Adding RefBuffer to simplify reference buffer management. The struct has a
pointer to image data and scale factors relative to the current frame.
Change-Id: If38eb1491ff687cc11428aee339f3e052e2c5d9e
Moving back to scale_factors struct. We don't need anymore x_offset_q4 and
y_offset_q4 because both values are calculated locally inside vp9_scale_mv
function.
Change-Id: I78a2122ba253c428a14558bda0e78ece738d2b5b
Various cleanups and refactoring.
Removes feedback of active worst qaulity and uses last_q
instead to make the interface cleaner. Active worst quality
is now decided only once for a frame being coded in the
beginning based on last_q and other stats. Also, adds other
cleaups on last_q to store also the last_q for altref frames,
and reduces the altref interval a little.
The output does change a little.
derfraw300: +0.224% (global psnr)
stdhdraw250: +0.442% (global psnr)
Change-Id: Ie634cdc032697044c472dd0fe79c109b3e7f9767
This commit enables an adaptive prediction filter type selection
for sub8x8 block sizes. In speed 1, it re-uses the filter type of
collocated 8x8 block if it is tested in the rate-distortion optimization
loop, for the sub8x8 blocks. Otherwise, it runs the normal test
over all the three filter types. In speed 2, it re-uses the 8x8
block's prediction filter type, if available. Otherwise, force it
to be EIGHTTAP.
Compression and speed performance wise:
speed 1
derf -0.266%
yt -0.138%
bus at 2000 kbps: 33766ms -> 30451ms (10% speed-up)
football at 600 kbps: 48173ms -> 43786ms (9% speed-up)
speed 2
derf -0.026%
yt +0.134%
bus at 2000 kbps: 18973ms -> 17698ms (6% speed-up)
football at 600 kbps: 26748ms -> 25096ms (6% speed-up)
Change-Id: I77e097533b969fd3472147225fa79fc98095d342
Trying to make encode_sb() more similar to write_modes_sb() and
decode_mode_sb() because essentially all branching logic should be the
same.
Change-Id: Ib7dec7b48fce29418142abad4d1dcfdb1c770735
In evaluating partition split case, Wrong partition size is used in
calling partition_plane_context(). This commit change to use the
correct sub partition size. The incorrect partition size used were
causing an ASAN error in unit test.
Change-Id: Iab695b764bc51cc61580075f2ae4001421132362
In lossless coding, distortion is always 0. Early exit based on this
metric was incorrect.
This CL also changed to use best_rd instead of distortion as the metric
for easly exit as requested by Jim.
Change-Id: I8ef3e407ac03b4abc3283b273f936a68fad5c2ab
In the decoder we don't need to save eobs, we can pass eob as an argument.
That's why removing eob arrays from VP9Decompressor and TileWorkerData,
and moving eob pointer from macroblockd_plane to macroblock_plane.
Change-Id: I8eb919acc837acfb3abdd8319af63d1bbca8217a
E.g. disable vertical partioning for 4:2:2. Until we come up with something
better to do with the chroma block size, this prevents an assert error.
Change-Id: I9394fb3f14ec1343abc3ad4769de208e6278f285
We only need qcoeff buffers in the encoder. Reducing TileWorkerData struct
and VP9Decompressor struct sizes by 24K.
Change-Id: Id148868461f7ffa3d3dd634b371503ae9c57e207
The idea here is to allow "in frame" adjustment of the final Q
value used to encode each SB64, using segmentation.
There is also adjustment of the rd mult in regions of overspend.
Activated using aq_mode=2
Change-Id: I2f140cd898c9f877c32cd6d2e667f5e11ada4b1c
This function is called from vp9_setup_past_independence() which is called
before the modified piece of code. Moving reset of inter_mode_probs into
vp9_init_mbmode_probs() for consistency.
Change-Id: Ib188e8798e1fbe15407fd501406761b746fdda95
Since they used in encoder only. This commit also re-order includes
for the files that include vp9_extend.h
Change-Id: I929fc113f2135d3198cd1fc6a17434e5a2f8a459
Overall change (using dual buffer scheme for superblocks of both inter
and intra modes) reduces speed 2 runtime:
bluesky_1080p at 6000kbps: 263553ms -> 257441ms
riverbed_1080p at 8000kbps: 233230ms -> 225308ms.
Change-Id: Idf8d70f768a4b0d97b2a8506372c57b7b4022119
This commit enables the dual buffer rate-distortion optimization
and encoding scheme. It stacks the original transform coefficients,
quantized levels, and reconstructed coefficients, in the rate-
distortion optimization search process, hence eliminates the need
to re-run residual generation, forward transform, and quantization
in the encoding stage.
Change-Id: I011bfad3a59a380a869ee552e91dae0394ec492e
Allocate memory space of dual buffer sets that store the coeff, qcoeff,
dqcoeff, and eobs. Connect the pointers of macroblock_plane and
macroblockd_plane to the actual buffer in use accordingly.
Change-Id: I2f0b5f482ca879fae39095013eaf8901db20a5a4
Removed three members from the VP9_COMP data structure:
inter_zz_count, gf_bad_count, gf_update_recommended.
These were part of the VP8 real-time mode implementation
that was removed from the initial VP9 codecbase.
Change-Id: I866b083b88ef02c74837277d50ce532ca88492f3
replaces use of cur_tile_mi_(row|col)_(start|end) by VP9_COMMON, making
it less stateful and more reusable for parallel tile decoding
Change-Id: I1df09382b4567a0e5f4434825d47c79afe2399be
update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding
Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed
For consistency with idct function names. Renames:
vp9_short_fdct4x4 -> vp9_fdct4x4
vp9_short_walsh4x4 -> vp9_fwht4x4
Change-Id: Id15497cc1270acca626447d846f0ce9199770f58
We used set_partition_seg_context() only before calls to:
1. update_partition_context()
2. partition_plane_context()
Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.
Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9
This commit makes the buffer allocation of zcoeff_blk array in
pick_mode_context block size aware. It calculates the number of
4x4 blocks in the partition and assigns the memory space accordingly.
This process (and the uninitialization) is done once for each encoding
pass. It allows memory copy of smaller buffer when possible.
For football at 600kbps, the runtimes improve by about 1%:
speed 1, 45961ms -> 45472ms
speed 2, 23863ms -> 23598ms
Change-Id: Id2ca24906fa89f46fa5fe742ec4b8efc2a61f877
That makes decoder and encoder (only bitstream writing part) a little bit
simpler and faster. Moving get_sb_index() function to the encoder.
