Local variables used at the setjmp() site need to be marked volatile.
Relevant excerpt from the 'man longjmp':
===============
The values of automatic variables are unspecified after a call to
longjmp() if they meet all the following criteria:
· they are local to the function that made the corresponding setjmp(3) call;
· their values are changed between the calls to setjmp(3) and longjmp(); and
· they are not declared as volatile.
===============
Change-Id: I093e6eeeedbf5f781d202248ca701ba2c29d3064
Fails to compile. Bad calls to vp9_alloc_frame_buffer
and vp9_realloc_frame_buffer in postproc.c
This reverts commit 399823b6f5.
Change-Id: I29f0e173f8e185d3a303cfdb17813e1eccb51e3a
Add support for setting byte alignment on the Y, U, and V plane of the
reference buffers. The byte alignment must be a power of 2, from 32 to
1024. A value of 0 sets legacy alignment.
Change-Id: I7c1399622f7aa68e123646369216b32047dda73d
If decoding starts with intra-only frame, there is a possibility
of using uninitialized entropy context, what leads to undefined
behavior.
Change-Id: Icbb64b5b1bd1e5de2a4bfa2884e56bc0a20840af
No more checking of corrupted reference frame as we skip
decoding any non-intra frame in case of frame corrupted.
Change-Id: I77d41bbb02fc5f61972740e2d411441eb6a17073
Synchronize all threads immediately as a subsequent decode call may
cause a resize invalidating some allocations.
fixes one aspect of crbug.com/437655
Change-Id: Ie993b62c2756478543206ddbe43ec6268d90a470
A flush bug is discovered during putting frame parallel decoder
into Android. This test will expose that bug.
Change-Id: Ia047f27972f4da0471649f79f1f91e7695297473
This patch was to fix the vpxdec fuzzing3 test failure. When an
error occurs, setjmp() is invoked, which calls the decoder
removing routine. In multiple thread situation, other threads
could try to access the frame context memory that is already
deallocated, thus causing a segfault.
An invalid unit test was added for this issue.
Change-Id: Ida7442154f3d89759483f0f4fe0324041fffb952
This will save the memory and improve the decode speed due to
removing unnecessary memset of big prev_mi array for
all the key frames.
Decoding a all key frames 1080p video shows speed improve around 2%.
Change-Id: I6284a445c1291056e3c15135c3c20d502f791c10
This will save a lot of memory for decoder due to removing of prev_mi,
but prev_mi is still needed in encoder. So this will increase a little bit
memory for encoder.
Change-Id: I24b2f1a423ebffa55a9bd2fcee1077dac995b2ed
This patch allocated frame contexts outside VP9_COMMON. This allows
multiple threads to share the same copy of frame contexts, and
reduces the overhead. It also guarantees the correct update of
these contexts during bitstream packing. This patch doesn't change
encoding result.
Change-Id: Ic181a2460b891d1d587278a6d02d8057b9dbd353
Using 4 threads, frame parallel decode is ~3x faster than single thread
decode and around 30% faster than tile parallel decode for frame parallel
encoded video on both Android and desktop with 4 threads. Decode speed is
scalable to threads too which means decode could be even faster with more threads.
Change-Id: Ia0a549aaa3e83b5a17b31d8299aa496ea4f21e3e
This should be set right after decoder really start to decode frame
instead setting at the end.
Even decoder does not have a displayable frame to show and return NULL
to application, this should be set too.
Change-Id: If0313a834bc64e3b0f05a84f4459d444d9eab0d8
this removes an assumption that worker->data1 would be pointing to a
TileWorkerData allocation.
additionally, within the multi-threaded loopfilter pass VP9LfSync as a
parameter to the worker hook, removing the need for a shadow pointer in
LFWorkerData.
Change-Id: Ic7b2faa34e3eb59dbcb8a7c67f333448fa047c88
move them from VP9Worker::data[12] to allow the structure to be reused a
bit more naturally by the multi-threaded loopfilter.
Change-Id: I31b49c9e93ca744fd7f6d6ed8696671188fb2c1d
Function will jump to error handler when ref buffer is corrupted.
So "xd->corrupted |= ref_buffer->buf->corrupted;" is useless.
