This commit reformats non-RD coding flow layout to allow mode
decision with fixed and variable block sizes.
Change-Id: I2cdd3bb9f26c499ee4a9849004fd925cdd195d09
The flag x->skip_recode interacts badly with
the cpi->sf.use_nonrd_pick_mode and
cpi->sf.skip_encode_sb speed settings.
Restricting the use of the skip_decode flag when
these other speed choices are in use helps quality
for speeds 3 and 4 by a large amount with only a
small impact on speed.
Average improvmentes for 2 pass speed 4:
Derf +8.8%
Yt + 10.53%
Std-Hd +6.95%
yt-hd + 22.95%
Change-Id: I8010876d8012042a11077c92e69d813c3dfa58eb
This is an initial attempt to allow variable block size partition
in non-RD coding flow. It tests 8x8, 16x16 and 32x32 block size per
64x64 block, all using non-RD mode decision and the associated rate
distortion costs from modeling, then selects the best block size to
encode the entire 64x64 block. Such operations are triggered every
other 3 frames. The blocks of intermediate frames will reuse the
collocated block's partition type.
It improves the compression performance by 13.2%. Note that the gains
are not evenly distributed. For many hard clips, the compression
performance is improved by 20% to 28%. Local speed test shows that
it will also increase runtime by 50%, as compared to speed -7. It is
now enabled in speed -6 setting.
Change-Id: Ib4fb8659d21621c9075b3c369ddaa9ecb0a4b204
The use of uninitialized skip flag will trigger inconsistency in
coding statistics, when alternate RD and non-RD coding modes are
enabled. This commit fixes this issue and removes unnecessary if
statements from update_state_rt.
Change-Id: I7d549dcb0e3ef48b999e5bbc78174ba84502cfcf
The block coding skip flags are assigned in the normal RD mode
decision loop. They are then used in the final encoding stage.
In the non-RD mode decision, the forward transform and quantization
stages are replaced by modeling based on SSE and variance of
prediction residues. This commit applies reset to this array in
the non-RD coding mode.
Change-Id: I66584669b035e9c8ac23e95047849ff277472742
This commit moves the position where rdmult is saved to make sure it
is the correct value. Prior, an uninitialized value may be saved and
restored.
This addresses issue:
https://code.google.com/p/webm/issues/detail?id=733
Change-Id: I436407f289169bc63da3c5a6bf609bed16cb71b5
This commit unifies the non-RD partition use cases for both fixed
and variable block sizes. Deprecate and remove the separate function
for fixed partition type only.
Change-Id: I2b6cb945e90c1566f985adcebc4d0757480a8004
Brings back most of Jim's previous patch for choosing
partitioning based on variance while making it compatible
with the current state of the code. Also adds a
nonrd_use_partition() function to recursively encode for any
arbitrary sb_type decisions within a 64x64 block; and
includes some refactoring.
Currently, when the VAR_BASED_PARTITIONING mode is turned on
for speed 7, there is a 10+% speed-up observed.
Experiments/improvements with this new partitioning method
will be conducted subsequently.
Change-Id: Ie6f43bfbde30583e941f450bf07c3b48828c9571
Clean-ups include
a. redundant code in rt -5 speed feature settings
b. code that guarantees square block availability in
rd_auto_partition_range()
Change-Id: Ic7b04d45b6dc15c461e0edbbb4e78aec20348291
This commit replaces SAD cost with modeled rate-distortion cost
for non-RD mode decision. It translates the prediction residual
SSE into estimate rate and reconstruction distorion costs, hence
capturing the quantization setting effect. The compression
performance of speed -7 for rtc set is improved by 14.79%.
Change-Id: Ifda014eb0501d13109fe7f92680bf1410b463632
Set speed features before running frame encoding. This avoids
redundant RD threshold calculation in key frame coding.
Change-Id: If8e3cf2c02976baa59b310c1c23af9eea0c46e36
Adds a speed 8 to VP9 where only the nearestmv (0 mv) is searched.
This seems to be about the same speed as vp8 speed 5.
Adds a new speed feature to disable inter modes based on a mask for
each blocksize.
