Use the existing scene/content change detection to better
update/adjust golden frame refresh.
Change only affects 1 pass real-time vbr mode, speed >=5.
Change-Id: I2963a5bb7ca4a19f8cf8511b0a925e502f60e014
move to encoder_encode() as vp9_get_compressed_data() allocates data and
would require some modification to make its error return meaningful.
Change-Id: I8ddc390a1441afd0ff937842fa4ad1053c956133
External dynamic resize with swapping width and height was
not handled properly.
Fix is to re-init loop-filter under certain condtions.
Modify unittest to test this case.
Without this change test will fail.
Relates to: https://bugs.chromium.org/p/webm/issues/detail?id=1140
Change-Id: I7d81ca7fe0783b3bc103a52a7b7cf073a96be26e
allocations done within this function are protected with
vpx_internal_error; adding the setjmp fixes a crash in
vp9_lookahead_push() under low memory conditions.
Change-Id: I4b79dca37cc7fadc4b7633f0db44c0e406799bc6
An issue exists with reference_masking in non-rd pickmode for spatial
scaling. It was kept off for internal dynamic resizing and svc, this
change is to keep it off also for external dynamic resizing.
Update to external resize test, and update TODO to re-enable this
at frame level when references have same scale as source.
Change-Id: If880a643572127def703ee5b2d16fd41bdbf256c
When the codec frame size is the same as the reference frame size,
release the scaled reference before assigning it a new buf_idx.
Only affects 1 pass non-svc mode, where the scaled references are
release only under certain conditions (to prevent un-needed scaling
of the references every frame).
Modified a unittest that can trigger this bug without this change.
https://code.google.com/p/chromium/issues/detail?id=582598
Change-Id: I9a884e36ebd7608b1641ec2a469e20a4f829cf43
If the application changes frame size (external size changes),
and aq-mode=3 is on, reset the cyclic refresh.
Modify the TestExternalResize unittest (longer run with more resize
actions). Without this change an assert would be triggered on this
longer test.
Change-Id: I0eefd2cd7ffa0c557cca96ae30d607034a2599ce
The postproc vp9_denoise() is a spatial denoise/blur function.
It was not intended to be used if temporal denoising is enabled.
Change-Id: I97d2dcb941e7cc49bbafce99d9286beb2693249d
Changes to mode selection for 1 pass SVC mode:
use base layer motion vector, changes to intra-prediction.
Change-Id: I3e883aa04db521cfa026a0b12c9478ea35a344c9
This patch fixes a bug that causes the loop filter search to reset to
a low value or zero after each arf overlay frame. We expect the overlay
frames to need little or no loop filtering but this should not propagate.
Change-Id: I895b28474cf200f20d82793f3de40b60b19579fd
Different quality levels are used for different regions in
the frame depending on how far they are vertically from the
center. Specifically, three segments are used based on the
mi_row index with respect number to the number of mi_rows in
the frame.
Change-Id: Ifc8b777bc58ea8521dffc4640360c67d99f8d381
For testing implemented a fixed pattern and delta, 1 pass,
fixed Q, low delay mode.
This has not in any way been tuned or optimized.
Change-Id: Idf5ee179b277fa15d07a97f14f2ce5bbaae80a04
Keep track of frame indexes for the references, and
constrain inter mode search for reference with same
temporal alignment.
Improves speed by about ~15%, no noticeable loss in
compression performance.
Change-Id: I5c407a8acca921234060c4fcef4afd7d734201c8
This change alters the nature and use of exhaustive motion search.
Firstly any exhaustive search is preceded by a normal step search.
The exhaustive search is only carried out if the distortion resulting
from the step search is above a threshold value.
Secondly the simple +/- 64 exhaustive search is replaced by a
multi stage mesh based search where each stage has a range
and step/interval size. Subsequent stages use the best position from
the previous stage as the center of the search but use a reduced range
and interval size.
For example:
stage 1: Range +/- 64 interval 4
stage 2: Range +/- 32 interval 2
stage 3: Range +/- 15 interval 1
This process, especially when it follows on from a normal step
search, has shown itself to be almost as effective as a full range
exhaustive search with step 1 but greatly lowers the computational
complexity such that it can be used in some cases for speeds 0-2.
This patch also removes a double exhaustive search for sub 8x8 blocks
which also contained a bug (the two searches used different distortion
metrics).
For best quality in my test animation sequence this patch has almost
no impact on quality but improves encode speed by more than 5X.
Restricted use in good quality speeds 0-2 yields significant quality gains
on the animation test of 0.2 - 0.5 db with only a small impact on encode
speed. On most clips though the quality gain and speed impact are small.
