This commit changed to enable the usage 8x8 transform for all frame
type, all resolution and all quantizer range. This has an overall
benefit .2% to .3% in term of compression, but more importantly,
the difficult clips benefits much more, up to 2% to 3% on clips
like football, harbour and so on.
We observed some weird humps on very high end on a couple of youtube
clips, but have determined the underly cause was the aggressive zbin
having an effect of lowering rate with lower quality, which have
an impact on slide show clips around 60DB.
The commit does not change the association between prediction mode
and transform size.
Change-Id: I33043bdce6207528ae00b4a4b26d8ff63cfea1f4
This is to prevent the evaluation of a mode from using values left
over from a mode evaluated prior in the loop.
Change-Id: Ife2c6ceb76d2f7365fd262515d3ae48229033c2d
(see Change I9b2ccc88: Makes all mode token tables const)
Further remove runtime table initialization and use
precalculated const data. Data footprint reduced
by 4112 bytes.
Change-Id: Ia3ae9fc19f77316b045cabff01f6e5f0876a86ab
Ensure that RTCD function pointers are set at most once, to silence
some data race warnings. Implementation provided for POSIX threads and
Win32, with the prior unsynchronized behavior left in place for other
platforms.
Change-Id: I65c5856df43ef67043b3d5f26ddafddd8fcb2f7e
We can get rid of all remaining global initializers now:
vp8_scale_machine_specific_config()
vp8_initialize()
vp8dx_initialize()
Change-Id: I2825cea5d1c01ad9f6c45df49a0f86d803bfeb69
Mode token tabels precalculated in entropymode.c.
Removes vp8_initialize_common()as all common global data
is precalculated const now.
Change-Id: I9b2ccc883e4f618069e1bc180dad3a823394eb73
With the NEWENTROPY experiment enabled encoding certain clips
produced invlid bitstreams, or files that had a high degree
of artefacts.
This was the results of pointers in MACROBLOCKD not being
setup correctly (mode_info_context and prev_mode_info_context).
Change-Id: Ice13e1efa8bd122997d2f8f3f1e761c6c16e0403
These contexts need to be saved and restored for recode, otherwise
encoder/decoder mismatch happens for some clips (eg._mobcal 720p)
Change-Id: Ic65cfa0bf56ed0472ecab962ce31394d59d344bf
Removes all runtime initialization of global data in tokenize.c.
DCT token and cost tabels are pre-generated.
Second patch in a series to make sure code is reentrant.
Change-Id: Iab48b5fe290129823947b669413101f22a1bcac0
Removes all runtime initialization of global data in entropy.c.
Precalculated values are used for initializing all entropy related
tabels.
First patch in a series to make sure code is reentrant.
Change-Id: I9aac91a2a26f96d73c6470d772a343df63bfe633
When producing an invisible ARF, the time stamp counters aren't
updated since the last time stamp is seen by the codec twice. The
prior code was trapping this case with refresh_alt_ref, but this isn't
correct for other uses of the ARF. Instead, use the show_frame flag.
Change-Id: If67fff7c6c66a3606698e34e2fb5731f56b4a223
Added code to save the coding context in vp8_rd_pick_inter_mode
when the coding mode is forced to ARF(0,0).
Also, modified the MV bounds computation to comply with the
change in MV border from 32 to 64 pixels.
Change-Id: I96963a6f5f4d04ce84c807ae11e0635177c3ad6c
Local variable offsets are now consistent for the functions,
removed unused parameters, reworked the assembly to eliminate
stalls/instructions.
Change-Id: Iaa37668f8a9bb8754df435f6a51c3a08d547f879
Turning off the interpolation filter selection based on edge
proportion. This heuristics has not been working as well as
expected and I have started a more rigorous investigation into
this. We can turn this off for now since it is unnecessarily
slowing things down.
Rebase.
Change-Id: Ic5958b2b3a35ec2d8eb73b6d81617ca8fbe07e74
This commit tries to address an issue related to the oddity shown on
HD _mobcal clip, where some rather ugly blocks shown in the second
frame at low-mid bit rates if the third frame is not made a key frame
by he encoder. The fixes include: 1) made calls to sad_16x16 to be
consistent with function prototype. 2) remove the error bias to intra
and golden in mbgraph search. 3) changed the error accumulation on
inter_segment encoding to avoid potential out-of-range. 1) has no
effect on encoding results.
Encoding test show that the overall effect of the commit helps about
.2%(HD) to .3%(cif)
Change-Id: I930975a2d0c06252f01c39e0a02351529774e30b
The commit removed a limit on key frame detection, which caused a big
drop in all metric measurements for standard HD clip such as _mobcal.
This single change helps two standard HD clips by a huge amount, which
help the overall std-hd set by 2.4% (glb psnr), 0.9% (avg_psnr), 2.1%
(vpxssim).
In the result page:
http://pafr9.prod.google.com:26163/?/cns/rc-d/home/on2-prod/sunkaras/borg-test/yaowu
2012_04_02_1649_yaowu_bugfix_std-hd
2012_04_03_1452_yaowu_hump_std-hd
represent the encoding test results and std-hd set prior and after this
commit respectively.
Change-Id: Ie4313e317c737ea0e699c3a7919c1376744baa1a
This commit has made macro_block_yrd_8x8 and macro_block_yrd_8x8 to
take same parameters. It also removed a few unnecessary shifts that
has the potential to create out-of-range distortion values.
