Fixes a rollover of the cx_time variable for encodes that take
over ~4200 seconds. Also enable the time estimate in first pass.
Change-Id: Ib5a98ee71bccd79a804d709cec7260651d0b7141
Scales the input of the encoder using libyuv's "box filter". Each stream
may have a different width and height specified. If the width (or
height) parameter is missing (or is explicitly set to 0) then the value
will be calculated based on the specified height (or width) and the
input file's dimensions, preserving its aspect ratio. Leaving the height
unspecified behaves similarly.
Change-Id: Ic7026810b13be030826be80dc6f7fc4aaf0c35d0
This patch includes 4x4, 8x8, and 16x16 forward butterfly ADST/DCT
hybrid transform. The kernel of 4x4 ADST is sin((2k+1)*(n+1)/(2N+1)).
The kernel of 8x8/16x16 ADST is of the form sin((2k+1)*(2n+1)/4N).
Change-Id: I8f1ab3843ce32eb287ab766f92e0611e1c5cb4c1
Allows the user to specify whether decode errors should be fatal or not.
Also makes mismatches optionally fatal.
Change-Id: I58cff4a82f3d42f5653b91cf348a7f669377e632
These allow sending partial bitstream packets over the network before
encoding a complete frame is completed, thus lowering end-to-end
latency. The tile-rows are not independent.
Change-Id: I99986595cbcbff9153e2a14f49b4aa7dee4768e2
Make the progress line more useful by providing per-frame updates of
processing frame rate and estimated time remaining.
Fixes issue #534.
Change-Id: Ic91551878ff4b2f5db1cedaafb588add220cfa52
Refactor the 8x8 inverse hybrid transform. It is now consistent
with the new inverse DCT. Overall performance loss (due to the
use of this variant ADST, and the rounding errors in the butterfly
implementation) for std-hd is -0.02.
Fixed BUILD warning.
Devise a variant of the original ADST, which allows butterfly
computation structure. This new transform has kernel of the
form: sin((2k+1)*(2n+1) / (4N)). One of its butterfly structures
using floating-point multiplications was reported in Z. Wang,
"Fast algorithms for the discrete W transform and for the discrete
Fourier transform", IEEE Trans. on ASSP, 1984.
This patch includes the butterfly implementation of the inverse
ADST/DCT hybrid transform of dimension 8x8.
Change-Id: I3533cb715f749343a80b9087ce34b3e776d1581d
This patch adds column-based tiling. The idea is to make each tile
independently decodable (after reading the common frame header) and
also independendly encodable (minus within-frame cost adjustments in
the RD loop) to speed-up hardware & software en/decoders if they used
multi-threading. Column-based tiling has the added advantage (over
other tiling methods) that it minimizes realtime use-case latency,
since all threads can start encoding data as soon as the first SB-row
worth of data is available to the encoder.
There is some test code that does random tile ordering in the decoder,
to confirm that each tile is indeed independently decodable from other
tiles in the same frame. At tile edges, all contexts assume default
values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode),
and motion vector search and ordering do not cross tiles in the same
frame.
t log
Tile independence is not maintained between frames ATM, i.e. tile 0 of
frame 1 is free to use motion vectors that point into any tile of frame
0. We support 1 (i.e. no tiling), 2 or 4 column-tiles.
The loopfilter crosses tile boundaries. I discussed this briefly with Aki
and he says that's OK. An in-loop loopfilter would need to do some sync
between tile threads, but that shouldn't be a big issue.
Resuls: with tiling disabled, we go up slightly because of improved edge
use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf,
~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5%
on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is
concentrated in the low-bitrate end of clips, and most of it is because
of the loss of edges at tile boundaries and the resulting loss of intra
predictors.
TODO:
- more tiles (perhaps allow row-based tiling also, and max. 8 tiles)?
- maybe optionally (for EC purposes), motion vectors themselves
should not cross tile edges, or we should emulate such borders as
if they were off-frame, to limit error propagation to within one
tile only. This doesn't have to be the default behaviour but could
be an optional bitstream flag.
Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
Adds a flag to disable features that would inhibit frame parallel
decoding. This includes backward adaptation and MV sorting based
on search in ref frame buffer.
Also includes some minor clean-ups.
