This commit resolved a mis-alignment issue in compound inter-inter
prediction of sub8x8. This patch follows solution from dkovalev@.
Change-Id: I3cc0cf7e55b84110e0c42ef4b2e6ca7ac3f8f932
In subpel_avg_variance functions, code similar to the following
punpkldq m2, [addr]
actually reads 8 bytes. For functions that are supposed to work on
buffers only have less 8 bytes a line, this caused valgrind error
of reading uninitialized memory.
Change-Id: I2a4c079dbdbc747829bd9e2ed85f0018ad2a3a34
vp9_setup_interp_filters before each inter block decoding, it is not
necessary to call it just before the whole frame decoding.
Change-Id: Id1b0ee62f987474e27eafba0013a4896b492c400
Removing references to plane_block_width and plane_block_height (we are
going to delete the latter ones).
Change-Id: I7982da4d373aebb54d2209dc8886f6192df4d287
Make the current head working properly, while working on fixing an
issue in the SSSE3 implementation of 32x32 quantization.
Change-Id: Ic029da3fd7f1f5e58bc641341cbd226ec49a16bc
Previous change c4048dbd limits the mv search range assuming max block
size of 64x64, this commit change the search range using actual block
size instead.
Change-Id: Ibe07ab02b62bf64bd9f8675d2b997af20a2c7e11
We could avoid calling clamp_mv2 because it has been already called
inside vp9_find_best_ref_mvs function.
Change-Id: I08edeaf3e11e98c19e67b9711b2523ca5fb1416e
Fix of https://code.google.com/p/webm/issues/detail?id=608. We could have
used invalid display size equal to the previous frame size (not to the
current frame size).
Change-Id: I91b576be5032e47084214052a1990dc51213e2f0
Making code more compact, adding consts, removing redundant arguments,
adding do/while(0) for macros.
Change-Id: Ic9ec0bc58cee0910a5450b7fb8cfbf35fa9d0d16
To the source buffer to be encoded as an alt ref frame. This is to fix
the problem of using uninitialized memory in encoder.
See https://code.google.com/p/webm/issues/detail?id=605
Change-Id: I97618a2fc207e08abcf5301b734aa9e3ad695e2c
(In response to Issue 604:
https://code.google.com/p/webm/issues/detail?id=604)
There were bugs in the convolution code for two cases:
1. Where the filter table was assumed to be aligned to a
256 byte boundary. The offset of the pixel in the
source buffer was computed incorrectly.
2. Where no such alignment assumption was made. An
incorrect address for the filter table base was used.
To fix both problems, I now assume that the filter table is
256-byte aligned and modify the pixel offset calculation to
match.
A later patch should remove the restriction that the filter
table is aligned to a 256-byte boundary.
There was also a bug in the ConvolveTest unit test
(convolve_test.cc).
(Bug & initial fix suggestion submitted by Tero Rintaluoma
and Sami Pietilä).
Change-Id: I71985551e62846e55e40de9e7e3959d4805baa82
Values now carried over frame to frame.
Change to algorithm for decreasing threshold after
a hit and to max threshold (now based on speed)
Removed some old commented out code relating to
VP8 adaptive thresholds.
The impact of these changes tested on Akiyo (50 frames)
and measured in terms of unit rd hits is as follows:
Speed 0 84.36 -> 84.67
Speed 1 29.48 -> 22.22
Speed 2 11.76 -> 8.21
Speed 3 12.32 -> 7.21
Encode speed impact is broadly in line with these.
Change-Id: I5b886efee3077a11553fa950d796fd6d00c8cb19
Most of the focus so far has been on inter frames.
At high speed settings the key frame is now taking a high %
of the cycles.
This patch puts in some masking to reduce the number
of INTRA modes searched during key frame coding (as already
happens for inter frames) at higher speed settings
TODO: Develop this further with either adaptive rd thresholds
when choosing which intra modes to consider or some other
heuristic.
Impact.
At high speed settings on some clips the key frame was starting
to dominate. In a coding of the first 50 frames of AKIYO at speed
2 limiting the key frame intra modes to DC or TM_PRED resulted in
~30% overall speedup. For Bus the number was lower at ~4-5%.
Change-Id: I7bde68aee04995f9d9beb13a1902143112e341e2
Put rectangular partition check flag change according to the rd
costs of NONE and SPLIT partition types under the speed feature.
Change-Id: If681e1e078a8d43d86961ea4b748da5cd1b6c331
vp9_short_idct10_16x16_add is used to handle the block that only have valid data
at top left 4x4 block. All the other datas are 0. So we could cut many
unnecessary calculations in order to save instructions.
Change-Id: I6e30a3fee1ece5af7f258532416d0bfddd1143f0
It is possible to have invalid scale factors and not access them
during decoding. Error is reported if we really try to use invalid scale
factors.