Change-Id: Ie91aaeefd69c84b085948267b33556a7666c6278
The only case where they were intentionally pointing to different
structures was in mbgraph, and this didn't have the expected behavior
because both of these pointers are used interchangeably through the code
Change-Id: I979251782f90885fe962305bcc845bc05907f80c
This should be similar to what x264 does with --aq-mode 1.
It works well with clips like parkjoy and touhou
(http://x264.nl/developers/Dark_Shikari/LosslessTouhou.mkv).
At low bitrates, the segmentation signaling overhead may negate the
benefits of this feature.
(PGW) Default changed to feature OFF to allow provisional merge.
Change-Id: I938abf9bb487e1d4ad3b0264ea03d9826275c70b
Updated the encoder to handle frames that are coded
intra-only. Intra-only frames must be non-showable,
that is, the "show frame" flag must be set to 0 in
the frame header.
Tested by forcing the ARF frames to be coded intra-
only.
Note: The rate control code will need to be modified
to account for intra-only frames better than they
are currently handled.
Change-Id: I6a9dd5337deddcecc599d3a44a7431909ed21079
Remove the semicolon in the definition of vp9_zero macro. Make all
the use cases of vp9_zero of consistent format.
Change-Id: Ibaf9751e8595872b12766381a93d185a4d90df8f
Use b_mode_info to store the inter prediction mode of sub8x8 block,
in replacement of the use of partition_info. Remove redundant buffer
update for partition_info. For bus_cif at 2000 kbps, this seem to make
speed 0 about 1% faster.
Change-Id: Id1b3be45e75a24fb4b42335ac480c23e440978f6
We already have itxm_add member in MACROBLOCKD structure. Both
inv_txm4x4_1_add and inv_txm4x4_add are just its special cases for
different eob values. But eob logic is already implemented in
vp9_iwht4x4_add and vp9_idct4x4_add (that's why also removing
inverse_transform_b_4x4_add).
Change-Id: I80bec9b6f7d40c5e5033c613faca5c819c3e6326
The idea is to have the following names for each transform size:
vp9_idct4x4_add
vp9_idct4x4_1_add
vp9_idct4x4_10_add
vp9_idct4x4_16_add
vp9_idct8x8_add
vp9_idct8x8_1_add
vp9_idct8x8_10_add
vp9_idct8x8_64_add
etc for 16x16, 32x32
The actual list of renames in this patch:
vp9_idct_add_lossless -> vp9_iwht4x4_add
vp9_short_iwalsh4x4_add -> vp9_iwht4x4_16_add
vp9_short_iwalsh4x4_1_add -> vp9_iwht4x4_1_add
vp9_idct_add -> vp9_idct4x4_add
vp9_short_idct4x4_add -> vp9_idct4x4_16_add
vp9_short_idct4x4_1_add -> vp9_idct4x4_1_add
Change-Id: I6f43f7437c68dd30cdd05d72e213765578ed30b1
This commit separates the rate-distortion optimization loop of
superblocks from that of sub8x8 blocks. This allows better design
rate-distortion optimization search loop for each setting. It also
removes the use of SPLITMV and I4X4_PRED therein.
No performance change in speed 0 settings. For bus@CIF at 2000kbps,
the speed 1 runtime goes from 48009ms to 43894ms (about 10% faster).
The overall compression performance on derf changed by -0.021%.
Speed 2 runtime goes from 27114ms to 28700ms (6% slower), while the
overall coding efficiency goes up by 1.629% for derf, 1.236% for yt.
Change-Id: Ie6bdfa0a370148dd60bd800961077f7e97e67dd4
Substantial reworking of the speed vs quality trade offs for
speed 1 and 2.
In this patch I am attempting to freeze the "quality" meaning of
speeds 1 and 2 relative to speed 0 so that in future we can
better evaluate progress.
I am targeting :
Speed 1 quality ~-5% vs speed 0.
Speed 2 quality ~-10% vs speed 0
It is inevitable that quality will still fluctuate a little as we adjust
settings and add new features, but we will attempt to keep as
close as possible to these values. Above speed 2 things will remain
a bit more fluid for now.
In this patch speed 1 is approximately 4-5x as fast as speed 0. This
is similar to before but the quality hit is a lot less. Likewise speed 2
is approximately 2x as fast as speed 1 but is similar in quality to the
previous speed 1 configuration.
Also slight change to behavior of FLAG_EARLY_TERMINATE to insure
all reference frames get at least one rd test. Important for very low
variance regions.
WIP :- Added a new speed level with old speed 4 becoming speed 5.
Speed 3 and 4 tradeoffs still WIP
Change-Id: Ic7a38dd7b5b63ab1501f9352411972f480ac6264
This commit causes use last partition to consider whether a 64x64 has
motion that might make a new partitioning worth while.
Change-Id: I3a57bedef4f3cd961fadbfa96651c206fa36da4a
Make encoder skip rectangular partition check in speed 1 and above,
when early termination was triggered in partition split.
Thanks Guillaume (gmartres@) for catching this issue.
This change makes bus_cif at 2000kbps speed 1 runtime goes down from
25612ms to 23438ms (about 9% speed-up), at the expense of -0.235%
performance down.
Change-Id: I98613fad081a261d30d5fa206f934ca70601c180
The code now takes into account temporal and spatial
information to determine the partition size range, but the
frequency counts have been removed.
The net effect is similar in quality but about 10% faster.
Change-Id: I39a513fb79cec9177b73b2a7218f0da70963ae95
This patch deletes the variance based speed three partitioning.
Speed 3 now uses the same partitioning method as speed 2
but with some stricter conditions.
The speed and quality are now somewhere between speeds 2 and 4
whereas before it was worse in both than speed 4.
Change-Id: Ia142e7007299d79db3ceee6ca8670540db6f7a41
After change of MI context storage , mi_8x8[] pointer may be null for
a block outside of image border. The commit changes to access the data
only after validation of mi_row and mi_col.
Change-Id: I039c4eb486a228ea9d8e5f35ab9ae6717d718bf3
This commit enables forcing all coefficients zero per transformed
block, when its rate-distortion cost is lower than regular coeff
quantization.
