The lower complexity modes may not generate a keyframe automatically.
This behavior was found when running under Valgrind, as the slow
performance caused the speed selection to pick lower complexities than
when running natively. Instead, use a fixed complexity for the
realtime auto keyframe test.
Affected tests:
AllModes/KeyframeTest.TestAutoKeyframe/0
Change-Id: I44e3f44e125ad587c293ab5ece29511d7023be9b
This unit test tests vp8_sixtap_predict function against preset
data and random generated data. The test against preset data
checks the correctness of the functions, and the test against
random data checks if the optimized six-tap predictor functions
generate matching result as the c functions. It tests the
following functions:
vp8_sixtap_predict16x16_c
vp8_sixtap_predict16x16_mmx
vp8_sixtap_predict16x16_sse2
vp8_sixtap_predict16x16_ssse3
vp8_sixtap_predict8x8_c
vp8_sixtap_predict8x8_mmx
vp8_sixtap_predict8x8_sse2
vp8_sixtap_predict8x8_ssse3
vp8_sixtap_predict8x4_c
vp8_sixtap_predict8x4_mmx
vp8_sixtap_predict8x4_sse2
vp8_sixtap_predict8x4_ssse3
vp8_sixtap_predict4x4_c
vp8_sixtap_predict4x4_mmx
vp8_sixtap_predict4x4_ssse3
Change-Id: I6de097898ebca34a4c8020aed1e8dde5cd3e493b
This is to avoid a rare encoder/decoder mismatch for MB using SPLITMV
mode. In decoder, the UV mv can be determined to need clamp, but the
flag is never set in encoder motion vector selection process, and the
clamp is not done in encoding in encoder.
Change-Id: I60520d3f790354c7855dadf03f0978ea9b77e2c0
This patch fixed issue 458 by calling copy function when both
offsets are 0, which guarantees the SSSE3 functions output
same result as the c function for all possible offsets.
Change-Id: I209aec7a4c6b3362db2646a8887c1038493b6496
xd->subpixel_predict16x16 is called in first pass, but isn't
initialized in first pass, which causes segfault. This patch
fixed that problem.
Change-Id: Ibd2cad4e2d32ea589fc3e0876d60d3079ae836e7
We need an easy way to build the unit test driver without running the
tests. This enables passing options like --gtest_filter to the
executable, which can't be done very cleanly when running under
`make test`.
Fixed a number of compiler errors/warnings when building the tests
in various configurations by Jenkins.
Change-Id: I9198122600bcf02520688e5f052ab379f963b77b
This commit adds lossless compression capability to the experimental
branch. The lossless experiment can be enabled using --enable-lossless
in configure. When the experiment is enabled, the encoder will use
lossless compression mode by command line option --lossless, and the
decoder automatically recognizes a losslessly encoded clip and decodes
accordingly.
To achieve the lossless coding, this commit has changed the following:
1. To encode at lossless mode, encoder forces the use of unit
quantizer, i.e, Q 0, where effective quantization is 1. Encoder also
disables the usage of 8x8 transform and allows only 4x4 transform;
2. At Q 0, the first order 4x4 DCT/IDCT have been switched over
to a pair of forward and inverse Walsh-Hadamard Transform
(http://goo.gl/EIsfy), with proper scaling applied to match the range
of the original 4x4 DCT/IDCT pair;
3. At Q 0, the second order remains to use the previous
walsh-hadamard transform pair. However, to maintain the reversibility
in second order transform at Q 0, scaling down is applied to first
order DC coefficients prior to forward transform, and scaling up is
applied to the second order output prior to quantization. Symmetric
upscaling and downscaling are added around inverse second order
transform;
4. At lossless mode, encoder also disables a number of minor
features to ensure no loss is introduced, these features includes:
a. Trellis quantization optimization
b. Loop filtering
c. Aggressive zero-binning, rounding and zero-bin boosting
d. Mode based zero-bin boosting
Lossless coding test was performed on all clips within the derf set,
to verify that the commit has achieved lossless compression for all
clips. The average compression ratio is around 2.57 to 1.
(http://goo.gl/dEShs)
Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
Added the ability to optionally filter the prediction data
when inter modes are selected (excludes SPLITMV, for now).
The mode selection loop considers both the filtered and
non-filtered prediction data when choosing mode. The filter
can be turned on/off at the frame-level, or signaled for
each MB.
Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822
Incorporates mv_ref, mbsplit and second_mv into the adaptive
entropy framework. The mv_ref framework has been modified from
before.
Adds some clean-ups and fixes.
Results with the adaptive entropy experiment are currently up by
+1.93% on derf; +2.33% std-hd and +1.87% yt-hd.
Fixed a nasty intermittent bug.
Change-Id: I4b1ac9f9483b48432597595195bfec05f31d1e39
Fixed the quantifier that optionally matches a quote before the
filename. This was originally reported in the homebrew project[1].
Note that this fix is different than patch posted there, as there are
some platforms that don't have the quote, so it needs to be included
in the expression optionally.
[1]: https://github.com/mxcl/homebrew/issues/12567#issuecomment-6434000
Change-Id: Ibf2ed93ce169d80932e877f942dc4eeb03867f8b
Update the comment that defines the allowed ranges for
delta_q and delta_lf that can be used with segmentation.
Change-Id: Ie56ad6f946704259e03ffd49921a4cfb7e1e2f1f
The commit introduces a make target 'testdata' that downloads the
required test data from the WebM project website. The data will also
be downloaded if invoking `make test` but is not a strict requirement
for only building the test executable.
The download directory is taken from the LIBVPX_TEST_DATA_PATH
environment variable, or may be specified as part of the make command.
If unset, it defaults to the current directory. It's expected that
most developers will want to set this environment variable to a place
outside their source/build trees, to avoid having to download the data
more than once.
To add test data file:
1) add a line to test/test.mk:
LIBVPX_TEST_DATA-yes += foo-bar-file.y4m
2) add its sha1sum to the test/test-data.sha1 file in the following
format:
528cc88c821e5f5b133c2b40f9c8e3f22eaacc4c foo-bar-file.y4m
3) upload the file to the website
$ gsutil cp foo-bar-file.y4m gs://downloads.webmproject.org/test_data/libvpx
This implementation will check the integrity of the test data
automatically if the `sha1sum` executable is available.
Change-Id: If6910fe304bb3f5cdcc5cb9e5f9afa5be74720d2
This is a unit test for the post-processing functions:
- vp8_post_proc_down_and_across_c
- vp8_post_proc_down_and_across_mmx
- vp8_post_proc_down_and_across_xmm
Change-Id: Iec3e690327b17470209c00417835473f6d9a35d6
Disable unit-tests. The logging in GTest would need to be adjusted.
Restructure ARM cpu detection. Flatten if-else logic.
Change #if defined(HAVE_*) to #if HAVE_* because we only need to check
for features that the library was actually built with. This should have
been harmless, as disabled feature sets wouldn't have any features to
call.
Change-Id: Iea21aa42ce5f049c53ca0376d25bcd0f36f38284