Change-Id: I434846717a47b7bcb244b37ea670c5cdf776f14d
Visual Studio reports and error on the line
static const int bsize2 = bsize >> 1;
"error C2099: initializer is not a constant"
Also warnings on signed/unsigned mismatch
Change-Id: I76cb06f736bd9c90107a26bfb3c130ec3f6c33de
Adds an error-resilient mode where frames can be continued
to be decoded even when there are errors (due to network losses)
on a prior frame. Specifically, backward updates are turned off
and probabilities of various symbols are reset to defaults at
the beginning of each frame. Further, the last frame's mvs are
not used for the mv reference list, and the sorting of the
initial list based on search on previous frames is turned off
as well.
Also adds a test where an arbitrary set of frames are skipped
from decoding to simulate errors. The test verifies (1) that if
the error frames are droppable - i.e. frame buffer updates have
been turned off - there are no mismatch errors for the remaining
frames after the error frames; and (2) if the error-frames are non
droppable, there are not only no decoding errors but the mismatch
PSNR between the decoder's version of the post-error frames and the
encoder's version is at least 20 dB.
Change-Id: Ie6e2bcd436b1e8643270356d3a930e8989ff52a5
Various fixups to resolve issues when building vp9-preview under the more stringent
checks placed on the experimental branch.
Change-Id: I21749de83552e1e75c799003f849e6a0f1a35b07
This patch allows use of 8x8 and 4x4 ADST correctly for Intra
16x16 modes and Intra 8x8 modes when the block size selected
is smaller than the prediction mode. Also includes some cleanups
and refactoring.
Rebase.
Change-Id: Ie3257bdf07bdb9c6e9476915e3a80183c8fa005a
Tags VP9 tracks with the V_VP9 video type when writing to .webm files,
and supports decoding both from vpxdec without specifying --codec.
Change-Id: I0ef61dee06f4db2a74032b142a4b4976c51faf6e
Creates a merge between the master and experimental branches. Fixes a
number of conflicts in the build system to allow *either* VP8 or VP9
to be built. Specifically either:
$ configure --disable-vp9 $ configure --disable-vp8
--disable-unit-tests
VP9 still exports its symbols and files as VP8, so that will be
resolved in the next commit.
Unit tests are broken in VP9, but this isn't a new issue. They are
fixed upstream on origin/experimental as of this writing, but rebasing
this merge proved difficult, so will tackle that in a second merge
commit.
Change-Id: I2b7d852c18efd58d1ebc621b8041fe0260442c21
This commit adds lossless compression capability to the experimental
branch. The lossless experiment can be enabled using --enable-lossless
in configure. When the experiment is enabled, the encoder will use
lossless compression mode by command line option --lossless, and the
decoder automatically recognizes a losslessly encoded clip and decodes
accordingly.
To achieve the lossless coding, this commit has changed the following:
1. To encode at lossless mode, encoder forces the use of unit
quantizer, i.e, Q 0, where effective quantization is 1. Encoder also
disables the usage of 8x8 transform and allows only 4x4 transform;
2. At Q 0, the first order 4x4 DCT/IDCT have been switched over
to a pair of forward and inverse Walsh-Hadamard Transform
(http://goo.gl/EIsfy), with proper scaling applied to match the range
of the original 4x4 DCT/IDCT pair;
3. At Q 0, the second order remains to use the previous
walsh-hadamard transform pair. However, to maintain the reversibility
in second order transform at Q 0, scaling down is applied to first
order DC coefficients prior to forward transform, and scaling up is
applied to the second order output prior to quantization. Symmetric
upscaling and downscaling are added around inverse second order
transform;
4. At lossless mode, encoder also disables a number of minor
features to ensure no loss is introduced, these features includes:
a. Trellis quantization optimization
b. Loop filtering
c. Aggressive zero-binning, rounding and zero-bin boosting
d. Mode based zero-bin boosting
Lossless coding test was performed on all clips within the derf set,
to verify that the commit has achieved lossless compression for all
clips. The average compression ratio is around 2.57 to 1.
(http://goo.gl/dEShs)
Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
Allows building the library with the gcc -pedantic option, for improved
portabilty. In particular, this commit removes usage of C99/C++ style
single-line comments and dynamic struct initializers. This is a
continuation of the work done in commit 97b766a46, which removed most
of these warnings for decode only builds.
Change-Id: Id453d9c1d9f44cc0381b10c3869fabb0184d5966
aligned buffers improve performace. this change brings vpxenc &
vp8_scalable_patterns in line with the other examples.
Change-Id: I4cf9f3e4728b901161905dd7ccb092e774ffb15f
Rather than using the static default maximum keyframe spacing
provided by vpx_codec_enc_config_default() set the default
value to 5 times the frame rate. Five seconds is too long for
live streaming applications, but is a compromise between seek
efficiency and giving the encoder freedom to choose keyframe
locations.