The overall performance improvement (including its parent patch on
calculating rd cost per transformed block) at speed 1:
derf: 0.298%
yt: 0.452%
hd: 0.741%
stdhd: 0.006%
Change-Id: I66005fe0fd7af192c3eba32e02fd6d77952accb5
The commit added reset of pred_mv at the beginning of each SB64x64
partition mv search, also limited the usage of pred_mv only when
search on the largest partition is already done. This is to fix
a crash at speed 1/2 encoder where an invalid mv is used in mv
search.
Change-Id: I39010177da76d054e3c90b7899a44feb2e3a5b1b
This commit enables adaptive constraint on motion search range for
smaller partitions, given the motion vectors of collocated larger
partition as a candidate initial search point.
It makes speed 0 runtime of bus at CIF and 2000 kbps goes from
167s down to 162s (3% speed-up), at 0.01dB performance gains. In
the settings of speed 1, this makes the runtime goes from 33687 ms
to 32142 ms (4.5% speed-up), at 0.03dB performance gains.
Compression performance wise, it gains at speed 1:
derf 0.118%
yt 0.237%
hd 0.203%
stdhd 0.438%
Change-Id: Ic8b34c67810d9504a9579bef2825d3fa54b69454
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs. The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.
Change-Id: I031d376284c6eb98a38ad5595b797f048a6cfc0d
If the current obtained distortion is very small, which happens
for static image case, we pick the current partition type without
further split checking.
This won't affect regular videos. For static videos, we got 10%~12%
encoding speed gain. PSNR was better for some clips, and worse for
others. Overall it was even.
Change-Id: If787a57bedf46fc595ca4f5ded2b0c0a69e9fdef
A previous speed feature skipped modes not used in earlier
partitions but this not longer worked as intended following
changes to the partition coding order and in conjunction
with some other speed features (Especially speed 2 and above).
This modified mode skip feature sets a mask after the first X
modes have been tested in each partition depending on the
reference frame of the current best case.
This patch also makes some changes to the order modes are
tested to fit better with this skip functionality.
Initial testing suggests speed and rd hit count improvements
of up to 20% at speed 1. Quality results. (derf -1.9%, std hd +0.23%).
Change-Id: Idd8efa656cbc0c28f06d09690984c1f18b1115e1
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256
Speed 4 fixed partition size. Use fixed size unless it does not
fit inside image, in which case use the largest size that does.
Change-Id: I250f7a80506750dd82ab355721624a1344247223
Switching from mi_{width, height}_log2 and b_{width, height}_log2 to
num_8x8_blocks_{wide, high} and num_4x4_blocks_{wide, high}. Removing
redundant code, adding const.
Change-Id: Iaab2207590fd24d0b76999071778d1395dc5cd5d
Previous change c4048dbd limits the mv search range assuming max block
size of 64x64, this commit change the search range using actual block
size instead.
Change-Id: Ibe07ab02b62bf64bd9f8675d2b997af20a2c7e11
Put rectangular partition check flag change according to the rd
costs of NONE and SPLIT partition types under the speed feature.
Change-Id: If681e1e078a8d43d86961ea4b748da5cd1b6c331
This commit changes the partition search order of superblocks from
{SPLIT, NONE, HORZ, VERT} to {NONE, SPLIT, HORZ, VERT} for
consistency with that of sub8x8 partition search. It enable the use
of early termination in partition search for all block sizes.
For ped_area_1080p 50 frames coded at 4000 kbps, it makes the runtime
goes down from 844305ms -> 818003ms (3% speed-up) at speed 0.
This will further move towards making the in-search partition types
configurable, hence unifying various speed-up approaches.
Some speed 1 and 2 features are turned off during the refactoring
process, including:
disable_split_var_thresh
using_small_partition_info
Stricter constraints are applied to use_square_partition_only for
right/bottom boundary blocks. Will bring back/refine these features
subsequently. At this point, it makes derf set at speed 1 about
0.45% higher in compression performance, and 9% down in run-time.
Change-Id: I3db9f9d1d1a0d6cbe2e50e49bd9eda1cf705f37c
Adds a couple of minor fixes, which may be absorbed in Jingning's
patch. Thanks to Guillaume for pointing these out.
Also adjusts the thresholds for speed 1 and 2 to 16 and 32
respectively, to keep quality drops small.
Results:
--------
derfraw300: threshold = 16, psnr -0.082%, speedup 2-3%
threshold = 32, psnr -0.218%, speedup 5-6%
stdhdraw250: threshold = 16, psnr -0.031%, speedup 2-3%
threshold = 32, psnr -0.273%, speedup 5-6%
Change-Id: I4b11ae8296cca6c2a9f644be7e40de7c423b8330
It appears that the above/left mb_skip_coeff used during
the pick modes, is left over from the previously
encode frame. This patch initializes the flag to the default
value of zero.
Change-Id: Ida4684cc99611d6e3e82628db35ed717e28ce550
Changes to code to auto select a partition size range
based on data from spatial neighbors.
Now looks at the sb_type in each 8x8 block of above
and left SB64.
The effect on speed 1 is now weaker giving better
quality but less speed gain. Now also used in speed 2.
Change-Id: Iace33a97d5c3498dd2a9a8a4067351941abcbabc
As the pixel values beyond image border are duplicates of pixels
on edge, the change limits the mv search range, any mv beyond
the limits no longer produce new/different prediction values
as entire block with pixels used for subpel interpolation are
outside image border.
Change-Id: I4c6fdf06e33c1cef1489f5470ce0fb4e5e01fb79
VP9_COMMON is the right place to segmentatation struct because it has
global segmentation parameters, not something specific to macroblock
processing.
Change-Id: Ib9ada0c06c253996eb3b5f6cccf6a323fbbba708
Adds a speed feature to disable split partition search based on a
given threshold on the source variance. A tighter threshold derived
from the threshold provided is used to also disable horizontal and
vertical partitions.
Results on derfraw300:
threshold = 16, psnr = -0.057%, speedup ~1% (football)
threshold = 32, psnr = -0.150%, speedup ~4-5% (football)
threshold = 64, psnr = -0.570%, speedup ~10-12% (football)
Results on stdhdraw250:
threshold = 32, psnr = -0.18%, speedup is somewhat more than derf
because of a larger number of smoother blocks at higher resolution.
Based on these results, a threshold of 32 is chosen for speed 1,
and a threshold of 64 is chosen for speeds 2 and above.
Change-Id: If08912fb6c67fd4242d12a0d094783a99f52f6c6
The macro block mode info context originally contained an
entry for each 16x16 macroblock. In VP9 each entry refers
to an 8x8 region not a macro block, so the naming is misleading.
