Set on all 16x16 intra/inter modes
Features:
- Butterfly fDCT/iDCT
- Loop filter does not filter internal edges with 16x16
- Optimize coefficient function
- Update coefficient probability function
- RD
- Entropy stats
- 16x16 is a config option
Have not tested with experiments.
hd: 2.60%
std-hd: 2.43%
yt: 1.32%
derf: 0.60%
Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c
Apply 2D-DCT transform of dimension 8x8 to encode prediction
residuals of I8X8 mode.
Brought back block type 3 probability context model for 8x8 tokens,
which is used for the coefficients of Y blocks in I8x8 modes. The
coefficient costs estimate of I8X8 mode in rate-distortion is also
changed appropriately.
Performance results:
derf: 0.246
yt: 0.114
std-hd: 0.730
hd: 0.670
Change-Id: If1d970eeb4e1827c9f0d2c5b27d33089b347ea27
Merged the enhanced_interp experiment.
Found and fixed a bug in the include files framework, whereby
certain encoder files were still using the old INTERP_EXTEND
value of 3 instead of 4. The thresholds for mv range mcomp.c
need a small adjustment to prevent crashes.
The results are more or less unchanged.
Change-Id: Iac5008390f1efc97ce1102fbb5f8989c847fb579
Allows for swtiching/setting interpolation filters at the MB
level. A frame level flag indicates whether to use a specifc
filter for the entire frame or to signal the interpolation
filter for each MB. When switchable filters are used, the
encoder chooses between 8-tap and 8-tap sharp filters. The
code currently has options to explore other variations as well,
which will be cleaned up subsequently.
One issue with the framework is that encoding is slow. I
tried to do some tricks to speed things up but it is still slow.
Decoding speed should not be affected since the number of
filter taps remain unchanged.
With the current version, we are up 0.5% on derf on average but
some videos city/mobile improve by close to 4 and 2% respectively.
If we did a full-search by turning the SEARCH_BEST_FILTER flag
on, the results are somewhat better.
The framework can be combined with filtered prediction, and I
seek feedback regarding that.
Rebased.
Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
The following five experiments are merged:
newentropy
newupdate
adaptive_entropy (also includes a couple of parameter changes
that improves results a little
in common/entropymode.c and encoder/modecosts.c
that were not merged from the internal branch)
newintramodes
expanded_coef_context
Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270
Replaced local definitions of the extension required
by the filters with the globally defined value.
Change-Id: If9e590a1f2e5b0bdc2d3e3c3f04aacbd3b09bfee
Adds ADST/DCT hybrid transform coding for Intra4x4 mode.
The ADST is applied to directions in which the boundary
pixels are used for prediction, while DCT applied to
directions without corresponding boundary prediction.
Adds enum TX_TYPE in b_mode_infor to indicate the transform
type used.
Make coding style consistent with google style.
Fixed the commented issues.
Experimental results in terms of bit-rate reduction:
derf: 0.731%
yt: 0.982%
std-hd: 0.459%
hd: 0.725%
Will be looking at 8x8 transforms next.
Change-Id: I46dbd7b80dbb3e8856e9c34fbc58cb3764a12fcf
the integer version has very good precision, the float version is no
longer useful. this commit also removes the experiment option from
configure script.
Change-Id: Ibb92e63c9f5083357cdf89c559d584a7deb3353f
this commit removes a number of experiment options from configure
script. the associated experiments are already fully merged, the
options in configure script have no effect at all.
Change-Id: I8054ccaee0a04610162ed76ac9e59c4538217113
vp8_encode_inter_macroblock() is called in both pick_mb_modes() as
well as encode_sb(), thus the number of macroblocks in the counter
were twice as big as actual numbers. This doesn't affect output.
Change-Id: I6de8a996ee44d2f7f2080d8d2177dd7bc6207c93
This allows CONFIG_SUPERBLOCKS experiment to almost compile succesfully,
except for the missing pick_sb_modes() function.
Change-Id: Ib2322f2aacdc371e8066f2eb4a8d761c40490b4d
This is to avoid a rare encoder/decoder mismatch for MB using SPLITMV
mode. In decoder, the UV mv can be determined to need clamp, but the
flag is never set in encoder motion vector selection process, and the
clamp is not done in encoding in encoder.
Change-Id: I60520d3f790354c7855dadf03f0978ea9b77e2c0
This commit adds lossless compression capability to the experimental
branch. The lossless experiment can be enabled using --enable-lossless
in configure. When the experiment is enabled, the encoder will use
lossless compression mode by command line option --lossless, and the
decoder automatically recognizes a losslessly encoded clip and decodes
accordingly.