Change-Id: Id22967a840e996e1db273f6ac4ff03f4f52d49aa
This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I6c2791d43022822a9e6ab43cd124a773946d0bdc
This reverts commit f1342a7b07.
This breaks 32-bit builds:
runtime error: load of misaligned address 0xf72fdd48 for type 'const
__m128i' (vector of 2 'long long' values), which requires 16 byte
alignment
+ _mm_set1_epi64x is incompatible with some versions of visual studio
Change-Id: I6f6fc3c11403344cef78d1c432cdc9147e5c1673
This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I184055b864c5a2dc37b2d8c5c9012eb801e9daf6
Source noise level estimate is also useful for
setting variance encoder parameters (variance thresholds,
qp-delta, mode selection, etc), so allow it to be used also
if denoising is not on.
Change-Id: I4fe23d47607b4e17a35287057f489c29114beed1
Periodically estiamte noise level in source, and only denoise
if estimated noise level is above threshold.
Change-Id: I54f967b3003b0c14d0b1d3dc83cb82ce8cc2d381
Use the existing VP9_SET_SVC control to set the
first spatial layer to encode.
Since we loop over all spatial layers inside the encoder, the
setting of spatial_layer_id via VP9_SET_SVC has no relevance.
Use it instead to set the first_spatial_layer_to_encode,
which allows an application to skip encoding lower layer(s).
Change only affects the 1 pass CBR SVC.
Change-Id: I5d63ab713c3e250fdf42c637f38d5ec8f60cd1fb
Temporary fix to denoiser when dynamic resizing is on.
-Reallocate denoiser buffers on resized frame.
-Force golden update on resized frame.
-Don't denoise resized frame, and copy source into denoised buffers.
Change-Id: Ife7638173b76a1c49eac7da4f2a30c9c1f4e2000
Dynamic resizing now support two-steps scaling: first go down to
3/4 and then 1/2. This feature is under a flag which controls the
switch between two-steps scaling and one-step scaling (1/2 only).
Change-Id: I3a6c1d3d5668cf8e016a0a02aeca737565604a0f
The loopfilter masks are now built in the decode loop.
This is done so we can eventually reduce the number of
MODE_INFO structs required by the decoder.
The encoder builds the masks for the entire frame prior
to calling the loopfilter.
Change-Id: Ia2146b07e0acb8c50203e586dfae0c4c5b316f11
In the decoder, map this to the output variable vpx_image_t.r_w/h.
This is intended as an improved version of VP9D_GET_DISPLAY_SIZE,
which doesn't work with parallel frame decoding. In the encoder,
map this to a codec control func (VP9E_SET_RENDER_SIZE) that takes
a w/h pair argument in a int[2] (identical to VP9D_GET_DISPLAY_SIZE).
Also add render_size to the encoder_param_get_to_decoder unit test.
See issue 1030.
Change-Id: I12124c13602d832bf4c44090db08c1009c94c7e8
The name "display_*" (or "d_*") is used for non-compatible information
(that is, the cropped frame dimensions in pixels, as opposed to the
intended screen rendering surface size). Therefore, continuing to use
display_* would be confusing to end users. Instead, rename the field
to render_*, so that struct vpx_image can include it.
Change-Id: Iab8d2eae96492b71c4ea60c4bce8121cb2a1fe2d
Reallocation of mi buffer fails if change size on the first frame and
change config in subsequent frames. Add a condition for resolution
check to avoid assertion failure.
BUG=1074
Change-Id: Ie26ed816a57fa871ba27a72db9805baaaeaba9f3
In decoder, export (eventually) into vpx_image_t.range field. In
encoder, use oxcf->color_range to set it (same way as for
color_space).
See issue 1059.
Change-Id: Ieabbb2a785fa58cc4044bd54eee66f328f3906ce
For 1 pass CBR spatial-SVC:
Add cyclic refresh parameters to the svc-layer context.
This allows cyclic refresh (aq-mode=3) to be applied to
the whole super-frame (all spatial layers).
This gives a performance improvement for spatial layer encoding.
Addd the aq_mode mode on/off setting as command line option.
Change-Id: Ib9c3b5ba3cb7851bfb8c37d4f911664bef38e165
The normative (convolve8) filter is optimized/faster than
the nonnormative one. Pass usage of scaler (normative/nonomorative)
to vp9_scale_if_required(), and always use normative one for 1 pass.
Change-Id: I2b71d9ff18b3c7499b058d1325a9554de993dd52