The five second value is from James Zern's suggestion in
http://article.gmane.org/gmane.comp.multimedia.webm.user/2945
Change-Id: Ib7274dc248589c433c06e68ca07232e97f7ce17f
This is the first patch to add superblock (32x32) coding
order capabilities. It does not yet do any mode selection
at the SB level, that will follow in a further patch.
This patch encodes rows of SBs rather than
MBs, each SB contains 2x2 MBs.
Two intra prediction modes have been disabled since they
require reconstructed data for the above-right MB which
may not have been encoded yet (e.g. for the bottom right
MB in each SB).
Results on the one test clip I have tried (720p GIPS clip)
suggest that it is somewhere around 0.2dB worse than the
baseline version, so there may be bugs.
It has been tested with no experiments enabled and with
the following 3 experiments enabled:
--enable-enhanced_interp
--enable-high_precision_mv
--enable-sixteenth_subpel_uv
in each case the decode buffer matches the recon buffer
(using "cmp" to compare the dumped/decoded frames).
Note: Testing these experiments individually created
errors.
Some problems were found with other experiments but it
is unclear what state these experiments are in:
--enable-comp_intra_pred
--enable-newentropy
--enable-uvintra
This code has not been extensively tested yet, so there
is every likelihood that further bugs remain. I also
intend to do some code cleanup & refactoring in tandem
with the next patch that adds the 32x32 modes.
Change-Id: I1eba7f740a70b3510df58db53464535ef881b4d9
The commit added a new command line option --test-decode to vpxenc.
The option enables encoder to decode compressed frames and test recon
buffers from the decode against those from encode for mismatch.
There are a few limitations on this option currently, one of them
being the match test is not done on a number of lagged frames at
the end of an encoding.
Change-Id: I80c29b46dcdcea9f48107a506b235743068862fe
this commit added a command line option to skip first n frames from
input file to facilitate debugging and testing.
Change-Id: I4ffc5f85fa7e193ea4bdee08cb236717de8beef1
The maximum psnr has a marginal impact on the overall output in high
quality encodings, the change will make sure the psnr output to be
consistent with encoder internal stats.
Change-Id: I35cf2f85008ec127a7d91c9eb69fa7811798ae32
Propagate debug setting to the EBML struct. When writing the application
name, this allows us to strip the version code and keep the output
metadata static.
Change-Id: I8e06c6abd743bedbff5af6242bbdae5d55754538
When we do 2-pass encoding, elapsed time is accumulated through
whole 2-pass process, which gives incorrect time and fps results
for second pass. This change fixed that by resetting the time
accumulator for second pass.
Change-Id: Ie6cbf0d0e66e6874e7071305e253c6267529cf20
Produce the token partitions on-the-fly, while processing each MB.
Context is updated at the beginning of each frame based on the
previoud frame's counters. Optimally encoder outputs partitions in
separate buffers. For frame based output, partitions are concatenated
internally.
Limitations:
- enabled just in combination with realtime-only mode
- number of encoding threads has to be equal or less than the
number of token partitions. For this reason, by default the encoder
will do 8 token partitions.
- vpxenc supports partition output (-P) just in combination with
IVF output format (--ivf)
Performance:
- Realtime encoder can be up to 13% faster (ARM) depending on the number
of threads and bitrate settings. Constant gain over the 5-16 speed
range.
- Token buffer reduced from one frame to 8 MBs
Quality:
- quality is affected by the delayed context updates. This again
dependents on input material, speed and bitrate settings. For VC
style input the loss seen is up to 0.2dB. If error-resilient=2
mode is used than the effect of this change is negligible.
Example:
./configure --enable-realtime-only --enable-onthefly-bitpacking
./vpxenc --rt --end-usage=1 --fps=30000/1000 -w 640 -h 480
--target-bitrate=1000 --token-parts=3 --static-thresh=2000
--ivf -P -t 4 -o strm.ivf tanya_640x480.yuv
Change-Id: I127295cb85b835fc287e1c0201a67e378d025d76
Add the ability to specify multiple output streams on the command line.
Streams are delimited by --, and most parameters inherit from previous
streams.
In this implementation, resizing streams is still not supported. It
does not make use of the new multistream support in the encoder either.
Two pass support runs all streams independently, though it's
theoretically possible that we could combine firstpass runs in the
future. The logic required for this is too tricky to do as part of this
initial implementation. This is mostly an effort to get the parameter
passing and independent streams working from the application's
perspective, and a later commit will add the rescaling and
multiresolution support.