This first stage clean up changes the names of 3 entries in the
structure to remove the mb_ prefix.
TODO clean up the nomenclature more widely in respect of
mbmi and bmi.
Change-Id: Ia7305c6d0cb805dfe8cdc98dad21338f502e49c6
Don't do vertical or horizontal splits if subsize < min_partition_size,
except for edge blocks where it makes sense.
Change-Id: I479aa66ba1838d227b5de8312d46be184a8d6401
Loop filter configuration doesn't belong to macroblock, so moving it from
MACROBLOCKD to VP9_COMMON. Also moving the declaration of loopfilter struct
from vp9_blockd.h to vp9_loopfilter.h.
Change-Id: I4b3e34be9623b47cda35f9b1f9951f8c5b1d5d28
Different partitionings were not being evaluated against
best_rd and there were unnecessary calls to RDCOST. This
could have resulted in a non-optimal partioning being
selected.
I simplified the variables used to track the rate,
distortion and RD values throughout the function.
Change-Id: Ifa7085ee80d824e86791432a5bc6d8fea5a3e313
The low precision 32x32 fdct has all the intermediate steps within
16-bit depth, hence allowing faster SSE2 implementation, at the
expense of larger round-trip error. It was used in the rate-distortion
optimization search loop only.
Using the low precision version, in replace of the high precision one,
affects the compression performance by about 0.7% (derf, stdhd) at
speed 0. For speed 1, it makes derf set down by only 0.017%.
Change-Id: I4e7d18fac5bea5317b91c8e7dabae143bc6b5c8b
There was no benefit having this function. For example, inside
read_switchable_filter_type switchable filter context was calculated twice.
Change-Id: I79cd5bf95cbc0f6d8bf91a2e32289e01b18dcff1
Adds a speed feature to skip all intra modes other than
DC_PRED if the source variance is small. This feature is
made part of speed 1 and up.
Results on derf300: psnr -0.07%, speedup about 1-2%
Also uses the source variance to fine-tune the early
termination criteria when FLAG_EARLY_TERMINATE is on.
This feature is made part of speed 2 and up.
Results on derf300: psnr -0.52%, speedup about 5-7%
Change-Id: I59e38aa836557cfa5405ae706fc64815cbfe4232
This changeset allows to remove vp9_switchable_interp and
vp9_switchable_interp_map arrays and make code much clear. Actually we
still have to use these mapping but only inside read_interp_filter_type and
write_interp_filter_type functions.
Change-Id: I4026c6f8c4acefba6c81421b7bacbaa52cc45f50
Adds a function to compute source variance for various
sb_types to be used for pruning mode and partition searches.
[The existing activity measure function is currently specialized
for only 16x16 MBs and needs to be updated].
Change-Id: I22a41e6f1430184201487326fdbebb9b47e6fc24
If the partition is out of partition size range, we don't
need to process small partition information.
Change-Id: Ice9bfbbdebe1f2ef79271a3aee17de0ed4608376
use_min_partition_size and use_max_partition_size are not used
currently, and could be added back if needed later.
Change-Id: Ib22a9c06b064567a7c1d6d5445567ed77e0d3acc
This commit removes redundant arguments passing in the function of
rd_pick_reference_frame. This resolves the clang warnings about
potential use of uninitialized values.
Change-Id: Ic68f949a9f8fcd0a583786b0c75321104ea44739
Refactor the frame buffer referencing in choose_partition and make
it consistent with other places. This means to prevent potential
issues when we extend reference frame buffer.
Change-Id: I5ff33ed5f671e1f4cc7049622212769a9b4578d9
Speed feature experiment to set an upper and lower
partition size limit based on what has been seen
in spatial neighbors.
This seems to gives quite reasonable speed gains in local
(10-15%) and when used with speed 0 the losses are small
(0.25% derf, 0.35% stdhd). However, for now I am only
enabling it on speed 1 as there may be clashes with the existing
temporal partition selection in speed 2.
Using a tighter min / max around the range derived from the
neighbors increases speed further but at the cost of a
bigger quality loss. However, I think this spatial method could
be combined with data from either the last frame or a variance
method (or both) to refine the range of minimum and maximum
partition size. I.e. consider the min and max from spatial and
temporal neighbors and the variance recommendation.
Change-Id: I1b96bf8b84368d6aad0c7aa600fe141b4f07435f
This option exists in VP8, and it was rewritten in VP9 to support
skipping on different partition levels. After prediction is done,
we can check if the residuals in the partition block will be all
quantized to 0. If this is true, the skip flag is set, and only
prediction data are needed in reconstruction. Based on DCT's energy
conservation property, the skipping check can be estimated in
spatial domain.
The prediction error is calculated and compared to a threshold.
The threshold is determined by the dequant values, and also
adjusted by partition sizes. To be precise, the DC and AC parts
for Y, U, and V planes are checked to decide skipping or not.
Test showed that
1. derf set:
when static-thresh = 1, psnr loss is 0.666%;
when static-thresh = 500, psnr loss is 1.162%;
2. stdhd set:
when static-thresh = 1, psnr loss is 1.249%;
when static-thresh = 500, psnr loss is 1.668%;
For different clips, encoding speedup range is between several
percentage and 20+% when static-thresh <= 500. For example,
clip bitrate static-thresh psnr time
akiyo(cif) 500 0 48.923 5.635s(50f)
akiyo 500 500 48.863 4.402s(50f)
parkjoy(1080p) 4000 0 30.380 77.54s(30f)
parkjoy 4000 500 30.384 69.59s(30f)
sunflower(1080p) 4000 0 44.461 85.2s(30f)
sunflower 4000 500 44.418 78.1s(30f)
Higher static-thresh values give larger speedup with larger
quality loss.
Change-Id: I857031ceb466ff314ab580ac5ec5d18542203c53
Removing unused constants, macros, and function declarations. Using
ROUND_POWER_OF_TWO macro, vp9_zero, vp9_copy where possible. Moving
#include from *.h to *.c. Merging for loops for motion vectors.
Change-Id: Ic3bf841764a2bb177128bb3a6d7aa8f68229cd13
Simplified the code that extracts and uses the motion
vectors for the 4 sub-partitions in rd_pick_partition.
