Tests resolutions of 8, 10, 16, 18, 32, 34, 64, 66 to exercise the
border conditions, as well as non-SB aligned sizes.
Change-Id: Ie7c2b7860ac3727e23202042f2e86792652912f8
This allows code calling the library can choose an arbitrary
encryption algorithm.
Decoder control parameter VP8_SET_DECRYPT_KEY is renamed to
VP8D_SET_DECRYPTOR, and now takes an small config struct instead
of just a byte array.
Change-Id: I0462b3388d8d45057e4f79a6b6777fe713dc546e
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
These files can stand in until we get proper syntax vectors. They
should provide some additional assurance against inadvertant
bitstream changes.
Change-Id: I12f6c9a5f054e30df40a7ff1f33145abf7e1d59d
No bitstream change.
Removes unused filters and the code for the case of 2 switchable filters;
also changes the 8tap-smooth filter coefficients for integer shifts to be
interpolating to be consistent with the way it is implemented currently.
Change-Id: I96c542fd8c06f4e0df507a645976f58e6de92aae
The partition types of blocks sitting on the frame boundary are
constrained by the block size and the position of each sub-block
relative to the frame. Hence we use truncated probability models
to handle the coding of such information.
100 frames run:
yt 0.138%
Change-Id: I85d9b45665c15280069c0234ea6f778af586d87d
This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.
Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I296604bf73579c45105de0dd1adbcc91bcc53c22
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iacfd57324fbe2b7beca5d7f3dcae25c976e67f45
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iea7976b22b1927d24b8004d2a3fddae7ecca3ba1
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I4ea09df0e162591e420d869b7431c2e7f89a8c1a
Code was previously using VPX_IMG_FMT_VPXI420, which was intended to be the
"vpx" non-YUV colorspace variant.
Change-Id: Icf8771eeefeb574055ed638a93450c3d0ed5b9f5
Disables the part of the error-resilient test that tests the
quality after dropping undroppable frames. It's not clear how
to set the threshold for this correctly at the moment.
Change-Id: I3ee4a0d475498f44711fdef05749f305e8d08591
This reverts commit b24735c622
since the adjusted threshold doesn't allow the existing tests
to pass. Will disable the failing test in a separate commit.
Change-Id: I26d41cf6175f300bbad493cecdc96e6b0dd6f2fe
input_ is filled with random values just afterward.
the size was wrong anyway as input_ is allocated with memalign so
sizeof(input_)==sizeof(uint8_t*)
Change-Id: I014b832ac60960cd22b6f369dbc9fd648d4055b5
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
Updates the common convoloution code to support blocks larger than
16x16, and rectangular blocks. This uncovered a bug in the SSSE3
filtering routines due to the order of application of saturation.
This commit fixes that bug, adjusts the unit test to bias its
random values towards the extremes, and adds a test to ensure that
all filters conform to the expected pairwise addition structure.
Change-Id: I81f69668b1de0de5a8ed43f0643845641525c8f0
This is the first CL with vp9_reader changes. All another macro
definitions will be replaced after.
Change-Id: I1c6bd9c9a612ec1663d484d6adb4fb720af54063
the one from gtest in this case: testing::internal::Random.
this will make the tests deterministic between platforms. addresses
issue #568.
Change-Id: I5a8a92f5c33f52cb0a219c1dd3d02335acbbf163
Pick up VP8 encryption, quantization changes, and some fixes to vpxenc
Conflicts:
test/decode_test_driver.cc
test/decode_test_driver.h
test/encode_test_driver.cc
vp8/vp8cx.mk
vpxdec.c
vpxenc.c
Change-Id: I9fbcc64808ead47e22f1f22501965cc7f0c4791c
The superframe index marker byte carries data in the lower 5 bits. Only the
upper 3 should be used as part of the mask to detect it. By masking with
0xf0, the previous code was incorrect for frames over 65k bytes.
Change-Id: I6248889f5af227457f359a56b2348ef6db87a3b4
Improved coding performance made this test fail. Adjust the threshold
so that it passes again. A more stable metric is an open TODO.
Change-Id: I56e18749ced48123ee2488888a3eed631759912b
A 'superframe' is a group of frames that share the same PTS, but have a
defined decoding order. This commit adds the ability to append an index
to such a group of frames, allowing for random access to the constituent
frames. This could be useful for frame-level parallelism or partial
decoding in a multilayer scenario.
Decoding the stream serially without such an index should work as a
fallback, and VP9/TestSuperframeIndexIsOptional verifies that.
Change-Id: Idff83b7560e1a7077d8fb067bfbc45b567e78b1c
Since the 8-tap lowpass filter is non-interpolating, the results are
different between applying it at whole-pel values and not. This
means that 1D-only versions are requried to be implemented, as
opposed to being an optimization of the 2D case. Calling the 2D
filter instead of the horizontal-only filter is not equivalent
in this case. Update the test to pass invalid filters to the
unused stage of the 1D-only calls, to verify they're unused.