To achieve the lossless coding, this commit has changed the following:
1. To encode at lossless mode, encoder forces the use of unit
quantizer, i.e, Q 0, where effective quantization is 1. Encoder also
disables the usage of 8x8 transform and allows only 4x4 transform;
2. At Q 0, the first order 4x4 DCT/IDCT have been switched over
to a pair of forward and inverse Walsh-Hadamard Transform
(http://goo.gl/EIsfy), with proper scaling applied to match the range
of the original 4x4 DCT/IDCT pair;
3. At Q 0, the second order remains to use the previous
walsh-hadamard transform pair. However, to maintain the reversibility
in second order transform at Q 0, scaling down is applied to first
order DC coefficients prior to forward transform, and scaling up is
applied to the second order output prior to quantization. Symmetric
upscaling and downscaling are added around inverse second order
transform;
4. At lossless mode, encoder also disables a number of minor
features to ensure no loss is introduced, these features includes:
a. Trellis quantization optimization
b. Loop filtering
c. Aggressive zero-binning, rounding and zero-bin boosting
d. Mode based zero-bin boosting
Lossless coding test was performed on all clips within the derf set,
to verify that the commit has achieved lossless compression for all
clips. The average compression ratio is around 2.57 to 1.
(http://goo.gl/dEShs)
Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
Added the ability to optionally filter the prediction data
when inter modes are selected (excludes SPLITMV, for now).
The mode selection loop considers both the filtered and
non-filtered prediction data when choosing mode. The filter
can be turned on/off at the frame-level, or signaled for
each MB.
Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822
Incorporates mv_ref, mbsplit and second_mv into the adaptive
entropy framework. The mv_ref framework has been modified from
before.
Adds some clean-ups and fixes.
Results with the adaptive entropy experiment are currently up by
+1.93% on derf; +2.33% std-hd and +1.87% yt-hd.
Fixed a nasty intermittent bug.
Change-Id: I4b1ac9f9483b48432597595195bfec05f31d1e39
This patch incorporates adaptive entropy coding of coefficient tokens,
and mode/mv information based on distributions encountered in a frame.
Specifically, there is an initial forward update to the probabilities
in the bitstream as before for coding the symbols in the frame, however
at the end of decoding each frame, the forward update to the
probabilities is reverted and instead the probabilities are updated
towards the actual distributions encountered within the frame.
The amount of update is weighted by the number of hits within each
context.
Results on derf/hd/std-hd are all up by 1.6%.
On derf, the most of the gains come from coefficients, however for the
hd and std-hd sets, the most of the gains come from the mode/mv
information updates.
Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
This commit is to remove two arrays, which contain the probabilities
of how likely each probability in coef_probs table is updated. The
commit changed to use a fixed number "252".
Surprisedly, the overall impact on quality is close to zero, which
basically says the two big static arrays are not helpful at all.
derf: -0.016%, -0.020%
std-hd: 0.000%, -0.013%
yt: -0.022%, +0.007%
yt-hd: -0.038%, +0.034%
Change-Id: Ifee94d28a37dcab4f1d2b994bd5b07575be42b72
This commit added the ability to accumulate the coef stats across
different encodings using an intermediate binary stats files. The
accumulation happens only the binary stats file exists in current
directory. The encoder needs to be built with "ENTROPY_STATS" to
allow the output. The commit also fixed a few formating issues in
output stats file.
Change-Id: Ib1a41180aa554845cf51e4421a230b128a3a82b4
Changes to calculation of sr_coded_error to include 0,0 case.
Experimental use of sr_coded_error in calculating correction factor
for estimating the allowable Q range.
Reinstated some code needed for calculating section_intra_rating.
Add flash detection in calculation of KF boost
Increased tolerance in testing candidate key frames (needed with
longer motion search as this tends to slightly increase inter %.
Zbin changes for 8x8.
Other minor adjustments, refactoring and bug fixes.
Reinstated some motion break out clauses in boost loop
as their removal hurt a few 50fps clips badly in the std set.
It may be possible to remove them again later if a better way
can be found of preventing overly long gf intervals.
Change-Id: Iee686d0c31072828bb1ccd2bc63f5f1c7c548ea2
Variables m & mi were being dereferenced when they might
hold invalid values.
The fix is simply to move these dereferences to after the
point at which mb_row and mb_col are tested for validity.
Change-Id: Ib16561efa9792dc469759936189ea379d374ad20
This fix addresses some problems with very complex clips like
handling of flashes on clips like crew (which was made worse
by an earlier patch (derf and std-hd)).