Change-Id: Iaf698ef7ee3aef9edd59015e1ae065dd359b17d9
The feature that uses small partition results as a measure to skip
mode evaluation at larger partition requires the flags to be reset.
The reset was missing in the code path that calls rd_use_partition().
Change-Id: Ia0a3a0aee1a862b6e2333d596808db7c48033d50
Counts are separate from frame context. We have several frame contexts but
need only one copy of all counts.
Change-Id: I5279b0321cb450bbea7049adaa9275306a7cef7d
many structures use bw and bh and they have different meanings. This cl attempts
to start this clean up and remove unneccessary 2 step look up log and then
shift operations...
also removed partition type multiple operation code in bitstream.c.
Change-Id: I7e03e552bdfc0939738e430862e3073d30fdd5db
Moving common encoder/decoder code to update_tx_counts. Also renaming
vp9_get_pred_probs_tx_size to get_tx_probs2 and adding get_tx_probs to
call vp9_get_pred_context_tx_size inside read_selected_tx_size only once
(twice before).
Change-Id: Ia50247f3893de88ef8e9041b0d44be44a40aaa4d
At speed 2, due to the threshold scheme used, it is possible the rate
and distortion assigned with INT_MAX value. The patch added checking
to prevent the INT_MAX value is used in further calculation of RD
scores. The patch also changed the assertion in rd_use_partition() to
be mirror similar assertion in rd_pick_partition().
Change-Id: Idb52c543cc1e10abdf6e6a5d6e9cb535a42214dc
Adding loopfilter struct with fields from MACROBLOCKD and VP9Common.
Eventually it will be moved to vp9_loopfilter.h for better code structure.
Change-Id: Iaf5fb71c33719cdfa1b991f671caf071be9ea035
We would skip the rectangular blocks for sub8x8 partitions because
we would conclude that PARTITION_NONE was better than PARTITION_SPLIT,
however, that conclusion was made before we actually really tested
PARTITION_SPLIT.
Change-Id: I8fa91e59894badc1d8cee3ba8a49e40ae4c4a489
This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.
Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.
Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a
About 15% faster for bus (speed 0) first 50 frames @ 1500kbps, which
goes from 1min36 to 1min24. Results become slightly better (+0.2% on
derf/yt, +0.4% on hd), probably because of a bugfix for skipmode in
super_block_yrd(). Overall speed change (on derfraw300) is roughly
-13%. This can probably be improved further by caching best_yrd
between partition searches. Also, we might be able to get more
speedups by always doing PARTITION_NONE before PARTITIONS_SPLIT, not
just at the sb8x8 level.
Change-Id: I83736949ebd5b4a3b400ee688d7661913fefc98b
Current partition checking starts from small sizes, and then goes up
to large sizes. This experiment uses the small partitions' motion
estimation result, which is already available, to speed up the
large partition's motion estimation. We can decide to skip some
patition checkings if they are unlikely choices. We could use the
motion vector(MV) result as current partition's prediction MV, limit
the search range and reference frame.
Current result at speed 1:
psnr loss: 1.19% for stdhd, 0.287% for derf.
speed gain: 14% for sunflower(hd), 11% for akiyo.
Further improvement will be done later.
Change-Id: I5abfd070e9cace2e91e2a0247d1325df313887ab
Removing tile_rows and tile_columns from VP9Common, removing redundant
constants MIN_TILE_WIDTH and MAX_TILE_WIDTH, changing signature of
vp9_get_tile_n_bits.
Change-Id: I8ff3104a38179b2c6900df965c144c1d6f602267
Making implementation of vp9_set_pred_flag_{seg_id, mbskip} consistent
with vp9_get_segment_id without using confusing sub(a, b) macro. Passing
mi_row and mi_col to functions explicitly instead of replying on
mb_to_right_edge and mb_to_bottom_edge.
Change-Id: I54c1087dd2ba9036f8ba7eb165b073e807d00435
This speed feature allows the encoder to largely remove the spatial
dependency between blocks inside a 64x64 superblock, thereby removing
the need to repeatedly encode superblocks per partition type in the
rate-distortion optimization loop.
A major challenge lies in the intra modes tested in the rate-distortion
optimization loop. The subsequent blocks do not have access to the
reconstructed boundary pixels without the intermediate coding steps.
This was resolved by using the original pixels for intra prediction
in the rd loop, followed by an appropriately designed distortion
modeling on the quantization parameters. Experiments also suggested
that the performance impact is more discernible at lower bit-rate/psnr
settings. Hence a quantizer dependent threshold is applied to deactivate
skip of block coding.
For bus_cif at 2000 kbps,
speed 0: runtime 269854ms -> 237774ms (12% speed-up) at 0.05dB
performance loss.
speed 1: runtime 65312ms -> 61536ms, (7% speed-up) at 0.04dB
performance loss.
This operation is currently turned on in settings of speed 1.
Change-Id: Ib689741dfff8dd38365d8c1b92860a3e176f56ec
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
The resulting reconstruction is never used, thus it just wastes CPU
cycles. Reduces encode time of first 50 frames of bus (speed 0) @
1500kbps from 2min2.0 to 2min1.2, i.e. a 0.65% overall speedup.
Change-Id: I74755ca3aadc21e2be220f486259060bd4088c45
Overall, on all test sets, this gains about +0.2% on all metrics.
City is a clip where this really hurts (-1.0% on all metrics), I'm
not quite sure why yet. Maybe interesting to look into in the future.
Change-Id: I6f0eecb20e72f0194633270d30bf00d76d9eae78
Skips mode searches for intra and compound inter modes depending
on the best mode so far and the reference frames. The various
heuristics to be used are selected by bits from a flag. The
previous direction based intra mode search pruning is also absorbed
in this framework.
Specifically the flags and their impact are:
1) FLAG_SKIP_INTRA_BESTINTER (skip intra mode search for oblique
directional modes and TM_PRED if the best so far is
an inter mode)
derfraw300: -0.15%, 10% speedup
2) FLAG_SKIP_INTRA_DIRMISMATCH (skip D27, D63, D117 and D153
mode search if the best so far is not one of the closest
hor/vert/diagonal directions.
derfraw300: -0.05%, about 9% speedup
3) FLAG_SKIP_COMP_BESTINTRA (skip compound prediction mode
search if the best so far is an intra mode)
derfraw300: -0.06%, about 7-8% speedup
4) FLAG_SKIP_COMP_REFMISMATCH (skip compound prediction search
if the best single ref inter mode does not have the same ref
as one of the two references being tested in the compound mode)
derfraw300: -0.56%, about 10% speedup
Change-Id: I1a736cd29b36325489e7af9f32698d6394b2c495
sf->unused_mode_skip_lvl. Tests modes as normal for all
sizes at or below the given level. At larger sizes it skips
all modes that were not chosen at any smaller size.