Change-Id: Ie532d3ea7325ee0c7a6ada08269f804350c80fdf
Comment is wrong, we don't initialize any xd pointers. We only initialize
xd->planes[i]->dst and xd->planes[i]->pre[], which are actually initialized
for every block during the decoding.
Change-Id: If152ea872ebef1f83ca70712fa6f8df1b6855f56
remove duplicate allocation from vp9_create_compressor, it was added to
vp9_alloc_frame_buffers in:
d5bec52 Added resizing & initialization of last frame segment map
Change-Id: I996723226a16a62aff8f9a52ac74e0b73cc98fdf
This commit changes the partition search order of superblocks from
{SPLIT, NONE, HORZ, VERT} to {NONE, SPLIT, HORZ, VERT} for
consistency with that of sub8x8 partition search. It enable the use
of early termination in partition search for all block sizes.
For ped_area_1080p 50 frames coded at 4000 kbps, it makes the runtime
goes down from 844305ms -> 818003ms (3% speed-up) at speed 0.
This will further move towards making the in-search partition types
configurable, hence unifying various speed-up approaches.
Some speed 1 and 2 features are turned off during the refactoring
process, including:
disable_split_var_thresh
using_small_partition_info
Stricter constraints are applied to use_square_partition_only for
right/bottom boundary blocks. Will bring back/refine these features
subsequently. At this point, it makes derf set at speed 1 about
0.45% higher in compression performance, and 9% down in run-time.
Change-Id: I3db9f9d1d1a0d6cbe2e50e49bd9eda1cf705f37c
Adds a couple of minor fixes, which may be absorbed in Jingning's
patch. Thanks to Guillaume for pointing these out.
Also adjusts the thresholds for speed 1 and 2 to 16 and 32
respectively, to keep quality drops small.
Results:
--------
derfraw300: threshold = 16, psnr -0.082%, speedup 2-3%
threshold = 32, psnr -0.218%, speedup 5-6%
stdhdraw250: threshold = 16, psnr -0.031%, speedup 2-3%
threshold = 32, psnr -0.273%, speedup 5-6%
Change-Id: I4b11ae8296cca6c2a9f644be7e40de7c423b8330
It appears that the above/left mb_skip_coeff used during
the pick modes, is left over from the previously
encode frame. This patch initializes the flag to the default
value of zero.
Change-Id: Ida4684cc99611d6e3e82628db35ed717e28ce550
the final macroblock rows are scheduled in the main thread. prior to
this change one additional macroblock row would be scheduled in the
worker forcing the main thread to wait before finishing.
Change-Id: I05f3168e5c629b898fcebb0d77eb6d6a90d6105e
Currently, the best quality mode in VP9 is not very well developed,
and unnecessarily makes the encode too slow. Hence the command line
default is changed to "good" quality. Also, the number of passes
default is changed to 2 passes as well, since 1-pass encoding is
not very efficient in VP9.
Besides, a number of VP9 defaults are set to the currently
recommended settings. With these changes, vpxenc
run with --codec=vp9 --kf-max-dist=9999 --cpu-used=0 should
work about the same as our borg results.
Note when the --cpu-used=0 option is dropped there will be a slight
difference in the output, because of a difference in the cpu-used
value for the first pass. Specifically, the default when unspecified
is to use cpu_used=1 for the first pass and cpu_used=0 for the
second pass. But when specified, both passes will use the cpu-used
value specified.
Note that this also changes the default for VP8 as being "good"
but other options stay unchanged.
Change-Id: Ib23c1a05ae2f36ee076c0e34403efbda518c5066
Adding set_contexts contexts function and call it instead of
set_contexts_on_border. Calling txfrm_block_to_raster_xy to get aoff and
loff.
Change-Id: I41897e344afd2cae1f923f4fdbe63daccf6fe80e
Moving foreach_predicted_block_in_plane function to vp9_reconinter.c
because there is only one usage.
Change-Id: I9852feae43fc3cf809b817fc541d043bc5496209
Updating implementation of vp9_get_pred_context_single_ref_p2 using
has_second_ref function to make code easier to read.
Change-Id: I5ba642712f59861a48aab974e73aa01640d086fe
vp9_short_idct10_8x8_add is used to handle the block that only have valid data
at top left 4x4 block. All the other datas are 0. So we could cut several
unnecessary calculations in order to save instructions.
Change-Id: I34fda95e29082b789aded97c2df193991c2d9195
Check the minimum rate-distortion cost of regular quantization and
all zero coeffs cases in the sub8x8 inter prediction rd loop for
luma components. Use this as the cumulative rdcost sent to UV rd
estimation.
Change-Id: Ia4bc7700437d5e13d7cdad4cf9ae57ab036d3e97
Cleans up the switchable filter search logic. Also adds a
speed feature - a variance threshold - to disable filter search
if source variance is lower than this value.
