Adds two new vp9 parameters --min-gf-interval and --max-gf-interval
to enable testing based on frequency of alt-ref frames.
Also adds a unit-test to test enforcement of min-gf-interval.
For both these parameters the default value is 0, which indicates
they are picked by the encoder, based on resolution and framerate
considerations. If they are greater than zero, the specified
parameter is honored.
(Additional note by paulwilkins)
Note that there is a slight oddity in that key frames are also GFs and
considered part of GF only group. However they are treated as not
being part of an arf group because for arf groups the previous GF is
assumed to be the terminal or overlay frame for the previous group.
(end note)
Change-Id: Ibf0c30b72074b3f71918ab278ccccc02a95a70a0
This commit moves the primitive multi-threading files from vp9
folder to vpx_thread, which will be accessible by all vpx codec.
Change-Id: Ib51e66e9c69801c10631fab56d35a0c0aaed5883
to MB_MODE_INFO_EXT. This saves 36 bytes per 8x8 area for
both the decoder and encoder. (encoder has two MODE_INFO
buffers)
Change-Id: If006abb2224acaf326df3c2be09e77e967662107
Decision to scale down/up is based on buffer state and average QP
over previous time window. Limit the total amount of down-scaling
to be at most one scale down for now.
Reset certain quantities after resize (buffer level, cyclic refresh,
rate correction factor).
Feature is enable via the setting rc_resize_allowed = 1.
Change-Id: I9b1a53024e1e1e953fb8a1e1f75d21d160280dc7
If the frame size increases, the tile data buffer needs to be
re-allocated according to the number of tiles existing in current
frame. This patch makes the multi-tile encoding work in spatial
SVC usage case, and partially solved WebM issue 1018.
Change-Id: I1ad6f33058cf5ce6f60ed5024455a709ca80c5ad
PSNR HVS is a human visual system weighted version of SNR that's
gained some popularity from academia and apparently better matches
MOS testing.
This code is borrowed from the Daala Project but uses our FDCT code.
Change-Id: Idd10fbc93129f7f4734946f6009f87d0f44cd2d7
Force split on 16x16 block (to 8x8) based on the minmax over the 8x8 sub-blocks.
Also increase variance threshold for 32x32, and add exit condiiton in choose_partition
(with very safe threshold) based on sad used to select reference frame.
Some visual improvement near moving boundaries.
Average gain in psnr/ssim: ~0.6%, some clips go up ~1 or 2%.
Encoding time increase (due to more 8x8 blocks) from ~1-4%, depending on clip.
Change-Id: I4759bb181251ac41517cd45e326ce2997dadb577
The vbp thresholds are set seperately for boosted/non-boosted
superblocks according to their segment_id. This way we don't
have to force the boosted blocks to split to 32x32.
Speed 6 RTC set borg test result showed some quality gains.
Overall PSNR: +0.199%; Avg PSNR: +0.245%; SSIM: +0.802%.
No speed change was observed.
Change-Id: I37c6643a3e2da59c4b7dc10ebe05abc8abf4026a
Frame buffers are now allocated dynamically on-demand.
Entries in the reference frame map, cm->ref_frame_map,
may now be set to -1 (INVALID_IDX) to indicate that
there is not a valid reference buffer in that "slot".
All slots in the reference frame map are now initialized
to the empty state (-1) and each buffer is initialized
to have a reference count of 0.
Change-Id: Id1afe98de98db4ae8b2dfefed7889c3b28c68582
This is to avoid redo the same calculation repeatly, and also allow
easier adjustments for further experiments.
This commit shall have no effect on quality/compression.
Change-Id: I4460acf5c808ff5518da18d21e002c5da58af857
Note: This feature is still in development.
Add an option for the encoder to decide the resolution
at which to encode each frame.
Each KF/GF/ARF goup is tested to see if it would be
better encoded at a lower resolution. At present, each
KF/GF/ARF is coded first at full-size and if the coded
size exceeds a threshold (twice target data rate) at
the maximum active Q then the entire group is encoded
at lower resolution.
This feature is enabled in vpxenc by setting:
--resize-allowed=1
In addition, if the vpxenc command line also specifies
valid frame dimensions using:
--resize-width=XXXX & --resize_height=YYYY
then *all* frames will be encoded at this resolution.
Change-Id: I13f341e0a82512f9e84e144e0f3b5aed8a65402b
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
1. Added row-based loopfilter in encoder;
2. Moved common multi-threaded loopfilter functions from decoder
to common;
3. Merged multi-threaded loopfilter code, and made encoder/
decoder call same function to reduce code duplication.
Encoder tests showed that 1% - 2% speedup was seen for good-quality
2-pass mode(at speed 3); 1% - 3% speedup using 2 threads and 4% - 6%
speedup using 4 threads were seen for real-time mode(at speed 7).
Change-Id: I8a4ac51c2ad9bab9fa7b864e90743931c53ec1c4
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
When testing frame sse to choose a loop filter value and
when checking ambient error in kf Q selection, use 64 bit
values for accumulating the sse, to avoid risk of overflow
for large image formats.
Change-Id: I03765d16c843d0ade61a45b0cd46312472697e57
Initial patch to remove get_zbin_mode_boost() and
cpi->zbin_mode_boost.
For now sets a dummy value of 0 for zbin extra pending
a further clean up patch.
Change-Id: I64a1e1eca2d39baa8ffb0871b515a0be05c9a6af
The restructure moves the decision into the rd pick
modes loop and makes a decision based at the 16x16
block level instead of only the 64x64 level.
This gives finer granularity and better visual results
on the clips I have tested. Metrics results are worse
than the old AQ2 especially for PSNR and this mode
now falls between AQ0 and AQ1 in terms of visual
impact and metrics results.
Further tuning of this to follow.
It should be noted that if there are multiple iterations
of the recode loop the segment for a MB could change
in each loop if the previous loop causes a change in the
complexity / variance bin of the block. Also where a block
gets a delta Q this will alter the rd multiplier for this block
in subsequent recode iterations and frames where the
segmentation is applied.
Change-Id: I20256c125daa14734c16f7cc9aefab656ab808f7
Currently, VP9 supports column-tile encoding, which allows a frame
to be encoded in multiple column tiles independently. The number of
column tiles are set by encoder option "--tile-columns". This
provides a way to encode a frame in parallel.
Based on previous set of patches, this patch implemented the tile-
based multi-threaded encoder. Each thread processes one or more
tiles.
Usage:
For HD clips:
--tile-columns=2 --threads=1/2/3/4
While using 4 threads, tests showed that the encoder achieved
2.3X - 2.5X speedup at good-quality speed 3, and 2X speedup at
realtime speed 5.
Change-Id: Ied987f8f2618b1283a8643ad255e88341733c9d4
Each tile's tok starting address is calculated before the encoding
process. These addresses are stored so that the same calculation
won't be done again in packing bit stream.
Change-Id: I0a3be0301f002260c19a850303f2f73ebc47aa50
This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