Adds code for having lower complexity motion search methods
in nonrd pick mode function, even though speed 7 still uses DIAMOND
search for now.
Also uses HEX search for speed 6 rather than FAST_HEX which improves
psnr by 0.56% without any noticeable speed drop (tested on gipsmotion).
Change-Id: Ic13176572dbd3aed5884a26786940a4b1bbd8a75
For blocks at frame boundary, the selected block size sometimes needs
to be smaller than that was first given. This commit forces such block
size change only between square blocks, so as to avoid the potential
use case containing 32x16 + 16x8 + 16x8, for 1080p sequences.
Local test suggested no visible coding speed difference. Borg test
reveals no difference in terms of compression performance.
Change-Id: Ie8de87f3c6febc3acf11b4cbfdf2077f9f6def52
Instead of using source variance, this patch uses variance of the
frame difference between the source and the current frame to make
fixed size partition decisions. Also disables adjusting partitioning
if variance based or fixed size partitioning is used.
The latter change improves the speed substantially for speed 6, so
that speed 7 is now less than 3x the speed of speed 6. But speed
6 is 48% better in psnr on the rtc set compared to speed 7.
As compared to speed 5,
speed 6 is -37% in psnr at about 2.5x the speed,
speed 7 is -55% in psnr at about 7x the speed.
Change-Id: If61d80431d3e04ed304ac05832e773cdb2c0a578
Adds a method for determining a fixed size partition based on
variance of a 64x64 SB. This method is added to rtc speed 6.
Also fixes a bug in rtc_use_partition() and includes some
refactoring related to partitioning search, and some cosmetics.
Currently compared to speed 5, the coding efficiency of speed 6
is -19% and that of speed 7 is -55%, in cbr mode.
Change-Id: I057e04125a8b765906bb7d4bf7a36d1e575de7c6
The optimizer did something funny with the code around
line 1412. Before the call to encode_sb split_dist was
set properly but after it was adjusted and converted to
a negative.
https://code.google.com/p/webm/issues/detail?id=714
Change-Id: I9a7631d5325ade2dc28c1030653a23eecec8721b
If sf->disable_split_mask is DISABLE_ALL_SPLIT, disable
sf->adaptive_pred_interp_filter to avoid unnecessary operations.
Change-Id: Icb59174b2f4e9a3c3c16a696deb8018e5bd999eb
Moves the existing speed 6 to speed 7 and adds an
intermediate level 6 which is roughly in between
speeds 6 and 7 in both speed and coding efficiency.
Also includes some minor fixes/adjustments.
Change-Id: I98befc4d82d750e79fe426c457c4a2571f6b6cc7
This commit makes a refactoring of the rtc_use_partition. It allows
the encoder to take a preferred block size for non-RD mode decision.
The boundary blocks are handled such that smaller block sizes that
fit in the boundary size will be used instread.
In rtc mode, the coding performance of speed -6 for pedestrian_1080p
goes from
158980 b/f, 38.934 dB, 22721 ms to
159008 b/f, 40.064 dB, 23721 ms.
For rtc set, the speed -6 compression performance is improved by
26%. Still about 2dB behind speed -5 at this point.
Change-Id: If0944f0880eaf1ad340bc325d97cea8d0f9dd53f
In the first coding run of a 64x64 block, check the coding mode
for each 8x8 block. Will need a second annealing stage to decide
the partition size to be encoded.
Change-Id: Ida9417805ff3358979b0c0429d4099c023c88866
Run sub-pixel motion search when NEWMV gives lower rate-distortion
cost. This improves coding performance of derf set by 8%, std-hd by
2.2%.
Change-Id: Ife50f7fda8463927784fe59a41cc439c833e941a
Prior to this commit, both encoder and decoder reset mode/mv info from
previous frame in error resilient mode to ensure bitstreams are able to
decode when there is loss of frame in decoder side. However, this is
not necessary. This commit changed to remove the reset, so encoder can
continue to use mode/mv/partition information from previously encoded
frame without affecting decodeablilty under loss of frame.
Change-Id: I0279f862900dc647fb471ae3389770bb1b9f454f
In rtc coding mode, the encoder is running non-RD mode decision. It
does not need dual buffer swap as was the case in the RD mode. This
commit initializes the internal buffer pointers outside the block
coding loop for rtc mode.
