For 1 pass CBR mode: increase waiting time after key frame
before we start sampling rate control behavior for determining
resize. This change need to disable one internal resize(DownUp)
temporally since it requires a longer clip to do so.
Change-Id: If21beda1be23f169ee541ab4dd642f718347887a
this avoids redefining vpx_codec_vp9_dx, vpx_codec_vp9_dx_algo in
vp9_encoder_parms_get_to_decoder.cc
Change-Id: I3b89e7a62497227ee32419f1a7d30e4c10a13c05
A new version of vp9_highbd_error_8bit is now available which is
optimized with AVX assembly. AVX itself does not buy us too much, but
the non-destructive 3 operand format encoding of the 128bit SSEn integer
instructions helps to eliminate move instructions. The Sandy Bridge
micro-architecture cannot eliminate move instructions in the processor
front end, so AVX will help on these machines.
Further 2 optimizations are applied:
1. The common case of computing block error on 4x4 blocks is optimized
as a special case.
2. All arithmetic is speculatively done on 32 bits only. At the end of
the loop, the code detects if overflow might have happened and if so,
the whole computation is re-executed using higher precision arithmetic.
This case however is extremely rare in real use, so we can achieve a
large net gain here.
The optimizations rely on the fact that the coefficients are in the
range [-(2^15-1), 2^15-1], and that the quantized coefficients always
have the same sign as the input coefficients (in the worst case they are
0). These are the same assumptions that the old SSE2 assembly code for
the non high bitdepth configuration relied on. The unit tests have been
updated to take this constraint into consideration when generating test
input data.
Change-Id: I57d9888a74715e7145a5d9987d67891ef68f39b7
If high bit depth configuration is enabled, but encoding in profile 0,
the code now falls back on optimized SSE2 assembler to compute the
block errors, similar to when high bit depth is not enabled.
Change-Id: I471d1494e541de61a4008f852dbc0d548856484f
The serial decode check is too strict for tile-threaded decoding as
there is no guarantee on the decode order nor which specific error
will take precedence. Currently a tile-level error is not forwarded so
the frame will simply be marked corrupt.
Change-Id: I51cf1e39e44bedeac93746154b36a4ccb2f059b1
define NOMINMAX to allow the std:: versions to be used; min/max will be
defined transitively via windows.h otherwise
Change-Id: I692b03fa3e70b7a53962d3fd209498f70f712fed
In the decoder, map this to the output variable vpx_image_t.r_w/h.
This is intended as an improved version of VP9D_GET_DISPLAY_SIZE,
which doesn't work with parallel frame decoding. In the encoder,
map this to a codec control func (VP9E_SET_RENDER_SIZE) that takes
a w/h pair argument in a int[2] (identical to VP9D_GET_DISPLAY_SIZE).
Also add render_size to the encoder_param_get_to_decoder unit test.
See issue 1030.
Change-Id: I12124c13602d832bf4c44090db08c1009c94c7e8
these have been supported in tile-threaded decoding since:
b3b7645 vp9_dthread: remove frame_parallel_decoding_mode requirement
Change-Id: Ia5a752db9be937153cf4830d9258752136356d1b
remove static from fdct4/8/16/32 in vp10/encoder/dct.c
add prefix vp10_ to fdct4/8/16/32
add vp10/encoder/dct.h
Change-Id: I644827a191c1a7761850ec0b1da705638b618c66
Reallocation of mi buffer fails if change size on the first frame and
change config in subsequent frames. Add a condition for resolution
check to avoid assertion failure.
BUG=1074
Change-Id: Ie26ed816a57fa871ba27a72db9805baaaeaba9f3
the range check in dct.c (abs(input[i]) < (1 << bit)) will fail in many
cases. this was broken at the time this check was added
BUG=1076
Change-Id: I3df8c7a555e95567d73ac16acda997096ab8d6e2
the range check in dct.c (abs(input[i]) < (1 << bit)) will fail in the
25-29 range. this was broken at the time this check was added
Change-Id: I8ca9607f6cbdc8be7f47696ffeabbab3ac5727e2
In decoder, export (eventually) into vpx_image_t.range field. In
encoder, use oxcf->color_range to set it (same way as for
color_space).