Change-Id: Ibf18c2355f54189fc91952c734c899e5c072b3e0
dynamicly assign ARG_CTRL_CNT_MAX and
add check to make sure argument instance
doesnt already exist before creating a duplicate
Change-Id: I4f78a9c5346cda8e812cd89c077afe8996493508
To avoid a dependency on vpx_version.h, call the vpx_codec_version_str()
function and build up the string manually.
Change-Id: Ie650e9b8f2aaaffaa31da5e9ef3b566b972321b4
Since this is the only ABI incompatible change since the last release,
convert it to use the control interface instead. The member of the
configuration struct is replaced with the VP8E_SET_MAX_INTRA_BITRATE_PCT
control.
More significant API changes were expected to be forthcoming when this
control was first introduced, and while they continue to be expected,
it's not worth breaking compatibility for only this change.
Change-Id: I799d8dbe24c8bc9c241e0b7743b2b64f81327d59
Using small values for --buf-sz= in command line causes
floating point exception due to division by zero.
Change-Id: Ibfe2d44db922993a78ebc9a4a1087d9625de48ae
As reported in issue 331, vpxenc encoded incorrect webm file header
on big endian machines. This change fixed that.
Change-Id: I31924ebd476a87f3e88b9b5424540bf781d2b86f
For clips that are near 60fps and have a lot of alt refs, it's possible
that the ring buffer holding the previous frames sizes/pts could wrap
around, leading to a division by zero.
In addition to checking for this condition in the ring buffer loop,
the buffer size is made dependent on the actual frame rate in use,
rather than defaulting to 60, which should improve accuracy at frame
rates >= ~60.
Change-Id: If5a04d6e847316dc5f7504f25c01164cf9332be8
Add the --rate-hist=n option, which displays a histogram with n
buckets for the rate over the --buf-sz window.
Change-Id: I2807b5a1525c7972e9ba40839b37e92b23ceffaf
Add the --q-hist=n option, which displays a histogram with n buckets for
the quantizer selected on each frame.
Change-Id: I59b020c26b0acae0b938685081d9932bd98df5c9
Create a new input parameter to allow specifying
the packed frame stereo 3d format. A default value
of mono will be written in the absence of user
specified input
Change-Id: I576d9952ab5d7e2076fbf1b282016a9a1baaa103
Identified as a possible cause of issue #308, the code was silently
ignoring realloc failures, which would lead to corruption, memory
leaks, and likely a crash. The best we can do in this case is die
gracefully.
Change-Id: Ie5f6a853d367015be5b9712bd742778f3baeefd9
Map an enum to the --end-usage values, so you can specify
--end-usage=cq instead of --end-usage=2. The numerical values still
work for historical scripts, etc, but this is more user friendly.
Change-Id: I445ecd9638f801f5924a71eabf449bee293cdd34
Cast size_t to (unsigned long) and print it with the %lu format
string, which is more portable than C99's explict %zu for size_t.
This truncates on Windows x64 but otherwise works on 32 and 64 bit
platforms. In practice the stats file is unlikely to be so large.
Change-Id: I0432b3acf85fc6ba4ad50640942e1ca4614b21cb
Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
- armv5te-none-rvct
- armv6-none-rvct
- armv7-none-rvct
To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.
Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.
Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
The merge includes hooks to for CQ mode and other code
changes merged from the test branch.
CQ mode attempts to maintain a more stable quantizer within a clip
whilst also trying to adhere to a guidline maximum bitrate.
The existing target data rate parameter is used to specify the
guideline maximum bitrate.
A new parameter allows the user to specify a target CQ level.
For normal (non kf/gf/arf) frames, the quantizer will not drop BELOW the
user specified value (0-63). However, in some cases the encoder may
choose to impose a target CQ that is above that specified by the user,
if it estimates that consistent use of the target value is not compatible
with guideline maximum bitrate.
Change-Id: I2221f9eecae8cc3c431d36caf83503941b25e4c1
stats_close() was not freeing memory for
single pass runs. It now takes in arg_passes
to determine when it should free memory.
Change-Id: I6623b7e30b76f9bf2e16008490f9b20484d03f31
Add a new encoder control, VP8E_SET_TUNING, to allow the application
to inform the encoder that the material will benefit from certain
tuning. Expose this control as the --tune option to vpxenc. The args
helper is expanded to support enumerated arguments by name or value.
Two tunings are provided by this patch, PSNR (default) and SSIM.
Activity masking is made dependent on setting --tune=ssim, as the
current implementation hurts speed (10%) and PSNR (2.7% avg,
10% peak) too much for it to be a default yet.