Most clips a small effect but some between 1 & 2%
Derf +0.039, +0.211%
YT +0.042, +0.083%
Change-Id: I65fc7c13afc31482040068544dd65b8808f5cb4a
Removed the local scaling factor est_max_qcorrection_factor
and related code to simplify estimateq calculation (little effect
anyway)
Cap range of total correction factor.
Slight change to break out case to turn off arf.
Change-Id: I748187737ba93cfadf016f3dfdf8d2741934067f
the commit fixed a number of compiling issues when some epxeriments
are turned on at the same time.
Change-Id: Idb15b215e2d2a7d25f2707f99ef55a34e7301ce7
The commit changed how baseline 8x8 coefficient probabilities are
initialized, to be consistent with the initialization of baseline
4x4 coefficient probabilities.
The commit does not have any effect on compression.
Change-Id: Ifb3902b5dc0b0c2e6dc3aa5d4a6589d528e58355
Remove dependency on amount and speed of motion as this
may not behave well across different image sizes.
Tweak impact of % inter.
Add in experimental adjustment based on relative quality of an
older second reference frame.
Cap range of decay values allowed.
Some small + effect on derf but -ve on yt & hd at this stage.
Change-Id: I390d6f6ebe67a2eb0b834980d0d4650124980d3e
I now see I didn't write a very long description, so let's do it
here then. We took a pretty big quality hit (0.1-0.2%) from my
recent fix of the inversion of arguments to vp8_cost_bit() in the
RD reference frame costing. I looked into it and basically the
costing prevented us from switching reference frames. This is of
course silly, since each frame codes its own prob_intra_coded, so
using last frame cost indications as a limiting factor can never
be right.
Here, I've rewritten that code to estimate costings based partially
on statistics from progress on current frame encoding. Overall,
this gives us a ~0.2%-0.3% improvement over what we had previously
before my argument-inversion-fix, and thus about ~0.4% over current
git (on derf-set), and a little more (0.5-1.0%) on HD/STD-HD/YT.
Change-Id: I79ebd4ccec4d6edbf0e152d9590d103ba2747775
base the static image test off a measure of 0,0 motion
instead of the decay accumulator value.
Change "transition to still detection" to compare the
decay rate from successive frames.
Minor tweak to the arf extra boost given based on the
number of frames affected.
Removed unused variable mod_err_per_mb_accumulator.
Change-Id: Idd8360083ad409e45f133ce97dd2488259003e64
The commit added an integer version of 8x8 forward DCT, based on the
orginal forward DCT from VP6. The constants, roundings, and shifts
were adjusted to improve the accuracy. The latest patch has a very
similar accuracy in term of round trip error against the floating
point version.
It should be noted here that the purpose of the patch is to help
encoding speed and facilitate all other experiments. There will be
futher review in combination with inverse DCT before finalization.
configure with "--enable--int_8x8fdct" to use the integer version
Change-Id: I5a4f80507429f0e07cf02a13768ec81cbfddc5bc
Some marginal impact due to the fact that it makes use of
arf more likely / stable even in hard sections.
Change-Id: Ic72fda0f63eefc9433914b5d9cd374d515810129
Removed unused function.
Added tentative code to take error score of an older frame
into account when calculating Q range. However, for now
it is disabled pending merging other changes and testing.
Change-Id: Ie89955e70319dac31b79e3b833e3352712a061ec
Remove testing of whether we estimate that it will be possible
to code an arf at a lower Q than the ambient Q. This adds quite
a bit of extra code and complexity for marginal gain.
Factored out some code relating to ARNR selection to a separate
function as this is likely to be changed / simplified soon.
Change-Id: Ia1cf060405637ef5bbf7018355437be21d12375f
Removed odd *100 >> 4 factor from boost calculations. Not all the
calculations exactly match what was there before so there may be
some minor impact on results.
Some other minor tidying up in regard to coding conventions.
The specific values of factors and thresholds will likely change as
part of subsequent patches.
Change-Id: Id976321484ac02ba50294cf54fafbc17dda85686
These frames can force reference frame (arf), mode (zeromv) and skip,
which means that if we use compound prediction (i.e. arf+last), we
might use a blend of a perfect (arf) and an imperfect (last) predictor,
leading to semi-garbage display and thus a huge drop in SSIM/PSNR (up
to 10dB for some frames I analyzed).
Gives a +0.2% gain on YT.
