Changes relating to Issue 411
Removed code that was clearing down the segmentation data each
frame.
Added range/parameter checking in vp8_set_roimap(); Return error
if called when cyclic_refresh is enabled.
Correct setup_features() so that it sets or clears the segment update
flags as appropriate.
Change-Id: Ib31ac53006640ddf1ba7b9ec8f8b952e3eff860a
Soft enable runtime cpu detect for armv7-android target, so that it
can be disabled and remove dependency on 'cpufeatures' lib.
Change the arm_cpu_caps implementation selection such that 'no rtcd' takes
precedence over system type.
Switch to use -mtune instead of -mcpu. NDK was complaining about
-mcpu=cortex-a8 conflicting with -march=armv7-a, not sure why.
Add a linker flag to fix some cortex-a8 bug, as suggested by NDK Dev
Guide.
Examples:
Configure for armv7+neon:
./configure --target=armv7-android-gcc \
--sdk-path=/path/to/android/ndk \
--disable-runtime-cpu-detect \
--enable-realtime-only \
--disable-unit-tests
...armv7 w/o neon:
./configure --target=armv7-android-gcc \
--sdk-path=/path/to/android/ndk \
--disable-runtime-cpu-detect \
--enable-realtime-only \
--disable-neon \
--cpu=cortex-a9 \
--disable-unit-tests
Change-Id: I37e2c0592745208979deec38f7658378d4bd6cfa
The function vp8_post_proc_down_and_across_c takes the
stride of both the src and dst images as parameters, but
assumes that they are the same.
I modified the code to use the correct strides, as the
assembler versions of these functions do.
Change-Id: I222715b774cd071b21c15a4b0d2f4aef64a520de
vpx uses symbols in libm and thus we need to provide an indication to
the user of libvpx that if they want to link against libvpx they must
also link against libm.
Change-Id: I31d4068bf7f6f5b1fd222bcdf9e6a1a92fb6696f
Avoid a pthreads dependency via pthread_once() when compiled with
--disable-multithread.
In addition, this synchronization is disabled for Win32 as well, even
though we can be sure that the required primatives exist, so that the
requirements on the application when built with --disable-multithread
are consistent across platforms.
Users using libvpx built with --disable-multithread in a multithreaded
context should provide their own synchronization. Updated the
documentation to vpx_codec_enc_init_ver() and vpx_codec_dec_init_ver()
to note this requirement. Moved the RTCD initialization call to match
this description, as previously it didn't happen until the first
frame.
Change-Id: Id576f6bce2758362188278d3085051c218a56d4a
This patch incorporates adaptive entropy coding of coefficient tokens,
and mode/mv information based on distributions encountered in a frame.
Specifically, there is an initial forward update to the probabilities
in the bitstream as before for coding the symbols in the frame, however
at the end of decoding each frame, the forward update to the
probabilities is reverted and instead the probabilities are updated
towards the actual distributions encountered within the frame.
The amount of update is weighted by the number of hits within each
context.
Results on derf/hd/std-hd are all up by 1.6%.
On derf, the most of the gains come from coefficients, however for the
hd and std-hd sets, the most of the gains come from the mode/mv
information updates.
Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
This commit is to remove two arrays, which contain the probabilities
of how likely each probability in coef_probs table is updated. The
commit changed to use a fixed number "252".
Surprisedly, the overall impact on quality is close to zero, which
basically says the two big static arrays are not helpful at all.
derf: -0.016%, -0.020%
std-hd: 0.000%, -0.013%
yt: -0.022%, +0.007%
yt-hd: -0.038%, +0.034%
Change-Id: Ifee94d28a37dcab4f1d2b994bd5b07575be42b72
This commit added the ability to accumulate the coef stats across
different encodings using an intermediate binary stats files. The
accumulation happens only the binary stats file exists in current
directory. The encoder needs to be built with "ENTROPY_STATS" to
allow the output. The commit also fixed a few formating issues in
output stats file.
Change-Id: Ib1a41180aa554845cf51e4421a230b128a3a82b4
Changes to calculation of sr_coded_error to include 0,0 case.
Experimental use of sr_coded_error in calculating correction factor
for estimating the allowable Q range.
Reinstated some code needed for calculating section_intra_rating.
Add flash detection in calculation of KF boost
Increased tolerance in testing candidate key frames (needed with
longer motion search as this tends to slightly increase inter %.
Zbin changes for 8x8.
Other minor adjustments, refactoring and bug fixes.
Reinstated some motion break out clauses in boost loop
as their removal hurt a few 50fps clips badly in the std set.
It may be possible to remove them again later if a better way
can be found of preventing overly long gf intervals.
Change-Id: Iee686d0c31072828bb1ccd2bc63f5f1c7c548ea2
Allows building the library with the gcc -pedantic option, for improved
portabilty. In particular, this commit removes usage of C99/C++ style
single-line comments and dynamic struct initializers. This is a
continuation of the work done in commit 97b766a46, which removed most
of these warnings for decode only builds.
Change-Id: Id453d9c1d9f44cc0381b10c3869fabb0184d5966
Frame dropping decision is made by evaluating both current frame
and next frame's buffer_level. If both buffer_levels are less
than drop_mark, next frame is dropped. When frame dropping is
over, namely, buffer_level becomes normal again, we need to
reset decimation_count to 0.
Change-Id: Iae182612e61e0da367fbd43afdc90738d975d1a3
The logic for spatial resizing is done after the Q is selected for the
frame. This causes a problem that the Q we select for the (resized)
key frame may be based on a different resolution than the frame we
will encode.
This fix is to ensure that, when resize is on, the selected Q is still
based on the resolution of the frame to be encoded.
Change-Id: Ia49a9eac5f64e48d1c00dfc7ed4ce26fe84d3fa1
The change in assembly offset files to define values as const int broke
Windows build, because the variables are stored in .rdata section instead
of .data section.
This CL changes the integer peeking from .data to .rdata.
Change-Id: I87e465ddcc78d39ec29f3720ea7df0ab807d5512
This change is to allow obj_int_extract to extract all integers
in the data segment. With the const keyword these variables are
forced into the .rodata segment even for zero variable value.
We had a problem before that zero valueed variables would get
assigned to BSS segment that fooled obj_int_extract to give
incorrect values.
Change-Id: Icd94f80a8ab356879894ca508bf132d20b865299
Update the Visual Studio builds to support the new monolithic unit
test binary.
Includes minor semi-cosmetic refactoring of solution.mk, as the
%vpx.vcproj match is no longer appropriate given the test_libvpx
target.
Change-Id: I29e6e07c39e72b54a4b3eaca5b9b7877ef3fb134
Variables m & mi were being dereferenced when they might
hold invalid values.
The fix is simply to move these dereferences to after the
point at which mb_row and mb_col are tested for validity.
Change-Id: Ib16561efa9792dc469759936189ea379d374ad20
