19 Commits

Author SHA1 Message Date
Yaowu Xu
7e89c102c4 vp9-highbitdepth -> vpx-highbitdepth
Change-Id: I1e90cf7ab4bb02c0ef119b0bd1596771edefedff
2016-08-05 15:41:33 -07:00
James Zern
3f5a2a8ee2 vp10/ratectrl.c: fix implicit float conversion
float->int as reported by -Wfloat-conversion

Change-Id: I3c55990821d922bda7a7600c00ae8d5dcc3cee94
2016-07-22 18:08:23 -07:00
Zoe Liu
054689b2bf A small refactor on the rate controller
Change-Id: Ie39e16de2457dd201121c62967e4ddaf5a05c33a
2016-07-19 13:55:14 -07:00
Wei-ting Lin
ccc9e7cfc6 Allow OVERLAY frames to use the show_exsiting_frame flag
ARF with zero strength temporal filter can be reused by setting the
show_existing_frame = 1, and in this case, there is no need to
refresh the reference frame buffer. However, we used the flag
"refresh_golden_frame" as the identifier for the starting point of a gf
group.

A new flags "is_arf_filter_off" is used to record if the filter with
strengrh zero is used.

Change-Id: I25971a760f6e1638d5147fe30488c48125512b1a
2016-07-18 17:15:33 -07:00
Zoe Liu
5805a14ca6 Merge bi-predictive frames to EXT_REFS
This patch removed the experiment of BIDIR_PRED and merged the feature
into the experiment of EXT_REFS:

(1) Each frame now has up to 6 reference frames, namely
    LAST_FRAME, LAST2_FRAME, LAST3_FRAME, GOLDEN_FRAME, (forward) and
    BWDREF_FRAME, ALTREF_FRAME (backward);
    LAST4_FRAME has been removed;
(2) First pass still keeps the 8 updates:
    KF_UPDATE, LF_UPDATE, GF_UPDATE, ARF_UPDATE, OVERLAY_UPDATE, and
    BRF_UPDATE, LAST_BIPRED_UPDATE, BI_PRED_UPDATE;
(3) show_existing_frame==1 is supported in the experiment of EXT_REFS;
(4) New encoding modes are added for both single-ref and compound cases,
    through the use of the 2 extra forward references (LAST2 & LAST3)
    and the 1 extra backward reference (BWDREF).

RD performance wise, using Overall PSNR: Avg/BDRate
        Bipred only      Prev EXT_REFS    Current EXT_REFS with bipred
lowres: -3.474/-3.324    -1.748/-1.586    -4.613/-4.387
derflr: -2.097/-1.353    -1.439/-1.215    -3.120/-2.252
midres: -2.129/-1.901    -1.345/-1.185    -2.898/-2.636

If in vp10/encoder/firstpass.h, change BFG_INTERVAL from 2 to 3, i.e. to
use 2 bi-predictive frames than 1, a further improvement may be
obtained:
                 Current EXT_REFS with bipred
        1 bi-predictive frame    2 bi-predictive frames
lowres: -4.613/-4.387            -4.675/-4.465
derflr: -3.120/-2.252            -3.333/-2.516
midres: -2.898/-2.636            -3.406/-3.095

Change-Id: Ib06fe9ea0a5cfd7418a1d79b978ee9d80bf191cb
2016-06-17 12:43:39 -07:00
Zoe Liu
e89ca180c2 Make the bi-predictive frame group interval adjustable
This is for the bidir-pred experiment. Previously the length of the
bi-predictive frame group interval is fixed at 2, i.e. one
bi-predictive frame may be inserted every other frame. This patch
makes the length adjustable, i.e. any positive number may be
specified, but the use of the backward ref will be turned off if the
bi-predictive frame group interval is larger than the golden frame
group.

Further, an additional rate factor level has been added:
INTER_LOW
, which applies to LAST_BIPRED_UPDATE frames that are not used as
references.

Change-Id: I5514d34a64dd486bbb5756c2d0612946f598a789
2016-05-28 16:46:45 -07:00
Zoe Liu
cf5083d4cd Added an experiment "bidir_pred" for backward prediction
Major parts have been implemented as follows:
(1) Added BRF_UPDATE, LASTNRF_UPDATE, and NRF_UPDATE in firstpass.c;
(2) Added the handling for the scenario of
"cpi->common.show_existing_frame == 1" at the encoder;
(3) Added a new reference frame of BWDREF_FRAME;
(4) Have bwd-ref work with upsampled references.