Change-Id: Idc1c490f059adadd4cc80dbe770c1ccefe628b0a
Updates the convolve test to verify that all filters match the
reference implementation. This verifies commit 30f866f, which
fixed some problems with the SSE3 version of the filters for
the vp9_sub_pel_filters_8s and vp9_sub_pel_filters_8lp banks
due to overflow and order of operations.
Change-Id: I6b5fe1a41bc20062e2e64633b1355ae58c9c592c
Fixes a bug in vp9_set_internal_size() that prevented returning to
the unscaled state. Updated the ResizeInternalTest to scale both
down and up. Added a check that all frames are within 2.5% of the
quality of the initial keyframe.
Change-Id: I3b7ef17cdac144ed05b9148dce6badfa75cff5c8
This avoids duplicating all the filters twice. Includes fixups to the
convolve routines and associated tests to make this work.
Change-Id: I922f86021594e55072ddb63b42b2313605db6e00
This patch allows coding frames using references of different
resolution, in ZEROMV mode. For compound prediction, either
reference may be scaled.
To test, I use the resize_test and enable WRITE_RECON_BUFFER
in vp9_onyxd_if.c. It's also useful to apply this patch to
test/i420_video_source.h:
--- a/test/i420_video_source.h
+++ b/test/i420_video_source.h
@@ -93,6 +93,7 @@ class I420VideoSource : public VideoSource {
virtual void FillFrame() {
// Read a frame from input_file.
+ if (frame_ != 3)
if (fread(img_->img_data, raw_sz_, 1, input_file_) == 0) {
limit_ = frame_;
}
This forces the frame that the resolution changes on to be coded
with no motion, only scaling, and improves the quality of the
result.
Change-Id: I1ee75d19a437ff801192f767fd02a36bcbd1d496
Ensure that all inter prediction goes through a common code path
that takes scaling into account. Removes a bunch of duplicate
1st/2nd predictor code. Also introduces a 16x8 mode for 8x8
MVs, similar to the 8x4 trick we were doing before. This has an
unexpected effect with EIGHTTAP_SMOOTH, so it's disabled in that
case for now.
Change-Id: Ia053e823a8bc616a988a0af30452e1e75a739cba
Also
1. Removed the test code for fDCT from the iDCT test.
2. changed the criteria of round trip error to be below 1/block, this
is quite strict comparing to smaller transforms when size differences
are accounted for.
Change-Id: Idb46a6380b04c93fc8e2845c75f5a850366b0090
This commit added pre/post scaling for first half of fDCT16x16 to
reduce error, by simulation of 100,000 blocks for random inputs,
the average sse reduced from 2.1/block to 0.0498/block.
also enabled tests for 16x16 fDCT and iDCT
Change-Id: Id2a95f0464c6dd4118797d456237ae90274c0f02
The commit added a final rounding choice for 8x8 forward dct to get
rid of a sign bias at DC position and improve the accuracry in term
of round trip error for 8x8 fDCT/iDCT.
This commit also enabled forward 8x8 dct test.
Change-Id: Ib67f99b0a24d513e230c7812bc04569d472fdc50
1. changed 4x4 test name to Vp9Fdct4x4Test to be consistent
2. remove forward 8x8 dct test code from idct8x8_test.cc
3. temporarily disable other forward dct tests to allow fdct work in
progress
Change-Id: I566aeed9c7c34da5a206190aa7d0e847a4008b36
This is after discussion with the hardware team. Update the unit test
to take these sizes into account. Split out some duplicate code into
a separate file so it can be shared.
Change-Id: I8311d11b0191d8bb37e8eb4ac962beb217e1bff5
* changes:
Initial support for resolution changes on P-frames
Avoid allocating memory when resizing frames
Adds a test for the VP8E_SET_SCALEMODE control
Tests that the external interface to set the internal codec scaling
works as expected. Also updates the test to pull the height from
the decoded frame size rather than parsing the keyframe header,
in anticipation of allowing resolution changes on non-keyframes.
Change-Id: I3ed92117d8e5288fbbd1e7b618f2f233d0fe2c17
This commit adds the 8 tap SSSE3 subpixel filters back into the code
underneath the convolve API. The C code is still called for 4x4
blocks, as well as compound prediction modes. This restores the
encode performance to be within about 8% of the baseline.
Change-Id: Ife0d81477075ae33c05b53c65003951efdc8b09c
This patch adds column-based tiling. The idea is to make each tile
independently decodable (after reading the common frame header) and
also independendly encodable (minus within-frame cost adjustments in
the RD loop) to speed-up hardware & software en/decoders if they used
multi-threading. Column-based tiling has the added advantage (over
other tiling methods) that it minimizes realtime use-case latency,
since all threads can start encoding data as soon as the first SB-row
worth of data is available to the encoder.
There is some test code that does random tile ordering in the decoder,
to confirm that each tile is indeed independently decodable from other
tiles in the same frame. At tile edges, all contexts assume default
values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode),
and motion vector search and ordering do not cross tiles in the same
frame.
t log
Tile independence is not maintained between frames ATM, i.e. tile 0 of
frame 1 is free to use motion vectors that point into any tile of frame
0. We support 1 (i.e. no tiling), 2 or 4 column-tiles.
The loopfilter crosses tile boundaries. I discussed this briefly with Aki
and he says that's OK. An in-loop loopfilter would need to do some sync
between tile threads, but that shouldn't be a big issue.