Hence setting BLOCK_SIZE_SB64X64 is in effect off.
Setting BLOCK_SIZE_AB4X4 will only consider modes that
were chosen for one or more 4x4 blocks at larger sizes.
sf->reference_masking.
Do a test encode of the NONE partition at one size and create
a reference frame mask based on the best rd choice. In the
full search only allow this reference frame.
Currently it is testing 64x64 and repeats this in the full search.
This does not work well with Jim's Partition code just now and
is disabled by default.
Change-Id: I8f8c52d2ef4a0c08100150b0ea4155d1aaab93dd
This commit adds a speed feature where only squared partition are
evaluated in partition picking. Enable this feature in cpu-used 2
reduces encoding time by ~30%.
loss of compression:
-0.9% on cif set
-1.23% on stdhd
Change-Id: Ia6fad11210f0b78365abb889f9245604513be5b9
(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)
(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code
(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.
Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).
Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
This cl converts use partition from last frame to do the following:
if part is none,horz, vert -> try split
if part != none and one of the children is not split - try none
Change-Id: I5b6c659e35f3ac9f11c051b92ba98af6d7e8aa87
Signed-off-by: Jim Bankoski <jimbankoski@google.com>
Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.
Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6
This commit change the partition search order to allow checking of
rectangular partition to be done after square partitions. It also
added a speed feature to skip rectangular partition check when
NONE is better than SPLIT in RD sense.
This feature roughly speed up encoder by 1.5X with loss on compression
-0.91% on cif set
-0.56% on stdhd set
Change-Id: I0d2d06993041aa9ea9073fcc39c54f73a127dfa4
Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.
Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8
Each frame we reset all adaptive thresholds to MAX
rather than base. As modes are picked their thresholds
drop down.
Change-Id: Ia37f03a73003c2d9bfcda57edea07205e9a0e5e8
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
This uses variance to split partition. Variance is calculated using
nearest mv, always from last ref frame.
Change-Id: Idd015b4a9aa3bc82591759eac239680c07496896
This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.
This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.
Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3
Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.
Results: almost neutral
Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4
Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.
Also incorporates code for generating stats.
TODO: generate and incorporate new default stats
Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6
Refactors mbskip coding to be compatible with coding of the rest of
the symbols. Adds forward/backward adaptation and removes a lot of
the legacy code.
Results:
fast50: +1.6%
derfraw300: +0.317%
Change-Id: I395a2976d15af044d3b8ded5acfa45f6f065f980
The partition types of blocks sitting on the frame boundary are
constrained by the block size and the position of each sub-block
relative to the frame. Hence we use truncated probability models
to handle the coding of such information.
100 frames run:
yt 0.138%
Change-Id: I85d9b45665c15280069c0234ea6f778af586d87d
Changes to the coding of transform sizes, along with forward
and backward probability updates.
Results:
derf300: +0.241%
Context based coding of transform sizes will be in a separate
patch.
Change-Id: I97241d60a926f014fee2de21fa4446ca56495756
In the longer term the encoder should allow compound as long
as one of the buffers has opposite sign bias and as per the decoder
this buffer is then set as the fixed reference. However at the moment
the encoder and RD loop only supports the case where the ALTREF_FRAME
buffer (or third of the 3 allowed in any given frame) is the odd one out.
This patch fixes a bug that would allow compound inter and set
fixed ref to ALTREF_FRAME when it is not the odd one out.
Change-Id: Ic83a69486e088a147ba83a4aedc2a0042f6b3721
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.
Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.
Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f
This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.
Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9
Adds backward adaptation and differential forward updates of switchable
interpolation filter probabilities. Also adds some cosmetic cleanups
and minor fixes on mv_ref probabilities.
derfraw300: +0.353% (with most coming from switchable interp changes)
Change-Id: Ie2718be73528c945fd0d80cfd63ca2d9cb3032de
This speed 1 - uses variance threshold stolen from static-thresh
to determine split. Any superblock with greater than the variance
set by static thresh * quantizer index squared is split. In addition
transform size is set to largest size less than or equal to partition
size, sub pixel filter is set to normal, and only 12 modes are used
at all.
Change-Id: If7a2858ee70f96d1eb989c04fd87a332b147abef
We leave it in rdopt.c as a local define for now - this can be removed
later. In all other places, we remove it, thereby slightly decreasing
the size of some arrays in the bitstream.
Change-Id: Ic2a9beb97a4eda0b086f62c039d994b192f99ca5
This patch checks at the frame level to see if the previous
mode info context can be used. This patch eliminates the
flag check that was done for every mode and removes another
check that was done prior to every vp9_find_mv_refs().
Change-Id: I9da5e18b7e7e28f8b1f90d527cad087073df2d73
Also do per-partition motion vector referencing in <sb8x8 partitions,
and adjust mvref finding for sub8x8 partitions.
Change-Id: Id3ed1ed4d2a8910d11d327db6cc63b8eb79f941f
1) Added an initialization of rd_tx_select_threshs[].
2) Made updating transform size counts to be consistent
Change-Id: Iaa9d6c6be825b0364c9d61a9802873d01356815c
Move 4x4/4x8/8x4 partition coding out of experimental list.
This commit fixed the unit test failure issues. It also resolved
the merge conflicts between 4x4 block level partition and iterative
motion search for comp_inter_inter.
Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58
This commit changed the encoding and decoding of intra blocks to be
based on transform block. In each prediction block, the intra coding
iterates thorough each transform block based on raster scan order.
This commit also fixed a bug in D135 prediction code.
TODO next:
The RD mode/txfm_size selection should take this into account when
computing RD values.
Change-Id: I6d1be2faa4c4948a52e830b6a9a84a6b2b6850f6
This commit allows the rate-distortion optimization of intra coding
capable of supporting 8x4 and 4x8 partition settings.
It enables the entropy coding of intra modes in key frame using a
unified contextual probability model conditioned on its above/left
prediction modes.
Coding performance:
derf 0.464%
Change-Id: Ieed055084e11fcb64d5d5faeb0e706d30268ba18
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I296604bf73579c45105de0dd1adbcc91bcc53c22
The recursive partition type search is enabled down to 4x4, 4x8 and
8x4, followed by the corresponding rate-distortion optimization for
the per-partition encoding mode decisions.