Note that when the experiment of "ext_refs" turned on, this experiment
will be turned off automatically currently.

RD performance in Overall PSNR has been improved, compared against the
VP10 baseline:

lowres: Avg -3.312; BDRate -3.154
derflr: Avg -1.927; BDRate -1.176
midres: Avg -2.149; BDRate -2.001
hdres : Avg -0.567; BDRate -0.588

Change-Id: I4c06ff51cc20194bffbd4d2346e57ba3dcf6b62c
2016-05-24 13:55:57 -07:00
paulwilkins
99309004bf Fixed interval, fixed Q 1 pass test patch.
For testing implemented a fixed pattern and delta, 1 pass,
fixed Q, low delay mode.

This has not in any way been tuned or optimized.

Change-Id: Icf9b57c3bb16cc5c0726d5229009212af36eb6d9
2015-12-15 15:33:25 +00:00
paulwilkins
9ce611a764 1 pass VBR mode bug fix.
(copied from VP9)

The one pass VBR mode selects a Q range based on a
moving average of recent Q values. This calculation
should have been excluding arf overlay frames as these
are usually coded at the highest allowed value. Their
inclusion skews the average and can cause it to drift
upwards even when the clip as a whole is undershooting.

As such it can undermine correct adaptation of the allowed
Q range especially for easy content.

Change-Id: I9e12da84e12917e836b6e53ca4dfe4f150b9efb1
2015-12-15 15:02:40 +00:00
paulwilkins
9d85ce8e0c Fix bug when overlaying middle arfs in multi-arf groups.
Fix copied over from VP9 master to VP10 master.
Do not reset the alt ref active flag when overlaying the middle
arf(s) of a multi arf group.

Change-Id: I1b7392107e7c675640d5ee1624012f39cc374c58
2015-12-07 15:23:46 +00:00
Johann
c5f11912ae Include vpx_dsp_common.h when using VPXMIN/MAX
Change-Id: I2e387a06484a06301f3cd6600c4ba2f4335b61ee
2015-08-31 14:36:35 -07:00
Yunqing Wang
c147c4d65c vp10 cleanup: remove svc code
Spatial/temporal svc code was removed. Verified using Borg test,
and the results before and after the change are matching.

Change-Id: I4c2ee5cd560428e3e50be02e57e5871ef4246390
2015-08-28 11:53:32 -07:00
James Zern
5e16d397bd vpx_dsp_common: add VPX prefix to MIN/MAX
prevents redeclaration warnings;
vp8 has its own define which will be resolved in a future commit

Change-Id: Ic941fef3dd4262fcdce48b73075fe6b375f11c9c
2015-08-26 20:11:32 -07:00
Yunqing Wang
1c0769107b vp10 cleanup: remove nonrd and real-time code
Code cleanup.

Change-Id: I668bd5a4e5fbe96969d51d9ee777fc5f1d8abfe6
2015-08-26 13:36:54 -07:00
hui su
a4c7e92b81 VP9EncoderConfig -> VP10EncoderConfig
Change-Id: Id691d8a9d4aa137e8de73fe680016fd4fd070e6e
2015-08-16 17:24:35 -07:00
Yaowu Xu
26a9afc32c VP9_COMP -> VP10_COMP
Change-Id: I83b5c69621f9f28b742e5b13517d4e5b99c6cd26
2015-08-13 11:37:17 -07:00
Yaowu Xu
fc7cbd1f60 VP9_COMMON -> VP10->COMMON
Change-Id: I651b7bee90f33581368853da81f9622805ccc0ea
2015-08-13 09:58:26 -07:00
Jingning Han
3acfe46e8d Sync vp10 with vpx_ports/system_state.h
Change-Id: Ic5004f8bdc1c2b025b598e80374ee1f286ea95ee
2015-08-12 09:21:25 -07:00
Jingning Han
54d66ef165 Remove vp9_ prefix from vp10 files
Remove the vp9_ prefix from vp10 file names.

Change-Id: I513a211b286a57d6126fc1b0fbfd6405120014f1
2015-08-11 21:24:08 -07:00