Resuls: with tiling disabled, we go up slightly because of improved edge
use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf,
~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5%
on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is
concentrated in the low-bitrate end of clips, and most of it is because
of the loss of edges at tile boundaries and the resulting loss of intra
predictors.
TODO:
- more tiles (perhaps allow row-based tiling also, and max. 8 tiles)?
- maybe optionally (for EC purposes), motion vectors themselves
should not cross tile edges, or we should emulate such borders as
if they were off-frame, to limit error propagation to within one
tile only. This doesn't have to be the default behaviour but could
be an optional bitstream flag.
Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
This commit introduces a new convolution function which will be used to
replace the existing subpixel interpolation functions. It is much the
same as the existing functions, but allows for changing the filter
kernel on a per-pixel basis, and doesn't bake in knowledge of the
filter to be applied or the size of the resulting block into the
function name.
Replacing the existing subpel filters will come in a later commit.
Change-Id: Ic9a5615f2f456cb77f96741856fc650d6d78bb91
Adds an error-resilient mode where frames can be continued
to be decoded even when there are errors (due to network losses)
on a prior frame. Specifically, backward updates are turned off
and probabilities of various symbols are reset to defaults at
the beginning of each frame. Further, the last frame's mvs are
not used for the mv reference list, and the sorting of the
initial list based on search on previous frames is turned off
as well.
Also adds a test where an arbitrary set of frames are skipped
from decoding to simulate errors. The test verifies (1) that if
the error frames are droppable - i.e. frame buffer updates have
been turned off - there are no mismatch errors for the remaining
frames after the error frames; and (2) if the error-frames are non
droppable, there are not only no decoding errors but the mismatch
PSNR between the decoder's version of the post-error frames and the
encoder's version is at least 20 dB.
Change-Id: Ie6e2bcd436b1e8643270356d3a930e8989ff52a5
This commit starts to convert the tests to a system where the codec
to be used is provided by a factory object. Currently no tests are
instantiated for VP9 since they all fail for various reasons, but it
was verified that they're called and the correct codec is
instantiated.
Change-Id: Ia7506df2ca3a7651218ba3ca560634f08c9fbdeb
Various fixups to resolve issues when building vp9-preview under the more stringent
checks placed on the experimental branch.
Change-Id: I21749de83552e1e75c799003f849e6a0f1a35b07
In addition to allowing tests to use the RTCD-enabled functions (perhaps transitively)
without having run a full encode/decode test yet, this fixes a linking issue with
Apple's G++ whereby the Common symbols (the function pointers themselves) wouldn't
be resolved. Fixing this linking issue is the primary impetus for this patch, as none
of the tests exercise the RTCD functionality except through the main API.
Change-Id: I12aed91ca37a707e5309aa6cb9c38a649c06bc6a
This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds
code all over the place to wrap that in the bitstream/encoder/decoder/RD.
Some implementation notes (these probably need careful review):
- token range is extended by 1 bit, since the value range out of this
transform is [-16384,16383].
- the coefficients coming out of the FDCT are manually scaled back by
1 bit, or else they won't fit in int16_t (they are 17 bits). Because
of this, the RD error scoring does not right-shift the MSE score by
two (unlike for 4x4/8x8/16x16).
- to compensate for this loss in precision, the quantizer is halved
also. This is currently a little hacky.
- FDCT and IDCT is double-only right now. Needs a fixed-point impl.
- There are no default probabilities for the 32x32 transform yet; I'm
simply using the 16x16 luma ones. A future commit will add newly
generated probabilities for all transforms.
- No ADST version. I don't think we'll add one for this level; if an
ADST is desired, transform-size selection can scale back to 16x16
or lower, and use an ADST at that level.
Additional notes specific to Debargha's DWT/DCT hybrid:
- coefficient scale is different for the top/left 16x16 (DCT-over-DWT)
block than for the rest (DWT pixel differences) of the block. Therefore,
RD error scoring isn't easily scalable between coefficient and pixel
domain. Thus, unfortunately, we need to compute the RD distortion in
the pixel domain until we figure out how to scale these appropriately.
Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
In addition to allowing tests to use the RTCD-enabled functions (perhaps transitively)
without having run a full encode/decode test yet, this fixes a linking issue with
Apple's G++ whereby the Common symbols (the function pointers themselves) wouldn't
be resolved. Fixing this linking issue is the primary impetus for this patch, as none
of the tests exercise the RTCD functionality except through the main API.
Change-Id: I12aed91ca37a707e5309aa6cb9c38a649c06bc6a
Support for gyp which doesn't support multiple objects in the same
static library having the same basename.
Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc
Rather than building an object file directory heirarchy matching the
source tree's layout, rename the object files so that the object
file name contains the path in the source file tree. The intent here
is to allow two files in different parts of the source tree to have
the same name and still not collide when put into an ar archive.
Change-Id: Id627737dc95ffc65b738501215f34a995148c5a2