Change-Id: I110d969381c4805347ff5a0ffaf1a14ca1965257
read_frame would incorrectly insert detect->buf into img
for ivf files. detect->position now set to 4 if input file is
detected to be ivf in file_is_ivf to keep this from occuring.
Change-Id: I5e235dd3033985bc62707a35c13af5984620208e
remove warning comment in vpxenc.c: in case of 1x1 picture,
detect_bytes will be equal to '3' and we'll fall back to
RAW_TYPE.
fix read_frame() by tracking the pre-read buffer length
in the struct detect
Change-Id: If1ed86ee5260dcdbc8f9d10da6cbb84a4cc2f151
When the first pts equaled 0 ivfenc was incorrectly increasing the
pts by 1. I changed the pts and last pts to be signed. I also set
the default value of last pts to -1.
Change-Id: I30bcec5af9b16d93fa9e3abbea7764b133e9cd73
Change Ice204e86 identified a problem with bitrate undershoot due to
low precision in the timestamps passed to the library. This patch
takes a different approach by calculating the duration of this frame
and passing it to the library, rather than using a fixed duration
and letting the library average it out with higher precision
timestamps. This part of the fix only applies to vpxenc.
This patch also attempts to fix the problem for generic applications
that may have made the same mistake vpxenc did. Instead of
calculating this frame's duration by the difference of this frame's
and the last frame's start time, we use the end times instead. This
allows the framerate calculation to scavenge "unclaimed" time from
the last frame. For instance:
start | end | calculated duration
======+=======+====================
0ms 33ms 33ms
33ms 66ms 33ms
66ms 99ms 33ms
100ms 133ms 34ms
Change-Id: I92be4b3518e0bd530e97f90e69e75330a4c413fc
The old value 1000 was too low, which caused the effective duration and
frame rate calculation to have an 1% error for typical 30 frame/second
inputs. Symptom of the issue has been that most 2 pass encodings were
undershooting target bit rate by 1% or so for 30 fps input.
Change-Id: Ice204e86f844ceb9ce973456f2b995cc095283cf
Defaulting to 320x240 for raw streams is arbitrary and error-prone.
Instead, require that the width and height be set manually if they
can't be parsed from the input file.
Change-Id: Ic61979857e372eed0779c2677247e894f9fd6160
STDIO streams are opened in text mode by default on Windows. This patch
changes the stdin/stdout streams to be in binary mode if they are being
used for I/O from the vpxenc or vpxdec tools.
Fixes issue #216. Thanks to mw AT hesotech.de for the fix.
Change-Id: I34525b3ce2a4a031d5a48d36df4667589372225b
This eliminates a large set of warnings exposed by the Mozilla build
system (Use of C++ comments in ISO C90 source, commas at the end of
enum lists, a couple incomplete initializers, and signed/unsigned
comparisons).
It also eliminates many (but not all) of the warnings expose by newer
GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
without checking the return values).
There are a few spurious warnings left on my system:
../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
change between the two if blocks that test it here.
../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum, and the C
standard does not mandate that enums be unsigned, so the checks can't be
removed.
Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
If --psnr option is enabled vpxenc will output PSNR values for the
entire file. Added a \n before final output to make sure the output
is on its own line. Overall and Avg psnr matches the values written
to opsnr.stt file.
Change-Id: I869268b704fe8b0c8389d318cceb6072fea102f8
MKV requires a unique(ish) TrackID element in the track info header.
Instead of the current hard-coded ID, take a hash of the video track
and use that. This value is not written in the deterministic output
mode, despite being a deterministic value itself, to give flexibility
to change the hash algorithm and not affect bisecting across the
change.
Change-Id: I807fc3ea6d1427a151c3ef703269b67e80aef860
By baking the version number into the output file, a hash of the file
will vary from commit to commit, even if the output is otherwise bit
exact. Add a -D option to suppress this behavior, for use when
bisecting or other debugging.
Change-Id: I5089a8ce5719920ffaf47620fa9069b81fa15673
Requiring the output file to be specified with the -o option opens up
the possibility of supporting multiple input files in the future.
Change-Id: I14c9b75e9b21184b47081e1ccf30cf4c91315964
The new WebM output support should be preferred to IVF, but we can't
change the default behavior of the ivf* tools. There are a few other
default behaviors for these tools that are counterintuitive for
historical reasons, and changing the binary name provides the
opportunity to clean those up as well. This patch takes the first
step by renaming the binaries.
Change-Id: I647008ae37cc352dd27ec1da7ed13489e0609b24