Results: derfraw300
threshold = 16, psnr -0.238%, 4-5% speedup (tested on football)
threshold = 32, psnr -0.381%, 8-9% speedup (tested on football)
threshold = 64, psnr -0.611%, 12-13% speedup (tested on football)
threshold = 96, psnr -0.804%, 16-17% speedup (tested on football)
Based on these results, the threshold is chosen as 16 for speed 1,
32 for speed 2, 64 for speed 3 and 96 for speed 4.
Change-Id: Ib630d39192773b1983d3d349b97973768e170c04
Changes to code to auto select a partition size range
based on data from spatial neighbors.
Now looks at the sb_type in each 8x8 block of above
and left SB64.
The effect on speed 1 is now weaker giving better
quality but less speed gain. Now also used in speed 2.
Change-Id: Iace33a97d5c3498dd2a9a8a4067351941abcbabc
Updating implementation of vp9_get_pred_context_single_ref_p1 using
has_second_ref function to make code easier to read.
Change-Id: Ie8f60403a7195117ceb2c6c43176ca9a9e70b909
As the pixel values beyond image border are duplicates of pixels
on edge, the change limits the mv search range, any mv beyond
the limits no longer produce new/different prediction values
as entire block with pixels used for subpel interpolation are
outside image border.
Change-Id: I4c6fdf06e33c1cef1489f5470ce0fb4e5e01fb79
For certain partition size, the function poniter may not be intialized
at all. The patch prevent the call if the pointer is not set.
Change-Id: I78b8c3992b639e8799a16b3c74f0973d07b8b9ac
This commit enables early termination in the rate-distortion
optimization search loop for chroma components. When the cumulative
rd cost is above the current best value, skip the rest per-block
transform/quantization/coeff_cost and continue to the next
prediction mode.
For bus_cif at 2000 kbps, the average run-time goes down from
168546ms -> 164678ms, (2% speed-up) at speed 0
36197ms -> 34465ms, (4% speed-up) at speed 1
Change-Id: I9d3043864126e62bd0166250d66b3170d520b3c0
Updating all foreach_transformed_block_visitor functions to work with
plane block size instead of general block. Removing a lot of duplicated
code.
Change-Id: I6a9069e27528c611f5a648e1da0c5a5fd17f1bb4
This change set is intermediate. The next one will remove all repetitive
plane_bsize calculations, because it will be passed as argument to
foreach_transformed_block_visitor.
Change-Id: Ifc12e0b330e017c6851a28746b3a5460b9bf7f0b
The intent was to initialize the deltas for the
segment to the computed value, irrespective of mode
and reference frame if (mode_ref_delta_enabled == 0).
(In response to bug posted by Manjit Hota to codec-devel
and webm-discuss lists)
Change-Id: I10435cb63d0f88359bb4c14f22181878a1988e72
Return the distortion value in vp9_rd_pick_intra_mode_sb as sum of
dist_y and dist_uv. Remove the right shift operation on dist_uv,
and make it consistent with that of vp9_rd_pick_inter_mode_sb.
Change-Id: I9d564e242d9add38e32595d33b0e0dddb1d55e5b
When the frame size changes the last frame segment map must
be resized to match and initialized to 0.
Change-Id: Idc10de109f55dbe9af3a6caae355a2974712243d
This commit makes the rate-distortion optimization search of chroma
components consistent across all block sizes. It removes redundant
codes.
Change-Id: I7e76f54d045e8efdd41d84a164c71f55b484471b
VP9_COMMON is the right place to segmentatation struct because it has
global segmentation parameters, not something specific to macroblock
processing.
Change-Id: Ib9ada0c06c253996eb3b5f6cccf6a323fbbba708
Adds a speed feature to disable split partition search based on a
given threshold on the source variance. A tighter threshold derived
from the threshold provided is used to also disable horizontal and
vertical partitions.
Results on derfraw300:
threshold = 16, psnr = -0.057%, speedup ~1% (football)
threshold = 32, psnr = -0.150%, speedup ~4-5% (football)
threshold = 64, psnr = -0.570%, speedup ~10-12% (football)
Results on stdhdraw250:
threshold = 32, psnr = -0.18%, speedup is somewhat more than derf
because of a larger number of smoother blocks at higher resolution.
Based on these results, a threshold of 32 is chosen for speed 1,
and a threshold of 64 is chosen for speeds 2 and above.
Change-Id: If08912fb6c67fd4242d12a0d094783a99f52f6c6
This commit unifies the rate-distortion cost calculation process of
luma and chroma components. It allows early termination to be enabled
later in the rd search loop of chroma components, in consistent with
luma pixels.
Change-Id: I2e52a7c6496176bf2a5e3ef338d34ceb8aad9b3d
