--rt --cpu-used=-5 uses the progressive rtc mode
--rt --cpu-used=-6 uses the new super fast rtc mode
Change-Id: Id6469ca996100cdf794a0e42d76430161f22f976
* Avoid unnecessary type erasure
* Prune unused/duplicate fields from struct rdcost_block_args
* Make struct rdcost_block_args a local
Change-Id: I4f1fd4837ccd028bbfe727191ee8d69f0463b7e5
This patch only works if the video is a width and height that are both
a multiple of 32.. It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame. It always does
does the largest possible transform, and loop filter level is set to 4.
Was ~20% faster than speed -5 of vp8
Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv
The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.
Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7
SSE for a 64x64 block with 3 planes can go as high as 3*2^28. So left
shift by 4 may overflow 32 bit int.
Change-Id: I63c84aa56894788bb987299badabbd7cc6fd0be6
The affect on quality was minimal. Less than .1%, various sets
yt ( +.15%), derf (-.1%), hd ( -.1% ), std hd(-.15%)...
The affect on speed of encode at speed -5 was substantial ( ~3% ).
Change-Id: I8903346fbae0c35f5b9ea20f81fdd239ae81247d
This commit setups a test framework for real-time coding. It enables
a light motion search for non-RD mode decision purpose.
Change-Id: I8bec656331539e963c2b685a70e43e0ae32a6e9d
Calculate the skip_coeff as part of the encode process, rather than
checking the eobs after the fact with another pass.
Change-Id: Ib41b139e96a97dee30e4b993b4cc53d86337128d
This funtion initializes buffer pointers and first stage motion vector
prediction. It will be needed by both regular rate-distortion
optimization loop and the non-RD mode decision. Hence move its
declaration in vp9_rdopt.h
Change-Id: I64e8b6316c9d05f20756a62721533a2e4d158235
This commit allows encoder to compare the SAD cost associated with
the best motion vector predictor, per frame. If one reference frame
has this cost more than 4 times of the best SAD cost given by other
reference frames, skip NEARESTMV, NEARMV, ZEROMV mode check of this
reference frame.
This setting is turned on in speed 2 and above. Compression quality
change in speed 2:
derf -0.014%
yt -0.097%
hd -0.023%
stdhd 0.046%
It reduces the speed 2 runtime of test sequences:
pedestrian_area_1080p 4000 kbps 310763 ms -> 303595 ms
bluesky_1080p 6000 kbps 259852 ms -> 251920 ms
Change-Id: I7f59cf79503d51836d61d56d50dc5bdf0e502e22
The previous implementation stops motion vector prediction test when
the zero motion vector appears for the second time. This commit fixes
it by simply skipping the second time check on zero mv and continuing
on to next mv candidate.
It slightly improves stdhd in speed 2 by 0.06% on average. Most static
sequences are not affected. A few hard ones, like jet, ped, and riverbed
were improved by 0.1 - 0.2%.
Change-Id: Ia8d4e2ffb7136669e8ad1fb24ea6e8fdd6b9a3c1
The feature undergoes prior assumption that the recursive partition
size search from 4x4 to 64x64, hence utilizing information from small
blocks to determine early termination in large block rate-distortion
optimization search. The current codebase is now going from top down.
The previous function might go with not properly initialized values,
hence removed.
Tested on pedestrian_area_1080p at 4000 kbps running under speed 2.
No visible difference in runtime observed.
Change-Id: I553df415c6191413762db7ae34e8790c71d8118e
Adding RefBuffer to simplify reference buffer management. The struct has a
pointer to image data and scale factors relative to the current frame.
Change-Id: If38eb1491ff687cc11428aee339f3e052e2c5d9e
This commit takes a preliminary attempt to refine the motion search
control. It detects the SAD associated with mv predictor per reference
frame, and based on which to determine whether the encoder wants to
reduce the motion search range (if the predicted mv provides fairly
small SAD), or to skip the current reference frame (if there exists
another ref frame that gives much smaller SAD cost).
This feature is turned on in the settings of speed 1 and above.
In speed 1, compression performance changed
derf -0.018%
yt -0.043%
hd -0.045%
stdhd -0.281%
speed-up
pedestrian_area_1080p at 4000 kbps 100 frames
199651ms -> 188846ms (5.5% speed-up)
blue_sky_1080p at 6000 kbps
443531ms -> 415239ms (6.3% speed-up)
In speed 2, compression performance changed
derf -0.026%
yt -0.090%
hd -0.055%
stdhd -0.210%
speed-up
pedstrian 113949ms -> 108855ms (4.5% speed-up)
blue_sky 271057ms -> 257322ms (5% speed-up)
Change-Id: I1b74ea28278c94fea329d971d706d573983d810d
Buffer the SSE of prediction residuals in the rate-distortion
optimization loop of a given block. This information would be used
for later encoding control.
Change-Id: If4e63f3462490513c48be9407d3327c8dd438367
Moving back to scale_factors struct. We don't need anymore x_offset_q4 and
y_offset_q4 because both values are calculated locally inside vp9_scale_mv
function.
Change-Id: I78a2122ba253c428a14558bda0e78ece738d2b5b
Before mv scaling it is required to calculate x_offset_q4/y_offset_q4
by calling set_scaled_offsets(). Now offset configuration can not be
missed because it happens just before scale_mv().
Change-Id: I7dd1a85b85811a6cc67c46c9b01e6ccbbb06ce3a
This commit reworks the prediction filter rate-distortion cost update
process consistent for all block sizes.
Change-Id: I5874349ab38df380240f96c2d4ef924072bab68d
Various cleanups and refactoring.