Change-Id: I35353a0637ad0dbb682454e040ef69fa68280bfa
The functions b_width_log2 and b_height_log2 only do direct
table fetch. This commit unifies such use cases by using the
table directly and removes these functions.
Change-Id: I3103fc6ba959c1182886a2799d21b8b77c8a7b6b
The coefficient range checking is enabled when configured with
--enable-debug --enable-coefficient-range-checking
for vpxdec to detect ill-formed input stream. This addresses the
problem raised by issue #792.
Change-Id: I3f9ea541de4dc742dd64389d6c5f543fb1c4f052
mi_grid_* are arrays of pointer to pointer. They save the pointers that point
to the MIs in cm->mi. But they are unnecessary and complicated. The original
goal was to remove MODE_INFO_t copy. But with an extra MODE_INFO_t pointer
inside MODE_INFO_t, same goal could be achieved.
This commit totally removes the mi_grid_* structures. But there are still
many dummy MODE_INFO_t inside cm->mi which are a waste of memory. Next commit
will do on-demand MODE_INFO_t allocation in order to save these memories.
Change-Id: I3a05cf1610679fed26e0b2eadd315a9ae91afdd6
Adds various high bitdepth transform functions and tests.
Much of the changes are related to using typedefs tran_low_t
and tran_high_t for the final transform cofficients and intermediate
stages of the transform computation respectively rather than fixed
types int16_t/int. When vp9_highbitdepth configure flag is off,
these map tp int16_t/int32_t, but when the flag is on, they map
to int32_t/int64_t to make space for needed extra precision.
Change-Id: I3c56de79e15b904d6f655b62ffae170729befdd8
don't bother decoding any further after receiving an earlier decode
error until a key/intra-only frame is encountered.
Change-Id: I381917b70d7a9e6f8d6de42e3d181bb113a4cec4
the code currently checks whether the allocation has been done instead
of allocating on the first frame.
since:
4f27202 vp9: fix crash in mt loopfilter w/corrupt file
this change defers the allocation until the loop filter is used.
Change-Id: I660c1b7f34e713a8dd9884483f01d23b9847366e
allocations within vp9_alloc_context_buffers() rely on mi_rows/mi_cols
individually, use those to determine whether to realloc rather than
stride and stride * rows. this fixes a crash with some fuzzed files for
invalid accesses into last_frame_seg_map and above_context.
Change-Id: I7b9f40dcf170d443890f3bd2acd285507943c7d4
proceeding using a corrupt (incompletely decoded) frame reference may
lead to incorrect assumptions about allocation sizes leading to a crash.
Change-Id: I76e74f2e1be127c2e2c7e1174bb3307497dfd23d
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
store the number of allocated rows in VP9LfSync, the calculated values
can not be relied on when dealing with corrupt material.
Change-Id: I13b8bcec9738c299a71df726772ab7ac05511e5b
this change is proactive: the loop filter expects valid input and may
produce undefined results / crash in other cases.
Change-Id: I6cc1e966062a91cbc6db981c87cd03d9129fc8fe
attempting to decode a frame after the previous frame failed has the
potential of interrupting an earlier loop filter task
Change-Id: I6f2b1ddcdf5b89c3e2ee8caf5289dada2a087d66
if the first frame was corrupt and loop filter not called, the next call
would assume the necessary allocations had been done and segfault when
accessing a NULL pointer
Change-Id: Ib6ef505e5c594e6f0fe65ab0700172bcf06b92a6
The case where frame width increases but the overall memory
size required to hold the mi arrays does not was not
handled.
Change-Id: I72e70b912a7d1766687ad682979f1c9ee124449b
1. Clean the code for encode frame tests
2. Add encode w/ and w/o alt reference frame test
3. Add encode SNR layers test
4. Add encode multiple layers but decode partial layers test
Change-Id: Ibd2c9bc02525db584a6f931a98405f2d851b3cd6
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
Replaced encoder and decoder functions to get a pointer
to a reference frame with a common function, vp9_get_ref_frame,
and simplified it.
Change-Id: Icb206fcce8caace3bfd1db3dbfa318dde79043ee
