fairly minor differences from sse2. pabsw and psignw are the big gains.
Also re-uses some values in eob calculation to avoid an extra pcmp.
Fixes test failures in HBD and OS X builds.
Allows using it in 32bit builds, where it is about 40% faster than sse2.
Substantially faster than the assembly for skip_block. 10-20% faster the
rest of the time.
Change-Id: If783bb3567e561e47667e10133b9c84414a334e2
Originally, for the purpose of keeping a fast first pass, the first-pass
stats between row_mt_mode = 0 and row_mt_mode = 1 are not bit exact, but
that difference is very small that doesn't cause a mismatch between the
final bitstreams. However, if the encoder changes, this minor difference
may cause a mismatch. Thus, this patch always forces the first pass to
be bit exact.
BUG=webm:1453
Change-Id: I2b67cf529dee81f660f9d9e7fe9a60ea3c7b12b8
With skip block or coeff < zbin it is about twice as fast as C.
If most coeff values are > zbin it is about 10-15x as fast as C.
BUG=webm:1426
Change-Id: I5d3c007b014a372d5ef0882b39bb48983b4131c7
This reverts commit 03f5e300d6.
This causes test failures under OSX:
SSSE3/VP9QuantizeTest.EOBCheck/0
SSSE3/VP9QuantizeTest.OperationCheck/0
Change-Id: I122732717ead1f7af5b04c529a6948e382e5e59b
Avoid unsigned overflow warning:
unsigned integer overflow: 19974 - 32703 cannot be represented in type
'unsigned int'
Change-Id: Ifebee014342e4c6f3b53306c0cad6ae0b465ac12
Officially the quant structures are 8 elements, with one dc element and
7 repeated ac elements. The low bit depth optimizations take advantage
of this to fill the xmm registers. The high bit depth version manually
duplicates the values.
If all the optimizations were unified, the structure sizes could be
greatly reduced.
Change-Id: Ibd7a0337a7832ce2a1a05ee433c310077e1059ae
Use only valid values for quantize inputs. These were determined by
looping over vp9_init_quantizer and looking for max and min values.
This allows extending the test to the low bit depth functions which were
not designed to handle all possible inputs but only valid inputs.
Change-Id: I94e1d8863a49ac227845b65c6b50130e10e6319e
Although the low bitdepth functions are identical (excepting the need
for larger intermediate values) they do not pass these tests. This
improves the error output to aid debugging.
Simplify buffer usage with Buffer and removing unnecessarily aligned
variables.
eob is a single element and never written using aligned instructions.
BUG=webm:1426
Change-Id: Ic95789a135cf1e8a3846d85270f2b818f6ec7e35