Change-Id: I4ec5afb307c3685c2a67a07c2850f0927d214455
Some code re-factored / moved to allow the main
pack operation inside the recode loop so that the
size estimate is accurate.
Deletion of some redundant code relating to one pass.
Aproximate improvement over March 27 code base:
Derf 0.0%, YT 0.5%, YThd 0.3% Std_hd 0.25%
Change-Id: Id2d071794ab44f0b52935f6fcdb5733d09a6bb86
Some adjustments to zbin for t8x8.
Changes to rules for sizing forced key frames.
Some extra stats output in tmp.stt.
Approximate gain on YT-hd set 0.5%
There are still issues in sizing key frames and gf/arf frames
when the image is largely static. These in part relate to
problems with cost estimates in the recode loop.
Change-Id: I6f0159dc8a8faeab4115a19c668d442491619a68
This is the first patch to add superblock (32x32) coding
order capabilities. It does not yet do any mode selection
at the SB level, that will follow in a further patch.
This patch encodes rows of SBs rather than
MBs, each SB contains 2x2 MBs.
Two intra prediction modes have been disabled since they
require reconstructed data for the above-right MB which
may not have been encoded yet (e.g. for the bottom right
MB in each SB).
Results on the one test clip I have tried (720p GIPS clip)
suggest that it is somewhere around 0.2dB worse than the
baseline version, so there may be bugs.
It has been tested with no experiments enabled and with
the following 3 experiments enabled:
--enable-enhanced_interp
--enable-high_precision_mv
--enable-sixteenth_subpel_uv
in each case the decode buffer matches the recon buffer
(using "cmp" to compare the dumped/decoded frames).
Note: Testing these experiments individually created
errors.
Some problems were found with other experiments but it
is unclear what state these experiments are in:
--enable-comp_intra_pred
--enable-newentropy
--enable-uvintra
This code has not been extensively tested yet, so there
is every likelihood that further bugs remain. I also
intend to do some code cleanup & refactoring in tandem
with the next patch that adds the 32x32 modes.
Change-Id: I1eba7f740a70b3510df58db53464535ef881b4d9
This patch includes:
1. fixes to disable block based termporal mixing when motion
is detected (because this version of mfqe only handles zero motion).
2. The criterion used for determining whether to mix or
not are changed to use squared differences rather than
absolute differences.
3. Additional checks on color mismatch and excessive block
flatness added. If the block as decoded has very low activity
it is unlikely to yield benefits for mixing.
Change-Id: I07331e5ab5ba64844c56e84b1a4b7de823eac6cb
In cases where you have a flat background occluded by a moving object
of similar luminosity in the foreground, it was likely that the
foreground blocks would persist for a few frames after the background
is uncovered. This is particularly noticable when the object has a
different color than the background, so add the chroma planes in as an
additional check.
In addition, for block sizes of 8 and 16, the luma threshold is
applied on four subblocks independently, which helps when only part of
the background in the block has been uncovered.
This fixes issue #392, which includes a test clip to reproduce the
issue.
BUG=392
Change-Id: I2bd7b2b0e25e912dcac342e5ad6e8914f5afd302
Reduced the size of the struct by 8 bytes, which would be
a memory savings of 64800 bytes for 1080 resolutions. Had
an extra byte, so created an is_4x4 for B_PRED or SPLITMV
modes. This simplified the mode checks in
vp8_reset_mb_tokens_context and vp8_decode_mb_tokens.
Change-Id: Ibec27784139abdc34d4d01f73c09f43e9e10e0f5
Found this bug while tracking down some anomalies in my experiments.
Since vp8_cost_one and vp8_cost_zero return unsigned int, the
bit shift by 8 will be incorrect if the value is negative.
I am cautiously optimistic that this fix will make the prob
updates more correct and somewhat improve results across the board.
But the update probabilities will need to be retuned I think.
Patch 2: Adding more of the same fixes using a macro.
Change-Id: I1a168f040e74e8c67e7225103b1c2af9a611da49
This new vp8_decode_mb_tokens() uses a modified version of
WebP's GetCoeffs function. For now, the dequant does not
occur in GetCoeffs.
Tests showed performance improvements up to 2.5% depending
on material.
Change-Id: Ia24d78627e16ffee5eb4d777ee8379a9270f07c5
Adds logic to disable mfqe for the first frame after a configuration
change such as change in resolution. Also adds some missing
if CONFIG_POSTPROC macro checks.
Change-Id: If29053dad50b676bd29189ab7f9fe250eb5d30b3
When ac_yquant>171, a key frame is enabled to use 8x8 transform. In
such case, MBs with DC_PRED or TM_PRED are selected to use T8x8. This
change helped the full STD-HD set by ~.1% or so, which is reasonable
considering how often key frame occurs in these encodings.
Change-Id: Id17009ef6327252177b19e6bf0d6628827febaf1
Deprecate fast quant and strict_quant code.
Small effect on quality as fast was used in first pass but the
effect is basically neutral across the derf set.
The rationale here is to reduce the number of code paths for
now to make experimentation easier. Optimized and fast code
options can be re-introduced later along with other encode
speed options.
Change-Id: Ia30c5daf3dbc52e72c83b277a1d281e3c934cdad