Removes feedback of active worst qaulity and uses last_q
instead to make the interface cleaner. Active worst quality
is now decided only once for a frame being coded in the
beginning based on last_q and other stats. Also, adds other
cleaups on last_q to store also the last_q for altref frames,
and reduces the altref interval a little.
The output does change a little.
derfraw300: +0.224% (global psnr)
stdhdraw250: +0.442% (global psnr)
Change-Id: Ie634cdc032697044c472dd0fe79c109b3e7f9767
Properly handle the rd_filter_cache update, when early termination
or skip prediction filter type check is triggered.
Change-Id: Ie7b9a75fed3358f45ffd15817f2b36670c14eb2d
This commit enables an adaptive prediction filter type selection
for sub8x8 block sizes. In speed 1, it re-uses the filter type of
collocated 8x8 block if it is tested in the rate-distortion optimization
loop, for the sub8x8 blocks. Otherwise, it runs the normal test
over all the three filter types. In speed 2, it re-uses the 8x8
block's prediction filter type, if available. Otherwise, force it
to be EIGHTTAP.
Compression and speed performance wise:
speed 1
derf -0.266%
yt -0.138%
bus at 2000 kbps: 33766ms -> 30451ms (10% speed-up)
football at 600 kbps: 48173ms -> 43786ms (9% speed-up)
speed 2
derf -0.026%
yt +0.134%
bus at 2000 kbps: 18973ms -> 17698ms (6% speed-up)
football at 600 kbps: 26748ms -> 25096ms (6% speed-up)
Change-Id: I77e097533b969fd3472147225fa79fc98095d342
This commit constrains the maximal motion search range for sub8x8
blocks to be [-1023, 1023], in the unit of full pixel.
Change-Id: I955b60649364ab410f2453cafd46a496f2fcb43e
Both single frame and compound inter motion search run with luma
component only. Hence removing the block size mapping therein.
Change-Id: I217488e702432ae9fa0e95bf6f516ebb36b5c79b
In the decoder we don't need to save eobs, we can pass eob as an argument.
That's why removing eob arrays from VP9Decompressor and TileWorkerData,
and moving eob pointer from macroblockd_plane to macroblock_plane.
Change-Id: I8eb919acc837acfb3abdd8319af63d1bbca8217a
Its last remaining caller can be passed its results directly without any
additional work. Also, it's not non-4:2:0 safe.
Change-Id: Ia5089ba5f7f66c7617270483c619c9271aefd868
This commit fixes the use of uv_intra_estimate by properly restoring
the mode_info struct required by rd_pick_intra_sbuv_mode.
Change-Id: I6a156d79533c4e2e60dfd3b8c5bb0a42a8eca280
We only need qcoeff buffers in the encoder. Reducing TileWorkerData struct
and VP9Decompressor struct sizes by 24K.
Change-Id: Id148868461f7ffa3d3dd634b371503ae9c57e207
There are many places in handle_inter_mode that need to restore the
dst buffer pointers, due to buffer pointer swap and early rd search
breakout. This commit wraps these operations into an inline function
for clean-up.
Change-Id: I0462e8c41c8bc3cd8db07395489cac03d8e5be54
Commit a4a5a210 enabled lossless coding, but the commit incorrectly
disabled the usage of skip in encoder even when skip should be used.
This commit make sure that skip is enabled even in lossless mode.
Change-Id: I276954f952c6ac68f17a316ebc72f09001228a08
Overall change (using dual buffer scheme for superblocks of both inter
and intra modes) reduces speed 2 runtime:
bluesky_1080p at 6000kbps: 263553ms -> 257441ms
riverbed_1080p at 8000kbps: 233230ms -> 225308ms.
Change-Id: Idf8d70f768a4b0d97b2a8506372c57b7b4022119
This commit enables the dual buffer rate-distortion optimization
and encoding scheme. It stacks the original transform coefficients,
quantized levels, and reconstructed coefficients, in the rate-
distortion optimization search process, hence eliminates the need
to re-run residual generation, forward transform, and quantization
in the encoding stage.
Change-Id: I011bfad3a59a380a869ee552e91dae0394ec492e
Allocate memory space of dual buffer sets that store the coeff, qcoeff,
dqcoeff, and eobs. Connect the pointers of macroblock_plane and
macroblockd_plane to the actual buffer in use accordingly.
Change-Id: I2f0b5f482ca879fae39095013eaf8901db20a5a4
This to make sure that prediction residue always get coded in lossless
mode.
This commit also fixed lossless unit test
Change-Id: I537726ee55328d4e4cf0a0196393a67e12bfcde1
Removing special case handling from vp9_tree_probs_from_distribution(),
tree_merge_probs(), and vp9_tokens_from_tree_offset() functions. Replacing
inter_mode_offset() function with macro INTER_OFFSET which is used now for
vp9_inter_mode_tree definition.
Change-Id: Iff75a1499d460beb949ece543389c8754deaf178
The compound inter prediction could potentially run with initial
motion vectors of invalid value and check the mv_cost, which triggers
overheap read. This commit resolves this issue by forcing a motion
vector value check for compound inter modes of both superblock and
sub8x8 block sizes.
Change-Id: I4f4fc19ce83c8272782bc382f12c82a3f03212fc
We only update partition_probs for inter frames but they are constant
for key frames. It is not necessary to have constants inside frame
context and copy them every time. This change reduces FRAME_CONTEXT size
by at least 48 bytes.
Change-Id: If70a53be51043f37fe7d113853217937710932a7
