Fix misplaced cast that caused an overflow and incorrect rate adaptation
behavior for high data rates. This in particular will have affected 4k encodes
but could also have come into play for some higher rate 1080p cases.
In our standard test sets the quality impact is small though several high rate
clips show improved rate accuracy. This can also impact the number of recode
loop hits and on one problem 4k clip the encode time for speeds 0 and 1 was
reduced by >25%
Change-Id: I108da7ca42f3bc95c5825dd33c9d84583227dac1
Use it to limit NEWMV early exit in nonrd pickmode
Small change in RTC metrics, has some improvement
for high motion clips.
Change-Id: I1d89fd955e1b3486d5fb07f4472eeeecd553f67f
Adjust the threshold for turning off cyclic refresh for high motion,
and avoid testing golden in nonrd pickmode for speed >= 8 if
golden refresh was long ago.
No change/neutral on RTC metrics.
Change-Id: I40959b8d9637f3553e7458bbabd8c6024c2c09c0
Set the base_mv_aggressive for temporal enhancement layers (TL > 0).
Under the aggressive mode, skip the NEWMV depending on the
SSE of the base_mv. Also reduce the subpel motion to 1/2 under
aggressive mode if base_mv is good.
Speedup ~3% with small/negligible loss in quality on RTC.
Affects speed >= 6.
Change-Id: I89341b279cad6da2a04b76d5e726016191dacdb8
This was ported from the greedy version in AV1, written by Dake He
(dkhe@google.com).
See:
https://aomedia.googlesource.com/aom/+/master/av1/encoder/encodemb.c#137
Greedy version is disabled by default, but can be picked by setting
USE_GREEDY_OPTIMIZE_B to 1.
To be enabled by default later.
This is both faster and better in terms of compression.
Compression Improvement:
------------------------
lowres: -0.119
midres: -0.064
hdres: -0.405
Speed Improvement:
------------------
(Based on encode time of 3 videos of different difficulties at
3 different target bitrates)
With --cpu-used=0: 0.38% to 5.55% faster
With --cpu-used=1: 0.24% to 2.79% faster
With --cpu-used=2: 0.29% to 1.46% faster
Change-Id: Ia7a23b3b244ad8eb253ac9e43cd03c5e021d2635
Set subpel prune_evenmore only for non_reference frames,
instead of all TL > 0 frames. Gain some quality back at
cost of small speed loss (~1-2%).
Change only effects SVC encoding at speed >= 7.
Change-Id: I5b9f51e51dccfd7050521a66996176b0415ca3f9
Keep the 1/4subpel for all frames, use SUBPEL_TREE_PRUNED_EVENMORE
for all temporal enhancement layer frames.
Change-Id: Ibc681acbb6fc75b7b3c57fc483fcb11d591dfc9a
It is initialized to be { INT_MAX, 0, ... } in ffe0f9b.
No effect on encoders.
Make it consistent with other initializations.
BUG=webm:1440
Change-Id: Ie2a180d93626b55914c8c4255e466a1986d2b922
visual studio will warn if a 32-bit shift is implicitly converted to 64.
in this case integer storage is enough for the result.
since:
f3a9ae5ba Fix ubsan failure in vp9_mcomp.c.
Change-Id: I7e0e199ef8d3c64e07b780c8905da8c53c1d09fc
For SVC 1 pass non-rd mode:
Force subpel seach off for SVC for non-reference frames
under motion threshold.
Add flag to svc context to indicate if the frame is not used
as a reference.
Little/no quaity loss, ~2% speedup.
Change-Id: Ic433c44b514d19d08b28f80ff05231dc943b28e9
Speed >=8: for resolutions above CIF, and for low motion content,
set subpel_search_method to SUBPEL_TREE_PRUNED_EVENMORE.
Small speed gain (~2%) on vga clips,
RTC metrics up by ~2-3% on average.
Change-Id: Ie26ba0264589652f92dfe74308740debf94cf0cc
Split vp8/vp9 implementations on yv12_copy_frame_c.
Remove high-bitdepth codes from vp8_yv12_extend_frame_borders_c.
Clean up vp8 codes usage in vp9.
BUG=webm:1435
Change-Id: Ic68e79e9d71e1b20ddfc451fb8dcf2447861236d
Fix the condition on usage of source_sad for temporal layers.
FIx allows it to be used for the case of 1 temporal layer.
Change-Id: I02b1b0ade67a7889d1b93cee66d27c0951131fc3
Adjust the max_copied_frame setting for temporal layers.
Keep the same setting for non-SVC at speed 8.
This change also enables copy_partiton for non-SVC at speed 7,
but with smaller value of max_copied_frame (=2).
~2% speedup for SVC speed 7, 3 layers, with little/no quality loss.
Change-Id: Ic65ac9aad764ec65a35770d263424b2393ec6780
For aq-mode=3: refactor the condition for turning off
the refresh. Add some adjustments for high motion content.
No/little change in RTC metrics, only affects high motion case.
Change-Id: I7da8eabfb0e61db014be4562806f72ee5ef4a43b
When temporal layers are used, only allow for copy partition
on the top temporal enhancement layer frames.
Change-Id: I5472abdc0f9f6c8dafa75a7a84c615e08ae22af8
Only affects speed 8.
Make changes to copy partition to fix a bug in setting microblock
offset. Avg PSNR shows 0.02% gain on rtc_derf and 0.08% loss on rtc.
Change-Id: I61c3e5914dde645331344388e7437e5638acd4f3
The modified error was a derivative of the "coded_error"
that was used to allocate bits between different frames on the
assumption that the allocation should be linear in terms of this
modified error. I.e. a frame with double the modified error score
should all things being equal get double the number of bits. The
code also included upper and lower caps derived from input
VBR parameters.
This patch improves the initial calculation of the clip mean error
(now called "mean_mod_score" as it is no longer a prediction error)
used as the midpoint for the rate distribution function and normalizes
the output "modified scores" scores such that 1.0 indicates a frame
in the middle of the distribution. The VBR upper and lower caps are
then applied directly to a frame's normalized score.
This refactoring is intended to make it easier to drop in alternative
distribution functions or to base the rate allocation on a corpus wide
midpoint (rather than the clip mean).
Change-Id: I4fb09de637e93566bfc4e022b2e7d04660817195
Most existing first pass stats are stored in a form normalized to a
macro-block scale. However the error scores for intra / inter etc were
stored as frame level values but mainly used as MB level values.
This change fixes that. Normalized per MB values make comparisons
between different formats easier and in any case this is usually what is
wanted.
An change in results should be limited to slight differences in rounding.
*** Change after patch 8 +2 requiring new approval.
Final pre-submit testing showed one 4K clip with above expected change.
Investigation showed this was due to a value used to test for ultra low intra
complexity in key frame detection. This was a per frame not per MB value but
also did not scale with frame size. Replacement with a small per MB value
(based on original per frame value and cif frame size) resolved the KF detection
problem.
Also converted kf_group_error_left to a double in line with other error values
to reduce rounding problems in KF group bit allocation
All clips and sets now show nominal (or 0) change as expected.
Change-Id: Ic2d57980398c99ade2b7380e3e6ca6b32186901f
Move the tran_low_t helper functions to a new file. Additional
load/store functions will be added here.
Change-Id: I52bf652c344c585ea2f3e1230886be93f5caefc3