The bit-stream writing/reading synchronized in supporting the
rectangular partition of 8x8 block.
This provides above 1% coding performance gains on derf.
To do next:
1. re-design the rate-distortion loop for inter prediction below 8x8.
2. re-design the rate-distortion loop for intra prediction below 4x4.
3. make the loop-filter aware of rectangular partition of 8x8 block.
4. clean the unused probability models.
5. update default probability values.
Change-Id: Idd41a315b16879db08f045a322241f46f1d53f20
This is a mostly-working implementation of an extra channel in the
bitstream. Configure with --enable-alpha to test. Notable TODOs:
- Add extra channel to all mismatch tests, PSNR, SSIM, etc
- Configurable subsampling
- Variable number of planes (currently always uses all 4)
- Loop filtering
- Per-plane lossless quantizer
- ARNR support
This implementation just uses the same contents as the Y channel
for the A channel, due to lack of content and general pain in
playing back 4 channel content. A later patch will use the actual
alpha channel passed in from outside the codec.
Change-Id: Ibf81f023b1c570bd84b3064e9b4b8ae52e087592
Deprecate set_block_index. Replace it with get_sb_index_ for
consistency with partition search and bit-stream writing/reading.
Use b_width/height_log2 instead of mi_width/height_log2, to support
4x4 resolution partition types.
Change-Id: Ic1e71981e163c669f7ea6b3c12b831c284c4a494
This commit allows the rate-distortion optimization recursion
at encoder to go down to 4x4 block size. It deprecates the use
of I4X4_PRED and SPLITMV syntax elements from bit-stream
writing/reading. Will remove the unused probability models in
the next patch.
The partition type search and bit-stream are now capable of
supporting the rectangular partition of 8x8 block, i.e., 8x4
and 4x8. Need to revise the rate-distortion parts to get these
two partition tested in the rd loop.
Change-Id: I0dfe3b90a1507ad6138db10cc58e6e237a06a9d6
Move set_partition_seg_context_ to common file. Use consistent
context setup conditions for partition probability model update at
encoder and decoder.
Change-Id: I24b7ed3b1c48e3d2568191a46b70136b99b67b1a
This commit enables the search for the optimal superblock
partition types in the recursion form. The intention is to
make the optimization process more concise and ready to
support partition down to 4x4 block size next.
Change-Id: Iae279a67df3a7cc372553c84c775bc4d2f3e4336
Make framebuffer allocations according to the chroma subsamping
factors in use. A bit is placed in the raw part of the frame header for
each of the two subsampling factors. This will be moved in a future
commit to make them part of the TBD feature set bits, probably only set
on keyframes, etc.
Change-Id: I59ed38d3a3c0d4af3c7c277617de28d04a001853
Update and buffer left/above partition information context per 8x8
block. This allows to further enable recursive partition down to
4x4 block size, and hence deprecating I4X4_PRED and SPLITMV.
This commit also fixes a context buffer swap/restore issue in 32x32
partition type search. This gives 0.1% performance gain for derf/yt.
Will refactor the superblock partition type search into recursion
form.
Change-Id: Ib61975aca5f12b78d8018481d7fa1393d085689b
This setup is now handled by vp9_build_intra_predictors()
when left_available and/or up_available is zero.
Change-Id: I59cec0ab95f8be69ce885fd20727510e4deef8a0
This allows removing a large number of transform size specific functions,
as well as supporting 444/alpha by routing all code through the
subsampling-aware path.
Change-Id: Ieb085cebe9f37f24fc24de179898b22abfda08a4
With this, encoder/decoder appear to match with sb8x8 experiment.
Needs some larger-scale testing.
Change-Id: I44d3cac37b3c98264985ed0a0fc763c30089aa64
Creates a common encode (subtract, transform, quantize, optimize,
inverse transform, reconstruct) function for all sb sizes, including
the old 16x16 path.
Change-Id: I964dff1ea7a0a5c378046a069ad83495f54df007
Don't allow i4x4 except for sb8x8 recursion step. Read only 4 (not 16)
i4x4 submodes if we are i4x4.
Change-Id: Iaaaced1a134006b2c96eed66f014300eae41e0ed
This doesn't affect the output, because in previous cases where the
values were uninitialized, this was because the mb_row/col is outside
the codable area, and thus encode_sb will test them for the next
decomposition-level, but return right after that on size-check. All
this does is prevent a warning in valgrind.
Change-Id: I90d8a29e6f8ebb2b0143684e08fe77ae3a0816b1
Work-in-progress, not yet ready for review. TODO items:
- bitstream writing (encoder) and reading (decoder)
- decoder reconstruction
Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081
Separate the decoding process of 4x4 block based coding (both intra
and inter) from decode_mb and move it into decode_atom_. This allows
to further move the rest per 16x16 block decoding of decode_mb into
decode_sb, and hence eventually deprecating decode_mb when SB8X8 is
enabled.
Change-Id: I678cb8007d8a57b792d7a23020edb0c74fbf4237
Separate the functionality of I4X4_PRED from decode_mb. Use
decode_atom_intra instead, to enable recursive partition of superblock
down to 8x8.
Change-Id: Ifc89a3be82225398954169d0a839abdbbfd8ca3b
This doesn't change output, because the argument isn't actually used
ATM. However, we should fix it for consistency.
Change-Id: I7b7326a8e92c0d411c999ec2c781204b516ed53d
Unify the tokenize_ function and enable configurable block size for
superblock 8x8. We are immigrating the functionalities of
macroblock handles into superblock ones, and eventually will remove
encode_mb and decode_mb. To be continued on detokenize_ module.
Change-Id: I9f81e8c2291082535cf5e0c4b662eb24fb7c8a7f
Output changes slightly because of a minor bug in (at least) the sb32x16
block2above tx16x16 tables that previously existed in vp9_blockd.c.
Change-Id: I624af28ac200a8322d64454cf05c79e9502968cc
This originally was "Removed update_blockd_bmi()". Now,
this patch removed bmi from blockd and uses the bmi found
in mode_info_context. Eliminates unnecessary bmi copies between
blockd and mode_info_context.
Change-Id: I287a4972974bb363f49e528daa9b2a2293f4bc76
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I593fb0715e74cd84b48facd1c9b18c3ae1185d4b
Function set_mb_row() and set_mb_col() do similar work and are always
called together, this commit merged them into a single function for
clarity and easy maintainence. This was a TODO item.