Change-Id: If1f2b7899ad165684af3808fd379295e82558cbb
This is the first patch in a series of changes to the first
pass code. (Broken down for ease of testing/merging/review).
This patch introduces a new stats element "sr_coded_error".
This is the coded error recorded vs the second reference
frame (which is updated such that it lags by at least one frame).
No use is made of the new structure in this change so this patch
should have no material effect.
Removed some ifdefs and deprecated code (#if NEW_BOOST).
Removed twopass.gf_decay_rate (not used any more)
Change-Id: I1be672a73017f7c13fd50fb4f99236aa2ed30916
This commit changed the forward and the inverse 4x4 Walsh Hadamard
transform to a new pair, where the inverse transform can pefectly
reconstuct the input to forward transform. It also does so without
changing the input and output value range. Even more, it does not
change the complexity of the transforms.
While it was not expected to improve the results of our current test,
it does improve std-hd set by 0.2% on all metrics. No change on derf.
Change-Id: Ie4f23ddd3a0f3c5fbe97fb58399f860031f99337
1. block types
There are only three types of blocks for 8x8 transformed MBs, i.e. Y
block with DC does not exist for 8x8 transformed MBs as all MB using
8x8 transform have 2nd order haar transform. This commit introduced
a new macro BLOCK_TYPES_8X8 to reflect such fact.
2. context counters
This commit also fixed the mixed of context_counters between 4x4 and
8x8 transformed MBs. The mixed use of the counters leads me to think
the existing the context probabilities were not properly generated
from 8x8 transformed MBs.
3. redundant collecting in recoding
The commit also corrected the code that accumulates entropy stats by
making sure stats only collected for final packing, not during the
recode loop
Change-Id: I029f09f8f60bd0c3240cc392ff5c6d05435e322c
This commit adjusted slightly the 4x4 coefficents band definition to
better classify coefficients with similar distributions and usages.
It helps derf set about .1%, it is alos slightly positive for std-hd
set, where 4x4 blocks are used less frequently.
The commit also removed a const array not in use.
Change-Id: I78d16905d4036641ec905b0c32c190c1def5b249
The ARNR filter uses a motion compensated temporal filter,
but the motion estimation implementation accounts for the
cost of the mv in its decision making process. The ARNR
filter uses a dummy cost table initialized to 0 as a way
to ignore the mv costs (which are irrelevant to the filter).
This CL modifies the ARNR filter implementation to so that
the mv costing is ignored without the requirement for
dummy tables.
Change-Id: I0dd9620c3b70682f938b2a70912c11d4d7c9284c
Adds a speed feature to conduct a brute force search among a set of
available interpolation filters for the best one in an RD sense.
There is a gain of 0.4% on derf, 1.0% on Std-HD.
Patch 2: A macro added to determine if the encoder state is reset
for each new filter tried.
Patch 3: rebase, also fixes a bug (decodframe.c) introduced by a
couple of missing function pointer assignements.
Patch 4: rebase.
Change-Id: Ic9ccca9d8c35c6af557449ae867391a2f996cc29
This commit merge the QI mode experiment. As the experiment affects
the encoding of intra coding modes on key frame only, the overall
effect of the experiment on encoding tests is insignificant.
Change-Id: I9e4e3933adface88867ad429cee3986e529c511d
The commit merges the UVINTRA experiment and removed the related
macros. The overall effect of the experiment is a small gain (.1%
on derf)
Change-Id: Ia34b3312fb9b5b34c9ba111bf0fa78c6f78ac80b
Adds differential encoding of prob updates using a subexponential
code centered around the previous probability value.
Also searches for the most cost-effective update, and breaks
up the coefficient updates into smaller groups.
Small gain on Derf: 0.2%
Change-Id: Ie0071e3dc113e3d0d7ab95b6442bb07a89970030
This commit changed to enable the usage 8x8 transform for all frame
type, all resolution and all quantizer range. This has an overall
benefit .2% to .3% in term of compression, but more importantly,
the difficult clips benefits much more, up to 2% to 3% on clips
like football, harbour and so on.
We observed some weird humps on very high end on a couple of youtube
clips, but have determined the underly cause was the aggressive zbin
having an effect of lowering rate with lower quality, which have
an impact on slide show clips around 60DB.
The commit does not change the association between prediction mode
and transform size.
Change-Id: I33043bdce6207528ae00b4a4b26d8ff63cfea1f4
This is to prevent the evaluation of a mode from using values left
over from a mode evaluated prior in the loop.
Change-Id: Ife2c6ceb76d2f7365fd262515d3ae48229033c2d