Change-Id: Ie076705c60d6b7919217e3f1dfd49e7db5064ac2
The functionalities of set_offsets() are subsumed in later
set_partitioning() and rtc_use_partition() functions, hence removed.
Change-Id: Ie514b13cb66c2379f13d0be9b1da4c12ca4581e5
This function initializes the predictor buffer pointers and
calculates reference motion vectors. It is only needed in the settings
of inter frame coding. Hence removing it from the key frame coding
branch in rtc_use_partition.
Change-Id: Ic4e16c7467a5f32be4e0bf619ef9d57afb4a7075
This function is deprecated after the re-design of partition search
that runs big block size, then four-way split, followed by
rectangular block sizes. This commit removes the related functions.
Change-Id: I417549c8e0fa3cf35bd29816b805dd4e7c3660c6
The function rd_pick_reference_frame can be deprecated. Its use was
subsumed by the adaptive motion search control.
Change-Id: Icb0c2fa335f0f06fa7b79a71f972d9fa54d750db
In real time encoding, we enable encode_breakout to make encoding
fast. A speed feature "use_encode_breakout" is defined to set
encode_breakout thresholds for different speeds.
However, currently, static_thresh is an encoder option. The encode_
breakout can be turned off if user sets static_thresh=0 specifically.
The rtc set borg test result: (need to set --static_thresh=1)
speed -5, psnr loss -3.543%;
speed -4, psnr loss -2.358%;
speed -3, psnr loss -0.771%.
Encoding speed test:
speed -5, 11% - 60% speedup;
speed -4, 5.5% - 28% speedup;
speed -3, 0.8% - 7% speedup.
Change-Id: Icde592ffbe77eac7446f872a2e9eb2051733677b
Aq 1 only updates segment map on kf and arf and
only uses 3 segments. With these settings AQ1 is
+ for most clips in SSIM but negative in psnr.
However, the penalty in PSNR is much less than
previously.
Old version aq1 average results for std hd
-20.899% psnr, -5.809% SSIM
New version aq1 for std hd
-3.57% psnr, +1.23% SSIM
Aq2 Now uses only 2 segments and rd.
This mode is still slightly negative for most clips on
psnr and SSIM but seems to have a much bigger visual
impact on several problem clips than aq mode 1.
Old results for std hd:
-2.578% psnr, -1.151% SSIM
New results for std hd:
-1.561% psnr, -0.85% SSIM
Change-Id: I94f57f8a73121629ce598fb921aad761c1450e1c
Function encode_rtc_frame_internal() and encode_frame_internal() only
differed by a couple of speed features, this commit relocation those
difference into the setup of speed features and merged two functions
into one to remove duplication.
It also fixed a subtle bug super_fast_rtc was used before it was
initialized.
Change-Id: I234a5a1d11a4450930e5b4943dbab434208d5030
This commit added a logic to prevent the inter_filter type from being
changed if the default interp_filter mode is not switchable. Also, it
sets the default interp_filter to BILINEAR at very and super fast rtc
encoding modes
Change-Id: Ic41e6d31de29795a4ce536ec79afb01cab6daad3
--rt --cpu-used=-5 uses the progressive rtc mode
--rt --cpu-used=-6 uses the new super fast rtc mode
Change-Id: Id6469ca996100cdf794a0e42d76430161f22f976
In this new mode, the size range is strictly determined by the min
and max partition size in neighborhood blocks.
Niklas720 encoding time at cpu-used -5 goes from 56250ms to 50676ms,
a 10% reduction.
Change-Id: I316b0e2ac967ff3fad57b28d69c0ec80b7d8b34e
This patch only works if the video is a width and height that are both
a multiple of 32.. It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame. It always does
does the largest possible transform, and loop filter level is set to 4.
Was ~20% faster than speed -5 of vp8
Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv
The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.
Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7
This commit deprecates the use of best_mv from encoding and bit-stream
writing stages. It hence removes the definition from MACROBLOCKD.
Change-Id: I8e5302775a2aa4a18900726df407bff881f2dfb1