Change-Id: I956bd9ed6afb8b2b0469b20fd8bc893b26f8a0f3
This commit enables selecting probability models for recursive block
partition information syntax, depending on its above/left partition
information, as well as the current block size. These conditional
probability models are reasonably stationary and consistent across
frames, hence the backward adaptive approach is used to maintain and
update the contextual models.
It achieves coding performance gains (on top of enabling rectangular
block sizes):
derf: 0.242%
yt: 0.391%
hd: 0.376%
stdhd: 0.645%
Change-Id: Ie513d9673337f0d27abd65fb566b711d0844ec2e
Also some further simplification following removal
of top node code.
There is an issue in regards to the shared file vp8cx.h
in regard to the roi_map as this interface assumes that
there are only 4 segments. I have left the value here as
4 for now meaning that the roi_map interface is broken
for VP9.
Note that this change would have been easier if I hadn't
had to search for hard wire instances of the number 4
and <= 3.
Change-Id: Ia8b6deea4be4dbd20deb1656e689dd43a5f190e8
This commit moves the coeff storage from the MACROBLOCK struct to its
per-plane part. The next commit will remove the coeff member from the
BLOCK structure so that it is consistently accessed per-plane.
Also refactors vp9_sb_block_error_c and vp9_sb_uv_block_error_c to be
variable subsampling aware.
Change-Id: I18c30f87f27c3a012119b6c1970d5fa499804455
This commit enables rectangular block prediction of compound
inter-intra mode. It combines the mb/sb32/sb64 prediction functions
into a unified version with configurable block width and height.
This fixes the enc/dec mismatch of the codebase when
comp-interintra-pred is enabled.
Change-Id: I1d0db2f1f184007802df04fcd12b9dadb3189ff0
First in a series of commits making certain MACROBLOCK members
addressable per-plane. This commit also refactors the block subtraction
functions vp9_subtract_b, vp9_subtract_sby_c, etc to be
loops-over-planes and variable subsampling aware.
Change-Id: I371d092b914ae0a495dfd852ea1a3d2467be6ec3
Adds an experiment that codes an end-of-orientation symbol
for every eligible zero encountered in scan order.
This cleans out various other sub-experiments that were part
of the origiinal patch, which will be later included if found
useful.
Results are slightly positive on all sets (0.1 - 0.2% range).
Change-Id: I57765c605fefc7fb9d1b57f1b356843602abefaf
First in a series of commits moving the framebuffers pointers to
per-plane data, so that they can be indexed numerically rather than
by name.
Change-Id: I6e0d60fd4d51e6375c384eb7321776564df21775
Remove the unnecessary _s_ from their names, and add a new
vp9_recon_sb() that calls the y and uv variants.
Change-Id: I7ffaa5ff5605a8472cac2a53de8cf889353039a6
Use in-place buffers (dst of MACROBLOCKD) for macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.
Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df
Adds RD integration for 32x16, 16x32, 64x32 and 32x64 rectangular blocks.
Derf almost +0.6%, HD a little over +1.0%, STDHD +1.3%.
Change-Id: Id651fdb6a655fdbb5c47009757e63317acfb88a5
Enable recursive partition information coding from SB64X64 down to
MB16X16. The bit-stream syntax is now supporting rectangular block
sizes. It starts from SB64X64 and recursively describes the partition
type of the current block. If the partition type is PARTITION_NONE,
the block is coded as a single unit; if it is PARTITION_HORZ or
PARTITION_VERT, the block is segmented into two independently coded
rectangular units, with no further partition needed; otherwise, the
block is segmented into 4 square blocks. i.e., PARTITION_SPLIT case,
each can be potentially further partitioned.
Forward adaptive probability modeling is used for the partition
information coding, conditioned on the current block size.
Change-Id: I499365fb547839d555498e3bcc0387d8a3587d87
This flag was added to VP8 to allow a mode where MB-level skipping
was not allowed, saving a bit per mb. It was never used in practice,
and hasn't been tested in VP9, so remove it.
Change-Id: Id450ec6904c6d06c1919508e7efc52d05cde5631
Combine superblock inter predictors into a unified function that
allows configurable block width and height. The inter predictions
of block sizes smaller than 16x16 are handled differently. To be
continued on merging them later.
Change-Id: I14075959dd5e221f00c205c99ca35c1c31ef728e
The probabilities derived from these statistics are used in bitstream
writing; therefore, we should only do this when we actually decide to
use macroblock coding (over superblock coding). Derf gains +0.15%.
Change-Id: I196814c070a7c79889590658ce10a6eb07454389
The intra predictor supports configurable block sizes. It can handle
intra prediction down to 4x4 sizes, when enabled in BLOCK_SIZE_TYPE.
Change-Id: I7399ec2512393aa98aadda9813ca0c83e19af854
Rename pick_mb_modes to pick_mb_mode, since it now handles only a
single macroblock. This is consistent with pick_sb_mode handling a
single non-macroblock.
Change-Id: I896fdfa06436b2d8c24d6474718cc74420df6b3b
Merge various super_block_yrd and super_block_uvrd versions into one
common function that works for all sizes. Make transform size selection
size-agnostic also. This fixes a slight bug in the intra UV superblock
code where it used the wrong transform size for txsz > 8x8, and stores
the txsz selection for superblocks properly (instead of forgetting it).
Lastly, it removes the trellis search that was done for 16x16 intra
predictors, since trellis is relatively expensive and should thus only
be done after RD mode selection.
Gives basically identical results on derf (+0.009%).
Change-Id: If4485c6f0a0fe4038b3172f7a238477c35a6f8d3
Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
gives identical encoder results before and after. There are a few
macros for rectangular block sizes under the sbsegment experiment; this
experiment is not yet functional and should not yet be used.
Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728
The patch adds the flexibility to use standard EOB based coding
on smaller block sizes and nzc based coding on larger blocksizes.
The tx-sizes that use nzc based coding and those that use EOB based
coding are controlled by a function get_nzc_used().
By default, this function uses nzc based coding for 16x16 and 32x32
transform blocks, which seem to bridge the performance gap
substantially.
All sets are now lower by 0.5% to 0.7%, as opposed to ~1.8% before.
Change-Id: I06abed3df57b52d241ea1f51b0d571c71e38fd0b