See issue 1059.
Change-Id: Ieabbb2a785fa58cc4044bd54eee66f328f3906ce
Verify the dynamic resizer behavior for real time, 1 pass CBR mode.
Start at low target bitrate, raise the bitrate in the middle of the
clip, verify that scaling-up does occur after bitrate changed.
Change-Id: I7ad8c9a4c8288387d897dd6bdda592f142d8870c
Verify the dynamic resizer behavior for real time, 1 pass CBR mode.
Run at low bitrate, with resize_allowed = 1, and verify that we get
one resize down event.
Change-Id: Ic347be60972fa87f7d68310da2a055679788929d
Unify the style of fdct4() fdct8() fdct16()
Add fdct32()
Add range_check() at each stage
Add unit test at ../../test/vp10_dct_test.cc
Change-Id: I13f76d9046c3ea473c82024b09a5bc8662e2c28e
1) copy following files from vpx_dsp/ to vp10/common/
vp10_inv_txfm.c
vp10_inv_txfm.h
vp10_inv_txfm_sse2.c
vp10_inv_txfm_sse2.h
2) change the function prefix "vpx_" to "vp10_" in above files
3) add unit test at vp10_inv_txfm_test.cc
Change-Id: I206f10f60c8b27d872c84b7482c3bb1d1cb4b913
avoid duplicating internal structures and include vp9_dx_iface.c
directly. these had fallen out of sync after the frame-parallel branch
merge.
Change-Id: I604cfbffa95abe2a1c8e906a696f32436b1422ed
this file needs to be reworked to remove the duplication of codec
internals + allow for divergence of vp9 and vp10
Change-Id: I6266b94ccfbc24dae30148f134804b52aa411b88
Unify the style of fdct4() fdct8() fdct16()
Add fdct32()
Add range_check() at each stage
Add unit test at ../../test/vp10_dct_test.cc
Change-Id: I9e912b2c5683862e65c5a21abc3e1c260cca4576
* changes:
test: limit the valid image size on OS/2
configure: add -Zhigh-mem to LDFLAGS on OS/2
configure: disable PIC on OS/2
Makefile: add $(STACKREALIGN) to CFLAGS for vp9_reconintra.c
x86inc.asm: fix NASM compilation
The test file compiler fails if one uses --disable-vp8-decoder
--enable-vp9-decoder. It effectively turns on CONFIG_VP8 and
CONFIG_DECODERS, but turns off CONFIG_VP8_DECODER, which causes
compiler error at test_vector_test.cc.
This commit fixes this issue by adding vp8/9 decoder flags to
the decoder behavior test, respectively.
Change-Id: I097ff8fd5e12715a94a565a82e54503885eb7187
and FUN_CONV_2D macros. The predict lut now handles
this case. The encoder now calls vpx_scaled_2d() instead
of vpx_convolve8() for scaling.
Change-Id: Ia1c8af8a31e4cb4887a587143108cb45835f7df7
This commit clears all the vp9_ prefix use case in vpx_dsp. It gets
the vp9 folder ready to branch out vp10.
Change-Id: I2906eec179ee792b4af8c9b4161313653050e931
This commit clears the function naming convention in vpx_dsp. It
replaces vp9_ prefix of global functions with vpx_ prefix. It also
removes the vp9_ prefix from static functions.
Change-Id: I6394359a63b71a51dda01342eec6a3cc08dfeedf
This commit moves the module inverse transform functions from vp9
to vpx_dsp folder. The hybrid transform wrapper functions stay in
the vp9 folder, since it involves codec-specific data structures.
Change-Id: Ib066367c953d3d024c73ba65157bbd70a95c9ef8
It in essence refactors the code for both the interpolation
filtering and the convolution. This change includes the moving
of all the files as well as the changing of the code from vp9_
prefix to vpx_ prefix accordingly, for underneath architectures:
(1) x86;
(2) arm/neon; and
(3) mips/msa.
The work on mips/drsp2 will be done in a separate change list.
Change-Id: Ic3ce7fb7f81210db7628b373c73553db68793c46
